Topic: Pull Back Bars (Read 5747 times)

DesertHOG · « **Reply #15 on:** January 03, 2011, 09:28:10 PM »

Was gonna say.. be careful to make sure they work. I just upgraded to the Yaffy OEM Monkey Bars for my FLTRUSE. It was an extremely tight fit according to the tech at my dealer. You have to take into account;

Fly by Wire
Heated Grips
Control Wiring
GPS Wiring and
Hydraulic Cabling can be a concern too.

Good Luck,
DesertHOG

Beemer · « **Reply #16 on:** January 05, 2011, 12:01:46 PM »

If you ever pull the wiring out of the bars...for any reason, I suggest you cut off the original HD black/shiny wire sheathing and replace it with heat-shrink. It is as strong if not more than the original and gives you all kinds extra of room to run either the stock HD heated grip wires or the Heat Demons.

Author Topic: Pull Back Bars (Read 5747 times)

DesertHOG

Re: Pull Back Bars

Beemer

Re: Pull Back Bars