www.CVOHARLEY.com

Custom Vehicle Discussions => Screamin’ Eagle® Dyna® Fat Bob => Topic started by: kuzie75 on June 05, 2014, 02:53:43 PM

Title: Converting Front Control to Mid Control Fatbob CVO 2009
Post by: kuzie75 on June 05, 2014, 02:53:43 PM

Hi,

Is there anybody had experience converting Front control to mid control?

Title: Re: Converting Front Control to Mid Control Fatbob CVO 2009
Post by: Landshark on June 06, 2014, 08:02:59 PM

I did the conversion on mine and it was the best think I ever did.  I know a lot of people love forward controls but they have never worked for me.  The main things you will have to do is replace the inner and outer primary since the shift mechanism goes through them.  I picked up all the standard mid controls and foot pegs as take offs on ebay.  The existing shift lever from the forward controls bolts right on to the new hardware.  You will need the brake pedal and the shifting parts from a stock Dyna.  Your foot pegs will bolt to new hard ware but I left the forward parts without the rods etc and use them as highway pegs.  PM me if you need further info.  I will attached a picture to show the finished product.