so like the title says I'm doing a build. what i have is my 2000 Screaming eagle roadglide 95" stock bottom end with S&S 4 3/8 stroker flywheels, stock 2004 CVO 103 cylinders and pistons and the stock CVO 103+ heads with the script on them in my bike. with the SE253 cam. i got all the CVO stuff from my cousin last year he built his to a 110". i have put 5,000 miles on it the last year and last weekend we put the redshift 587 cam in it and set my lifters started it and it sounded like the valves on the front cylinder were hitting each other. so i readjusted them and the horrible sound went away. i rode it Friday to Westworld for bike week and it sounded kinda noisy but not too bad. it made a little noise on the top end for a while. I always thought it was the rocker arms. anyway between Friday and yesterday I put 200 miles on it and last night it ran awesome but started getting really noisy so i parked it and today i tore it down. I'm looking for advise or suggestions as to what you all think i should do with it. i took some pics and i will post them to get your input. there's a guy in Tempe known as sbc he does these 103+ heads. i talked to him Friday and I'm bringing my heads to him tomorrow to get them ported and whatever else he says. he's like 15 minute from me. he said the turnaround time is about 10 days. I couldn't see anything wrong with the valves but I'm not a machinist. the motor only has like 5,000 miles on it since everything was new last year
Author
Topic: 2004 CVO 103+ head engine build thread (Read 2895 times)