Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[topfuelharley]

Hi, My name is Steve Huff, thank you in advance for your replies. I am one fitting away from having finishing my 07 (non-CVO) custom road king. Hot Rod Baggers ran the engine build story this month, Intelligent Design 107 inch drop on, and will feature the finished bike soon. I designed some new bars and had CCCS put their controls on them so now I have hyd clutch. I used CVO clutch cover since no aftermarket ones are yet available. My question is.... Does someone have a CVO manual they can look at to tell me if the fitting that goes into the cover uses an o-ring or is it a tapered bottom for an A/N fitting (-4)? The manual will have an exploded view. The an fitting fits but I cant see what the bottom looks like or what degree the taper is. Thank again, Steve

www.huffmotorsports.com

[Mikey]

On the 103 it has an o ring on a extended fitting and the hose size is #3. I can take a picture if needed but not until Monday.
Mike

[SCRM-R]

Here is a scanned image of the clutch control from the parts manual.  I can give you parts numbers if you let me know which parts.  Let me know if this is not what you are looking for and I'll try to scan another...

[Hoist!]

Goodridge made me a longer line for the '07 hydraulic setup and it works fine. Contact Shawn at Goddridge and he can make one in any size you need.

Hoist!