Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: Leaking inner primary seal (Baker)  (Read 1013 times)

0 Members and 1 Guest are viewing this topic.

trippy

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 212
  • 2007 CVO Road King 113cu Stage 4 Baker F6R
Leaking inner primary seal (Baker)
« on: August 16, 2019, 07:49:03 AM »

Hi Guys,

Fitted a Baker (high torque) inner primary bearing and seal a couple of years ago, all was fine, last year fitted a Baker F6R Reverse kit, at the same time put in a new inner primary seal, but it leaked, at the end of the year while doing a few other upgrades I decided to take off the primary again and replace (Very carefully) the seal again, after checking the shaft for any signs of damage and found none, but alas it is still leaking, if fact worse than before.

Has anyone had anything similar and if so, how did you cure it?

Thanks.   Ride safe.
Logged
WHUFC   COYI

Rooster

  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 5180
  • FLhtcuse2.ORG
Re: Leaking inner primary seal (Baker)
« Reply #1 on: August 16, 2019, 10:13:18 AM »

I have had a baker primary bearing in mine since 08 no issues. The HD one failed This is the first problem I have heard.
Logged

hd-dude

  • Global Moderator
  • 5k CVO Member
  • *****
  • Offline Offline
  • Posts: 6646
  • 2005 Cherry FLHTCSE2 "Obsession"

    • CVO1: 05 FLHTCSE2
    • Metal Dragon
Re: Leaking inner primary seal (Baker)
« Reply #2 on: August 16, 2019, 12:36:53 PM »

Seal in backwards?

trippy

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 212
  • 2007 CVO Road King 113cu Stage 4 Baker F6R
Re: Leaking inner primary seal (Baker)
« Reply #3 on: August 18, 2019, 05:46:02 PM »

Can anyone remember the dimensions of the seal?

Logged
WHUFC   COYI

Twolanerider

  • 25K CVO Member
  • *****
  • Offline Offline
  • Posts: 50536
  • EBCM #1.5 Emeritus DSP # ? Critter Gawker #?
    • MO


    • CVO1: 2000 Triple Red Screamin' Eagle Road Glide
    • CVO2: 2002 Candy Brandywine Screamin' Eagle Road King
    • CVO3: 1999 Arresting Red FXR2
Re: Leaking inner primary seal (Baker)
« Reply #4 on: August 18, 2019, 07:10:48 PM »

25 X 52 X 7 is my recollection.
Logged

trippy

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 212
  • 2007 CVO Road King 113cu Stage 4 Baker F6R
Re: Leaking inner primary seal (Baker)
« Reply #5 on: August 19, 2019, 05:07:51 AM »

Many thanks.
Logged
WHUFC   COYI

porthole

  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 10767
  • Welcome to the Machine

    • CVO1: 2005.3217-45 FLHTCSE2
    • Porthole II
Re: Leaking inner primary seal (Baker)
« Reply #6 on: August 20, 2019, 08:45:53 AM »

I have had a baker primary bearing in mine since 08 no issues. The HD one failed This is the first problem I have heard.

About the same with mine without searching for the exact date.
Logged
:fireman: Duane  :fireman:


MV 2013

1982 LowRider * 1974 XLCH * 1972 Adnoh
You can't control the weather, only how you deal with it
 

Page created in 0.173 seconds with 24 queries.