www.CVOHARLEY.com
Custom Vehicle Discussions => CVO™ Road Glide Custom® => Topic started by: NETacoma03Fatboy on March 14, 2012, 12:43:06 AM
-
My Buddies could not get this on my 2010 RG. Any suggestions? Does the rubber trim stay on or does it come off? Thanks.
http://www.harley-davidson.com/gma/gma_product.jsp?WebLogicSession=KyRyhTOmIh50bw04TVcKKaN6NvQm52vo3UOb5QM1y3LR2UChhr34!3583657!hiwpbmsp04.ihd.hd!7005!8005&PRODUCT%3C%3Eprd_id=845524448769913&FOLDER%3C%3Efolder_id=2534374302287493&ASSORTMENT%3C%3East_id=2534374302287493&bmUID=1253200372418&bmLocale=en_US
-
do you have the stock w/shield???
-
No. 12" Klock Werks.
-
thats the problem I think...I have a Clearview and just got the trim piece for it but it wont fit it appears the angle of the shield is different I just put it with the rest of the crap I bought and will probably never use.. it does fit with the small black 6" harley shield I have for summer so will use it on that..
-
well that is a bugger. Thanks for the advice.
-
I have the same problem. I just took delivery of a new Maple metallic with the stock new Windsplitter Windshield. In the new supplement to the P&A catalogue it says under the picture "shown with a windsplitter windshield". My guys at the dealership tried for over an hour to make it fit but no luck.Has anyone out there put the black gloss trim on their New CVO RG with the stock windsplitter not the standard RG windshield or any other king of windshield.
-
Put it on my RGC with the CW 12" and no problems. It requires some work th get it right, the offset holes need to be adjusted right and this process took me (not a wrench) a couple of hours to get it all laying flat. No the stock rubber goes away. Use just the rubber it the kit!
-
I did it with the Harley wind splitter. It was a pita. I used no rubber except what is on the trim, I enlarged the slots in the shield and basically clamped the shield tight using the trim. Have to admit it's a bit ugly under the trim but nobody will ever see it so no prob. Just cover everything including the floor, I must have dropped the trim a dozen times trying to make it fit.
-
and this was the HD trim and not the Kuryakyn. correct?
wish you guys were here.......
-
According to Long Ride Shields the hole spacing is different on the CVO bikes compared to the non CVO not sure if thats right but when I spoke to them last week they gave up a sale because of this I had already ordered and mentioned CVO Harley when he asked if it was a CVO .. they were going to have to set up equipment to make it special with the different hole spacing I was going to replace Clearview shield as the angle of the shield was leaving a 1/4" gap all the way across at the bottom of the shield ..I even went out and tried again Friday to make sure I wasnt doing something wrong..
-
Hey Kiwihog, have a Clearview on my FLTRUSE, used the stock windshield gasket (carefully peel from stock shield) and have a windshield that fits tight and snug, no space, no gaps.
-
Hey Kiwihog, have a Clearview on my FLTRUSE, used the stock windshield gasket (carefully peel from stock shield) and have a windshield that fits tight and snug, no space, no gaps.
Yep I got the windshield on with the OE rubber but cant get the windshield chrome trim cover on seems because of the angle I wanted to cover the holes because the black decal on the inside of the shield has rippled at the screw holes and looks ugly shield was installed last year by Clearview at AZ bikeweek works great and Clearview sent me a replacement sticker but decided to wait till I cant stand the look any longer
-
Yes, Harley wind splitter and black Harley trim.
-
thanks King roadglide,i'm going to pick one up this week and try it. You say you have to enlarge the holes in the windsplitter shield? can you post a picture of the finished product. thx
-
I'll try tomorrow, because I'm working with a first gen IPAD it might not be easy. Anyway once it was done it looks perfect but my trade was as a tool and die maker and that makes re-designing stuff easy.
-
ok, here you go.
-
another...
-
Looks great! :2vrolijk_21:
-
Nice! When the dealers meeting catalog came out it was the first time I saw it! I replaced my chrome for the new black trim that I had been looking for, as soon as I saw it I ordered it!! It entirely changed the look...
-
And this, poor quality photos, my phone...
-
Thyx for the pix . I plan on giving it a try on my maple woody.