Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[seharleyrider]

Has anyone figured out if you can put the 2010 RG mounts on the 2009 and earlier models?  I kind of like the look of the 2010's

[UFO_HOG]

My bet is they would fit just fine, they haven't changed the angle or position of the fairing. I think they did that to allow a better selection of lowers.

[LarryB]

they look exactly like the 09 SERG mounts, so yes, they should fit

[2018_FLTRXSE]

My bet is they would fit just fine, they haven't changed the angle or position of the fairing. I think they did that to allow a better selection of lowers.

It was my understanding the fairing is moved up .800 inch and titled another 2 degrees.

[NVWLDTHG]

The 2010 RG has different mounts.  I haven't eyeballed the main front mount.  But to me the angle of attack appears different.  But the back mounts on the engine guard are different.  They've angled them in to the center apparently allowing for the new wider vented lowers. 

[Bandit4142]

I was considering changing the mount on mine as well, but I wondered how that would 'sku' the alignment of the stripes from the fairing to the tank.....     They aren't all that close to begin with but...

[seharleyrider]

I know the mounting angle is different. I had not considered the stripe placement, thanks for the heads up on that.

[RGLIDE]

yea it might fluff the feathers on the orange and yellow SERG. But ain't nothin going to hurt the looks and quickness of the Silver SERG

[BigLew55]

The fairing is .800" higher and tilted 2* forward from '09.

[NVWLDTHG]

Hopefully, this picture will show the differences.  '09 Standard RG on left.  '10 RG Custom on right.  One other thing that appears is that the bottom of the headlight bezel is extended out from the fairing.

[hdbrad03]

I have been looking at this issue. The bracket that attaches to the frame and the front end has changed. I beleive it tilts and raises the front end. Also you will need the left and right chrome bracket and the are also taller than the stock. So i beleive you will need these 3 parts. Then this will allow us to mount the new style vented lowers. Also you can purchase an old set of vented but will need to shorten the cap extension that cover the engine guard. I plan on this being one of my winter projects.


 
      Brad

[NVWLDTHG]

Looking at the new 2010 line up on H-D's web and they've identified a new paint for the 2010 RG Custom "NEW Limited Paint Set – Primo".  It's an option.  Appears to hide the fairing's flowing lines. 

Check out that front tire's direction of slots. 

[hdbrad03]

At least they selected the BEST Color.

 
      Brad

[LarryB]

Hopefully, this picture will show the differences.  '09 Standard RG on left.  '10 RG Custom on right.  One other thing that appears is that the bottom of the headlight bezel is extended out from the fairing.

I'm sorry but I see no difference at all, I went to a dealer here yesterday and looked hard at the 2, used my tape measure and still no difference, the thing with the bezel is just that, one has a lense cover and one does not. that was a new thing for the 09 SERG's

[HawgSounds]

I have received the 2010 brackets and the difference is the 2 support brackets as well as the front support bracket. I have install them on the the 2009 SERG to accommodated the vented lowers. The customer wanted my custom leg warmers with my speakers kit that I make for the the electric glide. Here are the part numbers with pictures.


58454-10 Mount, LH/Frng - LWR
58460-10 Mount, RH/Frng - LWR
58530-10 MTG BRACKET - Frng