www.CVOHARLEY.com

CVO Technical => General CVO discussion => Topic started by: ChopperPilot on October 24, 2013, 07:41:53 PM

Title: What did you do to or on your CVO today?
Post by: ChopperPilot on October 24, 2013, 07:41:53 PM
Like the title says, what did you do to or on your CVO today?
Title: Re: What did you do to or on your CVO today?
Post by: FLHTCUSE7 on October 24, 2013, 07:47:46 PM
Got the recall taken care off, rode in snow flurries
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on October 24, 2013, 08:07:45 PM
I ride two up from time to time, so I put on the sissy bar to see what it looks like.  I hope to try it out over the weekend.
I don't think the sissy bar looks bad, I just won't keep it on unless we are riding 2 up or need to carry luggage on the passenger pillion.
Title: Re: What did you do to or on your CVO today?
Post by: CVO2FIXUP on October 24, 2013, 08:43:15 PM
 Used Autosol all over the exposed chrome while the bike is still somewhat apart. Lots of calcified water spots in those hard to reach arias. Now all the nooks and crannies are glowing like brand new.
Title: Re: What did you do to or on your CVO today?
Post by: Lever on October 24, 2013, 08:45:19 PM
working on a couple of projects
 1st one is new exhaust system
 2nd for now I will keep this under my hat ....hint: convertible owners will like this option
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on October 24, 2013, 09:25:57 PM
working on a couple of projects
 1st one is new exhaust system
 2nd for now I will keep this under my hat ....hint: convertible owners will like this option

What exhaust are you thinking about?
Title: Re: What did you do to or on your CVO today?
Post by: cahdbiker on October 24, 2013, 09:35:25 PM
CVO2FIXUP, I don't know what Autosol is, but when I do clean my bike I use the Mr. Clean car wash kit. If you follow the directions you can wash your bike, pull it back in the garage and come back to a dry bike with no spots. CAHDBIKER


Used Autosol all over the exposed chrome while the bike is still somewhat apart. Lots of calcified water spots in those hard to reach arias. Now all the nooks and crannies are glowing like brand new.
Title: Re: What did you do to or on your CVO today?
Post by: Lever on October 24, 2013, 09:35:51 PM
dragula  new  softail  system ...sent pics  that Frank wanted of my current system that's on my bike
Title: Re: What did you do to or on your CVO today?
Post by: 2k on October 24, 2013, 10:17:19 PM
Cleaned most of the umpteen million bugs behind the headlight trim ring.
Title: Re: What did you do to or on your CVO today?
Post by: Pete7539 on October 24, 2013, 11:16:30 PM
Finished up the install of the oil pan heater and put a quick connect plug on it like the battery tender has.
Title: Re: What did you do to or on your CVO today?
Post by: howtodoit on October 25, 2013, 12:05:27 AM
Rode mine to work and back.
Title: Re: What did you do to or on your CVO today?
Post by: 89Speedy on October 25, 2013, 06:24:53 AM
Like the title says, what did you do to or on your CVO today?
added a new timing cover...
Title: Re: What did you do to or on your CVO today?
Post by: 89Speedy on October 25, 2013, 06:27:36 AM
Like the title says, what did you do to or on your CVO today?
Added LED's....
Title: Re: What did you do to or on your CVO today?
Post by: 2k on October 25, 2013, 07:18:34 AM
Finished up the install of the oil pan heater and put a quick connect plug on it like the battery tender has.

??????????? WHUT???????????
Title: Re: What did you do to or on your CVO today?
Post by: Tru-Blu on October 25, 2013, 07:26:04 AM
Started assembling custom auxiliary lighting
Title: Re: What did you do to or on your CVO today?
Post by: Rooster on October 25, 2013, 10:36:29 AM
added a new timing cover...
I need one of those to replace the Jim's one. Where can I get one please
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on October 25, 2013, 10:48:19 AM
Rode the darn thing....a brisk 35 this morning into work.....
Title: Re: What did you do to or on your CVO today?
Post by: AMEDD_SFC on October 25, 2013, 12:13:51 PM
Went to Bike Night. 

  :pineapple:   :-*   :jalapeno:


Title: Re: What did you do to or on your CVO today?
Post by: Pete7539 on October 25, 2013, 12:56:27 PM
??????????? WHUT???????????

I'll post a pic installed if you want, but this is it

http://autocoolingsolutions.com/proddetail.php?prod=Engine-Oil-Heater-Oil-Pan-Heater-100-Watt-120-Volt

keeps oil between 100 and 125 depending on how cold it is. I don't have temperature controlled storage for the bike. Been fighting condensation for a while. Boot dryer helped, but not enough. Was close to freezing outside this am and engine was warm to touch. So there will no way be a transition from cold fluid inside to outside temps rising and causing condensation on all the chrome. In the past that plus dust/dirt lead to corrosion and a lot of elbow grease several times a year to bring it back to mirror shine. I'm certain this is the answer now, plus can't help but be good for a cold day startup to ride. All thanks to my ex taking my heated garage  :(

Then I ordered this http://www.ebay.com/itm/380691292230?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649 , could've gone with a smaller gauge, but overall diameter between the heater and this wire on the outside is the same. Spliced and soldered, heat shrink, then neatly routed it next to battery tender plug.
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on October 25, 2013, 01:01:23 PM
Added new tag to the ride.
Title: Re: What did you do to or on your CVO today?
Post by: Billy on October 25, 2013, 05:34:40 PM
Had new Kuryakan  license plate run brake turn installed Great look very bright and can't tell they are on the bike,    Dropped off Wild one bars to be powder coated.
Title: Re: What did you do to or on your CVO today?
Post by: willyB on October 25, 2013, 06:14:11 PM
Watch some dust fall on it while sitting in the garage drinking a beer. :o
Title: Re: What did you do to or on your CVO today?
Post by: Tru-Blu on October 25, 2013, 06:30:43 PM
Wow, Haird - 35 degree ride!  That's impressive!  Crazy, but EXTREMELY impressive!

I would be "thru-blu" if I tried riding in that cold of weather (and I live in Michigan to boot).

Tru (50 degree-riding wimp)  :sunny:
Title: Re: What did you do to or on your CVO today?
Post by: Skipper on October 25, 2013, 06:46:25 PM
Made a decision today. I'm gonna keep my babe. F... the '14 !!!!
Title: Re: What did you do to or on your CVO today?
Post by: dayne66 on October 25, 2013, 06:50:46 PM
Made a decision today. I'm gonna keep my babe. F... the '14 !!!!
I concur!
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on October 25, 2013, 07:12:14 PM
beat the snot out of it and when I got home I found a 2014 street glide stuck in the air filter
Title: Re: What did you do to or on your CVO today?
Post by: WVHoop on October 25, 2013, 07:27:13 PM
Rode it to the store & back home, plugged it in to the battery tender.......Pretty cool here right now.
Title: Re: What did you do to or on your CVO today?
Post by: FLHTCUSE7 on October 25, 2013, 07:40:34 PM
 Just came back from a 45 minute ride. 34 degrees here at the moment.

Gerbing jacket, pants, and gloves. It was nice and toasty.

Heading out to Minneapolis in the am.
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on October 25, 2013, 09:43:36 PM
Took an hour ride this afternoon, pretty nice here, sunny and 53.
Title: Re: What did you do to or on your CVO today?
Post by: CVO Aqua-Glider on October 25, 2013, 10:00:01 PM
Aired up the tires. Going on a Fall Foliage ride Sunday of about 200 miles or so. :) 
Title: Re: What did you do to or on your CVO today?
Post by: FLHTCUSE7 on October 25, 2013, 11:02:48 PM
So Chopperpilot what do you fly?

I an a fixed wing pilot with 100+ rotarywing time (rated for both)
Title: Re: What did you do to or on your CVO today?
Post by: North Georgia Hawg on October 25, 2013, 11:32:35 PM
I THOUGHT about it... That's all I could do, since I'm 2200 miles away from it...  :'(

Ken
Title: Re: What did you do to or on your CVO today?
Post by: CumberlandJB on October 25, 2013, 11:51:31 PM
Changed oil in the engine and trans (Harley Syn 3) and primary (Mobil 1) - and as always put just a little more in than the book calls for.  Aired up the front tire to 38 and the back to 44.  Put almost a half a tube in the front fork bearings.  Ready for Galveston next weekend.
Title: Re: What did you do to or on your CVO today?
Post by: 89Speedy on October 26, 2013, 05:44:19 AM
I need one of those to replace the Jim's one. Where can I get one please
PM me for info
Title: Re: What did you do to or on your CVO today?
Post by: Digital on October 26, 2013, 01:44:13 PM
Picked it up from the dealer - clutch recall work completed.   Got quotes for apes to be installed.   Thinking 14" or 16" on my ride.
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on October 26, 2013, 03:24:50 PM
Aired up the tires, and went on a short 100 mile ride.
Title: Re: What did you do to or on your CVO today?
Post by: Billy on October 26, 2013, 05:10:31 PM
Installed Mustang seat Set color of gauges Short ride to test gauge color      Billy
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on October 26, 2013, 06:04:11 PM
So Chopperpilot what do you fly?

I an a fixed wing pilot with 100+ rotarywing time (rated for both)

Flew Huey, Huey Gun Ships, Ranger, originally trained on a Hughes 300.
Title: Re: What did you do to or on your CVO today?
Post by: FLHTCUSE7 on October 26, 2013, 07:43:39 PM
fun, I got 70 hours give or take in the 300.

I flew fixed wing for 24 years before I got into helis
Title: Re: What did you do to or on your CVO today?
Post by: Gettinold on October 26, 2013, 07:47:46 PM
Finished up the install of the oil pan heater and put a quick connect plug on it like the battery tender has.
:worthless:
Title: Re: What did you do to or on your CVO today?
Post by: Pete7539 on October 26, 2013, 07:52:26 PM
Got my tube of Autosol in the mail. Man that is the best polish I've ever used. Went over the wheels and pipes again. Blinding lol
Title: Re: What did you do to or on your CVO today?
Post by: Pete7539 on October 26, 2013, 08:17:17 PM
:worthless:
Title: Re: What did you do to or on your CVO today?
Post by: Pete7539 on October 26, 2013, 08:17:48 PM
.
Title: Re: What did you do to or on your CVO today?
Post by: Pete7539 on October 26, 2013, 08:19:02 PM
The ultra copper rtv is the same color as the heater pad...
Title: Re: What did you do to or on your CVO today?
Post by: Pete7539 on October 26, 2013, 08:19:27 PM
.
Title: Re: What did you do to or on your CVO today?
Post by: FLHTCUSE7 on October 26, 2013, 08:23:00 PM
Got my tube of Autosol in the mail. Man that is the best polish I've ever used. Went over the wheels and pipes again. Blinding lol

I was under the impression that autosol is a abresive and should not be used on " perfect " chrome. It's meant to restore dull and oxidized chrome.

I am not sure but suggest that you check the fine print
Title: Re: What did you do to or on your CVO today?
Post by: Gettinold on October 26, 2013, 08:36:16 PM
 Thx Pete! I sure hope I never need one of those! What kind of temps do you have before using it and after?
Title: Re: What did you do to or on your CVO today?
Post by: Pete7539 on October 26, 2013, 09:08:09 PM
Thx Pete! I sure hope I never need one of those! What kind of temps do you have before using it and after?

Haven't ran the bike in over a week. Had frost this morning outside and dipstick said 107. Before if I were to check at that outside temp I wouldn't get a reading off the LCD lol. So it's doing its job well. And at only 100 watts, it's not a big juice hog.
Title: Re: What did you do to or on your CVO today?
Post by: Pete7539 on October 26, 2013, 09:11:48 PM
I was under the impression that autosol is a abresive and should not be used on " perfect " chrome. It's meant to restore dull and oxidized chrome.

I am not sure but suggest that you check the fine print

I'll look into it. My pipes are stainless so they have a brushed look up close anyway. My wheels, 08 HD chrome, so they're great from afar and this really brought out some shine. Didn't do any engine casings. Used rimwax on them. Thanks for the info though. Was thinking about doing some of the engine tomorrow because it says it leaves a protective coating.
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on October 26, 2013, 11:32:43 PM
.

Let me know how the digital dip stick and temp gauge works.  I have been looking at those for a while.
Title: Re: What did you do to or on your CVO today?
Post by: SmokeyJoe on October 27, 2013, 05:40:25 AM
I installed some new grips by Arlen Ness.  Changed most of the motor bolts for polished stainless steel.   I had to take the tank off to do it, i was slightly intimedated. But it was really easy.  So while i was under there i ran my Power Vision tuner cable.  I also removed my header pipe in preperation for my Clarity cam cover.  So next weekend i will install the cam and derby cover and some Arlen Ness floor boards.
Title: Re: What did you do to or on your CVO today?
Post by: Pete7539 on October 27, 2013, 11:20:58 AM
Let me know how the digital dip stick and temp gauge works.  I have been looking at those for a while.

Was just showing what the block heater brought the engine temp up to from it being pretty, pretty, pretty cold outside(sorry was watching Curb all night). As for the dipstick, I've had it since late 07. Dealer gave it to me with the purchase of my bike. I've never had a problem with it. I just finally changed the battery in it last week after all this time. Now I'm sure there are plenty who will say they're junk and they break, but I either got lucky or they weren't. Who knows  :nixweiss:  I think it comes with a 1 year warranty, so if its bound to break I hope it would go before then... 
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on October 27, 2013, 05:41:58 PM
Went out for a ride today with some coworkers and after we had a filling lunch we all headed to our respective homes, I did make one extra stop along the way -- seems I was missing a very important seasonal accessory.

Title: Re: What did you do to or on your CVO today?
Post by: Glenncarp on October 27, 2013, 06:04:53 PM
Like the title says, what did you do to or on your CVO today?

Florida in August sucks when it is 86 and 90% humidity, however we ride all year long, so this beats out the heat in August and July. Rode from Tarpon Springs to Ocala yesterday, Went to a car show in a farm field. Over 300 muscle cars, antiques and plain old rats.I ate a zeppoli and drank apple cider and rode home in the sun at 78 degrees. 220 miles in total and a slight sun burned face. I certainly do not miss living in Northern NJ this time of year!
Title: Re: What did you do to or on your CVO today?
Post by: Buy early on October 27, 2013, 06:22:23 PM
Unfortunately, I put them up on their lifts and under their covers for the winter months :-\
Title: Re: What did you do to or on your CVO today?
Post by: FLHTCUSE7 on October 27, 2013, 06:24:23 PM
A little early  :nixweiss: no snow yet.

We hit almost 45 here today. Nice ride, did not even turn on the heated gear  :2vrolijk_21:


Unfortunately, I put them up on their lifts for the winter months :-\
Title: Re: What did you do to or on your CVO today?
Post by: DCFIREMANN on October 27, 2013, 07:43:35 PM
I actually rode Ole Punkin today!!!!! After all of these years I still LOVE THIS BIKE!!!!!

Be Safe

THE DAWG
Title: Re: What did you do to or on your CVO today?
Post by: Hx2 on October 27, 2013, 07:51:57 PM
Beautiful weather in NE Florida today so took the Ultra out for a nice ride down to St Augustine. Nice ride along the ocean coming home. Best riding of the year right now.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on October 27, 2013, 07:53:02 PM
Took her for a nice fall ride it was beautiful here :)


(http://i1244.photobucket.com/albums/gg579/jswerve1974/1391958_700123180000180_112844653_n_zps89fed822.jpg) (http://s1244.photobucket.com/user/jswerve1974/media/1391958_700123180000180_112844653_n_zps89fed822.jpg.html)
Title: Re: What did you do to or on your CVO today?
Post by: Gettinold on October 27, 2013, 07:58:46 PM
I actually rode Ole Punkin today!!!!! After all of these years I still LOVE THIS BIKE!!!!!

Be Safe

THE DAWG

Rode my  :pumpkin: today too Dawg! Still rolls down the road as good as it did when it was new! :2vrolijk_21:   :pumpkin:
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on October 27, 2013, 08:31:54 PM
Went on a great fall ride here today, stopped at a local biker stop on the way back home for a beer (one is the limit).  Educated everyone on the Harley that i ride.
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on October 27, 2013, 08:36:41 PM
I actually rode Ole Punkin today!!!!! After all of these years I still LOVE THIS BIKE!!!!!

Be Safe

THE DAWG
And why shouldn't you... still one of... if not the best CVO of all times. ;) :D

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: CVO2FIXUP on October 27, 2013, 10:07:56 PM
I installed some new grips by Arlen Ness.  Changed most of the motor bolts for polished stainless steel.   I had to take the tank off to do it, i was slightly intimedated. But it was really easy.  So while i was under there i ran my Power Vision tuner cable.  I also removed my header pipe in preperation for my Clarity cam cover.  So next weekend i will install the cam and derby cover and some Arlen Ness floor boards.

  Isn't using stainless steel bolts in aluminum a no no?  Don't they react with each other and seize? Just wondering.
Title: Re: What did you do to or on your CVO today?
Post by: CVO Aqua-Glider on October 27, 2013, 11:17:33 PM
Put a couple hundred miles on riding up and down The Mighty Mississippi. Pretty cold in the AM, but afternoon was beautiful.

(http://farm8.staticflickr.com/7405/10528469683_806e3f0ff4_b.jpg) (http://www.flickr.com/photos/62925555@N07/10528469683/)
IMG_1045 (http://www.flickr.com/photos/62925555@N07/10528469683/) by oneboltzfan (http://www.flickr.com/people/62925555@N07/), on Flickr
Title: Re: What did you do to or on your CVO today?
Post by: Pete7539 on October 27, 2013, 11:50:39 PM
  Isn't using stainless steel bolts in aluminum a no no?  Don't they react with each other and seize? Just wondering.

Yea use of tef-gel will help prevent that from happening. Most marine supply shops should have it.
Title: Re: What did you do to or on your CVO today?
Post by: 110tHunDer on October 27, 2013, 11:54:25 PM
 
Time to start getting ready for winter here, too.  SERG was first in line with an oil change and a bath today.  SEUC is clean on the outside, but still needs fresh fluids on the inside.  Should have both of 'em in their hibernating spots by this time next Sunday. :'(

(http://img.photobucket.com/albums/v321/weissbc/394979cf63ac448cce608f35a960f287.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: gstrickland on October 28, 2013, 01:26:27 PM
Brought brand new D&D Fat Cat Borazilla exhaust, tuner, dyno time and a new chopped tour pack--- ass is still hurting...
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on October 28, 2013, 01:34:29 PM

Time to start getting ready for winter here, too.  SERG was first in line with an oil change and a bath today.  SEUC is clean on the outside, but still needs fresh fluids on the inside.  Should have both of 'em in their hibernating spots by this time next Sunday. :'(

(http://img.photobucket.com/albums/v321/weissbc/394979cf63ac448cce608f35a960f287.jpg)


That's sad....I really feel for all y'all in the North (yes, I really mean that...no joke) having to store your bikes for the Winter...brought a tear to my eye.. :(

.....Y'all really just need to move on down South...you'd be welcome with open arms, good weather and NO SNOW (at least now much snow...whatever we get don't last long).... :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: SBB on October 28, 2013, 01:40:02 PM

Time to start getting ready for winter here, too.  SERG was first in line with an oil change and a bath today.  SEUC is clean on the outside, but still needs fresh fluids on the inside.  Should have both of 'em in their hibernating spots by this time next Sunday. :'(

(http://img.photobucket.com/albums/v321/weissbc/394979cf63ac448cce608f35a960f287.jpg)


What da hell?
Did Judy steal your tour pack and saddlebags?
She wants blue but must be practicing on orange.

 :nixweiss:

SBB


Title: Re: What did you do to or on your CVO today?
Post by: 110tHunDer on October 28, 2013, 01:46:32 PM
 
Nah, just a case of ...... what can shine, will shine! ;) :2vrolijk_21: :sunny:
Title: Re: What did you do to or on your CVO today?
Post by: SBB on October 28, 2013, 01:48:47 PM

Nah, just a case of ...... what can shine, will shine! ;) :2vrolijk_21: :sunny:




 :2vrolijk_21: :2vrolijk_21: :2vrolijk_21: :2vrolijk_21: :2vrolijk_21: :2vrolijk_21: :2vrolijk_21: :2vrolijk_21:
There you go, I've heard that before.
Looks great.

 :)

SBB



Title: Re: What did you do to or on your CVO today?
Post by: phato1 on October 28, 2013, 08:43:58 PM
I installed this:
Title: Re: What did you do to or on your CVO today?
Post by: FLHTCUSE7 on October 28, 2013, 08:55:59 PM
To early to put the MC away already. Going for a two day ride tomorrow, they predict 1/2" snow in the am but I don't believe it will stick.

I will winterize the MC when the real snow is here. (Duluth, MN) but I hope for another month of riding.

 :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on October 28, 2013, 09:05:48 PM
To early to put the MC away already. Going for a two day ride tomorrow, they predict 1/2" snow in the am but I don't believe it will stick.

I will winterize the MC when the real snow is here. (Duluth, MN) but I hope for another month of riding.

 :2vrolijk_21:

Actually getting ready to put the bike away within the next few weeks - the tourpak goes to the painter the first week of December so I know I'll be done riding for the season before then. I use to ride year round up until about 6 years ago - that's when CT decided to start using a liquid de-icing solution on all the roads -- that sh*t will eat the aluminum even if it is powder coated, and it maintains it's caustic effects for days after it's sprayed.
Title: Re: What did you do to or on your CVO today?
Post by: Rooster on October 28, 2013, 09:11:05 PM
To early to put the MC away already. Going for a two day ride tomorrow, they predict 1/2" snow in the am but I don't believe it will stick.

I will winterize the MC when the real snow is here. (Duluth, MN) but I hope for another month of riding.

 :2vrolijk_21:
Atta boy great attitude. Enjoy your ride.
Title: Re: What did you do to or on your CVO today?
Post by: Para Bellum on October 28, 2013, 09:16:16 PM
Put on the George Anderson TP relocator.  BSR is happier already.
Title: Re: What did you do to or on your CVO today?
Post by: DUNK 2 on October 28, 2013, 09:51:52 PM
Packed her away for another Pennsylvania winter. :(
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on October 28, 2013, 10:00:24 PM
Packed her away for another Pennsylvania winter. :(

That makes for a long winter.
Title: Re: What did you do to or on your CVO today?
Post by: FLHTCUSE7 on October 28, 2013, 10:17:20 PM
Atta boy great attitude. Enjoy your ride.

I might feel different if I slide sideways on my ass tomorrow    8)
Title: Re: What did you do to or on your CVO today?
Post by: FLHTCUSE7 on October 28, 2013, 10:25:49 PM
I installed this:

That looks great. I am thinking about ordering one but wonder if it interferes with your right knee?  Looks like its a little thicker and it have a few points on it.

Any concerns or issues? (I assume not)
Title: Re: What did you do to or on your CVO today?
Post by: BALIS on October 29, 2013, 12:07:36 PM
I installed this:
Beautiful   :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: DUNK 2 on October 29, 2013, 12:42:48 PM
That makes for a long winter.

Yes it does.
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on October 29, 2013, 06:09:55 PM
That looks great. I am thinking about ordering one but wonder if it interferes with your right knee?  Looks like its a little thicker and it have a few points on it.

Any concerns or issues? (I assume not)

I was concerned that it would hit my leg but it does not contact my leg at all - you results may vary, I'm 5'9" with a 30" inseam and the billet cover sits nicely behind my leg just below the knee as I'm riding  so you can use that as a guide.
Even though it appears to be MUCH larger than the stock filter cover because of it's shape it actually is only about 1/4" larger around the O.D. because of the cool retention bolts  and maybe 3/16" thicker  :nixweiss:

Title: Re: What did you do to or on your CVO today?
Post by: krypto2011 on October 29, 2013, 06:29:36 PM
Whipped up a tour pack storage rack to mount on the garage wall. Too much Yankee ingenuity in my blood to buy something I can build from scrap in the shop!!
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on October 29, 2013, 06:35:04 PM
Nice job  :2vrolijk_21: and with the money you save you can buy more beer!
Title: Re: What did you do to or on your CVO today?
Post by: FLHTCUSE7 on October 29, 2013, 07:00:14 PM
I was concerned that it would hit my leg but it does not contact my leg at all - you results may vary, I'm 5'9" with a 30" inseam and the billet cover sits nicely behind my leg just below the knee as I'm riding  so you can use that as a guide.
Even though it appears to be MUCH larger than the stock filter cover because of it's shape it actually is only about 1/4" larger around the O.D. because of the cool retention bolts  and maybe 3/16" thicker  :nixweiss:



Nice, I am getting one  :)

Rode 110 miles in 32F and light snow today. MC looks like it been through a bucket of grey paint  :-[
Title: Re: What did you do to or on your CVO today?
Post by: dayne66 on October 29, 2013, 07:01:12 PM
Went on a hard and fast ride to Duncan...
Passed two speed traps ... Both on the other side of the divided hiway
Title: Re: What did you do to or on your CVO today?
Post by: 06fatdaddy on October 29, 2013, 09:46:20 PM
Finally got to sit on mine after the long wait. She finally came in.    ;D :apple: :carrot: :jalapeno: :cucumber:
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on October 29, 2013, 10:18:55 PM
Congrats, great looking ride!
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on October 30, 2013, 06:34:19 PM
Finally got to sit on mine after the long wait. She finally came in.    ;D :apple: :carrot: :jalapeno: :cucumber:

NICE!  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Tru-Blu on October 30, 2013, 07:29:44 PM
 :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: 2k on October 30, 2013, 09:19:06 PM
F'ed it Up

Spent about 4hrs: Washed, Glared, Polished Chome. WoW what a purity shiny motorsickle. Hey, 15 minutes of light left, 71deg, kick the tire-lite the fire!!! Time for a quick spin around the base of the little mountain. Hope this pic will show the extend of my horror  :sauer005: Every bug in Alexander County..........DEAD


Title: Re: What did you do to or on your CVO today?
Post by: FLHTCUSE7 on October 30, 2013, 09:34:52 PM
Rode 250 miles today. 40F when I started out and the last two hours was pouring rain and 37F, still a fun ride :2vrolijk_21:

Rode in the snow yesterday, 32F, and 2.5 hour  ;)
Title: Re: What did you do to or on your CVO today?
Post by: 2k on October 30, 2013, 10:07:52 PM
Rode 250 miles today. 40F when I started out and the last two hours was pouring rain and 37F, still a fun ride :2vrolijk_21:

Rode in the snow yesterday, 32F, and 2.5 hour  ;)

Holy White stuff Batman........give this guy the prize!!!!
Title: Re: What did you do to or on your CVO today?
Post by: Sprintkid on October 30, 2013, 10:11:11 PM
Did an iron butt. We rode 1046 mi in 17hrs 52 min. We left at 6 pm and rode thru the night returning back home at noon the next day. 31 degrees and a 25 mph wind gust made it pretty miserable but we made it. Glad I did it and made it home safe but not sure I will do another.
Title: Re: What did you do to or on your CVO today?
Post by: 110tHunDer on October 30, 2013, 11:20:27 PM
F'ed it Up

Spent about 4hrs: Washed, Glared, Polished Chome. WoW what a purity shiny motorsickle. Hey, 15 minutes of light left, 71deg, kick the tire-lite the fire!!! Time for a quick spin around the base of the little mountain. Hope this pic will show the extend of my horror  :sauer005: Every bug in Alexander County..........DEAD




 :huepfenlol2: :oops:  Damn.  I feel your pain!  Been there, done that!  At least the bugs come off easier with a fresh coat of Glare! :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Buy early on October 31, 2013, 12:00:02 AM
Did an iron butt. We rode 1046 mi in 17hrs 52 min. We left at 6 pm and rode thru the night returning back home at noon the next day. 31 degrees and a 25 mph wind gust made it pretty miserable but we made it. Glad I did it and made it home safe but not sure I will do another.

Congrats! That's an accomplishment!
Title: Re: What did you do to or on your CVO today?
Post by: Tru-Blu on October 31, 2013, 11:51:41 AM
Agreed - hope to do one someday myself.  Goal is when I finish school (approximately 2 years depending on how many classes I can cram into a term), that I'll hop on Saphira and take her all the way from Michigan to Florida in one shot.
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on October 31, 2013, 01:10:09 PM
Did an iron butt. We rode 1046 mi in 17hrs 52 min. We left at 6 pm and rode thru the night returning back home at noon the next day. 31 degrees and a 25 mph wind gust made it pretty miserable but we made it. Glad I did it and made it home safe but not sure I will do another.

Congrats and welcome to the Iron Butt brotherhood.... :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Digital on November 01, 2013, 04:59:15 PM
Ordered 16" Bent Ape Beaters from BRs Custom bars in 1 1/2" gloss black for the 2014 SERK
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on November 01, 2013, 05:14:25 PM
Fired her up and took a 2.5 hr ride on the Great River Road, now trying to figure out which LED Run/Break/Turn to put on the fender. 
Title: Re: What did you do to or on your CVO today?
Post by: red70 on November 01, 2013, 08:09:57 PM
 :orange: Installed new intake gaskets and added a CV Tuner kit to my carb. Runs better now than it ever has. Cured the low speed stumble and virtyally eliminated the back fire.
Title: Re: What did you do to or on your CVO today?
Post by: Bigfoot16 on November 01, 2013, 08:31:56 PM
Fired it up and started chasing the sun til it set.  Got about a 2 hour ride in, taking as many tree lined roads as possible.  The leaves are really popping with color right now.  Too bad they don't last long, makes for a nice ride....
Title: Re: What did you do to or on your CVO today?
Post by: CVOSE on November 02, 2013, 07:14:17 PM
Changed both tires. They were completely gone after 14000 mls.
Title: Re: What did you do to or on your CVO today?
Post by: CVO2FIXUP on November 03, 2013, 12:02:58 AM
 Started my 2010 after a complete engine re build.  Started immediately and sounds very quit. Took a video but it is in MVI needs to be in AVI. have no idea how to convert. Any suggestions with a good free converter? 
Title: Re: What did you do to or on your CVO today?
Post by: Tru-Blu on November 04, 2013, 12:32:57 PM
I didn't do this today, but did it this past Saturday -  :-[

First mod on Saphira.  HUGE THANK YOU to Hx2 for helping me out with some wiring tips!  I'll probably post a few more pics in the SERK board for it.
- Added Truck Lite Phase 7 headlight and passing lamps
- Added HD custom auxiliary bracket kit
- Added HD bullet turn signals
- Replaced signal bulbs with CD Dynamic Ringz'
- Added Kuryakyn deep dish bezels
- Added Kuryakyn LED trim rings
- Added CD Signal Stablizer for LED signals - I did need it after running the bike for a few days with the Dynamic Ringz in as a test before the full install.  My signals never "learned" to flash correctly without it.

I know most won't like that I decided to keep the signals on the handlebars, but it does give me more light.  I was on the fence about it, but the boss came in the garage and said "I like it - I feel more comfortable that you will be seen better out there."  That was enough for me to keep 'em on.

Title: Re: What did you do to or on your CVO today?
Post by: CVO Aqua-Glider on November 04, 2013, 01:39:56 PM
I didn't do this today, but did it this past Saturday -  :-[

First mod on Saphira.  HUGE THANK YOU to Hx2 for helping me out with some wiring tips!  I'll probably post a few more pics in the SERK board for it.
- Added Truck Lite Phase 7 headlight and passing lamps
- Added HD custom auxiliary bracket kit
- Added HD bullet turn signals
- Replaced signal bulbs with CD Dynamic Ringz'
- Added Kuryakyn deep dish bezels
- Added Kuryakyn LED trim rings

I know most won't like that I decided to keep the signals on the handlebars, but it does give me more light.  I was on the fence about it, but the boss came in the garage and said "I like it - I feel more comfortable that you will be seen better out there."  That was enough for me to keep 'em on.



Looks great.  Good job, and thanks for sharing deatails and picture. :)
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on November 04, 2013, 02:00:08 PM
I didn't do this today, but did it this past Saturday -  :-[

First mod on Saphira.  HUGE THANK YOU to Hx2 for helping me out with some wiring tips!  I'll probably post a few more pics in the SERK board for it.
- Added Truck Lite Phase 7 headlight and passing lamps
- Added HD custom auxiliary bracket kit
- Added HD bullet turn signals
- Replaced signal bulbs with CD Dynamic Ringz'
- Added Kuryakyn deep dish bezels
- Added Kuryakyn LED trim rings

I know most won't like that I decided to keep the signals on the handlebars, but it does give me more light.  I was on the fence about it, but the boss came in the garage and said "I like it - I feel more comfortable that you will be seen better out there."  That was enough for me to keep 'em on.



Looks awesome, no excuse for not seeing you on the road.
Title: Re: What did you do to or on your CVO today?
Post by: Hx2 on November 04, 2013, 05:13:08 PM
I didn't do this today, but did it this past Saturday -  :-[

First mod on Saphira.  HUGE THANK YOU to Hx2 for helping me out with some wiring tips!  I'll probably post a few more pics in the SERK board for it.
- Added Truck Lite Phase 7 headlight and passing lamps
- Added HD custom auxiliary bracket kit
- Added HD bullet turn signals
- Replaced signal bulbs with CD Dynamic Ringz'
- Added Kuryakyn deep dish bezels
- Added Kuryakyn LED trim rings

I know most won't like that I decided to keep the signals on the handlebars, but it does give me more light.  I was on the fence about it, but the boss came in the garage and said "I like it - I feel more comfortable that you will be seen better out there."  That was enough for me to keep 'em on.

Looks great!  Glad I could be of assistance.
Title: Re: What did you do to or on your CVO today?
Post by: Digital on November 04, 2013, 06:30:12 PM
I would love to know how well this setup throws the light up the road while leaning in a turn compared to the stock setup.   Looks good.   I'll bet it all uses as much electricity as the standard single bulb used so your electrical system isn't screaming.    :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: FLHTCUSE7 on November 04, 2013, 08:17:17 PM
Reprogramed my passing lights to be on with high beam as well
Title: Re: What did you do to or on your CVO today?
Post by: shovelhead FXEF on November 04, 2013, 09:43:02 PM
Reprogramed my passing lights to be on with high beam as well

Looked into doing that, what is involved? Thanks
Title: Re: What did you do to or on your CVO today?
Post by: DCFIREMANN on November 04, 2013, 09:54:08 PM
I walked into my shop tonight and I just looked at mine for a while then had a talk with Ole Punkin. I did tell her she was by far the best Harley I have ever owned!!!!

I love my Girl!!!!!

Be Safe

THE DAWG
Title: Re: What did you do to or on your CVO today?
Post by: SE-5 on November 04, 2013, 10:50:06 PM
Sadly, not a damn thing.
Title: Re: What did you do to or on your CVO today?
Post by: CVO Aqua-Glider on November 05, 2013, 12:10:35 AM
Rode to work and back.  Freakin' loving the heated seat. :)
Title: Re: What did you do to or on your CVO today?
Post by: Tru-Blu on November 05, 2013, 12:13:19 AM
Digital, I haven't actually done the math, but I think with all the lights being LED's it's actually using far less juice than if the signals and headlight/passing lamps had regular bulbs.  I haven't taken it on the road at night since doing the mod, but it's pretty blinding sitting in front of it to take the pic.   8)

EDIT - Went back and reread your post, Digital.  I think you were saying the same thing, but did so far more efficiently than I did.  I shouldn't post when my mind has turned to mush for the day.
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on November 05, 2013, 08:40:18 AM
Well, not today but yesterday....20K mile service and a tune with the SE Race tuner.  Not bad results for very little output money wise.  Only mods is the removal of the SE muffler plug and changing the stock header.  I'll take it and it runs so much better.... :2vrolijk_21:

First picture is the base run (with catless header pipe and deplugged SE muffler, no tune).
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on November 05, 2013, 08:42:21 AM
...and the after with tune.  I'm happy with the cost and the results....now on to my next 20,000 miles... ;D
Title: Re: What did you do to or on your CVO today?
Post by: Pete7539 on November 05, 2013, 02:57:40 PM
Checked oil temp this morning. 113 degrees, not bad for a two dog night.
Title: Re: What did you do to or on your CVO today?
Post by: Tru-Blu on November 05, 2013, 07:18:16 PM
Grats on the performance increase, Howard!   :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: johnbv on November 06, 2013, 01:57:54 AM
Well, yesterday, I got out the CVO and rode to vote ! Both are great American privilege's !!! Nice 57 degree, dry fall afternoon in Ohio, the heated grips and heated seat are wonderful !!! I didn't want to come home, especially since it was only 6:20 when it got dark !!!! 
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on November 06, 2013, 07:45:01 AM
Grats on the performance increase, Howard!   :2vrolijk_21:

Thanks Todd.  For about $750 OTD (that includes the $150 for the de-catted header pipe), I got a good increase with much better spread across the RPM range.  Plus, checking the fuel mileage so far, no big changes.  Of course, I'm playing with it a bit more since the tune so my fuel mileage is suffering a bit but what the heck....

I meant to post about your lighting changes....VERY NICE!  I like the LED look and am very happy with my Phase 7/Truck light so I know you will love yours along with the halo's.  More light = better visibility to see and be seen.  Tickled for ya, brother.

Howard
Title: Re: What did you do to or on your CVO today?
Post by: FLHTCUSE7 on November 06, 2013, 08:18:56 AM
Rode to work this am. Started out at 31F but turned in to a balmy 34F when I got to work.

No snow yet  :mango:
Title: Re: What did you do to or on your CVO today?
Post by: Tru-Blu on November 06, 2013, 12:03:19 PM
BRRRRRRR!
Title: Re: What did you do to or on your CVO today?
Post by: shelby500 on November 06, 2013, 12:49:20 PM
Just ordered more parts for a bike I don't have yet!
Title: Re: What did you do to or on your CVO today?
Post by: Pete7539 on November 06, 2013, 03:11:41 PM
Rode to work this am. Started out at 31F but turned in to a balmy 34F when I got to work.

No snow yet  :mango:

I hope it's a short commute! I'd look like the little brother in Christmas Story dressed for that weather :nervous:
Title: Re: What did you do to or on your CVO today?
Post by: FLHTCUSE7 on November 06, 2013, 03:34:12 PM
Only 20 miles. Trying to get riding in before 4-5 months of snow.
Title: Re: What did you do to or on your CVO today?
Post by: spada84 on November 06, 2013, 03:59:23 PM
In the last week (and a day).

Picked up my CVO after complete engine rebuild by Barrie HD in Barrie, Ontario
Rode the bike home to VA
Went on lunch ride with HOG Chapter (about 125 miles)
Dropped off and picked up bike from Steel Horse HD for "80K" service - about 1K on rebuild
Got approval for new Heated Seat from ESP
Ordered pair of Metezler 888 tires from Bike Bandit
Rode to work.

Life is Good and I have been Blessed.
Title: Re: What did you do to or on your CVO today?
Post by: Pete7539 on November 06, 2013, 04:37:42 PM
Only 20 miles. Trying to get riding in before 4-5 months of snow.

Understandable, stay warm!
Title: Re: What did you do to or on your CVO today?
Post by: the jacobite on November 06, 2013, 05:35:47 PM
Parked her up for the winter heavy frost the last couple of morning, so that's the salt on the roads again
Title: Re: What did you do to or on your CVO today?
Post by: FLHTCUSE7 on November 06, 2013, 07:06:40 PM
Salt on the road - bike parked for the winter, agree 100%
Title: Re: What did you do to or on your CVO today?
Post by: Billy on November 06, 2013, 07:12:11 PM
Ordered Custom Dynamic  Ringz for front turn signals Billy
Title: Re: What did you do to or on your CVO today?
Post by: Tru-Blu on November 06, 2013, 10:25:05 PM
 :2vrolijk_21:  Good call, Billy - you'll love 'em!
Title: Re: What did you do to or on your CVO today?
Post by: SERK3 on November 07, 2013, 07:50:39 AM
Saturday 10 of use rode about 200 miles which included The Devil's Triangle, Firsr time in about 4 yrs. that i have been able to ride with our little group because i was working on saturday's. A little chilly Sat. a.m. but warmed up to be a good day for riding.  :2vrolijk_21:

We had two newbie's ride with us on Yamaha's I just had to show them how the SERK handled on the Triangle, One of the other guys called me Monday night to tell me that one of them went to Colbach H-D Monday looking at a new Harley.  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on November 09, 2013, 07:15:37 PM
UPS delivered these to me yesterday.
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on November 09, 2013, 07:21:33 PM
Added the Swingarm Inserts before heading out on a long ride today.
An inexpensive addition for a big change to the Swingarm.
Title: Re: What did you do to or on your CVO today?
Post by: AMEDD_SFC on November 09, 2013, 09:23:00 PM
Nice.  Add a lot to the bike.

had them on my 95 FB

Some pics for fun.  Sold it to my bro' who still has it.

M
Title: Re: What did you do to or on your CVO today?
Post by: AMEDD_SFC on November 09, 2013, 09:23:59 PM
'Nuther pic

M
Title: Re: What did you do to or on your CVO today?
Post by: SpeedisLife on November 09, 2013, 09:51:02 PM
Installed my new Ohlins. 
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on November 09, 2013, 10:01:39 PM
Installed my new Ohlins. 

Cool, give us a ride report when you can.
Title: Re: What did you do to or on your CVO today?
Post by: FLHTCUSE7 on November 09, 2013, 10:44:24 PM
Installed my new Ohlins. 

Good call, I did the same. (But went with yellow springs - nostalgic)
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on November 10, 2013, 12:35:31 AM
Ordered Custom Dynamic  Ringz for front turn signals Billy
Ditto
Title: Re: What did you do to or on your CVO today?
Post by: Tru-Blu on November 10, 2013, 01:00:41 AM
Tucked my baby away for her long winter's nap.  As I was wiping some dust away before riding, I was trying to hurry and the edge of the microfiber towel actually put a slight scratch in the back side of the right hard bag.  Man, I can't believe this paint is that soft.  I already had some paint correction work to do before this, now I just have a longer list once she wakes up from her nap.   :sleeping:
Title: Re: What did you do to or on your CVO today?
Post by: the jacobite on November 10, 2013, 08:59:14 AM
Picked up my tour pac relocation kit, it was for sale on E Bay all new and boxed including the wiring kit from a HD dealer, starting bid £100 got it £104 a bargain the full price over here is over £600.
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on November 10, 2013, 09:28:24 AM
Tucked my baby away for her long winter's nap.  As I was wiping some dust away before riding, I was trying to hurry and the edge of the microfiber towel actually put a slight scratch in the back side of the right hard bag.  Man, I can't believe this paint is that soft.  I already had some paint correction work to do before this, now I just have a longer list once she wakes up from her nap.   :sleeping:
I would try some Scratch & Swirl Repair (http://www.harley-davidson.com/store/scratch---swirl-repair) (or similar type product) first... I can't imagine a microfiber cloth would put a scratch so deep that could/would require paint correction. :nixweiss:

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: 110tHunDer on November 10, 2013, 09:37:40 AM
 
"Paint correction" is a detailing industry term that refers to the application of products to remove paint swirls and light scratches.

I think you're saying the same thing. :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on November 10, 2013, 09:39:15 AM

"Paint correction" is a detailing industry term that refers to the application of products to remove paint swirls and light scratches.

I think you're saying the same thing. :2vrolijk_21:

Ok, gotcha.

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: Tru-Blu on November 10, 2013, 10:52:03 AM
Affirmative, Thunder - albeit I'm a little leery of taking the Porter Cable to the hard bags with some of the angles that need to be dealt with.
Title: Re: What did you do to or on your CVO today?
Post by: 110tHunDer on November 10, 2013, 11:11:34 AM
 
This is what I use for the bikes: http://www.griotsgarage.com/product/professional+3+inch+random+orbital.do

Still can't get everywhere in, and around, the tank and fairing on either of my 2 bikes, but your SERK should be a little easier that way.  Bags are pretty do-able.  I get what I can with them on the bike, then take them off and lay 'em on a pile of sheets to do the backs.  Not much left to do by hand after getting the larger areas with the 3".
Title: Re: What did you do to or on your CVO today?
Post by: cambo on November 10, 2013, 06:00:01 PM
Added an Arlen-Ness fairing to the Breakout with HD quick release clamps. Makes a big difference when riding the bike. Up next getting it painted to match the rest of the bike with the diamond black/chrome/slate/red pinstripe.

Title: Re: What did you do to or on your CVO today?
Post by: cambo on November 10, 2013, 06:00:57 PM
Another angle:
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on November 10, 2013, 07:34:03 PM
Looking good, will look really sharp with the paint matching the bike.
Title: Re: What did you do to or on your CVO today?
Post by: Digital on November 10, 2013, 08:29:13 PM
De-catted the stock head pipes from my 2013 Road Glide (103) to put on my 2014 SERG with a TTS sometime this winter.   Its the same head pipe on both bikes from the factory right?
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on November 10, 2013, 10:22:32 PM
I didn't do this today, but did it this past Saturday -  :-[

First mod on Saphira.  HUGE THANK YOU to Hx2 for helping me out with some wiring tips!  I'll probably post a few more pics in the SERK board for it.
- Added Truck Lite Phase 7 headlight and passing lamps
- Added HD custom auxiliary bracket kit
- Added HD bullet turn signals
- Replaced signal bulbs with CD Dynamic Ringz'
- Added Kuryakyn deep dish bezels
- Added Kuryakyn LED trim rings
- Added CD Signal Stablizer for LED signals - I did need it after running the bike for a few days with the Dynamic Ringz in as a test before the full install.  My signals never "learned" to flash correctly without it.

I know most won't like that I decided to keep the signals on the handlebars, but it does give me more light.  I was on the fence about it, but the boss came in the garage and said "I like it - I feel more comfortable that you will be seen better out there."  That was enough for me to keep 'em on.




Looks good. I just put the Phase 7 lights on the front-end this week too. Friends I rode behind said they were certainly brighter and made me more visible; which is a good thing.  :bananarock:
Title: Re: What did you do to or on your CVO today?
Post by: Billy on November 11, 2013, 05:55:12 PM
Installed CD Ringz  They are great. Can't wait till the snow melts to try them out at night. Such a cheap simple improvement      Installing Wild one 502  Bars Wed. and Tour Pack  Billy
Title: Re: What did you do to or on your CVO today?
Post by: tysndys on November 11, 2013, 06:48:57 PM
Took off the heal shifter. Gives more room to move my foot around
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on November 11, 2013, 08:25:06 PM
Took off the heal shifter. Gives more room to move my foot around

HEY! clean that thing will ya?  ;D
Title: Re: What did you do to or on your CVO today?
Post by: T-Roy on November 11, 2013, 09:23:55 PM
Removed the right side cover and sent it along with a tour pak mounting rack to Joe at Xtreme Dimension so he can paint my swinebox tour pak. I sure am looking forward to getting it back. I also had some LED lights installed at the Lonestar rally last week.
Title: Re: What did you do to or on your CVO today?
Post by: Tru-Blu on November 11, 2013, 10:25:20 PM
 :2vrolijk_21: :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Billy on November 13, 2013, 09:47:23 PM
Installed tour pack, new bars, Plugs for Gerbing on engine heat defector, lighter in tour pack ,LED strip light on tour pack, Turn indicators on handle bar cover ,clear armor over saddle bags and a saddle bag guard. Now I'm broke but very happy     I will get pictures this week and try to find out how to post.  Also had light trim ring powder coated black    Billy
Title: Re: What did you do to or on your CVO today?
Post by: garretn on November 13, 2013, 11:51:28 PM
Purchased my 2014 Limited CVO today  :huepfenjump3:. Only got to ride it about 7 miles to the house since it's my wifes birthday I figured I better spend some time with her before I leave to go out of town tomorrow.
Title: Re: What did you do to or on your CVO today?
Post by: Billy on November 14, 2013, 05:55:15 AM
7 miles, I would have taken the long way home      Billy
Title: Re: What did you do to or on your CVO today?
Post by: D-N-D on November 14, 2013, 06:15:58 AM
I like that buy yourself a New Bike on the Wife Birthday !!!! I might try that next time  ;D
Title: Re: What did you do to or on your CVO today?
Post by: 2k on November 14, 2013, 12:09:55 PM
I knew they made the SE Deuce for a reason, just figured out what it was. Heavy Breather dressup on my CUSE4.
Sorry for the crappy pic
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on November 14, 2013, 12:12:25 PM
I like that buy yourself a New Bike on the Wife Birthday !!!! I might try that next time  ;D
I bought myself a new bike for my wife and I's anniversary  :bananarock:
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on November 14, 2013, 12:18:53 PM
Awesome, congrats on the new bike and anniversary.  What did the wife get for the anniversary?
What bike did you buy?

Title: Re: What did you do to or on your CVO today?
Post by: Rooster on November 14, 2013, 12:27:32 PM
Is that like Homer Simpson bought his wife a bowling ball for her birthday that had his name engraved on it. :huepfenlol2:
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on November 14, 2013, 12:40:52 PM
Awesome, congrats on the new bike and anniversary.  What did the wife get for the anniversary?
What bike did you buy?


It was in 2009 and I bought a new 2009 Vivid black FLHX. She got a new 2009 Vivid black FLHX (same bike) lol. We were both happy as could be and it worked out great. We were riding a 1997 Softtail custom so it was quite an upgrade. As you can see in my profile we have upgraded again to a 12 CVO SG  :bananarock:
Title: Re: What did you do to or on your CVO today?
Post by: firefighter156 on November 14, 2013, 08:51:53 PM
Reluctantly put it away for the winter   :(
Title: Re: What did you do to or on your CVO today?
Post by: Me757 on November 14, 2013, 10:02:14 PM
Bought some true custom bags and fenders getting painted to match my 2005 cvo
Title: Re: What did you do to or on your CVO today?
Post by: westtexasroadglide on November 14, 2013, 10:21:35 PM
Well, on my CVO, I completed the rake to put my new front wheel on it. Hopefully have it finished up and riding on Sunday. Hopefully.
Title: Re: What did you do to or on your CVO today?
Post by: dahsen on November 14, 2013, 10:35:10 PM
Put gas stabilizer in the tank and said good night for the next 5 months.

 :sleeping:



... Sad day.....
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on November 14, 2013, 10:44:20 PM
Put gas stabilizer in the tank and said good night for the next 5 months.

 :sleeping:



... Sad day.....

Sad indeed, 5 months is a long wait.
Title: Re: What did you do to or on your CVO today?
Post by: CVO Aqua-Glider on November 14, 2013, 10:52:41 PM
Haven't been riding much, so I located the battery tender cable behind the left side cover.  Not sure why they put it there as it's a pain to take the bag off to take the cover off, to get to it.  I think I'll just leave it dangling from the bottom of the side cover, so I don't have to keep removing stuff to get to it.  Anyway, I hooked her up to the tender for the night.
Title: Re: What did you do to or on your CVO today?
Post by: WestCoastRuss on November 15, 2013, 02:05:46 PM
Our local riding group did our annual poker run and here we are donating the profits to the area hospice.....
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on November 15, 2013, 02:28:00 PM
Good for you guys that is a good program to support.
Title: Re: What did you do to or on your CVO today?
Post by: Rat Patrol on November 16, 2013, 12:17:25 PM
Add me to the list of people that had to put the babies to bed for winter. Hopefully I will get to do some tinkering through the dark months. Normally I would have the Ducs facing the TV so I can sit on them while watching reruns of World Superbike, but the RK is indeed "Hogging" all the room. :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: Grizzly on November 16, 2013, 12:24:20 PM
Just heading out for a ride on an absolutely glorious day!

Which of course brings a big  ;D  to my face.
Title: Re: What did you do to or on your CVO today?
Post by: 2k on November 16, 2013, 12:26:23 PM
I knew they made the SE Deuce for a reason, just figured out what it was. Heavy Breather dressup on my CUSE4.
Sorry for the crappy pic
(http://www.cvoharley.com/smf/index.php?action=dlattach;topic=89705.0;attach=251769;image)
Sorry Deuce Guyz, that part actually came on a '09 Springer.
Title: Re: What did you do to or on your CVO today?
Post by: FLHTCUSE7 on November 16, 2013, 01:56:46 PM
did run some errands on mine, heading out for a short ride this pm. Warm here for the season, above 40F so no heated gear needed  :pineapple:
Title: Re: What did you do to or on your CVO today?
Post by: Billy on November 16, 2013, 09:03:59 PM
Pictures with tour pak, Wild one 502, I added some small LED lights on the handle bar covers so I don't have to look down with a full face helmet. I also installed Gerbing controls on the heat shields.  I also Powder coated  the headlight trim in shinny black to match the Aux lights      Billy
Title: Re: What did you do to or on your CVO today?
Post by: Billy on November 16, 2013, 09:04:59 PM
Next picture
Title: Re: What did you do to or on your CVO today?
Post by: Billy on November 16, 2013, 09:05:33 PM
Picture # 3
Title: Re: What did you do to or on your CVO today?
Post by: Billy on November 16, 2013, 09:06:01 PM
Picture # 4
Title: Re: What did you do to or on your CVO today?
Post by: Billy on November 16, 2013, 09:06:30 PM
# 5
Title: Re: What did you do to or on your CVO today?
Post by: Billy on November 16, 2013, 09:06:56 PM
Last one
Title: Re: What did you do to or on your CVO today?
Post by: DCFIREMANN on November 17, 2013, 09:33:55 AM
I rode mine!!!!!! Weather is getting chilly and they are calling for rain and cold. So this may be my last chance to ride this season.

Be Safe

THE DAWG
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on November 17, 2013, 12:20:48 PM
Detailed the bike this morning, and prepped for the long winter nap.  Early for me to do that, but it will be snowy/icy and the roads will be covered with salt before I have any time to ride due to travel over the next five weeks.
Title: Re: What did you do to or on your CVO today?
Post by: 2k on November 17, 2013, 12:43:10 PM
No such thing as hibernation round these parts. Will have some cold, snowy, icy days but usually a couple days/weeks when it above 55. Several Christmas 74 and riding. Jan & Feb not so much.
Title: Re: What did you do to or on your CVO today?
Post by: Rickasha on November 17, 2013, 09:58:45 PM
Spent the day in a parking lot with good friends and a bunch of cones practicing slow speed maneuvers.
Title: Re: What did you do to or on your CVO today?
Post by: CVO Aqua-Glider on November 18, 2013, 08:53:27 AM
Moved her from one side of the garage to the other, so I could pull my truck into the garage during the 60 to 70 mph winds yesterday.
Title: Re: What did you do to or on your CVO today?
Post by: Steve48 on November 19, 2013, 03:34:57 AM
Install my new personal license plate
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on November 19, 2013, 05:17:00 PM
Install my new personal license plate
Nice! Waiting for my new plate still.

Title: Re: What did you do to or on your CVO today?
Post by: dahsen on November 19, 2013, 08:52:32 PM
Installed rear fender led strip...   :-*

More info here:  http://www.cvoharley.com/smf/index.php?topic=89461.15
Title: Re: What did you do to or on your CVO today?
Post by: spada84 on November 19, 2013, 09:16:16 PM
Rode from Petersburg, VA to Sumter, SC on a business trip (yesterday actually). 

About 1/2 hour into the trip (on the Interstate, yuck), I was thinking, jeez, got 4.5 more hours of this.  About 1 hour later I was thinking what a great time I was having.  If I can get an early start for the return, I might take the slow way home.
Title: Re: What did you do to or on your CVO today?
Post by: grofcvo on November 20, 2013, 07:14:38 PM
installed 1'' extension for diver floorboards , much comfortable riding position.
 http://vtwingoodies.com/pages/12fl_cvo.html
Title: Re: What did you do to or on your CVO today?
Post by: Grizzly on November 20, 2013, 07:18:45 PM
installed 1'' extension for diver floorboards , much comfortable riding position.
 http://vtwingoodies.com/pages/12fl_cvo.html

I've had those for years and love the comfort of having more of my feet on the boards... You have to watch cornering though because they have a tendency to drag if you lean too much.

Ride safe!
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on November 21, 2013, 12:22:58 AM
Finally got my derby cover on.
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on November 21, 2013, 08:15:47 AM
Nice!
Title: Re: What did you do to or on your CVO today?
Post by: DCFIREMANN on November 21, 2013, 08:59:39 AM
Locking glove box doors on the 2012. The jury is still out. They are black but I might send them out to be painted.

Be Safe

THE DAWG
Title: Re: What did you do to or on your CVO today?
Post by: panz on November 21, 2013, 12:10:43 PM
 >:(Put scoot away for winter, up on floor jack, wheels off the ground, fresh coat of turtle wax, covered up, said good bye til next year. :(
Title: Re: What did you do to or on your CVO today?
Post by: geezerglide on November 21, 2013, 12:43:54 PM
Did two things last week in Phoenix.

Number 1

Put the 120R Screamin Eagle derby Cover on. In retrospect should have had the Eagle reversed, going forward.

Pic 1

geezerglide
Title: Re: What did you do to or on your CVO today?
Post by: geezerglide on November 21, 2013, 12:47:37 PM
Number 2

Had the Wegner "X" header pipe and the Wegner Super Trapps slip ons installed and had bike  tune and Dyno.

See Dyno results in Twin Cam section.

geezerglide
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on November 21, 2013, 04:41:36 PM
Did two things last week in Phoenix.

Number 1

Put the 120R Screamin Eagle derby Cover on. In retrospect should have had the Eagle reversed, going forward.

Pic 1

geezerglide


That cover is sweet.  :bananarock:  Where did you order it from? I'm thinking of a custom cover as well and looking for vendors.
Title: Re: What did you do to or on your CVO today?
Post by: geezerglide on November 21, 2013, 05:44:16 PM

That cover is sweet.  :bananarock:  Where did you order it from? I'm thinking of a custom cover as well and looking for vendors.


Thanks,

Got the derby cover from Custom Engraving, Slinger WI.

email: Sales@custom-engraving-ltd.com

website:  www.custom-engraving-ltd.com

geezerglide

Title: Re: What did you do to or on your CVO today?
Post by: Steve_G on November 21, 2013, 05:52:33 PM
I moved mine out of the way so I could get my snow blower out.
Title: Re: What did you do to or on your CVO today?
Post by: dahsen on November 21, 2013, 06:12:57 PM
I threw my snowblower away to make more room for my CVO...

... True story, was wife décision !!! 

Love her so much...    :-*
Title: Re: What did you do to or on your CVO today?
Post by: Me757 on November 21, 2013, 10:15:23 PM
Sent my side cover to ensure the bags and fender paint match
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on November 21, 2013, 10:55:55 PM
Thanks,

Got the derby cover from Custom Engraving, Slinger WI.

email: Sales@custom-engraving-ltd.com

website:  www.custom-engraving-ltd.com

geezerglide


Got mine from the same place
Title: Re: What did you do to or on your CVO today?
Post by: SpeedisLife on November 21, 2013, 11:27:44 PM
Installed a Klock Werks 8.5" dark tint windshield and a pair of shorty antennas.
Title: Re: What did you do to or on your CVO today?
Post by: Steve48 on November 22, 2013, 01:32:52 AM
Added a old-style HD tool box
Title: Re: What did you do to or on your CVO today?
Post by: Tru-Blu on November 22, 2013, 07:42:18 AM
Geezer, that cover is awesome!  I think the Eagle is facing that direction so he can see what he just whipped by, IMO.   8)

Title: Re: What did you do to or on your CVO today?
Post by: FLHTCUSE7 on November 22, 2013, 08:26:55 AM
Rode to work, 14F here this am. No mosquitos at all  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Skipper on November 22, 2013, 10:57:09 AM
Rode to work, 14F here this am. No mosquitos at all  :2vrolijk_21:

Yep,
Time to take mid-frame deflectors off.  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on November 22, 2013, 03:11:41 PM
Ok, everybody sitting down???















It was 66 degrees here and I rode mine today. :shocked2: :2vrolijk_20: :P :orange: :carrot:

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: BUCKNUT GREG on November 22, 2013, 03:16:15 PM
Ok, everybody sitting down???



 :fireman: :vrolijk27: :2vrolijk_20:











It was 66 degrees here and I rode mine today. :shocked2: :2vrolijk_20: :P :orange: :carrot:

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: SBB on November 22, 2013, 04:46:15 PM
Ok, everybody sitting down???















It was 66 degrees here and I rode mine today. :shocked2: :2vrolijk_20: :P :orange: :carrot:

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:


 No way!



SBB






Title: Re: What did you do to or on your CVO today?
Post by: 110tHunDer on November 22, 2013, 05:12:28 PM
 :worthless:
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on November 22, 2013, 05:31:06 PM

 No way!



SBB







Yes way!!! :bananarock:

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on November 22, 2013, 05:33:51 PM
:worthless:
I'm not that guy... I don't do pictures of myself riding. :nixweiss:

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: aveagle2 on November 22, 2013, 06:04:01 PM
Pictures with tour pak, Wild one 502, I added some small LED lights on the handle bar covers so I don't have to look down with a full face helmet. I also installed Gerbing controls on the heat shields.  I also Powder coated  the headlight trim in shinny black to match the Aux lights      Billy

Nice mods Billy.  Those Gerbings controls on the heat shields is a great idea.  I like the bars too - They look good and the price is nice.  I may go with the 10 inchers - did you have to replace the clutch and brake lines to install the 502?
Title: Re: What did you do to or on your CVO today?
Post by: Billy on November 22, 2013, 07:08:12 PM
Yes we went with 6 inch over just to be safe.  The controls are great no wires flapping in the wind looks clean and  the cables are very easy to install one  handed  Billy
Title: Re: What did you do to or on your CVO today?
Post by: 1sharprdkg on November 22, 2013, 10:20:53 PM
Ok, everybody sitting down???















It was 66 degrees here and I rode mine today. :shocked2: :2vrolijk_20: :P :orange: :carrot:

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
WTF! AGAIN NO WAY! Glad I was sitting down!
Title: Re: What did you do to or on your CVO today?
Post by: FLHTCUSE7 on November 22, 2013, 10:37:16 PM
12F and light snow. Hopefully not sticking since I have a short 100 mile ride in the am. (Obviously if it sticks I will not be on the HD)
Title: Re: What did you do to or on your CVO today?
Post by: Rooster on November 22, 2013, 11:19:56 PM
Atta boy dood.  :worthless: :drink:
Title: Re: What did you do to or on your CVO today?
Post by: CVO Aqua-Glider on November 23, 2013, 08:25:35 PM
29 Degrees, so rode about 40 miles.  Got home, heated the garage, and spent the rest of the day detailing....

(http://farm4.staticflickr.com/3798/11019015305_7424cf8d92_b.jpg) (http://www.flickr.com/photos/62925555@N07/11019015305/)
Untitled (http://www.flickr.com/photos/62925555@N07/11019015305/) by oneboltzfan (http://www.flickr.com/people/62925555@N07/), on Flickr
(http://farm6.staticflickr.com/5479/11019250716_8199fe2560_b.jpg) (http://www.flickr.com/photos/62925555@N07/11019250716/)
Untitled (http://www.flickr.com/photos/62925555@N07/11019250716/) by oneboltzfan (http://www.flickr.com/people/62925555@N07/), on Flickr
(http://farm4.staticflickr.com/3822/11019116696_14836ddfd0_b.jpg) (http://www.flickr.com/photos/62925555@N07/11019116696/)
Untitled (http://www.flickr.com/photos/62925555@N07/11019116696/) by oneboltzfan (http://www.flickr.com/people/62925555@N07/), on Flickr
Title: Re: What did you do to or on your CVO today?
Post by: 2k on November 23, 2013, 08:58:47 PM
Rode bout 150, 53deg........don't look nutin like CVO A~G
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on November 23, 2013, 09:25:05 PM
29 Degrees, so rode about 40 miles.  Got home, heated the garage, and spent the rest of the day detailing....

(http://farm4.staticflickr.com/3798/11019015305_7424cf8d92_b.jpg) (http://www.flickr.com/photos/62925555@N07/11019015305/)
Untitled (http://www.flickr.com/photos/62925555@N07/11019015305/) by oneboltzfan (http://www.flickr.com/people/62925555@N07/), on Flickr
(http://farm6.staticflickr.com/5479/11019250716_8199fe2560_b.jpg) (http://www.flickr.com/photos/62925555@N07/11019250716/)
Untitled (http://www.flickr.com/photos/62925555@N07/11019250716/) by oneboltzfan (http://www.flickr.com/people/62925555@N07/), on Flickr
(http://farm4.staticflickr.com/3822/11019116696_14836ddfd0_b.jpg) (http://www.flickr.com/photos/62925555@N07/11019116696/)
Untitled (http://www.flickr.com/photos/62925555@N07/11019116696/) by oneboltzfan (http://www.flickr.com/people/62925555@N07/), on Flickr
You "detailed it" alright, looks great!
Title: Re: What did you do to or on your CVO today?
Post by: dahsen on November 24, 2013, 07:25:34 PM
Oh...

Saw one in the showroom once...  No way it looked like that!

Nice job !!!
Title: Re: What did you do to or on your CVO today?
Post by: Billy on November 24, 2013, 07:27:34 PM
Rode  50 miles 20 degrees Thanks for Gerbing made for a great ride.       Billy
Title: Re: What did you do to or on your CVO today?
Post by: shelby500 on November 24, 2013, 09:03:08 PM
Dropped mine off at Dragos. Can't wait for the results.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on November 24, 2013, 11:29:19 PM
Dropped mine off at Dragos. Can't wait for the results.
Oooh do tell what are you having done!
Title: Re: What did you do to or on your CVO today?
Post by: shelby500 on November 25, 2013, 08:58:48 AM
Oooh do tell what are you having done!

Little head work, Dracula pipe and 24 cams.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on November 25, 2013, 09:02:18 AM
Little head work, Dracula pipe and 24 cams.
Hell yeah!
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on November 25, 2013, 11:01:31 AM
Little head work, Dracula pipe and 24 cams.

Nice!
Title: Re: What did you do to or on your CVO today?
Post by: cmashark on November 25, 2013, 08:45:23 PM
Last weekend, installed tw-222 cams, Jackpot stainless header, crossover, 4 inch slashed up dyno tuned mufflers, timkens, Jackpot adjustable pushrods, and Woods lifters.

Set the adjustable a to 21 flats ( about .120).  Can't believe how sweet this bike rides and how quiet the top end is now.  Was able to a short 30 mile shake down ride in.  Can't wait till this weekend when the weather clears up a bit.

Chris
Title: Re: What did you do to or on your CVO today?
Post by: Steve_G on November 27, 2013, 05:55:10 PM
I rode to Hot Springs for lunch and came back through Wind Cave National Park.  It was around 50 degrees out.
About 80 miles total.  -Nice ride.  :)
Title: Re: What did you do to or on your CVO today?
Post by: grofcvo on November 27, 2013, 05:56:06 PM
went for a ride to finish this first 1000 miles so I can do first service and do dyno, dragula 2:1 and genesis 577 are waiting..  
Title: Re: What did you do to or on your CVO today?
Post by: denis on November 27, 2013, 05:59:17 PM
looked at my cvo in the garage 28f out side too cold :mango:
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on November 27, 2013, 06:19:17 PM
Picked up my personalized plates today, will put on tomorrow.
Title: Re: What did you do to or on your CVO today?
Post by: FLHTCUSE7 on November 27, 2013, 07:14:03 PM
Nothing,,,,,,its snowing  :(
Title: Re: What did you do to or on your CVO today?
Post by: the jacobite on November 27, 2013, 07:18:08 PM
Put another blanket over her don't want her getting cold -2 tonight
Title: Re: What did you do to or on your CVO today?
Post by: Hx2 on November 27, 2013, 07:34:07 PM
Missed mine. In Okinawa for work.  :-\
Title: Re: What did you do to or on your CVO today?
Post by: alpharisk on November 27, 2013, 07:55:54 PM
Well, I had a credit at Adamec Harley (speedo I ordered that the catalog and computer said would fit, but didn't so got my $$$ back :oops:), so I went to pick up three of those digital oil dipstick replacements. These are the ones that tell you the oil level and temp at a glance. Well, got one each for the Tri-Glide and CVO Road King, but for some reason they don't have one for the CVO Springer. Two out of three I guess.
Title: Re: What did you do to or on your CVO today?
Post by: cyco1450 on November 28, 2013, 01:54:42 PM
polished her a bit (for 100th time), played w/ air susp and put air in tires.  hopefully get her out this weekend??
Title: Re: What did you do to or on your CVO today?
Post by: denis on November 28, 2013, 02:09:07 PM
looked at the bike in the garage too cold today  :orange:
Title: Re: What did you do to or on your CVO today?
Post by: FLHTCUSE7 on November 28, 2013, 03:19:15 PM
3" of fresh snow here so I gave it a bath. Will put on a layer of wax tomorrow.

Hate washing the MC, love riding it.
Title: Re: What did you do to or on your CVO today?
Post by: cmashark on November 28, 2013, 06:01:41 PM
Readjusted the vlaves from 21 flats to 26 flats and took it for a ride...
Title: Re: What did you do to or on your CVO today?
Post by: dahsen on November 28, 2013, 07:46:57 PM
Threw on the cold weather gear and went for a brisk 22°F ride...  but it warmed up to 31°F by the time I was back around 11:30am.

Love to ride at 22°C... But at 22°F...  Time to shine...  8)
Title: Re: What did you do to or on your CVO today?
Post by: SHRK2TH on November 28, 2013, 08:32:26 PM
Installed a J&M Rokker 500watt amp to complete the full sound system.  Awesome sound, and great service!
Title: Re: What did you do to or on your CVO today?
Post by: panz on November 29, 2013, 07:43:18 PM
Scoot put away for the winter months but i ordered her a new set of phase 7 lights (headlight, sidelights) so she can see better at night. Great deal at eastern performance for $332.00 shipped. Black friday special that runs thru cyber monday. :orange:
Title: Re: What did you do to or on your CVO today?
Post by: alpharisk on November 29, 2013, 08:31:52 PM
I put a good friend of mine on the CVO Springer and we went for a ride (me riding along on the CVO RK). He had had never ridden a CVO before and the smile was instantaneous and ear to ear! Priceless!
Title: Re: What did you do to or on your CVO today?
Post by: Billy on November 30, 2013, 05:54:24 PM
Went for a ride to Freds Place in Burlington Wi Best burgers and fries in the world about 40 degrees which felt like summer compared to last weekend at 25 degrees. Can't stop riding till the snow flies        Billy
Title: Re: What did you do to or on your CVO today?
Post by: CVO Aqua-Glider on November 30, 2013, 08:02:04 PM
My Wife and I took her for a beautiful ride!  Actually got up to 62 degs. today. :)
Title: Re: What did you do to or on your CVO today?
Post by: FLHTCUSE7 on November 30, 2013, 08:28:27 PM
62 >:(. Snow on the ground here. Decided to do my annual detailing and it took 7 hours and I still have an hour to go.

But almost every inch is cleaned and waxed including the frame under the engine.

Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on November 30, 2013, 08:30:00 PM
62 >:(. Snow on the ground here. Decided to do my annual detailing and it took 7 hours and I still have an hour to go.

But almost every inch is cleaned and waxed including the frame under the engine.


:worthless: :worthless:

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: timo482 on November 30, 2013, 09:13:53 PM
fuel stabilizer, checked the tires and oils - made sure the batt tender is ok, ran it long enough to get the fuel stabile through the system.

high next weekend in the single digits and working all week so even if it really gets to 40 i won't be around here..... all the roads are covered with salt scum already so I'm pretty much done for the year

*sigh*

to
Title: Re: What did you do to or on your CVO today?
Post by: krypto2011 on November 30, 2013, 09:21:08 PM
Finished my led headlight and passing light install
Title: Re: What did you do to or on your CVO today?
Post by: Fireguy on November 30, 2013, 10:00:30 PM
@krypto2011, that looks like a phase7 headlight. I noticed the light doesn't extend pass the trim ring. Is it a bigger trim ring or did you do something else? Looks much better than having it extend pass the ring.
Title: Re: What did you do to or on your CVO today?
Post by: krypto2011 on November 30, 2013, 10:18:05 PM
@krypto2011, that looks like a phase7 headlight. I noticed the light doesn't extend pass the trim ring. Is it a bigger trim ring or did you do something else? Looks much better than having it extend pass the ring.
Yes phase 7 and kuryakyn led passing lamps. The trim ring is the extended version I guess you would call it. I bought the bike used with 1100 miles on it. I assumed all cvo's had them but maybe previous owner added it??? The original thinner one is under it and the extended one actually tucks around the thinner one to hold it in place. Definitely looks better than the phase 7 sticking way out beyond the ring.
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on November 30, 2013, 10:22:29 PM
Just added the Phase 7 lights to mine too. Been to cold and busy to try them out on a night ride though. Next mod will be the LED turn signals and tourpack lights from Custom Dynamics.   ;D
Title: Re: What did you do to or on your CVO today?
Post by: Me757 on December 01, 2013, 09:20:11 AM
I just put the daymakers on, I bought them when Harley had there big sale got 75% off. And they light up the entire interstate
Title: Re: What did you do to or on your CVO today?
Post by: FLHTCUSE7 on December 01, 2013, 02:25:47 PM
Did go for a short run down the street to get the oil heated up and the fuel stabilizer in all the lines b

Shinny since it was detailed yesterday.

Now waiting for the new aircleaner and chrome cover for the belt drive.

Looking forward to SPRING
Title: Re: What did you do to or on your CVO today?
Post by: FLHTCUSE7 on December 01, 2013, 02:26:19 PM
Another one
Title: Re: What did you do to or on your CVO today?
Post by: FLHTCUSE7 on December 01, 2013, 02:26:43 PM
Last one
Title: Re: What did you do to or on your CVO today?
Post by: 05Train on December 01, 2013, 02:43:59 PM
Installed a pair of Agitator wheels purchased from CVOJIMMYC, and stuck in a pair of stock-height Monotubes.

(http://i48.photobucket.com/albums/f229/rthomp159/IMG_2430_zps55255311.jpg) (http://s48.photobucket.com/user/rthomp159/media/IMG_2430_zps55255311.jpg.html)
Title: Re: What did you do to or on your CVO today?
Post by: dayne66 on December 01, 2013, 02:45:47 PM
Always thought that 'my' wheels would look great on an CVO Ultra....and you have the proof.
Title: Re: What did you do to or on your CVO today?
Post by: 05Train on December 01, 2013, 02:52:47 PM
Always thought that 'my' wheels would look great on an CVO Ultra....and you have the proof.
Thanks!

I didn't dislike the Chisel wheels, but these just look soooooo right.
Title: Re: What did you do to or on your CVO today?
Post by: dayne66 on December 01, 2013, 02:56:05 PM
Gonna have to swap your air cleaner next.
Title: Re: What did you do to or on your CVO today?
Post by: 05Train on December 01, 2013, 03:38:13 PM
Gonna have to swap your air cleaner next.
Typical Harley, you can't just buy the Agitator cover....
Title: Re: What did you do to or on your CVO today?
Post by: spada84 on December 02, 2013, 03:44:27 PM
Rode with 4 friends to Roanoke for the Toys for Tots ride.  24 deg when I left the house.  Saw a low of 21 on the way.  1300 bikes on 1 hour police guided ride thru Salem, Roanoke, Vinton, and back to Salem.  380 miles by the time I got home.

Interestingly, all 4 of us are (old) vets.  57, 57, 63, and 64.  2 young guys both Navy, 1 former Seal (Vietnam and "maybe other places"), 1 retired Army SSGT (Vietnam and Desert Storm).  The SSGT rides a Tri-Glide due to Agent Orange issues.  His first "bike".  Been riding 3 years, has 60K plus on the trike.  Rode to CA, then SW (different trip).  He's leaving on Wednesday for Maine (!) to escort the truck with the wreaths for Wreaths Across America.  Good Times and Great Guys.  I am honored to call them friends.
Title: Re: What did you do to or on your CVO today?
Post by: krypto2011 on December 02, 2013, 05:40:40 PM
Rode with 4 friends to Roanoke for the Toys for Tots ride.  24 deg when I left the house.  Saw a low of 21 on the way.  1300 bikes on 1 hour police guided ride thru Salem, Roanoke, Vinton, and back to Salem.  380 miles by the time I got home.

Interestingly, all 4 of us are (old) vets.  57, 57, 63, and 64.  2 young guys both Navy, 1 former Seal (Vietnam and "maybe other places"), 1 retired Army SSGT (Vietnam and Desert Storm).  The SSGT rides a Tri-Glide due to Agent Orange issues.  His first "bike".  Been riding 3 years, has 60K plus on the trike.  Rode to CA, then SW (different trip).  He's leaving on Wednesday for Maine (!) to escort the truck with the wreaths for Wreaths Across America.  Good Times and Great Guys.  I am honored to call them friends.

Sweet!!!! Thanks for you service!!
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on December 02, 2013, 10:07:36 PM
Rode with 4 friends to Roanoke for the Toys for Tots ride.  24 deg when I left the house.  Saw a low of 21 on the way.  1300 bikes on 1 hour police guided ride thru Salem, Roanoke, Vinton, and back to Salem.  380 miles by the time I got home.

Interestingly, all 4 of us are (old) vets.  57, 57, 63, and 64.  2 young guys both Navy, 1 former Seal (Vietnam and "maybe other places"), 1 retired Army SSGT (Vietnam and Desert Storm).  The SSGT rides a Tri-Glide due to Agent Orange issues.  His first "bike".  Been riding 3 years, has 60K plus on the trike.  Rode to CA, then SW (different trip).  He's leaving on Wednesday for Maine (!) to escort the truck with the wreaths for Wreaths Across America.  Good Times and Great Guys.  I am honored to call them friends.

Sounds like an great ride and some great people to ride with, thanks for posting.  I just walked past my bike coming in tonight.
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on December 02, 2013, 10:47:51 PM
Installed a pair of Agitator wheels purchased from CVOJIMMYC, and stuck in a pair of stock-height Monotubes.

(http://i48.photobucket.com/albums/f229/rthomp159/IMG_2430_zps55255311.jpg) (http://s48.photobucket.com/user/rthomp159/media/IMG_2430_zps55255311.jpg.html)
Really looks great!
Title: Re: What did you do to or on your CVO today?
Post by: DCFIREMANN on December 03, 2013, 12:46:55 PM
Today I am going to wash mine. Tomorrow I will again ride it to bury another coworker!!! It has been a tough year for the District of Columbia fire Department!!!!

Be Safe

THE DAWG
Title: Re: What did you do to or on your CVO today?
Post by: panz on December 03, 2013, 01:10:54 PM
Ordered phase 7 headlight and passing lamps from eastern performance on their Black Friday sale for $332.00 shipped to door and then went to Harley store and purchased the French light rims to finish it off. Now just waiting for delivery to install and wait for clean roads here in Ohio to try them out. :cucumber:
Title: Re: What did you do to or on your CVO today?
Post by: CVO Aqua-Glider on December 03, 2013, 02:12:10 PM
Rode her to work. :)
Title: Re: What did you do to or on your CVO today?
Post by: spada84 on December 03, 2013, 04:54:15 PM
Today I am going to wash mine. Tomorrow I will again ride it to bury another coworker!!! It has been a tough year for the District of Columbia fire Department!!!!

Be Safe

THE DAWG

My thoughts and prayers are riding with you.
Title: Re: What did you do to or on your CVO today?
Post by: cambo on December 03, 2013, 06:51:22 PM
Rode up to town center to check out the Christmas lights.

(http://farm8.staticflickr.com/7317/11196994176_8002fb5682_b.jpg) (http://www.flickr.com/photos/33856264@N03/11196994176/)
Title: Re: What did you do to or on your CVO today?
Post by: SBB on December 03, 2013, 06:53:17 PM
Rode up to town center to check out the Christmas lights.

(http://farm8.staticflickr.com/7317/11196994176_8002fb5682_b.jpg) (http://www.flickr.com/photos/33856264@N03/11196994176/)


What a beautiful bike.
Where is that little fairing you had painted to match?

SBB


Title: Re: What did you do to or on your CVO today?
Post by: cambo on December 03, 2013, 07:24:07 PM
What a beautiful bike.
Where is that little fairing you had painted to match?

SBB



Thank you Chip. The fairing is not quite ready for primetime yet. Currently at Xtreme Dimension and then I need to do something with the headlight to make it fit properly. I'll post detail and pics as soon as it all comes together. Hopefully next week.

Cam
Title: Re: What did you do to or on your CVO today?
Post by: 05Train on December 03, 2013, 07:25:06 PM
Rode up to town center to check out the Christmas lights.

(http://farm8.staticflickr.com/7317/11196994176_8002fb5682_b.jpg) (http://www.flickr.com/photos/33856264@N03/11196994176/)

Looks good.  I'm right across the river from Leesburg.
Title: Re: What did you do to or on your CVO today?
Post by: SBB on December 03, 2013, 07:37:37 PM
Thank you Chip. The fairing is not quite ready for primetime yet. Currently at Xtreme Dimension and then I need to do something with the headlight to make it fit properly. I'll post detail and pics as soon as it all comes together. Hopefully next week.

Cam


Can't wait to see it Cam.
I know it will be right.
Remember, we need pictures!

SBB




Title: Re: What did you do to or on your CVO today?
Post by: phato1 on December 03, 2013, 07:59:16 PM
Dropped off the tour pack at the painters for a little makeover  ;) 

after all, mod season is upon us.

Right now the bike now looks like a one of a kind CVO street glide  -- with speakers sitting on top of the bags instead of built into them....
Title: Re: What did you do to or on your CVO today?
Post by: Billy on December 03, 2013, 08:26:05 PM
Dropped off 14 serk to have tour pack lights installed       Billy
Title: Re: What did you do to or on your CVO today?
Post by: cambo on December 03, 2013, 08:27:37 PM
Looks good.  I'm right across the river from Leesburg.
We are practically neighbors. My buddies and I usually come over to your side because there are a lot of great roads to explore. Let me know if you are ever in our neck'o'th'woods.
Title: Re: What did you do to or on your CVO today?
Post by: cambo on December 03, 2013, 08:33:00 PM

Can't wait to see it Cam.
I know it will be right.
Remember, we need pictures!

SBB





Thanks Chip. I am taking pictures of all the bits and pieces and will post in case anyone else would like to go down the same path.
Title: Re: What did you do to or on your CVO today?
Post by: Para Bellum on December 04, 2013, 04:28:02 AM
Replaced the voltage regulator on '11 SERGU.  Remember the recall on 2012 model VRs?  Lots of posts here by people with bad VRs outside the recall window.  The VR that went bad had a manufactured date code of 1513 (15th week of '13), so it wasn't the original.  Wasn't thrilled to see new VR with same 1513.

Then rode in an ABATE toy run parade, got rained on, went to breakfast with 10 friends, started to go on a ride together but got rained on again (heavily), so we all rode on home.
Title: Re: What did you do to or on your CVO today?
Post by: CVO Aqua-Glider on December 04, 2013, 08:33:45 AM
Re-attached the right side running light after it fell out while cleaning.  Never had that happen before, but I was wiping off some BugSlide with a microfiber and must of turned the trim ring with too much force.  Put it back on and made sure I tightend it and the other side realy good. :)
Title: Re: What did you do to or on your CVO today?
Post by: FLHTCUSE7 on December 04, 2013, 08:36:09 AM
Well we got 10" of snow yesterday and another 15"-18" expected today, looks like the season is over here.

Where is global warming when you need it Al Gore?
Title: Re: What did you do to or on your CVO today?
Post by: Gecko on December 04, 2013, 06:01:12 PM
Wasn't today, but Monday we had 65 degrees here in Nebraska and I hadn't been on the SERK for nearly two years.  My brother was killed in a work accident while the wife and I were on the way to Sturgis in 2011 and it just kind of took the wind out of my sails.  Anyway, thought I'd better at least run it for a while before winter sets in.  Went for a short ride and think I'll get back into riding.
Title: Re: What did you do to or on your CVO today?
Post by: hawkeye4jw on December 05, 2013, 01:48:16 PM
Little head work, Dracula pipe and 24 cams.

 So does that mean you got the new bike? How do you like it? Just put mine to bed for the winter. :~(

 Jack
Title: Re: What did you do to or on your CVO today?
Post by: shelby500 on December 05, 2013, 04:08:44 PM
So does that mean you got the new bike? How do you like it? Just put mine to bed for the winter. :~(

 Jack
Yes I got it on the 15th of last month. Now time to tinker a little. Then put away till Bike Week.
Title: Re: What did you do to or on your CVO today?
Post by: hawkeye4jw on December 05, 2013, 04:16:07 PM
Yes I got it on the 15th of last month. Now time to tinker a little. Then put away till Bike Week.

 Nice. It came in early. How do you like it? Saw one in the sun the other day. Looks really good. Did I tell you I found a heated Hammock seat for mine. The wife really likes it and I think I like it better then my Mustang. Will use it for traveling. Got the tour pak backrest and drivers backrest too match also.

Jack
Title: Re: What did you do to or on your CVO today?
Post by: shelby500 on December 05, 2013, 05:17:57 PM
Only 180 miles on it. One afternoon ride is all that we got before the weather turned. So for I'm liking it. Wife really likes it,more room and better seat!
Title: Re: What did you do to or on your CVO today?
Post by: Billy on December 05, 2013, 08:37:19 PM
Picked up my 14 Serk. They just installed light bar on the back of the tour pak Looks great and can be seen very well. 23 degree ride home but with Gerbing I could ride all day. This 14 Serk is so much better than the 07 Billy
Title: Re: What did you do to or on your CVO today?
Post by: denis on December 05, 2013, 09:24:03 PM
removed old cfr slip ons recall on chrome  instaled the new replacements sounds good but about 25f outside so put away for winter >:(
Title: Re: What did you do to or on your CVO today?
Post by: hawkeye4jw on December 05, 2013, 09:28:49 PM
Only 180 miles on it. One afternoon ride is all that we got before the weather turned. So for I'm liking it. Wife really likes it,more room and better seat!

My wife liked the stock seat on the 09 but it wasn't my favorite. This new Hammock seems like it is going to be a good long distance seat. I forgot they moved the trunk back and angled the backrest on the 14's.

Jack
Title: Re: What did you do to or on your CVO today?
Post by: 2k on December 06, 2013, 03:43:28 PM
Have always rode a Freedom, time for new so I figured I'd try the Clearview Mail Slot. Went for a 50 mile scoot with super high winds, crack the slot open and my unzipped jacket stopped flapping!
Title: Re: What did you do to or on your CVO today?
Post by: 2k on December 06, 2013, 03:49:16 PM
One more
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on December 06, 2013, 03:56:20 PM
Have always rode a Freedom, time for new so I figured I'd try the Clearview Mail Slot. Went for a 50 mile scoot with super high winds, crack the slot open and my unzipped jacket stopped flapping!
Didn't help your avatar. :D :D :D

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on December 06, 2013, 06:10:11 PM
Didn't help your avatar. :D :D :D

Seems more of a jiggly, wiggly, bounce  ;)
Title: Re: What did you do to or on your CVO today?
Post by: Rooster on December 07, 2013, 09:48:42 AM
Put a smile on my face Gary, good one. :huepfenlol2:
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on December 07, 2013, 05:01:37 PM
dropped it off at the shop to get a Tman (tune up!) done, now I'm just going to hurry up and wait for it & the weather to come back  ::) 
Title: Re: What did you do to or on your CVO today?
Post by: FLHTCUSE7 on December 07, 2013, 06:40:34 PM
swapped air filter unit to the new billet ventilator style. its a 1/2 beer job  :drink:
Title: Re: What did you do to or on your CVO today?
Post by: CVO Aqua-Glider on December 07, 2013, 06:48:21 PM
swapped air filter unit to the new billet ventilator style. its a 1/2 beer job  :drink:

Well then while you're drinking the other half, post up a pick please. :)
Title: Re: What did you do to or on your CVO today?
Post by: daveinhouston on December 07, 2013, 07:09:12 PM
Changed the 2" baffles on my Rinehart 4" slip-ons to the 2 1/4" High Flo baffles on my 2013 Ultra CVO Ann. I didn't like the sound of the standard baffles. The 2 1/4" are an improvement. They are a little louder, deeper and have a better "burbling" sound than the old ones. Haven't made a road trip with them but will when the weather clears up and see if they're not too load. Definitely worth the $89.99. Relatively easy changeout. Grabbed the old ones with vise grips, wiggled them a little, and they came right out.
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on December 07, 2013, 10:01:34 PM
One more
Best avatar yet!!!
Title: Re: What did you do to or on your CVO today?
Post by: AMEDD_SFC on December 08, 2013, 12:09:03 AM
Slapped on a demo Windsplitter shield on the Big Red One and went for a quick check ride.

It was 34 degrees outside, but I had to give this a try around the "block".  I have a a great route with quick access to the Interstate that amounts to about  5 miles that I use for checking things out and doing check rides.

First, let me tell you that 34 degrees is COLD!! - especially down here in San Antonio where we just don't see these temps!!!   :cowboy:

I put on the 7 inch Windsplitter on in about 1 minute - easy install.
To put things to the acid test, I just wore a ball cap (facing forward).

After warming up the bike I headed out down the road - one mile to the Interstate @ 45 mph. 
Once on the IH, I got her up to about 70 - 75 for a couple of miles.  I was very pleased that the wind did not try to blow my cap off.  Granted, I was hunkering down a bit - did I mention it was COLD?!!

Anyway, I am 5'11" and my experience is that the 7 inch Wind Splitter is just as effective as the stock 10" shield.

It was a short ride, but I plan to put in some miles to see if I really like it.  My HD parts guy told me to bring the Demo back "whenever" as he knows it takes more than a day or two to really get the feel of a new wind screen.

All I have to say is that my initial impression is very positive and that I think the 7 in Wind Splitter is a good replacement for the stock 10 in. shield.

I think the shield adds a cool factor of  +10 and really opens up the front visibility.   I am looking forward to putting in some miles with the new shield. Even if it does not hold up over the long haul, I plan to get one for every day riding and us the stock shield for touring.

Best Regards,
Mark
Title: Re: What did you do to or on your CVO today?
Post by: CVO Aqua-Glider on December 08, 2013, 01:20:12 AM
Thanks for the review Mark. It looks good on your bike too.
Title: Re: What did you do to or on your CVO today?
Post by: DaBigNuttedMan on December 08, 2013, 10:56:29 AM
rehooked the battery tender and thought DAMM it's gonna be until the 2nd big rain in march or april to kill the salt on the road, feeling that I'm getting old or turning into a big sissy or sumthin 'lived in Indiana scince  07 bought this scoot in 2011 and having grown up and lived in socal used to ride all year. this takes some getting used to, guess I am a sissy or I'd put this thing on the salt and twist it up. :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: Pete7539 on December 08, 2013, 11:42:37 AM
Best avatar yet!!!

Am I the only one who right clicks his avatars and opens them in a new tab for a better view :P
Title: Re: What did you do to or on your CVO today?
Post by: cambo on December 08, 2013, 01:34:13 PM
Looked outside, accepted defeat, connected the battery tender, took one more picture (below), pulled the cover over the bike, made myself an Irish coffee, and started staring out the window! :(

(http://farm4.staticflickr.com/3712/11274257843_0b039d47ca_b.jpg) (http://www.flickr.com/photos/33856264@N03/11274257843/)
Title: Re: What did you do to or on your CVO today?
Post by: shovelhead FXEF on December 08, 2013, 02:56:45 PM
Wasn't today, but Monday we had 65 degrees here in Nebraska and I hadn't been on the SERK for nearly two years.  My brother was killed in a work accident while the wife and I were on the way to Sturgis in 2011 and it just kind of took the wind out of my sails.  Anyway, thought I'd better at least run it for a while before winter sets in.  Went for a short ride and think I'll get back into riding.

I'm sure your brother is smiling from above and I bet he approves!!  Welcome back
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on December 08, 2013, 03:34:29 PM
Found the source of a new rattle that was driving me nuts...

http://ridingtwoup.wordpress.com/2013/12/08/chasing-rattles-on-both-harleys-its-those-darn-bridges/

Mounting hardware worked its way loose on the cylinder head bridges...

(http://ridingtwoup.files.wordpress.com/2013/12/flh_bridge.jpg?w=500)
Yea, unfortunately that has been noted here before :(.

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: backroad Mike on December 08, 2013, 04:14:05 PM
Installed Progressive cartridges in the forks.

Have to wait for the snow/ice to dry up or melt before I can take a test ride.

Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on December 08, 2013, 04:29:51 PM
Not a thing, just walked past the bike covered up in the garage.  Light snow all day today, really cold.
Title: Re: What did you do to or on your CVO today?
Post by: 2k on December 08, 2013, 07:18:56 PM
Painted the speaker grills  & installed one of Mike C's hidden axle's on the SERK, yep I know

 :worthless:
Title: Re: What did you do to or on your CVO today?
Post by: BUCKNUT GREG on December 08, 2013, 08:04:48 PM
I don't believe I've ever seen a post of yours with out  a PIC.

Subjective or Not..... :huepfenlol2:
Title: Re: What did you do to or on your CVO today?
Post by: deldago on December 08, 2013, 08:31:26 PM
We just want to know what she is bouncing on 2k!
Title: Re: What did you do to or on your CVO today?
Post by: 2k on December 08, 2013, 09:09:21 PM
Grills still on shelf, but here's the axle

Title: Re: What did you do to or on your CVO today?
Post by: 2k on December 08, 2013, 09:09:58 PM
Other side
Title: Re: What did you do to or on your CVO today?
Post by: 2k on December 08, 2013, 09:11:08 PM
Forgot a B4 pic.....this is the best I could do
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on December 09, 2013, 06:37:58 AM
Grills still on shelf, but here's the axle


Looks good I need to do that this winter. What axle did you go with?
Title: Re: What did you do to or on your CVO today?
Post by: 2k on December 09, 2013, 06:53:16 AM
I got mine from Puzzled, a member & vendor on site. Unlike some, he is a member 1st. I really like how getting rid of the nuts on the rt side cleaned it up. Very easy install if you have a little help. 90% one man job, lining axle up to go back in is a lot easier with extra hands. Press fit lft side threaded piece first......or be prepared  :sauer055:
Title: Re: What did you do to or on your CVO today?
Post by: 2k on December 09, 2013, 06:57:28 AM
We just want to know what she is bouncing on 2k!

Not me :bigcry: :bigcry: :bigcry:. A treadmill
Title: Re: What did you do to or on your CVO today?
Post by: 2k on December 09, 2013, 11:14:37 AM
Looks good I need to do that this winter. What axle did you go with?

I also used puzzle's 'Bad as Hell' fork cap. Because its like they say...........Nuts are for Squirrels
Hope this helps, Jswerve. Or anybody else that needs the info.
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on December 09, 2013, 07:37:29 PM
walked by the bike in the garage on the way to get the snow shovel....

By the way 2k, the better half saw your avitar and said " now I see why you're on that computer every night" ......

What can I say   :nixweiss:

At least she has a sense of humor  :huepfenlol2:
Title: Re: What did you do to or on your CVO today?
Post by: 2k on December 09, 2013, 08:18:33 PM
walked by the bike in the garage on the way to get the snow shovel....
By the way 2k, the better half saw your avitar and said " now I see why you're on that computer every night" ......
What can I say   :nixweiss:
At least she has a sense of humor  :huepfenlol2:

Glad I didn't get you in trouble  :coolblue:
Title: Re: What did you do to or on your CVO today?
Post by: Giulio_derrico on December 09, 2013, 11:26:49 PM
Hey all,

Yesterday I've got my Kuryakyn smartphone fairing mount and I've installed it on the spot, it looks amazing and can't wait to test it this weekend.

Cheers

Giulio
Title: Re: What did you do to or on your CVO today?
Post by: Rooster on December 10, 2013, 10:51:57 AM
Hey all,

Yesterday I've got my Kuryakyn smartphone fairing mount and I've installed it on the spot, it looks amazing and can't wait to test it this weekend.

Cheers

Giulio
Well :worthless:
Title: Re: What did you do to or on your CVO today?
Post by: Mrs Rooster on December 10, 2013, 11:00:46 AM
 Santa's been busy  :elf:
Title: Re: What did you do to or on your CVO today?
Post by: 2k on December 10, 2013, 11:52:59 AM
Santa's been busy  :elf:
The Rooster is lucky to have someone that understands. I can hide the money......can't hide the big brown truck!  :zroflmao:
Title: Re: What did you do to or on your CVO today?
Post by: Rooster on December 10, 2013, 02:27:37 PM
 :huepfenlol2:
Title: Re: What did you do to or on your CVO today?
Post by: Giulio_derrico on December 10, 2013, 02:54:07 PM
Well :worthless:

You are right; I will post the picture tomorrow  :oops:
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on December 13, 2013, 08:35:24 AM
Nothing going to happen to the bike today other than research on the internet for some potential projects.
Title: Re: What did you do to or on your CVO today?
Post by: CVO Aqua-Glider on December 13, 2013, 09:01:28 AM
Nothing going to happen to the bike today other than research on the internet for some potential projects.

Sucks don't it? Looks like things could get nasty later today.  I'll probably finally hook mine up to a tender. :(
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on December 13, 2013, 09:27:52 AM
Finally had three good, dry salt free days to ride in.  Wed. morning was 22, yesterday was 18 and today was a balmy 26.  Most don't but I love the cold weather days, just not the salt, ice or snow on the roads.  Luckily we don't have to bother with that much here in East Tennessee, just the cold.  Only time of the year I don't sweat..... ;D
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on December 13, 2013, 10:59:21 AM
Sucks don't it? Looks like things could get nasty later today.  I'll probably finally hook mine up to a tender. :(

Yes it does suck, hopefully we will not have much ice and see more snow out of this winter event.
Title: Re: What did you do to or on your CVO today?
Post by: D-N-D on December 13, 2013, 11:06:00 AM
I put the Snow Blower in front of the bike getting ready for 6 more inch's tomorrow, we got 9 inch's last Sunday and 5 inch's more last Tuesday !!!
Title: Re: What did you do to or on your CVO today?
Post by: Giulio_derrico on December 13, 2013, 12:45:17 PM
And now with pictures  :bananarock:
Title: Re: What did you do to or on your CVO today?
Post by: hogasm on December 13, 2013, 01:52:48 PM
Ordered a new battery to replace the one I installed back in 2006 :soapbox:
Title: Re: What did you do to or on your CVO today?
Post by: Buck765 on December 13, 2013, 10:29:28 PM
installed H.D.headlight modulator and a Wardspartswerks cooling fan while I watched it snow.
Title: Re: What did you do to or on your CVO today?
Post by: grofcvo on December 13, 2013, 11:51:24 PM
 got my matching color trunk 
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on December 14, 2013, 02:17:52 AM
Installed the mid-frame air defectors with the Gerbing power supply installed on left side and Covingtons horn (link below)
http://www.covingtonscyclecity.com/#scene=Catalog&partnumber=C1141-B
Title: Re: What did you do to or on your CVO today?
Post by: 2k on December 14, 2013, 05:52:29 AM
got my matching color trunk  

I would guess it looks good, butt........

 :worthless:
Title: Re: What did you do to or on your CVO today?
Post by: 2k on December 14, 2013, 10:19:58 AM
Took a short scoot to beat the rain. Walked up to the building this AM. What? FFT!  :sauer005: Found the hitchhiker!
Title: Re: What did you do to or on your CVO today?
Post by: 2k on December 14, 2013, 10:21:45 AM
Tire had 754mi. Here's my answer........I know, you can't do that!!
Title: Re: What did you do to or on your CVO today?
Post by: dlaws01 on December 14, 2013, 11:18:16 AM
Ordered a new battery to replace the one I installed back in 2006 :soapbox:

They just don't make those batteries to last like they used too anymore! 
Title: Re: What did you do to or on your CVO today?
Post by: 2k on December 14, 2013, 11:21:35 AM
I'm a big fan of pluggin'...

I'm just mindful that I do it and keep an eye on those repairs over the life of the tire.  Hasn't bitten me yet. Flame away...

I agree FXD, watch it closely and if should start to leak/crack at that spot......trash it!!
Title: Re: What did you do to or on your CVO today?
Post by: porthole on December 14, 2013, 12:11:36 PM
Pulled the ECM out to send back to RP - if they are actually doing any customer service.

Put it up on the jack, pushed it to the corner,  covered it and waiting for the spring rains.
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on December 16, 2013, 04:32:44 PM
Researched some lifts, I need to be able to move the bike around in the garage and take the weight off the tires.
Title: Re: What did you do to or on your CVO today?
Post by: Billy on December 16, 2013, 05:03:02 PM
Installed Hot Toppers and watch it snow looks like a long winter Billy
Title: Re: What did you do to or on your CVO today?
Post by: FLHTCUSE7 on December 16, 2013, 09:08:06 PM
Researched some lifts, I need to be able to move the bike around in the garage and take the weight off the tires.

I would be careful with that. Shock absorbers are designed to take the load pushing down on them, not hanging load. Not Sure how the HD shocks and fork are designed but for high end car suspension this is not a good idea. I doubt there is a mechanical stop in our units that would prevent a possible issue.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on December 16, 2013, 09:24:02 PM
I would be careful with that. Shock absorbers are designed to take the load pushing down on them, not hanging load. Not Sure how the HD shocks and fork are designed but for high end car suspension this is not a good idea. I doubt there is a mechanical stop in our units that would prevent a possible issue.
What? I leave my bike on the jack suspended every winter? Never have any issues... :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: SHRK2TH on December 16, 2013, 09:38:19 PM
What? I leave my bike on the jack suspended every winter? Never have any issues... :nixweiss:

I also lift mine just enough to take the weight off tires, maybe 1/4 clearance.  No issues that I know of.
Any other information of this topic?
Title: Re: What did you do to or on your CVO today?
Post by: FLHTCUSE7 on December 16, 2013, 09:48:06 PM
 Sorry I have no info on MC shocks. Like I said it's an issue on high performance shocks, for high performance cars, so it might not be an issue on a MC but I would not do it.

If you are concerned with flats spots just move the MC once a month.
Title: Re: What did you do to or on your CVO today?
Post by: porthole on December 16, 2013, 10:07:48 PM
What happens to the shocks when they are sitting on the shelf in a box?
Title: Re: What did you do to or on your CVO today?
Post by: FLHTCUSE7 on December 16, 2013, 10:08:26 PM
But thinking some more about it that would mean center stands would be bad as well and most store MCs with center stand on the actual center stand  :nixweiss: so I think my whole philosophy is wrong on bikes.

Think I will put mine up on the lift as well  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: FLHTCUSE7 on December 16, 2013, 10:09:44 PM
What happens to the shocks when they are sitting on the shelf in a box?

Well in a box no load or weight is exerting a force on the shocks
Title: Re: What did you do to or on your CVO today?
Post by: 2k on December 17, 2013, 08:30:52 AM
Heard good things about J&S. Never had a reason to go away from my PitBull. Roll scoot around with hardly any effort. Spin 360deg or anything else.
Title: Re: What did you do to or on your CVO today?
Post by: CVO Aqua-Glider on December 17, 2013, 08:52:02 AM
Heard good things about J&S. Never had a reason to go away from my PitBull. Roll scoot around with hardly any effort. Spin 360deg or anything else.

If I were to buy a new jack stand I'd buy the J & S after watching all the videos on youtube.  I was until I realized my Sears yellow jack allows me to move the bike around too.  Not as easy as the J&S, but still...How much am I gonna move a bike parked for winter?  I'll probably just keep my Sears lift.
Title: Re: What did you do to or on your CVO today?
Post by: FLHTCUSE7 on December 17, 2013, 09:00:17 AM
I got an old Sears lift. Works well for me
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on December 17, 2013, 01:43:28 PM
I will probably go with the J&S, it will be nice to have something to help with oil changes, etc..
Title: Re: What did you do to or on your CVO today?
Post by: AMEDD_SFC on December 17, 2013, 02:47:25 PM
I will probably go with the J&S, it will be nice to have something to help with oil changes, etc..

You won't be disappointed.

They have a VET discount - and maybe even a CVO forum discount (can't remember).  Worth asking, tho'.
They were very nice to deal with and shipped very quickly. 
You are dealing with a family business - that's important to me.

One tip, however.  I was having a devil of a time getting the jack high enough to engage the support at the highest level.  All it took was for me to screw out the top of the jack into the cross bar 1/2 in to snug it up.  Might have been in the instructions, but I missed it.  Anyway, it works great and is super stable.

The first time I put my Ultra on the Sears Yellow Jack I almost had a heart attack.  Sold it to a bud with a SG   :nixweiss:

Regards,

Mark
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on December 17, 2013, 04:23:16 PM
Sorry I have no info on MC shocks. Like I said it's an issue on high performance shocks, for high performance cars, so it might not be an issue on a MC but I would not do it.

If you are concerned with flats spots just move the MC once a month.
No thanks I'll just lift it up once and leave it there for 4 months like I always do. To each his own. I don't consider stock Harley shocks high performance car shocks anyway  :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: deldago on December 17, 2013, 04:29:12 PM
I don't consider stock Harley shocks high performance car shocks anyway  :nixweiss:
Or high performance period!
Title: Re: What did you do to or on your CVO today?
Post by: FLHTCUSE7 on December 17, 2013, 08:48:47 PM
I agree, stock HD suspension is close to junk.

Or high performance period!
Title: Re: What did you do to or on your CVO today?
Post by: 2k on December 18, 2013, 06:51:15 AM
I agree, stock HD suspension is close to junk.


Real close to no performance...........period!!!
Title: Re: What did you do to or on your CVO today?
Post by: CVO2FIXUP on December 18, 2013, 09:02:50 PM
 Installed some sweet RSD parts and a black horn cover I got from a forum member.
Title: Re: What did you do to or on your CVO today?
Post by: CVO2FIXUP on December 18, 2013, 09:06:14 PM
Horn cover and RSD trans cover. I phone shot is not that good.
Title: Re: What did you do to or on your CVO today?
Post by: CVO2FIXUP on December 18, 2013, 09:08:01 PM
 The flash made the pick look funny. In real life it looks killa.
Title: Re: What did you do to or on your CVO today?
Post by: CVO2FIXUP on December 18, 2013, 09:09:31 PM
Another shot of the tips. Love RSD.
Title: Re: What did you do to or on your CVO today?
Post by: Rooster on December 19, 2013, 11:13:50 AM
Installed some sweet RSD parts and a black horn cover I got from a forum member.
Man those hinges on your tour pack look good. :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: TC44 on December 19, 2013, 06:14:47 PM
I finally caught a break and got to ride er'!!  woo-hoo!  The guys in the MM decided that the Screamin' Eagle Street Canons are too loud on the interstate at 70 -75 mph.  The only way they will ride with me is if I'm tailgunner.  LOL. Anyway, I have decided to let Steve at Fullsac modify my bafles.  The problem is  I don't know whether to get the 1.75" or 2" baffles.  If you all have one I would like to hear opinions / input.

Thanks in advance,

TC   
Title: Re: What did you do to or on your CVO today?
Post by: 2k on December 19, 2013, 06:47:59 PM
Man those hinges on your tour pack look good. :2vrolijk_21:
Had to look close, for a minute I thought the tourpak was chrome and the hinges were blue!!! :coolblue:
Title: Re: What did you do to or on your CVO today?
Post by: Skillet on December 19, 2013, 08:29:55 PM
Walked by it on the way to work driving my truck in the snow.
Title: Re: What did you do to or on your CVO today?
Post by: extreme47 on December 19, 2013, 09:37:19 PM
09 ultraclassic FLHTCUSE4 
Installed Kuryakyn adjustable foot pegs for passenger
Installed Kuryakyn Tour tech highway pegs Adjustable
Title: Re: What did you do to or on your CVO today?
Post by: YELLOWBIRD on December 19, 2013, 11:10:13 PM
Rode my scoot all day!

Early this week, I finished up a couple winter projects. Added some new handlebars and some Heat Demons hand warmers. I wanted to keep use the stock clutch & brake cables. Added some color to the handlebars and have never seen any "YELLOW" Road Glides (or any other scooter) with this set up.

This fall I added some Daymakers LED's, CD Ringz, Fullsac Sleeper Stage II kit. That's it for this Winter.

I shoulda have gave my scoot a bath, but it was too nice a day and just wanted to ride.


I'm pretty stoked with the outcome!    :bananarock: :bananarock:

YB

(http://i1076.photobucket.com/albums/w457/09YELLOWBIRD/20131218_145106_zpse79fce91.jpg) (http://s1076.photobucket.com/user/09YELLOWBIRD/media/20131218_145106_zpse79fce91.jpg.html)

(http://i1076.photobucket.com/albums/w457/09YELLOWBIRD/20131218_145126_zps34f7a48a.jpg) (http://s1076.photobucket.com/user/09YELLOWBIRD/media/20131218_145126_zps34f7a48a.jpg.html)

(http://i1076.photobucket.com/albums/w457/09YELLOWBIRD/20131218_145156_zps06f3b5f2.jpg) (http://s1076.photobucket.com/user/09YELLOWBIRD/media/20131218_145156_zps06f3b5f2.jpg.html)

(http://i1076.photobucket.com/albums/w457/09YELLOWBIRD/20131218_1428262_zps0cac4791.jpg) (http://s1076.photobucket.com/user/09YELLOWBIRD/media/20131218_1428262_zps0cac4791.jpg.html)



Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on December 20, 2013, 08:08:47 AM
Rode my scoot all day!

Early this week, I finished up a couple winter projects. Added some new handlebars and some Heat Demons hand warmers. I wanted to keep use the stock clutch & brake cables. Added some color to the handlebars and have never seen any "YELLOW" Road Glides (or any other scooter) with this set up.

This fall I added some Daymakers LED's, CD Ringz, Fullsac Sleeper Stage II kit. That's it for this Winter.

I shoulda have gave my scoot a bath, but it was too nice a day and just wanted to ride.

I'm pretty stoked with the outcome!  


Lookin good.  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on December 20, 2013, 08:35:20 AM
Not seen yellow handlebars, they look good.
Title: Re: What did you do to or on your CVO today?
Post by: BryantH on December 20, 2013, 11:03:00 AM

Really nic job on the Yellow Bird.............
Title: Re: What did you do to or on your CVO today?
Post by: CVO Aqua-Glider on December 20, 2013, 01:54:11 PM
Man, do I love that yellow bike. :)  Nice job!
Title: Re: What did you do to or on your CVO today?
Post by: 2k on December 20, 2013, 03:27:00 PM
Really nic job on the Yellow Bird.............

WoW!!! Those bars are the chit. Did you have them powder coated?
Title: Re: What did you do to or on your CVO today?
Post by: AMEDD_SFC on December 20, 2013, 03:47:26 PM
Sweet!

Bet lowers like these would go pretty nice with that setup.  http://www.cvoharley.com/smf/index.php?topic=86264.0 (http://www.cvoharley.com/smf/index.php?topic=86264.0)

What do you think about switching the position of the yellow and black so the black is on the bottom?

Cheers 

Mark  :cowboy:
Title: Re: What did you do to or on your CVO today?
Post by: cambo on December 20, 2013, 06:07:27 PM
Beautiful bike!
Title: Re: What did you do to or on your CVO today?
Post by: YELLOWBIRD on December 21, 2013, 09:54:37 AM
THANKS for all the kind words.

The bars give my scoot a whole different feel and look. Kinda a "stock custom"  is what I call it, not as slick crazy as many of the badazz bikes on this forum!

To answer some of the questions, I wanted to go powder coating but could not get the right color or pearl. So I had to get them painted to match. I thought about painting (still might, but in NO hurry either way) my lower fairings but I kinda like the slant color separation of the gray and pearl yellow.

Happy holidays,

YB
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on December 21, 2013, 11:23:14 AM
Had the time this morning so I installed my new shift linkage.
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on December 21, 2013, 11:40:54 AM
Had the time this morning so I installed my new shift linkage.

That linkage looks really sharp!
Title: Re: What did you do to or on your CVO today?
Post by: krypto2011 on December 21, 2013, 12:10:24 PM
Just installed the Custom Dynamics brake light flasher module. Local LEO's may not like the strobe option, but I sure do!!! :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on December 21, 2013, 03:32:16 PM
Just installed the Custom Dynamics brake light flasher module. Local LEO's may not like the strobe option, but I sure do!!! :2vrolijk_21:

Me too, added LED's all around, love the position 6 strobe, really lights up the rear when you hit the brake.  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on December 21, 2013, 03:35:40 PM
THANKS for all the kind words.

The bars give my scoot a whole different feel and look. Kinda a "stock custom"  is what I call it, not as slick crazy as many of the badazz bikes on this forum!

To answer some of the questions, I wanted to go powder coating but could not get the right color or pearl. So I had to get them painted to match. I thought about painting (still might, but in NO hurry either way) my lower fairings but I kinda like the slant color separation of the gray and pearl yellow.

Happy holidays,

YB
I like the way the lowers look right now IMO
Title: Re: What did you do to or on your CVO today?
Post by: brwk on December 21, 2013, 07:10:51 PM
What did I do on my CVO today....I rode on salty roads BUT it was 65degs in Maryland!!!!!!  I just had to.  ;D
Title: Re: What did you do to or on your CVO today?
Post by: Pete7539 on December 21, 2013, 08:05:37 PM
Just installed the Custom Dynamics brake light flasher module. Local LEO's may not like the strobe option, but I sure do!!! :2vrolijk_21:

I have yet to come across one that doesn't. Riders or not, they know the disadvantage of being on a bike. The fact that this draws more attention to the distracted masses is a good thing. An accident for us is also a bad day for them. Especially if it involves a road closure and measurements. The only type of LEO I could see having an issue with this is an uneducated non-rider that's fresh out of the academy and looking to pad his activity sheet.
Title: Re: What did you do to or on your CVO today?
Post by: dayne66 on December 21, 2013, 09:07:24 PM
I have yet to come across one that doesn't. Riders or not, they know the disadvantage of being on a bike. The fact that this draws more attention to the distracted masses is a good thing. An accident for us is also a bad day for them. Especially if it involves a road closure and measurements. The only type of LEO I could see having an issue with this is an uneducated non-rider that's fresh out of the academy and looking to pad his activity sheet.
That's what I'm hopin'...as I'm puttin' them on this winter.
Title: Re: What did you do to or on your CVO today?
Post by: Gettinold on December 22, 2013, 06:34:21 AM
Saturday was a beautiful 80 degree day so I decided to get the VRod out and go see a friend for a while about 25miles away. Was there about 1 1/2 hrs and decide to head back home playing around some back roads on the way. Nothing but pure adrenalin when it's you and a back road.
Back roads don't last long around here so I was heading for the stable when about a mile away a little old lady turned left in front of me at about 30 mph. Not sure why she didn't see as she was looking right at me but I just swerved hard right onto the apex of where she was turning and MISSED her. Of all the years I've rode that was the closest I've come to contact with a vehicle!
For once I didn't even get pissed as I was so happy I didn't get hit by her. Thought about turning around and going and thank her missing me.
I truly think she never knew what she had had almost done and felt shes the one that may need help. A lady behind me stopped next me up the road at a traffic light and was just in awe and was and couldn't believe what she just witnessed. Told her that's the only Christmas present I want this year and merry Christmas to her.  Ride Safe! :pumpkin:
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on December 22, 2013, 07:46:20 AM
Saturday was a beautiful 80 degree day so I decided to get the VRod out and go see a friend for a while about 25miles away. Was there about 1 1/2 hrs and decide to head back home playing around some back roads on the way. Nothing but pure adrenalin when it's you and a back road.
Back roads don't last long around here so I was heading for the stable when about a mile away a little old lady turned left in front of me at about 30 mph. Not sure why she didn't see as she was looking right at me but I just swerved hard right onto the apex of where she was turning and MISSED her. Of all the years I've rode that was the closest I've come to contact with a vehicle!
For once I didn't even get pissed as I was so happy I didn't get hit by her. Thought about turning around and going and thank her missing me.
I truly think she never knew what she had had almost done and felt shes the one that may need help. A lady behind me stopped next me up the road at a traffic light and was just in awe and was and couldn't believe what she just witnessed. Told her that's the only Christmas present I want this year and merry Christmas to her.  Ride Safe! :pumpkin:

Glad your safe, Merry Christmas to you.  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: 05Train on December 22, 2013, 08:07:36 AM
What did I do on my CVO today....I rode on salty roads BUT it was 65degs in Maryland!!!!!!  I just had to.  ;D
Yup. 

First ride after the hand surgery, everything still works, nothing hurt.  Smoked a stogie waiting for it to cool off, then washed all the crud off of it.
Title: Re: What did you do to or on your CVO today?
Post by: backroad Mike on December 22, 2013, 10:07:45 AM
Yup. 

First ride after the hand surgery, everything still works, nothing hurt.  Smoked a stogie waiting for it to cool off, then washed all the crud off of it.

 :2vrolijk_21:  Good to hear Russ.

Patti and I rode about 150 miles yesterday.  Roads were dry and surprisingly free of sand. 
Title: Re: What did you do to or on your CVO today?
Post by: cambo on December 22, 2013, 11:47:30 AM
Rode over to the dealership to have the gas tank swapped out under warranty (Thank you HD) and spent the rest of the day enjoying the 60+ degree weather!!

(http://farm8.staticflickr.com/7320/11498328526_3457fff117_c.jpg) (http://www.flickr.com/photos/33856264@N03/11498328526/)

Cam
Title: Re: What did you do to or on your CVO today?
Post by: SBB on December 22, 2013, 12:17:48 PM
Rode over to the dealership to have the gas tank swapped out under warranty (Thank you HD) and spent the rest of the day enjoying the 60+ degree weather!!

(http://farm8.staticflickr.com/7320/11498328526_3457fff117_c.jpg) (http://www.flickr.com/photos/33856264@N03/11498328526/)

Cam


What a beautiful bike.
Maybe in a few years Cam will be ready for a new one and I could get his.

 :nixweiss: :nixweiss: :nixweiss: :nixweiss:


SBB


Title: Re: What did you do to or on your CVO today?
Post by: dahsen on December 22, 2013, 12:41:23 PM
Another snow storm today, so I had a little time to add a little chrome to the bike.

Installed a tool storage tube that will hold everything needed to help others...


 :)
Title: Re: What did you do to or on your CVO today?
Post by: 110tHunDer on December 22, 2013, 01:29:05 PM
 
That is a really good-looking Breakout! :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on December 22, 2013, 01:33:06 PM
Another snow storm today, so I had a little time to add a little chrome to the bike.

Installed a tool storage tube that will hold everything needed to help others...


 :)
Ok, I give... what is it that will help others. :nixweiss:

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on December 22, 2013, 01:34:57 PM

That is a really good-looking Breakout! :2vrolijk_21:

X2, yea it is. :2vrolijk_21: Is that your bike behind it??... You sneak down to Va yesterday to take advantage of our 60+ degree temps? :D :D

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: dahsen on December 22, 2013, 01:47:39 PM
Ok, I give... what is it that will help others. :nixweiss:


Metric tools...    :P

You will find a picture of what I carry with my Rocker C here:  http://www.cvoharley.com/smf/index.php?topic=89652.msg1186654#msg1186654


dah
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on December 22, 2013, 01:52:17 PM
Metric tools...    :P

You will find a picture of what I carry with my Rocker C here:  http://www.cvoharley.com/smf/index.php?topic=89652.msg1186654#msg1186654


dah
Ok, gotcha. :2vrolijk_21:

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: cambo on December 22, 2013, 02:18:15 PM

What a beautiful bike.
Maybe in a few years Cam will be ready for a new one and I could get his.

 :nixweiss: :nixweiss: :nixweiss: :nixweiss:


SBB




Thanks guys.

Chip,

if I ever decide to sell this bike, you will have the right of first refusal.

Cam
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on December 22, 2013, 07:55:03 PM

That is a really good-looking Breakout! :2vrolijk_21:


That's for sure  :2vrolijk_21:  And that front fairing came out excellent !!
Great job Cam!
Title: Re: What did you do to or on your CVO today?
Post by: 05Train on December 22, 2013, 08:14:52 PM
:2vrolijk_21:  Good to hear Russ.

Patti and I rode about 150 miles yesterday.  Roads were dry and surprisingly free of sand.
Thanks Mike.  The local roads weren't treated, but the major ones are just covered in white gook.   


Sent from my iPad, probably while I'm pooping.
Title: Re: What did you do to or on your CVO today?
Post by: cambo on December 22, 2013, 09:51:44 PM
That's for sure  :2vrolijk_21:  And that front fairing came out excellent !!
Great job Cam!

Thanks! Joe Z at Xtreme Dimension did a great job with the paint! He matched the paint scheme without every seeing a Breakout up close.

Cam
Title: Re: What did you do to or on your CVO today?
Post by: 2k on December 23, 2013, 11:53:24 AM
Joe at Xtreme had his gun loaded, just couldn't find a tourpak on FleaBay that met my standards. 5 minutes and it becomes a 2-up.

Title: Re: What did you do to or on your CVO today?
Post by: 2k on December 23, 2013, 11:54:39 AM
#2
Title: Re: What did you do to or on your CVO today?
Post by: cambo on December 23, 2013, 12:09:30 PM
Joe at Extreme had his gun loaded, just couldn't find a tourpak on FleaBay that met my standards. 5 minutes and it becomes a 2-up.


That's a sweet ride, Jimmy. My buddy has the same bike/color. The paint job looks even more amazing live! I'll have to pass along your mod to him since he traded in his CVO Road Glide Ultra for this bike and his wife isn't exactly happy to have given up her comfy seat.

Cam
Title: Re: What did you do to or on your CVO today?
Post by: dahsen on December 23, 2013, 01:29:30 PM
That's a sweet ride, Jimmy. My buddy has the same bike/color. The paint job looks even more amazing live!

X2

One of my favorite!  My dealer has one in stock.  Everytime I go there, I first go see that amazing paint job.  I would have bought it but my wife insists that I don't deserve a tour pack yet  ???

Question:  can you ride in heavy rain with those speakers?

Dah
Title: Re: What did you do to or on your CVO today?
Post by: 2k on December 23, 2013, 04:27:29 PM
Haven't yet, Dah. Have heard both sides....if its luck of the draw, mine will leak   :sweatdrop:
Title: Re: What did you do to or on your CVO today?
Post by: T-Roy on December 23, 2013, 05:17:13 PM
Hey 2k thanks for posting the picture of your tour pak. That is the first picture I have seen of one in our color. Joe Z is painting my swinebox now. Every morning I check to see if there are pictures of it posted on here yet. I swear I am like a darn 6 year old on Christmas!! LOL
Title: Re: What did you do to or on your CVO today?
Post by: 2k on December 23, 2013, 09:19:52 PM
Heck yeah, I was the same. Was gonna get Joe to paint me one, couldn't find a doner & couldn't wait any longer. Set up for solo in the pic, but got both racks. 4 bolts & 5 mins and its 2-up. Only drawback is no lights, haven't figured out a super clean way to make a detach harness. Rainy/cold day project # 319.
Title: Re: What did you do to or on your CVO today?
Post by: 1sharprdkg on December 23, 2013, 10:35:36 PM
#2
I dub that a Roadking Ultra Classic! Jimmy, that looks awesum buddy. I loved that Blue when I saw my first one at Smoky Mountain HD. You did good.
Title: Re: What did you do to or on your CVO today?
Post by: HRider on December 24, 2013, 08:22:36 PM
installed my D&D exhaust yesterday, rode it for a few miles today just to get a feel of it.

 (http://i538.photobucket.com/albums/ff346/grcplaya/20131223_212615_zpsijyjdqro.jpg) (http://s538.photobucket.com/user/grcplaya/media/20131223_212615_zpsijyjdqro.jpg.html)
(http://i538.photobucket.com/albums/ff346/grcplaya/20131223_212702_zpszduu6ub8.jpg) (http://s538.photobucket.com/user/grcplaya/media/20131223_212702_zpszduu6ub8.jpg.html)
Title: Re: What did you do to or on your CVO today?
Post by: 2k on December 24, 2013, 09:01:19 PM
Notice any increase in the butt dyno? Ghost pipe?? I am absolutly in love with that painted bucket!!!!
Title: Re: What did you do to or on your CVO today?
Post by: HRider on December 24, 2013, 09:48:04 PM
Notice any increase in the butt dyno? Ghost pipe?? I am absolutly in love with that painted bucket!!!!
I'll tell you this it definitely woke up the motor. I just received my TTs tuner today(haven't installed it yet) so I will work on it this weekend.  I let my boss ride it today for quick spin he said it definitely set him back in the seat, he's at least 300lb.
(http://i538.photobucket.com/albums/ff346/grcplaya/20131223_212528_zpsj7ysjrnj.jpg) (http://s538.photobucket.com/user/grcplaya/media/20131223_212528_zpsj7ysjrnj.jpg.html)
Title: Re: What did you do to or on your CVO today?
Post by: 05Train on December 24, 2013, 10:33:08 PM
Installed these (http://www.cvoharley.com/smf/index.php?topic=91057.0).
Title: Re: What did you do to or on your CVO today?
Post by: 2k on December 25, 2013, 01:16:14 PM
Had to cover that fuggly lock!
Title: Re: What did you do to or on your CVO today?
Post by: 2k on December 25, 2013, 01:17:30 PM
Pretty close match, yah!
Title: Re: What did you do to or on your CVO today?
Post by: CVO Aqua-Glider on December 25, 2013, 01:25:59 PM
Sweet clock 2K. :)
Title: Re: What did you do to or on your CVO today?
Post by: dayne66 on December 25, 2013, 01:40:10 PM
Pretty close match, yah!
Looks great!...and ,yes, that's a close match!
Title: Re: What did you do to or on your CVO today?
Post by: BUCKNUT GREG on December 25, 2013, 06:14:30 PM
It's like your avatar .... frustrating.

Spill the beans Jimmy
Title: Re: What did you do to or on your CVO today?
Post by: T-Roy on December 25, 2013, 09:22:23 PM
Hey 2k I looked at those clocks a while back but when I did I did not realize they were such a close match to the speedometer!! Did you get the one that swivels or the one that flips open? If you would not mind could you take a picture of it in the open position? Thanks.
Title: Re: What did you do to or on your CVO today?
Post by: 2k on December 25, 2013, 09:48:03 PM
Hey 2k I looked at those clocks a while back but when I did I did not realize they were such a close match to the speedometer!! Did you get the one that swivels or the one that flips open? If you would not mind could you take a picture of it in the open position? Thanks.
I went with the one that swivels only cause it was 25 bucks cheaper. Hey, it stays closed 99.9% of the time. Will get you a pic 2morrow.
Title: Re: What did you do to or on your CVO today?
Post by: 2k on December 26, 2013, 01:03:05 PM
For T-Roy, Have to be slow and careful locking/unlocking...but then, you don't do it often. Flip up would prob be easier.
Title: Re: What did you do to or on your CVO today?
Post by: T-Roy on December 26, 2013, 01:11:16 PM
Thanks 2k. Actually I found a picture of the flip one in the open position on their website and since it flips up toward you you would have to put the key behind it. I really think the key acces would be easier with the swivel style like yours. Thanks for the picture but DAD GUMMIT now I have another mod on the wishlist it just never ends LMAO ;)
Title: Re: What did you do to or on your CVO today?
Post by: greglyon on December 26, 2013, 10:27:21 PM
Added a Kisan Tech headlight modulator in a flhrse5.  Took 20 minutes.  This is the third bike that has used their product.
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on December 26, 2013, 10:48:34 PM
Changed out stock lights on front and back of bike.

http://www.cvoharley.com/smf/index.php?topic=73683.msg1201852#msg1201852 (http://www.cvoharley.com/smf/index.php?topic=73683.msg1201852#msg1201852)
Title: Re: What did you do to or on your CVO today?
Post by: 2k on December 27, 2013, 08:09:48 AM
Added a Kisan Tech headlight modulator in a flhrse5.  Took 20 minutes.  This is the third bike that has used their product.

Had to look it up. Is it legal in all states? How much?

http://www.youtube.com/watch?v=kCe4sq8Uc4Y&list=PL7272qWysA9x0zWDQ6niWiJXTkYW0km2O
Title: Re: What did you do to or on your CVO today?
Post by: greglyon on December 27, 2013, 09:59:59 AM
Had to look it up. Is it legal in all states? How much?

http://www.youtube.com/watch?v=kCe4sq8Uc4Y&list=PL7272qWysA9x0zWDQ6niWiJXTkYW0km2O

They are legal in all 50 states so long as the flashing is disabled at dusk.  Unit comes with a light sensor.
Price depends on model.  Here is their link.
http://kisantech.com/mag/index.php/pathblazer.html?p=1

 
Title: Re: What did you do to or on your CVO today?
Post by: spada84 on December 27, 2013, 10:11:32 AM
Had to look it up. Is it legal in all states? How much?

http://www.youtube.com/watch?v=kCe4sq8Uc4Y&list=PL7272qWysA9x0zWDQ6niWiJXTkYW0km2O

This is going to open a can of worms (Oil Thread?).  I have a strong resistance to headlight modulators.  Have heard of too many instances when a driver, at a quick glance, thought the rider was flashing to say "go ahead".

Can have the same effect with flashing rear lights.  I have a Bright Ass Light on the "flash 5 fast one time" setting. But, I was behind a GW withing blinking rear lights and integrated turn signal/brake lights.  Couldn't tell what the heck he was going to do when he had on both brakes and turn. 
Title: Re: What did you do to or on your CVO today?
Post by: Bigfoot16 on December 27, 2013, 10:58:13 AM
Gave mine a another cleaning and shining,, hoping it hits 50 degrees tomorrow so I can go for a ride...
Title: Re: What did you do to or on your CVO today?
Post by: CVO Aqua-Glider on December 27, 2013, 01:32:30 PM
Gave mine a another cleaning and shining,, hoping it hits 50 degrees tomorrow so I can go for a ride...

It's been hitting 50+ here in St. Louis, but they just sprayed the chemicals all over the roads in case it snowed. Ughhhhh!!!  I may ride tomorrow anyway, but man do I hate that crap on the roads.
Title: Re: What did you do to or on your CVO today?
Post by: Bigfoot16 on December 27, 2013, 02:29:28 PM
It's been hitting 50+ here in St. Louis, but they just sprayed the chemicals all over the roads in case it snowed. Ughhhhh!!!  I may ride tomorrow anyway, but man do I hate that crap on the roads.

You are just down I64 from me, so hopefully that warmer air makes it my way.  I agree, the junk on the road is not cool at all.  How is that new bike doing?  It sure is pretty...
Title: Re: What did you do to or on your CVO today?
Post by: CVO Aqua-Glider on December 27, 2013, 02:37:49 PM
You are just down I64 from me, so hopefully that warmer air makes it my way.  I agree, the junk on the road is not cool at all.  How is that new bike doing?  It sure is pretty...

Thanks, I LOVE the bike. I just need the infotainment gremlins to be fixed is all. :) I'll send some hot air up your way. :)
Title: Re: What did you do to or on your CVO today?
Post by: Bigfoot16 on December 27, 2013, 02:59:28 PM
Thanks, I LOVE the bike. I just need the infotainment gremlins to be fixed is all. :) I'll send some hot air up your way. :)

Groovy :)  Thanks
Title: Re: What did you do to or on your CVO today?
Post by: Billy on December 28, 2013, 04:59:07 PM
installed tour pak lid organizer  Billy
Title: Re: What did you do to or on your CVO today?
Post by: CVO Aqua-Glider on December 28, 2013, 05:17:58 PM
Took her for a ride today as it was close to 60 degrees today in St. Louis. :) Unfortunately, upon return I noticed a small dime size drop of coolant on my garage floor, so looks like I'm suffering the thermostat leak issue. Can't tell because the CVO has the cover over the pump and thermostat. I tried to take it off, but I'm not sure how. Anyone know how to take the cover off to see the pump and thermostat?
Title: Re: What did you do to or on your CVO today?
Post by: Mount'nman on December 28, 2013, 06:25:14 PM
Rode 150 miles today of that 35 miles was up at 8000-9000 ft.  Ice, snow and 34 deg.  had to go slow but was nice at the lower elevations.  Colorado is the best!
Title: Re: What did you do to or on your CVO today?
Post by: denis on December 28, 2013, 09:13:41 PM
started mine today for about 15min shut it off and coolent leaking again this is the 3rd thermostat also front speaker issues dealer on phone say fuller neck needs replacement have a recall in the mail from harley dealer will pick bike up
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on December 28, 2013, 09:52:13 PM
My heart goes out to you guys with the new design, I hope HD gets these issues fixed quickly for all of the various faults.  :(
Title: Re: What did you do to or on your CVO today?
Post by: knothead on December 29, 2013, 07:14:12 PM
 Finished installing the Legend air shocks  I bought her for our 5 year anniversery and rode down to Galveston...just say'n
Title: Re: What did you do to or on your CVO today?
Post by: Eagle Eye on December 29, 2013, 09:17:55 PM
Rode to four shops/stores looking for a communications cable for the comm unit.  Ended up buying a new HD communications unit, but the intercom is still not working right.  (Posted in the appropriate string.)

Still, it was a beautiful 65 dg day for riding here in San Jose, CA.  NICE!!!!  :coolblue:
Title: Re: What did you do to or on your CVO today?
Post by: Hx2 on December 29, 2013, 11:56:42 PM
Saw mine for the first time in seven weeks.  :-*
Title: Re: What did you do to or on your CVO today?
Post by: TC44 on January 01, 2014, 10:00:07 PM
Installed my fullsac 1.75" baffles in stock CVO cans. I left the packing and wire cage like stuff in.  I started it in the garage and it sounded great.  Terrible weather expected for the next few days but I will take it out for at least a test ride ASAP!!

Happy 2014 guys!
Title: Re: What did you do to or on your CVO today?
Post by: Para Bellum on January 01, 2014, 10:45:09 PM
GF and I rode with 14 other bikes in our annual New Year's Day Stiff Nipple Ride; about 90 miles in foggy but dry 30* weather.  Went to Yeasty Beasty Pizza.
Title: Re: What did you do to or on your CVO today?
Post by: CVO Aqua-Glider on January 02, 2014, 08:55:44 AM
"Yeasty Beasty?"  Strange name....Kindy catchy yet off putting at the same time.  :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: dlaws01 on January 02, 2014, 11:46:23 AM
"Yeasty Beasty" ?  Tell her they sell some medicine for that at Walgreen's.   :oops:
Title: Re: What did you do to or on your CVO today?
Post by: CVO Aqua-Glider on January 02, 2014, 02:05:51 PM
"Yeasty Beasty" ?  Tell her they sell some medicine for that at Walgreen's.   :oops:

Exactly, you said it better than I. :)
Title: Re: What did you do to or on your CVO today?
Post by: 1sharprdkg on January 02, 2014, 10:35:35 PM
Exactly, you said it better than I. :)
Aqua Glider great pic of your bike...Blue really pops!!! :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: 110tHunDer on January 02, 2014, 10:39:13 PM
 
Yep!  Orange and black might be Harley colors, but there's just something about blue motorcycles.  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: CVO Aqua-Glider on January 03, 2014, 08:41:59 AM

Yep!  Orange and black might be Harley colors, but there's just something about blue motorcycles.  :2vrolijk_21:

Aqua Glider great pic of your bike...Blue really pops!!! :2vrolijk_21:

Thanks, yes I LOVE the blue when it's in direct sunlight.  :bananarock:
Title: Re: What did you do to or on your CVO today?
Post by: Rooster on January 03, 2014, 09:34:17 AM
I like the blue :drink:
Title: Re: What did you do to or on your CVO today?
Post by: cambo on January 03, 2014, 10:18:21 AM
GF and I rode with 14 other bikes in our annual New Year's Day Stiff Nipple Ride; about 90 miles in foggy but dry 30* weather.  Went to Yeasty Beasty Pizza.

Two phrases I HAVE to find a reason to use in casual conversation!

Cam
Title: Re: What did you do to or on your CVO today?
Post by: 2k on January 04, 2014, 07:43:01 AM
(http://www.cvoharley.com/smf/index.php?action=dlattach;topic=89705.0;attach=254026;image)

Its the little personal things that count( I didn't say cheap), gonna make it stand out in a crowd!! GREAT Mod.
Title: Re: What did you do to or on your CVO today?
Post by: CVO Aqua-Glider on January 04, 2014, 11:52:38 AM
Nice job on the blue RK.  Man that thing is beautiful. 
Title: Re: What did you do to or on your CVO today?
Post by: Blueprint on January 04, 2014, 06:03:14 PM
Ordered 2" fullsac baffles. Ordered new cable for TTS.  Trying to make decision on which headder to order.  Leaning toward the sport pipe conversion and putting the savings toward something for the BSR.   
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on January 04, 2014, 07:20:05 PM
(http://www.cvoharley.com/smf/index.php?action=dlattach;topic=89705.0;attach=254026;image)

Its the little personal things that count( I didn't say cheap), gonna make it stand out in a crowd!! GREAT Mod.

Worth every penny, looks awesome.
Title: Re: What did you do to or on your CVO today?
Post by: Supershooter on January 04, 2014, 09:39:08 PM
Bought bushings for the handlebar job I'm ready to start, if everything goes well hope to start tomorrow.
Supershooter
Title: Re: What did you do to or on your CVO today?
Post by: JP Indy Hog on January 04, 2014, 10:50:14 PM
Speaking of blue, lookie what the FedEx man brought today; a package from Joe Z up at Xtreme Dimension!

Sapphire Blue, color-matched replacements for the stock heat deflectors & docking mount w/caps as well as a color-matched Jaffe Stealth license plate frame.

Guess I know what I'll be doing this afternoon or tomorrow morning!
Hi FXD_TG : Your paint projects look great.  Could you give the contact information for the painter? I would like to have my four point docking brackets painted to match my 2013 Burgundy Blaze CVO RK. Thanks for any help! Best Regards: JP
Title: Re: What did you do to or on your CVO today?
Post by: deldago on January 04, 2014, 11:06:01 PM
Hi FXD_TG : Your paint projects look great.  Could you give the contact information for the painter? I would like to have my four point docking brackets painted to match my 2013 Burgundy Blaze CVO RK. Thanks for any help! Best Regards: JP
Check this thread, a very talented painter that does a lot of work for members here.http://www.cvoharley.com/smf/index.php?topic=85822.0
Title: Re: What did you do to or on your CVO today?
Post by: Rooster on January 05, 2014, 11:23:40 AM
Mo Blue is Mo better :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: 2k on January 05, 2014, 01:26:59 PM
Got a set of the 'Blue Lights' like SBB had, on order. So I can play with these without risk. Used some of the Lowes Cobalt Blue Metallic as suggested by wizgee. Looks better than the pic as the flash shows 'Flaws' that are not really there. What do you think?
Title: Re: What did you do to or on your CVO today?
Post by: JP Indy Hog on January 05, 2014, 02:18:50 PM
Joe Zett, he's a CVO forum / vendor member
Screen name is Xtreme Dimension

Business is also Xtreme Dimension up in New Jersey
Phone: (856) 740-5020


OK, Thanks! Should I buy the Black Docking parts, instead of the Chrome ones? JP
Title: Re: What did you do to or on your CVO today?
Post by: deldago on January 05, 2014, 02:47:37 PM
OK, Thanks! Should I buy the Black Docking parts, instead of the Chrome ones? JP
Black,easier to get paint to stick to than chrome.
Title: Re: What did you do to or on your CVO today?
Post by: JP Indy Hog on January 05, 2014, 06:43:47 PM
Yes, if you plan to have them painted you'd want to go with the black as I believe they are easier / take less time to media blast vs. the chrome.

Joe will confirm if you give him a call to discuss, which I recommend before doing anything else.
OK, will do. Again Thanks to all for the replies. Regards: JP
Title: Re: What did you do to or on your CVO today?
Post by: Supershooter on January 05, 2014, 09:30:43 PM
Washed and started the dismantle to replace handlebar riser bushings and add 16 in Cyclesmith apes to my Ultra. Cold outside warm I the shop.
Supershooter
Title: Re: What did you do to or on your CVO today?
Post by: Hx2 on January 05, 2014, 09:50:22 PM
Spur of the minute 100 mile ride down to St Augustine for the lights and pizza. Perfect evening for a nice ride.
Title: Re: What did you do to or on your CVO today?
Post by: spada84 on January 05, 2014, 10:07:22 PM
Mounted a new Metzler 888 front tire. 
Title: Re: What did you do to or on your CVO today?
Post by: danner55 on January 06, 2014, 05:25:12 AM
Cleaned the bugs off my bike after January afternoon ride! :orange: :orange:
Title: Re: What did you do to or on your CVO today?
Post by: Rooster on January 06, 2014, 10:20:21 AM
Got a set of the 'Blue Lights' like SBB had, on order. So I can play with these without risk. Used some of the Lowes Cobalt Blue Metallic as suggested by wizgee. Looks better than the pic as the flash shows 'Flaws' that are not really there. What do you think?
How could you go wrong with more BLUE :smilie_eimer:
Title: Re: What did you do to or on your CVO today?
Post by: Teemo Supremo on January 10, 2014, 02:21:05 PM
I added quick detach tour pack kit this week:-)
Title: Re: What did you do to or on your CVO today?
Post by: 2k on January 10, 2014, 03:35:18 PM
I added quick detach tour pack kit this week:-)
Just incase you have forgotten the #1 rule in posting................

 :worthless:
Title: Re: What did you do to or on your CVO today?
Post by: Dobeman2000 on January 10, 2014, 03:48:24 PM
All you lucky people in the south.  I haven't even looked at my bike for a month here in N. IL :-[

Cleaned the bugs off my bike after January afternoon ride! :orange: :orange:
Title: Re: What did you do to or on your CVO today?
Post by: danner55 on January 10, 2014, 03:59:57 PM
Dobeman2000,

I lived in North Central Illinois for 37 years!

I know how you feel!

 But not anymore! :orange: :orange:
Title: Re: What did you do to or on your CVO today?
Post by: Opossum on January 10, 2014, 05:34:46 PM
Fullsac DX w/2.0" baffles, Moto-Lights, pig tails for the Gerbing stuff, and a cig lighter on the dash!  Goin for Dyna Link tune on the Dyno tomorrow. Spossed to be in the 70's here Sunday.   :huepfenlol2:
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on January 10, 2014, 06:36:11 PM
Spossed to be in the 70's here Sunday.   :huepfenlol2:

Blah blah blah!!!!  :coolblue: J/K man enjoy! We hit 32 today which is a 70 degree swing from -43 on Monday!
Title: Re: What did you do to or on your CVO today?
Post by: FLHTCUSE7 on January 10, 2014, 10:23:35 PM
Lost a set of keys somewhere in my house. Gave up looking and $140 later I have a new set on the way.

Stupidity sucks
Title: Re: What did you do to or on your CVO today?
Post by: Blueprint on January 10, 2014, 10:51:01 PM
Installed fullsac baffles.  Much better sound....headder and tune next......
Title: Re: What did you do to or on your CVO today?
Post by: Opossum on January 11, 2014, 07:49:55 AM
Blah blah blah!!!!  :coolblue: J/K man enjoy! We hit 32 today which is a 70 degree swing from -43 on Monday!
OUCH! So do they call that a warming trend?  :D
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on January 11, 2014, 01:11:17 PM
Just checked the tire pressure, if everything lines up tomorrow, I might be able to get out for a couple hour ride.
Title: Re: What did you do to or on your CVO today?
Post by: CVO Aqua-Glider on January 11, 2014, 05:23:53 PM
Just checked the tire pressure, if everything lines up tomorrow, I might be able to get out for a couple hour ride.

I was tempted to ride today since we got all that rain to clean off the chemically treated roads. My fear is all the residual snow melting and the roads being wet in spots. As much as I'd like to ride, I'm not sure I want to have to clean afterwards. :) If you ride have fun and be safe.
Title: Re: What did you do to or on your CVO today?
Post by: Indenial on January 11, 2014, 05:42:02 PM
Now that duck hunting season is over. I am spending this weekend in my cave tearing my road glide down, almost to the frame, for it's annual cleaning and Glare application. Should take about 3-4 weekends. But I won't be riding for 3-4 months, so I can take my time.
Title: Re: What did you do to or on your CVO today?
Post by: CVO Aqua-Glider on January 11, 2014, 07:53:48 PM
Now that duck hunting season is over. I am spending this weekend in my cave tearing my road glide down, almost to the frame, for it's annual cleaning and Glare application. Should take about 3-4 weekends. But I won't be riding for 3-4 months, so I can take my time.
Wow, that's hard core.  What is "glare?"
Title: Re: What did you do to or on your CVO today?
Post by: Para Bellum on January 11, 2014, 08:07:03 PM
Wow, that's hard core.  What is "glare?"

Ruh-roh.  The dreaded "Glare" question.  Time to duck-and-cover.   ::)
Title: Re: What did you do to or on your CVO today?
Post by: Pete7539 on January 11, 2014, 08:07:23 PM
What is "glare?"

http://www.glare.com/ (http://www.glare.com/)
Title: Re: What did you do to or on your CVO today?
Post by: CVO Aqua-Glider on January 11, 2014, 08:14:22 PM
Ruh-roh.  The dreaded "Glare" question.  Time to duck-and-cover.   ::)

I was just curious what in hell requires tearing your bike down to the frame. I don't care what it is, no way I'm doing it. :)
Title: Re: What did you do to or on your CVO today?
Post by: Para Bellum on January 11, 2014, 08:24:54 PM
I was just curious what in hell requires tearing your bike down to the frame. I don't care what it is, no way I'm doing it. :)

Bad boy!  No Glare for you.   ;D
Title: Re: What did you do to or on your CVO today?
Post by: CVO Aqua-Glider on January 11, 2014, 08:43:38 PM
http://www.glare.com/ (http://www.glare.com/)

Thanks, I watched a few of the videos.  I could only stand listening to the Chemist / sales guy for 2 videos. Hilarious, he's talking about how you never want to rub/polish in a circular motion. Meanwhile, the whole time he's saying that the guy demonstrating the products is rubbing in circles. :)  I think I'll stick with my Opti-Seal.
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on January 11, 2014, 08:49:24 PM
I was just curious what in hell requires tearing your bike down to the frame. I don't care what it is, no way I'm doing it. :)
Time, tools, and knowledge... none of which I have. :D :D

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: deldago on January 11, 2014, 08:53:50 PM
Y'all had me before I read this on their website (creates a paint surface so smooth and slick that the Air-Drag coefficient of your vehicle will be significantly reduced, actually making your vehicle more aerodynamic.)!I guess that is why the blue ones are faster. :pepper:
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on January 11, 2014, 10:42:01 PM
Finished adding BSR add-ons:

1. Changed out footboard brackets and added highway peg brackets with matching pegs.
2. Added her water bottle holder.
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on January 11, 2014, 10:48:30 PM
3. Added her nick-nack pouch, actually holds peppermints for me  :P.

Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on January 11, 2014, 10:50:42 PM
4. Added Brukus boot shield on right footboard.


Then we took a short brisk 2 hour ride just to get out today.  :bananarock:


Title: Re: What did you do to or on your CVO today?
Post by: T-Roy on January 12, 2014, 12:03:14 AM
I got the swinebox that Joe Zett painted installed and got out today for a little riding.
Title: Re: What did you do to or on your CVO today?
Post by: T-Roy on January 12, 2014, 12:04:20 AM
Another Swinebox pic
Title: Re: What did you do to or on your CVO today?
Post by: T-Roy on January 12, 2014, 12:06:55 AM
One more
Title: Re: What did you do to or on your CVO today?
Post by: T-Roy on January 12, 2014, 12:08:16 AM
And the last one
Title: Re: What did you do to or on your CVO today?
Post by: BALIS on January 12, 2014, 03:26:09 AM
Good job.
Well done.
Title: Re: What did you do to or on your CVO today?
Post by: 2k on January 12, 2014, 06:26:53 AM
I love the way the box flows with the bags in the rear..........dad gum you T-Roy!!!!!
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on January 12, 2014, 07:30:25 AM
I love the way the box flows with the bags in the rear..........dad gum you T-Roy!!!!!

LOL, I see a mod coming soon for Jimmy.  :huepfenjump3:


Title: Re: What did you do to or on your CVO today?
Post by: Grizzly on January 12, 2014, 10:03:36 AM
Great looking custom ride you've created.

Correct me if I'm wrong, but does your BSR now ride in the lap of luxury with a heated backrest, no less?  That's over the top!  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: T-Roy on January 12, 2014, 10:32:23 AM
Yep grizzly a heated seat also. It probably is over the top considering I live in South Louisiana. However we do plan on coming to the mountains of NC and SD soon and you know what they say, if the BSR ain't happy nobody is. LOL I also have to admit I was late coming in last nigh and the temp had dropped into the 30's and that heated seat was nice :bananarock:
Title: Re: What did you do to or on your CVO today?
Post by: Foot Loose on January 12, 2014, 10:45:50 AM
I made a payment today.  Sucks to have payments and can't ride it! Bike has 2/10ths mile, and that aint from me...
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on January 12, 2014, 11:09:56 AM
I made a payment today.  Sucks to have payments and can't ride it! Bike has 2/10ths mile, and that aint from me...

That does suck, at least I was able to put 700 miles on mine new bike, before I covered it up for the winter.  I was hoping to get out today, but that is not going to happen.
Title: Re: What did you do to or on your CVO today?
Post by: Rooster on January 12, 2014, 12:29:40 PM
4. Added Brukus boot shield on right footboard.


Then we took a short brisk 2 hour ride just to get out today.  :bananarock:



Curious is that a deer whistle down low in front?
Title: Re: What did you do to or on your CVO today?
Post by: cambo on January 12, 2014, 03:02:20 PM
Pull the covers off and went for the first ride of the new year !  :2vrolijk_21:

(http://farm4.staticflickr.com/3723/11913993256_cf81fdc965_b.jpg) (http://www.flickr.com/photos/33856264@N03/11913993256/)
Title: Re: What did you do to or on your CVO today?
Post by: SBB on January 12, 2014, 03:24:13 PM
Pull the covers off and went for the first ride of the new year !  :2vrolijk_21:

(http://farm4.staticflickr.com/3723/11913993256_52d301fd26_z.jpg) (http://www.flickr.com/photos/33856264@N03/11913993256/)


Who is that bearded guy?

 :nixweiss:

SBB


Title: Re: What did you do to or on your CVO today?
Post by: cambo on January 12, 2014, 03:25:51 PM

Who is that bearded guy?

 :nixweiss:

SBB




:) Way too old to be me ! Looks a lot like my grandpa, though ! ;)
Title: Re: What did you do to or on your CVO today?
Post by: Para Bellum on January 12, 2014, 03:51:01 PM
Ordered a set of Wild Ones 502 12.5 apes for the SERGU.  Have WO bars on both the other CVOs.
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on January 12, 2014, 04:50:37 PM
Curious is that a deer whistle down low in front?

Yep sure is, not sure I'm satisfied with the current location though. I don't ride the backroads around here at night without it turned on. I've had one on the last five bikes I've owned and I believe in it although some do not. To each his own.  :bananarock:
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on January 12, 2014, 05:48:14 PM
Ordered a set of Wild Ones 502 12.5 apes for the SERGU. 
Thats what I have, love them!
Title: Re: What did you do to or on your CVO today?
Post by: Big Dog on January 12, 2014, 10:23:13 PM
Just finished up a few mods done by JARZ Performance, got bike back yesterday:
TW-7H cams, new bearings, Fueling lifters, SE push rods, Baker Attitude chain adjuster, Primo Rivera Pro Clutch, Zippers Red Shift chain tensioners, new chains, by pass valve, D&D Fat Cat 2:1 and ghost pipe, dyno tune, 106.50/118.15. All I can do is look at it right now, can't wait for the weather to smarten up!  
Title: Re: What did you do to or on your CVO today?
Post by: Bigfoot16 on January 12, 2014, 11:27:00 PM
Took the cover off, unhooked the battery tender and went for a zip. It was 53 degrees in southern Indiana today.  Much better than below zero a week ago. :)
Title: Re: What did you do to or on your CVO today?
Post by: SERK3 on January 13, 2014, 06:27:57 AM
walked by it and pat on the rear seat. and said soon baby soon :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: geezerglide on January 13, 2014, 01:42:17 PM
Just finished up a few mods done by JARZ Performance, got bike back yesterday:
TW-7H cams, new bearings, Fueling lifters, SE push rods, Baker Attitude chain adjuster, Primo Rivera Pro Clutch, Zippers Red Shift chain tensioners, new chains, by pass valve, D&D Fat Cat 2:1 and ghost pipe, dyno tune, 106.50/118.15. All I can do is look at it right now, can't wait for the weather to smarten up!  

Big Dog,

Your so lucky to have Lee in your backyard. I have to ride 1,000 kms (Calgary) one way for him to tune and dyno my bike properly.

geezerglide
Title: Re: What did you do to or on your CVO today?
Post by: owl893 on January 13, 2014, 01:51:51 PM
rode out to ONA, Florida, right next to BFE.  This thing is made of printing plates, BSR's had fun.

http://www.solomonscastle.com/castlehistory.htm

OWL
Title: Re: What did you do to or on your CVO today?
Post by: Big Dog on January 13, 2014, 10:24:46 PM
Big Dog,

''Your so lucky to have Lee in your backyard. I have to ride 1,000 kms (Calgary) one way for him to tune and dyno my bike properly.''

geezerglide

I know Geezer, I'm lucky to have talent like Lee and his crew just down the street. He had it picked up, torn down, built up, tuned to perfection and back home within the week. If you're ever up this way and need anything let me know. :2vrolijk_21:

Title: Re: What did you do to or on your CVO today?
Post by: Twism_23 on January 16, 2014, 12:38:47 PM
Installed an Dunlop Elite 3 250 rear tire and DK Custom coil relocation kit. Pulled off my Python Staggered exhaust in preparation to change my cams and exhaust next week.
Title: Re: What did you do to or on your CVO today?
Post by: timo482 on January 16, 2014, 05:07:48 PM
looked at my bike longingly..   10 degrees - 30 mph wind - blowing snow....

*sigh*

to
Title: Re: What did you do to or on your CVO today?
Post by: dahsen on January 16, 2014, 09:02:39 PM
Just sat on it to drink a cold beer while looking through the garage window...  Wondering if that thick layer of ice will ever melt to let the snow do the same... Still a long way to go...

.. Time for another beer...    :(
Title: Re: What did you do to or on your CVO today?
Post by: 05Train on January 16, 2014, 09:19:08 PM
Stripped a few parts for powder coating.
Title: Re: What did you do to or on your CVO today?
Post by: Supershooter on January 16, 2014, 10:37:07 PM
Tearing more parts off to get the new bars on, see pic
Supershooter
Title: Re: What did you do to or on your CVO today?
Post by: Bollocks on January 17, 2014, 06:16:15 PM
Ordered some sound improvements today: Jekill & Hyde exhaust system, ST 1 airfilter kit and the SE Super Tuner....
http://www.jekillandhyde.nl/promotion_video

Can't wait to have installation done....
Title: Re: What did you do to or on your CVO today?
Post by: 2k on January 18, 2014, 08:38:49 AM
Almost complete with passing lamp install, like many here have said "Should have been on a CVO from the factory"

Title: Re: What did you do to or on your CVO today?
Post by: 2k on January 18, 2014, 08:45:23 AM
Just can't say no to trinkets & bling. My Son says, "When you gonna install the curb feelers?"
Title: Re: What did you do to or on your CVO today?
Post by: cambo on January 18, 2014, 09:15:12 AM
Just can't say no to trinkets & bling. My Son says, "When you gonna install the curb feelers?"

Jimmy,

1- Love your bike! My favorite blue bike! That paint job is phenomenal.
2- Everything you have done to the bike makes it look even better.
3- And what's wrong with curb feelers???? :D

BTW, my buddy who owns the exact same bike (minus the bling) as yours called yesterday to see if I would help him out and let him leave his bike in our garage for the winter. I reluctantly ;) agreed and, being the dedicated, selfless friend that I am, promised him I will ride it frequently just to make sure the fuel doesn't go bad and the tires don't get flat spots. Hey what are friends for, right?  :bananarock:
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on January 18, 2014, 09:41:45 AM
Jimmy,

1- Love your bike! My favorite blue bike! That paint job is phenomenal.
2- Everything you have done to the bike makes it look even better.
3- And what's wrong with curb feelers???? :D

BTW, my buddy who owns the exact same bike (minus the bling) as yours called yesterday to see if I would help him out and let him leave his bike in our garage for the winter. I reluctantly ;) agreed and, being the dedicated, selfless friend that I am, promised him I will ride it frequently just to make sure the fuel doesn't go bad and the tires don't get flat spots. Hey what are friends for, right?  :bananarock:

I have room to store a few bikes, sounds like a good deal to offer some of my friends.
Title: Re: What did you do to or on your CVO today?
Post by: RoadMonkey on January 18, 2014, 12:57:26 PM
Almost complete with passing lamp install, like many here have said "Should have been on a CVO from the factory"



 :2vrolijk_21: Excellent! This is on my "to do" list
Title: Re: What did you do to or on your CVO today?
Post by: RoadMonkey on January 18, 2014, 01:01:06 PM
WO513 baby apes project is complete!
Title: Re: What did you do to or on your CVO today?
Post by: 05Train on January 18, 2014, 05:50:33 PM
Powder coated parts back.....Thinking I may just black out the bells and leave the lowers chrome.

(http://img.tapatalk.com/d/14/01/19/3a8u6ate.jpg)


(http://img.tapatalk.com/d/14/01/19/4unehage.jpg)

Sent from my iPad, probably while I'm pooping.
Title: Re: What did you do to or on your CVO today?
Post by: Billy on January 18, 2014, 06:57:01 PM
Powder coated parts back.....Thinking I may just black out the bells and leave the lowers chrome.

(http://img.tapatalk.com/d/14/01/19/3a8u6ate.jpg)


(http://img.tapatalk.com/d/14/01/19/4unehage.jpg)

Sent from my iPad, probably while I'm pooping.
           Where did  you get the wind deflectors for the forks? And how much better did it make the wind? Thanks Billy
Title: Re: What did you do to or on your CVO today?
Post by: 05Train on January 18, 2014, 07:07:18 PM
Got them from JES (http://www.jescustomaccents.com/product.sc?productId=196&categoryId=34).  Between them and the Madstad, I get zero buffeting. 


Sent from my iPad, probably while I'm pooping.
Title: Re: What did you do to or on your CVO today?
Post by: 2k on January 18, 2014, 07:23:16 PM
Powder coated parts back.....Thinking I may just black out the bells and leave the lowers chrome.

My thought exactly, the passing light housing's & lower legs. All else black.
Title: Re: What did you do to or on your CVO today?
Post by: 05Train on January 18, 2014, 07:38:05 PM
That's what I'm leaning towards....Contrast is good.

Besides, I already have one completely blacked-out bike and it'd cost a fortune to do the same to this one.

Edit - Holy crow Tapatalk made those pictures HUGE!
Title: Re: What did you do to or on your CVO today?
Post by: Billy on January 18, 2014, 08:11:36 PM
Got them from JES (http://www.jescustomaccents.com/product.sc?productId=196&categoryId=34).  Between them and the Madstad, I get zero buffeting. 


Sent from my iPad, probably while I'm pooping.
Thanks Billy
Title: Re: What did you do to or on your CVO today?
Post by: Para Bellum on January 19, 2014, 03:14:23 AM
Thats what I have, love them!

Can't wait to get them.  Have the WO575 on the '08 SEUC, which is OK, but need a little more height and pullback.  Do they give a little more "attitude" also?   8) 8)
Title: Re: What did you do to or on your CVO today?
Post by: popsracing on January 19, 2014, 11:01:43 AM
Installed HID headlights, a Boom Audio hidden antenna, Fulsac DX head pipe with 2" baffles and TTS tuner  :2vrolijk_21:....now its 15deg and snowing here...Uggg  :soapbox:...I wanna ride this thing...commoooon April!! 
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on January 19, 2014, 11:15:32 AM
Installed HID headlights, a Boom Audio hidden antenna, Fulsac DX head pipe with 2" baffles and TTS tuner  :2vrolijk_21:....now its 15deg and snowing here...Uggg  :soapbox:...I wanna ride this thing...commoooon April!! 
:worthless:
Title: Re: What did you do to or on your CVO today?
Post by: danner55 on January 19, 2014, 01:47:28 PM
Supershooter,

You sure are tearing off more parts off your bike,than I did to install my new 578's! :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: Supershooter on January 19, 2014, 11:00:02 PM
Danner 55,
No worries, the tear down is complete, replaced the risers tonight and removed the bars getting ready to extend wires and replace the brake line. This project has been getting more fun as I goes. I just hope 16 in Cyclesmiths were the right choice, I really like the look of Monkey bars better.
Supershooter
Title: Re: What did you do to or on your CVO today?
Post by: Blueprint on January 20, 2014, 04:48:32 PM
BSR wanted a little more room. What can I say but my baby got back......
Used 1/2" aluminum plate to move tour pack back 1 1/2".
Title: Re: What did you do to or on your CVO today?
Post by: 2k on January 20, 2014, 05:29:43 PM
BSR wanted a little more room. What can I say but my baby got back......
Used 1/2" aluminum plate to move tour pack back 1 1/2".

Good job! Prob saved some crunch over a Kury or G.A.
Title: Re: What did you do to or on your CVO today?
Post by: Supershooter on January 20, 2014, 10:06:35 PM
Danner55,
What didn't you take off that I have?
Supershooter
Title: Re: What did you do to or on your CVO today?
Post by: Blueprint on January 20, 2014, 10:22:40 PM
Didn't want to put DOD stickers on windshield---was not going to put them on fork tubes....
So unused highway peg mount and a piece of 1/2" aluminum bar stock....guess ill fine out in the morning if the Ft Hood gate guards inforce the location rules......
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on January 21, 2014, 08:01:56 AM
Didn't want to put DOD stickers on windshield---was not going to put them on fork tubes....
So unused highway peg mount and a piece of 1/2" aluminum bar stock....guess ill fine out in the morning if the Ft Hood gate guards inforce the location rules......

I've seen similar gadgets for mounting the DOD sticker, and your's looks good to go.   :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: cambo on January 21, 2014, 10:08:13 AM
Not on my CVO and not today, technically speaking. But yesterday it was sunny and dry with temps close to 50 degrees. So I volunteered to go get my buddy's 2013 CVO RK and bring it to our place for the next couple of months. Even though we live less than a mile apart, I took an alternate 'shortcut' which was closer to 20 miles to get back !

This bike (same as 2k's) looks 100x better in person. As amazing as the blue paint job is, it just does not photograph well. I took the picture below this past June the day he bought it and brought it home.

(http://farm4.staticflickr.com/3722/12069946553_564ca894af_c.jpg) (http://www.flickr.com/photos/33856264@N03/12069946553/)
Title: Re: What did you do to or on your CVO today?
Post by: owl893 on January 21, 2014, 10:42:14 AM
looks damn good to me.........

OWL
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on January 21, 2014, 10:51:45 AM
looks damn good to me.........

OWL

Same here.

I know what you mean, sometimes if you don't have the right light or camera the photos don't do justice.  I have tried and tried to capture a great picture of my orange Breakout, not satisfied yet.
Title: Re: What did you do to or on your CVO today?
Post by: danner55 on January 21, 2014, 01:32:05 PM
Supershooter,

Looks like you are doing a completely rebuild!

I only removed the outer fairing & passing lamps! It was a lot of work to install the 578's. My patience was getting real thin after 1 day to install them & another day to get the heated grips to work.

I guess living in Iowa, with all that cold & snow you'll have plenty of time to get it right! Watched the Weather Channel today & it looks like you won't be riding too soon! But then again I'm not riding this week either!

Good luck with your project! Post some pics when you are done.

Danner
Title: Re: What did you do to or on your CVO today?
Post by: cambo on January 21, 2014, 02:59:23 PM
looks damn good to me.........

OWL
Actually what I should have said was "It looks great in this picture but it looks 100x better in person".
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on January 21, 2014, 06:11:23 PM
Supershooter,

Looks like you are doing a completely rebuild!

I only removed the outer fairing & passing lamps! It was a lot of work to install the 578's. My patience was getting real thin after 1 day to install them & another day to get the heated grips to work.

I guess living in Iowa, with all that cold & snow you'll have plenty of time to get it right! Watched the Weather Channel today & it looks like you won't be riding too soon! But then again I'm not riding this week either!

Good luck with your project! Post some pics when you are done.

Danner

We have PLENTY of time to wrench lol. Just hit a balmy 7 degrees and the wind chill isn't too bad right now only -6  :coolblue: Danner who did you purchase your clutch and ABS brake lines from?
Title: Re: What did you do to or on your CVO today?
Post by: 2k on January 24, 2014, 02:17:53 PM
I have heard of the saying 'a face only a mother could love'. I guess this is an example of what they mean.

(http://www.cvoharley.com/smf/index.php?action=dlattach;topic=91568.0;attach=256210;image)

To each his own, but I have never thought a fat chick was better than a slim one.
Title: Re: What did you do to or on your CVO today?
Post by: Para Bellum on January 24, 2014, 11:42:06 PM
I kept watching 2K's swimming-pool-beauty avatar and wondering: How did that top stay on her shirt-berries?   ;)

Finished the install of the WO502 12.5 apes on the SERGU and took a nice test ride.  Big difference, and much more comfortable.  Didn't have to replace brake or clutch line; just had to re-route the clutch line and bleed it.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on January 25, 2014, 08:38:36 AM
Removed the exhaust pipe and boxed it up to ship to a rider in PA. Stripped bike down starting to install 13" apes.

(http://i1244.photobucket.com/albums/gg579/jswerve1974/Bike1_zps3ca95cf0.jpg) (http://s1244.photobucket.com/user/jswerve1974/media/Bike1_zps3ca95cf0.jpg.html)

(http://i1244.photobucket.com/albums/gg579/jswerve1974/bike3_zps8ced2f94.jpg) (http://s1244.photobucket.com/user/jswerve1974/media/bike3_zps8ced2f94.jpg.html)

(http://i1244.photobucket.com/albums/gg579/jswerve1974/bike2_zps3f714ea8.jpg) (http://s1244.photobucket.com/user/jswerve1974/media/bike2_zps3f714ea8.jpg.html)
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on January 25, 2014, 06:38:49 PM
This afternoon just outside of Lethbridge, Alberta. A cold 14 degrees Celsius or 57 degrees Fahrenheit but worth the short ride.   

Was at Edmonton Alberta many years ago at Wainwright, your picture reminds me of a great time with my Canadian Paratrooper friends.   :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Grizzly on January 25, 2014, 07:03:07 PM
This afternoon just outside of Lethbridge, Alberta. A cold 14 degrees   Celsius or 57 degrees Fahrenheit but worth the short ride.  

Cry me a river... It was -22c with the W.C. in Ontario today.  I'm sure glad you were able to enjoy a ride.

Next week the weatherman tells us to expect an "Alberta Clipper", thanks a lot!   ;D

I am glad someone in the country is able to ride though.
Title: Re: What did you do to or on your CVO today?
Post by: RoadMonkey on January 27, 2014, 06:36:32 PM
Got around to installing the mid frame deflectors. Not a big job at all, but they have been sitting in the box on the shelf too long =)
Title: Re: What did you do to or on your CVO today?
Post by: CVO2FIXUP on February 06, 2014, 02:54:42 PM
 Removed the chrome rack and will be installing the spoiler. Waiting on paint.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on February 06, 2014, 05:08:32 PM
Progress, slowly but surely. Now time to replace the brake and clutch lines.

(http://i1244.photobucket.com/albums/gg579/jswerve1974/2014-02-06103658_zps6d700186.jpg) (http://s1244.photobucket.com/user/jswerve1974/media/2014-02-06103658_zps6d700186.jpg.html)
Title: Re: What did you do to or on your CVO today?
Post by: Billy on February 06, 2014, 06:25:24 PM
Just looked at it . This is the first time in 10 yrs that I have not ridden a bike  every month of the year now it looks like it may be 3 months or more. Billy
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on February 12, 2014, 08:50:33 PM
Took the cover off the bike to show off the ride to a friend of mine.  Tempted to leave the cover off, temps are on the rise here, but the roads are still a mess.
Title: Re: What did you do to or on your CVO today?
Post by: ole bill on February 15, 2014, 12:18:33 PM
Just downloaded the 1.17.4 for the 6.5, turned on assc. switch, plugged in USB stick, took 6 mins. Done. No riding, still to much snow on the ground.
Title: Re: What did you do to or on your CVO today?
Post by: ole bill on February 15, 2014, 12:26:40 PM
See what I mean, no riding here.
Title: Re: What did you do to or on your CVO today?
Post by: wrayzor on February 15, 2014, 07:27:53 PM
Finished install of Clarion NZ503 DVD NAV Flip-out stereo. Had swap to a Klock Werks 8" windshield to allow LCD screen to flip out.
(http://i61.tinypic.com/15n7ojm.jpg)
(http://i60.tinypic.com/2ypgm60.jpg)
(http://i60.tinypic.com/v8elb6.jpg)
(http://i61.tinypic.com/2lt0g95.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: Grizzly on February 16, 2014, 10:55:15 AM
Finished install of Clarion NZ503 DVD NAV Flip-out stereo. Had swap to a Klock Werks 8" windshield to allow LCD screen to flip out.
(http://i61.tinypic.com/15n7ojm.jpg)
(http://i60.tinypic.com/2ypgm60.jpg)
(http://i60.tinypic.com/v8elb6.jpg)
(http://i61.tinypic.com/2lt0g95.jpg)

This is extremely cool... The way all H-D radios should come as standard equipment, well at least on the CVO's.   :2vrolijk_21:

Much better having the screen up high, right in your line of sight of the road ahead.

Very nice and appropriate mod.
Title: Re: What did you do to or on your CVO today?
Post by: dayne66 on February 16, 2014, 11:03:50 AM
How's the water-proofedness of the Clarion NZ503 DVD NAV Flip-out stereo?
Title: Re: What did you do to or on your CVO today?
Post by: michaelokielee@yahoo.com on February 16, 2014, 11:32:28 AM
Looks great, is the screen flipping out an option or does it always flip out?
Title: Re: What did you do to or on your CVO today?
Post by: wrayzor on February 16, 2014, 03:33:53 PM
Haven't tested the waterproofness yet, but plan to keep it as dry as possible. No, the screen can be in or out depending on your preference and can be operated in both positions from my handle bar controls.
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on February 22, 2014, 02:37:44 PM
Cleaned out the 4th garage stall, about ready to move the bike from the winter storage location along the front wall of the garage.  Can't wait to uncover the bike and get out on the road.  We probably have a couple more weeks of snow, freezing temps and chemicals on the road before I take her out.
Title: Re: What did you do to or on your CVO today?
Post by: cambo on February 22, 2014, 03:23:23 PM
Took the cover off, unplugged the battery tender, and went for a 50 mile ride!!!  :bananarock: :drink:
Title: Re: What did you do to or on your CVO today?
Post by: willyB on February 22, 2014, 06:01:30 PM
Had a 57 degree day here so the wife and I took a little 150 mile spin around the area. :2vrolijk_21:

Sure was nice to get the beast out for a little run.
Title: Re: What did you do to or on your CVO today?
Post by: Bigfoot16 on February 22, 2014, 06:38:20 PM
Uncovered, unhooked battery tender, rode to see my favorite riding buddy, my Dad, got his trike fired up.  Rode about 90 miles.. a good day... :bananarock:
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on February 22, 2014, 07:04:52 PM
Rode 200 miles with some friends, was a great day.  :jalapeno:
Title: Re: What did you do to or on your CVO today?
Post by: 05Train on February 22, 2014, 07:38:33 PM
Still waiting on parts....Two pistons (from Mother Harley) came out of their boxes with broken rings.


Sent from my iPad, probably while I'm pooping.
Title: Re: What did you do to or on your CVO today?
Post by: CVO Aqua-Glider on February 22, 2014, 08:57:17 PM
Had a 57 degree day here so the wife and I took a little 150 mile spin around the area. :2vrolijk_21:

Sure was nice to get the beast out for a little run.

We had the same idea. :)  Wife and I put 180 miles on today.  It was great to finally be out.  Saw lots of people out riding.  We went up the Mississippi in search of Eagles to photograph. Saw a few birds, but not very close to us.  No worries though because it was great to finally ride!!!
Title: Re: What did you do to or on your CVO today?
Post by: Lars on February 22, 2014, 09:47:38 PM
Snowing when I got up.
Went to the shop and built a fire in the stove.
Turned on the tunes.
Got out the wax, cleaning rags and Pig Spit.
Cleaned, waxed, and admired.
Snowed all day and still snowing.
All in all, A GOOD DAY.
Title: Re: What did you do to or on your CVO today?
Post by: Yellow09SERG on February 22, 2014, 10:22:20 PM
As strange as it sounds we got to ride it today.... :bananarock:
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on February 22, 2014, 10:24:33 PM
Amazing weather today so went from the water up thru Mt Laguna (around 6000 ft) down to the desert. Going to finally rain next weekend and we really need it so ended up doing around 300 miles which was awesome (my butt hurts..). Crazy amount of bikes of all types out today. Lots of waving.
Title: Re: What did you do to or on your CVO today?
Post by: dlaws01 on February 23, 2014, 10:55:33 AM
Sunny and 65 F on Saturday, beautiful day, mild winds so I rode to Reelfoot Lake then took the back roads to Union City. Saw many other riders out enjoying the fine break in the weather. Felt really bad for all you that have snow dumped in your area. 
Title: Re: What did you do to or on your CVO today?
Post by: Grizzly on February 23, 2014, 02:55:45 PM
Got up early to wax, polished & detailed the bike.

Actually truth be known, I got up early to watch the Canadian Men's Hockey Team   bring home the GOLD - again, then waxed, polished & detailed the bike.

Great day!   ;D
Title: Re: What did you do to or on your CVO today?
Post by: 2k on February 23, 2014, 07:13:26 PM
Got up early to wax, polished & detailed the bike.

Actually truth be known, I got up early to watch the Canadian Men's Hockey Team   bring home the GOLD - again, then waxed, polished & detailed the bike.

Great day!   ;D

And bring it home they did!!! Congrats
Title: Re: What did you do to or on your CVO today?
Post by: wrayzor on February 23, 2014, 07:38:40 PM
Rode mine one last time before my 4 month deployment. Won't ride it again till mid July!
Title: Re: What did you do to or on your CVO today?
Post by: screaminCVO on February 24, 2014, 12:16:16 AM
Got up early to wax, polished & detailed the bike.

Actually truth be known, I got up early to watch the Canadian Men's Hockey Team   bring home the GOLD - again, then waxed, polished & detailed the bike.

Great day!   ;D

Yaaaaaaaaa Canada! Our game, our gold! Congrats to an amazingy team!
Title: Re: What did you do to or on your CVO today?
Post by: DCFIREMANN on February 24, 2014, 01:42:48 AM
RODE MINE!!!!!

Be Safe

THE DAWG
Title: Re: What did you do to or on your CVO today?
Post by: JustDennis on February 24, 2014, 07:42:58 AM
Changed from mustache engine guard to standard one and mounted vented, color-matched lowers.  Then took the bike for a test ride.  Never had lowers before but think I am gonna like them.
Title: Re: What did you do to or on your CVO today?
Post by: CVO Aqua-Glider on February 24, 2014, 08:47:10 AM
Took some pics of the nav screen while pointing in 4 different directions to post on another forum. Apparently the the compass needle on the '14 Nav is not a compass needle at all. It's a pointer to show what direction you are traveling.  No wonder I thoght mine was broken.
Title: Re: What did you do to or on your CVO today?
Post by: Hnhcvo on February 24, 2014, 03:24:53 PM
Finally got my skunk home after doing a few mods, 23" fender trees etc. took it around the snowy block and really want spring to get its ass here lol
Title: Re: What did you do to or on your CVO today?
Post by: wrayzor on February 25, 2014, 08:17:42 AM
Looks great. Who made your 23" front wheel to match?
Title: Re: What did you do to or on your CVO today?
Post by: Hnhcvo on February 25, 2014, 08:52:33 AM
Looks great. Who made your 23" front wheel to match?
Got it from puzzled on here. He had renegade make them in 21-23-26 from with matching rotors in chrome or contrast.  Thx for the compliment  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on February 25, 2014, 09:22:36 PM
Picked up my toupack from the painters  :orange:
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on February 25, 2014, 09:24:33 PM
Now to get it all back together - hopefully this weekend  :2vrolijk_21:

The lid:
Title: Re: What did you do to or on your CVO today?
Post by: 05Train on February 25, 2014, 09:58:45 PM
Bike's running again.  Dave's off to T-Max training, so we'll be tuning next week.
Title: Re: What did you do to or on your CVO today?
Post by: redbeard719 on February 26, 2014, 01:53:46 PM
Finally got to spend a few minutes to get the cam chest opened up.  Went in through the top, removed rockers assemblies, etc.

Lifters and such looked ok, but they're being replaced anyway.  With 31K on the clock, no need to chance it with the stock components.

As for today, I got around to ordering a pair of Andrews 57H camshafts and Cometic head gaskets.  Just piecing the rest of the cam swap parts together over the next couple days.

(http://img.photobucket.com/albums/v322/gtigye79/Mobile%20Uploads/20140224_172206_zpsdj74nnyv.jpg) (http://smg.photobucket.com/user/gtigye79/media/Mobile%20Uploads/20140224_172206_zpsdj74nnyv.jpg.html)

(http://img.photobucket.com/albums/v322/gtigye79/Mobile%20Uploads/20140224_172457_zpswatt3dsd.jpg) (http://smg.photobucket.com/user/gtigye79/media/Mobile%20Uploads/20140224_172457_zpswatt3dsd.jpg.html)
Title: Re: What did you do to or on your CVO today?
Post by: willyB on February 26, 2014, 04:46:49 PM
Removed my V&H hi-outputs and stock de-catted header and installed my old set of V&H Dresser Duals while I'm waiting for my new 4" Rineharts. Hey, it's just something new. :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: AMEDD_SFC on February 26, 2014, 07:09:51 PM
Now to get it all back together - hopefully this weekend  :2vrolijk_21:

The lid:

Tastefully done, sir.  Very nice.

Best Regards,

Mark
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on February 26, 2014, 07:33:33 PM
Tastefully done, sir.  Very nice.

Best Regards,

Mark


Thank you. The credit however must go to the painter since he suggested adding the eagle to the lid. He was right it looks great.

The first stages of re-assembly have begun..
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on February 26, 2014, 07:37:18 PM
Please excuse the crappy pic.

 Another small touch added to the rear of the TP
Title: Re: What did you do to or on your CVO today?
Post by: willyB on February 28, 2014, 09:53:57 PM
I actually rode my bike!
Title: Re: What did you do to or on your CVO today?
Post by: Supershooter on February 28, 2014, 10:13:08 PM
Got the SEUC a little closer to finished after new bars.
Supershooter
Title: Re: What did you do to or on your CVO today?
Post by: Blueprint on March 01, 2014, 04:07:14 PM
Stopped by the dealer, had the passing lights programmed to stay on when high beam is on.   Took all of 10 minuets.  No charge....Thanks Waco Harley.......
Title: Re: What did you do to or on your CVO today?
Post by: ffltjeff on March 01, 2014, 08:10:38 PM
I ordered my new suspension today.  I am going with Progressive 444s and a Progressive fork cartridge kit.   :orange:  I will report back with my thoughts when they are installed and if it ever warms up again. 
Title: Re: What did you do to or on your CVO today?
Post by: Lars on March 01, 2014, 10:15:08 PM
Hey Supershooter,
What make and model of handlebars are those you put on your scoot???

I went for a putt today on my scoot for about 20 miles before it started snowing again.
Supposed to get several inches of new snow again tonight.
Is winter ever going to end ??
It gets into the 40's then the next day it's back into the 30's and snowing.
Title: Re: What did you do to or on your CVO today?
Post by: Supershooter on March 01, 2014, 10:23:47 PM
Lars,
They are 16in Cyclesmith Bagger apes, I think I have them positioned correctly, I'll find out in a week as we leave for a winter getaway on Mar 8th.
Supershooter
Title: Re: What did you do to or on your CVO today?
Post by: Lars on March 02, 2014, 12:06:39 AM
Thanks Supershooter.
I thick I will go with the 12 or 13 inch to keep my hands at the top of the fairing.

Thanks again.
Title: Re: What did you do to or on your CVO today?
Post by: CVOThunder on March 02, 2014, 01:58:33 AM
Not today but got my ride out of the local H-D shop on Wednesday (put it in for an early 15,000 mile service back in Nov and they let me keep it there for the winter). Only a 25 mile ride but it was great just the same. So ready for a long ride.
Title: Re: What did you do to or on your CVO today?
Post by: CVO2FIXUP on March 03, 2014, 07:01:20 PM
 So lucky !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Title: Re: What did you do to or on your CVO today?
Post by: Lars on March 03, 2014, 10:32:22 PM
Very nice video.
Our weather up here in the great northwest is crap right now so I did a little accent paint on the muffler ends.
Title: Re: What did you do to or on your CVO today?
Post by: Mr. Warlock on March 04, 2014, 03:45:56 AM
Installed Fullsac exhaust on the new ride
Title: Re: What did you do to or on your CVO today?
Post by: Cvo dude on March 05, 2014, 08:21:14 PM
Installed mustang seat riders backrest and wraparound king your PAC backrest. Now just need warmer weather to try it out. Love the ones on my 05 ultra so cabin fever forced me to spend the money. The hammock seat on my 2012 ultra but IMHO can't beat mustang.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on March 07, 2014, 06:49:33 AM
Motolights arrived last evening and I decided there was no time like the present; very pleased!
More details on the blog: http://ridingtwoup.wordpress.com/2014/03/07/and-bam-the-motolights-arrived-today/

(http://ridingtwoup.files.wordpress.com/2014/03/detailed-light.jpg?w=600)

(http://ridingtwoup.files.wordpress.com/2014/03/dscn0332.jpg)


Link didn't work so I clicked on the link in your siggy  :P
Title: Re: What did you do to or on your CVO today?
Post by: grandpadoc on March 07, 2014, 09:33:43 AM
Went for a ride yesterday, SoCal is just beginning to pop with the green and wild flowers. In another couple of weeks we will take lots of pics, but for now...
Title: Re: What did you do to or on your CVO today?
Post by: grandpadoc on March 07, 2014, 09:38:03 AM
.
Title: Re: What did you do to or on your CVO today?
Post by: Rooster on March 07, 2014, 09:53:50 AM
Must not b too chilly fingerless gloves. I'm jealous but glad to see you out and about. Thanks for the pics and that was a fine pics of some of my cousins ;D
Title: Re: What did you do to or on your CVO today?
Post by: grandpadoc on March 07, 2014, 10:50:21 AM
Must not b too chilly fingerless gloves. I'm jealous but glad to see you out and about. Thanks for the pics and that was a fine pics of some of my cousins ;D

Its been in the 80's all week but a little chilly in the morning. Our destination was at an elevation where it was a little cooler, but on the way home the jackets came off. Thanks for the post, its good to hear from you.
Title: Re: What did you do to or on your CVO today?
Post by: RoadMonkey on March 07, 2014, 10:53:57 AM
cleaned up and checked over for Daytona trip!!!!
Title: Re: What did you do to or on your CVO today?
Post by: Blueprint on March 08, 2014, 07:53:36 AM
Finished installing Fullsac DX pipe, flashed ECM.   Ready to ride.   
Title: Re: What did you do to or on your CVO today?
Post by: Blueprint on March 08, 2014, 09:36:18 AM
Took a quick ride just now and to quote Uncle Si I'm HAPPY HAPPY HAPPY  :bananarock: :bananarock:
Fullsac DX Pipe, 2" cores and tune file for the TTS...... :2vrolijk_21: :2vrolijk_21: to Steve and all @Fullsac.
I am a believer and will be spreading the word in Waco!!

Now awaiting for results of cam testing for the twin cooled.........
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on March 08, 2014, 12:50:09 PM
Finished installing my newly painted TP
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on March 08, 2014, 12:52:19 PM
Rear view.
Title: Re: What did you do to or on your CVO today?
Post by: deldago on March 08, 2014, 12:53:25 PM
Finished installing Fullsac DX pipe, flashed ECM.   Ready to ride.   
Just finished mine also! Went very smooth and not a single wrench thrown! :orange:
Title: Re: What did you do to or on your CVO today?
Post by: Billy on March 08, 2014, 04:48:20 PM
Used my new J and S jack to clean bike great investment. Maybe ride next week. Billy
Title: Re: What did you do to or on your CVO today?
Post by: Fireguy on March 09, 2014, 05:59:41 PM
Wipe it down and took my wife to breakfast.
Title: Re: What did you do to or on your CVO today?
Post by: Billy on March 09, 2014, 06:24:31 PM
Wiped it down, Rode around the block 3 times and put it back waiting for 2 foot of snow to melt. Maybe net weekend Billy
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on March 09, 2014, 09:32:01 PM
Took a nice day trip over the mountain to Cherokee. Good thing we didn't take much money cause the slot god was not nice today. At least it was a beautiful day and we got 240 miles in.
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on March 09, 2014, 11:05:57 PM
We took a nice 250 mile ride today.  :jalapeno:



Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on March 09, 2014, 11:51:06 PM
 :jalapeno:





Title: Re: What did you do to or on your CVO today?
Post by: denis on March 09, 2014, 11:59:06 PM
mine was delivered from dealer friday had 1000 check and super tuner installed keep looking at it in garage but weather still cold and streets still have salt dust maybe next week
Title: Re: What did you do to or on your CVO today?
Post by: CVO Aqua-Glider on March 10, 2014, 12:47:58 AM
Took about a 55 mile ride. :)

(http://farm8.staticflickr.com/7350/13052114903_b22932a7cb_c.jpg) (http://www.flickr.com/photos/62925555@N07/13052114903/)
Untitled (http://www.flickr.com/photos/62925555@N07/13052114903/) by oneboltzfan (http://www.flickr.com/people/62925555@N07/), on Flickr
Title: Re: What did you do to or on your CVO today?
Post by: Para Bellum on March 10, 2014, 01:25:06 AM
Just got back from 9 day ride to Vegas, San Francisco, and redwood country.  2211 miles of fun.
Title: Re: What did you do to or on your CVO today?
Post by: SBB on March 10, 2014, 01:02:17 PM
are putting me on a path to break out the Bushtec trailer for this trip. Yeah, it's trailering... but at least it's not "trailering"!

(http://ridingtwoup.files.wordpress.com/2013/11/dscn0187.jpg?w=500)


Don't pay any attention to comments about pulling a trailer with the bike.
It's the American way, you can have it and take it with you.
Great bike and great trailer.
Ride safe to Daytona.

 :2vrolijk_21:

SBB



Title: Re: What did you do to or on your CVO today?
Post by: Rooster on March 10, 2014, 01:18:24 PM

Don't pay any attention to comments about pulling a trailer with the bike.
It's the American way, you can have it and take it with you.
Great bike and great trailer.
Ride safe to Daytona.

 :2vrolijk_21:

SBB




And don't forget the best part. ITS ALL BLUE :drink:
Title: Re: What did you do to or on your CVO today?
Post by: T-Roy on March 10, 2014, 08:41:01 PM
Went for about a 150 mile ride today which included my second Patriot Guard Mission, Sure was a beautiful day for a change. Clear blue skies with a high of 80 degrees.
Title: Re: What did you do to or on your CVO today?
Post by: CVO Aqua-Glider on March 10, 2014, 11:18:35 PM
Did something I hate doing. I got out the hose and sprayed her down. Really couldn't stand all the winter salt, chemical, and brine dust all over just from riding a few times recently. That's it, I'm done. I don't care if it's 70 degs. I'm not riding again until a good rain washes all the crap off the roads. I'm afraid what the chemicals and salt are doing to the bike. Plus,  I hate cleaning. :)
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on March 10, 2014, 11:25:23 PM
Did something I hate doing. I got out the hose and sprayed her down. Really couldn't stand all the winter salt, chemical, and brine dust all over just from riding a few times recently. That's it, I'm done. I don't care if it's 70 degs. I'm not riding again until a good rain washes all the crap off the roads. I'm afraid what the chemicals and salt are doing to the bike. Plus,  I hate cleaning. :)
Killing me, I have not been out yet!  Same reason here!
Title: Re: What did you do to or on your CVO today?
Post by: CVO Aqua-Glider on March 11, 2014, 01:02:38 AM
Killing me, I have not been out yet!  Same reason here!

Yeah, be strong, and don't cave, LOL. Even though the roads look clean, they are far from it. Today I rode to work, and on the way home my eyes were even burning probably from salt air. :)
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on March 11, 2014, 04:13:18 AM
We hit 62 but I kept the old girl in the garage. I'll most likely wait until April. Need a few good rains!

Sent from my SCH-R970 using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: davidw221 on March 11, 2014, 06:10:46 AM
One of my buddies came by yesterday afternoon, his 2014 Ultra was covered with road dusk and dried up salt, asked if I wanted to go riding, I said nope, not till April.
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on March 11, 2014, 11:59:04 AM
Rode all weekend  8) it runs great with the Tman tune up it got and it looked like an ol farm truck before I gave it bath
Title: Re: What did you do to or on your CVO today?
Post by: dlaws01 on March 11, 2014, 12:28:49 PM
One of my buddies came by yesterday afternoon, his 2014 Ultra was covered with road dusk and dried up salt, asked if I wanted to go riding, I said nope, not till April.

It's a shame to miss out on a good ride with a friend.  The bike is bound to get dirty from road grime, even salt.  That's what the garden hose is for.  Ride man, ride. 
Title: Re: What did you do to or on your CVO today?
Post by: cambo on March 11, 2014, 12:34:16 PM
It's a shame to miss out on a good ride with a friend.  The bike is bound to get dirty from road grime, even salt.  That's what the garden hose is for.  Ride man, ride.
:2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on March 11, 2014, 01:13:38 PM
It's a shame to miss out on a good ride with a friend.  The bike is bound to get dirty from road grime, even salt.  That's what the garden hose is for.  Ride man, ride.

+1....It's just dirt and the grime makes the red ones go faster....... ;D  :huepfenlol2: :huepfenlol2:
Title: Re: What did you do to or on your CVO today?
Post by: cambo on March 11, 2014, 01:27:22 PM
+1....It's just dirt and the grime makes the red ones go faster....... ;D  :huepfenlol2: :huepfenlol2:
And makes the black bikes change color to Denim Silver! ;D
Title: Re: What did you do to or on your CVO today?
Post by: CVO Aqua-Glider on March 11, 2014, 01:39:28 PM
It's a shame to miss out on a good ride with a friend.  The bike is bound to get dirty from road grime, even salt.  That's what the garden hose is for.  Ride man, ride.

That's what I normally say or think....But, after reading a thread on another HD forum about "Riding on winter roads," I'm scared my bike will fall apart in no time at all from the corrosion. Not sure who to believe, so I'm going to error on the side of caution from now on.
Title: Re: What did you do to or on your CVO today?
Post by: Lever on March 11, 2014, 01:52:45 PM
I will be patient and wait til a good rain to wash off the roads surface of the winter crap
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on March 11, 2014, 02:20:17 PM
That's what I normally say or think....But, after reading a thread on another HD forum about "Riding on winter roads," I'm scared my bike will fall apart in no time at all from the corrosion. Not sure who to believe, so I'm going to error on the side of caution from now on.

With all that salt, it will rust the metal parts, they will fall off and it proves my point that they will go faster.... :huepfenlol2: :bananarock: :orange: ;D :nervous:

I obviously have WAY too much time on my hands at work today..... ::)
Title: Re: What did you do to or on your CVO today?
Post by: Hnhcvo on March 11, 2014, 05:20:01 PM
Got to take her on her first ride of 2014. And anyone who says the trees and 23" ride like chit must have bought inferior product or installed it wrong. Love my glide more than ever
Title: Re: What did you do to or on your CVO today?
Post by: donald p on March 11, 2014, 05:50:21 PM
 A side pic of that nice ride would show off the wheels better.
Title: Re: What did you do to or on your CVO today?
Post by: RoadMonkey on March 11, 2014, 09:30:21 PM
Rode back from Daytona today!!!.. 2 day trip = 1260 miles.
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on March 15, 2014, 11:13:14 AM
Will just walk past the bike on my return from a week in NOLA. Missing out on a great day at home today. Tomorrow more snow forecasted for St. Louis, so no riding this weekend.
Title: Re: What did you do to or on your CVO today?
Post by: HRider on March 15, 2014, 12:36:24 PM
this is what I did this week, finished putting trees and a 23" on my ride waiting on my fender now.
(http://i538.photobucket.com/albums/ff346/grcplaya/20140314_091314_zpswynontew.jpg) (http://s538.photobucket.com/user/grcplaya/media/20140314_091314_zpswynontew.jpg.html)
(http://i538.photobucket.com/albums/ff346/grcplaya/20140314_091537_zpstxewcbfq.jpg) (http://s538.photobucket.com/user/grcplaya/media/20140314_091537_zpstxewcbfq.jpg.html)
(http://i538.photobucket.com/albums/ff346/grcplaya/20140314_091348_zpsdbhkijdk.jpg) (http://s538.photobucket.com/user/grcplaya/media/20140314_091348_zpsdbhkijdk.jpg.html)
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on March 15, 2014, 12:39:45 PM
this is what I did this week, finished putting trees and a 23" on my ride waiting on my fender now.
(http://i538.photobucket.com/albums/ff346/grcplaya/20140314_091314_zpswynontew.jpg) (http://s538.photobucket.com/user/grcplaya/media/20140314_091314_zpswynontew.jpg.html)
(http://i538.photobucket.com/albums/ff346/grcplaya/20140314_091537_zpstxewcbfq.jpg) (http://s538.photobucket.com/user/grcplaya/media/20140314_091537_zpstxewcbfq.jpg.html)
(http://i538.photobucket.com/albums/ff346/grcplaya/20140314_091348_zpsdbhkijdk.jpg) (http://s538.photobucket.com/user/grcplaya/media/20140314_091348_zpsdbhkijdk.jpg.html)
Great looking ride!
Title: Re: What did you do to or on your CVO today?
Post by: JustDennis on March 15, 2014, 07:54:57 PM

Rode back from Daytona today!!!.. 2 day trip = 1260 miles.

Same here. About same mileage



Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Hnhcvo on March 15, 2014, 08:04:40 PM
Great looking ride!
Looks awesome.  Did the same set up but contrast on RG.  Nice work
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on March 15, 2014, 08:31:49 PM
Cloudy and a little cool; 270 mile round trip with our H.O.G. chapter to West Monroe, LA to visit the Duck Dynasty Store and enjoyed a meal at Willys Dinner.



Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on March 15, 2014, 08:32:44 PM
inside dinner
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on March 15, 2014, 08:33:32 PM
wall inside
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on March 15, 2014, 08:34:15 PM
Outside the store
Title: Re: What did you do to or on your CVO today?
Post by: SBB on March 15, 2014, 08:42:01 PM
Outside the store

Glad you got out.
Wish we had been riding on this beautiful day.
We have a place on the beach at Surfside SC and had to go for a homeowners meeting.
Unfortunately we were in the car.
Naitram has informed me my next ride needs to be on the 01 SERG.
So after the rain clears the SERG is next.

SBB


Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on March 15, 2014, 08:44:23 PM
................Naitram has informed me my next ride needs to be on the 01 SERG.
So after the rain clears the SERG is next.

SBB





 :jalapeno:     Gotta treat your children the same Chip, then ya gotta get the SEUC out for some exercise too.  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: SBB on March 15, 2014, 08:56:56 PM



 :jalapeno:     Gotta treat your children the same Chip, then ya gotta get the SEUC out for some exercise too.  :2vrolijk_21:

225 on the SEUC last Sunday, 370 on the SERGC last Tuesday, the SERG is next.
After that the Silver and Black Classic is next. Since it isn't a CVO I can't post it here.

SBB


Title: Re: What did you do to or on your CVO today?
Post by: scttgr8 on March 15, 2014, 08:59:58 PM
Rode it again FINALLY :2vrolijk_21: :2vrolijk_21: :2vrolijk_21: :2vrolijk_21: :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: cambo on March 15, 2014, 10:00:15 PM
Pulled the bike out to wash and Glare it. Then I figured I could go riding instead. So skipped the wash and went for a ride for a couple hours. It was great to see lots of bikes on the road today. :orange:
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on March 15, 2014, 10:31:43 PM
Group in front of Willy's.


The food was outstanding, I highly recommend the duck and andouille sausage gumbo, large bowl of course.   :jalapeno:

Title: Re: What did you do to or on your CVO today?
Post by: Hnhcvo on March 15, 2014, 10:42:58 PM
Did a little local mAll show and had my baby girl shine er up:)
Title: Re: What did you do to or on your CVO today?
Post by: SBB on March 15, 2014, 10:47:47 PM
Did a little local mAll show and had my baby girl shine er up:)


Looks great Hnhcvo.
If you got a plaque or trophy I hope "baby girl" gets to keep it in her room!

 :2vrolijk_21:

SBB



Title: Re: What did you do to or on your CVO today?
Post by: Hnhcvo on March 15, 2014, 11:00:00 PM

Looks great Hnhcvo.
If you got a plaque or trophy I hope "baby girl" gets to keep it in her room!

 :2vrolijk_21:

SBB
 Haha thx man!! Oh she'll take it for sure  :mango:



Title: Re: What did you do to or on your CVO today?
Post by: CVO Aqua-Glider on March 15, 2014, 11:17:21 PM
Dropped her off at the dealer to get some stuff done.

1. Installing a replacement tour pack lid. The original had a paint defect.
2. Coolant bottle filler neck program fix to stop the burping of coolant.
3. Thermostat is leaking at the elbow like everyone else's is.
4. Front left speaker is playing at 10db lower volume than the other 3 speakers.
5. Program the ECM so that the spots are on even with high beam.

My guess is #4 will not be fixed, but we'll see.
Title: Re: What did you do to or on your CVO today?
Post by: willyB on March 16, 2014, 06:59:29 AM
Washed it, rode it, enjoyed it! :bananarock:
Title: Re: What did you do to or on your CVO today?
Post by: Digital on March 16, 2014, 12:12:51 PM
this is what I did this week, finished putting trees and a 23" on my ride waiting on my fender now.
(http://i538.photobucket.com/albums/ff346/grcplaya/20140314_091314_zpswynontew.jpg) (http://s538.photobucket.com/user/grcplaya/media/20140314_091314_zpswynontew.jpg.html)
(http://i538.photobucket.com/albums/ff346/grcplaya/20140314_091537_zpstxewcbfq.jpg) (http://s538.photobucket.com/user/grcplaya/media/20140314_091537_zpstxewcbfq.jpg.html)
(http://i538.photobucket.com/albums/ff346/grcplaya/20140314_091348_zpsdbhkijdk.jpg) (http://s538.photobucket.com/user/grcplaya/media/20140314_091348_zpsdbhkijdk.jpg.html)

That looks incredible!   What are you doing for front turn signals?
Title: Re: What did you do to or on your CVO today?
Post by: Hnhcvo on March 16, 2014, 10:04:32 PM
Had to ride home in -8. Just got her back in the garage :) Was cold but man I can't wait for spring  missed riding my baby!!!
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on March 17, 2014, 11:33:22 AM
"Coudn't have carried all that stuff without the Bushtec; what a great addition that was!"



That's the next big ticket item on our wish list for those long trips. I'm thinking of an n-line model, but we'll see.


How did you like the 2" baffles on this trip?
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on March 17, 2014, 01:08:20 PM
......................
More than you wanted to know, to be sure.


Absolutely not, thanks for the details. I'm seriously considering the 2" baffle for our bike but wondered about the long trips and sound influence. We both like the deep rumble of a good set of pipes, but there is a line that I do not want to cross when that rumble is so loud that it interferes with our ability to communicate during a trip. I'd like to be somewhere deeper but not "louder" than a set of 4" Rinehart's.


We're also evolving/looking to go either to a 3/4 or full face from our 1/2 helmets for various reasons. I'm leaning to the 3/4 helmet.




Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on March 18, 2014, 09:13:49 PM
Finally got my first ride in this year on my bike. Rode about 30 miles, felt great to get out even for a short ride.
Title: Re: What did you do to or on your CVO today?
Post by: Tru-Blu on March 18, 2014, 09:25:31 PM
Ordered an Evolution Triple-vent jacket, some boots, and gloves from House of Harley for their 20% off with free shipping deal - not directly something on or for the bike, but definitely bike-related.  This is my first really nice riding jacket - looking forward to trying it when it comes in.

On a real "for the bike" note (pun intended), I ordered my Stage 1 Kit from Fullsac today!   :bananarock:  Anxious for that to get here so I can get to work!

Title: Re: What did you do to or on your CVO today?
Post by: 2k on March 18, 2014, 09:43:49 PM
Ordered an Evolution Triple-vent jacket, some boots, and gloves from House of Harley for their 20% off with free shipping deal - not directly something on or for the bike, but definitely bike-related.  This is my first really nice riding jacket - looking forward to trying it when it comes in.

On a real "for the bike" note (pun intended), I ordered my Stage 1 Kit from Fullsac today!   :bananarock:  Anxious for that to get here so I can get to work!

You gonna luv it!!!! What baffels?
Title: Re: What did you do to or on your CVO today?
Post by: Tru-Blu on March 19, 2014, 12:42:13 AM
I know most go with the 2 inch, but when I told them I wanted the deeper tone but not a whole lot more volume, they recommended the 1.75 inch.  While I'm not crazy about spending another Benjamin if they are too tame, I can at least buy another pair or wait until they show up for sale here from another member (although last attempt at buying something from a member here wasn't too good).

Anyway, whoever I talked to says that Steve runs with the 1.75's and feels that you get the nice deep tone but only just a little more volume than the stock mufflers.  If that ends up being the case, it will be perfect for me.

Tru
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on March 19, 2014, 07:57:15 AM
I know most go with the 2 inch, but when I told them I wanted the deeper tone but not a whole lot more volume, they recommended the 1.75 inch.  While I'm not crazy about spending another Benjamin if they are too tame, I can at least buy another pair or wait until they show up for sale here from another member (although last attempt at buying something from a member here wasn't too good).

Anyway, whoever I talked to says that Steve runs with the 1.75's and feels that you get the nice deep tone but only just a little more volume than the stock mufflers.  If that ends up being the case, it will be perfect for me.

Tru




I've heard the same and have this mod on my to-do-list as well. Let us know what you think of the 1.75 baffles.   :2vrolijk_21:


 

Title: Re: What did you do to or on your CVO today?
Post by: phato1 on March 19, 2014, 07:13:35 PM
I know most go with the 2 inch, but when I told them I wanted the deeper tone but not a whole lot more volume, they recommended the 1.75 inch.  While I'm not crazy about spending another Benjamin if they are too tame, I can at least buy another pair or wait until they show up for sale here from another member (although last attempt at buying something from a member here wasn't too good).

Anyway, whoever I talked to says that Steve runs with the 1.75's and feels that you get the nice deep tone but only just a little more volume than the stock mufflers.  If that ends up being the case, it will be perfect for me.

Tru

I have the 1.75 baffles on my CUSE6. IMHO you'll love the sound, nice mellow and deep at idle and just enough bark when you twist the throttle
Title: Re: What did you do to or on your CVO today?
Post by: Tru-Blu on March 19, 2014, 09:15:49 PM
Thanks, Phato - appreciate the reinforcement.  I'll definitely provide an update once they're in, but it will be a few weeks before that happens.  Kit arrives next Monday, but it won't be until first week of April before I can get to it.   :(
Title: Re: What did you do to or on your CVO today?
Post by: Yellow09SERG on March 19, 2014, 11:33:59 PM
Ordered new cams....lol...
Title: Re: What did you do to or on your CVO today?
Post by: Hnhcvo on March 20, 2014, 01:03:08 AM
Just installed air ride!!! Laying low!!!!
Title: Re: What did you do to or on your CVO today?
Post by: screaminCVO on March 20, 2014, 03:28:33 AM
Picked up the new girl last Friday, been crappy weather ever since but my Royal Blue wax showed up today and spent 3 hours waxing her........not quite finished!
Title: Re: What did you do to or on your CVO today?
Post by: 2k on March 21, 2014, 04:27:34 PM
Changed the calipers. Hard to catch with the camera. Has metal flake like the fender stripes. Happy, Happy.
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on March 21, 2014, 04:35:04 PM
Changed the calipers. Hard to catch with the camera. Has metal flake like the fender stripes. Happy, Happy.

Nice touch  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: dahsen on March 21, 2014, 04:35:49 PM
Nice touch !    :2vrolijk_21:

Ok... Already been said...  So let's say nice addition!
Title: Re: What did you do to or on your CVO today?
Post by: cambo on March 21, 2014, 04:52:58 PM
Changed the calipers. Hard to catch with the camera. Has metal flake like the fender stripes. Happy, Happy.

Looks fantastic, Jimmy! I was thinking about swapping out the OEM calipers with chrome ones. On a scale of 1 to 10 (oil change being a 3) how tough is it to take this on?

Cam
Title: Re: What did you do to or on your CVO today?
Post by: Rooster on March 21, 2014, 04:56:34 PM
Mo Blue, I like :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on March 21, 2014, 06:20:26 PM
Changed the calipers. Hard to catch with the camera. Has metal flake like the fender stripes. Happy, Happy.
Very nice!
Title: Re: What did you do to or on your CVO today?
Post by: Skipper on March 21, 2014, 06:38:35 PM
Getting ready for the hart surgery!
Title: Re: What did you do to or on your CVO today?
Post by: Tru-Blu on March 21, 2014, 06:53:57 PM
Calipers look great, Jimmy!
Title: Re: What did you do to or on your CVO today?
Post by: deldago on March 21, 2014, 08:03:17 PM
Getting ready for the hart surgery!
You are missing some serious hardware!
Title: Re: What did you do to or on your CVO today?
Post by: dahsen on March 21, 2014, 10:08:16 PM
Must take long to photoshop all those parts of that bike !
Title: Re: What did you do to or on your CVO today?
Post by: spada84 on March 21, 2014, 10:46:01 PM
Finished putting on new belt, rear compensator, pulleys and rear tire the afternoon before leaving for Daytona.  As for replacing the belt, what a pain in the azz.

Also, put the Ohlin's rear shocks on in Daytona - that was worth every cent.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on March 22, 2014, 10:09:01 PM
Finished installing extended cables for my new bars and bled clutch and brakes.

Sent from my SCH-R970 using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: spada84 on March 22, 2014, 10:54:27 PM
Good call on the Ohlins.   -- I'll probably look into having the 30mm Ohlins cartridges installed in the front-end.  Not sure how that will work with the Road King's headlight cowl that covers the tops of the fork crown.

I'm going to do the cartridges this fall, or maybe sooner whenever I'm up to pulling the ENTIRE front end of the Ultra apart.
Title: Re: What did you do to or on your CVO today?
Post by: Mr. Warlock on March 23, 2014, 07:46:31 AM
This is what mine looked like the Saturday before heading to Daytona. Installed the 944's on the rear and the HD Premium fork kit (lowered 1") on the front. Still fine tuning the 944's, front is awesome.
(http://i34.photobucket.com/albums/d123/Rammurr/2014%20CVO%20Limited/20140308_222044_zps0c577ff3.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: Hnhcvo on March 29, 2014, 10:51:22 AM
Took off the crash guard and installed a hidden fairing support
Title: Re: What did you do to or on your CVO today?
Post by: RoadMonkey on March 29, 2014, 06:04:08 PM
Aux lamps installed...and they work!!  :)
Title: Re: What did you do to or on your CVO today?
Post by: 2k on March 29, 2014, 06:08:51 PM
Hey RM.....looks great. How bout a full frontal so I can see what the spots look like with T/S delete
Title: Re: What did you do to or on your CVO today?
Post by: RoadMonkey on March 29, 2014, 06:18:57 PM
Hey RM.....looks great. How bout a full frontal so I can see what the spots look like with T/S delete
thank you! I will get a good photo tomorrow...if it is not raining, and I will use a camera and not my cheap phone ;D
Title: Re: What did you do to or on your CVO today?
Post by: Supershooter on March 29, 2014, 09:45:43 PM
Washed the TX bugs off the Ultra and cleaned up the Dyna since I was already in the shop.
Supershooter
Title: Re: What did you do to or on your CVO today?
Post by: OBB on March 29, 2014, 10:13:46 PM
Finally wired up my saddlebag spoiler lights
Changed the power feed for my driving lights
Got the wiring for my rear fascia light figured out. Fascia is still at the painter.
Put some baffling inside the fairing for the front speakers
Cleaned behind the side covers and battery area
Installed a new battery
Check the com systems on the new helmets to make sure they work

Sat on it and went "vroom vroom" while it was sleeting outside  :-X
Title: Re: What did you do to or on your CVO today?
Post by: RoadMonkey on March 29, 2014, 11:10:07 PM
I couldn't wait until tomorrow to try and get a better photo  :D
Title: Re: What did you do to or on your CVO today?
Post by: 2k on March 30, 2014, 06:59:32 AM
Looks good and clean, better than with the T/S under. Now show me your inventiveness & find a place to hide those fuggly bar mounted T/S. Got to be a way to do it and stay clear. GOOD job.
Title: Re: What did you do to or on your CVO today?
Post by: cambo on March 30, 2014, 07:09:25 AM
Looks good and clean, better than with the T/S under. Now show me your inventiveness & find a place to hide those fuggly bar mounted T/S. Got to be a way to do it and stay clear. GOOD job.
What's a T/S? :-[
Title: Re: What did you do to or on your CVO today?
Post by: OBB on March 30, 2014, 07:23:52 AM
What's a T/S? :-[
Turn Signal
Title: Re: What did you do to or on your CVO today?
Post by: cambo on March 30, 2014, 07:33:10 AM
Turn Signal

 :oops:

(http://m.memegen.com/25cw7t.jpg)

 :-[ :-[ :-[ :-[ :-[
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on March 30, 2014, 07:50:57 AM
:oops:

(http://m.memegen.com/25cw7t.jpg)

 :-[ :-[ :-[ :-[ :-[




Now thats funny!
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on March 30, 2014, 07:59:18 AM
What's a T/S? :-[
My guess is turn signals. :nixweiss:

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: 110tHunDer on March 30, 2014, 08:41:44 AM
Now thats funny!

Not as funny as Gary giving the same answer a half hour later. :huepfenlol2:

My guess is turn signals. :nixweiss:

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on March 30, 2014, 08:43:10 AM
Not as funny as Gary giving the same answer a half hour later. :huepfenlol2:






 :huepfenjump3:
Title: Re: What did you do to or on your CVO today?
Post by: timo482 on March 30, 2014, 09:22:20 AM
i am digging my bike out 40 at 8am - going to be 60 later, check tire pressure, check oils - get off the computer  :apple:
Title: Re: What did you do to or on your CVO today?
Post by: hawkeye4jw on March 30, 2014, 09:36:47 AM
Put Performance Machine Grips on and got the bike ready to ride. Finally will get it out today for a ride.

 Ride Safe
 Jack

Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on March 30, 2014, 10:06:05 AM
Not as funny as Gary giving the same answer a half hour later. :huepfenlol2:
That's what I get for reading the site on my phone didn't see there was another page and not realizing the question got answered. :oops: :-[ It least I got the answer right. :P :D

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on March 30, 2014, 10:48:46 AM
Heads by John Sachs, S&S throttle hog, new injectors,S&S stealth a.c., kury TD24 cams, kury exhaust with crusher mellows.  Chrome inner primary,Hayden m6 adjuster. 122/120   Wild Ones 577s with Tribal Hd mirrors.   I thinks that's it for now.  :)
Title: Re: What did you do to or on your CVO today?
Post by: FLHTCUSE7 on March 30, 2014, 10:50:34 AM
Added the chrome trim around the radio screen, considered selling it!
Title: Re: What did you do to or on your CVO today?
Post by: CVO Aqua-Glider on March 30, 2014, 10:56:12 AM
Added the chrome trim around the radio screen, considered selling it!
Picture please.
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on March 30, 2014, 11:35:10 AM
Looks good and clean, better than with the T/S under. Now show me your inventiveness & find a place to hide those fuggly bar mounted T/S. Got to be a way to do it and stay clear. GOOD job.

Might these or an aftermarket offering be the solution??

http://www.harley-davidson.com/store/mirror-with-auxiliary-running-light-directional-indicator
Title: Re: What did you do to or on your CVO today?
Post by: FLHTCUSE7 on March 30, 2014, 12:01:21 PM
HYG.
Title: Re: What did you do to or on your CVO today?
Post by: Twism_23 on March 30, 2014, 02:48:27 PM
Got ready to put in my HPI TB and new cams. Getting heads milled as well. :jalapeno:
Title: Re: What did you do to or on your CVO today?
Post by: CVO Aqua-Glider on March 30, 2014, 04:37:43 PM
HYG.

Thanks for posting. I see you got the chrome speaker trim too. Is there also chrome surrounding the gauges?  I think I like the look better without the chrome, but I'd sure like to see in person.
Title: Re: What did you do to or on your CVO today?
Post by: FLHTCUSE7 on March 30, 2014, 05:21:31 PM
I did not add anything to the gauges. Only the speaker and touch screen. Not sure if I like it yet. Easy to pull of and discard if needed.
Title: Re: What did you do to or on your CVO today?
Post by: Fireguy on March 30, 2014, 05:40:50 PM
Ordered this, should be in next week.
Title: Re: What did you do to or on your CVO today?
Post by: Tru-Blu on March 30, 2014, 06:51:23 PM
Took mine out of storage (father-in-law's equipment barn) to ride home in preparation for starting fullsac installation tomorrow (it was 55 here in lower Michigan today).  Assembled my new J + S motorcycle jack, and got the bike up on it.  Love the new jack.
Title: Re: What did you do to or on your CVO today?
Post by: FLHTCUSE7 on March 30, 2014, 06:51:59 PM
Ordered this, should be in next week.

That looks nice!
Title: Re: What did you do to or on your CVO today?
Post by: CVO Aqua-Glider on March 31, 2014, 08:39:54 AM
That looks nice!

LOL, order it and put it on yours, so I can see what it looks like. :)
Title: Re: What did you do to or on your CVO today?
Post by: Tru-Blu on March 31, 2014, 10:03:48 PM
Mega-bummed.  :( 

Started working on the bike today for the Fullsac install. Got all the OEM exhaust off, added some more chrome to engine, and grabbed the new Fullsac header to put it on - the new pipe did not come with any mounting flanges. So, I'm dead in the water for at least a few days. I'm sure Steve will get it sorted, but I specifically took some time off from work to get this done.

Tomorrow's another day.

Tru - who is definitely Blu today  :-( 
Title: Re: What did you do to or on your CVO today?
Post by: RoadMonkey on April 01, 2014, 12:37:08 AM
FXD_TG sounds very helpful Tru-Blu! If correct, that would be GREAT!
Title: Re: What did you do to or on your CVO today?
Post by: Mr. Warlock on April 01, 2014, 05:20:33 AM
Yes, your supposed to reuse your stock flanges and C clips.
Title: Re: What did you do to or on your CVO today?
Post by: Tru-Blu on April 01, 2014, 10:25:50 AM
Ok, maybe I'm missing something, but there's a slight bell flare at the end of each pipe - so how do get the flanges off?  Also, Fullsac's description for the pipe lists "CNC-machined billet flanges" which I would assume to be new mounting flanges.

I'm great with reusing the stocks, but how do you get them off and onto the other pipes?  I apologize in advance if that's a stupid question that I should clearly see. 
Title: Re: What did you do to or on your CVO today?
Post by: AMEDD_SFC on April 01, 2014, 11:04:55 AM
Ok, maybe I'm missing something, but there's a slight bell flare at the end of each pipe - so how do get the flanges off?  Also, Fullsac's description for the pipe lists "CNC-machined billet flanges" which I would assume to be new mounting flanges.

I'm great with reusing the stocks, but how do you get them off and onto the other pipes?  I apologize in advance if that's a stupid question that I should clearly see.

They can be a bit a of a bear to get off, but they do come off.  Kind of bend and twist with a pair of pliers - starting at one end.

Grab one end of the "C" and get it up around the pipe flange and walk it around and pull it off.

Regards,

Mark

P.S.  If you don't mess up the gaskets getting the pipes off, I recommend leaving them in there.  Installing the new ones is a bear, too.
I had a heck of a time (on my first install)  getting the gasket to seat flush.  They make a tool, but I wasn't gonna' invest for one install.

When I did my brother's bike, we just left the originals in.  They were basically brand new anyway.
Title: Re: What did you do to or on your CVO today?
Post by: Tru-Blu on April 01, 2014, 11:14:24 AM
Figured it out before anyone replied, but thanks to those who did. I think the most appropriate line would be from the movie 'Top Gun.'  "The State Department regrets to inform you that your sons are dead because they were stupid."

It took me a grand total of 2 minutes to get the C-ring retainers off, and find that the flanges slid right off.

Geez <face palm>

We now return you to your regularly scheduled and intelligent content.
Title: Re: What did you do to or on your CVO today?
Post by: JustDennis on April 01, 2014, 01:02:00 PM
Figured it out before anyone replied, but thanks to those who did. I think the most appropriate line would be from the movie 'Top Gun.'  "The State Department regrets to inform you that your sons are dead because they were stupid."

It took me a grand total of 2 minutes to get the C-ring retainers off, and find that the flanges slid right off.

Geez <face palm>

We now return you to your regularly scheduled and intelligent content.

Don't worry. I am sure there are "others" who have done the same thing the first time. ;)  ::)  Don't ask how I know
Title: Re: What did you do to or on your CVO today?
Post by: cambo on April 01, 2014, 02:48:24 PM
Went for a short 100 mile ride to the dealership that is the farthest away to buy some more chrome polish. Ran into a couple of riders, one had a Road King and the other one a Limited. Ended up standing around and talking about our bikes and all the past and future mods for a couple of hours!!! Instant friendship. :)

(https://farm8.staticflickr.com/7061/13565546823_0948622041_c.jpg) (https://flic.kr/p/mEJYsk)

Cam
Title: Re: What did you do to or on your CVO today?
Post by: WVHoop on April 01, 2014, 06:19:14 PM
Rode it & loved it........first time in 5 months. Almost forgot just how awesome it feels to ride it!!
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on April 01, 2014, 07:31:21 PM
Rode it & loved it........first time in 5 months. Almost forgot just how awesome it feels to ride it!!

Nice  :bananarock:
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on April 01, 2014, 07:56:56 PM
Don't worry. I am sure there are "others" who have done the same thing the first time. ;)  ::)  Don't ask how I know

Just as long as you don't do it the SECOND time  :huepfenlol2:
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on April 01, 2014, 09:41:23 PM
On day 2 of our week long bayou trip to Lafeyette LA. Rode some back roads from Baton Rouge to Morgan City LA then back north to our Hotel.  Great day of riding and then finished it off with some étouffée from Prejeans. 
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on April 01, 2014, 09:47:14 PM
 :2vrolijk_21:

Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on April 01, 2014, 10:18:20 PM
On day 2 of our week long bayou trip to Lafeyette LA. Rode some back roads from Baton Rouge to Morgan City LA then back north to our Hotel.  Great day of riding and then finished it off with some étouffée from Prejeans.
Now that sounds like a good trip.
Title: Re: What did you do to or on your CVO today?
Post by: Fireguy on April 02, 2014, 05:34:00 PM
Your pack chrome trim.
Would someone fix my pics please. Thanks.
Title: Re: What did you do to or on your CVO today?
Post by: Fireguy on April 02, 2014, 05:35:54 PM
Before
Title: Re: What did you do to or on your CVO today?
Post by: Fireguy on April 02, 2014, 05:38:48 PM
Installing
Title: Re: What did you do to or on your CVO today?
Post by: Fireguy on April 02, 2014, 05:39:51 PM
Finished
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on April 02, 2014, 06:28:54 PM
Your pack chrome trim.
Would someone fix my pics please. Thanks.

I can't fix/edit others posts, but - how's this??
Title: Re: What did you do to or on your CVO today?
Post by: AMEDD_SFC on April 03, 2014, 11:01:48 AM
Nice job!

I think I need this.

M
Title: Re: What did you do to or on your CVO today?
Post by: Tru-Blu on April 03, 2014, 11:07:34 AM
This is more like what I did on it one day, then the next, then the next, and yet another day.  I'll throw a summary/lessons learned in the Intake/Exhaust thread, but figured I would chronicle some of my experiences (and stupidity) here since it still fits with the top of the thread:

Fullsac Install - Day 1 (Monday)

Fullsac Install - Day 2 (Tuesday)

Fullsac Install - Day 3 (Wednesday)

Fullsac Install - Day 4 (Today's schedule)

It's been pretty disparaging that something that most guys are finishing in 4 - 6 hours is taking me 3.5 days to complete.  While I'm no master-mechanic, I've done enough to consider myself to be decently competent (motor swaps, chassis rebuilds, etc).  But, at least it will finally be done.  Sorry how long this was, but if you were able to have a chuckle or two at my expense then it might be worth it.

Tru
Title: Re: What did you do to or on your CVO today?
Post by: 2k on April 03, 2014, 11:29:27 AM
Sounds like a lot of frustration........but the end results is what counts most. That is, unless you were working on my scooter and charging me 75 bucks per hr.  :nervous:
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on April 03, 2014, 12:30:04 PM
Dude...  I feel for you.  I think most of us have had at least one "project from hell" while working on a bike, car, house or in our real jobs.

On a lighter note, I was waiting to see the "drank another beer / shot" in there somewhere, similar to the old "how to change your oil" schtick just to add color:

1) Wait until Saturday, drive to auto parts store and buy a case of oil, filter, kitty litter, hand cleaner and a scented tree ($50.00)
2) Stop by 7/11 and buy a case of beer, drive home. ($20)
3) Open a beer and drink it.
4) Jack car up. Spend 30 minutes looking for jack stands.
5) Find jack stands under kid's pedal car.
6) In frustration, open another beer and drink it.
7) Place drain pan under engine.
8 ) Look for 9/16 box end wrench.
9) Give up and use crescent wrench.
10) Unscrew drain plug.
11) Drop drain plug in pan of hot oil: splash hot oil on you in process. Cuss..
12) Crawl out from under car to wipe hot oil off of face and arms.Throw kitty litter on spilled oil.
13) Have another beer while watching oil drain.
14) Spend 30 minutes looking for oil filter wrench.
15) Give up; crawl under car and hammer a screwdriver through oil filter and twist off.
16) Crawl out from under car with dripping oil filter splashing oil everywhere from holes. Cleverly hide old oil filter among trash in trash can to avoid environmental penalties. Drink a beer.
17) Install new oil filter making sure to apply a thin coat of oil to gasket surface.
18) Dump first quart of fresh oil into engine.
19) Remember drain plug from step 11.
20) Hurry to find drain plug in drain pan.
21) Drink beer.
22) Discover that first quart of fresh oil is now on the floor. Throw kitty litter on oil spill.
23) Get drain plug back in with only a minor spill. Drink beer.
24) Crawl under car getting kitty litter into eyes. Wipe eyes with oily rag used to clean drain plug. Slip with stupid crescent wrench tightening drain plug and bang knuckles on frame removing any excess skin between knuckles and frame.
25) Begin cussing fit.
26) Throw stupid crescent wrench.
27) Cuss for additional 5 minutes because wrench hit bowling trophy.
28) Beer.
29) Clean up hands and bandage as required to stop blood flow.
30) Beer.
31) Dump in five fresh quarts of oil.
32) Beer.
33) Lower car from jack stands..
34) Move car back to apply more kitty litter to fresh oil spilled during any missed steps.
35) Beer.
36) Test drive car.
37) Get pulled over: arrested for driving under the influence. ($2,500)
38) Car gets impounded.
39) Call loving wife, make bail.  ($1,500)
40) 12 hours later, get car from impound yard. ($75)

Cost of oil change: $4,145.00
 But you know the job was done right!

LOLOLOLOL   :coolblue:
Title: Re: What did you do to or on your CVO today?
Post by: Digital on April 03, 2014, 12:52:26 PM
I just ordered 2" Cores and sleeves from Fullsac even though I already have Supertrapp Stouts.   Gotta see what all of the fuss is about.   

I think I will order the Fullsac DX headers and TTS this week as well.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on April 03, 2014, 02:54:07 PM
Made an appointment for cams, lifters, and a tune at Dragos Bike Works

Sent from my SCH-R970 using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: AMEDD_SFC on April 03, 2014, 03:15:28 PM
This is more like what I did on it one day, then the next, then the next, and yet another day.  I'll throw a summary/lessons learned in the Intake/Exhaust thread, but figured I would chronicle some of my experiences (and stupidity) here since it still fits with the top of the thread:

Fullsac Install - Day 1 (Monday)
  • Removed exhaust system from the bike (2 hours) - A little slow, but I was trying to be careful.  Took pictures of clamp positions in hopes that it would help with re-assembling.
  • Installed and updated MasterTune software (30 minutes)
  • Install additional chrome pieces to engine (4 hours) - I love a fully-chromed out engine, and I wish Harley would make more parts/covers for the 110 because trying to wrestle with Kuryakyn parts flat out sucks

Fullsac Install - Day 2 (Tuesday)
  • Start installation of new header pipe (1 hour) - Realize that there are no mounting flanges on the new header pipe.  Call Fullsac and leave a message.  If I would have just spent the 2 minutes removing the C-Clips, I might have tried to slide the existing flanges off the pipe and saw that they would come straight off.  I come from the automotive world where the flanges are on the pipe, and can't come off.  So if you don't have flanges, you don't have a way to install it.
  • Disconnect heater wire from wall outlet (5 seconds) and opt to let it fall instead of setting it on the ground.  Stare in horror (20 seconds) as said cord falls the wrong way and hits the bottom of the left hard bag (that was only partially covered up) and puts a tiny nick/chip in the paint.
  • Install HD chrome head bolt bridges on engine (2.5 hours - 1 hour spent looking for a hex stud insert that I dropped) - I'm breaking the rules on this one, and I'll probably pay for it later (which means I'll end up taking them off).  I love the way these look, but I am afraid of what it's going to do with the air flow to the area in the middle of the heads.  Had to dremel the outer side of each bridge so that the spark plug wire could be removed and put back on easily.
  • Get out torque wrench in preparation for head pipe install.  Remember it was broken from over 10 years ago, and was not replaced.  Run to Sears to get a new one (1.5 hours)
  • Finally start installing head pipe (1 hour) - Had wife help with holding and watching front part of the pipe so I could get it aligned in the first shot.
  • Start re-installing heat shields on new header pipe (2 hours) - Yes, that's right - 2 hours.  I could not get them to align like the way they were on the factory pipe.  I realized it was a different pipe design, but I felt like I should be able to do it.  Finally gave up and left them as they were. Overtightened the shield between the muffler and the upper shields, and put two small dents in it from where the clamp mounts were.
  • Install cross-over pipe (30 minutes)

Fullsac Install - Day 3 (Wednesday)
  • Remove old cores from mufflers (2 hours) - Yep, another 2 hours for something that most guys are getting done in about 30 minutes.  I was completely paranoid of going too deep and going through the muffler wall (almost did on one can).  Started wailing on the core trying to break it lose while the muffler was sitting on a small table.  Forgot that I had left the Dremel sitting on said table, and watched it fall and break the grinding disks and bend the screw holding them on.
  • Install wrapping with new cores (1.5 hours) - Yet something else that should have taken about 30 minutes.  I wanted to use all of the wrapping so that the new exhaust wouldn't be much louder than stock, but just sound better.  The first can went great.  The second can I had to do 3 times before everything went in, and managed to get it stuck on the 2nd try which required pliers to pull back out.
  • Install mufflers, heat shields, and end caps (1 hour) - Realized that the end caps have to go on before the muffler heat shields go on AFTER I put the heat shields on.

Fullsac Install - Day 4 (Today's schedule)
  • Finish installing end caps and reinstall muffler heat shields
  • Re-install right foot board
  • Program ECM with new fuel map
  • Re-install side covers and bags

It's been pretty disparaging that something that most guys are finishing in 4 - 6 hours is taking me 3.5 days to complete.  While I'm no master-mechanic, I've done enough to consider myself to be decently competent (motor swaps, chassis rebuilds, etc).  But, at least it will finally be done.  Sorry how long this was, but if you were able to have a chuckle or two at my expense then it might be worth it.

Tru

Please tell me you like the sound....   :P

In the words of a former president, " I feel your pain."

Kind Regards,

Mark
Title: Re: What did you do to or on your CVO today?
Post by: T-Roy on April 03, 2014, 06:24:40 PM
I had the last 4 days off with awesome weather no less. So I rode a couple hundred miles each day and also managed to install a set of heat demons grip heaters. However, the heaters do not work. The left one is defective. Heat Demons is sending a replacement but it won't be here until after I leave for another trip to work. Just gonna be a little bit of a pain to disassemble again but the weather was just too beautiful not to put it all back together and ride!!!!
Title: Re: What did you do to or on your CVO today?
Post by: iqoair on April 04, 2014, 12:20:58 AM

Just had my shop install Andrews 54 cams and thinner head gaskets along with a Dyno Tune.
Title: Re: What did you do to or on your CVO today?
Post by: screaminCVO on April 04, 2014, 01:42:17 AM
 Wiped it down with Purple Slice ............................20 minutes. :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: 2k on April 04, 2014, 07:43:34 AM
Just had my shop install Andrews 54 cams and thinner head gaskets along with a Dyno Tune.

Did you cross the elusive "100"
Title: Re: What did you do to or on your CVO today?
Post by: Digital on April 04, 2014, 10:06:23 AM
Got the pipes ready for the Fullsac 2" cores that are incoming. 

(http://i1239.photobucket.com/albums/ff505/Digital1976/5F31B664-46CC-4CB9-9F21-84859161C208_zpstjaawmkk.jpg) (http://s1239.photobucket.com/user/Digital1976/media/5F31B664-46CC-4CB9-9F21-84859161C208_zpstjaawmkk.jpg.html)

(http://i1239.photobucket.com/albums/ff505/Digital1976/FB725058-8664-4C2D-83AB-353DF35D2028_zps7mlwrihv.jpg) (http://s1239.photobucket.com/user/Digital1976/media/FB725058-8664-4C2D-83AB-353DF35D2028_zps7mlwrihv.jpg.html)

(http://i1239.photobucket.com/albums/ff505/Digital1976/2C3FC8CD-136E-4B56-9ACE-E68968A1F2ED_zpsttrt7rry.jpg) (http://s1239.photobucket.com/user/Digital1976/media/2C3FC8CD-136E-4B56-9ACE-E68968A1F2ED_zpsttrt7rry.jpg.html)

(http://i1239.photobucket.com/albums/ff505/Digital1976/3FC65435-8F82-48DF-A06D-27E170E9F311_zpsv4ebm2gq.jpg) (http://s1239.photobucket.com/user/Digital1976/media/3FC65435-8F82-48DF-A06D-27E170E9F311_zpsv4ebm2gq.jpg.html)

(http://i1239.photobucket.com/albums/ff505/Digital1976/15BFC2D7-476B-40AF-AACD-45914B517C63_zpswmz1unsm.jpg) (http://s1239.photobucket.com/user/Digital1976/media/15BFC2D7-476B-40AF-AACD-45914B517C63_zpswmz1unsm.jpg.html)
Title: Re: What did you do to or on your CVO today?
Post by: Digital on April 04, 2014, 12:22:48 PM
What's the story on the toy handgun?  :nixweiss:

HA!   I didn't notice that.   My kid and his buddies run around the subdivision shooting each other with airsoft pellets.  Those things hurt!
Title: Re: What did you do to or on your CVO today?
Post by: CVO Aqua-Glider on April 04, 2014, 02:01:03 PM
What's the story on the toy handgun?  :nixweiss:

Shows you what I know. I thought it was a real gun. :)
Title: Re: What did you do to or on your CVO today?
Post by: iqoair on April 05, 2014, 04:44:47 PM
Did you cross the elusive "100"

Went from 81 HP, to 96 HP and 106 ft lbs of torque. Not bad ! Road it home today, and holy crap, what a difference.
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on April 05, 2014, 06:52:40 PM
got into my first street fight today with a couple of crouch rockets  ;) and yep this old man has something to brag about  :bananarock:
Title: Re: What did you do to or on your CVO today?
Post by: Fireguy on April 05, 2014, 07:46:03 PM
got into my first street fight today with a couple of crouch rockets  ;) and yep this old man has something to brag about  :bananarock:
Well tell us about it.
Title: Re: What did you do to or on your CVO today?
Post by: Para Bellum on April 05, 2014, 11:48:05 PM
Quote
Quote from: fastfreddy on Today at 03:52:40 PM

    got into my first street fight today with a couple of crouch rockets  ;) and yep this old man has something to brag about  :bananarock:

Well tell us about it.

X2

Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on April 06, 2014, 09:51:42 AM
Went for a quick ride started looking at how to remove the rear fender reflector.
Once that is off, adding Run/Stop/Turn LED light strip to the fender.
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on April 06, 2014, 10:50:39 AM
X2
http://www.youtube.com/watch?feature=player_detailpage&v=myGMlgk3PuI well it went something like this :)
Title: Re: What did you do to or on your CVO today?
Post by: Tru-Blu on April 06, 2014, 02:20:47 PM
Went for about a 30 mile ride to burn off the oil on the new Fullsac pipes.  The 1.75" cores were perfect for being pretty much as loud as stock, but sounding 1000% better.
Title: Re: What did you do to or on your CVO today?
Post by: deldago on April 06, 2014, 07:28:50 PM
Added a Corbin "close" seat with a nose job and added heat to keep the wife happy. It moves you closer to the handlebars which allowed me to roll the bars forward which gives me a much better grip on the bars without changing them to taller bars. The nose job which narrows the front of the seat puts me flat footed now which makes for much better footing. The drivers backrest is just icing on the cake.(http://i990.photobucket.com/albums/af23/deldago/40b6ba87-45db-47e0-9710-8bad17bd2948.jpg) (http://s990.photobucket.com/user/deldago/media/40b6ba87-45db-47e0-9710-8bad17bd2948.jpg.html)
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on April 06, 2014, 08:31:09 PM
Finally got out for the first decent ride of the season. The wife and I went out and did some errands and took a nice 3 hour tour after the errands were complete. Felt great to get back in the saddle  :bananarock:
Title: Re: What did you do to or on your CVO today?
Post by: Twism_23 on April 08, 2014, 11:01:44 PM
Took heads to be milled and have AV&V springs, seals installed. Installed my Kury TC24D cams and Zippers tensioners.
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on April 09, 2014, 07:19:19 AM
Added passing lamps on my sg3.  I gave in,, I want to see that 2x4 laying in the road in the dark before I just ride over it.  I've been having a  time making turns at night time,,, I hope this helps.  Stuart.
Title: Re: What did you do to or on your CVO today?
Post by: 1sharprdkg on April 09, 2014, 12:12:03 PM
Added passing lamps on my sg3.  I give in,, I want to see that 2x4 laying in the road in the dark before I just ride over it.  I having a time time making turns at night time,,, I hope this helps.  Stuart.
More light the better my friend. It will help a lot.
Title: Re: What did you do to or on your CVO today?
Post by: FLY-DOG on April 09, 2014, 06:47:36 PM
I did the same as every other year in mid April in Georgia.......wiped all the yellow pollen off my CVO, went for a ride, then wiped all the yellow pollen off my bike again.....ride and repeat daily.  Pine pollen is usually thick this time of year.    :huepfenlol2:
Title: Re: What did you do to or on your CVO today?
Post by: Billy on April 09, 2014, 06:52:33 PM
Added a Corbin "close" seat with a nose job and added heat to keep the wife happy. It moves you closer to the handlebars which allowed me to roll the bars forward which gives me a much better grip on the bars without changing them to taller bars. The nose job which narrows the front of the seat puts me flat footed now which makes for much better footing. The drivers backrest is just icing on the cake.(http://i990.photobucket.com/albums/af23/deldago/40b6ba87-45db-47e0-9710-8bad17bd2948.jpg) (http://s990.photobucket.com/user/deldago/media/40b6ba87-45db-47e0-9710-8bad17bd2948.jpg.html)
I know this is a personal preference But have you ever tried Mustang seats? My wife will need to move up pn her Road king  but not sure which seat to get Mustang or Corbin?    Thanks Billy
Title: Re: What did you do to or on your CVO today?
Post by: OBB on April 09, 2014, 07:31:21 PM
Picked it up from the dealer after a new stator install and dyno tune to get the thing running better. Got it home and changed out the GB doors to the magnetic ones and installed my rain sock under the cover of my air cleaner so I don't forget it when I wash the bike or get caught in the rain.

Dyno sheets on another thread

glove box doors.

(http://i275.photobucket.com/albums/jj306/ohiobellboy/2011%20Road%20Glide%20Ultra/magneticgbdoors2_zps2ea4bf97.jpg) (http://s275.photobucket.com/user/ohiobellboy/media/2011%20Road%20Glide%20Ultra/magneticgbdoors2_zps2ea4bf97.jpg.html)

(http://i275.photobucket.com/albums/jj306/ohiobellboy/2011%20Road%20Glide%20Ultra/magneticgbdoors1_zps0406a229.jpg) (http://s275.photobucket.com/user/ohiobellboy/media/2011%20Road%20Glide%20Ultra/magneticgbdoors1_zps0406a229.jpg.html)
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on April 09, 2014, 11:07:07 PM
put her into ultra mode...then
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on April 09, 2014, 11:11:51 PM
me & momma went for lill ride and landed at BIKE NIGHT @ the Lube
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on April 09, 2014, 11:14:34 PM
me & momma went for lill ride and landed at BIKE NIGHT @ the Lube
sweet!

Sent from my SCH-R970 using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: 1sharprdkg on April 09, 2014, 11:59:04 PM
sweet!

Sent from my SCH-R970 using Tapatalk
Yeah, looks like a good crowd!
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on April 11, 2014, 07:10:14 PM
It's a rainy evening so I decided to dress up the horn cover a little.
Title: Re: What did you do to or on your CVO today?
Post by: 2k on April 11, 2014, 08:00:53 PM
OK, so which looks better?

One Up?
Title: Re: What did you do to or on your CVO today?
Post by: 2k on April 11, 2014, 08:01:47 PM
Two Up?
Title: Re: What did you do to or on your CVO today?
Post by: 2k on April 11, 2014, 08:02:58 PM
Or Neckid?
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on April 11, 2014, 08:04:08 PM
I'll vote for two up. With the TP moved up I think it makes the bike look stubby  :nixweiss:

Note I posted this BEFORE the naked pic....
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on April 11, 2014, 08:05:35 PM
Or Neckid?

Then again NAKED is always best  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on April 11, 2014, 08:07:18 PM
OK, so which looks better?

One Up?
Two Up?
Or Neckid?
My vote is for the same way I order my wings at Hooters.... "I like my wings like I like my woman.... hot and nekkid" :D

Seriously... you've got all your bases covered :2vrolijk_21:... depending on when and if you have a BSR would depend on where you put the TP... personally I don't care for a TP on daily and only use it when I have to.

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: porthole on April 11, 2014, 08:25:25 PM
I move my tourpak around the same way depending on how I will travel. Haven't done it yet, but I think it would look better when forward if the lid had the SEEG CVO style back rest.

Looks like I have mine back just a bit further. The speaker pods fill up the gap pretty good too.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on April 11, 2014, 09:15:18 PM
Or Neckid?

Nekkid always the best.
Title: Re: What did you do to or on your CVO today?
Post by: DCC on April 11, 2014, 09:40:49 PM
Nekkid always the best.
x2 on Nekkid  :pepper:
Title: Re: What did you do to or on your CVO today?
Post by: 2k on April 11, 2014, 09:52:16 PM
I move my tourpak around the same way depending on how I will travel. Haven't done it yet, but I think it would look better when forward if the lid had the SEEG CVO style back rest.

Looks like I have mine back just a bit further. The speaker pods fill up the gap pretty good too.

Looks like I'm hunting a pair of speaker pods, because I agree, they fill in an otherwise ugly void.
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on April 11, 2014, 09:55:49 PM
I'll vote for two up. With the TP moved up I think it makes the bike look stubby  :nixweiss:

Note I posted this BEFORE the naked pic....
X2
Title: Re: What did you do to or on your CVO today?
Post by: T-Roy on April 11, 2014, 10:26:54 PM
Looks like I'm hunting a pair of speaker pods, because I agree, they fill in an otherwise ugly void.

Hey Jimmy before I decided on the swinebox I was concerned about that gap that the Harley tourpak leaves also. I had found some dummy pods on fleabay that filled the gap. They were the same size and shape just no speakers. If you add speakers you are going to have to add and amplifier and such. I will see if I can find those dummy pods again and post a link to them.
Title: Re: What did you do to or on your CVO today?
Post by: T-Roy on April 11, 2014, 10:34:31 PM
Here are the dummy pods. I found them faster than I thought I would.
http://www.ebay.com/itm/Harley-Davidson-speaker-box-dummy-pods-/330866695717?pt=Motorcycles_Parts_Accessories&vxp=mtr&hash=item4d09311e25#ht_411wt_1124
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on April 12, 2014, 03:38:45 PM
RODE IT!!!!!!
:vrolijk27: :orange: :orange: :huepfenlol2:

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: 2010Convertable on April 12, 2014, 03:58:23 PM
Rode to my grand daughter's Softball game practice. Beautiful weather here, just a little windy. There was a large group of Harleys that I past (approximately 35 or so) going across the Englewood, Ohio Dam. I just love the rumble of a large group of Harley's... :orange:


Title: Re: What did you do to or on your CVO today?
Post by: FLHTCUSE7 on April 12, 2014, 04:13:49 PM
Rode for a while until it started to snow  :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: cambo on April 12, 2014, 05:13:03 PM
Rode for about 100 miles. The winter is definitely dead!!! Tomorrow hoping for a 300 mile ride with a couple of riding buddies. :cucumber:

(https://farm4.staticflickr.com/3720/13806462174_651ff2a29f_z.jpg) (https://flic.kr/p/n32Jch)

Cam
Title: Re: What did you do to or on your CVO today?
Post by: stevehd on April 12, 2014, 07:20:08 PM
Finally made it to the dealer to get the annual state safety inspection.  For some reason the trip home was 30 miles longer than the trip to the dealer.
Title: Re: What did you do to or on your CVO today?
Post by: cambo on April 12, 2014, 07:40:45 PM
Finally made it to the dealer to get the annual state safety inspection.  For some reason the trip home was 30 miles longer than the trip to the dealer.

I seem to have the same problem these days... :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on April 12, 2014, 08:18:59 PM
Nothing! Damn thing is 300 miles away!
Title: Re: What did you do to or on your CVO today?
Post by: FLY-DOG on April 12, 2014, 08:50:39 PM
Wife and I, along with 2 other couples rode from about 35 miles south of Atlanta to Dahlonega, Georgia then over to Helen where we stopped for lunch.  Hundreds of bikes out cruising through Helen (95% Harley's). Probably 75 Harley's were at the patio restaurant where we stopped at for lunch, all lined up in a row out front with my CVO right in the middle.  :P  They had a really good guitar player / singer entertaining the crowd.  Enjoyed the day, weather was perfect..... I have a sunburned face to prove it!!
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on April 12, 2014, 09:04:40 PM
RODE IT!!!!!!
:vrolijk27: :orange: :orange: :huepfenlol2:

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:

X2
Title: Re: What did you do to or on your CVO today?
Post by: dayne66 on April 12, 2014, 09:09:35 PM
Took the longest route possible running some errands on Ruby.
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on April 12, 2014, 09:38:35 PM
Washed it, then rode to dinner with some friends to eat crab legs at the casino. Stuffed myself; bought a power ball ticket; what a wonderful day.
Title: Re: What did you do to or on your CVO today?
Post by: hawkeye4jw on April 13, 2014, 09:55:40 AM
Took a couple hundred mile ride to Starved Rock for lunch with my wife. Was brutally windy here. I think my tires are round again from leaning into the wind all day. LOL

Ride Safe
 Jack

Title: Re: What did you do to or on your CVO today?
Post by: Honneybeast on April 13, 2014, 12:24:00 PM
Not today but yesterday, put about 550 miles on it with my wife. It was her birthday so we went for a ride and spent the day together alone ( a rare moment ). It was 80 Deg and sunny all day, we had a great day together. Thank the man upstairs for the little things in life.
Title: Re: What did you do to or on your CVO today?
Post by: screaminCVO on April 13, 2014, 01:14:20 PM
Rode the Sea to Sky Hiway to Squamish - perfect spring day!
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on April 13, 2014, 09:43:43 PM
i put the hd 12v power kit in the right saddle bag,,, no riding today,,it poured all day here..  Tedious and a pain,, but it's in and it works,,be nice if the link had about 2 more inches tho...'its nice and its a good solid mount...  The drill doesn't bother me as much anymore,,, :'( :'( :nervous:       i got my radio back from iron cross the other other day,,,   had them do the blue tooth upgrade,,   works really good..  clean and no wires... i can have my tunes or pandora anytime now... :orange:
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on April 13, 2014, 10:35:52 PM
i put the hd 12v power kit in the right saddle bag,,, no riding today,,it poured all day here..  Tedious and a pain,, but it's in and it works,,be nice if the link had about 2 more inches tho...'its nice and its a good solid mount...  The drill doesn't bother me as much anymore,,, :'( :'( :nervous:       i got my radio back from iron cross the other other day,,,   had them do the blue tooth upgrade,,   works really good..  clear and no wires... i can have my tunes or pandora anytime now... :orange:

People always wishing they had 2 more inches.

Sent from my SCH-R970 using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on April 14, 2014, 06:33:57 AM
Not the first time for me either  :D
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on April 14, 2014, 07:17:30 AM
Not the first time for me either  :D



Sent from my SCH-R970 using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: kastout on April 14, 2014, 07:38:13 AM
I put on the new tribal mirrors, rear plate bracket, and a nice ride to and from work
Title: Re: What did you do to or on your CVO today?
Post by: Opossum on April 14, 2014, 09:18:34 AM
Rode the back roads of East Texas with 25 of my closest friends.  That's me second from the end.
Title: Re: What did you do to or on your CVO today?
Post by: Rooster on April 14, 2014, 09:30:31 AM
My kind of traffic :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: pkl on April 14, 2014, 10:34:14 AM
Looks just like you
Title: Re: What did you do to or on your CVO today?
Post by: 2k on April 14, 2014, 10:35:08 AM
Sorry, but this is the best way to configure your CVORK...

Would gladly dump my Tourpak if FXD_TG would let me borrow that one off Backrest!!!  :drummer:

(http://ridingtwoup.files.wordpress.com/2013/09/1070781-129slayer.jpg?w=1200)
Title: Re: What did you do to or on your CVO today?
Post by: CVO Aqua-Glider on April 14, 2014, 01:14:53 PM
Rode the back roads of East Texas with 25 of my closest friends.  That's me second from the end.

Cool pic, but is it against the law to ride in a staggered formation in TX? :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: cambo on April 14, 2014, 01:19:54 PM
Cool pic, but is it against the law to ride in a staggered formation in TX? :nixweiss:

To me it looks like it IS the staggered formation, only in a random fashion. ;D

Cam
Title: Re: What did you do to or on your CVO today?
Post by: Opossum on April 14, 2014, 02:47:52 PM
Cool pic, but is it against the law to ride in a staggered formation in TX? :nixweiss:
I would've called it more of a ragged formation, on the back roads single file..Me thinks it's against the law to ride side by side in Texas, but staggered is how we roll normal
Title: Re: What did you do to or on your CVO today?
Post by: Opossum on April 14, 2014, 02:49:42 PM
Looks just like you
OK, that's fuuny  :D
Title: Re: What did you do to or on your CVO today?
Post by: Opossum on April 14, 2014, 03:06:43 PM
Looks just like you
SOooo jus for clarity sake...this is me on the right color, BLUE!
Title: Re: What did you do to or on your CVO today?
Post by: Twism_23 on April 14, 2014, 03:09:12 PM
Picked up my heads after they were milled and new springs guides and intake valves we're installed. I'm getting ready to install tomorrow. Hopefully have the whole thing buttoned up by evening. Regrettably nobody up here is running their Dyno yet as it's still too cold.
Title: Re: What did you do to or on your CVO today?
Post by: denis on April 14, 2014, 05:40:00 PM
rode mine saturday but still have problems with radio front speckers and cracking
Title: Re: What did you do to or on your CVO today?
Post by: YELLOWBIRD on April 15, 2014, 08:33:20 AM
Ordered the new Fullsac 2.5 "Power Cores" and Baffle Screens.

Already have the 2.25" baffles, just wanted something different and a bit louder!


 :bananarock:

YB
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on April 15, 2014, 09:31:39 AM
Ordered the new Fullsac 2.5 "Power Cores" and Baffle Screens.

Already have the 2.25" baffles, just wanted something different and a bit louder!


 :bananarock:

YB
Hell yeah!

Sent from my SCH-R970 using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: Lever on April 15, 2014, 09:08:09 PM
Install new Arlene Ness horn that matches my air cleaner and fans
Title: Re: What did you do to or on your CVO today?
Post by: Para Bellum on April 16, 2014, 12:23:46 AM
It is a pretty awesome bag...  :2vrolijk_21:

Saddleman S2200E: Only sucky part is the rain cover, which doesn't fit over the bag when it's "expanded". Go figure.
http://www.saddlemen.com/products/k2mart/bags-luggage/sissy-bar-bags/s2200e-expandable-sissy-bar-bag.html

(http://ridingtwoup.files.wordpress.com/2013/09/1070788-129slayer.jpg?w=900)

I thought he was talking about the one in front of the backrest.   ;)   :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: 2k on April 16, 2014, 06:28:04 AM
I thought he was talking about the one in front of the backrest.   ;)   :nixweiss:

He was, but the travel bag is nice too!!
Title: Re: What did you do to or on your CVO today?
Post by: 110Mofo on April 16, 2014, 08:24:31 AM
Mock up of a solo setup, I hope to have it complete soon. I still need speaker pods.
Title: Re: What did you do to or on your CVO today?
Post by: 110Mofo on April 16, 2014, 08:27:16 AM
 ;D
Title: Re: What did you do to or on your CVO today?
Post by: 2k on April 16, 2014, 11:48:15 AM
Mock up of a solo setup, I hope to have it complete soon. I still need speaker pods.

Looks great, I think the front fairing must make the difference......not wild about how the SERK looks Solo.
(http://www.cvoharley.com/smf/index.php?action=dlattach;topic=89705.0;attach=261768;image)
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on April 16, 2014, 01:03:27 PM
....................not wild about how the SERK looks Solo.

and that is one of the reasons why I traded the 13 SERK for the 13 SEUC


Title: Re: What did you do to or on your CVO today?
Post by: 2k on April 17, 2014, 08:27:59 AM
and that is one of the reasons why I traded the 13 SERK for the 13 SEUC

I hear you loud and clear..........thats why I am still flip floping!! IMO, the SERK is more fun to ride, but at what cost? One of the hardest times is when the Kid comes around me on the built CUSE and there ain't nuttin' I can do bout it.
Title: Re: What did you do to or on your CVO today?
Post by: cambo on April 17, 2014, 08:55:42 AM
I hear you loud and clear..........thats why I am still flip floping!! IMO, the SERK is more fun to ride, but at what cost? One of the hardest times is when the Kid comes around me on the built CUSE and there ain't nuttin' I can do bout it.

Tell him you want to ride the CUSE and if he says no pull the parent card and tell him he is grounded. That's what i'd (attempt) to do!!
Title: Re: What did you do to or on your CVO today?
Post by: OBB on April 18, 2014, 12:50:20 PM
Hayden tensioner and clutch wiz going in.

Sent from my DROID RAZR HD using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: phato1 on April 18, 2014, 06:35:25 PM
Hayden tensioner and clutch wiz going in.

Sent from my DROID RAZR HD using Tapatalk

Is Burt Reynolds helping you with the install, or is that your TA in the background?
Title: Re: What did you do to or on your CVO today?
Post by: OBB on April 18, 2014, 07:06:08 PM
Is Burt Reynolds helping you with the install, or is that your TA in the background?
my buddy owns a body shop and wasn't using his lift today. That's one of his toys you see there. '79 with the 4.9 turbo

Sent from my DROID RAZR HD using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: mnrider on April 19, 2014, 01:59:21 AM
I put on a new brake pedal and floor board spacers from Softbrake. It made a world of difference for me. Now I can hit the brake without lifting my leg. I also put on a new windshield from Freedom Shields. Hat my exhaust and header pipes put on two days ago. I'm ready to put some miles on now!
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on April 19, 2014, 07:19:37 AM
The Hayden is a great add on.  You wii love how the bike will smooth out.  That hd stock tensioner really sucks if you ask me.   :nixweiss:       Recently I added the hd extended rear brake lever.  Very comfy and makes using the rear brake so much easier.  I don't have to move my foot much also.  :)
Title: Re: What did you do to or on your CVO today?
Post by: Fireguy on April 19, 2014, 08:52:14 AM


Do you know if the extended brake lever will fit 2014 cvo limiteds?
Title: Re: What did you do to or on your CVO today?
Post by: OBB on April 19, 2014, 05:54:46 PM
The Hayden is a great add on.  You wii love how the bike will smooth out.  That hd stock tensioner really sucks if you ask me.   :nixweiss:       Recently I added the hd extended rear brake lever.  Very comfy and makes using the rear brake so much easier.  I don't have to move my foot much also.  :)
I did notice a difference right away and I thought I read that a few miles might be needed to seat in the chain. Much better and quieter. As far as the extended heel shifter, I had one of those within two months of owning the bike. I dropped it down one notch so when I want to find neutral real easy I just use that one. The heel of my boot will line up the shifter even with my floorboard perfectly to find neutral.

Sent from my DROID RAZR HD using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: mnrider on April 20, 2014, 02:04:13 AM

Do you know if the extended brake lever will fit 2014 cvo limiteds?

I have a 2014 Limited. Here is the new extended brake pedal and 1 inch floor board extenders installed.

Title: Re: What did you do to or on your CVO today?
Post by: chiefs584ever on April 20, 2014, 07:12:53 AM
I rode it!!!!!!

Sent from my SCH-R950 using Tapatalk 2

Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on April 20, 2014, 07:49:07 AM
Sent my radio to Iron Cross radio in New Jersey.   I had the blue tooth upgrade installed. Got it back in the other day and gave it a good work out yesterday.    Really works well.   Now I can have Pandora, my down loaded music and anything else offered on my Droid phone. I love that no cable is needed to the aux jack on the front.    Stuart.
Title: Re: What did you do to or on your CVO today?
Post by: willyB on April 20, 2014, 07:52:18 AM
A few buddies and I decided to go bug hunting. After about 7 hours we finally bagged our limit.

One buddy on his Deuce decided to hunt them with his face and chest.
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on April 20, 2014, 08:07:09 AM
A few buddies and I decided to go bug hunting. After about 7 hours we finally bagged our limit.

One buddy on his Deuce decided to hunt them with his face and chest.




x2 on the bug hunt!


Wife and I and about 35 friends went on a 250 mile hunt yesterday.  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on April 20, 2014, 08:41:51 AM
A few buddies and I decided to go bug hunting. After about 7 hours we finally bagged our limit.

One buddy on his Deuce decided to hunt them with his face and chest.

Same here a went up the river road on the MO side and came back on the IL river road with a couple friends.  Not sure what the limit is on bugs, but we found our share.
Title: Re: What did you do to or on your CVO today?
Post by: hawkeye4jw on April 20, 2014, 02:04:01 PM
Rode to Rockford and back and only caught 5 bugs

Jack
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on April 20, 2014, 03:03:19 PM
Going for a ride, no time to jabber!  :bananarock:
Title: Re: What did you do to or on your CVO today?
Post by: spada84 on April 20, 2014, 09:37:58 PM
Installed the Akrapovic mufflers.  Pictures tomorrow.
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on April 20, 2014, 10:14:08 PM
Installed the Hayden Tensioner, kinda by circumstance. Installed a new compensator about a month and 2000 miles ago. As I posted, the deal was fantastic and warranted it for me (including a clutch basket with my Barnett Scorpion cloth installed in it) even though I put in a 120r around 7500 miles ago. They have been more than fair (maybe even unfair to my advantage) with me since the beginning even though I went out of state to buy my bike. A couple of weeks ago I noticed a knocking sound coming from my primary at slow idol. My warranty runs out on April 24th so i took it in and they broke down the entire tranny (under warranty) and even tried putting another compensator and primary chain in it so that everything would be new. When they told me they were going to do that for me I told them to go ahead and install the Hayden partly because I was actually starting to feel like a mooch and thought I could at least give them some work that I would pay for plus was hoping that with all of that the knocking sound would go away.
Good news is though I really didn't have any complaints about the shifting or finding neutral, it definitely shifts even smoother now and is cool how it "clicks" into gears which makes me feel like I didn't just throw away money on a mod I wasn't looking to do. Bad news is at cold start up, it still has the "knock" though it will only do it for less then a couple of seconds and then goes away. I have only put a couple of hundred miles on since I got it back on Friday and it never did it after it was warm but I am hoping as the primary chain "breaks in" it doesn't start doing it like before.
Didn't mean to ramble, the Hayden is great...
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on April 21, 2014, 02:15:29 AM
I agree.  The Hayden makes a big improvement all around the primary.  I'm glad I put one in also,   Stuart.
Title: Re: What did you do to or on your CVO today?
Post by: ffltjeff on April 21, 2014, 03:01:31 PM
Got my Progressive Suspension installed, went with the 444s and the cartridge kit.  Was not sure what to expect, bumps seem a little harsher at low speed but smooth out at higher speed.  Bike does not feel like it wallows around curves now it feels more stable.  So far I am happy with it, I think I just need to find the sweet spot setting for the rear shocks yet and then I am sure it will smooth out more around town
Title: Re: What did you do to or on your CVO today?
Post by: willyB on April 22, 2014, 07:11:19 AM
On Easter I took my son in laws Mom for her very first ride EVER on a motorcycle. Just a quick ride down the subdivision street before I noticed she had on flip flops. Turned around and came back.

Her husband of 50 years passed away last fall and she's still been a little down. But by all the laughing on the back I think the CVO made her day.

She told her kids that a new Harley is on her Christmas list.
Title: Re: What did you do to or on your CVO today?
Post by: cambo on April 22, 2014, 07:15:07 AM
On Easter I took my son in laws Mom for her very first ride EVER on a motorcycle. Just a quick ride down the subdivision street before I noticed she had on flip flops. Turned around and came back.

Her husband of 50 years passed away last fall and she's still been a little down. But by all the laughing on the back I think the CVO made her day.

She told her kids that a new Harley is on her Christmas list.
That's a fantastic shot! Shows how she felt about the ride. One more convert!! :)
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on April 22, 2014, 08:04:21 AM
On Easter I took my son in laws Mom for her very first ride EVER on a motorcycle. Just a quick ride down the subdivision street before I noticed she had on flip flops. Turned around and came back.

Her husband of 50 years passed away last fall and she's still been a little down. But by all the laughing on the back I think the CVO made her day.

She told her kids that a new Harley is on her Christmas list.




 :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on April 22, 2014, 08:11:08 AM
Willy, what a great picture (flipflops or not...  :) ).....made my morning  ;D
Title: Re: What did you do to or on your CVO today?
Post by: knothead on April 22, 2014, 02:26:54 PM
Installed a new Corbin solo seat..
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on April 22, 2014, 06:09:44 PM
Willy, what a great picture (flipflops or not...  :) ).....made my morning  ;D

I agree  :2vrolijk_21: That photo is priceless!
Title: Re: What did you do to or on your CVO today?
Post by: 2k on April 22, 2014, 09:47:55 PM
Installed a new Corbin solo seat..
I love the way it looks, post how it does on a 300mi day, if close to how it looks, its on my list!!
Title: Re: What did you do to or on your CVO today?
Post by: Timusa on April 23, 2014, 03:49:09 AM
I put on the rear saddlebag guards and took her for a ride on Czech Route 66.
Guards are a part number 90200791. Very happy with them.
Title: Re: What did you do to or on your CVO today?
Post by: Digital on April 23, 2014, 08:08:52 AM
Great pic of the bike!    It does look good!
Title: Re: What did you do to or on your CVO today?
Post by: 110tHunDer on April 24, 2014, 11:14:59 PM
 
Finally got her out of the "hole" she's been living in for the past 6+ months!  C'mon RibFest! :huepfenjump3:

(http://img.photobucket.com/albums/v321/weissbc/Car%20and%20Motorcycle%20Pics/SEUC/B7268AA4-F11F-4DC7-8E59-8569487A173A.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on April 25, 2014, 08:05:46 AM

...........................  C'mon RibFest! :huepfenjump3:

I hear ya! 
Title: Re: What did you do to or on your CVO today?
Post by: The Mysterious Q! on April 25, 2014, 08:11:15 AM
Changed the rear tire and waxed it. That's what I did on my CVO.
Title: Re: What did you do to or on your CVO today?
Post by: YELLOWBIRD on April 25, 2014, 08:11:54 AM
I installed Fullsac's new 2.5" CVO Baffles!!!

Simply Awesome!


 :bananarock:


YB
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on April 25, 2014, 08:59:44 AM
I installed Fullsac's new 2.5" CVO Baffles!!!

Simply Awesome!


 :bananarock:


YB



Sent from my SCH-R970 using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: Rooster on April 25, 2014, 11:29:36 AM
I put on the rear saddlebag guards and took her for a ride on Czech Route 66.
Guards are a part number 90200791. Very happy with them.
Looks like you have to watch out for those speed bumps next to your back tire :'(
Title: Re: What did you do to or on your CVO today?
Post by: 110Mofo on April 25, 2014, 12:10:54 PM
 Finally , It only took them 5 yrs to come out with a Granit version  :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: acevtwin on April 25, 2014, 02:03:54 PM
I never could find the Factory 11' or 12' CVO Convertible Fairing mount speaker system for sale so I went ahead and bought the "Boom Audio". Works good.
Title: Re: What did you do to or on your CVO today?
Post by: acevtwin on April 25, 2014, 02:06:20 PM
And Riders Claw also.
Title: Re: What did you do to or on your CVO today?
Post by: 2010Convertable on April 25, 2014, 03:35:14 PM
Looks good on the bike. I also have a 2010 Convertible and thinking about doing the same thing.... :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Digital on April 25, 2014, 04:54:26 PM
Picked the bike up from the shop with some new bars.   Didnt care that it was 45 degrees and raining.   Have to go back to get a fitting on the right side sorted out but am really happy with the end result.

(http://i1239.photobucket.com/albums/ff505/Digital1976/A8E7FDE2-DF44-42AF-8EA6-9030B76295D6_zpsi8mdkogz.jpg) (http://s1239.photobucket.com/user/Digital1976/media/A8E7FDE2-DF44-42AF-8EA6-9030B76295D6_zpsi8mdkogz.jpg.html)

(http://i1239.photobucket.com/albums/ff505/Digital1976/FF156B2E-54DB-489E-A1BD-FC6422136706_zpsoml8ya1h.jpg) (http://s1239.photobucket.com/user/Digital1976/media/FF156B2E-54DB-489E-A1BD-FC6422136706_zpsoml8ya1h.jpg.html)
Title: Re: What did you do to or on your CVO today?
Post by: T-Roy on April 25, 2014, 05:56:46 PM
Made some mods today. Chrome saddlebag latches that I painted the grooved lines with rustoleum cobalt blue metallic. Custom Dynamics aux lights with chrome caliper mounts. Revolver horn cover nut. I have and LED Daymaker on the way from Kutter along with a chrome airwing rack with smoked LED.
Title: Re: What did you do to or on your CVO today?
Post by: T-Roy on April 25, 2014, 05:58:12 PM
Latch insert close up
Title: Re: What did you do to or on your CVO today?
Post by: T-Roy on April 25, 2014, 05:59:14 PM
aux lights
Title: Re: What did you do to or on your CVO today?
Post by: T-Roy on April 25, 2014, 06:00:02 PM
aux light close
Title: Re: What did you do to or on your CVO today?
Post by: T-Roy on April 25, 2014, 06:00:54 PM
aux lights lit
Title: Re: What did you do to or on your CVO today?
Post by: T-Roy on April 25, 2014, 06:02:11 PM
horn cover nut
Title: Re: What did you do to or on your CVO today?
Post by: T-Roy on April 26, 2014, 03:55:56 PM
How'd you go about doing the paint?  Looks good.

First I removed the little black plastic pieces out of the grooves, they popped right out with an eyeglass screwdriver. Then I covered the insert with painters tape and cut out the grooves with an exacto knife and sprayed them with the rustoleum cobalt blue metallic. This did pretty good but the tape had creeped into the edges of the grooves a little bit in some places. So I gave them one more coat without any tape on them at all and immediately wiped the chrome surface with a paper towel dampened with nail polish remover. There are still some places that could use a little touch up so I am thinking about getting a pinstriping brush, spraying the brush and doing the touch up, with the nail polish remover at the ready.
Title: Re: What did you do to or on your CVO today?
Post by: RoadMonkey on April 26, 2014, 04:22:27 PM
Latch insert close up
it's all looking good!  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: rheiner on April 26, 2014, 04:30:34 PM
Picked the bike up from the shop with some new bars.   Didnt care that it was 45 degrees and raining.   Have to go back to get a fitting on the right side sorted out but am really happy with the end result.

(http://i1239.photobucket.com/albums/ff505/Digital1976/A8E7FDE2-DF44-42AF-8EA6-9030B76295D6_zpsi8mdkogz.jpg) (http://s1239.photobucket.com/user/Digital1976/media/A8E7FDE2-DF44-42AF-8EA6-9030B76295D6_zpsi8mdkogz.jpg.html)

(http://i1239.photobucket.com/albums/ff505/Digital1976/FF156B2E-54DB-489E-A1BD-FC6422136706_zpsoml8ya1h.jpg) (http://s1239.photobucket.com/user/Digital1976/media/FF156B2E-54DB-489E-A1BD-FC6422136706_zpsoml8ya1h.jpg.html)

Do you have a 90 degree fitting on the clutch and a 180 degree on the brake?
Title: Re: What did you do to or on your CVO today?
Post by: cudacurlee on April 26, 2014, 08:48:24 PM
Pushed it around my workshop to get towed!!!!
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on April 26, 2014, 08:52:09 PM
Towed??  That doesn't sound good...

Sent from my SCH-I545 using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: cambo on April 27, 2014, 04:02:04 AM
Went for a short ride. Winter snow is fast becoming a distant memory...

(https://farm8.staticflickr.com/7431/14023626215_c36c1376ce_c.jpg) (https://flic.kr/p/nndKuT)
Title: Re: What did you do to or on your CVO today?
Post by: YELLOWBIRD on April 27, 2014, 07:53:31 AM
Did the OBX Bike Week.

Largest crowd that I have seen in awhile. What a great ride down with good folks!


YB
Title: Re: What did you do to or on your CVO today?
Post by: hawkeye4jw on April 27, 2014, 02:40:13 PM
 Added some Black Crash Bars today.

Jack
Title: Re: What did you do to or on your CVO today?
Post by: OBB on April 27, 2014, 03:36:21 PM
Finally got my rear fascia installed.  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on April 27, 2014, 05:51:18 PM
............................. Oh yeah, new rule: Miss Debbie now dismounts before I back-up the bike.






x2 Learned that lesson a long time ago backing a loaded down Ultra Classic plus the wife. My experience ended with scars to the bike though. Glad you both didn't get hurt.
Title: Re: What did you do to or on your CVO today?
Post by: Hx2 on April 27, 2014, 08:11:53 PM
Ride to Cedar Key for the weekend followed by 5K service and new Daymaker headlight and aux lights. Like the look.
Title: Re: What did you do to or on your CVO today?
Post by: dahsen on April 27, 2014, 09:05:42 PM
Installed backrest for wife and went to try it on the road...........  One mile, then rain.   >:(

Snow... Cold... Work... Rain... Snow... Cold... Work... Rain...

2014...    :soapbox:
Title: Re: What did you do to or on your CVO today?
Post by: Digital on April 27, 2014, 09:07:04 PM
Do you have a 90 degree fitting on the clutch and a 180 degree on the brake?   - yes. The dealer is ordering the part and will install it.   I wanted to ride the bike in the meantime. 
Title: Re: What did you do to or on your CVO today?
Post by: T-Roy on April 27, 2014, 09:09:59 PM
Mounted my new camera and went for a ride. It was a nice day.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on April 27, 2014, 09:31:12 PM
Mounted my new camera and went for a ride. It was a nice day.
interesting. What is that?

Sent from my SCH-R970 using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: T-Roy on April 27, 2014, 10:09:51 PM
interesting. What is that?

Sent from my SCH-R970 using Tapatalk

That is a JVC Adixxion camera mounted on a techmount handlebar mount with a 3 inch extension.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on April 28, 2014, 12:48:19 AM
That is a JVC Adixxion camera mounted on a techmount handlebar mount with a 3 inch extension.
Very nice. Have you posted any videos?

Sent from my SCH-R970 using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: phato1 on April 28, 2014, 01:02:41 PM
I mounted my adixxion on the left side of the handlebars.  I too would be interested in seeing a video shot from your cameras perspective. The video from mine came out nicely with little to no vibration, great viewing angle and no distortion at all.

Sent from my SCH-I545 using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: Timusa on April 28, 2014, 03:59:10 PM
Great pic of the bike!    It does look good!

Thanks bro!
Title: Re: What did you do to or on your CVO today?
Post by: T-Roy on April 28, 2014, 04:20:41 PM
I mounted my adixxion on the left side of the handlebars.  I too would be interested in seeing a video shot from your cameras perspective. The video from mine came out nicely with little to no vibration, great viewing angle and no distortion at all.

Sent from my SCH-I545 using Tapatalk

I have not posted anything yet. Used it for the first time yesterday. I am gonna have to figure out how to do the editing and such.
Title: Re: What did you do to or on your CVO today?
Post by: Digital on April 28, 2014, 04:25:33 PM
I'm using it as my Wallpaper on my PC Timusa.   Do you have any more pics?


Title: Re: What did you do to or on your CVO today?
Post by: phato1 on April 28, 2014, 04:25:56 PM
Editing can be a challenge for those of us who aren't tech savy. I've been using windows live movie maker since it seems to work with my windows 8 OS.

Sent from my SCH-I545 using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: T-Roy on April 28, 2014, 09:11:08 PM
You don't have to have a GoPro to use GoPro Studio 2.0 and I've found it to be very easy to use and not overly time consuming for splicing clips from raw digital into a movie with music, text overlays, etc.   The trick for me was finding a GoPro mega-geek's site where he produced a series of videos that take you through the basics in about 20 minutes.  There are hours of additional "tips" but just to get going the first four or so are all you need.  The written instructions are about worthless.

http://www.youtube.com/playlist?list=PLhceDTg-JOm9WNiZshpL7q8pb9m3tiXP3 (http://www.youtube.com/playlist?list=PLhceDTg-JOm9WNiZshpL7q8pb9m3tiXP3)

Thanks I downloaded something called video pad and did some editing with it. It was fairly easy to figure out. Here are my results. Remember this is my first one so yall be gentle. LOL Next time I am going to move the mount up some and hopefully catch less of the front tire. Its good to figure all of this out before my trip to the Texas Hill Country in late May.

The highway aint the Dragon or the Beartooth but it aint bad for being a few miles from home.
http://youtu.be/7saN9gk1Q6o
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on April 28, 2014, 09:45:17 PM
Very nice. That camera angle isn't bad  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on April 28, 2014, 09:52:42 PM
I like it. Thanks for sharing.

Sent from my SCH-R970 using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: T-Roy on April 28, 2014, 09:59:47 PM
Your welcome and thanks for the compliments guys. By the way if anyone is ever headed to New Orleans from the west, Highway 22 is a great backroad route alternative.
Title: Re: What did you do to or on your CVO today?
Post by: FLY-DOG on April 29, 2014, 08:52:45 AM
Thanks I downloaded something called video pad and did some editing with it. It was fairly easy to figure out. Here are my results. Remember this is my first one so yall be gentle. LOL Next time I am going to move the mount up some and hopefully catch less of the front tire. Its good to figure all of this out before my trip to the Texas Hill Country in late May.

The highway aint the Dragon or the Beartooth but it aint bad for being a few miles from home.
http://youtu.be/7saN9gk1Q6o

Personally I like where you have the camera mounted, the front wheel gives a visual perspective of the ride more than if all we saw was the scenery in front of you.
Title: Re: What did you do to or on your CVO today?
Post by: Hx2 on April 29, 2014, 01:31:34 PM
Currently installing new lifters, daymakers and CD turn signals, along with a complete service.  Pulled the old lifters out last night, and luckily they are like new.  Bike has about 6600 miles.  Put the S&S Premium Lifters in last night but still have a bit of work to do putting the engine/bike back together.  New daymakers are in and look great...still need to do the turn signals.  Great time to do some deep cleaning of the bike also and make it like new.  Have to be ready for a week long trip in June up throught the Northeast.
Title: Re: What did you do to or on your CVO today?
Post by: HRider on April 29, 2014, 06:36:48 PM
Hopefully will be picking this up.
(http://i538.photobucket.com/albums/ff346/grcplaya/0428140834a_zpsl9xhxlhv.jpg) (http://s538.photobucket.com/user/grcplaya/media/0428140834a_zpsl9xhxlhv.jpg.html)
(http://i538.photobucket.com/albums/ff346/grcplaya/imagejpeg_0_zpssnzeke9e.jpg) (http://s538.photobucket.com/user/grcplaya/media/imagejpeg_0_zpssnzeke9e.jpg.html)
(http://i538.photobucket.com/albums/ff346/grcplaya/Fender%202_zps45yc6eqe.jpg) (http://s538.photobucket.com/user/grcplaya/media/Fender%202_zps45yc6eqe.jpg.html)
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on April 29, 2014, 10:54:28 PM
Personally I like where you have the camera mounted, the front wheel gives a visual perspective of the ride more than if all we saw was the scenery in front of you.
Video is good but how do you have the patience to stay behind that car so long? Would drive me insane..
Title: Re: What did you do to or on your CVO today?
Post by: T-Roy on April 30, 2014, 07:46:35 AM
Video is good but how do you have the patience to stay behind that car so long? Would drive me insane..

LMAO I knew someone would ask that question. It drove me insane also. There were several bikes following me that did not know how to get where we were going and I did not want to lose any of them. That car was slowing down and speeding up so much I don't think they knew where they were going either!!
Title: Re: What did you do to or on your CVO today?
Post by: cambo on April 30, 2014, 08:25:45 AM
Replaced the stock seat (which is still the best looking and possibly most uncomfortable seat for a BO) with the Danny Gray solo seat in anticipation of the long rides this summer.
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on April 30, 2014, 04:24:58 PM
Replaced the stock seat (which is still the best looking and possibly most uncomfortable seat for a BO) with the Danny Gray solo seat in anticipation of the long rides this summer.

Great looking seat Cam, let us know how it performs.
Title: Re: What did you do to or on your CVO today?
Post by: D-N-D on April 30, 2014, 05:13:32 PM
Very Nice Seat Brother !!!!
Title: Re: What did you do to or on your CVO today?
Post by: cambo on April 30, 2014, 05:20:27 PM
Thanks guys. After a couple 300 mile rides caused severe assoditis(?) I figured looks aren't everything when it comes to bike seats! I wish I could tell you if the DG seat makes a difference ride-comfort-wise but we have had the monsoons for the past 3 days. I'll report back as soon as the weather allows. For now, I am pleasantly surprised that the seat looks much, much better than I expected.
Title: Re: What did you do to or on your CVO today?
Post by: Gettinold on April 30, 2014, 09:11:02 PM
Gettin them ready to sell!  :-X
Title: Re: What did you do to or on your CVO today?
Post by: Chubby on May 02, 2014, 05:17:54 AM
We bowed our heads and asked the sweet lord above for nice weather, in michigan we went from non stop snow to constant rain
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on May 02, 2014, 07:32:40 AM
Gettin them ready to sell!  :-X




Oh man that sucks. That is a sweet looking SERG there.
Title: Re: What did you do to or on your CVO today?
Post by: Digital on May 02, 2014, 09:09:11 AM
Hopefully will be picking this up.
(http://i538.photobucket.com/albums/ff346/grcplaya/0428140834a_zpsl9xhxlhv.jpg) (http://s538.photobucket.com/user/grcplaya/media/0428140834a_zpsl9xhxlhv.jpg.html)
(http://i538.photobucket.com/albums/ff346/grcplaya/imagejpeg_0_zpssnzeke9e.jpg) (http://s538.photobucket.com/user/grcplaya/media/imagejpeg_0_zpssnzeke9e.jpg.html)
(http://i538.photobucket.com/albums/ff346/grcplaya/Fender%202_zps45yc6eqe.jpg) (http://s538.photobucket.com/user/grcplaya/media/Fender%202_zps45yc6eqe.jpg.html)

That is gorgeous.   Who did the work and if you dont mind, send me a PM so I can get an idea what something like this costs - the paint alone must be super expensive.

Liking the direction you are taking that bike.   Thanks for the inspiration HRider!!!
Title: Re: What did you do to or on your CVO today?
Post by: acevtwin on May 02, 2014, 09:39:17 AM
Gettin them ready to sell!  :-X
I know the Pumpkin sold about the same time I sold mine. Are you selling the Roadglide now?
Title: Re: What did you do to or on your CVO today?
Post by: Timusa on May 03, 2014, 08:40:59 AM
Went to Vroomshoop, Netherland, and bought an orange 2014 SERK for my friend. 800 km from home (500 mi) was closest I could find. Could have gotten a grey one cheaper but he only considered orange.
Started at 16–30 and was back home 01-00 in the morning. Most of riding time in the rain. Found the stock seat to be OK. Found my new helmet to be PERFECT.
I highly recommend the dealership in Vroomshoop (what a name for town!) if you happen to be there. Family run for 3 generations. Nice people and lots of goods!

Title: Re: What did you do to or on your CVO today?
Post by: Timusa on May 03, 2014, 09:09:49 AM
Yesterday evening put on the Daymaker Reflector headlight and mirrors with LED turn indicators, same as I have on my bike.
Was not happy about having to cut off connectors and splicing wires. Funny thing is that the dealership offered me adapter harness (part nr 69200897) and the connector on the harness was ALSO WRONG!
I don't know WHO they make this for. All the 2014 HDI bikes sold here come with either projector type Daymaker or dual halogen headlight. The harness is useless in both cases.
I have no prob splicing four wires but come on, they sell this lamp for 500 euros here!
Title: Re: What did you do to or on your CVO today?
Post by: Timusa on May 03, 2014, 09:11:47 AM
The result. Did not try it on the street at night yet, will report tomorrow.
Title: Re: What did you do to or on your CVO today?
Post by: skratch on May 03, 2014, 12:05:28 PM
nothing as major as some of you guys, but i went from this:

(http://i167.photobucket.com/albums/u123/skratchster/Mobile%20Uploads/photo_zps6d6c3a7d.jpg) (http://s167.photobucket.com/user/skratchster/media/Mobile%20Uploads/photo_zps6d6c3a7d.jpg.html)

to this:

(http://i167.photobucket.com/albums/u123/skratchster/Mobile%20Uploads/photo_zpsd1ff23b4.jpg) (http://s167.photobucket.com/user/skratchster/media/Mobile%20Uploads/photo_zpsd1ff23b4.jpg.html)

using the innovative storage solutions, in-the-bag (4).  same set you can get from eglide goodies, only direct from them, it's $10 cheaper.  to be fair, i noticed that i didn't have the little bag with the air pump and gauge back in the bag yet when i took the pic.  but there is still a ton more room.  the only downside is that it doesn't fit quite the same way that it would if the bags weren't extended.  the regular bags it'll sit flat, but with the extended bags, the bottom of the bag is curved where the cutout for the exhaust is, so it sits a little crooked, and of course, the amp on the other side.  good thing the double sided tape that the moco uses to hold that amp in is not that great.  i just slid the amp up, put the bag in, then slid the amp down again.  it's still worth the $60, imo.....  i'll at least be able to put the saddle bag liner in when we go on a trip now.
Title: Re: What did you do to or on your CVO today?
Post by: Gettinold on May 03, 2014, 12:43:39 PM
I know the Pumpkin sold about the same time I sold mine. Are you selling the Roadglide now?
Ace I still have the Pumpkin and I'm considering on selling the SERG & SEVROD as a package, a
CVO starter kit!!  ;D
Title: Re: What did you do to or on your CVO today?
Post by: mannyr on May 03, 2014, 03:50:00 PM
Hey. So as much as I like my painted windshield. Klock Werks 8 inch.  All that windshield does is look good..  No protection at all as least for me.
Title: Re: What did you do to or on your CVO today?
Post by: mannyr on May 03, 2014, 03:51:14 PM
So went back to old reliable 14 in. Windvest in smoke. Does the job.
Title: Re: What did you do to or on your CVO today?
Post by: mannyr on May 03, 2014, 03:52:41 PM
Here's some pics.
Title: Re: What did you do to or on your CVO today?
Post by: mannyr on May 03, 2014, 03:53:29 PM
Another pic
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on May 03, 2014, 07:48:55 PM
Ace I still have the Pumpkin and I'm considering on selling the SERG & SEVROD as a package, a
CVO starter kit!!  ;D
Damn... you tempting me... if it weren't for the "honey do's" and me trying to get ready to retire... :(

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: Foot Loose on May 03, 2014, 09:26:40 PM
Amber lens covers
Title: Re: What did you do to or on your CVO today?
Post by: CVO2FIXUP on May 03, 2014, 09:34:05 PM
Went to Vroomshoop, Netherland, and bought an orange 2014 SERK for my friend. 800 km from home (500 mi) was closest I could find. Could have gotten a grey one cheaper but he only considered orange.
Started at 16–30 and was back home 01-00 in the morning. Most of riding time in the rain. Found the stock seat to be OK. Found my new helmet to be PERFECT.
I highly recommend the dealership in Vroomshoop (what a name for town!) if you happen to be there. Family run for 3 generations. Nice people and lots of goods!


  Hey If become a friend of yours, can I get a ROAD KING from Vroomshoop as well?  :orange:
Title: Re: What did you do to or on your CVO today?
Post by: CVO2FIXUP on May 03, 2014, 09:37:49 PM
 Did a bunch of small upgrades over the last few weeks.  Got rid of the PC5, and replaced it with the Power Vision, and mounted it. ( just need to dyno shtine the bike next week ) RSD air cleaner, and remover the tour pack rack.  Very happy with the way all the mods turned out. Love the bike with out the rack.  Check .
Title: Re: What did you do to or on your CVO today?
Post by: CVO2FIXUP on May 03, 2014, 09:38:55 PM
 another
Title: Re: What did you do to or on your CVO today?
Post by: CVO2FIXUP on May 03, 2014, 09:39:48 PM
 Another
Title: Re: What did you do to or on your CVO today?
Post by: CVO2FIXUP on May 03, 2014, 09:40:35 PM
 Another
Title: Re: What did you do to or on your CVO today?
Post by: Ghost Rider on May 03, 2014, 09:41:02 PM
Twolane and I escorted Susan to Spyderfest 2014. It was a Hoot. No wait Hondas have Hoots. This was a soirée  (http://img.tapatalk.com/d/14/05/04/hususa2a.jpg)


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: CVO2FIXUP on May 03, 2014, 09:41:44 PM
Another
Title: Re: What did you do to or on your CVO today?
Post by: CVO2FIXUP on May 03, 2014, 09:42:48 PM
 And a shot of the bike with no rack.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on May 03, 2014, 10:03:09 PM
And a shot of the bike with no rack.
That is one sharp looking bike  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: cambo on May 04, 2014, 03:33:52 PM
Spend the weekend in Charlottesville, VA and rode around in VA wine country. Great friends, fantastic weather, lots of twisty roads, and no traffic!

Oh by the way, the Danny Gray solo BO seat is far, far superior to the stock seat comfort-wise and actually looks pretty good, too.

(https://farm6.staticflickr.com/5479/13920349258_9a2becec40_c.jpg) (https://flic.kr/p/nd6qRG)
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on May 04, 2014, 03:54:07 PM
Spend the weekend in Charlottesville, VA and rode around in VA wine country. Great friends, fantastic weather, lots of twisty roads, and no traffic!

Oh by the way, the Danny Gray solo BO seat is far, far superior to the stock seat comfort-wise and actually looks pretty good, too.

(https://farm6.staticflickr.com/5479/13920349258_9a2becec40_c.jpg) (https://flic.kr/p/nd6qRG)
No way!!!! Can't believe you come to my city and don't let me know!!! :bigcry:

(http://www.cvoharley.com/smf/index.php?action=dlattach;topic=67178.0;attach=201782;image)

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: cambo on May 04, 2014, 04:05:45 PM
Oh man! I had no idea you're in C'ville! What a beautiful town! Our daughter is enrolled at UVA and we are down there all the time. Next time I'm riding down there I'll let you know and hopefully you have time to meet up. The beer/wine/drink of your choice is on me!

Cam
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on May 04, 2014, 04:09:48 PM
Oh man! I had no idea you're in C'ville! What a beautiful town! Our daughter is enrolled at UVA and we are down there all the time. Next time I'm riding down there I'll let you know and hopefully you have time to meet up. The beer/wine/drink of your choice is on me!

Cam
10-4, no worries.... but you better be thirsty... second round is on me ;D... let me know when you're down again... and if you or your daughter need anything let me know (I have a few local/U.Va contacts ;)).

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: OBB on May 04, 2014, 04:16:26 PM
Washed it. I really need to tear it all apart and clean it really good. Didn't get a chance to do that this winter. :(

Sent from my DROID RAZR HD using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: cambo on May 04, 2014, 04:24:01 PM
10-4, no worries.... but you better be thirsty... second round is on me ;D... let me know when you're down again... and if you or your daughter need anything let me know (I have a few local/U.Va contacts ;)).

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Sounds like a plan and I am always thirsty! ;) See you soon.
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on May 04, 2014, 04:48:23 PM
Sounds like a plan and I am always thirsty! ;) See you soon.
:2vrolijk_21: You've got a PM.

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: cambo on May 04, 2014, 04:58:41 PM
:2vrolijk_21: You've got a PM.

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Received and responded.
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on May 04, 2014, 05:11:46 PM
Received and responded.
Got it :2vrolijk_21:

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: cambo on May 04, 2014, 08:37:46 PM
Another shot of my bike with Danny Gray Solo seat which I installed right before the VA vineyards trip over the past three days. As I said before it is a very comfortable seat. I rode for 500 miles and no problems with comfort at all. And as much as I think the stock seat looks better, the DG does look good and goes well with the lines on the bike.

(https://farm6.staticflickr.com/5159/14109163745_858a9c532c_c.jpg) (https://flic.kr/p/nuM9PT)

Cam
Title: Re: What did you do to or on your CVO today?
Post by: Timusa on May 05, 2014, 03:46:13 PM

  Hey If become a friend of yours, can I get a ROAD KING from Vroomshoop as well?  :orange:

LOL))) He gave me cash, I made it happen)
Title: Re: What did you do to or on your CVO today?
Post by: Timusa on May 05, 2014, 03:52:37 PM
Today I dyno'd both SERKs. Mine is red line, my friends stock bike – blue line.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on May 05, 2014, 05:49:13 PM
Today I dyno'd both SERKs. Mine is red line, my friends stock bike – blue line.

Man that's an ugly torque dip on the blue bike!
Title: Re: What did you do to or on your CVO today?
Post by: CVO2FIXUP on May 05, 2014, 06:36:38 PM
 Speaking of torque, 150 fpt??? From a 110???  Is it a diesel???
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on May 05, 2014, 06:39:58 PM
Speaking of torque, 150 fpt??? From a 110???  Is it a diesel???
Lmao I just noticed that!

Sent from my SCH-R970 using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: cambo on May 05, 2014, 06:53:19 PM
Speaking of torque, 150 fpt??? From a 110???  Is it a diesel???

I was thinking the same thing but ain't confident enough to question anything!  :-X
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on May 05, 2014, 08:16:35 PM
Speaking of torque, 150 fpt??? From a 110???  Is it a diesel???

Unless I'm confused 151 nm would convert to @111 Lb-ft
Title: Re: What did you do to or on your CVO today?
Post by: cambo on May 05, 2014, 08:20:49 PM
Unless I'm confused 151 nm would convert to @111 Lb-ft

nm? This is a Harley FPS! I thought using any metric measurements when it comes to HD is strictly verboten!
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on May 05, 2014, 08:27:27 PM
He is in Europe, so he's exempt from that rule. ;D
Title: Re: What did you do to or on your CVO today?
Post by: dahsen on May 05, 2014, 09:03:03 PM
Installed new Khrome Werks HP Plus slip-ons on my breakout.

Who the h... told me that these were not loud ?   :stunned:

Oh yeah, I remember.  That was on another forum, they were installed on a 96...

Love the low tone, they really cut the high and mids.  Question now is when will be my first "donation" with that bike.......   
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on May 09, 2014, 12:27:19 AM
Added a se agitator air cleaner kit.  Looks purrrrdy and matches the wheels  :).  I think I'm done now,,,just ask John Sachs.  :huepfenjump3:
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on May 09, 2014, 12:29:55 AM
Added a se agitator air filter kit.  Looks purrrrdy and matches the wheels  :).  I think I'm done now,,,just ask John Sachs.  :huepfenjump3:

LOL sure sure. Until tomorrow!  :P
Title: Re: What did you do to or on your CVO today?
Post by: davidw221 on May 09, 2014, 06:51:36 AM
Added an XM radio module to my Harley system. Can't wait till later today to try it out.
Title: Re: What did you do to or on your CVO today?
Post by: hawkeye4jw on May 09, 2014, 07:01:49 AM
 Had mine towed to the dealer yesterday. :~(  Clutch started disengaging when I stopped. Must have a bad seal. The fluid is contaminated and a dark grey color. Luckily I was only a couple blocks from where I was heading when it started acting up.

 Jack
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on May 09, 2014, 07:13:13 AM
Ordered the trucklite phase 7 headlight!

Sent from my SCH-R970 using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: dahsen on May 09, 2014, 09:03:06 AM
Had mine towed to the dealer yesterday. :~(  Clutch started disengaging when I stopped. Must have a bad seal. The fluid is contaminated and a dark grey color. Luckily I was only a couple blocks from where I was heading when it started acting up.

 Jack

Oh!  Would that be a Breakout ?  (Recall...... )
Title: Re: What did you do to or on your CVO today?
Post by: 2k on May 09, 2014, 02:27:46 PM
Added a few lights!! I know there are some on here that hate the extra lights. At least I will be able to see you give me the "Bird" as I go by.
Title: Re: What did you do to or on your CVO today?
Post by: cambo on May 09, 2014, 03:29:26 PM
Added a few lights!! I know there are some on here that hate the extra lights. At least I will be able to see you give me the "Bird" as I go by.

Looks awesome IMO. Just remember 'haters gonna hate', so...
When I grow up and bag me a bagger I need to get the info from you as to where and how.
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on May 09, 2014, 03:47:11 PM
Added a few lights!! I know there are some on here that hate the extra lights. At least I will be able to see you give me the "Bird" as I go by.


What are those lower side lights Jimmy?
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on May 09, 2014, 03:50:25 PM
Added a few lights!! I know there are some on here that hate the extra lights. At least I will be able to see you give me the "Bird" as I go by.

Lol Jimmy Freight train!

Sent from my SCH-R970 using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: 2k on May 09, 2014, 05:07:24 PM
Also added a drivers backrest, sent my riders backrest pad to Lonnie at Grasshopper.

 http://www.grasshopperlimited.com/harley-davidson-cvo-glide-series-also-roadking/


Title: Re: What did you do to or on your CVO today?
Post by: 2k on May 09, 2014, 05:08:15 PM
Here's what I got back.


Title: Re: What did you do to or on your CVO today?
Post by: 2k on May 09, 2014, 05:08:56 PM
From the back
Title: Re: What did you do to or on your CVO today?
Post by: 05Train on May 09, 2014, 05:21:50 PM
A few months ago I picked up a pair of locking doors for the lowers from a guy on HDF.  Since I have no desire to carry an extra key, I looked in to getting new locks or cores to match mine......Dealer quoted over $200, I said "screw that".  Bought a pair of pushbutton fuel lid latches and used them instead.  Now I have nice, sealed storage that I can access while I'm riding.

(http://img.tapatalk.com/d/14/05/10/e3a2ymat.jpg)

(http://img.tapatalk.com/d/14/05/10/u9uvyme7.jpg)


Sent from my iPad, probably while I'm pooping.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on May 09, 2014, 07:32:48 PM
A few months ago I picked up a pair of locking doors for the lowers from a guy on HDF.  Since I have no desire to carry an extra key, I looked in to getting new locks or cores to match mine......Dealer quoted over $200, I said "screw that".  Bought a pair of pushbutton fuel lid latches and used them instead.  Now I have nice, sealed storage that I can access while I'm riding.

(http://img.tapatalk.com/d/14/05/10/e3a2ymat.jpg)

(http://img.tapatalk.com/d/14/05/10/u9uvyme7.jpg)


Sent from my iPad, probably while I'm pooping.
Great idea Train!   :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: CVO City Lights on May 09, 2014, 10:57:42 PM
New Rear tire - Mich Commander 2.
http://www.cvoharley.com/smf/Smileys/CVO/drink.gif
Title: Re: What did you do to or on your CVO today?
Post by: hawkeye4jw on May 09, 2014, 11:36:34 PM
Oh!  Would that be a Breakout ?  (Recall...... )

2013 CVO Roadglide.

Jack
Title: Re: What did you do to or on your CVO today?
Post by: lowflight on May 10, 2014, 11:00:51 PM
Lights look good Jimmy.

Just in case: some states limit the number of "head" lights you can run, not sure of the logic there.
Title: Re: What did you do to or on your CVO today?
Post by: Kilaani on May 10, 2014, 11:22:20 PM
Lol Jimmy Freight train!

Sent from my SCH-R970 using Tapatalk
\\

Seriously, it does remind me of those Texas Trains I saw at night while I was road tripping to New Orleans!
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on May 11, 2014, 12:21:20 AM
\\

Seriously, it does remind me of those Texas Trains I saw at night while I was road tripping to New Orleans!



Sent from my SCH-R970 using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: Billy on May 11, 2014, 06:42:28 PM
made up prototype of bars. Will have them welded and ready for powder coat by Wed and install before Arkansas trip on Friday, I hope   Billy
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on May 11, 2014, 06:46:22 PM
Looking good. Boy that PVC pipe has a zillion uses. Can't wait to see them. Stuart.  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: acevtwin on May 12, 2014, 10:33:39 AM
Installed a Daymaker Headlight.
Title: Re: What did you do to or on your CVO today?
Post by: QSHOG on May 12, 2014, 12:52:53 PM
I installed a bagger brace. It made a big difference.
Title: Re: What did you do to or on your CVO today?
Post by: MrSurly on May 12, 2014, 01:48:10 PM
I added a D&D Boss Fat Cat to my CUSE5 (2010). Since I have the Power Vision along with its auto tune kit, I needed additional bungs for the other O2 sensors.
Welded them in and got it bolted up. Silly thing is LOUD.
Using the PV to make the tune changes. It must flow a lot more because, man it went super lean!(http://www.pbase.com/nufsed/image/155593991.jpg)
(http://www.pbase.com/nufsed/image/155593993.jpg)
(http://www.pbase.com/nufsed/image/155593996.jpg)
(http://www.pbase.com/nufsed/image/155602265.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: Kilaani on May 12, 2014, 08:37:29 PM
Yay, got new 2.5 Fullsac CVO cores, sound badass!!


Sent from my iPad using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on May 12, 2014, 08:44:28 PM
Kilaani.  Thought you were going with 2.25s.    What happened?
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on May 12, 2014, 09:52:36 PM
Kilaani.  Thought you were going with 2.25s.    What happened?

Haha go big or go home happened!

Sent from my SCH-R970 using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on May 12, 2014, 11:02:40 PM
i guess so,,, :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: Para Bellum on May 13, 2014, 02:19:18 AM
Installed the Big Sky Fan kit on the oil cooler.
Title: Re: What did you do to or on your CVO today?e
Post by: YELLOWBIRD on May 13, 2014, 08:07:13 AM
Haha go big or go home!!!!!


Alli can say is there is a BIG difference between the 2.25 & 2.50" CVO Power Cores!!!!

I don't like going home!!!!   :'(


YB
Title: Re: What did you do to or on your CVO today?
Post by: Fireguy on May 14, 2014, 09:06:07 AM
After a lot of thought I decided to change out the headpipe and add a tts tuner. Got an extra headpipe at the laughlin river run for free and cut the cat out.(Keeping the shock one just in case) With the help of Steve from Fullsac all went well and ready to ride.
There are a couple of post in regards to engine idle and oil temps that I will comment on as I put some miles on her.
And I love the fact that I can adjust the speedometer and make it read the acual speed I'm going.  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on May 15, 2014, 09:38:06 AM
Installed a phase 7 headlight.



Sent from my SCH-R970 using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on May 15, 2014, 09:42:45 AM
Installed a phase 7 headlight.
Sent from my SCH-R970 using Tapatalk

You will really like that, Jesse.  I had to adjust my mounting bracket to really take advantage of the new LED on Ginger.  I like my low beam a little bit higher than called for with the factory/halogen light.  The phase 7, once you get it set, will make you wonder why you waited so long.  Plus, with the look it has just sitting gives the bike a different look. 
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on May 15, 2014, 09:44:18 AM
You will really like that, Jesse.  I had to adjust my mounting bracket to really take advantage of the new LED on Ginger.  I like my low beam a little bit higher than called for with the factory/halogen light.  The phase 7, once you get it set, will make you wonder why you waited so long.  Plus, with the look it has just sitting gives the bike a different look.
is there a guide to how to do this?

Sent from my SCH-R970 using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on May 15, 2014, 10:14:31 AM
is there a guide to how to do this?
Sent from my SCH-R970 using Tapatalk

sending you a PM
Title: Re: What did you do to or on your CVO today?
Post by: 2k on May 15, 2014, 10:35:46 AM
Installed a phase 7 headlight.
Sent from my SCH-R970 using Tapatalk

 :worthless:
Title: Re: What did you do to or on your CVO today?
Post by: Timusa on May 16, 2014, 05:01:51 PM
Installed a "lip" or spoiler on my stock Road King windshield. Have yet to test it at speeds but like the result so far.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on May 16, 2014, 05:29:18 PM
:worthless:
(http://i1244.photobucket.com/albums/gg579/jswerve1974/2014-05-16162633_zps97f2dd01.jpg) (http://s1244.photobucket.com/user/jswerve1974/media/2014-05-16162633_zps97f2dd01.jpg.html)
Title: Re: What did you do to or on your CVO today?
Post by: MrSurly on May 16, 2014, 05:54:06 PM
Ordered clutch and brake hoses to get ready for a w1 575 swap.
I'd like to get that done before next weekend.
Picked up some more Amsoil for the oil change this weekend.
Hoping to ride it Sunday.
Title: Re: What did you do to or on your CVO today?
Post by: lpekim on May 16, 2014, 10:15:51 PM
Took cover off wiped off pollen and rode to work and home
Title: Re: What did you do to or on your CVO today?
Post by: Grizzly on May 16, 2014, 11:05:53 PM
(http://i1244.photobucket.com/albums/gg579/jswerve1974/2014-05-16162633_zps97f2dd01.jpg) (http://s1244.photobucket.com/user/jswerve1974/media/2014-05-16162633_zps97f2dd01.jpg.html)

I notice you still have the fulgly sticker right in the middle of your engine guard.  Just sayin'

Nice light though.
Title: Re: What did you do to or on your CVO today?
Post by: jaxaussie on May 16, 2014, 11:27:14 PM
Rode mine
Title: Re: What did you do to or on your CVO today?
Post by: Kilaani on May 17, 2014, 11:11:46 AM
I notice you still have the fulgly sticker right in the middle of your engine guard.  Just sayin'

Nice light though.

Dang that's on my list to remove, too. I'd better get right on it. Goo be gone to the rescue!
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on May 17, 2014, 11:52:05 AM
I notice you still have the fulgly sticker right in the middle of your engine guard.  Just sayin'

Nice light though.

I have a long list of things to do and that's not even on the bottom...
Title: Re: What did you do to or on your CVO today?
Post by: owl893 on May 17, 2014, 01:10:08 PM
Is that the one that says; "Never use a lit match or open flame to check fuel level"?
The wife says "Scrubbing Bubbles" used to say "Not for personal hygiene", I was gonna disagree, but caught myself just in time.

OWL
Title: Re: What did you do to or on your CVO today?
Post by: JakeB on May 17, 2014, 09:53:34 PM
installed fullsac sport pipe, flashed ECM, changed fluids for 1000 mile service.  I LOVE this god damn CVO Road King!!!!!
Title: Re: What did you do to or on your CVO today?
Post by: Twism_23 on May 17, 2014, 10:45:46 PM
Installed chrome horn from a  breakout to the front of my bike.


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on May 17, 2014, 10:49:08 PM
Rode it 140 miles.
Title: Re: What did you do to or on your CVO today?
Post by: FLHTCUSE7 on May 17, 2014, 11:03:20 PM
Went for a short 580 mile lunch ride. Lunch was not so good but the ride was! 

Title: Re: What did you do to or on your CVO today?
Post by: dahsen on May 17, 2014, 11:08:34 PM
Put silencers in my Khrome Werks slip ons that were a bit loud.... Wow, those things really work well!!!  Better than expected....

They do such a great job that they're back in the box...   >:(
Title: Re: What did you do to or on your CVO today?
Post by: 05Train on May 17, 2014, 11:28:36 PM
Installed a Rampage lift into my truck and practiced loading the bike.  Headed to Iowa on Thursday.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on May 18, 2014, 06:35:35 AM
Installed a Rampage lift into my truck and practiced loading the bike.  Headed to Iowa on Thursday.

What are coming here for?
Title: Re: What did you do to or on your CVO today?
Post by: 05Train on May 18, 2014, 09:48:10 AM
What are coming here for?
Rumor has it that y'all have really good pork tenderloin sandwiches there.  So a buddy of mine from Long Island are meeting in PA, leaving the trucks there, meeting a few other friends outside of Chicago, then ending up in Guttenberg, IA.  We'll spend Saturday riding around there, Wisconsin (and maybe Minnesota), eat a lot, cruise a bit on Sunday morning, then ride home.

Quick 4-day, 3,000 mile RTE.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on May 18, 2014, 09:53:22 AM
Rumor has it that y'all have really good pork tenderloin sandwiches there.  So a buddy of mine from Long Island are meeting in PA, leaving the trucks there, meeting a few other friends outside of Chicago, then ending up in Guttenberg, IA.  We'll spend Saturday riding around there, Wisconsin (and maybe Minnesota), eat a lot, cruise a bit on Sunday morning, then ride home.

Quick 4-day, 3,000 mile RTE.

We have fried pork tenderloin sandwiches that are about 12" in diameter pop some onions and mustard on a bun and pure glory.

Awesome riding up around Dubuque on the Mississippi River. Holler if you got any questions.

Jesse

Sent from my SCH-R970 using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: cvo2007 on May 18, 2014, 11:16:20 AM
Installed some new RC Components exhausts on true duals and replaced the lock on my tour pack.  Changing oil then going for a ride.  It has finally stopped raining here.

Title: Re: What did you do to or on your CVO today?
Post by: Rooster on May 18, 2014, 11:42:18 AM
Rumor has it that y'all have really good pork tenderloin sandwiches there.  So a buddy of mine from Long Island are meeting in PA, leaving the trucks there, meeting a few other friends outside of Chicago, then ending up in Guttenberg, IA.  We'll spend Saturday riding around there, Wisconsin (and maybe Minnesota), eat a lot, cruise a bit on Sunday morning, then ride home.

Quick 4-day, 3,000 mile RTE.
Don't forget your truck :huepfenlol2:
Title: Re: What did you do to or on your CVO today?
Post by: 2k on May 18, 2014, 12:32:02 PM
Don't forget your truck :huepfenlol2:

That would be a mellava hess
Title: Re: What did you do to or on your CVO today?
Post by: OBB on May 18, 2014, 03:45:39 PM
Gave it a much needed bath

Sent from my DROID RAZR HD using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on May 18, 2014, 03:49:43 PM
Gave it a much needed bath

Sent from my DROID RAZR HD using Tapatalk


Sent from my SCH-R970 using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: 05Train on May 18, 2014, 06:25:40 PM

Don't forget your truck :huepfenlol2:
No doubt.   I just got the Rampage, so this is a first for me.   It'll be so nice not to have to ride through DC area traffic for the last hours of a long ride.   


Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on May 18, 2014, 08:40:06 PM
Must have been bored tonight.  I peeled off the sticker in the middle of the crash bar. I can't believe I did that.   :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: OBB on May 18, 2014, 08:57:04 PM
Must have been bored tonight.  I peeled off the sticker in the middle of the crash bar. I can't believe I did that.   :nixweiss:
Great,,,, you just voided your warranty..... :P  I tried to get to mine today and said the hell with it. I'll get it another day.
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on May 18, 2014, 09:03:31 PM
I think I voided mine long before I peeled off that sticker.  Do heads,tts, 58 mm TB,removing the cat help? :o
Title: Re: What did you do to or on your CVO today?
Post by: OBB on May 18, 2014, 09:05:28 PM
I think I voided mine long before I peeled off that sticker.  Do heads,tts, 58 mm TB,removing the cat help? :o
Nah,,, they could care less about that stuff.
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on May 18, 2014, 09:06:58 PM
Whew. That's good.  Maybe they won't look by the crash bar.  :D
Title: Re: What did you do to or on your CVO today?
Post by: 2k on May 18, 2014, 10:16:12 PM
Must have been bored tonight.  I peeled off the sticker in the middle of the crash bar. I can't believe I did that.   :nixweiss:

You been talkin' to Grizzly?
Title: Re: What did you do to or on your CVO today?
Post by: Bigfoot16 on May 19, 2014, 02:45:26 AM
Took the RC mufflers off and put rhineharts on it.  I know, I know.....rhineharts
Title: Re: What did you do to or on your CVO today?
Post by: HUBBARD on May 19, 2014, 12:41:55 PM
Tilley/K&N Air Filter  8)  Later--HUBBARD
Title: Re: What did you do to or on your CVO today?
Post by: HUBBARD on May 19, 2014, 12:45:44 PM
Little extra Dash Chrome & Speaker Trim  8) Later--HUBBARD
Title: Re: What did you do to or on your CVO today?
Post by: HUBBARD on May 19, 2014, 12:49:31 PM
Chrome Belt-Guard, Swinger-Arm Trim, Front Frame Crossmember Cover, & Inner Primary Cover--Don't like the Primary cover, but looks better with, than without, IMO.  I'll get the Inner-Primary chromed when I tear the Motor down.   8)  Later--HUBBARD
Title: Re: What did you do to or on your CVO today?
Post by: HUBBARD on May 19, 2014, 01:02:17 PM
Headlight, Driving Light, and signal Light Trim.   8)  Later--HUBBARD
Title: Re: What did you do to or on your CVO today?
Post by: HUBBARD on May 19, 2014, 01:11:24 PM
I bought an adjustment plate from Harry, when we were down for Bike Week, that moved the Tour-Pak back a few more inches, to make it more comfortable for the Babes I know with a little "girth" on 'em.  I like a woman with a little "girth" on her.  ;) LMAO  I've put more chrome here and there, but I'm runnin' out of places to put it.  Seems to me too much starts to take away from the CVO, as opposed to an Ultra.  Can't believe I just said that.   ???  Later--HUBBARD
Title: Re: What did you do to or on your CVO today?
Post by: WestCoastRuss on May 19, 2014, 01:31:45 PM
Getting ready for the West Coast GTG...changed all the fluids, washed and waxed (RB of course)...rode it for an hour to check for "stuff".  Today will change to the comfy saddle and add the tour pack.....
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on May 19, 2014, 02:59:35 PM
I bought an adjustment plate from Harry, when we were down for Bike Week, that moved the Tour-Pak back a few more inches, to make it more comfortable for the Babes I know with a little "girth" on 'em.  I like a woman with a little "girth" on her.  ;) LMAO  I've put more chrome here and there, but I'm runnin' out of places to put it.  Seems to me too much starts to take away from the CVO, as opposed to an Ultra.  Can't believe I just said that.   ???  Later--HUBBARD
Looking good. :2vrolijk_21: Don't worry you'll find more you can add to her before you get to the point it will be to much.

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on May 19, 2014, 03:00:12 PM
Getting ready for the West Coast GTG...changed all the fluids, washed and waxed (RB of course)...rode it for an hour to check for "stuff".  Today will change to the comfy saddle and add the tour pack.....
You going to have to give the Breakout the same treatment too? ;) ;D

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: Grizzly on May 19, 2014, 03:23:40 PM
Must have been bored tonight.  I peeled off the sticker in the middle of the crash bar. I can't believe I did that.   :nixweiss:

'at a boy!   :2vrolijk_21:

Show more chrome!

Did you get the ones on your saddlebag guards and tour pack rack as well?

Just wondering.   ;D
Title: Re: What did you do to or on your CVO today?
Post by: WestCoastRuss on May 19, 2014, 04:05:58 PM
You going to have to give the Breakout the same treatment too? ;) ;D

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:

As we all know....."it ain't gonna wax itself"  :nervous:

Will be taking it to the dealer this week for the 1000 mile service and a "cool it off a bit" tune........
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on May 19, 2014, 05:45:19 PM
As we all know....."it ain't gonna wax itself"  :nervous:

Will be taking it to the dealer this week for the 1000 mile service and a "cool it off a bit" tune........
So true!!! :D :D

 :2vrolijk_21:

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on May 19, 2014, 08:30:33 PM
'at a boy!   :2vrolijk_21:

Show more chrome!

Did you get the ones on your saddlebag guards and tour pack rack as well?

Just wondering.   ;D

Those came off mine about the same time as the reflectors on the forks and bag guards   ;)

Dropped mine off this afternoon for a new rear sneaker and installation of the HD dual cartridges in the front end. I'm optimistic that the front suspension mods will make a noticeable improvement.
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on May 20, 2014, 12:43:41 AM
phato,, don't hold your breath,,,  i did my front end with the hd kit,, was disappointed big time.. mostly that the bike still nosed dived on abrupt stops...i went back to stock parts, with heavier springs and hd fork oil;    was good to go ever since   stuart
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on May 20, 2014, 05:27:30 AM
I'm hoping that the cartridges will minimize the " vague" feeling best described as a lack of feedback from the front end during moderate speed sweeping corners.  I did notice that the '14 's exhibit less brake dive and feel a little more "planted" with the single cartridge setup they have. I guess I'll find out if it helps soon enough...

Sent from my SCH-I545 using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: HUBBARD on May 20, 2014, 11:57:46 AM
Looking good. :2vrolijk_21: Don't worry you'll find more you can add to her before you get to the point it will be to much.

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:

I'm lookin' d00d, but can't see it yet. 8)  Later--HUBBARD
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on May 20, 2014, 03:39:12 PM
Bought some Redline V-Twin Transmission w SchockProof , V-Twin Primary Case Oil, will change out when I'm back home.
Title: Re: What did you do to or on your CVO today?
Post by: Rooster on May 20, 2014, 05:16:57 PM
phato,, don't hold your breath,,,  i did my front end with the hd kit,, was disappointed big time.. mostly that the bike still nosed dived on abrupt stops...i went back to stock parts, with heavier springs and hd fork oil;    was good to go ever since   stuart
I have been bike sitting for one of my brothers 2003 RKC. Went for a ride and immediately realized how bad the stock front is compared to the Traxxion Ak20's on my CVO. Guess I just forgot about how stock was after riding several years with the AK20's.
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on May 20, 2014, 10:12:20 PM
I like a little contrast. I switched out the chrome insert on the air cleaner today to black. Goes with the deflectors and the little bit of black on the exhaust.  Stuart.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on May 20, 2014, 10:18:21 PM
I like a little contrast. I switched out the chrome insert on the air cleaner today to black. Goes with the deflectors and the little bit of black on the exhaust.  Stuart.
looks great

Sent from my SCH-R970 using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on May 20, 2014, 10:27:36 PM
phato,, don't hold your breath,,,  i did my front end with the hd kit,, was disappointed big time.. mostly that the bike still nosed dived on abrupt stops...i went back to stock parts, with heavier springs and hd fork oil;    was good to go ever since   stuart
Stuart, I don't usually disagree with you but I gotta say I do on this one. I have the Ohlin 6's on the rear and the HD cartridges on the front and I think the combo is fantastic. Spent a couple of hours on the new 6 GTL BMW a little while ago and obviously it handled great but I would put my bike "right there". Maybe I am just that "brain washed"..
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on May 20, 2014, 10:29:00 PM
6 GTL BMW
6 Cylinder
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on May 20, 2014, 10:59:28 PM
I never touched the rear.  Set up is still bone stock. The front end the way I have it works fine for me. I have progressive springs and I find the front is just right.  Brake diving isn't too bad.  You gotta have some. Just the the hd double cartridge didn't do it for me.  The set up is good for Florida' s  mostly flat roads.   Just sayin.
Title: Re: What did you do to or on your CVO today?
Post by: 1sharprdkg on May 20, 2014, 11:16:14 PM
I like a little contrast. I switched out the chrome insert on the air cleaner today to black. Goes with the deflectors and the little bit of black on the exhaust.  Stuart.
Looks good buddy! I like it.
Title: Re: What did you do to or on your CVO today?
Post by: HUBBARD on May 21, 2014, 10:51:08 PM
Looking good. :2vrolijk_21: Don't worry you'll find more you can add to her before you get to the point it will be to much.

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:

Chitty pictures on my part, d00d.  I'll get some better ones when I'm able to move "Ol Maybelle" outside.  Supposed to be pretty in the Mountain State this weekend.  I wanted to ride with OTIS and 'nem to Rainelle, WV, to meet all those Veterans heading to the "WALL", but just ain't up to it yet.  Won't be long 'till I'm back in the breeze.   ;)  Later--HUBBARD
Title: Re: What did you do to or on your CVO today?
Post by: MrSurly on May 22, 2014, 12:26:35 AM
I pulled down the primary to check on the stator and rotor, tensioner, etc. I then add a Barnett Low-profile lock Up pressure plate. I LIKE it. The clutch is now positive, no slippage, no uncertainty. Lever effort is up, but man, the next gear hits hard!
(http://www.pbase.com/nufsed/image/155756497.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: 05Train on May 22, 2014, 05:16:06 AM
Now if you could just get the cover back on.....
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on May 22, 2014, 06:02:16 AM
I hope it fits  :P
Title: Re: What did you do to or on your CVO today?
Post by: MrSurly on May 22, 2014, 12:43:22 PM
It FITS! It works really well, and there is NO room to spare in there....but there's enough!

Can't use my logo cover, though.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on May 22, 2014, 01:26:15 PM
Had my ghost pipe mounted with the stock crossover and it would move around and didn't line up well at all so ordered the hangar from Frank and installed today. Looks much better and a lot easier on my OCD!

(http://i1244.photobucket.com/albums/gg579/jswerve1974/2014-05-22115902_zps004553ca.jpg) (http://s1244.photobucket.com/user/jswerve1974/media/2014-05-22115902_zps004553ca.jpg.html)

(http://i1244.photobucket.com/albums/gg579/jswerve1974/2405c8d8-5137-4431-93c6-993ca67d0e3a_zps870b8027.jpg) (http://s1244.photobucket.com/user/jswerve1974/media/2405c8d8-5137-4431-93c6-993ca67d0e3a_zps870b8027.jpg.html)
Title: Re: What did you do to or on your CVO today?
Post by: MrSurly on May 22, 2014, 01:56:04 PM
Looks much better and a lot easier on my OCD!


Well, the inside of the ghost pipe is a much lighter color...but I'm sure no one will notice...    ;D

Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on May 22, 2014, 01:59:04 PM
Well, the inside of the ghost pipe is a much lighter color...but I'm sure no one will notice...    ;D
it's painted black that's as good as you're gonna get

Sent from my SCH-R970 using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: cambo on May 22, 2014, 05:59:09 PM
rode back from 2k's in NC - 400 miles, 1100+ miles since Tuesday on a CVOBO with a backpack. Anyone wondering if you can survive a long trip on a CVOBO, the answer is a resounding 'YES'.

(https://farm6.staticflickr.com/5235/14247051024_eed02d1345_b.jpg) (https://flic.kr/p/nGXRUL)
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on May 22, 2014, 06:36:47 PM
rode back from 2k's in NC - 400 miles, 1100+ miles since Tuesday on a CVOBO with a backpack. Anyone wondering if you can survive a long trip on a CVOBO, the answer is a resounding 'YES'.

(https://farm6.staticflickr.com/5235/14247051024_eed02d1345_b.jpg) (https://flic.kr/p/nGXRUL)

Great pic what did you use to make it?
Title: Re: What did you do to or on your CVO today?
Post by: cambo on May 22, 2014, 07:28:27 PM
Thanks. Perfect Effects 8 - HDR filter
Title: Re: What did you do to or on your CVO today?
Post by: Helomech74 on May 22, 2014, 10:48:29 PM
Put mine under a cover and on a battery charger for a 3 month storage until I get back home.
Title: Re: What did you do to or on your CVO today?
Post by: dahsen on May 22, 2014, 10:58:08 PM
Went to the dealer for the fuel indicator recall...  20 minutes...
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on May 22, 2014, 11:22:14 PM
pipes lookin good back there Jesse. :2vrolijk_21:   Fill in the holes just right,,  nice to know that smashed in crossover pipe doesn't do any of the work any long too...
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on May 23, 2014, 12:02:15 AM
pipes lookin good back there Jesse. :2vrolijk_21:   Fill in the holes just right,,  nice to know that smashed in crossover pipe doesn't do any of the work any long too...
yeah that thing sucked!

Sent from my SCH-R970 using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: dayne66 on May 23, 2014, 08:19:24 AM
Put the covers on the bikes in their new room off the garage in the new house and tarped off the doorway so the contractor can use the garage as a shop to finish the renos on the new house while I'm at work for two weeks..
Title: Re: What did you do to or on your CVO today?
Post by: MrSurly on May 23, 2014, 12:19:17 PM
Talked with Frank Dragos about the new pipe I have ordered; Their chromer is having an issue with their polishing process so all the chrome pipes are delayed...
Frustrating as I can't wait to install the Dragula! The FatCat makes good power and its beautiful but..DANG! it's loud! Hoping the Drago will be more pleasing to these tired ears. In the mean time, before leaving for work today, I had to go out to the garage and just admire the silly thing. :apple:
I love this bike!
 :-*
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on May 23, 2014, 01:20:02 PM
Talked with Frank Dragos about the new pipe I have ordered; Their chromer is having an issue with their polishing process so all the chrome pipes are delayed...
Frustrating as I can't wait to install the Dragula! The FatCat makes good power and its beautiful but..DANG! it's loud! Hoping the Drago will be more pleasing to these tired ears. In the mean time, before leaving for work today, I had to go out to the garage and just admire the silly thing. :apple:
I love this bike!
 :-*

Franks pipe has plenty of bark but it's a bit mellower then the fatcat imo. I've run both.

Sent from my SCH-R970 using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: lpekim on May 23, 2014, 08:22:33 PM
Installed my Yaffee license plate holder wow sure cleans up the ars end for sure, but WOW my inside fenders are dirty :soapbox:
Title: Re: What did you do to or on your CVO today?
Post by: MrSurly on May 24, 2014, 12:48:47 AM
Today I received the extended clutch and brake hoses (+4" that I may not need).
So tomorrow I'll start the 575 chubby install.
Wish me luck!
I'll post some pics when I make some progress
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on May 24, 2014, 12:01:25 PM
Picked up the bike from the dealer after the HD premium dual cartridge install. Right away I noticed that the brake dive is much reduced and the front end does have a stiffer and more planted feeling, no lack of feedback from these at all. I need to take it easy until the new rear tire gets a few miles on it - just my habit, might not be needed but it's the way I've always done it - Later this weekend we have a nice long ride planned and after that I will have a better idea of just how much improvement has been made. At this point it seems to me like it's a definite improvement.
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on May 24, 2014, 05:49:02 PM
Rode to Fairfax (Patriot H-D) for the HOG Pin Stop to collect my Rolling Thunder 2014 pin.

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: cambo on May 24, 2014, 05:56:55 PM
Rode to Fairfax (Patriot H-D) for the HOG Pin Stop to collect my Rolling Thunder 2014 pin.

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:

+ "And didn't tell my CVO buddies that I would be in the neighborhood otherwise they would have rode over to say hello!!"  :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on May 24, 2014, 06:05:07 PM
+ "And didn't tell my CVO buddies that I would be in the neighborhood otherwise they would have rode over to say hello!!"  :nixweiss:
Ok.... I know... I'm sorry.... we're even.... good talking to you (as I was reading your post here). :2vrolijk_21: :D :D

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: FLHTCUSE7 on May 24, 2014, 06:30:05 PM
Added true duals and V&H monster rounds plus fuelpak FP3
Title: Re: What did you do to or on your CVO today?
Post by: Honneybeast on May 24, 2014, 06:45:16 PM
Wiped the bugs and dust off it, oh yeah and plugged it in.  Going to rain all week.
Title: Re: What did you do to or on your CVO today?
Post by: davidw221 on May 24, 2014, 07:03:36 PM
painted my Screamin Eagle red, and painted my vents.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on May 24, 2014, 09:17:51 PM
Put 110 miles on it on a poker run supporting local high schools!
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on May 24, 2014, 09:55:00 PM
Did about 200 miles today with John Sachs, another friend Rick and his sweet wife Carol.  Great day.  I keep telling John my sg3 is his best build ever.  :P
Title: Re: What did you do to or on your CVO today?
Post by: Trans am on May 24, 2014, 10:47:28 PM
Cleaned the underside. As I ran over armadillo, had fresh road kill underneath.   What a freaking mess.     Bikes clean now.   
Title: Re: What did you do to or on your CVO today?
Post by: Lever on May 24, 2014, 11:08:26 PM
now that's gross
Title: Re: What did you do to or on your CVO today?
Post by: MrSurly on May 25, 2014, 03:47:34 AM
Spent the afternoon putting the new bars on. Should finish up in the morning.
I added iPhone and Garmin wiring in there as well.
Should be able to try it all out soon
Title: Re: What did you do to or on your CVO today?
Post by: Lars on May 25, 2014, 11:21:34 AM
Went to go for a putt yesterday and the engine turned over once and then the starter just clicked. So, pulled the battery, made the fifty mile trip to the dealer to have it tested. It checked out to be bad so they gave me a new one under warranty. Run back home and install new battery, start bike and go for the putt two hours late.
All's well that ends well.
Title: Re: What did you do to or on your CVO today?
Post by: cambo on May 25, 2014, 12:04:24 PM
Rolling Thunder 2014.

Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on May 25, 2014, 12:58:10 PM
Rolling Thunder 2014.
That looks familiar... Ride of the Patriots. :2vrolijk_21:

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: screaminCVO on May 25, 2014, 03:11:21 PM
Added true duals and V&H monster rounds plus fuelpak FP3

How do you like that setup??
Title: Re: What did you do to or on your CVO today?
Post by: FLHTCUSE7 on May 25, 2014, 04:35:27 PM
Sounds okay. I don't want it any louder than this.




How do you like that setup??
Title: Re: What did you do to or on your CVO today?
Post by: deldago on May 25, 2014, 10:50:04 PM
Went on a 400 mile ride to get a hotdog. The one and only Hillbilly hotdogs of Lesage, W.V. They have been on the food network with their 'HOMEWRECKER" hotdog, 15 inches of pure unaltered Americana covered with everything. If that isn't enough they have a 30 pound hamburger that feeds 50 if you brought a crowd! If you are ever near Huntington W.V. it is definitely worth the trip!
Title: Re: What did you do to or on your CVO today?
Post by: deldago on May 25, 2014, 10:54:06 PM
And yes, I was proud to wish this veteran a happy memorial day.
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on May 25, 2014, 11:17:41 PM


Washed, waxed then rode the bike a couple of hours among the Shade of the Natchez Trace.


 


Title: Re: What did you do to or on your CVO today?
Post by: OBB on May 26, 2014, 07:34:52 AM
300 mile lunch trip down to the Millstone in Logan, Ohio. Good food there, great road on the way down.
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on May 26, 2014, 10:38:19 AM
The fun part of owning a bike with purrty wheels.    I cleaned them!!
Title: Re: What did you do to or on your CVO today?
Post by: 93-331-29psi on May 26, 2014, 11:55:24 AM
Decided I was going to try my king TP in the solo position but don't want the arm rest easy chair backrest so I decided to get creative on filling the holes... Removed my mid frame heat deflectors where my heated gear controls were located. Moved the switches and plug into the now vacant holes in the TP lid.

(http://i38.photobucket.com/albums/e134/93-331-29PSI/2012%20FLTRXSE/C4A1F53E-9ECD-41D7-BBDE-B4ACDC886053_zpsojapg4w4.jpg) (http://s38.photobucket.com/user/93-331-29PSI/media/2012%20FLTRXSE/C4A1F53E-9ECD-41D7-BBDE-B4ACDC886053_zpsojapg4w4.jpg.html)

(http://i38.photobucket.com/albums/e134/93-331-29PSI/2012%20FLTRXSE/8E8707A5-8BCB-42E9-8A3F-BE7C56E24E71_zps0rqpjres.jpg) (http://s38.photobucket.com/user/93-331-29PSI/media/2012%20FLTRXSE/8E8707A5-8BCB-42E9-8A3F-BE7C56E24E71_zps0rqpjres.jpg.html)

Title: Re: What did you do to or on your CVO today?
Post by: cambo on May 26, 2014, 12:41:12 PM
Installed the 2k coin.
Title: Re: What did you do to or on your CVO today?
Post by: MrSurly on May 26, 2014, 01:40:44 PM
Decided I was going to try my king TP in the solo position but don't want the arm rest easy chair backrest so I decided to get creative on filling the holes... Removed my mid frame heat deflectors where my heated gear controls were located. Moved the switches and plug into the now vacant holes in the TP lid


Very nicely done.
That's the sort of detail reconfiguring I've been doing. During my handlebar swap.  It is so time consuming, but man, it's rewarding when it looks factory like that.
Title: Re: What did you do to or on your CVO today?
Post by: Digital on May 26, 2014, 09:32:27 PM
Had to install a new trim ring on the RK.   No Gap!

Before:

(http://i1239.photobucket.com/albums/ff505/Digital1976/AA6EE476-0291-41F1-9F08-19CE132FB06A_zpss8osn5w4.jpg) (http://s1239.photobucket.com/user/Digital1976/media/AA6EE476-0291-41F1-9F08-19CE132FB06A_zpss8osn5w4.jpg.html)

After:

(http://i1239.photobucket.com/albums/ff505/Digital1976/139C0D23-1C6C-4F1B-8DD4-01C2EAE9372A_zps9bqpllgq.jpg) (http://s1239.photobucket.com/user/Digital1976/media/139C0D23-1C6C-4F1B-8DD4-01C2EAE9372A_zps9bqpllgq.jpg.html)
Title: Re: What did you do to or on your CVO today?
Post by: 05Train on May 26, 2014, 09:44:40 PM
Rode it home from Minnesota.

(http://i48.photobucket.com/albums/f229/rthomp159/IMG_0303_zps462126b4.jpg) (http://s48.photobucket.com/user/rthomp159/media/IMG_0303_zps462126b4.jpg.html)
Title: Re: What did you do to or on your CVO today?
Post by: OBB on May 26, 2014, 09:53:12 PM
Rode it home from Minnesota.

(http://i48.photobucket.com/albums/f229/rthomp159/IMG_0303_zps462126b4.jpg) (http://s48.photobucket.com/user/rthomp159/media/IMG_0303_zps462126b4.jpg.html)
Looks like your buddy is running a GAGstad windshield. had to look twice at it as the color is not that noticeable at first glance.
Title: Re: What did you do to or on your CVO today?
Post by: 05Train on May 26, 2014, 09:55:47 PM
Looks like your buddy is running a GAGstad windshield. had to look twice at it as the color is not that noticeable at first glance.
We both do. 

Best windshields out there.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on May 26, 2014, 09:57:31 PM
We both do. 

Best windshields out there.
I had to go back and look at yours. I see a Shark and that's the first thing I look at. Have been thinking about one for mine for a while now.
Title: Re: What did you do to or on your CVO today?
Post by: 05Train on May 26, 2014, 10:01:00 PM
I had to go back and look at yours. I see a Shark and that's the first thing I look at. Have been thinking about one for mine for a while now.
They're the best.  They work better on the Shark than they do on the Batwing, but either way they're fantastic.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on May 26, 2014, 10:03:30 PM
They're the best.  They work better on the Shark than they do on the Batwing, but either way they're fantastic.
Like the looks on your buddy's bike. See if he can give you the specs on the one he has and also how tall he is. From what I've read on Madstad's site, I should be getting a 14.5" shield. Don't know if I can live with the looks of it though. The 13" I think I can get by with. Just don't want to spend over $300 on something if it isn't going to work for the wife on the back.
Title: Re: What did you do to or on your CVO today?
Post by: 05Train on May 26, 2014, 10:06:06 PM
Like the looks on your buddy's bike. See if he can give you the specs on the one he has and also how tall he is. From what I've read on Madstad's site, I should be getting a 14.5" shield. Don't know if I can live with the looks of it though. The 13" I think I can get by with. Just don't want to spend over $300 on something if it isn't going to work for the wife on the back.
He's short.....5'7" or so.  I think he's using an 11", but I'll check with him tomorrow.
Title: Re: What did you do to or on your CVO today?
Post by: SBB on May 26, 2014, 10:08:01 PM
I had to go back and look at yours. I see a Shark and that's the first thing I look at. Have been thinking about one for mine for a while now.


What windshield you running on your bike Mike?
What other sizes and brands have you tried?

 :nixweiss:

SBB


Title: Re: What did you do to or on your CVO today?
Post by: MrSurly on May 27, 2014, 01:19:37 AM
Mad stad







Mudflap...

Just sayin'
Title: Re: What did you do to or on your CVO today?
Post by: OBB on May 27, 2014, 05:17:53 AM

What windshield you running on your bike Mike?
What other sizes and brands have you tried?

 :nixweiss:

SBB



Stock
10" windvest -bought from a former coworker. WAY TOO SHORT
13" KW Flare - Didn't fit for crap and it beat the hell out of me.
Current is a 13" LRS Mako. Best one so far but still get beat up with the half helmet on the highway. Debi doesn't complain about the wind but I know if I'm getting it with the 1/2 lid, she's getting it worse.

Now we did get new Nolan modulars this year for traveling and that makes one helluva difference on the highway but always looking for something better in the shield department.
Title: Re: What did you do to or on your CVO today?
Post by: HUBBARD on May 27, 2014, 01:07:26 PM
Better picture of the adapter plate I bought from Harry, to move the Tour-Pak back. ;)  Later--HUBBARD
Title: Re: What did you do to or on your CVO today?
Post by: Eagle Eye on May 27, 2014, 03:18:14 PM
New rear tire.


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: WestCoastRuss on May 27, 2014, 05:04:38 PM
Dropped the Breakout off at the dealer.......just over 1000 miles and time for a tune, have the recall on the fuel system completed......Mono Lake in the background. 
Title: Re: What did you do to or on your CVO today?
Post by: hawkeye4jw on May 27, 2014, 09:11:55 PM
Got the bike back from the dealer for the clutch last week. They rebuilt the master cylinder. Hope that was all it was. Rode a little Sunday and then changed all the fluids. Have to get a new filter wrench for this bike. Not much room.

Jack
Title: Re: What did you do to or on your CVO today?
Post by: wrayzor on May 28, 2014, 12:49:11 AM
I dreamed about mine growing a rake kit and 23" wheels, but only a dream as I am still deployed. 30 more days and I can show it some love!
Title: Re: What did you do to or on your CVO today?
Post by: brwk on May 28, 2014, 11:15:58 AM
Got back from the Bourbon Trail ride in Lexington KY.  We got to all 8 of them   8)
Title: Re: What did you do to or on your CVO today?
Post by: Supershooter on May 30, 2014, 10:13:40 AM
Got back from the Bourbon Trail ride in Lexington KY.  We got to all 8 of them   8)

Id like more info on the Bourbon Trail ride. Sounds like a great time

Supershooter
Title: Re: What did you do to or on your CVO today?
Post by: Mr. Warlock on May 30, 2014, 05:13:59 PM
Id like more info on the Bourbon Trail ride. Sounds like a great time

Supershooter

X2 Please
Title: Re: What did you do to or on your CVO today?
Post by: JoeVibe on May 30, 2014, 05:56:34 PM
Id like more info on the Bourbon Trail ride. Sounds like a great time

Supershooter

Here you go!
http://kybourbontrail.com/

You might like this one too!
http://www.tennesseewhiskeytrail.com/

Title: Re: What did you do to or on your CVO today?
Post by: bjspearman04 on May 30, 2014, 06:33:25 PM
Today, I scared the crap out of myself with every stroke of the handle...see pics.  Got to give credit to the little Sears jack that could...
Title: Re: What did you do to or on your CVO today?
Post by: FreestateSE3 on May 30, 2014, 08:50:15 PM
Installed Dynamic Ringz, load equalizer, and the rear tailight flasher thingy..... :bananarock:
Title: Re: What did you do to or on your CVO today?
Post by: Kilaani on May 31, 2014, 04:37:27 PM
Dropped the Breakout off at the dealer.......just over 1000 miles and time for a tune, have the recall on the fuel system completed......Mono Lake in the background.

Very fun riding along that side! I went across Yosemite West to East and then South from Mono Lake over to Bishop and then Barstow to home.

Pretty Breakout.
Title: Re: What did you do to or on your CVO today?
Post by: Kilaani on May 31, 2014, 04:42:34 PM
I left the lights on for over a hour and a half in the driveway after a nice ride this morning (had to get the lawnmower out...which reminds me, the lawn still needs to be mowed...ugh), so had a panic attack whilst putting on my boots that I'd have a dead battery. Thankfully, Scarlett started right up and got her back into the garage. It's near 100 degrees right now at 1:40....hmm...think the lawnmower may have to sit out front a little longer. Thank The Lord we have a putting green in the backyard!
Title: Re: What did you do to or on your CVO today?
Post by: Kilaani on May 31, 2014, 04:45:23 PM
Got the bike back from the dealer for the clutch last week. They rebuilt the master cylinder. Hope that was all it was. Rode a little Sunday and then changed all the fluids. Have to get a new filter wrench for this bike. Not much room.

Jack

Eek, your bike is the 2012, too, right? How many miles with the clutch/master cylinder problem?? I have 18,100 on mine now.
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on May 31, 2014, 07:19:02 PM
Dropped the bike off for a new head pipe and a dyno tune. Suspension will be next.  :jalapeno:
Title: Re: What did you do to or on your CVO today?
Post by: JoeVibe on May 31, 2014, 08:55:28 PM
Dropped the bike off for a new head pipe and a dyno tune. Suspension will be next.  :jalapeno:

That's where it starts.....and it's a slippery (and really steep) slope after that! The fun has just begun!!  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: SBB on May 31, 2014, 09:29:22 PM
Dropped the bike off for a new head pipe and a dyno tune. Suspension will be next.  :jalapeno:

REALLY?

You tell us something like that but don't give details?
What head pipe?
Who is tuning?
What tuner?
Work with us!

SBB



Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on May 31, 2014, 11:39:18 PM
REALLY?

You tell us something like that but don't give details?
What head pipe?
Who is tuning?
What tuner?
Work with us!

SBB








hehehehehehehehehe     :P     






soon enough my friend, soon enough.
Title: Re: What did you do to or on your CVO today?
Post by: Billy on June 01, 2014, 07:29:00 PM
Installed new custom bars and HD bag lights Billy
Title: Re: What did you do to or on your CVO today?
Post by: Billy on June 01, 2014, 07:30:29 PM
Bag light pictures Billy
Title: Re: What did you do to or on your CVO today?
Post by: Billy on June 01, 2014, 07:31:49 PM
 one more of the bars Billy
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on June 01, 2014, 08:04:45 PM
Bag light pictures Billy


Where did you get the bag lights, they look interesting?
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on June 01, 2014, 08:56:05 PM
Went for a 786 mile cruise

Sent from my SCH-R970 using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on June 01, 2014, 09:04:13 PM
Put Redline Primary and Transmission fluid in and went for a short ride.  Shifting is smoother and more quiet, still some clanking but not as loud.
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on June 02, 2014, 01:42:56 AM
Went for a 786 mile cruise

Sent from my SCH-R970 using Tapatalk
Yea baby!! You da man...
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on June 02, 2014, 06:51:12 AM
Yea baby!! You da man...

It was over 3 days on the Mississippi River not 1 lol. Had the wife on back I don't think she would like an 800 mile day!

Sent from my SCH-R970 using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: Billy on June 02, 2014, 09:20:03 AM

Where did you get the bag lights, they look interesting?
They in HD s new Rushmore parts catalogue.         Billy
Title: Re: What did you do to or on your CVO today?
Post by: Kilaani on June 02, 2014, 10:11:55 AM
Did a 440 mile ride yesterday, up through Overton, Mesquite, Gunlock SP, Enterprise, Panaca, Caliente and back home. It's now 18,500 miles on my '12 FLHXSE3. Yesterday was also our 2 year anniversary. Mods not done yet! Love my girl!!
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on June 02, 2014, 02:03:08 PM
Did a 440 mile ride yesterday, up through Overton, Mesquite, Gunlock SP, Enterprise, Panaca, Caliente and back home. It's now 18,500 miles on my '12 FLHXSE3. Yesterday was also our 2 year anniversary. Mods not done yet! Love my girl!!

Very nice! It was our 18 th anniversary last weekend. Bike has 15.3k and I'm taking a 3500 mile trip in 2 weeks :)

Sent from my SCH-R970 using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: Kilaani on June 02, 2014, 02:05:33 PM
Does SBB really stand for Surrounded By Blue?


Sent from my iPhone using Tapatalk
Title: What did you do to or on your CVO today?
Post by: Kilaani on June 02, 2014, 04:22:54 PM
Lol, I meant my second anniversary of having my CVO. Going on 5 with the Husband . Not sure both of us will survive 18 more, good job! We were both pretty set in our ways when we started, but hey, he got me into this CVO & riding obsession, so that makes him my true HERO! Plus, no one else could live with me. (http://img.tapatalk.com/d/14/06/03/y9a4eje9.jpg)


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: brwk on June 02, 2014, 07:23:54 PM
Did my 10K service @ 11200 miles. First year anniversary  :drink:   And best thing I paid for it all with my chrome cash  :bananarock:
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on June 02, 2014, 08:22:30 PM
Did my 10K service @ 11200 miles. First year anniversary  :drink:   And best thing I paid for it all with my chrome cash  :bananarock:

That's how I paid for my new Premium ride cartridges for the front end. Gotta love a rewards card that actually gives you rewards you will use.  :pepper:
Title: Re: What did you do to or on your CVO today?
Post by: OBB on June 02, 2014, 09:05:49 PM
Swapped out the Brembo pads for the Lyndall ZPlus. We'll see if the performance matches without the brake dust.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on June 02, 2014, 09:54:26 PM
Lol, I meant my second anniversary of having my CVO. Going on 5 with the Husband . Not sure both of us will survive 18 more, good job! We were both pretty set in our ways when we started, but hey, he got me into this CVO & riding obsession, so that makes him my true HERO! Plus, no one else could live with me. (http://img.tapatalk.com/d/14/06/03/y9a4eje9.jpg)


Whoops lol.

You take your pooch for rides?

Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: DCC on June 03, 2014, 07:06:27 PM
Had a great breakfast ride with my HOG chapter to a place called Flapjacks.  Then cleaned a bazillion bugs off the bikes.  :-\
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on June 03, 2014, 08:51:20 PM
Had a great breakfast ride with my HOG chapter to a place called Flapjacks.  Then cleaned a bazillion bugs off the bikes.  :-\

The bugs are crazy this year

Sent from my SCH-R970 using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: OBB on June 03, 2014, 09:10:34 PM
You take your pooch for rides?

She's not the only one.  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on June 03, 2014, 09:11:40 PM
She's not the only one.  :2vrolijk_21:

I'd have to add a sidecar.  My dog is a 65 lb siberian husky lol

Sent from my SCH-R970 using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: JoeVibe on June 03, 2014, 10:23:19 PM
I'd have to add a sidecar.  My dog is a 65 lb siberian husky lol

Sent from my SCH-R970 using Tapatalk

Here you go Jesse. This is what a friend of mine does, should work for you.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on June 03, 2014, 10:24:32 PM
Here you go Jesse. This is what a friend of mine does, should work for you.

Haha.  I saw a guy in Hewlett, WY with a black lab. He made a custom tour pak for him. 

Sent from my SCH-R970 using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: SmokeyJoe on June 04, 2014, 05:02:17 AM
I changed out the fluid in the brakes and clutch.  Clutch oil was really bad, very cloudy and alot of sediment. 
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on June 04, 2014, 08:52:53 AM
I changed out the fluid in the brakes and clutch.  Clutch oil was really bad, very cloudy and alot of sediment.

Clutch fluid is always like that.  I completely flushed mine when I did handlebars and it looked like that a week later. 

Sent from my SCH-R970 using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: SmokeyJoe on June 04, 2014, 09:48:14 AM
Clutch fluid is always like that.  I completely flushed mine when I did handlebars and it looked like that a week later. 

Sent from my SCH-R970 using Tapatalk

So it looks that way through the mechanics of the system vs. possible moisture contamination.  I was worried I somehow had a bad seal on the cover.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on June 04, 2014, 09:49:07 AM
So it looks that way through the mechanics of the system vs. possible moisture contamination.  I was worried I somehow had a bad seal on the cover.

Me too. I did some research and found it to be "normal"

Sent from my SCH-R970 using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: MrSurly on June 04, 2014, 02:16:46 PM
Me too. I did some research and found it to be "normal"

Sent from my SCH-R970 using Tapatalk

Ha-HAH!

They ALL do that.

You KNEW that was coming.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on June 04, 2014, 03:52:02 PM
Ha-HAH!

They ALL do that.

You KNEW that was coming.

Yep! Lol

Sent from my SCH-R970 using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on June 05, 2014, 10:58:55 AM
Got a set of Hogtunes Generation III speakers to slap in the ol SEEG as soon as I get off work
Title: Re: What did you do to or on your CVO today?
Post by: redbeard719 on June 05, 2014, 11:07:42 AM
Got caught in some crummy weather over the Memorial day weekend on a multi-day ride through the mountains.  Even had to change course to avoid winter weather advisories, and even then, we still ran into some snow.

Anyway, got the bike all cleaned up, detailed, and waxed again with Royal Blue.  I've even gotten some friends sold on Royal Blue now too....Its some great stuff!
Title: Re: What did you do to or on your CVO today?
Post by: cambo on June 05, 2014, 11:12:18 AM
Yesterday got the 5000 mile service done at Frederick HD. The guy who washed the bike did as good a job as I do! Great customer service.
Today I installed the digital oil temp/level dipstick.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on June 05, 2014, 11:29:15 AM
Got caught in some crummy weather over the Memorial day weekend on a multi-day ride through the mountains.  Even had to change course to avoid winter weather advisories, and even then, we still ran into some snow.

Anyway, got the bike all cleaned up, detailed, and waxed again with Royal Blue.  I've even gotten some friends sold on Royal Blue now too....Its some great stuff!

Damn Chad that sucks lol.
Title: Re: What did you do to or on your CVO today?
Post by: redbeard719 on June 05, 2014, 11:46:03 AM
Damn Chad that sucks lol.

Haha, you ain't kidding!  We left out of Breckenridge at 730AM Sunday.  Me and the Mrs both had full leathers, heated jackets and gloves, and rain gear on.  Rain/fog/snow into the west side of the Eisenhower Tunnel and out the east side the trees and grassy areas were snow covered.  Roads were just wet, but we managed to find some cold-ass rain and tiny hail coming down from 11000'....

Still wasn't as bad as the time we were going over Vail Pass at 10PM in October on the way home, with more cold rain and thunderstorms.  with 18" apes, I felt like I was holding onto to 2 lightning rods that day.  Vail Pass was dark as hell that night!

Springtime in the Rockies! 

How you been doing?
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on June 05, 2014, 11:55:59 AM
Haha, you ain't kidding!  We left out of Breckenridge at 730AM Sunday.  Me and the Mrs both had full leathers, heated jackets and gloves, and rain gear on.  Rain/fog/snow into the west side of the Eisenhower Tunnel and out the east side the trees and grassy areas were snow covered.  Roads were just wet, but we managed to find some cold-ass rain and tiny hail coming down from 11000'....

Still wasn't as bad as the time we were going over Vail Pass at 10PM in October on the way home, with more cold rain and thunderstorms.  with 18" apes, I felt like I was holding onto to 2 lightning rods that day.  Vail Pass was dark as hell that night!

Springtime in the Rockies! 

How you been doing?

That's what you call WHITE KNUCKLE RIDING haha. I am doing great. Did 800 miles up through Minnesota then down the Wisconsin side of the Mississippi last weekend. Dodged all the thunderstorms  :2vrolijk_21: Weather was awesome 85 and sunny got a nice tan lol. The riding is great up there. Now prepping for the journey to the Smokey mountains in 2 short weeks! Where the hell does the time go? Here's a cpl piccys:

(http://i1244.photobucket.com/albums/gg579/jswerve1974/GEDC1326_zpsef25c06c.jpg) (http://s1244.photobucket.com/user/jswerve1974/media/GEDC1326_zpsef25c06c.jpg.html)

(http://i1244.photobucket.com/albums/gg579/jswerve1974/GEDC1342_zps8e3955e8.jpg) (http://s1244.photobucket.com/user/jswerve1974/media/GEDC1342_zps8e3955e8.jpg.html)

(http://i1244.photobucket.com/albums/gg579/jswerve1974/GEDC1325_zpsa450d207.jpg) (http://s1244.photobucket.com/user/jswerve1974/media/GEDC1325_zpsa450d207.jpg.html)

(http://i1244.photobucket.com/albums/gg579/jswerve1974/BuenaVista1_zps7975b377.jpg) (http://s1244.photobucket.com/user/jswerve1974/media/BuenaVista1_zps7975b377.jpg.html)

This last pic was from Buena Vista park in Alma, WI. The park is a 500 foot climb above the town and river  :bananarock:

Title: Re: What did you do to or on your CVO today?
Post by: redbeard719 on June 05, 2014, 12:10:36 PM
Nice pictures Jesse!  I forget how green it is up there! 

Here's one from our group on Memorial Day weekend.  This was on the west end of Paonia State Park, about an hour south of Glenwood Springs.   More bikes than I normally prefer, but it was a good group and was a great weekend.

(http://img.photobucket.com/albums/v322/gtigye79/20140524_122552_zpsnun8gzzh.jpg) (http://smg.photobucket.com/user/gtigye79/media/20140524_122552_zpsnun8gzzh.jpg.html)
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on June 05, 2014, 12:23:02 PM
Nice pictures Jesse!  I forget how green it is up there! 

Here's one from our group on Memorial Day weekend.  This was on the west end of Paonia State Park, about an hour south of Glenwood Springs.   More bikes than I normally prefer, but it was a good group and was a great weekend.

(http://img.photobucket.com/albums/v322/gtigye79/20140524_122552_zpsnun8gzzh.jpg) (http://smg.photobucket.com/user/gtigye79/media/20140524_122552_zpsnun8gzzh.jpg.html)

Wow there's some nice scooters there. My wife and I used to ride with about 10-15 bikes at all times but when we quit drinking they quit calling  :nixweiss: I hope to be able to come to Springs at a time when you will be around Chad. Would love to ride with ya.
Title: Re: What did you do to or on your CVO today?
Post by: MrSurly on June 05, 2014, 03:14:52 PM
used to ride with about 10-15 bikes at all times but when we quit drinking they quit calling 

Oh,man, ain't that the truth! Welcome to my little world.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on June 05, 2014, 03:39:59 PM
Oh,man, ain't that the truth! Welcome to my little world.



Sent from my SCH-R970 using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: Sarhan on June 06, 2014, 01:33:55 PM
Installed couple of parts on my friend scoot, he's member under name of Salman.

Jackpot XXX pipes
Title: Re: What did you do to or on your CVO today?
Post by: Sarhan on June 06, 2014, 02:05:33 PM
Fan & primary chrome inner
Title: Re: What did you do to or on your CVO today?
Post by: CVO2FIXUP on June 06, 2014, 03:29:08 PM
Here you go Jesse. This is what a friend of mine does, should work for you.

  Hope that dog is not catching to much carbon monoxide back there.
Title: Re: What did you do to or on your CVO today?
Post by: MrSurly on June 06, 2014, 03:54:31 PM
For the dog, I was hoping those are stock pipes!
Title: Re: What did you do to or on your CVO today?
Post by: MrSurly on June 06, 2014, 04:03:13 PM
I repaired the two switches that I clumsily broke during the 575 install.
(http://www.pbase.com/nufsed/image/155975122.jpg)
(http://www.pbase.com/nufsed/image/155975121.jpg)

And I fabbed a little mount for the Sena SM10 transmitter.
(http://www.pbase.com/nufsed/image/155971859.jpg)
(http://www.pbase.com/nufsed/image/155971863.jpg)
(http://www.pbase.com/nufsed/image/155971876.jpg)
(http://www.pbase.com/nufsed/image/155971054.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: hawkeye4jw on June 07, 2014, 06:13:49 PM
Eek, your bike is the 2012, too, right? How many miles with the clutch/master cylinder problem?? I have 18,100 on mine now.

Mine is a 2013 with 8,000 miles.

 Ride safe
 Jack
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on June 09, 2014, 11:30:06 PM
Pulled my WO577s back a little.   Made a huge difference.   Much more comfortable and my right hand doesn't fall asleep like it was.   Now I'm happy that I got the 12 s.   :)
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on June 09, 2014, 11:32:43 PM
One more.   Now that I got the hang of posting a pic,,,
Title: Re: What did you do to or on your CVO today?
Post by: Kilaani on June 09, 2014, 11:53:43 PM


Sent from my SCH-R970 using Tapatalk

That's sure one great looking bike, Jessie!

 :apple:
Jill
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on June 09, 2014, 11:57:39 PM
What about the best color for the sg3.   Hot citrus? :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: MrSurly on June 10, 2014, 12:02:32 AM
Added some horns. you can't have too many and really really loud isn't loud enough.
I found about the only place they could go and fabbed a bracket to squeeze 'em in there.
Why, yes, they ARE pretty loud!
(http://www.pbase.com/nufsed/image/156020098.jpg)
(http://www.pbase.com/nufsed/image/156020137.jpg)
(http://www.pbase.com/nufsed/image/156020095.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on June 10, 2014, 06:20:39 AM
Pulled my WO577s back a little.   Made a huge difference.   Much more comfortable and my right hand doesn't fall asleep like it was.   Now I'm happy that I got the 12 s.   :)

Stu I've tried to explain to people it only takes an inch to make a difference ;)

Sent from my SCH-R970 using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on June 10, 2014, 06:21:10 AM
That's sure one great looking bike, Jessie!

 :apple:
Jill

Thank you Jill! The fastest color!

Sent from my SCH-R970 using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on June 10, 2014, 07:36:54 AM
Added some horns. you can't have too many and really really loud isn't loud enough.
I found about the only place they could go and fabbed a bracket to squeeze 'em in there.
Why, yes, they ARE pretty loud!
(http://www.pbase.com/nufsed/image/156020098.jpg)
(http://www.pbase.com/nufsed/image/156020137.jpg)
(http://www.pbase.com/nufsed/image/156020095.jpg)




I was actually looking at doing something very similar. Looks pretty good, except the picture is very dark and can't see your handy work to well.   :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: dahsen on June 10, 2014, 07:51:46 AM
Went to the dealer for the fuel gauge recall (again), an oil leak and vibrations at 3000 rpm.

Waiting for the call...
Title: Re: What did you do to or on your CVO today?
Post by: Grizzly on June 10, 2014, 08:08:40 AM



I was actually looking at doing something very similar. Looks pretty good, except the picture is very dark and can't see your handy work to well.   :2vrolijk_21:

I've had Kuryakyn Hidden (dual trumpet) Horns on my bike for 6 years that are also tucked into the same location.  Still work great - nice & loud!

https://www.denniskirk.com/hidden-horn.p212888.prd/214055.sku

http://www.youtube.com/watch?v=iX8J1iTebRU
Title: Re: What did you do to or on your CVO today?
Post by: HarleyJeffOregon on June 10, 2014, 11:30:21 AM
Rode to work as always. Love the cool air in the morning!
Title: Re: What did you do to or on your CVO today?
Post by: GRam on June 10, 2014, 12:06:15 PM
Had my "medium" distance seat re-covered/stitched. The grey didn't come out as I had anticipated, but the stitching
is a pretty solid match for the pin stripe, overall pretty pleased with results. Next winter I will re-do it so the grey matches
more to my liking..
Title: Re: What did you do to or on your CVO today?
Post by: MrSurly on June 10, 2014, 12:31:04 PM



I was actually looking at doing something very similar. Looks pretty good, except the picture is very dark and can't see your handy work to well.   :2vrolijk_21:

Thanks. Yeah and that's with the flash(!) The paint is "Ultra Flat" and it really doesn't want to be seen.
(http://www.pbase.com/nufsed/image/156043163.jpg)

Here's a shot looking up from underneath. The gusset is visible between the horns.
Title: Re: What did you do to or on your CVO today?
Post by: 05Train on June 11, 2014, 08:28:23 PM
Got the BOPS (Big Orange Piece 'o Sh*t) loaded and ready for our 10 day, 3500 mile trip to Baton Rouge and Eureka Springs. 
Title: Re: What did you do to or on your CVO today?
Post by: Skillet on June 11, 2014, 08:38:15 PM
Rode to work and killed a bunch of bugs.
Title: Re: What did you do to or on your CVO today?
Post by: FLHTCUSE7 on June 11, 2014, 11:00:25 PM
Nice shocks!!



Thanks. Yeah and that's with the flash(!) The paint is "Ultra Flat" and it really doesn't want to be seen.
(http://www.pbase.com/nufsed/image/156043163.jpg)

Here's a shot looking up from underneath. The gusset is visible between the horns.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on June 12, 2014, 12:07:11 AM
Squeezed in another 100 miles and hit bike night

Sent from my SCH-R970 using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: HarleyJeffOregon on June 12, 2014, 02:16:15 AM
Turned 50,000 miles tonight!! :orange:
Title: Re: What did you do to or on your CVO today?
Post by: dayne66 on June 12, 2014, 10:23:30 AM
Went to the dealer and held my ass cheeks together as I shelled out $500 to get a new rear tire put on!
BTW: I got 25,000 km out of it.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on June 12, 2014, 10:45:10 AM
Went to the dealer and held my ass cheeks together as I shelled out $500 to get a new rear tire put on!
BTW: I got 25,000 km out of it.

Ouch! I right $400 was bad!

Sent from my SCH-R970 using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: MrSurly on June 12, 2014, 10:57:20 AM
I pulled off the D&D pipe and installed the Dragula pipe.
Looks nice, hopefully the rain will let up for a test ride soon!
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on June 12, 2014, 11:19:13 AM
I pulled off the D&D pipe and installed the Dragula pipe.
Looks nice, hopefully the rain will let for a test ride soon!

I did that this winter! D&D quality went down hill! Love franks pipe :)

Sent from my SCH-R970 using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on June 12, 2014, 06:03:05 PM
I did that this winter! D&D quality went down hill! Love franks pipe :)

Sent from my SCH-R970 using Tapatalk
      :o  that just dos'nt sound good
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on June 12, 2014, 06:03:41 PM
      :o  that just dos'nt sound good


LOL

Sent from my SCH-R970 using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: Fireguy on June 14, 2014, 09:02:07 AM
Made this so I could adjust the spotlights.
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on June 14, 2014, 09:36:40 AM
I have one of those.
Title: Re: What did you do to or on your CVO today?
Post by: kastout on June 15, 2014, 07:22:58 AM
New head pipe and the new RSD mufflers , Fuel pack 3.and last but not least wicked engine guard
 
Title: Re: What did you do to or on your CVO today?
Post by: Bigfoot16 on June 15, 2014, 10:42:17 AM
I rode to the dealership and traded for a 2014 CVO limited... I was very weak....
Title: Re: What did you do to or on your CVO today?
Post by: pdargen on June 15, 2014, 11:05:19 AM
After installing a few new nice pieces from Puzzled, Bagger Nation, H-D I finally got a chance to wash and polish it all together. Time to ride!
Title: Re: What did you do to or on your CVO today?
Post by: MrSurly on June 15, 2014, 01:08:22 PM
Started out on a seven hour jaunt up to Eureka Spring. AR for a weeklong frolic in the mountains.
Pig Trail, Here I come!
The changes to the bike are all payin' off right now. The Drago pipe sounds SOOOOO much more pleasant and the new bars are great!  Polished and waxed, lookin' good, but of course, hit the rains in OK.
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on June 15, 2014, 03:00:11 PM
Started out on a seven hour jaunt up to Eureka Spring. AR for a weeklong frolic in the mountains.
Pig Trail, Here I come!
The changes to the bike are all payin' off right now. The Drago pipe sounds SOOOOO much more pleasant and the new bars are great!  Polished and waxed, lookin' good, but of course, hit the rains in OK.

That sounds like a lot of fun, too many roads and not enough time to enjoy all the rides around Eureka Springs and North Arkansas.
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on June 15, 2014, 11:12:34 PM
I rode to the dealership and traded for a 2014 CVO limited... I was very weak....
Nice, congrts!
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on June 15, 2014, 11:30:38 PM
Started out on a seven hour jaunt up to Eureka Spring. AR for a weeklong frolic in the mountains.
Pig Trail, Here I come!
The changes to the bike are all payin' off right now. The Drago pipe sounds SOOOOO much more pleasant and the new bars are great!  Polished and waxed, lookin' good, but of course, hit the rains in OK.
Sweet!

Sent from my SCH-R970 using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: HarleyJeffOregon on June 16, 2014, 11:03:06 AM
Congrats!!
Title: Re: What did you do to or on your CVO today?
Post by: Bigfoot16 on June 16, 2014, 03:20:26 PM
Nice, congrts!

Thanks:)
Title: Re: What did you do to or on your CVO today?
Post by: cchog on June 16, 2014, 04:08:40 PM
Started out on a seven hour jaunt up to Eureka Spring. AR for a weeklong frolic in the mountains.
Pig Trail, Here I come!
The changes to the bike are all payin' off right now. The Drago pipe sounds SOOOOO much more pleasant and the new bars are great!  Polished and waxed, lookin' good, but of course, hit the rains in OK.

Nice!  I'm originally from Mountain Home and went to college in Fayetteville. A lot of good roads for riding.
Title: Re: What did you do to or on your CVO today?
Post by: Digital on June 16, 2014, 10:44:04 PM
Wired up the GPS and quickly set up the new tent for the first time to get ready for a 10 day bike trip to Colorado!   Also, one of the ladies in the sub had to sit on it today...   She couldn't resist.

(http://i1239.photobucket.com/albums/ff505/Digital1976/51D0DEDA-D6F8-4B5B-A78D-BB04E61E3378_zpsup11bw0n.jpg) (http://s1239.photobucket.com/user/Digital1976/media/51D0DEDA-D6F8-4B5B-A78D-BB04E61E3378_zpsup11bw0n.jpg.html)

(http://i1239.photobucket.com/albums/ff505/Digital1976/72EF1697-E7B2-40B8-8AC5-59096F20A970_zps9v1329sz.jpg) (http://s1239.photobucket.com/user/Digital1976/media/72EF1697-E7B2-40B8-8AC5-59096F20A970_zps9v1329sz.jpg.html)

(http://i1239.photobucket.com/albums/ff505/Digital1976/5E76A991-A474-454F-86CE-4FDDA76C071B_zpsdd403oow.jpg) (http://s1239.photobucket.com/user/Digital1976/media/5E76A991-A474-454F-86CE-4FDDA76C071B_zpsdd403oow.jpg.html)
Title: Re: What did you do to or on your CVO today?
Post by: Digital on June 17, 2014, 03:04:19 PM
I put the Supertrapp Stouts on Craigslist and ordered some CFR exhaust for the trip.   I liked the Supertrapps but heard some CFRs in person the other day and liked what I heard.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on June 17, 2014, 03:08:10 PM
I put the Supertrapp Stouts on Craigslist and ordered some CFR exhaust for the trip.   I liked the Supertrapps but heard some CFRs in person the other day and liked what I heard.

Bike is looking good. There are some issues with the chrome peeling on several CFR slip ons. There's a thread going around HDForums about it right now.
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on June 17, 2014, 07:11:13 PM
Wired up the GPS and quickly set up the new tent for the first time to get ready for a 10 day bike trip to Colorado!   Also, one of the ladies in the sub had to sit on it today...   She couldn't resist.

(http://i1239.photobucket.com/albums/ff505/Digital1976/51D0DEDA-D6F8-4B5B-A78D-BB04E61E3378_zpsup11bw0n.jpg) (http://s1239.photobucket.com/user/Digital1976/media/51D0DEDA-D6F8-4B5B-A78D-BB04E61E3378_zpsup11bw0n.jpg.html)

(http://i1239.photobucket.com/albums/ff505/Digital1976/72EF1697-E7B2-40B8-8AC5-59096F20A970_zps9v1329sz.jpg) (http://s1239.photobucket.com/user/Digital1976/media/72EF1697-E7B2-40B8-8AC5-59096F20A970_zps9v1329sz.jpg.html)

(http://i1239.photobucket.com/albums/ff505/Digital1976/5E76A991-A474-454F-86CE-4FDDA76C071B_zpsdd403oow.jpg) (http://s1239.photobucket.com/user/Digital1976/media/5E76A991-A474-454F-86CE-4FDDA76C071B_zpsdd403oow.jpg.html)

You should've put the passenger seat back on and taken her for a ride  ;)
Title: Re: What did you do to or on your CVO today?
Post by: HarleyJeffOregon on June 17, 2014, 08:13:24 PM
Ya Take her for a ride. :)
Title: Re: What did you do to or on your CVO today?
Post by: cmashark on June 17, 2014, 11:30:15 PM
Swapped out the Wood directional lifters with a set of S&S lifters, pushrods and installed a set of S&S race tour mufflers. The top end is now whisper quiet and exhaust has a nice deep tone to it.  It's like a new bike again.  Felt great on a short 30 mile trip to check out all the new parts.

Chris
Title: Re: What did you do to or on your CVO today?
Post by: JoeVibe on June 17, 2014, 11:50:09 PM
New engines tags, thanks to Legacy Baggers. The finishing touch for my 113" motor, thanks to GMR Performance!

Also added Legacy Baggers speaker grillz to replace the stock ones.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on June 18, 2014, 12:48:57 AM
New engines tags, thanks to Legacy Baggers. The finishing touch for my 113" motor, thanks to GMR Performance!

Also added Legacy Baggers speaker grillz to replace the stock ones.
Looks great

Sent from my SCH-R970 using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: SmokeyJoe on June 18, 2014, 02:13:03 AM
Yeah those engine tags are a nice touch
Title: Re: What did you do to or on your CVO today?
Post by: Rooster on June 18, 2014, 11:15:21 AM
Looks nice, Steve will like those :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Bigfoot16 on June 18, 2014, 12:26:06 PM
New engines tags, thanks to Legacy Baggers. The finishing touch for my 113" motor, thanks to GMR Performance!

Also added Legacy Baggers speaker grillz to replace the stock ones.

 Very cool.
Title: Re: What did you do to or on your CVO today?
Post by: Lever on June 18, 2014, 12:55:02 PM
X2
Title: Re: What did you do to or on your CVO today?
Post by: 05Train on June 18, 2014, 03:32:20 PM

Started out on a seven hour jaunt up to Eureka Spring. AR for a weeklong frolic in the mountains.
Pig Trail, Here I come!
The changes to the bike are all payin' off right now. The Drago pipe sounds SOOOOO much more pleasant and the new bars are great!  Polished and waxed, lookin' good, but of course, hit the rains in OK.
Hell yes they paid off you sneaky SOB. 

It's been a pleasure being chased by you.   
Title: Re: What did you do to or on your CVO today?
Post by: JoeVibe on June 18, 2014, 04:51:17 PM
Looks nice, Steve will like those :2vrolijk_21:

Thanks Rooster! I ran the design passed Steve before I had them made and yes he did like them. He exceeded my expectations by a mile with my build and I want to make sure he gets all the credit he deserves!!
Title: Re: What did you do to or on your CVO today?
Post by: RoadMonkey on June 18, 2014, 06:43:15 PM
not much today... Took off the windshield, switching around seat choices and the passenger back rest. Getting set up for shorter rides. That would be less then 300 miles per day kinda stuff =)
Title: Re: What did you do to or on your CVO today?
Post by: bjspearman04 on June 18, 2014, 09:10:40 PM
Thanks:Outstanding rig.  Enjoy the ride.
Title: Re: What did you do to or on your CVO today?
Post by: CVO Aqua-Glider on June 18, 2014, 11:34:33 PM
Took to the dealer for 5k service and ABS Brake Recall. Hopefully get her back in time to ride this weekend. :)
Title: Re: What did you do to or on your CVO today?
Post by: YELLOWBIRD on June 19, 2014, 08:42:56 AM
My bike and I both looked at each other and both agreed.

It's a bit too HOT to ride. But we will both sneak out and stress our legs later when it cools down!!!


 :huepfenjump3:


YB
Title: Re: What did you do to or on your CVO today?
Post by: Indenial on June 19, 2014, 09:30:14 AM
I crossed the Alaska border on my way to Fairbanks.  Great trip.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on June 19, 2014, 09:34:39 AM
I crossed the Alaska border on my way to Fairbanks.  Great trip.

What time is the wife coming in? Your trip looks amazing! The grizzly bears scare the chit out of me though lol!
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on June 19, 2014, 09:44:52 AM
What time is the wife coming in? Your trip looks amazing! The grizzly bears scare the chit out of me though lol!

....hence answering the age, old question..."Does the Jesse chit in the woods?"..... ;D  :huepfenlol2: :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on June 19, 2014, 09:47:19 AM

....hence answering the age, old question..."Does the Jesse chit in the woods?"..... ;D  :huepfenlol2: :2vrolijk_21:
In my pants in the presence of GRIZZLY BEARS  :P
Title: Re: What did you do to or on your CVO today?
Post by: Bigfoot16 on June 20, 2014, 06:25:23 PM
Installed the wireless antenna in the fairing and the cup holder for my wife.  Also went handlebar shopping...
Title: Re: What did you do to or on your CVO today?
Post by: CVO Aqua-Glider on June 20, 2014, 11:05:26 PM
Picked her up from the dealer who performed the ABS Brake recall and 5k service. I was surprised the bike actually stayed clean. Usually they hand it back to me dirty. :(

Also, went for a evening ride with my two brothers through some beautiful Missouri wine country. :)
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on June 21, 2014, 12:10:00 AM
picked it from dealer, got some new shoes & main bearing in the tranny. got 18k miles out of the front tire and wore out 2 rear tires in the same 18k miles  ???
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on June 21, 2014, 04:32:17 AM
Rode 455 miles.

Sent from my SCH-R970 using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: phato1 on June 21, 2014, 07:44:57 AM
Spent all day yesterday riding around the lakes region of NH. We're at Laconia bike week until Sunday.

Sent from my SCH-I545 using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: skorch on June 21, 2014, 07:57:12 AM
Installed The Wards Parts Werks cooling fan system! I just need to ride it and check 'em out!
Title: Re: What did you do to or on your CVO today?
Post by: Bigfoot16 on June 21, 2014, 10:59:33 AM
Rode 455 miles.

Sent from my SCH-R970 using Tapatalk

Groovy :)
Title: Re: What did you do to or on your CVO today?
Post by: Billy on June 21, 2014, 05:04:18 PM
Just received my Sena S20 headsets. looks like a week or two of learning all the features. But so far the voice quality is great in the garage Will soon see on the road
Title: Re: What did you do to or on your CVO today?
Post by: MrSurly on June 22, 2014, 02:34:20 AM
Hell yes they paid off you sneaky SOB. 

It's been maddening being unable to outrun you.

Phixtit 4U

:snicker:

Have a wheelie on me.p
Title: Re: What did you do to or on your CVO today?
Post by: CVOSE on June 22, 2014, 04:19:59 AM
At 50000 mls I discovered an oil leak. The bearings of the transmission are gone. So it's become a big puzzle to get all the parts together again. :o
Title: Re: What did you do to or on your CVO today?
Post by: cmashark on June 22, 2014, 09:33:47 PM
Rode it. Put some gas in it for tomorrow. Last tank logged 40.01 mpg. Not too shabby for a 110 with a stage 1.5 installed.


Chris
Title: Re: What did you do to or on your CVO today?
Post by: 05Train on June 22, 2014, 10:36:22 PM
Cleaned 3700 miles if road trip funk off of it.  Realized I killed my tires quickly.   
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on June 22, 2014, 10:57:46 PM
Put another 800 on in the last 2 days. Had the air cleaner come loose and the orings were leaking oil on my cylinder heads. Stopped at Thunder Harley in Chattanooga they hooked me up. Took me right in and even drove me to a cafe to eat then picked me up.

Sent from my SCH-R970 using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: hawkeye4jw on June 23, 2014, 04:39:18 AM
Put another 800 on in the last 2 days. Had the air cleaner come loose and the orings were leaking oil on my cylinder heads. Stopped at Thunder Harley in Chattanooga they hooked me up. Took me right in and even drove me to a cafe to eat then picked me up.

Sent from my SCH-R970 using Tapatalk

 Sucks you had to stop for repairs. But is nice to know you got good service. We have had to stop twice while traveling in the last 6 years and both times they had us back on the road in less then 1-1/2 hours.

 Ride Safe
 Jack
Title: Re: What did you do to or on your CVO today?
Post by: RoadMonkey on June 23, 2014, 04:07:10 PM
put her in "summer mode" Removed the front lowers and replaced with mustache bar.
Title: Re: What did you do to or on your CVO today?
Post by: harley.dad on June 26, 2014, 08:00:29 AM
The dealership just delivered my new/old 08 Ultra to the hosue, I'll be home from Afghanistan in less then 2 weeks to enjoy my new toy
Title: Re: What did you do to or on your CVO today?
Post by: CVO City Lights on June 26, 2014, 01:38:55 PM
 8)  Ordered RB Racing Blackhole exhaust.   :orange:
Title: Re: What did you do to or on your CVO today?
Post by: RoadMonkey on June 26, 2014, 03:38:00 PM
8)  Ordered RB Racing Blackhole exhaust.   :orange:
remember to show us when you get them on  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on June 26, 2014, 09:00:42 PM
Rode the moonshiner, hell bender, Dragon, and cherohala skyway.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on June 27, 2014, 05:08:11 AM
Nice, we'll be heading up to the Maryville TN, area next weekend on "Blue" via the Cherohala & US129: it's one of our favorite rides. 

We'll spend Fri, Sat & Sun cycling around the Great Smokey's with friends before heading back over the Dragon and Cherohala and down to Atlanta.

Just got the Bushtech out to make sure I remember how to pack our tandem bicycle and cycling gear in the trailer: it's been a while!

(http://tandemgeek.files.wordpress.com/2013/11/dscn0098.jpg?w=400) (http://tandemgeek.files.wordpress.com/2013/11/img_20131108_170117_822.jpg?w=560)
That is a perfect getaway. Enjoy. I'm nestled in at Fontana village tonight. Heading down to Asheville to pick up 26E to my friends in Hartsville, SC.  Have a room reservation at Myrtle Beach tomorrow night for a relaxing day before the return to Iowa.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on June 27, 2014, 08:21:56 AM
That is a perfect getaway. Enjoy. I'm nestled in at Fontana village tonight. Heading down to Asheville to pick up 26E to my friends in Hartsville, SC.  Have a room reservation at Myrtle Beach tomorrow night for a relaxing day before the return to Iowa.
Sorry we didn't catch up last night. Was an interesting day yesterday to say the least. Nothing went wrong but ended up being a long day.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on June 27, 2014, 08:52:52 AM
Sorry we didn't catch up last night. Was an interesting day yesterday to say the least. Nothing went wrong but ended up being a long day.
No problem! Next time. Ride Safe.

Jesse
Title: Re: What did you do to or on your CVO today?
Post by: redbeard719 on June 27, 2014, 04:30:30 PM
Another wash and detail followed by Royal Blue wax.  Love that stuff.  For a bike with 32K miles, it looks like it just rolled off the showroom floor!
Title: Re: What did you do to or on your CVO today?
Post by: bulawrench on June 27, 2014, 06:06:43 PM
After a long debate with myself and great advice from all you good folks...Woods 222 cams and pro pipe on the CVO Dyna. And loose the big radius 2 x 2.
So far the combo is a great stump puller.








Title: Re: What did you do to or on your CVO today?
Post by: michaelokielee@yahoo.com on June 28, 2014, 11:23:20 PM
Put the Tour Pak rack and Harley Davidson medallion on Tour Pak
Title: Re: What did you do to or on your CVO today?
Post by: 05Train on June 28, 2014, 11:47:52 PM
Two new tires to replace the ones I used up in ES.  Decided to try an American Elite on the front.  Stuck with the stocker on the back as there are no other options.


Sent from my iPad, probably while I'm pooping.
Title: Re: What did you do to or on your CVO today?
Post by: screaminCVO on June 29, 2014, 11:48:16 AM
Put the Tour Pak rack and Harley Davidson medallion on Tour Pak

Looks great - love the painted rack!
Title: Re: What did you do to or on your CVO today?
Post by: screaminCVO on June 29, 2014, 11:54:21 AM
New V&H Pro Pipe, SE ventilator, dyno, runs awesome. Liked it before and love it now. Love the look and fit of the Pro Pipe, a little louder than I would like and the one I had on my Dyna, but does sound great. Wanted to use Fullsac and dealer gave me the run around bull#%£€ about warranty crap using their pipes and tuner.
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on June 29, 2014, 12:33:46 PM
New V&H Pro Pipe, SE ventilator, dyno, runs awesome. Liked it before and love it now. Love the look and fit of the Pro Pipe, a little louder than I would like and the one I had on my Dyna, but does sound great. Wanted to use Fullsac and dealer gave me the run around bull#%£€ about warranty crap using their pipes and tuner.

So is the dealer claiming he will continue to honor the warranty with the V&H but not the Fullsac system  :nixweiss:
Hate to say it but that dealer seems to be a tool.......
Title: Re: What did you do to or on your CVO today?
Post by: SBB on June 29, 2014, 01:02:59 PM
Hate to say it but that dealer seems to be a tool.......

Or makes more money off the V&H system.

SBB


Title: Re: What did you do to or on your CVO today?
Post by: MrSurly on June 29, 2014, 02:20:40 PM
Probably more about the tuner than the pipe.
Title: Re: What did you do to or on your CVO today?
Post by: CVO Aqua-Glider on June 29, 2014, 04:09:02 PM
New V&H Pro Pipe, SE ventilator, dyno, runs awesome. Liked it before and love it now. Love the look and fit of the Pro Pipe, a little louder than I would like and the one I had on my Dyna, but does sound great. Wanted to use Fullsac and dealer gave me the run around bull#%£€ about warranty crap using their pipes and tuner.

 :worthless:
Title: Re: What did you do to or on your CVO today?
Post by: Supershooter on June 29, 2014, 10:14:19 PM
Put on a quick 100 mile loop, while I contemplated trading, among other issues.
Supershooter
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on June 29, 2014, 10:48:28 PM
Rode 630 miles. Trying to get home! 600 to go tomorrow!
Title: Re: What did you do to or on your CVO today?
Post by: redbeard719 on June 30, 2014, 12:15:51 AM
Rode 630 miles. Trying to get home! 600 to go tomorrow!

How was your trip to the Smokies, Jesse?
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on June 30, 2014, 05:06:39 AM
How was your trip to the Smokies, Jesse?
It was amazing. I posted a few pics in the original thread Chad.  I'll have a full write up once I get home.
Title: Re: What did you do to or on your CVO today?
Post by: tazmun on June 30, 2014, 01:35:41 PM
Or makes more money off the V&H system.

SBB



I agree with you Chip!
Title: Re: What did you do to or on your CVO today?
Post by: screaminCVO on July 01, 2014, 11:43:05 AM
:worthless:

I'll get pics asap. I think it was more of an issue with the TTS over the pipe and I am sure they make more off the V&H. Because of the difference in the US dollar right now, they don't think we can do the math!!
Title: Re: What did you do to or on your CVO today?
Post by: screaminCVO on July 02, 2014, 12:36:45 PM
:worthless:
Title: Re: What did you do to or on your CVO today?
Post by: screaminCVO on July 02, 2014, 12:40:28 PM
:worthless:

This shot is taken at Porteau Cove, hope everyone will get a chance to do this spectacular ride. We passed 3 transport trucks hauling bikes up for the HOG Rally in Squamish starting Thursday.
Title: Re: What did you do to or on your CVO today?
Post by: FLHTCUSE7 on July 02, 2014, 12:43:12 PM
Gotta love people that ship their bikes to a motorcycle rally.......
Title: Re: What did you do to or on your CVO today?
Post by: OBB on July 02, 2014, 01:37:52 PM
Gotta love people that ship their bikes to a motorcycle rally.......
Maybe there's health issues or time constraints making them do that. Dunno.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on July 02, 2014, 02:42:51 PM
Gotta love people that ship their bikes to a motorcycle rally.......

Could be their schedule or something of that nature. I have never done it myself. My boss trailers EVERYWHERE. Even 50 miles away to rallys LOL. I put more miles on my bike then he will all summer in the first month. To each his own though there are varying degrees of biker.
Title: Re: What did you do to or on your CVO today?
Post by: Bigfoot16 on July 02, 2014, 03:52:53 PM
Finishing the new bars and new tuner. Hope to finish this evening.
Title: Re: What did you do to or on your CVO today?
Post by: porthole on July 02, 2014, 08:49:25 PM
Maybe there's health issues or time constraints making them do that. Dunno.

1st time to MV with my wife - trailered
2nd time to MV with my wife - flew her down and picked her up (never do that again)
3rd time to MV with my wife - trailered
And if she decides to go this year - trailer

Some people are physically incapable of more then 2 hours or so a day riding.

Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on July 02, 2014, 09:35:09 PM
1st time to MV with my wife - trailered
2nd time to MV with my wife - flew her down and picked her up (never do that again)
3rd time to MV with my wife - trailered
And if she decides to go this year - trailer

Some people are physically incapable of more then 2 hours or so a day riding.
Amen Duane.
Title: Re: What did you do to or on your CVO today?
Post by: FLHTCUSE7 on July 02, 2014, 09:53:25 PM
I agree it's a personnal choice. My choice is that if I can't ride the MC there I am not going.

As long as I am riding stateside I can ride anywhere. Might ship it to Europe next year for a week of EU riding. But that is in an airplane not on a trailer
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on July 02, 2014, 09:57:21 PM
I guess shipping might make sense, if you are pressed for time, just not as much fun!
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on July 02, 2014, 09:59:41 PM
I agree it's a personnal choice. My choice is that if I can't ride the MC there I am not going.

As long as I am riding stateside I can ride anywhere. Might ship it to Europe next year for a week of EU riding. But that is in an airplane not on a trailer
That's where I am now but could change later who knows. I'm lucky my wife sits in the saddle for 650 mile days and never complains.
Title: Re: What did you do to or on your CVO today?
Post by: FLHTCUSE7 on July 02, 2014, 10:15:48 PM
I agree. That is very nice.

That's where I am now but could change later who knows. I'm lucky my wife sits in the saddle for 650 mile days and never complains.
Title: Re: What did you do to or on your CVO today?
Post by: FLHTCUSE7 on July 02, 2014, 10:16:42 PM
Sure. Personnal choice.

I guess shipping might make sense, if you are pressed for time, just not as much fun!
Title: Re: What did you do to or on your CVO today?
Post by: screaminCVO on July 02, 2014, 10:51:39 PM
That's where I am now but could change later who knows. I'm lucky my wife sits in the saddle for 650 mile days and never complains.

Mine to - only when she gets hungry, then gets a little VICIOUS!
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on July 02, 2014, 11:08:43 PM
Mine to - only when she gets hungry, then gets a little VICIOUS!
No doubt! That and her 10 minute get ready to ride ritual every time we stop! Lmao
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on July 02, 2014, 11:15:28 PM
Gotta love people that ship their bikes to a motorcycle rally.......
With all due respect, some people work a tremendous amount (65-80 hrs/6 days per week) and use their mc as their release on the 4 days a month that they are not working. It can be very difficult if the rally is a entire day or more away to be able to make it at all. If that is your lifestyle then why not ship your bike there, fly in when you can, ride and enjoy like crazy and then get back to "doing your thing" that allows you to be able to support all the people that depend on you (not to mention be able to afford this expensive hobby..) and put around 10000 miles a year loving it.
Its kinda one of those "until you walk a mile in my shoes" type of deals..
Title: Re: What did you do to or on your CVO today?
Post by: tysndys on July 02, 2014, 11:22:10 PM
You should walk a mile in someone's shoes before insulting them. That way they have to chase you barefoot, and you have a big head start.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on July 03, 2014, 08:07:07 AM
I agree it's a personnal choice. My choice is that if I can't ride the MC there I am not going.

As long as I am riding stateside I can ride anywhere. Might ship it to Europe next year for a week of EU riding. But that is in an airplane not on a trailer
Are you checking that bag sir or is that a carry on?  :huepfenlol2:

That just about sounds like a bucket list adventure.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on July 03, 2014, 08:08:08 AM
Going to pull it outside (in the rain) to wash it off real good and then back inside for a good cleaning.
Title: Re: What did you do to or on your CVO today?
Post by: porthole on July 03, 2014, 09:36:37 AM
Didn't do it yet, but will be going out in the garage to see just how bad the damage is from a dump truck that passed me last night with a full load of mud/dirt and a door that was not latched. A quick look last night under the mud shows at least one big divot on a bag lid and several chips in the fairing.
Title: Re: What did you do to or on your CVO today?
Post by: screaminCVO on July 03, 2014, 11:32:42 AM
With all due respect, some people work a tremendous amount (65-80 hrs/6 days per week) and use their mc as their release on the 4 days a month that they are not working. It can be very difficult if the rally is a entire day or more away to be able to make it at all. If that is your lifestyle then why not ship your bike there, fly in when you can, ride and enjoy like crazy and then get back to "doing your thing" that allows you to be able to support all the people that depend on you (not to mention be able to afford this expensive hobby..) and put around 10000 miles a year loving it.
Its kinda one of those "until you walk a mile in my shoes" type of deals..

Amen Brother!! Did the fly and ride thing many times. Now I left a bike in storage down in the desert so I can fly and ride my own!! Even if I had the time - its not fun riding the snowy mountain passes to get to sunshine. You do wut ya gotta do ta ride!!!
Title: Re: What did you do to or on your CVO today?
Post by: screaminCVO on July 03, 2014, 11:35:48 AM
No doubt! That and her 10 minute get ready to ride ritual every time we stop! Lmao

Yup - just like our bikes, very temperamental but still love em!!
Title: Re: What did you do to or on your CVO today?
Post by: Para Bellum on July 03, 2014, 09:50:26 PM
Put a new cover on the Springer's CycleShell ("garage"). Looks beauty-mous.
Title: Re: What did you do to or on your CVO today?
Post by: dahsen on July 03, 2014, 10:18:42 PM
Installed a Nightrider O2 enrichment devise...

Could not try it out because of bad weather but I can already tell that throttle response has improved!

Just hope that she will run colder and pinking will stop...

 :-\
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on July 04, 2014, 01:36:25 PM
Road trip over the Cherohala Skyway and through the Tail of the Dragon...

http://youtu.be/0-Fo-6CDEOc
Nice video.  Did that whole loop last week. Got chilly on the Cherohala.  My personal favorite was 28. Also loved 360 down from Vonore.
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on July 04, 2014, 06:09:49 PM
Moved the XM antenna outside the fairing to try it out on the tree-lined roads. Still debating if I'm gonna keep the XM subscription.










Nice video of the Dragon, one more week then we're headed there for a few days.  :2vrolijk_21:

Title: Re: What did you do to or on your CVO today?
Post by: cambo on July 06, 2014, 01:02:38 PM
Road trip over the Cherohala Skyway and through the Tail of the Dragon...

http://youtu.be/0-Fo-6CDEOc

Outstanding edit. You are talking me into getting a second GOPRO!!!

Technically 2 days ago, went to the Culpeper Antique car and bike show on the 4th. Lots of cool cars and bikes.

(https://farm4.staticflickr.com/3892/14575091111_970f67c441_b.jpg) (https://flic.kr/p/ocX9Nk)

(https://farm6.staticflickr.com/5572/14602504843_aa7be1ddb9_b.jpg) (https://flic.kr/p/ofnDWT)

(https://farm4.staticflickr.com/3906/14578392175_e663932dcb_b.jpg) (https://flic.kr/p/odf56e)

Title: Re: What did you do to or on your CVO today?
Post by: dayne66 on July 06, 2014, 02:32:38 PM
Moved the XM antenna outside the fairing to try it out on the tree-lined roads. Still debating if I'm gonna keep the XM subscription.














When I was in the market for a GPS.....I was debating between a 660 and a 665.....I called Xm/Sirius to see about a deal on two subs...one for the Jeep and one for the bike......would not budge on price....so I hung up and ordered the 660.
Now I have a free year in the new Jeep and am amazed at how poor the reception is....certainly glad I'm not paying for it!!
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on July 06, 2014, 03:00:47 PM
I dreamt about her. Called the dealer they got my Power Vision yesterday. Heads are due in tomorrow. Hope to pick her up with Sachs heads installed and new tune on Wednesday and make the 600 miles journey home!
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on July 06, 2014, 04:26:45 PM
Spent a couple hours washing and detailing the bike this morning while it was nice and cool out.
Will take her for a spin after I complete a couple projects around the house.
Title: Re: What did you do to or on your CVO today?
Post by: hawkeye4jw on July 06, 2014, 07:13:35 PM
When I was in the market for a GPS.....I was debating between a 660 and a 665.....I called Xm/Sirius to see about a deal on two subs...one for the Jeep and one for the bike......would not budge on price....so I hung up and ordered the 660.
Now I have a free year in the new Jeep and am amazed at how poor the reception is....certainly glad I'm not paying for it!!

Mounted my 660 this weekend and changed the hanging bracket on one of the saddlebags.

Jack
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on July 06, 2014, 07:35:04 PM
went on run FREEMAN RIDE won $50 bucks for best looking bike  ::) and rolled 20k miles with the cruise set on 115 mph...i just love this thing  ;)
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on July 06, 2014, 07:36:33 PM
went on run FREEMAN RIDE won $50 bucks for best looking bike  ::) and rolled 20k miles with the cruise set on 115 mph...i just love this thing  ;)

Man I didn't even make it to 19k with a major engine failure  >:(
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on July 06, 2014, 07:44:19 PM
Man I didn't even make it to 19k with a major engine failure  >:(
     your gona be back in the wind before you know it...keep your head up   :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on July 06, 2014, 07:46:22 PM
     your gona be back in the wind before you know it...keep your head up   :2vrolijk_21:
Freddy I got 575 miles to the house hopefully starting the journey Wednesday!
Title: Re: What did you do to or on your CVO today?
Post by: bjspearman04 on July 06, 2014, 07:59:32 PM
Took a short ride from Virginia Beach, Va to Rocky Mount, NC and back. Had not ridden in almost 90 days; Had 8 hours of surgery to repair my broken tibia plataue - Got to say my orthopedic surgery was excellent!!! And the ride on my 2013 EG was much needed.  Stopped by Church to thank God for His blessing and rode some more - started breaking in my new motor received at the 19,500 mark. 
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on July 06, 2014, 08:35:51 PM
Took a short ride from Virginia Beach, Va to Rocky Mount, NC and back. Had not ridden in almost 90 days; Had 8 hours of surgery to repair my broken tibia plataue - Got to say my orthopedic surgery was excellent!!! And the ride on my 2013 EG was much needed.  Stopped by Church to thank God for His blessing and rode some more - started breaking in my new motor received at the 19,500 mark.

Glad to hear!  :bananarock:
Title: Re: What did you do to or on your CVO today?
Post by: LARK on July 07, 2014, 01:21:00 AM
Installed the Premium Ride Cartridge Fork Kit. A bit of a pain playing McGiver rigging up a spring compressor but it worked out. Less dive under braking and the ride feels firm without being harsh like the stock setup.
Title: Re: What did you do to or on your CVO today?
Post by: Bigfoot16 on July 08, 2014, 08:40:01 PM
Put on my new Freedom shield, got ready for bike night.. then watched it pour down rain from a cloud out of nowhere...  Oh well, at least the windshield looks nice...
Title: Re: What did you do to or on your CVO today?
Post by: porthole on July 08, 2014, 09:52:31 PM
Disappointing dyno run then a new rear tire.
Title: Re: What did you do to or on your CVO today?
Post by: RoadMonkey on July 09, 2014, 11:25:32 AM
burning fuel and wearing down rubber  .....went to stare at a cvo softail for sale
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on July 10, 2014, 12:08:32 AM
Put 600 miles on my new heads
Title: Re: What did you do to or on your CVO today?
Post by: OBB on July 10, 2014, 05:57:59 AM
Put 600 miles on my new heads
:2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: hawkeye4jw on July 10, 2014, 08:13:49 AM
Put 600 miles on my new heads

 Glad you got it back.

jack
Title: Re: What did you do to or on your CVO today?
Post by: Rooster on July 10, 2014, 08:52:56 AM
Put 600 miles on my new heads
Ah now that is what I wanted to hear. Have a safe trip hope all is much better and safe travels.
Title: Re: What did you do to or on your CVO today?
Post by: Dave L on July 10, 2014, 09:37:26 PM
Added new intake today
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on July 11, 2014, 05:21:04 AM
Added new intake today
Nice!!
Title: Re: What did you do to or on your CVO today?
Post by: OBB on July 11, 2014, 05:30:51 AM
Replace my PIAA bulbs with new ones. Lost one of my high beams at 31k.
Title: Re: What did you do to or on your CVO today?
Post by: RoadMonkey on July 11, 2014, 10:09:06 AM
Added new intake today
that is cool  :2vrolijk_21: I like that one
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on July 13, 2014, 03:03:30 PM
Got a badly needed oil change yesterday.  :huepfenjump3:
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on July 13, 2014, 03:07:08 PM
Got a badly needed oil change yesterday.  :huepfenjump3:

Stu I haven't rode mine yet today but I did just talk to Sachs for almost 2 hours that's gotta be equal to driving a million miles!  ;D Love that guy!
Title: Re: What did you do to or on your CVO today?
Post by: Bigfoot16 on July 13, 2014, 06:19:52 PM
Went for a ride with my brother in law and sister.  They are on the edge of joining the CVO family.. most likely getting one this week :)
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on July 13, 2014, 06:23:21 PM
He's the man!  I was with him yesterday.   We had a blast.  :D
Title: Re: What did you do to or on your CVO today?
Post by: kiro on July 13, 2014, 07:05:48 PM
Well, it wasn't today, but I recently added a Brukus Boot Shield to my ride. Works great - no more boot heel burning onto the rear pipe and they offer CVO forum members a discount.
Title: Re: What did you do to or on your CVO today?
Post by: FLHTCUSE7 on July 13, 2014, 10:02:18 PM
Rode 274 miles. Another 240ish tomorrow. Another 500 on Wednesday and then another 500 on. Friday. Not much but it's a work trip and sure beats driving or flying
Title: Re: What did you do to or on your CVO today?
Post by: RoadMonkey on July 14, 2014, 10:00:11 AM
Rode 274 miles. Another 240ish tomorrow. Another 500 on Wednesday and then another 500 on. Friday. Not much but it's a work trip and sure beats driving or flying
sweet  :2vrolijk_21: and agreed
Title: Re: What did you do to or on your CVO today?
Post by: hawkeye4jw on July 14, 2014, 04:01:26 PM
 Had to have a new rear tire put on mine yesterday.  :(

jack
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on July 14, 2014, 07:16:56 PM
Had to have a new rear tire put on mine yesterday.  :(

jack
   how many miles you get out of the other tire ?
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on July 14, 2014, 07:38:46 PM
I'm blaming Jimmy (2K) for planting the idea:
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on July 14, 2014, 07:41:34 PM
Actually I wanted to provide a little "fill in" lighting to the area directly in front of the bike - under the LED's if that makes sense, and off to the edge of the roadway since the LED's don't "spill" light off to the sides as much as the Halogens.  I still need to finalize the aiming of them, but they are mounted and working  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on July 14, 2014, 07:44:58 PM
last pic:
Title: Re: What did you do to or on your CVO today?
Post by: hawkeye4jw on July 15, 2014, 04:44:24 AM
   how many miles you get out of the other tire ?

 Just over 11,000 miles. On my 09 I got 16,000 to 18,000 on a rear. The bike did have 7,000 miles when I bought it though.

Ride Safe
 Jack
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on July 15, 2014, 02:48:18 PM
Just over 11,000 miles. On my 09 I got 16,000 to 18,000 on a rear. The bike did have 7,000 miles when I bought it though.

Ride Safe
 Jack
Seems to be the norm.  I got 12k from the rear tire before the noise and handling in the corners drove me nuts.
Title: Re: What did you do to or on your CVO today?
Post by: RoadMonkey on July 15, 2014, 02:52:19 PM
Put on the sundowner seat and the short windshield for the trip! Florida, her I come (again)  ;) Guessing to be about a 1500 mile weekend riding adventure!!
Title: Re: What did you do to or on your CVO today?
Post by: hawkeye4jw on July 15, 2014, 03:57:01 PM
Seems to be the norm.  I got 12k from the rear tire before the noise and handling in the corners drove me nuts.

If we weren't leaving on a trip next week I probably would of held off for another 1,000 miles. Never noticed any noise from the tire, but you sure notice a difference in handling when you put the new tire on.  ;D Here in Indiana there isn't allot of twisty roads.

Ride Safe
 Jack
Title: Re: What did you do to or on your CVO today?
Post by: hawkeye4jw on July 15, 2014, 03:59:23 PM
Actually I wanted to provide a little "fill in" lighting to the area directly in front of the bike - under the LED's if that makes sense, and off to the edge of the roadway since the LED's don't "spill" light off to the sides as much as the Halogens.  I still need to finalize the aiming of them, but they are mounted and working  :2vrolijk_21:

 I like the new lights.

Jack
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on July 29, 2014, 10:35:13 PM
Changed the fluid in all 3 holes. Mobil 1 20W50 in the engine, Mobil 1 Racing 4t 10W40 in the primary, and Bel Ray transmission fluid in the tranny.
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on July 30, 2014, 07:37:07 AM
last pic:


What brand of Light are those you added?

Title: Re: What did you do to or on your CVO today?
Post by: phato1 on July 30, 2014, 07:44:00 AM

What brand of Light are those you added?
They're the 3" Kuryakyn lights that mount to the fender mounting bolts.
Title: Re: What did you do to or on your CVO today?
Post by: SBB on July 30, 2014, 08:01:15 AM
I'm blaming Jimmy (2K) for planting the idea:

That Jimmy is an evil, evil Harley man.
 ;D

Mr. phato, my Blue Bike Brother I think a final addition of the Custom Dynamics LED Ringz would finish off the front end of that beautiful bike.
What you think?

SBB


Title: Re: What did you do to or on your CVO today?
Post by: phato1 on July 30, 2014, 08:14:34 AM
That Jimmy is an evil, evil Harley man.
 ;D

Mr. phato, my Blue Bike Brother I think a final addition of the Custom Dynamics LED Ringz would finish off the front end of that beautiful bike.
What you think?

SBB



There goes some more cash..
Title: Re: What did you do to or on your CVO today?
Post by: 05Train on July 30, 2014, 08:15:43 AM
Returned it to stock-ish form pending trading it in.
Title: Re: What did you do to or on your CVO today?
Post by: Bigfoot16 on July 30, 2014, 08:34:35 AM
Returned it to stock-ish form pending trading it in.

What bike are you trading for?
Title: Re: What did you do to or on your CVO today?
Post by: 05Train on July 30, 2014, 08:36:02 AM
What bike are you trading for?
K1600 GTL.

(http://i48.photobucket.com/albums/f229/rthomp159/2013-BMW-K1600GTL4_zpsa53a8655.jpg) (http://s48.photobucket.com/user/rthomp159/media/2013-BMW-K1600GTL4_zpsa53a8655.jpg.html)
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on July 30, 2014, 09:39:04 AM
Train let us know the pluses and minuses vs the cvo after a few rides.
Title: Re: What did you do to or on your CVO today?
Post by: dayne66 on July 30, 2014, 10:13:32 AM
Train let us know the pluses and minuses vs the cvo after a few rides.
From my limited experience with BMW riders......you may get more bugs up your nose as it will be up in the air.
Title: Re: What did you do to or on your CVO today?
Post by: 05Train on July 30, 2014, 10:15:38 AM
Train let us know the pluses and minuses vs the cvo after a few rides.
Will do.  I did an extended test ride on one, and was blown away by just about everything about it.
Title: Re: What did you do to or on your CVO today?
Post by: Bigfoot16 on July 30, 2014, 10:37:05 AM
Nice looking bike. A friend of mine just came back from a trip out west on his. He said the bike performed well but had to stop and get new tires to make it home. He only got 3000 miles out of the old ones. That was very disappointing to him. Understandably so.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on July 30, 2014, 10:48:40 AM
Will do.  I did an extended test ride on one, and was blown away by just about everything about it.
I've read up on them. Suspension and engine power are impressive. The biggest problem I have is the looks. Just can't hold a candle to my CVO. Don't care for the rider position as well. But probably the most important issue is my wife don't like them so no use in going any further lol.
Title: Re: What did you do to or on your CVO today?
Post by: 05Train on July 30, 2014, 12:20:17 PM
I didn't care for my RT at all.  My GS Adventure on the other hand was more fun than should be allowed on two wheels.  That bike oozed character, and the wife loved riding on the back (which is bizarre, since she's only 5'2" tall).  Were it not for outrageous oil consumption, I'd still have that bike.

The K16 has more of a relaxed, upright (rather than arms forward and feet back) position that is comfortable for me.  Of course, I'll still add highway pegs, but that's just a no-brainer.  There's no getting around the fact though that they're just not pretty bikes (in the same way a Harley is).  My GS/A was badass to look at, but it wasn't a, "damn that bike looks good" at the gas pump sort of bike.

The K16 ain't either, though it's far from ugly.

I dunno, we'll see what happens at the dealer.  I'll either spend the weekend putting everything back on my bike, or loading down the classified section with a bumper crop of parts.
Title: Re: What did you do to or on your CVO today?
Post by: JoeVibe on July 30, 2014, 01:06:52 PM
They're the 3" Kuryakyn lights that mount to the fender mounting bolts.

Two questions.

Do you happen to have the part number? I looked on Kuryakyn's site but couldn't find them.

Any idea how they compare to Moto Lights?

Thanks,

Joe
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on July 30, 2014, 01:38:21 PM
Two questions.

Do you happen to have the part number? I looked on Kuryakyn's site but couldn't find them.

Any idea how they compare to Moto Lights?

Thanks,

Joe
The Kuryakyn p/n is 5008. They are H3 halogen bulbs and so far have met my goal of filling in the area under the Daymakers with light. If you have a pile of extra cash laying around they sell an LED conversion for them -- but it's a few hundred bucks for that in addition to the $350 that the lights cost. I skipped that because I wanted the light to "spill" more than the LED's do.

I can't directly compare them to Motolights because no one I ride with has those. I can say the installation of the Kury ones was straightforward and clean.
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on July 30, 2014, 02:15:25 PM
Walked by the bike this morning before work.  This nice weather in St. Louis is killing, me since I have not been able to ride since Sunday.  Planning on going on a 100 mile ride tomorrow between projects.
Title: Re: What did you do to or on your CVO today?
Post by: Lever on July 30, 2014, 02:28:12 PM
Yeah has been some great riding weather here lately
Title: Re: What did you do to or on your CVO today?
Post by: CVO2FIXUP on July 30, 2014, 04:33:23 PM
 Collecting parts to do a big upgrade.  So far got a 58 mm TB, Merell Injectors, and just arrived is my new pipe. A V&H stainless Pro Pipe.  What a sweet piece of equipment. Will see what the dino  reads after the install in late Sept.
Title: Re: What did you do to or on your CVO today?
Post by: CVO2FIXUP on July 30, 2014, 04:35:53 PM
Injectors.
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on August 03, 2014, 10:20:40 PM
Took just over a 100 mile ride with my better half. Every time we ride two up, I'm always impressed with the handling of the Breakout. 
Title: Re: What did you do to or on your CVO today?
Post by: scttgr8 on August 04, 2014, 10:11:39 PM
just another day in the garage...
Title: Re: What did you do to or on your CVO today?
Post by: RoadMonkey on August 05, 2014, 03:08:58 PM
a little wash and dry... 5k service scheduled for tomorrow
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on August 05, 2014, 04:20:40 PM
Took her in for the 15K service.   :2vrolijk_21:




put 5K on her in the last 3 months alone. It'll be time for some serious lovin on the bike this winter. (unless I spy a hellva good looking 2015 model before then, which looks doubtful).


Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on August 05, 2014, 07:58:25 PM
Put 200 miles on it with the squeeze on the back. Pulled into the garage just in time. Rain started a few minutes later!  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Bigfoot16 on August 05, 2014, 09:11:48 PM
Took mine in for the 1,000 mile service.....and bought some luggage for the labor day trip to Charleston
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on August 10, 2014, 03:10:12 PM
 

Installed led light bar and screaming Eagle emblem on my your pak.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on August 10, 2014, 03:14:53 PM
With brake on
Title: Re: What did you do to or on your CVO today?
Post by: owl893 on August 10, 2014, 04:20:06 PM
sharp lookin' setup Jesse...................

OWL
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on August 10, 2014, 07:48:54 PM
With brake on

Looks great! did you happen to wire up the outside TP lights to be run/turn?
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on August 10, 2014, 08:22:38 PM
Looks great! did you happen to wire up the outside TP lights to be run/turn?
Thanks John.

Phato not yet. That's on my agenda.
Title: Re: What did you do to or on your CVO today?
Post by: Jock on August 10, 2014, 08:39:41 PM
Replaced the compensator and rotor...preparing for the Valley!

 :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: cmashark on August 11, 2014, 02:03:52 AM
spent the day looking at pictures of it and thinking about it... the Navy has me out in NV for a couple weeks.  :(
Title: Re: What did you do to or on your CVO today?
Post by: OBB on August 11, 2014, 06:57:07 AM
Finished the second day of vacation getting to NH for the annual RG GTG called shark Week. Nice views up here in New England  but the road conditions are nothing like the Smokies. 162 bikes registered for this event. Should be a great time.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on August 11, 2014, 08:53:49 AM
Finished the second day of vacation getting to NH for the annual RG GTG called shark Week. Nice views up here in New England  but the road conditions are nothing like the Smokies. 162 bikes registered for this event. Should be a great time.

Have fun and ride safe.
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on August 11, 2014, 09:09:28 AM
I like the lights and SE emblem, Jesse.  You just can't have enough lights on the rear of a bike....as the red riding hood wolf stated..."the better to see you with".
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on August 11, 2014, 09:15:34 AM
I like the lights and SE emblem, Jesse.  You just can't have enough lights on the rear of a bike....as the red riding hood wolf stated..."the better to see you with".

I agree. Any longer trips or cooler weather and that tour pak is on and I always worried about the way it kind of hangs out over the ass and detracts from the taillights. That LED light bar is pretty too IMO. I got a great deal on it from a forum member but the trim was in Cobalt blue as it came off a 2010 CVO Ultra. I sent the bezel to Joe @xtreme and he absolutely nailed it and I thought it was cheap as well. All came together nicely. Really think the screaming eagle emblem sets it all off.
Title: Re: What did you do to or on your CVO today?
Post by: dayne66 on August 11, 2014, 11:47:35 AM
Put bugs all over the front of it! ...on an Okanogan trip.

Title: Re: What did you do to or on your CVO today?
Post by: screaminCVO on August 11, 2014, 01:40:49 PM
Washington Hwy 101 around Olympic Penninsula. Fantastic!!!! Great weather and scenery. Stayed at Little Creek Casino. Great place, comfy beds - good food.
Title: Re: What did you do to or on your CVO today?
Post by: OhioDave on August 11, 2014, 04:52:12 PM
Today.... I installed the THIRD compensator....they get changed more often than the spark plugs.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on August 11, 2014, 05:08:39 PM
Today.... I installed the THIRD compensator....they get changed more often than the spark plugs.

WOW how many miles you got?
Title: Re: What did you do to or on your CVO today?
Post by: PinkE on August 11, 2014, 06:39:46 PM
Looks awesome Jesse... :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: dooinit2u on August 11, 2014, 09:41:45 PM
Washed my SEUC from our trip to Sturgis. She got a bath, a wax with some Royal Blue and all the chrome polished.

I gotta be on my game to arrive in MV, We all know how critical that place is...LMAO.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on August 11, 2014, 10:39:00 PM
Looks awesome Jesse... :2vrolijk_21:

Thank you!  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Ohio phil on August 12, 2014, 06:29:31 AM
At Shark week in gorham New Hampshire had to replace a battery it was cranking sloooow, went to O'reilly $139  :)
Title: Re: What did you do to or on your CVO today?
Post by: OBB on August 12, 2014, 06:45:43 AM
At Shark week in gorham New Hampshire had to replace a battery it was cranking sloooow, went to O'reilly $139  :)
You better get out here and wipe that beauty down. We can't be representing Ohio with your bike having water spots.
Title: Re: What did you do to or on your CVO today?
Post by: OhioDave on August 12, 2014, 08:16:02 PM
WOW how many miles you got?

Just under 47000....
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on August 21, 2014, 09:01:55 PM
Ordered garage door opener, hopefully will be in on Saturday, so I can install Sunday.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on August 21, 2014, 09:40:20 PM
Rode it to the dealer today to talk about trading up. We'll see what the new colors are like.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on August 21, 2014, 09:44:38 PM
Rode it to the dealer today to talk about trading up. We'll see what the new colors are like.
Say it ain't so! I can't imagine getting all the mods done all over again and the seat and handlebars the way i want them. I finally have mine the way i want it minus a couple tiny things. I honestly haven't had a single new bike catch my eye from hd since 12. Maybe the 15 cvo sg will but i doubt it.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on August 21, 2014, 09:50:33 PM
Say it ain't so! I can't imagine getting all the mods done all over again and the seat and handlebars the way i want them. I finally have mine the way i want it minus a couple tiny things. I honestly haven't had a single new bike catch my eye from hd since 12. Maybe the 15 cvo sg will but i doubt it.
Considering that my bike can pretty much be return to stock in less than a day (other than the bars) and I can sell off the stretched bags and fascia, I don't have a real attachment to it that I can't overcome with a new bike.  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on August 21, 2014, 09:52:23 PM
Considering that my bike can pretty much be return to stock in less than a day (other than the bars) and I can sell off the stretched bags and fascia, I don't have a real attachment to it that I can't overcome with a new bike.  :2vrolijk_21:
No biggy for you then. I feel opposite. I've never owned any thing that I admire the way I do this scoot. She's a beauty.

Good luck on your new purchase.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on August 21, 2014, 09:59:01 PM
No biggy for you then. I feel opposite. I've never owned any thing that I admire the way I do this scoot. She's a beauty.

Good luck on your new purchase.
I feel that same way about one of my Avalanches. It'll get passed on to my nephew some day. Waaayyy  too much sweat labor involved in that one.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on August 21, 2014, 10:01:22 PM
I feel that same way about one of my Avalanches. It'll get passed on to my nephew some day. Waaayyy  too much sweat labor involved in that one.
So you know what I mean :) My wife feels the same way so you KNOW how that goes lol.
Title: Re: What did you do to or on your CVO today?
Post by: Kilaani on August 23, 2014, 03:36:09 PM
Say it ain't so! I can't imagine getting all the mods done all over again and the seat and handlebars the way i want them. I finally have mine the way i want it minus a couple tiny things. I honestly haven't had a single new bike catch my eye from hd since 12. Maybe the 15 cvo sg will but i doubt it.

I feel the same, Jesse! I know Ken has said it, too about a Buster Honey Badger! I can't ever imagine selling Scarlett for any reason. I maybe will get a trike someday long in the future, but I have heard there are even conversions. No bike has caught my eye since. There are pretty ones, but I love what I've got!
Title: Re: What did you do to or on your CVO today?
Post by: FLHTCUSE7 on August 23, 2014, 06:25:30 PM
Anything mechanical is just a toy for me, easy come easy go. I owned 29 motorcycles so far and don't miss any of them.

Only mechanical item I am attached to is my first side arm. Don't carry it anymore but keep it in the safe. Been to to many interesting places together  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Mandrew13 on August 23, 2014, 06:28:20 PM
Hit some back road twisties to break in the new rear tire.
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on August 24, 2014, 01:23:44 PM
Didn't ride it but took it down to no side covers, bags or seat and gave it a thorough cleaning after a couple weeks of riding in the rain to work. Just got through and the sky opened up yet again. At least it's clean and dry in the garage ready for the Monday commute... ;D
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on August 24, 2014, 01:49:08 PM
90 degrees today. Perfect for sticking some rubber into the turns. Heading out now!  :coolblue:
Title: Re: What did you do to or on your CVO today?
Post by: Bigfoot16 on August 25, 2014, 08:26:40 AM
Went for a "practice run" with bike loaded down for the trip next week.  Also installed and tested the headsets on the helmet I never wear. Bike handled great fully loaded.
Title: Re: What did you do to or on your CVO today?
Post by: MGCVO on August 26, 2014, 12:44:18 PM
Added 2 into 1 rineharts. Much louder than I wanted but I will get used to it.
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on August 26, 2014, 12:50:56 PM
What I did on my CVO today.....rode to work and looked at the new 2015's before the morning meeting....decided thare ain't nuttin that can pry Ginger out of my hands this model year....went outside, looked at my 2012 and had a really big smile on my face.....will have that same smile on the way home this afternoon.....
I like my 2012 and all the fun/issues that came with her.  It's why I spent the $30K or so in the first place.  My plan in March 2012 was to keep it for many, many years.  After 2 1/5 years and 25K miles, nothing has changed my mind.
Ride safe, fun and keep it between the ditches...

UPDATE:  just saw the blue and orange 15 SESG. Sho b purdy. But nope, keeping my 12 :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on August 26, 2014, 09:57:12 PM
I took a ride to a dealership 115 miles NW of me on my old worn out 2012 CVO SG. Goddamn I love that bike 21k and counting!
Title: Re: What did you do to or on your CVO today?
Post by: CVOBreak on August 27, 2014, 07:56:12 AM
Made another appointment with the dealer to look at yet another issue. Geez this is getting old.
Title: Re: What did you do to or on your CVO today?
Post by: Tractor Bubba on August 27, 2014, 07:29:32 PM
Got drenched in a monsoon last time out, so gave my '14 SERK it's first bath.

Then put on two coats of carnauba (man, those Agitator wheels may look great,
but are a pain in the ...'hands'...to clean!) and took her for a couple hours' spin.

The bride doesn't understand how a good detailing can take HOURS!
Maybe she's jealous?

TBubba
Title: Re: What did you do to or on your CVO today?
Post by: Supershooter on August 28, 2014, 05:42:36 PM
Today, I wait for the dealer to fix my CVO, the heated hand grip quit working, it also lost the bolts holding the head pipe on, and it need a 30K service. I hope to pick it up this weekend and check out the new bikes.
Supershooter
Title: Re: What did you do to or on your CVO today?
Post by: RichardGee on August 29, 2014, 01:34:19 AM
Well, After getting my 2012 home from Las Vegas, I detailed her completely. What a BEAUTY! My ONLY complaint after 700 miles is that the after market mufflers are a bit too loud for my tastes. I prefer a quiet rumble to a dull ROAR :D  I would like to TRADE these muffler for stock HD CVO mufflers in similar (immaculate) condition. These have 3000 miles on them. Any takers?
More pictures on request...
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on August 29, 2014, 02:42:45 PM
Well, After getting my 2012 home from Las Vegas, I detailed her completely. What a BEAUTY! My ONLY complaint after 700 miles is that the after market mufflers are a bit too loud for my tastes. I prefer a quiet rumble to a dull ROAR :D  I would like to TRADE these muffler for stock HD CVO mufflers in similar (immaculate) condition. These have 3000 miles on them. Any takers?
More pictures on request...

Could you put a different baffle in these pipes? Maybe that would do the trick to tone it down a bit, vs. changing out the whole exhaust.
Title: Re: What did you do to or on your CVO today?
Post by: Digital on August 29, 2014, 02:52:43 PM
Yesterday - I rode it 679 miles to the Upper Peninsula of MI and back to Detroit.  Also had just picked up the powdercoated windshield hardware and put it together for the ride.

(http://i1239.photobucket.com/albums/ff505/Digital1976/FD52592A-82C9-49C5-8421-31C129076C19_zpssbezjlv0.jpg) (http://s1239.photobucket.com/user/Digital1976/media/FD52592A-82C9-49C5-8421-31C129076C19_zpssbezjlv0.jpg.html)

(http://i1239.photobucket.com/albums/ff505/Digital1976/DA075765-7EB3-4CA0-8EB0-5339CC4EAC9C_zpsdevpf5lp.jpg) (http://s1239.photobucket.com/user/Digital1976/media/DA075765-7EB3-4CA0-8EB0-5339CC4EAC9C_zpsdevpf5lp.jpg.html)

(http://i1239.photobucket.com/albums/ff505/Digital1976/EE7A6A4A-2526-488C-95C3-0D2FB3BEAEF7_zpsijl8jpr6.jpg) (http://s1239.photobucket.com/user/Digital1976/media/EE7A6A4A-2526-488C-95C3-0D2FB3BEAEF7_zpsijl8jpr6.jpg.html)

Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on August 29, 2014, 06:31:28 PM
picked it up from dealer...had another compensator replaced, the updated one was put in this spring and only lasted 10k miles. may have beat on it to much? probably wont have it long enough to know if this one will last...cause its trade in season  ;)
Title: Re: What did you do to or on your CVO today?
Post by: cmashark on August 29, 2014, 07:34:59 PM
Used mine to requal my Navy required MSF course. No complaints from me... Kinda nice to get paid to ride your bike.  :pepper:
Title: Re: What did you do to or on your CVO today?
Post by: RichardGee on August 29, 2014, 07:44:36 PM
Could you put a different baffle in these pipes? Maybe that would do the trick to tone it down a bit, vs. changing out the whole exhaust.

That may be a solution, but I am also a stickler for STOCK and would be happier if the bike were 100% original. These mufflers are beautiful, and do sound really good, but they are not stock and too noisy for my tastes, so quieting them with different baffles would resolve one issue, but not the other.
Title: Re: What did you do to or on your CVO today?
Post by: Supershooter on August 29, 2014, 09:45:41 PM
Had the dealer busting my balls that I need to pay for additional labor on a warranty issue. Not impressed! We'll see how well they treat me tomorrow.
Supershooter
Title: Re: What did you do to or on your CVO today?
Post by: geezerglide on August 29, 2014, 10:31:15 PM
Changed fluids in all three holes, Red Line 20W/50, MTL in Primary and HD Shockproof in tranny.

Hardwired my old Zumo 550 to the wiring in fairing, tried a Zumo 660, didn't like it prefer my Zumo 550.

Installed and wired a Permanent Gerbing Temperature Controller on the left mid frame heat deflector.

Installed a my  Rebuilt by Traxxion Dynamic set of Bitubos Shocks. Had original set since 2010, thought it was time for a rebuild.

Greased neck bearings.

Now i am ready for my fall ride to Phoenix.

geezerglide
Title: Re: What did you do to or on your CVO today?
Post by: willyB on August 31, 2014, 06:40:46 AM
The wife and I took ours out for a couple of short runs yesterday while the clouds looked safe.

YES, we found rain on both rides! :bananarock:

We didn't mind too much. Actually felt kind of nice.
Title: Re: What did you do to or on your CVO today?
Post by: wachuko on August 31, 2014, 09:44:37 AM
Added a few things to it:

Custom Dynamics Turn signal/driving lights

(http://i151.photobucket.com/albums/s144/wachuko/Motorcycles/RK%20CVO/191AA8A1-3254-4B10-9DCB-5002726D2E6F_zpsz450nhap.jpg)

Jiffy stand extension (after the photo I realized the bolt was installed correctly and fixed it... )

(http://i151.photobucket.com/albums/s144/wachuko/Motorcycles/RK%20CVO/DSC09679_zps293443d3.jpg)

Cup and phone holders

(http://i151.photobucket.com/albums/s144/wachuko/Motorcycles/RK%20CVO/DSC09667_zps37df7b36.jpg)

Highway pegs

(http://i151.photobucket.com/albums/s144/wachuko/Motorcycles/RK%20CVO/DSC09668_zps14f69e4e.jpg)

(http://i151.photobucket.com/albums/s144/wachuko/Motorcycles/RK%20CVO/DSC09659_zps31f47719.jpg)

Heat Shields

(http://i151.photobucket.com/albums/s144/wachuko/Motorcycles/RK%20CVO/DSC09670_zps5ba1c617.jpg)

Tag Frame (but looking for a curved and better looking option)

(http://i151.photobucket.com/albums/s144/wachuko/Motorcycles/RK%20CVO/DSC09662_zps97cc5821.jpg)

I have these..

(http://i151.photobucket.com/albums/s144/wachuko/Motorcycles/RK%20CVO/DSC09655_zpsf6cadcad.jpg)

But love the clean look and will not install them until I really have to use the passenger backrest or carry something...

(http://i151.photobucket.com/albums/s144/wachuko/Motorcycles/RK%20CVO/DSC09693_zps930ce84c.jpg)

Eliminated the rear shifter and installed the chrome cover

(http://i151.photobucket.com/albums/s144/wachuko/Motorcycles/RK%20CVO/DSC09676_zpsaa0616c8.jpg)

Next on the list is the clear guard kit for the saddlebags

(http://i151.photobucket.com/albums/s144/wachuko/Motorcycles/RK%20CVO/DSC09694_zpsa45e51d4.jpg)

And the HeadWinds brake caliper lights that match the tip of the exhaust (sadly, these lights are no longer available...very glad I took the off when I did the trade it)

(http://forums.rennlist.com/upload/dsc05504sm.jpg)

I have them with LEDs

(http://i151.photobucket.com/albums/s144/wachuko/RGC-CVO/DFFE66CE-C828-4E7B-B035-35B8B8CDE244_zpsufbntjpt.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on August 31, 2014, 09:52:18 AM
Added a few things to it:

Custom Dynamics Turn signal/driving lights

(http://i151.photobucket.com/albums/s144/wachuko/Motorcycles/RK%20CVO/191AA8A1-3254-4B10-9DCB-5002726D2E6F_zpsz450nhap.jpg)

Jiffy stand extension (after the photo I realized the bolt was installed correctly and fixed it... )

(http://i151.photobucket.com/albums/s144/wachuko/Motorcycles/RK%20CVO/DSC09679_zps293443d3.jpg)

Cup and phone holders

(http://i151.photobucket.com/albums/s144/wachuko/Motorcycles/RK%20CVO/DSC09667_zps37df7b36.jpg)

Highway pegs

(http://i151.photobucket.com/albums/s144/wachuko/Motorcycles/RK%20CVO/DSC09668_zps14f69e4e.jpg)

(http://i151.photobucket.com/albums/s144/wachuko/Motorcycles/RK%20CVO/DSC09659_zps31f47719.jpg)

Heat Shields

(http://i151.photobucket.com/albums/s144/wachuko/Motorcycles/RK%20CVO/DSC09670_zps5ba1c617.jpg)

Tag Frame (but looking for a curved and better looking option)

(http://i151.photobucket.com/albums/s144/wachuko/Motorcycles/RK%20CVO/DSC09662_zps97cc5821.jpg)

I have these..

(http://i151.photobucket.com/albums/s144/wachuko/Motorcycles/RK%20CVO/DSC09655_zpsf6cadcad.jpg)

But love the clean look and will not install them until I really have to use the passenger backrest or carry something...

(http://i151.photobucket.com/albums/s144/wachuko/Motorcycles/RK%20CVO/DSC09693_zps930ce84c.jpg)

Eliminated the rear shifter and installed the chrome cover

(http://i151.photobucket.com/albums/s144/wachuko/Motorcycles/RK%20CVO/DSC09676_zpsaa0616c8.jpg)

Next on the list is the clear guard kit for the saddlebags

(http://i151.photobucket.com/albums/s144/wachuko/Motorcycles/RK%20CVO/DSC09694_zpsa45e51d4.jpg)

And the HeadWinds brake caliper lights that match the tip of the exhaust (sadly, these lights are no longer available...very glad I took the off when I did the trade it)

(http://forums.rennlist.com/upload/dsc05504sm.jpg)

I have them with LEDs

(http://i151.photobucket.com/albums/s144/wachuko/RGC-CVO/DFFE66CE-C828-4E7B-B035-35B8B8CDE244_zpsufbntjpt.jpg)

Looking good!
Title: Re: What did you do to or on your CVO today?
Post by: cambo on August 31, 2014, 11:11:21 AM
Finally got to ride the bike (life has gotten a little too hectic as of late) to pull the trigger on a CVO RG Ultra or Limited. The trigger was not pulled.  :(

(https://farm4.staticflickr.com/3914/14901048567_df1ac57b09_c.jpg) (https://flic.kr/p/oGKLAt)

Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on August 31, 2014, 05:25:57 PM
Finally was able to install the garage door opener.  A little bit of a hassle, would not have been so bad if the instructions were more clear.  Lots of errors and omissions in the instructions, which they probably do on purpose.

Anyway, works great, certainly worth the effort.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on August 31, 2014, 05:27:06 PM
Nothing I was too busy riding it! 196.5 miles and in the garage just before the rain hit!  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on August 31, 2014, 06:00:02 PM
Nothing I was too busy riding it! 196.5 miles and in the garage just before the rain hit!  :2vrolijk_21:
That sounds just like my day today. Thank goodness we beat the rain, too much work to clean the bike after riding in the rain..
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on August 31, 2014, 06:00:42 PM
That sounds just like my day today. Thank goodness we beat the rain, too much work to clean the bike after riding in the rain..
No lie!
Title: Re: What did you do to or on your CVO today?
Post by: wachuko on August 31, 2014, 11:06:18 PM
Added another 100 miles to the new bike... rain and all.  Great for cooling down...

Also installed the fans tonight with the wiring.  Fully functional...

(http://i151.photobucket.com/albums/s144/wachuko/Motorcycles/RK%20CVO/DSC09696_zps0654a329.jpg)

Installed the caliper mounted lights.  Just the lights.  Need to finish the wiring some other day as we are going riding tomorrow.  :carrot:

(http://i151.photobucket.com/albums/s144/wachuko/Motorcycles/RK%20CVO/DSC09707_zps430a3186.jpg)

(http://i151.photobucket.com/albums/s144/wachuko/Motorcycles/RK%20CVO/DSC09705_zps18fc72ef.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: Bigfoot16 on September 06, 2014, 10:59:45 PM
Just got back from a 2100 mile ride, Dragon, Cherahola, Charleston, Myrtle Beach and back to Indiana.  Spent 7 hours cleaning the bike after hitting a couple of rain showers here and there.  :)
Title: Re: What did you do to or on your CVO today?
Post by: WestCoastRuss on September 06, 2014, 11:13:33 PM
Finally got to ride the bike (life has gotten a little too hectic as of late) to pull the trigger on a CVO RG Ultra or Limited. The trigger was not pulled.  :(

Not pulling that trigger Cam means you still have the ammo in your pocket!!   Glad you got a ride in.....
Title: Re: What did you do to or on your CVO today?
Post by: FL CVO on September 07, 2014, 07:40:49 AM
Rode out to the gun show and bought a new boom stick.
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on September 07, 2014, 04:42:11 PM
Removed the freakin reflectors from the lower legs upon my return from picking up my new CVO RK last night.

 Changed mirrors, adjusted shocks, removed and cored the mufflers, today. Did get to try the cored mufflers for about 10 miles. Still a little too quiet but I may get used to it. Wish it wasn't raining here so much the last couple days,

Regards,
Shrader
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on September 07, 2014, 05:00:12 PM
Removed the freakin reflectors from the lower legs upon my return from picking up my new CVO RK last night.

 Changed mirrors, adjusted shocks, removed and cored the mufflers, today. Did get to try the cored mufflers for about 10 miles. Still a little too quiet but I may get used to it. Wish it wasn't raining here so much the last couple days,

Regards,
Shrader
:worthless: :worthless:

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on September 07, 2014, 06:34:00 PM
Here's a teaser.
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on September 07, 2014, 06:49:41 PM
Here's a teaser.
Sweeeeeeeeeet!!!! :2vrolijk_21: Look likes Hub is pondering your choice. :D :D

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: Jock on September 07, 2014, 06:54:02 PM
Here's a teaser.

(http://www.cvoharley.com/smf/index.php?action=dlattach;topic=89705.0;attach=270436;image)

Nice scoot!  Hope to see it in the "Valley"!
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on September 07, 2014, 07:09:20 PM
(http://www.cvoharley.com/smf/index.php?action=dlattach;topic=89705.0;attach=270436;image)

Nice scoot!  Hope to see it in the "Valley"!

Very nice, if I were to ever sell my CVO Breakout, that is probably what I would buy.
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on September 07, 2014, 07:11:12 PM
(http://www.cvoharley.com/smf/index.php?action=dlattach;topic=89705.0;attach=270436;image)

Nice scoot!  Hope to see it in the "Valley"!

She's a gonna be there Jock. CAN'T WAIT.

Regards
Shrader
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on September 07, 2014, 07:12:01 PM
Sweeeeeeeeeet!!!! :2vrolijk_21: Look likes Hub is pondering your choice. :D :D

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:

Naw
I think Otis Farted!
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on September 07, 2014, 07:28:48 PM
Naw
I think Otis Farted!
  :oops: :ROFLOL: I should've enlarged the pic so I could have seen the tears in his eyes. :huepfenlol2: :huepfenlol2:

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on September 07, 2014, 07:47:22 PM
I think the picture was snapped about 0.1 seconds after the smell hit his nose. His hand is instinktively coming up to cover it while his brain is thinking "Did I step in dog chit or did Otis drop a SBD on me?"

Regards
Shrader


Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on September 08, 2014, 08:41:38 PM
Just got home from Wisconsin. 1300 miles and never got wet.
Title: Re: What did you do to or on your CVO today?
Post by: wachuko on September 09, 2014, 06:09:29 AM
Saddlebag guards installed

(http://i151.photobucket.com/albums/s144/wachuko/Motorcycles/RK%20CVO/9E8F90D5-A498-429B-9108-4C3F222AAE14_zps6iqxd6n2.jpg)

(http://i151.photobucket.com/albums/s144/wachuko/Motorcycles/RK%20CVO/BF82554A-056E-4326-9458-B46BD808E7E5_zpsogcecddl.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: D-N-D on September 09, 2014, 08:15:43 AM
Very Nice !!!
Title: Re: What did you do to or on your CVO today?
Post by: kiro on September 09, 2014, 08:50:59 AM
Installed a G. Anderson Tour-Pac relocator and ordered some caliper mount Motolights with ultra-bright LED bulbs…
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on September 09, 2014, 09:42:19 PM
Changed bolts on master cylinder clamps and derby cover then started applying hot toppers....
more hot toppers on order due Friday.

Regards
Shrader
Title: Re: What did you do to or on your CVO today?
Post by: 89Speedy on September 10, 2014, 02:41:48 AM
Like the title says, what did you do to or on your CVO today?
Rode the crap out of it!
Title: Re: What did you do to or on your CVO today?
Post by: queenie on September 10, 2014, 10:33:42 AM
Hubby installed my turn signal extension caps for my short little fingers!!! :mango: :orange: :apple:
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on September 10, 2014, 09:37:19 PM
Local dealer changed the front tire after the old one "cupped-out" with 8,500 miles.

What do you think of their balancing job?




 :inquisitive:   :thumbsdown:
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on September 10, 2014, 09:53:25 PM
Local dealer changed the front tire after the old one "cupped-out" with 8,500 miles.

What do you think of their balancing job?

Dyna beads is what my dealer uses. That's ugly!
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on September 11, 2014, 08:03:46 AM
You got the dyna beads in your Ruby, Jesse?  Have you had them in there for quite a while and what do you think?
Title: Re: What did you do to or on your CVO today?
Post by: D-N-D on September 11, 2014, 08:23:01 AM
What do you think of their balancing job?

They should have used Chrome I make them change them.
Title: Re: What did you do to or on your CVO today?
Post by: wachuko on September 11, 2014, 08:27:05 AM
What do you think of their balancing job?

They should have used Chrome I make them change them.

This ^
Title: Re: What did you do to or on your CVO today?
Post by: DCC on September 11, 2014, 10:46:53 AM
Dyna beads is what my dealer uses. That's ugly!

From Dunlop's website regarding balancing.
It is essential that tire/wheel assemblies be balanced before use and rebalanced each time the tire is removed or replaced. Unbalanced tire/wheel assemblies can vibrate at certain speeds, and tire wear will be greatly accelerated.
All Dunlop street tires should be installed with the balance dot at the valve. Wheels may be balanced with spoke nipple weights, lead wire or self-adhesive rim weights. Consult the motorcycle manufacturer for approved wheel weights.
Dunlop does not recommend the use of dry or liquid balancers/sealers and will not warrant tires into which these materials have been injected. Tire and wheel assembly balance must be checked with a balance stand or computer wheel balancer.
Title: Re: What did you do to or on your CVO today?
Post by: DCC on September 11, 2014, 11:15:44 AM
Local dealer changed the front tire after the old one "cupped-out" with 8,500 miles.

What do you think of their balancing job?

Should have used chrome weights. >:(
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on September 11, 2014, 12:33:32 PM
From Dunlop's website regarding balancing.
It is essential that tire/wheel assemblies be balanced before use and rebalanced each time the tire is removed or replaced. Unbalanced tire/wheel assemblies can vibrate at certain speeds, and tire wear will be greatly accelerated.
All Dunlop street tires should be installed with the balance dot at the valve. Wheels may be balanced with spoke nipple weights, lead wire or self-adhesive rim weights. Consult the motorcycle manufacturer for approved wheel weights.
Dunlop does not recommend the use of dry or liquid balancers/sealers and will not warrant tires into which these materials have been injected. Tire and wheel assembly balance must be checked with a balance stand or computer wheel balancer.
Then I'll buy a new tire if that time comes.  Too many ugly weights and too many falling off and damaging fenders.
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on September 11, 2014, 06:41:58 PM
Local dealer changed the front tire after the old one "cupped-out" with 8,500 miles.

What do you think of their balancing job?
i just went thru this bs, new tires chrome weights on my contrast wheels & the OE weights were left on the rim opposing the new ones (not happy) a lill bitching and they were happy to do over for me...kids!!
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on September 11, 2014, 10:06:14 PM
I've got an appointment at another dealer who's 30 minutes further from the house to do a re-balance and otherwise double check the work.  It's not as conveniently close to where I work as my former service center, but...   Well, I'll leave it at that.




I like that .... "my former" part, bikes cost us way to much to settle on shoddy workmanship from the dealers. You're lucky you have choices unlike some of us.  :(
Title: Re: What did you do to or on your CVO today?
Post by: Aussie on September 11, 2014, 11:25:07 PM
Personaly I would have taken the old weights off and cleaned the glue residue off myself. requested chrome weights be put on when balancing.
We have CVO's for a reason, we are just dam fussy and take pride in our bikes.  ;D
Title: Re: What did you do to or on your CVO today?
Post by: OBB on September 14, 2014, 06:54:18 AM
The rest of the story....

http://ridingtwoup.wordpress.com/2014/09/13/customer-experience-the-good-the-bad-and-the-ugly/
Interesting reading. I see you have a comment on it already from someone at your former dealer.
You're dead on about the customer service aspect of things. I use a different dealer than what I started out with a little over two years ago because of similar issues.
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on September 14, 2014, 08:39:25 AM
I was glad to see someone at the Dealership actually commented, hey that's a step in the right direction. As has been said I too have had less than pleasant visits to my local dealership. Unfortunately there aren't many options for visiting others.
Title: Re: What did you do to or on your CVO today?
Post by: kiro on September 14, 2014, 09:44:06 AM
Great blog article... I think sometimes dealerships work on so many bikes they forget how special your bike is to you as the owner - big mistake. My local dealer is close to home, next is well over an hour away so I hope things remain friendly.
Title: Re: What did you do to or on your CVO today?
Post by: cambo on September 16, 2014, 08:13:55 PM
Technically this past Sunday but...Visited Gettysbrug PA and made sure that we checked out a few covered bridges on the way back. :bananarock: :bananarock: :bananarock:

(https://farm6.staticflickr.com/5577/15053721509_7461e18158_c.jpg) (https://flic.kr/p/oWffWz)
Title: Re: What did you do to or on your CVO today?
Post by: kiro on September 16, 2014, 08:21:05 PM
Outstanding shot!
Title: Re: What did you do to or on your CVO today?
Post by: cambo on September 16, 2014, 08:41:43 PM
Outstanding shot!

Thanks Kiro!
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on September 17, 2014, 07:40:49 AM
Those chrome weights can sure come off like the plain ones,,,  I had my rear fender fixed recently,,,  I'm ready to try another route.  :-\
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on September 17, 2014, 09:48:39 AM
 :jack:
Those chrome weights can sure come off like the plain ones,,,  I had my rear fender fixed recently,,,  I'm ready to try another route.  :-\

Stuey my dealer switched to Dyna Beads. I thought both wheels lost their weights but turns out they switched and didn't mention it lol.
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on September 18, 2014, 12:45:48 AM
Jesse,, so I guess you are happy with the Dyna beads?  I'm gonna ask my dealer,,, I'll be ready for 2 new tires really soon.  Thanks ,
Title: Re: What did you do to or on your CVO today?
Post by: citruscvo on September 18, 2014, 01:16:11 AM
New seat !
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on September 18, 2014, 06:33:51 AM
Jesse,, so I guess you are happy with the Dyna beads?  I'm gonna ask my dealer,,, I'll be read for 2 new tires really soon.  Thanks ,

No problems Stu.
Title: Re: What did you do to or on your CVO today?
Post by: kiro on September 18, 2014, 08:45:07 AM
Purchased a pair of Motolight caliper mounted lights and had them installed by my dealer when the bike went in the shop. Included was Ultra Bright LED lamps, wiring harness for FL and braided cables. I view these as a safety asset for the ‘triangle of light’ system. Had one issue – the bolts sent were incorrectly threaded so there’s a black bolt in place until I can change them out. Motolight still offers forum members a discount and are an excellent firm.
Title: Re: What did you do to or on your CVO today?
Post by: TheHern on September 18, 2014, 08:55:00 AM
added plugs for the heated seats...starting to get chilly here at night in GA!
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on September 19, 2014, 08:14:48 AM
Rode from Maggie Valley GTG to Deals Gap, ate lunch, did the Dragon on new RK, then to Cherahola Skyway and back to MV. We passed a cop while coming back on 74 while doing 100. She must have been eager to get home caused she didn't turn around and give us coupons.

Regards
SHRADER
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on September 19, 2014, 03:37:49 PM
Well, the plan was to take off and ride to the mvgtg with my lovely wife but she had to go into work. I already had the day off so instead of taking the trip without her, just rode to k'ville hd on Clinton hwy while she toiled away. Walked in and guess who I ran into?  Deserthog (Simon) was on his way back to NM and in the shop getting his oil changed for the trip home. Saw him at the counter purchasing a shirt....would'a known him anywhere from the pics on our website.  We had a great visit (talked about an hour or so) and he was on his way.  I introduced him to the owners (DJ Brown and his father, Dile) and they discussed a possible future purchase... ;D
Really enjoyed getting to meet him after reading his posts and the pics from the site. Class act that Simon. Safe travels back home, brother.  The picture is after the service was completed and he's talking to the K'ville HD owner, DJ.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on September 19, 2014, 04:00:15 PM
Well, the plan was to take off and ride to the mvgtg with my lovely wife but she had to go into work. I already had the day off so instead of taking the trip without her, just rode to k'ville hd on Clinton hwy while she toiled away. Walked in and guess who I ran into?  Deserthog (Simon) was on his way back to NM and in the shop getting his oil changed for the trip home. Saw him at the counter purchasing a shirt....would'a known him anywhere from the pics on our website.  We had a great visit (talked about an hour or so) and he was on his way.  I introduced him to the owners (DJ Brown and his father, Dile) and they discussed a possible future purchase... ;D
Really enjoyed getting to meet him after reading his posts and the pics from the site. Class act that Simon. Safe travels back home, brother.  The picture is after the service was completed and he's talking to the K'ville HD owner, DJ.
That's awesome
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on September 19, 2014, 04:03:18 PM
Simon sure has a beautiful SERGU.  Love all the hand painted murals from pictures he's taken on trips.  The Lord be with you on your way home my friend...
Title: Re: What did you do to or on your CVO today?
Post by: Bigfoot16 on September 19, 2014, 04:19:20 PM
Well, the plan was to take off and ride to the mvgtg with my lovely wife but she had to go into work. I already had the day off so instead of taking the trip without her, just rode to k'ville hd on Clinton hwy while she toiled away. Walked in and guess who I ran into?  Deserthog (Simon) was on his way back to NM and in the shop getting his oil changed for the trip home. Saw him at the counter purchasing a shirt....would'a known him anywhere from the pics on our website.  We had a great visit (talked about an hour or so) and he was on his way.  I introduced him to the owners (DJ Brown and his father, Dile) and they discussed a possible future purchase... ;D
Really enjoyed getting to meet him after reading his posts and the pics from the site. Class act that Simon. Safe travels back home, brother.  The picture is after the service was completed and he's talking to the K'ville HD owner, DJ.

Very cool. I was just there last Saturday.
Title: Re: What did you do to or on your CVO today?
Post by: hawkeye4jw on September 20, 2014, 09:32:25 PM
 I added the light bar to the tour pack today.

Ride Safe
Jack
Title: Re: What did you do to or on your CVO today?
Post by: hawkeye4jw on September 20, 2014, 09:37:51 PM
Had Joe @xtreme paint it and tint the lens. Great job. Joe did a great job for a fair price and got it done quickly. Thanks Joe

Jack
Title: Re: What did you do to or on your CVO today?
Post by: hawkeye4jw on September 20, 2014, 09:39:24 PM
Last pic with the brakes on.

Jack
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on September 20, 2014, 09:45:06 PM
Had Joe @xtreme paint it and tint the lens. Great job. Joe did a great job for a fair price and got it done quickly. Thanks Joe

Jack

Love it. Joe painted mine too. I love having the LED light bar on there. I took off the chrome on the bottom and added the lights there too.

(http://i1244.photobucket.com/albums/gg579/jswerve1974/2014-08-31183922_zpseff67e5e.jpg) (http://s1244.photobucket.com/user/jswerve1974/media/2014-08-31183922_zpseff67e5e.jpg.html)
Title: Re: What did you do to or on your CVO today?
Post by: SMSgt B on September 20, 2014, 09:51:19 PM
Installed a George Anderson tourpak relocator plater ... pushed it back 2.5" so the wife can now lay down and sleep  :D

(http://i38.photobucket.com/albums/e137/smsgtb/2015%20CVO%20Roadglide/024_zps6c9c67d2.jpg)

(http://i38.photobucket.com/albums/e137/smsgtb/2015%20CVO%20Roadglide/025_zps3973fc78.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: hawkeye4jw on September 20, 2014, 10:22:14 PM
Love it. Joe painted mine too. I love having the LED light bar on there. I took off the chrome on the bottom and added the lights there too.

(http://i1244.photobucket.com/albums/gg579/jswerve1974/2014-08-31183922_zpseff67e5e.jpg) (http://s1244.photobucket.com/user/jswerve1974/media/2014-08-31183922_zpseff67e5e.jpg.html)

I have the side lights also. Just not sure if I am going to put them on now. I am waiting for the 2 sided tape to remount the screaming eagle emblem.  After seeing your light bar I decided I wanted one.

Ride Safe
 Jack

Ride Safe
Jack
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on September 20, 2014, 10:24:30 PM
I have the side lights also. Just not sure if I am going to put them on now. I am waiting for the 2 sided tape to remount the screaming eagle emblem.  After seeing your light bar I decided I wanted one.

Ride Safe
 Jack

Ride Safe
Jack

Sweet. Looks great brother.

Ride safe,

Jesse
Title: Re: What did you do to or on your CVO today?
Post by: FLHTCUSE7 on September 20, 2014, 11:32:42 PM
So at the moment I don't ride mine. The BMW and the Guzzi are much more fun to ride for me so the HD sits in my garage with stuff pilled on it. I only rode it 5K miles so far this year. I might add another 2K miles this summer but 7K miles is just pussy riding for any bike. (Although I be North of 15K in total this summer in total)

So I am either going to sell the CVO Limited or build a glass bar around it.

What is a fair price to list it for?  $29K seem realistic to be?  Going on eBay after new year.
Title: Re: What did you do to or on your CVO today?
Post by: Furmon on September 21, 2014, 11:39:42 AM
I added a matching tour pack
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on September 21, 2014, 12:37:38 PM
I added a matching tour pack

Looking good. I had the matching King for over a year but always felt it hurt visibility and was lacking something with all that space in the back. Are you going to add the LED wrap around light bar?
Title: Re: What did you do to or on your CVO today?
Post by: hawkeye4jw on September 21, 2014, 01:17:20 PM
I added a matching tour pack

Looking good. That is probably my favorite  CVO Streetglide colors.

Ride safe
 Jack
Title: Re: What did you do to or on your CVO today?
Post by: charles05663 on September 21, 2014, 07:11:43 PM
Looking good. That is probably my favorite  CVO Streetglide colors.

Ride safe
 Jack

Jack,

Where did you get your folding seat?  I have a backrest I would like to add one too.

Charles
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on September 21, 2014, 09:27:30 PM
Got caught in a small rain shower on the way home from the get together in Maggie Valley.  Still managed 510 miles. Only @ 450 miles left to cover tomorrow. Oh and had a front wheel weight come off and somehow hit my right boot sole as I was going along. Had to stop and check the bike over because I had no idea what the heck hit my boot.
Title: Re: What did you do to or on your CVO today?
Post by: Supershooter on September 21, 2014, 10:12:34 PM
Rode mine home from a weekend at South Dakota State, where I watched Jackrabbit victory on the football field Saturday night. The weather was great for an early fall ride!
Supershooter
Title: Re: What did you do to or on your CVO today?
Post by: wachuko on September 22, 2014, 12:27:29 AM
Installed FullSac 2" cores and the metal sleeves...

(http://i151.photobucket.com/albums/s144/wachuko/Motorcycles/RK%20CVO/DB26AA37-ED92-4BBD-91CE-50014B2E1F2F_zpsccptabbc.jpg)

(http://i151.photobucket.com/albums/s144/wachuko/Motorcycles/RK%20CVO/DSC09766_zps2f704ea9.jpg)

Also replaced the pins in the saddlebags for bolts.

(http://i151.photobucket.com/albums/s144/wachuko/Motorcycles/RK%20CVO/DSC09776_zpsf511f71f.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: hawkeye4jw on September 22, 2014, 04:25:59 AM
i
Jack,

Where did you get your folding seat?  I have a backrest I would like to add one too.

Charles

The seat in the picture is a Le Pera and has it's own backrest. When I switch to the Hammock seat I have a Mustang backrest that mounts to the bike that does the same thing. They both make it allot easier for me to get on and off.

 Ride Safe
 Jack
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on September 22, 2014, 07:11:57 AM
Rode mine a little bit.  Then I washed it real good.  I have to fly out to work for three weeks so the bike had to be ready to leave for Daytona the day I get home.
Title: Re: What did you do to or on your CVO today?
Post by: charles05663 on September 22, 2014, 09:02:00 AM
i
The seat in the picture is a Le Pera and has it's own backrest. When I switch to the Hammock seat I have a Mustang backrest that mounts to the bike that does the same thing. They both make it allot easier for me to get on and off.

 Ride Safe
 Jack

I wonder when Le Pera added the backrest.  When I demoed their seat they did not have one so I went with C&C.  I like the Le Pera better because it was firmer.  The C&C is too soft.

 :oops: :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: hawkeye4jw on September 22, 2014, 09:41:31 AM
I wonder when Le Pera added the backrest.  When I demoed their seat they did not have one so I went with C&C.  I like the Le Pera better because it was firmer.  The C&C is too soft.

 :oops: :nixweiss:

 Which C&C seat do you have?

Jack
Title: Re: What did you do to or on your CVO today?
Post by: Bav on September 22, 2014, 10:54:26 AM
Fitted quiet baffles to my V&H twin slash ovals on my 14 SERK. The Dresser Duals had made it a bit too loud in my opinion. It now sounds more mellow and doesn't have the very loud "crack" on hard acceleration. Still loud enough for my liking. Also remapped the FP3 for the new baffles and took the opportunity to change the throttle responsiveness to "moderate" and to increase the idle speed by 20 rpm. Used the Autotune feature for the first time and she is running really sweet.


Sent from my iPad using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: jpdchicago on September 22, 2014, 01:32:05 PM
Installed Wild Ones 10" mini apes and LEDmirrors
Title: Re: What did you do to or on your CVO today?
Post by: cmashark on September 22, 2014, 04:59:08 PM
Road to work and spent half the day staring at it from the smoke pit while waiting on an stubborn aircraft to do what I needed it to do.
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on September 23, 2014, 11:43:37 AM
Placed an order for Fullsac 2 inch cores, screens and TTS Mastertune for Orange Crush.

Should be installing the parts this weekend if not sooner.

Regards
Shrader
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on September 23, 2014, 08:51:13 PM
Cleaned 2751 miles worth of crud off it  :2vrolijk_21:
I spent about 1.5 hours cleaning it up.

Granted it's not Chip or Judy clean  ::) but it's a LOT cleaner than it was when I got home from the Maggie Valley GTG Yesterday.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on September 23, 2014, 09:11:11 PM
Cleaned 2751 miles worth of crud off it  :2vrolijk_21:
I spent about 1.5 hours cleaning it up.

Granted it's not Chip or Judy clean  ::) but it's a LOT cleaner than it was when I got home from the Maggie Valley GTG Yesterday.
^^ What he said. Spent a few hours on mine after work.
Title: Re: What did you do to or on your CVO today?
Post by: Jock on September 23, 2014, 09:15:13 PM
Cleaned 2751 miles worth of crud off it  :2vrolijk_21:
I spent about 1.5 hours cleaning it up.

Granted it's not Chip or Judy clean  ::) but it's a LOT cleaner than it was when I got home from the Maggie Valley GTG Yesterday.

No my friend!  It must be DICKW clean!

 :2vrolijk_21:

 :)
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on September 23, 2014, 09:29:23 PM
No my friend!  It must be DICKW clean!

 :2vrolijk_21:

 :)

In that case -- not even close  :-[
Title: Re: What did you do to or on your CVO today?
Post by: DICKW on September 24, 2014, 07:13:03 AM
In that case -- not even close  :-[

 :'( It'll take me a day to clean mine, then it's off to the dealer for a service.
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on September 24, 2014, 07:35:58 AM
not today but took off yesterday afternoon and changed all the fluids on Ginger....including brake and clutch fluid.  Never changed the clutch fluid before so a bit nervous but all things worked similar to changing the brake fluid.  A big thanks to grc (Jerry) for the advice and great short-cut/time savings ideas.  Much appreciated for the help, Jerry.  The velcro idea made it so much simpler and was one of those "why didn't I think of that" ideas.
She's been flushed, washed, waxed and is ready for another day on the road....
Title: Re: What did you do to or on your CVO today?
Post by: owl893 on September 24, 2014, 11:23:55 AM
  A big thanks to grc (Jerry) for the advice and great short-cut/time savings ideas.  Much appreciated for the help, Jerry.  The velcro idea made it so much simpler and was one of those "why didn't I think of that" ideas.

Missed that thread, Do you have the link? I can always use some helpful tips for GRC.

OWL 
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on September 24, 2014, 12:10:29 PM
Missed that thread, Do you have the link? I can always use some helpful tips for GRC.
OWL

I'm sure he's commented on this kind of thing in the past but no thread reference in my post this go around.  I just PM'ed him asking for some advice on something I hadn't attempted before and he responded very quickly with, as you would expect from Jerry, exactly what I was looking for in his answer.  That feller is a world of knowledge.....
Title: Re: What did you do to or on your CVO today?
Post by: denis on September 24, 2014, 03:13:17 PM
took my cvo in for clutch master recall today done in 30min  :orange:
Title: Re: What did you do to or on your CVO today?
Post by: Bav on September 24, 2014, 05:23:45 PM
Thanks Denis. I had missed that recall. Takes them a long time to notify owners directly. Just checked the H-D website and it showed up as an open recall.


Sent from my iPad using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on September 25, 2014, 07:47:12 PM
Changed the fluids. Tomorrow it's going to the dealer for installation of a new power ignition lock - covered by the ESP - good thing since the lock is something like $500.00 plus the labor.
Title: Re: What did you do to or on your CVO today?
Post by: Royalroadie on September 25, 2014, 07:55:03 PM
I add some Wards Werks Cooling Fans.  Nice fit and finish.   I will let you know how they work out. 
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on September 25, 2014, 08:01:37 PM
I add some Wards Werks Cooling Fans.  Nice fit and finish.   I will let you know how they work out.

I've had mine for a few seasons now and I'm pleased with them  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on September 25, 2014, 10:59:56 PM
I dropped off my sesg3 at my favorite dealer,, New tires front and rear going on in the morning,,, :)
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on September 28, 2014, 09:26:53 PM
Miss Susan, Hubbard and I rode the Back of the Dragon today to Marion, had lunch, then rode the big road back home. I hadn't ridden Rt 16 in several years and wanted to compare it to the Tail of the Dragon since we rode it last week. Back of the Dragon has a lot more elevation change that's for sure, and tighter curves.

Put the RK up on the lift in preparation for exhaust changes later this week. Then gave the SEEG a little love and rode her for the first time since buying the RK.

Regards
SHRADER
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on September 28, 2014, 09:54:04 PM
I dropped off my sesg3 at my favorite dealer,, New tires front and rear going on in the morning,,, :)


 :2vrolijk_21:  :2vrolijk_21:  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Bollocks on September 29, 2014, 03:27:42 AM
Put on a new Mustang seat and went for a spin to test it.... visited 5 dealerships on the Open House in Belgium, 460km (+-280miles), saddle is tested and given a big OK!

Title: Re: What did you do to or on your CVO today?
Post by: willyB on September 29, 2014, 12:19:43 PM
Added a chopped tour pak
Title: Re: What did you do to or on your CVO today?
Post by: DICKW on September 29, 2014, 12:54:12 PM
Added a chopped tour pak
That's a good lookin scoot!!!!
Title: Re: What did you do to or on your CVO today?
Post by: jpdchicago on September 29, 2014, 02:06:51 PM
Went on a 250 mile ride, finished adjusting my new handlebars. They now fit perfectly!
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on September 29, 2014, 05:18:46 PM
Added a chopped tour pak
I like the looks of the chopped tour pak!
Title: Re: What did you do to or on your CVO today?
Post by: East Coast on September 29, 2014, 05:20:24 PM
Sold it and left a deposit on a new one!  :drink:
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on September 29, 2014, 05:27:09 PM
Sold it and left a deposit on a new one!  :drink:

Waiting to picking up a new bike after putting a down payment is always a long wait, what are you buying?
Title: Re: What did you do to or on your CVO today?
Post by: The Bolvine Gigolo! on September 30, 2014, 04:57:59 AM
Well sense I joined this site,  to date I've owned 8 CVO s.'put tons of new goodies and lost my behind. So told Soozie we're not going to make any changes,  just fulsac. Pipes and tuner. The. Bike's run great and I've saved a ton of money.
Title: Re: What did you do to or on your CVO today?
Post by: porthole on September 30, 2014, 08:59:22 AM
we're not going to make any changes,  just fulsac. Pipes and tuner.


 :2vrolijk_08: :2vrolijk_08: :vrolijk_6: :vrolijk_6: :stars: :stars: :juggle2: :juggle2: :huepfenpinkie: :huepfenpinkie: :2vrolijk_02: :2vrolijk_02: :vrolijk_19: :vrolijk_19: :2vrolijk_08: :2vrolijk_08:

 :2vrolijk_09: :vrolijk_11: :2vrolijk_09:
Title: Re: What did you do to or on your CVO today?
Post by: porthole on September 30, 2014, 09:01:21 AM
What did you do to or on your CVO today?

After 9 1/2 years of riding with the highway pegs at the top of the engine guard, I moved them down to a just off the floor board position.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on September 30, 2014, 09:18:42 AM
What did you do to or on your CVO today?

After 9 1/2 years of riding with the highway pegs at the top of the engine guard, I moved them down to a just off the floor board position.

I ride with mine like this. Balls of my feet on highway pegs and heels on the floorboards. Absolutely love it.
Title: Re: What did you do to or on your CVO today?
Post by: Bav on September 30, 2014, 12:09:09 PM
So do I. Very comfy.


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Billy on September 30, 2014, 04:23:34 PM
New front and rear tires 16,000 miles with lots of tread left but the rear howls from cupping. and will relocate front turn signals  Billy
Title: Re: What did you do to or on your CVO today?
Post by: CVOgaree on September 30, 2014, 05:50:16 PM
After attending to my 91 year old Mom, I go for my "Coffee & Cowchit Ride" out in the boonies. No traffic, lots of wildlife, & best of all.....the smell of the Cows, Horses & Orange groves. Weather permitting of course.

Used Autosol all over the exposed chrome while the bike is still somewhat apart. Lots of calcified water spots in those hard to reach arias. Now all the nooks and crannies are glowing like brand new.
Title: Re: What did you do to or on your CVO today?
Post by: CannonBall on October 01, 2014, 02:32:41 AM
I took the day off and rode 425 miles ;)
Title: Re: What did you do to or on your CVO today?
Post by: WTF Chuck on October 01, 2014, 02:55:52 PM
Installed my Custom Billet Works Screamin' Eagle emblem.
Not a very good picture.
Title: Re: What did you do to or on your CVO today?
Post by: East Coast on October 01, 2014, 03:00:53 PM
Waiting to picking up a new bike after putting a down payment is always a long wait, what are you buying?

Left a deposit on Hard Kandy Mercury CVO SG. Not sure when it's coming, I was told it might be after the new year if the dealer cant trade for one. The first round of CVO SG's in my area were sold before they hit the floor. Found a dealer selling at MSRP so I'll wait it out.
Title: Re: What did you do to or on your CVO today?
Post by: dooinit2u on October 01, 2014, 03:21:12 PM
Mounted newly pained TP, Washed and passed a coat of Royal Blue Wax...

(http://i681.photobucket.com/albums/vv171/dooinit2u/2009%20SERG/DSCN1964.jpg) (http://s681.photobucket.com/user/dooinit2u/media/2009%20SERG/DSCN1964.jpg.html)
Title: Re: What did you do to or on your CVO today?
Post by: CannonBall on October 01, 2014, 05:37:59 PM
Mounted newly pained TP, Washed and passed a coat of Royal Blue Wax...

(http://i681.photobucket.com/albums/vv171/dooinit2u/2009%20SERG/DSCN1964.jpg) (http://s681.photobucket.com/user/dooinit2u/media/2009%20SERG/DSCN1964.jpg.html)

That is the sexiest RG I have ever seen!!
Title: Re: What did you do to or on your CVO today?
Post by: dooinit2u on October 01, 2014, 10:27:15 PM
That is the sexiest RG I have ever seen!!

Thanks alot Cannonball. It's a work in progress, and it rides awesome. The most comfortable one I have.
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on October 01, 2014, 10:38:12 PM
Received my TTS,2 inch Fullsac Cores, screens and installed them all this evening. Had an issue with the cd drive on my laptop but Steve Cole worked with me over the phone to download all necessary stuff from the TTS website. Thanks Steve..

Once I got that fixed I installed the cores in some 2012 mufflers Otis had and then installed a decatted head pipe, mufflers and Fullsac map.

Bike is noticeably louder and seems to spool up faster. One other beneficial side effect is that a vibration I had around 2k rpm is significantly reduced. The factory exhaust must have been in a bind or something, transferring vibration to the bike. Anyway I'm especially happy with the outcome!!!

Regards
Shrader
Title: Re: What did you do to or on your CVO today?
Post by: porthole on October 02, 2014, 11:56:52 AM
Tourpak compliments it well Paul, especially with the colors reversed.  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Bigfoot16 on October 02, 2014, 04:45:18 PM
Rode up to my Dads house. Installed a new freedom shield on his trike. He saw mine and said he wanted to get one someday. I bought one and tried to surprise him with it.   He's still cool at 75 years old and loves his new windshield.   
Title: Re: What did you do to or on your CVO today?
Post by: hawkeye4jw on October 02, 2014, 06:50:07 PM
Rode up to my Dads house. Installed a new freedom shield on his trike. He saw mine and said he wanted to get one someday. I bought one and tried to surprise him with it.   He's still cool at 75 years old and loves his new windshield.

Now that is one of the coolest things I have heard done on their CVO. Hope I am still able to ride with my son when I am 75. Heck I hope he still likes then. LOL

Ride safe
Jack
Title: Re: What did you do to or on your CVO today?
Post by: Bigfoot16 on October 02, 2014, 07:02:26 PM
Now that is one of the coolest things I have heard done on their CVO. Hope I am still able to ride with my son when I am 75. Heck I hope he still likes then. LOL

Ride safe
Jack

Thanks fellow Hoosier
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on October 02, 2014, 08:30:56 PM
Put a new cover on my Kury Power Cell x pipe.  I like it.
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on October 02, 2014, 08:32:23 PM
This is the one that came with it. It the new one up above really cleans up the look.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on October 02, 2014, 09:15:38 PM
This is the one that came with it. It the new one up above really cleans up the look.

STu good move that thing was hideous!
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on October 02, 2014, 09:20:13 PM
I knew they were going to offer something new.  Thanks  Jesse.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on October 02, 2014, 09:51:11 PM
I knew they were going to offer something new.  Thanks  Jesse.
That's Purdy
Title: Re: What did you do to or on your CVO today?
Post by: Digital on October 02, 2014, 10:01:35 PM
I ride with mine like this. Balls of my feet on highway pegs and heels on the floorboards. Absolutely love it.

I just moved my highway pegs down like you suggested.   Love it.  I finally found the perfect setup.  Thanks. 
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on October 04, 2014, 06:20:37 PM
Took the bike to Docs to complete the recall on the clutch.
Title: Re: What did you do to or on your CVO today?
Post by: FL CVO on October 04, 2014, 06:30:11 PM
Enjoyed the great riding weather at Thunder Beach. 
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on October 05, 2014, 09:49:11 AM
I just moved my highway pegs down like you suggested.   Love it.  I finally found the perfect setup.  Thanks.

Only way to ride! Glad I could help!

What did I do to my CVO today? Nothing! It's too damn cold out!
Title: Re: What did you do to or on your CVO today?
Post by: RayG on October 05, 2014, 10:44:49 AM
That is a nice improvement.  I'm thinking of installing the same exhaust system on my S&S 124".  The big concern I have is that it is pretty low,  I already went to the 13" shocks for more shock travel but that adds minimal cornering clearance.  Have you scraped the pipes or do you think it will be a problem if it is ridden hard in the corners?  When I talked with Harry from Kury at bike week he checked my bike and told me I was almost through the exhaust I have and recommended the True Dual set up and told me that it was just slightly off on the performance.  I talked to Steve @ GMR and John Sachs and both disagreed & told me to stay away from the True Duals and put what you have on and cool it in the corners.  I like the sound & the performance your set up delivers but I don't want to create another problem.  I drive two up about 30% of the time.  I would really appreciate your thoughts on any clearance issues ?       
Title: Re: What did you do to or on your CVO today?
Post by: cambo on October 05, 2014, 12:45:55 PM
Went to Clifton Bikes and Breakfast, held on the first Sunday of every month. One more left for this year and then it's time to face reality: the riding season is coming to an end. Ran across this bike, which was make to look like a buffalo, complete with the fur and this amazing s&s Shovelhead replica engine.

(https://farm4.staticflickr.com/3930/15262045970_cff35a1080_b.jpg) (https://flic.kr/p/pfDYxC)

Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on October 06, 2014, 06:40:23 AM
Ray,, I lreally like the power cell. I have learned to be a little less aggressive in the corners.  Where I live it's not a biggie.  Mostly flat here. I went with John Sachs suggestion.  He likes this combination and it really works well. Every once in a while I might hear something  during a hard corner.  Stuart.
Title: Re: What did you do to or on your CVO today?
Post by: hawkeye4jw on October 06, 2014, 06:21:53 PM
Had to clean mine with a rinseless car wash Saturday for a ride Sunday because it was rainy all day. Rode to Starved Rock with a small group Sunday for lunch. Was a little cold and had a few light showers but still got in 225 miles.

 Ride safe
Jack
Title: What did you do to or on your CVO today?
Post by: Bav on October 07, 2014, 11:45:18 AM
Gave her a quick wash after riding in the rain on Saturday at Ride to the Wall. Gotta love that Tribal Orange in the late afternoon October sunshine

(http://tapatalk.imageshack.com/v2/14/10/07/64a90a3caf5659252fa0ed60dea91812.jpg)

(http://tapatalk.imageshack.com/v2/14/10/07/0d268223e1a0840435fe7b5b7ef3befd.jpg)


Sent from my iPad using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: wachuko on October 09, 2014, 10:12:15 AM
Got back from work related travel... stared at the bikes in the garage... can't wait to take it out again... :orange:
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on October 10, 2014, 10:19:13 AM
Installed a lower belt guard to brighten up a dark spot on the CVO RK
Title: Re: What did you do to or on your CVO today?
Post by: WTF Chuck on October 10, 2014, 10:58:08 AM
Polished wheels with a Mothers polishing ball worked well no cut up hands and much less time. Tested and worked on a new to me used Pit bull lift think i need a new jack.
Title: Re: What did you do to or on your CVO today?
Post by: Bav on October 10, 2014, 03:24:28 PM
Got the clutch recall done. Any guesses on the next recall? Compensator?


Sent from my iPad using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: WJS on October 10, 2014, 04:37:14 PM
Got caught in the rain for about 10 miles. Then ordered a Fullsak exhaust.
Title: Re: What did you do to or on your CVO today?
Post by: AMEDD_SFC on October 10, 2014, 05:47:55 PM
Installed a lower belt guard to brighten up a dark spot on the CVO RK

Need this, I do.

Got me some eyebrows, though until they get the belt guard in.
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on October 10, 2014, 06:21:44 PM
Well, today was a great day. Rode down to see my pop yesterday in Summerville and to Low country HD today with him on the back. It's been almost 35 years since we rode together on the same motorcycle and I was the passenger then. My how things change. Great day.
We met up with mikeytee (Mike) at the shop, had a great lunch and visit and got to see where the "stuff" is made at his house. All in all a great visit, ride and day. We took away a bit of desert courtesy of Mike.
This is such a great site with some absolutely wonder folks on it. Thanks Mike for making the day with my pop that much more special.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on October 10, 2014, 06:35:32 PM
Well, today was a great day. Rode down to see my pop yesterday in Summerville and to Low country HD today with him on the back. It's been almost 35 years since we rode together on the same motorcycle and I was the passenger then. My how things change. Great day.
We met up with mikeytee (Mike) at the shop, had a great lunch and visit and got to see where the "stuff" is made at his house. All in all a great visit, ride and day. We took away a bit of desert courtesy of Mike.
This is such a great site with some absolutely wonder folks on it. Thanks Mike for making the day with my pop that much more special.
]

Sounds fun. High of 54 today. Left the bike in the garage where it has been for about 10 days. Supposed to be upper 60's mid week. May be the last crusade  :nixweiss:    :(
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on October 10, 2014, 06:50:13 PM
Couple pics from the day

Dang it all. I can't post pics from tapatalk. Beyond my expertise I guess. Oh well, I'll post em when I get back to a computer
Title: Re: What did you do to or on your CVO today?
Post by: longlast on October 10, 2014, 07:01:57 PM
Couple pics from the day

Dang it all. I can't post pics from tapatalk. Beyond my expertise I guess. Oh well, I'll post em when I get back to a computer

I'm sure you'll sort it in time Howard ;D
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on October 10, 2014, 07:07:41 PM
Thanks for the vote of confidence there Pete :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: longlast on October 10, 2014, 07:16:13 PM
I look forward to seeing the pics
Title: Re: What did you do to or on your CVO today?
Post by: YELLOWBIRD on October 11, 2014, 09:23:39 AM
My better half and I are hanging out at the "1st" Annual Colonial Beach Bike Rally.

Really cool little town, even better cool local old & new friends!


YB
Title: Re: What did you do to or on your CVO today?
Post by: RoadMonkey on October 12, 2014, 02:48:41 PM
Touring seat and windshield on..ready for trip to Florida / Biketoberfest!
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on October 12, 2014, 03:16:04 PM
Put the bike on a battery tender, looks like I will not be riding for another couple weeks due to travel and rain.
Title: Re: What did you do to or on your CVO today?
Post by: cambo on October 12, 2014, 04:10:45 PM
Great day for a ride. Temp in the 60's so I rode over to the nearest HD dealership in MD to see if there are any good deals on a Limited or RG. $3600 over MSRP! Oh well, I can wait...

Saw this beautiful green limited MSRP $29k. Normally not the color for me, but...

(https://farm3.staticflickr.com/2946/15495196356_00da035dde_b.jpg) (https://flic.kr/p/pBfW2S)

Cam
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on October 12, 2014, 05:52:36 PM
Spent the day riding with some friends in our HOG chapter through the Mississippi Delta ...


Cotton is ready for the picking



Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on October 12, 2014, 05:54:24 PM
Ride to eat.....Eat to ride!


Good eats if your ever in Greenwood MS


Homemade chocolate pie will put a hurt on ya!

Title: Re: What did you do to or on your CVO today?
Post by: OBB on October 12, 2014, 06:24:38 PM
Ride to eat.....Eat to ride!


Good eats if your ever in Greenwood MS


Homemade chocolate pie will put a hurt on ya!


I never met a chocolate pie that I couldn't tame.  ;D
Title: Re: What did you do to or on your CVO today?
Post by: OBB on October 12, 2014, 06:26:46 PM
Started putting it back to stock as much as I can before the trade in. Mirrors, extended heel shifter, shift linkage, driving lights removed, BAL, windshield and Mean Mug bezel swapped out. Still need to do the bags and rear fascia and my accent lighting.
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on October 13, 2014, 07:24:35 AM
Couple pics from the day

Dang it all. I can't post pics from tapatalk. Beyond my expertise I guess. Oh well, I'll post em when I get back to a computer

Never did get tapatalk to post any pics so here are a few from this past Friday in Summerville, SC.  The first one is of a man that needs no introduction to our group.  Met up with Mike at Low Country HD.
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on October 13, 2014, 07:26:18 AM
The three stooges.....Mike, my pop and yours truely

Taken just outside of Mike's special place....
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on October 13, 2014, 07:31:51 AM
And what's in Mike's special place you ask?  Well, just a small sample of what's there.

Really had a great time Friday.  Should'a stayed in SC as it was a beautiful day coming home on Saturday until I hit the NC state line.  Rained the rest of the way home.  Still, 900 miles in three days, great visit with my pop and with Mike on Friday and hey, a day on the bike in any weather is better than sitting at a desk at work.....
Title: Re: What did you do to or on your CVO today?
Post by: MIKEYTEE on October 13, 2014, 11:44:38 AM
Howard,
It was great meeting you and your Dad. I enjoyed our visit and look forward to the next one. I am fighting a cold now and haven't felt like doing anything except sit on my a$$ or sleep.
Mike
 :drink:






 
Title: Re: What did you do to or on your CVO today?
Post by: finn on October 13, 2014, 03:35:52 PM
finished install of universal lock kit for flstse leather bags. went well
Title: Re: What did you do to or on your CVO today?
Post by: HarleyJeffOregon on October 14, 2014, 09:44:38 AM
Rode 80 miles after work and watched the odometer turn 65,000 on my 2010. ;D
Title: Re: What did you do to or on your CVO today?
Post by: acevtwin on October 15, 2014, 09:19:31 AM
Cleaned it, filled the tank, plugged in the battery tender, put the cover on it and said goodbye until Daytona Bike week in March. A sad day.
Title: Re: What did you do to or on your CVO today?
Post by: willyB on October 15, 2014, 10:03:04 AM
On Tuesday night I changed oil, filter and relocated my new color matched chopped tour pak back 3/4". My 104 lb. wife needed more room. :nixweiss:

Riding tomorrow to check out how the newly repaired new compensator works out on a long ride. Wish me luck!
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on October 15, 2014, 02:12:35 PM
Cleaned it, filled the tank, plugged in the battery tender, put the cover on it and said goodbye until Daytona Bike week in March. A sad day.

Sorry to hear it is that time for you.  I hope I'm not changing the oil and covering for the winter anytime soon.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on October 15, 2014, 09:02:46 PM
The fall colors have peaked and it was a perfect fall day, upper 60's, lot's of sunshine, and a light breeze. Saddled up with my wife and swung by my uncle's. Rode down to Ogden to check out this years #1 ranked pork tenderloin in the state. 100 miles round trip. Took the back roads nothing but orange, yellow, and reds. Beautiful!

Here is the tenderloin!

(http://i1244.photobucket.com/albums/gg579/jswerve1974/Lucky1_zps88950a8b.jpg) (http://s1244.photobucket.com/user/jswerve1974/media/Lucky1_zps88950a8b.jpg.html)

(http://i1244.photobucket.com/albums/gg579/jswerve1974/Lucky2_zps0c0f7657.jpg) (http://s1244.photobucket.com/user/jswerve1974/media/Lucky2_zps0c0f7657.jpg.html)
Title: Re: What did you do to or on your CVO today?
Post by: Supershooter on October 15, 2014, 10:43:10 PM
Jesse, what's the name of the bar?
Supershooter
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on October 15, 2014, 10:59:09 PM
Jesse, what's the name of the bar?
Supershooter
The Lucky Pig
Title: Re: What did you do to or on your CVO today?
Post by: willyB on October 16, 2014, 07:29:45 PM
Took the day off and rode 201.3 miles by myself (wife hurt her shoulder). Perfect Weather.
Title: Re: What did you do to or on your CVO today?
Post by: 08glide on October 16, 2014, 08:28:47 PM
did she hurt her shoulder cause your scooter is standing on it's nose     ;D.   just asking  lol!
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on October 16, 2014, 08:55:22 PM
did she hurt her shoulder cause your scooter is standing on it's nose     ;D.   just asking  lol!

It's just a really steep hill..
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on October 16, 2014, 11:39:13 PM
The fall colors have peaked and it was a perfect fall day, upper 60's, lot's of sunshine, and a light breeze. Saddled up with my wife and swung by my uncle's. Rode down to Ogden to check out this years #1 ranked pork tenderloin in the state. 100 miles round trip. Took the back roads nothing but orange, yellow, and reds. Beautiful!

Here is the tenderloin!

(http://i1244.photobucket.com/albums/gg579/jswerve1974/Lucky1_zps88950a8b.jpg) (http://s1244.photobucket.com/user/jswerve1974/media/Lucky1_zps88950a8b.jpg.html)

(http://i1244.photobucket.com/albums/gg579/jswerve1974/Lucky2_zps0c0f7657.jpg) (http://s1244.photobucket.com/user/jswerve1974/media/Lucky2_zps0c0f7657.jpg.html)
That looks amazing!! Bikes are nice also
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on October 16, 2014, 11:41:09 PM
That looks amazing!! Bikes are nice also
Thanks. I'm trying to get my CVO up to snuff vs my uncle's SGS. Hehe.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on October 17, 2014, 05:38:56 AM
Thanks. I'm trying to get my CVO up to snuff vs my uncle's SGS. Hehe.
If that's your uncle in the pix, he looks like a real character. You need to bring him along to MV one of these years.  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on October 17, 2014, 05:56:56 AM
If that's your uncle in the pix, he looks like a real character. You need to bring him along to MV one of these years.  :2vrolijk_21:
Mike it is and he is a great dude. He's going to Sturgis with us next year for sure. I'm waiting to hear about the western g2g location and date?
Title: Re: What did you do to or on your CVO today?
Post by: willyB on October 17, 2014, 09:06:41 AM
It's just a really steep hill..
it is pretty hilly out our way. But the problem is when I post a picture from my IPad.

Any ideas?
Title: Re: What did you do to or on your CVO today?
Post by: 08glide on October 17, 2014, 12:59:56 PM
yeah! I'm not very good at it at all. suggestion :  rotate device or stand on head. in your case maybe one arm. :) haha
Title: Re: What did you do to or on your CVO today?
Post by: LN Nation on October 17, 2014, 02:22:02 PM
Installed Kuryakyn 5005 driving lights and turn signals on my FLHRSE5
Title: Re: What did you do to or on your CVO today?
Post by: Bromebe on October 17, 2014, 02:29:03 PM
well I didn't have no foot long chicken fried steak with extra cream gravy

but finally got my Kuryakyn forward controls installed along with a damn good price on a Kuryakyn air cleaner!
now if I can only get the new Bassani exhaust install!

thinking it might be Cracker Barrel tonight for chicken fried steak and a order of Blue berry pancakes!  :confused5:

Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on October 17, 2014, 02:31:30 PM
That's not chicken it's a pork loin. This is prime Iowa farmland ;)
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on October 17, 2014, 02:41:16 PM
That's not chicken it's a pork loin. This is prime Iowa farmland ;)

Kill it out back, cook it inside....can't get much fresher than that, Jesse.

Rode mine to work today after 6 straight days of rain.  Changed out my K&N back to the factory AF.  Took my lunch and rode over to K'ville HD West to visit my good friend at the parts counter.  Could not ask for a better day today weather wise.

Also sat on one of the new Limited low models.  Really liked everything about it EXCEPT the seat.  Felt like I was sitting in a hole and not very comfortable for the male parts.  Did like the new thinner/less wide primary cover....not too shabby and it's a retrofit back through '09.  That baby is slammed...shorter than my SESG (we measured).  Should be a great seller (if you change out that seat)
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on October 17, 2014, 02:48:06 PM
Kill it out back, cook it inside....can't get much fresher than that, Jesse.

Rode mine to work today after 6 straight days of rain.  Changed out my K&N back to the factory AF.  Took my lunch and rode over to K'ville HD West to visit my good friend at the parts counter.  Could not ask for a better day today weather wise.

Also sat on one of the new Limited low models.  Really liked everything about it EXCEPT the seat.  Felt like I was sitting in a hole and not very comfortable for the male parts.  Did like the new thinner/less wide primary cover....not too shabby and it's a retrofit back through '09.  That baby is slammed...shorter than my SESG (we measured).  Should be a great seller (if you change out that seat)
I loved the low as well. Hope they don't make a cvo limited low!

Why'd you drop the k and n?
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on October 17, 2014, 03:00:29 PM
I loved the low as well. Hope they don't make a cvo limited low!

Why'd you drop the k and n?

Last good AF cleaning was prior to heading to SC (two weeks ago).  Washed it out with the K&N cleaner, allowed it to dry, spot cleaned it a second time (again let it dry), oiled it (learned not to use much....a little goes a long way) and reinstalled.  Got back and it looked like it hadn't been cleaned in two years.  I love the K&N filters (have them in all my cars) but with the way the filter element sits in the weather on our bikes, it really collects "stuff" easy and I refuse to use the rain sock all the time....just when it's raining.  I like wrenching on my bike just like the next guy but I'm tired of doing the filter shuffle so often.  Even if it's newly cleaned, it looks like crap (to me anyway) after just a short time.
Just one of those obsesive/compulsive deals with me I guess.  I know it's clean, just doesn't look it.  I get a good discount on the stock filter at the local dealer.  What I save on the K&N cleaner and oil can offset some of that cost.

A long answer to a short question.........
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on October 17, 2014, 03:05:23 PM
I understand. I just bought the agitator but I have to install it this weekend.
Title: Re: What did you do to or on your CVO today?
Post by: owl893 on October 17, 2014, 05:00:57 PM
Put the rain sock on inside of the AC, not my original idea, it was posted some time ago. Yep, you have to put a hole in it, on the other hand, you don't have to worry about rain.  In that same post someone said "pantyhose" does the same thing, if you don't want to put a hole in your SE sock.

OWL

Oh by the way, rode out to Englewood Beach for lunch, blackened grouper, as good as walleye.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on October 17, 2014, 05:35:24 PM
Put the rain sock on inside of the AC, not my original idea, it was posted some time ago. Yep, you have to put a hole in it, on the other hand, you don't have to worry about rain.  In that same post someone said "pantyhose" does the same thing, if you don't want to put a hole in your SE sock.

OWL

Oh by the way, rode out to Englewood Beach for lunch, blackened grouper, as good as walleye.

GROUPER!!!! Damn you John!!!  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: owl893 on October 17, 2014, 06:35:38 PM
Sorry Jess, I should have taken a picture, the blackened grouper sandwich looked like a surfboard on top of a raft. Five guys, five groupers, five naps later.  Quite a day. ;D

OWL

weather - 83 sunny, low humidity, riding season IS HERE..............
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on October 17, 2014, 06:38:29 PM
Sorry Jess, I should have taken a picture, the blackened grouper sandwich looked like a surfboard on top of a raft. Five guys, five groupers, five naps later.  Quite a day. ;D

OWL

weather - 83 sunny, low humidity, riding season IS HERE..............

OH MAN THAT WAS UNCALLED FOR!!!  :P
Title: Re: What did you do to or on your CVO today?
Post by: cambo on October 17, 2014, 07:57:04 PM
Rode the bike to work and on the way back dropped by the dealership and fell in love with this:  :smitten: :smitten:

(https://farm6.staticflickr.com/5609/15560630652_3c1ae2c72f_b.jpg) (https://flic.kr/p/pH3ino)

The dang bike is made out of glass. The paint job is unbelievable. Why, oh why didn't they use this scheme for the CVO RG????
Title: Re: What did you do to or on your CVO today?
Post by: East Coast on October 17, 2014, 09:45:31 PM
 It looks black! The ultra violet blue shows yet another color shade I havent seen.
Title: Re: What did you do to or on your CVO today?
Post by: SHRK2TH on October 19, 2014, 11:17:16 AM
Added a Jagg / Air assisted cooler, chrome top transmission cover, chrome Clutch release cover, and a Stage one filter (Erotox),
with the Skull face plate.  Then added a Covingtons points cover (Diamond cut) to match the cylinders.  Have now contacted  "Joe" from Extreme to come up with a good scheme for the horn cover...
Title: Re: What did you do to or on your CVO today?
Post by: OBB on October 19, 2014, 05:55:34 PM
Put about 100 miles on it in 50* temps. Next time we do that, we'll make sure we put our chaps on. Gonna take a few hours to thaw out the knees.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on October 19, 2014, 09:41:34 PM
Put about 100 miles on it in 50* temps. Next time we do that, we'll make sure we put our chaps on. Gonna take a few hours to thaw out the knees.
I rode 100 yesterday and 100 on Tuesday. Yesterday was a bit chilly temps in low to mid 50's. Had the chaps on  :2vrolijk_21:

Today was 67 and tomorrow says 68. Looks like a chance to get in some late riding before putting the ol girl to sleep!
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on October 19, 2014, 10:07:50 PM
I rode 100 yesterday and 100 on Tuesday. Yesterday was a bit chilly temps in low to mid 50's. Had the chaps on  :2vrolijk_21:

Today was 67 and tomorrow says 68. Looks like a chance to get in some late riding before putting the ol girl to sleep!

Rode again today as well, I hope to get 4 or 5 more weeks of riding in before I change the oil, wash, wax and put her to bed for the winter.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on October 19, 2014, 10:09:01 PM
Rode again today as well, I hope to get 4 or 5 more weeks of riding in before I change the oil, wash, wax and put her to bed for the winter.

You may just do that, no way in HE double hockey sticks I will though lol. I am too far north of ya!
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on October 19, 2014, 10:37:43 PM
I hear you, just keep that cold weather up there a little longer.
Title: Re: What did you do to or on your CVO today?
Post by: AMEDD_SFC on October 20, 2014, 10:15:13 AM
OH MAN THAT WAS UNCALLED FOR!!!  :P

We Texans have paid for our prime riding weather with three months of 100 degree riding days!    :coolblue:  Went out to Leakey (Twisted Sisters) area this weekend.  Everyone and their brother was out riding!  I love this time of year.

Cheers,

Mark
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on October 20, 2014, 10:18:43 AM
We Texans have paid for our prime riding weather with three months of 100 degree riding days!    :coolblue:  Went out to Leakey (Twisted Sisters) area this weekend.  Everyone and their brother was out riding!  I love this time of year.

Cheers,

Mark

Mark I hope to be in your shoes in the next few years. We would gladly give up the summer months to gain ride time. We can just go jump in the lake instead!

Jesse
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on October 20, 2014, 10:27:37 AM
We Texans have paid for our prime riding weather with three months of 100 degree riding days!    :coolblue:  Went out to Leakey (Twisted Sisters) area this weekend.  Everyone and their brother was out riding!  I love this time of year.
Cheers, Mark

Y'all have had some hot weather.  Been a cooler, dryer Summer here in East TN.  Last few weeks have been very wet, however.  I'm hoping that the wet stuff is done for a while.

Mark, Lord willing I'm headed down Texas way the first week of November.  Riding down to Houston for work.  Been to Houston but not riding and not for many years.  Looking forward to it and if there is time, hopefully be able to catch up with some members while I'm down that way.....
Title: Re: What did you do to or on your CVO today?
Post by: TXGator on October 20, 2014, 11:04:37 AM
We Texans have paid for our prime riding weather with three months of 100 degree riding days!    :coolblue:  Went out to Leakey (Twisted Sisters) area this weekend.  Everyone and their brother was out riding!  I love this time of year.

Cheers,

Mark

I lived outside of San Antonio for quite a while.  Was great to ride in the foothills around Fredricksburg and Bandera.  Bandera has some nice watering holes. Just don't tell'em you know me no matter what..  LOL.
Title: Re: What did you do to or on your CVO today?
Post by: AMEDD_SFC on October 20, 2014, 06:06:48 PM
Y'all have had some hot weather.  Been a cooler, dryer Summer here in East TN.  Last few weeks have been very wet, however.  I'm hoping that the wet stuff is done for a while.

Mark, Lord willing I'm headed down Texas way the first week of November.  Riding down to Houston for work.  Been to Houston but not riding and not for many years.  Looking forward to it and if there is time, hopefully be able to catch up with some members while I'm down that way.....

Depending on the length of your stay, I certainly hope you can get down to Galveston and maybe take the ferry across and do a loop around the bay.  Last year my brother and I took the coast road down to Corpus Cristi and back through the Hill country on Thanksgiving weekend.  Never dropped below 50.  Although a little chilly, chaps, heated seat, grips made it a very nice ride!

Kind Regards,

Mark
Title: Re: What did you do to or on your CVO today?
Post by: AMEDD_SFC on October 20, 2014, 06:14:31 PM
I lived outside of San Antonio for quite a while.  Was great to ride in the foothills around Fredricksburg and Bandera.  Bandera has some nice watering holes. Just don't tell'em you know me no matter what..  LOL.

LOL!  Fortunately for me, they aren't too picky so I get around a bit.  I am planning another day ride around the 1st of November.  Our route takes us to http://www.tpwd.state.tx.us/state-parks/lost-maples  (http://www.tpwd.state.tx.us/state-parks/lost-maples) Lost Maples which will hopefully be starting to show the fall colors.

Cheers!

Mark

Google image for reference.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on October 20, 2014, 07:51:58 PM
Just rode another 100 miles. Can't believe the weather right now. Upper 60's and low 70's and tons of sunshine. Looks like we get another week or 2 before putting the toys in the garage. Got 300 miles in this week so far.
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on October 21, 2014, 08:17:55 AM
Depending on the length of your stay, I certainly hope you can get down to Galveston and maybe take the ferry across and do a loop around the bay.  Last year my brother and I took the coast road down to Corpus Cristi and back through the Hill country on Thanksgiving weekend.  Never dropped below 50.  Although a little chilly, chaps, heated seat, grips made it a very nice ride!
Kind Regards,
Mark

Would love to have that kind of spare time this trip but not to be.  I have to be there by 0700 on Wednesday so blasting down on Tuesday (or may start out after work on Monday) and on my way back home on Friday.
The bay ferry and Corpus Cristi rides sound like a blast....maybe next time down.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on October 21, 2014, 11:20:50 AM
Installed agitator breather and chrome induction module cover.

(http://tapatalk.imageshack.com/v2/14/10/21/2b6d63398aaa6ccc4b79fd436591fff7.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: willyB on October 21, 2014, 01:21:49 PM
Jswerve,

I bought one early this year and had it on for about 2 weeks. I swapped it back to the stock 110 air cleaner. No reason, I just missed the 110 on the air cleaner. Go figure.

If you know anyone looking let me know.

They do look really cool though. I think they make the V of the v-twin standout.
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on October 21, 2014, 01:33:04 PM
Installed agitator breather and chrome induction module cover.

I liked it when the MoCo introduced it and still like it.  Looks really good on our bikes with the agitator wheels.  Ya done gooder dare, Jesse.

Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on October 21, 2014, 01:35:43 PM
I patiently waited for one to appear for sale at a fair price. Finally nabbed it. Sachs says it's probably Harley's best air filter in terms of air flow. He said the stock ac restricts a bit. I like the style so what the hell. 
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on October 21, 2014, 02:05:15 PM
Let's try this Jesse  Oh, to heck with it.  Me and tapatalk just don't work well together..... >:(
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on October 21, 2014, 02:14:33 PM
Let's try this Jesse  Oh, to heck with it.  Me and tapatalk just don't work well together..... >:(

Still no luck Howard?
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on October 21, 2014, 02:36:39 PM
Cleaned the filter, now waiting for it to dry so I can re-oil.
Title: Re: What did you do to or on your CVO today?
Post by: owl893 on October 21, 2014, 04:04:02 PM
Installed agitator breather and chrome induction module cover.

Very nice looking install my friend.

OWL
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on October 21, 2014, 04:19:29 PM
Just rode another 100 miles. Can't believe the weather right now. Upper 60's and low 70's and tons of sunshine. Looks like we get another week or 2 before putting the toys in the garage. Got 300 miles in this week so far.
Looks really good!
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on October 21, 2014, 04:21:35 PM
Thanks guys! Out riding taking pics with fall colors. Post later!
Title: Re: What did you do to or on your CVO today?
Post by: DesertHOG on October 21, 2014, 04:28:21 PM
I installed a Halfsac Core. Meaning I got one Fullsac 1.75" core on my bike and then had to run to the airport. Will get the other one installed next weekend then time for a tune.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on October 21, 2014, 06:59:25 PM
I installed a Halfsac Core. Meaning I got one Fullsac 1.75" core on my bike and then had to run to the airport. Will get the other one installed next weekend then time for a tune.

Simon half a sac is better than no sack!
Title: Re: What did you do to or on your CVO today?
Post by: markp1965 on October 22, 2014, 01:14:16 AM
sadly tucked mine away for the winter
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on October 22, 2014, 07:12:43 AM
Battery light was starting to appear. It was almost 3 years on the original and it was time to replace.  Wasn't about to take any chances while on a 250 mile ride home from daytona on Sunday.  All good now.    Stuart.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on October 22, 2014, 10:41:04 AM
Battery light was starting to appear. It was almost 3 years on the original and it was time to replace.  Wasn't about to take any chances while on a 250 mile ride home from daytona on Sunday.  All good now.    Stuart.
3 years? That's LAME
Title: Re: What did you do to or on your CVO today?
Post by: heath28 on October 22, 2014, 10:44:53 AM
(http://tapatalk.imageshack.com/v2/14/10/22/b533b12640d0b348eb7b580757e045c3.jpg)

Got her all torn down for a little work.
Title: Re: What did you do to or on your CVO today?
Post by: Grizzly on October 22, 2014, 06:36:17 PM
SOLD IT!

At least one of them anyway... I sold my 2005 SEEG Jalapeno today and although I will miss it very much, I just wasn't riding it enough to justify keeping it.

It had 81,824 kms (50,331 miles) on the dial as of today, and when I purchased my 2008 Duracell the '05 had over 62,000+kms.  As most know those darling SEEG's really love the open road, so I'm pleased that it went to an avid rider.

Now it will get ridden on a regular basis with a very excited new Screamin' Eagle family member in the saddle.

Not only is he new to SE's, he's new to the Harley family!
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on October 22, 2014, 08:40:14 PM
26000 miles..  2 things Jesse I don't play around with on my bike.   Having good tires and a good battery.   I broke down once years ago with a bad battery.   Never again if I can prevent it.  Plus it's nice buying new things sometimes.  My tires were just replaced too.  :)
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on October 22, 2014, 09:48:35 PM
26000 miles..  2 things Jesse I don't play around with on my bike.   Having good tires and a good battery.   I broke down once years ago with a bad battery.   Never again if I can prevent it.  Plus it's nice buying new things sometimes.  My tires were just replaced too.  :)
You're only 2k ahead of me and you live in Florida get the lead out! ;)
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on October 22, 2014, 10:22:19 PM
We got the heat.  Tough  on batteries and tires.   You'll be needing one soon,,, they don't last forever.
Title: Re: What did you do to or on your CVO today?
Post by: Lever on October 22, 2014, 11:06:12 PM
replaced all of the heat shield hose clamps  tired of cheap clamps that wont stay tight etc
Title: Re: What did you do to or on your CVO today?
Post by: screaminCVO on October 23, 2014, 01:22:15 AM
3 years? That's LAME

Just fried an original 2 yr old battery, always on a tender. Almost made it to Parker dam and it died going around a corner..........it was 108F. They told me they didn't trust a battery after 2 years there.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on October 23, 2014, 01:58:28 AM
Just fried an original 2 yr old battery, always on a tender. Almost made it to Parker dam and it died going around a corner..........it was 108F. They told me they didn't trust a battery after 2 years there.
That sucks but it makes sense. I keep mine on a tender all winter. Temps in my garage stay between 36 and 40 generally.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on October 23, 2014, 07:20:46 AM
Yesterday I rode the bike for about 150 miles doing some errands and then a nice twisty road for some fun.  Then I washed her when I got home.

Today I will ride her a couple hundred miles, but first I am riding her for a TV commercial being filmed on the Foot Hills Parkway.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on October 23, 2014, 07:29:31 AM
Yesterday I rode the bike for about 150 miles doing some errands and then a nice twisty road for some fun.  Then I washed her when I got home.

Today I will ride her a couple hundred miles, but first I am riding her for a TV commercial being filmed on the Foot Hills Parkway.

We are amongst a celebrity!  :D :orange:
Title: Re: What did you do to or on your CVO today?
Post by: OBB on October 23, 2014, 08:03:00 AM
Yesterday I rode the bike for about 150 miles doing some errands and then a nice twisty road for some fun.  Then I washed her when I got home.

Today I will ride her a couple hundred miles, but first I am riding her for a TV commercial being filmed on the Foot Hills Parkway.
Better make damn sure that bike is spotless then. Can't have us looking like bums.  :huepfenlol2:
Title: Re: What did you do to or on your CVO today?
Post by: porthole on October 23, 2014, 10:13:50 AM
That sucks but it makes sense. I keep mine on a tender all winter. Temps in my garage stay between 36 and 40 generally.

My first one lasted 4.5 years, battery tender only over the winter. When it died - it went dead - right now - and I had to park it and go buy a battery 45 miles away at a dealer on a sunday .........

That was August 09. That replacement is still in the bike, 6+ years. Battery tender goes on every time the bike is parked in the garage. Even when in the camper the tender is on.
I know I got a good one, and I can tell the time is near. Just hoping to squeeze it out until they start salting the roads.
Title: Re: What did you do to or on your CVO today?
Post by: TXGator on October 23, 2014, 01:46:31 PM
uploaded 18.2, activated xm trial, and installed headsets in my full face helmets.
Title: Re: What did you do to or on your CVO today?
Post by: Ozoneman on October 23, 2014, 04:10:50 PM
That's not chicken it's a pork loin. This is prime Iowa farmland ;)

But did you know that the breaded pork tenderloin was invented in Indiana?  1906 at Nick's Kitchen in Huntington IN.  Yes we have a lot of places in Indiana with really great breaded pork tenderloins too!  We ride to as many as we can! Made it to Nick's Kitchen a few weeks ago with a few of my buddies.  Also had sugar cream pie there (another mid-west treat! :2vrolijk_21:

http://www.nickskitchen.net/
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on October 23, 2014, 04:13:26 PM
But did you know that the breaded pork tenderloin was invented in Indiana?  1906 at Nick's Kitchen in Huntington IN.  Yes we have a lot of places in Indiana with really great breaded pork tenderloins too!  We ride to as many as we can! Made it to Nick's Kitchen a few weeks ago with a few of my buddies.  Also had sugar cream pie there (another mid-west treat! :2vrolijk_21:

http://www.nickskitchen.net/

Glad to know you get to enjoy this wonderful type of loin in Indiana. If I am ever in the area we will check it out!
Title: Re: What did you do to or on your CVO today?
Post by: pkl on October 23, 2014, 04:39:26 PM
Prices look more than reasonable. You wait until weather is turning to show this. I'll forget by next year. Next week actually.
Title: Re: What did you do to or on your CVO today?
Post by: cmashark on October 23, 2014, 08:01:25 PM
This happened after 2 phone calls to Steve at GMR...
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on October 23, 2014, 08:16:15 PM
This happened after 2 phone calls to Steve at GMR...
those must have collect calls  :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: cmashark on October 23, 2014, 09:56:55 PM
 ;D nah, gotta send him the old parts so we can get this bike a little stronger...
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on October 23, 2014, 11:11:48 PM
;D nah, gotta send him the old parts so we can get this bike a little stronger...
Steve will take care of you.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on October 24, 2014, 07:53:21 AM
We are amongst a celebrity!  :D :orange:

Found out while riding for the filming it is being used for several things.  Some show on Public television that will air beginning of the year.  It will also be used by SMHD for many things, promotions and advertising.

Better make damn sure that bike is spotless then. Can't have us looking like bums.  :huepfenlol2:

Did a very good wash before I went over for it.

At first the had several runs of us, about 24 bikes on the Foothills Parkway.  Then they picked 8 bikes for some more runs on the Parkway, Joe and I were two of the 8 picked for that.

Then they shot the 8 of us on the beginning of the Dragon, TN side.  Then they did 3 bikes running the whole dragon, I was not one picked for that.  That was the Owner of SMHD, The GM of SMHD and another, The owner and GM ride at 10/10ths  Owners floorboard are ground down and is both sides of his exhaust on his King.

I think each of us that were chosen for the extra 8 will get a copy of the whole thing.

So Yesterday I road mine on the Foothills parkway and the Dragon.
Title: Re: What did you do to or on your CVO today?
Post by: DesertHOG on October 24, 2014, 09:19:58 AM
10/10ths?
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on October 24, 2014, 09:22:32 AM
10/10ths?
Lol Simon I was thinking the same thing.
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on October 24, 2014, 09:42:58 AM
100%?? 

I'll attest to what Dave stated about Scott's (SMHD owner) bike.  He rides the fool outta dat ting.  Don't know if "rides the fool outta dat ting" is anything like 10/10ths, however.....
Title: Re: What did you do to or on your CVO today?
Post by: HillCity on October 24, 2014, 05:18:24 PM
Installed highway pegs on my 2015 FLHXSE today. Completed the breakin mileage. Now I'll ride it like it should be ridden.
Title: Re: What did you do to or on your CVO today?
Post by: Supershooter on October 24, 2014, 07:55:24 PM
Rode in the nice fall air, stopped by the local dealer (60 miles from home), had my wife sit on a new freewheeler, fit like a glove. Got a trade estimate on my 2010 SEUC, $22.5k on the high side. New Limited $40,180 out the door. No thanks I'm shopping for an 11 SESG.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on October 24, 2014, 08:44:33 PM
Rode in the nice fall air, stopped by the local dealer (60 miles from home), had my wife sit on a new freewheeler, fit like a glove. Got a trade estimate on my 2010 SEUC, $22.5k on the high side. New Limited $40,180 out the door. No thanks I'm shopping for an 11 SESG.
Which color 11? Always liked the black and red.
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on October 24, 2014, 08:51:23 PM
Quiet Baffles came in the mail today, will put those on this weekend to see if I like the deeper sound on the big radius pipes.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on October 25, 2014, 07:28:00 AM
10/10ths?

Many times people say they push a bike to 9/10th of the bikes capability.  Well Scott, owner of SMHD push his bikes to the full limits, 10/10th or 100% of the bikes capability.  He drags all the hard pars, floor boards, pipes, floor board brackets, there is no lean at all left in a bike to push it harder.

The is a picture on the Wall at SMHD of him riding with his wife on the back, sparks coming from the floor boards and pipes on the dragon.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on October 25, 2014, 07:39:29 AM
Many times people say they push a bike to 9/10th of the bikes capability.  Well Scott, owner of SMHD push his bikes to the full limits, 10/10th or 100% of the bikes capability.  He drags all the hard pars, floor boards, pipes, floor board brackets, there is no lean at all left in a bike to push it harder.

The is a picture on the Wall at SMHD of him riding with his wife on the back, sparks coming from the floor boards and pipes on the dragon.

Ahhhhhh...
Title: Re: What did you do to or on your CVO today?
Post by: DesertHOG on October 25, 2014, 06:45:08 PM
Many times people say they push a bike to 9/10th of the bikes capability.  Well Scott, owner of SMHD push his bikes to the full limits, 10/10th or 100% of the bikes capability.  He drags all the hard pars, floor boards, pipes, floor board brackets, there is no lean at all left in a bike to push it harder.

The is a picture on the Wall at SMHD of him riding with his wife on the back, sparks coming from the floor boards and pipes on the dragon.

To each his own. I would be turning my tighty whities several shades of brown if I tried that chit.
Title: Re: What did you do to or on your CVO today?
Post by: DesertHOG on October 25, 2014, 06:57:50 PM
Got up early this Saturday and installed my second Fullsac 1.75" Power Core. Went much quicker than the first one. Only took me slightly more than an hour. Then I took my '15 FLTRUSE off to Duke City Harley to get a Dyno Tune. Mind you, I decided to keep the stock header and just open up the baffles. Right now I do not feel much, if any, heat coming off the header. So it will stay this way unless next summer proves to be too hot with the catalytic converter. If so, then a DX pipe will be installed.

Anyway, here are the results. I don't know how much is attributed to the tune using a richer air/fuel ratio and how much, if any, gets credited to the baffles.

(http://i743.photobucket.com/albums/xx76/DesertHOG/2015-175FullsacPowerCores_zpse6a8a813.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on October 25, 2014, 06:59:27 PM
Looks good Simon.
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on October 25, 2014, 08:31:32 PM
I had changed the fluids last week in Orange Crush but had not had occasion to ride it since. When I changed I put Mobil 1 in the motor and primary, and Bel Ray transmission lube in the tranny. WOW what a difference, I had one lifter/pushrods making a bit of noise previously and that seems to be have quietened down considerably, and the transmission definitely shifts smoother than before. That is not to say it shifted poorly before, it was fine, but quieter and easier now. I'm gonna have to try the Bel Ray in Ol Betsy when I change her fluids next time.

Also got a kuryakyn license plate setup and installed it as well along with my metal plates that finally came.

Regards
Shrader
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on October 25, 2014, 09:37:37 PM
I run Mobil 1 in my motor, Mobil 1 4T 10w-40 in the primary, and belray in the tranny. The mobil 1 is quiet at first but after 1 or 2k gets a bit noisy. Love the primary oil and the belray in the trans. I'm going to try the 10w-60 liquimoly in the engine next.
Title: Re: What did you do to or on your CVO today?
Post by: FL CVO on October 25, 2014, 09:39:53 PM
Went by the vendors at the Florida HOG rally and had green LEDs installed around the engine on my 2014 Green/black CVO RK.
Title: Re: What did you do to or on your CVO today?
Post by: Supershooter on October 25, 2014, 09:50:32 PM
Which color 11? Always liked the black and red.

The Black one is I'd like in the shed.
Supershooter
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on October 25, 2014, 10:27:52 PM
Went by the vendors at the Florida HOG rally and had green LEDs installed around the engine on my 2014 Green/black CVO RK.

Bet that looks Sweet!

That's one thing I had done to Betsy that I hadn't really thought about doing to Orange Crush.
Thanks for spending more of my money.... ;D

Regards
Shrader
Title: Re: What did you do to or on your CVO today?
Post by: SHRK2TH on October 25, 2014, 10:44:08 PM
Left with the wife Friday am to Faribault HD to get the bike checked over after putting 350 miles on the new motor. 
Checked out fine updating the tune (132hp/141trq), and had a new rear tire put on.   Had a great time up there both at the shop and downtown, very friendly people.  Came home today looking forward to a great ride tomorrow.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on October 25, 2014, 11:31:17 PM
Left with the wife Friday am to Faribault HD to get the bike checked over after putting 350 miles on the new motor. 
Checked out fine updating the tune (132hp/141trq), and had a new rear tire put on.   Had a great time up there both at the shop and downtown, very friendly people.  Came home today looking forward to a great ride tomorrow.
Just about 2.5 hours north of me. Where you from?
Title: Re: What did you do to or on your CVO today?
Post by: SHRK2TH on October 26, 2014, 06:06:26 AM
Cedar Rapids
Title: Re: What did you do to or on your CVO today?
Post by: hawkeye4jw on October 26, 2014, 07:43:25 AM
 I rode out to Metro Harley in Cedar Rapids last fall to get my 2013 CVO Roadglide. Seemed like good people there.

 Ride Safe
 Jack

Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on October 26, 2014, 07:48:54 AM
I rode out to Metro Harley in Cedar Rapids last fall to get my 2013 CVO Roadglide. Seemed like good people there.

 Ride Safe
 Jack
One of the handful of dealers in the state of Iowa I've never been too.
Title: Re: What did you do to or on your CVO today?
Post by: SHRK2TH on October 26, 2014, 09:10:25 AM
Metro, Silver Eagle, and Hawkeye Harley are three that are close here to me.  Great people and customer service.
Down fall is, none of the three tune with TTS.  Jason at Faribault HD has good reputation in doing so and has proved it to me
with the last two motors.  Couple more hours and will be heading out for a days ride  :)
Title: Re: What did you do to or on your CVO today?
Post by: Lever on October 26, 2014, 05:13:42 PM
Washed bike in stalled new head badges
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on October 26, 2014, 05:20:54 PM
Metro, Silver Eagle, and Hawkeye Harley are three that are close here to me.  Great people and customer service.
Down fall is, none of the three tune with TTS.  Jason at Faribault HD has good reputation in doing so and has proved it to me
with the last two motors.  Couple more hours and will be heading out for a days ride  :)

I've been to McGrath in Coralville quite a few times and we stop at Silver Eagle on the way to the Mississippi river frequently. I also like Dubuque Harley. I deal with Ernie's in Algona. Closest to me and so far the best treatment.
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on October 26, 2014, 05:26:19 PM
Washed bike in stalled new head badges

Nice  :2vrolijk_21:



Where did you get them?
Title: Re: What did you do to or on your CVO today?
Post by: TN on October 26, 2014, 07:22:20 PM
rode 300mi plus this weekend after changing these parts out. Makes me feel all warm and fuzzy inside.
first time bike has been gone in to with 36,500 on the odometer. worse thing I saw was the cam chain tensioner shoes.
cams and lifters showed some wear, no discoloration.


here’s to the next 40k.  :drink:


Ride On
Title: Re: What did you do to or on your CVO today?
Post by: SHRK2TH on October 26, 2014, 07:54:04 PM
I've been to McGrath in Coralville quite a few times and we stop at Silver Eagle on the way to the Mississippi river frequently. I also like Dubuque Harley. I deal with Ernie's in Algona. Closest to me and so far the best treatment.

Maybe hook up some time in the future to put a face to the names... You may know, McGrath is building a new store west of Theisens, and there is a rumor that it will be Iowa's largest dealership???   Also, had a great ride today, 100+ miles even though a little on the chilli side starting out, hitting a few bar/resturants keeping up with Sprint cup race.  Congrats to Dale Jr.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on October 26, 2014, 08:23:25 PM
Maybe hook up some time in the future to put a face to the names... You may know, McGrath is building a new store west of Theisens, and there is a rumor that it will be Iowa's largest dealership???   Also, had a great ride today, 100+ miles even though a little on the chilli side starting out, hitting a few bar/resturants keeping up with Sprint cup race.  Congrats to Dale Jr.
For sure!
Title: Re: What did you do to or on your CVO today?
Post by: Lever on October 26, 2014, 08:48:54 PM
Nice  :2vrolijk_21:



Where did you get them?
legacy bagger ..they are on facebook
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on October 26, 2014, 10:52:53 PM
Thanks!   :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: hawkeye4jw on October 27, 2014, 04:34:21 AM
Metro, Silver Eagle, and Hawkeye Harley are three that are close here to me.  Great people and customer service.
Down fall is, none of the three tune with TTS.  Jason at Faribault HD has good reputation in doing so and has proved it to me
with the last two motors.  Couple more hours and will be heading out for a days ride  :)

My bike has a TTS on it and I was under the impression they tuned it at Metro. The guy I bought it from did all his dealings with them.
 Long story short is when I bought the bike I bought it from a private party. He was taking my 09 as a trade and using it as a trade on his new CVO. The dealer actually did all the paper work so it saved both of us taxes. Worked out well.

 Ride safe
 Jack
Title: Re: What did you do to or on your CVO today?
Post by: SHRK2TH on October 27, 2014, 07:30:16 AM
Jack,  Let me re-phrase that.  They may be able to tune with TTS, but not have it mastered as some others...
When I bought my Fullsac set up, Cams, header pipes and DX pipe.  Silver Eagle loaded the can tune, other than that
they had no experience in that software.  As not all of the same bikes run the same on a can tune, Jason at Faribault
tuned it to perfection.  I know when I was out at Metro 3 weeks ago getting a battery checked due to starting issues, we first check to see if the ACR's were enabled, being I have a built 120 installed.  They could check through the ECM, but not change anything due to I have the TTS.  Ended up being a battery anyway.
Title: Re: What did you do to or on your CVO today?
Post by: wachuko on October 27, 2014, 12:55:12 PM
1K service done yesterday.
Title: Re: What did you do to or on your CVO today?
Post by: 2 ROSE on October 27, 2014, 01:46:43 PM
Gone Riding....sunny and a high of 70 today.
Title: Re: What did you do to or on your CVO today?
Post by: hawkeye4jw on October 27, 2014, 02:25:01 PM
Jack,  Let me re-phrase that.  They may be able to tune with TTS, but not have it mastered as some others...
When I bought my Fullsac set up, Cams, header pipes and DX pipe.  Silver Eagle loaded the can tune, other than that
they had no experience in that software.  As not all of the same bikes run the same on a can tune, Jason at Faribault
tuned it to perfection.  I know when I was out at Metro 3 weeks ago getting a battery checked due to starting issues, we first check to see if the ACR's were enabled, being I have a built 120 installed.  They could check through the ECM, but not change anything due to I have the TTS.  Ended up being a battery anyway.

 Interesting. I may have to find someone close to me to redyno it. The guy I bought it from had Metro do the work I thought, so figured they had experience with the TTS. Good info. Thanks.

 Ride Safe
 JAck
Title: Re: What did you do to or on your CVO today?
Post by: TXGator on October 27, 2014, 02:44:22 PM
Corrected the rear air shock E.D. issue and bought the pencil pump.  Upped the pressure to 38lbs.  Hopefully that will stop the bottoming out.
Title: Re: What did you do to or on your CVO today?
Post by: DesertHOG on October 27, 2014, 02:54:48 PM
Corrected the rear air shock E.D. issue and bought the pencil pump.  Upped the pressure to 38lbs.  Hopefully that will stop the bottoming out.

My experience with the HD rear air shock system is that the only way to stop the bottoming is to replace it with a quality performance coil spring shock. I have used both Works Performance and Bitubos from Traxxion. I am really likely the Bitubos I put on my 15 FLTRUSE. Suggest you look at the discussion session on suspension.

Good luck,
DH
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on October 27, 2014, 03:06:41 PM
My experience with the HD rear air shock system is that the only way to stop the bottoming is to replace it with a quality performance coil spring shock. I have used both Works Performance and Bitubos from Traxxion. I am really likely the Bitubos I put on my 15 FLTRUSE. Suggest you look at the discussion session on suspension.

Good luck,
DH

You beat me to it, Simon......
Title: Re: What did you do to or on your CVO today?
Post by: TXGator on October 27, 2014, 05:35:59 PM
That may be the case in a bit but not right now.  I ended up taking the stock air shocks to 42 lbs.  I really can't believe how much that changed the handling.  I was really shocked to find that the dealer (or whoever) loaded it to 15lbs from the showroom.  When I saw that I thought it was a screw up.  Then I talked to a buddy that bought his 2 weeks after mine from a different dealer.  Found his was set the same.  If you read the guide that is set for like a 150lbs rider with no cargo and no passenger.  A bit of common sense would say they should be set higher than that as a base.

Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on October 28, 2014, 09:24:49 AM
Simon and Haird have it right.  I think the best use for HD air shocks is as an anchor for my Jetski.  Took about 6 pounds off the bike switching to Ohlins and now it rides right and does not bottom.
Title: Re: What did you do to or on your CVO today?
Post by: T-Roy on October 28, 2014, 09:40:45 AM
I just realized that I never posted a picture after adding an air wing rack to the swinebox tourpack a while back. Well here is a picture but there is a stupid helmet strapped down to the rack in this picture. I will have to take some better pictures when I get back in from offshore.
Title: Re: What did you do to or on your CVO today?
Post by: RoadMonkey on October 30, 2014, 11:12:34 AM
reinstalled the front lowers w/speakers... You think I would have done that BEFORE I rode to Daytona last week. It's All Good! They go on, they go off...From lifting the bike at start and putting the tools away at finish, I have it down to 12 minute swap.
Title: Re: What did you do to or on your CVO today?
Post by: TN on October 31, 2014, 12:20:09 PM
rode around the block this morning, 100mi er so. A clear crisp morning to do so, it has now warmed up to 73.


Ride On


TN
Title: Re: What did you do to or on your CVO today?
Post by: andpopse on October 31, 2014, 01:37:46 PM
Went for a ride with the missus, 31st October, UK and 80 degs !!! It had to be done as probably got 5 months of cold wet weather to come.
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on October 31, 2014, 01:46:56 PM
Took an hour or so off work and had two new tires installed and purchased a new battery in preperation for the trip next week.  Not bad price wise for all three (I installed the battery).  Got a great dealer that works with me on pricing...even though I didn't buy Ginger from them.  However, I have spent my share on bikes from the Brown family over many years.  Except for one issue years ago, have always had an enjoyable experience at their shops.

Lord willing, headed to Houston Monday......
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on October 31, 2014, 03:19:06 PM
Took an hour or so off work and had two new tires installed and purchased a new battery in preperation for the trip next week.  Not bad price wise for all three (I installed the battery).  Got a great dealer that works with me on pricing...even though I didn't buy Ginger from them.  However, I have spent my share on bikes from the Brown family over many years.  Except for one issue years ago, have always had an enjoyable experience at their shops.

Lord willing, headed to Houston Monday......
Safe travels Howard.
Title: Re: What did you do to or on your CVO today?
Post by: ptnlinda on November 01, 2014, 06:59:28 AM
Spent the day replacing most of the bolts with stainless ones. My stainless bolts are now on their 3rd Harley. Every time I trade a bike in on a new one I take all the Stainless hardware off ready for the new one.
It made a huge difference. Been one of my gripes with the CVO that you pay so much for it and it is covered in all that good looking chrome which is in turn spoilt by the MOCO's use of Nick Cadnium Bolts and fasteners.I have always just bought the appropriate stainless bolts and polished them myself. Only takes a couple of minutes per bolt.
Title: Re: What did you do to or on your CVO today?
Post by: FLHTCUSE7 on November 01, 2014, 08:52:50 AM
I plan on at least getting it started and ride a few miles. Have not ridden the HD for months.

Title: Re: What did you do to or on your CVO today?
Post by: Lever on November 01, 2014, 09:03:23 AM
Well do to  the heavy freeze the road people applied the liquid salt on the bridges and over pass now ...so I'm done riding till spring
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on November 01, 2014, 09:32:45 AM
Picking up oil and filter today, not sure when I will need it to put the bike to bed for the winter. 
Title: Re: What did you do to or on your CVO today?
Post by: DesertHOG on November 01, 2014, 07:10:03 PM
1k service on my 2015 FLTRUSE.

DH
Title: Re: What did you do to or on your CVO today?
Post by: dayne66 on November 01, 2014, 08:55:14 PM
Took it for a run to Ucluelet.....it ran fantastically with the max ambient temp being 11*c.....only got 300 km to 20l....but sure had fun in the twisties! Only 3 cars 'got in my way' in each direction between Port Albernie and Ucluelet. Not a drop of rain...but had a cloud 'pouring' off the side of a mountain. Probably the last good ride of the season.
Title: Re: What did you do to or on your CVO today?
Post by: baddyna96 on November 02, 2014, 04:55:14 PM
The GF and I did about a hundred mile lunch ride today. Probably the last one for the year.
Title: Re: What did you do to or on your CVO today?
Post by: baddyna96 on November 02, 2014, 08:50:50 PM
Just ordered a V&H Fuelpak 3 to hopefully clear up the small amount of popping on decel that I'm getting. It started after installing HD Street Cannons.







Title: Re: What did you do to or on your CVO today?
Post by: CVO Aqua-Glider on November 02, 2014, 10:05:11 PM
Gave her a well deserved bath. :)
Title: Re: What did you do to or on your CVO today?
Post by: Delta on November 03, 2014, 03:52:19 PM
Added a 10" Windsplitter windshield today. Went for a good ride with the dealers demo shield and I liked it so much I bought one. I'm 6'3" tall and I it seems to be perfect for me.
Title: Re: What did you do to or on your CVO today?
Post by: RoadMonkey on November 03, 2014, 05:18:12 PM
Gave her a well deserved bath. :)
:2vrolijk_21: I love that color combo..great looking bike!!!
Title: Re: What did you do to or on your CVO today?
Post by: CVO Aqua-Glider on November 04, 2014, 09:37:44 PM
:2vrolijk_21: I love that color combo..great looking bike!!!

Thanks, yea, I look it too. :)
Title: Re: What did you do to or on your CVO today?
Post by: martys on November 06, 2014, 08:50:18 AM
I did something that is very rare for Nov. in Canada  :) I went for an 80km (50 mi) ride yesterday  :pepper: :pepper: :pepper:  The sun was shining, the temp. was about 45 F, but the wind was blowing at about 35 mph off the lake.  So I bundled up and took the SERG out for what was probably the last run before they start putting salt and brine on the roads.  It was a Great ride :2vrolijk_21:

Marty
Title: Re: What did you do to or on your CVO today?
Post by: Bav on November 06, 2014, 03:09:06 PM
Fitted a visor style headlamp trim ring to my SERK. Instructions say to fit the new trim over the original trim ring but I have fitted it instead of. Seems to fit ok and is secure. What has everyone else done? I spoke to two other owners at a rally, one who had fitted over and said it was a bad fit and the other that had fitted it instead of and said it was a good fit.

(http://tapatalk.imageshack.com/v2/14/11/06/684df5fb54bd55420480b63289e458d6.jpg)


Sent from my iPad using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on November 06, 2014, 06:04:31 PM
Looks like it fits perfectly! Looks good too  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: fxdx on November 06, 2014, 06:29:57 PM

Looks nice!

I am very unhappy with the one I installed. For some reason I never thought to take off the old one. Maybe because the say specifically to install the new over the old. I am going to try it tomorrow. Thanks!


Title: Re: What did you do to or on your CVO today?
Post by: DOWNTOWN DON on November 06, 2014, 08:23:29 PM
When I did my 2012 cvosg, i left the original ring on, but stuck a strip of 3/8 foam all the way around it before installing the new outer ring, and this seemed to center the new ring better. If this makes sense.
Title: Re: What did you do to or on your CVO today?
Post by: Billy on November 06, 2014, 09:35:58 PM
Fitted a visor style headlamp trim ring to my SERK. Instructions say to fit the new trim over the original trim ring but I have fitted it instead of. Seems to fit ok and is secure. What has everyone else done? I spoke to two other owners at a rally, one who had fitted over and said it was a bad fit and the other that had fitted it instead of and said it was a good fit.

(http://tapatalk.imageshack.com/v2/14/11/06/684df5fb54bd55420480b63289e458d6.jpg)

What is the part #. They told me that they do not have covers for the 14. I think they look great.   Billy
Sent from my iPad using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: wachuko on November 07, 2014, 12:30:36 AM
Installed the FuelMoto headpipe that I had from my previous bike.  Also installed the saddlebag spoilers. Done with mods for now. :orange:  :2vrolijk_21:

(http://i151.photobucket.com/albums/s144/wachuko/Motorcycles/RK%20CVO/09EB45B9-AF0B-458D-B292-84FCE37C1F82_zpszk0ov1ye.jpg)

(http://i151.photobucket.com/albums/s144/wachuko/Motorcycles/RK%20CVO/8BE9308D-4B13-4E4C-AE40-40B424776661_zpsk2tz3nzx.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: wachuko on November 07, 2014, 12:33:54 AM
Looks great!!  :2vrolijk_21:  Any chance you can take and share a side profile photo??  Part number as well?

Fitted a visor style headlamp trim ring to my SERK. Instructions say to fit the new trim over the original trim ring but I have fitted it instead of. Seems to fit ok and is secure. What has everyone else done? I spoke to two other owners at a rally, one who had fitted over and said it was a bad fit and the other that had fitted it instead of and said it was a good fit.

(http://tapatalk.imageshack.com/v2/14/11/06/684df5fb54bd55420480b63289e458d6.jpg)


Sent from my iPad using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Bav on November 07, 2014, 05:15:16 AM
Part number is 69733-05. A couple of more pics attached.

(http://tapatalk.imageshack.com/v2/14/11/07/9b9ef89edc00f94fbf2547495595042a.jpg)

(http://tapatalk.imageshack.com/v2/14/11/07/2fb41cf92cd32e8fb53512615faa4a5a.jpg)

Now now Wachuko you said you are done with mods for now. Perhaps Santa will get you one


Sent from my iPad using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on November 07, 2014, 05:56:25 AM
I put that visor on my 14 with the stock visor underneath and had no issues with the install.

Regards
Shrader
Title: Re: What did you do to or on your CVO today?
Post by: wachuko on November 07, 2014, 06:17:23 AM
Part number is 69733-05. A couple of more pics attached.

Now now Wachuko you said you are done with mods for now. Perhaps Santa will get you one


Sent from my iPad using Tapatalk

 :D  :2vrolijk_21:  we are never really done with them, are we? Hahahahaha  Thank you!!
Title: Re: What did you do to or on your CVO today?
Post by: wachuko on November 07, 2014, 06:21:08 AM
If anyone wants a visor for their headlamp, I have a chrome one that's essentially unused. Bought it, installed it... didn't like it and removed it.  Been sitting ever since.  $20 plus shipping...

If it is the same one in the photos, I will take it.

http://www.harley-davidson.com/store/visor-style-headlamp-trim-ring-pa-11-6973305--1
Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on November 07, 2014, 09:52:05 AM
Removed my tour pack without using the quick release kit. It is actually pretty easy on the 2014/2015 CVOs and leaves you with a nice clean look. When switching back and forth the tour pack will just sit there without the bolts. With the new design of the rigid tour pack mount the front of the mount slides into the opening first and holds the tour pack in place when the back of the mount is set down. Down side is it takes about 10 minutes longer to switch out compared to a quick release setup. Up side is way cheaper.  :2vrolijk_21: I used the HD curved license plate mount with the Kuryakyn LED license plate frame. J&M hidden AM/FM and CB antennas. 2013 Street Glide seat with a back rest from a 2009 CVO Road Glide and the plastic chrome filler strips from a 2014 Street Glide to fill the slots where the tour pack mounts. I also pulled the saddle bag lock wiring out of the main tour pack harness and ran the wiring under the top chrome rail so that they do not have to be messed with switching back and forth.
Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on November 07, 2014, 09:52:51 AM
More pictures ...
Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on November 07, 2014, 09:53:19 AM
More pictures ...
Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on November 07, 2014, 09:53:43 AM
More pictures ...
Title: Re: What did you do to or on your CVO today?
Post by: Mr. Warlock on November 07, 2014, 05:45:12 PM
More pictures ...

Great job, I likey!!! :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: OBB on November 07, 2014, 06:14:27 PM
Great job. Glad to see your bike made it before winter  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on November 07, 2014, 08:37:13 PM
Looks great Joe.

Joe told me about how to do the wiring Harnes and the plate modification.  So I used that when I set mine up solo a couple weeks ago.

Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on November 07, 2014, 08:39:15 PM
Another.  I used quick detach hard ware as I will run my tour pack solo when its on.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on November 07, 2014, 08:43:46 PM
Again, with Tour pack on, solo
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on November 07, 2014, 08:46:41 PM
Last one, a rear angle tour pack on
Title: Re: What did you do to or on your CVO today?
Post by: DesertHOG on November 07, 2014, 08:54:58 PM
Nice job Joe and Dave, doing mine this weekend.

 :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on November 07, 2014, 08:57:28 PM
Last one, a rear angle tour pack on
(http://www.cvoharley.com/smf/index.php?action=dlattach;topic=89705.0;attach=273859;image)
Dave... looks good... but you do need to do something w/your personalized plate... just sayin' ;) :D :D

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: Billy on November 07, 2014, 10:40:06 PM
Again, with Tour pack on, solo
How do you set up for a solo tour pak? Thanks Billy
Title: Re: What did you do to or on your CVO today?
Post by: SHRK2TH on November 08, 2014, 05:16:15 PM
Mounted the tour pack to the George Anderson relocation plate, also had to slightly modify the arm rest plate to make it work on a CVO.  Then removed stock wheels and replaced them with 2015 Aggressor wheels/tires, etc.  Pretty much done now, other than waiting on custom horn cover from Joe to finish it off.  Like the wrapped fenders he is doing, but gotta stop somewhere. Ha, did anyone every say this gets addictive?
Title: Re: What did you do to or on your CVO today?
Post by: TXGator on November 08, 2014, 05:34:26 PM
Had the V&H Power Dual Head Pipes mounted and SERT..  Came out to 92 RWHP and 110 RW ft.lbs torque.  Sounds really nice and is much cooler to my right heel. 
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on November 08, 2014, 06:01:24 PM
Mounted the tour pack to the George Anderson relocation plate, also had to slightly modify the arm rest plate to make it work on a CVO.  Then removed stock wheels and replaced them with 2015 Aggressor wheels/tires, etc.  Pretty much done now, other than waiting on custom horn cover from Joe to finish it off.  Like the wrapped fenders he is doing, but gotta stop somewhere. Ha, did anyone every say this gets addictive?




Sharp sharp, would love to see more pics of your ride.
Title: Re: What did you do to or on your CVO today?
Post by: SHRK2TH on November 08, 2014, 07:07:36 PM



Sharp sharp, would love to see more pics of your ride.

Thank you, here is a couple more. 
Title: Re: What did you do to or on your CVO today?
Post by: SHRK2TH on November 08, 2014, 07:08:28 PM
Thank you, here is a couple more.
Title: Re: What did you do to or on your CVO today?
Post by: DesertHOG on November 08, 2014, 08:37:34 PM
Mounted the tour pack to the George Anderson relocation plate, also had to slightly modify the arm rest plate to make it work on a CVO.  Then removed stock wheels and replaced them with 2015 Aggressor wheels/tires, etc.  Pretty much done now, other than waiting on custom horn cover from Joe to finish it off.  Like the wrapped fenders he is doing, but gotta stop somewhere. Ha, did anyone every say this gets addictive?

Nice to see the GA Relocator find a good home. Nice Job.

Simon
Title: Re: What did you do to or on your CVO today?
Post by: SHRK2TH on November 08, 2014, 08:58:59 PM
Nice to see the GA Relocator find a good home. Nice Job.

Simon

Thank you Simon.  Nice option to have to move it back.  Plus adding the arm rest makes for a very happy wife :)
Title: Re: What did you do to or on your CVO today?
Post by: DesertHOG on November 08, 2014, 09:07:21 PM
I took the Tour-pak off today and install the 4-point detach rack mount. I got the plate relocated for the most part but I need to pick Dave or Joe's brain and determine which wire I connect the plate holder LED lighting.

(http://i743.photobucket.com/albums/xx76/DesertHOG/2015_CVO_UltraRoadGlide/IMG_20141108_141102_zpsf7e757c7.jpg) (http://s743.photobucket.com/user/DesertHOG/media/2015_CVO_UltraRoadGlide/IMG_20141108_141102_zpsf7e757c7.jpg.html)

(http://i743.photobucket.com/albums/xx76/DesertHOG/2015_CVO_UltraRoadGlide/IMG_20141108_141126_zps9467d98e.jpg) (http://s743.photobucket.com/user/DesertHOG/media/2015_CVO_UltraRoadGlide/IMG_20141108_141126_zps9467d98e.jpg.html)

(http://i743.photobucket.com/albums/xx76/DesertHOG/2015_CVO_UltraRoadGlide/IMG_20141108_141148_zps4b15f90c.jpg) (http://s743.photobucket.com/user/DesertHOG/media/2015_CVO_UltraRoadGlide/IMG_20141108_141148_zps4b15f90c.jpg.html)

(http://i743.photobucket.com/albums/xx76/DesertHOG/2015_CVO_UltraRoadGlide/IMG_20141108_141207_zpsd1904cc8.jpg) (http://s743.photobucket.com/user/DesertHOG/media/2015_CVO_UltraRoadGlide/IMG_20141108_141207_zpsd1904cc8.jpg.html)

(http://i743.photobucket.com/albums/xx76/DesertHOG/2015_CVO_UltraRoadGlide/IMG_20141108_141625_zps11a06f83.jpg) (http://s743.photobucket.com/user/DesertHOG/media/2015_CVO_UltraRoadGlide/IMG_20141108_141625_zps11a06f83.jpg.html)

(http://i743.photobucket.com/albums/xx76/DesertHOG/2015_CVO_UltraRoadGlide/IMG_20141108_174043_zps95315ff1.jpg) (http://s743.photobucket.com/user/DesertHOG/media/2015_CVO_UltraRoadGlide/IMG_20141108_174043_zps95315ff1.jpg.html)
Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on November 08, 2014, 10:13:35 PM
I took the Tour-pak off today and install the 4-point detach rack mount. I got the plate relocated for the most part but I need to pick Dave or Joe's brain and determine which wire I connect the plate holder LED lighting. I know I want the running light so I figure it's either the red/yellow or the blue. I am guessing red/yellow but waiting for a thumbs up or down from the definitive source.

Looks great.  :2vrolijk_21:

As far as the LED lighting goes take the taillight off and there is a blank 3 pin connector next to the where the tail light plugs in. Looking at the connector the inside pin is the positive and the outer pin is the negative. Leave the middle pin empty. When the bike is in the run position the LED gets power. HD sells the individual pin connectors (73191-96). After I connected the pins I used some clear silicone and partially filled the connector and once set it will keep the pins from vibrating loose. If you ever need to take it apart the silicone is pretty easy to dig out. 
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on November 08, 2014, 10:14:22 PM
How do you set up for a solo tour pak? Thanks Billy

Here is a post with detailed instructions I posted today.

http://www.cvoharley.com/smf/index.php?topic=98618.msg1279323#msg1279323 (http://www.cvoharley.com/smf/index.php?topic=98618.msg1279323#msg1279323)
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on November 08, 2014, 10:17:01 PM
Looks very good Simon as far as the wiring exactly like Joe said.  My pictures I sent should make it clear, they are also in my thread.

http://www.cvoharley.com/smf/index.php?topic=98618.msg1279323#msg1279323 (http://www.cvoharley.com/smf/index.php?topic=98618.msg1279323#msg1279323)
Title: Re: What did you do to or on your CVO today?
Post by: Grizzly on November 08, 2014, 11:23:54 PM
http://i743.photobucket.com/albums/xx76/DesertHOG/2015_CVO_UltraRoadGlide/IMG_20141108_174043_zps95315ff1.jpg

Great idea for your custom plate... I had the same idea, but it was already taken so I had to go with "2ORN"
Title: Re: What did you do to or on your CVO today?
Post by: DesertHOG on November 08, 2014, 11:28:34 PM
(http://i743.photobucket.com/albums/xx76/DesertHOG/2015_CVO_UltraRoadGlide/IMG_20141108_174043_zps95315ff1.jpg)

Great idea for your custom plate... I had the same idea, but it was already taken so I had to go with "2ORN"

 :2vrolijk_21: Thanks

DH
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on November 09, 2014, 05:57:18 AM
Looks great Simon,,, is there now an amp in one of your saddlebags? 
Title: Re: What did you do to or on your CVO today?
Post by: DesertHOG on November 09, 2014, 08:39:04 AM
Looks great Simon,,, is there now an amp in one of your saddlebags?

Nope, stereo works just fine only 2 fewer speakers. I think the amp might be up front under the shark fairing. The '11 fltruse had the amp in the rear.

Simon
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on November 09, 2014, 08:50:59 AM
Nope, stereo works just fine only 2 fewer speakers. I think the amp might be up front under the shark fairing. The '11 fltruse had the amp in the rear.

Simon
Simon,

You are correct, the amp for the rear speakers in in the fairing on 14 and newer CVO RG, and Limited.
Title: Re: What did you do to or on your CVO today?
Post by: porthole on November 09, 2014, 11:06:25 AM
Thank you Simon.  Nice option to have to move it back.  Plus adding the arm rest makes for a very happy wife :)

Are those the HD rests?
Can your wife put "weight" on them?
My wife likes to use the backrest as a lift point when we see a bump. I added speaker pods and mounted them up against the backrest to give it added support because of that.
Title: Re: What did you do to or on your CVO today?
Post by: SHRK2TH on November 09, 2014, 11:36:38 AM
Are those the HD rests?
Can your wife put "weight" on them?
My wife likes to use the backrest as a lift point when we see a bump. I added speaker pods and mounted them up against the backrest to give it added support because of that.

Yes they are, HD. .  They will easily support her arms, I would recommend putting her weight on them. 
Most of the time, your already across the bump before you can react quick enough anyway.  They say the fitment is not for CVO,
all I had to do was to notch out two screw access holes to run the tour pack bolts though.
Title: Re: What did you do to or on your CVO today?
Post by: porthole on November 09, 2014, 12:17:55 PM
Most of the time, your already across the bump before you can react quick enough anyway. 


Over the years I have gotten pretty good at reading the road when BSR'ing. I see something and just give a quick "body move" and she knows to brace herself. We can probably minimize 9 out of 10 bumps this way.

It's the big ones she sees coming. She will lift her butt off the seat using the arm rest extension on the back rest.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on November 09, 2014, 01:22:53 PM
Over the years I have gotten pretty good at reading the road when BSR'ing. I see something and just give a quick "body move" and she knows to brace herself. We can probably minimize 9 out of 10 bumps this way.

It's the big ones she sees coming. She will lift her butt off the seat using the arm rest extension on the back rest.
Oh I bet you give her the "body move" Duane Hehe
Title: Re: What did you do to or on your CVO today?
Post by: DesertHOG on November 09, 2014, 05:22:18 PM
I complete the rear lighting work on the license plate holder move from TP frame to fender. I got the pin and receptacle housing required.

Pin/Contact:                    73191-96
3-Pin Receptacle Housing: 73153-96BK

Thanks again Dave and Joe,
Simon

(http://i743.photobucket.com/albums/xx76/DesertHOG/2015_CVO_UltraRoadGlide/IMG_20141109_145727_zpse27808f7.jpg) (http://s743.photobucket.com/user/DesertHOG/media/2015_CVO_UltraRoadGlide/IMG_20141109_145727_zpse27808f7.jpg.html)

(http://i743.photobucket.com/albums/xx76/DesertHOG/2015_CVO_UltraRoadGlide/IMG_20141109_150038_zps673a0f2f.jpg) (http://s743.photobucket.com/user/DesertHOG/media/2015_CVO_UltraRoadGlide/IMG_20141109_150038_zps673a0f2f.jpg.html)

Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on November 09, 2014, 08:48:44 PM
I complete the rear lighting work on the license plate holder move from TP frame to fender. I got the pin and receptacle housing required.

Pin/Contact:                    73191-96
3-Pin Receptacle Housing: 73153-96BK

Thanks again Dave and Joe,
Simon


Thank you for the part number for the receptacle housing.  Hope you do not mind I will add that to my post of parts for it.
Title: Re: What did you do to or on your CVO today?
Post by: DesertHOG on November 09, 2014, 08:54:58 PM
Good to go Dave
Title: Re: What did you do to or on your CVO today?
Post by: cmashark on November 10, 2014, 01:07:33 AM
Ordered more parts...
Wards fans in granite
Fuel Moto ceramic 2-1-2 headpipe with full size crossover
Jackpot dyno tuned 4 inch mufflers
Tw-555 cams

A couple weeks ago:
Picked up a heated Mustang seat from a forum member
Sent heads and jugs to be worked (soon to be 113)

I'm thinking I have a fun weekend coming up soon. :bananarock:
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on November 10, 2014, 07:54:09 AM
Well, not today but over the past week, put 2,059 miles on Ginger.  Knoxville to Biloxi, MS last Monday, Biloxi to Houston on Tuesday, conference on Wednesday and Thursday, Houston to Prattville, AL Friday and Prattville home on Saturday.  Had a great trip, Ginger ran like a champ (glad I put those new tires on her) and the Hilton let me park her right up next to the door in an alcove so they could keep an eye on her and keep her out of the rain (rained Wed. and Thursday all day in Houston...glad the company supplied a bus to the office...)

Did not get a chance on Friday to run to the Galvaston, TX rally but passed a LOT of bikes heading that way as I was heading East on I-10 Friday.  Maybe next time.....

Ginger got a full wash and wax yesterday.....she deserved it.  Only issue was Vickie couldn't make the trip with me as that would'a made it perfect.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on November 10, 2014, 11:25:30 AM
Put mine away for the winter. Cold front moving into this evening. Some light snow and temps in the 20's expected.
Title: Re: What did you do to or on your CVO today?
Post by: cmashark on November 10, 2014, 02:25:06 PM
Put mine away for the winter. Cold front moving into this evening. Some light snow and temps in the 20's expected.

You are making a strong arguement of why I do not want to move back to Kansas City when I retire.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on November 10, 2014, 02:27:51 PM
You are making a strong arguement of why I do not want to move back to Kansas City when I retire.
Kc has a little better riding season. I'm about 4.5 hours north.
Title: Re: What did you do to or on your CVO today?
Post by: baddyna96 on November 10, 2014, 04:17:37 PM
Jswerve, what windshield are you running in your pic? How is it for your passenger? I'm running the stock Windsplitter on my SESG for now, but getting some complaints about buffeting from the boss. Thanks in advance, Mark
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on November 10, 2014, 04:42:28 PM
Jswerve, what windshield are you running in your pic? How is it for your passenger? I'm running the stock Windsplitter on my SESG for now, but getting some complaints about buffeting from the boss. Thanks in advance, Mark

Mark I run a LRS Ultra recurve 7". Wife never complains.


Temps have dropped almost 30 degrees since noon.
Title: Re: What did you do to or on your CVO today?
Post by: baddyna96 on November 10, 2014, 05:38:14 PM
Mark I run a LRS Ultra recurve 7". Wife never complains.


Temps have dropped almost 30 degrees since noon.
Thanks for the reply. I'm in Maryland for the week, its nice here for now, but temps are supposed to drop mid week. I'm afraid to look at the Chicago area weather for next weekend. I'm guessing that I might be done for the year also!
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on November 10, 2014, 05:39:03 PM
Thanks for the reply. I'm in Maryland for the week, its nice here for now, but temps are supposed to drop mid week. I'm afraid to look at the Chicago area weather for next weekend. I'm guessing that I might be done for the year also!

Don't bother checking Chicago, trust me lol
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on November 10, 2014, 06:26:58 PM
Put mine away for the winter. Cold front moving into this evening. Some light snow and temps in the 20's expected.

I'm still resisting. Your cold front is headed this way later this week and the dude on TV is using that S word  >:(

If it does sn** then I'll spend the weekend in the garage cleaning all the nooks and crannies of the bike and reluctantly put it into hibernation with the other bikes...... I HATE WINTER
Title: Re: What did you do to or on your CVO today?
Post by: wachuko on November 10, 2014, 07:23:10 PM
If anyone wants a visor for their headlamp, I have a chrome one that's essentially unused. Bought it, installed it... didn't like it and removed it.  Been sitting ever since.  $20 plus shipping...

 :2vrolijk_21:  Thank you!!!

Okay, okay... NOW I am done!  Installed visor part number 69733-05

(http://i151.photobucket.com/albums/s144/wachuko/Motorcycles/RK%20CVO/A56E219B-03AE-477A-B953-553832AF038C_zpsy3fzipmu.jpg)

(http://i151.photobucket.com/albums/s144/wachuko/Motorcycles/RK%20CVO/03F53DB8-D28B-4BF0-8227-D4AA5AEC7423_zpsa7aokntd.jpg)

(http://i151.photobucket.com/albums/s144/wachuko/Motorcycles/RK%20CVO/F7F5CF6B-BE12-44CC-801B-BB877E7DE7F2_zpsmf6iemyl.jpg)

(http://i151.photobucket.com/albums/s144/wachuko/Motorcycles/RK%20CVO/ABE5EF8F-AB6F-4A60-A55A-FB0E60BC266A_zpshdgmxkn1.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on November 10, 2014, 07:33:43 PM

Okay, okay... NOW I am done!  Installed visor part number 69733-05


You don't honestly expect us to believe that do you ?? After all I'm fairly sure even you don't believe it  ;D
Title: Re: What did you do to or on your CVO today?
Post by: wachuko on November 10, 2014, 07:44:46 PM
You don't honestly expect us to believe that do you ?? After all I'm fairly sure even you don't believe it  ;D

I figured that if I repeat it enough I will start believing it...  :huepfenjump3:

I have the clear shields that I have to install on the saddlebag lids... Got those as part of the stuff I got when I purchased the bike
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on November 10, 2014, 08:11:57 PM
Changed the oil and filter, cleaned her up and winterized. Weather changing here this week.
Title: Re: What did you do to or on your CVO today?
Post by: 2 ROSE on November 10, 2014, 10:30:26 PM
Me and Rose went riding today. Sunny in the mid sixties...68 for the high with no rain tomorrow. Hoping for another good day or two before the end of the month...I will be shutting her down the first week in December.
Title: Re: What did you do to or on your CVO today?
Post by: LN Nation on November 11, 2014, 05:32:23 PM
I took my baby to Cookie's Tavern in Philadelphia to celebrate the Marine Corps birthday. It was her first time and I think she had a good time. They're so cute at this age.
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on November 11, 2014, 06:33:57 PM
I took my baby to Cookie's Tavern in Philadelphia to celebrate the Marine Corps birthday. It was her first time and I think she had a good time. They're so cute at this age.
I saw that on TV last night... might have seen you if you were there when the media was.

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: 2 ROSE on November 11, 2014, 08:08:34 PM
Happy belated birthday to the U.S. Marine Corps.
Title: Re: What did you do to or on your CVO today?
Post by: Grizzly on November 12, 2014, 01:41:16 AM
Temps here today in the low 60's

so I rode it

on a beautiful sunny day!

   :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: martys on November 12, 2014, 08:21:24 AM
Temps here today in the low 60's

so I rode it

on a beautiful sunny day!

   :2vrolijk_21:
Very rare November day here in Southern Ontario  :2vrolijk_21: I played 18 holes of golf in the morning and went for a 120km ride in the afternoon  :pepper: :pepper: :pepper:  Filled the tank and put some Staybill in, cause I think this really is the last ride till April  :(

Marty
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on November 12, 2014, 10:18:58 AM
Very rare November day here in Southern Ontario  :2vrolijk_21: I played 18 holes of golf in the morning and went for a 120km ride in the afternoon  :pepper: :pepper: :pepper:  Filled the tank and put some Staybill in, cause I think this really is the last ride till April  :(

Marty

Sounds like you had some great weather, putting the bike up for the season is truly a sad day.
Title: Re: What did you do to or on your CVO today?
Post by: Grizzly on November 12, 2014, 12:10:57 PM
Very rare November day here in Southern Ontario  :2vrolijk_21: I played 18 holes of golf in the morning and went for a 120km ride in the afternoon  :pepper: :pepper: :pepper:  Filled the tank and put some Staybill in, cause I think this really is the last ride till April  :(

Marty

It appears that retirement is agreeing with you!

Enjoy!
Title: Re: What did you do to or on your CVO today?
Post by: geezerglide on November 12, 2014, 01:04:12 PM
Very rare November day here in Southern Ontario  :2vrolijk_21: I played 18 holes of golf in the morning and went for a 120km ride in the afternoon  :pepper: :pepper: :pepper:  Filled the tank and put some Staybill in, cause I think this really is the last ride till April  :(

Marty

Marty,

I guess the weather is going to or has already changed for you in Ontario. In Calgary over the weekend we had apprx. 12 CMs of snow and right now the temperature is -16 C or 3 deg  F. and tonight it will be low - -21 with or -6 F with a wind chill factor of -29 C. By this weekend it will warm up to a high of -2 C and a low of -11.  However all is well as I rode my bike to Phoenix in September and I will be down for a short stay from Nov. 24 - Nov. 29th. In between I will be up in Fort MacMurray next week, oh the joy.

geezerglide
Title: Re: What did you do to or on your CVO today?
Post by: martys on November 12, 2014, 01:12:04 PM
It appears that retirement is agreeing with you!

Enjoy!
I highly recommend it  :huepfenlol2: :huepfenlol2:
Title: Re: What did you do to or on your CVO today?
Post by: martys on November 12, 2014, 01:13:22 PM
Sounds like you had some great weather, putting the bike up for the season is truly a sad day.
I'm already looking forward to Spring  ;) :drink:
Title: Re: What did you do to or on your CVO today?
Post by: martys on November 12, 2014, 01:15:46 PM
Marty,

I guess the weather is going to or has already changed for you in Ontario. In Calgary over the weekend we had apprx. 12 CMs of snow and right now the temperature is -16 C or 3 deg  F. and tonight it will be low - -21 with or -6 F with a wind chill factor of -29 C. By this weekend it will warm up to a high of -2 C and a low of -11.  However all is well as I rode my bike to Phoenix in September and I will be down for a short stay from Nov. 24 - Nov. 29th. In between I will be up in Fort MacMurray next week, oh the joy.

geezerglide
It's on its way here too Geezer  :(  Enjoy your time in Phoenix  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: TXGator on November 13, 2014, 05:43:38 PM
It's on its way here too Geezer  :(  Enjoy your time in Phoenix  :2vrolijk_21:
So does that mean you won't be riding?
Title: Re: What did you do to or on your CVO today?
Post by: grandpadoc on November 14, 2014, 10:34:09 AM
Led a Mission yesterday for a fallen Vet.
Title: Re: What did you do to or on your CVO today?
Post by: Bromebe on November 14, 2014, 10:58:32 AM
Dropped off all the new parts to have the fire damage repaired and finished

Got a new name for her thou

the "Flash"!
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on November 14, 2014, 12:23:17 PM
It was a lonely ride in as I was the only bike out this morning heading into work....don't know why nobody was willing/to stupid to get out with me in 20 degree weather and ride.  Even my neighbor up the holler that rides the BMW (and passes me about everyday....and waves) didn't even ride in today.  I mean, come on....It's not like it was snowing or anything.  I guess you just can't understand folks sometimes....  :apple: ;D ::) :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Mandrew13 on November 14, 2014, 01:39:12 PM
Dropped off all the new parts to have the fire damage repaired and finished

Got a new name for her thou

the "Flash"!

Haha...  Or go with the Fantastic Four's Torch- Flame On!

Glad the damage wasn't more serious and that you're ok.
Title: Re: What did you do to or on your CVO today?
Post by: willyB on November 14, 2014, 06:20:08 PM
Led a Mission yesterday for a fallen Vet.
:2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on November 14, 2014, 07:08:18 PM
Led a Mission yesterday for a fallen Vet.






Thanks for doing it Doc, I try to make as many as I can; glad to do it for the families.   :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on November 14, 2014, 08:24:04 PM
It was a lonely ride in as I was the only bike out this morning heading into work....don't know why nobody was willing/to stupid to get out with me in 20 degree weather and ride.  Even my neighbor up the holler that rides the BMW (and passes me about everyday....and waves) didn't even ride in today.  I mean, come on....It's not like it was snowing or anything.  I guess you just can't understand folks sometimes....  :apple: ;D ::) :2vrolijk_21:

I know a forum member who rode into SMHD to have the 1K service done on his 15 SERGU this morning....
Title: Re: What did you do to or on your CVO today?
Post by: cambo on November 14, 2014, 09:27:41 PM
Led a Mission yesterday for a fallen Vet.

 :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on November 15, 2014, 10:46:56 AM
I know a forum member who rode into SMHD to have the 1K service done on his 15 SERGU this morning....
And again today. Heated grips definitely work but it would be nice it they turned off when you want them to. Hopefully just a bad switch.
Title: Re: What did you do to or on your CVO today?
Post by: Billy on November 15, 2014, 05:42:40 PM
Wife and Road today about 30 degrees .  only 75 miles but sure feels good and the engine love the cold to. Heated gear was great. Sure makes owning a bike well worth it . we get 3 extra months a year  plus going over mountains and night riding is great. Billy
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on November 15, 2014, 08:13:25 PM
And again today. Heated grips definitely work but it would be nice it they turned off when you want them to. Hopefully just a bad switch.

So they do not turn off?  That could get hot.  Do they have a new one on order for you?
Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on November 15, 2014, 08:32:11 PM
So they do not turn off?  That could get hot.  Do they have a new one on order for you?
The control on the left doesn't turn them off most times once they have been turned on. As long as I don't turn them on starting out in the morning they stay off. Sounds like the left grip with the controller needs to be replaced. SMHD is going to call the MoCo Monday to get the ok to replace it.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on November 15, 2014, 09:01:16 PM
Ok.  That makes sense.  Good it does not come on, if you did not have it on when you start the bike.  I have heard some seats are doing that too.
Title: Re: What did you do to or on your CVO today?
Post by: DesertHOG on November 15, 2014, 09:10:41 PM
The control on the left doesn't turn them off most times once they have been turned on. As long as I don't turn them on starting out in the morning they stay off. Sounds like the left grip with the controller needs to be replaced. SMHD is going to call the MoCo Monday to get the ok to replace it.

I find that on my heater control the palm rubs against the control and inadvertently moves it to 1 or 2 setting. They remain warm even when turned to 0. The control is much looser than the heated grip on my '11.

Simon
Title: Re: What did you do to or on your CVO today?
Post by: Puma on November 16, 2014, 08:30:41 AM
Ordered more parts...
Wards fans in granite
Fuel Moto ceramic 2-1-2 headpipe with full size crossover
Jackpot dyno tuned 4 inch mufflers
Tw-555 cams

A couple weeks ago:
Picked up a heated Mustang seat from a forum member
Sent heads and jugs to be worked (soon to be 113)Not too many on this forum run the Fuel Moto. I think I'm going that way. Let us know what you think.

I'm thinking I have a fun weekend coming up soon. :bananarock:
Title: Re: What did you do to or on your CVO today?
Post by: Puma on November 16, 2014, 08:34:16 AM
Ordered more parts...
Wards fans in granite
Fuel Moto ceramic 2-1-2 headpipe with full size crossover
Jackpot dyno tuned 4 inch mufflers
Tw-555 cams

A couple weeks ago:
Picked up a heated Mustang seat from a forum member
Sent heads and jugs to be worked (soon to be 113)

I'm thinking I have a fun weekend coming up soon. :bananarock:
Not too many on here run the Fuel Moto. I think I'm going that way. Let us know what you think.
Title: Re: What did you do to or on your CVO today?
Post by: baddyna96 on November 16, 2014, 01:44:47 PM
Flashed the ECM with the V&H FP3 today. Now if it weren't snowing and 28 degrees out, I'd take it for a test ride.
Title: Re: What did you do to or on your CVO today?
Post by: wachuko on November 16, 2014, 01:46:59 PM
Finalized routing the wires for the rear saddlebag spoiler lights... done, finito...
Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on November 16, 2014, 01:54:58 PM
Not too many on here run the Fuel Moto. I think I'm going that way. Let us know what you think.
I run the Jackpot Fuel Moto on my 2012 CVO RG Custom with some basic engine work. They work well. 124HP 129TQ
Title: Re: What did you do to or on your CVO today?
Post by: wachuko on November 16, 2014, 02:16:22 PM
Not too many on here run the Fuel Moto. I think I'm going that way. Let us know what you think.

FuelMoto headpipe here as well... with FullSac 2" inserts and PowerVision tuner.
Title: Re: What did you do to or on your CVO today?
Post by: cmcarr88 on November 16, 2014, 06:08:57 PM
surprised the poopoo out of a guy on a Hayabusa .....  :P
Title: Re: What did you do to or on your CVO today?
Post by: CultusRider on November 16, 2014, 09:00:52 PM
Cleaned up all of the electrical wiring on my 2015 Fltruse for the KTP detach kit and added a second set of Deutsche connectors under the seat to makes things neat and tidy for both 2 up and solo riding. Just need to add some Painless loom wrap to finish things off and a few tie straps. Slid the pak back an inch while I was at it so momma has a little more reclining space. (http://tapatalk.imageshack.com/v2/360x360q90/14/11/16/90c6bec64aa3c998964296de38f90844.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: Supershooter on November 16, 2014, 09:43:50 PM
I had to move my SEUC across the shop so I could get the four wheeler in so I could mount a blade on the four wheeler to push snow. I it's time to give the bikes their end of the year wash and wax.
Supershooter
Title: Re: What did you do to or on your CVO today?
Post by: DesertHOG on November 16, 2014, 10:41:21 PM
Parked the 15 FLTRUSE out on the driveway for a bit while I was cleaning up the garage. Making more walk around/work around room. Getting rid of old chit that's been out there for over a decade. Going to take out half of my wall length wood work bench and make room for TourPak, Sissy Bar and Saddlebag Hangars along the wall. Will also make room for some of my stackable shelving to hold seats, helmets and takeoff parts.

Was a bit chilly today at 38oF. Won't get up to 55oF until this coming Wednesday.

DH
Title: Re: What did you do to or on your CVO today?
Post by: 2 ROSE on November 16, 2014, 11:12:48 PM
Decided 49°F and drizzle wasn't all that bad and took Miss Debbie out to the local tavern for hot wings and football, then over to one of her favorite clothing stores and by our local H-D dealer where we succeeded in adding a few things to her wardrobe.  For some strange reason I've always enjoyed riding on the days when weather isn't "ideal" and thankfully, Miss Debbie just loves to be on the bike!

Shes Hot...and you Scoot ain't bad either...   :)
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on November 17, 2014, 10:16:35 AM
Walked by the bike several times this weekend, she's covered up and hibernating. We have had some cold temps here, salt on the road, snowed yesterday.  Too early for that stuff here.
Title: Re: What did you do to or on your CVO today?
Post by: DCC on November 17, 2014, 01:17:00 PM
Put the CVO to bed for the winter with a fresh oil, tranny, and primary change along with a good detailing.  Still got two more bikes to do that to. Hoping for a warm up here, but it ain't looking good. :'(
Title: Re: What did you do to or on your CVO today?
Post by: DesertHOG on November 17, 2014, 07:42:45 PM
Ordered Custom Dynamics lighting upgrades for my '15 FLTRUSE

GEN-200-AW-1157 - Dynamic Ringz™  Bullet Style Turn Signal LED Inserts
 (BCM Compliant)

GEN-200-R-1156 - Bullet Style Turn Signal LED Inserts Red 1156/single intensity
 (BCM Compliant)

MAGIC-STROBES-LTP -HD LED Tour Pak GEN2 Magic Brake Light Flasher

GEN-SMARTTPUBCM - BCM SMART Triple Play

After I install all of this you should see me a mile down the highway either direction :D

DH
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on November 17, 2014, 08:40:45 PM
Ordered Custom Dynamics lighting upgrades for my '15 FLTRUSE

GEN-200-AW-1157 - Dynamic Ringz™  Bullet Style Turn Signal LED Inserts
 (BCM Compliant)

GEN-200-R-1156 - Bullet Style Turn Signal LED Inserts Red 1156/single intensity
 (BCM Compliant)

MAGIC-STROBES-LTP -HD LED Tour Pak GEN2 Magic Brake Light Flasher

GEN-SMARTTPUBCM - BCM SMART Triple Play

After I install all of this you should see me a mile down the highway either direction :D

DH

Good order there.  An easy install also.  I love the additional visibility it provides.

Have not seen my bike in 14 day's   :(  off shore working. 8 more Days and I will be riding it to FL for Thanksgiving!  :coolblue:
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on November 18, 2014, 07:17:25 AM
Enjoy riding down here.   Northern florida was in the 30s this morning.  Brrrrrrr........ :nervous:
Title: Re: What did you do to or on your CVO today?
Post by: SmokeyJoe on November 18, 2014, 07:46:10 AM
Enjoy riding down here.   Northern flash was in the 30s this morning.  Brrrrrrr........ :nervous:

30's is cold, were still in the 40's here.  I intend to ride untilt he first salting.
Title: Re: What did you do to or on your CVO today?
Post by: DesertHOG on November 18, 2014, 08:32:51 AM
30's is cold, were still in the 40's here.  I intend to ride untilt he first salting.

 :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: TXGator on November 18, 2014, 06:46:36 PM
Shorty CB and radio antennas..  Cheapest thing I have done to her yet..  Would have went with the hidden antennas but heard bad things about the reception.  They do look a bit better and I think they will be a little better going into the toy hauler...
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on November 18, 2014, 07:05:02 PM
30's is cold, were still in the 40's here.  I intend to ride untilt he first salting.

Already happened here.......I'm done until spring  :(
Title: Re: What did you do to or on your CVO today?
Post by: DesertHOG on November 18, 2014, 07:55:30 PM
Installed the 19" Tall Road Glide Windshield. I am hoping this makes a big difference for me with regard to wind in the face/helmet and helmet noise. I will report back after I get a ride in this weekend. I thought it might end up being too tall but I can see over the windshield just fine.

HD Part# 57400279 CLEAR 19" WINDSHIELD

DH
Title: Re: What did you do to or on your CVO today?
Post by: Fireguy on November 18, 2014, 09:48:34 PM
Shorty CB and radio antennas..  Cheapest thing I have done to her yet..  Would have went with the hidden antennas but heard bad things about the reception.  They do look a bit better and I think they will be a little better going into the toy hauler...
The reception will be a little less as far as distance goes but definitely better than the hidden antenna.
Title: Re: What did you do to or on your CVO today?
Post by: Supershooter on November 18, 2014, 10:36:13 PM
The reception will be a little less as far as distance goes but definitely better than the hidden antenna.
I replaced my shorties with the stock antenna because reception was so poor when I live. Local stations are 30-70 miles away, and I could only get the 30 mile away stations sometimes.
Supershooter
Title: Re: What did you do to or on your CVO today?
Post by: Puma on November 19, 2014, 08:06:03 AM
30's is cold, were still in the 40's here.  I intend to ride untilt he first salting.
I'm thinking about getting a Fuel Moto exhaust in the spring. Jackpot pipe and mufflers. Are you still running the FM? Any thing you can tell me about it would be appreciated.
Title: Re: What did you do to or on your CVO today?
Post by: SmokeyJoe on November 19, 2014, 08:16:33 AM
I'm thinking about getting a Fuel Moto exhaust in the spring. Jackpot pipe and mufflers. Are you still running the FM? Any thing you can tell me about it would be appreciated.

I do have the FuelMoto stainles ceramic coated header.  I like the sound of this header.  I do not care for the way the heat shield line up.  they are a major pain in the rearend.  What I did was put a couple of extra hose clamps under the two forward shields.  This pushed them out some so there was no gap between the two and the rear shield.  I tried so many times to line it up, this was my solution and it has not presented a problem.  I love my FM Touring mufflers with the carbon fiber ring.  They look good and sound great, not too loud and not quiet either.  When you let off the gas they sound like a jackhammer,. love it. 
I had the FuelSac with 2" cores as well.  The fit was perfect and in hind sight I really liked the sound.  I also feel (feel) they had a bit more power.  Not sure if it was the hardware or the tune.  Back then I had the TTS Tuner, today I have the Power Vision. 
Personally I feel either way you will be happy.
If I could do it all over again, I would go with the FullSac gear and their tune.
Title: Re: What did you do to or on your CVO today?
Post by: Puma on November 19, 2014, 08:28:53 AM
I do have the FuelMoto stainles ceramic coated header.  I like the sound of this header.  I do not care for the way the heat shield line up.  they are a major pain in the rearend.  What I did was put a couple of extra hose clamps under the two forward shields.  This pushed them out some so there was no gap between the two and the rear shield.  I tried so many times to line it up, this was my solution and it has not presented a problem.  I love my FM Touring mufflers with the carbon fiber ring.  They look good and sound great, not too loud and not quiet either.  When you let off the gas they sound like a jackhammer,. love it. 
I had the FuelSac with 2" cores as well.  The fit was perfect and in hind sight I really liked the sound.  I also feel (feel) they had a bit more power.  Not sure if it was the hardware or the tune.  Back then I had the TTS Tuner, today I have the Power Vision. 
Personally I feel either way you will be happy.
If I could do it all over again, I would go with the FullSac gear and their tune.
Thanks for the advice. I've narrowed it down to those two. Fullsac is coming out with a Stainless version soon. I'm just a little concerned about replacing the guts in the stock mufflers. I haven't found anyone around here who's done it and I gave up doing my own work years ago.
Title: Re: What did you do to or on your CVO today?
Post by: knothead on November 19, 2014, 08:16:25 PM
Loaded it on a trailer with a trashed engine after 55,000 mies...
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on November 19, 2014, 08:29:34 PM
Loaded it on a trailer with a trashed engine after 55,000 mies...

Sorry to hear that. 
Title: Re: What did you do to or on your CVO today?
Post by: wachuko on November 20, 2014, 11:14:00 AM
Loaded it on a trailer with a trashed engine after 55,000 mies...

 :'( Say what!!??

Title: Re: What did you do to or on your CVO today?
Post by: 2 ROSE on November 20, 2014, 09:36:11 PM
Loaded it on a trailer with a trashed engine after 55,000 mies...

Hey knothead,
I know you are having it trailered to have a new v-twin installed...right? I hope....
Title: Re: What did you do to or on your CVO today?
Post by: DesertHOG on November 21, 2014, 11:02:29 AM
Alright, as promised a report on the new 19" windshield for my 15 FLTRUSE.

BIG IMPROVEMENT over the stock 14" Windshield. It isn't perfect, still some buffetting from the sides but at least 150-200% better. I don't feel my head being whipped around anymore and the helmet windscreen noise is way down.

Worth the money and done waiting for the aftermarket guys to come up with a tall shield.

Simon
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on November 21, 2014, 12:46:25 PM
Alright, as promised a report on the new 19" windshield for my 15 FLTRUSE.

BIG IMPROVEMENT over the stock 14" Windshield. It isn't perfect, still some buffetting from the sides but at least 150-200% better. I don't feel my head being whipped around anymore and the helmet windscreen noise is way down.

Worth the money and done waiting for the aftermarket guys to come up with a tall shield.

Simon

How's it look on the bike, Simon? 
Title: Re: What did you do to or on your CVO today?
Post by: DesertHOG on November 21, 2014, 03:44:33 PM
Haird

Here are 3 pics (a little dark) .. 1 before, 2 after. You can figure the distant in height change by looking at the mirrors relative to windshield.

(https://mail.google.com/mail/u/0/?ui=2&ik=4d0b21c0ae&view=fimg&th=149d41135f3cfc4d&attid=0.1&disp=inline&realattid=1485414988830998528-local0&safe=1&attbid=ANGjdJ8ArWhgLXGsKPjzVwJZOj3UcwUZjlTM9QdlptDjvzoBjAVmkGr31rkRzyofSLLqV0YDL9dpEggQhsKngLF28lo-LEJUwJx7X3hcfYkrp8LYOM0g6V-3ijt_NX8&ats=1416602916729&rm=149d41135f3cfc4d&zw&sz=w1650-h775)

(https://mail.google.com/mail/u/0/?ui=2&ik=4d0b21c0ae&view=fimg&th=149d4150d0f9e548&attid=0.1&disp=inline&realattid=1485415084438061056-local0&safe=1&attbid=ANGjdJ85JFbVCaTNjYHYJ5gyRNeDxHAk4GUCHJqpIkGFeofKV4H1tc1BXF0-jnyN9JTnRs7zgfCnCA6zaTUi0432-X6xS0vtRAPTV4t3turc1snw5ECuc_y8gYd9bUI&ats=1416602916713&rm=149d4150d0f9e548&zw&sz=w1650-h775)

(http://i743.photobucket.com/albums/xx76/DesertHOG/2015_CVO_UltraRoadGlide/DeliveryDay-5_zpsf680976c.jpg) (http://s743.photobucket.com/user/DesertHOG/media/2015_CVO_UltraRoadGlide/DeliveryDay-5_zpsf680976c.jpg.html)

More or less the same :D


DH
Title: Re: What did you do to or on your CVO today?
Post by: wachuko on November 21, 2014, 08:11:19 PM
PowerVision installed and new map loaded!!  Reusing my old PV and just got a license and a new cable that would match the 6-pin connection in the newer bikes.

(http://i151.photobucket.com/albums/s144/wachuko/Motorcycles/RK%20CVO/E66B0161-0C58-4B8C-BBD3-FC6CB4352E33_zpsbielvfsp.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: knothead on November 22, 2014, 06:57:08 PM
Removed rear turn signals, license plate bracket, luggage rack Installed progressive 440 shocks that lowered it 4 ", new brake light with turn signal built in and lower license plate bracked.
Title: Re: What did you do to or on your CVO today?
Post by: cmashark on November 23, 2014, 01:16:54 PM
Removed rear turn signals, license plate bracket, luggage rack Installed progressive 440 shocks that lowered it 4 ", new brake light with turn signal built in and lower license plate bracked.

Nice!  I have times that I miss my Vrods.  Bulletproof engine. Stroke it and put some cams in it and that thing will move.
Title: Re: What did you do to or on your CVO today?
Post by: Puma on November 23, 2014, 02:32:23 PM
Rode it!  :bananarock:
Title: Re: What did you do to or on your CVO today?
Post by: Digital on November 23, 2014, 04:40:24 PM
Ordered a J&S Lift!   Looking forward to jacking it up.
Title: Re: What did you do to or on your CVO today?
Post by: Mano on November 23, 2014, 07:35:02 PM
Seafoam in the gas tank. Filled it up with gas. Air in the tires and washed her. Then put the trickle charger on. :(
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on November 23, 2014, 07:39:44 PM
Removed rear turn signals, license plate bracket, luggage rack Installed progressive 440 shocks that lowered it 4 ", new brake light with turn signal built in and lower license plate bracked.

Looks great!
Title: Re: What did you do to or on your CVO today?
Post by: 2 ROSE on November 24, 2014, 12:35:52 AM
Seafoam in the gas tank. Filled it up with gas. Air in the tires and washed her. Then put the trickle charger on. :(

Sorry for the dumb question...but what is Seafoam and why is it in your gas tank?
Title: Re: What did you do to or on your CVO today?
Post by: 2 ROSE on November 24, 2014, 01:13:58 AM
Gonna go riding today. Its suppose to be sunny with the high temp in the low sixties.
Title: Re: What did you do to or on your CVO today?
Post by: PinkE on November 24, 2014, 07:20:10 AM
My trike is in the shop, My sweetie Randy (DaBigNuttedMan) is getting my inner fairing painted to match my bike, also sent my CD/Radio to get fixed or swapped at Radio Sound for me...I'm getting anxious to see it, 'Fabeo' has never been away from home this long, hoping to get it back this week, I'll post pictures when I do..... :2vrolijk_20:
Title: Re: What did you do to or on your CVO today?
Post by: porthole on November 24, 2014, 12:46:40 PM
Sorry for the dumb question...but what is Seafoam and why is it in your gas tank?

Just one of many fuel additives.
http://seafoamsales.com/

Gets high regards in the marine and small engine industry.

Title: Re: What did you do to or on your CVO today?
Post by: HUBBARD on November 24, 2014, 01:47:27 PM
Just ordered me a can of that.  8) Later--HUBBARD
Title: Re: What did you do to or on your CVO today?
Post by: Mano on November 24, 2014, 04:25:49 PM
Sorry for the dumb question...but what is Seafoam and why is it in your gas tank?

Thanks for answering porthole and FXD_TG.

I have been using this product for over 26 years. Back in the day it was not sold up here. I would go to Pittsburgh for Steelers games and would bring it back across the boarder. It is now sold here but still save between 3 and 4 dollars a can if I buy it across the boarder.

I have 2 other bikes in Europe and I always pour the whole can in the tank to prevent the gas breaking down. So far so good. I go there once a year so it will last the year for sure. I have also went 2 years without gas breaking down. Awesome stuff. :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: baddyna96 on November 24, 2014, 07:42:20 PM
Just ordered a Long Ride windshield for mine. 60% off right now on their web sight.





Title: Re: What did you do to or on your CVO today?
Post by: J.Mart60 on November 25, 2014, 01:42:49 AM
Just put Vance and Hines True Duals and Twin Slash Ovals on the CUSE3, sounds awesome!
Title: Re: What did you do to or on your CVO today?
Post by: kiro on November 25, 2014, 10:02:09 PM
We had an unusually warm day today with snow due tomorrow. Hated doing it, but shuttled both bikes in for winter storage while I could still ride them.
Title: Re: What did you do to or on your CVO today?
Post by: rheiner on November 26, 2014, 11:49:22 PM
Over the past week or so on my 2010 SEUC I removed the drive components then removed the mainshaft sprocket, the bearing inner race on the mainshaft, the small oil seal behind the race, and the large oil seal surrounding the main gear. I installed a new large oil seal, small oil seal, and bearing race. I installed a new oil seal and retaining ring on the shifter pawl shaft. I removed the oil seal on the inner primary housing and pressed out the bearing and installed a new bearing by pressing it in and I installed a new inner primary oil seal. I pressed out the bearing from the clutch release plate and pressed in a new one and installed a new retaining ring to hold the push rod in place. I cleaned the clutch basket and installed a Barnett Extra Plate Clutch Kit - Carbon Fiber 307-30-20013. I used the OEM damper spring seat and damper spring. I installed a new stator because it was leaking chaincase oil out of the bore of the crankcase.

I recommend using a Lisle 58430 shaft type seal puller. It made pulling the seals behind the race and sprocket a breeze compared to the tough time I had getting the nut off the sprocket and the inner bearing race pulled. I had to heat the race til it turned blue in color before it finally broke free using the recommended 50 ft. pounds of torque so the remover tool doesn't get damaged.
Title: Re: What did you do to or on your CVO today?
Post by: rheiner on November 26, 2014, 11:50:15 PM
another of the new race and seals installed.
Title: Re: What did you do to or on your CVO today?
Post by: FLHTCUSE7 on November 29, 2014, 10:50:11 AM
Rode to a open house at a local HD dealer. (ABC) to my surprise I was the only one that rode the bike there, everyone else was in a car.  :nixweiss:

It was 28 degrees F and sunny so it was a nice ride. Took me a half hour or so to get there.

Title: Re: What did you do to or on your CVO today?
Post by: DesertHOG on November 29, 2014, 12:31:35 PM
Rode to a open house at a local HD dealer. (ABC) to my surprise I was the only one that rode the bike there, everyone else was in a car.  :nixweiss:

It was 28 degrees F and sunny so it was a nice ride. Took me a half hour or so to get there.

 :2vrolijk_21: :2vrolijk_21:
2 Thumbs Up
Title: Re: What did you do to or on your CVO today?
Post by: dayne66 on November 29, 2014, 12:36:56 PM
Not 'to' or 'on'....but, 'for'............painted their room.....primed the cupboards.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on November 29, 2014, 04:57:25 PM
Rode it to the dealer to drop it off to get the iPod cable replaced under the ESP (and whatever else they can find that will be covered) and don't plan on bringing it back home. New one is on the truck :2vrolijk_21: Dealer is picking up the deductible for the repair.
Title: Re: What did you do to or on your CVO today?
Post by: Ohio phil on November 29, 2014, 05:06:48 PM
Cool man can't wait to see pic's
Title: Re: What did you do to or on your CVO today?
Post by: 2 ROSE on November 29, 2014, 11:27:29 PM
Rode to a open house at a local HD dealer. (ABC) to my surprise I was the only one that rode the bike there, everyone else was in a car.  :nixweiss:

It was 28 degrees F and sunny so it was a nice ride. Took me a half hour or so to get there.


Damn Rotarywing,
You are da man.  I will tell anyone who is reading this post...THERE IS NOT ENOUGH HEAT GENERATED IN THAT 110 V-TWIN FOR ME AND ROSE TO EVER BE OUT RIDING IN 28° TEMPERATURE...I DON'T CARE HOW DAMN SUNNY IT IS.
Rotarywing,
Stay Safe and Warm!!!
Title: Re: What did you do to or on your CVO today?
Post by: luc.who on November 30, 2014, 07:22:31 AM
megs ultimate wax, redline in the tranny, primary and mobile 1 in the crank.  Thinking about the replacing the head pipes and a tune. 
Title: Re: What did you do to or on your CVO today?
Post by: FLHTCUSE7 on November 30, 2014, 08:47:09 AM
Gerbing heated gear helps a lot. I was warm and toasty.



Damn Rotarywing,
You are da man.  I will tell anyone who is reading this post...THERE IS NOT ENOUGH HEAT GENERATED IN THAT 110 V-TWIN FOR ME AND ROSE TO EVER BE OUT RIDING IN 28° TEMPERATURE...I DON'T CARE HOW DAMN SUNNY IT IS.
Rotarywing,
Stay Safe and Warm!!!
Title: Re: What did you do to or on your CVO today?
Post by: willyB on November 30, 2014, 09:10:32 AM
I took my new Screamin Eagle emblem out for a little ride.

It was great to get the machine out even if it was just for a few hours.
Title: Re: What did you do to or on your CVO today?
Post by: cmashark on November 30, 2014, 08:18:47 PM
Massaged the Ventilator air cleaner to work with the SE 58mm TBW intake.
Title: Re: What did you do to or on your CVO today?
Post by: cmashark on November 30, 2014, 08:20:17 PM
Stole this idea from a member on another forum.  Re-routing crankcase venting. The rear vent has to be positioned this way to clear the TB.

Tomorrow, the 113 assembly begins... Yep, no sleep for me tonight.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on December 01, 2014, 08:08:44 AM
Well rode mine to FL Wednesday for Thanksgiving at my Daughters in Pensacola, then Friday we rode to Panama City Beach, then Saturday down to ST George Island.  Then Sunday we road back home to East TN.  Saw lows of 37 and highs of 70 during our rides.  Perfect weather no rain.
Title: Re: What did you do to or on your CVO today?
Post by: wachuko on December 01, 2014, 09:40:22 AM
Put a few miles (100) on it... nothing like what FLSTFI Dave did!!  ;) ... and yes, nice weather in FL this weekend with temps all over the place but no rain.

With the help of a friend, finally adjusted the highway pegs.  The are now perfectly situated for me.

Got some thermal clothing on special from Cycle Gear for the trip to Key West (the ride there in Jan can be extremely cold for us Floridians  :P )
Title: Re: What did you do to or on your CVO today?
Post by: Kosmic Ken on December 01, 2014, 11:42:36 AM
This past Saturday I took delivery of: 1. Detachable Tour-Pak Conversion Kit 2. Hand Adjustable Touring Shocks 3. Screamin' Eagle High Flow Exhaust system with Nightstick Mufflers. All for my 2014 CVO Limited.
You would think a CVO would come with the best shocks and exhaust system but no - CVO's need upgrades too!
After the exhaust system is installed I plan to have the bike dyno'd using the SE Pro Super Tuner. I so look forward to riding on a casual basis without that 45 lbs. of tour pack up there behind me. With these new shocks replacing the air ones I expect even more improved handling.
Even without all these changes this CVO is one great bike!  :apple: :pepper:
Title: Re: What did you do to or on your CVO today?
Post by: Kosmic Ken on December 01, 2014, 11:59:24 AM
The reception will be a little less as far as distance goes but definitely better than the hidden antenna.
The hidden antenna has worked very well for me. After removing the CB antenna as well the rear of the bike looks so much cleaner with no antennas. Since I seldom have the radio or any other sound on the hidden antenna will do everything I need.
Title: Re: What did you do to or on your CVO today?
Post by: 2 ROSE on December 01, 2014, 12:54:05 PM
Its a sad day...just dropped Rose off at the dealer for winter storage today. :(
Will not pick her up until April 1, 2015. Seems such a long time. The dealer is very understanding however...they said I can visit her anytime I want...that helped.
I am already experiencing separation anxiety.
Its going to be a looooooong winter.
 :( :( :(
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on December 01, 2014, 01:34:38 PM
You would think a CVO would come with the best shocks and exhaust system but no - CVO's need upgrades too!

Ken, you said a mouthful there, brother!

I will nominate this one for Quote of the day.....short, to the point and so true....
Title: Re: What did you do to or on your CVO today?
Post by: owl893 on December 01, 2014, 03:38:53 PM
Modifications are like eating hot cheese dip. You know you don't Need it, but you want it, you know it will burn your mouth, but the more you eat the more you want. When you are done, it feels good, but you see that bowl across the room and the bag of nacho chips and you just can't help yourself, you go back again. What is wrong with us?

I just placed an order with Kuryakyn, I need a twelve step program for chromeaholics.

OWL
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on December 01, 2014, 03:57:26 PM
Modifications are like eating hot cheese dip. You know you don't Need it, but you want it, you know it will burn your mouth, but the more you eat the more you want. When you are done, it feels good, but you see that bowl across the room and the bag of nacho chips and you just can't help yourself, you go back again. What is wrong with us?

I just placed an order with Kuryakyn, I need a twelve step program for chromeaholics.

OWL
I hear what you are saying, looking at other chrome options for my ride. 
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on December 01, 2014, 06:46:30 PM
Modifications are like eating hot cheese dip. You know you don't Need it, but you want it, you know it will burn your mouth, but the more you eat the more you want. When you are done, it feels good, but you see that bowl across the room and the bag of nacho chips and you just can't help yourself, you go back again. What is wrong with us?

I just placed an order with Kuryakyn, I need a twelve step program for chromeaholics.

OWL

It's not a problem until you run out of things to chrome on your bike, decide custom paint is the way to go, finish that.....Want more power so you modify the engine(with what else? Chromoly parts) and drivetrain, finish that .....and then you go out and buy another bike... you buy more chrome....now you have two bikes full of chrome and other mods....and you  begin looking for the next bike......

That's when you join a twelve step program, because after the third one you started drinking  ;D
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on December 02, 2014, 08:16:35 AM
This past Saturday I took delivery of: 1. Detachable Tour-Pak Conversion Kit 2. Hand Adjustable Touring Shocks 3. Screamin' Eagle High Flow Exhaust system with Nightstick Mufflers. All for my 2014 CVO Limited.
You would think a CVO would come with the best shocks and exhaust system but no - CVO's need upgrades too!
After the exhaust system is installed I plan to have the bike dyno'd using the SE Pro Super Tuner. I so look forward to riding on a casual basis without that 45 lbs. of tour pack up there behind me. With these new shocks replacing the air ones I expect even more improved handling.
Even without all these changes this CVO is one great bike!  :apple: :pepper:

Shocks will be a big upgrade in handling.  I hated the handling on my 15 CVO RGU, but with new Ohlin shocks it handles like a dream.


I have a thread in the Road Glide Ultra section on doing the conversion to quick detach, parts and pictures.  It's not using the HD Kit, cost a bit less, and the plate mounting looks much better.  You also do not need those big bag lights that come in the kit.
Title: Re: What did you do to or on your CVO today?
Post by: porthole on December 02, 2014, 09:31:33 AM
I hated the handling on my 15 CVO RGU, but with new Ohlin shocks it handles like a dream.


I thought you said this bike was great pretty much out of the box?
Title: Re: What did you do to or on your CVO today?
Post by: 2 ROSE on December 02, 2014, 09:45:07 AM
It's not a problem until you run out of things to chrome on your bike, decide custom paint is the way to go, finish that.....Want more power so you modify the engine(with what else? Chromoly parts) and drivetrain, finish that .....and then you go out and buy another bike... you buy more chrome....now you have two bikes full of chrome and other mods....and you  begin looking for the next bike......

That's when you join a twelve step program, because after the third one you started drinking  ;D

WAIT A MINUTE!!!  Ain't this the reason I bought a CVO...so I don't have to do all that stuff???  Didn't my dealer tell me I would not have to do anything else to the bike...it was already done for me??  I can't believe my dealer would tell me anything that isn't true therefore, all you guys with your chromed-out shiney bikes must have some kind of sickness...a mental disorder.

Hmmm...now where did I place my 2015 Genuine Motor Parts and Accessories book at....
Title: Re: What did you do to or on your CVO today?
Post by: owl893 on December 02, 2014, 02:39:54 PM
it's right over there by the Orange Kool-Aid............we all drank a cup.

OWL
Title: Re: What did you do to or on your CVO today?
Post by: TXGator on December 02, 2014, 06:57:30 PM
Added the chrome fairing inlet cover..  Looks nice...
Title: Re: What did you do to or on your CVO today?
Post by: OBB on December 02, 2014, 06:58:06 PM
Traded  it in. My new one finally got here.
Title: Re: What did you do to or on your CVO today?
Post by: SBB on December 02, 2014, 07:01:46 PM
Traded  it in. My new one finally got here.


Time to change that picture to show a blue one.


SBB



Title: Re: What did you do to or on your CVO today?
Post by: Ohio phil on December 02, 2014, 07:04:10 PM
That's a nice looking ride Mike !!
Title: Re: What did you do to or on your CVO today?
Post by: panz on December 02, 2014, 07:08:45 PM
Ohiobellboy...you picked the right color!! Good looking
Bike...enjoy your new ride!
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on December 02, 2014, 07:17:38 PM
Traded  it in. My new one finally got here.


That's one Bluetiful bike  :2vrolijk_21:
Congrats!!!
Title: Re: What did you do to or on your CVO today?
Post by: 2 ROSE on December 02, 2014, 07:27:35 PM
Nice blue bike!!!
Title: Re: What did you do to or on your CVO today?
Post by: Puma on December 02, 2014, 09:27:41 PM
I didn't do anything to or on it, but I did do something FOR it. Ordered the new exhaust. It's getting the new Dragula 2 with 2.55 inch baffle.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on December 03, 2014, 05:43:20 AM
I thought you said this bike was great pretty much out of the box?
Other than the POS factory air shocks the bike is great out of the box.

Many like the air shocks.  I hated them. I could never set them were the bike felt planted in the corners.  The bake of the bike in hard corners felt like it was wallowing or mushy and loose.  Could be I was so use to 944's on my 09 CVO Road Glide, then the HD hand adjustable premium low profiles on the 12 CVO Road Glide and the 13 CVO Road King that these just did not fell right to me.  Once I put the Ohlins on it the back feels every bit a planted as my 12 SERG or 13 SERK, if not better. 
Title: Re: What did you do to or on your CVO today?
Post by: Ridgerunr on December 03, 2014, 08:13:15 AM
Dave, you have Ohlins on the new bike?
Title: Re: What did you do to or on your CVO today?
Post by: Puma on December 03, 2014, 08:20:11 AM
Other than the POS factory air shocks the bike is great out of the box.

Many like the air shocks.  I hated them. I could never set them were the bike felt planted in the corners.  The bake of the bike in hard corners felt like it was wallowing or mushy and loose.  Could be I was so use to 944's on my 09 CVO Road Glide, then the HD hand adjustable premium low profiles on the 12 CVO Road Glide and the 13 CVO Road King that these just did not fell right to me.  Once I put the Ohlins on it the back feels every bit a planted as my 12 SERG or 13 SERK, if not better.
I'm so ignorant I thought all CVO's got the HD Premium Shocks. I agree, the air shocks on standard touring rides don't cut it. I bet the Ohlins are sweet. My original plan was to get a Street Glide and upgrade to Race Tech, but I got a deal on a CVO Road King instead which was the bike I really wanted. Premium Ride shocks are fine.
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on December 03, 2014, 08:20:38 AM
Traded  it in. My new one finally got here.

It's a beauty, OBB. 
Title: Re: What did you do to or on your CVO today?
Post by: cmashark on December 03, 2014, 05:43:26 PM
Ordered a new crank from Steve at GMR.  Just couldn't talk myself into installing his 113 kit on my stock crank.  Oh well, the weather is to ride anyways.
Title: Re: What did you do to or on your CVO today?
Post by: Puma on December 03, 2014, 09:04:10 PM
Had my ghost pipe mounted with the stock crossover and it would move around and didn't line up well at all so ordered the hangar from Frank and installed today. Looks much better and a lot easier on my OCD!

(http://i1244.photobucket.com/albums/gg579/jswerve1974/2014-05-22115902_zps004553ca.jpg) (http://s1244.photobucket.com/user/jswerve1974/media/2014-05-22115902_zps004553ca.jpg.html)

(http://i1244.photobucket.com/albums/gg579/jswerve1974/2405c8d8-5137-4431-93c6-993ca67d0e3a_zps870b8027.jpg) (http://s1244.photobucket.com/user/jswerve1974/media/2405c8d8-5137-4431-93c6-993ca67d0e3a_zps870b8027.jpg.html)
It didn't come with the hanger?
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on December 04, 2014, 07:54:40 AM
Dave, you have Ohlins on the new bike?
Yes I have Ohlins on the new bike.  Hated the POS air shocks, had about 1800 miles or less on bike when I changed.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on December 04, 2014, 07:57:52 AM
I'm so ignorant I thought all CVO's got the HD Premium Shocks. I agree, the air shocks on standard touring rides don't cut it. I bet the Ohlins are sweet. My original plan was to get a Street Glide and upgrade to Race Tech, but I got a deal on a CVO Road King instead which was the bike I really wanted. Premium Ride shocks are fine.

On my 09 SERG I changed shocks as they were air.  My 12 SERG had the premium profile low hand adjustable, which were good enough I did not feel the need to spend more money on shocks.  That said, my Ohlins on the new bike are much better. 
Title: Re: What did you do to or on your CVO today?
Post by: kastout on December 05, 2014, 07:39:27 AM
New CFR SINGLE FLUTED MUFFLERS IN CHROME
Title: Re: What did you do to or on your CVO today?
Post by: TankSoFlo on December 05, 2014, 10:36:42 PM
Traded  it in. My new one finally got here.
Time to get a set of D&D Fatcats make it sound like a Semi!
Title: Re: What did you do to or on your CVO today?
Post by: OBB on December 06, 2014, 02:07:27 AM
Time to get a set of D&D Fatcats make it sound like a Semi!
Had a set on the '11 I traded in. Not going that route again. Great sound and power, just too loud for my ears on anything more than 30 minutes riding.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on December 06, 2014, 08:02:47 AM
Rode it to the dealer to drop it off to get the iPod cable replaced under the ESP (and whatever else they can find that will be covered) and don't plan on bringing it back home. New one is on the truck :2vrolijk_21: Dealer is picking up the deductible for the repair.
Well, on the old bike, dealer investigated a noise I told them about. One of the lifters was scored pretty good along with the cam, and the cam chain tensioner was starting to lose small chunks of plastic. Glad for the ESP. I will be buying it for the new bike as well. Oh, that cord for the iPod,,, $140  :'(
I didn't have to pay anything but the service manager said the cam job alone would have been roughly $1200 for a cash paying customer.
Title: Re: What did you do to or on your CVO today?
Post by: Puma on December 06, 2014, 09:04:46 AM
Well, on the old bike, dealer investigated a noise I told them about. One of the lifters was scored pretty good along with the cam, and the cam chain tensioner was starting to lose small chunks of plastic. Glad for the ESP. I will be buying it for the new bike as well. Oh, that cord for the iPod,,, $140  :'(
I didn't have to pay anything but the service manager said the cam job alone would have been roughly $1200 for a cash paying customer.
Was all that damage with stock cams?
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on December 06, 2014, 09:26:52 AM
Was all that damage with stock cams?
Sounds like the typical failed Harley Lifter.  Petty common on bikes that have miles on them.  My 09 SERG had a lifter fail with 44K on the bike.  Failed on the show room floor right after I traded the bike on my 12 SERG.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on December 06, 2014, 10:11:18 AM
Was all that damage with stock cams?
yup. As far as I know, the only thing that had been done to that bike enginewise was the D&D exhaust and the tuner. The old cams were stamped CVO 255
Title: Re: What did you do to or on your CVO today?
Post by: SBB on December 06, 2014, 10:48:29 AM
yup. As far as I know, the only thing that had been done to that bike enginewise was the D&D exhaust and the tuner. The old cams were stamped CVO 255


Great timing OBB



SBB
Title: Re: What did you do to or on your CVO today?
Post by: OBB on December 06, 2014, 10:54:32 AM

Great timing OBB



SBB

Yeah, woulda sucked to be halfway to anywhere and have it come apart. Good for the dealer. Makes for a better selling point that the cams and lifters where just refreshed. Not too mention the money they made on the repair. Service manager ( I've seen articles of him when he used to build engines in Fla) said they were probably good for another 10-15k miles. Hell with that. change them before they're totally gone.
Title: Re: What did you do to or on your CVO today?
Post by: FLHTCUSE7 on December 06, 2014, 03:08:12 PM
Rode out for lunch, no snow today but maybe some tomorrow  >:(
Title: Re: What did you do to or on your CVO today?
Post by: T-Roy on December 06, 2014, 03:44:34 PM
Installed some bullet screw covers and some windshield bullets.
Title: Re: What did you do to or on your CVO today?
Post by: T-Roy on December 06, 2014, 03:46:02 PM
More windshield bullets
Title: Re: What did you do to or on your CVO today?
Post by: T-Roy on December 06, 2014, 03:48:53 PM
Bullets go through the windshield
Title: Re: What did you do to or on your CVO today?
Post by: T-Roy on December 06, 2014, 03:50:05 PM
Bullet screw covers
Title: Re: What did you do to or on your CVO today?
Post by: T-Roy on December 06, 2014, 03:51:30 PM
more bullet screw covers
Title: Re: What did you do to or on your CVO today?
Post by: T-Roy on December 06, 2014, 03:52:46 PM
bullet screw covers
Title: Re: What did you do to or on your CVO today?
Post by: T-Roy on December 06, 2014, 03:53:59 PM
Last one
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on December 07, 2014, 10:57:36 AM
bullet screw covers
I like it, now you need the bullet shifter peg.
Title: Re: What did you do to or on your CVO today?
Post by: michaelokielee@yahoo.com on December 07, 2014, 11:55:57 AM
Those are awesome, never saw them before
Title: Re: What did you do to or on your CVO today?
Post by: T-Roy on December 07, 2014, 02:16:01 PM
I like it, now you need the bullet shifter peg.

Yep and the bullet belt shifter linkage.  >:(
Title: Re: What did you do to or on your CVO today?
Post by: denis on December 07, 2014, 05:52:05 PM
took bike out today for toys for tots about 38f out but dry
Title: Re: What did you do to or on your CVO today?
Post by: Born2Live on December 07, 2014, 05:53:53 PM
Spent $4.000 on mods for an early Xmas gift on the new CVO Street Glide.......it hurt so good


Sent from my iPad using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on December 08, 2014, 07:20:58 AM
Road about 250 miles yesterday on some great East TN twisty roads.  While doing so, I tested the Klock werks 14 Sport light tint wind shield on my CVO RG Ultra.  With the corbin solo which is about two inches lower than the stock seat it works pretty good for me.  If I was an inch taller, or with the stock seat it would not work.  I am 6'1".  Looks way better than stock.
Title: Re: What did you do to or on your CVO today?
Post by: Ridgerunr on December 08, 2014, 08:00:42 AM
Hey Dave, thanks for the report on the windshield. Mind snapping a picture or 2.
Title: Re: What did you do to or on your CVO today?
Post by: DesertHOG on December 08, 2014, 04:31:52 PM
Road about 250 miles yesterday on some great East TN twisty roads.  While doing so, I tested the Klock werks 14 Sport light tint wind shield on my CVO RG Ultra.  With the corbin solo which is about two inches lower than the stock seat it works pretty good for me.  If I was an inch taller, or with the stock seat it would not work.  I am 6'1".  Looks way better than stock.

Dave, this makes me believe I made the right decision in getting the HD 19" Windshield. I am 6'4" with a 32" inseam. Using the high stock seats, I can already tell from your descripition that I would not be happy with the Klockwerks solution just because it's only 14" tall. The 19" HD is way better than the stock for me and I am still looking over the windshield.

DH
Title: Re: What did you do to or on your CVO today?
Post by: OBB on December 08, 2014, 05:17:12 PM
 Bought a bunch of goodies for it. :)
Title: Re: What did you do to or on your CVO today?
Post by: Billy on December 08, 2014, 07:48:35 PM
My wife and I rode about 100 miles Sunday around Lake Geneva Wi it was about 34 out but we stayed warm thanks to Gerbing. Billy
Title: Re: What did you do to or on your CVO today?
Post by: 2 ROSE on December 08, 2014, 10:53:57 PM
Damn FDX_TG...it lit you up pretty good!!! Looks like burnt flesh to me. I hope you went to the emergency room to have everything documented. Hopefully you do not wear the jacket and pants...if so you might go up like a human torch.
I hope it is not too serious.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on December 09, 2014, 07:05:38 AM
Hey Dave, thanks for the report on the windshield. Mind snapping a picture or 2.
Sorry it's already bike on my wife's bike.  I am ordering mine today in Dark Tint.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on December 09, 2014, 07:11:19 AM
Lets see, yesterday took it in for the 5K service.  Then went for a nice ride on US 129 and the Foothills Parkway.  On the way home, rolled over 6000 miles on the 15 SERGU.  Once home I put my POW Flag and my American Flag on my luggage rack, and I put plugs in all the holes in the frame where the floorboards use to be.

Might ride her a little today.  Will order the Klock werks 14 Sport in dark tint for my bike today.
Title: Re: What did you do to or on your CVO today?
Post by: LN Nation on December 09, 2014, 07:46:39 AM
Went to a Toys for Tots event in Totowa, NJ with my son. I rode the CVORK and he rode my deuce. Great time and fun to hang with my son.
Title: Re: What did you do to or on your CVO today?
Post by: LN Nation on December 09, 2014, 07:48:21 AM
I had to take a toy to work for our Toys for Tots collection drive and it was too big to fit in the saddlebags on my BMW so "Blue" got the call.  Just added the quick release rear luggage rack, strapped on the Caterpillar construction set and fired up the heated gear for the 38*F ride in. 

The interesting part was when a Nichrome wire in the Powerlet glove liner on my left hand decided to short-out and left a nice electrical burn on my hand.  Can't wait to see what my Powerlet dealer will have to say about this little product feature.

http://ridingtwoup.wordpress.com/2014/12/08/got-bitten-by-my-heated-gear-tonight-not-a-happy-camper/

Damn!. Must be something going on. My friend got a burn on his hand when using his Volt heated gloves.
Title: Re: What did you do to or on your CVO today?
Post by: porthole on December 09, 2014, 06:59:39 PM
Oh, that cord for the iPod,,, $140  :'(


What cord is that for?
Title: Re: What did you do to or on your CVO today?
Post by: porthole on December 09, 2014, 07:00:07 PM
Bullets go through the windshield

Your Sundance in the background?
Title: Re: What did you do to or on your CVO today?
Post by: T-Roy on December 09, 2014, 07:05:08 PM
Your Sundance in the background?

No that was the folks next to me in the campground.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on December 09, 2014, 07:32:22 PM
What cord is that for?
the one in the saddlebag on the Ultras.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on December 09, 2014, 07:34:18 PM
Put about 50 miles on it just to ride around to show some of my buddies. Program  the the GDO also.
Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on December 10, 2014, 05:30:23 PM
Hey Dave, thanks for the report on the windshield. Mind snapping a picture or 2.
Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on December 10, 2014, 05:31:27 PM
Another view
Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on December 10, 2014, 05:32:49 PM
And another
Title: Re: What did you do to or on your CVO today?
Post by: OBB on December 10, 2014, 06:37:27 PM
Another view
What size did you end up getting Joe?
Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on December 10, 2014, 06:52:25 PM
What size did you end up getting Joe?
The 14 inch Sport Tint.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on December 10, 2014, 08:47:20 PM
The 14 inch Sport Tint.
I like it. Any chance I can get you to take a measurement? From the top of the radio housing to the top of the windshield.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on December 10, 2014, 09:18:44 PM
The 14 inch Sport Tint.
Have the same on order but Dark Tint. 

So far Klock Werks has two types ,the sport at 14 and the tour.  The are very different.  They will have different heights in both in a while.

I did a test ride of the Tour in Daytona, very good protection, but almost to tall for me.  I figured with the lower seat I was going with I would want to test the sport with the new seat.  I did, and chose the sport.
Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on December 10, 2014, 10:10:45 PM
I like it. Any chance I can get you to take a measurement? From the top of the radio housing to the top of the windshield.
Here is the measurement.
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on December 11, 2014, 06:11:01 AM
New voltage regulator.   Funny ,. My 04 had 80k on it,,     Sold it with the original one on the bike and never once had a charging issue other than an old run down battery.   I'm on #3 on my sesg3.  They don't make these parts like they used to.  :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: OBB on December 11, 2014, 07:16:53 AM
Here is the measurement.
Perfect. Thanks Joe. That looks to be 1 1/4" shorter than stock. My stock shield measures 7" at that same point.
Title: Re: What did you do to or on your CVO today?
Post by: Ridgerunr on December 11, 2014, 08:04:56 AM
Thanks for the pics Joe.  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: graygus on December 11, 2014, 01:26:12 PM
Nice Joe thanks for the pictures mine is arriving tomorrow.
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on December 11, 2014, 06:01:36 PM
New voltage regulator.   Funny ,. My 04 had 80k on it,,     Sold it with the original one on the bike and never once had a charging issue other than an old run down battery.   I'm on #3 on my sesg3.  They don't make these parts like they used to.  :nixweiss:
how many amps is that audio system pull/draw  :nixweiss: saw in an other thread you stated you was having issues with it, may be related
Title: Re: What did you do to or on your CVO today?
Post by: knothead on December 12, 2014, 10:19:16 PM
Made Horsepower and got a new stable mate
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on December 13, 2014, 07:30:48 AM
Rode about 140 miles yesterday.  Noticed two thing, one after the 5K service I now have the handle bar slap when coasting down thru 40 mph.  Also when I pulled into the drive I noticed coolant dripping down the inside of the right lower.  So I will be riding to the dealership this AM, have a service appointment at 10:00

Oh, I also put the Klock Werks Sport Flare Dark tint on, sure improves the look. 
Title: Re: What did you do to or on your CVO today?
Post by: porthole on December 13, 2014, 03:50:38 PM
I now have the handle bar slap when coasting down thru 40 mph. 


Really - how disappointing  :-\
Title: Re: What did you do to or on your CVO today?
Post by: DesertHOG on December 13, 2014, 07:21:07 PM
Rode my FLTRUSE2 today. Turned over 1400 miles. Dave is way ahead of me.

DH
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on December 14, 2014, 07:45:17 AM
Really - how disappointing  :-\

We, and the dealer, several mechanics learned something yesterday.  14 and newer bikes have a different way to adjust the neck bearing.  If you on pin and move the bars forward, you get the handle bar slap when coasting down from 50 through to 30, slap is real bad right around 40.  Tried several times to adjust it per procedure and it would not be correct.  Move the bars to correct location and adjusted, then move the bars back to where I had them.  Seems much better and almost totally gone now. 

Wonder if this is why the non CVO 15 road glides all have the weights on their clutch and brake clamps at handle bars, as our CVO RG bars are longer with more pull back?

Why the can't Harley just have a torque spec?  That has to be how they built them, as they do not have time to do these tests on each and every touring bike.

So I ended up with four hours at service, no real ride.

Today we plan to ride...
Title: Re: What did you do to or on your CVO today?
Post by: Ridgerunr on December 14, 2014, 08:52:06 AM
Dave, did you speak to the tech about taller bars and if those will have an effect?
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on December 14, 2014, 09:46:53 AM
We, and the dealer, several mechanics learned something yesterday.  14 and newer bikes have a different way to adjust the neck bearing.  If you on pin and move the bars forward, you get the handle bar slap when coasting down from 50 through to 30, slap is real bad right around 40.  Tried several times to adjust it per procedure and it would not be correct.  Move the bars to correct location and adjusted, then move the bars back to where I had them.  Seems much better and almost totally gone now. 

Wonder if this is why the non CVO 15 road glides all have the weights on their clutch and brake clamps at handle bars, as our CVO RG bars are longer with more pull back?

Why the can't Harley just have a torque spec?  That has to be how they built them, as they do not have time to do these tests on each and every touring bike.

So I ended up with four hours at service, no real ride.

Today we plan to ride...
  i have been thru this on both my RGs (more than once!) and now i have neck bearings over tightened (per the swing test procedure) and it will still  shake when it feels like it, i have noticed that is more likely to shake if tire PSI gose under 40, so keep an eye on that. its kinda like the compensator mystery, some things you just have to learn to live with
Title: Re: What did you do to or on your CVO today?
Post by: Puma on December 14, 2014, 05:35:26 PM
Is this a RG issue? I haven't experienced it on my CVORK, but I also haven't had anything serviced yet.
Title: Re: What did you do to or on your CVO today?
Post by: Ripcord on December 14, 2014, 07:08:05 PM
Installed Sancho's wings and a stabilizer made by AlloyArt. Wings were an easy install but I had problems with the stabilizer - they use the same connection point as my mid-frame heat deflectors. This turned out to be a real pain. I removed the heat deflector while I think about a work around.
Title: Re: What did you do to or on your CVO today?
Post by: knothead on December 14, 2014, 07:15:36 PM
Rode 854 miles and took a picture
Title: Re: What did you do to or on your CVO today?
Post by: bigC on December 14, 2014, 07:59:44 PM
Started the break in on the new bike and put on the first 100 miles :pepper:
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on December 14, 2014, 08:25:28 PM
Are you saying all RG's have a tank slap issue? I haven't heard that before.




Wow........well after digging through the site and some reading I'm beginning to rethink a RG as a future purchase. 
Title: Re: What did you do to or on your CVO today?
Post by: JQCVO on December 14, 2014, 08:33:23 PM
Put on a fresh coat of Royal Blue. Nice and shiny and getting ready for storage for winter.
Title: Re: What did you do to or on your CVO today?
Post by: 2 ROSE on December 14, 2014, 10:03:53 PM
Are you saying all RG's have a tank slap issue? I haven't heard that before.

Wow........well after digging through the site and some reading I'm beginning to rethink a RG as a future purchase.


What is tank slap??? :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on December 14, 2014, 10:27:26 PM
Are you saying all RG's have a tank slap issue? I haven't heard that before.




Wow........well after digging through the site and some reading I'm beginning to rethink a RG as a future purchase.
i wouldnt call it tank slap, its a shake in the bars on decell and it comes in at 40 MPH and is gone at 39 MPH and only happens if your hands are not on the bars, then when it dose happen all i do is touch the bars with one finger for a split second and its just fine. it is a very random occurrence,
Title: Re: What did you do to or on your CVO today?
Post by: SBB on December 14, 2014, 10:31:12 PM

What is tank slap??? :nixweiss:

Explanation = http://en.wikipedia.org/wiki/Speed_wobble

Example = https://www.youtube.com/watch?v=Zu-vReD3Jx0

Next question!

 :2vrolijk_21:

SBB



Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on December 14, 2014, 10:39:34 PM
thats what i call tank slap...SBB
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on December 14, 2014, 10:57:46 PM
My brother in law bought a new KTM 1190 adventure bike (not sure if thats what they call it) last night so i chased him around the mountains (obviously the paved roads) for a couple of hundred miles today. Big fun and was definitely "working" that 120r to try and keep up! That KTM is a hell of a bike
Title: Re: What did you do to or on your CVO today?
Post by: 2 ROSE on December 14, 2014, 11:29:20 PM
Thanks SBB.
Damn that tank slap is some serious chit!!! Looking like some ball slapping going on there also.
I would be getting my money back if it was my bike. I am thinking it will get worse before it gets better. I for sure would not tolerate that even if it was just a little bit.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on December 15, 2014, 08:10:50 AM
  i have been thru this on both my RGs (more than once!) and now i have neck bearings over tightened (per the swing test procedure) and it will still  shake when it feels like it, i have noticed that is more likely to shake if tire PSI gose under 40, so keep an eye on that. its kinda like the compensator mystery, some things you just have to learn to live with

Yes I am aware of this.  Had the issue on my 09, and 12.  It was due to using the regular touring bike spec, not the Road glide spec.  Harley made it two different spec in 10 I think.  Thing is, for 13 and older Road Glides have an older method for adjustment.  The 15's have a new method.  I never had an issue with it in 5500 miles on my bike.  Then it was adjusted per the new method and it was violent every time.  Found that they had to put bars to stock position then test and adjust.  Then moved bars back to where they were.  Much better now.


Is this a RG issue? I haven't experienced it on my CVORK, but I also haven't had anything serviced yet.

Seems for the most part only Road Glides.  It could happen on any with the neck bearing adjusted wrong.  The mistake is, all turing bikes use the same spec except the road glide.  When they adjust a rg to the normal spec you get the issue on a RG
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on December 15, 2014, 08:16:07 AM
Are you saying all RG's have a tank slap issue? I haven't heard that before.




Wow........well after digging through the site and some reading I'm beginning to rethink a RG as a future purchase.

with the 13 and earlier road glides it was an issue when the dealer set it up wrong.  Which was common as they would set it to touring bike spec, which is different than Road glide spec.  I would just remind the dealer to set it to road glide spec each service, no issues when they did that.

I am the first 15 I have heard of with the issue.  It was not an issue for the first 5500 miles.  I tried to make it do it when I first got the bike, it would not.  Bike was serviced, and part of the 5K is check the fall a way or neck bearing.  They adjusted and very first ride I noticed the tank slap.

It's an issue with Harleys procedure I believe on the 15.  As come out of the factory, my wife's 15 has not had tank slap, and Joes 15 CVORG has not had tank slap, they have not had 5K service, and they have not moved the bars.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on December 15, 2014, 08:19:01 AM
Yesterday we went for a 330 mile ride, as it's was my last full day before I head back off shore to work.  Weather man sure missed on the forecast, as it was suppose to go to 54 and sunny.  It was cloudy and never got above 38.  It was a great ride in the hills of East TN and North GA, great curvy roads.
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on December 15, 2014, 09:00:07 AM
I'm with you, Dave.  Weather prediction in East TN ain't worth a crap.  Missed the entire weekend by a mile.  If I want an accurate weather forcast now, I just walk outside......

Glad you enjoyed the riding.  We do have some great roads/scenery in our neck of the world.  Be careful and stay safe back on the sea....God speed, brother.
Title: Re: What did you do to or on your CVO today?
Post by: J.Mart60 on December 19, 2014, 06:01:41 AM
Since the temps here in Central Florida have been in the high 30's and low 40's I got to play with the heated seat and grips. The grips are great with the 6 settings, easy to find a comfy temp. The seat is a whole nother story. It has 2 settings, low and scorched buns! Jeez oh pete! After a few miles of high setting I started looking like a DWI candidate, swerving around trying to keep from having a fire burst up from my drawers if ya know what I mean. Will be staying with the low setting till it gets colder but hoping I won't need it at all. 
Title: Re: What did you do to or on your CVO today?
Post by: charles05663 on December 19, 2014, 07:58:25 AM
Since the temps here in Central Florida have been in the high 30's and low 40's I got to play with the heated seat and grips. The grips are great with the 6 settings, easy to find a comfy temp. The seat is a whole nother story. It has 2 settings, low and scorched buns! Jeez oh pete! After a few miles of high setting I started looking like a DWI candidate, swerving around trying to keep from having a fire burst up from my drawers if ya know what I mean. Will be staying with the low setting till it gets colder but hoping I won't need it at all.

Sounds like you better not fart if you are on high...

 :oops: :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: Puma on December 20, 2014, 08:17:27 AM
dragula  new  softail  system ...sent pics  that Frank wanted of my current system that's on my bike
I just got his new Dragula 2 for Touring. Looks nice.
Title: Re: What did you do to or on your CVO today?
Post by: cmashark on December 20, 2014, 11:55:11 AM
Prepping this for install...
Title: Re: What did you do to or on your CVO today?
Post by: luc.who on December 20, 2014, 05:07:00 PM
Installed my fullsac dx pipe, tuned with the tts master tune and Steve's map, ALS added my vtwingoodies floorboard extenders.

I'm smiling now.  Just need to work out the highway pegs.
Title: Re: What did you do to or on your CVO today?
Post by: JQCVO on December 20, 2014, 06:34:00 PM
Continued the process of applying a coat of Royal Blue to both bikes. Man it takes a long time to get at everything. Bikes are harder than cars. Much more detail.
Title: Re: What did you do to or on your CVO today?
Post by: 2 ROSE on December 20, 2014, 07:00:18 PM
Continued the process of applying a coat of Royal Blue to both bikes. Man it takes a long time to get at everything. Bikes are harder than cars. Much more detail.


Tru Dat!!! :)
Title: Re: What did you do to or on your CVO today?
Post by: danner55 on December 20, 2014, 07:37:37 PM
FLSTFI Dave

I bought my 89 FLTC (Tour Glide) in 1991 with 4400 miles on it. It had (Tank Slap) then & had it checked out. Neck bearings adjusted & dealer talked to the MOCO  & I was told, back in 1991 that motorcycles are not to be rode with your hands off the handle bars!

80,000+ miles, numerous front tires,tire pressure OK, wheel bearings, chrome lower legs. 23 years later, it still has Tank Slap on decel around 40 mph. It doesn't happen often but I'm aware of it!

As the MOCO stated years ago. Keep your hands on the handle bars!  I have just learned to live with it! :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on December 20, 2014, 08:29:55 PM
FLSTFI Dave

I bought my 89 FLTC (Tour Glide) in 1991 with 4400 miles on it. It had (Tank Slap) then & had it checked out. Neck bearings adjusted & dealer talked to the MOCO  & I was told, back in 1991 that motorcycles are not to be rode with your hands off the handle bars!

80,000+ miles, numerous front tires,tire pressure OK, wheel bearings, chrome lower legs. 23 years later, it still has Tank Slap on decel around 40 mph. It doesn't happen often but I'm aware of it!

As the MOCO stated years ago. Keep your hands on the handle bars!  I have just learned to live with it! :nixweiss:
Keeping your hands on the bars is not the answer, and should not be the answer.  There is no reason that when properly set up that it should have the front end wobble or tank slap.  This bike did not do it until the neck bearing was adjsuted per Harleys new procedure for the 15 Road Glide.  My first test when I bought the bike was hands off bars on decel to see if it hand the front end wobble or tank slap, it did not.  Next was to make sure it tracked true at 75 mph hands off bars.

The front end wobble appeared the very first ride after the new fall a way test was done and neck bearing adjusted.  It's almost gone now after many more readjustmets. 

This my third road glide.  My 12 only had this issue twice, both times after the neck bearing was adjusted to Electra glide spec.  Both times after the dealer was shown the difference in road glide spec it was corrected and eliminated.  Same with my 09.  I have just over 95,0000 miles on road glides since 09.
Title: Re: What did you do to or on your CVO today?
Post by: graygus on December 20, 2014, 10:25:32 PM
I added these vent screens in my Fairing
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on December 20, 2014, 10:33:46 PM
I added these vent screens in my Fairing
Looks great!
Title: Re: What did you do to or on your CVO today?
Post by: OBB on December 20, 2014, 10:39:57 PM
I added these vent screens in my Fairing
Ok, give it up. Who's making them? After having a very large bee get sucked up in the side vent this year during a test ride, I've been waiting for them to come out.


** never mind. A quick search found them on KW site.... and for a mere $74.95 ::)
Title: Re: What did you do to or on your CVO today?
Post by: graygus on December 21, 2014, 12:35:27 AM
Sorry OBB I should have mentioned where I got them. If I had to do it again I would have made them myself rather than paying KW 475 there isn't much to them. The install on the other hand requires removing the outer fairing. KW has a you tube video on that for those interested.
Title: Re: What did you do to or on your CVO today?
Post by: graygus on December 21, 2014, 12:36:16 AM
oops I meant $75
Title: Re: What did you do to or on your CVO today?
Post by: OBB on December 21, 2014, 03:53:24 AM
Sorry OBB I should have mentioned where I got them. If I had to do it again I would have made them myself rather than paying KW 475 there isn't much to them. The install on the other hand requires removing the outer fairing. KW has a you tube video on that for those interested.
Here's that video. When I watched it, I realized how easy it would be to make them myself.



https://www.youtube.com/watch?v=azcIFMXhbP0&feature=youtu.be&list=UU0eXOdMUrIKm_ysMdZJYCWQ
Title: Re: What did you do to or on your CVO today?
Post by: Phantom309 on December 21, 2014, 07:31:20 AM
I added these vent screens in my Fairing

I like'm! Looks good, now you should wire up a couple amber led lights to backlight them ... would look cool at night.
Title: Re: What did you do to or on your CVO today?
Post by: Phantom309 on December 21, 2014, 07:37:46 AM
Here's that video. When I watched it, I realized how easy it would be to make them myself.



https://www.youtube.com/watch?v=azcIFMXhbP0&feature=youtu.be&list=UU0eXOdMUrIKm_ysMdZJYCWQ

Yeah, for 75 bucks the guy should come to your house and install them for you ... they are making a killing on those. Lets see some pics of your's when finished. Are you going to paint them to match?
Title: Re: What did you do to or on your CVO today?
Post by: OBB on December 21, 2014, 08:34:34 AM
Yeah, for 75 bucks the guy should come to your house and install them for you ... they are making a killing on those. Lets see some pics of your's when finished. Are you going to paint them to match?
Depends on what material I find to make them with. I think black would blend in nice but the CVO is a chrome whore.
Title: Re: What did you do to or on your CVO today?
Post by: cambo on December 21, 2014, 10:36:41 AM
Depends on what material I find to make them with. I think black would blend in nice but the CVO is a chrome whore.

 :huepfenlol2:
Title: Re: What did you do to or on your CVO today?
Post by: Mano on December 23, 2014, 06:42:56 PM
Rode It.....2 different evenings for 225 KM in below 0 temps. :huepfenjump3:

Thank you Gerbing. :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: 2 ROSE on December 23, 2014, 06:55:59 PM
MANO!!!
I see you are part of Steeler Nation. Lets hope they can make some noise this year. Big game Sunday against the bungles. Stay Warm!
Title: Re: What did you do to or on your CVO today?
Post by: Mano on December 23, 2014, 07:06:58 PM
MANO!!!
I see you are part of Steeler Nation. Lets hope they can make some noise this year. Big game Sunday against the bungles. Stay Warm!

Love our Steelers....I have been coming to Pittsburgh since November 1988. First game was against the Bears, Lost 20-0. Went to the last game at Three Rivers and the first at Heinz Field. Working on tickets for Sunday...no need to stay warm for me. If I go I will be in a box. :bananarock:
Title: Re: What did you do to or on your CVO today?
Post by: OBB on December 23, 2014, 09:40:59 PM
Ordered more goodies. Almost time to put it on the jack and start tearing into it.
Title: Re: What did you do to or on your CVO today?
Post by: Camojeeper on December 24, 2014, 02:32:01 AM
Saddled up this morning around 10 for the first time in about 3weeks ( damn rain ).
Anyhow.... North bound on I-5 for about 30 miles into redding Ca then west towards the pacific cost line. Hwy 299 W is a great 3rd or 4th gear windy road in nor cal. Stopped  by Whiskey town lake for some tobacco. Then on up the 3000' buckhorn summit.  Rode up to weaverville for a cold one then back home spent about 4 hours out on my scoot.  Merry Christmas guys

Steve


Title: Re: What did you do to or on your CVO today?
Post by: JQCVO on December 24, 2014, 12:33:57 PM
Waxing the rims - I hate that job! Ba humbug  :D

Merry Chriistmas CVO brethren.
Title: Re: What did you do to or on your CVO today?
Post by: Puma on December 24, 2014, 03:41:45 PM
Waxing the rims - I hate that job! Ba humbug  :D

Merry Chriistmas CVO brethren.
2011 CVO Conv. and 2014 CVORK are easy. So glad I don't have to do the rear on a Heritage any longer. I think I'll do mine this weekend, too, after the pipe install. There will be fingerprints.
You have a merry one, too.
Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on December 27, 2014, 05:02:11 PM
Was bored so I installed some vent screens.
(http://tapatalk.imageshack.com/v2/14/12/27/a3acdba7aeb757d8664d625a7c9d3f30.jpg)
(http://tapatalk.imageshack.com/v2/14/12/27/0f7c50e29d3bb0b17a0cb7deeae0a464.jpg)
(http://tapatalk.imageshack.com/v2/14/12/27/450b7ff89181e396fae059caca6660ca.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: JQCVO on December 27, 2014, 05:40:58 PM
Took advantage of a near 60 degree day in December and did a quick 40 miles loop. Wish I stayed out longer.
Title: Re: What did you do to or on your CVO today?
Post by: Puma on December 27, 2014, 06:18:42 PM
Picked up the bike after getting Dragos Bike Works new Dragula 2 installed. Mid fifties so a good test ride. It doesn't suck.
Title: Re: What did you do to or on your CVO today?
Post by: Puma on December 27, 2014, 06:19:37 PM
Close up
Title: Re: What did you do to or on your CVO today?
Post by: Puma on December 27, 2014, 06:20:33 PM
Ghost pipe lined up nice.
Title: Re: What did you do to or on your CVO today?
Post by: Puma on December 27, 2014, 06:25:36 PM
Sorry pics aren't the clearest. I have to take them on a low quality setting to keep the files small enough for the forums. These dyno results are 82.85 hp stock up to 97.57 with the new pipe and tune (SESTP). Torque went from 96.17 ft-lbs. stock to 117.93 with the new pipe and tune. Also replaced the torque dip at 3000 rpm with the PEAK. That's an increase of over 25 ft-lbs. at that rpm. :bananarock:
Title: Re: What did you do to or on your CVO today?
Post by: Digital on December 27, 2014, 06:30:18 PM
Installed a Hammock (part number ending on 176) seat with the standard rider backrest.   This is the first replacement seat that I have ever bought for any of my bikes and damn it feels good.   No ride yet but I can already say it is an improvement.   

(http://i1239.photobucket.com/albums/ff505/Digital1976/67043BF1-16DA-417B-AD68-A9395896EA5E_zps1nuvzagq.jpg) (http://s1239.photobucket.com/user/Digital1976/media/67043BF1-16DA-417B-AD68-A9395896EA5E_zps1nuvzagq.jpg.html)

(http://i1239.photobucket.com/albums/ff505/Digital1976/83E19BB6-F345-4B3A-A7FF-94340FC70F24_zpsfkqycvxb.jpg) (http://s1239.photobucket.com/user/Digital1976/media/83E19BB6-F345-4B3A-A7FF-94340FC70F24_zpsfkqycvxb.jpg.html)

(http://i1239.photobucket.com/albums/ff505/Digital1976/2C22D77C-B4DB-46DE-BEDB-9895A6665729_zpswzbileu3.jpg) (http://s1239.photobucket.com/user/Digital1976/media/2C22D77C-B4DB-46DE-BEDB-9895A6665729_zpswzbileu3.jpg.html)

(http://i1239.photobucket.com/albums/ff505/Digital1976/C0D343AF-18AA-40D0-89F6-08CA82439F3E_zps4htvn2uu.jpg) (http://s1239.photobucket.com/user/Digital1976/media/C0D343AF-18AA-40D0-89F6-08CA82439F3E_zps4htvn2uu.jpg.html)
Title: Re: What did you do to or on your CVO today?
Post by: OBB on December 27, 2014, 06:46:38 PM
Took all my boxes of goodies out to the garage. Put the bike on the jack, took the saddlebags off and installed the CD turn signals front and rear. I have a whole table full of stuff to get taken care of. I'll update progress as I go but pix will wait until I'm finished.
Title: Re: What did you do to or on your CVO today?
Post by: Puma on December 27, 2014, 07:12:32 PM
Sorry pics aren't the clearest. I have to take them on a low quality setting to keep the files small enough for the forums. These dyno results are 82.85 hp stock up to 97.57 with the new pipe and tune (SESTP). Torque went from 96.17 ft-lbs. stock to 117.93 with the new pipe and tune. Also replaced the torque dip at 3000 rpm with the PEAK. That's an increase of over 25 ft-lbs. at that rpm. :bananarock:
Scanned the dyno printout.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on December 27, 2014, 08:53:18 PM
Was bored so I installed some vent screens.
(http://tapatalk.imageshack.com/v2/14/12/27/a3acdba7aeb757d8664d625a7c9d3f30.jpg)
(http://tapatalk.imageshack.com/v2/14/12/27/0f7c50e29d3bb0b17a0cb7deeae0a464.jpg)
(http://tapatalk.imageshack.com/v2/14/12/27/450b7ff89181e396fae059caca6660ca.jpg)
Looks good Joe.  Was it pretty easy?
Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on December 28, 2014, 09:38:38 AM
Looks good Joe.  Was it pretty easy?
Yes, very easy. Got another set made that I am going to paint gloss black. I am going to swap them out to see which ones I like the best.
Title: Re: What did you do to or on your CVO today?
Post by: Quantumracer on December 28, 2014, 10:30:29 AM
36 degrees this morning, but it was clear...so I rode to work (40 miles). :cucumber: :cucumber:

 :drink:
Title: Re: What did you do to or on your CVO today?
Post by: luc.who on December 28, 2014, 10:32:28 AM
36 degrees this morning, but it was clear...so I rode to work (40 miles). :cucumber: :cucumber:

 :drink:

Kewl.. bike runs pretty good at those temps! 
Title: Re: What did you do to or on your CVO today?
Post by: Quantumracer on December 28, 2014, 10:40:43 AM
Kewl.. bike runs pretty good at those temps!
Yea, she had a little extra pep in her step this morning...love that cold air!

 :drink:
Title: Re: What did you do to or on your CVO today?
Post by: OBB on December 28, 2014, 10:40:56 AM
Yes, very easy. Got another set made that I am going to paint gloss black. I am going to swap them out to see which ones I like the best.
I looked at that same piece of metal at Home Depot last weekend and didn't care for the pattern. Looking forward to seeing them in black.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on December 28, 2014, 05:06:20 PM
I looked at that same piece of metal at Home Depot last weekend and didn't care for the pattern. Looking forward to seeing them in black.
Found a couple sheets on ebay that should work. We'll see what it looks like when it gets here. I ordered the thinnest stuff I could find.
Title: Re: What did you do to or on your CVO today?
Post by: Billy on December 28, 2014, 05:37:36 PM
MY wife and I took out the bikes and road 60 miles today only 30 degrees but sunny and a whole suit of Gerbing. Works great wanted to ride all day   NO salt so we just had to go.  Billy
Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on December 28, 2014, 06:49:46 PM
MY wife and I took out the bikes and road 60 miles today only 30 degrees but sunny and a whole suit of Gerbing. Works great wanted to ride all day   NO salt so we just had to go.  Billy

 :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on December 28, 2014, 07:19:06 PM
I looked at that same piece of metal at Home Depot last weekend and didn't care for the pattern. Looking forward to seeing them in black.
Black set installed
Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on December 28, 2014, 07:22:07 PM
I looked at that same piece of metal at Home Depot last weekend and didn't care for the pattern. Looking forward to seeing them in black.
Black set installed
Title: Re: What did you do to or on your CVO today?
Post by: OBB on December 28, 2014, 07:46:16 PM
Black set installed
Leave the black ones in. Just my opinion. Where did you get the metal from and how big was it? How many pieces did you get out of it? I have two sheets of 12x24 coming in case I screw up big time making them.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on December 28, 2014, 09:00:17 PM
Joe, I think I like the black better also.  Looks good.
Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on December 28, 2014, 10:04:14 PM
Leave the black ones in. Just my opinion. Where did you get the metal from and how big was it? How many pieces did you get out of it? I have two sheets of 12x24 coming in case I screw up big time making them.

I got the 24"x36" sheet from Lowes. Lots left over. You need about a 4"X7" piece for each vent. You'll be fine with the 12"x24".
Title: Re: What did you do to or on your CVO today?
Post by: OBB on December 29, 2014, 06:03:17 AM
I got the 24"x36" sheet from Lowes. Lots left over. You need about a 4"X7" piece for each vent. You'll be fine with the 12"x24".
  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: LV76 on December 29, 2014, 06:55:23 AM
Joe,
I have a couple of questions on the vent screens install -
How do they attach?
What do you think the maximum thickness of material that can be installed?
Thanks
Title: Re: What did you do to or on your CVO today?
Post by: Ridgerunr on December 29, 2014, 08:58:38 AM
Looks good Joe.  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on December 29, 2014, 10:36:32 AM
Joe,
I have a couple of questions on the vent screens install -
How do they attach?
What do you think the maximum thickness of material that can be installed?
Thanks

When you remove the outer fairing there is a recess cut in the inner fairing that is approximately about a 1/4 of an inch wide. The headlight bezel has a small gap where it mounts to the inner fairing. The screen is cut so that the inside part slides into the gap around the headlight bezel. The outer part of the screen covers the recess and is held in place by the outer faring where it fits into the recess. The metal I used is 24 gauge and it fills the gap with not a lot of room to spare. You might be able to use 20 gauge but then it might be difficult sliding it into place.
Title: Re: What did you do to or on your CVO today?
Post by: YELLOWBIRD on December 29, 2014, 11:06:52 AM
Black set installed



My vote is the Black screens!

Pretty work! I love it when members find D.I.Y. And can save $$$ paying the big money to those big money companies! (However, thank you goes out to Klockwerks for the idea.  :2vrolijk_21:)

Also, the new 2015 road glides fairings seems ALOT easier to take on and off then the 2013 and older models!

Any luck with the big middle vent with adding a screen?


YB
Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on December 29, 2014, 11:54:39 AM


My vote is the Black screens!

Pretty work! I love it when members find D.I.Y. And can save $$$ paying the big money to those big money companies! (However, thank you goes out to Klockwerks for the idea.  :2vrolijk_21:)

Also, the new 2015 road glides fairings seems ALOT easier to take on and off then the 2013 and older models!

Any luck with the big middle vent with adding a screen?


YB

The new fairings are definitely easier. I hadn't given any thought to the middle vent. Might have to take a closer look at it.
Title: Re: What did you do to or on your CVO today?
Post by: YELLOWBIRD on December 29, 2014, 11:57:07 AM
The new fairings are definitely easier. I hadn't given any thought to the middle vent. Might have to take a closer look at it.



 :2vrolijk_21:


YB
Title: Re: What did you do to or on your CVO today?
Post by: 2 ROSE on December 29, 2014, 12:47:11 PM
Hey CVOSJOE,
Yeah I agree the black looks much better. I do not own a Road Glide but am considering one in a year or two. Being the uneducated softtail rider that I am what is the purpose of the vents. I can see the pros of the vent covers...besides looks it may stop the splattering of birds and bugs inside the vents making any guts easier to access and clean. But it appears to restrict the air flow surface area by at least 50%.  Might it also stop or restrict the passage of air to the rider thereby affecting rider comfort on hot summer days or maybe even affect areodynamics in some strange way creating wind turbulence, noise or even vibration? I assume you have done some higher speed riding to make sure nothing out of the ordinary has developed. Probably everything is fine...but like I said I do not own one but am very interested.
Title: Re: What did you do to or on your CVO today?
Post by: LV76 on December 30, 2014, 04:05:34 AM
When you remove the outer fairing there is a recess cut in the inner fairing that is approximately about a 1/4 of an inch wide. The headlight bezel has a small gap where it mounts to the inner fairing. The screen is cut so that the inside part slides into the gap around the headlight bezel. The outer part of the screen covers the recess and is held in place by the outer faring where it fits into the recess. The metal I used is 24 gauge and it fills the gap with not a lot of room to spare. You might be able to use 20 gauge but then it might be difficult sliding it into place.

Thanks Joe
Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on December 30, 2014, 02:10:47 PM
Hey CVOSJOE,
Yeah I agree the black looks much better. I do not own a Road Glide but am considering one in a year or two. Being the uneducated softtail rider that I am what is the purpose of the vents. I can see the pros of the vent covers...besides looks it may stop the splattering of birds and bugs inside the vents making any guts easier to access and clean. But it appears to restrict the air flow surface area by at least 50%.  Might it also stop or restrict the passage of air to the rider thereby affecting rider comfort on hot summer days or maybe even affect areodynamics in some strange way creating wind turbulence, noise or even vibration? I assume you have done some higher speed riding to make sure nothing out of the ordinary has developed. Probably everything is fine...but like I said I do not own one but am very interested.

2 ROSE,
I will update you on this once I have had a chance to road test the bike.
Joe
Title: Re: What did you do to or on your CVO today?
Post by: JQCVO on December 31, 2014, 07:21:31 PM
It's like 25 degrees here in NY.  What did I do? I opened up the door to my garage and stared at my bikes. That's what I did.
I hate winter.
Title: Re: What did you do to or on your CVO today?
Post by: jachd17 on December 31, 2014, 08:44:56 PM
It's like 25 degrees here in NY.  What did I do? I opened up the door to my garage and stared at my bikes. That's what I did.
I hate winter.
X2
Title: Re: What did you do to or on your CVO today?
Post by: Puma on December 31, 2014, 08:50:30 PM
It's like 25 degrees here in NY.  What did I do? I opened up the door to my garage and stared at my bikes. That's what I did.
I hate winter.
x3
Title: Re: What did you do to or on your CVO today?
Post by: TXGator on December 31, 2014, 11:45:25 PM
It's like 25 degrees here in NY.  What did I do? I opened up the door to my garage and stared at my bikes. That's what I did.
I hate winter.

Yep these 70 degree days down here are killing me too.  It's a bit to nippy to leave before 8AM and wear a short sleeve..
Sorry, had to do it.  :-\
Title: Re: What did you do to or on your CVO today?
Post by: J.Mart60 on January 01, 2015, 01:43:44 AM
Rode into work tonight, poop never sleeps, on the CVO since it is more lit up than my daily rider. Hoping the drunks are passed out by the time I leave in the morning.  Like TXGator said, its kinda nipply, had to wear a leather jacket and brought the chaps for in the morning when the temps drop to 60. brrr
Title: Re: What did you do to or on your CVO today?
Post by: Nicky Pass on January 01, 2015, 10:30:48 AM
60!  It was 6 when I went to work yesterday morning!
Title: Re: What did you do to or on your CVO today?
Post by: Royalroadie on January 01, 2015, 12:42:09 PM
I went on a polar bear ride this morning.  14 f#*k?ng degrees for 20+ miles.  I am awake now!
Title: Re: What did you do to or on your CVO today?
Post by: TXGator on January 01, 2015, 03:29:08 PM
Just got back from a 70 mile ride to Orange Park for lunch and then back out to St Augustine to escort some buddy's back towards Deltona.  Cloudy and cool but worth it.
Title: Re: What did you do to or on your CVO today?
Post by: Billy on January 01, 2015, 04:40:55 PM
My wife and I went outside it was 25 looked at the roads still no salt or snow .So on with the Gerbing and a short 50 mile ride. Warm as toast. Just seems like you are getting away with something riding in Jan 1. Lots of fun Probably ;D will go tomorrow because snow is coming Sat. Billy 8)
Title: Re: What did you do to or on your CVO today?
Post by: cmashark on January 01, 2015, 10:16:35 PM
51 degrees here, so I went out for a short ride just over 50 miles this evening. Looking forward to tomorrow's ride.  No heated gear, but I do have a heated seat.  I really need to get a set of those gloves and a vest!
Title: Re: What did you do to or on your CVO today?
Post by: SBB on January 02, 2015, 08:35:34 AM




New Years Day ride with 35 friends.
A little chilly to start but by the ride home it was mid fifties.

SBB

(https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-xfp1/t31.0-8/10486243_10204683872829884_5819806823309705202_o.jpg)


(https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-xpa1/t31.0-8/10896245_10204683864469675_6482160262573060478_o.jpg)


(https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-xpa1/t31.0-8/10818449_10204683869869810_466866747873297791_o.jpg)


Title: Re: What did you do to or on your CVO today?
Post by: T-Roy on January 02, 2015, 01:39:26 PM
I installed a bullet shifter linkage to go with my bullet screw covers.
Title: Re: What did you do to or on your CVO today?
Post by: T-Roy on January 02, 2015, 01:40:49 PM
another view of the linkage
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on January 02, 2015, 03:46:57 PM
another view of the linkage
\
Nice
Title: Re: What did you do to or on your CVO today?
Post by: Lars on January 02, 2015, 04:15:25 PM
cmashark,

I'd start with installing heated grips.
You may find that they will do the trick.
That's all I use on my SEUC8.
Don't need any of that other expensive stuff and don't have to worry about unplugging wires or turning things off when I dismount.

Just a thought.
Title: Re: What did you do to or on your CVO today?
Post by: Jock on January 02, 2015, 04:19:41 PM



New Years Day ride with 35 friends.
A little chilly to start but by the ride home it was mid fifties.

SBB

(https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-xfp1/t31.0-8/10486243_10204683872829884_5819806823309705202_o.jpg)


(https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-xpa1/t31.0-8/10896245_10204683864469675_6482160262573060478_o.jpg)


(https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-xpa1/t31.0-8/10818449_10204683869869810_466866747873297791_o.jpg)

Atta Boy!

 :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: cmashark on January 02, 2015, 10:24:40 PM
Was able to knock out another 100 miles today. I'll have this engine broken in no time!

Chris

cmashark,

I'd start with installing heated grips.
You may find that they will do the trick.
That's all I use on my SEUC8.
Don't need any of that other expensive stuff and don't have to worry about unplugging wires or turning things off when I dismount.

Just a thought.

Thanks Lars, I'll look into them.  Maybe I can demo a bike at the dealer with them.

Title: Re: What did you do to or on your CVO today?
Post by: SBB on January 02, 2015, 10:54:05 PM
Was able to knock out another 100 miles today. I'll have this engine broken in no time!

Chris

Thanks Lars, I'll look into them.  Maybe I can demo a bike at the dealer with them.

Chris
Try the heated grips.
They are great. With heated grips I don't have to wear the heavy gloves.
You will like them.

 :2vrolijk_21:

SBB



Title: Re: What did you do to or on your CVO today?
Post by: FLHTCUSE7 on January 02, 2015, 11:42:33 PM
Why does Harley riders have to look like pirates?  Seriously, it's just the eye patch that's missing for some.
Title: Re: What did you do to or on your CVO today?
Post by: owl893 on January 03, 2015, 04:48:39 AM
couple of our NAM guys have eye patches, but I don't think you'd want to call 'em a Pirate.
Title: Re: What did you do to or on your CVO today?
Post by: cambo on January 03, 2015, 07:26:59 AM
Why does Harley riders have to look like pirates?  Seriously, it's just the eye patch that's missing for some.

For the same reasons sport bikers have to look like robots.  :nixweiss: Me, I always wanted to look like a pirate, hence the Harley. ;)
Title: Re: What did you do to or on your CVO today?
Post by: OBB on January 03, 2015, 08:12:35 AM
For the same reasons sport bikers have to look like robots.  :nixweiss: Me, I always wanted to look like a pirate, hence the Harley. ;)
CLASSIC :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: aclass on January 03, 2015, 08:41:10 AM
Swapped out my unwrapped D&D muffler for the wrapped baffle and rode about 60 miles.  Reckon I'm getting old but the "less noise" was pleasant.
Title: Re: What did you do to or on your CVO today?
Post by: LN Nation on January 03, 2015, 09:43:57 AM
Went on Dale's Chilly Chili Run in Ogdensburg, NJ. Not a fan of organized runs but it was a good cause, Karen Ann Quinlan Centre of Hope Hospice. Outside temperature was 25* when I left the house at 9am and never got above 35*. It was an hour's ride to get there and the 30 mile run never got above 40mph.

I'm grateful for my heated gear, but my Harley (Gerbing's) gloves don't seem to get as warm as they used to. Also, the boot insoles are on the same control circuit as the gloves. So, when the temp is turned up to keep my hands warm, my feet are on fire. Oh well, better than being cold.
Title: Re: What did you do to or on your CVO today?
Post by: LN Nation on January 03, 2015, 09:51:41 AM
cmashark,

I'd start with installing heated grips.
You may find that they will do the trick.
That's all I use on my SEUC8.
Don't need any of that other expensive stuff and don't have to worry about unplugging wires or turning things off when I dismount.

Just a thought.
I'm wondering how effective heated grips are in the extreme cold. I have a CVORK with no fairing and the backs of my hands are not protected from the elements. I'm thinking that heated gloves are a better choice for this situation because both the palm side and back side are heated.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on January 03, 2015, 10:28:55 AM
I'm wondering how effective heated grips are in the extreme cold. I have a CVORK with no fairing and the backs of my hands are not protected from the elements. I'm thinking that heated gloves are a better choice for this situation because both the palm side and back side are heated.
Fairing or not, those of us with handlebar mounted mirrors get plenty of wind deflected right onto the knuckles. I myself wear a pair of snowmobile gloves when riding below 50*. Windproof, waterproof, warm and no cords to mess with. If it gets too bitter, I crank up the grips but most of the time if I do that, they make my hands sweat.
Title: Re: What did you do to or on your CVO today?
Post by: SBB on January 03, 2015, 11:01:36 AM
I'm wondering how effective heated grips are in the extreme cold. I have a CVORK with no fairing and the backs of my hands are not protected from the elements. I'm thinking that heated gloves are a better choice for this situation because both the palm side and back side are heated.

It has been my experience that with the heated grip I need to wear the thinner gloves to be able to feel the grip heat. We left Charlotte headed for Daytona and the temp was 19*. My hands were fine but I would imagine the heated gloves would have been better.
With heated grips I wouldn't bother with heated gloves. With no heated grips I definitely would want the heated gloves. Given the either or nothing choice I would probably go for the heated gloves because hook up would be easier.

SBB



Title: Re: What did you do to or on your CVO today?
Post by: DesertHOG on January 03, 2015, 12:26:47 PM
It has been my experience that with the heated grip I need to wear the thinner gloves to be able to feel the grip heat. We left Charlotte headed for Daytona and the temp was 19*. My hands were fine but I would imagine the heated gloves would have been better.
With heated grips I wouldn't bother with heated gloves. With no heated grips I definitely would want the heated gloves. Given the either or nothing choice I would probably go for the heated gloves because hook up would be easier.

SBB


I guess it depends.  On my '11 the heated grips worked for shiite .. but on my '15 they get toasty on the 1-2 setting. Strange but true.

DH
Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on January 03, 2015, 02:28:53 PM
I guess it depends.  On my '11 the heated grips worked for shiite .. but on my '15 they get toasty on the 1-2 setting. Strange but true.

DH
My 11 FLTRUSE was the same, had to turn them to the highest setting and they barely got warm. My 15 FLTRUSE works exactly as you have stated, 1-2 setting. I noticed when I got my 13 CVO Ultra and 14 CVO Limited you only needed to use 1-2 setting. I'm thinking the MoCo changed something but my dealer is telling me they did not.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on January 03, 2015, 08:58:10 PM
I'm wondering how effective heated grips are in the extreme cold. I have a CVORK with no fairing and the backs of my hands are not protected from the elements. I'm thinking that heated gloves are a better choice for this situation because both the palm side and back side are heated.

I put 14" Monkey bars on my 13 SERK, when I did I had the heated grips for a 13 CVO Ultra installed as it was same grip design.  They work well, but in extreem cold I still need heated gloves due to the back of my hands.

My 15 SERGU has the heated  grips, 2 is as high as I can stand, same with the ones on the SERK.  They are really nice in moderate weather, as you do not need heated gloves until under 40 or so.

Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on January 04, 2015, 12:05:51 AM
I cleaned it!   Boy,, sure needed it bad. :nervous:
Title: Re: What did you do to or on your CVO today?
Post by: YELLOWBIRD on January 04, 2015, 08:10:10 AM
I have Heated Gloves, heat demons and back in November I added more hand protection for the cold winter!


YB

Title: Re: What did you do to or on your CVO today?
Post by: YELLOWBIRD on January 04, 2015, 08:12:43 AM
Another shot.

Also, had to get them color matched as well!


YB

Title: Re: What did you do to or on your CVO today?
Post by: YELLOWBIRD on January 04, 2015, 08:14:22 AM
Last one.


 :2vrolijk_21:

YB




Title: Re: What did you do to or on your CVO today?
Post by: Twism_23 on January 04, 2015, 07:59:23 PM
Mocked up my 14" Carlini Flying Apes. Plan on installing them next week.
Title: Re: What did you do to or on your CVO today?
Post by: CVODON on January 04, 2015, 08:24:38 PM
Installed my 1.75 Fulsac baffles with screens.
Title: Re: What did you do to or on your CVO today?
Post by: WJS on January 05, 2015, 04:00:39 AM
Burned a tank of gas!!!
Title: Re: What did you do to or on your CVO today?
Post by: Doubletap on January 05, 2015, 03:35:15 PM
Ordered stretched bags and rear fender, 12" apes and extended cables/lines.
Title: Re: What did you do to or on your CVO today?
Post by: KY-SESG on January 05, 2015, 09:44:10 PM
Mercury topped out at 26 today.  I took the opportunity to remove the warning stickers from the AC and engine guard. Also removed the reflectors from the fork lowers. My cheapest mod yet ;D
Title: Re: What did you do to or on your CVO today?
Post by: OBB on January 05, 2015, 09:56:26 PM
Mercury topped out at 26 today.  I took the opportunity to remove the warning stickers from the AC and engine guard. Also removed the reflectors from the fork lowers. My cheapest mod yet ;D
I cheat on mine, I flip the AC cover upside down to leave the sticker on it. lol
Title: Re: What did you do to or on your CVO today?
Post by: Twism_23 on January 08, 2015, 03:26:15 PM
Installed a set of progressive 422's this morning. I lowered the back end about 3/4 to an inch. I will set the preload tomorrow.
Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on January 08, 2015, 04:32:20 PM
Hey CVOSJOE,
Yeah I agree the black looks much better. I do not own a Road Glide but am considering one in a year or two. Being the uneducated softtail rider that I am what is the purpose of the vents. I can see the pros of the vent covers...besides looks it may stop the splattering of birds and bugs inside the vents making any guts easier to access and clean. But it appears to restrict the air flow surface area by at least 50%.  Might it also stop or restrict the passage of air to the rider thereby affecting rider comfort on hot summer days or maybe even affect areodynamics in some strange way creating wind turbulence, noise or even vibration? I assume you have done some higher speed riding to make sure nothing out of the ordinary has developed. Probably everything is fine...but like I said I do not own one but am very interested.

I have rode it on the interstate and there is no noticeable difference in sound or turbulence.
Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on January 08, 2015, 04:36:06 PM
Think the honeycomb screen looks the best with the black powder coating.


Title: Re: What did you do to or on your CVO today?
Post by: jachd17 on January 08, 2015, 05:00:44 PM
Added some hog tunes speakers :bananarock:
Title: Re: What did you do to or on your CVO today?
Post by: Ridgerunr on January 08, 2015, 05:17:55 PM
Think the honeycomb screen looks the best with the black powder coating.

That was fast, looks great.
Joe is no fair weather rider, when I saw him @ noon.....on his bike, it was 18 deg. out.  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: DesertHOG on January 08, 2015, 06:23:14 PM
Think the honeycomb screen looks the best with the black powder coating.

Nice bug catchers you got there.

Title: Re: What did you do to or on your CVO today?
Post by: 2 ROSE on January 09, 2015, 12:56:52 AM
I have rode it on the interstate and there is no noticeable difference in sound or turbulence.

Ok thanks Joe. I will keep it in mind for future reference. The black does look great!
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on January 10, 2015, 07:07:15 AM
Joe, as in CVOSJOE, Myron and my self went for a nice ride yesterday, it was 25 when we started out with a high of 37.  Nice ride through the curvey East TN roads, a good lunch stop.  Ended up being a 304 mile day for me.

Have a little over 7100 miles on the 15 SERGU now.
Title: Re: What did you do to or on your CVO today?
Post by: Ridgerunr on January 10, 2015, 10:30:44 AM
FLSTFI Dave is another one that doesn't let the cold get in the way of getting out.  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Ohio phil on January 11, 2015, 07:03:47 AM
Hey Paul happy new year that yellow bird is looking good man!!
Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on January 11, 2015, 10:17:28 AM
Joe, as in CVOSJOE, Myron and my self went for a nice ride yesterday, it was 25 when we started out with a high of 37.  Nice ride through the curvey East TN roads, a good lunch stop.  Ended up being a 304 mile day for me.

Have a little over 7100 miles on the 15 SERGU now.

 :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: YELLOWBIRD on January 11, 2015, 10:32:37 AM
 :nixweiss:
Hey Paul happy new year that yellow bird is looking good man!!


THANKS Phil!
Back at you and mamma!
I know you did some motor upgrades, how's the old girl running?


YB
Title: Re: What did you do to or on your CVO today?
Post by: Lever on January 16, 2015, 09:20:09 AM
Shipped bike parts to be painted approximately 6week's
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on January 17, 2015, 06:57:47 AM
Went for a short ride yesterday, almost 160 miles.  Dropped some vent screens off at the powder coater for my bike and for my wife bike.

Plan to take a nice ride today, should hit a high of 57.
Title: Re: What did you do to or on your CVO today?
Post by: J.Mart60 on January 17, 2015, 04:32:27 PM
Temps is the low 70's, tank of gas gone, bourbon on the rocks.....priceless!
Title: Re: What did you do to or on your CVO today?
Post by: TXGator on January 17, 2015, 05:18:55 PM
Just stretched her legs a bit on a 150 mile ride today..  Stopped in High Springs FL for lunch then back to the Hacienda... 

Nice day..
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on January 17, 2015, 06:05:32 PM
Temps is the low 70's, tank of gas gone, bourbon on the rocks.....priceless!
Nice, I hope to experience the same in two weeks.
Title: Re: What did you do to or on your CVO today?
Post by: martys on January 17, 2015, 07:32:00 PM
Trailered about 2 miles down the shore of Lake Erie for a photo shoot for a CVO Calender for 2016   :2vrolijk_21:  My 2000 Triple Red will be the December Photo  :coolblue:


Marty
Title: Re: What did you do to or on your CVO today?
Post by: martys on January 17, 2015, 07:36:35 PM
more
Title: Re: What did you do to or on your CVO today?
Post by: martys on January 17, 2015, 07:38:13 PM
one more
Title: Re: What did you do to or on your CVO today?
Post by: North Georgia Hawg on January 17, 2015, 08:07:32 PM
It was in the high 50s and  :sunny: here in north Georgia for the first time in quite awhile - so some friends and I rode up to Dahlonega and had a feast at The Smith House there. They serve a bunch of meats and sides family style, all you can eat. We all stuffed ourselves on fried chicken, ham, roast beef, mac and cheese, fried okra, greens, creamed corn, green beans, smashed taters, cole slaw, rolls, cornbread... and strawberry shortcake for dessert! I might not eat again for a week.  :o

Of course, I wore my recently-purchased SE Raceway jacket, just to show it off!  8)

What a way to start the 2015 riding season!  :2vrolijk_21:

Ken
Title: Re: What did you do to or on your CVO today?
Post by: Bigfoot16 on January 17, 2015, 10:54:06 PM
Took Guido for a nice ride today. Temps in the mid 50's in southern Indiana. Felt great for January
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on January 18, 2015, 07:50:29 AM
Went for a nice 282 mile ride yesterday, started out at 29 degrees, but was soon in Mid 50's.  Had a really nice ride.  Then had a nice dinner at home with a glass of Bourbon on the rocks.

Think I will ride again today. 
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on January 18, 2015, 08:51:53 AM
more






heh  I can see a caption game for this pic.






Seriously though, great photo Marty!   :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: DesertHOG on January 18, 2015, 10:00:37 AM
(http://tapatalk.imageshack.com/v2/15/01/18/8c27eba7aaa8b244f04174b261996c78.jpg)

Took a ride to Santa Fe Harley on Saturday, a balmy 51oF.



Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Puma on January 18, 2015, 10:30:28 AM
I need to move.
Title: Re: What did you do to or on your CVO today?
Post by: Mano on January 18, 2015, 11:32:01 AM
one more

Ya baby. Nothing like a great Canadian winter.  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: martys on January 18, 2015, 11:47:48 AM
Ya baby. Nothing like a great Canadian winter.  :2vrolijk_21:
Can't swim in a frozen lake ... Can't ride on the frozen roads  :(





heh  I can see a caption game for this pic.






Seriously though, great photo Marty!   :2vrolijk_21:
Just Day Dreaming about riding  :)
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on January 18, 2015, 12:05:10 PM
Not much, just checked and adjusted the air pressure in the tires, and covered it back up. 
I definitely need to buy a jack.
Title: Re: What did you do to or on your CVO today?
Post by: cambo on January 18, 2015, 12:09:25 PM
Walked past it to install the Fullsac pipes on the non-CVO Limited! Need to figure out if I should hang on to the Breakout or trade it in on a CVO SG. The BO is the coolest looking bike ever (IMVHO) but a bagger is just so dang comfy. Maybe I need to admit that I am too old to be riding cool bikes anymore. :(
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on January 18, 2015, 12:23:05 PM
Walked past it to install the Fullsac pipes on the non-CVO Limited! Need to figure out if I should hang on to the Breakout or trade it in on a CVO SG. The BO is the coolest looking bike ever (IMVHO) but a bagger is just so dang comfy. Maybe I need to admit that I am too old to be riding cool bikes anymore. :(
Never too old for a cool bike!
Title: Re: What did you do to or on your CVO today?
Post by: Lars on January 18, 2015, 12:42:02 PM
Walked past it to install the Fullsac pipes on the non-CVO Limited! Need to figure out if I should hang on to the Breakout or trade it in on a CVO SG. The BO is the coolest looking bike ever (IMVHO) but a bagger is just so dang comfy. Maybe I need to admit that I am too old to be riding cool bikes anymore. :(

Never too old to ride COOL BIKES!
That's what keeps us young (At Heart).
Title: Re: What did you do to or on your CVO today?
Post by: Ohio phil on January 18, 2015, 02:55:56 PM
It's running good Paul I was telling someone yesterday about meeting up with you in Maggie Valley and riding all the way up the parkway to Virginia nice ride we need to do it again 
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on January 19, 2015, 07:11:31 AM
Went for two rides yesterday.  Took the CVO King out for a morning ride, put 127 miles on her.  She has been feeling neglected.

Came home, then at Noon the wife and on got on the Road Glides and went for a 116 mile ride.  It was mid 50's in the afternoon so it was really nice.

Suppose to hit 59 today, so I will be riding again.
Title: Re: What did you do to or on your CVO today?
Post by: Mr. Warlock on January 19, 2015, 11:03:42 AM
Did about 180 miles yesterday, the high was about 56, nice ride.

Then came home and started pondering the next mods, before I knew it I was asleep....lmao.
Title: Re: What did you do to or on your CVO today?
Post by: jachd17 on January 19, 2015, 02:34:11 PM
You guys DO realize that every time I read of somebody being able to go for a ride at this time of the year it's just another "twist of the knife".....just sayin.
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on January 19, 2015, 07:21:42 PM
You guys DO realize that every time I read of somebody being able to go for a ride at this time of the year it's just another "twist of the knife".....just sayin.

True but then us northern fellas get to work on the wife's Cooking Vessel Organizers:
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on January 19, 2015, 07:23:17 PM
Mod season is not just for the bike apparently.....
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on January 19, 2015, 07:26:40 PM
I did also install some Custom Dynamics Dynamic rings and rear turn signal LED's on the bike. I'm pretty sure others will see me approach now.
Title: Re: What did you do to or on your CVO today?
Post by: jachd17 on January 19, 2015, 07:37:22 PM
True but then us northern fellas get to work on the wife's Cooking Vessel Organizers:

   Clever 8)   Nice work B.T.W.
Title: Re: What did you do to or on your CVO today?
Post by: 2 ROSE on January 19, 2015, 11:09:19 PM
Went to the dealer today to visit Rose. They let me stop by whenever I need to...they understand.  :( ...sniffle
Title: Re: What did you do to or on your CVO today?
Post by: martys on January 19, 2015, 11:27:52 PM
Went to the dealer today to visit Rose. They let me stop by whenever I need to...they understand.  :( ...sniffle
I can't believe they store it on it's side that way  :nervous: :nervous: :nervous:  :drink:

Marty
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on January 20, 2015, 07:10:59 AM
Did a nice 300 mile ride on nice twisty roads of east TN again yesterday.  We had a high of 62, was 27 when I pulled out of garage in the am for the ride.

Looks like that was my last ride for four weeks as I have to go back to work a week early.  When I get back I should have the RG Special lower rear fender facia back from the painter to install.  Will also have the vent screens back from powder coater to install. 
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on January 20, 2015, 08:07:44 AM
Did a nice 300 mile ride on nice twisty roads of east TN again yesterday.  We had a high of 62, was 27 when I pulled out of garage in the am for the ride.

Looks like that was my last ride for four weeks as I have to go back to work a week early.  When I get back I should have the RG Special lower rear fender facia back from the painter to install.  Will also have the vent screens back from powder coater to install.


Dave, just curious, did you make your screens or buy them? Saw the KW screens but would have to have them powder coated as the chrome version isn't me.
Title: Re: What did you do to or on your CVO today?
Post by: 2 ROSE on January 20, 2015, 12:19:01 PM
I can't believe they store it on it's side that way  :nervous: :nervous: :nervous:  :drink:

Marty

Hey Marty,
Yeah I know it appears to be that way but in reality it is just due to my computer expertise...or the lack thereof. Rest assured it was upright while I was there otherwise I would have been doing a little more than just sniffling.
Thank you though for your concern.  :)
Stay Safe!!!
Title: Re: What did you do to or on your CVO today?
Post by: OBB on January 20, 2015, 04:12:21 PM

Dave, just curious, did you make your screens or buy them? Saw the KW screens but would have to have them powder coated as the chrome version isn't me.
Am I missing something G? Did you get a new bike or are you still contemplating it?
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on January 20, 2015, 04:20:44 PM
Am I missing something G? Did you get a new bike or are you still contemplating it?




Well lets just say there's a very very strong chance I'll be a Shark convert very soon.  ;D




Doing my add-on/mod research ahead of time.
Title: Re: What did you do to or on your CVO today?
Post by: SBB on January 20, 2015, 04:33:42 PM



Well lets just say there's a very very strong chance I'll be a Shark convert very soon.  ;D



.


Tease!

SBB





Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on January 20, 2015, 04:55:29 PM

Tease!

SBB










LOL  yep
Title: Re: What did you do to or on your CVO today?
Post by: OBB on January 20, 2015, 08:44:44 PM



Well lets just say there's a very very strong chance I'll be a Shark convert very soon.  ;D




Doing my add-on/mod research ahead of time.
I've got some perforated aluminum to make some screen out of. Just need to get a warm enough day to tear the faring apart and get on it.
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on January 20, 2015, 09:23:29 PM
I've got some perforated aluminum to make some screen out of. Just need to get a warm enough day to tear the faring apart and get on it.




Cool    :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on January 20, 2015, 10:28:42 PM

Dave, just curious, did you make your screens or buy them? Saw the KW screens but would have to have them powder coated as the chrome version isn't me.

Joe made the first ones, and from I used them as a template.  Cut some for my wife's bike and mine, they are at powder coater now.  Way less money than the Kockwerks ones.


Well lets just say there's a very very strong chance I'll be a Shark convert very soon.  ;D

Doing my add-on/mod research ahead of time.
Would be a smart conversion.

My wife has never liked the looks of the road glide, and has rode several of mine.  She has always had street glides.  She rode the 15 RG Special and has one now, with over 5K on it already.  She says she still does not like the looks, but it sure rides and handles better.
Title: Re: What did you do to or on your CVO today?
Post by: 2 ROSE on January 20, 2015, 11:39:15 PM

My wife has never liked the looks of the road glide, and has rode several of mine.  She has always had street glides.  She rode the 15 RG Special and has one now, with over 5K on it already.  She says she still does not like the looks, but it sure rides and handles better.

Damn Dave...I'm jealous. You have a wife who rides a road glide...your a lucky man.  I would like to be as lucky but I don't know where to start. Should I start with the wife or the road glide? Hmmm...
 :)
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on January 21, 2015, 09:13:39 AM
Damn Dave...I'm jealous. You have a wife who rides a road glide...your a lucky man.  I would like to be as lucky but I don't know where to start. Should I start with the wife or the road glide? Hmmm...
 :)

The road glide would be cheaper for ya in the long run, Rose......
Title: Re: What did you do to or on your CVO today?
Post by: Born2Live on January 21, 2015, 08:00:17 PM
Picked up my personalized plates today!!!
(http://tapatalk.imageshack.com/v2/15/01/21/48932da3dca19af4ac23b1e05d39d399.jpg)


Sent from my iPad using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on January 21, 2015, 08:23:43 PM
Damn Dave...I'm jealous. You have a wife who rides a road glide...your a lucky man.  I would like to be as lucky but I don't know where to start. Should I start with the wife or the road glide? Hmmm...
 :)

When we got married she did not ride.  After many years of marriage and raising three girls, when the youngest moved out in April of 07 she took the motor cycle safety course.  She then decided she really loves riding.  She has over 200,000 miles under her belt now.  She averages just over 30K miles a year.

The road glide would be cheaper for ya in the long run, Rose......

Lots cheeper.  Since 07 she has cost me a 07 883 sportster, a 09 Heritage which she still has, a 11 Street Glide, a 13 Street Glide and now a 15 Road Glide special and custom paint for it.

Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on January 22, 2015, 06:32:56 PM
Picked up my personalized plates today!!!
(http://tapatalk.imageshack.com/v2/15/01/21/48932da3dca19af4ac23b1e05d39d399.jpg)


Sent from my iPad using Tapatalk
What part of STL do you live?
Title: Re: What did you do to or on your CVO today?
Post by: OBB on January 22, 2015, 06:39:30 PM
Made some vent screens. They're off to be painted already. Also found out there isn't much room under the hood of these things. I hope everyone is happy with the stock sound system or you'll be getting rid of the CB.
(http://i275.photobucket.com/albums/jj306/ohiobellboy/2015%20Road%20Glide%20Ultra/Vent%20screen_zps2lcvzf29.jpg) (http://s275.photobucket.com/user/ohiobellboy/media/2015%20Road%20Glide%20Ultra/Vent%20screen_zps2lcvzf29.jpg.html)

(http://i275.photobucket.com/albums/jj306/ohiobellboy/2015%20Road%20Glide%20Ultra/Vent%20screen%202_zpsdqx6cwqv.jpg) (http://s275.photobucket.com/user/ohiobellboy/media/2015%20Road%20Glide%20Ultra/Vent%20screen%202_zpsdqx6cwqv.jpg.html)

(http://i275.photobucket.com/albums/jj306/ohiobellboy/2015%20Road%20Glide%20Ultra/15%20RGU_zpsnycm903p.jpg) (http://s275.photobucket.com/user/ohiobellboy/media/2015%20Road%20Glide%20Ultra/15%20RGU_zpsnycm903p.jpg.html)
Title: Re: What did you do to or on your CVO today?
Post by: jonny cash on January 22, 2015, 07:48:57 PM
I gave my '04 seeg a little updated look in the wheel department.  I scored a front wheel off an '09 cvo roadglide, and added some new galfer wave rotors.  I really like how it turned out.
Title: Re: What did you do to or on your CVO today?
Post by: Rooster on January 22, 2015, 08:43:40 PM
Replaced the compensator and rotor...preparing for the Valley!

 :2vrolijk_21:
What? I always thought you traded soon enough to escape those issues. :huepfenlol2:
Title: Re: What did you do to or on your CVO today?
Post by: Jock on January 22, 2015, 08:59:33 PM
What? I always thought you traded soon enough to escape those issues. :huepfenlol2:

It just so happened that I traded right after that....It was covered under the ESP!

 :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: GregKhougaz on January 22, 2015, 11:35:52 PM
I gave my '04 seeg a little updated look in the wheel department.  I scored a front wheel off an '09 cvo roadglide, and added some new galfer wave rotors.  I really like how it turned out.

Jealous!   >:(   I miss the Blade wheels from my SERG3!    :P
Title: Re: What did you do to or on your CVO today?
Post by: North Georgia Hawg on January 23, 2015, 12:10:25 AM
I LOVE this thread! So much BADASSNESS here!

I finally figgered out that it's WAAAY cheaper to let my wife just ride her little Candy Lime Green 2012 Kawi Ninja 650 than it would EVER be to keep her (unhappily) on any Harley.

Only took FIVE bikes to reach the conclusion that she's much happier on a $6000 one...

Ken
Title: Re: What did you do to or on your CVO today?
Post by: willyB on January 23, 2015, 06:25:18 AM
Picked up my personalized plates today!!!
(http://tapatalk.imageshack.com/v2/15/01/21/48932da3dca19af4ac23b1e05d39d399.jpg)


Sent from my iPad using Tapatalk
Very Cool!
Title: Re: What did you do to or on your CVO today?
Post by: Lever on January 23, 2015, 02:05:48 PM
Nice
Title: Re: What did you do to or on your CVO today?
Post by: Cat Eye on January 23, 2015, 05:56:54 PM
13" apes and Heat Demons.....what was I thinking.....next time I will write a check! :'(
Title: Re: What did you do to or on your CVO today?
Post by: willyB on January 23, 2015, 06:27:34 PM
13" apes and Heat Demons.....what was I thinking.....next time I will write a check! :'(
Been there. even my close friends won't come over.

Good luck! You'll appreciate it even more when you're done.
Title: Re: What did you do to or on your CVO today?
Post by: Born2Live on January 24, 2015, 07:09:23 AM

What part of STL do you live?
im out in west county


Sent from my iPad using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Lars on January 24, 2015, 07:31:41 AM
Cat Eye, That picture reminds me of the time a buddy and I tore down the tranny of his '29 Chevy on his kitchen table. Needless to say it was not a pretty site, and his wife never ever forgave us. There may have been a little bit of alcohol consumed that contributed to the problem!!
Title: Re: What did you do to or on your CVO today?
Post by: GregKhougaz on January 25, 2015, 10:33:26 PM
Special "CVO" day for me today.  Got to take my 86 year old Father for a ride to show off my new RG Ultra.  80* for most of the ride.  Dad just lost his second wife and I think he has more dates lined up than I!     :coolblue:
Title: Re: What did you do to or on your CVO today?
Post by: 2 ROSE on January 26, 2015, 02:31:18 AM
Wow, great picture!!!
You are both very lucky to have each other.
God Bless and Stay Safe!
Title: Re: What did you do to or on your CVO today?
Post by: BUCKNUT GREG on January 26, 2015, 08:26:59 AM
Wow, great picture!!!
You are both very lucky to have each other.
God Bless and Stay Safe!

Could not have said it better  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on January 26, 2015, 08:29:02 AM







As I said in the other thread, GREAT picture of a great moment in time.  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: martys on January 26, 2015, 08:54:20 AM
Special "CVO" day for me today.  Got to take my 86 year old Father for a ride to show off my new RG Ultra.  80* for most of the ride.  Dad just lost his second wife and I think he has more dates lined up than I!    :2vrolijk_21:
These are special moments in your life Greg  :2vrolijk_21:  Building life long memories is amazing  :coolblue: :coolblue:

Marty
Title: Re: What did you do to or on your CVO today?
Post by: Bigfoot16 on January 26, 2015, 10:54:03 AM
Special "CVO" day for me today.  Got to take my 86 year old Father for a ride to show off my new RG Ultra.  80* for most of the ride.  Dad just lost his second wife and I think he has more dates lined up than I!    :2vrolijk_21:

Great pic. Just lost my Dad at Christmas. Enjoy every second with yours.
Title: Re: What did you do to or on your CVO today?
Post by: GregKhougaz on January 26, 2015, 11:03:24 AM
Wow, great picture!!!
You are both very lucky to have each other.
God Bless and Stay Safe!

Very much so!  Thanks! 

As I said in the other thread, GREAT picture of a great moment in time.  :2vrolijk_21:

Thanks.  Definitely was counting my blessings yesterday.

These are special moments in your life Greg  :2vrolijk_21:  Building life long memories is amazing  :coolblue: :coolblue:

Marty

Thanks Marty!   My goal is to rent a trike for the day for him to drive.   
Title: Re: What did you do to or on your CVO today?
Post by: Trapperdog on January 26, 2015, 11:15:31 AM
That's great Greg. I was able to give my dad his first and last ride 41 years ago before he passed. Pretty neat that your dad is still around for you both to create these memories.
Title: Re: What did you do to or on your CVO today?
Post by: custodn on January 26, 2015, 02:01:07 PM
Took a ride down the coast of California.
Title: Re: What did you do to or on your CVO today?
Post by: GregKhougaz on January 26, 2015, 07:29:03 PM
Took a ride down the coast of California.
If that was SoCal, you should have said hello!
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on January 26, 2015, 09:34:46 PM
Special "CVO" day for me today.  Got to take my 86 year old Father for a ride to show off my new RG Ultra.  80* for most of the ride.  Dad just lost his second wife and I think he has more dates lined up than I!    :2vrolijk_21:

Very cool picture.  Cool your dad would ride with you.  Doubt I could get my dad to ride with me.  I do enjoy every minute I can spend with him, especially since we lost mom the first week of June this year.  They were married 55 years.
Title: Re: What did you do to or on your CVO today?
Post by: Reddog303 on January 27, 2015, 01:55:59 AM
That is a special pic yes I don't think my dad would ever ride with me heck took him 10 years to stop telling me how to drive. Today was a special day in the great white north 64 degrees and sunny post bike show (weekend) had the day off so insured and put 175 miles on the new blue RGU. Guy at the light said " what brand of bike is that "I smiled and said the "only one" .. great day ...oh and the RGU was a smash at the bike show even in Abyss blue... ;) ;)
Title: Re: What did you do to or on your CVO today?
Post by: TXGator on January 27, 2015, 06:47:34 PM
Bought the better half a "15 Heritage Classic to keep some of the miles off of Justice...
Title: Re: What did you do to or on your CVO today?
Post by: Twism_23 on January 27, 2015, 09:56:47 PM
Bought a set of D&D Low Cat Wrapped performance baffle exhaust.
Title: Re: What did you do to or on your CVO today?
Post by: Royalroadie on January 28, 2015, 08:21:36 PM
Logged 124 miles on the SESG.  A beautiful 73 degree day in Kansas City!
Title: Re: What did you do to or on your CVO today?
Post by: Born2Live on January 28, 2015, 10:14:33 PM
My wheel dock wheel chock arrived today!  Can't wait to try this bad boy out!(http://tapatalk.imageshack.com/v2/15/01/28/e1b6f1ce7eb3a2aaf671555bb7139cf9.jpg)


Sent from my iPad using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: cmashark on January 29, 2015, 08:48:01 PM
spent about an hour thinking about it...  bout all I can do with it out to sea. :(
Title: Re: What did you do to or on your CVO today?
Post by: OBB on January 29, 2015, 09:12:17 PM
Installed my caliper mounted fog lights. Updated the BOOM system. Installed my vent screens. Installed the switch assembly for aux switches on the left side of the dash.
Title: Re: What did you do to or on your CVO today?
Post by: jamnflhxse2 on January 29, 2015, 09:42:15 PM
My wheel dock wheel chock arrived today!  Can't wait to try this bad boy out!(http://tapatalk.imageshack.com/v2/15/01/28/e1b6f1ce7eb3a2aaf671555bb7139cf9.jpg)


Sent from my iPad using Tapatalk
Got 2 in my trailer, they work flawless!!
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on January 29, 2015, 10:00:11 PM
spent about an hour thinking about it...  bout all I can do with it out to sea. :(

Naw, I think about mine when out to sea, and I have been known to order parts for it while out to sea.  Heck, even bought my wife a new bike while out at sea working.
Title: Re: What did you do to or on your CVO today?
Post by: cheeset202 on January 30, 2015, 06:21:44 AM
2014 CVO Limited upgrade.......installed tour pak docking station, curved license plate holder, hidden fairing mount antenna, new custom seat, got a limited for touring and a SG for cruising!  Does anyone know how to remove the antenna stud on the tour pak, thought it would just unscrew but that  does not seem to be the case?
Title: Re: What did you do to or on your CVO today?
Post by: Boatman on January 30, 2015, 07:56:04 AM
Does anyone know how to remove the antenna stud on the tour pak, thought it would just unscrew but that  does not seem to be the case?

Remove antenna lead from inside tour pack.
Loosen thin nut inside tour pack on antenna wire lead stud.
Find a 1/2" fine thread nut and jam it against thin nut.
With the 2 nuts locked together, screw the antenna lead post out enough so you can then lift the antenna post out of the outside of the tourpack.
You can take the inside lead post all of the way out of the tourpack or just enough to lift the outside post up and out of the way.

CB post-the inside lead post has a allen recess cut into it.  Find the right size allen and screw that small lead psot out until you can remove the outside post.

Basically the inside wire lead posts have a indention on them that retains the outside posts that the antennas screw onto. 
Title: Re: What did you do to or on your CVO today?
Post by: cheeset202 on January 30, 2015, 07:00:06 PM
Boatman, thanks for the help, makes sense now, I looked at the antenna lead post inside the tour pak and could not figure out the rest!  This will complete my project to 100%.  I know I will probably look at putting the saddlebag speakers in next.  I should have been patient and waited until the 2015 CVO SG to come out and just added the Tour pak.  Probably all comes out to the same $'s in the end. I swore when I bought the CVO Limited I would not have to do anything to it besides the pipes, and street tuner.  I guess I just can't help giving HD my money!   Ride safe.
Title: Re: What did you do to or on your CVO today?
Post by: T-Roy on January 30, 2015, 07:50:35 PM
Had some custom work done on the backrest cover.
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on January 30, 2015, 07:55:29 PM
Had some custom work done on the backrest cover.

Very nice!  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Lever on January 30, 2015, 09:36:59 PM
Looks great
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on January 31, 2015, 09:37:25 AM
Had some custom dynamics turn signal lights laying around in the junk drawer.  I used to use them before I went with passing lamps,,,  I had nothing to do the other night,, so I put them back in.   8)
Title: Re: What did you do to or on your CVO today?
Post by: FLHTCUSE7 on January 31, 2015, 11:01:10 AM
Updated to the latest firmware for the infotainment system.
Title: Re: What did you do to or on your CVO today?
Post by: GregKhougaz on January 31, 2015, 07:49:13 PM
Mark and I fixed a glitch in his passing lamp wiring this morning. Then headed to the dealer to see if we could get my bike to accept text messages. After unpairing and re pairing the phone and pulling the main fuse it now works!  Still have no speed control volume, however.

Then we had to ride on this beautiful Southern California day.  The paint looks terrific in the Sun!
Title: Re: What did you do to or on your CVO today?
Post by: GregKhougaz on January 31, 2015, 07:50:08 PM
And Mark:
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on January 31, 2015, 09:00:49 PM
Mark and I fixed a glitch in his passing lamp wiring this morning. Then headed to the dealer to see if we could get my bike to accept text messages. After unpairing and re pairing the phone and pulling the main fuse it now works!  Still have no speed control volume, however.

Then we had to ride on this beautiful Southern California day.  The paint looks terrific in the Sun!

What type phone?  I'm still being told by customer service the iPhone 6 will not display text, and its a iPhone 6 issue, not HD.
Title: Re: What did you do to or on your CVO today?
Post by: GregKhougaz on January 31, 2015, 11:08:47 PM
What type phone?  I'm still being told by customer service the iPhone 6 will not display text, and its a iPhone 6 issue, not HD.

Samsung Galaxy S5
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on February 01, 2015, 08:53:55 PM
Samsung Galaxy S5

Ok, my wife's note 4 works fine.  Cant get the iPhone 6 to do the text, everything else works.
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on February 02, 2015, 08:00:03 AM
Ok, my wife's note 4 works fine.  Cant get the iPhone 6 to do the text, everything else works.
If I remember right if you turn off  imessages in your phone settings it will work. At least it's worth a shot trying it with the iPhone set that way.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on February 02, 2015, 08:40:04 PM
If I remember right if you turn off  imessages in your phone settings it will work. At least it's worth a shot trying it with the iPhone set that way.

I have tired that.  Even un paired and repaired it with iMessage off.  That worked on older iPhones but not the 6.
Title: Re: What did you do to or on your CVO today?
Post by: 15CVOSG on February 02, 2015, 09:29:16 PM
2015 CVO Street Glide ..... Added the CB module and J&M Hidden CB antenna ... haven't had the chance to test it ... but all plug and play ...
Title: Re: What did you do to or on your CVO today?
Post by: T-Roy on February 03, 2015, 07:21:33 PM
Harley dealer was having a 50 dollar special on a safety inspection and complete bike detailing, my bike needed a coat of wax and I really did not feel like doing it in the cold, so I brought it in. I asked them to listen to the compensator while they had it in the back because I thought I was hearing signs of wear, the bike has 25,000 miles on it, and my 2 year factory warranty runs out in April. Sure enough the compensator was worn. So today I got a complete detail and a new compensator for 62  dollars and change after taxes. I am really pleased because I am going to have a 113 cubic inch build done this spring and was going to get a new compensator then. It was also awesome that they were able to jump right on it and everything was done today while I waited.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on February 03, 2015, 08:56:50 PM
2015 CVO Street Glide ..... Added the CB module and J&M Hidden CB antenna ... haven't had the chance to test it ... but all plug and play ...
Did you do the work or have the dealer?  How hard was it to install?  Thinking about adding CB to my wife's 15 RG Special.  How about the handle bar switch was that easy?  Thanks
Title: Re: What did you do to or on your CVO today?
Post by: 15CVOSG on February 03, 2015, 10:46:07 PM
Did you do the work or have the dealer?  How hard was it to install?  Thinking about adding CB to my wife's 15 RG Special.  How about the handle bar switch was that easy?  Thanks

the 15' cvo sg has the PTT switch and the 7 pin din connection for headset ... cb module was plug and play and used the J&M CB flexpower antenna ... smooth sailing ...
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on February 04, 2015, 08:43:29 PM
the 15' cvo sg has the PTT switch and the 7 pin din connection for headset ... cb module was plug and play and used the J&M CB flexpower antenna ... some sailing ...

Thanks.  I have already added the 7 pin Din connection for the head set so she can use phone and listen to music.
Title: Re: What did you do to or on your CVO today?
Post by: DesertHOG on February 05, 2015, 01:55:29 PM
Bought a set of Spooky Fast Handlebars - 12" Chrome for my 15 FLTRUSE. Goes into the shop this weekend for installation.

(http://cdn.shopify.com/s/files/1/0373/0193/products/IMG_8072_1024x1024_83d8ca7e-c839-4f95-b1f6-ec71d4e36cb4_1024x1024.png?v=1414712043)
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on February 05, 2015, 02:33:13 PM
Bought a set of Spooky Fast Handlebars - 12" Chrome for my 15 FLTRUSE. Goes into the shop this weekend for installation.

Hey Simon, I thought you were happy with the stock bars once you removed the pin and adjusted them.  What happened?
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on February 05, 2015, 02:50:00 PM





Cranked the bike for the first time since September; wife came out into the garage with a big grin and ready to ride. Time to clean off the cobwebs and get it in shape for warm days.  :bananarock:







Title: Re: What did you do to or on your CVO today?
Post by: OBB on February 05, 2015, 04:49:04 PM




Cranked the bike for the first time since September; wife came out into the garage with a big grin and ready to ride. Time to clean off the cobwebs and get it in shape for warm days.  :bananarock:








GO GO GADGETZ GO!!!!!!!!!!!!!!!!!!!!!


Sorry, couldn't resist.  :D
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on February 05, 2015, 05:19:24 PM
GO GO GADGETZ GO!!!!!!!!!!!!!!!!!!!!!


Sorry, couldn't resist.  :D




We have a HOG chapter ride this weekend and IF the weather is even close to warm enough (according to wife's standard) we'll be out for a ride.  :2vrolijk_21:



Title: Re: What did you do to or on your CVO today?
Post by: Reddog303 on February 05, 2015, 07:58:52 PM
I will say that MY 2015 CVO RGU handles better with a tour pack on than both my previous RG's did with it with them off...IMHO  ;) ;)
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on February 05, 2015, 08:43:17 PM
I will say that MY 2015 CVO RGU handles better with a tour pack on than both my previous RG's did with it with them off...IMHO  ;) ;)

I felt just the opposite.  I had a 09 SERG, then a 12 SERG, still have a 13 SERK and I thought my new 15 SERGU was the worst handling of all four bikes.  Had chopped tour packs on the 09 and the 12.

Now with good shocks, the Ohlin HD-159, it handles as good if not better even with the King tour Pack on.
Title: Re: What did you do to or on your CVO today?
Post by: DesertHOG on February 06, 2015, 10:10:10 AM
Hey Simon, I thought you were happy with the stock bars once you removed the pin and adjusted them.  What happened?

The  wrist angle on the HD stock handlebars is still too aggressive so I decided to make the change. Plus I got a $1000 credit with my dealer, so it became a no-brainer.

Simon
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on February 06, 2015, 10:19:29 AM
The  wrist angle on the HD stock handlebars is still too aggressive so I decided to make the change. Plus I got a $1000 credit with my dealer, so it became a no-brainer.

Simon

Fair enough....hope these new bars eliminate the wrist angle issues.  You know ya gotta post some pics once they are installed.... :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: 911Shark on February 06, 2015, 11:23:36 AM
On 2015 FLTRUSE  already had Freedom slip ons put on; today had cats cut out of stock hearder; put on Ness Stage 1 aircleaner; also replaced heatshield with MOCO mesh; then Barry at Kiwi Dynod it at 93HP and 113RWT. Went for a 100 miler after and love the new powere and no hot leg!
Title: Re: What did you do to or on your CVO today?
Post by: Mano on February 06, 2015, 06:55:50 PM
Dealer picked it up with a trailer to take her for repairs.  :(
Title: Re: What did you do to or on your CVO today?
Post by: 2 ROSE on February 06, 2015, 11:42:58 PM
Dealer picked it up with a trailer to take her for repairs.  :(

Hey Mano,
Hope its nothing serious...but if it is then I hope your ESP coverage pays for it.
Good Luck!
Title: Re: What did you do to or on your CVO today?
Post by: Mano on February 07, 2015, 07:57:33 AM
Hey Mano,
Hope its nothing serious...but if it is then I hope your ESP coverage pays for it.
Good Luck!

At almost 100 000 KM I am sure something will come up in the motor. The have found carbon build up at the top of the pistons. So far they had to replace the ABS module. The front brake lever was hitting the grip. Took about 3 or 4 pumps for it to come back. Both tires to be replaced. My 4th set and iPod harness was replaced. Somehow it got pinched by the tank the last time it was off. Will find out more on Tuesday what it will need.

And yes.....thank you lord for ESP. With all the problems that I have had.....ISH.
Title: Re: What did you do to or on your CVO today?
Post by: martys on February 07, 2015, 08:17:11 AM
At almost 100 000 KM I am sure something will come up in the motor. The have found carbon build up at the top of the pistons. So far they had to replace the ABS module. The front brake lever was hitting the grip. Took about 3 or 4 pumps for it to come back. Both tires to be replaced. My 4th set and iPod harness was replaced. Somehow it got pinched by the tank the last time it was off. Will find out more on Tuesday what it will need.

And yes.....thank you lord for ESP. With all the problems that I have had.....ISH.
100,00 Klicks on an '11  :o :o  Mano ... Man you put some serious saddle time in on that bike concidering the length of our riding season  :nixweiss:  Going to Dover on Friday?

Marty
Title: Re: What did you do to or on your CVO today?
Post by: BUCKNUT GREG on February 07, 2015, 08:40:34 AM
At almost 100 000 KM I am sure something will come up in the motor. The have found carbon build up at the top of the pistons. So far they had to replace the ABS module. The front brake lever was hitting the grip. Took about 3 or 4 pumps for it to come back. Both tires to be replaced. My 4th set and iPod harness was replaced. Somehow it got pinched by the tank the last time it was off. Will find out more on Tuesday what it will need.

And yes.....thank you lord for ESP. With all the problems that I have had.....ISH.
Dang Munga, slow down your racking up the KM's.  Hopefully they will find everything that needs to be fixed and replaced.
Hope the new season is good to you. 
Go Steelers  :bananarock:
Title: Re: What did you do to or on your CVO today?
Post by: MGCVO on February 07, 2015, 03:54:24 PM
Hi All,
I installed
Mustang solo seat
2 into 1 Rinehart “need to get custom map built in the spring”
Installed the Microphone in the dash pocket
K&N filter “because its red”
944 progressive shocks.
 I can’t wait for this winter to end!
Title: Re: What did you do to or on your CVO today?
Post by: Lars on February 07, 2015, 04:14:38 PM
Nice ride CVO23.
Keep on Chromin'.
Title: Re: What did you do to or on your CVO today?
Post by: Mano on February 07, 2015, 06:58:46 PM
100,00 Klicks on an '11  :o :o  Mano ... Man you put some serious saddle time in on that bike concidering the length of our riding season  :nixweiss:  Going to Dover on Friday?

Marty

I park it for 4 weeks every August too. ;D

Slow year last year too. Did about 20 000KM but will make up for it this year. Key West and Sturgis this year. :huepfenjump3:

Taking a half day from work and go have lunch in Dover. Hopefully it will be dry enough to ride there in March. :bananarock:
Title: Re: What did you do to or on your CVO today?
Post by: Mano on February 07, 2015, 07:00:48 PM
Dang Munga, slow down your racking up the KM's.  Hopefully they will find everything that needs to be fixed and replaced.
Hope the new season is good to you. 
Go Steelers  :bananarock:

Well like I said munga......thank you lord for ESP. They can keep fixing it and I will keep riding it. :2vrolijk_21:

Go Steelers Go. :bananarock:
Title: Re: What did you do to or on your CVO today?
Post by: CVO2FIXUP on February 07, 2015, 07:55:37 PM
 Installed my new killer SS V&H 2 into 1 pipe, powder coated a bunch of parts black, and installed a bunch of SS 12 point engine bolts. No more cheap ass chrome caps on engine bolts. Will install my 58MM TB and Merell injectors tomorrow. Just waiting for my Primo Rivera billet clutch and the new Baker comp so I can finish my primary side. Will post picks when the parts are in. Cheers.
Title: Re: What did you do to or on your CVO today?
Post by: CVO2FIXUP on February 07, 2015, 07:56:57 PM
 a nother
Title: Re: What did you do to or on your CVO today?
Post by: CVO2FIXUP on February 07, 2015, 07:57:56 PM
a nother
Title: Re: What did you do to or on your CVO today?
Post by: CVO2FIXUP on February 07, 2015, 07:58:53 PM
a nother
Title: Re: What did you do to or on your CVO today?
Post by: CVO2FIXUP on February 07, 2015, 07:59:57 PM
another
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on February 07, 2015, 08:17:54 PM
Rode mine (today).  That's all.  In a t-shirt.  In Missouri in February.  Doesn't get much better than that.  No damn bugs either.
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on February 07, 2015, 08:27:47 PM





We rode for a couple of hours. Great 65 degree weather here today.  :2vrolijk_21:


Supposed to be close to 70 tomorrow, may ride again.
Title: Re: What did you do to or on your CVO today?
Post by: GregKhougaz on February 08, 2015, 12:15:53 AM
Rode from Santa Monica, CA to Tombstone, AZ, Wednesday & Friday.  Left Tombstone this morning, 45*F. Rode through Globe to Apache Junction, 80*F.  Beautiful day in the Southwest!  Superstition Mountains in the background.
(http://tapatalk.imageshack.com/v2/15/02/07/bf40038c042d0e2fe85e45bc363941c8.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: GregKhougaz on February 08, 2015, 12:16:47 AM
Better shot of the Superstition Mountains. (http://tapatalk.imageshack.com/v2/15/02/07/e05d9301a4da4ef32b82acd366477984.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: SmokeyJoe on February 08, 2015, 04:18:31 PM
Polished some contrast cut pieces in my freezin a$$ garage till I could no longer feel my finger.  Man that was fun!
Title: Re: What did you do to or on your CVO today?
Post by: TinSpinner on February 08, 2015, 08:05:24 PM
Washed my bike today then blew it dry at 80 mph. Rode about 150 miles today, first time in a while. I feel it on my face tonight, the winter pale skin look has got to go!
Title: Re: What did you do to or on your CVO today?
Post by: Supershooter on February 08, 2015, 08:51:40 PM
Moved mine (half torn apart) across the shop in a clean up effort.
Supershooter
Title: Re: What did you do to or on your CVO today?
Post by: Lars on February 08, 2015, 09:09:11 PM
Looks like your project is coming along quite well.
Got my scoot out today and rode for about a 100 miles.
Sure felt good!!
Rode to the Acme Cafe and had a coke and bison burger!
Sure tasted good!!
Title: Re: What did you do to or on your CVO today?
Post by: Bigfoot16 on February 11, 2015, 08:34:15 AM
Rode it home from the dealership after having it in for a recall. Amazing, it was 43 degrees and with the heated seat and grips I was very comfortable at that temperature. This was impossible back when I rode a heritage softail. These CVO's sure can spoil you.
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on February 11, 2015, 08:41:26 AM
Rode mine (today).  That's all.  In a t-shirt.  In Missouri in February.  Doesn't get much better than that.  No damn bugs either.

One of my favorite things with ridin in the winter... :2vrolijk_21:

23 at the house this morning...nice, brisk ride into work. 
Title: Re: What did you do to or on your CVO today?
Post by: Enigmatic on February 11, 2015, 11:50:23 AM
I ordered T-Man cams, Fullsac DX and Cores, and 10.5:1 Pistons. Can't wait to see how this turns out!
Title: Re: What did you do to or on your CVO today?
Post by: T-Roy on February 11, 2015, 01:44:50 PM
I rode mine from home to Galveston Texas yesterday, about 300 miles. Parked her in the rented storage unit and flew offshore to work. When I fly back in from offshore on Feb. 25th I am riding to Fort Worth for Steve of GMR Performance to work his magic with a 113 cubic inch build.
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on February 11, 2015, 02:43:59 PM
I rode mine from home to Galveston Texas yesterday, about 300 miles. Parked her in the rented storage unit and flew offshore to work. When I fly back in from offshore on Feb. 25th I am riding to Fort Worth for Steve of GMR Performance to work his magic with a 113 cubic inch build.

Roy, Joevibe did that I believe and is really pleased with the results (along with a few others of our group).  After looking at all the options, if the 110 in Ginger ever goes away, I believe Steve will be a'workin his magic again for me.... :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: porthole on February 11, 2015, 05:04:48 PM
Picked up my chrome starter and after looking at it wondering if it is really such a great idea  :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: 2 ROSE on February 11, 2015, 06:59:34 PM
Picked up my chrome starter and after looking at it wondering if it is really such a great idea  :nixweiss:

Not sure but it is pretty.
Title: Re: What did you do to or on your CVO today?
Post by: Lars on February 11, 2015, 09:49:59 PM
Man, tiz perty!
If it works as nice as it looks, you've got a winner!!
 :2vrolijk_21:  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Mr. Warlock on February 12, 2015, 06:08:20 AM
This is gonna take more than 5 minutes, lol  :drummer:
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on February 12, 2015, 08:32:21 AM
This is gonna take more than 5 minutes, lol  :drummer:


Holly Molly at the bolts! Are those replacements for un-chromed bolts?
Title: Re: What did you do to or on your CVO today?
Post by: CVO2FIXUP on February 12, 2015, 05:10:03 PM
 My 2010 with the Stainless PRO PIPE all finished off. I must have saved 50 LBS with that pipe. Cant believe how heavy the Rineharts were. And man does it sound awesome.
Title: Re: What did you do to or on your CVO today?
Post by: CVO2FIXUP on February 12, 2015, 05:12:11 PM
Another.
Title: Re: What did you do to or on your CVO today?
Post by: guitarider on February 12, 2015, 05:39:44 PM
I have been so flippin busy at work the last few years and I finally have some spare time so I have several fun projects that I am starting tonite on my 07 CVO Ultra

1. Installing HID Bi-Xenon High and Low Beams, plus LED replacements for passing lamps.
2.  Finished my Homelink transmitter retrofit and will be installing, along with the three switches and LED in the lower left of the inner fairing. (Harley Odometer reset switches soldered into the PCB) and mounted inside the fairing.  Tap into Cig. lighter for power.
3. Installing the bypass harness to keep the passing lamps on with high-beams. 
4. Replacing the lamps in the small gauges with Superbright LED's so I actually see the gauges at night
5. Replacing all the handlebar control switch covers with Chrome ones.

I know its an older bike and I probably should forego all of this and buy a new one, but it only has 20K miles on it but I really enjoy it! I am armed with the Service Manual, a great new jack from Pitbull, Classic Rock XM station and plenty of beer!
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on February 12, 2015, 06:06:30 PM
This is gonna take more than 5 minutes, lol  :drummer:
That is what I need to do!
Title: Re: What did you do to or on your CVO today?
Post by: OBB on February 12, 2015, 08:04:09 PM
I have been so flippin busy at work the last few years and I finally have some spare time so I have several fun projects that I am starting tonite on my 07 CVO Ultra

1. Installing HID Bi-Xenon High and Low Beams, plus LED replacements for passing lamps.
2.  Finished my Homelink transmitter retrofit and will be installing, along with the three switches and LED in the lower left of the inner fairing. (Harley Odometer reset switches soldered into the PCB) and mounted inside the fairing.  Tap into Cig. lighter for power.
3. Installing the bypass harness to keep the passing lamps on with high-beams. 
4. Replacing the lamps in the small gauges with Superbright LED's so I actually see the gauges at night
5. Replacing all the handlebar control switch covers with Chrome ones.

I know its an older bike and I probably should forego all of this and buy a new one, but it only has 20K miles on it but I really enjoy it! I am armed with the Service Manual, a great new jack from Pitbull, Classic Rock XM station and plenty of beer!
Sounds like you have a plan  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on February 12, 2015, 09:48:09 PM
Picked up my chrome starter and after looking at it wondering if it is really such a great idea  :nixweiss:

My 09 SERG the paint started coming off the starter when the bike was a few months old.  Dealer said it would be replaced under warranty.  I asked if they would put a chrome one in if I paid the difference.  They agreed to that, so the chrome was put in.  Had over 40K on that starter when I traded the bike, no issue and still looked great.
Title: Re: What did you do to or on your CVO today?
Post by: Mr. Warlock on February 13, 2015, 07:05:39 AM

Holly Molly at the bolts! Are those replacements for un-chromed bolts?

Yes, all polished or show polished from Alloy Bolts, mostly all show polished. Some not available for these newer touring models so having to supplement a few with HD chrome.

I have an equally large pile sitting there for the sportster as well, just went with "polished" for that one.
Title: Re: What did you do to or on your CVO today?
Post by: J.Mart60 on February 14, 2015, 06:47:33 PM
Did some 6th gear riding, sounds trivial but I rarely get over 50 mph going to and from work. I dread the thought of getting on the superslab but I just had to let the ol girl strectch her legs. So we took off from Sanford, took I4 to I95 up to Destination Daytona, ate lunch and backroads back home.
Title: Re: What did you do to or on your CVO today?
Post by: 911Shark on February 14, 2015, 08:51:42 PM
Got the Ohlins HD159 on...finally. Suffice to say the instructions are terrible, but Howard got me on track.
Title: Re: What did you do to or on your CVO today?
Post by: Lars on February 14, 2015, 11:02:58 PM
Rolled it out of the shop and took a picture of it on this beautiful springlike Valentines Day.

Title: Re: What did you do to or on your CVO today?
Post by: 2 ROSE on February 14, 2015, 11:06:26 PM
Rolled it out of the shop and took a picture of it on this beautiful springlike Valentines Day.

Nice picture Lars,
I forgot what color my yard is suppose to be.
Title: Re: What did you do to or on your CVO today?
Post by: DesertHOG on February 15, 2015, 04:02:44 PM
I listed my 2011 FTRUSE on eBay for sale. It has a low reserve price. Please look and let me know if I have any spelling or grammar errors :)

http://www.ebay.com/itm/271776769718?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649 (http://www.ebay.com/itm/271776769718?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649)

Simon
Title: Re: What did you do to or on your CVO today?
Post by: baddyna96 on February 16, 2015, 10:03:35 AM
Bought a J&S jack yesterday at the Chicago Bike Show. Rock solid product!

(http://i250.photobucket.com/albums/gg257/baddyna/20150216_082910_edited.jpg) (http://s250.photobucket.com/user/baddyna/media/20150216_082910_edited.jpg.html)
Title: Re: What did you do to or on your CVO today?
Post by: Billy on February 16, 2015, 08:16:43 PM
Bought a J&S jack yesterday at the Chicago Bike Show. Rock solid product!

(http://i250.photobucket.com/albums/gg257/baddyna/20150216_082910_edited.jpg) (http://s250.photobucket.com/user/baddyna/media/20150216_082910_edited.jpg.html)
I agree, bought one last year after looking at them for 3 yrs. my wife loves it makes it very easy to clean and work on the bikes.     Billy
Title: Re: What did you do to or on your CVO today?
Post by: cmashark on February 16, 2015, 09:47:56 PM
Spent the day setting up my new trailer so I can take my bike to get it dyno'ed on Friday... No, I'm not riding it 2.5 hours in 30 degree weather.  Lol. Will be using Chad at Wide Open Cycles in Fredricksburg, VA for the tuning.
Title: Re: What did you do to or on your CVO today?
Post by: GregKhougaz on February 18, 2015, 12:02:40 AM
Helped a good friend pick up his CVO Limited in Carbon Dust / Charcoal Slate this afternoon.  This is treeman / Kerry.  He agreed to buy it moments before Marty / 110MOFO came to the dealership to get it.  Timing is everything.    :coolblue:

(http://tapatalk.imageshack.com/v2/15/02/17/8c0e0a4d57141b9399f2a7ed97fc90fe.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: Reddog303 on February 18, 2015, 01:30:49 AM
110 miles today on the  CVO RGU north of the 49th 58 degrees and sunny what a day ... 8) 8) 8)
Title: Re: What did you do to or on your CVO today?
Post by: 2 ROSE on February 18, 2015, 01:39:09 AM
110 miles today on the  CVO RGU north of the 49th 58 degrees and sunny what a day ... 8) 8) 8)

Wait a minute...how the hell is it 58° in Canada and 15° in Pennsylvania???
Just ain't fair...  :-\
Title: Re: What did you do to or on your CVO today?
Post by: martys on February 18, 2015, 08:31:02 AM
Wait a minute...how the hell is it 58° in Canada and 15° in Pennsylvania???
Just ain't fair...  :-\
West Coast  :) Must have been one of the 27 day's a year that it's not raining out there  :huepfenlol2: :huepfenlol2: :huepfenlol2:  Glad to see a fellow Canuck able to ride in February  :2vrolijk_21: That certainly isn't going to happen in Ontario  :nixweiss: :drink:


Marty
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on February 18, 2015, 10:24:49 AM
While I would normally be on the bike in these temps, the good Lord decided that the NE was having all the fun and gave us some of it in East TN.  Doesn't look like a lot but there is 1/2 to 1 1/2" of ice beneath that fresh 2" of snow we got this morning.  It's nothing like what New England is going through but still a mess for us Southern boys (and girls).  Predicting -5 for in the morning with a high of 12....somebody turned on the freezer down here....
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on February 18, 2015, 01:03:52 PM
While I would normally be on the bike in these temps, the good Lord decided that the NE was having all the fun and gave us some of it in East TN.  Doesn't look like a lot but there is 1/2 to 1 1/2" of ice beneath that fresh 2" of snow we got this morning.  It's nothing like what New England is going through but still a mess for us Southern boys (and girls).  Predicting -5 for in the morning with a high of 12....somebody turned on the freezer down here....
That sucks. Hang in there buddy. Wind chill was minus 25 here this morning.
Title: Re: What did you do to or on your CVO today?
Post by: J.Mart60 on February 18, 2015, 01:11:04 PM
It's sposed to be a low of 33 tomorrow morning and back into the high 70's by next Tue. here in Orlando. Jeez!
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on February 18, 2015, 01:19:27 PM
It's sposed to be a low of 33 tomorrow morning and back into the high 70's by next Tue. here in Orlando. Jeez!
33! That's 58 degrees warmer than it was here this morning LOL
Title: Re: What did you do to or on your CVO today?
Post by: Mano on February 18, 2015, 04:10:03 PM
West Coast  :) Must have been one of the 27 day's a year that it's not raining out there  :huepfenlol2: :huepfenlol2: :huepfenlol2:  Glad to see a fellow Canuck able to ride in February  :2vrolijk_21: That certainly isn't going to happen in Ontario  :nixweiss: :drink:


Marty

X2.

The news right now is talking about an extreme cold weather alert here in Toronto, Ontario. :(
Title: Re: What did you do to or on your CVO today?
Post by: Nicky Pass on February 18, 2015, 07:46:10 PM
-30* windchill in Chicago tomorrow....I try to think about Grand Cayman in 2 weeks!
Title: Re: What did you do to or on your CVO today?
Post by: TXGator on February 18, 2015, 09:36:39 PM
-30* windchill in Chicago tomorrow....I try to think about Grand Cayman in 2 weeks!

My son is in Great Lakes..  That's about 70* colder than here...
Title: Re: What did you do to or on your CVO today?
Post by: Lars on February 18, 2015, 10:01:59 PM
This summer when you guys are wiping sweat and drinking mint julep's you will be thinking back to these winter days and wishing you had some of this cooler weather!!  8)  8)
Title: Re: What did you do to or on your CVO today?
Post by: kastout on February 19, 2015, 06:54:29 AM
NEW EXHUST SYSTEM, FULLSAC HEAD PIPE AND A SET OF CFR CHROME SLIPONS :bananarock:
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on February 19, 2015, 08:26:33 AM
While I would normally be on the bike in these temps, the good Lord decided that the NE was having all the fun and gave us some of it in East TN.  Doesn't look like a lot but there is 1/2 to 1 1/2" of ice beneath that fresh 2" of snow we got this morning.  It's nothing like what New England is going through but still a mess for us Southern boys (and girls).  Predicting -5 for in the morning with a high of 12....somebody turned on the freezer down here....

I too would normally ride in this temperature.  However, the Freezing rain has ICE all over my road.  Slid four times on my wife's 4x4 Range Rover.  Just on the road out of my house,  Hills and curves a long the river, and spots that do not see sun, will be after Saturday where there is any hope of getting on the bike.
Title: Re: What did you do to or on your CVO today?
Post by: Reddog303 on February 19, 2015, 11:27:47 PM
West Coast  :) Must have been one of the 27 day's a year that it's not raining out there  :huepfenlol2: :huepfenlol2: :huepfenlol2:  Glad to see a fellow Canuck able to ride in February  :2vrolijk_21: That certainly isn't going to happen in Ontario  :nixweiss: :drink:


Marty
Yup you got it not one day of snow out west this year and all the ski hills locally closed, back to 50+ tommorrow daughter lives in London Ont. she tells me all about "lake effect"  :confused5: :confused5:
Title: Re: What did you do to or on your CVO today?
Post by: 2 ROSE on February 19, 2015, 11:40:14 PM
The news just showed a picture of Niagara Falls frozen over...DAMN ITS COLD!!!! Today set a record in Pittsburgh for a new low high temperature. What ever happen to that global warming stuff they use to talk about???
Everybody Stay Warm!!!
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on February 20, 2015, 08:15:28 AM
The news just showed a picture of Niagara Falls frozen over...DAMN ITS COLD!!!! Today set a record in Pittsburgh for a new low high temperature. What ever happen to that global warming stuff they use to talk about???
Everybody Stay Warm!!!

Yep, this Global warming stuff is really freezing me!  Last two summer cooler than normal and colder than normal winters.

I am ready for so Global cooling !
Title: Re: What did you do to or on your CVO today?
Post by: Bromebe on February 20, 2015, 08:23:21 AM
Should be around 70 something here in south East Texas this weekend,
most likely will need to mow the grass  8)
and of course take a Ride on Flash  :P
then back to work,  :(

no Cayman trips in my future  :drink:
just Madrid in June, for work! :coolblue:

now where did I put that sun screen :huepfenjump3:
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on February 20, 2015, 08:43:01 AM
This summer when you guys are wiping sweat and drinking mint julep's you will be thinking back to these winter days and wishing you had some of this cooler weather!!  8)  8)

Never!!! Bring on the heat  ;D
Title: Re: What did you do to or on your CVO today?
Post by: knothead on February 20, 2015, 08:56:21 AM
Wiped them down, check the oil and rode to Galveston for Gumbo... 65 and sunshine ..great day on the CVO's with my son
Title: Re: What did you do to or on your CVO today?
Post by: Boatman on February 20, 2015, 09:22:03 AM
Wiped them down, check the oil and rode to Galveston for Gumbo... 65 and sunshine ..great day on the CVO's with my son

You suck Knothead!    :cherry: :cherry:   -10 degrees here in Columbus this morning (not chill factor).

Really happy you and your son were able to ride.  Your picture warmed me up a little.   :2vrolijk_21: :2vrolijk_21: 
Title: Re: What did you do to or on your CVO today?
Post by: Bromebe on February 20, 2015, 11:12:03 AM
yep he was sucking down some gumbo and miller lites he was!

like'n the V-rod Mike
Title: Re: What did you do to or on your CVO today?
Post by: harleybar7 on February 20, 2015, 11:58:25 AM
Thats a nice pair to draw to Knothead.
Title: Re: What did you do to or on your CVO today?
Post by: Puma on February 20, 2015, 03:30:16 PM
Never!!! Bring on the heat  ;D
I'll second JSwerve. I never liked winter, even when I was a kid.
Title: Re: What did you do to or on your CVO today?
Post by: jachd17 on February 20, 2015, 04:18:08 PM
I'll second JSwerve. I never liked winter, even when I was a kid.

 X3!!!!
Title: Re: What did you do to or on your CVO today?
Post by: skippy on February 20, 2015, 04:31:29 PM
X3!!!!
 I walked by mine on the way out it colder than well digger a$$ in Alaska down here in North Cacalacca  i want to move back to FLA
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on February 21, 2015, 08:04:21 AM
Lets see, snowed last night, now we are getting more Freezing rain.  So have not been able to do much at all on my bike.  Did put my new tag on the bike   TYM2RD  sure wish is was right now.
Title: Re: What did you do to or on your CVO today?
Post by: Screeper on February 21, 2015, 08:29:10 AM
Going to pick up from dealership.....   Pipes and canned tune in for now.  6 miles on odo.
Title: Re: What did you do to or on your CVO today?
Post by: FXD_TG on February 21, 2015, 08:47:30 AM
Not a darn thing...  It's only been out once since December 15th.

I checked the maintenance log ahead of our ride down to Daytona in about 19 days and everything is up to date. 

Topping off the air pressure in the tires is about all I'll need to do unless the weather is going to be cold/wet. 

Here's hoping for sunny skies and warm temps.

The only bike getting any ride time this winter has been the BMW R1100S commuter bike; the First Gear heated jacket and glove liners have been getting plenty of use.
Title: Re: What did you do to or on your CVO today?
Post by: BDMastiff on February 21, 2015, 10:04:33 AM
Spending today servicing my CVO Road Glide, 96 Fat Boy, Chevy Truck & Jeep.  Not much fun but they all need to be done.
Title: Re: What did you do to or on your CVO today?
Post by: cmashark on February 21, 2015, 01:38:29 PM
Nothing today, but did take it to get dyno tuned yesterday. Sheets are posted in twin cam section. 
Title: Re: What did you do to or on your CVO today?
Post by: Screeper on February 21, 2015, 03:16:48 PM
(http://tapatalk.imageshack.com/v2/15/02/21/d8b2da12f4dc2fb45dec25fa7c059eb7.jpg)(http://tapatalk.imageshack.com/v2/15/02/21/65cdef6bf3b7deb0ab2245429727438c.jpg)(http://tapatalk.imageshack.com/v2/15/02/21/8b33526fc9bf8efccfd8a6903c7027c3.jpg)

Posted some pics as I picked up from dealership.  Pipes sound great.  Putting on some miles today.


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: DesertHOG on February 22, 2015, 12:26:42 AM
CVO stayed in the garage today but I broke out my Custom Road Glide and headed to Santa Fe to get a handle bar change.

(https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-xap1/t31.0-8/10900120_1019291361419115_6666709378204684269_o.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: Jock on February 22, 2015, 08:11:51 AM
CVO stayed in the garage today but I broke out my Custom Road Glide and headed to Santa Fe to get a handle bar change.

(https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-xap1/t31.0-8/10900120_1019291361419115_6666709378204684269_o.jpg)

Geez!  Suddenly I just felt like I had dropped some acid!

 ;)   :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: JustDennis on February 22, 2015, 08:26:23 AM
Installed Ohlins rear shocks and full sac 2" cores in Cvo mufflers.


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Lars on February 22, 2015, 10:37:34 AM
Screeper,
That is one beautiful Black and Gold!!  :2vrolijk_21:  :2vrolijk_21:

I road my SEUC8 for a destress 50 mile putt yesterday.
Not a cloud in the sky and mid 50's temp.
Stopped at DQ and had a hot fudge sundae.
Title: Re: What did you do to or on your CVO today?
Post by: Reddog303 on February 22, 2015, 06:12:12 PM
Installed Ohlins rear shocks and full sac 2" cores in Cvo mufflers.


Sent from my iPhone using Tapatalk
Hey JD how do the 2" sound? Thats what I am looking to do,the Ohlins as well , 8)
Title: Re: What did you do to or on your CVO today?
Post by: 911Shark on February 22, 2015, 08:19:29 PM
went to put the HD Logo Derby cover on the 15 FLTRUSE....but stripped the last fricken screw! :oops: also replaced the saddle heat shields with the Kuryakyn tinted ones. Put the Ness chrome horn cover with he HD Logo points cover.
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on February 22, 2015, 09:18:21 PM
went to put the HD Logo Derby cover on the 15 FLTRUSE....but stripped the last fricken screw! :oops: also replaced the saddle heat shields with the Kuryakyn tinted ones. Put the Ness chrome horn cover with he HD Logo points cover.


 :worthless:
Title: Re: What did you do to or on your CVO today?
Post by: Puma on February 23, 2015, 06:22:47 AM
Finally got a chance to ride with my new C&C Fastback on the bike. Only about 45 minutes (it's been another rough winter). The stock saddle isn't bad, but I always felt too far forward on the bike. This is a nice improvement. Not once did I try to move back.
Title: Re: What did you do to or on your CVO today?
Post by: JustDennis on February 23, 2015, 10:04:25 AM

Hey JD how do the 2" sound? Thats what I am looking to do,the Ohlins as well , 8)
Got them both installed but haven't ridden yet. I installed the 1.75" full sac cores first, started the bike and decided to switch to the 2" for first test. Will let you know once I ride some. Weather is warming up!


Sent from my iPad using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Lars on February 23, 2015, 11:45:29 AM
went to put the HD Logo Derby cover on the 15 FLTRUSE....but stripped the last fricken screw! :oops:

That's why they make tongue wrenches!   :nixweiss:  :2vrolijk_21:  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: OBB on February 23, 2015, 04:48:03 PM
That's why they make tongue wrenches!   :nixweiss:  :2vrolijk_21:  :2vrolijk_21:
Ain't never seen a tongue wrench before. Do you have to lick the bolt in a clockwise motion to tighten it up?  :P
Title: Re: What did you do to or on your CVO today?
Post by: jachd17 on February 23, 2015, 06:36:30 PM
Ain't never seen a tongue wrench before. Do you have to lick the bolt in a clockwise motion to tighten it up?  :P

Now that's some funny stuff right there... :huepfenlol2:
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on February 23, 2015, 07:05:56 PM
Ain't never seen a tongue wrench before. Do you have to lick the bolt in a clockwise motion to tighten it up?  :P

It's actually a style of pipe wrench. I'm sure many of us have seen them but just never realized they had that name. I always just called it a chain wrench.
Title: Re: What did you do to or on your CVO today?
Post by: FXD_TG on February 23, 2015, 08:20:43 PM
Hey JD how do the 2" sound? Thats what I am looking to do,the Ohlins as well , 8)

IMHO, Fullsac 2" sound really good.  However, I opted to wrap the baffles with all of the stock batting after doing a ride with just 1/2 of the stock batting. There was just too much sound travelling through the wall of the slip-on.   Installation blog entry: Part I of II (https://ridingtwoup.wordpress.com/2013/08/24/what-do-you-do-between-200am-and-400am-when-you-cant-sleep/)  and Part II of II (https://ridingtwoup.wordpress.com/2013/08/24/and-between-800am-900am/).  Part II also has a link to  a short video / audio clip of the pipes (http://youtu.be/6LC_EtOHNjc) , but you have to wear ear buds or headphones with your hands cupped over the ears to get an accurate sound reproduction on most computers that don't have really good speakers.

Ohlins, another great call. I've tried Progressive and BiTubos on my Harley's and the Ohlins are just far and away the best I've ever tried.  I went through a  lot of different shocks on my sport bikes and ended up with Ohlins.  Turns out, they're just better on just about any bike.   I've got the 3-3's, which started out on my '11 Wide Glide.  Howard Messner worked with me at last year's Bike Week to get the preload and dampening adjusted for the Road King. 

(https://ridingtwoup.files.wordpress.com/2014/03/img_20140316_182216_995.jpg?w=300)
Title: Re: What did you do to or on your CVO today?
Post by: Opossum on February 24, 2015, 02:19:27 PM
Finally finished the driveway this morning!  jus kiddin!  :P
Title: Re: What did you do to or on your CVO today?
Post by: T-Roy on February 24, 2015, 03:57:21 PM
I am flying in from offshore to Galveston tomorrow. Then tomorrow afternoon after the rain stops I am headed to Fort Worth, TX on the bike so I can be at GMR performance Thursday morning. I sure hope the snow and ice melts tomorrow afternoon :o
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on February 24, 2015, 07:39:12 PM
I am flying in from offshore to Galveston tomorrow. Then tomorrow afternoon after the rain stops I am headed to Fort Worth, TX on the bike so I can be at GMR performance Thursday morning. I sure hope the snow and ice melts tomorrow afternoon :o

Man Steve is cleaning up! Good luck with your build.  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Lars on February 24, 2015, 11:01:27 PM
Ain't never seen a tongue wrench before. Do you have to lick the bolt in a clockwise motion to tighten it up?

That darn automatic word speller thingy gets me in these predicaments.
Tongue, Torque, what the heck, it gave us a good laugh.
I guess there is something to be said for proof reading before posting.

My Bad !!  :nixweiss:  :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: Puma on February 25, 2015, 06:10:24 AM
Ain't never seen a tongue wrench before. Do you have to lick the bolt in a clockwise motion to tighten it up?

That darn automatic word speller thingy gets me in these predicaments.
Tongue, Torque, what the heck, it gave us a good laugh.
I guess there is something to be said for proof reading before posting.

My Bad !!  :nixweiss:  :nixweiss:
:zroflmao:
Title: Re: What did you do to or on your CVO today?
Post by: T-Roy on February 26, 2015, 09:39:44 AM
Well I made it to my sister's house last night. Then I rode the bike from her house to GMR Performance this morning. A few minutes after getting to Steve's shop it started snowing outside. Whew that was close.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on February 26, 2015, 05:50:45 PM
Well I made it to my sister's house last night. Then I rode the bike from her house to GMR Performance this morning. A few minutes after getting to Steve's shop it started snowing outside. Whew that was close.
Hell, I didn't think Steve moved his shop up north.  :P
Title: Re: What did you do to or on your CVO today?
Post by: T-Roy on February 26, 2015, 07:00:33 PM
Hell, I didn't think Steve moved his shop up north.  :P
Yeah compared to UP NORTH it probably would not have even been classified REAL SNOW. But for a boy from South Louisiana snow is snow!! LOL
Title: Re: What did you do to or on your CVO today?
Post by: OBB on February 26, 2015, 07:52:09 PM
I did stop by the painter to visit my parts today. Will pick them up next week. Giving the paint a little more time to cure  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: nsnorgrass on February 26, 2015, 11:45:36 PM
I had a set of PM Revel wheels installed.
Title: Re: What did you do to or on your CVO today?
Post by: Puma on February 27, 2015, 01:57:19 PM
 :biggthumpup:
I had a set of PM Revel wheels installed.
Nice. CVO Road Kings forever.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on February 27, 2015, 02:18:14 PM
I had a set of PM Revel wheels installed.

Looks good!  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on February 28, 2015, 08:43:49 AM
I had a set of PM Revel wheels installed.

Wow, those really look good on your bike.
Title: Re: What did you do to or on your CVO today?
Post by: Indenial on February 28, 2015, 10:08:19 AM
  What did I do???    Dreamn't of riding----- minus 12 this morning
Title: Re: What did you do to or on your CVO today?
Post by: Billy on February 28, 2015, 05:05:16 PM
I had the same dream     Billy
Title: Re: What did you do to or on your CVO today?
Post by: makers08springer on February 28, 2015, 10:55:16 PM
Not quite as cold here but I did the exact same thing! Seems to be a llot of that going around.... C'mon spring!
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on March 06, 2015, 06:47:52 AM
I would dream about moving.  8)
Title: Re: What did you do to or on your CVO today?
Post by: martys on March 06, 2015, 08:03:13 AM
I would dream about moving.  8)
I moved Stu  :) ... Off the couch to shovel the driveway AGAIN  :nervous:  :drink:


Marty
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on March 06, 2015, 08:53:01 AM
I would dream about moving.  8)

Stu enjoy the rest of your riding season. Soon you'll be dreaming about cooling off and we will be enjoying the perfect northern summer. There's always a trade off! Miss you buddy give my best to Lisa  8)

Spring has arrived here. While I definitely am not a fan of northern winters, our springs are gorgeous and the summer weather is very nice. Looking forward to all the trees and yards coming back to life in that vibrant green. Life is good.  :bananarock:
Title: Re: What did you do to or on your CVO today?
Post by: GregKhougaz on March 07, 2015, 01:40:55 AM
I moved Stu  :) ... Off the couch to shovel the driveway AGAIN  :nervous:  :drink:

Marty

Wow!    :vrolijk27:    That's a lot of shoveling, Marty!   

 :vrolijk_3:   Rode about 170 miles today testing out my Stage 1 kit and comparing the '15 RGU and Limited.  Very substantial difference between the redesigned fairings.  My "fair and balanced" review:  Re: 2015 RGU: I'm Blue... So Blue... (http://www.cvoharley.com/smf/index.php?topic=99868.msg1302083#msg1302083)


Top of Topanga Canyon overlooking the San Fernando Valley.
Title: Re: What did you do to or on your CVO today?
Post by: Puma on March 07, 2015, 07:30:56 AM
Wow!    :vrolijk27:    That's a lot of shoveling, Marty!   

 :vrolijk_3:   Rode about 170 miles today testing out my Stage 1 kit and comparing the '15 RGU and Limited.  Very substantial difference between the redesigned fairings.  My "fair and balanced" review:  Re: 2015 RGU: I'm Blue... So Blue... (http://www.cvoharley.com/smf/index.php?topic=99868.msg1302083#msg1302083)


Top of Topanga Canyon overlooking the San Fernando Valley.
I'm not normally a RG guy, but that bike is beautiful.
Title: Re: What did you do to or on your CVO today?
Post by: 2 ROSE on March 07, 2015, 08:30:21 AM
I moved Stu  :) ... Off the couch to shovel the driveway AGAIN  :nervous:  :drink:


Marty

Yeah Marty, I agree with GregK, thats a lot of snow shoveling. But my investigative eye don't see as much snow on your neighbors property or roof. Are you sure your neighbors aren't throwing their snow in front of your house while your in bed sleeping. Next big snow maybe you want to stand guard and make sure that is not happening...just saying.  :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: cheeset202 on March 07, 2015, 10:29:30 AM
(http://tapatalk.imageshack.com/v2/15/03/07/b49c5fb8c0161095127c6a8785dafb7f.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: cheeset202 on March 07, 2015, 10:36:44 AM
Pics in previous post, newbie on adding pics, converted 2014 Limited CVO to Street, detachable tour pak, hidden antenna, custom seat and curved license plate holder......best of both worlds!  Previous mods Reinhart true duals and street tuner.  Next mod (maybe) saddlebag speakers....big bucks for 2 more speakers!
Title: Re: What did you do to or on your CVO today?
Post by: Lars on March 07, 2015, 11:01:14 AM
Cheeset202,
I think you get more bang for the buck with speakers in the lowers.
Keeps the sound out in front of you.  :2vrolijk_21:  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on March 07, 2015, 07:01:20 PM
Cheeset202,
I think you get more bang for the buck with speakers in the lowers.
Keeps the sound out in front of you.  :2vrolijk_21:  :2vrolijk_21:

Sure does.  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: cheeset202 on March 07, 2015, 08:50:13 PM
Can't do that with liquid cooling!
Title: Re: What did you do to or on your CVO today?
Post by: DesertHOG on March 07, 2015, 09:07:50 PM
Road to Santa Fe(http://tapatalk.imageshack.com/v2/15/03/07/d187426df0d0d611a092d5a99f09f4d9.jpg)



Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Mr. Warlock on March 08, 2015, 06:46:59 AM
Pics in previous post, newbie on adding pics, converted 2014 Limited CVO to Street, detachable tour pak, hidden antenna, custom seat and curved license plate holder......best of both worlds!  Previous mods Reinhart true duals and street tuner.  Next mod (maybe) saddlebag speakers....big bucks for 2 more speakers!


What seat do you have on that? looks great!!
Title: Re: What did you do to or on your CVO today?
Post by: skippy on March 08, 2015, 03:56:10 PM
I rode my dyna today 1st  long ride after changing the bars and a few other goodies
Title: Re: What did you do to or on your CVO today?
Post by: baddyna96 on March 08, 2015, 04:30:42 PM
Ordered my color matched detachable tour Pak yesterday.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on March 08, 2015, 06:51:31 PM
Added a few touches to the saddlebags. Once we get a few days where I can get the garage warm enough to install all my LEDs, I'll get it all put back together. I still need to do my muffler cores.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on March 08, 2015, 07:26:24 PM
Almost 50 degrees for the 3rd straight day. High's in the mid 60's by mid week. Ordered my Liqui Moly Race Tech GT-1 10W-60 Synthetic Motor Oil. Time to get the ol girl serviced and waxed and ready to roll.
Title: Re: What did you do to or on your CVO today?
Post by: jachd17 on March 08, 2015, 07:34:21 PM
Almost 50 degrees for the 3rd straight day. High's in the mid 60's by mid week. Ordered my Liqui Moly Race Tech GT-1 10W-60 Synthetic Motor Oil. Time to get the ol girl serviced and waxed and ready to roll.
I just changed oil in all 3 holes with Liqui Moly going in the motor. First time using the stuff. Now waiting for the remaining 3-4 feet of snow to melt and then its ride time!
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on March 08, 2015, 07:41:27 PM
I just changed oil in all 3 holes with Liqui Moly going in the motor. First time using the stuff. Now waiting for the remaining 3-4 feet of snow to melt and then its ride time!

This is my first time with it as well. Hoping for a little quieter motor.
Title: Re: What did you do to or on your CVO today?
Post by: TinSpinner on March 08, 2015, 08:16:59 PM
Nearly 70 today in west GA, finally got to take a full tank ride. Felt good to get out and feel the wind in my face, been a wet messy winter here. We haven't had any snow in my area this winter but lots of cold rain and other weather that is not conducive to an enjoyable ride. Daffodils are blooming everywhere, time to get a few more good rides in before I have to start mowing.
Title: Re: What did you do to or on your CVO today?
Post by: WVHoop on March 08, 2015, 08:30:53 PM
This is my first time with it as well. Hoping for a little quieter motor.
Jesse, first off I hope you've had a decent winter if there is such a thing. Second, I read about the oil you mentioned so I looked it up........Just curious where you learned of it & do you know of anyone running it?

Thanks,
Hoop
Title: Re: What did you do to or on your CVO today?
Post by: cheeset202 on March 08, 2015, 08:52:46 PM
Mr. Warlock it is the Harley custom seat with ostrich inlays, red and burgundy to match the bike paint.  You can choose many different designs, inlay fabrics and colors to suit your taste. Took about 3 weeks to get it from the factory.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on March 08, 2015, 08:55:26 PM
Jesse, first off I hope you've had a decent winter if there is such a thing. Second, I read about the oil you mentioned so I looked it up........Just curious where you learned of it & do you know of anyone running it?

Thanks,
Hoop

Hey Hoop the winter sucked but the weather has finally broken.

The oil is frequently used by the motor heads over on Harley Tech Talk. Here's a link to the exact topic;

http://harleytechtalk.org/htt/index.php/topic,75005.0/topicseen.html
Title: Re: What did you do to or on your CVO today?
Post by: mrambo4 on March 10, 2015, 12:31:12 AM
Well got my color matched king tour pack, and installed it, now can't wait for good weather so we can take another 1900 mile week off work ride with my beautiful Harley riding wife. Yep she is a cvo owner also. 
Title: Re: What did you do to or on your CVO today?
Post by: martys on March 10, 2015, 07:37:27 AM
Well got my color matched king tour pack, and installed it, now can't wait for good weather so we can take another 1900 mile week off work ride with my beautiful Harley riding wife. Yep she is a cvo owner also.
Looking forward to Pic's  :)  :worthless:


Marty
Title: Re: What did you do to or on your CVO today?
Post by: CVO2FIXUP on March 11, 2015, 10:24:53 PM
 Installed my newly painted lower fairing speaker pods. Came out nice. Should of came from HD that way.
Title: Re: What did you do to or on your CVO today?
Post by: CVO2FIXUP on March 11, 2015, 10:27:10 PM
 One more.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on March 11, 2015, 10:35:23 PM
Installed my newly painted lower fairing speaker pods. Came out nice. Should of came from HD that way.

Looks great. BTW mine did come that way lol.
Title: Re: What did you do to or on your CVO today?
Post by: CVO2FIXUP on March 11, 2015, 10:59:46 PM
 I know the street glides get all the cool sheezat.  :-[  But I am catching up.
Title: Re: What did you do to or on your CVO today?
Post by: mrambo4 on March 12, 2015, 01:26:36 AM
Looking forward to Pic's  :)  :worthless:


Marty


I know, I will get them tomorrow. We finally got a break in our chitty Midwest weather.
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on March 12, 2015, 09:24:46 AM
Rode into work after she sat in the garage for three weeks (salt, snow, ice, rain finally stopped or was washed away)....longest Ginger has ever had to sit.  I was in the beginning stages of withdrawal and was starting to feel what it must be like to live up North and not ride for weeks/months at a time.....did'n'a like it one bit.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on March 12, 2015, 09:54:30 AM
Rode into work after she sat in the garage for three weeks (salt, snow, ice, rain finally stopped or was washed away)....longest Ginger has ever had to sit.  I was in the beginning stages of withdrawal and was starting to feel what it must be like to live up North and not ride for weeks/months at a time.....did'n'a like it one bit.

What a beauty  :2vrolijk_21:

70 in Iowa today :) Pulling the ol girl out for some fresh oil and filtration and a nice clean up!
Title: Re: What did you do to or on your CVO today?
Post by: CVO2FIXUP on March 12, 2015, 07:15:40 PM
 Did a bit more work on the 2010 today. Got the speaker lids on and wired up. Used Hawg Wired 5 by 7's with the cross overs. Man do these pups make a massive difference in the volume and sound quality. Love the result.

 Also got the rear wing put on. Nice and straight and the light only comes on only with the brake. Rack is off.
Title: Re: What did you do to or on your CVO today?
Post by: CVO2FIXUP on March 12, 2015, 07:16:39 PM
another.
Title: Re: What did you do to or on your CVO today?
Post by: CVO2FIXUP on March 12, 2015, 07:17:40 PM
Another.
Title: Re: What did you do to or on your CVO today?
Post by: CVO2FIXUP on March 12, 2015, 07:18:33 PM
 Last one.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on March 12, 2015, 07:32:52 PM
Looks great CVO2FIXUP
Title: Re: What did you do to or on your CVO today?
Post by: OBB on March 12, 2015, 09:29:42 PM
Finished up my winter mod list.....and discover a puddle of antifreeze on the left lower fairing  >:( It'll be going to the dealer here in the next few days to get that addressed. I already talked to the service writer and told him about it. Service manager called me back a little while later apologizing about it. Not his fault. Sounds like the same thing Dave and Joe went through with their bikes and the cold weather. Only mines been in the garage on the jack for the last 2 1/2 months.  :soapbox:
Title: Re: What did you do to or on your CVO today?
Post by: Opossum on March 13, 2015, 04:33:23 PM
Went from this
Title: Re: What did you do to or on your CVO today?
Post by: Opossum on March 13, 2015, 04:34:33 PM
To THIS!
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on March 13, 2015, 08:55:40 PM
Nice, those are the remote reservoir Ohlins aren't they?

You should love them, as mine are one step down, and they are great.
Title: Re: What did you do to or on your CVO today?
Post by: digga25 on March 13, 2015, 09:03:06 PM
my new engine badges from Bengi at Legends baggers
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on March 13, 2015, 09:11:23 PM
Changed the oil, checked the bike over, lubed the neck, and took her for the first spin of the year  :bananarock:
Title: Re: What did you do to or on your CVO today?
Post by: WVHoop on March 13, 2015, 09:21:04 PM
Put a Battistini frame grill on but still haven't ridden it yet this year. Can't wait though!!
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on March 13, 2015, 09:24:16 PM
Changed the oil, checked the bike over, lubed the neck, and took her for the first spin of the year  :bananarock:

Soon....very soon.....for some reason the weather gods keep wasting the 50* and higher days during the work week, forcast is for some fairly heavy rains this weekend  and temps in the 40's so the chemicals should be gone......
Title: Re: What did you do to or on your CVO today?
Post by: SHRK2TH on March 13, 2015, 09:38:36 PM
Added quite a bit over the winter months.  The built 120R was planted late last fall, swapped out to full chrome rims/tires/rotors/pads/and bearings.  Just replaced the rear shocks with Ohlins 357's.  Also moved the tour pack back, and put on arm rest
to keep my wife comfortable.  So with all that, wiped her down this morning and went for a ride & lunch.  Couldn't complain here Iowa today with 62 degree weather. 
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on March 13, 2015, 09:44:40 PM
lookin' mighty fine  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Mano on March 14, 2015, 10:47:52 AM
lookin' mighty fine  :2vrolijk_21:

X2 :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: martys on March 14, 2015, 11:15:39 AM
That's One Good Lookin' Skunk  :2vrolijk_21: :2vrolijk_21:  :drink:


Marty
Title: Re: What did you do to or on your CVO today?
Post by: Grizzly on March 14, 2015, 03:07:06 PM
Added quite a bit over the winter months.  The built 120R was planted late last fall, swapped out to full chrome rims/tires/rotors/pads/and bearings.  Just replaced the rear shocks with Ohlins 357's.  Also moved the tour pack back, and put on arm rest
to keep my wife comfortable.  So with all that, wiped her down this morning and went for a ride & lunch.  Couldn't complain here Iowa today with 62 degree weather.

I'm sure the wife is quite comfy on that beauty!   :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: WTF Chuck on March 14, 2015, 07:25:14 PM
Well I installed a new set of Wild one 578 today. First time changing bars on a dresser. It was not very difficult at all and saved a bunch of cash. While it was apart I moved the XM antenna and added the Mike from an extra headset for voice command wired into the non used 280 plug in the fairing no need to buy the $70 cable from HD saved more cash.Everything back together and works. Did i say I saved a bunch of CASH what can I buy next I need to spend some cash and have a beer
Title: Re: What did you do to or on your CVO today?
Post by: WTF Chuck on March 14, 2015, 07:26:44 PM
Add Mike
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on March 14, 2015, 07:30:08 PM

New Michelin Commander II tires an oil change and washed and ready for this seasons' coat of wax.  :bananarock:


I'm starting to re-think the whole chrome mentality.  :huepfenjump3:
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on March 14, 2015, 07:45:47 PM
Had some time at home to uncover the bike and completed some routine maintenance.  Hope to be able to get into the wind for the first time this year tomorrow afternoon.   
Title: Re: What did you do to or on your CVO today?
Post by: OBB on March 14, 2015, 08:02:42 PM
Well I installed a new set of Wild one 578 today. First time changing bars on a dresser. It was not very difficult at all and saved a bunch of cash. While it was apart I moved the XM antenna and added the Mike from an extra headset for voice command wired into the non used 280 plug in the fairing no need to buy the $70 cable from HD saved more cash.Everything back together and works. Did i say I saved a bunch of CASH what can I buy next I need to spend some cash and have a beer
Spend the cash on more beer  :drink:
Title: Re: What did you do to or on your CVO today?
Post by: CircleRacer on March 14, 2015, 09:30:30 PM
Picked up 2015 limited CVO from dealer now that we have had rain to wash all the salt away had to wait until after HOG meeting then rode 104 miles it felt very good!! a lot different ride than the 2009 EGCVO!!
Title: Re: What did you do to or on your CVO today?
Post by: RAINEY on March 15, 2015, 12:00:05 AM
Still waiting for a good rain here to wash the salt off the roads.  My new CVO is waiting at the dealership. 
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on March 15, 2015, 12:48:26 AM
Added quite a bit over the winter months.  The built 120R was planted late last fall, swapped out to full chrome rims/tires/rotors/pads/and bearings.  Just replaced the rear shocks with Ohlins 357's.  Also moved the tour pack back, and put on arm rest
to keep my wife comfortable.  So with all that, wiped her down this morning and went for a ride & lunch.  Couldn't complain here Iowa today with 62 degree weather.
Looks fantastic!!
Title: Re: What did you do to or on your CVO today?
Post by: Quantumracer on March 15, 2015, 08:31:11 AM
Installed my WardWorks fans about a month ago.  She's been sitting, patiently, in the garage waiting for the snow, ice and rain to piss off......today we ride!  Ok, it's just to work and back, but it still makes me one very happy camper!  20% chance of rain later, but I DONT CARE!
Title: Re: What did you do to or on your CVO today?
Post by: owl893 on March 16, 2015, 07:48:37 AM
DAYTONA...............things don't change much.
Title: Re: What did you do to or on your CVO today?
Post by: JustDennis on March 16, 2015, 01:29:48 PM

Hey JD how do the 2" sound? Thats what I am looking to do,the Ohlins as well , 8)

After riding a little with the 2" Fullsac cores I think they sound really good without being too loud. Nice deep rumble but so far quite enough for longer rides. Still need to test out on an all day ride but I'm thinking I won't need the 1.75" cores I have !

The Ohlins #3-3 May be the best upgrade I've done. The ride is great with them dialed in.

Just installed 10" Yaffe monkey bars and went for a short ride. Really like the feel so far. Waiting on T&T Fab fairing mount for my zumo and need to find some bar mirrors I like. (http://tapatalk.imageshack.com/v2/15/03/16/7159c3602ca405d2c2c7dba4cb734318.jpg)


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: OBB on March 16, 2015, 02:06:23 PM
Rode it FINALLY!!! Right up to the dealer to get a little leak fixed then out and about for a while. Took a few pix of my winter mods also.
(http://i275.photobucket.com/albums/jj306/ohiobellboy/2015%20Road%20Glide%20Ultra/IMG_20150316_113134_354_zpsonmn7uys.jpg) (http://s275.photobucket.com/user/ohiobellboy/media/2015%20Road%20Glide%20Ultra/IMG_20150316_113134_354_zpsonmn7uys.jpg.html)

(http://i275.photobucket.com/albums/jj306/ohiobellboy/2015%20Road%20Glide%20Ultra/IMG_20150316_113103_178_zpsl1yrg1sa.jpg) (http://s275.photobucket.com/user/ohiobellboy/media/2015%20Road%20Glide%20Ultra/IMG_20150316_113103_178_zpsl1yrg1sa.jpg.html)

(http://i275.photobucket.com/albums/jj306/ohiobellboy/2015%20Road%20Glide%20Ultra/IMG_20150316_113031_375_zpsopr4xqud.jpg) (http://s275.photobucket.com/user/ohiobellboy/media/2015%20Road%20Glide%20Ultra/IMG_20150316_113031_375_zpsopr4xqud.jpg.html)
   
Title: Re: What did you do to or on your CVO today?
Post by: SHRK2TH on March 16, 2015, 05:48:37 PM
Flip to the other side.  Just arrived in the mail today, custom horn cover.
Title: Re: What did you do to or on your CVO today?
Post by: SHRK2TH on March 16, 2015, 05:50:49 PM
Close up...
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on March 16, 2015, 08:50:37 PM
Close up...

Looks great. Can't believe we were in the 80's today. Rode my sled to work  :bananarock:
Title: Re: What did you do to or on your CVO today?
Post by: SHRK2TH on March 16, 2015, 09:21:54 PM
Beautiful weather :2vrolijk_21: Went for a short ride later this afternoon.  I hear many going up and down the interstate behind my house quite often here lately.  Hopefully the forecasters are wrong about this cooler weather moving back in.
Take care!
Title: Re: What did you do to or on your CVO today?
Post by: DesertHOG on March 16, 2015, 10:38:48 PM
Went on a weekend scavenger hunt, they call it a tour, that took me throughout SE New Mexico for 1064 miles over Saturday and Sunday.
.
Title: Re: What did you do to or on your CVO today?
Post by: DesertHOG on March 16, 2015, 10:50:23 PM
Here's what I found for the scavenger hunt.

18 MPH Speed Limit Sign - Albuquerque
(http://i743.photobucket.com/albums/xx76/DesertHOG/SandiaBMW-Rally/Capture-02_zpsoloosyyn.jpg) (http://s743.photobucket.com/user/DesertHOG/media/SandiaBMW-Rally/Capture-02_zpsoloosyyn.jpg.html)

Hydro Turbine Part from Elephant Butte Dam - Las Cruces
(http://i743.photobucket.com/albums/xx76/DesertHOG/SandiaBMW-Rally/Capture-03_zps3w8zyqeh.jpg) (http://s743.photobucket.com/user/DesertHOG/media/SandiaBMW-Rally/Capture-03_zps3w8zyqeh.jpg.html)

Giant HOBBS NM Sign - Hobbs, NM
(http://i743.photobucket.com/albums/xx76/DesertHOG/SandiaBMW-Rally/Capture-07_zpskxnpk4wl.jpg) (http://s743.photobucket.com/user/DesertHOG/media/SandiaBMW-Rally/Capture-07_zpskxnpk4wl.jpg.html)

Giant Cowboy Art Display - Jal, NM
(http://i743.photobucket.com/albums/xx76/DesertHOG/SandiaBMW-Rally/Capture-08_zpseead7w6a.jpg) (http://s743.photobucket.com/user/DesertHOG/media/SandiaBMW-Rally/Capture-08_zpseead7w6a.jpg.html)

1st NM Privately Funded Rest Stop - Sumner Lake State Park, NM
(http://i743.photobucket.com/albums/xx76/DesertHOG/SandiaBMW-Rally/Capture-05_zpsauwxhdct.jpg) (http://s743.photobucket.com/user/DesertHOG/media/SandiaBMW-Rally/Capture-05_zpsauwxhdct.jpg.html)

Giant Branding Iron - Trujillo, NM
(http://i743.photobucket.com/albums/xx76/DesertHOG/SandiaBMW-Rally/Capture-10_zpsyllkyonw.jpg) (http://s743.photobucket.com/user/DesertHOG/media/SandiaBMW-Rally/Capture-10_zpsyllkyonw.jpg.html)

Giant Milk Can - Moriarity, NM
(http://i743.photobucket.com/albums/xx76/DesertHOG/SandiaBMW-Rally/Capture-09_zpstswso5jv.jpg) (http://s743.photobucket.com/user/DesertHOG/media/SandiaBMW-Rally/Capture-09_zpstswso5jv.jpg.html)
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on March 17, 2015, 10:32:27 AM
Simon that's a great idea. Looks fun.
Title: Re: What did you do to or on your CVO today?
Post by: GregKhougaz on March 17, 2015, 12:33:19 PM
Went on a weekend scavenger hunt, they call it a tour, that took me throughout SE New Mexico for 1064 miles over Saturday and Sunday.
.

Looks like a great ride, Simon!  Beautiful weekend in LA too...
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on March 18, 2015, 09:47:45 PM
Dang Simon, I'm envious, stuck here off shore working and you go for a great ride.  Nice pictures, thanks for sharing.
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on March 19, 2015, 10:21:48 PM
Matching mid frame deflectors from Xtreme dimension.  Really nice.
Title: Re: What did you do to or on your CVO today?
Post by: TheGullGuy on March 19, 2015, 10:31:15 PM
Since the lowers are now full of liquid cooled stuff the additional storage is gone.  I added pouches and hope it does the trick.
Title: Re: What did you do to or on your CVO today?
Post by: dayne66 on March 19, 2015, 11:15:43 PM
Dang Simon, I'm envious, stuck here off shore working and you go for a great ride.  Nice pictures, thanks for sharing.
I agree...nice pics!   I'm off for a 6-8 week shutdown at Syncrude....no ridin' for me for a while!
Title: Re: What did you do to or on your CVO today?
Post by: SmokeyJoe on March 20, 2015, 12:51:25 PM
 Crated it and shipped it from Germany to Missisippi
Title: Re: What did you do to or on your CVO today?
Post by: MadCVORG on March 20, 2015, 01:01:45 PM
Getting ready for riding season!  Gave it a total cleaning, even through the frame area. Looks like it was just delivered. Not sure I can do this as often, though....
Title: Re: What did you do to or on your CVO today?
Post by: kiro on March 20, 2015, 01:23:09 PM
Not exactly done 'to' the CVO, but for it, ordered a jack from J&S - bikes will be coming out of storage soon.
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on March 20, 2015, 02:12:48 PM
Crated it and shipped it from Germany to Missisippi






oooh an early Christmas gift! Thank you so very much but you shouldn't have.   :huepfenlol2:
















Seriously though, I hope you and your ride have safe travels.  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: OBB on March 20, 2015, 02:18:18 PM
Crated it and shipped it from Germany to Missisippi
Moving here of a long vacation? Hope you're around for a GTG this year.
Title: Re: What did you do to or on your CVO today?
Post by: SmokeyJoe on March 20, 2015, 02:23:32 PM
I will be moving there the end of the month, but what is GTG?
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on March 20, 2015, 04:07:23 PM
I will be moving there the end of the month, but what is GTG?
GTG = Get-To-Gether.. check the events boards for them.

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: OBB on March 20, 2015, 05:56:13 PM
I will be moving there the end of the month, but what is GTG?
Just follow gagdetz to Maggie Valley in September. You'll have a lot of fun  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: DesertHOG on March 20, 2015, 11:23:52 PM
GTG = Get-To-Gether.. check the events boards for them.

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:

Also know as "that thing where everyone but Gary shows up to party..."
Title: Re: What did you do to or on your CVO today?
Post by: Screeper on March 21, 2015, 07:07:49 PM
(http://tapatalk.imageshack.com/v2/15/03/21/06248f53c2e005befb3b4ef66087fb37.jpg)

Took a ride around the Big Lake.


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: SHRK2TH on March 21, 2015, 09:06:30 PM
Well...50 degrees here in Iowa.  Grandson spent last night with us, took him home ( 1hr away ) this morning.  Forgot his suitcase that had the special blanket and bear in it.  Ok, went about our business this afternoon, then came home.  For you that have had children and know that your grandson is not going to make it to bed without the bear, it must be delivered.  So I fired up the bike, leathered up and decided I would go for a ride and take it to him. Now to get to the bike.   Most know now that it has a built 120X.
Been hearing a metal sound in the left muffler as they have Fullsac baffles / screens / packing.  Pulled it out, nothing there but screen.  Pulled the right, all there.  So I removed that.  Man, what a sound.  So today was a good test day out on the road.  Can easily hear radio, crack the throttle, you hear it.  With the Baker plus pan, and Jagg 10 row, oil temps reached 206, pressure stays around 57, and hauls azz.  I know some other members here have motors as such, you have to enjoy these machines as much as I do.  Now that I am home, hot tub time and  :drink: 
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on March 21, 2015, 09:29:12 PM
Well...50 degrees here in Iowa.  Grandson spent last night with us, took him home ( 1hr away ) this morning.  Forgot his suitcase that had the special blanket and bear in it.  Ok, went about our business this afternoon, then came home.  For you that have had children and know that your grandson is not going to make it to bed without the bear, it must be delivered.  So I fired up the bike, leathered up and decided I would go for a ride and take it to him. Now to get to the bike.   Most know now that it has a built 120X.
Been hearing a metal sound in the left muffler as they have Fullsac baffles / screens / packing.  Pulled it out, nothing there but screen.  Pulled the right, all there.  So I removed that.  Man, what a sound.  So today was a good test day out on the road.  Can easily hear radio, crack the throttle, you hear it.  With the Baker plus pan, and Jagg 10 row, oil temps reached 206, pressure stays around 57, and hauls azz.  I know some other members here have motors as such, you have to enjoy these machines as much as I do.  Now that I am home, hot tub time and  :drink:
Sounds like a great day for you in Iowa and I love hearing about your motor! How long have you had it?
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on March 21, 2015, 09:40:11 PM
(http://tapatalk.imageshack.com/v2/15/03/21/06248f53c2e005befb3b4ef66087fb37.jpg)

Took a ride around the Big Lake.


Sent from my iPhone using Tapatalk

Rode around Lake Oceechobee in Feb on a rented Ultra Limited Low. Very surprised and a bit disappointed when we found out we couldn't see the lake except for the small part where the bridge is. The sugar cane fields got boring pretty fast lol.

Here in Iowa riding around a lake is nice because you get the lake in your sight the whole time. Guess I was just a bit let down.
Title: Re: What did you do to or on your CVO today?
Post by: SHRK2TH on March 21, 2015, 09:46:41 PM
Sounds like a great day for you in Iowa and I love hearing about your motor! How long have you had it?

Had it done in November last year, now just turning 500 miles on it.  A dealership ( Faribault Harley) that specializes
in building these done it for me.  Plenty of power / torque, a solid 134 / 141.  IMO, wouldnt want much more.
Enclosed is the dyno tune.  There are many shops that can build a good motor, this shop was close enough,
and their reputation follows.
Title: Re: What did you do to or on your CVO today?
Post by: 2 ROSE on March 21, 2015, 10:56:50 PM
Rode around Lake Oceechobee in Feb on a rented Ultra Limited Low. Very surprised and a bit disappointed when we found out we couldn't see the lake except for the small part where the bridge is. The sugar cane fields got boring pretty fast lol.

Here in Iowa riding around a lake is nice because you get the lake in your sight the whole time. Guess I was just a bit let down.

I have never been to FLA so what I am about to say is completely in ignorance. But where SHRK2TH was riding, the topo is so damn flat that it's a wonder you can see anything. I am sure it is great riding in Florida during the winter season but if it is all flat as shown, I think I would be getting bored fairly soon. I mean give me some hills, some down hill twisties, some mountains... Something to make my seat pucker other than being blind sided by a pelican. Or am I missing something here??? ...or am I maybe just jealous??? :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on March 21, 2015, 11:29:24 PM
washed the bugs off of it...that i killed last year...boy am i lazzzzzy  :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: DesertHOG on March 22, 2015, 12:28:41 AM
Rode 550 miles today grabbing a few more captures on the scavenger hunt.

Title: Re: What did you do to or on your CVO today?
Post by: DesertHOG on March 22, 2015, 12:29:30 AM
Car On the Pole - Aztec, NM

Title: Re: What did you do to or on your CVO today?
Post by: DesertHOG on March 22, 2015, 12:30:16 AM
Giant Eye Glasses - Taos, NM
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on March 22, 2015, 12:51:18 AM
Rode 550 miles today grabbing a few more captures on the scavenger hunt.
Nice!
Title: Re: What did you do to or on your CVO today?
Post by: Screeper on March 22, 2015, 01:18:46 AM
washed the bugs off of it...that i killed last year...boy am i lazzzzzy  :nixweiss:

Thats why I have a cabin in Murphy NC.   I can say that riding down A!A on the beach during spring break has a lot more to see though....  I agree there is not much to see around the lake although I like stopping in at the various fish camps.....
Title: Re: What did you do to or on your CVO today?
Post by: OBB on March 22, 2015, 06:42:23 AM
I have never been to FLA so what I am about to say is completely in ignorance. But where SHRK2TH was riding, the topo is so damn flat that it's a wonder you can see anything. I am sure it is great riding in Florida during the winter season but if it is all flat as shown, I think I would be getting bored fairly soon. I mean give me some hills, some down hill twisties, some mountains... Something to make my seat pucker other than being blind sided by a pelican. Or am I missing something here??? ...or am I maybe just jealous??? :nixweiss:
You don't have to leave the 'Burgh's city limits for all that. Seems like every time I ride over there, I get stopped at multiple red lights and they're all uphill. :P
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on March 22, 2015, 07:02:52 AM
Well after a few months of not posting on this board due to the period of frozen, white, wind blown merriness that we hillbillies call hell, I finally got a chance to try out a new windshield that I installed on Orange Crush a while back. I decided to $h!tcan the stock wind splitter and go with a Memphis Shades 17 inch that kind of follows the original design in that all the hardware is black and the bottom is really dark as well.

The new shield is the perfect height to make a nice calm pocket of air for me and all the rattling, shaking and such that the stocke mailbox piece did is gone. Happy day!!!!

Regards SHRADER
Title: Re: What did you do to or on your CVO today?
Post by: Kosmic Ken on March 22, 2015, 01:11:23 PM
Not exactly done 'to' the CVO, but for it, ordered a jack from J&S - bikes will be coming out of storage soon.
You will love the jack! After looking at so many others I took the advice to buy the best - and J&S is it for sure. One suggestion - always jack it up to the top notch as it is a more comfortable feeling for stability. I just hate the mental picture I get of my CVO lying on its side on the garage floor should it ever go over. But, not to worry; you don`t even need tie downs on the J&S as it is so solid. Good buy!!
Title: Re: What did you do to or on your CVO today?
Post by: kiro on March 22, 2015, 01:15:54 PM
Thanks for the tip Ken. Should see the jack by mid week.
Title: Re: What did you do to or on your CVO today?
Post by: Twism_23 on March 22, 2015, 05:49:29 PM
Almost done with the bar change and moving of turn signals.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on March 22, 2015, 09:37:32 PM
Rode 550 miles today grabbing a few more captures on the scavenger hunt.

You're killing me Simon, still stuck at work off shore and your riding in Beautiful country.  Last Summer we were in Santa Fe, and rode the area a bit then up 84 to CO and over to Durango
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on March 22, 2015, 09:45:51 PM
I have never been to FLA so what I am about to say is completely in ignorance. But where SHRK2TH was riding, the topo is so damn flat that it's a wonder you can see anything. I am sure it is great riding in Florida during the winter season but if it is all flat as shown, I think I would be getting bored fairly soon. I mean give me some hills, some down hill twisties, some mountains... Something to make my seat pucker other than being blind sided by a pelican. Or am I missing something here??? ...or am I maybe just jealous??? :nixweiss:

Having Lived in Jacksonville FL for several years, also now going to FL, a couple times of year here is what I think.  We moved to TN from FL for the hills and curves and Mountains and lakes.

TN/NC, the Dragon 318 curves in 11 miles.  FL  11 curves in 318 miles.

That said, on of our favorite Rides is US one From Key Largo to Key West.  The ride is far from exciting or challenging.  However the beauty of having the Gulf of Mexico on on side and the Atlantic on the other sure makes it worth it.  We have done that trip 6 or 7 times now in march or April.  Headed to Key West 2 April for a nice ride and some Fun.
Title: Re: What did you do to or on your CVO today?
Post by: TXGator on March 22, 2015, 10:57:15 PM
200 miles today in N. FL with the wife and family.  Stopped for TexMex at Chuy's in Gainesville 70 to 75 degrees all day.  Plenty of scenery with grandfather oaks completely canvasing the road with slightly rolling hills.  I'll take it for a mid March ride in short sleeves.
Title: Re: What did you do to or on your CVO today?
Post by: 2 ROSE on March 22, 2015, 11:46:58 PM
You don't have to leave the 'Burgh's city limits for all that. Seems like every time I ride over there, I get stopped at multiple red lights and they're all uphill. :P

Yeah OBB, you are right. I can't argue with what you say. At least there are not many pelicans in the 'Burgh...to many deer, but very little pelicans. :)
Title: Re: What did you do to or on your CVO today?
Post by: DesertHOG on March 23, 2015, 01:38:52 AM
You're killing me Simon, still stuck at work off shore and your riding in Beautiful country.  Last Summer we were in Santa Fe, and rode the area a bit then up 84 to CO and over to Durango

You coming out to Ouray this June? Either way, drop me a PM when travel this way again.

Simon
Title: Re: What did you do to or on your CVO today?
Post by: cheeset202 on March 23, 2015, 06:47:12 AM
I moved from WA state last year to Louisiana, after having riding many roads on the West coast for 8 Years I was excited to try some different landscape taking a trip from Monroe LA to Key West FL.  It was a great trip for scenery, N. FL along the beaches, the Everglades, into Key Largo and out to Key West. The great thing about living in this country is the diversity of the landscape wherever you go. The only complaint I have of FL is there are too many people and too many traffic lights, hard to find a road you can escape on and cruise without having to stop for traffic and lights, unless you want to ride the interstate highways......boring.  This year it will be a road trip through N Miss, TN, and KY.  Looking forward to some hills and turns and a little less traffic.....I hope!
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on March 23, 2015, 08:16:39 AM
This year it will be a road trip through N Miss, TN, and KY.  Looking forward to some hills and turns and a little less traffic.....I hope!

Hills and turns/curves?  Definitely  :2vrolijk_21:

Less traffic?  Depends on when/where

Come on up.....
Title: Re: What did you do to or on your CVO today?
Post by: East Coast on March 23, 2015, 04:41:45 PM
Sounds like he needs a trip up to Deals Gap and ride the Tail of the Dragon!!  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on March 23, 2015, 06:10:06 PM
Sounds like he needs a trip up to Deals Gap and ride the Tail of the Dragon!!  :2vrolijk_21:

That's a good place to start but there are much more exciting roads in that area than the Dragon IMO!  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on March 23, 2015, 08:23:43 PM
You coming out to Ouray this June? Either way, drop me a PM when travel this way again.

Simon

Unfortunately the West coast GTG in Ouray is while I am off shore working, other wise I sure would be going.  I sure will drop you a PM when I am out that way again.

That's a good place to start but there are much more exciting roads in that area than the Dragon IMO!  :2vrolijk_21:

There sure are.  A few would be the Cherohala Skyway.  68 from Tellico into GA, 360 out of Tellico at the base of the Skyway.  Foothills parkway, Hwy 70 out of Lenoir City going west,  Hwy 30 out of Dayton going west and many more! 
Title: Re: What did you do to or on your CVO today?
Post by: cheeset202 on March 23, 2015, 09:11:58 PM

Sounds like he needs a trip up to Deals Gap and ride the Tail of the Dragon!!  :2vrolijk_21:

Yes planning to do the tail of the dragon, will compare to the dragon tail in Hells Canyon in ID or the back road to Mt St Helens.
Title: Re: What did you do to or on your CVO today?
Post by: 2 ROSE on March 23, 2015, 10:48:00 PM
Went to visit Rose today at the dealer. Made arrangements to pick her up April1st...can't wait. Snow on the ground in Pittsburgh this evening.
Title: Re: What did you do to or on your CVO today?
Post by: yanks178 on March 23, 2015, 11:13:11 PM
Not today but over the weekend entered my 10 CVO Ultra in a bike show for the first time and won!
Title: Re: What did you do to or on your CVO today?
Post by: GregKhougaz on March 23, 2015, 11:29:19 PM
Not today but over the weekend entered my 10 CVO Ultra in a bike show for the first time and won!

Congratulations!  But:    :worthless:
Title: Re: What did you do to or on your CVO today?
Post by: Screeper on March 24, 2015, 07:25:39 AM

Unfortunately the West coast GTG in Ouray is while I am off shore working, other wise I sure would be going.  I sure will drop you a PM when I am out that way again.

There sure are.  A few would be the Cherohala Skyway.  68 from Tellico into GA, 360 out of Tellico at the base of the Skyway.  Foothills parkway, Hwy 70 out of Lenoir City going west,  Hwy 30 out of Dayton going west and many more!

Foothills Parkway is a beautiful ride.  Motorcycle heaven up there.


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on March 24, 2015, 08:16:04 AM
Foothills Parkway is a beautiful ride.  Motorcycle heaven up there.


So true....if the g'vment would just complete it  >:(

We are blessed here in East TN with some great scenery and great roads to get us there. 
Title: Re: What did you do to or on your CVO today?
Post by: yanks178 on March 24, 2015, 09:06:56 AM
Congratulations!  But:    :worthless:

Title: Re: What did you do to or on your CVO today?
Post by: yanks178 on March 24, 2015, 09:07:41 AM
Don't know how to fix my pic.. sorry!
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on March 24, 2015, 09:31:32 AM
Fixed
Title: Re: What did you do to or on your CVO today?
Post by: 2 ROSE on March 24, 2015, 10:03:30 AM
Hey Yanks,
That's a nice trophy. You and the Misses must be mighty proud of her.
Don't know if you guys are out riding yet up north but when you do Stay Safe.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on March 24, 2015, 08:05:40 PM
Finally got a pix of my vent screens. Excuse the dirt. Took it out and of course got caught in the rain  >:(

(http://i275.photobucket.com/albums/jj306/ohiobellboy/2015%20Road%20Glide%20Ultra/vent%20screen%203_zpsco3hsbgz.jpg) (http://s275.photobucket.com/user/ohiobellboy/media/2015%20Road%20Glide%20Ultra/vent%20screen%203_zpsco3hsbgz.jpg.html)

(http://i275.photobucket.com/albums/jj306/ohiobellboy/2015%20Road%20Glide%20Ultra/vent%20screen%204_zpsejocqubp.jpg) (http://s275.photobucket.com/user/ohiobellboy/media/2015%20Road%20Glide%20Ultra/vent%20screen%204_zpsejocqubp.jpg.html)
Title: Re: What did you do to or on your CVO today?
Post by: yanks178 on March 24, 2015, 10:31:18 PM
Hey Yanks,
That's a nice trophy. You and the Misses must be mighty proud of her.
Don't know if you guys are out riding yet up north but when you do Stay Safe.

We do love our bike!!!  Only got about 400 miles on it this year.. not the best weather yet.  Bike is all clean, new tires, fresh oil and ready to go for another 15K season!
Title: Re: What did you do to or on your CVO today?
Post by: GregKhougaz on March 26, 2015, 12:47:36 AM
Ran into Dan who owns Otto's Porsche Service in Marina del Rey.  Here is his CVO Road Glide with a Pro Charger Turbo System.  He showed me his dyno sheet.  191 HP &  150 Ft. Lbs torque.  Terrific sounding bike.    :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: GregKhougaz on March 26, 2015, 12:55:32 AM
Right side.
Title: Re: What did you do to or on your CVO today?
Post by: charles05663 on March 26, 2015, 04:52:40 AM
Ran into Dan who owns Otto's Porsche Service in Marina del Rey.  Here is his CVO Street Glide with a Pro Charger Turbo System.  He showed me his dyno sheet.  191 HP &  150 Ft. Lbs torque.  Terrific sounding bike.    :2vrolijk_21:

Do you mean Road Glide?

 :oops: :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: CircleRacer on March 26, 2015, 05:46:36 AM
Looks good OBB better than looking at a empty hole
Title: Re: What did you do to or on your CVO today?
Post by: OBB on March 26, 2015, 06:17:30 AM
Looks good OBB better than looking at a empty hole
Thanks CR. We'll see how well I like cleaning them once bug season gets here. I'm sure it will be better than eating bugs shooting up through them though.
Title: Re: What did you do to or on your CVO today?
Post by: Phantom309 on March 26, 2015, 06:35:47 AM
Finally got a pix of my vent screens. Excuse the dirt. Took it out and of course got caught in the rain  >:(

(http://i275.photobucket.com/albums/jj306/ohiobellboy/2015%20Road%20Glide%20Ultra/vent%20screen%203_zpsco3hsbgz.jpg) (http://s275.photobucket.com/user/ohiobellboy/media/2015%20Road%20Glide%20Ultra/vent%20screen%203_zpsco3hsbgz.jpg.html)

(http://i275.photobucket.com/albums/jj306/ohiobellboy/2015%20Road%20Glide%20Ultra/vent%20screen%204_zpsejocqubp.jpg) (http://s275.photobucket.com/user/ohiobellboy/media/2015%20Road%20Glide%20Ultra/vent%20screen%204_zpsejocqubp.jpg.html)

Looks awesome! Did you end up making them yourself or take the easy way out? Either way ... I like'm and I say they should come from the factory like that but they would probably bang you an extra $500. Now for your next project, you need some LEDs to backlight them ... that would look killer in the dark.
Title: Re: What did you do to or on your CVO today?
Post by: Phantom309 on March 26, 2015, 06:40:16 AM
Ran into Dan who owns Otto's Porsche Service in Marina del Rey.  Here is his CVO Street Glide with a Pro Charger Turbo System.  He showed me his dyno sheet.  191 HP &  150 Ft. Lbs torque.  Terrific sounding bike.    :2vrolijk_21:

That would be a nice rush! Got any vids of it in action?
Title: Re: What did you do to or on your CVO today?
Post by: Phantom309 on March 26, 2015, 06:44:53 AM
Almost done with the bar change and moving of turn signals.

 :2vrolijk_21: Sweet ride and I also like your taste in exhaust!
Title: Re: What did you do to or on your CVO today?
Post by: 2 ROSE on March 28, 2015, 01:37:10 AM
Haven't done a damn thing with my cvo since the first week of December 2014 except go to the dealer and visit her. Scheduled to pick her up in four (4) days. Suppose to be sunny and in the 60's this coming wednesday in the Burgh...can't wait.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on March 28, 2015, 08:58:00 AM
Haven't done a damn thing with my cvo since the first week of December 2014 except go to the dealer and visit her. Scheduled to pick her up in four (4) days. Suppose to be sunny and in the 60's this coming wednesday in the Burgh...can't wait.

That's good news John  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: porthole on March 28, 2015, 10:06:35 AM
Pushed mine back over to the side to make room for appliances.
Title: Re: What did you do to or on your CVO today?
Post by: Chains on March 28, 2015, 01:02:46 PM
Ordered a Screamin Eagle Logo plate for my king tour pack.  Screamin will be one word on final product.
Title: Re: What did you do to or on your CVO today?
Post by: 2 ROSE on March 28, 2015, 01:22:21 PM
That's good news John  :2vrolijk_21:

Thanks Jess, counting the days....
Title: Re: What did you do to or on your CVO today?
Post by: Screeper on March 28, 2015, 03:45:51 PM
Dyno tuned mine at the dealership.  Feels good but I am no expert.  Looks like 99 rwhp and 112 torque.  Sounds good looks good.  I know the HO are likely flattening the torque curve a bit.  Not sure what I would gain by another path.  Anyway have a look.(http://tapatalk.imageshack.com/v2/15/03/28/f893f96bbeacf074d0355887da1df316.jpg)




Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: mnrider on March 28, 2015, 09:14:25 PM
Painted the heat shields.
Title: Re: What did you do to or on your CVO today?
Post by: Supershooter on March 29, 2015, 06:43:44 AM
Finished detailing, took pic, posted it for sale.
Supershooter
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on March 29, 2015, 06:51:16 AM
Finished detailing, took pic, posted it for sale.
Supershooter
Uh oh!
Title: Re: What did you do to or on your CVO today?
Post by: Supershooter on March 29, 2015, 06:58:13 AM
Uh oh!

I just want cash in hand when I buy the next one, and no worries, two other options in the garage to stay on two wheels if this one sells.
Supershooter
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on March 29, 2015, 07:28:39 AM
I just want cash in hand when I buy the next one, and no worries, two other options in the garage to stay on two wheels if this one sells.
Supershooter

Right on. Supposed to be 70 Monday and Tuesday here in good ol Iowa might get a ride in :) Got a new bike in mind?
Title: Re: What did you do to or on your CVO today?
Post by: Supershooter on March 29, 2015, 08:54:47 AM
A Black SESG
Supershooter
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on March 29, 2015, 06:59:27 PM
Upgraded the Kuryakyn driving lights to LED, finished installing the CD Dymanic Ringz and brought it out to see some sunshine.
If you'll notice I still have quite a bit of that white junk on the ground - about 6" or so - and overnight low temps below freezing which give the highway department an excuse to put more de-icing liquid down, it's forecast to warm up and rain this week so maybe we'll get out soon.....

Title: Re: What did you do to or on your CVO today?
Post by: knothead on March 29, 2015, 07:11:56 PM
Took her out to show her off a little this weekend, 832 miles later we made it back home
Title: Re: What did you do to or on your CVO today?
Post by: Nicky Pass on March 29, 2015, 11:54:08 PM
I bought a set of 4" Rinehart slip ons....now I just need the weather break here in Chicago!
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on March 30, 2015, 12:04:58 AM
Took her out to show her off a little this weekend, 832 miles later we made it back home
Very nice, I am jealous!
Title: Re: What did you do to or on your CVO today?
Post by: yanks178 on March 30, 2015, 10:09:16 AM
Currently 33 out here.. leaving for work and at about 1 leaving work to put some miles on today!
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on March 30, 2015, 03:57:51 PM
72 and sunny but we have a south "breeze" about 30mph. Gonna leave her in the garage.  :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on March 30, 2015, 08:52:55 PM
I lied. Wind died down I took the long way to work for the graveyard shift ;)
Title: Re: What did you do to or on your CVO today?
Post by: guitarider on March 31, 2015, 11:40:50 PM
Drove the 07 to and from work today, stopped at Scottsdale HD to order a throttle side heated grip replacement and ended up test driving a '15 CVO EG and now I have a BIG DECISION TO MAKE overnight. BTW it is the gold color, can't even remember the real name.
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on April 01, 2015, 07:31:42 AM
Drove the 07 to and from work today, stopped at Scottsdale HD to order a throttle side heated grip replacement and ended up test driving a '15 CVO EG and now I have a BIG DECISION TO MAKE overnight. BTW it is the gold color, can't even remember the real name.

Those are the kind of decisions that make life so fun....good luck on the choice and post pics of the new scooter for us if that's the road you take.... :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on April 02, 2015, 08:23:04 AM
Road the 13 SERK to SMHD to drop it off for the 15K service and new rear tire, and to Pick up the 15 SERGU.  Then road a few places doing errands to get ready to leave on the Bikes for Cape Coral and then on to Key West.

Got the paint matched lower facia put on.  I need to wire the light now.

Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on April 02, 2015, 08:24:01 AM
Another.
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on April 02, 2015, 08:33:55 AM
Love the blue, Dave.  The lower light addition sets off the rear (and gives you some much needed extra lights....can't have enough rear lighting).  K'ville West has an Abyss blue and a Burgundy blaze on the floor.  They are both beautiful colors but this year, the blue outshines the red one IMO....don't tell Chip I said that... ;D 

Have a great, safe trip to the Keys...
Title: Re: What did you do to or on your CVO today?
Post by: FreestateSE3 on April 02, 2015, 09:36:10 AM
Received the title from the bank.... :bananarock:
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on April 02, 2015, 11:45:37 AM
Received the title from the bank.... :bananarock:

Schweeeet!!   :bananarock:
Title: Re: What did you do to or on your CVO today?
Post by: OBB on April 02, 2015, 11:51:05 AM
Road the 13 SERK to SMHD to drop it off for the 15K service and new rear tire, and to Pick up the 15 SERGU.  Then road a few places doing errands to get ready to leave on the Bikes for Cape Coral and then on to Key West.

Got the paint matched lower facia put on.  I need to wire the light now.
Should be a pigtail on the light that just goes up the inner fender and plugs into the stock light. I'm surprised the dealer didn't do that for you. When I added mine I bought the light for the '09 and it was plug and play.
Title: Re: What did you do to or on your CVO today?
Post by: T-Roy on April 02, 2015, 05:08:12 PM
I took a short road trip down the bayou today to get a pound of the best beef jerky known to man, from Bourgeois Meat Market in Thibodeaux Louisiana.
Title: Re: What did you do to or on your CVO today?
Post by: T-Roy on April 02, 2015, 05:09:39 PM
Then I came home and installed my new windshield.
Title: Re: What did you do to or on your CVO today?
Post by: Delta on April 02, 2015, 05:12:38 PM
Put the stock mufflers back on. Went to the dealer for the annual bike inspection. It's free for as long as I own the bike and wanted to make sure I passed.
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on April 02, 2015, 05:52:39 PM
Had a chance to put on the new Screamin Eagle shift linkage after being out of town the last couple weeks.
Title: Re: What did you do to or on your CVO today?
Post by: cambo on April 02, 2015, 06:21:47 PM
250 miles with John and Brian to Gettysburg and back. Life's good.

(https://farm9.staticflickr.com/8724/16391474034_922d6dfb85_b.jpg) (https://flic.kr/p/qYsAah)

Cam
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on April 02, 2015, 06:25:49 PM
I took a short road trip down the bayou today to get a pound of the best beef jerky known to man, from Bourgeois Meat Market in Thibodeaux Louisiana.

Looking good brother.  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on April 02, 2015, 07:47:38 PM
I took a short road trip down the bayou today to get a pound of the best beef jerky known to man, from Bourgeois Meat Market in Thibodeaux Louisiana.




 Garden and Gun magazine’s article, “100 Southern Foods You Absolutely, Positively Must Try Before You Die” (http://gardenandgun.com/article/100-southern-foods) which names Bourgeois Beef Jerky first on the list.



Ooooo sounds like a road trip for so me beef jerky could be coming up. Haven't been to Thibodeaux in years now I have a excellent reason to cruse through.

Title: Re: What did you do to or on your CVO today?
Post by: T-Roy on April 02, 2015, 07:50:17 PM



 Garden and Gun magazine’s article, “100 Southern Foods You Absolutely, Positively Must Try Before You Die” (http://gardenandgun.com/article/100-southern-foods) which names Bourgeois Beef Jerky first on the list.



Ooooo sounds like a road trip for so me beef jerky could be coming up. Haven't been to Thibodeaux in years now I have a excellent reason to cruse through.

If you do let me know and if I am not working we will ride.
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on April 02, 2015, 07:52:05 PM
If you do let me know and if I am not working we will ride.




You got it !    :2vrolijk_21:







Title: Re: What did you do to or on your CVO today?
Post by: Puma on April 02, 2015, 09:40:18 PM
Received the title from the bank.... :bananarock:
Congrats. I love that feeling, but I've got a long way to go to experience it again. :biggthumpup:
Title: Re: What did you do to or on your CVO today?
Post by: Puma on April 02, 2015, 09:43:23 PM
Finally rode it. I mean REALLY rode it. 65 degrees in Central Jersey today. :sunny:
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on April 02, 2015, 09:45:00 PM
Finally rode it. I mean REALLY rode it. 65 degrees in Central Jersey today. :sunny:

Congrats! We've been very fortunate this year I have had mine out about 5 times already. Took another short cruise today.
Title: Re: What did you do to or on your CVO today?
Post by: Puma on April 02, 2015, 10:04:14 PM
Congrats! We've been very fortunate this year I have had mine out about 5 times already. Took another short cruise today.
thanks. How do you get that picture to always appear after your posts? It's a beautiful shot and a sweet ride.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on April 02, 2015, 10:20:30 PM
thanks. How do you get that picture to always appear after your posts? It's a beautiful shot and a sweet ride.

Thank you! You should ask RKW.  :D

Just kidding I will PM you lol.
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on April 03, 2015, 06:14:25 PM





Stripped all my add-on parts off the Ultra in anticipation of trading it in for the Road Glide.  ;D



Title: Re: What did you do to or on your CVO today?
Post by: cmcarr88 on April 03, 2015, 10:26:10 PM
dropped a lot of dead weight ..... and added some FullSac .....
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on April 03, 2015, 10:36:35 PM
dropped a lot of dead weight ..... and added some FullSac .....


 :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: MGCVO on April 04, 2015, 10:35:06 AM
Installed some LEDs today the install took less than 4 hrs. I don’t know if I even like LEDs but I can’t ride the bike due to bad Massachusetts weather so all I do is work on it. This weather has to break soon.

https://www.youtube.com/watch?v=3LwvxMkme_M
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on April 04, 2015, 10:50:50 AM
Installed some LEDs today the install took less than 4 hrs. I don’t know if I even like LEDs but I can’t ride the bike due to bad Massachusetts weather so all I do is work on it. This weather has to break soon.

https://www.youtube.com/watch?v=3LwvxMkme_M
Very nice. Thanks for sharing.
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on April 04, 2015, 07:10:16 PM
I made momma a happier passenger by giving her another switch to play with -- this one gives her Volume, Bass, Treble, Balance and Fade control, she now has full control of the audio system features from the passenger seat. By adding an additional switch she gets to maintain  all the intercom controls too.

Happy wife = Happy life  ;)
Title: Re: What did you do to or on your CVO today?
Post by: ptnlinda on April 05, 2015, 01:11:01 AM
Finally took the bike for a ride after fitting the Fuelmoto Jackpot 2-1-2 Stainless Steel Header pipes with my CFR Mufflers and Thundermax ECU. What a difference, totally different bike, revs much more freely and more responsive. Very happy with the result. All went on relatively easily and well worth the effort.
Title: Re: What did you do to or on your CVO today?
Post by: Grizzly on April 05, 2015, 09:43:33 AM
I made momma a happier passenger by giving her another switch to play with -- this one gives her Volume, Bass, Treble, Balance and Fade control, she now has full control of the audio system features from the passenger seat. By adding an additional switch she gets to maintain  all the intercom controls too.

Happy wife = Happy life  ;)

What a heck of a nice guy!
 :2vrolijk_21:

Talented too!
Title: Re: What did you do to or on your CVO today?
Post by: 911Shark on April 07, 2015, 03:29:29 PM
Put on saddle bag rear lid lights, rear fender facsia with light, cool little bug lights in the antenna holes, and tourpack rack airwing light. Feel like a trucker, but my wife is happy
Title: Re: What did you do to or on your CVO today?
Post by: Grizzly on April 07, 2015, 05:05:56 PM
Put on saddle bag rear lid lights, rear fender facsia with light, cool little bug lights in the antenna holes, and tourpack rack airwing light. Feel like a trucker, but my wife is happy

Looks amazing!

Could you please inform us what parts were used and total cost for the lit rear fascia?

Thanks in advance.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on April 07, 2015, 06:39:41 PM
Put on saddle bag rear lid lights, rear fender facsia with light, cool little bug lights in the antenna holes, and tourpack rack airwing light. Feel like a trucker, but my wife is happy
You're about 2 lights shy of looking like a wing  :P
Title: Re: What did you do to or on your CVO today?
Post by: rob 62 on April 07, 2015, 08:23:23 PM
dropped a lot of dead weight ..... and added some FullSac .....
Are they out of the road king?
Title: Re: What did you do to or on your CVO today?
Post by: rob 62 on April 07, 2015, 08:27:57 PM
a little handle bar bling.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on April 07, 2015, 08:32:37 PM
a little handle bar bling.
Painted controls,  nice!
Title: Re: What did you do to or on your CVO today?
Post by: fadefree on April 10, 2015, 10:01:32 AM
I replaced the ridiculous rear brake pedal with an E-Z BRAKE
Title: Re: What did you do to or on your CVO today?
Post by: baddyna96 on April 10, 2015, 12:32:23 PM
Installed my new color match tour Pak today.
Title: Re: What did you do to or on your CVO today?
Post by: FXD_TG on April 10, 2015, 12:38:48 PM
Left it in the garage and took the BMW to meet the lovely Miss Debbie for our every other Friday lunch date...  Truck was in the shop, so it had to be one of the bikes: BMW always wins out for crappy weather vs. the Harley's. I equate Harleys to pleasure and the BMW to all-weather transportation and try not to cross the beams!

Title: Re: What did you do to or on your CVO today?
Post by: Puma on April 10, 2015, 04:08:01 PM
a little handle bar bling.
That looks GREAT!! Now I recommend the custom dynamicz Dynamic Ringz in your turn signals. It's as easy as replacing the bulb and no load equalizer needed for your 2014.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on April 10, 2015, 04:09:02 PM
That looks GREAT!! Now I recommend the custom dynamicz Dynamic Ringz in your turn signals. It's as easy as replacing the bulb and no load equalizer needed for your 2014.

Waiting for the UPS guy for my Ringz and Equalizer!!!

Dammit just checked not supposed to arrive until Monday  >:(
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on April 10, 2015, 04:20:18 PM
Waiting for the UPS guy for my Ringz and Equalizer!!!

Dammit just checked not supposed to arrive until Monday  >:(
Jesse you hear that??.... tick, tick, tick.... that's time ticking away on your digital watch. :devil: :huepfenlol2: :huepfenlol2:

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on April 10, 2015, 04:22:30 PM
Jesse you hear that??.... tick, tick, tick.... that's time ticking away on your digital watch. :devil: :huepfenlol2: :huepfenlol2:

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:

Tell me about it lol...
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on April 10, 2015, 07:36:22 PM
Waiting for the UPS guy for my Ringz and Equalizer!!!

Dammit just checked not supposed to arrive until Monday  >:(

Shoulda sprung for overnight shipping  :huepfenlol2:

You'll like 'em when you get them, install is easy. I did have to change the connectors on the equalizer because the Ultra harness is different from the others, but even that was accomplished without incident.
Title: Re: What did you do to or on your CVO today?
Post by: Puma on April 10, 2015, 09:14:58 PM
Shoulda sprung for overnight shipping  :huepfenlol2:

You'll like 'em when you get them, install is easy. I did have to change the connectors on the equalizer because the Ultra harness is different from the others, but even that was accomplished without incident.
BRIGHT
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on April 10, 2015, 09:15:12 PM
Shoulda sprung for overnight shipping  :huepfenlol2:

You'll like 'em when you get them, install is easy. I did have to change the connectors on the equalizer because the Ultra harness is different from the others, but even that was accomplished without incident.

Speaking of connectors, when my new yaffe stealth plate arrived, the light wouldn't work. I ended up having to swap the 2 wires in the duetch connector. Go figure, 2 wires and still got it wrong lol.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on April 11, 2015, 11:56:39 AM
Look what the mailman brought :)(http://images.tapatalk-cdn.com/15/04/11/c841e48f9136bead71f611ddd9ab8112.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on April 11, 2015, 04:51:32 PM
Let there be light!
(http://images.tapatalk-cdn.com/15/04/11/2809d138c3557088dba95f6b9aee9a15.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on April 11, 2015, 04:53:50 PM
:)

(http://images.tapatalk-cdn.com/15/04/11/e8908c3e9a1e01ca21917981aa20fa61.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: T-Roy on April 11, 2015, 07:00:12 PM
Let there be light!
(http://images.tapatalk-cdn.com/15/04/11/2809d138c3557088dba95f6b9aee9a15.jpg)

Looks great.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on April 11, 2015, 07:12:17 PM
Loving the visibility. Simple install. $140 invested.
Title: Re: What did you do to or on your CVO today?
Post by: JoeVibe on April 11, 2015, 07:31:09 PM
Installed a HDBomm unit today, with a little help from Jim,  and it works very well. Also put my new personalized plate on.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on April 11, 2015, 07:34:14 PM
Installed a HDBomm unit today, with a little help from Jim,  and it works very well. Also put my new personalized plate on.
Awesome. I ordered a personalized plate still waiting for it.
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on April 11, 2015, 07:36:02 PM
Installed a HDBomm unit today, with a little help from Jim,  and it works very well. Also put my new personalized plate on.
Nice!!!! Are those stickers  (Bar & Shield/Screamin' Eagle) or does TN offer that as a vanity plate?

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on April 11, 2015, 07:44:19 PM
Nice!!!! Are those stickers  (Bar & Shield/Screamin' Eagle) or does TN offer that as a vanity plate?

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:

If TN offers that plate design it will be yet one more reason to relocate........
Title: Re: What did you do to or on your CVO today?
Post by: JoeVibe on April 11, 2015, 07:45:24 PM
Nice!!!! Are those stickers  (Bar & Shield/Screamin' Eagle) or does TN offer that as a vanity plate?

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:

They're stickers Dood. When I picked up the plate it was too plain so I gave it my own personalization.
Title: Re: What did you do to or on your CVO today?
Post by: JoeVibe on April 11, 2015, 07:46:41 PM
If TN offers that plate design it will be yet one more reason to relocate........

Come on down!! I'll fix you up!
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on April 11, 2015, 07:48:47 PM
I actually might be soon...... :-X
Title: Re: What did you do to or on your CVO today?
Post by: JoeVibe on April 11, 2015, 07:52:26 PM
I actually might be soon...... :-X

 :2vrolijk_21:  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on April 11, 2015, 07:55:56 PM
I actually might be soon...... :-X
Won't be far from ya hopefully. Planning a move to Upcountry South Carolina in about 2-3 years.
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on April 11, 2015, 08:01:11 PM
Won't be far from ya hopefully. Planning a move to Upcountry South Carolina in about 2-3 years.

You might be able to stop by for a spell on the way by. I'm currently pursuing a transfer within the company I work for to the Nashville area. hoping to git 'r done by the time the Maggie Valley  GTG comes around.
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on April 11, 2015, 08:08:29 PM
They're stickers Dood. When I picked up the plate it was too plain so I gave it my own personalization.
Nice job :2vrolijk_21:

 :pumpkin:
Ride Safe,
Fired00d
:fireman:
Title: Re: What did you do to or on your CVO today?
Post by: cambo on April 11, 2015, 08:43:38 PM
300 miles with jpb from Leesburg VA to York PA and back. Had a great time. Thanks John!

https://www.flickr.com/photos/33856264@N03/16492646924/

(https://farm8.staticflickr.com/7645/16492628824_01892ba88f_c.jpg) (https://flic.kr/p/r8p2Xo)

Cam
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on April 11, 2015, 09:26:42 PM



Bought the 09 SERG this morning; spent the day riding from Chattanooga up through the Cherohala Skyway then through the Dragon.
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on April 11, 2015, 09:27:42 PM
At one of the HD stores

Title: Re: What did you do to or on your CVO today?
Post by: Grizzly on April 11, 2015, 10:37:17 PM


Bought the 09 SERG this morning; spent the day riding from Chattanooga up through the Cherohala Skyway then through the Dragon.

That's gotta be one of the best days spent yet!  :2vrolijk_21:

Congrats on your beautiful new ride.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on April 11, 2015, 10:58:17 PM


Bought the 09 SERG this morning; spent the day riding from Chattanooga up through the Cherohala Skyway then through the Dragon.
Jealous. Did that last June. Can't beat it.
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on April 12, 2015, 07:49:47 AM
That's gotta be one of the best days spent yet!  :2vrolijk_21:

Congrats on your beautiful new ride.




It was certainly one for the memory book. Thanks
Title: Re: What did you do to or on your CVO today?
Post by: OBB on April 12, 2015, 04:25:44 PM
FINALLY got the chance to get out and enjoy it for a short 100 mile trip to lunch and back. Broke 500 miles while we were at it ::) . Had the infotainment system lock up on me before we left the drive. Loaded a map and told it to start, had the ipod hooked up and playing then started the bike. The screen went to the FM mode and wouldn't change. Had no sound other than the nav voice. First stop I pulled the radio fuse for 10 seconds and put it back in. Worked fine after that. This GPS unit will take some getting used to for sure. It kept wanting me to get off the highway even though I didn't have any avoidance settings set and my preferred route was quickest. Gonna have to find a different windshield as Debi says she gets a lot of wind on the back with the top vent open. I'm thinking something with a recurve at the top like the LRS I had on my '11.
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on April 12, 2015, 06:14:54 PM
Did something I haven't done in waaaayyy to long. I RODE IT  :bananarock:
We went out for the afternoon to enjoy the (finally) spring temps, it was almost 70* today. It felt great getting on the bike after the winter we've had. I have no idea how many miles we actually went, but we did have to stop for gas   :2vrolijk_21: My wife likes the third audio control I installed, although she's still figuring out how to work the system because she's not used to being able to control the full range of the HK functions. She wanted to change the station and ended up cranking the volume  ::)- it was entertaining having her experiment with the controls. That being said I can't see why they don't come set up like this from the factory?? One thing that I like is I no longer have to guess if the volume is at a level she can enjoy, she already was changing stations whenever the mood struck her so I've almost gotten used to ignoring the stereo while we're riding two -up.
Title: Re: What did you do to or on your CVO today?
Post by: GregKhougaz on April 12, 2015, 09:13:34 PM
Attended the Heros' Ride today part of which took place at the Los Angeles National Cemetery.  Fully escorted ride through Hollywood,  Beverly Hills, Westwood, and the Freeways of Los Angeles. 
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on April 12, 2015, 09:55:09 PM
Attended the Heros' Ride today part of which took place at the Los Angeles National Cemetery.  Fully escorted ride through Hollywood,  Beverly Hills, Westwood, and the Freeways of Los Angeles.




 :bananarock:
Title: Re: What did you do to or on your CVO today?
Post by: phantomxrt on April 12, 2015, 09:59:47 PM
Attended the Heros' Ride today part of which took place at the Los Angeles National Cemetery.  Fully escorted ride through Hollywood,  Beverly Hills, Westwood, and the Freeways of Los Angeles.

Cool. Very cool.
Title: Re: What did you do to or on your CVO today?
Post by: GregKhougaz on April 12, 2015, 10:02:23 PM
Cool. Very cool.
Great shot!

 (http://images.tapatalk-cdn.com/15/04/12/14f0a0a1df65304dda5878cc314dbcaf.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: phantomxrt on April 12, 2015, 10:07:55 PM
Thanks Greg.

Isn't it just. A picture tells a thousand words....
Title: Re: What did you do to or on your CVO today?
Post by: ZVO on April 13, 2015, 09:37:58 AM
rode to New Rochelle, then Great Neck, NY. Love the 61 degrees weather.
Title: Re: What did you do to or on your CVO today?
Post by: guitarider on April 13, 2015, 10:30:59 AM
Road from Cave Creek to Wickenburg out here in AZ with Mrs Guitarrider and two friends. Stopped at a great Breakfast joint in Wickenburg called The Horseshoe Cafe!!  Great food and a great ride
Title: Re: What did you do to or on your CVO today?
Post by: ZVO on April 13, 2015, 08:26:27 PM
Installed LeD chrome turn signals from HD I didn't really like the smoked Lense look

Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on April 15, 2015, 10:45:04 PM
Not much, between a long stretch of travel, rain while I'm home or road construction, I have been pretty much grounded.  I'm looking for a turn for the better, but this weekend looks like rain.
Title: Re: What did you do to or on your CVO today?
Post by: Nicky Pass on April 16, 2015, 09:24:01 AM
Picked up from getting Power Duals and 4" Rineharts installed, I flashed my Fuelmoto Map and took a 20 mile ride home....I live 3 miles from the dealer.
Title: Re: What did you do to or on your CVO today?
Post by: TheGullGuy on April 16, 2015, 12:30:29 PM
The Gilded One is going into the shop for the third time within 1,000 miles, shocks won't hold air.  She's not too happy and neither am I.
Title: Re: What did you do to or on your CVO today?
Post by: kiro on April 16, 2015, 03:36:28 PM
Ordered a show polished Grade 8 Stainless Engine Kit from Alloyboltz today to dress the scoot up a bit. I read on the internet this will make it go faster, so it must be true - lol...
Title: Re: What did you do to or on your CVO today?
Post by: OBB on April 16, 2015, 04:16:49 PM
Picked up from getting Power Duals and 4" Rineharts installed, I flashed my Fuelmoto Map and took a 20 mile ride home....I live 3 miles from the dealer.
Sounds good. You're up to what, 21 miles on it now?  :)
Title: Re: What did you do to or on your CVO today?
Post by: ganev on April 16, 2015, 05:03:22 PM
Just installed this.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on April 16, 2015, 07:55:30 PM
Just installed this.
I love the looks of that air cleaner. I'm just too cheap to spend the money on it.
Title: Re: What did you do to or on your CVO today?
Post by: Boatman on April 16, 2015, 09:42:48 PM
X2
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on April 17, 2015, 01:27:52 PM
(http://images.tapatalk-cdn.com/15/04/17/60b6e9a460d3370c9741a350d5c165dd.jpg)

New personalized plate :)
Title: Re: What did you do to or on your CVO today?
Post by: Bav on April 17, 2015, 01:37:35 PM
Filed a warranty claim for pitting on the chrome shifter link on my 14 SERK

(http://images.tapatalk-cdn.com/15/04/17/3c64a1b25d6216ead67266199f4e5b5d.jpg)


Sent from my iPad using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: TrainWreck88 on April 17, 2015, 01:56:17 PM
Rode her to work


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: OBB on April 17, 2015, 02:35:52 PM
(http://images.tapatalk-cdn.com/15/04/17/60b6e9a460d3370c9741a350d5c165dd.jpg)

New personalized plate :)
Is that the same as half of an S-curve? Lol
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on April 17, 2015, 02:52:01 PM
Is that the same as half of an S-curve? Lol
Something like that Mike lol.
Title: Re: What did you do to or on your CVO today?
Post by: T-Roy on April 17, 2015, 03:22:02 PM
Filed a warranty claim for pitting on the chrome shifter link on my 14 SERK

(http://images.tapatalk-cdn.com/15/04/17/3c64a1b25d6216ead67266199f4e5b5d.jpg)


Sent from my iPad using Tapatalk

Mine did the same thing so I replaced it under warranty, sold the new one to a buddy, and used the money toward the purchase of this one.
Title: Re: What did you do to or on your CVO today?
Post by: Bav on April 17, 2015, 03:46:00 PM

Mine did the same thing so I replaced it under warranty, sold the new one to a buddy, and used the money toward the purchase of this one.

That's just what I was thinking. I would like a non stock one but thought if it's a warranty job I may as well get it replaced for now.


Sent from my iPad using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: TrainWreck88 on April 18, 2015, 04:51:06 PM
Rode it to work and it is 75 clear and I just want to ride


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: martys on April 18, 2015, 05:27:11 PM
FINALLY  :pepper: :pepper: :pepper:  Got the Triple Red out into the wind today  :2vrolijk_21: :2vrolijk_21:  17c degrees (65f) and sunny  :) Diane also took her bike out and we went for a 200 km (120 mi) ride for the first time this season  :coolblue:  It was great to get out  :2vrolijk_21:

Marty
Title: Re: What did you do to or on your CVO today?
Post by: GregKhougaz on April 18, 2015, 06:19:27 PM
Tulare County Peace Officers' Memorial Run. 100 miles around the Central Valley and my riding partner had the same bike.
Title: Re: What did you do to or on your CVO today?
Post by: TinSpinner on April 18, 2015, 06:55:07 PM
I stopped and looked at my bike on the way out today and said "Soon baby, real soon". Monsoon season has set in here in GA which has kept my riding down to a minimum. I don't know how you guys up north stand to have one parked for so many months every year, a few weeks for me and I get antsy.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on April 18, 2015, 06:59:51 PM
I stopped and looked at my bike on the way out today and said "Soon baby, real soon". Monsoon season has set in here in GA which has kept my riding down to a minimum. I don't know how you guys up north stand to have one parked for so many months every year, a few weeks for me and I get antsy.
I'm sure I speak for the majority when I say IT SUCKS!
Like anything in life, you take the good with the bad. Trucks will sit parked now unless it's raining out. Have 3 trips planned this year on the bike. TX,WV, and Maggie Valley.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on April 18, 2015, 07:31:14 PM
I'm sure I speak for the majority when I say IT SUCKS!
Like anything in life, you take the good with the bad. Trucks will sit parked now unless it's raining out. Have 3 trips planned this year on the bike. TX,WV, and Maggie Valley.
No Sturgis Mike?
Title: Re: What did you do to or on your CVO today?
Post by: OBB on April 18, 2015, 09:08:51 PM
No Sturgis Mike?
Nope. Might make it some year. Wife only has 2 weeks vacation and I'd want to take that long to spend as much time as we could out there. Not really into the big rallies as I'm not crazy about huge crowds and vendors. The GTGs from the two bike forums I frequent most and the truck clubs I'm on are in very comfortable for me. I might do it once just to be able to say "been there, done that".
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on April 18, 2015, 09:11:40 PM
Nope. Might make it some year. Wife only has 2 weeks vacation and I'd want to take that long to spend as much time as we could out there. Not really into the big rallies as I'm not crazy about huge crowds and vendors. The GTGs from the two bike forums I frequent most and the truck clubs I'm on are in very comfortable for me. I might do it once just to be able to say "been there, done that".

I'm not the typical Sturgis partier. Don't drink booze, never stay out past dusk. We really enjoy the rally crowds and all. We love to people watch and the riding is some of the best in the country and you know I get around on my bike. Good times. I am only a days drive though (650 miles). That makes it easier to go. Probably our last time since we plan to move SE.
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on April 18, 2015, 09:46:37 PM





Took it apart to clean and wax, added a couple of goodies and watched it rain all day from the garage.




Hope to ride tomorrow afternoon.  :nixweiss:
Title: What did you do to or on your CVO today?
Post by: Bav on April 19, 2015, 08:56:21 AM
Got her all back together after a thorough strip down clean which was necessary due to a very wet and muddy ride out the other day. I can't take her to St Tropez in a few weeks looking less than immaculate can I? She can now proudly step out from her winter slumber wearing her new goodies with pride:

Black rear bag guards
Slipstream highway pegs
Heat Demons heated grips
Moto Dynamic LED projector headlamp
LED aux lights with repositioned turn signals with smoked lenses
Visors on all front lamps

Now all I need to do is get out there and ride


(http://images.tapatalk-cdn.com/15/04/19/d418fc8d1802829eaa91f3072d39c0a7.jpg)

(http://images.tapatalk-cdn.com/15/04/19/d9b1c5cef09557506492c2220314215a.jpg)

(http://images.tapatalk-cdn.com/15/04/19/6ba2f6d800029adf941568e6c15cc8be.jpg)

(http://images.tapatalk-cdn.com/15/04/19/9ec3f67c4975021d2a33b4824bca2c26.jpg)


Sent from my iPad using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on April 19, 2015, 11:04:44 AM
I took a short road trip down the bayou today to get a pound of the best beef jerky known to man, from Bourgeois Meat Market in Thibodeaux Louisiana.

You are very correct on that Jerky.  We have it out on the rig all the time.
Title: Re: What did you do to or on your CVO today?
Post by: bigC on April 19, 2015, 05:29:44 PM
I added a Chopped Tour Pack with the detachable solo set up.
Title: Re: What did you do to or on your CVO today?
Post by: East Coast on April 19, 2015, 08:07:29 PM
Got her all back together after a thorough strip down clean which was necessary due to a very wet and muddy ride out the other day. I can't take her to St Tropez in a few weeks looking less than immaculate can I? She can now proudly step out from her winter slumber wearing her new goodies with pride:

Black rear bag guards
Slipstream highway pegs
Heat Demons heated grips
Moto Dynamic LED projector headlamp
LED aux lights with repositioned turn signals with smoked lenses
Visors on all front lamps

Now all I need to do is get out there and ride


The bike looks great! I really like the primary inspection cover you have, where did you purchase it? Any info is greatly appreciated!

Erich
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on April 20, 2015, 12:22:35 AM
Got her all back together after a thorough strip down clean which was necessary due to a very wet and muddy ride out the other day. I can't take her to St Tropez in a few weeks looking less than immaculate can I? She can now proudly step out from her winter slumber wearing her new goodies with pride:

Black rear bag guards
Slipstream highway pegs
Heat Demons heated grips
Moto Dynamic LED projector headlamp
LED aux lights with repositioned turn signals with smoked lenses
Visors on all front lamps

Now all I need to do is get out there and ride


(http://images.tapatalk-cdn.com/15/04/19/d418fc8d1802829eaa91f3072d39c0a7.jpg)

(http://images.tapatalk-cdn.com/15/04/19/d9b1c5cef09557506492c2220314215a.jpg)

(http://images.tapatalk-cdn.com/15/04/19/6ba2f6d800029adf941568e6c15cc8be.jpg)

(http://images.tapatalk-cdn.com/15/04/19/9ec3f67c4975021d2a33b4824bca2c26.jpg)


Sent from my iPad using Tapatalk
Really looks terrific!!
Title: Re: What did you do to or on your CVO today?
Post by: Bav on April 20, 2015, 03:17:51 AM
The bike looks great! I really like the primary inspection cover you have, where did you purchase it? Any info is greatly appreciated!

Erich

Hi Erich,

See attached thread about the derby cover

http://www.cvoharley.com/smf/index.php?topic=98604.msg1279215#msg1279215

Dave
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on April 20, 2015, 07:40:14 AM
Washed the SERK as it did nothing but rain all day, she is now put up ready to ride when I get home from work in 21 days.
Title: Re: What did you do to or on your CVO today?
Post by: ZVO on April 20, 2015, 10:26:16 AM
looked at my bike...smiled...turned the garage light on and off just to make sure I wasn't dreaming.
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on April 21, 2015, 10:34:02 PM


Hope to ride tomorrow afternoon.  :nixweiss:






and ride we did.   :2vrolijk_21:



Title: Re: What did you do to or on your CVO today?
Post by: Nicky Pass on April 21, 2015, 11:41:56 PM
Clay barred the paint and started my polish and waxing process on my 50 mile bike.  It's cold, windy and drizzling in Chicago, and it's not supposed to get above 55 in the next 5 days.
Title: Re: What did you do to or on your CVO today?
Post by: ZVO on April 25, 2015, 09:01:58 AM
replaced the stock turn signal lights with the HD Led amber lights.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on April 25, 2015, 09:39:50 AM
replaced the stock turn signal lights with the HD Led amber lights.
Any pics?
Title: Re: What did you do to or on your CVO today?
Post by: ZVO on April 25, 2015, 09:40:46 AM
(http://images.tapatalk-cdn.com/15/04/25/6c1335ec7ce56a41899349f088068a55.jpg)


2015 Street Glide CVO Mercury HCC
Title: Re: What did you do to or on your CVO today?
Post by: ONE2BAJA on April 25, 2015, 09:42:59 AM


washed it!...suppose to rain all weekend!
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on April 25, 2015, 09:43:26 AM
Nice. Reminds me of the center of my dynamic ringz.
Title: Re: What did you do to or on your CVO today?
Post by: FXD_TG on April 25, 2015, 05:03:19 PM
Just got around to cleaning-off the crud that didn't wash-off from the Daytona trip before we head down to Panama City Beach.  A Zaino touch-up, if you will: PC cleaner, CS clear-seal with the Z5 polish curing as we speak that gets followed-up with a final coat of CS.  Should be good for the rest of spring & summer.

(https://ridingtwoup.files.wordpress.com/2015/04/20150425_164121.jpg?w=800)
Title: Re: What did you do to or on your CVO today?
Post by: longlast on April 27, 2015, 09:40:16 AM
A little bit a go I posted in the pic thread of my last bike payment. So now I've a bit more ££,..(pounds) for some little additions

Title: Re: What did you do to or on your CVO today?
Post by: longlast on April 27, 2015, 09:41:31 AM
2
Title: Re: What did you do to or on your CVO today?
Post by: longlast on April 27, 2015, 09:43:10 AM
3
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on April 27, 2015, 10:28:54 AM
Good deal, Pete.  How's it feeling with the old girl paid for?
Title: Re: What did you do to or on your CVO today?
Post by: longlast on April 27, 2015, 02:12:19 PM
Good deal, Pete.  How's it feeling with the old girl paid for?

It's a total sense of complete freedom Howard, like looking in your review mirror you know that is all behind ya :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: TNCarters on April 27, 2015, 09:08:53 PM
Ordered a 14" Freedom Shield and sold my wifes VStar 250.  Guess she's officially a Back Seat Rider now.
Title: Re: What did you do to or on your CVO today?
Post by: ONE2BAJA on April 27, 2015, 09:54:19 PM


Congrats on the last payment!  Move on and enjoy minute !
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on April 28, 2015, 09:10:21 AM
Ordered a 14" Freedom Shield and sold my wifes VStar 250.  Guess she's officially a Back Seat Rider now.

Well if that's the case, you got a great new scoot and comfortable accommodations for which she can sit... :2vrolijk_21:

My wife rode dirt bikes for years and had her own street bike for a bit.  After riding behind me, she saw all that which she missed as a driver and loves the back seat viewing.  She's still a great rider but I'm glad she's sitting right behind me now...although it was fun when she was riding her own, too....  :)
Title: Re: What did you do to or on your CVO today?
Post by: TNCarters on April 28, 2015, 01:48:32 PM
My Wifes not on here so I can say this without grief.  I actually enjoy riding without the extra person on board.  She's very small but it does change the weight and handling of the bike.  Enjoy her going but not 100% of the time which is usually the case anyway.   Guess we ride for different reasons.  I ride for the scenery and enjoyment of the bike and she rides for the social experience.
Title: Re: What did you do to or on your CVO today?
Post by: kiro on April 28, 2015, 02:31:53 PM
Got the bikes out of storage last weekend - yes! Still kind of on the chilly side so haven't done any detailing yet. Received an engine kit from AlloyBoltz, Polished Grade 8 stainless steel and plan to do the changeover soon.
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on April 28, 2015, 02:34:00 PM
My Wifes not on here so I can say this without grief.  I actually enjoy riding without the extra person on board. 

I'm gonna tell...... ;D :yes: :evilgrin: :zroflmao: :mad:
Title: Re: What did you do to or on your CVO today?
Post by: JCZ on April 28, 2015, 02:47:32 PM
My Wifes not on here so I can say this without grief.  I actually enjoy riding without the extra person on board.  She's very small but it does change the weight and handling of the bike.  Enjoy her going but not 100% of the time which is usually the case anyway.   Guess we ride for different reasons.  I ride for the scenery and enjoyment of the bike and she rides for the social experience.

I think most of us feel the same way....that's why we schedule "guys only" rides.   :P
Title: Re: What did you do to or on your CVO today?
Post by: Schnobel on April 28, 2015, 05:16:06 PM
My Wifes not on here so I can say this without grief.  I actually enjoy riding without the extra person on board.  She's very small but it does change the weight and handling of the bike.  Enjoy her going but not 100% of the time which is usually the case anyway.   Guess we ride for different reasons.  I ride for the scenery and enjoyment of the bike and she rides for the social experience.

My wife has no interest in riding with me. Fell off the back of her Uncle's scooter when she was a kid and doesn't like to ride. He was going slow down her street so didn't get hurt but gave her a healthy fear of them. Throw in 10 years she spent as a trauma tech in a major metro hospital ER where she witnessed the aftermath of 100's of motorcycle accidents, pretty much sealed the deal for her.

Got her on the back of my King in 03 before we had kids. Was a huge accomplishment the couple times she went with me but hasn't been on one since I went head over tea kettle in 05 and totaled the aforementioned RK. Bought the Ultra thinking she would feel safe on the back of it but so far nada!
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on April 28, 2015, 07:37:21 PM
I can't get my wife off my bike. She loves it back there!  :o
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on April 28, 2015, 08:50:03 PM
My wife while we had Children at home rode on back with me about 70% of the time I went for pleasure rides not to work.  I enjoyed her riding with me, and preferred it when she went.

March of 07, right after the youngest moved out, she took the MSRF safety class, and promptly told me she wanted to ride, and her own bike.  April 15 2007 she took delivery of a 07 883 Low.  Said she would still sometime want to ride on back with me, or not go at all.

So, since then five or maybe six times she has been on back of my bike.   :coolblue:

I love that she rides with me most all the time, on her own bike.  I now really do not like riding a passenger any more.

She rides lot's and will out ride a good portion of the men.  Runs the curves hard enough on her road glide that she has scrapped the floor boards more than once.  She will also ride back to back 700 mile plus days with me.

Being off shore working all I could do was look at pictures of my CVO's and think about rides to take when I hit land again.
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on April 28, 2015, 09:16:50 PM
I can't get my wife off my bike. She loves it back there!  :o

Same here, if I try and "escape" for an afternoon ride she'll almost always catch me before I get to the end of the driveway and then I get "the look". If your married you know what look I'm alluding to  ;)   --- unless I take the Ducati, she rode on the pillion of that one ONCE for about 1/4 mile before telling me to turn it around and take her home, she hates that thing  :huepfenlol2:
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on April 28, 2015, 10:38:58 PM
My Wifes not on here so I can say this without grief.  I actually enjoy riding without the extra person on board.  She's very small but it does change the weight and handling of the bike.  Enjoy her going but not 100% of the time which is usually the case anyway.   Guess we ride for different reasons.  I ride for the scenery and enjoyment of the bike and she rides for the social experience.
Been married for almost 26 years and she has never been into riding with me which is awesome! Her dad was a motor cop for 20 years so she has no problem with bikes or with me riding one but its just not her thing. We will meet somewhere for lunch or dinner while she does her thing and I ride. In my opinion it makes for a very happy marriage. I did used to feel guilty leaving in the morning and riding all day and just meeting up somewhere but around a year ago she went to work in retail at Nordstroms since our kids are all now in college so she now works every weekend so we will have breakfast together and she leaves for work and I go and do my thing completely guilt free. Its never been better!
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on April 29, 2015, 06:30:36 PM
Fresh coat of Royal Blue!
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on April 29, 2015, 06:31:39 PM
.
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on April 29, 2015, 07:44:26 PM
Fresh coat of Royal Blue!
Jesse.... looks like you had some help... or at the least a "supervisor". :D :D

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on April 29, 2015, 08:37:49 PM
Jesse.... looks like you had some help... or at the least a "supervisor". :D :D

 umpkin:
Ride Safe,
Fired00d
 :fireman:
Supervisor!
Title: Re: What did you do to or on your CVO today?
Post by: JCZ on April 29, 2015, 09:09:53 PM
Been married for almost 26 years and she has never been into riding with me which is awesome! Her dad was a motor cop for 20 years so she has no problem with bikes or with me riding one but its just not her thing. We will meet somewhere for lunch or dinner while she does her thing and I ride. In my opinion it makes for a very happy marriage. I did used to feel guilty leaving in the morning and riding all day and just meeting up somewhere but around a year ago she went to work in retail at Nordstroms since our kids are all now in college so she now works every weekend so we will have breakfast together and she leaves for work and I go and do my thing completely guilt free. Its never been better!

Interesting story.  I'm glad it all works out for both of you.  I know some couples where she doesn't care for riding and it's not working out so well. 

I was asked once (well, maybe more than once) "how do you get away with it......how are you able to ride every weekend and go as far or as long as you want without the issues that some of us have?".  I told him "I've rode all my life....it's who I am and when I meet a woman I don't change or hide that part of who I am.  I let them know right up front.....this is what I do....this is who I am......most of the time you're welcome to ride along if you'd like but sometimes it's just the guys.....other times, it's just me".  So the motorcycling has never been an issue.

It kind of weeds itself out very early in a new relationship....if they don't truely enjoy it then it'll come to the surface in short order.

So what I did today (and all this week) is ride to and from work.  And, as you know Alan, it was 90F today.  Gettin to hot to ride for more than the 25 minutes it takes me to get home.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on April 29, 2015, 09:50:44 PM
Ordered another part for it  ;)
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on April 29, 2015, 10:22:06 PM
Ordered another part for it  ;)

What now?


As for the wife riding or not riding, I enjoy a solo ride here and there but I love it when my wife joins me and am very happy she is so enthusiastic about motorcycling. She supports all of my purchases and loves to see the end results.   :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on April 29, 2015, 11:04:28 PM
Interesting story.  I'm glad it all works out for both of you.  I know some couples where she doesn't care for riding and it's not working out so well. 

I was asked once (well, maybe more than once) "how do you get away with it......how are you able to ride every weekend and go as far or as long as you want without the issues that some of us have?".  I told him "I've rode all my life....it's who I am and when I meet a woman I don't change or hide that part of who I am.  I let them know right up front.....this is what I do....this is who I am......most of the time you're welcome to ride along if you'd like but sometimes it's just the guys.....other times, it's just me".  So the motorcycling has never been an issue.

It kind of weeds itself out very early in a new relationship....if they don't truely enjoy it then it'll come to the surface in short order.

So what I did today (and all this week) is ride to and from work.  And, as you know Alan, it was 90F today.  Gettin to hot to ride for more than the 25 minutes it takes me to get home.
It was crazy hot today but it looks like you should have great weather for the ride this weekend.
Title: Re: What did you do to or on your CVO today?
Post by: wrayzor on April 30, 2015, 12:09:53 AM
Did a 10000 mile service. Oil was dirty as crap!
Title: Re: What did you do to or on your CVO today?
Post by: JCZ on April 30, 2015, 10:15:54 AM
What now?


As for the wife riding or not riding, I enjoy a solo ride here and there but I love it when my wife joins me and am very happy she is so enthusiastic about motorcycling. She supports all of my purchases and loves to see the end results.   :2vrolijk_21:

Rut-rohhh.....I've been down that road.....a couple of times.  The crystal ball says I see a second motorcycle sitting in your garage in the new future.   :huepfenlol2:
Title: Re: What did you do to or on your CVO today?
Post by: BladeRun on April 30, 2015, 07:55:30 PM
Replaced the stock shield with a Freedom Shields 15" dark grey tint. Took it for a test ride before taking the protective wrap off of the shield and found it to be smoother than with the stock shield.  Plus I like the tinted look. 
Title: Re: What did you do to or on your CVO today?
Post by: OBB on April 30, 2015, 08:18:26 PM
Replaced the stock shield with a Freedom Shields 15" dark grey tint. Took it for a test ride before taking the protective wrap off of the shield and found it to be smoother than with the stock shield.  Plus I like the tinted look. 
:worthless:
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on April 30, 2015, 08:54:59 PM
Rut-rohhh.....I've been down that road.....a couple of times.  The crystal ball says I see a second motorcycle sitting in your garage in the new future.   :huepfenlol2:
Once the kids are all out on their own I'd encourage it ;)
Title: Re: What did you do to or on your CVO today?
Post by: BladeRun on May 01, 2015, 09:00:10 AM
Replaced the stock shield with a Freedom Shields 15" dark grey tint. Took it for a test ride before taking the protective wrap off of the shield and found it to be smoother than with the stock shield.  Plus I like the tinted look.

(http://i917.photobucket.com/albums/ad12/BladeRun43/Sharky/IMG_3355.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: Puma on May 01, 2015, 01:36:50 PM
My Wifes not on here so I can say this without grief.  I actually enjoy riding without the extra person on board.  She's very small but it does change the weight and handling of the bike.  Enjoy her going but not 100% of the time which is usually the case anyway.   Guess we ride for different reasons.  I ride for the scenery and enjoyment of the bike and she rides for the social experience.
I hate riding with a passenger, but there was a time when I thought it would be nice to have the boss with me sometimes. She
was on my '08 Kawi Vulcan 1600 a few times. That bike was nothing but problems, so I traded it on a Heritage when the 2010's came out. I figured that big comfy seat with the backrest and some passenger floorboards that I put on would work for her. She was never able to get comfy. Factor in that she has M.S. which affects her balance, and the fact that she's afraid back there, and I am actually glad she won't go anymore. A side benefit is I was able to switch to a cool looking C&C Fastback. That saddle is great for me, but the little bit of leather covered padding that extends onto the fender is pretty much cosmetic.
Title: Re: What did you do to or on your CVO today?
Post by: JCZ on May 02, 2015, 10:17:51 PM
painted my Screamin Eagle red, and painted my vents.

So is it a CVO or not?  :nixweiss:    http://www.cvoharley.com/smf/index.php?topic=101782.msg1315972#msg1315972
Title: What did you do to or on your CVO today?
Post by: MrSurly on May 03, 2015, 10:26:44 PM
After doing some recent engine work to her, I took Cracklin' Rose to Steve at GMR to get the guru-tune and she did 120/118.
Flattest prettiest torque curve a fella could ask for.

(http://images.tapatalk-cdn.com/15/05/03/5231f54c26e4fd8adbc31fcc25941463.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: OBB on May 04, 2015, 06:42:21 AM
After doing some recnt engine work to her I took Cracklin' Rose to Steve at GMR to get the guru-tune and she did 120/118.
Flattest prettiest torque curve a fella could ask for.

(http://images.tapatalk-cdn.com/15/05/03/5231f54c26e4fd8adbc31fcc25941463.jpg)
Very nice!  :2vrolijk_21:

So I have to ask, what all engine work has been done to it?
Title: Re: What did you do to or on your CVO today?
Post by: MrSurly on May 04, 2015, 10:21:23 AM
Very nice!  :2vrolijk_21:

So I have to ask, what all engine work has been done to it?
Thanks for asking(!)
The build:
2010 110 c.i.
Stock bottom end
SE 10.5 Pistons
030 cometic
Dan Vance Welded Floor 110 heads
S&S 660 beehives
Stock size 110 valves
Adjustable Fuel Moto p/rods
Woods directional lifters
T-man 660SM cam
inner cam bearings
SE 58mm TB.  (smoothed)
SE 5.3 injectors
SE Ventilator AC
Dragos Dragula  2:1 (the original)
2.55 baffle
Power Vision Tuner
AT110 auto-tune kit
Barnett Scorpion VPC
GMR Tune on the PV

 Most of the mods were last year, Latest cams and heads I did last weekend.
Various other cams could be swapped into this motor at this point and make bigger numbers (maybe much bigger) but they likely would lose the nice torque curve.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on May 04, 2015, 12:56:38 PM
Leave it alone and ride it. That sheet is a beauty.

Nice work Steve.

Jesse
Title: Re: What did you do to or on your CVO today?
Post by: Bromebe on May 04, 2015, 02:34:09 PM
spent a couple of hours cleaning the damn "Love Bugs" off of it after a hour and a half 100 mile ride
I'm pretty sure that is how they make super glue,
with Love bugs!

went thru a good portion of bug and tar remover

Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on May 04, 2015, 02:44:32 PM
spent a couple of hours cleaning the damn "Love Bugs" off of it after a hour and a half 100 mile ride
I'm pretty sure that is how they make super glue,
with Love bugs!

went thru a good portion of bug and tar remover

Mike, went through a "nest" of those little boogers in Florida few years back on I-75 toward Tampa.  Shore du make a mess uv tings.  And I thought June bugs were bad.... >:(  Feel for all you-uns that put up with these on a regular basis....as Leonardo eloquently put it playing Howard Hughes concerning aphids "they're just nasty little creatures"....would also describe love bugs
Title: Re: What did you do to or on your CVO today?
Post by: WVHoop on May 04, 2015, 06:54:43 PM
First ride of the year, rode to Guilford State Park near Lisbon Ohio. Beautiful day!!
Title: Re: What did you do to or on your CVO today?
Post by: WVHoop on May 04, 2015, 06:57:19 PM
Friends 100th Anniversery Springer & my 12 SESG
Title: Re: What did you do to or on your CVO today?
Post by: OBB on May 04, 2015, 07:41:24 PM
Friends 100th Anniversery Springer & my 12 SESG
Mark's Landing (http://www.markslanding.com/). Usually a hot spot for bikes on any nice weekend day. Been there many times myself. Only about a 40 minute ride for me.
Title: Re: What did you do to or on your CVO today?
Post by: MrSurly on May 04, 2015, 09:39:16 PM
Just returned from my first ride of the year, down to the Texas Hill Country to meet with about forty friends and ride the Three Sisters. It was a blast and the weather was perfect.
My new tune made even better.(http://images.tapatalk-cdn.com/15/05/04/fee9de10741bc0b4e9ff5ec093cc8e5f.jpg)


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on May 04, 2015, 10:04:21 PM
Just returned from my first ride of the year, down to the Texas Hill Country to meet with about forty friends and ride the Three Sisters. It was a blast and the weather was perfect.
My new tune made even better.(http://images.tapatalk-cdn.com/15/05/04/fee9de10741bc0b4e9ff5ec093cc8e5f.jpg)


Sent from my iPhone using Tapatalk
Hell yes!  Ride safe!
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on May 05, 2015, 05:49:13 PM
finally got it tuned with the new Dragos2 pipe and went with a TTS tuner, the tune was with a cocktail of 87 & 91 octain fuel, not a bad deal since i cant always find the 91 and thats how the 87 wound up in the tank. best i can tell is it has a lot more grunt/ throttle response on the bottom end and fuel mileage is 37 to 41mpg range, WFO its still stupid fast. thoughts  :nixweiss:   
Title: Re: What did you do to or on your CVO today?
Post by: Chains on May 05, 2015, 06:23:28 PM
Today was going to be deep clean day for my new acquisition. So as I stood looking at the bike I though they let's start under the seat its always dirty. I was right filthy cleaned right up.   Thinking what to clean next ( thinking is what got me in trouble) I opt to remove the battery and clean under it too. 

Now I have had this bike for all of 2 days, one spent riding it home plus being a guy why bother to see if the owners manual has any advice on this procedure. 

Why because when you unhook the battery the freak in siren and lights will wake the dead. OK now its time to get the book out and find the proper procedure for battery removal. Sure try to concentrate in the garage with all the racket. After about 10 minutes I figured it out. Cleaned under it and put it back in. 

Should have had it on video, many have won Americas Funniest.   I had to look like a rooster doing its dance around a hen when the freak in alarm went off. So much for deep clean.

May need to post this in humor because now it seems funny but sure wasn't when it happened.  :huepfenlol2:
Title: Re: What did you do to or on your CVO today?
Post by: FL CVO on May 05, 2015, 07:29:00 PM
Simply rode to work. I live about 30 minutes from the base. Along the way, picked up another AF guy, 2 Marines, and a Navy rider, all in uniform on our Harleys. All I could think was - 'MERICA!

Sent from my KFAPWI using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on May 05, 2015, 08:22:48 PM
finally got it tuned with the new Dragos2 pipe and went with a TTS tuner, the tune was with a cocktail of 87 & 91 octain fuel, not a bad deal since i cant always find the 91 and thats how the 87 wound up in the tank. best i can tell is it has a lot more grunt/ throttle response on the bottom end and fuel mileage is 37 to 41mpg range, WFO its still stupid fast. thoughts  :nixweiss:

Fred what made ya ride up to Ernie's in Boji? Figured being in the Bluffs area you would have access to a good HD shop?

Jesse
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on May 05, 2015, 10:42:27 PM
Fred what made ya ride up to Ernie's in Boji? Figured being in the Bluffs area you would have access to a good HD shop?

Jesse
J, lets just say the talent pool aint as deep as one would think so i gave Doc1 a shout and he pointed me that direction, Frank also recommended them. thinking about heading up to FD to get a lesson on how clean and wax a bike,  ;) thats my next move...get the poor thing cleaned up
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on May 05, 2015, 10:44:39 PM
J, lets just say the talent pool aint as deep as one would think so i gave Doc1 a shout and he pointed me that direction, Frank also recommended them. thinking about heading up to FD to get a lesson on how clean and wax a bike,  ;) thats my next move...get the poor thing cleaned up
Haha. I frequent Ernie's in Algona  (sister store). Tom Schneider is my guy there. He says his boy builds the engines at the Boji location. 

How's the tune?
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on May 05, 2015, 11:00:43 PM
 :2vrolijk_21:  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: martys on May 05, 2015, 11:58:19 PM
Today was going to be deep clean day for my new acquisition. So as I stood looking at the bike I though they let's start under the seat its always dirty. I was right filthy cleaned right up.   Thinking what to clean next ( thinking is what got me in trouble) I opt to remove the battery and clean under it too. 

Now I have had this bike for all of 2 days, one spent riding it home plus being a guy why bother to see if the owners manual has any advice on this procedure. 

Why because when you unhook the battery the freak in siren and lights will wake the dead. OK now its time to get the book out and find the proper procedure for battery removal. Sure try to concentrate in the garage with all the racket. After about 10 minutes I figured it out. Cleaned under it and put it back in. 

Should have had it on video, many have won Americas Funniest.   I had to look like a rooster doing its dance around a hen when the freak in alarm went off. So much for deep clean.

May need to post this in humor because now it seems funny but sure wasn't when it happened.  :huepfenlol2:
:huepfenlol2: :huepfenlol2: It's sometimes funny where our OCD will bring us "EH" Jim  :2vrolijk_21: Glad you can laugh about it now My Friend   :huepfenlol2: :huepfenlol2:  :drink:


Marty
Title: Re: What did you do to or on your CVO today?
Post by: Chains on May 06, 2015, 12:04:22 AM
Marty, it is funny when you think about it.  A grown man dancing around like he has ants in his pants in the garage with a ear piercing siren going off.  Never to old to learn a new trick, when on doubt read instructions prior to proceeding further.  Glad I wasn't flying a airplane.
Title: Re: What did you do to or on your CVO today?
Post by: Supershooter on May 06, 2015, 09:53:15 PM
Haha. I frequent Ernie's in Algona  (sister store). Tom Schneider is my guy there. He says his boy builds the engines at the Boji location. 

How's the tune?

Christian,  is the man when it comes to building and tuning at Boji, he has taken really good care of me. He'll get the next one too, if he's still there. He does frequent this site too.
Supershooter

Ps I rose mine Thursday, Saturday and Sunday 350 miles with my bride we had an awesome time together with the kiddos at G&G.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on May 06, 2015, 09:54:04 PM
Used it to kill some bugs  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: East Coast on May 08, 2015, 09:30:38 PM
Installed a Fullsac DX head pipe and a set of 4" Rineharts then took my daughter for a quick ride.  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: martys on May 09, 2015, 12:38:35 AM
We went out this evening for a 150 mi. ride to watch My Daughters baseball game,  and terminated a handful of Southern Ontario's finest flying creatures  :nervous: :nervous
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on May 09, 2015, 12:46:06 AM
124 is in! Hoping to start breaking in next weekend and then up to Bob in Hayward for the tune. Very excited!
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on May 09, 2015, 12:49:51 AM
124 is in! Hoping to start breaking in next weekend and then up to Bob in Hayward for the tune. Very excited!
Using Diamond Engineering 12 point on all the hardware. I love the way it looks and thrilled to be done with those da-- Hot Toppers. Going to have a burning ceremony for the silicone gun..
Title: Re: What did you do to or on your CVO today?
Post by: JCZ on May 09, 2015, 10:19:03 AM
So not only performance but a motor that looks really nice, too.

I'm anxious for you Alan.  Kind of feels like it did when I was having my last 110 built.  Please, please don't offer for me to ride it.  It'd be like a drug and I'm an addict "first one's free buddy". :P  Then I'd have to be selling my soul to step up to a 124".  I'm telling myself (at 64) "come on JC...you're an old man.  You have to start acting like one".  :nervous:   Naw!  :bananarock:
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on May 09, 2015, 11:02:32 AM
124 is in! Hoping to start breaking in next weekend and then up to Bob in Hayward for the tune. Very excited!
looking good  :2vrolijk_21: so i take it you didnt find any thing out of norm with the comp/clutch and related parts under that cover...you didnt sneak one of those new baker comps in there did you?? updates soon i hope
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on May 09, 2015, 12:29:39 PM
looking good  :2vrolijk_21: so i take it you didnt find any thing out of norm with the comp/clutch and related parts under that cover...you didnt sneak one of those new baker comps in there did you?? updates soon i hope
Yea, it was in good shape so no Baker. I needed a financial break somewhere though the tech was pitching me on the Baker anyway, the "till" is empty..
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on May 09, 2015, 12:31:49 PM
So not only performance but a motor that looks really nice, too.

I'm anxious for you Alan.  Kind of feels like it did when I was having my last 110 built.  Please, please don't offer for me to ride it.  It'd be like a drug and I'm an addict "first one's free buddy". :P  Then I'd have to be selling my soul to step up to a 124".  I'm telling myself (at 64) "come on JC...you're an old man.  You have to start acting like one".  :nervous:   Naw!  :bananarock:
I was actually hoping you would put the "break in" miles on for me  8)
You know one of these days I will get you to "throw a leg" over..
Title: Re: What did you do to or on your CVO today?
Post by: kiro on May 09, 2015, 04:26:35 PM
Finally got around to mounting my Screamin' Eagle emblem... It's still in the mid-50 degrees here today - was hoping it would be warmer.
Title: Re: What did you do to or on your CVO today?
Post by: TNCarters on May 09, 2015, 07:16:13 PM
Got my 1st service wrapped up at dealer and while there had to add a little bling so picked up the chrome trim for the rear tour pack lights and antenna area.  Dealership owner was all smiles today.  They had a customer swap sale today and must have had 200 people there.  Heard the sales bell at least 3 times while I was there.  Also finally got around to remounting my gremlin bell that was taken off the Limited I traded in.  My 14" Freedom Windshield is in transit at the local UPS center but they are closed today.  Guess I'll be seeing it Monday.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on May 15, 2015, 08:42:23 AM
New bars.  Factory 47 2015 road glide bars, 14".  I have a full review and comparison to Yaffe Monkey bars in the road glide ultra section.

Title: Re: What did you do to or on your CVO today?
Post by: Chains on May 15, 2015, 08:59:48 AM
Added Phase 7 headlight (compliments of Haird) and passing lights from Eastern Performance.
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on May 15, 2015, 09:07:26 AM
Good deal, Jim.  Glad it worked out for ya, brother....those should attract lots of Alabama bugs... ;D
Title: Re: What did you do to or on your CVO today?
Post by: hrchdog on May 15, 2015, 02:52:18 PM
I took it for a ride after I finished installing the Fullsac DX pipe, crossover pipe, 2" cores with muffler sleeves and TTS Mastertune.
Title: Re: What did you do to or on your CVO today?
Post by: CVO City Lights on May 16, 2015, 08:20:05 AM
Added 330 more LED's for a total of 647
Title: Re: What did you do to or on your CVO today?
Post by: jachd17 on May 16, 2015, 09:12:42 AM
Added 330 more LED's for a total of 647

 Holy smoke.......I see an increase in U.F.O. reports in your area :huepfenjump3:
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on May 16, 2015, 10:57:40 PM
Been patiently waiting for a set of Harley-Davidson Slotted Stem Profile Custom Mirrors to appear on eBay. Lost by a buck last week. Was able to score a set of gently used ones today for $91.01 shipped. Jon @ Horny Toad quoted me $118 and some change to my door so I think this was a nice find.

Jesse
Title: Re: What did you do to or on your CVO today?
Post by: MrSurly on May 16, 2015, 11:52:18 PM
Good job on the mirrors


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on May 17, 2015, 01:33:10 AM
Good job on the mirrors


Sent from my iPhone using Tapatalk
Thank you Surly one.
Title: Re: What did you do to or on your CVO today?
Post by: Zee110 on May 17, 2015, 11:24:26 AM
Jswerve is that old shed in your yard . Nice pic  ;D
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on May 17, 2015, 11:39:00 AM
Jswerve is that old shed in your yard . Nice pic  ;D

Haha no sir. It's just west of Webster City, IA some dudes old shed/garage right off of hwy 17. Made for a good pic!  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Zee110 on May 17, 2015, 11:54:26 AM
Haha no sir. It's just west of Webster City, IA some dudes old shed/garage right off of hwy 17. Made for a good pic!  :2vrolijk_21:
[ /quote] 

Sure did good find ! :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Nicky Pass on May 17, 2015, 02:21:42 PM
Had Vance and Hines floorboard spacer installed because Vance and Hines doesn't tell CVO owners that they seed them.....so the spacers are installed, a new rear floorboard arm is ordered as well as a new heat shield that will take 4-6 weeks to get. 
Title: Re: What did you do to or on your CVO today?
Post by: wrayzor on May 17, 2015, 11:11:42 PM
While following my friends to Laughlin for the annual river run, I noticed that both had anniversary badges on the back of their passenger seat mounts; one a 100th and one a 105th, yet me following in my 110th had notta. After research and seeing HD didn't make one, I decided to make my own. Thanks to ebay, I found 2 emblems and did this: What do you think?
(http://i61.tinypic.com/11uvtds.jpg)
(http://i61.tinypic.com/2ic1v9u.jpg)
(http://i60.tinypic.com/sb7iih.jpg)
(http://i60.tinypic.com/1zyuh3d.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: OBB on May 18, 2015, 06:35:00 AM
While following my friends to Laughlin for the annual river run, I noticed that both had anniversary badges on the back of their passenger seat mounts; one a 100th and one a 105th, yet me following in my 110th had notta. After research and seeing HD didn't make one, I decided to make my own. Thanks to ebay, I found 2 emblems and did this: What do you think?
(http://i61.tinypic.com/11uvtds.jpg)
(http://i61.tinypic.com/2ic1v9u.jpg)
(http://i60.tinypic.com/sb7iih.jpg)
(http://i60.tinypic.com/1zyuh3d.jpg)
I like it  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: MrSurly on May 18, 2015, 04:49:05 PM
Well done! The badge in the front really stands out!
Title: Re: What did you do to or on your CVO today?
Post by: wrayzor on May 18, 2015, 07:22:28 PM
Well done! The badge in the front really stands out!

Not sure if I'm sold on the emblem on the front, but its on with double-sided tape.
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on May 18, 2015, 08:26:45 PM
I Didn't to anything to exciting today, just changed the lube in all three holes in preparation for our road trip to Ribfest.
Title: Re: What did you do to or on your CVO today?
Post by: Jswerve on May 21, 2015, 06:22:21 PM
New mirrors.
(http://images.tapatalk-cdn.com/15/05/21/122d947e82a7cc828c7a8c6dcc2a974a.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on May 22, 2015, 02:20:01 AM
After almost 2 months and a boatload of dough my bike will be back "in the wind" this weekend. Blew up my 120r and after beating myself up with all the why, what's, I am picking up my bike with a 124 (yea, should have put in the S&S in the first place) ready to go tomorrow. They put in a fat break in tune today and I will start Sat with my break in which I hate doing but then up to Bob in Hayward for the tune. The dealer has been letting my rent either Limiteds or Roadglides for almost nothing a few weekends but those 103's just didn't do it for me though it certainly was interesting playing with the new models. Not sure how long it will take to actually pay for this da-- motor but can't wait to get back on the road on my own bike!
Here is a pic yesterday.
Title: Re: What did you do to or on your CVO today?
Post by: rob 62 on May 22, 2015, 07:29:03 PM
powder coated switch housings and chromed inner primary.
Title: Re: What did you do to or on your CVO today?
Post by: rob 62 on May 22, 2015, 07:34:46 PM
Love my C.V.O.'s
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on May 22, 2015, 07:41:12 PM
Love my C.V.O.'s
(http://www.cvoharley.com/smf/index.php?action=dlattach;topic=89705.0;attach=281097;image)
Looks like you have an affinity for Corvettes too. :2vrolijk_21: :)

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: CreeseHD on May 22, 2015, 08:52:35 PM
Added 330 more LED's for a total of 647

Looking awesome!  Who's lights are you using?  Just trying to get some insight.  I have custom dynamics magical wizards with the ccm 5 remote.  I have roughly 300 lights.  They look awesome sitting still, but every time I try to ride with them, I pop a fuse.  I'm thinking maybe I have too many for the command center remote, or a pinched wire somewhere that would be a pita to chase down. Or maybe the new ccm 5 can't handle the charging system of the 14 cvo. Who knows... But yours look great!!  ;D
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on May 22, 2015, 11:01:31 PM
After almost 2 months and a boatload of dough my bike will be back "in the wind" this weekend. Blew up my 120r and after beating myself up with all the why, what's, I am picking up my bike with a 124 (yea, should have put in the S&S in the first place) ready to go tomorrow. They put in a fat break in tune today and I will start Sat with my break in which I hate doing but then up to Bob in Hayward for the tune. The dealer has been letting my rent either Limiteds or Roadglides for almost nothing a few weekends but those 103's just didn't do it for me though it certainly was interesting playing with the new models. Not sure how long it will take to actually pay for this da-- motor but can't wait to get back on the road on my own bike!
Here is a pic yesterday.
Took my first ride today and couldn't be happier! I took it very easy but loved what I did feel. I will be having fun for the next 3 days (hopefully if nothing goes wrong..)
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on May 30, 2015, 11:30:50 AM
Took my first ride today and couldn't be happier! I took it very easy but loved what I did feel. I will be having fun for the next 3 days (hopefully if nothing goes wrong..)
Sooo, hows it going with the new power plant? i assume no news is good news  :nixweiss: and it runs so good you dont want to stop riding
Title: Re: What did you do to or on your CVO today?
Post by: OBB on May 30, 2015, 04:40:49 PM
Installed the Motorcycle Armor on my bag lids and the sides of the tank right in front of the seat. Hopefully that will help keep it in better shape.
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on May 30, 2015, 08:27:26 PM
Sooo, hows it going with the new power plant? i assume no news is good news  :nixweiss: and it runs so good you dont want to stop riding
did 700 plus miles and loved every minute. I did go to the desert on the 3rd day (Temp in low 90's) and got i little pinging so its time for the real tune. Sending it up to Bob in Hayward on the 9th and then its really "party time"! I will post up after that.
Title: Re: What did you do to or on your CVO today?
Post by: wachuko on June 01, 2015, 06:41:13 AM
Took it in for the latest recall on the clutch master cylinder. M-1402 Recall 0165
Title: Re: What did you do to or on your CVO today?
Post by: CVORoadKing2013 on June 01, 2015, 07:55:47 AM
Not the kind of what did you do to your bike you want
I think I bent my Wild1 chubby's 16" apes.

Stupid mistake. I was backing out of a parking spot the other night and my foot slipped. I had no choice but to lay it down gently. I muscled the bike back up and was fully ready to see scratches and marks on the bag. It was dark so I could not do a good check until the next day. To my surprise no real marks:)

So I washed up the bike and we went for a ride. Only to notice that the left side of the bar seemed further away from the windshield that the right. Stopped to make sure the windshield was on good and it was.

Has anyone else ever bent apes trying to pick the bike up or could there be something simpler going on.
Title: Re: What did you do to or on your CVO today?
Post by: BladeRun on June 01, 2015, 10:12:11 AM
Installed the Motorcycle Armor on my bag lids and the sides of the tank right in front of the seat. Hopefully that will help keep it in better shape.

Who makes this? Looking for the same place you installed it, the sides of the tank.  This thread has already cost me some $, why not more! lol
Title: Re: What did you do to or on your CVO today?
Post by: bkervaski on June 01, 2015, 10:25:40 AM
Today .. Jackpot 4" Slash-Ups, 2-1-2 header, full size crossover, all ceramic ;)
Title: Re: What did you do to or on your CVO today?
Post by: CircleRacer on June 01, 2015, 09:05:15 PM
Installed Fullsac Stainless coated DX pipe 2.25 muffler cores and installed TTS master tune with Fullsac down load. I may not be able to get the darn radio to take a down load but I was able to down load the TTS master tune and Fullsac down load with no problems at all.
Title: Re: What did you do to or on your CVO today?
Post by: Spider51 on June 03, 2015, 12:15:35 AM
Spent the last two days cleaning the beast. Just got back from a 12 day Southwest trip with the wife and my buddy and his wife. The first 8 days we found out that the heated gear and the rain gear definately work. Crossed something off my bucket list that I didn't even know was there...climbing out of Austin, Nevada in the snow pulling a trailer. NOT fun!! I am now down to a toothbrush cleaning all the nooks and crany's. Sorry no pictures...too busy hanging on.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on June 03, 2015, 06:17:29 AM
Who makes this? Looking for the same place you installed it, the sides of the tank.  This thread has already cost me some $, why not more! lol
http://www.motorcycle-armor.com/

They've got pix on their site of the different products they offer and where it goes.
Title: Re: What did you do to or on your CVO today?
Post by: BladeRun on June 03, 2015, 08:08:58 PM
http://www.motorcycle-armor.com/

They've got pix on their site of the different products they offer and where it goes.

Thanks, just ordered a set.  :bananarock:
Title: Re: What did you do to or on your CVO today?
Post by: HUBBARD on June 04, 2015, 10:59:47 AM
Finally found one!  Kustom Kaddy.  8) Later--HUBBARD
Title: Re: What did you do to or on your CVO today?
Post by: backroad Mike on June 04, 2015, 11:21:27 AM
Replaced the "C" lifters after 27k miles.  The front intake cylinder lifter roller was starting to seize up.  It started while on a ride. Just happened to be cruising 25-35 mph in a small town with stereo off when the ticking started.  Had a buddy get my truck and drive the 70 miles and pick us up.  Lifter did not grenade, roller wheel showed no wear patterns, neither did the cam lobes.  Could roll the lifter with thumb and it would lock up, then release, then repeat. Replaced them all with Comp Cams 850-1 hydraulic lifters.   :cucumber:

Good thing it happened now.  Have a week long trip planned for the week after next.
Title: Re: What did you do to or on your CVO today?
Post by: CircleRacer on June 04, 2015, 11:40:32 AM
BackroadMike You are the first person that I have read about using Comp. Cams lifters. Do you know if Comp. Cams make their own lifters or buy from someone else? Comp. Cams has very good solid roller lifters for small block Chevrolets!!
Title: Re: What did you do to or on your CVO today?
Post by: HUBBARD on June 04, 2015, 12:03:40 PM
Replaced the "C" lifters after 27k miles.  The front intake cylinder lifter roller was starting to seize up.  It started while on a ride. Just happened to be cruising 25-35 mph in a small town with stereo off when the ticking started.  Had a buddy get my truck and drive the 70 miles and pick us up.  Lifter did not grenade, roller wheel showed no wear patterns, neither did the cam lobes.  Could roll the lifter with thumb and it would lock up, then release, then repeat. Replaced them all with Comp Cams 850-1 hydraulic lifters.   :cucumber:

Good thing it happened now.  Have a week long trip planned for the week after next.

You're a lucky man!  I trashed a 120 Motor one time due to a lifter taking a crap at 22K miles.  8) Later--HUBBARD 
Title: Re: What did you do to or on your CVO today?
Post by: backroad Mike on June 04, 2015, 01:51:23 PM
BackroadMike You are the first person that I have read about using Comp. Cams lifters. Do you know if Comp. Cams make their own lifters or buy from someone else? Comp. Cams has very good solid roller lifters for small block Chevrolets!!

I'm not sure, but have received many recommendations on the use of them from some reputable builders. These are the exact same lifters as used in the chevy small block 305/350/LS1 engines.  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: sdmikeob on June 04, 2015, 01:54:28 PM
yesterday i drove my cvo for 1hr or so then came back to work then i shut if let her rest for 10 mins and then i drove it for another 40 mins after and parked her and when i went to start it up battery seemed dead cause i just made clicking noise so i had aaa jump start it and rode it home for couple miles then shut it off and it did the same thing i just wondering if there is anyone with same issues maybe charging system not working of battery is just not holding charge..thanks
Title: Re: What did you do to or on your CVO today?
Post by: jachd17 on June 04, 2015, 06:00:40 PM
yesterday i drove my cvo for 1hr or so then came back to work then i shut if let her rest for 10 mins and then i drove it for another 40 mins after and parked her and when i went to start it up battery seemed dead cause i just made clicking noise so i had aaa jump start it and rode it home for couple miles then shut it off and it did the same thing i just wondering if there is anyone with same issues maybe charging system not working of battery is just not holding charge..thanks

 Did you look at the gauge to see if it was charging after you jump started it? It appears you have a bagger and it should have a gauge. If it was then battery. If not then regulator or stator.
Title: Re: What did you do to or on your CVO today?
Post by: Jock on June 07, 2015, 05:30:27 AM
Gettin' the scooter ready for Ouray!

 :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: kiro on June 07, 2015, 06:39:28 AM
Finally got around to installing a docking kit to get the tour pac off my SEUC. I'll post some images about the process later.
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on June 07, 2015, 09:21:56 AM
Not this morning yet, but yesterday.  Just rode them both, then cleaned them up a little.  Road King went about 250 making a breakfast run.  Road Glide went about 300 on a dinner run.  They were hungry.
Title: Re: What did you do to or on your CVO today?
Post by: JCZ on June 07, 2015, 09:47:25 AM
Finally got around to installing a docking kit to get the tour pac off my SEUC. I'll post some images about the process later.

Lookin forward to seeing these pics.
Title: Re: What did you do to or on your CVO today?
Post by: PeterJ on June 10, 2015, 02:47:30 PM
I lifted the cover on the Bike and gave it a little polish. Its off theroad right now waiting for a new Voltage regulator. The present one (replaced in the recall in November 2012) is pumping out 16 volts of charge then switches off causing battery drain. Hopefully new reg will arrive before the weekend. So I took out my Buell XB12SCG for a blatt around the Sussex roads instead.
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on June 10, 2015, 11:21:53 PM
Took my first quick ride on my new 124 after the tune. I am very excited about the performance! I really didn't think it was going to be much different than the 120r I blew up a couple of months ago but In was very fired up about how it felt. Soon as i took off and twisted the throttle a bit, I left a black patch about 20 feet long! Tune came out great with 140HP in 96 degree weather. Another amazing job by Bob in Hayward!
Title: Re: What did you do to or on your CVO today?
Post by: MrSurly on June 10, 2015, 11:35:38 PM
Congrats!
That sounds like s blast to ride!!
Are you still running a belt drive?
Did you have to replace or mod the trans for the new motor?


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on June 11, 2015, 12:25:53 AM
Yes, running a belt drive and stock tranny. Ran both with my 120r with no issues. When I blew up the motor, the tech took the trans apart expecting to have to replace some "stuff" since I told him that since we had everything torn apart while we were waiting for the new motor, I wanted to make everything as bullet proof as possible so I didn't have any issues going forward. He told me he was amazed by how good of shape the trans was. He actually went out and bought a Hayden for his own bike since I was running one thinking maybe that was why it looked so good.
Just happy to be back in the wind! Was not fun being "benched" for a couple of months! I did do around 700 miles over the Memorial day weekend but they were break in miles and this time I decided to follow S&S's recommendation which absolutely drove me nuts. Cant wait to "go play" this weekend now that its all ready to go. Today was a big tease!
Title: Re: What did you do to or on your CVO today?
Post by: OBB on June 11, 2015, 06:35:20 AM
Put it up on the jack for a once over to check tires and everything I could think of. Heading to TX Hill Country tomorrow morning  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: East Coast on June 11, 2015, 09:33:14 PM
Took my first quick ride on my new 124 after the tune. I am very excited about the performance! I really didn't think it was going to be much different than the 120r I blew up a couple of months ago but In was very fired up about how it felt. Soon as i took off and twisted the throttle a bit, I left a black patch about 20 feet long! Tune came out great with 140HP in 96 degree weather. Another amazing job by Bob in Hayward!

Wow, nice numbers! Enjoy that ride!   :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: OBB on June 11, 2015, 09:45:53 PM
Mean Mug bezel for the '15+ models. Yup, I had it color matched  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Supershooter on June 11, 2015, 10:18:03 PM
Was lucky enough to get to ride it for a work trip the last few days. 400 miles of awesome weather and roads, 170 miles of rain and wind for the ride home today, not to mention a fithy bike.
Supershooter
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on June 12, 2015, 01:28:13 PM



Changed the stock headlight and turn signals to LED's, also added LRS 12" dark windshield (might be going to LRS 13" soon). Have other mods in progress at the moment. So many add on's so little time.

Title: Re: What did you do to or on your CVO today?
Post by: Chains on June 12, 2015, 01:30:48 PM
Replaced Cruise Control switch not a very exciting thing but sure missed it. Going to change tran fluid today too.   :apple:
Title: Re: What did you do to or on your CVO today?
Post by: CircleRacer on June 14, 2015, 11:47:29 PM
I did not like the Legend air pump under the engine so I made brackets and moved it under the tour pack on a 2015 Limited CVO.
Title: Re: What did you do to or on your CVO today?
Post by: CircleRacer on June 14, 2015, 11:48:59 PM
Another left side view
Title: Re: What did you do to or on your CVO today?
Post by: CircleRacer on June 14, 2015, 11:51:56 PM
I also Installed the air gauge in the left lower fairing top. I installed a offset spacer to view it easier.
Title: Re: What did you do to or on your CVO today?
Post by: CircleRacer on June 14, 2015, 11:54:53 PM
Another view
Title: Re: What did you do to or on your CVO today?
Post by: wachuko on June 16, 2015, 10:49:50 AM
Finally got around to installing a helmet lock.  I had one from the wife's Softail Deluxe that we traded in... it was chrome, but nothing a good black spray can can't fix... left a few bits chromed to give it a contrast finish, hehehehe

(http://i151.photobucket.com/albums/s144/wachuko/Motorcycles/RK%20CVO/1bf94c16-b418-436b-894f-5d0ef641a5ab_zpszyme9bub.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: dayne66 on June 16, 2015, 11:24:55 AM
Changed fluids....put TP on to run errands.
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on June 16, 2015, 06:46:37 PM
  got a speeding ticket   :nixweiss: got a break tho.... officer knocked 25 mph off off the lower speed he clocked me at, cause i HAD a good driving record         :oops:
Title: Re: What did you do to or on your CVO today?
Post by: Para Bellum on June 16, 2015, 08:24:19 PM
That was a break; around here, 25 over = reckless driving and an impound.   :o
Title: Re: What did you do to or on your CVO today?
Post by: OBB on June 16, 2015, 09:35:35 PM
Rode it through The Three Sisters in Hill country, TX. Great scenery and riding. The sporadic downpours made it interesting at times.
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on June 16, 2015, 10:08:01 PM
That was a break; around here, 25 over = reckless driving and an impound.   :o
he had me at 37 over and it was going up when i finally seen him. i know not smart  ???
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on June 17, 2015, 08:49:41 PM
Mines at dealer, having a complete service, new shoes front and rear in preparation for my Ride to CA, up the coast to OR and on up the coast to WA and then back to east TN.  16 day trip.  Planning on doing the Iron Butt 1000 in 24, and the Saddle Sore 1500 in 36 on the way home.

Pick the bike up the 24th and depart the morning of the 25th.  :coolblue:
Title: Re: What did you do to or on your CVO today?
Post by: Ridgerunr on June 18, 2015, 08:10:52 AM
Have a safe trip Dave. Joe going with you?
Title: Re: What did you do to or on your CVO today?
Post by: cambo on June 18, 2015, 11:28:20 AM
Mines at dealer, having a complete service, new shoes front and rear in preparation for my Ride to CA, up the coast to OR and on up the coast to WA and then back to east TN.  16 day trip.  Planning on doing the Iron Butt 1000 in 24, and the Saddle Sore 1500 in 36 on the way home.

Pick the bike up the 24th and depart the morning of the 25th.  :coolblue:

Been trying to talk any of my riding buddies into doing a ride like what you are planning. So far no takers... All I get is 'the job is a hassle and the kids have the flu..." If I was in your neighborhood I would have asked you if I could tag along.

Ride safe and take some pictures to share with the rest of us.

Cam
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on June 18, 2015, 08:58:13 PM
Have a safe trip Dave. Joe going with you?

Not on this one. 

I will be meeting him in Red Lodge MT, after Sturgis.  He will be headed home from his trip, and I want to Ride Beartooth again after Sturgis.  So then we will do that and the ride home together.

We will be doing Bikes Blues and BBQ together this fall also.
Title: Re: What did you do to or on your CVO today?
Post by: kiro on June 20, 2015, 10:42:04 AM
Thanks to a head’s up & recommendation from doublerunner, I dropped my bike off yesterday to Infocus Mobile Audio in New Hampshire. Going to implement a significant audio upgrade – speakers, amp and head unit, and most importantly, get the amp fairing mounted. Spent a good deal of time speaking/planning with Justin O'Neil, the Owner of this business, and learned he also does electrical work when he has time. I’m going to have him construct a quick disconnect wiring harness, the final step to complete the tour-pak detach system. Will also have him install LED strips at the rear fillers to provide more visibility around the brake light when the tour-pak is dismounted. I planned to do this myself over the winter, but decided not to wait. Will post some images when I get the bike back next week.
Title: Re: What did you do to or on your CVO today?
Post by: Mount'nman on June 20, 2015, 04:09:04 PM
Rode up to local dealer to see if they were cooking hamburgers... no luck but had food truck there... $11.00 burrritos ... NO takers
Title: Re: What did you do to or on your CVO today?
Post by: Chains on June 20, 2015, 08:01:19 PM
Installed the George Anderson Tour Pack relocater I bought from CVO George.  Piece of cake on the 09 compared to the 06.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on June 20, 2015, 09:56:08 PM
Still traveling home from the Road Glide GTG in Kerrville. 1300 miles in two days gives us a lazy 300 mile day tomorrow. I did have 3 friends jump on the '15 FLTRUSE bandwagon within the last 3 days. One of them may show up at New River Gorge next month.
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on June 20, 2015, 10:20:34 PM
Thanks to a head’s up & recommendation from doublerunner, I dropped my bike off yesterday to Infocus Mobile Audio in New Hampshire. Going to implement a significant audio upgrade – speakers, amp and head unit, and most importantly, get the amp fairing mounted. Spent a good deal of time speaking/planning with Justin O'Neil, the Owner of this business, and learned he also does electrical work when he has time. I’m going to have him construct a quick disconnect wiring harness, the final step to complete the tour-pak detach system. Will also have him install LED strips at the rear fillers to provide more visibility around the brake light when the tour-pak is dismounted. I planned to do this myself over the winter, but decided not to wait. Will post some images when I get the bike back next week.
Sounds awesome, good luck and make sure you post up when complete.
Title: Re: What did you do to or on your CVO today?
Post by: RGlideKid on June 27, 2015, 08:38:24 PM
I put over a 100 miles on mine in some of the prettiest weather yet this summer.  The tunes were good and the skies blue!
Title: Re: What did you do to or on your CVO today?
Post by: Road Dad on June 27, 2015, 09:00:34 PM
Light rain here today so now the bike is dirty. Start to hate the blue color. I think I will look into a custom paint job this winter. I suck at painting so I will have to find a good painter.
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on June 28, 2015, 12:03:57 AM
Rode 200 miles today, great day cool temps, started raining late in the day so it did not ruin the best riding day of the year for me. Also stopped at a local dealer and bought the Custom Dynamics LED turn signals. Had the basic yellow LED lights and changed them to the Dynamic Rings. Love having two more white driving lights that change yellow when I signal for a turn.
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on July 04, 2015, 09:37:54 PM
Started looking for a rear tire replacement, will need one in the next few weeks.
Only 5,000 miles on that tire, maybe I should ease up on the throttle.
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on July 04, 2015, 11:31:12 PM
Started looking for a rear tire replacement, will need one in the next few weeks.
Only 5,000 miles on that tire, maybe I should ease up on the throttle.
Nah..
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on July 05, 2015, 12:50:09 AM
^ what he said ^  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on July 05, 2015, 08:55:13 AM
^ what he said ^  :2vrolijk_21:
Yeah, I don't see that changing either.
Title: Re: What did you do to or on your CVO today?
Post by: cambo on July 05, 2015, 09:50:53 AM
Started looking for a rear tire replacement, will need one in the next few weeks.
Only 5,000 miles on that tire, maybe I should ease up on the throttle.
I have 7000 miles on my original tires and still don't need to swap them out. I think I'm doing something wrong! Need to adjust my attitude.
Title: Re: What did you do to or on your CVO today?
Post by: Buckeye Rider on July 05, 2015, 04:39:51 PM
Installed a Fullsac DX pipe, 2.0 cores, screens and tried installing the new tune up. Finally figured out the tune was for an air cooled engine and wouldn't load. Gonna have to get new tune on Monday. Can't wait to try it out
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on July 05, 2015, 05:31:14 PM
I have 7000 miles on my original tires and still don't need to swap them out. I think I'm doing something wrong! Need to adjust my attitude.
Never got 5000 miles out of a rear tire, or 40 MPG on any bike I have ever had. IMHO nothing wrong with that.
Title: Re: What did you do to or on your CVO today?
Post by: Jock on July 05, 2015, 08:00:12 PM
Cleaned it finally after Ouray!

 :'(
Title: Re: What did you do to or on your CVO today?
Post by: DesertHOG on July 05, 2015, 11:21:27 PM
Cleaned it finally after Ouray!

 :'(
Did you give it the "Full Greg" treatment?

Title: Re: What did you do to or on your CVO today?
Post by: Supershooter on July 05, 2015, 11:50:48 PM
Rode through Moab, Mexican Hat, and Capitol Reef NP, day 3 of 10 or 11, can't wait till tomorrow Bryce and maybe Zion NP.
Supershooter
Title: Re: What did you do to or on your CVO today?
Post by: JCZ on July 06, 2015, 09:37:43 AM
Rode through Moab, Mexican Hat, and Capitol Reef NP, day 3 of 10 or 11, can't wait till tomorrow Bryce and maybe Zion NP.
Supershooter

Looking forward to your ride report.  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: kiro on July 06, 2015, 12:30:58 PM
Dropped it off in New Hampsire to have a Baker reverse gear installed.
Title: Re: What did you do to or on your CVO today?
Post by: dooinit2u on July 06, 2015, 06:05:37 PM
Did you give it the "Full Greg" treatment?

Did Greg graduate to the level of cleanliness standard set by Judy...?
Title: Re: What did you do to or on your CVO today?
Post by: Jock on July 06, 2015, 07:45:26 PM
Did you give it the "Full Greg" treatment?

Now that is a standard I will never be able to measure up to!

 :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Jock on July 06, 2015, 07:47:52 PM
Did Greg graduate to the level of cleanliness standard set by Judy...?

Now I have never seen Judy totally detail her bike but I bet it is top shelf.  I have visualized part of Greg's process and all I can say is WOW!

Either way - All Good!
Title: Re: What did you do to or on your CVO today?
Post by: skullplant on July 06, 2015, 07:49:20 PM
Installed new Edge Cut hand levers!
Title: Re: What did you do to or on your CVO today?
Post by: Chains on July 06, 2015, 08:37:15 PM
Gave the bike a bath.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on July 06, 2015, 09:36:11 PM
Installed my EZ-Brake lever and took a quick trip around the block. Gonna take a few blocks to get used to it but I'm liking it already. :2vrolijk_21:


 Now if only that damn clevis pin went in from the back side so the cotter pin was in the front. Another dumb MoCo design.... ::)
Title: Re: What did you do to or on your CVO today?
Post by: Chains on July 07, 2015, 04:08:59 PM
I have been waiting for a 17mm ball mount to come in to mount my GPS in a place lot of you may not like but I think I will.
After it cures I need to pull the fairing to wire in the charging system, piece of cake.  but I will need notch the dash for the wires to get to the cradle.  Hate to but with 12 inch Monkey bars I really didn't want my GPS out in the wind.  cant hurt the windshield it is 6 years old and has a small fracture near center mount.

Here's the ball mount. 
Title: Re: What did you do to or on your CVO today?
Post by: Chains on July 07, 2015, 04:09:50 PM
Here it is with cradle attached.

Title: Re: What did you do to or on your CVO today?
Post by: Chains on July 07, 2015, 04:16:18 PM
Side view
Title: Re: What did you do to or on your CVO today?
Post by: FXD_TG on July 07, 2015, 07:54:16 PM
Just returned from an 1800 mile, 9-day round trip through Orlando to Key West and back via St. Augustine over the 4th. 

https://ridingtwoup.wordpress.com/2015/06/29/road-trip-atl-to-key-west-back-part-i-orlando/
https://ridingtwoup.wordpress.com/2015/07/05/road-trip-atl-to-key-west-back-part-ii-key-west/
https://ridingtwoup.wordpress.com/2015/07/05/road-trip-atl-to-key-west-back-part-iii-the-trip-home/

Title: Re: What did you do to or on your CVO today?
Post by: kiro on July 07, 2015, 08:03:07 PM
Nice write up! It can sure get warm in the Keys...
Title: Re: What did you do to or on your CVO today?
Post by: Chains on July 08, 2015, 12:22:13 PM
Waiting on guy to get my trailer painted so I needed a small project to keep from going crazy.  Tired of the HD remote opener for the garage disconnecting and I really don't want to give up the options on my wall mounted remote. 

Had a brand new odometer switch in my tool box so I got out the remote, wired the switch to a couple of male plugs and the remote to the females and here you go cheap and easy.  Not wanting to pop a hole in my fairing I opted to mount it in my RH lower fairing door.  Easy to get to if battery goes dead and easy to reach. 
Title: Re: What did you do to or on your CVO today?
Post by: Chains on July 08, 2015, 12:23:06 PM
Remote.  added a dab of silicone after soldering the connections.
Title: Re: What did you do to or on your CVO today?
Post by: Chains on July 08, 2015, 12:24:50 PM
location.  left plenty of wire just in case I decide to move it. wrapped in clear tape and put Velcro on back to keep from bouncing around.

Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on July 08, 2015, 01:34:45 PM
Jim.....U sew smaat....... ;D

great idea, btw
Title: Re: What did you do to or on your CVO today?
Post by: Chains on July 08, 2015, 03:48:22 PM
Thanks Haird, it makes it a lot easier plus I didn't end up with a $3.00 doorbell on the wall controlling my door.
Title: Re: What did you do to or on your CVO today?
Post by: RGlideKid on July 10, 2015, 10:27:17 PM
I had a great day with my bike!  I finished the install of my new Bushtec trailer hitch and harness and it all checked out perfectly in spite of the lack of help from Bushtec!  Then I went out and completed the install/assembly of my new Race Deck garage flooring for my Harley bay in my shop!  Pictures and review will follow!!!

 :orange: :mango: :bananarock: :apple: :jalapeno: :pineapple: :pepper:
Title: Re: What did you do to or on your CVO today?
Post by: covgrt on July 11, 2015, 10:39:30 PM
Rode a poker run

Sent from my SM-G920V using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: wrayzor on July 12, 2015, 11:02:20 PM
Gave it a very good detail and then rode to Mt Charleston (just outside Las Vegas) for some cooler weather and a bite to eat.
(http://i58.tinypic.com/verd51.jpg)
(http://i59.tinypic.com/20fddsi.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: RGlideKid on July 12, 2015, 11:52:32 PM
We headed over to Mountain Home via Bull Shoals.  The roads are awesome that way, twisty with nice elevation changes and mostly in good shape for rural Arkansas.  The picture below was taken at the Visitors Center which overlooks the Bull Shoals dam, which is the 5th largest concrete dam in the U.S.
It was well over 100 degrees here today with the heat index, so we waited until late afternoon to head out.  It was a beautiful ride, and put a smile on both our faces.  So good to be out again enjoying each others company on the bike we have both fallen in love with already.   :-*
Title: Re: What did you do to or on your CVO today?
Post by: wrayzor on July 13, 2015, 08:20:16 PM
We headed over to Mountain Home via Bull Shoals.  The roads are awesome that way, twisty with nice elevation changes and mostly in good shape for rural Arkansas.  The picture below was taken at the Visitors Center which overlooks the Bull Shoals dam, which is the 5th largest concrete dam in the U.S.
It was well over 100 degrees here today with the heat index, so we waited until late afternoon to head out.  It was a beautiful ride, and put a smile on both our faces.  So good to be out again enjoying each others company on the bike we have both fallen in love with already.   :-*

I just got from visiting the in-laws in Cotter AR. I was thinking how nice it would be to ride a bike on all those nice winding roads.
Title: Re: What did you do to or on your CVO today?
Post by: RGlideKid on July 14, 2015, 12:10:20 AM
I just got from visiting the in-laws in Cotter AR. I was thinking how nice it would be to ride a bike on all those nice winding roads.

It would've been cool to ride together, bro!  You were a long way from home!  Cotter is a really cool little town.  Kinda romantic and fun to drive thru.  Hope you had a good visit!
Title: Re: What did you do to or on your CVO today?
Post by: Ridgerunr on July 14, 2015, 08:02:49 AM
Rode the Blue Ridge Parkway with some friends, stayed in Little Switzerland overnight. Had a blast.
Title: Re: What did you do to or on your CVO today?
Post by: DCFIREMANN on July 14, 2015, 08:22:18 PM
To tell you the truth, I didn't even think about my CVO today!!!!! Now tomorrow could be a little different!!!!

Be Safe

THE DAWG
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on July 17, 2015, 09:49:16 PM
A couple days ago, got home from a 6881 mile 15 day trip to the west coast,  Rode the 101 from Arcata CA up to and around the Olympic Pensilua, and MT Rainer.  When I got home took the bike in for its 20K service.  Flew out to rig to work for 21 days, as soon as I'm off going to Ride it out to Sturgis.
Title: Re: What did you do to or on your CVO today?
Post by: catahoula58 on July 18, 2015, 08:00:01 AM
Just got my 2009 FLTRSE3 upgraded to GMR's 113 kit by Steve! WOW! What a change for this bike, the DYNO Chart shows the results and I have to say that this bike rides so much better than before and is so much quieter, but does bark when you pull the throttle.  The GMR 113 Kit is "FUN" all in one package!
Title: Re: What did you do to or on your CVO today?
Post by: ranprk on July 18, 2015, 01:37:19 PM
Installed Fullsac Stage1, 2" cores, DX pipe and steve's custom tts dyno map for my 15 CVO Limited. what can I say, major improvement, less exhaust temp, good sound, better fuel economy. just all around better 110!
Title: Re: What did you do to or on your CVO today?
Post by: kiro on July 18, 2015, 01:47:03 PM
The bad news was we experienced a rainy and overcast morning so I didn't ride - it's supposed to clear later. The good news was the mailman delivering the title to my CVO today - paid off with Eaglemark in 27-months...
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on July 18, 2015, 08:00:11 PM
The bad news was we experienced a rainy and overcast morning so I didn't ride - it's supposed to clear later. The good news was the mailman delivering the title to my CVO today - paid off with Eaglemark in 27-months...
Congratulations!! That is always a good feeling.
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on July 18, 2015, 08:08:36 PM
Not today but yesterday and today.  Yesterday the old Road Glide swallowed two tanks of gas on a gorgeous day to be out riding.  Ended up surprising a 93 year old aunt for lunch.  Today the not quite as old Road King got through almost two tanks of its own during a day that was enough warmer than yesterday that I sweat through my shorts.

But it was still a good day for a ride.
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on July 19, 2015, 08:56:51 AM
The bad news was we experienced a rainy and overcast morning so I didn't ride - it's supposed to clear later. The good news was the mailman delivering the title to my CVO today - paid off with Eaglemark in 27-months...
Congrats on paying off your ride.
Title: Re: What did you do to or on your CVO today?
Post by: ONE2BAJA on July 19, 2015, 10:38:41 AM
Ran it about 10 times on a 1/8 mile drag stripe!  What a rush!
Title: Re: What did you do to or on your CVO today?
Post by: 2k on July 19, 2015, 11:54:35 AM
Rode to the top of Pikes Peak. 73deg at the base, 34 at the Summit. Dealer T & light rain jacket.....froze my bejebbies off
Title: Re: What did you do to or on your CVO today?
Post by: 2k on July 19, 2015, 11:56:04 AM
Right here
Title: Re: What did you do to or on your CVO today?
Post by: Bav on July 19, 2015, 12:13:37 PM
Installed Fullsac 2.0" Power Cores. Man does she sound great now. Just the sound I've been looking for. Now I know why you lot are fans of Fullsac!!

Took her out for a ride with my girlfriend on her new Street Bob. It's her first Harley and her first ride out with me on it. She hasn't ridden for 18 months and she loved every minute as did I.

(http://images.tapatalk-cdn.com/15/07/19/d0ed48d115dcfcdf852f26555cb2e17c.jpg)

(http://images.tapatalk-cdn.com/15/07/19/63fb051bee189f98b46084e082c98421.jpg)


Sent from my iPad using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: JCZ on July 19, 2015, 04:05:17 PM
Rode to the top of Pikes Peak. 73deg at the base, 34 at the Summit. Dealer T & light rain jacket.....froze my bejebbies off

But you made it!  :2vrolijk_21:  I guess it's a good thing it's paved all the way up now.

When we had the Cripple Creek GTG is was a dirt road most of the way.  Many members said we were crazy for wanting to ride to the top.  But you already know there's more than a few crazies on this forum.   :P
Title: Re: What did you do to or on your CVO today?
Post by: JCZ on July 19, 2015, 04:24:40 PM
Installed Fullsac 2.0" Power Cores. Man does she sound great now. Just the sound I've been looking for. Now I know why you lot are fans of Fullsac!!

Took her out for a ride with my girlfriend on her new Street Bob. It's her first Harley and her first ride out with me on it. She hasn't ridden for 18 months and she loved every minute as did I.

(http://images.tapatalk-cdn.com/15/07/19/d0ed48d115dcfcdf852f26555cb2e17c.jpg)

(http://images.tapatalk-cdn.com/15/07/19/63fb051bee189f98b46084e082c98421.jpg)


Sent from my iPad using Tapatalk

Are you kidding me.....she rode you on the back?  :huepfenlol2: :huepfenlol2:

You have a good lookin bike there......but you tell her that I said her bike is cooler looking and congratulations on her first Harley!  :2vrolijk_21:

I was going to say she needs a set of saddle bags but then I realized she's got a couple on your bike.  :P
Title: What did you do to or on your CVO today?
Post by: MrSurly on July 19, 2015, 08:02:18 PM
I tore it down after a valve bent. Still trying to work out what happened. Not stock guides or other components.

(http://images.tapatalk-cdn.com/15/07/19/fe69b0bd48e5aa92796d08134e4cfa0c.jpg)
(http://images.tapatalk-cdn.com/15/07/19/c38270d524ed9e59cd57eb741debf636.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: Nicky Pass on July 19, 2015, 09:32:44 PM
Got it out for a little 25 mile ride.  I wish I could have one weekend with nice weather, a 16 month old that isn't sick, no summer get together obligations and no work.  Wait....not possible
Title: Re: What did you do to or on your CVO today?
Post by: OBB on July 19, 2015, 10:05:30 PM
I tore it down after a valve bent. Still trying to work out what happened. Not stock guides or other components.

(http://images.tapatalk-cdn.com/15/07/19/fe69b0bd48e5aa92796d08134e4cfa0c.jpg)
(http://images.tapatalk-cdn.com/15/07/19/c38270d524ed9e59cd57eb741debf636.jpg)

I don't think all the carbon is stock either. What the hell is causing that?
Title: Re: What did you do to or on your CVO today?
Post by: JCZ on July 20, 2015, 08:41:26 AM
Sat. I left Coronado with sun shining and in a t-shirt.  Rode to the dealership about ten miles away, for them to program my new key fob and to grab something to eat (San Diego HD has a barber shop, tattoo parlor, coffee house, mini store, a patch sewing shop and several very nice, very comfortable waiting areas......it is huge!).  I left the dealership about a half hour later and before I got back to the freeway I was in a downpour!  :o 

1 1/4" of rain in about four hours here in Coronado.  Unheard of here in the San Diego area and yes, it set a record all over the So Cal area.  It was very weird.....even though it was pouring, it was about 80F so being in a t-shirt was fine.
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on July 20, 2015, 09:10:45 AM
Rode to the top of Pikes Peak. 73deg at the base, 34 at the Summit. Dealer T & light rain jacket.....froze my bejebbies off

As long as you picked 'em up on the way back down....

That's on my bucket list....not freezing the bejebbies off (already dun dat a few times) but riding Pikes Peak..... :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on July 20, 2015, 09:23:51 AM
Rode to the top of Pikes Peak. 73deg at the base, 34 at the Summit. Dealer T & light rain jacket.....froze my bejebbies off
did pikes peak last year, we got out before the rain came, was advised to ride it the am cause the afternoon you never know what will happen up there. We couldn't see the west side of the mountain but to the east you could see forever.
Title: Re: What did you do to or on your CVO today?
Post by: Nicky Pass on July 20, 2015, 12:51:07 PM
Got the saddle bag recall done, it took about 3 minutes.
Title: Re: What did you do to or on your CVO today?
Post by: dayne66 on July 20, 2015, 12:56:16 PM
Wife and I rode our bikes to Gold River for lunch...about 475 km round trip....and bought some art at www.Clayworks.com ....and it will be delivered on Wednesday.
Title: Re: What did you do to or on your CVO today?
Post by: dayne66 on July 20, 2015, 01:04:18 PM
Someone please tun them right side up!

I turned a 1/4 turn...and it's 90' out the other way.
Title: Re: What did you do to or on your CVO today?
Post by: kiro on July 20, 2015, 01:26:59 PM
Corrected as requested... Image 1
Title: Re: What did you do to or on your CVO today?
Post by: kiro on July 20, 2015, 01:27:49 PM
Image 2.
Title: Re: What did you do to or on your CVO today?
Post by: Chains on July 21, 2015, 10:29:42 PM
Got it all cleaned up after the West Virginia GTG.   Noticed the rear brakes where not what they need to be in the  mountains pulling a trailer. Left my RH saddlebag off so I can replace the pads tomorrow after a trip to the dealer.

Removed all lights and other items from my tomato red Bushtec and took back to painter.  I will get paint mixed tomorrow since his color matching skills are weak at best. If it turns out bad this time I'll paint it flat black lol.

Title: Re: What did you do to or on your CVO today?
Post by: Road Dad on July 21, 2015, 11:11:28 PM
Rode 754 miles
Title: Re: What did you do to or on your CVO today?
Post by: Chains on July 22, 2015, 05:40:47 PM
Decided to change the bolts to knobs that I use to hold my saddlebags on with. Sure make it nice. On for the security of falling off not to guard against theifs.
Title: Re: What did you do to or on your CVO today?
Post by: East Coast on July 23, 2015, 08:21:27 AM
Chains,
By chance are those 5 1/6-18 thread? If so where did you purchase them? I couldn't find a set locally I tried Lowes and Home Depot. I did find them on Amazon but the shipping for four was almost the same price for the four so I used bolts instead.
Title: Re: What did you do to or on your CVO today?
Post by: TNCarters on July 23, 2015, 09:04:54 AM
Found some 5/16 locally at Lowes with the u-nuts but the knob thread is 1.75" long.  It fits but may take a little length off of it eventually.  Have not checked Ace Hardware, they usually have a better selection of chrome and SS than the big box stores.
Title: Re: What did you do to or on your CVO today?
Post by: Chains on July 23, 2015, 09:15:05 AM
Chains,
By chance are those 5 1/6-18 thread? If so where did you purchase them? I couldn't find a set locally I tried Lowes and Home Depot. I did find them on Amazon but the shipping for four was almost the same price for the four so I used bolts instead.

 Yes 5/16-18. Bought them at my local Lowes. Had to hacksaw 1/2 inch off as they come 1 3/4 long.
Title: Re: What did you do to or on your CVO today?
Post by: MrSurly on July 23, 2015, 11:47:38 AM
You wouldn't happen to have the Lowe's receipt handy with the item number, would you?
Title: Re: What did you do to or on your CVO today?
Post by: Road Dad on July 23, 2015, 01:54:35 PM
Took a ride through Chicago traffic and 87F. At least I was not cold.
Title: Re: What did you do to or on your CVO today?
Post by: TNCarters on July 23, 2015, 03:52:01 PM
MrSurly, Have both the u-nut and knob at home still in packaging so can get it to you this evening.
Title: Re: What did you do to or on your CVO today?
Post by: MrSurly on July 23, 2015, 05:37:50 PM
That would be great! Easy to check the local inventory and to make certain I get the right pieces.
Title: Re: What did you do to or on your CVO today?
Post by: TNCarters on July 23, 2015, 06:32:40 PM
U-nut part # 74282, $1.07 ea
Knob 5/16-18 x 1.75" part # 423473, $3.49 ea
http://www.lowes.com/ProductDisplay?partNumber=423473-37672-884516&langId=-1&storeId=10151&productId=3903340&catalogId=10051&cmRelshp=req&rel=nofollow&cId=PDIO1

Looks like they also carry a slightly shorter U-nut.  If your military, retired military or military civilian our Lowes gives a 10% discount at register with military ID.


Title: Re: What did you do to or on your CVO today?
Post by: TNCarters on July 23, 2015, 06:44:48 PM
Back to what we did today:
Ordered Fullsac 1.75" Power Cores with screens.  UPS notice said get them middle next week.  Called and got the 10% CVO discount, thanks Steve.
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on July 25, 2015, 04:57:31 PM



Attached new tour pack that Joe Z painted for us. Shop gave me a sweet deal on labor to add the wiring harness so I left the work to them.




 :bananarock:





Title: Re: What did you do to or on your CVO today?
Post by: dayne66 on July 25, 2015, 06:00:49 PM
Rode to Port Albernie for the first annual Tsunami rally.....about a hundred bikes and a few booths...it'll grow!
'Cause I've been doing so much yard work...and can only wash cars/bikes on Thursdays and Sundays...mine has been a little neglected and has more than a few bugs on it......so...I won the dirtiest bike prize...
http://www.riderz.ca/other-motobrush-motorcycle-cleaning-kit-detail.htm?productid=18601530
Title: Re: What did you do to or on your CVO today?
Post by: RGlideKid on July 25, 2015, 06:42:53 PM
Me and the wife just got back from a 370 mile overnighter to Little Rock and had the 1k service call performed.
HOT, HOT, HOT today.  They said the heat index was almost 118 degrees in the city.  Crazy. 
I was sure glad for the liquid cooling.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on July 25, 2015, 08:38:15 PM
Put close to 400 miles on it by riding over to the Flight 93 Memorial and back. Odometer hit 7k last week at the NRG GTG and 8k on the way home today.
Title: Re: What did you do to or on your CVO today?
Post by: Para Bellum on July 25, 2015, 11:08:44 PM
Got it ready for Sturgis.  Changed oil to AMSOIL 60 wt, put Ride-On goo in tires and aired them to max cold pressure, and installed new Lyndall Gold+ front brake pads.  Removed drawbar for Bushtec hitch since we have a chase vehicle for luggage.
Title: Re: What did you do to or on your CVO today?
Post by: jrod_141 on July 26, 2015, 03:48:37 PM
Ok, added a L2R derby cover, fairing pouch (last week), my HD Police 1 timer cover, tour pak rack brake light.  think that's it for now.  at least until i get back to the dealer.  I installed the wiring for the LED windshield trim, but when i finally pulled the trim out of the bubble wrap to install it, it was black instead of chrome... fail.  still have the HD scripted billet aluminum shift linkage to put on too...
Title: Re: What did you do to or on your CVO today?
Post by: FXD_TG on July 26, 2015, 05:47:50 PM
Talked with "THE tuner" at HD of ATL about doing some dyno work on Blue and possibly a cam change on top of the Fullsac X-pipe/2.0 baffles/TTS mapping as a way of knocking down the engine heat a few ticks.  Not to worried about additional HP/Torque beyond whatever's inherent in the well-tuned 110" SE motor... just bringing down the heat.

We decided that a phased approach is probably best: let him put it on the Dyno and see what he can do to sort it out.  Then, consider a larger volume head pipe and then perhaps cams.
Title: Re: What did you do to or on your CVO today?
Post by: wrayzor on July 26, 2015, 09:12:19 PM
Removed the factory clips on the bags and installed bolts with lock washers for added piece of mind.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on July 26, 2015, 09:28:36 PM
Talked with "THE tuner" at HD of ATL about doing some dyno work on Blue and possibly a cam change on top of the Fullsac X-pipe/2.0 baffles/TTS mapping as a way of knocking down the engine heat a few ticks.  Not to worried about additional HP/Torque beyond whatever's inherent in the well-tuned 110" SE motor... just bringing down the heat.

We decided that a phased approach is probably best: let him put it on the Dyno and see what he can do to lean it out. Then, consider a larger volume head pipe and then perhaps cams.

Pretty sure lean it out, is exactly the opposite of what you want.  They come from the Factory too lean.  Add the X-pipe and baffles it will be even leaner.  The tuner should use the TTS to richen up the mixture.  A richer mixture will run cooler than a leaner mixture.
Title: Re: What did you do to or on your CVO today?
Post by: FXD_TG on July 26, 2015, 10:23:44 PM
Pretty sure lean it out, is exactly the opposite of what you want.  They come from the Factory too lean.  Add the X-pipe and baffles it will be even leaner.  The tuner should use the TTS to richen up the mixture.  A richer mixture will run cooler than a leaner mixture.

Mental wires were crossed; it happens....  Yes, what you said. 
Title: Re: What did you do to or on your CVO today?
Post by: MrSurly on July 27, 2015, 12:08:52 AM
I took mine out for a ride today after a repairing a bent valve that happened a week ago. While I had it torn down I went ahead and had the cylinders bored .060 over, making it a 113" now.
I felt great to get out and get a few miles on. I could do without the 100* temps, tho.
Title: Re: What did you do to or on your CVO today?
Post by: michaelokielee@yahoo.com on July 27, 2015, 03:34:40 AM
Picked up my bike from Savannah Harley for the 10,000 mile service.   I asked them to sign my owners manual and they put 8,000 miles instead of the 10,121 that was on the odometer. Why would anyone get a 10k service with 8,000 miles? 
Title: Re: What did you do to or on your CVO today?
Post by: owl893 on July 28, 2015, 11:13:25 AM
I am a suspicious person, sometimes unfounded, but if this indicates that you already have 2,121 miles on your last service, I would make them change it and resign for it. 

OWL
Title: Re: What did you do to or on your CVO today?
Post by: kiro on July 28, 2015, 11:25:48 AM
Not exactly to my CVO, but for it. Set up an Audible account to stream audiobooks through my phone while riding. With the revisions to the audio system this works really well and provides an alternative to music only.
Title: Re: What did you do to or on your CVO today?
Post by: GregKhougaz on July 28, 2015, 12:26:09 PM
I am a suspicious person, sometimes unfounded, but if this indicates that you already have 2,121 miles on your last service, I would make them change it and resign for it. 

OWL

 :nervous:    Just because you're not paranoid doesn't mean they're not out to get you.     :nervous:
Title: Re: What did you do to or on your CVO today?
Post by: MrSurly on July 28, 2015, 12:35:14 PM
Picked up my bike from Savannah Harley for the 10,000 mile service.   I asked them to sign my owners manual and they put 8,000 miles instead of the 10,121 that was on the odometer. Why would anyone get a 10k service with 8,000 miles?

I don't know the 'why' except just an honest mistake, but I would absolutely go back and make them correct the record.
Title: Re: What did you do to or on your CVO today?
Post by: Chains on July 28, 2015, 02:49:01 PM
Just got done changing transmission fluid.  Good news it what came out looked great.  Went with Red Line 80W with shockproof.

Getting ready to go out and ride now.  92 degrees wish it would cool down.
Title: Re: What did you do to or on your CVO today?
Post by: Dr.D on July 28, 2015, 04:43:03 PM
Drove the Fatboy Sunday and was pleased to see that the new S&S lifters have indeed decreased the top end rattle. Damn that little bike is fast. 120tq
Title: Re: What did you do to or on your CVO today?
Post by: Chains on July 28, 2015, 04:48:42 PM
Just got done changing transmission fluid.  Good news it what came out looked great.  Went with Red Line 80W with shockproof.

Getting ready to go out and ride now.  92 degrees wish it would cool down.

Got in 50 miles, much smoother shifting, Harley clunk all but gone. Very pleased with short term results, will see long term.  Used Red Line 75 w 90 in previous bikes and was very happy.

No clue as to what was in it but knowing the history it was Done at a dealer and was a Harley product.
Title: Re: What did you do to or on your CVO today?
Post by: michaelokielee@yahoo.com on July 28, 2015, 07:19:16 PM
Quote
I am a suspicious person, sometimes unfounded, but if this indicates that you already have 2,121 miles on your last service, I would make them change it and resign for it.

I did right there on the spot, and it was also on my invoice, which I also had them change! :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on July 29, 2015, 06:17:45 PM
Had the 5,000 mile service completed and a new rear tire put on the bike.
Title: Re: What did you do to or on your CVO today?
Post by: DCFIREMANN on July 29, 2015, 08:41:26 PM
On the SE LIMITED I installed a new D&D Fat Kat exhaust, T-Man air cleaner, SEPRT then smart tuned the bike.

Be Safe

THE DAWG
Title: Re: What did you do to or on your CVO today?
Post by: MrSurly on July 30, 2015, 12:56:12 AM
Ride another hundred miles after work, doing break-in cycles and also PV auto tuning since I just over bored the jugs to 113.
It does feel stronger. Once I get the tune a little more dialed in it should really scream. 350mi so far


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Chains on July 30, 2015, 06:12:14 PM
Got it all cleaned up and ready to put the Motorcycle Armor on the saddlebags tonight. Leaving in the morning for North Carolina to pick up another Bushtec. Since I was down to one I was having cold sweats.  :huepfenlol2:
Title: Re: What did you do to or on your CVO today?
Post by: Rooster on July 30, 2015, 06:34:13 PM
Today was going to be deep clean day for my new acquisition. So as I stood looking at the bike I though they let's start under the seat its always dirty. I was right filthy cleaned right up.   Thinking what to clean next ( thinking is what got me in trouble) I opt to remove the battery and clean under it too. 

Now I have had this bike for all of 2 days, one spent riding it home plus being a guy why bother to see if the owners manual has any advice on this procedure. 

Why because when you unhook the battery the freak in siren and lights will wake the dead. OK now its time to get the book out and find the proper procedure for battery removal. Sure try to concentrate in the garage with all the racket. After about 10 minutes I figured it out. Cleaned under it and put it back in. 

Should have had it on video, many have won Americas Funniest.   I had to look like a rooster doing its dance around a hen  when the freak in alarm went off. So much for deep clean.

May need to post this in humor because now it seems funny but sure wasn't when it happened.  :huepfenlol2:
I like this, do you have video? :huepfenlol2:
Title: Re: What did you do to or on your CVO today?
Post by: Chains on July 30, 2015, 06:47:13 PM
Quote: I like this, do you have the video :huepfenlol2:



Wish I did I would watch it every time I thought that I didn't need to read the instructions.  Never had that issue with my 06. When its battery died in Pennsylvania on the way to Chappys funeral.  Never even gave a single thought to the alarm on the 09.  Will look before I leap from now on.
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on July 30, 2015, 10:14:57 PM
Went to Lowes and bought two 5/16 u nuts and two 5/16 threaded knobs. Took the recalled junk off of the front saddlebag mounts and replaced with the u nuts/knobs.
Title: Re: What did you do to or on your CVO today?
Post by: Chains on July 30, 2015, 11:05:25 PM
Went to Lowes and bought two 5/16 u nuts and two 5/16 threaded knobs. Took the recalled junk off of the front saddlebag mounts and replaced with the u nuts/knobs.

Best thing you could do Mike.  I never worry about my bags falling off. I know this is the first recall from Harley but as I think back my 1995 Road King quarter turn pins used to flare out and not catch after a few times of taking the bags off. Back then I used to squeeze them back with vice grips and go on.  Tells me they have had issues forever. Bad design to have been in production so long.
Title: Re: What did you do to or on your CVO today?
Post by: MrSurly on July 30, 2015, 11:45:01 PM
Broke it again.
(sigh...)


Sent from my iPad using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on July 31, 2015, 08:53:24 AM
Today.....head em up and move em out. Sturgis or bust.
Title: Re: What did you do to or on your CVO today?
Post by: longlast on July 31, 2015, 10:32:47 AM
Today.....head em up and move em out. Sturgis or bust.

Would love to be tagging along :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: longlast on July 31, 2015, 10:37:19 AM
Added a old N.W.T. plate. Covering up the mount for were the stock plate would be.
Title: Re: What did you do to or on your CVO today?
Post by: RGlideKid on July 31, 2015, 11:02:57 AM
Added a old N.W.T. plate. Covering up the mount for were the stock plate would be.

Interesting concept!!

I put a new 15" Freedom Shield on my scoot, but first I took a tap and die to those pesky bolts and stupid brass inserts in the fairing.  They work great now!
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on July 31, 2015, 05:12:12 PM
Best thing you do Mike.  I never worry about my bags falling off. I know this is the first recall from Harley but as I think back my 1995 Road King quarter turn pins used to flare out and not catch after a few times of taking the bags off. Back then I used to squeeze them back with vice grips and go on.  Tells me they have had issues forever. Bad design to have been in production so long.

Best thing about it Jim, took something like 9 bucks and 5 minutes to fix their problem. I don't know about everybody but I'll gladly put up with the minor hassle of removing the knob/bolt when I wash or work on the sickle compared to the possibility of a bag falling off going down the road. Every since I heard about the recall from OBB in Fayetteville I had visions of the bag falling off and landing in the path of whoever was behind me, most likely Susan, and causing additional mayhem and possibly a wreck.
Don't have to worry no more.
Title: Re: What did you do to or on your CVO today?
Post by: Road Dad on August 01, 2015, 08:17:48 AM
Put the Brukus bolt kit on my bags the day I brought it home. Bags only come of once a year in my case. (Fall when I wash and wax before the snow)
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on August 01, 2015, 06:59:53 PM
Took a little 220 mile jaunt through the hills of Soutern WV to visit the dealer I bought Orange Crush from to have the clutch recall done. While I was there I had the dealership replace the two remaining factory latch clips.

Mike Adkins has retired and sold the dealership to Eddie Kieffer who also owns several metric dealerships in the Logan area. The name is changing from Mike's to Moutain State Harley Davidson. Eddie took the time to introduce himself and we talked for quite a while. I noticed that they had two 2015 CVO Limiteds, one of which had a sign saying $5000 off and they are a MSRP dealer!! Needless to say Eddie is being very aggressive with pricing!!! They sold the silver/maroon one while I was there and have a gold/black left.

I mentioned the site to Eddie as well as the GTG's that we have. He asked me to bring you all by if we decide to do a WV GTG next year, which works well because I was thinking of moving the festivities farther South.

I also rode, for the first time, a new section of the King Coal Expressway that has been opened between Gilbert and Red Jacket. They used a surface mine to construct this 11 mile section along the top of a ridge. I nicknamed it the KingaCoala Skyway.
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on August 01, 2015, 09:47:36 PM





Nada, Dealership broke it while working on it and had to order parts to replace their mistake. Bummer, no riding this weekend or next week.  :(
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on August 01, 2015, 10:11:35 PM
That sucks.
Title: Re: What did you do to or on your CVO today?
Post by: TNCarters on August 02, 2015, 07:49:07 AM
Put the Fullsac screens and 1.75 baffles in my RGU mufflers.  That was a bit more effort than expected doing it with a dremel and the muffler packing was stuck to the inside of the muffler can.  Not too loud but a bit deeper.  Will be easier to try different baffles now.
Title: Re: What did you do to or on your CVO today?
Post by: CircleRacer on August 02, 2015, 08:19:51 AM
Put the Fullsac screens and 1.75 baffles in my RGU mufflers.  That was a bit more effort than expected doing it with a dremel and the muffler packing was stuck to the inside of the muffler can.  Not too loud but a bit deeper.  Will be easier to try different baffles now.

That sucks.


Sent from my XT1080 using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: kiro on August 02, 2015, 03:17:12 PM
I noticed the H-D hardware that came with my tour-pac detach kit was already rusted just a few weeks after installation. Pulled/replaced the fasteners with stainless steel cap head bolts. It was a nice idea but it doesn’t look too good when the torx heads show rust inside the chrome…
Title: Re: What did you do to or on your CVO today?
Post by: Chains on August 02, 2015, 03:36:42 PM
I noticed the H-D hardware that came with my tour-pac detach kit was already rusted just a few weeks after installation. Pulled/replaced the fasteners with stainless steel cap head bolts. It was a nice idea but it doesn’t look too good when the torx heads show rust inside the chrome…

I have used testers silver paint on a Q tip to fill in the areas on chrome screws to stop the rust before.  Worked for me.
Title: Re: What did you do to or on your CVO today?
Post by: kiro on August 02, 2015, 04:05:37 PM
Thanks Chains, that's an excellent tip. I still have the hardware and can re-install. 
Title: Re: What did you do to or on your CVO today?
Post by: Nicky Pass on August 02, 2015, 04:31:15 PM
I noticed the H-D hardware that came with my tour-pac detach kit was already rusted just a few weeks after installation. Pulled/replaced the fasteners with stainless steel cap head bolts. It was a nice idea but it doesn’t look too good when the torx heads show rust inside the chrome…

That would piss me off, but "that's normal, they all do that".
Title: Re: What did you do to or on your CVO today?
Post by: kiro on August 02, 2015, 04:38:59 PM
Haha - yep...
Title: Re: What did you do to or on your CVO today?
Post by: RGlideKid on August 02, 2015, 04:42:54 PM
Took a 400 mile trip to Eureka Springs and Fayetteville, AR over a two day weekend with our friends Streetglide1 (Bob and Janet).  Had excellent weather and a great time with new friends!
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on August 02, 2015, 08:39:22 PM
Took a 400 mile trip to Eureka Springs and Fayetteville, AR over a two day weekend with our friends Streetglide1 (Bob and Janet).  Had excellent weather and a great time with new friends!

That is a great weekend trip, just not enough time to take in all the great roads around there.
Title: Re: What did you do to or on your CVO today?
Post by: RGlideKid on August 02, 2015, 08:49:42 PM
That is a great weekend trip, just not enough time to take in all the great roads around there.

Tell me about it!  Pretty much everywhere I've ever been on a vacation - long or short - I wished I could have explored more!  But I got to show some new stuff to Bob and Janet and seeing it thru their eyes was fun.
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on August 03, 2015, 02:03:29 AM
Got to put 600 miles (Sat and Sun) on the new 124 and had a absolute blast! Couldn't be happier. Got to "play" with a sport bike yesterday up in the mountains and though he did "school me", when we both pulled into Julian which is a small town with only 1 gas station so we both stopped for gas he asked me what kind of motor I was running because he kept seeing me in his rear view mirror and couldn't believe it. I explained to him I was trying to put him in my rear view mirror and he was pissing me off that I couldn't do it but I still got a kick out of his question..
Title: Re: What did you do to or on your CVO today?
Post by: JCZ on August 03, 2015, 08:42:23 AM
Sounds like you're enjoying that new motor and past the break in stage, Alan.  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: MrSurly on August 03, 2015, 11:47:17 AM
I put a couple of hundred miles on this weekend, also breaking in a new set of rings. I had to do a repair of a bent valve and "while in there" opted to up it to a 113" with an overbore. Tuning with the PV autotune, responding very well, indeed.
Title: Re: What did you do to or on your CVO today?
Post by: knothead on August 03, 2015, 11:14:38 PM
Turned 60 k between here and Helena, Montana
Title: Re: What did you do to or on your CVO today?
Post by: longlast on August 09, 2015, 03:02:38 PM
Spent the morning trying out a new cleaner I found. Out come,... I like it

                       Don't know why the camera makes it look pink :confused5:,...it's red
Title: Re: What did you do to or on your CVO today?
Post by: kiro on August 09, 2015, 04:50:19 PM
Replaced my old style electric Mini-beast horn, had a broken mounting bracket, with the new style Mini-beast 1 air horn from Custom Dynamics. Supposedly this was a five minute project running the wire back to the battery – took me nearly two hours. The most difficult task was getting everything out of the way to pull the battery cover. The air horn is significantly louder than the electric version… Electric horn on left, air horn with compressor on right in the attached image.
Title: Re: What did you do to or on your CVO today?
Post by: geezerglide on August 09, 2015, 05:20:06 PM
Spent the last week putting on over 3,500 miles to Sturgis area and back to calgary.

While in Rapid City had Baker Driveline install their new Compensator, and the Baker F6R reverse gear in the geezerglide.

geezerglide
Title: Re: What did you do to or on your CVO today?
Post by: MrSurly on August 10, 2015, 11:09:21 AM
On Saturday I rode to visit an old friend and returned home. 780 miles and damn, it is hot in Texas. I'm still auto-tuning the new 113 build using the PV.

Title: Re: What did you do to or on your CVO today?
Post by: kiro on August 10, 2015, 12:37:27 PM
Quote
While in Rapid City had Baker Driveline install their new Compensator, and the Baker F6R reverse gear in the geezerglide.

Wow- that's pretty neat geezerglide... Sounds like you took advantage of your time in Sturgis. Let us know how you like the additions once you get some miles on.
Title: Re: What did you do to or on your CVO today?
Post by: Chains on August 11, 2015, 03:13:53 PM
Installed the Hog Tunes Tweeters that Ohio Dave sold me.  Really improved the radio sound.

Thanks Dave
Title: Re: What did you do to or on your CVO today?
Post by: dayne66 on August 11, 2015, 03:18:28 PM
Put the Beacon policy on the bike. That's the part that is for all year and covers the bike....and trailer and riding gear....$1092!

The Wife's $1200 Sporty is $220.
Title: Re: What did you do to or on your CVO today?
Post by: tonykaos on August 13, 2015, 04:39:07 PM
Nice ride to town sprinkles on the windshield good tunes playing, clouds building on the mountain pass, outer bands of the hurricane rolling in.


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on August 13, 2015, 08:37:06 PM






A fresh coat of RB Quick Detailer and some leather protectant and she's ready to roll early Saturday morning to the Sturgis MS Rally.  :bananarock:



Title: Re: What did you do to or on your CVO today?
Post by: OBB on August 13, 2015, 09:17:55 PM
Picked it up from the dealer and proceeded to put 170 miles on it after taking a 1/2 day off.  Been working so much lately I had them install the DX pipe and dyno tune it. Sounds a little deeper without the cat in it. Runs cooler it seems although this evening when I actually put my hand down by the engine it was already down to 71* outside so I didn't feel much heat at all.
Title: Re: What did you do to or on your CVO today?
Post by: RGlideKid on August 14, 2015, 10:26:28 AM
I put those stick-on bumpers on the bottoms of my saddlebags so I don't need to find a towel to set them on any more.  Much easier when you're traveling now to take them off and just set them down!
Many thanks to Greg Khougaz for the idea!!!!    :thumbsup:
Title: Re: What did you do to or on your CVO today?
Post by: OBB on August 14, 2015, 10:31:23 AM
I put those stick-on bumpers on the bottoms of my saddlebags so I don't need to find a towel to set them on any more.  Much easier when you're traveling now to take them off and just set them down!
Many thanks to Greg Khougaz for the idea!!!!   
I missed that thread...
Title: Re: What did you do to or on your CVO today?
Post by: kiro on August 14, 2015, 10:32:54 AM
Quote
I missed that thread...

I did as well Harry - can you please identify the bumpers and where they were obtained? Sounds like a great idea.
Title: Re: What did you do to or on your CVO today?
Post by: GregKhougaz on August 14, 2015, 11:40:18 AM
I did as well Harry - can you please identify the bumpers and where they were obtained? Sounds like a great idea.

Right here:

Two Free (almost) Modifications for Your Bags (http://www.cvoharley.com/smf/index.php?topic=101649.0)
Title: Re: What did you do to or on your CVO today?
Post by: Chains on August 14, 2015, 02:03:12 PM
Replaced my fork sliders with a set of Ness machined ones. Been sitting on a shelf in my garage for at least 6 years.
Title: Re: What did you do to or on your CVO today?
Post by: vikingolly69 on August 14, 2015, 04:33:31 PM
Got my bike started again. After 7 months travelling from Australia (dont ask) to Santa Fe NM, it needed a battery trickle - and ran fine!
Title: Re: What did you do to or on your CVO today?
Post by: FXD_TG on August 14, 2015, 05:17:33 PM
Dropped Blue off for a day on the Dyno at Harley-Davidson of Atlanta...

Dead stock except for the Fullsac X-pipe and 2" cores and after the tune was pulling 110.8 ft lbs of torque at 3k and 96.2 hp at 5.5k with a nice flat AFR in the ~12.8 to ~13.2 range.   

Just putting around the neighborhood after bringing her home, definitely a lot more grunt than it had before and no popping. 

They also re-calibrated the speedo which I discovered was reading about 9% higher than actual (showing 75 but traveling 70) during a recent trip where I fired up a GPS program with a calculated speed display.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on August 14, 2015, 08:35:27 PM
Right here:

Two Free (almost) Modifications for Your Bags (http://www.cvoharley.com/smf/index.php?topic=101649.0)
Thanks Greg
Title: Re: What did you do to or on your CVO today?
Post by: Chains on August 15, 2015, 02:15:03 PM
Bought a cool mug so when I decide what drink holder to get I am ready.
Title: Re: What did you do to or on your CVO today?
Post by: longlast on August 15, 2015, 02:31:29 PM
                             


                                             The gremlin bell wasn't doing it's job today

                                                         Did this to mine today >:(
Title: Re: What did you do to or on your CVO today?
Post by: dayne66 on August 15, 2015, 02:51:14 PM
Bought a cool mug so when I decide what drink holder to get I am ready.
Do you have a Harley # for that mug?
I wonder if it works as well keeping coffee hot as the contigo mugs from Costco.
I like the rubber bottom on it....in case I'd has to toss it between my legs in an emergency.
Looks like it would fit the bag guard leather drink holder too.

It looks different than the last Harley Davidson mug I had...when it had liquid in it the seal between the lid and the cup got too slippery to stay on reliably. But...I see this one is the Screamin' Eagle version....
Title: Re: What did you do to or on your CVO today?
Post by: Chains on August 15, 2015, 03:31:55 PM
Do you have a Harley # for that mug?
I wonder if it works as well keeping coffee hot as the contigo mugs from Costco.
I like the rubber bottom on it....in case I'd has to toss it between my legs in an emergency.
Looks like it would fit the bag guard leather drink holder too.

It looks different than the last Harley Davidson mug I had...when it had liquid in it the seal between the lid and the cup got too slippery to stay on reliably. But...I see this one is the Screamin' Eagle version....

Try this. Harley-Davidson Screamin' Eagle Diamond Plate Travel Mug, Silver HARLBV002300
Title: Re: What did you do to or on your CVO today?
Post by: Nicky Pass on August 15, 2015, 04:40:04 PM
                             


                                             The gremlin bell wasn't doing it's job today

                                                         Did this to mine today >:(

2 in one tire....geeeeeeze!
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on August 15, 2015, 06:47:48 PM
                             


                                             The gremlin bell wasn't doing it's job today

                                                         Did this to mine today >:(
The tire still held air so maybe the bell was working for ya'.


I ordered a set of new Michelin Comander II's for mine today. Maybe they won't  cup as quickly as the Dunlops......
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on August 15, 2015, 07:29:44 PM



Rode with friends in our HOG group to a bike rally in Sturgis MS. Hot, but good times.







Title: Re: What did you do to or on your CVO today?
Post by: ptnlinda on August 15, 2015, 11:48:28 PM
Fitted the EZ UP Center Stand today that I purchased 2nd hand off Ebay. Really easy to fit and works like a charm. Also fitted the Brukus Saddlebag bolts even though I'm about to get the replacement ones under the MOCO recall. Another really easy mod.
Title: Re: What did you do to or on your CVO today?
Post by: wrayzor on August 21, 2015, 12:41:07 AM
Installed Dakota Digital speedo and tach gauges. Pretty straight forward install, just hope I got the fuel range set up correctly.
(http://i57.tinypic.com/sey4a8.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: Kingspoke on August 21, 2015, 02:36:41 AM
I had the Ohlins FKC-101 fork cartridges installed on my Ultra, and I have to say it was money well spent!  Thanks to Brian at Fuelmoto for the fast service! :2vrolijk_21:

I had put the Ohlins 159 shocks in back initially, and it really revealed the inadequate stock, front suspension.  Now that I finally installed the cartridges the bike not only brakes more stable, without diving, handles high speed turns much more stable, and actually provides a smoother ride! :apple:

I'll be enjoying the ride a lot more with a lot less stress on my back! :orange:
Title: Re: What did you do to or on your CVO today?
Post by: OBB on August 21, 2015, 06:16:18 AM
I had the Ohlins FKC-101 fork cartridges installed on my Ultra, and I have to say it was money well spent!  Thanks to Brian at Fuelmoto for the fast service! :2vrolijk_21:

I had put the Ohlins 159 shocks in back initially, and it really revealed the inadequate stock, front suspension.  Now that I finally installed the cartridges the bike not only brakes more stable, without diving, handles high speed turns much more stable, and actually provides a smoother ride! :apple:

I'll be enjoying the ride a lot more with a lot less stress on my back! :orange:
I just did the 159 in the rear yesterday and we did about 30 miles last night to dinner and back. You're right about the front end now. Seems I feel more bumps through the bars then I do the seat now.
Title: Re: What did you do to or on your CVO today?
Post by: Mr. Warlock on August 21, 2015, 08:42:52 AM
I just did the 159 in the rear yesterday and we did about 30 miles last night to dinner and back. You're right about the front end now. Seems I feel more bumps through the bars then I do the seat now.

I have the "home made" adjustable rear air suspension on mine and you are both correct. Once you get an awesome ride in the rear the front really shows itself as the POS it really is. I have the Harley front cartridges and it still sucks BAD.
Title: Re: What did you do to or on your CVO today?
Post by: Kingspoke on August 21, 2015, 12:27:48 PM
I just did the 159 in the rear yesterday and we did about 30 miles last night to dinner and back. You're right about the front end now. Seems I feel more bumps through the bars then I do the seat now.

Exactly what I was feeling harsh riding, transferred from the weak Harley front suspension components once the back was (Ohlins) stabilized.  Now that the front is stabilized I could re-set the rear settings to balance it out, & not having to compensate (the rear shock settings) for the weak front end.  This lead (to my happy surprise) a smoother ride over all.  I purposely hit uneven pavement and dips expecting the harshness,  but the forks absorbed the pavement with firmness, yet a smooth ride.
Title: Re: What did you do to or on your CVO today?
Post by: Kingspoke on August 21, 2015, 12:35:03 PM
I have the "home made" adjustable rear air suspension on mine and you are both correct. Once you get an awesome ride in the rear the front really shows itself as the POS it really is. I have the Harley front cartridges and it still sucks BAD.

Sorry to hear that.  I haven't ridden the Rushmore bikes, but will do so just for comparison. :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on August 21, 2015, 08:40:51 PM
Today I gave the bike a new pair of sneakers, i had a new front an rear tire fitted - went with Michelin Commander II's this time since the rear Dunlop cupped...... again ..... this time I only got 10,000 miles on the rear before it started to howl in the corners. but then again the first one only lasted about 12,000 miles before it also cupped. I did get 22,000 out of the front Dunlop though.

It aggravates me to replace a tire with plenty of tread depth left in the center third of the tire because the side tread cupped so bad. Maybe if we rode more highway miles and less backroads the tire wouldn't do that  :nixweiss:  But then that would be no fun  ;D

Title: Re: What did you do to or on your CVO today?
Post by: OBB on August 21, 2015, 09:01:33 PM
Today I gave the bike a new pair of sneakers, i had a new front an rear tire fitted - went with Michelin Commander II's this time since the rear Dunlop cupped...... again ..... this time I only got 10,000 miles on the rear before it started to howl in the corners. but then again the first one only lasted about 12,000 miles before it also cupped. I did get 22,000 out of the front Dunlop though.

It aggravates me to replace a tire with plenty of tread depth left in the center third of the tire because the side tread cupped so bad. Maybe if we rode more highway miles and less backroads the tire wouldn't do that  :nixweiss:  But then that would be no fun  ;D


Dunno about that. We've put 9,000 on ours since taking it out of the garage in April. OH to TX and back. A trip to WV, another to PA and numerous long day trips. Lots of highway miles on this bike already and my rear tire is starting to hum.  Seems as though the center gets worn before the outside and that's causes the cupping. Just a guess on my part.
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on August 21, 2015, 09:25:19 PM
Dunno about that. We've put 9,000 on ours since taking it out of the garage in April. OH to TX and back. A trip to WV, another to PA and numerous long day trips. Lots of highway miles on this bike already and my rear tire is starting to hum.  Seems as though the center gets worn before the outside and that's causes the cupping. Just a guess on my part.

My thinking is the other way around. I'm thinking the left an right third of the tire with the "enhanced lateral grip compounds" is softer than the center and therefore wearing unevenly due to the forces at work when we lean a 900+ pound machine into a corner and then twist the throttle to power out of that corner which will multiply the forces at work trying to tear the tread off the tire or cause it to loose grip and spin (which is generally a bad thing while leaned over).  - the quoted portion is from Dunlop's site -

I do want the tire to grip the road securely I just want even wear so I don't feel cheated when it's time to replace them.  Heck, I only get about 4000 - 6000 miles out of the tires on my Ducati, but they wear evenly....quickly...but evenly     
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on August 21, 2015, 11:39:15 PM
Well, today was special. I rode to work, rode over for coffee for my normal Friday Starbucks Coffee with Vickie  after my morning meeting and before she gets to work. Filled up the tank and back to the office. Funny thing about filling the tank this morning. I went to my usual place that has 100% 93 octane then on to work.
Lunch came and out to the bike heading home for a sandwich. Bike bucked, snorted and didnt want to start or run smoothly if it did. Rode back to the station (200 yards from my office) and there discovered that last evening, one of the employees put dyed off road diesel in the 100% 93 octane storage tank. Yes boys and girls, it was a special day. I got to spend 2 hours waiting for the tow truck to come and haul my 1 month old SERGU to K'ville HD on Clinton hwy where the entire fuel system can be drained and flushed clean of the mixed dyed diesel and 93 octane.
One plus in this great day is the new fuel tank and left side saddlebag were in (bad spots on the factory paint on both items) so at least the tank will be new and free from dyed diesel. Hope it's ready in a few days.
Hey, it could have been worse and happened in the middle of nowhere. The station owner is a good friend and was so sorry it had happened and will take care of all associated costs. He has the wonderful task now of what to do with 2600 gallons of the stuff.....yes, a special day it was.
Title: Re: What did you do to or on your CVO today?
Post by: DesertHOG on August 22, 2015, 02:21:11 AM
Well, today was special. I rode to work, rode over for coffee for my normal Friday Starbucks Coffee with Vickie  after my morning meeting and before she gets to work. Filled up the tank and back to the office. Funny thing about filling the tank this morning. I went to my usual place that has 100% 93 octane then on to work.
Lunch came and out to the bike heading home for a sandwich. Bike bucked, snorted and didnt want to start or run smoothly if it did. Rode back to the station (200 yards from my office) and there discovered that last evening, one of the employees put dyed off road diesel in the 100% 93 octane storage tank. Yes boys and girls, it was a special day. I got to spend 2 hours waiting for the tow truck to come and haul my 1 month old SERGU to K'ville HD on Clinton hwy where the entire fuel system can be drained and flushed clean of the mixed dyed diesel and 93 octane.
One plus in this great day is the new fuel tank and left side saddlebag were in (bad spots on the factory paint on both items) so at least the tank will be new and free from dyed diesel. Hope it's ready in a few days.
Hey, it could have been worse and happened in the middle of nowhere. The station owner is a good friend and was so sorry it had happened and will take care of all associated costs. He has the wonderful task now of what to do with 2600 gallons of the stuff.....yes, a special day it was.

Sorry to hear this. About 5 yrs ago a refinery in Albuquerque delivered diesel instead of gas to about 7 different stations in town. A lot of cars, trucks and motorcycles endured the same treatment you just went through.

Be safe and enjoy your ride,
DH

Title: Re: What did you do to or on your CVO today?
Post by: longlast on August 22, 2015, 07:45:36 AM
Begees Howard, What a way to close down the week :'(Glad you got it sorted with out a hole mess of tangled twine to deal with. I didn't know you have a new bike, I missed your thread on it, Belayed CONGRATULATIONS  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on August 22, 2015, 10:09:49 AM
Thanks Pete. Actually didn't do a thread on it. Got a '15 SERGU in blue. Great ride and my first blue bike and first fixed faring Harley. Hope to have it back in a day or so. Weather here is cooling off a bit and it's my kind of riding. The cooler, the better... :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: East Coast on August 22, 2015, 09:30:04 PM
Same here......as I was reading your thread I was like Daaaammn he bought another bike! I would have bet half the farm you would have bought the Ultra Violet and Lava Streetglide, lol.

Yes, what a day is right! Congrats and enjoy your new ride!
Title: Re: What did you do to or on your CVO today?
Post by: DesertHOG on August 22, 2015, 09:36:52 PM
Thanks Pete. Actually didn't do a thread on it. Got a '15 SERGU in blue. Great ride and my first blue bike and first fixed faring Harley. Hope to have it back in a day or so. Weather here is Collingwood a bit and it's my kind of riding in the cooler, the better... :2vrolijk_21:

Welcome to the Shark Tank!
Title: Re: What did you do to or on your CVO today?
Post by: GregKhougaz on August 22, 2015, 11:36:14 PM
Howard, you're very calm!  ;-)
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on August 23, 2015, 10:25:33 PM
Greg, no sense in getting hot or angry. It wouldn't change anything from what happened. It wasn't fun and not anything I would want to do again. It'll work out as all things do.
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on August 23, 2015, 10:30:35 PM
Got a ticket, crap...
Title: Re: What did you do to or on your CVO today?
Post by: JCZ on August 23, 2015, 10:44:55 PM
Got a ticket, crap...

https://www.youtube.com/watch?v=kcHpwlH5Pm0

And Radar Roy rides a CVO.....this is the radar detector that he uses on his bike. :2vrolijk_21:


https://www.youtube.com/watch?v=fes97hq-vS8


And buy it here....

http://www.amazon.com/Escort-Passport-Max2-Radar-Detector/dp/B00NJTNQ82


Money well spent!  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on August 23, 2015, 10:49:34 PM
https://www.youtube.com/watch?v=kcHpwlH5Pm0

And Radar Roy rides a CVO.....this is the radar detector that he uses on his bike. :2vrolijk_21:


https://www.youtube.com/watch?v=fes97hq-vS8


And buy it here....

http://www.amazon.com/Escort-Passport-Max2-Radar-Detector/dp/B00NJTNQ82


Money well spent!  :2vrolijk_21:
In was telling my buddy you rode with a detector and it worked, i am all over this.. They got me with radar
Title: Re: What did you do to or on your CVO today?
Post by: RGlideKid on August 24, 2015, 07:52:37 PM
Now that I've read the radar detector posts and decided nuh,uh...no way I'm spending $500+ on that thing...I'll get a ticket for sure.   :-X

I got rid of the "new and improved" saddlebag holder-on'ers they gave me for the recall and went to u-nuts and bolts and lock washers all around.  It's amazing how much better I felt afterward!   :P
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on August 24, 2015, 11:10:41 PM
Now that I've read the radar detector posts and decided nuh,uh...no way I'm spending $500+ on that thing...I'll get a ticket for sure.   :-X

I got rid of the "new and improved" saddlebag holder-on'ers they gave me for the recall and went to u-nuts and bolts and lock washers all around.  It's amazing how much better I felt afterward!   :P
I agree its a lot of money but it really did ruin my ride yesterday and I don't want to gone thru that again! Also by the time its all over I will almost spend that much on this da== ticket. The next one would cost me even more since I will use my traffic school "ticket" upon this one. I have 3 early 20's drivers on my insurance so I have to do everything I  can to avoid another ticket! Yea I know, I could always slow down like my wife suggested but thats just simply not an option..
Title: Re: What did you do to or on your CVO today?
Post by: RGlideKid on August 25, 2015, 09:34:24 AM
I agree its a lot of money but it really did ruin my ride yesterday and I don't want to gone thru that again! Also by the time its all over I will almost spend that much on this da== ticket. The next one would cost me even more since I will use my traffic school "ticket" upon this one. I have 3 early 20's drivers on my insurance so I have to do everything I  can to avoid another ticket! Yea I know, I could always slow down like my wife suggested but thats just simply not an option..

Oh, I hear ya, Alan.  Especially with that awesome engine you have!  I would end up with many tickets.  Heck, I take chances with mine often enough, especially when I'm riding solo.
Guess I need to investigate detectors again.  I bought a Passport back in the late 80's and paid $300 for it then, which makes the $500 today cheaper by comparison.
Hmmmm...am I talking myself into this now?   :'(
Title: Re: What did you do to or on your CVO today?
Post by: JCZ on August 25, 2015, 10:26:35 AM
Now that I've read the radar detector posts and decided nuh,uh...no way I'm spending $500+ on that thing...I'll get a ticket for sure.   :-X

I got rid of the "new and improved" saddlebag holder-on'ers they gave me for the recall and went to u-nuts and bolts and lock washers all around.  It's amazing how much better I felt afterward!   :P

I remember when I thought that same thing.  After a couple more tickets I thought "damn, I could of had that detector paid for by the second ticket".  And now that the detectors have came so far in detecting false signals......it was a no brainer.  I hope I don't regret saying this but..........haven't had a ticket since.   :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: JCZ on August 25, 2015, 10:27:44 AM
I agree its a lot of money but it really did ruin my ride yesterday and I don't want to gone thru that again! Also by the time its all over I will almost spend that much on this da== ticket. The next one would cost me even more since I will use my traffic school "ticket" upon this one. I have 3 early 20's drivers on my insurance so I have to do everything I  can to avoid another ticket! Yea I know, I could always slow down like my wife suggested but thats just simply not an option..

Now there's a statement that a few of us can relate to.   :bananarock:
Title: Re: What did you do to or on your CVO today?
Post by: WestCoastRuss on August 25, 2015, 12:53:03 PM
 :pepper:
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on August 25, 2015, 09:56:07 PM
https://www.youtube.com/watch?v=kcHpwlH5Pm0

And Radar Roy rides a CVO.....this is the radar detector that he uses on his bike. :2vrolijk_21:


https://www.youtube.com/watch?v=fes97hq-vS8


And buy it here....

http://www.amazon.com/Escort-Passport-Max2-Radar-Detector/dp/B00NJTNQ82


Money well spent!  :2vrolijk_21:

Yep, that detector is worth it.  It has paid for itself several times in my 14 Stingray.  First time I was in triple digits when it went off, was doing 72  in a 70 mph zone when I went past the KY State trooper. 8)  Another I was doing 65 on a twisty road posted at 35.  Gives a pretty long warning usually.  Also not a whole lot of false alarms.
Title: Re: What did you do to or on your CVO today?
Post by: Chains on August 25, 2015, 10:10:08 PM
Last night I was sitting around and thought damn I haven't been on a good ride since the West Virginia GTG.  Thought for a second and told my wife think I will go to the Dragon tomorrow.

So got up had a cup of coffee and headed off.  Perfect day for a ride.  Bought gas in Athens Tennessee for $1.93 and then hit the back roads.  Got there a little after 1:00 and did my ride.  Got to say the bike handles great with the 12 inch bars.  Thought about all the guys that had to work today, but not for long.  :huepfenlol2:
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on August 25, 2015, 10:20:29 PM
Last night I was sitting around and thought damn I haven't been on a good ride since the West Virginia GTG.  Thought for a second and told my wife think I will go to the Dragon tomorrow.

So got up had a cup of coffee and headed off.  Perfect day for a ride.  Bought gas in Athens Tennessee for $1.93 and then hit the back roads.  Got there a little after 1:00 and did my ride.  Got to say the bike handles great with the 12 inch bars.  Thought about all the guys that had to work today, but not for long.  :huepfenlol2:




Pure meanness there, LOL
Title: Re: What did you do to or on your CVO today?
Post by: tdkkart on August 26, 2015, 01:13:43 AM
Did the 5000mi oil change, which means we've covered 4000mi since buying it in June, and it still amazes me every time I get on it.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on August 26, 2015, 06:22:43 AM
Last night I was sitting around and thought damn I haven't been on a good ride since the West Virginia GTG.  Thought for a second and told my wife think I will go to the Dragon tomorrow.

So got up had a cup of coffee and headed off.  Perfect day for a ride.  Bought gas in Athens Tennessee for $1.93 and then hit the back roads.  Got there a little after 1:00 and did my ride.  Got to say the bike handles great with the 12 inch bars.  Thought about all the guys that had to work today, but not for long.  :huepfenlol2:
Thanks Jim. I'm gonna do a rain dance for you for the next week. :P
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on August 26, 2015, 06:29:36 AM
Thanks Jim. I'm gonna do a rain dance for you for the next week. :P

I'm so jealous!!!!!!
Title: Re: What did you do to or on your CVO today?
Post by: Chains on August 26, 2015, 08:36:37 AM
You can't tell by my face, it but I am really sad about all my friends having to work.
Title: Re: What did you do to or on your CVO today?
Post by: Chains on August 26, 2015, 08:42:47 AM
Maybe this one can tell the story
Title: Re: What did you do to or on your CVO today?
Post by: Chains on August 26, 2015, 08:44:31 AM
Now I think this is the one.
Title: Re: What did you do to or on your CVO today?
Post by: Chains on August 26, 2015, 09:17:36 AM
By the way there were straight areas in the roads too.
Title: Re: What did you do to or on your CVO today?
Post by: East Coast on August 26, 2015, 09:36:49 AM
Awesome, sounds like a perfect day!


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: East Coast on August 26, 2015, 09:42:30 AM
I installed a set of passenger floorboards and re adjusted the highway mounts/pegs. I have a week of vacation coming up so I ordered a set of 10" Yaffe Bagger Monkey Bars, Alloy Art poly riser bushings and Namz 4" wire extensions just in case. Can't wait to get the bars on!


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Chains on August 26, 2015, 10:11:13 AM
I installed a set of passenger floorboards and re adjusted the highway mounts/pegs. I have a week of vacation coming up so I ordered a set of 10" Yaffe Bagger Monkey Bars, Alloy Art poly riser bushings and Namz 4" wire extensions just in case. Can't wait to get the bars on!


Sent from my iPhone using Tapatalk

You will love them, I can honestly ride all day now without and cramping or soreness in my neck and shoulders.  Old bars gave me a burning sensation at 100 miles I have ridden over 900 miles in a day with these and feel great. 
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on August 26, 2015, 08:26:48 PM
Now I think this is the one.

What comes after jealous? Whatever it is that's what I am....
Title: Re: What did you do to or on your CVO today?
Post by: Chains on August 26, 2015, 08:31:45 PM
What comes after jealous? Whatever it is that's what I am....

Mike,

I really hate to rub it in but I will.  Just got a super deal on a set of Black Saddlebags off a 2012 Ultra the guy is turning into a trike.  Wouldn't you figure he is in the North Georgia mountains so I guess I will have to ride my bike and pull my unmatched trailer to get them on Friday.  Not a bad ride 180 miles one way.

Title: Re: What did you do to or on your CVO today?
Post by: Miss Susan on August 26, 2015, 08:33:42 PM
Last night I was sitting around and thought damn I haven't been on a good ride since the West Virginia GTG.  Thought for a second and told my wife think I will go to the Dragon tomorrow.

So got up had a cup of coffee and headed off.  Perfect day for a ride.  Bought gas in Athens Tennessee for $1.93 and then hit the back roads.  Got there a little after 1:00 and did my ride.  Got to say the bike handles great with the 12 inch bars.  Thought about all the guys that had to work today, but not for long.  :huepfenlol2:
  :(  Man, you really know how to hurt a person!  Just kidding, glad you had a safe, great ride. Hopefully we'll have lots of those in The Valley.

Miss Susan
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on August 26, 2015, 08:38:16 PM
Mike,

I really hate to rub it in but I will.  Just got a super deal on a set of Black Saddlebags off a 2012 Ultra the guy is turning into a trike.  Wouldn't you figure he is in the North Georgia mountains so I guess I will have to ride my bike and pull my unmatched trailer to get them on Friday.  Not a bad ride 180 miles one way.

I wouldn't pull that ugly trailer that far, ride the truck...LOL
Title: Re: What did you do to or on your CVO today?
Post by: OBB on August 26, 2015, 09:07:26 PM
Mike,

I really hate to rub it in but I will.  Just got a super deal on a set of Black Saddlebags off a 2012 Ultra the guy is turning into a trike.  Wouldn't you figure he is in the North Georgia mountains so I guess I will have to ride my bike and pull my unmatched trailer to get them on Friday.  Not a bad ride 180 miles one way.


Leave your bags at home, ride up, install the other ones on your bike and ride home. It's gonna rain anyway. I paid off Mother Nature  :huepfenlol2:
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on August 26, 2015, 09:13:51 PM
Leave your bags at home, ride up, install the other ones on your bike and ride home. It's gonna rain anyway. I paid off Mother Nature  :huepfenlol2:

It's bad enough his trailer don't match, picture his bike with black bags.  ;D
Title: Re: What did you do to or on your CVO today?
Post by: Chains on August 26, 2015, 10:08:30 PM
It's bad enough his trailer don't match, picture his bike with black bags.  ;D

Red trailer was really bad but this one is not even in the same color group at all. Come to think of it will probably look better.
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on August 26, 2015, 10:11:43 PM
Red trailer was really bad but this one is not even in the same color group at all. Come to think of it will probably look better.

What did you do with the Red one?
Title: Re: What did you do to or on your CVO today?
Post by: Chains on August 26, 2015, 10:13:53 PM
Red one is out to paint. I bought the paint $254.00 a pint.  Should be done by MV. If its wrong this time its on me.
Title: Re: What did you do to or on your CVO today?
Post by: Chains on August 27, 2015, 09:03:04 PM
OK got some more pictures today, being a sharing kind of a guy I thought I would post them.
Title: Re: What did you do to or on your CVO today?
Post by: Chains on August 27, 2015, 09:06:50 PM
Number 5
Title: Re: What did you do to or on your CVO today?
Post by: Chains on August 27, 2015, 09:07:42 PM
Number 6
Title: Re: What did you do to or on your CVO today?
Post by: MIKEYTEE on August 27, 2015, 09:20:33 PM
Jim I tried to tell you, a basic black trailer goes with everything.
Mike
 :drink:
Title: Re: What did you do to or on your CVO today?
Post by: OBB on August 27, 2015, 09:37:55 PM
Jim I tried to tell you, a basic black trailer goes with everything.
Mike
 :drink:
I think he recycle yesterdays pix. Just flipped them backwards so we'd think he was on a different road......  ::)
Title: Re: What did you do to or on your CVO today?
Post by: Chains on August 27, 2015, 09:39:25 PM
Wish I would have thought of that would have saved me $18.00
 :huepfenlol2:
Title: Re: What did you do to or on your CVO today?
Post by: wrayzor on August 27, 2015, 11:38:31 PM
Added some blue LEDs to the engine area
(http://i62.tinypic.com/3484x1w.jpg)
(http://i62.tinypic.com/2qi347b.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: MrSurly on August 28, 2015, 05:19:23 PM
Picked up the 30-tooth sprocket today. I'm gonna tackle that upgrade this weekend.
Title: Re: What did you do to or on your CVO today?
Post by: Chains on August 28, 2015, 06:08:51 PM
Rode over to North West Georgia to pick up a pair of 2012 Ultra black saddlebags I bought off a guy that triked his bike. Pulled my non matching Bushtec trailer. Beautiful morning great day to ride got in 320 miles today, not bad.
Title: Re: What did you do to or on your CVO today?
Post by: Chains on August 28, 2015, 06:16:14 PM
Alabama mountains about 30 miles from Georgia
Title: Re: What did you do to or on your CVO today?
Post by: Chains on August 28, 2015, 06:17:17 PM
Coming into the Georgia Mountains
Title: Re: What did you do to or on your CVO today?
Post by: Chains on August 28, 2015, 06:18:06 PM
Last but not least the odd couple
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on August 28, 2015, 06:20:44 PM
Alabama mountains about 30 miles from Georgia

Boy,...

I thought we had some steep mountains, but them there ones is straight up!!!!! LOL

I got dizzy looking at em
Title: Re: What did you do to or on your CVO today?
Post by: MrSurly on August 28, 2015, 06:29:39 PM
Straight up sideways!


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Chains on August 28, 2015, 07:07:42 PM
Not sure why they turned out sideways.
Title: Re: What did you do to or on your CVO today?
Post by: MIKEYTEE on August 28, 2015, 07:30:07 PM
Jim
I think the black bags would look good on your bike. Why don't you put them on and take a picture then post it here. That way we could see how it would look. Hey, we may start a new trend.
Mike
 :drink:
Title: Re: What did you do to or on your CVO today?
Post by: Chains on August 29, 2015, 03:10:51 PM
How about red leds
Title: Re: What did you do to or on your CVO today?
Post by: Chains on August 29, 2015, 03:11:43 PM
Or blue
Title: Re: What did you do to or on your CVO today?
Post by: Chains on August 29, 2015, 03:12:26 PM
Purple too
Title: Re: What did you do to or on your CVO today?
Post by: longlast on August 29, 2015, 05:01:20 PM
                               From a scale of  1 to 10 by the photos.

                               Red - 4

                               Blue - 7
         
                               Purple - 10

                                        Works for me, my two bits worth  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on August 29, 2015, 05:52:33 PM
Blue is the one color that will make any bike look better!
Title: Re: What did you do to or on your CVO today?
Post by: Chains on August 29, 2015, 05:58:20 PM
Once I get a new relay installed so the green works again I should be able to get a larger mixture of colors. Thats a different project for down time just in case I screw up the board its on.
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on August 30, 2015, 09:28:50 AM
Susan and I rode up to the HD Dealer in Hico, New River Gorge, to see the 2016 models they had received. They did not have any CVO bikes yet but are expecting a white/black street glide within the week.
They had a couple of road glide ultras, a limited, a limited low, a steet glide special and a fat boy slim s. The Slim S had the 110 motor and for a brief second I thought it might be coming home with us. Miss Susan was able to stand this bike up and reach the brake pedal and such, but was unable to reach the side stand to put it up/down. Oh well no new bike for her this year.LOL
Title: Re: What did you do to or on your CVO today?
Post by: ONE2BAJA on August 30, 2015, 05:08:28 PM
A group of us rode to Knoxville, IA to a protest.  A veteran made a silhouette in remembrance for a buddy that was killed in Vietnam.  It is a soldier kneeling down holding his gun at a grave with a cross.  It was placed at a city park leaned up to the flag pole next to a freedom rock that is painted for guys in the military.  The park is next to a closed Veterans Hospital that is now closed.  A chicken chit resident has complained that they are offended and wants it removed off public land.  They have now contacted an atheist organization that help fight situations like this called Americas United.  It has turned the town into an uproar.  There was probably 2000-3000 (just guessing) proud veterans, bikers and supporters to fight to keep it there.  We need to fight for our rights.  Just because one idiot is offended.  What about our rights?  We are losing our rights every day and keep getting father away from following the Constitution!  God bless this country and stand up and fight these idiots.  If it wasn't for our armed forces and brave men these aholes , chicken chit idiots wouldn't not know what to do without the freedom they have given us!

link to a local tv station covering the story

http://whotv.com/2015/08/19/city-of-knoxville-asked-to-remove-veteran-memorial-cross-from-park/

 
Title: Re: What did you do to or on your CVO today?
Post by: MrSurly on August 31, 2015, 08:52:50 AM
Completed install of
30 tooth sprocket conversion
Gusset mod of swing arm
Built 2-1/4" deep socket
Continuing to use stock belt (8000mi on it)
Modded Barnett scorpion clutch (crap design) to allow oiling of release bearing.
Replaced bearing (crap design) with 7200 series angular contact open bearing
Main trans seal
Shift shaft seal
Primary case seal
Primary case bearing
Installed new rear brake pads EBC HH.
Replaced dzus pins in saddlebags with thumb knob bolts and J-nuts



Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Mr. Warlock on August 31, 2015, 09:58:01 AM
Completed install of
30 tooth sprocket conversion
Gusset mod of swing arm
Built 2-1/4" deep socket
Continuing to use stock belt (8000mi on it)
Modded Barnett scorpion clutch (crap design) to allow oiling of release bearing.
Replaced bearing (crap design) with 7200 series angular contact open bearing
Main trans seal
Shift shaft seal
Primary case seal
Primary case bearing
Installed new rear brake pads EBC HH.
Replaced dzus pins in saddlebags with thumb knob bolts and J-nuts



Sent from my iPhone using Tapatalk

You've been a busy boy!!
Title: Re: What did you do to or on your CVO today?
Post by: MrSurly on August 31, 2015, 01:22:02 PM
You've been a busy boy!!


And I keep thinking "I'll be done soon!"
Title: Re: What did you do to or on your CVO today?
Post by: T-Roy on August 31, 2015, 02:13:44 PM
Completed install of
30 tooth sprocket conversion
Gusset mod of swing arm
Built 2-1/4" deep socket
Continuing to use stock belt (8000mi on it)
Modded Barnett scorpion clutch (crap design) to allow oiling of release bearing.
Replaced bearing (crap design) with 7200 series angular contact open bearing
Main trans seal
Shift shaft seal
Primary case seal
Primary case bearing
Installed new rear brake pads EBC HH.
Replaced dzus pins in saddlebags with thumb knob bolts and J-nuts



Sent from my iPhone using Tapatalk

I was wondering what you did to the Barnett release bearing? I have already had mine fail once.
Title: Re: What did you do to or on your CVO today?
Post by: MrSurly on August 31, 2015, 05:12:39 PM
I was wondering what you did to the Barnett release bearing? I have already had mine fail once.


I posted a thread here: http://www.cvoharley.com/smf/index.php?topic=103989.new#new

I think the opening of the area that shrouds the bearing is of major importance.
Title: Re: What did you do to or on your CVO today?
Post by: Pan1 on September 01, 2015, 11:19:41 PM
Yep, it was raining today so I just watched it depreciate in the garage and started it up once or twice to be sure that annoying valve train noise was still there. Dealer said that ticking noise was installed to drown out the rain drops hitting the roof of my garage.
Title: Re: What did you do to or on your CVO today?
Post by: cambo on September 02, 2015, 09:26:51 PM
Yep, it was raining today so I just watched it depreciate in the garage and started it up once or twice to be sure that annoying valve train noise was still there. Dealer said that ticking noise was installed to drown out the rain drops hitting the roof of my garage.
:huepfenlol2:
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on September 02, 2015, 09:34:27 PM
Yep, it was raining today so I just watched it depreciate in the garage and started it up once or twice to be sure that annoying valve train noise was still there. Dealer said that ticking noise was installed to drown out the rain drops hitting the roof of my garage.
That must'a been a dealer installed option......
I can still hear the rain when my bikes running.
Title: Re: What did you do to or on your CVO today?
Post by: bigC on September 06, 2015, 07:02:37 PM
I added the CB radio to my SESG.
Title: Re: What did you do to or on your CVO today?
Post by: RGlideKid on September 06, 2015, 08:25:46 PM
Completed the installation of the Screamin' Eagle chrome emblem purchased from Custom Billet Works here on this website.  And it looks awesome and the workmanship was flawless!
Title: Re: What did you do to or on your CVO today?
Post by: longlast on September 06, 2015, 11:15:09 PM
Completed the installation of the Screamin' Eagle chrome emblem purchased from Custom Billet Works here on this website.  And it looks awesome and the workmanship was flawless!


Looks good well done :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: East Coast on September 07, 2015, 07:13:17 PM
Finished up installing a set of 10" Yaffe Monkey Bars. So far so good.  :drink:  I ordered a set of HD mirrors last week and was told Friday they may be in tomorrow.
Title: Re: What did you do to or on your CVO today?
Post by: ONE2BAJA on September 07, 2015, 08:17:23 PM
Put my chrome Screaming Eagle emblem on from Jim at Custom Billet Works
Title: What did you do to or on your CVO today?
Post by: MrSurly on September 08, 2015, 10:11:06 AM
I got a little too rambunctious on the launch  :whistling:
(http://images.tapatalk-cdn.com/15/09/08/e7d752b7f6a0783d5c5f8914adbcc9a6.jpg)

I still like that 30-tooth!
Title: Re: What did you do to or on your CVO today?
Post by: Dejad on September 08, 2015, 12:57:42 PM
I added the little chrome ring around the indicator window...
Title: Re: What did you do to or on your CVO today?
Post by: Nicky Pass on September 08, 2015, 05:59:10 PM
Finished up installing a set of 10" Yaffe Monkey Bars. So far so good.  :drink:  I ordered a set of HD mirrors last week and was told Friday they may be in tomorrow.

Ohhhhhhhhhhhh.....I like those!
Title: Re: What did you do to or on your CVO today?
Post by: J Heinlein on September 08, 2015, 08:17:34 PM
Quick question East Coast, were the Stock  brake and clutch lines long enough ??  We put a set of 10" LA choppers on my buddies last week and they were long enough.  Yaffe looks to be a little higher of a bar  which  I like. Just want to order all that is needed.  We got the plug and play for the wiring but didn't need the cables.  Any comments would be great, Thx
Title: Re: What did you do to or on your CVO today?
Post by: East Coast on September 08, 2015, 08:38:46 PM
Quick question East Coast, were the Stock  brake and clutch lines long enough ??  We put a set of 10" LA choppers on my buddies last week and they were long enough.  Yaffe looks to be a little higher of a bar  which  I like. Just want to order all that is needed.  We got the plug and play for the wiring but didn't need the cables.  Any comments would be great, Thx

JH,
The brake and clutch cables are long enough. You may have to cut a few wire ties and re route the clutch cable and by that I mean literally move it a little. If you remove the stock female plug ends for the switch wiring from there stock location under the infotainment system and push them back up towards the gas tank you will be fine with wire length. I had purchased a set of 4" wire extensions from Namz so I didn't move the female plugs up. If you order extensions which are plug and play order a little longer, 6" or 8" inch. That will give you a little more than I had to work with.

Feeding the wires through the bars on the throttle side was a bit challanging but patience and persistance paid off. The bars look nice, feel good too.

Good luck, hope that helps a bit.

Additionally, I ordered a set of Alloy Art good and tite poly riser bushings to replace the stock rubber riser bushings. I emailed them, they told me to use the GT-2's. The stock bolts were not long enough to go through the Alloy Art bushings and back into the lower riser clamp. I removed them and put the stock bushings back for now. So, heads up on that if your planning on replacing the riser bushings. I was in get it done mode and didn't want to run out for longer bolts. I'll replace them over the winter.
Title: Re: What did you do to or on your CVO today?
Post by: J Heinlein on September 08, 2015, 08:46:57 PM
Thx for the quick response and advise.   I will use the wire extensions for sure.  We did on my buddies bike as well. 
Title: Re: What did you do to or on your CVO today?
Post by: East Coast on September 08, 2015, 08:54:58 PM
Your welcome. Well worth it and you can save a step. Keep as posted.  :drink:
Title: Re: What did you do to or on your CVO today?
Post by: T-Roy on September 13, 2015, 11:14:37 AM
I had a heck of a day yesterday. I picked my bike up from the Harley shop after having them R&R a throttle body for me. A buddy and me were riding and we were about 70 miles from home when gas started pouring out of my bike. We quickly pulled into a CVS Pharmacy parking lot and I shut the bike down and bailed off because the gas hitting the hot engine was starting to smoke. Thank god the bike cooled off without anything flaming up!! It turned out that the Love Jugs cooling fan bracket was adjusted too low and was resting on the fuel line that goes from the tank quick disconnect to the injectors. This of course had rubbed a hole in the line just before the fitting that plugs into the injectors. I called the local Harley shop and they did not have a pick up transport available and also did not have the hose in stock either. No Harley shop within 100 miles had the hose in stock. I was on the phone to line up a tow when a local guy walked up and said a local auto parts store could make the hose. Well my buddy and I decided it was worth a shot so we tore her down in the CVS parking lot with the tools we had that came with the bikes and some nail clipper bought from the CVS to cut zip ties. We even had to pull the tank to get to the cooling fan bracket. As soon as we got the hose off of the bike another local guy pulled up on his bike so I showed him the hose and asked him if he knew the best place in town to get a hose made. Well he said I should call an INDY shop called The Bike Shop which was an INDY Harley repair shop just a few miles away. So I called him. When he answered the phone I asked if he was open because it was 4PM on a Saturday. He said no but I am here what can I do for you. I told him the whole story and he said I tell you what I have a brand new bike on the lift the tank is already removed I am putting different bars and other stuff on it so it will be down for a few days anyway. He removed the hose from that bike and sold it to me just for the amount of money it will take to get another one!! Of course I gave him cash money and included a tip which I had to force him to take. We got my bike back together with the cooling fan bracket adjusted properly of course and she runs like a champ again......SO if anyone breaks down in the Lafayette Louisiana area I HIGHLY RECCOMEND that you call The Bike Shop!!!!
Title: Re: What did you do to or on your CVO today?
Post by: Nicky Pass on September 13, 2015, 11:20:41 AM
I had a heck of a day yesterday. I picked my bike up from the Harley shop after having them R&R a throttle body for me. A buddy and me were riding and we were about 70 miles from home when gas started pouring out of my bike. We quickly pulled into a CVS Pharmacy parking lot and I shut the bike down and bailed off because the gas hitting the hot engine was starting to smoke. Thank god the bike cooled off without anything flaming up!! It turned out that the Love Jugs cooling fan bracket was adjusted too low and was resting on the fuel line that goes from the tank quick disconnect to the injectors. This of course had rubbed a hole in the line just before the fitting that plugs into the injectors. I called the local Harley shop and they did not have a pick up transport available and also did not have the hose in stock either. No Harley shop within 100 miles had the hose in stock. I was on the phone to line up a tow when a local guy walked up and said a local auto parts store could make the hose. Well my buddy and I decided it was worth a shot so we tore her down in the CVS parking lot with the tools we had that came with the bikes and some nail clipper bought from the CVS to cut zip ties. We even had to pull the tank to get to the cooling fan bracket. As soon as we got the hose off of the bike another local guy pulled up on his bike so I showed him the hose and asked him if he knew the best place in town to get a hose made. Well he said I should call an INDY shop called The Bike Shop which was an INDY Harley repair shop just a few miles away. So I called him. When he answered the phone I asked if he was open because it was 4PM on a Saturday. He said no but I am here what can I do for you. I told him the whole story and he said I tell you what I have a brand new bike on the lift the tank is already removed I am putting different bars and other stuff on it so it will be down for a few days anyway. He removed the hose from that bike and sold it to me just for the amount of money it will take to get another one!! Of course I gave him cash money and included a tip which I had to force him to take. We got my bike back together with the cooling fan bracket adjusted properly of course and she runs like a champ again......SO if anyone breaks down in the Lafayette Louisiana area I HIGHLY RECCOMEND that you call The Bike Shop!!!!

Places and guys like this are hard to find!  He deserves a shout out!
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on September 13, 2015, 02:13:39 PM
I had a heck of a day yesterday. I picked my bike up from the Harley shop after having them R&R a throttle body for me. A buddy and me were riding and we were about 70 miles from home when gas started pouring out of my bike. We quickly pulled into a CVS Pharmacy parking lot and I shut the bike down and bailed off because the gas hitting the hot engine was starting to smoke. Thank god the bike cooled off without anything flaming up!! It turned out that the Love Jugs cooling fan bracket was adjusted too low and was resting on the fuel line that goes from the tank quick disconnect to the injectors. This of course had rubbed a hole in the line just before the fitting that plugs into the injectors. I called the local Harley shop and they did not have a pick up transport available and also did not have the hose in stock either. No Harley shop within 100 miles had the hose in stock. I was on the phone to line up a tow when a local guy walked up and said a local auto parts store could make the hose. Well my buddy and I decided it was worth a shot so we tore her down in the CVS parking lot with the tools we had that came with the bikes and some nail clipper bought from the CVS to cut zip ties. We even had to pull the tank to get to the cooling fan bracket. As soon as we got the hose off of the bike another local guy pulled up on his bike so I showed him the hose and asked him if he knew the best place in town to get a hose made. Well he said I should call an INDY shop called The Bike Shop which was an INDY Harley repair shop just a few miles away. So I called him. When he answered the phone I asked if he was open because it was 4PM on a Saturday. He said no but I am here what can I do for you. I told him the whole story and he said I tell you what I have a brand new bike on the lift the tank is already removed I am putting different bars and other stuff on it so it will be down for a few days anyway. He removed the hose from that bike and sold it to me just for the amount of money it will take to get another one!! Of course I gave him cash money and included a tip which I had to force him to take. We got my bike back together with the cooling fan bracket adjusted properly of course and she runs like a champ again......SO if anyone breaks down in the Lafayette Louisiana area I HIGHLY RECCOMEND that you call The Bike Shop!!!!
that is actually a very cool story. Obviously not the gas pouring out part but the fact people helped. Glad your day was not completely ruined and nothing was permanently damaged.
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on September 13, 2015, 02:21:28 PM
I did absolutely nothing on my CVO today after having that major "brain fart" last weekend and bending my bars. To make matters worse, I couldn't just put the same bars back on heaven forbid, that would be way too easy. I had to try the new Reaper bars from Chubby as well as the Carlini's to see which I liked better. Of course I didn't take into account that both of those bars grip spots are lower than the top of the stated rise so after tearing the bike apart, I noe need to order both bars in the next size up so I am sitting here in my chair posting on a beautiful Sunday afternoon instead of out there doing what I love to do on the weekends, ride my bike! here is a pic of what it looks like right now..
Notice the new Arc 600 series amps I added last week.
Title: Re: What did you do to or on your CVO today?
Post by: cambo on September 14, 2015, 01:00:14 PM
I did absolutely nothing on my CVO today after having that major "brain fart" last weekend and bending my bars. To make matters worse, I couldn't just put the same bars back on heaven forbid, that would be way too easy. I had to try the new Reaper bars from Chubby as well as the Carlini's to see which I liked better. Of course I didn't take into account that both of those bars grip spots are lower than the top of the stated rise so after tearing the bike apart, I noe need to order both bars in the next size up so I am sitting here in my chair posting on a beautiful Sunday afternoon instead of out there doing what I love to do on the weekends, ride my bike! here is a pic of what it looks like right now..
Notice the new Arc 600 series amps I added last week.

Seriously cool ink Alan! Oh, and your bike looks like it's almost ready to hit the road again (no pun intended)!  ;D
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on September 14, 2015, 04:53:17 PM
No work on the bike for me over the weekend, we had such great weather, I had to just get out and ride.
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on September 14, 2015, 05:54:50 PM
went for ride so i could watch it turn 40k miles on the odometer. oh and had the rear wheel bearing(s) replaced, some how the rear wheel hub area was full of water... :nixweiss: not sure if the bearing went and allowed water in or if the water took the bearing out :nixweiss: but it is smooth as butter now rolling down the road. all ready for BBB next week see ya there
Title: Re: What did you do to or on your CVO today?
Post by: Jock on September 14, 2015, 08:20:52 PM
Well I got it towed in to be repaired after being rear-ended on an interstate highway Labor Day!

 :(

Title: Re: What did you do to or on your CVO today?
Post by: FXD_TG on September 14, 2015, 09:21:05 PM
After a Labor Day weekend trip to Gatlinburg via the Cherohala Skyway & Cherokee, NC, Blue was showing 17k miles and had cupped out her 2nd Dunlop D407 rear tire.  So, it was over to Atlanta Harley-Davidson on Friday for some fresh rubber.  On the bright side, the first D407 only lasted 7,400 miles. The second one made it 9,600.

The prerequisite hero shot from the Skyway crossing... before we hit the downpour near the summit!

(https://ridingtwoup.files.wordpress.com/2015/09/version-2.jpg?w=660&h=842)

Chewed-up rear tire that was singing the "time to replace me" song all the way home.

(https://ridingtwoup.files.wordpress.com/2015/09/20150907_154527.jpg?w=660&h=540)
Title: Re: What did you do to or on your CVO today?
Post by: brwk on September 15, 2015, 12:13:56 PM
Received a BIG stone chip in my front fender....ugh
Title: Re: What did you do to or on your CVO today?
Post by: OBB on September 15, 2015, 07:26:51 PM
After a Labor Day weekend trip to Gatlinburg via the Cherohala Skyway & Cherokee, NC, Blue was showing 17k miles and had cupped out her 2nd Dunlop D407 rear tire.  So, it was over to Atlanta Harley-Davidson on Friday for some fresh rubber.  On the bright side, the first D407 only lasted 7,400 miles. The second one made it 9,600.

The prerequisite hero shot from the Skyway crossing... before we hit the downpour near the summit!

(https://ridingtwoup.files.wordpress.com/2015/09/version-2.jpg?w=660&h=842)

Chewed-up rear tire that was singing the "time to replace me" song all the way home.

(https://ridingtwoup.files.wordpress.com/2015/09/20150907_154527.jpg?w=660&h=540)
Pretty little woman on the back of your bike playing grabass with you and you look grouchy. What's up with that?  :huepfenlol2:
Title: Re: What did you do to or on your CVO today?
Post by: East Coast on September 15, 2015, 09:56:37 PM
Well I got it towed in to be repaired after being rear-ended on an interstate highway Labor Day!

 :(

Ugh.... I hope your okay and the bike gets fixed quickly!
Title: Re: What did you do to or on your CVO today?
Post by: Chains on September 15, 2015, 10:23:29 PM
Hooked my Bushtec trailer up just checking it out after putting led tail lights in. When I pulled brake lever tail lights and side markers went out. Tore into the trailer wiring looking for a short, didn't find a thing.  Sat back looked at bike and thought well maybe something went wrong with the wire harness. Turned out the splitter that the previous owners dealer made up shorted out inside the connector.  Luckily I always have a Bushtec harness or two laying around so I scavenged the splitter off one of them and soldered all the harness wires in.  No problems anymore.

Now tomorrow I will put the trailer wire sheathing back on underneath it.
Title: Re: What did you do to or on your CVO today?
Post by: FXD_TG on September 15, 2015, 10:29:59 PM
Quote from: OBB
Pretty little woman on the back of your bike playing grabass with you and you look grouchy. What's up with that?  :huepfenlol2:

She always has her hands down on my hips and being in the mountains I was "on the job" as it were; however, we do have our lighter moments on and off the bike.  ;)

(https://ridingtwoup.files.wordpress.com/2015/09/20150906_103953.jpg?w=360) (https://ridingtwoup.files.wordpress.com/2015/09/20150906_170407.jpg?w=360) (https://ridingtwoup.files.wordpress.com/2015/08/fb_img_1439073503308.jpg?w=360)
Title: Re: What did you do to or on your CVO today?
Post by: Kingspoke on September 15, 2015, 11:58:29 PM
Installed the OPT7 (Cree) 881 LED replacement bulbs for my driving lights.  What a difference!  I also have the Custom Dynamics LED turn signals (previously installed).  Tomorrow, I'll install the OPT7 H11 headlight bulbs! :jalapeno:
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on September 16, 2015, 02:44:43 PM
Installed the OPT7 (Cree) 881 LED replacement bulbs for my driving lights.  What a difference!  I also have the Custom Dynamics LED turn signals (previously installed).  Tomorrow, I'll install the OPT7 H11 headlight bulbs! :jalapeno:
They look great!  I added the LED turn signal lights on a couple years ago and just changed the front turn signals to dynamic ringz. 
Title: Re: What did you do to or on your CVO today?
Post by: Kingspoke on September 16, 2015, 04:14:02 PM
Thanks! :2vrolijk_21:  Just did the headlight, and man what a difference.  I won't be needing the Hi Beam (H11) between the passing/driving lights, Custom Dynamic Ringz, and H11 (OPT7) Low Beam.  Really lights up the place.  Only negative, if you can call it that is the red dot on the tip of the H11 bulb.
Title: Re: What did you do to or on your CVO today?
Post by: Cyclegirl on September 16, 2015, 08:15:34 PM
Sat down and dreamed of being in Maggie Valley


Sent from my iPad using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: TinSpinner on September 16, 2015, 09:26:24 PM
Strapped on the luggage, cleaned the windscreen, checked the oil and tire pressure, then finally remembered to put my new tag stickers on. Heading out to the GTG at Maggie Valley in the morning, so ready for a road trip!
Title: Re: What did you do to or on your CVO today?
Post by: Chains on September 18, 2015, 09:19:06 PM
Got up and headed to Donallsonville Georgia to Seminole Shores Cemetery to put an arrangement my wife made on my friends grave site. Left there and headed south into Florida round trip 570 miles not a bad days ride.
Title: Re: What did you do to or on your CVO today?
Post by: RGlideKid on September 19, 2015, 03:13:14 PM
I changed out the old ugly horn bell and put a new one on!
See the review at:
http://www.cvoharley.com/smf/index.php?topic=104334.new#new
Title: Re: What did you do to or on your CVO today?
Post by: cudacurlee on September 19, 2015, 06:40:59 PM
enjoyed the sunshine on the off ramp to the 215 from the 15 in Vegas. Wires to the throttle melted in traffic. Very exciting to traverse tractor trailers full of garbage as the bike renders forward motion useless
Title: Re: What did you do to or on your CVO today?
Post by: East Coast on September 19, 2015, 10:07:31 PM
I changed out the old ugly horn bell and put a new one on!
See the review at:
http://www.cvoharley.com/smf/index.php?topic=104334.new#new

Nice! Had my eye for this post.   :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: RGlideKid on September 20, 2015, 04:42:03 PM
I installed the harness shown below.  It connects under the left side cover to a male connector just waiting for an accessory harness to be plugged in.  I used the loose wires shown on the one end to connect my radar detector to, and the plug at the same end is a bonus accessory plug. 
Works like a champ.
Title: Re: What did you do to or on your CVO today?
Post by: WestCoastRuss on September 20, 2015, 04:54:03 PM
On the road again!!  After surgery and 2 1/2 months of rehab on my right arm the brace goes away :huepfenjump3:

Title: Re: What did you do to or on your CVO today?
Post by: OBB on September 20, 2015, 06:26:50 PM
I installed the harness shown below.  It connects under the left side cover to a male connector just waiting for an accessory harness to be plugged in.  I used the loose wires shown on the one end to connect my radar detector to, and the plug at the same end is a bonus accessory plug. 
Works like a champ.
That looks a lot easier than the setup I did. I added aux switches on the left side of the fork lock and a different harness into that same plug under the cover. I have my driving lights and white LED accent lights on those switches. Are you telling me that aux plug behind that panel is already hot when the bike is turned on and I didn't need to add those switches?
Title: Re: What did you do to or on your CVO today?
Post by: RGlideKid on September 20, 2015, 07:22:28 PM
That looks a lot easier than the setup I did. I added aux switches on the left side of the fork lock and a different harness into that same plug under the cover. I have my driving lights and white LED accent lights on those switches. Are you telling me that aux plug behind that panel is already hot when the bike is turned on and I didn't need to add those switches?

Mike,
The short answer, I guess...is yes.  I was looking at the aux switches as well for my bike, thought I could use one for the radar detector and the other for some future thing. But then I found this harness and did the research and decided to try it instead.  Got it for around $24 delivered.
This harness has a 15A rating.  I had to trim the ends off 2 of the three leads, but that was a breeze.  You use the purple lead for hot rather than the red lead, as the red lead is hot all the time.
My only concern with this harness is that the PDF instructions said to hook this up to the spare plug under the left side cover.  The shop manual for our bike says the spare is a dark grey plug and is the the bottom of the two plugs under the cover, but this harness will not fit that plug as it is a 4-connector, nor are they even wired the same.  The top connector of the two, however, is wired exactly the same and has the same color and type connector, but the manual says that connector under the left side cover is a diagnostic connector. 
I did a trial hookup before putting anything together permanently using the "diagnostic connector on the bike, and it worked perfectly with no issues.  I haven't checked for DTC's yet, but it worked fine with no issues.  I can only assume that since the connector was the exact same type, and the wiring colors and quantities of wires were identical, and because the HD web site said this connector worked for our '15 RGU's, that I have done the right thing.  The other, darker grey connector, had a lot more wires leading to it, so I am left to assume that it's the diagnostic plug in and that the shop manual incorrectly labels the diagram.
PM me if you have any questions!
Title: Re: What did you do to or on your CVO today?
Post by: OBB on September 20, 2015, 08:04:22 PM
Mike,
The short answer, I guess...is yes.  I was looking at the aux switches as well for my bike, thought I could use one for the radar detector and the other for some future thing. But then I found this harness and did the research and decided to try it instead.  Got it for around $24 delivered.
This harness has a 15A rating.  I had to trim the ends off 2 of the three leads, but that was a breeze.  You use the purple lead for hot rather than the red lead, as the red lead is hot all the time.
My only concern with this harness is that the PDF instructions said to hook this up to the spare plug under the left side cover.  The shop manual for our bike says the spare is a dark grey plug and is the the bottom of the two plugs under the cover, but this harness will not fit that plug as it is a 4-connector, nor are they even wired the same.  The top connector of the two, however, is wired exactly the same and has the same color and type connector, but the manual says that connector under the left side cover is a diagnostic connector. 
I did a trial hookup before putting anything together permanently using the "diagnostic connector on the bike, and it worked perfectly with no issues.  I haven't checked for DTC's yet, but it worked fine with no issues.  I can only assume that since the connector was the exact same type, and the wiring colors and quantities of wires were identical, and because the HD web site said this connector worked for our '15 RGU's, that I have done the right thing.  The other, darker grey connector, had a lot more wires leading to it, so I am left to assume that it's the diagnostic plug in and that the shop manual incorrectly labels the diagram.
PM me if you have any questions!
I've got a thread on here about those plugs when I did my install. The pix in the manual is labeled wrong. Go figure.  ::)
Title: Re: What did you do to or on your CVO today?
Post by: RGlideKid on September 20, 2015, 08:51:27 PM
I've got a thread on here about those plugs when I did my install. The pix in the manual is labeled wrong. Go figure.  ::)

Whew!  That makes me feel better.  Thanks for that, Mike!
Title: Re: What did you do to or on your CVO today?
Post by: Kingspoke on September 20, 2015, 10:35:56 PM
I installed the harness shown below.  It connects under the left side cover to a male connector just waiting for an accessory harness to be plugged in.  I used the loose wires shown on the one end to connect my radar detector to, and the plug at the same end is a bonus accessory plug. 
Works like a champ.

Very creative! :drink:  Great Job! :2vrolijk_21:  I'd love to see how your Radar detector is mounted!  Thanks!
Title: Re: What did you do to or on your CVO today?
Post by: RGlideKid on September 21, 2015, 12:14:36 AM
Very creative! :drink:  Great Job! :2vrolijk_21:  I'd love to see how your Radar detector is mounted!  Thanks!

I didn't want to go with a remote detector, as I've heard that rain can kill a detector quicker than anything, plus I wanted to be able to use this detector in my other rides, so it needed to be removable.
The big problem for a Road Glide is the width of the windshield...it just is so wide that you need to get your detector out to the side of it, unless your windshield is very short and you can shoot over the top of it.  That and the fact that your detector will not pick up a laser being shot at you if your detector is behind a tinted windshield.  Mine is a medium smoke Freedom shield, which I was told would render picking up laser impossible.
My current setup is a RAM mount on the two control bolts to the clutch.  Then I have one of their ugly black 6" clamps topped off by a 2" x 4" RAM platform to which I mount the detector.  It gives me just enough reach to the left side to be able to peek around the windshield.
I don't know if I'll keep the RAM system or not, but until I find a better option (or better looking), I'll stick with this for now.
I thought about a fairing mount of some sort, but drilling into the fairing was just out of the question for me, so...
I'll post pictures of the setup later this week coming up.
Title: Re: What did you do to or on your CVO today?
Post by: Kingspoke on September 21, 2015, 12:42:28 AM
Good information, thanks!  I'll stay tuned! :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: WVHoop on September 21, 2015, 04:22:10 PM
Installed new floorboards & rode it!!
Title: Re: What did you do to or on your CVO today?
Post by: WVHoop on September 21, 2015, 04:23:24 PM
New brake pedal too!!
Title: Re: What did you do to or on your CVO today?
Post by: RGlideKid on September 22, 2015, 02:43:27 PM
Completed the install of my RAM mount system for the radar detector. 
See the post of this system in the RGU section.
Title: Re: What did you do to or on your CVO today?
Post by: Rooster on September 22, 2015, 05:35:50 PM
On the road again!!  After surgery and 2 1/2 months of rehab on my right arm the brace goes away :huepfenjump3:
Good to hear Russ. You look a little lighter in the pic. Hope you are healed. :drink:
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on September 22, 2015, 06:48:21 PM
Oh damn, we're doing it upside down again
This may help if you are using an "I" device to take the pictures - Why Your iPhone Photos Are Upside Down & How To Fix That (http://iphonephotographyschool.com/iphone-photos-upside-down/).

"You can prevent any rotation issues in the future by taking your iPhone photos and videos with the volume buttons pointing down."

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: King Glide on September 22, 2015, 07:07:29 PM
Installed front grills and license plate
Title: Re: What did you do to or on your CVO today?
Post by: King Glide on September 22, 2015, 07:08:44 PM
And the plate
Title: Re: What did you do to or on your CVO today?
Post by: Supershooter on September 22, 2015, 10:08:30 PM
Took the wife on her first ride on our new to us SESG.
Supershooter
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on October 01, 2015, 08:42:47 AM
And the plate

Who makes that plate frame?  Is it lighted for night time use?  How is it mounted?  I'm pretty sure you had to drill fender.

Looks good.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on October 01, 2015, 08:46:44 AM
Wednesday we road over to Bike Blues and BBQ, and road daily in perfect weather, then took two lane home Sunday and Monday.  Total of 1885 miles in great weather.  Putting the miles at 27,000 on my one year old CVO Road Glide Ultra.  Now it's been raining since Monday evening.  So I washed the CVO Road Glide.  Then I washed the CVO Road King.  Today since still raining I will wax one of them. 
Title: Re: What did you do to or on your CVO today?
Post by: Bav on October 01, 2015, 02:04:51 PM
Popped down to Abingdon and had a picnic by the River Thames in the sunshine.

(http://images.tapatalk-cdn.com/15/10/01/3add4e40ad57e6255056dd81e2041c5c.jpg)

(http://images.tapatalk-cdn.com/15/10/01/d522fa3bdf0b7bad8c0de190946f845f.jpg)


Sent from my iPad using Tapatalk
Title: What did you do to or on your CVO today?
Post by: Bav on October 03, 2015, 01:28:32 PM
Took part in the annual Ride to the Wall (RTTW) to remember those in the Armed Forces who have fallen in the line of duty. There were over 7000 bikes and approx 20,000 people who turned up this year to the National Memorial Arboretum in Staffordshire. A very moving day as always.

http://www.bbc.co.uk/news/uk-england-34433000


Sent from my iPad using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: GregKhougaz on October 08, 2015, 12:54:38 PM
Late September ride through Yosemite and the Sierras on the way to Tahoe, Reno and Street Vibrations.  Stopped at Glacier Point for this shot.
Title: Re: What did you do to or on your CVO today?
Post by: Boatman on October 08, 2015, 01:21:54 PM
Late September ride through Yosemite and the Sierras on the way to Tahoe, Reno and Street Vibrations.  Stopped at Glacier Point for this shot.

I know your not right now Greg!     :nixweiss:    :cherry:
Title: Re: What did you do to or on your CVO today?
Post by: GregKhougaz on October 08, 2015, 01:39:42 PM
I know your not right now Greg!     :nixweiss:    :cherry:

:nixweiss:    I am left-handed.    :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: jachd17 on October 08, 2015, 07:01:46 PM
Late September ride through Yosemite and the Sierras on the way to Tahoe, Reno and Street Vibrations.  Stopped at Glacier Point for this shot.

 My stomach turned over just looking at that pic :nervous: Too far down for me!
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on October 09, 2015, 10:46:58 AM
Late September ride through Yosemite and the Sierras on the way to Tahoe, Reno and Street Vibrations.  Stopped at Glacier Point for this shot.
and we have the winner of The Biggest 🎱🎱 contest‼️‼️
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on October 09, 2015, 10:54:36 AM
Late September ride through Yosemite and the Sierras on the way to Tahoe, Reno and Street Vibrations.  Stopped at Glacier Point for this shot.

That musta been one heck of a long selfie pole, Greg....... :huepfenlol2: :huepfenlol2: ;D

Yes sir, before that feller fell off the top of that-there rock, I heard him say "Hey y'all, watch this"..... ;D :bananarock:
Title: Re: What did you do to or on your CVO today?
Post by: GregKhougaz on October 09, 2015, 11:10:11 AM

Yes sir, before that feller fell off the top of that-there rock, I heard him say "Hey y'all, watch this"..... ;D :bananarock:

And on the way down you could hear him say, "So far so good!"   Remember, it's not the fall that kills you, it's the sudden stop at the end.    :nervous:    Sitting on that rock couldn't be any more dangerous than riding a motorcycle in city traffic.   :huepfenlol2:
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on October 09, 2015, 12:59:06 PM
Sitting on that rock couldn't be any more dangerous than riding a motorcycle in city traffic.   :huepfenlol2:

I will agree with you there, Greg......Nashville at rush hour... :thumbsdown: :smilie_daumenneg: :rolleyes4: :nervous:
Title: Re: What did you do to or on your CVO today?
Post by: Bromebe on October 09, 2015, 01:18:34 PM
Packed the bike last night for a ride with some friends up and thru the hill country tomorrow!

now I can go home and unpack the bike and put my gear.... GRRRRR... away  :'( :-[
because the wife's car broke this morning and working with numb nuts that can't tie their own shoe
now has me needing to be here at the office, again!

Grrrrr.!  :-[

yep, heard about the girl that fell 500 meters to her death off the cliff over looking the nords in Norway
maybe think of you and your toes hanging over Yosemite!
Title: Re: What did you do to or on your CVO today?
Post by: Kingspoke on October 09, 2015, 01:47:33 PM
I was getting a static buzz in my left tour pack speaker, so I figured I might as well upgrade the rear 5.25" speakers with the 6.75" Kicker KCS674's.  It's a nice upgrade over the Harley junk >:( boom speakers, but probably not a serious audiophile's choice ::).  Definitely a improvement in sound! :2vrolijk_21: I haven't had a chance to try them at highway speeds, yet.

You can see the magnet size difference between the Kickers and Harley's junk.  They fit easily into the rear speaker bucket, no adapter required (drilling new holes, is).  I don't like the Kicker grills as they can easily pop out and aren't held in by a retaining ring.
Title: Re: What did you do to or on your CVO today?
Post by: Para Bellum on October 11, 2015, 12:37:37 AM
About 95% there on the decision to buy-in to the 5 year ESP as the 2-year warranty on Blue lapsed back on Aug 7th.

Big chunk of change
You've probably read this thread http://www.cvoharley.com/smf/index.php?topic=104599.0;all (http://www.cvoharley.com/smf/index.php?topic=104599.0;all), or others like it, but just in case you haven't, the fine print in the ESP contract is important.
Title: Re: What did you do to or on your CVO today?
Post by: Bav on October 11, 2015, 12:34:19 PM
Went to a nearby airfield to see the last flight of Avro Vulcan XH558. It's the only one in the world still flying but has now been grounded by lack of funds. What an awesome sight and what a noise. It did two low passes and set off car alarms!!

(http://images.tapatalk-cdn.com/15/10/11/3e1bf4c3402f8364f0fa2f554ad5a4b0.jpg)

(http://images.tapatalk-cdn.com/15/10/11/7bfe887a9735a05bc42bf6333ab81cd9.jpg)

(http://images.tapatalk-cdn.com/15/10/11/2cfdfbca63ff716ec90f717ce289d03e.jpg)


Sent from my iPad using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on October 11, 2015, 12:51:02 PM

Went to a nearby airfield to see the last flight of Avro Vulcan XH558. It's the only one in the world still flying but has now been grounded by lack of funds. What an awesome sight and what a noise. It did two low passes and set off car alarms!!



That's cool.  I'd thought the last Vulcan flight happened about a year ago as remembered reading something in one of the AF rags about spares and funds running out then.  To this day still have vivid memories of the reporting early in the Falklands campaign when the Vulcans made their strike from Ascension and the little reported stories later of badly they fubar'd fuel flow calcs and nearly took a swim on the trip home.
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on October 11, 2015, 03:09:10 PM
Went to a nearby airfield to see the last flight of Avro Vulcan XH558. It's the only one in the world still flying but has now been grounded by lack of funds. What an awesome sight and what a noise. It did two low passes and set off car alarms!!

(http://images.tapatalk-cdn.com/15/10/11/3e1bf4c3402f8364f0fa2f554ad5a4b0.jpg)

(http://images.tapatalk-cdn.com/15/10/11/7bfe887a9735a05bc42bf6333ab81cd9.jpg)

(http://images.tapatalk-cdn.com/15/10/11/2cfdfbca63ff716ec90f717ce289d03e.jpg)


Sent from my iPad using Tapatalk
That is really awesome!
Title: Re: What did you do to or on your CVO today?
Post by: longlast on October 11, 2015, 05:27:02 PM
I'll bet you'd like to have those pipes on your ride  ;D :nervous:
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on October 11, 2015, 07:49:49 PM
I looked at my CVO as I walked past it about 100 times this weekend, filling the garage with moving boxes full of household stuff. The Closets are already full of packed boxes, as is the basement. Never realized how much stuff we accumulated - and we thought we had the place cleaned up pretty good.

 The movers show up 10/26 !!

The countdown begins......T-15days until we depart Connecticut for the last time as residents of that state.  I guess I'll always be a Da** Yankee to the locals, but look out Tennessee here we come  :orange:
Title: Re: What did you do to or on your CVO today?
Post by: TinSpinner on October 11, 2015, 09:05:38 PM
Today I washed my bike then went for a leisurely 100 or so mile ride and collected some fresh bugs. First time I've been able to ride since I got back from the Maggie Valley GTG due to the weather, it has rained here every weekend and off and on through the weeks since.
Title: Re: What did you do to or on your CVO today?
Post by: Chains on October 13, 2015, 05:09:44 PM
Rode to Mt. Cheha park highest point in Alabama. Got in around 150 miles beautiful day for a ride. Here's a photo on the way up the mountain.
Title: Re: What did you do to or on your CVO today?
Post by: Chains on October 13, 2015, 05:11:46 PM
Ride was great but sweets from Bonnie Rays are delicious.
Title: Re: What did you do to or on your CVO today?
Post by: ONE2BAJA on October 15, 2015, 08:36:58 PM
Took the scooter to the harley shop and they changed out my hydraulic clutch for the recall.   While it was there I had them put on heated grips. I must be getting old and circulation to the digits isn't is good.  Rode home in 50 degree air with just my half gloves.  Wow, I love them already!  It will make riding in Iowa this winter a lot more enjoyable.
Title: Re: What did you do to or on your CVO today?
Post by: tgent103 on October 16, 2015, 02:17:12 PM
Added License plate frame and backrest !!!
Title: Re: What did you do to or on your CVO today?
Post by: tgent103 on October 16, 2015, 02:19:29 PM
again
Title: Re: What did you do to or on your CVO today?
Post by: tgent103 on October 16, 2015, 02:21:49 PM
more
Title: Re: What did you do to or on your CVO today?
Post by: ngshop on October 16, 2015, 03:32:55 PM
Took a ride around the NC, TN and Ga mountains..... 1,218 miles. Yee Haw, it never gets old. Many great roads to ride.
Title: Re: What did you do to or on your CVO today?
Post by: 68 XLCH on October 16, 2015, 08:35:11 PM
Setup looks good, i've got the same back rest, hope you enjoy yours as i do mine.
Title: Re: What did you do to or on your CVO today?
Post by: mystic2494 on October 17, 2015, 07:04:59 PM
Uh, today was a good day.  The 120 R crate motor I ordered for my 2010 CVO street glide arrived!!!
Title: Re: What did you do to or on your CVO today?
Post by: windjammer on October 17, 2015, 07:42:38 PM
Installed my 2nd fullsac DX pipe and went to the dyno. 96 hp and 107 tq w/stock mufflers Bob at Razorback Performance did a great job on the tune, said to put my 2" fullsac's back on but I think they are too loud so I will live wit a little less. Frankly I cannot tell the difference in the saddle.
Title: Re: What did you do to or on your CVO today?
Post by: JCZ on October 18, 2015, 08:58:56 PM
Babe and I rode over to the Spring Valley Tailgate and BBQ contest.

Here's a shot of a couple of the Chargers cheerleaders warming up for the big loss today..... :P
Title: Re: What did you do to or on your CVO today?
Post by: Snakepit on October 18, 2015, 11:41:38 PM
Babe and I rode over to the Spring Valley Tailgate and BBQ contest.

Here's a shot of a couple of the Chargers cheerleaders warming up for the big loss today..... :P
Looks like you made out ok!
Title: Re: What did you do to or on your CVO today?
Post by: TNCarters on October 19, 2015, 09:52:41 AM
Did the HD Experienced Rider Skills Class yesterday on my RGU.  Others in the class were on Heritage Softails.  Think they may have had an advantage with wheel base and seat height.  Found the figure 8 a bit harder than I thought.  Never got down to the 20 foot box but did manage 22 feet.  More practice to come.  Had to laugh a bit the instructor took one of the Street 500's with the training engine guard and laid it on the guard and carved about a 10 foot diameter scrape in the pavement.

It was pushing 35 degrees when I left home in the morning and was glad for the full fairing and heated grips/seat.
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on October 19, 2015, 11:00:03 AM
Congratulations Ron.  It's a tough class but glad you enjoyed it.

As for the heated grips, I had an opportunity to try out the heated seat this morning coming into work.  It was 32 when I left the house and as this was the first time I've owned a bike with a heated seat, I thought what the heck.  VERY NICE INDEED!  The grips I've used already so I knew I liked them but the bun warmer in the seat....best thing since sliced bread.... ;D
Title: Re: What did you do to or on your CVO today?
Post by: JCZ on October 19, 2015, 12:10:15 PM
Looks like you made out ok!

I've had rougher days.  :P
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on October 19, 2015, 08:45:09 PM
Did the HD Experienced Rider Skills Class yesterday on my RGU.  Others in the class were on Heritage Softails.  Think they may have had an advantage with wheel base and seat height.  Found the figure 8 a bit harder than I thought.  Never got down to the 20 foot box but did manage 22 feet.  More practice to come.  Had to laugh a bit the instructor took one of the Street 500's with the training engine guard and laid it on the guard and carved about a 10 foot diameter scrape in the pavement.

It was pushing 35 degrees when I left home in the morning and was glad for the full fairing and heated grips/seat.
  Good Job

I have taken that class twice, once on my 09 SERG and once on my 12 SERG.  I took ride like a Pro on my 13 SERK.  When done, I could do a 20 foot diameter circle to the right and a 21 to the left on the King.

Can't now, out of practice, can still do a 22 on either bike the King or the SERGU.    22 foot box is great, means u turns on the road are easy
Title: Re: What did you do to or on your CVO today?
Post by: TNCarters on October 19, 2015, 08:57:31 PM
Ride like a pro has classes in north Alabama almost every weekend.  Maybe next spring after some more practice. Just don't want to lay my RGU down as its really top heavy with anything in tour pack.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on October 20, 2015, 08:57:28 PM
Ride like a pro has classes in north Alabama almost every weekend.  Maybe next spring after some more practice. Just don't want to lay my RGU down as its really top heavy with anything in tour pack.

If you talk with them you will find out, even if you drop your bike which most do not, you will not hurt it.

Talking with them they use protection on the engine guard and bag guards.  You are not going fast enough to go over farther than that.

I carried a towel with me, when I got to the class sight I took my bags off.  Then I had pre cut pipe insulation, the type you buy at home depot to keep pipes from freezing.  I had them pre made to fit my engine guars and rear bag supports as no bag guards. 

This was a big help, knowing if I dropped it nothing would be scratched.  I did not drop it.

I have practiced on my 15 SERGU, and you are right about top heavy.  Can't quite get it as tight as the king but 22 foot box is fine, once in a while I succeed in the 20 foot box. 

I have removed the rear bag guards on it as I do not like the looks and my wife wanted some on her 15 Road Glide special.
Title: Re: What did you do to or on your CVO today?
Post by: Cross threaded on October 22, 2015, 04:48:58 PM
I took my 15 SESG in for a new Chrome starter today… About 2 weeks ago, I brought my bike in for the 5000 mile service and the service manager said; Did you know the paint is flaking off of your starter? I had noticed that there was two small dime sized places on the starter that the paint had flaked off but, I guess I just didn't think the MOCO would do anything about it, I was wrong. I paid the difference to go with the chrome vs a new black starter and the Moco took care of the rest. $100 bucks never looked so good.

After looking at it and getting opinions from others, everyone that seen the paint flaking off of the starter thinks it's from when I had the chrome inner primary put on. Because the place where the paint was gone was right at the bolts.
Title: What did you do to or on your CVO today?
Post by: Bav on October 25, 2015, 02:45:36 PM
Did the Antwerp 500. 571 miles through the Belgium and Netherlands countryside. Started at 15:00 and finished at 09:30 the following morning. Very challenging as all they give you is a paper road book sheet and you have to follow it exactly to get your log book stamped at 14 checkpoints some of which are secret and not listed on the road book! Not easy in the dark in unfamiliar territory. Very tired now so it's an early night before heading back to the UK tomorrow with a very very dirty bike due to overnight rain!!

(http://images.tapatalk-cdn.com/15/10/25/66c89ac8d3313fd1f8fb882436cad825.jpg)

(http://images.tapatalk-cdn.com/15/10/25/af5fcf70126804a0cc1df2dae0ec93b4.jpg)

(http://images.tapatalk-cdn.com/15/10/25/996f45fe9469eac1122ef23cc7640cb9.jpg)

(http://images.tapatalk-cdn.com/15/10/25/5327a15d5cda2e63a10f9df49596e9b2.jpg)


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: brwk on October 27, 2015, 12:26:37 PM
New shoes.....25000 miles.  Front still had a little but the rear was gone.
Title: Re: What did you do to or on your CVO today?
Post by: dayne66 on October 27, 2015, 12:31:49 PM
So far today....dropped all the fluids.....gonna do a service and a wash starting in 2 minutes....and look at the Heat Demons that quit.
Title: Re: What did you do to or on your CVO today?
Post by: Boatman on October 27, 2015, 12:32:00 PM
New shoes.....25000 miles.  Front still had a little but the rear was gone.

That has to be a record for tire mileage.   :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on October 27, 2015, 12:33:45 PM
Today?  I did nothing!  It's still in the shop......
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on October 28, 2015, 12:12:38 AM
New shoes.....25000 miles.  Front still had a little but the rear was gone.
WOW
Title: Re: What did you do to or on your CVO today?
Post by: baddyna96 on October 28, 2015, 05:06:33 PM
Installed a complete Fullsac exhaust, DX header, 2" cores and the TTS tuner that was supplied with a custom map for my bike. Then a top to bottom cleaning.
Title: Re: What did you do to or on your CVO today?
Post by: MrSurly on October 29, 2015, 08:25:26 AM
New shoes.....25000 miles.  Front still had a little but the rear was gone.

Wait! Clarification needed... Does "shoes" mean Tires, or possibly Brake Pads?

Only one of those seems likely.
Title: Re: What did you do to or on your CVO today?
Post by: RayG on October 29, 2015, 10:51:56 AM
Maybe I'm wrong but I thought shoes were brake pads and sneakers were related to tires.  But hey what do I know. 
Title: Re: What did you do to or on your CVO today?
Post by: red ben59 on October 29, 2015, 07:07:13 PM
I can see getting that out of the pads ( I can't ride too hard, stop fast ), but no way are the DUNFLOPS GOING THAT FAR. Besides shoes have always meant brake pads ( old term brake shoes).  :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: Chains on October 30, 2015, 12:02:31 PM
Just put my Screamin eagle Logo on Tour Pack.  Painted the insert the color of the pinstripe on the bike for a little contrast.  May regret and wished I had went with the primary color or the deep burgundy, time will tell.
Title: Re: What did you do to or on your CVO today?
Post by: HUBBARD on October 30, 2015, 12:35:20 PM
Looks Great, Chains!  8)  Later--HUBBARD
Title: Re: What did you do to or on your CVO today?
Post by: MrSurly on October 30, 2015, 04:05:09 PM
Looks awesome...I'm wondering if I should put one on the Bushtec as well

you know... continuity etc
Title: Re: What did you do to or on your CVO today?
Post by: JCZ on October 30, 2015, 04:10:09 PM
Looks awesome...I'm wondering if I should put one on the Bushtec as well

you know... continuity etc

Only until you sell it to the wing rider.  :huepfenlol2:
Title: Re: What did you do to or on your CVO today?
Post by: Chains on October 30, 2015, 05:38:15 PM
Looks awesome...I'm wondering if I should put one on the Bushtec as well

you know... continuity etc

I can't say since everyone here knows I have had more Bushtec's than anyone should have.  Had I put the logo on each of them I would be out around $2K in logos.  :nervous:

Every time I think well this is the one another one catches my eye and I buy it.

If you are going to keep it and can get your hands on one I think it would look great on the back.
 
I have two CVO covers and have been toying with taking one of them and making it fit a Bushtec trailer.  I would have the logo on top.  My problem is I have had Turbo 2's, Quantum's and Roadstar's and each takes a different style cover. Also I would want to somehow get it to be waterproof as well. On top of that I really like the retro look of the Entourage. So until I settle in on a trailer no cover will be made.


Title: Dave Down
Post by: FLSTFI Dave on October 31, 2015, 09:24:41 AM
Thursday picked up my SERGU from having all the Hail damage fixed.  Looks great, then I rode it home the long way going over foothills parkway.

Yesterday I took the SERK our for a little 200 mile Fall colors ride, Little River road in Smoky Mountain National Park had very nice colors.

Hope to ride today, but looks like weatherman is wrong again.   Was suppose to be clear and 0% rain, very cloudy and now calling for rain. :( 
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on October 31, 2015, 01:22:42 PM
Was suppose to be clear and 0% rain, very cloudy and now calling for rain. :(

Ain't east tennessee fun... ;D
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on October 31, 2015, 05:04:59 PM
Nothing today, waiting on the rain to go away.  A ride tomorrow looks promising.
Title: Re: What did you do to or on your CVO today?
Post by: Road Dad on October 31, 2015, 09:59:23 PM
Why not ride in the rain?  I don't get that at all. Just dress for it.
Title: Re: What did you do to or on your CVO today?
Post by: JCZ on October 31, 2015, 10:53:37 PM


Another rough day here in San Diego.....I rode over to Fiesta Island this afternoon.  It's one of the few places left in California where you can actually drive on the beach, right down to the water and it's in the San Diego city limits.

(https://farm1.staticflickr.com/660/22668682371_b464b3c2ee_c.jpg)

(https://farm1.staticflickr.com/644/22644003642_468100ee7d_c.jpg)



(https://farm6.staticflickr.com/5782/22034787504_2a99887952_b.jpg)



The girls have the bon fire and b-b-q going while the guys are out on the bay on their wave runners...

(https://farm1.staticflickr.com/670/22657620695_fe921bf986_c.jpg)

Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on November 01, 2015, 12:44:57 AM
Inattentive motorist was cited for illegal left turn; here's hoping GEICO make a fair offer on the payout so we don't get into a stare-down

This is what's left of a 2013 CVO Road Glide after a inattentive motorist made an improper left turn into me last December on my way to work, I was travelling in the opposite direction from the final resting position of the bike.  I recovered every dime I paid for the bike plus the thousands in accessories and clothing.  No complaints about the GEICO claims process from me.   I'm insured with USAA/Progressive by the way.
Thats great to hear as I just changed my mc insurance to Geico last month. Still hoping I won't have to use it though
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on November 01, 2015, 09:30:47 AM
Why not ride in the rain?  I don't get that at all. Just dress for it.
I ride in the rain frequently.  I have left my home in the rain to go to Daytona, just over 600 miles and had it rain all the way.

However, like yesterday, I do not suit up to go run the curves in the rain with wet leaves on the road.

That said I did get out for a short 2 hour ride yesterday, just very light sprinkles while I was out, no rain gear.  some of the roads were pretty slick with leaves.

Title: Re: What did you do to or on your CVO today?
Post by: pete s. on November 01, 2015, 08:26:33 PM
Washed and waxed mine today.
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on November 01, 2015, 09:09:26 PM
Rode it.  The old SERG.  1st of November in Missouri and riding in jeans and a tshirt all afternoon til nearly dusk.  A good day.
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on November 01, 2015, 09:48:51 PM
Rode it.  The old SERG.  1st of November in Missouri and riding in jeans and a tshirt all afternoon til nearly dusk.  A good day.
Yes a beautiful day here today and the next few days.
Title: Re: What did you do to or on your CVO today?
Post by: JCZ on November 01, 2015, 10:19:09 PM
Rode to a beautiful little city about 7 miles north of San Diego, La Jolla.  An awsome day!  :bananarock:

Didn't have my Nikon today.....please excuse the cell phone pics.


(https://farm1.staticflickr.com/683/22680856862_f5ca3a1565_b.jpg)

(https://farm6.staticflickr.com/5824/22694401195_e19c15c5d0_b.jpg)

(https://farm1.staticflickr.com/659/22071626644_04a0034420_b.jpg)

(https://farm6.staticflickr.com/5662/22705573171_37cdf1f7c9_b.jpg)

(https://farm6.staticflickr.com/5640/22694404625_e8942a7692_b.jpg)



And.....San Diego being a world class destination.....always has a lot of foreign people.  Met these two lovely young ladies visiting all the way from Italy.  With heavy accents we stumbled through much conversation.  Great sense of humor.....when I asked one said "we're from Sicily and we both have lots of brothers and lots of fathers".  Told them I was clear on that.....I watched the Godfather.  :P   


(https://farm1.staticflickr.com/695/22506478980_69c497c77b_b.jpg)

(https://farm1.staticflickr.com/716/22071631104_f9d2dcfee4_b.jpg)

(https://farm1.staticflickr.com/578/22705577231_3b83282c25_b.jpg)

(https://farm1.staticflickr.com/746/22705580101_75ce0bde74_b.jpg)

(https://farm1.staticflickr.com/720/22680871492_93063a3f65_b.jpg)

(https://farm1.staticflickr.com/609/22680870862_3d7b1333fa_b.jpg)

(https://farm6.staticflickr.com/5688/22506487000_6559f6090e_b.jpg)


So for those of you that live in an area where it's already cold...possibly snow on the ground....bike already put away for the winter.....just know what we're taking you along with us....in thoughts. Welcome to sunny So Cal.  :bananarock:
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on November 02, 2015, 08:18:50 AM
Nice JCZ...

We sure do not have that weather, but no snow either.

Getting the bike ready today, leaving in the AM for Crystal River FL, hopefully they have that kind of weather!   8)  At least they will have good fresh seafood and raw oysters.

Title: Re: What did you do to or on your CVO today?
Post by: JCZ on November 02, 2015, 08:22:33 AM
Dave, be sure to take the camera and keep it around your neck.......and use it!  ;D

You get ready to take a serious ride west, let me know.  Be happy to show you around.  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: BigLew on November 02, 2015, 11:30:46 AM
Thanks for the pics JC. How's the back holding up? You ever own or ride a V-rod?

BigLew
Title: Re: What did you do to or on your CVO today?
Post by: longlast on November 02, 2015, 01:25:00 PM
Great photos thanks for sharing, beautiful place 8)
Title: Re: What did you do to or on your CVO today?
Post by: MadCVORG on November 03, 2015, 12:07:43 PM
Great photos! Looking at low cloud cover now.......hoping for a little break from this weather.
Title: Re: What did you do to or on your CVO today?
Post by: Chains on November 03, 2015, 12:09:50 PM
Great photos! Looking at low cloud cover now.......hoping for a little break from this weather.

Love the photos.  Still raining in Southside Alabama, I'm about an hour plus from you.
Title: Re: What did you do to or on your CVO today?
Post by: 610hog on November 03, 2015, 10:46:05 PM
Finished the detachable Tour Pack install.  :pineapple:
Title: What did you do to or on your CVO today?
Post by: MrSurly on November 04, 2015, 11:32:15 AM
Added FOBO TPMS tire pressure monitoring.

It displays the pressures on my iPhone. It seems pretty dang cool.
I do wish I could get rid of the default sport bike though

(http://images.tapatalk-cdn.com/15/11/04/8823cb7a0861758974edfe6208d60fcc.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on November 04, 2015, 08:52:46 PM
Added FOBO TPMS tire pressure monitoring.

It displays the pressures on my iPhone. It seems pretty dang cool.
I do wish I could get rid of the default sport bike though

(http://images.tapatalk-cdn.com/15/11/04/8823cb7a0861758974edfe6208d60fcc.jpg)
Sounds interesting, might have to look into the system.
Title: Re: What did you do to or on your CVO today?
Post by: MC16LTD on November 05, 2015, 06:31:09 PM
Called up Fullsac and ordered a DX header, 2" power cores and sleeves.  Now all I need is for my bike to get here to put them on when they arrive.
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on November 06, 2015, 01:57:21 PM
Highs in the 70's (may have even reached 80) today... so I took the day off and decided I would get a ride in (I know you all are shocked :shocked2:) only to find out my Battery Tender had chit the bed.... Light was still green showing everything was good to go, however when I took it off the tender and hit the start I got the low/dead battery "whir". So what I did on my CVO today was go buy another Battery Tender Plus and miss out on a great day in November to go riding. :bigcry:

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: nytryder on November 07, 2015, 08:11:05 PM
I took a ride on my bike after installing Ohlin #2 adjustables on the rear. What a friggin difference! I cannot believe the difference in the factory and aftermarket shocks performance wise. Not cheap at all but they really take the shock out of irregularities in the road at low and high speeds. Will soon be doing the Ohlin kit for the front asap.
Title: Re: What did you do to or on your CVO today?
Post by: King Glide on November 10, 2015, 02:10:24 PM
Took a ride along the Amite and Tickfaw rivers between Baton Rouge and New Orleans, LA.
Title: Re: What did you do to or on your CVO today?
Post by: King Glide on November 10, 2015, 02:12:39 PM
Tickfaw Marina
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on November 13, 2015, 04:56:00 PM
Spent a couple hours washing and waxing the bike.  The riding season may be coming to an end soon, snow is in the forecast, so that means the salt is coming soon.  Hopefully, will be able to carve out some time for a ride or two this weekend.
Title: Re: What did you do to or on your CVO today?
Post by: RayG on November 13, 2015, 06:55:37 PM
So you are happy with the Ohlin product.  How many miles did you ride?  How did it handle in the corners, potholes etc.  Money spent on the suspension is one of the best investments one can make.  When people talk about lowering their bike to look cool I just cringe.  Glad you are enjoying your new shocks 
Title: Re: What did you do to or on your CVO today?
Post by: Lever on November 13, 2015, 09:19:09 PM
Well  cozhair hd  Pickup my bike for a full detail
after she's home it's under the blanket with tender  on in heated garage  til spring. ... done riding
Title: Re: What did you do to or on your CVO today?
Post by: OBB on November 14, 2015, 05:22:37 AM
Well  cozhair hd  Pickup my bike for a full detail
after she's home it's under the blanket with tender  on in heated garage  til spring. ... done riding
Hate reading these post although I'm not far behind you. Looks like we have a week of 60* weather next week and after that it's a crap shoot.  I'll clean mine up in the garage over the course of the winter. I like to tear everything off I can and spend a few days on it.
Title: Re: What did you do to or on your CVO today?
Post by: DesertHOG on November 14, 2015, 07:19:13 PM
Took I-25 to Santa Fe today. Had lunch with the former Sales Manager from SFHD. Grab a couple of picture with my "flag" in a local Rally. One at a Starbucks in SF and the other at Iglesia San Jose (St Joseph's Church) in Cerrillos, NM on the way home down the Turquoise Trail, Hwy 14 Southbound. About 125 miles round trip. Turned 14k on my odometer. Only 1k to the next service. Looking forward to riding next weekend and hopefully into December. No garage blanket for me.

Simon
Title: Re: What did you do to or on your CVO today?
Post by: Jock on November 14, 2015, 08:48:25 PM
Went to the shop to check on the progress of repairs.

 :)
Title: Re: What did you do to or on your CVO today?
Post by: DesertHOG on November 15, 2015, 07:32:30 PM
Went to the shop to check on the progress of repairs.

 :)

Repairs? Do tell. Inquiring minds want to know.
Title: Re: What did you do to or on your CVO today?
Post by: Chains on November 20, 2015, 11:10:21 AM
Added a Kuryakyn passenger drink holder. Picked it up for under $20.00 no box but new. Need to find a deal on one for 1 1/4 bars to match now.  Do you guys that have them leave the basket on all the time or only install when you have a passenger.  Also anyone ever have the basket come loose? 
Title: Re: What did you do to or on your CVO today?
Post by: JoeVibe on November 20, 2015, 05:16:34 PM
Added a Kuryakyn passenger drink holder. Picked it up for under $20.00 no box but new. Need to find a deal on one for 1 1/4 bars to match now.  Do you guys that have them leave the basket on all the time or only install when you have a passenger.  Also anyone ever have the basket come loose?

I've had the passenger cup holder on my bike for about 2 years now. I've never taken it off and it's never loosened up. I had the handlebar mounted rig but didn't like the look so I got rid of it. When Janet's riding with me we share her drink and when I'm solo I can easily reach back and grab my drink.

Joe
Title: Re: What did you do to or on your CVO today?
Post by: Chains on November 20, 2015, 07:30:25 PM
I've had the passenger cup holder on my bike for about 2 years now. I've never taken it off and it's never loosened up. I had the handlebar mounted rig but didn't like the look so I got rid of it. When Janet's riding with me we share her drink and when I'm solo I can easily reach back and grab my drink.

Joe

Thanks Joe.  Gave it a 200 mile road test today riding the mountain brow in Alabama up to Georgia and skirted Tennessee, it never moved.  Kept my water in it and could easily reach it. May not add a front one after all.
Title: Re: What did you do to or on your CVO today?
Post by: Jock on November 24, 2015, 04:12:04 PM
Went to the shop to check on the progress of repairs.

 :)

Picked it up!

 :huepfenjump3:
Title: Re: What did you do to or on your CVO today?
Post by: Rooster on November 24, 2015, 04:14:36 PM
 :bananarock:
Picked it up!

 :huepfenjump3:
:apple: :carrot: :jalapeno: :cucumber: :orange: :mango: :bananarock: :pineapple: :pepper: :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Nicky Pass on November 24, 2015, 06:49:55 PM
I got it out one last ride a week and a half ago....then we got 10" of snow.

(http://i50.photobucket.com/albums/f340/NickyPass/7b5a9fc1878c11d0df42b9125c6b9fe8_zpsywlrjvhs.jpg)

It is now on my J&S Jack with the tender plugged in and the cover on 😨
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on November 26, 2015, 09:05:15 PM
We did something new today.. we went for ride this afternoon. No, that's not the new something...the fact that I was wearing a T-Shirt was the new something we did! Definitely never able to do that in November back north in CT  :P  after about a month we're finally starting to feel "settled in" at our new place in TN and since it's only the two of us for this holiday we took advantage of the warm weather and complete lack of traffic to go out for a few hours. 

Took part in one of our favorite activities, "I wonder were this road goes" for several hours exploring the area around the new home. Really nice ride through some rural areas with plenty of horses, cattle and even some goats being seen. Once we were ready to head back home it was time to consult the GPS for the route.
Title: Re: What did you do to or on your CVO today?
Post by: bigC on November 26, 2015, 09:22:14 PM
Wished it happy birthday. I've had it for 1 fun year :orange:
Title: Re: What did you do to or on your CVO today?
Post by: SBB on November 26, 2015, 09:29:52 PM
We did something new today.. we went for ride this afternoon. No, that's not the new something...the fact that I was wearing a T-Shirt was the new something we did! Definitely never able to do that in November back north in CT  :P  after about a month we're finally starting to feel "settled in" at our new place in TN and since it's only the two of us for this holiday we took advantage of the warm weather and complete lack of traffic to go out for a few hours. 

Took part in one of our favorite activities, "I wonder were this road goes" for several hours exploring the area around the new home. Really nice ride through some rural areas with plenty of horses, cattle and even some goats being seen. Once we were ready to head back home it was time to consult the GPS for the route.

Bruce

It is only going to get better and better.
Wait till spring, you will know all the good roads.

SBB

Title: Re: What did you do to or on your CVO today?
Post by: phato1 on November 26, 2015, 09:42:01 PM
Bruce

It is only going to get better and better.
Wait till spring, you will know all the good roads.

SBB

Paula wants me to tell ya I got me a new pickup truck!!  ----  it's the company truck  ::) , but she insists it's "mine"......

And just like we knew was going to be the case we're loving it here.

I've been studying paper maps and Google in an attempt to plan a few adventures when we have the time to dedicate a whole day to exploring.
 
Title: Re: What did you do to or on your CVO today?
Post by: markp1965 on November 26, 2015, 11:00:23 PM
added CFR pipes and OMG do they sound awesome,  no other pipe comes close and I know I've heard others say you lose torque with them but I didn't notice any drop whatsoever
Title: Re: What did you do to or on your CVO today?
Post by: Chains on November 27, 2015, 07:24:24 PM
Took Terri on a 75 mile ride after lunch. Beautiful 74 degree sunny day. Could have ridden a lot more but since she has had a back issue since the WVA GTG I think I will bring her back up to long rides at a slow pace. Don't want to break her again.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on November 27, 2015, 07:32:29 PM
Took Terri on a 75 mile ride after lunch. Beautiful 74 degree sunny day. Could have ridden a lot more but since she has had a back issue since the WVA GTG I think I will bring her back up to long rides at a slow pace. Don't want to break her again.
Glad to hear she's able to at least climb on it for short distances. Hope she's doing better.
Title: Re: What did you do to or on your CVO today?
Post by: TNCarters on November 28, 2015, 08:55:47 AM
Paula wants me to tell ya I got me a new pickup truck!!  ----  it's the company truck  ::) , but she insists it's "mine"......

And just like we knew was going to be the case we're loving it here.

I've been studying paper maps and Google in an attempt to plan a few adventures when we have the time to dedicate a whole day to exploring.
 

Bruce, A couple of our favorites is a route from Triune(hwy96 & Horton Hwy) down to Lynchburg then across 129 to Lynnville and up through Columbia back to Franklin.  Also From Loveless Café down Natchez Trace as far as you want to ride and back up to Leipers Fork and back to Franklin. Another is go down Natchez Trace to Alabama, then across to Muscle Shoals and back up through Lawrenceburg to Franklin.  Center Hill Lake also has some nice routes around it.
Title: Re: What did you do to or on your CVO today?
Post by: Chains on November 28, 2015, 09:31:44 AM
Glad to hear she's able to at least climb on it for short distances. Hope she's doing better.

Much better Mike thanks.  Now of course she goes to physical therapy 2 to 3 times a week and has been since the GTG.  I didn't realize how messed up her back was.  They have put her on a regiment of stretches and exercises that help a lot. As long as she stays disciplined and does them I see a future with her being able to ride with me again.
Title: Re: What did you do to or on your CVO today?
Post by: TN on November 28, 2015, 02:23:25 PM
Rode it.   :apple:

Title: Re: What did you do to or on your CVO today?
Post by: OBB on November 28, 2015, 05:39:44 PM
Much better Mike thanks.  Now of course she goes to physical therapy 2 to 3 times a week and has been since the GTG.  I didn't realize how messed up her back was.  They have put her on a regiment of stretches and exercises that help a lot. As long as she stays disciplined and does them I see a future with her being able to ride with me again.
I've finally given in and went to see a surgeon about my back. A few PM's with JCZ got some ideas and we're going to try a shot or two in my back to see if we can ease the pain a little. Only thing I can do that doesn't cause discomfort or a numbness in my left index finger is ride the bike. Too bad I can't do that for a living. I can't even sleep more than 4 hours without waking up in pain. Tried 3 different mattresses in the last 3 years so I don't think that's it. Spinal Stinosis (sic) is what the vet says it is.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on November 28, 2015, 05:40:51 PM
Rode it.   :apple:


Rub it in pal....   :-[



Great pix though  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: dayne66 on November 28, 2015, 06:19:55 PM
Glanced at the battery tenders....all good......and sighed.
Title: Re: What did you do to or on your CVO today?
Post by: martys on November 28, 2015, 06:21:20 PM
Glanced at the battery tenders....all good......and sighed.
Same thing I did  :( :( :(  :drink:


Marty
Title: Re: What did you do to or on your CVO today?
Post by: FLY-DOG on November 28, 2015, 06:48:10 PM
72 degrees here today, took the CVO out for a nice ride over to Atlanta Motor Speedway, down to Griffin, over to Newnan, then over to the Hartsfield-Jackson International Airport then back to Stockbridge, nice little ride.  Surprised I didn't see more bikes out as nice as the weather was.
Title: Re: What did you do to or on your CVO today?
Post by: Para Bellum on November 28, 2015, 07:51:07 PM
Spinal Stinosis (sic) is what the vet says it is.
What species are you?   ;D
Title: Re: What did you do to or on your CVO today?
Post by: OBB on November 28, 2015, 07:52:06 PM
What species are you?   ;D
Heinz 57 mutt.
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on November 30, 2015, 08:00:59 PM
Bruce, A couple of our favorites is a route from Triune(hwy96 & Horton Hwy) down to Lynchburg then across 129 to Lynnville and up through Columbia back to Franklin.  Also From Loveless Café down Natchez Trace as far as you want to ride and back up to Leipers Fork and back to Franklin. Another is go down Natchez Trace to Alabama, then across to Muscle Shoals and back up through Lawrenceburg to Franklin.  Center Hill Lake also has some nice routes around it.
Thanks! I'll have to try one of those routes the next time we get out. Hoping for favorable weather on the weekends that I'm home. New job is keeping me busy during the week, that's for sure.
Title: Re: What did you do to or on your CVO today?
Post by: TNCarters on December 02, 2015, 01:14:31 PM
Put the heated gear connector on my RGU the other day.  Hope to make use of it as winter gets to TN.  Also decided I was getting a bit more wind with the Freedom Shield in 14" than I preferred and ordered a 16" for winter and hopefully some trips next year.  The 14 was significantly better than stock but wind was hitting the top of my half helment and getting a fair amount of wind noise in my ears.  I know this can be overcome with volume, ear plugs or full face helment with speakers but I just like cruising with the half helment and stock speakers at normal volumes.
Title: Re: What did you do to or on your CVO today?
Post by: MC16LTD on December 07, 2015, 09:46:54 AM
Well, it wasn't today...it was yesterday but is still early.  Did the Toys for Tots run in Columbia SC.  Very worthy cause with a whole lot of friends.  For anyone in midlands SC area, the Dorn VA run is on the 13th in Columbia.  Should be well over 2500+ riders this year weather will be a warm 77 degrees.
Title: Re: What did you do to or on your CVO today?
Post by: Chains on December 09, 2015, 04:47:36 PM
First thing I followed Cat Eyes advice on tips to fix my heated grips.  He was spot on, RH grip unplugged under cap therefore the circuit was not complete and they would not work.  Used a needle nose plugged it back in and went for a 70 mile ride. They worked flawlessly. Actually they get so warm I may be able to heat my lunch when on the road.

Thanks again Jim (Cat Eye) :2vrolijk_21
Title: Re: What did you do to or on your CVO today?
Post by: 2soaper on December 09, 2015, 06:34:04 PM
ordered Dynamic Ringz Bullet LED Turn signals for my wife for xmas she probably won't like em....
Title: Re: What did you do to or on your CVO today?
Post by: 4tigers on December 09, 2015, 09:54:49 PM
ordered Dynamic Ringz Bullet LED Turn signals for my wife for xmas she probably won't like em....

I just installed those on my bike Sunday. They are awesome, very bright.
Title: Re: What did you do to or on your CVO today?
Post by: LC110 on December 10, 2015, 03:21:13 PM
49 deg. here today.
So I went for a little ride, got a lot of  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: helimd on December 10, 2015, 08:47:35 PM
60-70 degrees for the last 5 days here in Oklahoma City.  Phenomenal riding weather.  Ridden to work every day this week.  End of the shift I head in a direction opposite of home, put on 50 miles or so, and head on to the hacienda.  Love my "new" 2010 Softail Convertible.
Title: Re: What did you do to or on your CVO today?
Post by: Streetglide1 on December 11, 2015, 09:28:31 AM
Took the harley to the dealer to get the 25k service done and a Stage 3 screamin eagle kit installed, 259e cams, compression piston and lots of other extras.

whoo hooo!!
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on December 11, 2015, 11:50:03 PM
taking it in tomorrow to finally get the front Ohlins put in. I have been running the HD premium front cartridges for 38000 miles with the rear Ohlins (Howards #6's). I have wanted to do the front Ohlin's since they came out but just couldn't justify it since I wasn't sure there would really be that big of a difference. My front is starting to "chatter" a bit and after all those miles it is time to service them so I figure now is the time. Hoping after they are done I wish I had done them a long time ago.
Title: Re: What did you do to or on your CVO today?
Post by: Chains on December 14, 2015, 06:47:36 PM
Got my ignition switch cover in bought black anodized. Set it on and did not like the black look. Got out the oven cleaner soaked the cover and 15 minutes later ready for polishing.

Here's the black one
Title: Re: What did you do to or on your CVO today?
Post by: Chains on December 14, 2015, 06:50:25 PM
Here it is after removing anodize and rough polish. Will take dremel and felt wheel around cross. Should look ok when done
Title: Re: What did you do to or on your CVO today?
Post by: michaelokielee@yahoo.com on December 14, 2015, 09:20:16 PM
Finally installed the Custom Dynamics LED Front Bullet turn signals and Load Equalizer!! :orange:
Title: Re: What did you do to or on your CVO today?
Post by: jachd17 on December 15, 2015, 07:26:22 PM
Rode it! :bananarock:
Title: Re: What did you do to or on your CVO today?
Post by: OBB on December 15, 2015, 08:23:29 PM
On Sunday it got a good cleaning and put away for the winter  :-\

Title: Re: What did you do to or on your CVO today?
Post by: FXD_TG on December 15, 2015, 09:06:44 PM
New-to-Use / Replacement '13  FLHRSE5 got its Fullsac pipes on last Wednesday night and spent a little time on the Dyno getting fine tuned today.

(https://ridingtwoup.files.wordpress.com/2015/12/20151209_2123141.jpg?w=800)

HP was down a tick from our original '13 FLHRSE5 with 17k miles on the clock when it went in for the Dyno tune (96.2 to 94.5) and torque was up a tick (110.8 to 111.2). The replacement bike only has 2,400 miles.

Today's Dyno run on Blue II
(https://ridingtwoup.files.wordpress.com/2015/12/img20151215_20531244.jpg?w=1000)


Prior Dyno results from August on Blue I

(https://ridingtwoup.files.wordpress.com/2015/08/dscn1296-1.jpg?w=1000)
Title: Re: What did you do to or on your CVO today?
Post by: cvoMD on December 17, 2015, 08:35:49 PM

This came in for mine today

(http://images.tapatalk-cdn.com/15/12/17/43d60ae9922ca537fca46397aa12e230.jpg)

Sent from my SM-G925P using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: JCZ on December 17, 2015, 08:39:58 PM
First thought......wow, what will it take to clean that?  :P
Title: Re: What did you do to or on your CVO today?
Post by: cvoMD on December 17, 2015, 08:40:50 PM
Not sure yet but i am very nervous to find out. I am not looking forward to it

Sent from my SM-G925P using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: cvoMD on December 17, 2015, 08:42:18 PM
Heres what it looks like at the moment

(http://images.tapatalk-cdn.com/15/12/17/67d699a0569e01d5ad41dbdec836702a.jpg)

Sent from my SM-G925P using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: cvoMD on December 17, 2015, 08:43:36 PM
And another one close up

(http://images.tapatalk-cdn.com/15/12/17/d649ff05a2679c071ca9754ab8898fb6.jpg)

Sent from my SM-G925P using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on December 17, 2015, 09:14:10 PM
Looks awesome!
Title: Re: What did you do to or on your CVO today?
Post by: 68 XLCH on December 18, 2015, 10:25:38 AM
cvoMD


I said i'll get the CVO it already has all the cool stuff on it, but....

You are taking it to a the next level, very nice.


Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on December 19, 2015, 12:10:39 AM
taking it in tomorrow to finally get the front Ohlins put in. I have been running the HD premium front cartridges for 38000 miles with the rear Ohlins (Howards #6's). I have wanted to do the front Ohlin's since they came out but just couldn't justify it since I wasn't sure there would really be that big of a difference. My front is starting to "chatter" a bit and after all those miles it is time to service them so I figure now is the time. Hoping after they are done I wish I had done them a long time ago.
Got the bike back today and got to try out the front Ohlins, truly great! smooth as silk and yes, i wish I had done them when they first came out.. IMHO worth the money
Title: Re: What did you do to or on your CVO today?
Post by: martys on December 24, 2015, 07:13:51 PM
Well for the first time ever I went for a ride On Christmas Eve  :pepper: :pepper: :pepper: There is usually snow on the ground or too much salt on the roads but this year's mild weather gave me a chance to ride this late in the year.  I stopped at the same spot that I trailer-ed my Triple Red to, along the shore of Lake Erie last winter to do a photo shoot for a calendar  where we are the December page :) What a difference a year makes  :2vrolijk_21: Merry Christmas to all my CVO Friends


Marty
Title: Re: What did you do to or on your CVO today?
Post by: martys on December 24, 2015, 07:14:50 PM
This is the picture they used for the calendar
Title: Re: What did you do to or on your CVO today?
Post by: martys on December 24, 2015, 07:15:34 PM
The calendar
Title: Re: What did you do to or on your CVO today?
Post by: JCZ on December 24, 2015, 07:22:54 PM
And the picture from today?  :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: knothead on December 24, 2015, 08:45:43 PM
For all the guys in Texas, I love buc ee more than Santa tonight..
Title: Re: What did you do to or on your CVO today?
Post by: martys on December 24, 2015, 09:44:25 PM
And the picture from today?  :nixweiss:
The one by the "non frozen" lake is the picture from today JC  :)
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on December 24, 2015, 11:49:08 PM
Well for the first time ever I went for a ride On Christmas Eve  epper: epper: epper: There is usually snow on the ground or too much salt on the roads but this year's mild weather gave me a chance to ride this late in the year.  I stopped at the same spot that I trailer-ed my Triple Red to, along the shore of Lake Erie last winter to do a photo shoot for a calendar  where we are the December page :) What a difference a year makes  :2vrolijk_21: Merry Christmas to all my CVO Friends


Marty
We went out for a few hours today and like you it was the first time going for a ride on Christmas Eve. But unlike you we moved to a more southerly location this fall - we're settled into our new home in Tennessee - and I was wearing a T-shirt during our ride due to the milder than normal temeratures.
Explored another group of new to us roads and I didn't even get lost this time!
Title: Re: What did you do to or on your CVO today?
Post by: GregKhougaz on December 25, 2015, 04:02:12 PM
Well for the first time ever I went for a ride On Christmas Eve  epper: epper: epper: There is usually snow on the ground or too much salt on the roads but this year's mild weather gave me a chance to ride this late in the year.  I stopped at the same spot that I trailer-ed my Triple Red to, along the shore of Lake Erie last winter to do a photo shoot for a calendar  where we are the December page :) What a difference a year makes  :2vrolijk_21: Merry Christmas to all my CVO Friends


Marty
Very nice Marty!   Got in a short Christmas Day ride.  It's a "frigid" 50* F. in Southern California.

(https://uploads.tapatalk-cdn.com/20151225/b8f62279e75cfbe4cb26635aaf00f907.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: windjammer on December 25, 2015, 08:26:46 PM
85 today in Sunny Florida. Installed Wards fans today after a test ride I think they are awesome!
Title: Re: What did you do to or on your CVO today?
Post by: Craigisdad on December 25, 2015, 10:07:57 PM
Hard to imagine riding on Christmas Day in northern Indiana, but that's what we did today. By the time all the family stuff was over it was 4:30 before we hit the road, and since it was 45 degrees and only an hour of daylight left it was a short ride.  Wasn't the longest ride we ever took but may be the only time we will get to ride on Christmas Day, and looking ahead at the weather I'm pretty sure today was it till spring.   For all you lucky people that get to keep riding, have fun and be safe!!
Title: Re: What did you do to or on your CVO today?
Post by: Chains on December 25, 2015, 10:27:58 PM
Walked out in the garage and looked at it. 76 today with 6 inches of rain.   Still raining now, backyard looks like a pond.
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on December 25, 2015, 10:39:53 PM
Same here. No riding and it was 75 all day. Rain all day, too. This has been the warmest and wettest Christmas I can ever remember.
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on December 26, 2015, 10:38:06 AM
here in western IOWA we got 7 inches of snow on xmas eve...so mine was on the kick stand too  :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: Billy on December 26, 2015, 01:26:13 PM
35 degrees with no snow and most of the salt off the roads :orange: . so we rode around Lake Geneva WI and back Home Lots of sun shine and heated gear made the ride just like summer . Billy  :orange: :orange:
Title: Re: What did you do to or on your CVO today?
Post by: Nicky Pass on December 26, 2015, 06:24:09 PM
35 degrees with no snow and most of the salt off the roads :orange: . so we rode around Lake Geneva WI and back Home Lots of sun shine and heated gear made the ride just like summer . Billy  :orange: :orange:

Im not to far from you.....it's was to yucky/drizzly/foggy to ride!
Title: Re: What did you do to or on your CVO today?
Post by: SBB on December 26, 2015, 07:39:39 PM


Dec 26 2015 and the weather was great!
It's hard to argue with 75* so I got out the Road Glide for a short 150 miles ride.

SBB
Title: Re: What did you do to or on your CVO today?
Post by: longlast on December 27, 2015, 03:15:46 AM
Same over here 16c XMas day  and rain
Title: Re: What did you do to or on your CVO today?
Post by: Grizzly on December 28, 2015, 03:13:33 PM
A couple of friends paid us a visit on a sunny Christmas day with temps approaching 60°f

Title: Re: What did you do to or on your CVO today?
Post by: Chains on January 06, 2016, 03:21:13 PM
Added a Kuryakyn led taillight. Had one on my previous bike and ran across this one new for less than $30.00. Couldn't pass it up.

Ordered a set of Mellow Crushers while I was at it. Should have them sometime next week.
Title: Re: What did you do to or on your CVO today?
Post by: HUBBARD on January 08, 2016, 01:02:12 PM
Had Jody York, at Tilley's, look for some HP in Ol' Maybelle..........couldn't find any.   8)  Later--HUBBARD
Title: Re: What did you do to or on your CVO today?
Post by: HUBBARD on January 08, 2016, 01:03:55 PM
Still couldn't find any HP........... 8)  Later--HUBBARD
Title: Re: What did you do to or on your CVO today?
Post by: HUBBARD on January 08, 2016, 01:07:12 PM
Gutted..........Transplant in process.... 8)  Later--HUBBARD
Title: Re: What did you do to or on your CVO today?
Post by: 110tHunDer on January 08, 2016, 05:59:43 PM
Uh oh.  Looks like mine did 3 years go this time!
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on January 08, 2016, 06:22:20 PM
Whatcha doin Hub? Changing spark plugs?
Title: Re: What did you do to or on your CVO today?
Post by: HUBBARD on January 08, 2016, 08:27:05 PM
Whatcha doin Hub? Changing spark plugs?

Naw....OCD,,,,,,,,,just wanted to make sure the Frame ain't dirty.   :huepfenlol2: :huepfenlol2: :huepfenlol2: Later--HUBBARD 
Title: Re: What did you do to or on your CVO today?
Post by: hdbrad03 on January 08, 2016, 09:04:24 PM
Whatcha doin Hub? Changing spark plugs?

The "Quest for Unbalanced Begins"!  :pepper: :pepper: :pepper:


 :bananarock: :bananarock:
     
   Brad
Title: Re: What did you do to or on your CVO today?
Post by: Jock on January 08, 2016, 09:13:56 PM
Whatcha doin Hub? Changing spark plugs?

(http://i.imgur.com/szcopCp.gif)
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on January 08, 2016, 11:03:03 PM
Naw....OCD,,,,,,,,,just wanted to make sure the Frame ain't dirty.   :huepfenlol2: :huepfenlol2: :huepfenlol2: Later--HUBBARD

I think I saw some dust on the flywheels, rods, pistons, heads and cams too. LOL

If Brother Otis was still with us, Master Yorks phone would be doing a "China Syndrome" imitation right now with him trying to find out what you are doing??? Then he would tell me he was gonna turbo the Vrod.

Guess I'm gonna have to go buy a bottle of Octane boost.LOL
Title: Re: What did you do to or on your CVO today?
Post by: HUBBARD on January 08, 2016, 11:14:31 PM
I think I saw some dust on the flywheels, rods, pistons, heads and cams too. LOL

If Brother Otis was still with us, Master Yorks phone would be doing a "China Syndrome" imitation right now with him trying to find out what you are doing??? Then he would tell me he was gonna turbo the Vrod.

Guess I'm gonna have to go buy a bottle of Octane boost.LOL

Ain't that the truth!!?  I sure do miss him....he made me laugh....a lot!!!!  Good memories....Later--HUBBARD
Title: Re: What did you do to or on your CVO today?
Post by: SneakyPete on January 09, 2016, 05:06:16 AM
Carl,

Is that the 110 "boat anchor" you are selling that can't beat Shrader's 103? :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: HUBBARD on January 09, 2016, 06:58:31 AM
Pete,

Are you high this mornin'?  :huepfenlol2: You and SHRADER are drinkin' your own kool-aid.   8)  Later--HUBBARD
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on January 09, 2016, 08:16:34 AM
Pete,

Are you high this mornin'?  :huepfenlol2: You and SHRADER are drinkin' your own kool-aid.   8)  Later--HUBBARD

I been building a Race Indian. Right side tank is full of nitrous bottles. Just gotta figure out how to convert a hand shift and foot clutch to air so I can speed shift, and stuff more gears in the 3 speed case. How's that for Kool Aid??
Title: Re: What did you do to or on your CVO today?
Post by: donald p on January 09, 2016, 02:12:26 PM
Pingel shifter has what you are looking for, located in Wis.
 Also one is on craigslist for $600.
Go to w6jnh-5392982083@sale craigslist.org
Title: Re: What did you do to or on your CVO today?
Post by: Hnhcvo on January 09, 2016, 02:40:08 PM
Got bored while waiting for parts and my rake kit so decided to black candy my chrome stock taillight and turn signals... In Canada our CVO still have a fender (http://images.tapatalk-cdn.com/16/01/09/9901e182fb85f6945d70ba70acdeee03.jpg)brake light and our signals come in orange


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: catahoula58 on January 10, 2016, 12:14:32 PM
Added a set of Factory47 14 INCH MALO BARS to my 2009 FLTRSE3! 
Title: Re: What did you do to or on your CVO today?
Post by: catahoula58 on January 10, 2016, 12:15:49 PM
Picture 2
Title: Re: What did you do to or on your CVO today?
Post by: catahoula58 on January 10, 2016, 12:16:25 PM
Picture 3
Title: Re: What did you do to or on your CVO today?
Post by: catahoula58 on January 10, 2016, 12:17:05 PM
Picture 4
Title: Re: What did you do to or on your CVO today?
Post by: catahoula58 on January 10, 2016, 12:18:13 PM
Picture 5; Had Ft. Worth Harley Bleed the Brakes flash the ABS and Bleed the Clutch.  Even look FAST on the back of the delivery truck!  LOL!
Title: Re: What did you do to or on your CVO today?
Post by: JCZ on January 10, 2016, 12:36:41 PM
Took my road dog Angel for a ride....





Title: Re: What did you do to or on your CVO today?
Post by: backroad Mike on January 10, 2016, 06:01:12 PM
Tore my engine down to find where the metal pieces came from. Found out the ears on the spring clip for the rear cam broke off on the front side of cam plate taking out the oil pump.  It's flush out time, then decide rebuild or what other things to upgrade since it's in pieces.

Title: Re: What did you do to or on your CVO today?
Post by: backroad Mike on January 10, 2016, 06:02:44 PM
No turning back now.

Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on January 10, 2016, 06:06:06 PM
Tore my engine down to find where the metal pieces came from. Found out the ears on the spring clip for the rear cam broke off on the front side of cam plate taking out the oil pump.  It's flush out time, then decide rebuild or what other things to upgrade since it's in pieces.
(http://www.cvoharley.com/smf/index.php?action=dlattach;topic=89705.0;attach=288255;image)
No turning back now.
(http://www.cvoharley.com/smf/index.php?action=dlattach;topic=89705.0;attach=288257;image)
Damn... that sucks!!! :bigcry: Good luck on whatever you decide... it is all torn down now... good time to do a little something, something. :2vrolijk_21:

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: Chains on January 11, 2016, 11:08:26 PM
Installed Amber LEDs in front turn signals.
Title: Re: What did you do to or on your CVO today?
Post by: Chains on January 11, 2016, 11:10:22 PM
From the front.
Title: Re: What did you do to or on your CVO today?
Post by: BigLew on January 12, 2016, 09:49:28 AM
Took my road dog Angel for a ride....
Nice pic JC!

BigLew
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on January 12, 2016, 11:12:00 AM
Installed Amber LEDs in front turn signals.

I really like the look of those, Jim.  Nice addition
Title: Re: What did you do to or on your CVO today?
Post by: Hnhcvo on January 12, 2016, 02:39:16 PM
Well the carbon skunk is starting .... Giving the FLTRXSE a little attitude changing all the lower black areas to gold/black carbon weave. Just have to black candy them to give it some depth and dull the gold a hair (https://uploads.tapatalk-cdn.com/20160112/0a87ac1b89b931a79dc9d0154b345367.jpg)(https://uploads.tapatalk-cdn.com/20160112/495321db588abf98b07784cac8ce4705.jpg)


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: OBB on January 12, 2016, 08:45:04 PM
Well the carbon skunk is starting .... Giving the FLTRXSE a little attitude changing all the lower black areas to gold/black carbon weave. Just have to black candy them to give it some depth and dull the gold a hair (https://uploads.tapatalk-cdn.com/20160112/0a87ac1b89b931a79dc9d0154b345367.jpg)(https://uploads.tapatalk-cdn.com/20160112/495321db588abf98b07784cac8ce4705.jpg)


Sent from my iPhone using Tapatalk
Can't wait to see that finished up.
Title: Re: What did you do to or on your CVO today?
Post by: Para Bellum on January 13, 2016, 03:10:39 AM
Took off and cleaned up the oil cooler adapter, hoses, and oil cooler today.  Have a small oil leak at the adapter.  Might be at the hose fittings; still TBD.
Title: Re: What did you do to or on your CVO today?
Post by: Rooster on January 13, 2016, 06:17:34 PM
Took my road dog Angel for a ride....
Great pic of the two of you. :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Chains on January 14, 2016, 04:29:45 PM
Swapped out my current mufflers for a set of Kuryakyn Mellow Crushers. Sound is deeper than the mufflers I removed, swapped out to get mufflers with tips. Considered removing my 2 inch Fullsac inserts from my current mufflers but seemed like a bunch of work plus I would have to have bought mufflers with tips anyway this way I got a new set with mega tips. Got in close to 50 miles today 60 degrees and sunny.
Title: Re: What did you do to or on your CVO today?
Post by: Chains on January 14, 2016, 04:42:32 PM
Side shot
Title: Re: What did you do to or on your CVO today?
Post by: longlast on January 15, 2016, 05:06:55 PM
                Looks real nice Chains :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: 2k on January 16, 2016, 06:58:58 PM
Swapped out my current mufflers for a set of Kuryakyn Mellow Crushers. Sound is deeper than the mufflers I removed, swapped out to get mufflers with tips. Considered removing my 2 inch Fullsac inserts from my current mufflers but seemed like a bunch of work plus I would have to have bought mufflers with tips anyway this way I got a new set with mega tips. Got in close to 50 miles today 60 degrees and sunny.
Love the pipes, Jim......Can't believe you went with the Clemson tourpak!!
Title: Re: What did you do to or on your CVO today?
Post by: Chains on January 16, 2016, 09:58:26 PM
Love the pipes, Jim......Can't believe you went with the Clemson tourpak!!

Well I did it out of pity. I'm just a nice guy.  :huepfenlol2:  Did you notice Clemson was behind.
Title: Re: What did you do to or on your CVO today?
Post by: 2k on January 17, 2016, 08:40:09 AM
Well I did it out of pity. I'm just a nice guy.  :huepfenlol2:  Did you notice Clemson was behind.
Dang great answer, I'm gonna quit trying to pizz-u-off. Will prob change my mind next before Sept but for now its ROLL TIDE
Title: Re: What did you do to or on your CVO today?
Post by: Chains on January 20, 2016, 10:30:04 PM
Installed red LEDs in place of the smoked turn signals. Tomorrow my controller should arrive that will equalize the lights to the system and add pulsation to the brake lights. Next project is to add turn signals to tour pack lights.
Title: Re: What did you do to or on your CVO today?
Post by: DesertHOG on January 24, 2016, 12:03:34 PM
Took a 260 mi round trip for lunch at the Owl Cafe in San Antonia, NM with some of my IBA friends.
Title: Re: What did you do to or on your CVO today?
Post by: Supershooter on January 24, 2016, 09:35:52 PM
Installed some floor boards purchased from a forum member, moved the passenger pegs to the crash bar. One step closer, now all we need is a wash  job and warm weather.
Supershooter
Title: Re: What did you do to or on your CVO today?
Post by: TNCarters on January 28, 2016, 10:24:28 AM
Made a few minor additions during the snow break.  EZ Brake slotted pedal, Heated gear fixed plug mounted on air deflector under tank and lastly a set of HD Daymaker LED fog lamps mounted on lower guards w/panel switch.  Still need to adjust aim.  Think I want them just left/right of main headlight and just barely down about even with low beam.  Looks like we're supposed to be 60's here Saturday so may get to try some of this out, except the heated gear :).
Title: Re: What did you do to or on your CVO today?
Post by: FXD_TG on January 29, 2016, 09:59:04 AM
In anticipation of warmer temps and getting Miss Debbie out on Blue II for a couple rides on Sat & Sun, I left the BMW BCR at home and took Blue II to work yesterday just to get the cobwebs off since she's been sitting since Dec '13 with just a weekly engine run.  It felt really good to be back on the RK vs. the sportbike, if only for the sheer joy of variety.

However, even though she's been on the Battery Tender I had to remind myself the bike still has the OEM battery installed at the factory way back in June 2012. With that in mind and knowing how modern batteries seem to give you very little warning before they crap-out, I'm now in the market for an OEM-spec 66010-97C battery at a non-OEM $170 price tag.  I thought about putting in a 'better' aftermarket battery but my awesome service advisor Kelly at HD of Atlanta suggested sticking with the OEM model, given I have an ESP. 

Sound advise and quite frankly, I'm impressed that the stock 66010-97C battery on a barely ridden bike (remembering we bought Blue II in Nov with 2,500 miles to replace our totaled CVORK) lasted nearly four years.  The 66010-97C in Blue I was also going strong at 3.5 years w/18,000 miles.  So, not too worried about getting short-changed with the OEM battery @ $135.  The OEM battery in my '11 Wide Glide crapped-out almost 3-years to the day it was made.
Title: Re: What did you do to or on your CVO today?
Post by: Scott7d on January 29, 2016, 06:15:51 PM
It hit 40º here in Indiana today. Took a ride around the outskirts of town, stopped at "The Tap" for a couple brews and went home. Supposed to be 55º tomorrow. Gonna ride more to get the fuel stabilizer out of the tank and get ready for my upgrades/dyno tune on Sunday!
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on January 31, 2016, 08:44:14 AM
Went for a very short ride on the CVO King yesterday, high 50's low 60's.  Was nice to get out.

Also put the back seat and sissy bar on the King last night.  Wife is going to ride with me today on a club run.  She had knee surgery so she can't ride her own for a couple months.  Very rare for her to ride bitch... as in less than once a year.
Title: Re: What did you do to or on your CVO today?
Post by: Chains on January 31, 2016, 06:28:12 PM
Finalized the installation of run turn brake for tour pack and added a brake flasher. I think I wil like the extra light from the lower turn signals working as running and brake lights. Should be much safer when pulling the Bushtec to have turn signals on the tour pack and trailer.
Title: Re: What did you do to or on your CVO today?
Post by: Yellow09SERG on January 31, 2016, 07:43:15 PM
Got to ride it!!!! Yahoo
Title: Re: What did you do to or on your CVO today?
Post by: bigC on January 31, 2016, 08:18:02 PM
Washed and put away after a 100+ mile ride yesterday. Makes the 3rd or 4th time this winter it's been put away for the winter.
Title: Re: What did you do to or on your CVO today?
Post by: Yellow09SERG on January 31, 2016, 08:44:35 PM
Washed and put away after a 100+ mile ride yesterday. Makes the 3rd or 4th time this winter it's been put away for the winter.

Hopefully you will get the chance to wash her and put her away for the winter anther 4 or 5 times..... That should be putting us all close to spring by then
Title: What did you do to or on your CVO today?
Post by: Hnhcvo on February 02, 2016, 02:49:54 PM
Getting there, side covers finished carbon dipped and  black candied. Bags are off to finish up candy and clearing  today, just waiting for my 26" wheel and kewl metal front end to get here than I can install the wheel new lowers that I also had dipped  13" single rotor PM caliper front air ride and roll the carbon skunk down the road :) (http://uploads.tapatalk-cdn.com/20160202/4c0f6d924fc06211d0deba54918f4186.jpg)


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Road Dad on February 03, 2016, 09:15:54 PM
Rode around 40 miles then dropped of at dealer for some engine surgery
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on February 04, 2016, 07:27:44 AM
Plan on taking the king our for a nice ride today.  Looks to be about 34 when I leave the house.  Should see a high of 47.  Nice an sunny.
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on February 04, 2016, 08:19:13 AM
Plan on taking the king our for a nice ride today.  Looks to be about 34 when I leave the house.  Should see a high of 47.  Nice an sunny.

I thought about ya while riding in this morning, Dave, and figured you might get out in this wonderful East TN weather today.... ;D
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on February 06, 2016, 08:06:26 AM
Friday I rode over to Smoky Mountain HD to have the 30K service done on the 15 SERGU.  It was a nice 24 degrees when I left the house to ride over.  But bike is serviced and ready to ride!
Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on February 06, 2016, 10:03:09 AM
Met a friend at the dealership that was getting his bike serviced and decided to have a rattling noise checked out that is coming from the engine. Ended up having to leave the bike. They found metal filings in the oil. Hopefully I will have more information the beginning of the week. Hated to leave the bike but happy I didn't get "they all do that".  Guess I'll have to ride the Hot Rod (aka. Skunk) around for a bit.
Title: Re: What did you do to or on your CVO today?
Post by: RoadDawg on February 07, 2016, 09:44:14 AM
I took a short, 20 mile ride to test my new 117 Pro Race Kit. Can't believe the difference in power! It's so much more responsive. Great fun.  ;D
Title: Re: What did you do to or on your CVO today?
Post by: Lars on February 07, 2016, 11:52:41 AM
Hey cvosjoe,
Sounds like it may be time for a 117 upgrade?
Title: Re: What did you do to or on your CVO today?
Post by: RoadDawg on February 07, 2016, 12:37:00 PM
Hey cvosjoe,
Sounds like it may be time for a 117 upgrade?

Yeah, its' a gun ride. Here are my results
Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on February 07, 2016, 01:38:57 PM
Hey cvosjoe,
Sounds like it may be time for a 117 upgrade?
Been thinking about it but not for the 15 FLTRUSE because it's my year or two trade bike. I would like to bump up the Skunk. It already makes 124HP and 129TQ. Figure if I bump it up to a 117 it should produce low 130s for HP and at least 140TQ. I'm waiting until someone manufactures an 11 to 1 piston that will fit the new HD 117 jugs.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on February 07, 2016, 02:29:42 PM
Like Joe, I have been looking hard at the Jugs and pistons for my CVO King, mine has similar numbers to Joe.

I too want pistons with more compression for the set up. 
Title: Re: What did you do to or on your CVO today?
Post by: Lever on February 07, 2016, 03:09:54 PM
X2
Title: Re: What did you do to or on your CVO today?
Post by: Supershooter on February 07, 2016, 10:40:43 PM
Went to the dealership to start the processes of transforming this bike into my own, I really hate how expensive this could get.
Supershooter
Title: Re: What did you do to or on your CVO today?
Post by: gpopvet on February 08, 2016, 07:33:03 PM
Just added the 117 kit and Baker 7 speed.
Title: Re: What did you do to or on your CVO today?
Post by: Lever on February 08, 2016, 09:17:24 PM
Tell me more about the 7 speed transmission
Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on February 09, 2016, 01:25:21 PM


Met a friend at the dealership that was getting his bike serviced and decided to have a rattling noise checked out that is coming from the engine. Ended up having to leave the bike. They found metal filings in the oil. Hopefully I will have more information the beginning of the week. Hated to leave the bike but happy I didn't get "they all do that".  Guess I'll have to ride the Hot Rod (aka. Skunk) around for a bit.

Just got a call from the dealership that some needle bearings came out of the lifter and got into the oil pump and oil filter. Guess I'll be without a bike for a few weeks but I'm getting a new motor under warranty.
Title: Re: What did you do to or on your CVO today?
Post by: JCZ on February 09, 2016, 01:39:04 PM
Being in the mid 80s for the past week.....we've been riding.  Supposed to be 89F today, inland (more than a couple miles from the ocean).  We'll keep riding as long as this holds out.....where'd El Nino go?  :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: TNCarters on February 09, 2016, 03:50:57 PM
cvosjoe, just to know for sure was the issue on your 2015?  How many miles?  Have not read of as many issues with the SE lifters but still unproven for long term use.  Curious because I have the same bike and was trying to make it through warranty before I start changing out suspect parts.  I know Dave puts a lot of miles on his bikes but I'm probably only doing 12k a year.  Mine was purchased last May 2015.
Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on February 09, 2016, 04:32:21 PM


cvosjoe, just to know for sure was the issue on your 2015?  How many miles?  Have not read of as many issues with the SE lifters but still unproven for long term use.  Curious because I have the same bike and was trying to make it through warranty before I start changing out suspect parts.  I know Dave puts a lot of miles on his bikes but I'm probably only doing 12k a year.  Mine was purchased last May 2015.

Yes this is on my 2015. Mileage is 34k. Oddly enough the motor on my 2011 FLTRUSE was replaced because of a lifter and inner cam bearing failure at 31k.
Title: Re: What did you do to or on your CVO today?
Post by: wrayzor on February 09, 2016, 04:38:30 PM
Cleaned it and gave it a waxing. Had to remove the scuffs from where the rear passenger seat sits on the rear fender.
(http://i64.tinypic.com/1hnrs.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: TNCarters on February 09, 2016, 04:45:24 PM
Thanks, heard that a lot on the older 110's before HD went to the newer lifters.  Sounds like they are still not up to aftermarket but may make it through warranty for most riders.  Going to try and get over your way once the weather warms a bit.  Have a daughter in West Knoxville I need to visit and explore some roads in the area when she's at work.
Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on February 09, 2016, 04:53:58 PM


Thanks, heard that a lot on the older 110's before HD went to the newer lifters.  Sounds like they are still not up to aftermarket but may make it through warranty for most riders.  Going to try and get over your way once the weather warms a bit.  Have a daughter in West Knoxville I need to visit and explore some roads in the area when she's at work.

Send David or I a PM when you head this way and hopefully we can get together to do some riding.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on February 09, 2016, 08:46:02 PM
Joe is only the second 14 and newer CVO I have witnessed with lifter issues, the other was a 14 Limited CVO last summer I road out to CA, OR and WA with.

Guess I will be listening hard on mine, as I'm at 31K
Title: Re: What did you do to or on your CVO today?
Post by: cvoMD on February 09, 2016, 09:17:12 PM
JW Speaker 8790 installed today


(http://uploads.tapatalk-cdn.com/20160210/0a5ea4dae52fd07f70254649c7db6db9.jpg)

(http://uploads.tapatalk-cdn.com/20160210/3db171c42adacedb26b5c7582542a363.jpg)

Sent from my SM-G925P using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: cvoMD on February 09, 2016, 09:22:24 PM
https://vimeo.com/154806506 (https://vimeo.com/154806506)

Sent from my SM-G925P using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: MrSurly on February 09, 2016, 09:24:42 PM
That looks pretty awesome. Curious to know how well it works in the twisties!


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: cvoMD on February 09, 2016, 09:42:33 PM
https://vimeo.com/154807790 (https://vimeo.com/154807790)

Sent from my SM-G925P using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: Road Dad on February 09, 2016, 10:02:38 PM
Finally went ahead and ordered a Russell day-long seat!  Looks like April delivery.
Title: Re: What did you do to or on your CVO today?
Post by: Hnhcvo on February 11, 2016, 03:02:12 PM
Got some goodies back from paint today, think they look pretty good with the original fairing (http://uploads.tapatalk-cdn.com/20160211/17929aa503f51dae72147d6bae0f4072.jpg)


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Supershooter on February 11, 2016, 06:29:11 PM
Loaded it on a trailer and sent it to the dealer for winter upgrades.
Supershooter
Title: Re: What did you do to or on your CVO today?
Post by: Spiderman on February 11, 2016, 06:40:18 PM
JW Speaker 8790 installed today


(http://uploads.tapatalk-cdn.com/20160210/0a5ea4dae52fd07f70254649c7db6db9.jpg)

(http://uploads.tapatalk-cdn.com/20160210/3db171c42adacedb26b5c7582542a363.jpg)

Sent from my SM-G925P using Tapatalk


Woah, don't shine this on Richard Dreyfus's house, he'll freak

B B
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on February 12, 2016, 08:04:44 AM
I was going to ride in this morning but this came into east Tennessee
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on February 12, 2016, 08:06:21 AM
However, this feller won't let a little white stuff get between riding and a Starbucks.... ;D

I spoke to him while getting my coffee and as I expected, when he started out this morning, there was no snow (as it was when I left the house) so this was a bit of a surprise for us today.  He laughed when he looked out at his bike.  I don't know him but I've passed him many times coming into work on cold mornings so he's a all year long rider.....just wasn't expecting to ride this morning in the snow.... :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Chains on February 12, 2016, 10:07:50 AM
Wow Haird we are going to be in the 60's today.
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on February 12, 2016, 10:35:09 AM
Yea, Jim, I talked to mom last night and Autaugaville had 70's yesterday, for today and then 40's for the high temps Sat. and Sun.  The snow today was expected, just not this much for the valley. 

....and before I get feedback from all y'all nawtherners who are used to feet of snow, we ain't and all us good ol boys (and girls) are a'slippin and a'slidin all over the place.... ;D  :huepfenlol2: :bananarock:
Title: Re: What did you do to or on your CVO today?
Post by: longlast on February 12, 2016, 11:09:27 AM
Not a fun time of year for some of you over there Howard riding wise. Over here we haven't as much as a flake one little morning frost that's it.

Went for a ride yesterday, weather man said 8c but it felt more like 10/12c blue sky and worm sun.

Hope it doesn't stay long or get worse for ya.
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on February 12, 2016, 11:18:17 AM
JW Speaker 8790 installed today

(http://uploads.tapatalk-cdn.com/20160210/0a5ea4dae52fd07f70254649c7db6db9.jpg)


That is one, cool light fixture.  Reminds me of....

Title: Re: What did you do to or on your CVO today?
Post by: MrSurly on February 12, 2016, 11:29:50 AM
https://vimeo.com/154807790 (https://vimeo.com/154807790)

I'm hoping you'll post a video soon of how well it lights the road as you ride the twisties...
Title: Re: What did you do to or on your CVO today?
Post by: JCZ on February 12, 2016, 11:44:43 AM
However, this feller won't let a little white stuff get between riding and a Starbucks.... ;D

I spoke to him while getting my coffee and as I expected, when he started out this morning, there was no snow (as it was when I left the house) so this was a bit of a surprise for us today.  He laughed when he looked out at his bike.  I don't know him but I've passed him many times coming into work on cold mornings so he's a all year long rider.....just wasn't expecting to ride this morning in the snow.... :2vrolijk_21:

That doesn't look good.  :nervous: 

It's been 90F in El Cajon (San Diego) three days this week.  Forecasted for the same today.  8)
Title: Re: What did you do to or on your CVO today?
Post by: porthole on February 12, 2016, 12:15:05 PM
That doesn't look good.  :nervous: 

It's been 90F in El Cajon (San Diego) three days this week.  Forecasted for the same today.  8)

Tomorrow we are forecast for 0-2 with a windchill of -15 to -20, and I get to work  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on February 12, 2016, 12:18:36 PM
Tomorrow we are forecast for 0-2 with a windchill of -15 to -20, and I get to work  :2vrolijk_21:
Can remember working in weather like that, have a working fire, and being the Tillerman on an open cab rig... By the time you got finished fighting the fire, got back to the station your turnout gear was frozen stiff, and would stand up on its own. :(

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: porthole on February 12, 2016, 12:36:12 PM
A truckie works on a truck, a super truckie drives a tiller  :2vrolijk_21:
And Mikey was calling you a hose head on the other thread  :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on February 12, 2016, 01:00:59 PM
A truckie works on a truck, a super truckie drives a tiller  :2vrolijk_21:
And Mikey was calling you a hose head on the other thread  :nixweiss:
Yep, I saw that.. I've been on an Engine (Hosehead), Truck (Truckie), and Prevention (Code Enforcement... "Go back to your books" as Dawg put it)... get the ribbing about/from all those that are on one of the others... sometimes you feel like engaging in the "ribbing/debate", sometimes you don't... this morning I wasn't feeling it. :-\

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: OBB on February 12, 2016, 07:30:42 PM
Tomorrow we are forecast for 0-2 with a windchill of -15 to -20, and I get to work  :2vrolijk_21:
Was out working in it today, will be out working in it tomorrow. Just a nice little shot from a ladder about 24' up....

(http://i275.photobucket.com/albums/jj306/ohiobellboy/IMG_0069_zpsoy05uhtn.jpg) (http://s275.photobucket.com/user/ohiobellboy/media/IMG_0069_zpsoy05uhtn.jpg.html)



And as far as what I did to my CVO today. Not a damn thing. It's tucked away for the winter.  :-\
Title: Re: What did you do to or on your CVO today?
Post by: gadgetz on February 12, 2016, 11:45:50 PM
Was out working in it today, will be out working in it tomorrow. Just a nice little shot from a ladder about 24' up....

(http://i275.photobucket.com/albums/jj306/ohiobellboy/IMG_0069_zpsoy05uhtn.jpg) (http://s275.photobucket.com/user/ohiobellboy/media/IMG_0069_zpsoy05uhtn.jpg.html)



And as far as what I did to my CVO today. Not a damn thing. It's tucked away for the winter.  :-\




Now that's what I call a rats nest of twisted pair wiring. I'd of had my arse chewed for wiring in a CO like that during my Telephony days, lol. Bless your little heart.



Title: Re: What did you do to or on your CVO today?
Post by: phato1 on February 13, 2016, 11:20:50 AM



Now that's what I call a rats nest of twisted pair wiring. I'd of had my arse chewed for wiring in a CO like that during my Telephony days, lol. Bless your little heart.
I saw worse than that in a CO when I worked for the phone company. That's quite neat for being up hanging off a pole.
Title: Re: What did you do to or on your CVO today?
Post by: Miss Susan on February 13, 2016, 12:25:30 PM
I feel for you Porthole, it's 8 here now in southern WV (feels like -11).  Shrader and I will be happy when it moves your way.

And, Chains just keep rubbing it in.

Miss Susan
Title: Re: What did you do to or on your CVO today?
Post by: mkevns on February 13, 2016, 09:32:36 PM
2.25" Fullsacs installed. WOW it sounds like a Harley now!!!    I'd already put a tuner and got rid of the cat before.
Title: Re: What did you do to or on your CVO today?
Post by: Chains on February 13, 2016, 10:39:28 PM
I feel for you Porthole, it's 8 here now in southern WV (feels like -11).  Shrader and I will be happy when it moves your way.

And, Chains just keep rubbing it in.

Miss Susan

It's cold here now. High of 40 today. We're headed to the smokies Monday for 4 days rented a Chalet on a creek should be a good time. Too cold to ride but I don't care.

Hope you guys stay warm.
Title: Re: What did you do to or on your CVO today?
Post by: MrSurly on February 14, 2016, 09:59:47 AM
Gonna be 72* today

:whistling:


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Hnhcvo on February 14, 2016, 12:31:36 PM
Getting there striping is almost done on the carbon skunk (http://uploads.tapatalk-cdn.com/20160214/102c47d1049286b2d8c908d3853c9b2b.jpg)


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on February 14, 2016, 12:45:57 PM
Getting there striping is almost done on the carbon skunk (http://uploads.tapatalk-cdn.com/20160214/102c47d1049286b2d8c908d3853c9b2b.jpg)


Sent from my iPhone using Tapatalk
can't wait to see the finished product! looking amazing..
Title: Re: What did you do to or on your CVO today?
Post by: Hnhcvo on February 14, 2016, 12:47:35 PM

can't wait to see the finished product! looking amazing..
Thanks!! Me to hopefully completed around the first week of March.


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: kjobe on February 14, 2016, 01:00:02 PM
The fxstsse3 now has a Baker Attidute adjuster, good stuff
Title: Re: What did you do to or on your CVO today?
Post by: johnsachs on February 14, 2016, 06:32:15 PM
Tomorrow we are forecast for 0-2 with a windchill of -15 to -20, and I get to work  :2vrolijk_21:
High 60's today.... perfect temp. for a structure fire.
John
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on February 14, 2016, 07:58:28 PM
High 60's today.... perfect temp. for a structure fire.
John

60s sound like good riding weather, hope to fit a ride in when I make it to Ft. Myers later this week.
Title: Re: What did you do to or on your CVO today?
Post by: Yellow09SERG on February 14, 2016, 09:02:37 PM
Old girl got her oils changes and ready for the next 5000. If the wea6does what they claim we may get a start on that next weekend.
Title: Re: What did you do to or on your CVO today?
Post by: Chains on February 14, 2016, 11:55:59 PM
60s sound like good riding weather, hope to fit a ride in when I make it to Ft. Myers later this week.

I have a bunch of friends that spend the winter at Gulf Waters RV Park off Pine Ridge.  Will be heading down in a few weeks to look at house.

Enjoy your trip
Title: Re: What did you do to or on your CVO today?
Post by: JCZ on February 15, 2016, 10:24:56 AM
With temps in the 80s and 90s, Andy, Ernie, Alan, Miguel and I went for a ride Sat.
Title: Re: What did you do to or on your CVO today?
Post by: Break shot on February 18, 2016, 08:28:45 PM
Well today I got mine inspected tags tomorrow


Breakshot
Title: Re: What did you do to or on your CVO today?
Post by: MrSurly on February 19, 2016, 04:45:27 PM
I finally ordered the Bandit clutch today
http://www.banditmachineworks.com/pdfs/sportsmanSCIIhandout203RN.pdf (http://www.banditmachineworks.com/pdfs/sportsmanSCIIhandout203RN.pdf)
Title: Re: What did you do to or on your CVO today?
Post by: TN on February 19, 2016, 05:39:25 PM
I rode the bitch   :drink:
Title: Re: What did you do to or on your CVO today?
Post by: Jock on February 19, 2016, 05:50:32 PM
I rode the bitch   :drink:

(https://s-media-cache-ak0.pinimg.com/564x/62/d9/4c/62d94c3f25a8487337080394e65392be.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: Hnhcvo on February 19, 2016, 07:53:57 PM
Got a little progress shot on the back of my bags (http://uploads.tapatalk-cdn.com/20160220/b63c9f35526156b20aee0a8ca895f146.jpg)


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Lever on February 19, 2016, 08:06:12 PM
Looks great

Sent from my SCH-I535 using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: Hnhcvo on February 19, 2016, 08:13:55 PM

Looks great

Sent from my SCH-I535 using Tapatalk
Thanks man!


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Alex_McB on February 19, 2016, 09:18:37 PM
Installed a Screamin Eagle Extreme Billet Ventilator Air Cleaner Kit.

Title: Re: What did you do to or on your CVO today?
Post by: Hnhcvo on February 20, 2016, 04:21:50 PM
Progress of the 26 color matched to the skunk (http://uploads.tapatalk-cdn.com/20160220/e6b1b416b78a0cc1d1bac2e2f238e542.jpg)


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on February 21, 2016, 01:19:52 PM
Did not do anything on my bike yesterday, but was able to rent a Street Glide Special at 6 Bends and take a 400+ mile ride to Key Largo and back.

It was great to get out.
Title: Re: What did you do to or on your CVO today?
Post by: Hnhcvo on February 21, 2016, 09:47:38 PM
(http://uploads.tapatalk-cdn.com/20160222/9af032beeb7ab77030b40069f0a08a7f.jpg)all done color matched to the CVO skunk assembly starts next week so pumped


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on February 21, 2016, 10:13:46 PM
keep us up to date with pics on the progress of the build. Looks like it going to really be something special!
Title: Re: What did you do to or on your CVO today?
Post by: Hnhcvo on February 21, 2016, 10:45:29 PM

keep us up to date with pics on the progress of the build. Looks like it going to really be something special!
thank you. I'm pretty pumped. Going to try and start a thread on the build so I'm clogging this thread but not sure how ... Newbie lol


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: RoadDawg on February 22, 2016, 06:12:55 AM
Did a 100 mile run. Throttle response is immediate in every gear with my new SE117 drop-in kit installed. Temps in the upper 50s but not bad.
Title: Re: What did you do to or on your CVO today?
Post by: rafreche on February 22, 2016, 09:59:23 AM

Installed 8 inches Yaffe Monkey bagger bars on FLHTCUSE8 2013. I was able to use all the stock cables.  The toughest part is to make sure that all the pins are OK in the connectors.  Luckily my best friend did all that carefull work.  Took about 7 hours overall and about 6 beers  :drink: 

Now I just hope the snow will melt ASAP...

Ray

Quebec City
Title: Re: What did you do to or on your CVO today?
Post by: MrSurly on February 22, 2016, 11:23:42 PM
I have been fretting about which way to go on the compensator (BDL/Primo/SE) finally placed the order for the 42200064A new style SE kit.


Sent from my iPad using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: RoadDawg on February 23, 2016, 09:48:38 AM
Did a 30 mile run for lunch and back. Stopped at the HD dealership and talked to some friends. Mid 60s so not so bad for weather.
Title: Re: What did you do to or on your CVO today?
Post by: Billy on February 23, 2016, 05:15:25 PM
Mid 60's would be heaven in Chicago Billy
Title: Re: What did you do to or on your CVO today?
Post by: jachd17 on February 23, 2016, 05:34:47 PM
I have been fretting about which way to go on the compensator (BDL/Primo/SE) finally placed the order for the 42200064A new style SE kit.


Sent from my iPad using Tapatalk
I just had the new style SE installed in mine. Now if the spring would arrive.....
Title: Re: What did you do to or on your CVO today?
Post by: 262 CVO 16 on February 23, 2016, 07:15:38 PM
Mid 60's would be heaven in Chicago Billy

You Ain't Kidding!   :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: TN on February 23, 2016, 07:53:14 PM
I rode down to Savannah Indian and checked them out. I did circle the Harley shop.  :drink:

only got mid 70's so I wore a light jacket


TN
Title: Re: What did you do to or on your CVO today?
Post by: RoadMonkey on February 24, 2016, 04:23:16 PM
Did a 30 mile run for lunch and back. Stopped at the HD dealership and talked to some friends. Mid 60s so not so bad for weather.
:2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: OBB on February 24, 2016, 05:08:16 PM
I rode down to Savannah Indian and checked them out. I did circle the Harley shop.  :drink:

only got mid 70's so I wore a light jacket


TN
Thanks pal. I was out working with multiple layers and hand warmers in my gloves  :-\
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on February 25, 2016, 02:26:33 PM
I rode down to Savannah Indian and checked them out. I did circle the Harley shop.  :drink:

only got mid 70's so I wore a light jacket


TN

Yeah Phil Rub IT IN!!!

Seriously though. You ought to ride one of them Indians if you haven't already.
Title: Re: What did you do to or on your CVO today?
Post by: ONE2BAJA on February 25, 2016, 08:30:14 PM
Ex-Harley buddy bought one and loves it!  I personally thinks he needs scalped!  Might be a few better options but just can't ever owning one!
Title: Re: What did you do to or on your CVO today?
Post by: RoadDawg on February 27, 2016, 04:15:53 PM
Did a hundred mile run. Temps in the low 50s.  Nice and sunny. Stopped by the dealership for the tent sale. Didn't buy anything but some nice stuff for sale at a discount.
Title: Re: What did you do to or on your CVO today?
Post by: Lever on February 27, 2016, 04:20:26 PM
Weather is nice ... however still a lot of salt residue on the roads surface
Need some rain to clean off the roads surface
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on February 27, 2016, 06:23:34 PM
finally a very nice day here in the mid west...got me a lill 180 mile ride in with a couple of friends, thats all i did to it  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: porthole on February 27, 2016, 06:27:13 PM
No riding or work.
But I did do a mileage comparison with some good friends in Kitty Hawk.
All 3 SEEGs are within 300 miles of each other.
Title: Re: What did you do to or on your CVO today?
Post by: TN on February 27, 2016, 07:59:36 PM
Yeah Phil Rub IT IN!!!

Seriously though. You ought to ride one of them Indians if you haven't already.

I got one better, I'm trying to join the Savannah Indian Team, as in a job.   :drink: :drink:


TN

don't think it's gonna happen though
Title: Re: What did you do to or on your CVO today?
Post by: Supershooter on February 27, 2016, 11:03:39 PM
Ordered a Fullsac DX pipe and TTS for the steed, when will the spending stop....
Supershooter
Title: Re: What did you do to or on your CVO today?
Post by: MrSurly on February 28, 2016, 03:00:11 AM
Installed a Bandit Sportsman Clutch and the 064A compensator kit. Then the oldest grandkid and I rode for a couple of hours.
Wonderful day!


Sent from my iPad using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: OBB on February 28, 2016, 06:43:33 AM
I got one better, I'm trying to join the Savannah Indian Team, as in a job.   :drink: :drink:


TN

don't think it's gonna happen though
As a poster child for a banner? "Here's why people trade their Harleys in here,,,, the grips suck!"
Title: Re: What did you do to or on your CVO today?
Post by: RoadDawg on February 29, 2016, 02:56:40 PM
Did a 100 mile run in upper sixty degree temps. Nice and sunny. Stopped for lunch. Great day!
Title: Re: What did you do to or on your CVO today?
Post by: RoadDawg on March 01, 2016, 01:42:51 PM
Short ride to check the gas mileage with my new 117 engine. Looks like about the same as the 110, which is 40 miles per gallon.
Title: Re: What did you do to or on your CVO today?
Post by: SSTuner on March 04, 2016, 05:31:30 PM
Don't have my new 2016 CVO Pro Street Breakout as its on the truck for delivery early next week, got bored and ordered a curved axle mount license plate frame.
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on March 05, 2016, 09:49:46 AM
Actually yesterday but I thoroughly washed and waxed Beauregard getting all the winter travels gunk off and ready for all the spring travels gunk.... ;D

No bug guts in the winter but dang that bike was filthy...didn't look that dirty.

Hopefully heading to huck fins in pigeon forge for some catfish and white beans this afternoon.  Looks to be a good afternoon for riding in east TN.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on March 05, 2016, 09:51:07 AM
Had a new front tire put on the King yesterday.  Waiting for the fog to lift as it looks like it will be a good day for a ride here in East TN.
Title: Re: What did you do to or on your CVO today?
Post by: mjb765 on March 05, 2016, 09:58:31 AM
10" WO578's and heated grips
Title: Re: What did you do to or on your CVO today?
Post by: Road Dad on March 05, 2016, 01:44:35 PM
Still waiting for the snow to melt here so I can put some miles on the new 117!

But while waiting I tried the Royal Blue wax stuff and it was real easy to use. Looks pretty good to. Will be interesting to see how it holds up. I am a wax once a year kinda guy. (Maybe 2 if I am really bored)
Title: Re: What did you do to or on your CVO today?
Post by: RoadDawg on March 05, 2016, 04:02:01 PM
Took a 60 mile ride today. Temps in the mid-fifties so a little chilly. Stopped at the HD dealer and stopped for lunch. Good day...but then, any day is a good day for a ride.
Title: Re: What did you do to or on your CVO today?
Post by: FXD_TG on March 06, 2016, 06:44:28 PM
Pre-flight for the 450 mile ride down to Daytona on Thursday morning.  This will be the first road trip for Blue II and she seems like she's ready to go.  Definitely a less refined girl than Blue I. Idle's a bit more rough but a bit more torque.  Capped the weekend with a short trip to the local watering hole for hot wings, cold beer and good times.
Title: Re: What did you do to or on your CVO today?
Post by: Billy on March 06, 2016, 09:03:26 PM
Installed  Joe Florida's LED accent lighting on bike. Looks Great. Billy A great product and easy to install
Title: Re: What did you do to or on your CVO today?
Post by: JoeVibe on March 07, 2016, 11:01:16 AM
Dropped the Road King off at GMR Saturday for a little work. Took a tour of Steve's new shop (nice set up). Put eyes and hands on a S&S 143 that Steve's putting in an upcoming build and BostonBoy's 117 pistons and cylinders.  :2vrolijk_21:

Now I wait.....
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on March 07, 2016, 11:37:38 AM
Dropped the Road King off at GMR Saturday for a little work.
Now I wait.....

That one made me laugh this morning, Joe.....little work indeed..... :huepfenlol2:
Title: Re: What did you do to or on your CVO today?
Post by: JoeVibe on March 07, 2016, 11:56:05 AM
That one made me laugh this morning, Joe.....little work indeed..... :huepfenlol2:

 :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: OBB on March 07, 2016, 04:53:51 PM
Dropped the Road King off at GMR Saturday for a little work. Took a tour of Steve's new shop (nice set up). Put eyes and hands on a S&S 143 that Steve's putting in an upcoming build and BostonBoy's 117 pistons and cylinders.  :2vrolijk_21:

Now I wait.....
Playing with BB's jugs were ya??  :'(
Title: Re: What did you do to or on your CVO today?
Post by: BostonboyDH on March 07, 2016, 06:16:38 PM
Dropped the Road King off at GMR Saturday for a little work. Took a tour of Steve's new shop (nice set up). Put eyes and hands on a S&S 143 that Steve's putting in an upcoming build and BostonBoy's 117 pistons and cylinders.  :2vrolijk_21:

Now I wait.....

  Hey Joe WERE YOU FONDLING MY JUGS?? :huepfenlol2:
Title: Re: What did you do to or on your CVO today?
Post by: JoeVibe on March 07, 2016, 06:26:19 PM
Have to admit, I did play with them a little.  :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: BostonboyDH on March 07, 2016, 07:16:47 PM
Have to admit, I did play with them a little.  :nixweiss:

  I'm looking forward to when I can play with them too!! ::)
Title: Re: What did you do to or on your CVO today?
Post by: Para Bellum on March 07, 2016, 08:46:03 PM
  I'm looking forward to when I can play with them too!! ::)
But Joe got to play with them when they were loose.
Title: Re: What did you do to or on your CVO today?
Post by: BostonboyDH on March 07, 2016, 09:04:20 PM
 
But Joe got to play with them when they were loose.

   LOL!!
Title: Re: What did you do to or on your CVO today?
Post by: SSTuner on March 10, 2016, 07:24:15 AM
Received my curved plate holder in raw steel, going to my garage to powder coat it "gloss black". Then stare at the plate holder while waiting for my new bike to be delivered. 
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on March 10, 2016, 07:42:20 AM
Received my curved plate holder in raw steel, going to my garage to powder coat it "gloss black". Then stare at the plate holder while waiting for my new bike to be delivered.
Waiting is tough, hang in there.
Title: Re: What did you do to or on your CVO today?
Post by: RoadDawg on March 14, 2016, 05:53:40 PM
100 mile run. Temps near 80. Nice!
Title: Re: What did you do to or on your CVO today?
Post by: Chains on March 14, 2016, 05:59:27 PM
Picked up my bike at the dealer with new tire installed and chrome inner primary.  Compensator was bad so while it was being replaced under extended warranty I felt it was the perfect time to put the primary on free labor lol.

Makes a lot less noise now that its fixed.  Dealer charge to warranty $737.00
Title: Re: What did you do to or on your CVO today?
Post by: RGlideKid on March 14, 2016, 06:19:56 PM
Smart thinking about the inner primary, Jim.  They really finish the look off nicely on the left side.

I changed the oil and primary fluid today, will do the tranny tomorrow morning when she's cool.  Changing all three holes a little sooner than required, pulling a trailer around these Ozarks the way we do.
Title: Re: What did you do to or on your CVO today?
Post by: RoadDawg on March 15, 2016, 10:27:32 AM
Had a new front tire installed and did a short run. Temps in the low 80s.  :drummer:
Title: Re: What did you do to or on your CVO today?
Post by: SSTuner on March 15, 2016, 01:36:08 PM
Cold and rain here in Northern VA, so I pulled all reflectors including the one on the rear fender off my CVO Pro Street, relocated license plate to axle (removed OEM bracket).  Started "black anodizing" all the raw bolts on the front end.  I will post photos in a while.
Title: Re: What did you do to or on your CVO today?
Post by: RGlideKid on March 15, 2016, 02:57:13 PM
Finished up the 5k service & changed the tranny fluid, then washed her and cleaned her up nice.
Title: Re: What did you do to or on your CVO today?
Post by: RoadMonkey on March 15, 2016, 03:58:17 PM
Unpacking from the weekends Daytona ride and a little clean up. Short ride, just because it's so nice outside today!!
Title: Re: What did you do to or on your CVO today?
Post by: Nicky Pass on March 15, 2016, 07:08:00 PM
I put my 3 month over due license plate sticker on because Illinois doesn't send out notices any more!  A little more salt removal rain and I'll be back in the wind?!
Title: Re: What did you do to or on your CVO today?
Post by: Supershooter on March 15, 2016, 10:25:27 PM
Over the weekend the weather cooperated so I was able to ride my bike home from the dealer after, monotubes, monkey bars, new radio, DX head pipe, TTS, and tune. After riding it home I realized the bars were in desperate need of adjustment, so on Sunday afternoon I tore it back apart and moved the bars back 1.25 inches. I also realized the highway pegs needed some attention so they were also remounted to function correctly. After we get a new anntenna and a tour pak rack we'll be ready to ride.....I think
Supershooter
Title: Re: What did you do to or on your CVO today?
Post by: 13CVO on March 16, 2016, 02:39:15 PM
I did the 117 kit.  I had the 110 stage 3, 117 kit very impressive.
Title: Re: What did you do to or on your CVO today?
Post by: SSTuner on March 16, 2016, 06:20:27 PM
Here is a photo before "black anodizing".
Title: Re: What did you do to or on your CVO today?
Post by: SSTuner on March 16, 2016, 06:21:16 PM
Here is a photo after "black anodizing".
Title: Re: What did you do to or on your CVO today?
Post by: SSTuner on March 16, 2016, 06:22:40 PM
Here is a photo before "black anodizing".
Title: Re: What did you do to or on your CVO today?
Post by: SSTuner on March 16, 2016, 06:23:21 PM
Here is a photo after "black anodizing".
Title: Re: What did you do to or on your CVO today?
Post by: SSTuner on March 16, 2016, 06:24:46 PM
Before and after.  Just take 30 seconds for first pass.  Then another 30 seconds to darken further.
Title: Re: What did you do to or on your CVO today?
Post by: JCZ on March 16, 2016, 06:25:39 PM
Amazing how the little details make so much of a difference. :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Kodas on March 16, 2016, 09:15:02 PM
Added Jackpot Pro Touring mufflers. Love the fiber carbon tips, they fill out the opening nicely.
Title: Re: What did you do to or on your CVO today?
Post by: Kodas on March 16, 2016, 09:17:34 PM
Another pic of the carbon fiber end cap
Title: Re: What did you do to or on your CVO today?
Post by: SSTuner on March 17, 2016, 01:52:19 AM
Fuelmoto offers some great product.  Had there SS header on my SG.  Like the Carbon fiber look.



Title: Re: What did you do to or on your CVO today?
Post by: RoadDawg on March 17, 2016, 10:31:17 AM
Went to my CPA and had my taxes done.  :o Drove home and got drunk.  :drink:
Title: Re: What did you do to or on your CVO today?
Post by: SSTuner on March 18, 2016, 07:53:35 PM
More anodize blackening. Before.
Title: Re: What did you do to or on your CVO today?
Post by: SSTuner on March 18, 2016, 07:54:20 PM
More anodize blackening. After.  (Red reflection is from HF lift).
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on March 18, 2016, 11:34:52 PM
More anodize blackening. After.  (Red reflection is from HF lift).
Looks great, love the detail!
Title: Re: What did you do to or on your CVO today?
Post by: johnmowcop on March 19, 2016, 01:58:03 PM
More anodize blackening. Before.

Hello SSTuner.

I like the look of the black anodizing, tried to find out what you are doing by going back a few pages, cannot see any information.

Is this some kind of kit you use to do it at home or do you send it off. I thought anodizing (anodising) was only for Aluminium (Aluminum).

Whatever it is it looks good, I could use that on the fasteners on old bikes as well. Information please.

JohnT
Title: Re: What did you do to or on your CVO today?
Post by: JCZ on March 19, 2016, 10:11:09 PM
I got a new back tire.

Ran in to this Freightliner and three axel stacker at the dealership.....


(https://farm2.staticflickr.com/1686/25894388016_779b390c07_c.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: Yellow09SERG on March 20, 2016, 04:27:08 PM
She got a new set of lifters and a fresh oil change. She should be ready to go again for another riding season
Title: Re: What did you do to or on your CVO today?
Post by: Supershooter on March 20, 2016, 09:11:39 PM
Spring fever, wishing the bugs off.
Supershooter
Title: Re: What did you do to or on your CVO today?
Post by: Road Dad on March 20, 2016, 09:30:08 PM
Did some adjusting on the rear shocks. (Static sag and rebound). Took it for a test. Made a big difference.

Next, Öhlins for the forks!
Title: Re: What did you do to or on your CVO today?
Post by: longlast on March 20, 2016, 09:33:41 PM
I got a new back tire.

Ran in to this Freightliner and three axel stacker at the dealership.....


(https://farm2.staticflickr.com/1686/25894388016_779b390c07_c.jpg)

Oh damn!! You ok? Freightliner looks good,... :nervous: ;D ;)

Title: Re: What did you do to or on your CVO today?
Post by: Yellow09SERG on March 21, 2016, 12:34:05 AM
Spring fever, wishing the bugs off.
Supershooter

And we see you have the boss helping  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Scooter127 on March 21, 2016, 11:38:23 AM
Well, i bought it 3 days ago, a friend bought me stubby antennas as a gift on Saturday, Sunday I installed the garage door opener receiver.  Today I will put the ~11 inch windsplitter windshield on it then ride to the dealer and swap that with the tall one on the bike I traded in.  Frazier's in Buford, GA, treats me really well.  Buy 3 Road Glides from them with one being a CVO and they'll treat you well too!

 :bananarock: :orange: :mango: :apple: :carrot: :cucumber: :pepper:
Title: Re: What did you do to or on your CVO today?
Post by: DCFIREMANN on March 23, 2016, 10:41:25 AM
Well today Ole Punkin is going to get a new set of Progressive 944 shocks on her. I put a set of Progressive 440's on her back in 2005 I believe and I have a broken one. It will be nice to have a decent handling bike again!!!! Maybe this year I will up the front suspension as well.

Be Safe

THE DAWG











Title: Re: What did you do to or on your CVO today?
Post by: Miss Susan on March 23, 2016, 08:38:30 PM
Shrader and I took a short jaunt this evening, about 60-70 miles before the big light went out. Shrader rode his Road King and was on my 03 Lowrider.   First ride of the year, finally warm enough and no salt on road.  :)

Picture is on top of East River Mountain overlooking Bluefield WV.

Miss Susan
Title: Re: What did you do to or on your CVO today?
Post by: RoadDawg on March 24, 2016, 02:28:51 PM
Went to a funeral for a Greenville, SC police officer that was murdered by a gang member. He was 28-years-young with a pregnant wife and two children. Hundreds and hundreds of police Motorcycles and cars showed up. So sad that he died so young. He was a decorated officer.
Title: Re: What did you do to or on your CVO today?
Post by: Scooter127 on March 25, 2016, 07:41:17 AM
Today I will be going into the office where it will be seen for the first time by coworkers.  One of them, who became a motorcycle "expert" after buying his first bike, will go over it with a fine toothed comb and then proceed to tell everyone willing to listen, and many unwilling, how he'd never spend that much on a bike.  Of course, to my face he'll tell me what a sweet ride it is.

Lol, I always get cynical when I have to go into the office.
Title: Re: What did you do to or on your CVO today?
Post by: JCZ on March 25, 2016, 10:26:22 AM
Today I will be going into the office where it will be seen for the first time by coworkers.  One of them, who became a motorcycle "expert" after buying his first bike, will go over it with a fine toothed comb and then proceed to tell everyone willing to listen, and many unwilling, how he'd never spend that much on a bike.  Of course, to my face he'll tell me what a sweet ride it is.

Lol, I always get cynical when I have to go into the office.

Thanks for the chuckle this morning.....it was needed.   :2vrolijk_21:

Lately I've had two Mondays every week......they fall on Mon and Fri.  :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: RGlideKid on March 25, 2016, 05:27:20 PM
I fiddle-farted with that "software" on Harley's website for route planning for our new 6.5 GPS systems.
I must be used to real software written by people who actually have to use it, because in all my decades of dealing with software and computers; to my recollection, I've never used any type of GPS software that was more contrary and frustrating.
And why, for the price of admission into the CVO community, Harley wouldn't include real software for us to put on our PC's or Mac's that would do the job right locally, is beyond me. 
And while we're talking software, why do we have to buy updates for our maps?  For $40k for the bike, you'd think we'd get updates for, say, the life of the warranty at no extra charge.
Oh, well.  Maybe the new marketing weenie will take care of things like this.
Right...
Title: Re: What did you do to or on your CVO today?
Post by: OBB on March 25, 2016, 07:18:56 PM
I fiddle-farted with that "software" on Harley's website for route planning for our new 6.5 GPS systems.
I must be used to real software written by people who actually have to use it, because in all my decades of dealing with software and computers; to my recollection, I've never used any type of GPS software that was more contrary and frustrating.
And why, for the price of admission into the CVO community, Harley wouldn't include real software for us to put on our PC's or Mac's that would do the job right locally, is beyond me. 
And while we're talking software, why do we have to buy updates for our maps?  For $40k for the bike, you'd think we'd get updates for, say, the life of the warranty at no extra charge.
Oh, well.  Maybe the new marketing weenie will take care of things like this.
Right...
You get three free updates over a five year period (I think) for a CVO bike.
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on March 25, 2016, 09:40:08 PM
new arc 600w Arc amp and 4 focal level 4s from Soundz Customz
new Vance and Hines full exhaust with Fuel Pak #3
new Windvest 14" wind shield
new Yaffe 12" chrome monkee apes bars
new SoftBrake rear brake lever with extended front shifter.

i think im done for a while,,,, Stuart
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on March 25, 2016, 09:45:41 PM
new arc 600w Arc amp and 4 focal level 4s from Soundz Customz
new Vance and Hines full exhaust with Fuel Pak #3
new Windvest 14" wind shield
new Yaffe 12" chrome monkee apes bars
new SoftBrake rear brake lever with extended front shifter.

i think im done for a while,,,, Stuart
Stu... see what happens when you get a new bike... start fresh again. :D Enjoy!!! :2vrolijk_21:

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on March 25, 2016, 10:33:47 PM
Thanks d00d.  I just hope I don't see anything else I might like. . . But Thanks. . .
Title: Re: What did you do to or on your CVO today?
Post by: 110tHunDer on March 25, 2016, 10:52:40 PM
Got the SERG out and exercised her a bit.  She had been hibernating for awhile.  Still a great looking and nice riding bike!
Title: Re: What did you do to or on your CVO today?
Post by: HUBBARD on March 25, 2016, 11:01:39 PM
That's a good lookin' machine, Brian.  Local business man here, had one just like it for sale with 280 original miles.  I stopped bidding at $18K...went for $20K.  Wish I'da bought it.  Later--HUBBARD 
Title: Re: What did you do to or on your CVO today?
Post by: RGlideKid on March 25, 2016, 11:03:34 PM
You get three free updates over a five year period (I think) for a CVO bike.

I'll definitely look into that!  Thanks, Mike!
Title: Re: What did you do to or on your CVO today?
Post by: RoadMonkey on March 26, 2016, 05:20:14 PM
Went to a funeral for a Greenville, SC police officer that was murdered by a gang member. He was 28-years-young with a pregnant wife and two children. Hundreds and hundreds of police Motorcycles and cars showed up. So sad that he died so young. He was a decorated officer.
We were there too. R.I.P. So sad, but the memorial was touching and nice to see the community support after tragic event.
Title: What did you do to or on your CVO today?
Post by: MrSurly on March 26, 2016, 10:15:32 PM
I RODE IT!!
Some friends and I make an annual trek to the tiny speck of Snook, TX to enjoy a local specialty, Chicken Fried Bacon. Yes, it IS worth the trip!
451 miles today and rolled over the 30000 mile mark on this bike. 27 of those are mine (I bought a garage queen).
The weather was fantastic, if a little nippy to start.
(http://uploads.tapatalk-cdn.com/20160327/e2b407253b77c18536e23d75e8211009.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on March 27, 2016, 07:08:25 AM
New harley Tribal mirrors. . I had these on the sg. . . Really liked them.  And some shorty antennas. . Got away cheap yesterday. 
Title: Re: What did you do to or on your CVO today?
Post by: cambo on March 27, 2016, 11:47:18 AM
Got the inspection done, rode around for a a half hour and took some pictures (of course!).

(https://farm2.staticflickr.com/1640/25445964194_35303594d1_c.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: 110tHunDer on March 27, 2016, 03:32:23 PM
Great pic! :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: 2soaper on March 27, 2016, 05:33:36 PM
Nice looking bike would love to have one.....
Title: Re: What did you do to or on your CVO today?
Post by: RGlideKid on March 27, 2016, 09:41:57 PM
Put 165 miles on her yesterday, on some of the twisties near Mountain Home and Bull Shoals Lake, as you can see below.
Contrary to what it may look like out there in the distance, the lake is within a foot of being at "full pool", which is to say..."normal pool".
The water was super clear, but won't be ready for swimming until early June without a wetsuit.  The high was right at 70 degrees yesterday, the low tonight will be around 31. 
Fickle later winter weather, but I was really happy for a beautiful day to take her out!
Title: Re: What did you do to or on your CVO today?
Post by: RGlideKid on March 27, 2016, 09:50:38 PM
And one more with the Bull Shoals Dam in the background from yesterday's ride.  At the time the dam was completed, it was the 5th largest in the country of its type.
The water in the lake at maximum capacity (I've seen it like that back in 2011), is enough water to fill 5,760,000 acres of land one foot deep.  It is the 16th largest reservoir in the country and a retirement paradise!
Title: Re: What did you do to or on your CVO today?
Post by: TNCarters on March 27, 2016, 10:31:45 PM
Nice looking lake and dam Harry.  That was one of my jobs before I retired was for design and inspect dams.
Title: Re: What did you do to or on your CVO today?
Post by: Hnhcvo on March 27, 2016, 10:48:07 PM
Put 150 miles on the skunk today... First real day of riding in 5 months. Nothing better than 2 wheels and sunshine (http://uploads.tapatalk-cdn.com/20160328/a10ae6ca05640e63195a7d584d8b4f0e.jpg)


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: turn_key on March 28, 2016, 01:23:28 AM
Kuryakyn heel shifter eliminator and a cell phone holder..
Title: Re: What did you do to or on your CVO today?
Post by: SneakyPete on March 28, 2016, 12:26:21 PM
Put 150 miles on the skunk today... First real day of riding in 5 months. Nothing better than 2 wheels and sunshine (http://uploads.tapatalk-cdn.com/20160328/a10ae6ca05640e63195a7d584d8b4f0e.jpg)


Sent from my iPhone using Tapatalk

Gorgeous bike, congrats!!! :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Hnhcvo on March 28, 2016, 10:30:55 PM
Gorgeous bike, congrats!!! :2vrolijk_21:
Thanks man appreciate it!!!
Title: Re: What did you do to or on your CVO today?
Post by: Hnhcvo on March 29, 2016, 06:40:47 PM
34 degrees and couldn't resist.... 20 freezing miles but felt like heaven (http://uploads.tapatalk-cdn.com/20160329/c719b47b39bfddf2c8cc2f08cf1b6f82.jpg)


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: 262 CVO 16 on March 30, 2016, 05:15:41 AM
34 degrees and couldn't resist.... 20 freezing miles but felt like heaven (http://uploads.tapatalk-cdn.com/20160329/c719b47b39bfddf2c8cc2f08cf1b6f82.jpg)


Sent from my iPhone using Tapatalk

Adda Boy!!!!!
Title: Re: What did you do to or on your CVO today?
Post by: Gerhard on March 30, 2016, 07:21:51 AM
Did a nice ride on a not so sunny day - first miles on my new FLHXSE ...
Title: Re: What did you do to or on your CVO today?
Post by: Gerhard on March 30, 2016, 07:33:46 AM
at last ...sun ::) ::) ::)
Title: Re: What did you do to or on your CVO today?
Post by: Gerhard on March 30, 2016, 07:36:53 AM
1st day: Mission accomplished  8)
Title: Re: What did you do to or on your CVO today?
Post by: Markeje on March 30, 2016, 09:10:21 AM
Starting to put this beast back together finally. PC all chrome Black. This is an older pic. Primary and all is off. Handle bars and controls will have to wait until next winter I'm afraid. Then some 575's. Should have quite a bit done after this Saturday...I hope.
Title: Re: What did you do to or on your CVO today?
Post by: Gerhard on March 30, 2016, 10:55:13 AM
Put 150 miles on the skunk today... First real day of riding in 5 months. Nothing better than 2 wheels and sunshine (http://uploads.tapatalk-cdn.com/20160328/a10ae6ca05640e63195a7d584d8b4f0e.jpg)


Sent from my iPhone using Tapatalk

All thumbs up, genius design & paintjob  :o :o :o
Title: Re: What did you do to or on your CVO today?
Post by: Hnhcvo on March 30, 2016, 11:05:42 AM
All thumbs up, genius design & paintjob  :o :o :o
Thank you. Appreciate the compliment. Couldn't be happier
Title: Re: What did you do to or on your CVO today?
Post by: Hnhcvo on March 30, 2016, 11:28:36 AM
Put 165 miles on her yesterday, on some of the twisties near Mountain Home and Bull Shoals Lake, as you can see below.
Contrary to what it may look like out there in the distance, the lake is within a foot of being at "full pool", which is to say..."normal pool".
The water was super clear, but won't be ready for swimming until early June without a wetsuit.  The high was right at 70 degrees yesterday, the low tonight will be around 31. 
Fickle later winter weather, but I was really happy for a beautiful day to take her out!
Beautiful back drop and even prettier bike!!
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on March 30, 2016, 12:56:30 PM
Installed this....
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on March 30, 2016, 01:00:05 PM
It came in today, installed while on my lunch break.  It's wider than my Freedom it replaced and lays back just a touch more.  I'll post on the vendor reviews when I have a few more miles behind it.  My first impression is the wind pocket is much nicer for me and I can tell the side wind will be reduced for Vickie...which is what I needed.  I'm a Freedom shield supporter but from my initial impression, the Clearview will be a great addition.

Picture from the saddle....
Title: Re: What did you do to or on your CVO today?
Post by: OBB on March 30, 2016, 01:50:48 PM
Rode to work. I really need to get my Gerbings glove controller wired up.
Title: Re: What did you do to or on your CVO today?
Post by: Hnhcvo on March 30, 2016, 06:19:50 PM
Managed to get out and burn a tank today with my 2 best buds!! Good day (http://uploads.tapatalk-cdn.com/20160330/380df406d0ff548c9ea1a6a773741eaf.jpg)


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: dayne66 on March 30, 2016, 06:40:38 PM
Loaded it up and tied her down on the trailer for the trip down to Deeley's in Langford to get the noisy lifters looked after.
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on March 31, 2016, 08:03:28 AM
Nothing at all this spring, I guess it would help if I was in town more.
Title: Re: What did you do to or on your CVO today?
Post by: longlast on March 31, 2016, 04:40:08 PM
Loaded it up and tied her down on the trailer for the trip down to Deeley's in Langford to get the noisy lifters looked after.

LANGFORD,... know one on the Island you trust?
Title: Re: What did you do to or on your CVO today?
Post by: Gerhard on April 01, 2016, 07:28:23 AM
Managed to get out and burn a tank today with my 2 best buds!! Good day (http://uploads.tapatalk-cdn.com/20160330/380df406d0ff548c9ea1a6a773741eaf.jpg)


Sent from my iPhone using Tapatalk

awesome flightline! Talkin about "skunk" - I wear a nice sticker on my Bell-Helmet, citing the Skunk Works/Area51. Got it from my friends at www.sierrahotel.net  ;)
Title: Re: What did you do to or on your CVO today?
Post by: Hnhcvo on April 01, 2016, 10:11:16 PM
awesome flightline! Talkin about "skunk" - I wear a nice sticker on my Bell-Helmet, citing the Skunk Works/Area51. Got it from my friends at www.sierrahotel.net  ;)
That's amazing. I need one of those
Title: Re: What did you do to or on your CVO today?
Post by: SSTuner on April 02, 2016, 06:41:01 AM
Continuing the "black out" on my Pro Street.
Before:
Title: Re: What did you do to or on your CVO today?
Post by: SSTuner on April 02, 2016, 06:41:42 AM
Continuing the "black out" on my Pro Street.
After:
Title: Re: What did you do to or on your CVO today?
Post by: longlast on April 03, 2016, 06:33:52 AM
Worked on the tail pipes could hear some squeaking going on. pulled them off did a bit of clean up on the clamp end, a little mod to the clamp. reinstalled. no more squeaking. Bob your uncle job done ;) 
Title: Re: What did you do to or on your CVO today?
Post by: Joel on April 03, 2016, 02:23:42 PM
I actually did this friday.
Took the day off work so I could ride 240 mIles to my selling dealer to have a new fob and key set programed to the bike . I had lost the original set on the way home last September after getting the 1000 mile service. While there I had them look into why the front tire losses air pressure,  20 lbs per week. Let them know it's been doing this sense we got it and all I could find was a bead leak, and the nubs are stuck between the rim and tire.
Well after looking for the leak and not finding any thing they put a new tire on, N/C
I  could  have gone to the local dealer, same owner, only 30 miles aways, but I have more faith in the Hells Canyon dealer. And it was a great day for a ride.
Title: Re: What did you do to or on your CVO today?
Post by: Rumblerider on April 03, 2016, 03:48:59 PM
Installed RAM Mounts to my handle bars (right and left reservoir mounts).  Put on the drink holder and a phone "X-Grip".  Going to have to get a double-joint arm to get the phone mount where I want it.  So far looking good.  Have to find an ACE H/W store to get some chrome bolts and spacers though.  The black ones just won't do...
Title: Re: What did you do to or on your CVO today?
Post by: SSTuner on April 03, 2016, 05:06:22 PM
More (before).
Title: Re: What did you do to or on your CVO today?
Post by: SSTuner on April 03, 2016, 05:07:31 PM
More (After)
Title: Re: What did you do to or on your CVO today?
Post by: RoadMonkey on April 03, 2016, 06:29:17 PM
I have removed my front lower fairings with speakers...
Title: Re: What did you do to or on your CVO today?
Post by: RGlideKid on April 03, 2016, 07:27:19 PM
Me and the wife put about 125 miles on her, went to the #1 restaurant in the tri-county area, had a fabulous dinner and a safe ride with low 70's weather and clear.  It was a good time and the bike ran like a fine-tuned Swiss watch.
Title: Re: What did you do to or on your CVO today?
Post by: Supershooter on April 03, 2016, 10:24:48 PM
Installed RAM Mounts to my handle bars (right and left reservoir mounts).  Put on the drink holder and a phone "X-Grip".  Going to have to get a double-joint arm to get the phone mount where I want it.  So far looking good.  Have to find an ACE H/W store to get some chrome bolts and spacers though.  The black ones just won't do...

I'd like some pics, I'm trying to decide which brand/style I'd like to use.
Thanks Supershooter
Title: Re: What did you do to or on your CVO today?
Post by: Rumblerider on April 04, 2016, 12:28:11 AM
I'd like some pics, I'm trying to decide which brand/style I'd like to use.
Thanks Supershooter

No Problem.  I'll post some tomorrow...
Title: Re: What did you do to or on your CVO today?
Post by: RoadDawg on April 04, 2016, 09:22:09 AM
Took a 100 mile run. Temps in the 60s with plenty of sun. Stopped for lunch. Nice!  ;D
Title: Re: What did you do to or on your CVO today?
Post by: RGlideKid on April 04, 2016, 01:26:55 PM
Got out my big "T" bag and took the drivers backrest off and did a check fit on the rear seat.  Works perfect, but I'll have to ride without my backrest.  Will pack it separately.
Getting ready for the Eureka Springs mini-GTG in May!  Yeah!
Title: Re: What did you do to or on your CVO today?
Post by: MrSurly on April 05, 2016, 10:26:04 AM
Installed Progressive monotubes, reinstalled the Ohlins #3-3s after Howard rebuilt them; Garmin 665 and dash mount, put the stock windshield back on.
I can't seem to find the windshield to make me happy. Winvest/Klockworks/a couple others...
The ride is much improved!
Title: Re: What did you do to or on your CVO today?
Post by: SSTuner on April 06, 2016, 07:34:43 AM
More bolt "black out" on my CVO Pro Street.  But this time I replaced bolts with higher quality ARP hardware which exceed H-D specs.

Before and After
Title: Re: What did you do to or on your CVO today?
Post by: SSTuner on April 06, 2016, 07:42:44 AM
More bolt "black out" on my CVO Pro Street.  But this time I replaced bolts with higher quality ARP hardware which exceed H-D specs.

Before and After
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on April 06, 2016, 08:19:10 AM
The good Lord is playing with our thermostat again.....31 degrees this morning riding into work and forecast of 26 this coming Sunday morning.  It was almost 80 this past weekend.....weather is such a treat in East Tennessee...... ;D
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on April 06, 2016, 09:27:21 PM
The good Lord is playing with our thermostat again.....31 degrees this morning riding into work and forecast of 26 this coming Sunday morning.  It was almost 80 this past weekend.....weather is such a treat in East Tennessee...... ;D
Someone told me that Tennessee does in fact have both winter and summer.....sometimes on the same day.

I hear that this weekend the temperature  is supposed to get up around 70 or so in Middle TN. I don't have the option of riding to work, but we'll be out again this weekend.
Title: Re: What did you do to or on your CVO today?
Post by: MC16LTD on April 07, 2016, 12:35:26 AM
Installed Wild1's 10" mini-apes and installed a star/post bit security screw for my seat.  Getting bike ready for Thunder Beach.
Title: Re: What did you do to or on your CVO today?
Post by: Rumblerider on April 07, 2016, 12:56:42 AM
I'd like some pics, I'm trying to decide which brand/style I'd like to use.
Thanks Supershooter

Supershooter, I haven't forgotten about the pictures.  I had to order a couple of things to get the mounts like I want them.  I'll post some pics early next week after I get the install finished....
Title: Re: What did you do to or on your CVO today?
Post by: RoadMonkey on April 07, 2016, 12:19:17 PM
Installed Wild1's 10" mini-apes and installed a star/post bit security screw for my seat.  Getting bike ready for Thunder Beach.
:2vrolijk_21: :2vrolijk_21: :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: MrSurly on April 07, 2016, 12:25:20 PM
About a month ago I replaced the SE Compensator and the clutch (Bandit) and planned to be 'done' in the primary for a while. I rode it to work Wednesday and the stator fried...
So last evening I replaced the stator.
Wheeeee! this is soooo fun... somedays, not so much
Title: Re: What did you do to or on your CVO today?
Post by: RayG on April 07, 2016, 03:07:59 PM
How much oil are you running in the primary?  Some of the guys with the Bandit are running low on the oil for the clutch but the compensator does not get enough oil for the long haul.  I've already had 5 compensators replaced, so I'm on the 6th one right now.  I run the AIM with the VP lock up and run one quart of Belray and so far it has lasted.  I had to replace the stator over the winter.  In 88,000 miles there isn't much I haven't replaced once or twice, it's a shame one has to replace enough parts that would build another bike just to put some miles on some of our bikes. 

You are right about it not being fun to keep doing things over & over!  Sounds like you should be set for awhile.
Title: Re: What did you do to or on your CVO today?
Post by: MrSurly on April 07, 2016, 03:38:18 PM
How much oil are you running in the primary?  Some of the guys with the Bandit are running low on the oil for the clutch but the compensator does not get enough oil for the long haul.  I've already had 5 compensators replaced, so I'm on the 6th one right now.  I run the AIM with the VP lock up and run one quart of Belray and so far it has lasted.  I had to replace the stator over the winter.  In 88,000 miles there isn't much I haven't replaced once or twice, it's a shame one has to replace enough parts that would build another bike just to put some miles on some of our bikes. 

You are right about it not being fun to keep doing things over & over!  Sounds like you should be set for awhile.
Yes, in light of Bandit's recommendation, I decided to run the low level that they insisted was great for their clutch and they claimed it would be fine for the comp and the stator.
A protracted discussion on another forum took place beforehand and an extension of that is going on now. Suffice it to say that I will be running *more* oil than Bandit recommends from now on. To be fair, the stator was old and tired and the insulation was no doubt somewhat compromised; I can't say the lack of cooling lube actually *caused* the stator immolation, but you can be assured that it didn't help prevent it!

Are you running the "New SE" comp? That's the one I used (in the 42200064A kit)
It *looks* like a much better design than its predecessor.
Title: Re: What did you do to or on your CVO today?
Post by: RayG on April 07, 2016, 05:56:50 PM
I'm using the new compensator, the previous one that came out with the oiling glue on kit had a one year warranty so when mine failed they gave sent me the new model as a replacement.  The sales person told me to just send photos as they had a pile of failed compensators that were replaced as well.  I do plan on installing the GMR oiling tray the next time I open the primary, it cant hurt.  Since my primary cover was pretty well scratched by a dealer I received a great price on the new primary cover with the oil trays built into it which is standard on the newer models.   
Title: What did you do to or on your CVO today?
Post by: MrSurly on April 08, 2016, 04:54:12 PM
I'm using the new compensator, the previous one that came out with the oiling glue on kit had a one year warranty so when mine failed they gave sent me the new model as a replacement. 

Wait, are you saying there's yet another 'new' one since the "new SE 42200064A"?

Part number?
Does it appear different than this?
(http://uploads.tapatalk-cdn.com/20160408/d411f15f8ed966560de9ce440dd72d14.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: bigchuck on April 08, 2016, 05:38:03 PM
I'm using the new compensator, the previous one that came out with the oiling glue on kit had a one year warranty so when mine failed they gave sent me the new model as a replacement.  The sales person told me to just send photos as they had a pile of failed compensators that were replaced as well.  I do plan on installing the GMR oiling tray the next time I open the primary, it cant hurt.  Since my primary cover was pretty well scratched by a dealer I received a great price on the new primary cover with the oil trays built into it which is standard on the newer models.   
How is paying anything for a part that the dealership messed up a "great price"? Unless you got it somewhere else or if they took full retail price of the original part off of the upgraded part price.
Title: Re: What did you do to or on your CVO today?
Post by: Road Dad on April 08, 2016, 05:47:21 PM
Added two custom 117 covers  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: ELB62 on April 09, 2016, 02:02:09 PM
King Tour PAK and Paul Yaffe Stealth 3 CVO/ Universal License Frame.
Title: Re: What did you do to or on your CVO today?
Post by: ELB62 on April 09, 2016, 02:03:51 PM
King Tour PAK
Title: Re: What did you do to or on your CVO today?
Post by: Rumblerider on April 09, 2016, 10:20:20 PM
I'd like some pics, I'm trying to decide which brand/style I'd like to use.
Thanks Supershooter

I attempting to attach a pic.  This one's from my riding position.
Title: Re: What did you do to or on your CVO today?
Post by: Rumblerider on April 09, 2016, 11:11:44 PM
I attempting to attach a pic.  This one's from my riding position.

This one's of the left side.



Title: Re: What did you do to or on your CVO today?
Post by: Rumblerider on April 09, 2016, 11:18:17 PM
I'd like some pics, I'm trying to decide which brand/style I'd like to use.
Thanks Supershooter

This one is of the right side.  You will have to get a connector and use two arms to be able to get the X-Grip properly positioned.  You can use a long arm and a very short one or two standard arms.  I also ordered a second ball to go into the reservoir base (note the hole).

If you wanted, you could put the drink holder and the phone on the right side.  I'll switch the phone to the horizontal ball when I get it and keep the top ball open for the GoPro on a long arm.

Good Luck!
Title: Re: What did you do to or on your CVO today?
Post by: RoadDawg on April 10, 2016, 01:39:22 PM
Went on a 90 mile charity poker run to benefit muscular dystrophy. Best hand paid $3000. Worst hand paid $200. Would have had the worst hand if it weren't for that darned 9 of clubs.
Title: Re: What did you do to or on your CVO today?
Post by: 262 CVO 16 on April 10, 2016, 02:42:54 PM
King Tour PAK and Paul Yaffe Stealth 3 CVO/ Universal License Frame.
Can you post some pictures of your Tour Pack? We just ordered one for our '16 Carbon/Phantom and I want to see how it looks, the paint scheme layout, etc. 
Title: Re: What did you do to or on your CVO today?
Post by: Gerhard on April 11, 2016, 09:46:58 AM
That's amazing. I need one of those
see: http://sierrahotel.net/Aviation-Decals/The-Skunk-Works-p152.html

 :)
Title: Re: What did you do to or on your CVO today?
Post by: Gerhard on April 11, 2016, 09:53:53 AM
 :( ... still waitin for the new CVO-Button on the tank - it was illuminated only up to 2/3: the "vehicle" in CVO wasn´t ruby red at all. hm.
Title: Re: What did you do to or on your CVO today?
Post by: Gerhard on April 11, 2016, 10:01:46 AM
Another thing with my 2016 SG - has anyone ever heard about?
If I´m sittin on the bike, ridin straight, the bar and the fairing are turned to starboard at about 3 degrees. Just by looking at the bar and fairing, it seems that I ride in a constant right turn ... of course the SG runs straight ahead. my shop said, they´re goin to fix that, but I wonder how, and what causes this effect?
Title: Re: What did you do to or on your CVO today?
Post by: 262 CVO 16 on April 11, 2016, 10:05:50 AM
King Tour PAK
I'm assuming it's color matched. Is there flames on it to match the rest of the bike?
Title: Re: What did you do to or on your CVO today?
Post by: Bav on April 13, 2016, 11:59:18 AM
Went for a ride in the sunshine with my girlfriend on her newly custom painted Street Bob to Jacks Hill Cafe in Northamptonshire for a cup of tea. Very pleasant afternoon

(http://uploads.tapatalk-cdn.com/20160413/ac7f260b92c7b6ec14992fc793bdf171.jpg)

(http://uploads.tapatalk-cdn.com/20160413/0209d13a92205e3cdec33baf42542148.jpg)


Sent from my iPad using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: SSTuner on April 13, 2016, 01:00:36 PM
Finally gutted to CAT out of the standard Breakout mufflers.  Even noticed that the length is shorter of the normal vs. CVO Pro Street.  I even powder coated the standard exhaust with black.  Standard is 2 1/2 shorter.
Title: Re: What did you do to or on your CVO today?
Post by: MC16LTD on April 13, 2016, 06:54:01 PM
Installed Kuryakyn Tour-Pak relocator.  Wife wanted more wiggle room.
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on April 13, 2016, 09:09:30 PM
Went for a ride in the sunshine with my girlfriend on her newly custom painted Street Bob to Jacks Hill Cafe in Northamptonshire for a cup of tea. Very pleasant afternoon

(http://uploads.tapatalk-cdn.com/20160413/ac7f260b92c7b6ec14992fc793bdf171.jpg)

(http://uploads.tapatalk-cdn.com/20160413/0209d13a92205e3cdec33baf42542148.jpg)


Sent from my iPad using Tapatalk
nice and the fairing on the king...nicely done also
Title: Re: What did you do to or on your CVO today?
Post by: Burgundy Blaze CVO on April 14, 2016, 10:55:27 PM
 :apple: I took my wife for her first ride on the cvo today!
Title: Re: What did you do to or on your CVO today?
Post by: Hnhcvo on April 15, 2016, 09:19:37 PM
Spent the work day riding from job to job. Was a good day when you burn a tank "working" lol (http://uploads.tapatalk-cdn.com/20160416/ba5c94533f5f175e83e07f89c086c649.jpg)


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Road Dad on April 15, 2016, 09:37:19 PM
Received and installed my new Russell seat. Feels awesome!!  1,000 Mile days should be easy now.
Title: Re: What did you do to or on your CVO today?
Post by: JCZ on April 15, 2016, 10:58:25 PM
:apple: I took my wife for her first ride on the cvo today!

 :worthless: :worthless: :worthless:
Title: Re: What did you do to or on your CVO today?
Post by: Hnhcvo on April 16, 2016, 10:22:05 AM
(http://uploads.tapatalk-cdn.com/20160416/8829719acc5b004ef19de42245557e8a.jpg)ran to my favorite breakfast spot. Couldn't resist the sunshine this am


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: jonny cash on April 16, 2016, 12:43:55 PM
Went to the dragstrip
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on April 16, 2016, 05:50:55 PM
I put on a rack light kit today. . Works as a running /brake light. . Pretty cool.
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on April 16, 2016, 05:57:51 PM
installed some WARDS PARTS WERKS fans ... no mention in instructions of best place to mount the sensor  :nixweiss: open for suggestions 
Title: Re: What did you do to or on your CVO today?
Post by: MIKEYTEE on April 16, 2016, 07:03:10 PM
Got out my big "T" bag and took the drivers backrest off and did a check fit on the rear seat.  Works perfect, but I'll have to ride without my backrest.  Will pack it separately.
Getting ready for the Eureka Springs mini-GTG in May!  Yeah!

Harry, I have a Road Ready back seat bag that I use as a back rest. I have a twin air mattress in there that I can adjust the firmness with my air compressor. My clothes go in the trailer with the refreshments. You'll see it in ES.
Mike
 :drink:



 
Title: Re: What did you do to or on your CVO today?
Post by: Mr. Warlock on April 17, 2016, 05:40:24 AM
installed some WARDS PARTS WERKS fans ... no mention in instructions of best place to mount the sensor  :nixweiss: open for suggestions

Assuming you mean the Thermal Switch..... http://wardspartswerks.com/thermal-snap-switch-install.html
Title: Re: What did you do to or on your CVO today?
Post by: ELB62 on April 17, 2016, 07:40:14 AM
I'm assuming it's color matched. Is there flames on it to match the rest of the bike?

Here you go, flames on the top only.  Disappointed the hinges and latch are chrome.
Title: Re: What did you do to or on your CVO today?
Post by: ELB62 on April 17, 2016, 07:43:48 AM
Can you post some pictures of your Tour Pack? We just ordered one for our '16 Carbon/Phantom and I want to see how it looks, the paint scheme layout, etc.

One more pic of tour PAK.
Title: Re: What did you do to or on your CVO today?
Post by: ELB62 on April 17, 2016, 07:49:44 AM
(http://uploads.tapatalk-cdn.com/20160416/8829719acc5b004ef19de42245557e8a.jpg)ran to my favorite breakfast spot. Couldn't resist the sunshine this am


Sent from my iPhone using Tapatalk

Very NICE!!
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on April 17, 2016, 08:29:38 AM
Ordered a Magic Strobe from Custom Dynamics, previously they did not offer an option for the Breakout.
Title: Re: What did you do to or on your CVO today?
Post by: JCZ on April 17, 2016, 09:45:28 AM
Rode to Tecate, Mexico for lunch.....see Ride Report
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on April 17, 2016, 10:29:01 AM
Assuming you mean the Thermal Switch..... http://wardspartswerks.com/thermal-snap-switch-install.html
  :2vrolijk_21: i missed that some how
Title: Re: What did you do to or on your CVO today?
Post by: 262 CVO 16 on April 17, 2016, 10:37:22 AM
Here you go, flames on the top only.  Disappointed the hinges and latch are chrome.
We ordered one - then ordered new latches and hinges in black. Color matched for a bIke w BLACK HARDWARE, but comes with Chrome?! Stupid.
Title: Re: What did you do to or on your CVO today?
Post by: jachd17 on April 17, 2016, 07:10:10 PM
Went to the dragstrip

What was your time?
Title: Re: What did you do to or on your CVO today?
Post by: Nicky Pass on April 17, 2016, 07:38:17 PM
Installed Custom Dynamics Ringz...they are awesome!
Title: Re: What did you do to or on your CVO today?
Post by: Nicky Pass on April 17, 2016, 07:39:11 PM
...another
Title: Re: What did you do to or on your CVO today?
Post by: OBB on April 17, 2016, 08:47:59 PM
Killed a few bugs with it and got some sunburn in the process. Mid April in Ohio I can deal with the little bit of sunburn  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: jonny cash on April 17, 2016, 08:52:39 PM
What was your time?

7.30 @ 98MPH,  1/8 MILE
Title: Re: What did you do to or on your CVO today?
Post by: 4fun on April 17, 2016, 09:06:50 PM
Took an after dinner ride to my son's house, had a cigar and came home, an hour ride each way.

Sent from my SM-G900V using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: Royalroadie on April 17, 2016, 09:12:39 PM
We ordered one - then ordered new latches and hinges in black. Color matched for a bIke w BLACK HARDWARE, but comes with Chrome?! Stupid.

That's the "Harley Way".  Why give what you want if they can get away with charging you extra.
Title: Re: What did you do to or on your CVO today?
Post by: ImBroke on April 17, 2016, 09:37:54 PM
Here you go, flames on the top only.  Disappointed the hinges and latch are chrome.

yea, no kidding.  I picked up my chopped tp for my 16 and the hinges and latch are chrome.  you would think for that kind of money, they would be color matched like the saddle bag hinge covers
Title: Re: What did you do to or on your CVO today?
Post by: SSTuner on April 18, 2016, 05:10:18 AM
I added Custom Dynamics under rear fender led light to my CVO Pro Street as the stock turn signals/brake light suck and unsafe due to lack of visibility.
Title: Re: What did you do to or on your CVO today?
Post by: bavery on April 18, 2016, 07:14:09 AM
Took delivery of my new FLTRUSE on Saturday. Too cold to ride any further than the dealer to home. Sunday - better. Got in a 75 mile ride including some parking lot time getting used to the new model (had and Ultra Classic previous) and the hydraulic clutch and much heavier bike. Love the RG. It behaved very well on the highway and along the ocean in some gusty winds. Cool enough that the heated seat and grips came in handy ;D.

Spent the rest of the day trying to figure out the GPS upgrade. The postings of others' experience on this forum was a great help. It still took hours and many attempts just to get it the bike to recognize the upgrade. Radio and GPS now upgraded, minor adjustments done (highway pegs, passenger boards etc.), manuals read and of course first waxing. Noting left to do now except ride and ride some more.
Title: Re: What did you do to or on your CVO today?
Post by: hrchdog on April 18, 2016, 01:57:38 PM
I dropped mine off at C&S Speed Shop to have Jason install GMR577 cams, lifters, pushrods then dyno tune!
Title: Re: What did you do to or on your CVO today?
Post by: Royalroadie on April 18, 2016, 09:13:52 PM
I added a zumo 660lm and the Harley handle bar mount.  It is a great mount that does not take away one of the windshield bags and you do not have to drill holes the inner fairing.
Title: Re: What did you do to or on your CVO today?
Post by: kiro on April 19, 2016, 08:16:57 AM
Finally got it out of winter storage in New Hampshire and did the first 100 miles of the new season. Outstanding ride and beat the rain...
Title: Re: What did you do to or on your CVO today?
Post by: RGlideKid on April 19, 2016, 06:48:50 PM
Removed the tank badges and cleaned it up good.  Waiting on the new tank badges to come in next week, but wanted the old ones off so I could just put the new ones on when they got here!
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on April 19, 2016, 10:17:14 PM
Put my favorite pipes on tonight. . Crusher Mellows!!
Title: Re: What did you do to or on your CVO today?
Post by: Roadblock on April 21, 2016, 11:48:19 PM
LED install
Title: Re: What did you do to or on your CVO today?
Post by: dayne66 on April 22, 2016, 12:24:46 AM
I added a zumo 660lm and the Harley handle bar mount.  It is a great mount that does not take away one of the windshield bags and you do not have to drill holes the inner fairing.
Did you go internal with the wiring?
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on April 22, 2016, 08:06:01 AM
LED install

I see you also installed the "spider man tires"....so sticky they will hang on ceilings.... :huepfenlol2:

Nice mood lighting on the scooter, by the way.

Image adjusted:
Title: Re: What did you do to or on your CVO today?
Post by: michaelokielee@yahoo.com on April 24, 2016, 04:08:08 PM
Tightened up some loose bolts I found causing an oil leak, where the exhaust bracket on lower right side of engine bolts on.  Got her all cleaned up to ride to Thunder Beach on Wednesday!! :orange:
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on April 24, 2016, 04:40:00 PM
Tightened up some loose bolts I found causing an oil leak, where the exhaust bracket on lower right side of engine bolts on.  Got her all cleaned up to ride to Thunder Beach on Wednesday!! :orange:


Exhaust bracket bolts have through holes to oil?  :-\
Title: Re: What did you do to or on your CVO today?
Post by: Bav on April 24, 2016, 04:42:00 PM

Exhaust bracket bolts have through holes to oil?  :-\


I thought they were blind?
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on April 24, 2016, 04:52:09 PM

I thought they were blind?

They are.  Can't get an oil leak from the holes that mount the exhaust brackets.  Can get leaks forward of that that run or blow back and collect there though.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on April 24, 2016, 07:39:19 PM
Went for a ride this morning....about 175 miles.  Rode Ca 94.  Click on this link and scroll about half way down the page....


  http://www.motofoto.us/Motorcycles/Hwy-94/04242016/






(https://farm2.staticflickr.com/1535/26558962911_9f3aab8e04_z.jpg)


Then I rode over to Coronado.  Hooked up with Miguel, his aunt & niece that are in town visiting.....we checked out all the cars at the car show....

(https://farm2.staticflickr.com/1460/26021007633_ef15fa49f7_c.jpg)


Miguel's Street Glide doesn't have a back seat so I gave Gloria, his cousin, her first ride on a Harley....her first ride on a motorcycle!  We rode down the Silver Strand and then over the Coronado bridge and back.  Stopped at Chicano Park to take this pic of her with the mural....

(https://farm2.staticflickr.com/1557/26598168156_9c12d924b3_c.jpg)


flip flops on a bike JC? Dunno about that SoCal lifestyle.
Title: Re: What did you do to or on your CVO today?
Post by: DCFIREMANN on April 24, 2016, 09:01:01 PM
Changed the injectors in my 14 SE Limited then smart tuned it.

Be Safe

THE DAWG
Title: Re: What did you do to or on your CVO today?
Post by: michaelokielee@yahoo.com on April 24, 2016, 10:30:20 PM

Exhaust bracket bolts have through holes to oil?  :-\
THEY ARE THE EXHAUST BRACKET HANGER BOLTS THAT GO THRU THE EXHAUST HANGER BRACKET AND PICK UP THE TWO BOTTOM BOLT HOLES IN THE TRANSMISSION ON THE RIGHT HAND SIDE
Title: Re: What did you do to or on your CVO today?
Post by: dayne66 on April 25, 2016, 10:29:16 AM
Finally got around to putting in the proper new garage door remote....wired in to an odometer reset push button switch in one of the switch blanks.
Title: Re: What did you do to or on your CVO today?
Post by: Royalroadie on April 25, 2016, 01:03:13 PM
Did you go internal with the wiring?

If you mean pulling the wire thru the inside of the bars, No.   The power wires are to big to do it that way it splits into about 4 different wire groups.  Power, intercom, headphone and command mic.  I just put them on the bottom of the handlebars and went in thru the left side handle bar grommet. 
Title: Re: What did you do to or on your CVO today?
Post by: OBB on April 25, 2016, 08:08:50 PM
If you mean pulling the wire thru the inside of the bars, No.   The power wires are to big to do it that way it splits into about 4 different wire groups.  Power, intercom, headphone and command mic.  I just put them on the bottom of the handlebars and went in thru the left side handle bar grommet. 
Don't know what bike you have but when I changed the bars on my '11 SERGU I had, I pulled the 660 wires out of the stock bars and fought like hell to get them through the new ones. I did manage to get it done though.
Title: Re: What did you do to or on your CVO today?
Post by: HUBBARD on April 26, 2016, 12:46:33 PM
Maybelle looks better with a Black Motor........to me, anyway.  Later--HUBBARD
Title: Re: What did you do to or on your CVO today?
Post by: HUBBARD on April 26, 2016, 12:48:50 PM
Chrome Inner Primary--hard to get past "Old School" ways!  Later--HUBBARD
Title: Re: What did you do to or on your CVO today?
Post by: HUBBARD on April 26, 2016, 12:58:37 PM
Not as much difference in the Borzilla, vs. the Fat-Cat, as in a few years back.  Later--HUBBARD 
Title: Re: What did you do to or on your CVO today?
Post by: HUBBARD on April 26, 2016, 01:06:59 PM
Got rid of that "Wind Splitter" Windshield, too.  It was like looking through a Carnival mirror......to me, anyway.  Put the original back on.   8)  Later--HUBBARD
Title: Re: What did you do to or on your CVO today?
Post by: OBB on April 26, 2016, 01:36:59 PM
Got rid of that "Wind Splitter" Windshield, too.  It was like looking through a Carnival mirror......to me, anyway.  Put the original back on.   8)  Later--HUBBARD
That has to be the best description I've ever read concerning the distortion on wind screens.
Title: Re: What did you do to or on your CVO today?
Post by: Rooster on April 26, 2016, 01:40:46 PM
LED install
Bike looks cool hanging from the ceiling :drink:
Title: Re: What did you do to or on your CVO today?
Post by: Royalroadie on April 26, 2016, 02:34:35 PM
Don't know what bike you have but when I changed the bars on my '11 SERGU I had, I pulled the 660 wires out of the stock bars and fought like hell to get them through the new ones. I did manage to get it done though.

Did you have the genuine Harley 660 or the off the shelf model.  My unit is not the Harley version and I would not even try to put that inside the bars.  I might want to change bikes someday.
Title: Re: What did you do to or on your CVO today?
Post by: RGlideKid on April 26, 2016, 03:05:22 PM
That has to be the best description I've ever read concerning the distortion on wind screens.

It's kinda scary when a carnival mirror makes some people look...better.   :o

I don't suppose it works that way with the landscape out in front of you when you're doing 70mph, though.
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on April 26, 2016, 04:29:02 PM
Maybelle looks better with a Black Motor........to me, anyway.  Later--HUBBARD
Chrome Inner Primary--hard to get past "Old School" ways!  Later--HUBBARD
Agree and agree... She's looking sweeeet!!!

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: OBB on April 26, 2016, 05:54:36 PM
Did you have the genuine Harley 660 or the off the shelf model.  My unit is not the Harley version and I would not even try to put that inside the bars.  I might want to change bikes someday.
Yup, it was the one that came on the bike. I know I have a pix of that disaster of wires but you've got a great point about moving it to your next bike. There is another "Y" or "splice" like the two you see in the pix also.
Title: Re: What did you do to or on your CVO today?
Post by: wrayzor on April 27, 2016, 03:44:07 AM
Sighs...just stared at pics of it on the computer as I am currently stationed in Korea. 5 more months before I come on mid-tour to ride it again.
Title: Re: What did you do to or on your CVO today?
Post by: DCFIREMANN on April 27, 2016, 07:38:51 AM
I'm going to ride at least one of mine today!!!!!!

Be Safe

THE DAWG
Title: Re: What did you do to or on your CVO today?
Post by: RGlideKid on April 27, 2016, 10:38:36 AM
I changed out the tank badges.  Got rid of the old lifeless, anemic, cheapazz badge in favor of one that screams CVO!
Title: Re: What did you do to or on your CVO today?
Post by: MrSurly on April 27, 2016, 11:36:59 AM
I changed out the tank badges.  Got rid of the old lifeless, anemic, cheapazz badge in favor of one that screams CVO!


I like that a lot!
Title: Re: What did you do to or on your CVO today?
Post by: dayne66 on April 27, 2016, 12:30:18 PM
Yup, it was the one that came on the bike. I know I have a pix of that disaster of wires but you've got a great point about moving it to your next bike. There is another "Y" or "splice" like the two you see in the pix also.
To get it installed internally...take it apart at the mount end and pull from the center to the grip.
Title: Re: What did you do to or on your CVO today?
Post by: bigchuck on April 27, 2016, 12:34:12 PM
Sighs...just stared at pics of it on the computer as I am currently stationed in Korea. 5 more months before I come on mid-tour to ride it again.

Just another sacrifice from our men and women in the U.S. armed forces. Thanks to you and all who serve.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on April 27, 2016, 12:49:10 PM
To get it installed internally...take it apart at the mount end and pull from the center to the grip.
Where was that advice two summers ago. Lol :beerchug:
Title: Re: What did you do to or on your CVO today?
Post by: Royalroadie on April 27, 2016, 04:50:38 PM
To get it installed internally...take it apart at the mount end and pull from the center to the grip.

Good Idea,  I do not even think of that being a possibility. It only took me about ten minutes to put the wires thru and synch them down.  I only have one zip tie that you can actually notice, the others are hidden by the mount and just inside the fairing opening for the handlebar.     I spent more time on getting the fairing apart and back together than it took to run the wires. 
Title: Re: What did you do to or on your CVO today?
Post by: Grizzly on April 28, 2016, 12:58:04 PM
I changed out the tank badges.  Got rid of the old lifeless, anemic, cheapazz badge in favor of one that screams CVO!

Very nice upgrade on the badge.  :2vrolijk_21:

Curious though how you managed to purchase the new ones as I thought they were only available to people who have the bikes that came with those badges.  :nixweiss:

Title: Re: What did you do to or on your CVO today?
Post by: AMEDD_SFC on April 28, 2016, 01:02:48 PM
I changed out the tank badges.  Got rid of the old lifeless, anemic, cheapazz badge in favor of one that screams CVO!

Nice.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on April 28, 2016, 06:14:42 PM
Very nice upgrade on the badge.  :2vrolijk_21:

Curious though how you managed to purchase the new ones as I thought they were only available to people who have the bikes that came with those badges.  :nixweiss:


Believe it or not, those are not vin protected or restricted parts. Anyone can buy them.
Title: Re: What did you do to or on your CVO today?
Post by: RGlideKid on April 28, 2016, 07:20:46 PM
Believe it or not, those are not vin protected or restricted parts. Anyone can buy them.

Mike's right.  Maybe at one time they were, but now it's different.  I bought them from Boardtracker HD in Wisconsin on line, and they never batted an eye.
If you haven't seen the pictures and the good conversations on the subject, go here:

http://www.cvoharley.com/smf/index.php?topic=107327.msg1378916#msg1378916
Title: Re: What did you do to or on your CVO today?
Post by: RoadMonkey on April 30, 2016, 03:02:33 PM
Mike's right.  Maybe at one time they were, but now it's different.  I bought them from Boardtracker HD in Wisconsin on line, and they never batted an eye.
If you haven't seen the pictures and the good conversations on the subject, go here:

http://www.cvoharley.com/smf/index.php?topic=107327.msg1378916#msg1378916
:2vrolijk_21: :2vrolijk_21: I changed to those same ones myself a few months ago. Local dealer had them in stock!
Title: Re: What did you do to or on your CVO today?
Post by: RoadMonkey on April 30, 2016, 03:09:40 PM
1328 miles round trip to Florida and back.. it's already too hot in the sunshine state :)
Title: Re: What did you do to or on your CVO today?
Post by: MrSurly on April 30, 2016, 08:59:56 PM
I rode yesterday 500miles dodging rain and hailstorms to the TX hill country to (our 10th annual ) meet up with about 40 friends and today led one of the groups on a ride on 335 & 337, Frio Canyon, the apple pie store, enjoying absolutely perfect weather!
You meet some of the coolest people on a Harley.


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on April 30, 2016, 10:40:10 PM
Added custom dynamics lighting. .
Title: Re: What did you do to or on your CVO today?
Post by: RoadMonkey on May 01, 2016, 07:08:17 PM
Spent the afternoon replacing the fork slide covers with black ones. That was fun. :) In process photo
Title: Re: What did you do to or on your CVO today?
Post by: RGlideKid on May 02, 2016, 03:48:51 PM
Swapped out the old shift linkage rod for a new one from Puzzled that says..."Screamin-Eagle".  Like you didn't know what it would say!   :P
Title: Re: What did you do to or on your CVO today?
Post by: turn_key on May 03, 2016, 02:45:30 PM
Added custom dynamics lighting. .
Me too :P
Title: Re: What did you do to or on your CVO today?
Post by: Smellymo on May 05, 2016, 12:23:56 AM
Today I did my 1k service. Replaced the HD SYN 3 with Mobil 1 20W50 VTwin motor oil and Redline Tranny and Primary fluids.
Why? Because I have gotten great results with these in the past on my last two bikes and they work for me. Would never claim they are better but I like the products. Funny but when I was younger I never worried about these things, I just rode em like I stole em and put whatever oil fluids that were handy. Can't remember any issues then either.  ;)
Title: Re: What did you do to or on your CVO today?
Post by: SSTuner on May 07, 2016, 06:26:47 AM
Installed Custom Dynamics "3rd Brake Light".
Title: Re: What did you do to or on your CVO today?
Post by: longlast on May 07, 2016, 04:26:18 PM
Stopped a trans. leak from the exhaust mount bolts,..sorry not the best focus pic.
Title: Re: What did you do to or on your CVO today?
Post by: 262 CVO 16 on May 07, 2016, 04:50:55 PM
Installed Passenger Floor Boards for the Mrs. - they look pretty good!
Title: Re: What did you do to or on your CVO today?
Post by: michaelokielee@yahoo.com on May 08, 2016, 05:22:22 PM
Stopped a trans. leak from the exhaust mount bolts,..sorry not the best focus pic.
I had to do the same a few weeks ago, backed them out one at a time and applied Loctite.  1500 miles and still no leaks. :orange: :orange:
Title: Re: What did you do to or on your CVO today?
Post by: RGlideKid on May 09, 2016, 05:42:41 PM
Finally got the left-side tank badge in and put it on.
You can also see the new shift linkage and the new horn bell with medallion in the photo.
Title: Re: What did you do to or on your CVO today?
Post by: michaelokielee@yahoo.com on May 09, 2016, 05:48:27 PM
Finally got the left-side tank badge in and put it on.
You can also see the new shift linkage and the new horn bell with medallion in the photo.
Looking damn good, nice ride!
Title: Re: What did you do to or on your CVO today?
Post by: RGlideKid on May 09, 2016, 06:04:14 PM
Looking damn good, nice ride!


Thanks, Michael!
Title: Re: What did you do to or on your CVO today?
Post by: Hnhcvo on May 09, 2016, 08:42:51 PM
Got my chin spoiler back from paint and mounted up. Liking how it fills the gap because of the rake (http://uploads.tapatalk-cdn.com/20160510/e5a274724f3004cb9fe4b7c814e91889.jpg)


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: grayghost731 on May 09, 2016, 08:44:38 PM
Look's  SICK!    :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Hnhcvo on May 09, 2016, 08:52:34 PM
Finally got the left-side tank badge in and put it on.
You can also see the new shift linkage and the new horn bell with medallion in the photo.
Lookin pretty badass
Title: Re: What did you do to or on your CVO today?
Post by: RGlideKid on May 09, 2016, 09:00:35 PM
Lookin pretty badass

Thanks!  Although I'd say mines just getting more to my liking, while your's has the badass look nailed!  Always did like the lines on the Skunk.
Title: Re: What did you do to or on your CVO today?
Post by: Hnhcvo on May 09, 2016, 09:09:53 PM
Look's  SICK!    :2vrolijk_21:
Thanks dude!!! Just when you think your done.... You get bored and start online searches haha
Title: Re: What did you do to or on your CVO today?
Post by: Hnhcvo on May 09, 2016, 09:12:25 PM
Thanks!  Although I'd say mines just getting more to my liking, while your's has the badass look nailed!  Always did like the lines on the Skunk.
Appreciate it man!! Fun to build .. Crappy to pay for haha
Title: Re: What did you do to or on your CVO today?
Post by: Gerhard on May 10, 2016, 04:22:15 AM
close to the 1.000 mls ... pit crew´s waiting  8)
Title: Re: What did you do to or on your CVO today?
Post by: Hnhcvo on May 11, 2016, 01:55:09 PM
Stretched (http://uploads.tapatalk-cdn.com/20160511/d3e20f6370667e8689a57b4c9b885f1a.jpg)Sidecovers showed up, little tweaking and they should be just right


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: MrSurly on May 11, 2016, 03:52:52 PM
Ordered some new lifters...sigh..
I put Woods "directionals" in it at last build, about 20K on them and intermittent valve train noise... and one of them will bleed down after a few days parked. Very frustrating! New S&S standards on the way.
Title: Re: What did you do to or on your CVO today?
Post by: dayne66 on May 11, 2016, 04:06:22 PM
I put a bunch of bugs on the front of my CVO today!
Title: Re: What did you do to or on your CVO today?
Post by: Nicky Pass on May 11, 2016, 06:32:11 PM
Wondered about it a little!  I'm still waiting...I doing 10" yaffe monkey bars, my new klockwerks fender painted by Joe at extreme, and legend rear air with fast air.  I dropped it off last Monday, knowing that the builder (DD Customs) was busy and said it may take 2-3 weeks...... :-\

The weather sucks in Chicago anyways...
Title: Re: What did you do to or on your CVO today?
Post by: turn_key on May 12, 2016, 10:01:47 PM
The weather sucks in Chicago anyways...

Got that right.. gave mine a bath when the sun finally came out.
Title: Re: What did you do to or on your CVO today?
Post by: Nicky Pass on May 13, 2016, 03:15:07 AM
Fender installed!
Title: Re: What did you do to or on your CVO today?
Post by: Nicky Pass on May 13, 2016, 03:16:56 AM
Air tank for the fast air with Legend Aero shocks....
Title: Re: What did you do to or on your CVO today?
Post by: Nicky Pass on May 13, 2016, 03:18:26 AM
10" Yaffe Monkey Bars....
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on May 13, 2016, 07:40:31 AM
10" Yaffe Monkey Bars....
looks great!
Title: Re: What did you do to or on your CVO today?
Post by: leeekeee on May 13, 2016, 08:18:11 AM
are you able to use the fairing mirrors with the 10"bars?
Title: Re: What did you do to or on your CVO today?
Post by: Nicky Pass on May 13, 2016, 09:48:38 AM
are you able to use the fairing mirrors with the 10"bars?

I haven't got it back yet, but the bike I sat on that made me pick 10"s you could use them, but you have to kind of lift your elbow.  I usually turn around quick when I change lanes...
Title: Re: What did you do to or on your CVO today?
Post by: Nicky Pass on May 13, 2016, 05:12:35 PM
All set....
I think I'm gonna pick it up tomorrow....
(http://i50.photobucket.com/albums/f340/NickyPass/image_zpslehl34cu.jpeg)
(http://i50.photobucket.com/albums/f340/NickyPass/image_zpsvlfvtgom.jpeg)
Title: Re: What did you do to or on your CVO today?
Post by: turn_key on May 13, 2016, 06:49:33 PM
Nick, it looks like you have the power duals header, what slip ons do you have? They look sharp and I might get a full system done next week and looking for input.
Title: Re: What did you do to or on your CVO today?
Post by: Nicky Pass on May 13, 2016, 07:16:15 PM
Nick, it looks like you have the power duals header, what slip ons do you have? They look sharp and I might get a full system done next week and looking for input.
I used the Rinehart 4" slip ons with chrome tip.  I love the sound!
Title: Re: What did you do to or on your CVO today?
Post by: turn_key on May 13, 2016, 08:34:48 PM
I used the Rinehart 4" slip ons with chrome tip.  I love the sound!

I have rineharts now with the black tips and i dont like how they look on my red/black cvo (they looked awesome on my last solid black limited). So i was thinking i might go with the full chrome v&h 4.5in HO, but i forgot I could just swap out the tips... thanks.
Title: Re: What did you do to or on your CVO today?
Post by: Nicky Pass on May 14, 2016, 09:44:26 AM
I have rineharts now with the black tips and i dont like how they look on my red/black cvo (they looked awesome on my last solid black limited). So i was thinking i might go with the full chrome v&h 4.5in HO, but i forgot I could just swap out the tips... thanks.

I prefer all one color when it comes to exhaust.  You can buy just the end caps in chrome, but they are like $150 I think.
Title: Re: What did you do to or on your CVO today?
Post by: kiro on May 14, 2016, 12:18:57 PM
Installed a 10" medium tint Freedom Shield...Nice!
Title: Re: What did you do to or on your CVO today?
Post by: Supershooter on May 15, 2016, 10:04:07 PM
I prefer all one color when it comes to exhaust.  You can buy just the end caps in chrome, but they are like $150 I think.

I put slash cut end caps on my Ultra, $89 online.
Supershooter
Title: Re: What did you do to or on your CVO today?
Post by: Royalroadie on May 15, 2016, 10:06:58 PM
I did my 10k service before I leave for the MITM in Eureka Springs.
Title: Re: What did you do to or on your CVO today?
Post by: REDMAN on May 16, 2016, 06:09:25 PM
I did my 10k service before I leave for the MITM in Eureka Springs.

FYI, That ride is in 2017...
Title: Re: What did you do to or on your CVO today?
Post by: Royalroadie on May 16, 2016, 06:16:03 PM
I stand corrected.  I change it for the NMITM get together. I see you are from MO are you coming down to Eureka this week?

Title: Re: What did you do to or on your CVO today?
Post by: REDMAN on May 17, 2016, 06:50:23 AM
I stand corrected.  I change it for the NMITM get together. I see you are from MO are you coming down to Eureka this week?
No, we won't be down to table rock lake until Memorial Day weekend. Have fun, ride safe.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on May 27, 2016, 06:42:40 AM
Getting ready to go to the dealer for the 36K service on the 2015.  I think she will end up needing new tires front and rear.  I also believe a new compensator as mine rattles like all get out.
Title: Re: What did you do to or on your CVO today?
Post by: JCZ on May 27, 2016, 07:15:19 AM
Heading out this morning for the first leg of the ride to the Redwoods GTG.  :bananarock:
Title: Re: What did you do to or on your CVO today?
Post by: OBB on May 27, 2016, 09:12:26 AM
Heading out this morning for the first leg of the ride to the Redwoods GTG.  :bananarock:
Wave when you go past the Seaside area. We're taking the rental back to Mountain View this morning.
Title: Re: What did you do to or on your CVO today?
Post by: JCZ on May 27, 2016, 10:12:40 AM
Wave when you go past the Seaside area. We're taking the rental back to Mountain View this morning.

We're spending the night in Camarillo tonight.  We'll be up in the Mountain View area tomorrow evening.  You still going to be in the area tomorrow evening?
Title: Re: What did you do to or on your CVO today?
Post by: OBB on May 27, 2016, 10:35:33 AM
We're spending the night in Camarillo tonight.  We'll be up in the Mountain View area tomorrow evening.  You still going to be in the area tomorrow evening?
Sorry to say but no. Our flight out tomorrow is a noon.
Title: Re: What did you do to or on your CVO today?
Post by: DesertHOG on May 27, 2016, 06:24:30 PM
Took my 2015 Burgundy Blaze/Typhoon Maroon to the dealer today for him to sell.
Still got one Harley in the garage, my 2009 Galaxy Glide.

(http://i743.photobucket.com/albums/xx76/DesertHOG/Sturgis%202011/Girls/IMG_3224.jpg)

(http://i743.photobucket.com/albums/xx76/DesertHOG/Sturgis%202011/Girls/IMG_3328.jpg)

DH
Title: Re: What did you do to or on your CVO today?
Post by: Trapperdog on May 27, 2016, 11:00:21 PM
Trade it for the Blond...
Title: Re: What did you do to or on your CVO today?
Post by: DesertHOG on May 27, 2016, 11:04:58 PM
Trade it for the Blond...


I'd ask which one but I already know the answer is either;

ALL THREE or
WHO CARES

Title: Re: What did you do to or on your CVO today?
Post by: JCZ on May 28, 2016, 12:02:59 AM
We stopped by the Rock Store and rode The Snake.  :bananarock:
Title: Re: What did you do to or on your CVO today?
Post by: Grizzly on May 29, 2016, 12:19:28 AM
Took my 2015 Burgundy Blaze/Typhoon Maroon to the dealer today for him to sell.
Still got one Harley in the garage, my 2009 Galaxy Glide.

(http://i743.photobucket.com/albums/xx76/DesertHOG/Sturgis%202011/Girls/IMG_3224.jpg)

(http://i743.photobucket.com/albums/xx76/DesertHOG/Sturgis%202011/Girls/IMG_3328.jpg)

DH

Good move, 'cause that one looks more of a magnet anyway!  ;D
Title: Re: What did you do to or on your CVO today?
Post by: MrSurly on May 29, 2016, 11:12:55 AM
Replaced the stripped belt (sigh...again) while in there I modified the Bandit clutch a bit, improving its friction zone.
Rode around a while, a little data logging.



Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Smellymo on May 29, 2016, 05:55:53 PM
About 125 miles through the local mountains on a gorgeous day.
Title: Re: What did you do to or on your CVO today?
Post by: 110tHunDer on May 29, 2016, 09:21:50 PM
Put 150 on the old 2000 SERG today.  Rode down to Springfield to watch the Mile.  First time in 3 or 4 years.  The races were good and that bike is still such a sweet ride!  Guy who parked next to me with a later model Road King complimented me on it.  Said, "I really like what you've done to it."  I didn't tell him it was 99% stock. ::)
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on May 29, 2016, 10:47:32 PM
Even better. . . I'm kinda liking the road glide more and more too. . Glad you had a great day.  Stuart  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Hnhcvo on May 31, 2016, 02:22:58 PM
Custom floorboards from Jesse Rooke pumped on these bad boys (http://uploads.tapatalk-cdn.com/20160531/9a3f871fe32fe86abfbee601b26347a0.jpg)


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: turn_key on May 31, 2016, 02:42:16 PM
Those are badass!
Title: Re: What did you do to or on your CVO today?
Post by: Scooter127 on June 01, 2016, 09:34:57 AM
Last night I replaced the throttle-side heated grip on my 2016 FLTRUSE.  Why?  Because I'm a dumbass and dropped the bike to the left.....then did the classic "lifted it too far" and it went over hard.  Oopsies.  $135 for the single grip.

If anyone ever has to replace their grip on a 2016 FLTRUSE, the electrical connector is inside the grip waaaay at the bottom.  The chrome cap on the end pops off so after putting the grip on the bars you can use needle nose pliers to plug in the connector.  Took me a while to figure that out since there were no instructions and I don't have the service manual.

Title: Re: What did you do to or on your CVO today?
Post by: ematicic on June 01, 2016, 11:01:58 AM
Went South West and rode the BRP back up and half way up Skyline Drive over the long weekend. I was surprised that a large chunk of Skyline Drive was burnt from a recent fire.
Title: Re: What did you do to or on your CVO today?
Post by: longlast on June 01, 2016, 02:03:59 PM
Custom floorboards from Jesse Rooke pumped on these bad boys (http://uploads.tapatalk-cdn.com/20160531/9a3f871fe32fe86abfbee601b26347a0.jpg)


Sent from my iPhone using Tapatalk

That will stop you riding bare foot ;D They are wild :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Hnhcvo on June 01, 2016, 05:52:03 PM
That will stop you riding bare foot ;D They are wild :2vrolijk_21:
Hahaha. Ya they will!! And the stretched rear showed up from paint today as well (http://uploads.tapatalk-cdn.com/20160601/0eb7999d103fdb60e906a4277e697c56.jpg)


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on June 01, 2016, 06:18:01 PM
Don't you love it when you can find something under 35.00 to put a smile on your face? .  Banjo covers  ;D
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on June 02, 2016, 07:29:53 AM
Well yesterday I was headed home on HWY 305, was just getting back in my lane from passing a logging truck.  Just as I was completing the pass at 70 mph I hit a buzzard on the left side of the fairing, then my clutch, mirror and my left hand.  My mirrors are not stock and are thin and sharp.  Cut the buzzard open good enough to get his guts all over my tour pack speakers, back rest and so on.  I little got on my hand but no where else on me.

Sprayed the guts off yesterday.  This morning it will get a detailed cleaning and inspection to make sure no damage, but there was noting I saw yesterday.
Title: Re: What did you do to or on your CVO today?
Post by: Mandrew13 on June 02, 2016, 07:52:20 AM
Well yesterday I was headed home on HWY 305, was just getting back in my lane from passing a logging truck.  Just as I was completing the pass at 70 mph I hit a buzzard on the left side of the fairing, then my clutch, mirror and my left hand.  My mirrors are not stock and are thin and sharp.  Cut the buzzard open good enough to get his guts all over my tour pack speakers, back rest and so on.  I little got on my hand but no where else on me.

Sprayed the guts off yesterday.  This morning it will get a detailed cleaning and inspection to make sure no damage, but there was noting I saw yesterday.

No ride is complete without slicing buzzard guts on your bike, right?

Title: Re: What did you do to or on your CVO today?
Post by: BigLew on June 02, 2016, 09:21:00 AM
Hahaha. Ya they will!! And the stretched rear showed up from paint today as well (http://uploads.tapatalk-cdn.com/20160601/0eb7999d103fdb60e906a4277e697c56.jpg)


Sent from my iPhone using Tapatalk
That is some interesting exhaust pipes there!

BigLew
Title: Re: What did you do to or on your CVO today?
Post by: Hnhcvo on June 02, 2016, 09:24:25 AM
That is some interesting exhaust pipes there!

BigLew
Ya, the big openings didn't look right to me so I got creative and thought I'd try the double dual, (http://uploads.tapatalk-cdn.com/20160602/777ed79d5a282692586bbc71c2e81fd2.jpg)


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: grandpadoc on June 02, 2016, 10:38:04 AM
Memorial Day Celebration at our local cemetery.
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on June 03, 2016, 01:17:43 AM
Ya, the big openings didn't look right to me so I got creative and thought I'd try the double dual, (http://uploads.tapatalk-cdn.com/20160602/777ed79d5a282692586bbc71c2e81fd2.jpg)


Sent from my iPhone using Tapatalk
Very unique, love it!
Title: Re: What did you do to or on your CVO today?
Post by: Mr. Warlock on June 03, 2016, 06:46:29 AM
Don't you love it when you can find something under 35.00 to put a smile on your face? .  Banjo covers  ;D

Where did you find these Stu ?

Title: Re: What did you do to or on your CVO today?
Post by: Mr. Warlock on June 03, 2016, 07:11:18 AM
Where did you find these Stu ?
Never mind, I found, HD parts. Sometimes certain things look too good to think they're just HD parts, lol.
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on June 03, 2016, 06:15:21 PM
Yes. . In the parts catalog. . I really like them. .  Stuart
Title: Re: What did you do to or on your CVO today?
Post by: turn_key on June 03, 2016, 11:35:58 PM
Chrome tips, V&H power duals, and dyno.
Title: Re: What did you do to or on your CVO today?
Post by: Rooster on June 03, 2016, 11:38:09 PM
Nice and shiny. Looks like they say Rinehart on them.
Title: Re: What did you do to or on your CVO today?
Post by: turn_key on June 03, 2016, 11:58:10 PM
Yes they are Rineharts. I had these on my last ultra and the black tips didn't look as nice on my cvo so I swapped them out.
Title: Re: What did you do to or on your CVO today?
Post by: Nicky Pass on June 04, 2016, 07:56:21 AM
Chrome tips, V&H power duals, and dyno.

It live 5 minutes from there.  I've never seen a red CVO Street Glide!
Title: Re: What did you do to or on your CVO today?
Post by: Nicky Pass on June 04, 2016, 02:13:39 PM
I broke out mama's hair dryer and beat up my fingernails to take off the fork reflectors!  I really cleans up the front end!
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on June 04, 2016, 02:16:56 PM
Next time try goo gone and some fishing line. . . Stuart
Title: Re: What did you do to or on your CVO today?
Post by: Nicky Pass on June 04, 2016, 02:24:03 PM
Next time try goo gone and some fishing line. . . Stuart

I soaked it with goo gone....one of the reflectors actually broke! 
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on June 04, 2016, 03:19:41 PM
You wanted them off anyway. .  :P
Title: Re: What did you do to or on your CVO today?
Post by: turn_key on June 04, 2016, 08:44:03 PM
It live 5 minutes from there.  I've never seen a red CVO Street Glide!

I'm close to ohare in the city. I have the black/red limited. My buddies have the red flame and white/black flame street glides. If you see any of those bikes, they're probably ours. We're always at chicago harley paying our required $100 a month "need to buy something that says harley on it" fee.
Title: Re: What did you do to or on your CVO today?
Post by: 68 XLCH on June 04, 2016, 09:11:54 PM
(http://i203.photobucket.com/albums/aa32/ES345/No%20relfectoris_zpsh6dlqcqi.jpeg)


Nice Nick, I'm going to think about it.
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on June 04, 2016, 10:09:31 PM
Was a gorgeous day here today so took the SERK on about a 200 mile round trip for a nice Saturday lunch.  Love riding the Road King. 

Then got home and mowed the yard. 

Then took the SERG for about a 150 mile round trip riding home away from the sunset with my shadow bike riding in lane half with me.  Love riding the Road Glide.

It was a good day.
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on June 04, 2016, 10:23:56 PM
Sounds like a great day Don. .  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Nicky Pass on June 04, 2016, 10:57:40 PM
I'm close to ohare in the city. I have the black/red limited. My buddies have the red flame and white/black flame street glides. If you see any of those bikes, they're probably ours. We're always at chicago harley paying our required $100 a month "need to buy something that says harley on it" fee.

My in laws live off of Pfingston....so I stop there to "look"!
Title: Re: What did you do to or on your CVO today?
Post by: turn_key on June 05, 2016, 09:43:56 AM
My in laws live off of Pfingston....so I stop there to "look"!

That's a nice area, and love riding that way. Sometimes we will snake north and take 120 west through lake county. We also take the scenic route up to Woodstock Harley. I'm sure I've been down Pfingston to make my way south to lake st, greenwood, or lehigh, to head back south. 294 gets backed up by ohare and I hate stop and go.
Title: Re: What did you do to or on your CVO today?
Post by: Nicky Pass on June 05, 2016, 10:00:31 AM
That's a nice area, and love riding that way. Sometimes we will snake north and take 120 west through lake county. We also take the scenic route up to Woodstock Harley. I'm sure I've been down Pfingston to make my way south to lake st, greenwood, or lehigh, to head back south. 294 gets backed up by ohare and I hate stop and go.

I like going up Rt. 12 and go to wauconda....or 120.
Title: Re: What did you do to or on your CVO today?
Post by: DALE#3 on June 05, 2016, 12:29:43 PM
Matched them up...Yup,Perfect garage partner
(http://i288.photobucket.com/albums/ll171/Dei3and8/20160519_181936_001.jpg) (http://s288.photobucket.com/user/Dei3and8/media/20160519_181936_001.jpg.html)
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on June 05, 2016, 06:54:12 PM
Matched them up...Yup,Perfect garage partner
(http://i288.photobucket.com/albums/ll171/Dei3and8/20160519_181936_001.jpg) (http://s288.photobucket.com/user/Dei3and8/media/20160519_181936_001.jpg.html)
American dream there...
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on June 05, 2016, 07:03:29 PM
took momma for a lill 200 mile put...and thinking of how im going to get paint spatter off the back of it, looks like i ran through some green paint some where  :confused5: its up the rear fender, bags & tourpac
Title: Re: What did you do to or on your CVO today?
Post by: Sierramadre on June 06, 2016, 11:12:10 AM
Added a Custom Dynamic led light bar under the rear fender.  Its a new product from them and is a perfect fit.  Works as a a running light, brake light, and turn signal.
Title: What did you do to or on your CVO today?
Post by: MrSurly on June 06, 2016, 03:33:35 PM
Well....

(http://uploads.tapatalk-cdn.com/20160606/90f5d9d3fcde6dc777a94d1ae6a89492.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: OBB on June 06, 2016, 06:42:57 PM
Well....

(http://uploads.tapatalk-cdn.com/20160606/90f5d9d3fcde6dc777a94d1ae6a89492.jpg)
That's normal, They ALL do that  :P
Title: Re: What did you do to or on your CVO today?
Post by: MIKEYTEE on June 06, 2016, 08:32:04 PM
Today I started the tare down of the exhaust system to replace the pipes damaged in my Tennessee mishap. Hogasm gave me the pipes he had taken off of Kathy's bike. I picked them up in Richmond during Memorial Weekend. I will reuse the mufflers and shark fins from my pipes. I am also replacing the worn out speakers with Hog Tunes replacement speakers and grills, both front and rear. While I have her torn down I will give her a good Dick W cleaning. I need to have her up and running for West Virginia next month. Not doing too much to her until after MV. The unveiling will be at The NMITM in Eureka Springs next June.
Mike
 :drink:


Title: Re: What did you do to or on your CVO today?
Post by: PeterJ on June 08, 2016, 10:10:20 PM
Fitted highway pegs I can now stretch out. Poor quality pic
I like to have my heel on the foot plates and my boot front on the pegs. That's why the pegs are fitted low down.  I can still rest my whole foot on the highway pegs if I want to.
Title: Re: What did you do to or on your CVO today?
Post by: PeterJ on June 08, 2016, 10:13:46 PM
The other side
Title: Re: What did you do to or on your CVO today?
Post by: Hnhcvo on June 09, 2016, 08:50:51 PM
Sidecovers done and off to get striped. Finally think I'm done.... For this year at least lol (http://uploads.tapatalk-cdn.com/20160610/4c9e58ec99e6acc86e97868d493d460d.jpg)


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Kingspoke on June 10, 2016, 03:52:34 AM
Upgraded the lifters, push rods, and cam bearings to S&S.  I also had the cam swapped out to SE 585.
Title: Re: What did you do to or on your CVO today?
Post by: Hnhcvo on June 10, 2016, 03:36:08 PM
Got the side covers on...Installed. That's it. Game over lol. Now time to sell Hahahaha(http://uploads.tapatalk-cdn.com/20160610/5972fdbe39377fbc5ebf4f1b81ec392a.jpg)(http://uploads.tapatalk-cdn.com/20160610/094e88f1e555443e3d2eb2fd2b40268f.jpg)(http://uploads.tapatalk-cdn.com/20160610/2a8582c6ff0434db15601134bda35280.jpg)


Sent from my iPhone using Tapatalk


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: TN on June 10, 2016, 04:07:22 PM
rode the bitch.  :pineapple:




TN
Title: Re: What did you do to or on your CVO today?
Post by: wrayzor on June 11, 2016, 04:44:03 AM
Got the side covers on...Installed. That's it. Game over lol. Now time to sell Hahahaha(http://uploads.tapatalk-cdn.com/20160610/094e88f1e555443e3d2eb2fd2b40268f.jpg)

That your Ram? Looks nice with the bike!
Title: Re: What did you do to or on your CVO today?
Post by: Hnhcvo on June 11, 2016, 07:38:42 AM
That your Ram? Looks nice with the bike!
Yessir thanks


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Nicky Pass on June 11, 2016, 10:16:02 AM
I ordered a Lepera Silouhette that we customized with alcantera seating area with silver diamond stitching....I get it in 3 weeks.
Title: Re: What did you do to or on your CVO today?
Post by: TN on June 11, 2016, 01:43:39 PM
Rode the bitch again.  :pineapple:

Doing my shakedown rides after installing rocker lockers, had witness marks on two bolts. Real world experience is WOW, why did I wait this long to try them.  http://www.rockout.biz/

A simple cure for a very specific tick, best $15 I've spent in a long time.


Ride On


TN
Title: Re: What did you do to or on your CVO today?
Post by: SneakyPete on June 11, 2016, 08:57:10 PM

A simple cure for a very specific tick, best $15 I've spent in a long time.


Ride On


TN

Better than the duck tape grips?
Title: Re: What did you do to or on your CVO today?
Post by: TN on June 11, 2016, 09:02:55 PM
Better than the duck tape grips?

I'm gonna bust yer ass with a almost bone stock 110". 


 :trailer:


TN


I guess I'd win by default right now........ :drink:
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on June 12, 2016, 08:03:55 PM
I gave it a bath this morning to remove some of the Tennessee bugs we've been killing,  then we went out and killed some more   :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on June 12, 2016, 10:52:23 PM
I gave it a bath this morning to remove some of the Tennessee bugs we've been killing,  then we went out and killed some more   :2vrolijk_21:

I skipped the bath part this morning.  Knocked out the second part though.  Twice  :2vrolijk_21: .
Title: Re: What did you do to or on your CVO today?
Post by: TNCarters on June 14, 2016, 07:33:13 PM
Nothing really major this month.  My second factory tank badge came loose so took both off and replaced with the Street Glide Eagle Head badge.  Also front tire was singing to me at about 60 mph after just 13000 miles so changed it out for a Michelin Commander II.  Rear is beginning to cup and whine when cornering so will change it later this summer.  Attached badge pic:
Title: Re: What did you do to or on your CVO today?
Post by: Kingspoke on June 14, 2016, 07:53:21 PM
Nothing really major this month.  My second factory tank badge came loose so took both off and replaced with the Street Glide Eagle Head badge.  Also front tire was singing to me at about 60 mph after just 13000 miles so changed it out for a Michelin Commander II.  Rear is beginning to cup and whine when cornering so will change it later this summer.  Attached badge pic:

Looks really good on your bike! :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: OBB on June 14, 2016, 07:58:37 PM
Not a damn thing. It's still in the shop getting the water pump replaced under warranty  >:(
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on June 14, 2016, 08:09:09 PM
Not a damn thing. It's still in the shop getting the water pump replaced under warranty  >:(

Sorry to hear the scooter is feeling poorly Mike. You will have it back in no time....

Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on June 14, 2016, 08:13:32 PM
Since I got the Road King in 14, Ol Betsy has been feeling very neglected, sitting in at my office basically collecting dust. So I drug her out and stretched her legs for a few miles after work.
Title: Re: What did you do to or on your CVO today?
Post by: stripclub on June 14, 2016, 08:36:28 PM
I cleaned all the dead bugs off and waxed it




Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: OBB on June 14, 2016, 08:38:23 PM
I cleaned all the dead bugs off and waxed it




Sent from my iPhone using Tapatalk
But did you pull the side covers and get in there with q-tips?  ;)
Title: Re: What did you do to or on your CVO today?
Post by: stripclub on June 14, 2016, 08:38:46 PM
Not a damn thing. It's still in the shop getting the water pump replaced under warranty  >:(
Damn Mike you better get it back before the ride down to my house, or you will be driving that shinny blue cage you got.


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: stripclub on June 14, 2016, 08:39:38 PM
But did you pull the side covers and get in there with q-tips?  ;)
No that's high maintenance job. Lol


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: OBB on June 14, 2016, 09:40:10 PM
Damn Mike you better get it back before the ride down to my house, or you will be driving that shinny blue cage you got.


Sent from my iPhone using Tapatalk
They're supposed to get the new pump any day. Tell HM I'll be doing a white glove inspect on your bike. lol  ;D
Title: Re: What did you do to or on your CVO today?
Post by: 4fun on June 17, 2016, 05:38:45 PM
Installed a coin on the horn that I picked up at Americade and also installed the Screaming Eagle shift linkage that I got from Puzzled.

Sent from my SM-G900V using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: OBB on June 17, 2016, 08:53:00 PM
Picked it up today with it's new water pump. My dealer managed to get one from another dealer that didn't want to let it go because of a huge back order on them. That dealer owed my dealer a big favor.
Title: Re: What did you do to or on your CVO today?
Post by: rjammo on June 23, 2016, 11:07:51 AM
Installed S&S Power Tune Duals head pipe this week. Looks good, sounds great - a bit louder than the OEM pipe during WOT (tested extensively - I tried to explain to the wife the next few rides would be a bit louder and aggressive as I'm also using the auto tune feature with the FP3, yet she's not buying it). At idle it's more "throaty" and the exhaust flows evenly through both sides.
Title: Re: What did you do to or on your CVO today?
Post by: Supershooter on June 26, 2016, 09:19:19 PM
Past, Present, Future,
This past winter I had the local dealer put new bars on, on the way home I noticed a small drip, I wasn't sure if it was water or oil. Last week we rode to the Black Hills, on our way out my bike ran out of Dot 4 fluid in the clutch, do to a fitting not getting tight, $320 and 17 hrs later we back on two wheels. Had a great weekend in the Hills.
Took it back to the dealer to get a service done, radio worked on, led light wired. And discuss the leak.
Service manager calls, speakers blown out and amp is bad, ESP will cover,
I've also noticed that by bike runs plenty warm with the new DX pipe and TTS tune, Anybody else have this issue?
The bike should be buttoned up later this week before we leave for a loop through SD, WY, MT, ID, WA, and OR.
Supershooter
Title: Re: What did you do to or on your CVO today?
Post by: GRam on July 05, 2016, 08:38:23 PM
Found oil spatter under both jugs, so ESP is covering that. Figured "hey, while the jugs are up in the air…"
So took the opportunity to order the 117 piston/jug kit. Hoping it plays nice with the goodies I have in place already!  :carrot:
Title: Re: What did you do to or on your CVO today?
Post by: wtfdskin on July 05, 2016, 09:54:45 PM
New to me bike as of friday. Took off heel shifter, lowered highway pegs to suit my long legs, stared at it while I wasn't riding. Heading to dealership tomorrow for a shifter spacer and check any open recalls. 
Title: Re: What did you do to or on your CVO today?
Post by: HUBBARD on July 06, 2016, 12:21:01 PM
Covered up the Muffler Brackets.  Not a perfect fit, but looks better than it was.  Later--HUBBARD
Title: Re: What did you do to or on your CVO today?
Post by: Nicky Pass on July 07, 2016, 07:58:24 PM
I finally got my LePera Silouhette!
On the bike!
(http://i50.photobucket.com/albums/f340/NickyPass/2815A814-828E-4178-8B23-275536ED8E60_zpsov5h2vnc.jpg) (http://s50.photobucket.com/user/NickyPass/media/2815A814-828E-4178-8B23-275536ED8E60_zpsov5h2vnc.jpg.html)

(http://i50.photobucket.com/albums/f340/NickyPass/003E958E-934A-43FC-BBF4-4444CB2F90C3_zpszjo6qiei.jpg) (http://s50.photobucket.com/user/NickyPass/media/003E958E-934A-43FC-BBF4-4444CB2F90C3_zpszjo6qiei.jpg.html)

Slammed as low as she can go!
(http://i50.photobucket.com/albums/f340/NickyPass/13E8FFCC-F2E7-4E64-B5ED-E646C529A9D7_zpsfdo1k5fl.jpg) (http://s50.photobucket.com/user/NickyPass/media/13E8FFCC-F2E7-4E64-B5ED-E646C529A9D7_zpsfdo1k5fl.jpg.html)
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on July 07, 2016, 08:02:38 PM
Got me a new seat today and got it installed. Also changed the fluids in anticipation of the upcoming GTG
Title: Re: What did you do to or on your CVO today?
Post by: wtfdskin on July 07, 2016, 08:37:03 PM
Installed HD Sundowner seat with removable rider backrest. Seems more comfy than stock cvo seat but backrest is not as nice as my Mustang was on my softail. Its raining so will have to wait to test ride
Title: Re: What did you do to or on your CVO today?
Post by: SneakyPete on July 07, 2016, 08:39:25 PM
Covered up the Muffler Brackets.  Not a perfect fit, but looks better than it was.  Later--HUBBARD
That's the way they are supposed to look. What doesn't fit right?

Sent from my SM-G920V using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: BostonboyDH on July 08, 2016, 03:33:17 PM
I finally got my LePera Silouhette!
On the bike!
(http://i50.photobucket.com/albums/f340/NickyPass/2815A814-828E-4178-8B23-275536ED8E60_zpsov5h2vnc.jpg) (http://s50.photobucket.com/user/NickyPass/media/2815A814-828E-4178-8B23-275536ED8E60_zpsov5h2vnc.jpg.html)

(http://i50.photobucket.com/albums/f340/NickyPass/003E958E-934A-43FC-BBF4-4444CB2F90C3_zpszjo6qiei.jpg) (http://s50.photobucket.com/user/NickyPass/media/003E958E-934A-43FC-BBF4-4444CB2F90C3_zpszjo6qiei.jpg.html)

Slammed as low as she can go!
(http://i50.photobucket.com/albums/f340/NickyPass/13E8FFCC-F2E7-4E64-B5ED-E646C529A9D7_zpsfdo1k5fl.jpg) (http://s50.photobucket.com/user/NickyPass/media/13E8FFCC-F2E7-4E64-B5ED-E646C529A9D7_zpsfdo1k5fl.jpg.html)

  Looks Great  :2vrolijk_21:....BostonBoy
Title: Re: What did you do to or on your CVO today?
Post by: HUBBARD on July 08, 2016, 03:33:34 PM
That's the way they are supposed to look. What doesn't fit right?

Sent from my SM-G920V using Tapatalk

Looked better this mornin'.  Later--HUBBARD
Title: Re: What did you do to or on your CVO today?
Post by: TN on July 08, 2016, 07:27:00 PM
Rode her hard, then I rode some more.

Needed an elevation change.  :pineapple:


TN

Title: Re: What did you do to or on your CVO today?
Post by: Kingspoke on July 08, 2016, 08:06:19 PM
Had the American Elite installed on the rear (180-65B-16) with 90 degree valve stem (HD 42300046).  Rides much nicer and easier to air up! :2vrolijk_21: 
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on July 08, 2016, 08:13:18 PM
Rode her hard, then I rode some more.

Needed an elevation change.  :pineapple:


TN

You lucky devil!!!
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on July 08, 2016, 08:30:54 PM
Cleaned it.  Rode it.  About 1 1/2 tanks worth.  Wiped it down.  Then broke out the tools to accomplish a tough task for both bikes.  Broke a sweat.  Changing the batteries in the alarm fobs.  Beer o'clock now.
Title: Re: What did you do to or on your CVO today?
Post by: 110tHunDer on July 08, 2016, 08:40:29 PM
Thanks for the reminder on the fob batteries. Bought a new set a few weeks ago, got busy after I got home and never put them in.  Going to do, now ...
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on July 08, 2016, 08:44:24 PM
Thanks for the reminder on the fob batteries. Bought a new set a few weeks ago, got busy after I got home and never put them in.  Going to do, now ...

I try to stay ahead of those stupid things.  On my old bikes they last better than they do on the newer ones.  But I'd still rather change while they're still working than find myself out somewhere and have to hope I can remember the handlebar method.  For me fob batteries are a reminder in my calendar for July every year.  So go change yours and earn yourself a beer too  :drink: :2vrolijk_21: !
Title: Re: What did you do to or on your CVO today?
Post by: 110tHunDer on July 08, 2016, 08:47:07 PM
Yes!  My reminder is Memorial Day (start of summer).  So, I bought them around that time, but then promptly forgot to install.  ::)
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on July 08, 2016, 08:50:33 PM
Yes!  My reminder is Memorial Day (start of summer).  So, I bought them around that time, but then promptly forgot to install.  ::)

That makes more sense.  I should just do them as part of the spring service each year when everything is readied for the year.  Oh well, the cold congratulatory beer is better in July than in early spring....
Title: Re: What did you do to or on your CVO today?
Post by: MIKEYTEE on July 08, 2016, 08:53:45 PM
I don't have a key fob. I did change the motor guard and reinstalled the lowers and highway pegs. She is all clean ( including the battery box and battery ), tuned, fluids changed ( including fork oil ), and ready for WV trip. The trailer is waiting to be loaded and hauled to WV. Do I get to have a bourbon?
Mike
 :drink:
Title: Re: What did you do to or on your CVO today?
Post by: 110tHunDer on July 08, 2016, 08:57:30 PM
Hell, yes, Mikey!  Wish I could have one with ya!
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on July 08, 2016, 10:26:18 PM
Hell, yes, Mikey!  Wish I could have one with ya!


Oh hell yes Mikey; what 103 said ^^  :drink: :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on July 08, 2016, 10:27:13 PM

Oh hell yes Mikey; what 103 said ^^  :drink: :2vrolijk_21:


Ah chit, after all this time I still get wrong.  110.  Geez.......  :oops: :huepfenlol2:
Title: Re: What did you do to or on your CVO today?
Post by: OBB on July 08, 2016, 10:30:17 PM
Ah chit, after all this time I still get wrong.  110.  Geez.......  :oops: :huepfenlol2:

I think Tommy influenced you in the other thread where he referred to Brian as 103. But then again, as many times as he's changed his name, it's easy to get confused.  :confused5:
Title: Re: What did you do to or on your CVO today?
Post by: 110tHunDer on July 08, 2016, 10:48:13 PM
 :huepfenlol2: :huepfenlol2: :huepfenlol2:

Just to set the record straight, I've only changed my name twice!  Tommy, on the other hand, has gone from 04hd103 to 07hd110 to 11hd110 to 16hd110 to 16hd117.  :rolleyes4: :huh2: :love_1: :vrolijk27: :end: :alcohol:
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on July 08, 2016, 11:06:36 PM
:huepfenlol2: :huepfenlol2: :huepfenlol2:

Just to set the record straight, I've only changed my name twice!  Tommy, on the other hand, has gone from 04hd103 to 07hd110 to 11hd110 to 16hd110 to 16hd117.  :rolleyes4: :huh2: :love_1: :vrolijk27: :end: :alcohol:


I know, I don't even try to keep track with Tommy.  It's like he just can't commit to anything!  :huepfenlol2:
Title: Re: What did you do to or on your CVO today?
Post by: OBB on July 09, 2016, 06:07:20 AM
:huepfenlol2: :huepfenlol2: :huepfenlol2:

Just to set the record straight, I've only changed my name twice!  Tommy, on the other hand, has gone from 04hd103 to 07hd110 to 11hd110 to 16hd110 to 16hd117.  :rolleyes4: :huh2: :love_1: :vrolijk27: :end: :alcohol:
That's who I was referring to. I wasn't about to go back and try to find all his names. :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on July 09, 2016, 10:07:43 AM
:huepfenlol2: :huepfenlol2: :huepfenlol2:

Just to set the record straight, I've only changed my name twice!  Tommy, on the other hand, has gone from 04hd103 to 07hd110 to 11hd110 to 16hd110 to 16hd117.  :rolleyes4: :huh2: :love_1: :vrolijk27: :end: :alcohol:

I just realized I might have had two cite names also. Or at least the same name two different times both before and after I was permanently kicked off the site never to return and banished to hell. Does that count as two names?  :huepfenlol2:
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on July 09, 2016, 10:27:24 AM
Reading the above, I am on my second site name. The first one was one I've carried for years and still use on ebay.  It just doesn't fit me anymore.

As for the topic. Today?  I'm back on Beauregard for the first time since May 23 when I messed up my bicep. Boy, I sure missed riding. The old adage you don't miss something until it's gone comes to mind. Praise the Lord my healing is near complete so I'm back in the saddle.....WHOOPEE!
Title: Re: What did you do to or on your CVO today?
Post by: spook120 on July 09, 2016, 10:58:18 AM
What did I do with my CVO today?  Sold it. 
Title: Re: What did you do to or on your CVO today?
Post by: Nicky Pass on July 09, 2016, 12:28:54 PM
What did I do with my CVO today?  Sold it.

How much did you get?
Title: Re: What did you do to or on your CVO today?
Post by: spook120 on July 09, 2016, 05:15:25 PM
30k with no warranty in place.
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on July 09, 2016, 10:15:32 PM
Rode with some friends down to Freebournes near Laurel Springs, NC then to North Wilksboro then Boone and back to Bluefield. Rode several roads that we will riding during the WV GTG. Great day to ride around here for a change.
Title: Re: What did you do to or on your CVO today?
Post by: HUBBARD on July 11, 2016, 04:07:42 PM
1st Oil Change on Maybelle's new Motor, at 1400 miles.  Nothing on the plug, but Jody's cuttin' the filter open today, just to see if it contains any foreign objects.  Prolly not, but need to know.  Went back with 4 qts. of 50W, and 1 1/4 qt. of 60W.  Petroleum based, of course.  I've always been anal about changing oil.  Never have gone over 1500 miles on a Motorsickle.  Even change my vehicles at 3000.  Blowed plenty of 'em up, but they all had clean oil!   :huepfenlol2: :huepfenlol2:  Later--HUBBARD 
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on July 11, 2016, 04:59:33 PM
1st Oil Change on Maybelle's new Motor, at 1400 miles.  Nothing on the plug, but Jody's cuttin' the filter open today, just to see if it contains any foreign objects.  Prolly not, but need to know.  Went back with 4 qts. of 50W, and 1 1/4 qt. of 60W.  Petroleum based, of course.  I've always been anal about changing oil.  Never have gone over 1500 miles on a Motorsickle.  Even change my vehicles at 3000.  Blowed plenty of 'em up, but they all had clean oil!   :huepfenlol2: :huepfenlol2:  Later--HUBBARD


5.25 quarts?  Where's the overflow collector?   ::)
Title: Re: What did you do to or on your CVO today?
Post by: 110tHunDer on July 11, 2016, 05:08:31 PM
Maybelle got a small block Chevy in her?! :o
Title: Re: What did you do to or on your CVO today?
Post by: HUBBARD on July 11, 2016, 05:17:54 PM

5.25 quarts?  Where's the overflow collector?   ::)

Put a SE Oil Pan on the Ol' Girl.  Jody said 6 qts. to fill it the first time... pan, filter, and cooler.  I'll run her a little and probably add a little.  I never did run one right on the full mark.  I like it about 2 dots under full.  Another quirk of mine.    Later--HUBBARD
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on July 11, 2016, 05:29:27 PM
Put a SE Oil Pan on the Ol' Girl.  Jody said 6 qts. to fill it the first time... pan, filter, and cooler.  I'll run her a little and probably add a little.  I never did run one right on the full mark.  I like it about 2 dots under full.  Another quirk of mine.    Later--HUBBARD


Wasn't thinking about the oversized pan.  Enough miles on it now that you're comfortable really opening it up?
Title: Re: What did you do to or on your CVO today?
Post by: HUBBARD on July 11, 2016, 05:29:41 PM
Maybelle got a small block Chevy in her?! :o

Hehehe.  I rode one of those.  Was it a Big Dog, ah hell, I don't remember.  Anyway, I'd be dead now, if I'da bought that thing.  Dangerous.  Real dangerous in a curve.  Later--HUBBARD
Title: Re: What did you do to or on your CVO today?
Post by: HUBBARD on July 11, 2016, 05:37:48 PM

Wasn't thinking about the oversized pan.  Enough miles on it now that you're comfortable really opening it up?

Haven't put her to the test yet, 2Lane.  Ain't had the weather or the time, so far.  Took it out on 77 yesterday, to Wytheville and back, to get her hot before Jody changed the oil.  Too much traffic, and too may Troopers.  Where in the hell is everybody going?  I mean, North and Southbound.  Thick.  I'll stretch her out here in a day or 2.  Jody's lap-top said 6100 for 4 seconds, was the highest RPM she'd been to, so far.  Later--HUBBARD
Title: Re: What did you do to or on your CVO today?
Post by: OBB on July 11, 2016, 07:57:26 PM
Put a SE Oil Pan on the Ol' Girl.  Jody said 6 qts. to fill it the first time... pan, filter, and cooler.  I'll run her a little and probably add a little.  I never did run one right on the full mark.  I like it about 2 dots under full.  Another quirk of mine.    Later--HUBBARD
Always thought you were about a quart low..... :P
Title: Re: What did you do to or on your CVO today?
Post by: HUBBARD on July 11, 2016, 08:18:44 PM
Always thought you were about a quart low..... :P

Yep, I've de-rated a few times, for sure!  :huepfenlol2:  I've mellowed a lot, though.  Hell.......I had to!  Later--HUBBARD
Title: Re: What did you do to or on your CVO today?
Post by: bigmegina on July 24, 2016, 12:24:34 AM
put 135 miles on mine today with my buddies in upstate ny.
Title: Re: What did you do to or on your CVO today?
Post by: Hnhcvo on July 24, 2016, 02:55:22 PM
(http://uploads.tapatalk-cdn.com/20160724/a26791041724b7bd9175f647a1e13210.jpg)put on a about 1000+ km the last week and took home best of show and $350 at the Kingston bike show and shine


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: HUBBARD on July 24, 2016, 03:56:36 PM
Hnhcvo, I really like that look, but how does it handle, compared to Stock?  I've heard this and that, but from no one that logged a 1000 miles on a run.  It appears it would be somewhat awkward in aggressive riding.  I'm talking about 2 Lane twisties.  But what do I know?  Please advise.  Later--HUBBARD
Title: Re: What did you do to or on your CVO today?
Post by: Hnhcvo on July 24, 2016, 04:18:37 PM
Hnhcvo, I really like that look, but how does it handle, compared to Stock?  I've heard this and that, but from no one that logged a 1000 miles on a run.  It appears it would be somewhat awkward in aggressive riding.  I'm talking about 2 Lane twisties.  But what do I know?  Please advise.  Later--HUBBARD
Haha. Your some what correct. A little more work in the corners and have to commit when your coming in hot. Definitely have to be aware of the limits. I just don't ride quite as aggressive. I'm sure you can I just know my personal ability and respect the 1000 pounds under me lol. Honestly though it's smooth and I love it. No problem setting the cruise and sitting back and steering with my ass on the straightaways.  I will say in the city it's a lot more work and definitely not as nimble


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Royalroadie on July 29, 2016, 10:28:59 PM
I cut back the lower vents on my lowers.  Boy I sure wish I did this 2years ago.  I got rid of a lot of heat on my legs.  Much more enjoyable on hot days.  I will post a picture tomorrow. I don't know why HDmade the vents the way they did.  I get twice as much air thru them now.
Title: Re: What did you do to or on your CVO today?
Post by: dm930 on July 30, 2016, 03:59:39 PM
I cut back the lower vents on my lowers.  Boy I sure wish I did this 2years ago.  I got rid of a lot of heat on my legs.  Much more enjoyable on hot days.  I will post a picture tomorrow. I don't know why HDmade the vents the way they did.  I get twice as much air thru them now.

Can you explain what you meant by "Cut Back the Lower Vents"?  I have a '15 CVO SG and I thought the lower vents open and close.  Am I missing something or is yours a different model?  Pics?
Title: Re: What did you do to or on your CVO today?
Post by: FXD_TG on July 30, 2016, 05:18:49 PM
Can you explain what you meant by "Cut Back the Lower Vents"?  I have a '15 CVO SG and I thought the lower vents open and close.  Am I missing something or is yours a different model?  Pics?

I think I know what he did and considered it myself; however, it gets cold here in the winter.  So, I just remove the doors during the summer: one bolt holds them in place.  It takes a little "english" to get the alignment channel off the alignment pin but NBD.  I've toyed around with installing screen material over the openings when the doors are removed. My guess is I'd bugger-up the paint on the lowers in the process which is why I've never acted on it.

(https://ridingtwoup.files.wordpress.com/2013/09/img_20130908_121925_0992-e1378683256558.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: skratch on July 30, 2016, 05:49:35 PM
I remove them as well.  I don't like to do something that is permanent.  however, in this case, if he does change his mind, the vent doors are only about $17 each.  ('old' style, pre 14)
Title: Re: What did you do to or on your CVO today?
Post by: Royalroadie on July 30, 2016, 07:21:48 PM
Fxd_TD that is what it looks like after the cut back.  But if I get into heavy rain I can still close them off by 80%.  Which will keep me fairly dry.  If it cost $39 to replace, NBD. Getting soaked to the bone on a trip is a PITA.  Getting rid of the heat was well worth the time and effort.  Just got back from a 225 mile ride in 90* weather and I can tell you it made a very noticeable difference.
Title: Re: What did you do to or on your CVO today?
Post by: FXD_TG on July 30, 2016, 11:57:36 PM
  Just got back from a 225 mile ride in 90* weather and I can tell you it made a very noticeable difference.

We just did a trip to Key West from Atlanta over the 4th of July week and yeah... anything to beat back the heat is a good thing.  In addition to removing the vent doors, it finally dawned on me that the finned head bolt bridges were probably hindering the ability of the cylinder heads to shed heat by restricting airflow around the spark plugs / top of the cylinders.  Still seeing oil temps in the 260°F range on hot days after just riding along, but that's down from what I was seeing with the bridges installed.

(https://ridingtwoup.files.wordpress.com/2016/07/screen-shot-2016-07-27-at-7-50-56-pm.png?w=500)


So, these also came off and will likely stay off the bike.

(http://s7d1.scene7.com/is/image/HarleyDavidson/61400148_TT?w=250)

(https://ridingtwoup.files.wordpress.com/2013/08/fins.jpg?w=500) (https://ridingtwoup.files.wordpress.com/2013/08/nofins.jpg?w=500)
Title: Re: What did you do to or on your CVO today?
Post by: charles05663 on July 31, 2016, 09:18:26 AM
We just did a trip to Key West from Atlanta over the 4th of July week and yeah... anything to beat back the heat is a good thing.  In addition to removing the vent doors, it finally dawned on me that the finned head bolt bridges were probably hindering the ability of the cylinder heads to shed heat by restricting airflow around the spark plugs / top of the cylinders.  Still seeing oil temps in the 260°F range on hot days after just riding along, but that's down from what I was seeing with the bridges installed.

(https://ridingtwoup.files.wordpress.com/2016/07/screen-shot-2016-07-27-at-7-50-56-pm.png?w=500)


So, these also came off and will likely stay off the bike.

(http://s7d1.scene7.com/is/image/HarleyDavidson/61400148_TT?w=250)

(https://ridingtwoup.files.wordpress.com/2013/08/fins.jpg?w=500) (https://ridingtwoup.files.wordpress.com/2013/08/nofins.jpg?w=500)

Thanks for the post on this.  I was wondering if they help/hindered the cooling of the engine.  Now I know.  Sounds like some Ward's fans are in my future.

Did you get a thermal pic with them on?

 :oops: :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: FXD_TG on July 31, 2016, 09:26:21 AM
Did you get a thermal pic with them on?

No... just found one of a standard Harley cylinder head which provided me with a big 'aha'. 

I'd initially tried to convince myself the add-on "fins" might work as a heat sink, but called B.S. on myself for that.
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on July 31, 2016, 10:33:22 AM
I went to the shop and uncovered Betsy (04 SEEG) then took her out for a brief but vigous workout, just to make sure she remains in top form. I didn't want her to get jealous over all the attention and riding that Orange Crush has been getting this year.
Title: Re: What did you do to or on your CVO today?
Post by: FXD_TG on July 31, 2016, 03:36:11 PM
the vent doors are only about $17 each.

Got a part number?
Title: Re: What did you do to or on your CVO today?
Post by: Grizzly on August 05, 2016, 01:26:23 PM
It just never stops, right?  Customizing that is...

Today (more than 8 years after purchasing my dream bike) I finally have the tank badges that I've wanted at least since 2011 when they first came out on the SESG's.

The Duracell came with very nice badges as pictured here
Title: Re: What did you do to or on your CVO today?
Post by: Grizzly on August 05, 2016, 01:28:41 PM
However, within the year I changed the badges out (mainly because I thought the red clashed with the copper) for emblems for a V-Rod and added the black paint inside the letters.

I also painted my lowers Black Onyx - the way I always felt they should have come from the factory... just like all other bikes with lowers, matching the lower portion of the main fairing and sides of the front fender.
Title: Re: What did you do to or on your CVO today?
Post by: Grizzly on August 05, 2016, 01:30:39 PM
... and finally today I have them just the way I always wanted.

I'm not too sure who was more surprised (me or the parts manager) that these tank emblems were not restricted!
Title: Re: What did you do to or on your CVO today?
Post by: leeekeee on August 05, 2016, 02:09:50 PM
looks like your done, mite as well sell and start again
Title: Re: What did you do to or on your CVO today?
Post by: OBB on August 05, 2016, 05:18:13 PM
However, within the year I changed the badges out (mainly because I thought the red clashed with the copper) for emblems for a V-Rod and added the black paint inside the letters.

I also painted my lowers Black Onyx - the way I always felt they should have come from the factory... just like all other bikes with lowers, matching the lower portion of the main fairing and sides of the front fender.
I can't agree more with the lowers. Makes a huge difference. Nice job.
Title: Re: What did you do to or on your CVO today?
Post by: skratch on August 05, 2016, 05:33:58 PM
Got a part number?

using the parts finder from st Charles, I got the following:

58889-05     vent, lower (right)
58890-05     vent, lower (left)

showing them to be $14.17 each.  don't know if st Charles is a discount dealer or if that is msrp and what you'll find them for at your local.
Title: What did you do to or on your CVO today?
Post by: MrSurly on August 05, 2016, 06:19:03 PM
I want to put those same badges on my CUSE5.
Aren't those on the FLTRSE 09?


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: OBB on August 05, 2016, 07:26:54 PM
I want to put those same badges on my CUSE5.
Aren't those on the FLTRSE 09?


Sent from my iPhone using Tapatalk
Nope. 11,12,some of the 15 SESG had them. Hell, maybe even the black 16 SESG.
Title: Re: What did you do to or on your CVO today?
Post by: FXD_TG on August 06, 2016, 07:36:14 AM
using the parts finder from st Charles, I got the following:

58889-05     vent, lower (right)
58890-05     vent, lower (left)

showing them to be $14.17 each.  don't know if st Charles is a discount dealer or if that is msrp and what you'll find them for at your local.

Excellent; much appreciated.  Surdyke has them for $11.xx + $7 shipping, so I might just pick up a pair and do a little experimenting.  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: FXD_TG on August 06, 2016, 08:55:38 AM
Fxd_TD that is what it looks like after the cut back.

Still wouldn't mind seeing a photo of the cut-out just to see how you cut-back the third arm of the molded-in support bracket.  I'm assuming you removed it back to the hub?
Title: Re: What did you do to or on your CVO today?
Post by: OBB on August 06, 2016, 08:59:18 AM
Still wouldn't mind seeing a photo of the cut-out just to see how you cut-back the third arm of the molded-in support bracket.  I'm assuming you removed it back to the hub?
Here's when I did the ones on my '11 I had.

before
(http://i275.photobucket.com/albums/jj306/ohiobellboy/2011%20Road%20Glide%20Ultra/Lowers%20vents%20trimmed/DSC05492.jpg) (http://s275.photobucket.com/user/ohiobellboy/media/2011%20Road%20Glide%20Ultra/Lowers%20vents%20trimmed/DSC05492.jpg.html)

after
(http://i275.photobucket.com/albums/jj306/ohiobellboy/2011%20Road%20Glide%20Ultra/Lowers%20vents%20trimmed/DSC05493.jpg) (http://s275.photobucket.com/user/ohiobellboy/media/2011%20Road%20Glide%20Ultra/Lowers%20vents%20trimmed/DSC05493.jpg.html)

(http://i275.photobucket.com/albums/jj306/ohiobellboy/2011%20Road%20Glide%20Ultra/Lowers%20vents%20trimmed/DSC05494.jpg) (http://s275.photobucket.com/user/ohiobellboy/media/2011%20Road%20Glide%20Ultra/Lowers%20vents%20trimmed/DSC05494.jpg.html)
Title: Re: What did you do to or on your CVO today?
Post by: JoeVibe on August 06, 2016, 12:24:20 PM
Changed my Ultra Freedom Shield from the Light tint to Medium tint and my Road King from a 20" to a 22" that John @ Freedom for me.
Title: Re: What did you do to or on your CVO today?
Post by: FXD_TG on August 06, 2016, 02:16:11 PM
So, after being inspired by OBB's hack I ordering some new vent doors from Surdyke  and then pulled out my Dremel tool and proceeded to hack-up my existing vent doors.

As mentioned in an early post, I wanted to see if I couldn't come up with a way to add some type of screen to the lower fairing openings to make them less obvious: I opted to use some expanded steel mesh.  The whole project and all of the photos are on my blog: https://ridingtwoup.wordpress.com/2016/08/06/adding-vents-to-the-harleys-vent-doors/

Here are some of the photos:

(https://ridingtwoup.files.wordpress.com/2016/08/20160806_102930.jpg?w=400) (https://ridingtwoup.files.wordpress.com/2016/08/20160806_122903.jpg?w=400) (https://ridingtwoup.files.wordpress.com/2016/08/20160806_124322.jpg?w=400)

(https://ridingtwoup.files.wordpress.com/2016/08/20160806_1300121.jpg?w=400)  (https://ridingtwoup.files.wordpress.com/2016/08/20160806_1259591.jpg?w=400)    (https://ridingtwoup.files.wordpress.com/2016/08/20160806_1426281.jpg?w=400)







Title: Re: What did you do to or on your CVO today?
Post by: phato1 on August 06, 2016, 05:18:36 PM
So, after being inspired by OBB's hack I ordering some new vent doors from Surdyke  and then pulled out my Dremel tool and proceeded to hack-up my existing vent doors.

As mentioned in an early post, I wanted to see if I couldn't come up with a way to add some type of screen to the lower fairing openings to make them less obvious: I opted to use some expanded steel mesh.  The whole project and all of the photos are on my blog: https://ridingtwoup.wordpress.com/2016/08/06/adding-vents-to-the-harleys-vent-doors/

Here are some of the photos:

(https://ridingtwoup.files.wordpress.com/2016/08/20160806_102930.jpg?w=400) (https://ridingtwoup.files.wordpress.com/2016/08/20160806_122903.jpg?w=400) (https://ridingtwoup.files.wordpress.com/2016/08/20160806_124322.jpg?w=400)

(https://ridingtwoup.files.wordpress.com/2016/08/20160806_130012.jpg?w=400)  (https://ridingtwoup.files.wordpress.com/2016/08/20160806_125959.jpg?w=400)   (https://ridingtwoup.files.wordpress.com/2016/08/20160806_142628.jpg?w=400)

I like that Idea a LOT and I happen to have some spare lower vents laying around. I also have a Dremel tool, rivets, and a rivet gun in the tool box.. I might just have to buy me some steel mesh or screen material....
Title: Re: What did you do to or on your CVO today?
Post by: OBB on August 06, 2016, 08:18:49 PM
So, after being inspired by OBB's hack I ordering some new vent doors from Surdyke  and then pulled out my Dremel tool and proceeded to hack-up my existing vent doors.

As mentioned in an early post, I wanted to see if I couldn't come up with a way to add some type of screen to the lower fairing openings to make them less obvious: I opted to use some expanded steel mesh.  The whole project and all of the photos are on my blog: https://ridingtwoup.wordpress.com/2016/08/06/adding-vents-to-the-harleys-vent-doors/

Here are some of the photos:

(https://ridingtwoup.files.wordpress.com/2016/08/20160806_102930.jpg?w=400) (https://ridingtwoup.files.wordpress.com/2016/08/20160806_122903.jpg?w=400) (https://ridingtwoup.files.wordpress.com/2016/08/20160806_124322.jpg?w=400)

(https://ridingtwoup.files.wordpress.com/2016/08/20160806_130012.jpg?w=400)  (https://ridingtwoup.files.wordpress.com/2016/08/20160806_125959.jpg?w=400)   (https://ridingtwoup.files.wordpress.com/2016/08/20160806_142628.jpg?w=400)








Pretty neat idea. That'll keep the big stuff from flying of the road into you. The vents are different from the ones that were on my '11. Mine didn't have that outer loop on them. What year are those for?
Title: Re: What did you do to or on your CVO today?
Post by: FXD_TG on August 06, 2016, 08:29:39 PM
Mine didn't have that outer loop on them. What year are those for?

No, they were identical.  I just carved them up a bit differently...

(https://ridingtwoup.files.wordpress.com/2016/08/20160806_101125.jpg?w=800)
Title: Re: What did you do to or on your CVO today?
Post by: OBB on August 06, 2016, 08:34:39 PM
No, they were identical.  I just carved them up a bit differently...

(https://ridingtwoup.files.wordpress.com/2016/08/20160806_101125.jpg?w=800)
Now that is very creative. Great work!
Title: Re: What did you do to or on your CVO today?
Post by: ImBroke on August 07, 2016, 06:37:43 PM
Installed a set of Super Shox after speaking with a couple guys yesterday that have them.  I thought the factory "premium" adjustable coil overs shocks were decent.  I had no idea how much better the ride could be.  Put about 60 miles on the new shocks and after a couple minor adjustments, found the sweet spot for me.  Not only is the ride smoother, it handles so much better.  With my 21/17 set up, corners at high speed were a little sketchy sometimes.
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on August 07, 2016, 06:45:13 PM
Dropped it off at the dealer for an oil leak issue and a new compensator. ESP should cover it all.
Title: Re: What did you do to or on your CVO today?
Post by: Road Dad on August 07, 2016, 10:07:55 PM
Rode to Sturgis
Title: Re: What did you do to or on your CVO today?
Post by: michaelokielee@yahoo.com on August 09, 2016, 09:51:59 AM
So, after being inspired by OBB's hack I ordering some new vent doors from Surdyke  and then pulled out my Dremel tool and proceeded to hack-up my existing vent doors.

As mentioned in an early post, I wanted to see if I couldn't come up with a way to add some type of screen to the lower fairing openings to make them less obvious: I opted to use some expanded steel mesh.  The whole project and all of the photos are on my blog: https://ridingtwoup.wordpress.com/2016/08/06/adding-vents-to-the-harleys-vent-doors/



Great job, I like that, I took the vents out of mine because they were too restrictive, but now I now how to fix them!!!
Title: Re: What did you do to or on your CVO today?
Post by: DesertHOG on August 09, 2016, 07:47:51 PM
I left it in the garage and took my Custom Galaxy Glide to the Rough Rider Rally in Las Vegas, NM where it attracted some attention.



Title: Re: What did you do to or on your CVO today?
Post by: 110tHunDer on August 09, 2016, 09:48:30 PM
Getting the SEUC ready to go for MV.  New front tire and brake and clutch fluid flush next week.  Polished the wheels.  Just want to say the bastard that designed the chisel wheels that came on the '12 SEUCs deserves death by scraped knuckles.  :sauer021: :sauer055: :sauer019: :zstupid: :rifle:
Title: Re: What did you do to or on your CVO today?
Post by: OBB on August 09, 2016, 09:54:48 PM
Getting the SEUC ready to go for MV.  New front tire and brake and clutch fluid flush next week.  Polished the wheels.  Just want to say the bastard that designed the chisel wheels that came on the '12 SEUCs deserves death by scraped knuckles.  :sauer021: :sauer055: :sauer019: :zstupid: :rifle:
The agitators or the ones on my '15 aren't much better. It's the damn rotors getting in the way of getting in close to the hub. I pull the rear one during winter hibernation just to make sure it gets a good cleaning and waxing at least once a year.
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on August 09, 2016, 10:06:22 PM
Took it apart; a little bit.
Title: Re: What did you do to or on your CVO today?
Post by: 110tHunDer on August 09, 2016, 10:07:30 PM
Couldn't stop?
Title: Re: What did you do to or on your CVO today?
Post by: HUBBARD on August 09, 2016, 10:08:19 PM
I left it in the garage and took my Custom Galaxy Glide to the Rough Rider Rally in Las Vegas, NM where it attracted some attention.

That's a good lookin' Machine, DesertHOG!  I'm gonna' build me one of 'dem bad bitches!  Later--HUBBARD
Title: Re: What did you do to or on your CVO today?
Post by: DesertHOG on August 09, 2016, 10:13:13 PM
That's a good lookin' Machine, DesertHOG!  I'm gonna' build me one of 'dem bad bitches!  Later--HUBBARD

 :2vrolijk_21: Nothing gets you there quite like a SuperCharger and I am sure you'll build the proper bottom end for it too. Best Wishes.  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: HUBBARD on August 09, 2016, 10:15:53 PM
Getting the SEUC ready to go for MV.  New front tire and brake and clutch fluid flush next week.  Polished the wheels.  Just want to say the bastard that designed the chisel wheels that came on the '12 SEUCs deserves death by scraped knuckles.  :sauer021: :sauer055: :sauer019: :zstupid: :rifle:

Me too!  Going to Tilley's to get my new Elites, as soon as I can get away.  That is the truth about these dam wheels!  I like the way they look, but dam!  I use a baby-bottle washer with a rag around it, but still tear my hands up!  Ain't there a solid wheel that'll fit the rear?   Later--HUBBARD
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on August 09, 2016, 11:16:51 PM
Couldn't stop?

Went farther before it was done.  Almost running again now though.  Now its a newer bike than it was before.
Title: Re: What did you do to or on your CVO today?
Post by: jpb on August 10, 2016, 02:31:04 PM
I left it in the garage and took my Custom Galaxy Glide to the Rough Rider Rally in Las Vegas, NM where it attracted some attention.

Hello Simon,  That a bas a$$ looking machine!  Rider poser looks awesome too!  Have fun in Sturgis.  Hope you avoid the snoring from last year!

John
Title: Re: What did you do to or on your CVO today?
Post by: DesertHOG on August 10, 2016, 07:15:28 PM
Hello Simon,  That a bas a$$ looking machine!  Rider poser looks awesome too!  Have fun in Sturgis.  Hope you avoid the snoring from last year!

John

Thanks buddy, wasn't able to attend Sturgis due to family health issues. Hoping to make MGV. Will you be there?
Title: Re: What did you do to or on your CVO today?
Post by: jpb on August 11, 2016, 08:12:58 AM
Thanks buddy, wasn't able to attend Sturgis due to family health issues. Hoping to make MGV. Will you be there?

No MGV.  My events are limited this year.  Probably just Ocean City, MD., East Coast Sturgis and Colonial Beach VA. to finish out my rally season.  I'm slowing down this year.  I just put in a S&S 124LC and doing a little local break-in riding.  That is like putting a Briggs & Stratton lawn mower engine into a tractor trailer when compared to what your riding!  lol.  ;D
Title: Re: What did you do to or on your CVO today?
Post by: HUBBARD on August 11, 2016, 02:53:29 PM
Wonder if Ol' BigLew and DesertHog will turn 'nem 2 Big-Air Motors loose in the Valley?  That would be a sight to see!  I'm not stirring chit like Harry, and Pete, and TN does......just sayin........!  I'd sure like to see that!  Later--HUBBARD
Title: Re: What did you do to or on your CVO today?
Post by: DesertHOG on August 11, 2016, 08:35:05 PM
Wonder if Ol' BigLew and DesertHog will turn 'nem 2 Big-Air Motors loose in the Valley?  That would be a sight to see!  I'm not stirring chit like Harry, and Pete, and TN does......just sayin........!  I'd sure like to see that!  Later--HUBBARD

If I show, it's what I plan to be riding. Not much on racing. I'll open it up but frankly it just gets up to top speed faster. Top speed is still the same unless you change the bottom end, beef it up and change the gear ratios. And I sure don't know how to do that, just read about it and bet it cost just as much as putter the blower on it.

DH
Title: Re: What did you do to or on your CVO today?
Post by: HUBBARD on August 12, 2016, 09:53:52 AM
If I show, it's what I plan to be riding. Not much on racing. I'll open it up but frankly it just gets up to top speed faster. Top speed is still the same unless you change the bottom end, beef it up and change the gear ratios. And I sure don't know how to do that, just read about it and bet it cost just as much as putter the blower on it.

DH

You're right about that, DH!  The infamous Buddy Parrot had Tilley put one on his Bike, and he blew the bottom end out of it more than once, before Tilley beefed it up.  And that didn't make it bullet-proof, it just lasted a little longer.  Buddy Parrot twisted it every time he mounted it!  It had like 200HP, I think.  That Harley was dangerous!  Later--HUBBARD
Title: Re: What did you do to or on your CVO today?
Post by: BigLew on August 12, 2016, 11:06:07 AM
Hub stop stirring up crap or I'm going to post some old pictures! He he

BigLew
Title: Re: What did you do to or on your CVO today?
Post by: Para Bellum on August 12, 2016, 07:28:25 PM
Hub stop stirring up crap or I'm going to post some old pictures! He he

BigLew
Post 'em anyways!  Inquiring minds want to know.   :innocent:
Title: Re: What did you do to or on your CVO today?
Post by: tysndys on August 12, 2016, 10:01:45 PM
2015/16 look on my 2012 SESG
Title: Re: What did you do to or on your CVO today?
Post by: HUBBARD on August 14, 2016, 04:47:13 PM
Went to Tilley's and had my New AE's installed.  Later--HUBBARD
Title: Re: What did you do to or on your CVO today?
Post by: HUBBARD on August 14, 2016, 04:49:03 PM
Put New Front & Rear.  Originals lasted about 6000 miles.  Later--HUBBARD
Title: Re: What did you do to or on your CVO today?
Post by: skratch on August 14, 2016, 04:55:08 PM
Put New Front & Rear.  Originals lasted about 6000 miles.  Later--HUBBARD

I can't imagine only getting 6k out of a set of tires.  I got over 20k on my stock dunlops and still had plenty of tread.  only changed due to cupping.
Title: Re: What did you do to or on your CVO today?
Post by: HUBBARD on August 14, 2016, 05:05:40 PM
Had a Great Ride down, but got a wet-a$$ from Fancy Gap, all the way home.  Had to stop a few times, as it was really pouring.  BigLew met me at Tilley's, and we chewed the fat for a couple hours.  He rode a ways back with me, but we never got to twist 'em, much.  Well hell, none at all, actually.  Not that I could do anything with his Motorsickle, anyway, and there was just too much traffic.  Then we ran up on Deputy-Dawg, a ways before where Mike turned off to head to Greensboro.  Hard to twist 'em like we used to.  Never seen so much dam traffic as there is!  Everywhere!  Gonna' take me a little longer to clean Ol' Maybelle this time.  That dam rain looks like somebody poured milk all over the Ol' Girl!  A mess, to say the least.  Sure am glad I got those cupped out pieces of chit off my Motorsickle.  Maggie Valley will be a lot more fun with new rubber!  Later--HUBBARD 
Title: Re: What did you do to or on your CVO today?
Post by: MIKEYTEE on August 14, 2016, 05:08:27 PM
skratch, you don't know Hubbard. Ol Hub don't hold back when he rides. No burnouts but he has been known to stretch the speed limit a little now and then. :o
Mike
 :drink:
Title: Re: What did you do to or on your CVO today?
Post by: HUBBARD on August 14, 2016, 05:22:20 PM
I can't imagine only getting 6k out of a set of tires.  I got over 20k on my stock dunlops and still had plenty of tread.  only changed due to cupping.

I had tread left, but it was cupped so bad, it looked like a wash-board.  I'm hopin' a new tire will eliminate that high-speed wobble I had.  Big Torque is hard on rear tires.  Ol' Maudie would only get 4-4500 miles outta' the rear tire.  'Course that was a 16" Tire, too.  Everything wears quicker with Big Motors.  'Specially if you like to twist 'em!  Later--HUBBARD 
Title: Re: What did you do to or on your CVO today?
Post by: Joel on August 16, 2016, 10:26:49 PM
Picked up pizza and beer
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on August 17, 2016, 12:56:02 PM
Picked up pizza and beer

I usually don't have room left for the pizza..  :drink:


I got mine back from the dealer, new Compensator and oil leak repaired, a lot quieter now when I start it up and no more mess on the tranny top cover  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Glenncarp on August 24, 2016, 08:15:44 AM
Picked up pizza and beer

That my friend is not a "pizza", that is what we call in FL a "welfare pie" Lmao. I believe the defining factor is the plastic cover on it.
Title: Re: What did you do to or on your CVO today?
Post by: DesertHOG on August 25, 2016, 12:18:43 AM
That my friend is not a "pizza", that is what we call in FL a "welfare pie" Lmao. I believe the defining factor is the plastic cover on it.

Looks like it has cucumber or zucchini slices in it .. woah!
Title: Re: What did you do to or on your CVO today?
Post by: OBB on August 25, 2016, 09:53:19 AM
Pulled the sheets off of it, lowered the jack a little, upgrade the firmware in the radio, checked the new functions, covered it back up. Hopefull the Dr next week will clear me to ride.
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on August 25, 2016, 09:02:59 PM

I'm pulling for ya Mike!! Hope to see ya in the saddle in MV
Title: Re: What did you do to or on your CVO today?
Post by: Bav on August 26, 2016, 04:31:32 AM
Arrived at Thunder in the Glens Aviemore Scotland

(http://uploads.tapatalk-cdn.com/20160826/ba784c7f6b20287e8c2958d6898cca8b.jpg)


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on August 27, 2016, 07:15:17 AM
I hope I ain't jinxing it but for one of the few times since the WV GTG, me and Miss Susan are gonna ride today. TEE HEE HEE. I'm so excited. It's been raining every weekend since except last Saturday and it was 60 percent then so I fished a tournament instead.

We are going up to Fayetteville to the New River Gorge HD Open House to check out the 2017 bikes. I will report back later on my observations.

Title: Re: What did you do to or on your CVO today?
Post by: Hnhcvo on August 28, 2016, 03:20:04 PM
(http://uploads.tapatalk-cdn.com/20160828/3d9f41a04e9c7a63ef2e537ceb077e7b.jpg)my friends at Klockwerks sent me a little gift. Put a couple hundred miles on it and it actually works pretty damn good. If your looking for a shield the flare is on point


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Grizzly on August 28, 2016, 04:05:19 PM
I must say that I'm a little surprised with this topic and the new bikes now on the floor, that we haven't seen the reply...

"Traded it in on a 2017".  :nixweiss:

Of course, the CVO's haven't reached the showroom floors yet... That makes perfect sense.

Who will be first?
Title: Re: What did you do to or on your CVO today?
Post by: OBB on August 28, 2016, 04:09:47 PM
(http://uploads.tapatalk-cdn.com/20160828/3d9f41a04e9c7a63ef2e537ceb077e7b.jpg)my friends at Klockwerks sent me a little gift. Put a couple hundred miles on it and it actually works pretty damn good. If your looking for a shield the flare is on point


Sent from my iPhone using Tapatalk
Glad you have friends at Kockwerks, they want to rape everyone else.  >:(
Title: Re: What did you do to or on your CVO today?
Post by: OBB on August 28, 2016, 04:11:48 PM
Changed out my home made driving lights for a set of these...

(http://uploads.tapatalk-cdn.com/20160828/a1518a56721c1d9c912957c18653a4a3.jpg)

Hoping I can test them out later this week.
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on August 28, 2016, 08:37:39 PM
I must say that I'm a little surprised with this topic and the new bikes now on the floor, that we haven't seen the reply...

"Traded it in on a 2017".  :nixweiss:

Of course, the CVO's haven't reached the showroom floors yet... That makes perfect sense.

Who will be first?

Not me, I'm in no mood to be a beta tester.

Besides, my 11.5 CUSE6 is better looking than the '17 offerings.
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on August 28, 2016, 08:45:35 PM
Me 2 neither on the trading deal. At least not for a couple years.
Title: Re: What did you do to or on your CVO today?
Post by: Nicky Pass on August 28, 2016, 08:50:32 PM
Not me, I'm in no mood to be a beta tester.

Beta tester....that's exactly why I wouldn't jump.
Title: Re: What did you do to or on your CVO today?
Post by: FXD_TG on August 28, 2016, 08:58:10 PM
Took a little 375 mile loop from Northwest Atlanta to the Nantahala River Gorge for lunch, then to Deals Gap to meet some other folks who joined us for a ride across the Cherohala to Tellico Plains with a short detour to check out the Bald River Falls. We were pleasantly surprised by a new menu and the quality of the food at Buckets & Brews Bistro in Tellico Plains; definitely worth checking out if you're in town and need something to eat.  Since it was dark when we headed back to Atlanta we opted to take 411 instead of 68 into Georgia: big mistake.  TDOT left a fine coat of crushed gravel along a mile-long section of road way and I'm guessing all of our bikes are now sporting a nice collection of dings and chipped windscreens and headlights: unbelievable.  We rolled into the driveway around 11:30pm.  A great day other than the TDOT roadwork.

(https://ridingtwoup.files.wordpress.com/2016/08/screen-shot-2016-08-28-at-11-12-43-am.png?h=400) (https://ridingtwoup.files.wordpress.com/2016/08/cherahola.jpg?h=400)
(https://ridingtwoup.files.wordpress.com/2016/08/falls2.jpg?h=400) (https://ridingtwoup.files.wordpress.com/2016/08/buckets_brews.jpg?h=400)
Title: Re: What did you do to or on your CVO today?
Post by: dayne66 on August 28, 2016, 09:15:49 PM
Put it up on the lift and dropped the fluids.......it's raining...so...I'll put the filter and fluids in tonight.
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on August 29, 2016, 01:09:40 AM
Pushed my handlebars forward. . . Little higher and more comfy. .  ;D
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on August 29, 2016, 11:39:59 PM
Rode the PIG TRAIL in Arkansas, will be here all week
Title: Re: What did you do to or on your CVO today?
Post by: Gerhard on September 01, 2016, 04:26:27 AM
Yesterday - having a break  ;)
Title: Re: What did you do to or on your CVO today?
Post by: OBB on September 01, 2016, 05:18:11 AM
Rode it yesterday for the first time in two months. Doc cleared me to ride after my neck surgery back in July  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on September 01, 2016, 07:24:12 AM
Rode it yesterday for the first time in two months. Doc cleared me to ride after my neck surgery back in July  :2vrolijk_21:

Good deal!  Having been through that this year (not neck surgery but out of the saddle for 6 weeks), ain't it great to get back on the horse?  You really don't know how much you enjoy this sport until you can't or are restricted from riding.  Praise the Lord for your healing and glad your back riding again.... :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: FLTRCVO on September 01, 2016, 09:35:49 AM
Went to grab lunch in Utah 130 mile ride, cruising at 85 mph, into the ride about 40 miles bike started running on one cylinder. Thinking a rod issue is upon me. Bike in the shop motor will be torn down within 24 hours. That's what I did to my CVO today.
Title: Re: What did you do to or on your CVO today?
Post by: Rooster on September 01, 2016, 03:19:39 PM
Wow FLT, sorry to hear hope it doesn't hurt to much.
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on September 01, 2016, 10:00:45 PM
Scratched it on hiway 7
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on September 01, 2016, 10:40:00 PM
Rode the PIG TRAIL in Arkansas, will be here all week
nic
Nice, where are you staying?

Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on September 01, 2016, 11:29:53 PM
In lill Rock tonight heading north up 9 in the am
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on September 02, 2016, 10:19:26 PM
Enjoy
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on September 05, 2016, 08:02:12 PM
Today I saved $400 or so doing my own 10,000 mile service after hitting that mark with a run to the cherohala skyway this past Saturday. It was a great day for riding. It had been 17 years since I rode it last and I live here...go figure. Sure do enjoy working on the bike. Gave Beauregard a good, 2 hour wash and wax, too.

Good news on the 10K service, there was little to no metal on the magnets on any of the three drain plugs.  I was fairly pleased with that... ;D
Title: Re: What did you do to or on your CVO today?
Post by: manllyy on September 05, 2016, 10:47:28 PM
Washed babe today and then take em for short trip (http://uploads.tapatalk-cdn.com/20160906/47eeb4f505800ac8788704acccfa6140.jpg)


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: FLTRCVO on September 06, 2016, 09:56:13 AM
Wow FLT, sorry to hear hope it doesn't hurt to much.
Estimate is in $5487.44 and the Dealer warned he hasn't actually gotten to the Primary side yet and I have the original compensator assembly with 83693 miles on it. The repair is covered with the ESP, so no hurt.
Title: Re: What did you do to or on your CVO today?
Post by: Rooster on September 06, 2016, 03:02:19 PM
Good you have the ESP :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: OBB on September 06, 2016, 05:01:03 PM
Wandered aimlessly through eastern Ohio with it splattering a few bugs. I did stop in and see member Deldago at work for a bit. It's nice to be able to do that after not being able to ride for 2 months.
Title: Re: What did you do to or on your CVO today?
Post by: zrdstr3 on September 09, 2016, 06:45:40 PM
Installed my new Lepera Maverick seat and a Paul Yaffe Stealth III license plate mount on my 16 CVO Street Glide. Really was happy with stock seat but I took the bike to Tennessee on vacation last month and I stayed in a nice cabin up in the mountains. Unfortunately a raccoon climbed up on the bike one night and tore a hole in the driver seat. Got the Lepera cause I wanted a drives backrest.
Title: Re: What did you do to or on your CVO today?
Post by: HUBBARD on September 09, 2016, 09:23:33 PM
Installed my new Lepera Maverick seat and a Paul Yaffe Stealth III license plate mount on my 16 CVO Street Glide. Really was happy with stock seat but I took the bike to Tennessee on vacation last month and I stayed in a nice cabin up in the mountains. Unfortunately a raccoon climbed up on the bike one night and tore a hole in the driver seat. Got the Lepera cause I wanted a drives backrest.

Sure that was a raccoon?  Later--HUBBARD
Title: Re: What did you do to or on your CVO today?
Post by: zrdstr3 on September 10, 2016, 09:48:49 AM
He left some nice tracks on the tank, looked like he was trying to ride it.
Title: Re: What did you do to or on your CVO today?
Post by: 68 XLCH on September 10, 2016, 10:04:31 AM
Actually yesterday.

Updated the Nav maps and adjusted my headlight.

Checked the air, coolant, trans, and engine oil.

Ready for a ride on Sunday, if the weather cooperates.

Wiped it down.

(http://i203.photobucket.com/albums/aa32/ES345/IMG_2004_zpsosmxxstg.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on September 10, 2016, 08:58:51 PM
Scratched it on hiway 7
washed it and after further inspection it looks a lill worse, I can't believe I rode out of this corner...bike slide across the lane on the cross under pipe and muffler then rited itself and kept on going down the rode... Think I was a lill lucky or something
Title: Re: What did you do to or on your CVO today?
Post by: 110tHunDer on September 10, 2016, 09:05:34 PM
Damn!  Never seen that before!  Good job keeping the shiny side up!  :2vrolijk_20: :znotworthy: :beerchug:
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on September 10, 2016, 09:10:59 PM
washed it and after further inspection it looks a lill worse, I can't believe I rode out of this corner...bike slide across the lane on the cross under pipe and muffler then rited itself and kept on going down the rode... Think I was a lill lucky or something
Damn!!! :shocked2: Glad it was a positive outcome... had that been me I'd still have the seat sucked up inside of me. :oops:

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: FLTRCVO on September 10, 2016, 09:21:46 PM
washed it and after further inspection it looks a lill worse, I can't believe I rode out of this corner...bike slide across the lane on the cross under pipe and muffler then rited itself and kept on going down the rode... Think I was a lill lucky or something
Nice recovery.
Title: Re: What did you do to or on your CVO today?
Post by: cambo on September 11, 2016, 02:54:54 PM
Washed 4700 miles worth of dirt off the bike.
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on September 11, 2016, 03:43:43 PM
Washed 4700 miles worth of dirt off the bike.
We all know how hard it is to make the 2nd pic after the 1st pic...
Title: Re: What did you do to or on your CVO today?
Post by: Sierramadre on September 11, 2016, 03:47:50 PM
Removed the reflectors from the front fork. Swapped the front turn signals with Custom Dymamic LED Ringz. Added a curved license plate bracket. Now it's time to ride...
Title: Re: What did you do to or on your CVO today?
Post by: cambo on September 11, 2016, 06:08:07 PM
We all know how hard it is to make the 2nd pic after the 1st pic...
Wasn't hard at all! Only took three wash/dry cycles to get every bit of dirt and then polish the "minimal" chrome on the bike. Only about 4.5 hours (1.5 hours for the wheels)!  :'(
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on September 11, 2016, 11:03:54 PM
Removed the reflectors from the front fork. Swapped the front turn signals with Custom Dymamic LED Ringz. Added a curved license plate bracket. Now it's time to ride...
Good for you! Go ride the CR-- out of it...
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on September 21, 2016, 08:41:44 AM
Got home at 0300 this am from town the bike home from Parsons TN.
 
I headed out for Bikes Blues and BBQ yesterday morning.  Beautiful day, great temperatures.  I taking all secondary roads, 280 miles into the trip, there was a loud metallic clank.  Then it sounded like the motor was full of ball bearings and making no power.  Pulled off immediately.  I'm pretty sure it dropped a valve.  I was on the 2015 SERGU, with only 42,694 miles on the bike and 12 days out of factory warranty.

Taking it to dealer this morning.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on September 21, 2016, 09:26:38 AM
Got home at 0300 this am from town the bike home from Parsons TN.
 
I headed out for Bikes Blues and BBQ yesterday morning.  Beautiful day, great temperatures.  I taking all secondary roads, 280 miles into the trip, there was a loud metallic clank.  Then it sounded like the motor was full of ball bearings and making no power.  Pulled off immediately.  I'm pretty sure it dropped a valve.  I was on the 2015 SERGU, with only 42,694 miles on the bike and 12 days out of factory warranty.

Taking it to dealer this morning.
That really sucks. Will be interesting to see what they tell you. Side note, we rode over there last week while attending MV. Nice place they have.
Title: Re: What did you do to or on your CVO today?
Post by: FLTRCVO on September 21, 2016, 11:15:04 AM
Watched my 2009 FLTRSE3 without a motor installed collect dust at Red Rock H.D. awaiting engine cases from the Motor Company with VIN stamps.
Title: Re: What did you do to or on your CVO today?
Post by: TNCarters on September 21, 2016, 11:32:50 AM
Hate that Dave.  I'm still 6 months from factory warranty ending and undecided whether to take the ESP or get a builder to change out some of the worst of the trouble parts.  You do put a few more miles on your bikes than many of us but a nearly new bike should not develop major engine trouble in under 50 k miles.  I'm only at 16k in the year and half I've had the RGU.  Let us know how it goes.
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on September 21, 2016, 12:19:44 PM
Got home at 0300 this am from town the bike home from Parsons TN.
 
I headed out for Bikes Blues and BBQ yesterday morning.  Beautiful day, great temperatures.  I taking all secondary roads, 280 miles into the trip, there was a loud metallic clank.  Then it sounded like the motor was full of ball bearings and making no power.  Pulled off immediately.  I'm pretty sure it dropped a valve.  I was on the 2015 SERGU, with only 42,694 miles on the bike and 12 days out of factory warranty.

Taking it to dealer this morning.

Bad news for sure, Dave.  Keep us posted. 
Title: Re: What did you do to or on your CVO today?
Post by: cambo on September 21, 2016, 06:21:46 PM
Not exactly today, but had to tale the fender off the BO and send it over to Joe Z to try and stop the 'rust under the clearcoat' situation! :( Joe received it today. So for now I am the proud owner of a CVO BO Bobber!
Title: Re: What did you do to or on your CVO today?
Post by: Nicky Pass on September 21, 2016, 06:54:57 PM
Joe can fix it!  If I was you, I'd probably have the fender under coated like he did on mine, and I'd also have him paint 1/8" around the hole black to match the black.  The problem with the fender is the insert for the seat screw moves and breaks the clear exposing the bare metal.  If it was painted just a little bit, you wouldn't have to problem come back.  Or.....fill the hole!
Title: Re: What did you do to or on your CVO today?
Post by: manllyy on September 21, 2016, 10:25:52 PM
Replaced 10Mm spark plug cord
And then got plan upgrade To 117 Bolt kit Screaming Eagle (http://uploads.tapatalk-cdn.com/20160922/401827159985ead482acaf98d248913f.jpg)


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on September 22, 2016, 06:55:01 AM
Hate that Dave.  I'm still 6 months from factory warranty ending and undecided whether to take the ESP or get a builder to change out some of the worst of the trouble parts.  You do put a few more miles on your bikes than many of us but a nearly new bike should not develop major engine trouble in under 50 k miles.  I'm only at 16k in the year and half I've had the RGU.  Let us know how it goes.

I personally know another 2015 SERGU that had motor replaced at around 33K miles.  I know another that had a lifter issue at 40K miles and now mine, all 15's.

I friend I road to CA with Summer of 15 had the lifer go in his 14 CVO limited at 21K miles.

Seems its the 110's with the issues, not the 96" and 103" motors. 

Bad news for sure, Dave.  Keep us posted. 

I will keep y'all posted.

At dealer now being torn down.  I have a great relationship with service manager, general manager and owner. 
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on September 22, 2016, 07:31:22 AM
I will keep y'all posted.

At dealer now being torn down.  I have a great relationship with service manager, general manager and owner.

Scott runs a very good ship at SMHD with some very good people working for him.  Good luck. 

Did he have any CVO's on the showroom?  We were there a week ago and only one '17 SESG and it was being purchased.  Nothing else.
Title: Re: What did you do to or on your CVO today?
Post by: GregKhougaz on September 22, 2016, 10:26:32 AM
Got home at 0300 this am from town the bike home from Parsons TN.
 
I headed out for Bikes Blues and BBQ yesterday morning.  Beautiful day, great temperatures.  I taking all secondary roads, 280 miles into the trip, there was a loud metallic clank.  Then it sounded like the motor was full of ball bearings and making no power.  Pulled off immediately.  I'm pretty sure it dropped a valve.  I was on the 2015 SERGU, with only 42,694 miles on the bike and 12 days out of factory warranty.

Taking it to dealer this morning.


Sorry to read, Dave.  Lost my rear lifter just before 15K miles.  Tech told me he went through the motor  and bike. All has been well for 8K. Fingers crossed.   Good luck with yours.

GK
Title: Re: What did you do to or on your CVO today?
Post by: cambo on September 22, 2016, 06:39:29 PM
Joe can fix it!  If I was you, I'd probably have the fender under coated like he did on mine, and I'd also have him paint 1/8" around the hole black to match the black.  The problem with the fender is the insert for the seat screw moves and breaks the clear exposing the bare metal.  If it was painted just a little bit, you wouldn't have to problem come back.  Or.....fill the hole!

Hmmm....not a bad idea! Although the rust was not connected to the whole at all. In fact the area under the skull was clean and clear.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on September 23, 2016, 07:53:35 AM
Well the motor is being replaced.  It was not a dropped valve, but rather a lifter which took out lots of other stuff.

Been riding the CVO King the last couple days back and forth to see about the CVO RG Ultra.  Will ride the king again today.  Thank God for two bikes.
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on September 23, 2016, 10:47:36 AM
Well the motor is being replaced.  It was not a dropped valve, but rather a lifter which took out lots of other stuff.

Been riding the CVO King the last couple days back and forth to see about the CVO RG Ultra.  Will ride the king again today.  Thank God for two bikes.

Do you have to go back with stock or are you modifying it a bit?  Did the factory warranty cover it even though you were just a day or so out?  I'm with you on the extra bike deal...sure it nice having that option. 
Title: Re: What did you do to or on your CVO today?
Post by: FLTRCVO on September 23, 2016, 11:01:12 AM
Well the motor is being replaced.  It was not a dropped valve, but rather a lifter which took out lots of other stuff.

Been riding the CVO King the last couple days back and forth to see about the CVO RG Ultra.  Will ride the king again today.  Thank God for two bikes.
Sounds exactly like my situation on 8/31/16, should be picking up the bike today. My bike however had 83,696 miles on it, all original (2009 FLTRSE3) the lifter imploded and I had to wait for engine cases for a complete rebuild under the ESP. The ESP bill is in excess of 6300. according to ESP.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on September 24, 2016, 07:08:50 AM
Do you have to go back with stock or are you modifying it a bit?  Did the factory warranty cover it even though you were just a day or so out?  I'm with you on the extra bike deal...sure it nice having that option.

It has to be stock, motor coming from Factory.  HD is covering it.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on September 24, 2016, 07:12:05 AM
Traded the 15 SERGU for this.

Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on September 24, 2016, 07:27:53 AM
Traded the 15 SERGU for this.

Well, alrighty then...good lookin scooter, Dave.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on September 24, 2016, 07:45:01 AM
Well, alrighty then...good lookin scooter, Dave.

Was really hoping HD would have had an X model CVO road glide, as I much prefer them.  No such luck so after several test rides I got this.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on September 24, 2016, 09:23:44 AM
Was really hoping HD would have had an X model CVO road glide, as I much prefer them.  No such luck so after several test rides I got this.
Could have found one of the limited paint sets and had the Stage III upgrade done. Wouldn't have been a CVO but still would have had some decent power and nice paint. Congrats on the new bike.
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on September 24, 2016, 10:48:02 AM
Traded the 15 SERGU for this.
grats... and who better than you to put this M8 to the test  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: DesertHOG on September 24, 2016, 12:40:09 PM
Traded the 15 SERGU for this.

Test ride must have been impressive. I rode the 107 and it was comparable to my 110. How much better was the 114? Will you miss the fixed fairing?
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on September 24, 2016, 01:22:46 PM
Traded the 15 SERGU for this.
grats... and who better than you to put this M8 to the test  :2vrolijk_21:
Wouldn't that be a 110 Twinkie?? :nixweiss: M8's are in the 2017's.

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on September 24, 2016, 01:33:38 PM
Hey d00d, Dave traded his 2015 for the 2017 (twinkie to an M8) and yep, freddy, Dave would be a good one to ring that baby out with miles in a short time... ;D
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on September 24, 2016, 01:37:03 PM
Hey d00d, Dave traded his 2015 for the 2017 (twinkie to an M8) and yep, freddy, Dave would be a good one to ring that baby out with miles in a short time... ;D
:oops: My bad... read it wrong... thought it was he got a 2015. :-[

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on September 24, 2016, 02:02:04 PM
:oops: My bad... read it wrong... thought it was he got a 2015. :-[

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
his 15 is already wore it out,  :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on September 24, 2016, 03:28:06 PM
:oops: My bad... read it wrong... thought it was he got a 2015. :-[

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
You are allowed a mistake once in a blue moon...don't let it happen again.... ;D :huepfenjump3: :bananarock: :huepfenlol2: :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on September 24, 2016, 03:42:35 PM
You are allowed a mistake once in a blue moon...don't let it happen again.... ;D :huepfenjump3: :bananarock: :huepfenlol2: :2vrolijk_21:
Thanks... appreciate you!!! :D :D

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: FXD_TG on September 24, 2016, 05:36:07 PM
Did a 250 round trip to Macon, GA, from 10:30am to 1:30am to meet up with a friend to be his wingman on the final leg of his BurnBurner GOLD 1,500 mi / 24 hour ride that began at 2:00am EST on Friday. 

Let's just say his 2016 Road Glide CVO has been racking up some miles over the past month... Don't believe he's on the forum, but an epic ride just the same: Atlanta to Memphis to New Orleans to Lake City and then back to Atlanta in under 24 hours.

(https://ridingtwoup.files.wordpress.com/2016/09/screen-shot-2016-09-24-at-9-59-46-am.png?w=960)
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on September 25, 2016, 07:59:45 AM
Test ride must have been impressive. I rode the 107 and it was comparable to my 110. How much better was the 114? Will you miss the fixed fairing?

The 114 is really nice.  100 percent stock it out performs the 110 in my old SERGU with pipes, and a good dyno tune by Doc.  Very smooth motor and very good torque.

Yes I miss the fixed fairing, especially over 80mph and at slow speed parking lot stuff.  I feel a bit clausterfobic on the batwing, every thin is right there on my lap.

New front suspension is also a very big improvement. 

I put just over 300 miles on her yesterday.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on September 27, 2016, 06:34:01 AM
Road the CVO King home from dealer where I left it when I picked up the 17, took a few twisty roads on the way home.

Washed the 17 and installed some hwy pegs.  Hope to ride it some more today.
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on September 28, 2016, 06:54:40 PM
Finally got the cupped up, noise making POS stock tire off the rear of Orange Crush. Replaced with American Elite. Didn't know how screwed up the stock tire was until riding home on the fresh one, SMOOTH!!!

Supposed to have another add on in my hand tomorrow...will post pictures when installed...
Title: Re: What did you do to or on your CVO today?
Post by: Billy on September 28, 2016, 10:26:24 PM
Just installed  American Elite  2nd gen. Great  ride. Like a new bike after the cup stock Dunlops. I hope they don't cup in 8K miles this time. Billy
Title: Re: What did you do to or on your CVO today?
Post by: FLTRCVO on September 28, 2016, 10:36:11 PM
Finally got the cupped up, noise making POS stock tire off the rear of Orange Crush. Replaced with American Elite. Didn't know how screwed up the stock tire was until riding home on the fresh one, SMOOTH!!!

Supposed to have another add on in my hand tomorrow...will post pictures when installed...
What caused the cupping?, there must be a reason the tire cupped.
Title: Re: What did you do to or on your CVO today?
Post by: FLTRCVO on September 28, 2016, 10:37:57 PM
Just installed  American Elite  2nd gen. Great  ride. Like a new bike after the cup stock Dunlops. I hope they don't cup in 8K miles this time. Billy
What caused the tire to cup? There must be a reason why the tire cupped.
Title: Re: What did you do to or on your CVO today?
Post by: Kingspoke on September 28, 2016, 11:19:30 PM
Just installed  American Elite  2nd gen. Great  ride. Like a new bike after the cup stock Dunlops. I hope they don't cup in 8K miles this time. Billy

Yeah, I strongly agree, much better than Harley's Duncraps!  These tires OEM Dunlops crack and cup.  The Dunlop AE's are a much better tire. :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on September 29, 2016, 06:27:25 AM
Day five of ownership, had the 1000 mile service done on the 17 SESG, have 1196 miles on it so far.  Today I will ride her to bike night.
Title: Re: What did you do to or on your CVO today?
Post by: FLTRCVO on September 29, 2016, 08:27:14 AM
Day five of ownership, had the 1000 mile service done on the 17 SESG, have 1196 miles on it so far.  Today I will ride her to bike night.
At this rate you will be able to be the first to give this Group the first impression of the 2018 CVO Road Glide Ultra, because this bike will have to many miles on it to keep.
Title: Re: What did you do to or on your CVO today?
Post by: DCFIREMANN on September 29, 2016, 09:03:45 AM
Pulled the radio, speakers, and amp from my 14. Going to replace the system with the new J&M Corp XXT ROKKER system.

Be Safe

THE DAWG
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on September 29, 2016, 01:02:14 PM
What caused the cupping?, there must be a reason the tire cupped.

Dang if I know. It started howling at around 5000 miles and I always checked the pressure keeping it at 40 PSI. By 6000 miles I had enough, but tires were on back order through Drag...Came off backorder and replaced at 9300 miles.
Title: Re: What did you do to or on your CVO today?
Post by: FLTRCVO on September 29, 2016, 03:50:20 PM

Dang if I know. It started howling at around 5000 miles and I always checked the pressure keeping it at 40 PSI. By 6000 miles I had enough, but tires were on back order through Drag...Came off backorder and replaced at 9300 miles.
Was it the front tire on the CVO Road King?
Title: Re: What did you do to or on your CVO today?
Post by: Billy on September 29, 2016, 04:54:03 PM
What caused the tire to cup? There must be a reason why the tire cupped.
Just a design flaw  is what Dunlop tells me. Can't be helped. riding in a straight line is bad as it moves the tread and I wears on the side. . MY 07 SERK was worse s I thought maybe it was the radial rear tire. The 14 SERK lasts longer  and did not howl as bad as the 07/ Never had a front cup. Billy
Title: Re: What did you do to or on your CVO today?
Post by: OBB on September 29, 2016, 05:01:48 PM
Pulled the radio, speakers, and amp from my 14. Going to replace the system with the new J&M Corp XXT ROKKER system.

Be Safe

THE DAWG
You said you pulled the radio. Are you replacing it with something else or just have to remove it to get to the other stuff?
Title: Re: What did you do to or on your CVO today?
Post by: FLTRCVO on September 29, 2016, 05:58:14 PM
Just a design flaw  is what Dunlop tells me. Can't be helped. riding in a straight line is bad as it moves the tread and I wears on the side. . MY 07 SERK was worse s I thought maybe it was the radial rear tire. The 14 SERK lasts longer  and did not howl as bad as the 07/ Never had a front cup. Billy
The reason I ask, the only tire I have ever cupped was on my 2007 CVO Road King and it was the first front tire. Back then all the Road King CVO's in my area were cupping per my dealer, thus, my dealer was breaking down the front ends of the motorcycles including forks rebuilding them with new seals after inspecting all the components along with replacing the steering bearing and adjusting it properly.(my mechanic said it came crappy from the factory) After that I never had cupping on the stock Dunlops.
Title: Re: What did you do to or on your CVO today?
Post by: DCFIREMANN on September 30, 2016, 12:41:04 AM
You said you pulled the radio. Are you replacing it with something else or just have to remove it to get to the other stuff?

Sent it out to get it re-flashed. Looking forward to see how this upgrade goes.

Be Safe

THE DAWG
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on September 30, 2016, 12:53:31 AM
Sent it out to get it re-flashed. Looking forward to see how this upgrade goes.

Be Safe

THE DAWG
What do you mean by "re flashed"? just the HD update?
Title: Re: What did you do to or on your CVO today?
Post by: OBB on September 30, 2016, 05:42:49 AM
Sent it out to get it re-flashed. Looking forward to see how this upgrade goes.

Be Safe

THE DAWG
Now that you say that, I remember reading that you said you were sending it to J&M instead of having the dealer do it so that way you're not taking any chances on it being done incorrectly.

What do you mean by "re flashed"? just the HD update?
flashed for the amp(s)
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on September 30, 2016, 08:02:10 PM
Got my fairing installed
Title: Re: What did you do to or on your CVO today?
Post by: OBB on September 30, 2016, 08:04:14 PM
Got my fairing installed

better late than never. Looks great.
Title: Re: What did you do to or on your CVO today?
Post by: TN on September 30, 2016, 08:09:22 PM
looks good, how do you like it MadDog?


TN
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on September 30, 2016, 08:20:00 PM
I really really like it Phil.

With the windshield I had on before at 80mph, like we was running on the BRPY a couple weeks ago, I would get a jiggle in my glasses that made seeing a little iffy. With this fairing and the flared shield, I now sit in a very stable bubble of air without any glasses jiggle at all.

Plus I think it really added a unique look to the sickle.

Only downside is I'm gonna have to move the signal lights. I've already located the stuff to move them down to the lower mount just gotta get time to move em.
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on September 30, 2016, 08:43:47 PM
Got my fairing installed
Looks good :2vrolijk_21:... we need more pics though.. what does it look like from the other side.

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on September 30, 2016, 08:47:53 PM
I don't have any from the back, didn't think to take none. It's a plain fairing though, no radio, just a 3 pocket bag mounted inside.
Title: Re: What did you do to or on your CVO today?
Post by: Jock on September 30, 2016, 08:50:25 PM
Got my fairing installed

Nice addition

 :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on September 30, 2016, 08:55:11 PM
I don't have any from the back, didn't think to take none. It's a plain fairing though, no radio, just a 3 pocket bag mounted inside.
Gotcha... looks good regardless. :2vrolijk_21:

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on September 30, 2016, 09:00:38 PM
Thanks Gary,

Course everybody knows Orange bikes look best...LOL :orange:
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on September 30, 2016, 09:14:44 PM
Thanks Gary,

Course everybody knows Orange bikes look best...LOL :orange:
Tru!!! 8)

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: OBB on September 30, 2016, 10:02:41 PM
Thanks Gary,

Course everybody knows Orange bikes look best...LOL :orange:
I'm starting to think it's a pre-requisite for a staff job around here. Naitram, d00d, JCZ.... you up to something there Mikey?
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on September 30, 2016, 10:10:27 PM
Not that I am aware of, but interesting ain't it!!!...


Title: Re: What did you do to or on your CVO today?
Post by: SneakyPete on October 01, 2016, 12:13:29 PM
Only downside is I'm gonna have to move the signal lights. I've already located the stuff to move them down to the lower mount just gotta get time to move em.

You going with the street glide turn signals or custom fabricating something?
Title: Re: What did you do to or on your CVO today?
Post by: Miss Susan on October 01, 2016, 01:07:15 PM
Street glide.

Miss Susan
Title: Re: What did you do to or on your CVO today?
Post by: SneakyPete on October 01, 2016, 05:42:10 PM
Street glide.

Miss Susan

Black or Chrome?
Title: Re: What did you do to or on your CVO today?
Post by: Nicky Pass on October 01, 2016, 06:02:54 PM
Got my fairing installed
I saw that on Xtreme Dimensions Facebook page....looks good!
Title: Re: What did you do to or on your CVO today?
Post by: toddhudson on October 01, 2016, 10:06:49 PM
Installed Fullsac Dx Pipe and 2.0 Inserts today. Tomorrow I will be programming with the TTR, have to find a PC laptop for the programming since I have all Macs in my house. Also received some goodies from Custom Dynamics today.
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on October 02, 2016, 08:21:27 AM
Black or Chrome?

They will be black to match the current ones. The parts I've acquired are from a 2012 strretglide (non- Canbus) and they are gonna be epoxy painted, then we will pull my lights off with wires and install the guts into the street glide turn signals, then put it all together.
Title: Re: What did you do to or on your CVO today?
Post by: Cat Eye on October 02, 2016, 09:58:00 AM
Got my fairing installed

Looks awesome....the SG-RK combo....nice
Title: Re: What did you do to or on your CVO today?
Post by: Cat Eye on October 02, 2016, 10:01:40 AM
Thanks Gary,

Course everybody knows Orange bikes look best...LOL :orange:

Orange is the cousin to Yellow.....just sayin while I ponder.....
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on October 02, 2016, 01:12:14 PM
Bath day for the bike, lots of bugs!

Maybe riding later, depending on how long the bath take :2vrolijk_21:
Title: What did you do to or on your CVO today?
Post by: MrSurly on October 02, 2016, 09:41:34 PM
I decided that I'm not going to put yet another belt on it.

ever

(http://uploads.tapatalk-cdn.com/20161003/fb0e7aeec70fb5fd70c97a548ad7b497.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: SneakyPete on October 03, 2016, 06:43:56 AM
They will be black to match the current ones. The parts I've acquired are from a 2012 strretglide (non- Canbus) and they are gonna be epoxy painted, then we will pull my lights off with wires and install the guts into the street glide turn signals, then put it all together.

Look forward to seeing that!
Title: Re: What did you do to or on your CVO today?
Post by: BigLew on October 03, 2016, 10:09:05 AM
You going with the street glide turn signals or custom fabricating something?
Mike I'll tell you something else you might consider. When I added the fairing to my 07 CVORG I ended up Tweaking the forks because of the added weight. You might consider heavier oil or different springs.

BigLew
Title: Re: What did you do to or on your CVO today?
Post by: RayG on October 03, 2016, 12:30:02 PM
I love what you did MrSurly.  Is there a write up of the parts used?  Been thinking about it for awhile now.
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on October 03, 2016, 03:04:49 PM
Mike I'll tell you something else you might consider. When I added the fairing to my 07 CVORG I ended up Tweaking the forks because of the added weight. You might consider heavier oil or different springs.

BigLew

Hey Man

Appreciate the feedback but I think I will be OK in this instance because the thing is so light, without a radio and all. Plus the 14 has cartridge forks at least in one side...

Pic for Dood
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on October 03, 2016, 04:47:20 PM
Hey Man

Appreciate the feedback but I think I will be OK in this instance because the thing is so light, without a radio and all. Plus the 14 has cartridge forks at least in one side...

Pic for Dood
:2vrolijk_21:

 :pumpkin:
Ride Safe,
Firedood
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: MrSurly on October 03, 2016, 08:45:46 PM
I love what you did MrSurly.  Is there a write up of the parts used?  Been thinking about it for awhile now.

I posted at length on another forum, I will PM a link.
Title: Re: What did you do to or on your CVO today?
Post by: wrayzor on October 04, 2016, 01:48:55 AM
Paid mine off! Now, what to buy next?
Title: Re: What did you do to or on your CVO today?
Post by: MrSurly on October 04, 2016, 07:59:44 PM
Paid mine off! Now, what to buy next?
Pay MINE off?


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on October 05, 2016, 06:53:06 AM
Yesterday out riding, when I stopped to get something out of the right saddle bag on the 17.  Found the new and improved bag fastener that screws in laying in the bottom of the bag.  Could not get it to screw in and catch for the life of me.

Figured out the reason, the right side of the bike had the old style wire clips so nothing for the screw fasteners to screw into.

Had dealer fix it.

I see Harley Quality control is still lacking at the factory. 
Title: Re: What did you do to or on your CVO today?
Post by: YELLOWBIRD on October 05, 2016, 08:21:23 AM
I put a king size sheet over my rig as I prepare for the Hurricane Matthew to visit the East Coast shoreline!

Not gonna be pretty.



 :'(

YB
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on October 05, 2016, 09:38:35 AM
I put a king size sheet over my rig as I prepare for the Hurricane Matthew to visit the East Coast shoreline!

Not gonna be pretty.



 :'(

YB

Good luck to you and all our friends on the coast.
Title: Re: What did you do to or on your CVO today?
Post by: Dan_Lockwood on October 05, 2016, 09:42:12 AM
Yesterday out riding, when I stopped to get something out of the right saddle bag on the 17.  Found the new and improved bag fastener that screws in laying in the bottom of the bag.  Could not get it to screw in and catch for the life of me.

Figured out the reason, the right side of the bike had the old style wire clips so nothing for the screw fasteners to screw into.

Had dealer fix it.

I see Harley Quality control is still lacking at the factory.

So the screw was never in?  Not trying to be a dick here, but I would have thought that the dealer or you would have caught that while checking out the bags at the dealership or you while putting stuff into the bag?  It was probably in the hole, but not threaded in.

I lost my left bag on my '09 SERG a few years ago.  The 1/4-turn pins were bent and still inside the bag when I got it back from someone that picked it up.  I rode home with my hands almost always on my saddle bags.  I've now gone to the J nuts and bolts, but I still check them out every ride to make sure they're snug.  At $1,725 for a new bag, I take precautions now just in case.
Title: Re: What did you do to or on your CVO today?
Post by: TNCarters on October 05, 2016, 09:50:08 AM
Dave, I had one amber turn lens and three smoked lens on my '15 when delivered.  Did not notice it till I got home and prepping to put CD led's on it.  While I'm sure selling dealer would have fixed it, it was easier to pick a lens up at a closer dealer and fix it myself than ride 50 miles round trip to get it fixed.  Guess that's what happens when assembly lines are combined.
Title: Re: What did you do to or on your CVO today?
Post by: pudgeyxj on October 05, 2016, 12:09:59 PM
Last week installed 16" Carlini Menace bars, and daymaker led passing lights, headlight, and led signals. Yesterday I ordered Rinehart pipes, a tuner, and booked a dyno tune/remap


Pretty stoked  :bananarock:
Title: Re: What did you do to or on your CVO today?
Post by: FLTRCVO on October 05, 2016, 04:12:57 PM
Yesterday out riding, when I stopped to get something out of the right saddle bag on the 17.  Found the new and improved bag fastener that screws in laying in the bottom of the bag.  Could not get it to screw in and catch for the life of me.

Figured out the reason, the right side of the bike had the old style wire clips so nothing for the screw fasteners to screw into.

Had dealer fix it.

I see Harley Quality control is still lacking at the factory.
Dave take the bag off and look at it under a good magnified light to make sure there are #1 no very, very fine cracks in the paint and #2 any chafing removed the clear-coat / damaged the paint due to the vibration and movement of a non secured hardbag. Same exact thing happened to me in 2002 with my 2001 RoadGlide, dealer did service didn't attach one of the pins one bag chafed on the ride home, dealer ordered new bag from Harley Paint Shop and replaced it. 
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on October 06, 2016, 07:20:43 AM
So the screw was never in?  Not trying to be a dick here, but I would have thought that the dealer or you would have caught that while checking out the bags at the dealership or you while putting stuff into the bag?  It was probably in the hole, but not threaded in.

I lost my left bag on my '09 SERG a few years ago.  The 1/4-turn pins were bent and still inside the bag when I got it back from someone that picked it up.  I rode home with my hands almost always on my saddle bags.  I've now gone to the J nuts and bolts, but I still check them out every ride to make sure they're snug.  At $1,725 for a new bag, I take precautions now just in case.

When looking at the bike, I did check the screws on the left bag, threaded one all the way out and back in.  Thought wow, a nice improvement.  Also thought they will take up some luggage space.  I did hit the rear one on the right bag putting rain gear and stuff in, it felt secure.  The front looked fine.  The bags never wiggled or moved.

The new bag pins are suppose to fix the old issue.  But it does not work if half the hardware is the old style with nothing for the new treaded pins to screw into.
Title: Re: What did you do to or on your CVO today?
Post by: RayG on October 06, 2016, 12:54:29 PM
MrSurly,   

Thank's for the link on the chain conversion, I did send a personal message wanted to make sure just in case I screwed up the reply.

RayG
Title: Re: What did you do to or on your CVO today?
Post by: bdcpv on October 07, 2016, 01:00:57 AM
yesterday i made this... switched to ultra.
Title: Re: What did you do to or on your CVO today?
Post by: MrSurly on October 07, 2016, 10:10:07 AM
MrSurly,   

Thank's for the link on the chain conversion, I did send a personal message wanted to make sure just in case I screwed up the reply.

RayG
Thanks for the note, I didn't see the PM but will find it. I'm following too many forums(!)
ediit, i can't find the 'sent' PM, either. I'll try again, as well as this http://harleytechtalk.org/htt/index.php/topic,91403.msg1089086.html#msg1089086
 (http://harleytechtalk.org/htt/index.php/topic,91403.msg1089086.html#msg1089086)
Title: Re: What did you do to or on your CVO today?
Post by: FAST380 on October 07, 2016, 05:39:01 PM
Added new wheels, tires, and flush axle kit to the front.
Title: Re: What did you do to or on your CVO today?
Post by: TNCarters on October 10, 2016, 05:20:57 PM
Finally got around to doing something Friday I've wanted to do a long time.  Got up early and rode the Natchez Trace from Loveless Café in Nashville all the way to Natchez and on to Alexandria to visit friends.  Its pretty right now with leaves beginning to turn.  Trace is 444 miles with 50 mph speed limit most of the way.  Did find south of Tupelo most people were going well over the speed limit.  Wanted to do this before the days get too short to finish before dark as wildlife is common on the road then.
Title: Re: What did you do to or on your CVO today?
Post by: DesertHOG on October 13, 2016, 02:35:01 PM
SOLD - 2015 FLTRUSE Burgundy Blaze/Typhoon Maroon
Title: Re: What did you do to or on your CVO today?
Post by: OBB on October 13, 2016, 04:10:23 PM
SOLD - 2015 FLTRUSE Burgundy Blaze/Typhoon Maroon
Sorry but also glad to read this. You've still got two other sets of wheels to keep you riding.
Title: Re: What did you do to or on your CVO today?
Post by: DesertHOG on October 13, 2016, 08:15:07 PM
Sorry but also glad to read this. You've still got two other sets of wheels to keep you riding.

I actually have 3 sleds left.

2009 FLTR - Galactic Wonder
2009 BMW R1200GS
2014 BMW K1600GT

All free and clear. Phew!

DH
Title: Re: What did you do to or on your CVO today?
Post by: HillCity on October 13, 2016, 08:22:56 PM
First day of the cold weather riding season.  Just back and forth to work but nice and toasty warm with the heated gear.  Not planning to let the cold weather cut the riding season short.
Title: Re: What did you do to or on your CVO today?
Post by: 110tHunDer on October 13, 2016, 09:27:48 PM
Same here.  I actually look forward to going to work this time of year.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on October 14, 2016, 06:04:35 AM
Same here.  I actually look forward to going to work this time of year.
You must love your job if you look forward to going to work.  :nixweiss:  :huepfenlol2:
Title: Re: What did you do to or on your CVO today?
Post by: 110tHunDer on October 14, 2016, 07:26:24 AM
I was only talking about the going/riding part.  :huepfenjump3:
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on October 14, 2016, 04:25:49 PM
Rode it!!! :carrot: :orange: :shocked2:

I know I'm now an ole fart.... it sure is a lot more bearable (and fun) to ride the bike when it's cool(er)... I can't take the summer heat anymore. :sweatdrop:

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: pudgeyxj on October 14, 2016, 05:44:32 PM
Well pipes (Rineharts) are on, and tune is done (direct link), and dyno'd. Got 92.65 HP and 114.7 TQ. Decatted head pipe, pipes and tuner, otherwise bone stock performance wise. Pretty impressed, I don't get the crackling and popping on decal any more. Seems to roll on to the highway a little nicer too. Didn't get too much of a ride in as the weather in BC is the chits for the next while, but I'll get out there whenever it dries out next.


Cheers  :drink:

P
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on October 14, 2016, 08:08:51 PM
Rode it!!! :carrot: :orange: :shocked2:

I know I'm now an ole fart.... it sure is a lot more bearable (and fun) to ride the bike when it's cool(er)... I can't take the summer heat anymore. :sweatdrop:

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:

Wow Gary!!!
Now ride your butt down to MV next year!
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on October 14, 2016, 08:14:08 PM
Wow Gary!!!
Now ride your butt down to MV next year!
MV... what's that?? :devil: :smartass: :wiseguy: :oops: :huepfenlol2: :huepfenlol2:

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on October 14, 2016, 08:55:10 PM
MV... what's that?? :devil: :smartass: :wiseguy: :oops: :huepfenlol2: :huepfenlol2:

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:

It's a magical place far, far, away from Charlottesville, in the beautiful mountains, where elk roam and CVO riders gather each September ...LOL

If you plan now you can make it happen!!! We all would love to see ya there.
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on October 15, 2016, 11:24:44 AM
Serviced the bike. . Ready to head to North Carolina on Wednesday. . Can't wait
 ;D
Title: Re: What did you do to or on your CVO today?
Post by: OBB on October 15, 2016, 08:57:08 PM
Serviced the bike. . Ready to head to North Carolina on Wednesday. . Can't wait
 ;D
Didn't you just head west about a month ago?
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on October 16, 2016, 09:09:04 AM
No.  Haven't been anywhere in a while. . This is going to be a great time. .  :)
Title: Re: What did you do to or on your CVO today?
Post by: HUBBARD on October 16, 2016, 08:19:32 PM
Cranked Ol Maybelle upon the jack, and let her run for 5-6 minutes, like I always do, with a few throttle bursts, after she warms up.  Now, I have a strong smell of gas in the garage.  Never experienced that.  Ever.  Been doin' it for years.  Cant's see any signs of gas leakin' anywhere.  WTF?  Do store Torco in the garage, but always have.  Vents on the Torco are always where they've been for years.  And, it's not a pure Torco smell.  I mean a strong gas smell!  Hope the phuck my garage don't explode!  I opened the windows, but very concerned.  :nixweiss:  Later--HUBBARD
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on October 16, 2016, 08:37:50 PM
Cranked Ol Maybelle upon the jack, and let her run for 5-6 minutes, like I always do, with a few throttle bursts, after she warms up.  Now, I have a strong smell of gas in the garage.  Never experienced that.  Ever.  Been doin' it for years.  Cant's see any signs of gas leakin' anywhere.  WTF?  Do store Torco in the garage, but always have.  Vents on the Torco are always where they've been for years.  And, it's not a pure Torco smell.  I mean a strong gas smell!  Hope the phuck my garage don't explode!  I opened the windows, but very concerned.  :nixweiss:  Later--HUBBARD
You took care of the "foreplay" (cranking her up) but didn't take her out (WFO) for a climax. :nixweiss: Only time I start mine is when I'm going to ride her... good for both of us. ;) :)

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: HillCity on October 16, 2016, 10:37:03 PM
Installed the new GoPro and took advantage of the excellent October weather here in Virginia.  Went for a 100 mile ride on the Blue Ridge Parkway and surrounding area roads.
Title: Re: What did you do to or on your CVO today?
Post by: FLTRCVO on October 17, 2016, 09:51:44 AM
Cranked Ol Maybelle upon the jack, and let her run for 5-6 minutes, like I always do, with a few throttle bursts, after she warms up.  Now, I have a strong smell of gas in the garage.  Never experienced that.  Ever.  Been doin' it for years.  Cant's see any signs of gas leakin' anywhere.  WTF?  Do store Torco in the garage, but always have.  Vents on the Torco are always where they've been for years.  And, it's not a pure Torco smell.  I mean a strong gas smell!  Hope the phuck my garage don't explode!  I opened the windows, but very concerned.  :nixweiss:  Later--HUBBARD
The smell of straight fuel, as if it were overflow at fill up, that strong?
Title: Re: What did you do to or on your CVO today?
Post by: HUBBARD on October 17, 2016, 12:15:33 PM
The smell of straight fuel, as if it were overflow at fill up, that strong?

Yep.  Later--HUBBARD
Title: Re: What did you do to or on your CVO today?
Post by: FLTRCVO on October 17, 2016, 04:11:00 PM
I'm guessing HUBBARD has a fuel leak of sorts, time to start with the most simple; the connection from the tank and go from there.
Title: Re: What did you do to or on your CVO today?
Post by: 110tHunDer on October 17, 2016, 07:18:20 PM
You sure it's not just the exhaust?  May just be running a bit rich on a cold start.

I agree with Gary.  Leave her "off" unless you're going for a ride.  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: dayne66 on October 17, 2016, 07:23:22 PM
I had to start the Wife's FLD to move it up the ramp into the 'bike annex'.......I let it warm up and revved it a few times....moved it up the ramp and shut 'er down. Had one garage door open while it was running ....and it still stunk like gas for when I went back out.......so I opened both doors and aired it out good.
Title: Re: What did you do to or on your CVO today?
Post by: FLTRCVO on October 18, 2016, 12:23:41 AM
I am guessing HUBBARD has done this same exact thing many times in the past under the same conditions and not encountered this problem, thus, this is why he has brought it to our attention.
I have a Handy motorcycle lift I run my motorcycle for 30 minutes sometimes and I don't have a strong smell of un-burnt fuel / straight fuel. I have never encountered the smell of straight fuel unless it overflowed during the filling process and I believe this is the type of odor HUBBARD is referring to.
However, I could be totally wrong.
Title: Re: What did you do to or on your CVO today?
Post by: longlast on October 18, 2016, 01:17:16 AM
Cranked Ol Maybelle upon the jack, and let her run for 5-6 minutes, like I always do, with a few throttle bursts, after she warms up.  Now, I have a strong smell of gas in the garage.  Never experienced that.  Ever.  Been doin' it for years.  Cant's see any signs of gas leakin' anywhere.  WTF?  Do store Torco in the garage, but always have.  Vents on the Torco are always where they've been for years.  And, it's not a pure Torco smell.  I mean a strong gas smell!  Hope the phuck my garage don't explode!  I opened the windows, but very concerned.  :nixweiss:  Later--HUBBARD

I've had the same thing the ood time. When I've been out and come back and don't put the bike in the garage it may sit in the driveway for the day. Then when I do put it in l have to fire it up( as l can't push it in ) once I'm in l let it run for a few minutes then shut it off. That's when I smell gas as well, it doesn't happen often but it does happen.
I put it down to at the moment the motor is shut down and the pots not being as hot that an exhaust valve is open and it's the gas vapor from that pot coming out of the tail pipe that you smell.
If it happens again give a smell at the tail pipes you'll most likely smell it to be the strongest there. The same thing goes for the intake the small could be strongest at the air filter.
If you do have a concern of a leak but can't see a leak look for a white ring like stain . Gas that has been vaporised on a hot metal can leave a stain.
Title: Re: What did you do to or on your CVO today?
Post by: longlast on October 18, 2016, 01:33:19 AM
Did a little upgrade today. I removed the stupid little straight grease nipple for the yoke steering bearings that you can't get onto for greasing the bearings,..not with out removing other things to access it. Simple solution l installed a 45 angle fitting. Why a straight is used in the first place  :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: MrSurly on October 18, 2016, 09:01:31 AM
Yep.  Later--HUBBARD

Most likely suspect is the O-ring in the fuel quick-connect on the bottom of the tank. This can drip raw gas onto the rear head, where it will rapidly evaporate, effectively hiding the evidence.
Fold a paper towel and stick it into the fins of the head, look for staining and stink on the towel.
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on October 18, 2016, 09:04:18 AM
Most likely suspect is the O-ring in the fuel quick-connect on the bottom of the tank. This can drip raw gas onto the rear head, where it will rapidly evaporate, effectively hiding the evidence.
Fold a paper towel and stick it into the fins of the head, look for staining and stink on the towel.

eeeuuwww.... :-[

as one gets older, that can happen much more often....
Title: Re: What did you do to or on your CVO today?
Post by: FXD_TG on October 18, 2016, 10:13:47 PM
Getting Blue II ready for the ride down to Panama City Beach on Thursday morning. We'll leave around 6:00am Eastern Standard and should be at Sharky's for lunch at the Tiki bar shortly after 11:00am Central Time.

I also swapped out the 2.4 oz expanded aluminum "screen door inserts" on our lower's wind deflector doors with .4 oz aluminum mesh material.  The expanded aluminum was just too heavy and caused the doors to vibrate too much: expecting the very light mesh to be about as good as it's going to get.  Still need to put down a bead of RTV sealant or black hot melt glue around the wire mesh perimeter to bond it to the door / eliminate metal on plastic virbration.

(https://ridingtwoup.files.wordpress.com/2016/10/screendoors2.jpg?w=700)
(https://ridingtwoup.files.wordpress.com/2016/10/2ndgen_screendoors.jpg?w=700)
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on October 28, 2016, 08:40:46 PM
Took another 80 mile (short by some standards) ride... weather was great (I can certainly put on more clothes than I can take off to ride... leather jacket & jeans today). Combination of two lane roads w/some interstate to stretch it out a bit.... all in all it was a good day to ride to empty the tank and get some fresh fuel in the bike. :2vrolijk_21:

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on October 28, 2016, 10:33:14 PM
Glad you got to ride some Gary, gonna be even warmer tomorrow.

I got to ride a little this afternoon too. I found that the Memphis shades fairing was not Hillbilly Rocket Rider rated. I had changed the angle of it a bit a week or so ago, to make it look more like the way the regular fairings do, because apparently when I originally mounted it I had it kind of laying back too much. Well everything went good up til 100 MPH at which point I noticed that the fairing was migrating back to its original laid back position. LOL

I guess when I tightened the bolts in the adjustable bracket, I didn't get them tight enough and the force pushed it back. No harm no foul, and after a readjustment with additional tightening all seems good. I plan to try it again tomorrow.
Title: Re: What did you do to or on your CVO today?
Post by: cmashark on October 31, 2016, 02:54:31 AM
Traded in my 13 for a 17.

Out with the old, in with the new...

Old:
(http://img.photobucket.com/albums/v469/cmashark/image_16.jpeg) (http://smg.photobucket.com/user/cmashark/media/image_16.jpeg.html)

New:
(http://img.photobucket.com/albums/v469/cmashark/IMG_1311.jpg) (http://smg.photobucket.com/user/cmashark/media/IMG_1311.jpg.html)
Title: Re: What did you do to or on your CVO today?
Post by: HillCity on October 31, 2016, 06:02:37 AM
Congrats!  Love that color.
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on October 31, 2016, 07:48:26 AM
Congrats!  Love that color.
X2, liked the old bike too!
Title: Re: What did you do to or on your CVO today?
Post by: BigLew on October 31, 2016, 04:14:58 PM
Very nice!

BigLew
Title: Re: What did you do to or on your CVO today?
Post by: pudgeyxj on October 31, 2016, 05:27:19 PM
What size windshield is that on the R/K you traded in?


Paul  :drink:
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on October 31, 2016, 08:56:55 PM
took the hot rod out n beat on it... :2vrolijk_21: havent rode it much since i got the 16
Title: Re: What did you do to or on your CVO today?
Post by: cmashark on October 31, 2016, 11:00:45 PM
What size windshield is that on the R/K you traded in?


Paul  :drink:

That was the standard size RK shield that came factory on the Road Kings.  19 inch, I believe.

Chris
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on November 03, 2016, 07:25:54 AM
Rode the 17 SESG to FL Sunday and home yesterday, have just over 4100 miles on her now.  Today I will be doing the fullsac baffles for it.

I have already put 14" Yaffe monkey bars on it, CVO limited heated grips, Yaffe black plate frame, CB module and antenna, and quick detach hard ware.  Also did the rider back rest, removed the passenger pegs and using them for hwy pegs.
Title: Re: What did you do to or on your CVO today?
Post by: Rooster on November 03, 2016, 03:45:19 PM
Getting Blue II ready for the ride down to Panama City Beach on Thursday morning. We'll leave around 6:00am Eastern Standard and should be at Sharky's for lunch at the Tiki bar shortly after 11:00am Central Time.

I also swapped out the 2.4 oz expanded aluminum "screen door inserts" on our lower's wind deflector doors with .4 oz aluminum mesh material.  The expanded aluminum was just too heavy and caused the doors to vibrate too much: expecting the very light mesh to be about as good as it's going to get.  Still need to put down a bead of RTV sealant or black hot melt glue around the wire mesh perimeter to bond it to the door / eliminate metal on plastic virbration.

(https://ridingtwoup.files.wordpress.com/2016/10/screendoors2.jpg?w=700)
(https://ridingtwoup.files.wordpress.com/2016/10/2ndgen_screendoors.jpg?w=700)
Nice. Looks cool, great idea. :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on November 04, 2016, 06:45:02 AM
Did the Fullsac 2.25 baffles on my 17 SERG and took a short ride.  Sounds is a bit deeper but not much louder at all.  Tells me this cat is really holding back a lot. 

Plan to wash her this morning and ride over to Smoky Mountain HD for a bit.
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on November 04, 2016, 10:31:04 AM
Picked up some oil and a filter, hope to have a little riding time this weekend and be able to change the oil.
Title: Re: What did you do to or on your CVO today?
Post by: Singlebeam on November 04, 2016, 03:13:09 PM
Changed my oil yesterday, 1130 miles. Changed the windshield trim out today. Went from chrome to black. The chrome just looked out of place to me. Before and after pics below.
Title: Re: What did you do to or on your CVO today?
Post by: Singlebeam on November 04, 2016, 03:14:53 PM
after....
Title: Re: What did you do to or on your CVO today?
Post by: HillCity on November 04, 2016, 05:25:02 PM
Looks great with the black trim!  Much better than the chrome on your bike.
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on November 05, 2016, 01:57:44 AM
after....
That does look great!
Title: Re: What did you do to or on your CVO today?
Post by: Mr D on November 05, 2016, 07:52:23 AM
Looks great with the black trim!  Much better than the chrome on your bike.

X2  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on November 05, 2016, 08:30:49 AM
after....

Looks great on your bike.  Do not think it would on mine as the Atomic red bike is Black were yours is orange and red where yours is black.
Title: Re: What did you do to or on your CVO today?
Post by: JoeVibe on November 05, 2016, 04:07:21 PM
I put a J&M handlebar CB on the RK before Maggie Valley but I couldn't stand the headset pigtail hanging out from the seat so I bought a Harley plug from the dealer and did some rewiring and installed it in my console. I think it looks much better!
Title: Re: What did you do to or on your CVO today?
Post by: 110tHunDer on November 05, 2016, 06:09:53 PM
That turned out nice, Joe!
Title: Re: What did you do to or on your CVO today?
Post by: OBB on November 05, 2016, 06:21:43 PM
I put a J&M handlebar CB on the RK before Maggie Valley but I couldn't stand the headset pigtail hanging out from the seat so I bought a Harley plug from the dealer and did some rewiring and installed it in my console. I think it looks much better!
Nice work Joe  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Singlebeam on November 06, 2016, 10:49:15 AM
Yes that's much better...
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on November 07, 2016, 07:00:52 AM
Will be riding over to Smoky Mountain HD to have the 5K service done on the 17SESG. 
Title: Re: What did you do to or on your CVO today?
Post by: Mr D on November 07, 2016, 09:45:43 AM
Will be riding over to Smoky Mountain HD to have the 5K service done on the 17SESG.

Say hello to "Big" Dave Reuland if he's still there, I haven't chatted with him in a while.
Tell him from the two Tom's in Illinois Sr & Jr
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on November 08, 2016, 06:37:33 AM
Say hello to "Big" Dave Reuland if he's still there, I haven't chatted with him in a while.
Tell him from the two Tom's in Illinois Sr & Jr

Yes, he is still there.  A very nice guy, and has become a friend over the past few years. 
Title: Re: What did you do to or on your CVO today?
Post by: Mr D on November 08, 2016, 08:27:00 AM
Yes, he is still there.  A very nice guy, and has become a friend over the past few years.

 :2vrolijk_21:

Dave Jr. Joined the team too at one time
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on November 09, 2016, 07:39:25 AM
:2vrolijk_21:

Dave Jr. Joined the team too at one time
Yes Tiny worked in Service, then Parts, then Sales.  Not sure where he is now, its been two months since I have seen him.
Title: Re: What did you do to or on your CVO today?
Post by: BigLew on November 09, 2016, 12:23:50 PM
Hey Dave when you going over for service?

BigLew
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on November 10, 2016, 06:48:44 AM
Hey Dave when you going over for service?

BigLew
I went over on the 7th, this past Monday to have the 5K service.  Went over again Tuesday to do the Ridemore ride.
Title: Re: What did you do to or on your CVO today?
Post by: BigLew on November 10, 2016, 12:01:05 PM
Dang I was going to try and hook up.

BigLew
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on November 11, 2016, 06:02:51 AM
Dang I was going to try and hook up.

BigLew
If weather is good next Tuesday I will be going over to do the Ridemore ride, which leaves out at 10:00 from SMHD
Title: Re: What did you do to or on your CVO today?
Post by: BASTOS on November 13, 2016, 08:37:50 PM
I had mine picked up and sent back to my dealer for 12" bars and Stage 2 audio install.
I should get it back when I arrive home Thursday or Friday. Then doing an Iron Butt ride and knocking down 1500 miles in under 24 hours.


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on November 13, 2016, 10:39:13 PM
I had mine picked up and sent back to my dealer for 12" bars and Stage 2 audio install.
I should get it back when I arrive home Thursday or Friday. Then doing an Iron Butt ride and knocking down 1500 miles in under 24 hours.


Sent from my iPhone using Tapatalk
Exciting! let us know how the ride goes. I know it will  be difficult but try and take some pics along the way when you do stop..
Title: Re: What did you do to or on your CVO today?
Post by: 68 XLCH on November 14, 2016, 10:50:06 PM
Changed out my air filter to a K and N.
Title: Re: What did you do to or on your CVO today?
Post by: DCC on November 19, 2016, 01:59:26 PM
Installed my radio head unit that I just got back from Iron Cross Audio.  Can't say enough good things about them.  They had my radio fixed and back to me in less than two weeks.  And Kudos to this forum since this is where I learned about Iron Cross.  Now, I just need to get some of that warm weather back.  Bottom fell out last night and am feeling a good blast of winter wind here in Iowa.
Title: Re: What did you do to or on your CVO today?
Post by: FLTRCVO on November 19, 2016, 05:42:33 PM
One of my friends 2012 Street Glide and I took a ride through Death Valley National Park this morning, temperature was 31 degrees when we arrived at 8am, grabbed lunch and departed. Great ride 343 mile half day trip.
Title: Re: What did you do to or on your CVO today?
Post by: Spiderman on November 25, 2016, 01:15:41 PM
Screamin_Beagle has been swapping out the stocck handlebars on Elvis II (my 3rd 2003 FLHRSEI2) to a nice 12" set of Wild-1 Chubby's.  Hope to get that finished up today

B B
Title: Re: What did you do to or on your CVO today?
Post by: Bav on November 26, 2016, 12:03:15 PM
Fitted a Black Ice Agitator front wheel to my 2014 SERK. Now to get the rear done.

(http://uploads.tapatalk-cdn.com/20161126/fad10063c738220d29503c0903b0657e.jpg)


Sent from my iPad using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: FLTRCVO on November 26, 2016, 05:28:49 PM
Fitted a Black Ice Agitator front wheel to my 2014 SERK. Now to get the rear done.

(http://uploads.tapatalk-cdn.com/20161126/fad10063c738220d29503c0903b0657e.jpg)


Sent from my iPad using Tapatalk
That is a nice looking combination.
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on November 27, 2016, 04:34:53 PM
Went for a short ride today, changed the oil. 
Title: Re: What did you do to or on your CVO today?
Post by: Rooster on November 29, 2016, 05:00:57 PM
Screamin_Beagle has been swapping out the stocck handlebars on Elvis II (my 3rd 2003 FLHRSEI2) to a nice 12" set of Wild-1 Chubby's.  Hope to get that finished up today

B B
Good to hear from you Brian. Hope you and yours are doing fine. Tell Beags hi for me as well.
Title: Re: What did you do to or on your CVO today?
Post by: 03Lightningrocks on November 29, 2016, 09:43:48 PM
Took her to the Doctor at my local Harley shop for some warranty work.
Title: Re: What did you do to or on your CVO today?
Post by: dayne66 on November 29, 2016, 10:37:19 PM
Took her to the Doctor at my local Harley shop for some warranty work.
Lucky you...my local dealer has Quacks!
Title: Re: What did you do to or on your CVO today?
Post by: Spiderman on November 30, 2016, 04:06:09 PM
Good to hear from you Brian. Hope you and yours are doing fine. Tell Beags hi for me as well.

Moving to Fresno in two weeks to be close to Grandkids
  Do we have any members in Fresno ?

B B
Title: Re: What did you do to or on your CVO today?
Post by: 03Lightningrocks on December 01, 2016, 11:22:53 AM
Lucky you...my local dealer has Quacks!



I feel you. Mine has a few of those but I request and am granted a couple specific technicians. Sometimes I have to wait an extra day or three to get them but well worth it. I usually tip my guy pretty well, depending on the work. That extra bit appreciation I show comes back ten fold.
Title: Re: What did you do to or on your CVO today?
Post by: BASTOS on December 01, 2016, 10:27:53 PM
A week and a half ago, did the 1500/24 Iron Butt ride. 2nd year in a row. (http://uploads.tapatalk-cdn.com/20161202/ad18e3538873f6bf922d1ef9fdde311d.jpg)


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: DesertHOG on December 01, 2016, 10:43:10 PM
A week and a half ago, did the 1500/24 Iron Butt ride. 2nd year in a row. (http://uploads.tapatalk-cdn.com/20161202/ad18e3538873f6bf922d1ef9fdde311d.jpg)


Sent from my iPhone using Tapatalk

Congrats, that is quite an achievement. I have done 3 SS1000 now but never a BBG (Butt Burner Gold).
Title: Re: What did you do to or on your CVO today?
Post by: Jock on December 02, 2016, 08:40:03 AM
A week and a half ago, did the 1500/24 Iron Butt ride. 2nd year in a row. (http://uploads.tapatalk-cdn.com/20161202/ad18e3538873f6bf922d1ef9fdde311d.jpg)


Sent from my iPhone using Tapatalk

(http://www.blueridgemuse.com/wp-content/uploads/2015/04/attaboy-575x327.png)
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on December 06, 2016, 10:41:37 PM
Sad to say i cleaned the bike and put it up for the winter, snow flying here soon which means salt and chemicals on the roads till spring.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on December 12, 2016, 07:30:55 AM
Saturday I put a Klock Werks 6" shield on my 17 CVO Street Glide.  Looks good, lifts the air a bit more than the factory shield.  Unfortunately  it was to cold to test with the half helmet.  I did manage a nice 215 mile ride along the Ocoee and the mountains.  It was a nice 30 degrees out and clear.  Should be able to get a good test on the windshield in FL at Christmas.
Title: Re: What did you do to or on your CVO today?
Post by: longlast on December 14, 2016, 03:38:48 PM
Installed a Cree LED headlight bulb. Thought I would have to do a bit of rewire but it was a straight plug&play :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Supershooter on December 18, 2016, 10:19:31 PM
-20 air temp plus windchill this morning, so after a cup of coffee, I took the kids to the shop and we cleaned a gun and a SESG. Tore apart my BMW project bike...What else is there to do when It's this cold. ;D

Supershooter
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on December 20, 2016, 08:37:54 AM
I went for a short 172 mile ride yesterday afternoon after a week of rain.  It was a nice balmy 35 degrees out.  However it was beautiful up through Oakridge, Oliver Springs, Warburg, Starbrite, Hariman and Rookwood.  Top of Frozen head was snow covered.
Title: Re: What did you do to or on your CVO today?
Post by: porthole on December 20, 2016, 08:40:45 AM
-20 air temp plus windchill this morning, so after a cup of coffee, I took the kids to the shop and we cleaned a gun and a SESG. Tore apart my BMW project bike...What else is there to do when It's this cold.



Nice, you have a drain in your garage. We can't have them anymore.
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on December 20, 2016, 10:57:04 AM
I went for a short 172 mile ride yesterday afternoon after a week of rain.  It was a nice balmy 35 degrees out.  However it was beautiful up through Oakridge, Oliver Springs, Warburg, Starbrite, Hariman and Rookwood.  Top of Frozen head was snow covered.

I didn't hear you blow the horn or wave when you went by my house, Dave.... ;D :huepfenlol2: :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Panhead_Jimmy on December 20, 2016, 05:30:46 PM
Took my '17 SG in for a 117 kit install, rode a bus back home (bus people are an interesting lot), then walked 1/4 mile home in 80* sunshine.  Life is really freakin' good!!
Title: Re: What did you do to or on your CVO today?
Post by: ultrafxr on December 20, 2016, 05:51:24 PM
Took my '17 SG in for a 117 kit install, rode a bus back home (bus people are an interesting lot), then walked 1/4 mile home in 80* sunshine.  Life is really freakin' good!!

Smart azz.  Gotta rub it in don't ya.   :huepfenlol2:
15 degrees yesterday but promising to be in upper 40s tomorrow.  So maybe . . .
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on December 21, 2016, 06:33:57 AM
Planning on doing the Ridemore ride today.  Looks like it will be 27 when I start but should make high 40's today.
Title: Re: What did you do to or on your CVO today?
Post by: Indenial on December 21, 2016, 12:28:29 PM
Sunday my truck showed -25 degrees as we drove to Mpls for a Sunday School program for granddaughter.  I think that the coldest I've been in.
Title: Re: What did you do to or on your CVO today?
Post by: Supershooter on December 21, 2016, 10:34:00 PM
Sunday my truck showed -25 degrees as we drove to Mpls for a Sunday School program for granddaughter.  I think that the coldest I've been in.

We were supposed to go to New Ulm, for Christmas, but my brother law so no to traveling in such cold conditions so everyone stayed home, which was fine with us, I needed to make sure our cattle had running water during the extreme cold.

Supershooter 
Title: Re: What did you do to or on your CVO today?
Post by: Supershooter on December 21, 2016, 10:36:33 PM

Nice, you have a drain in your garage. We can't have them anymore.

I didn't ask...but I don't think it's illegal here

Supershooter
Title: Re: What did you do to or on your CVO today?
Post by: dayne66 on December 21, 2016, 11:36:30 PM
I didn't ask...but I don't think it's illegal here

Supershooter
One house we built I wanted a floor drain and found out they were not allowed.....I put one in the middle of the garage and spray foamed it in and poured right over it....after 'occupancy' was given tapped the concrete and dug the foam away.
Title: Re: What did you do to or on your CVO today?
Post by: Billy on December 22, 2016, 05:25:06 PM
The reason for no floor drain is that if gas were to leak under the slab you would have one giant bomb.     Billy
Title: Re: What did you do to or on your CVO today?
Post by: Road Dad on December 22, 2016, 08:29:37 PM
That is not the reason. (It might be your reason if you frequently have gas spills) but as far as reasoning for drains in residential areas that's not it.

The reason for no floor drain is that if gas were to leak under the slab you would have one giant bomb.     Billy
Title: Re: What did you do to or on your CVO today?
Post by: porthole on December 22, 2016, 08:35:42 PM
DEP and environmental pollution.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on December 29, 2016, 07:16:50 AM
Took the 17 Street glide for a short ride, have 7212 miles on her now.  Fly out to work this morning so, she will be sitting for 21 days.
Title: Re: What did you do to or on your CVO today?
Post by: Grizzly on December 29, 2016, 09:41:59 AM
Gave her a coat of wax getting ready for our annual Polar Bear Ride on Jan 1st.
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on December 31, 2016, 04:29:01 PM
Rode today.  72 and sunshine.   ;D ;D
Title: Re: What did you do to or on your CVO today?
Post by: 110tHunDer on December 31, 2016, 05:03:47 PM
^^^  :sauer021: :sauer021: :sauer021:
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on December 31, 2016, 07:35:38 PM
Rode today.  72 and sunshine.   ;D ;D
Maybe I will have that chance next year, house should be done in SW FL by then.
Title: Re: What did you do to or on your CVO today?
Post by: YELLOWBIRD on December 31, 2016, 08:40:36 PM
Rode today.  72 and sunshine.   ;D ;D





Left for a ride today at 9:15am. It was 27 and sunny!!!


I hate you Stu! Lol


YB
Title: Re: What did you do to or on your CVO today?
Post by: Aussie on January 06, 2017, 08:42:48 PM
Put an Indicator Lamp Bezel on I made out of a scrap piece of stainless.


(http://i366.photobucket.com/albums/oo102/antongrech/FLHXSE3/IMG_0910_zpsulx3yjik.jpg)

(http://i366.photobucket.com/albums/oo102/antongrech/FLHXSE3/IMG_0898_zpspwhupjsy.jpg)

Title: Re: What did you do to or on your CVO today?
Post by: 110tHunDer on January 06, 2017, 08:44:57 PM
 
Holy crap!  That looks amazing!!! :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: BostonboyDH on January 06, 2017, 09:07:55 PM

  I love it and I want one!!!! :2vrolijk_21:

BostonBoy
Title: Re: What did you do to or on your CVO today?
Post by: Jock on January 06, 2017, 09:24:26 PM
Put an Indicator Lamp Bezel on I made out of a scrap piece of stainless.


(http://i366.photobucket.com/albums/oo102/antongrech/FLHXSE3/IMG_0910_zpsulx3yjik.jpg)

(http://i366.photobucket.com/albums/oo102/antongrech/FLHXSE3/IMG_0898_zpspwhupjsy.jpg)

 :2vrolijk_21:  NICE
Title: Re: What did you do to or on your CVO today?
Post by: BASTOS on January 07, 2017, 08:37:12 AM
(http://uploads.tapatalk-cdn.com/20170107/3c5059e4ce63a3024020c4a38bd306bc.jpg)

Gave the motor a splash of color, new plug wires.


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Grizzly on January 07, 2017, 08:41:16 AM
Put an Indicator Lamp Bezel on I made out of a scrap piece of stainless.


(http://i366.photobucket.com/albums/oo102/antongrech/FLHXSE3/IMG_0910_zpsulx3yjik.jpg)

(http://i366.photobucket.com/albums/oo102/antongrech/FLHXSE3/IMG_0898_zpspwhupjsy.jpg)

Very nice indeed!  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: cmashark on January 07, 2017, 11:44:16 AM
Stared at it.  >:(
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on January 08, 2017, 10:37:10 AM
What's all that white stuff in that pic?  8)
Title: Re: What did you do to or on your CVO today?
Post by: TNCarters on January 08, 2017, 11:15:49 AM
That white stuff goes along with the 8 degrees this morning.  Thought we lived in the south!
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on January 08, 2017, 12:51:07 PM
thats what happens when every body leaves the stock exhaust on their new Harley  :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: cmashark on January 08, 2017, 01:32:44 PM
What's all that white stuff in that pic?  8)

It's garbage!  It condemns my bikes to the garage and tries to rot my Jeep!  I wanna move back to Pensacola.  :(
Title: Re: What did you do to or on your CVO today?
Post by: cmashark on January 08, 2017, 01:34:26 PM
thats what happens when every body leaves the stock exhaust on their new Harley  :nixweiss:

 ;D. I'm trying to get thru 6 months/5K miles before I mod this new M8.  Gotta give it an opportunity to break, unassisted.  Lol
Title: Re: What did you do to or on your CVO today?
Post by: Bav on January 08, 2017, 02:01:01 PM
Went out on the bike yesterday and today. It's been 10 degrees C here (50F). Not the CVO though. That's in the garage in bits having its winter strip down clean.


Sent from my iPad using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Jaxcvo on January 10, 2017, 07:12:41 PM
Put her Christmas presents on today😁
Title: Re: What did you do to or on your CVO today?
Post by: Jaxcvo on January 10, 2017, 07:14:25 PM
.
Title: Re: What did you do to or on your CVO today?
Post by: Jaxcvo on January 10, 2017, 07:18:20 PM
.
Title: Re: What did you do to or on your CVO today?
Post by: Jaxcvo on January 10, 2017, 07:20:24 PM
Kury license plate bracket, HD highway pegs and mounts, custom dynamics signals, HD chrome contour mirrors, and the HD garage door opener. Done for now lol.
Title: Re: What did you do to or on your CVO today?
Post by: Eazily9 on January 12, 2017, 08:24:59 PM
(https://uploads.tapatalk-cdn.com/20170113/3fdeb2601eadd2b9b42f848bc8ae3324.jpg)

Mounting bracket and detachable short Sissy bat with pad.


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Eazily9 on January 12, 2017, 08:26:03 PM
(https://uploads.tapatalk-cdn.com/20170113/63fba0a264e3a8e2340365350c01a8c6.jpg)


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on January 12, 2017, 09:19:13 PM
Very nice!
Title: Re: What did you do to or on your CVO today?
Post by: Eazily9 on January 12, 2017, 10:11:44 PM
Very nice!




Sent from my iPad using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Eazily9 on January 12, 2017, 10:13:31 PM
Very nice!
(https://uploads.tapatalk-cdn.com/20170113/3a50f924e4c406315eb9d5e2cd902baa.jpg)

Thanks man! I also watched the sunset here in GA in January!!



Sent from my iPad using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: acevtwin on January 13, 2017, 10:38:35 AM
Got my new Chopped Tour Pak put on.
Title: Re: What did you do to or on your CVO today?
Post by: longlast on January 14, 2017, 02:33:30 AM
15k out of this factory boot, hope this new one does as well.
Title: Re: What did you do to or on your CVO today?
Post by: Antony031 on January 15, 2017, 07:03:03 PM
Put the highway pegs back on still not happy with them.
Title: Re: What did you do to or on your CVO today?
Post by: RGlideKid on January 16, 2017, 07:28:07 AM
Started working on getting the routes put into the HOG ride planner for June's get-together in Eureka Springs.  I dislike their software but choices are limited.
Hopefully I'm doing it right and have 3 of the almost 20 rides done now!
If anyone knows of some good instructional videos on using the ride planner, please PM the links to me!
Title: Re: What did you do to or on your CVO today?
Post by: OBB on January 16, 2017, 08:54:16 AM
Started working on getting the routes put into the HOG ride planner for June's get-together in Eureka Springs.  I dislike their software but choices are limited.
Hopefully I'm doing it right and have 3 of the almost 20 rides done now!
If anyone knows of some good instructional videos on using the ride planner, please PM the links to me!
Make the routes public and post up a link or your name that you're using them under. We should be able to log in under our name, find them and download them.
Title: Re: What did you do to or on your CVO today?
Post by: RGlideKid on January 16, 2017, 10:40:02 AM
Make the routes public and post up a link or your name that you're using them under. We should be able to log in under our name, find them and download them.

Mike,
I PM'd Neal and he's made the change so now we can directly upload .gpx files in a post just like we can .jpg files.  This will very handy for all of us wishing to quickly share rides.
I will start a new thread today for routes in the event chatter section.  Stay tuned!
Title: Re: What did you do to or on your CVO today?
Post by: OBB on January 16, 2017, 05:37:02 PM
Mike,
I PM'd Neal and he's made the change so now we can directly upload .gpx files in a post just like we can .jpg files.  This will very handy for all of us wishing to quickly share rides.
I will start a new thread today for routes in the event chatter section.  Stay tuned!
  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: cmashark on January 17, 2017, 11:32:01 PM
Can these routes be loaded into the bikes stock navigation?

Edit:  never mind, I saw the thread in event chatter.  Thank you for posting all the routes :biggthumpup:
Title: Re: What did you do to or on your CVO today?
Post by: RGlideKid on January 20, 2017, 02:50:04 PM
Can these routes be loaded into the bikes stock navigation?

Edit:  never mind, I saw the thread in event chatter.  Thank you for posting all the routes :biggthumpup:

If you're asking if your BoomBox nav system will take .gpx files from a memory stick, the answer is yes.
PM me if you have any questions about this.
Title: Re: What did you do to or on your CVO today?
Post by: RGlideKid on January 20, 2017, 02:51:12 PM
The new CVO Boom Box update is available as of Jan 17th.  I just got done installing mine.  Hopefully it won't bung things up for me with the radio!   :'(
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on January 22, 2017, 08:32:59 AM
Yesterday I updated the radio software.  I was unable to get it to update the dealer locations.  Rode it 140 miles yesterday and the software seems ok.  Will ride to Key West next week so it will be a good test.

Today I again tried to update the dealer locations.  Could not get it to work.  Keep getting a Navsysc Error.
Title: Re: What did you do to or on your CVO today?
Post by: TheGullGuy on January 22, 2017, 10:45:22 AM

Today I again tried to update the dealer locations.  Could not get it to work.  Keep getting a Navsysc Error.

After successfully installing software ver 1.20.3 I cleaned the thumb drive and extracted the dealer location zip files and placed them on the root directory.  Nothing happens. . .  I'm also looking for some help with the installation process for the dealer locations upgrade. 
Title: Re: What did you do to or on your CVO today?
Post by: RoadTrip on January 22, 2017, 11:50:08 AM
GullGuy, what files do you have showing in the root directory of the USB file?
Title: Re: What did you do to or on your CVO today?
Post by: TheGullGuy on January 22, 2017, 05:02:59 PM
GullGuy, what files do you have showing in the root directory of the USB file?

Once I extract the downloaded zip file I end up with one folder named [nng] and one file named [swdl.iso] on the root directory.   Contained in the nng folder are some folders, subfolders and files.  I even tried removing every file in every folder and subfolder and placing all files on the root.  Nothing happens.  I'm obviously doing something wrong but I can't figure out what that might be. 

I am assuming that, as with the updates, the radio should recognize the update on the thumb drive and perform the installation automatically.  Yes?
Title: Re: What did you do to or on your CVO today?
Post by: RoadTrip on January 22, 2017, 08:23:32 PM
Well, the only recommendation I can offer is to start fresh using the following steps...

- Reformat the USB stick using FAT32 format
- Download the Dealer Location Update from H-D site to your computer (not the USB drive)
- Unzip the zip file: Harley_POI_Maps
- Open the folder: Harley_POI_Maps
- Copy BOTH the nng folder and swdl disc image file (swdl.iso) to your USB drive
- Turn on your Infotainment system (using Accessory or turning the switch on)
- Once you accept the Warning screen, plug in the USB drive and it will load into your Infortainment system the same as the system update

No other files (e.g. zip file or other folders) should be in the root directory of the USB drive and all the sub-folders and files should remain in the nng folder. The update software is extremely picky on this point! Good luck!
Title: Re: What did you do to or on your CVO today?
Post by: TheGullGuy on January 23, 2017, 10:52:26 AM

 . . . No other files (e.g. zip file or other folders) should be in the root directory of the USB drive . . . Good luck!

I’ve always used the same USB drive for updates and have always kept my music on the root dir.  Cleaned the drive, reloaded, and success. 

SPOT on suggestion ….

Thanks a million . . . frustration over . .  .
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on January 24, 2017, 07:45:56 AM
Installed a cup holder.  Getting ready to ride out Wednesday for Fort Myers for 3 days then on to Key West for a few days.  Hope to get it washed today before the trip.
Title: Re: What did you do to or on your CVO today?
Post by: RoadTrip on January 24, 2017, 09:25:58 PM
I’ve always used the same USB drive for updates and have always kept my music on the root dir.  Cleaned the drive, reloaded, and success. 

SPOT on suggestion ….

Thanks a million . . . frustration over . .  .

I love it when a plan comes together! Let's hope your beta test rides go well!
Title: Re: What did you do to or on your CVO today?
Post by: KGB on January 25, 2017, 12:29:36 PM
Wax it!  ::)
Title: Re: What did you do to or on your CVO today?
Post by: VANAMAL on January 26, 2017, 10:02:34 AM
I changed the fuel filter on the 2012 bike. It dawned on me that it was never done. Ive done the 2005 bike several times
Title: Re: What did you do to or on your CVO today?
Post by: Eazily9 on January 26, 2017, 09:35:35 PM
Got my tour pak in today!! Can't wait to get it out on!!(https://uploads.tapatalk-cdn.com/20170127/161dea877f305c7a39c205a9f3a3c3aa.jpg)(https://uploads.tapatalk-cdn.com/20170127/fceeec922740b7cd3b3c190ab9162b19.jpg)(https://uploads.tapatalk-cdn.com/20170127/acf95bb26572da3cb6952a24ca9ca8d6.jpg)


Sent from my iPad using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Eazily9 on January 26, 2017, 09:38:10 PM
Got my tour pak in today!! Can't wait to get it out on!!(https://uploads.tapatalk-cdn.com/20170127/161dea877f305c7a39c205a9f3a3c3aa.jpg)(https://uploads.tapatalk-cdn.com/20170127/fceeec922740b7cd3b3c190ab9162b19.jpg)(https://uploads.tapatalk-cdn.com/20170127/acf95bb26572da3cb6952a24ca9ca8d6.jpg)


Sent from my iPad using Tapatalk
It will be put on this...(https://uploads.tapatalk-cdn.com/20170127/5afba49b32086df74a075fd9fff65440.jpg)


Sent from my iPad using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: KGB on January 26, 2017, 09:55:02 PM
It will be put on this...(https://uploads.tapatalk-cdn.com/20170127/5afba49b32086df74a075fd9fff65440.jpg)


Sent from my iPad using Tapatalk

Very nice!
Title: Re: What did you do to or on your CVO today?
Post by: Indenial on January 28, 2017, 04:58:18 PM
That time of year again in Minnesota for tear down, clean and Glare-----------
Title: Re: What did you do to or on your CVO today?
Post by: KGB on January 28, 2017, 06:34:34 PM
Same in Ohio!


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: JCZ on January 28, 2017, 07:11:23 PM
Went for a ride around San Diego.....then putt on over to Fiesta Island.  72F here in San Diego so nice to be able to ride in a t-shirt again.
Title: Re: What did you do to or on your CVO today?
Post by: Jock on January 28, 2017, 07:32:25 PM
Went for a ride around San Diego.....then putt on over to Fiesta Island.  72F here in San Diego so nice to be able to ride in a t-shirt again.

 ;)  ;)  :D  :D

(http://s2.quickmeme.com/img/1a/1af3308ba37e5f57b9f73a71e522ee942522a7fcd7be43c3dc24c9e09d31b401.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: Eazily9 on January 28, 2017, 10:29:50 PM
Very nice!
Thanks man!!


Sent from my iPad using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: davidwruth on January 29, 2017, 08:36:59 AM
Took it for a ride yesterday morning with snow flurries and last night to test the heated seats. 36 was a little chilly.
Title: Re: What did you do to or on your CVO today?
Post by: a_oroz on January 29, 2017, 12:21:57 PM
(https://uploads.tapatalk-cdn.com/20170129/5d480d2d638f80df31044aa1280743cf.jpg)


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: davidwruth on January 29, 2017, 01:14:05 PM
Admired my LED work
Title: Re: What did you do to or on your CVO today?
Post by: davidwruth on January 29, 2017, 01:16:06 PM
Other side
Title: Re: What did you do to or on your CVO today?
Post by: davidwruth on January 29, 2017, 01:16:39 PM
Back
Title: Re: What did you do to or on your CVO today?
Post by: grandpadoc on January 29, 2017, 09:13:46 PM
Rode my RG to the snow.
Title: Re: What did you do to or on your CVO today?
Post by: Flatvalley on January 30, 2017, 01:34:34 PM
Rode the bike to the local Harley Dealership where they installed new tires, then rode it home. First time I ever rode any kind of bike in January in Fargo, North Dakota.  Refreshing to be sure, but smiled both ways. 
Title: Re: What did you do to or on your CVO today?
Post by: RGlideKid on January 30, 2017, 06:32:14 PM
I got on mine as well, and put around 70 miles on her.  First ride of the new year, and the first ride since October.  It's been very windy, damp, and cold here for a long time.  It was nice to get out again.
Title: Re: What did you do to or on your CVO today?
Post by: WVHoop on January 30, 2017, 08:04:53 PM
Installed a new Baker compensator & new chrome inner primary.
Title: Re: What did you do to or on your CVO today?
Post by: WVHoop on January 30, 2017, 08:07:54 PM
Finished!!
Title: Re: What did you do to or on your CVO today?
Post by: wtfdskin on January 30, 2017, 09:11:11 PM
Swapped out my stock head pipe for a decatted one.
Title: Re: What did you do to or on your CVO today?
Post by: Indenial on January 31, 2017, 09:32:54 AM
Hoop, that sure is a lot of chrome. Like it
Title: Re: What did you do to or on your CVO today?
Post by: Jock on February 01, 2017, 06:53:35 PM
Had camshaft lifters, cam bearings and cam replaced...failure at 32k miles...All Better!

 :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: OBB on February 01, 2017, 08:13:56 PM
Had camshaft lifters, cam bearings and cam replaced...failure at 32k miles...All Better!

 :2vrolijk_21:
Hope you caught it before anything went further into the engine.
Title: Re: What did you do to or on your CVO today?
Post by: Jock on February 01, 2017, 08:22:55 PM
Hope you caught it before anything went further into the engine.

I hear ya...

 :'(
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on February 01, 2017, 09:25:38 PM
Well poop! There went the theory that the 2014 up lifters hold up a lot better.....
Title: Re: What did you do to or on your CVO today?
Post by: BlueLimited2016 on February 02, 2017, 12:53:12 PM
This time of year I can't do much with it besides detail it and learn how to operate the infotainment system...LOL
Title: Re: What did you do to or on your CVO today?
Post by: RGlideKid on February 02, 2017, 11:29:18 PM
Re-did my 64GB SD card with all my MP3's on it.  Got rid of all the stuff you can't hear at 55 (or don't want to hear at a stoplight!), and added a bunch of more Harley-appropriate tunes.  Looking forward to spring!
Title: Re: What did you do to or on your CVO today?
Post by: Dan_Lockwood on February 03, 2017, 08:40:23 AM
Re-did my 64GB SD card with all my MP3's on it.  Got rid of all the stuff you can't hear at 55 (or don't want to hear at a stoplight!), and added a bunch of more Harley-appropriate tunes.  Looking forward to spring!

Do ya need more tunes there buddy?
Title: Re: What did you do to or on your CVO today?
Post by: RGlideKid on February 03, 2017, 11:09:57 AM
I can ALWAYS use more tunes, old friend!  I'm still working on getting my Saturday mailman to cough his MP3's up.  Haven't seen him in a long time.  Must've switched routes or he gave it up to be home on the weekends.
I have a few new ones for you as well.  We'll get together at ES!
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on February 04, 2017, 07:13:19 AM
Well poop! There went the theory that the 2014 up lifters hold up a lot better.....
They don't hold up better in the 2015's either.  Counting mine, I know 3 2015's that had lifter failure that required motor replacement.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on February 04, 2017, 07:16:28 AM
Rode my 2017 CVO Street glide over to SMHD for the 10,000 service after 4 months of ownership.  They had a new speedometer on order for it due to something on the glass, on the inside.  Other than that no issues on it so far.

Today plan to ride down to GA to get lunch at a Cajun joint.  Looks to be in the 20's when I head out with a high of 45.
Title: Re: What did you do to or on your CVO today?
Post by: KGB on February 04, 2017, 07:46:41 AM
Rode my 2017 CVO Street glide over to SMHD for the 10,000 service after 4 months of ownership.  They had a new speedometer on order for it due to something on the glass, on the inside.  Other than that no issues on it so far.

Today plan to ride down to GA to get lunch at a Cajun joint.  Looks to be in the 20's when I head out with a high of 45.
I have the same problem with my 2016 SESG, it looks like a dried liquid of some sort, will have to take it in after it warms up in a month or two
Title: Re: What did you do to or on your CVO today?
Post by: CVO Limited on February 04, 2017, 08:33:36 AM
I can ALWAYS use more tunes, old friend!  I'm still working on getting my Saturday mailman to cough his MP3's up.  Haven't seen him in a long time.  Must've switched routes or he gave it up to be home on the weekends.
I have a few new ones for you as well.  We'll get together at ES!

I agree! It always seems that I don't have the time or I'm not in the mode to set up a good play list. Sent you a PM.
Title: Re: What did you do to or on your CVO today?
Post by: Cecild211 on February 04, 2017, 09:25:22 AM
Added a little Focal upgrade


(https://uploads.tapatalk-cdn.com/20170204/7e405734067cc218dd4716f2c7b8e92f.jpg)




Sent from my iPad using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: TheGullGuy on February 04, 2017, 09:38:30 AM
This time of year I can't do much with it besides detail it and learn how to operate the infotainment system...LOL

Get yourself a sled and head on up to Pittsburg . . .
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on February 04, 2017, 05:31:35 PM
Get yourself a sled and head on up to Pittsburg . . .

Or move a bit south like we did..... Having a storage season sucks
Title: Re: What did you do to or on your CVO today?
Post by: CVO Limited on February 04, 2017, 06:55:30 PM
Put the CVO's title in the safe that arrived in the mail today. Paid in full!!
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on February 05, 2017, 08:04:26 AM
We did a nice 284 mile lunch ride yesterday, 7 bikes, 3 CVO's.  It was 23 when we started and the high was 49.  Great ride though the East TN and North GA hills and curves.
Title: Re: What did you do to or on your CVO today?
Post by: Mr. Warlock on February 05, 2017, 08:56:09 AM
Put the CVO's title in the safe that arrived in the mail today. Paid in full!!

 :2vrolijk_21: :2vrolijk_21: :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on February 05, 2017, 09:56:21 AM
:2vrolijk_21: :2vrolijk_21: :2vrolijk_21:
Congrats!
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on February 06, 2017, 09:20:12 AM
Added a little Focal upgrade
(https://uploads.tapatalk-cdn.com/20170204/7e405734067cc218dd4716f2c7b8e92f.jpg)
Sent from my iPad using Tapatalk

Hey Cecil, is that all you did?  Did you replace the faring as well as the tour pac speakers with Focal?  How much of an improvement vs. the stock stage II Boom?  I'm guessing much better.

Warranty runs out end of July this year and I plan to start doing some different things...speakers were on that list.

Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on February 06, 2017, 09:22:07 AM
Put the CVO's title in the safe that arrived in the mail today. Paid in full!!

That is a very good milestone!  Congratulations.  42 more payments and Beauregard is mine, too (or sooner if I hit the Lottery)..... :huepfenlol2: :drink: ;D :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Cecild211 on February 06, 2017, 11:24:33 PM
Hey Cecil, is that all you did?  Did you replace the faring as well as the tour pac speakers with Focal?  How much of an improvement vs. the stock stage II Boom?  I'm guessing much better.

Warranty runs out end of July this year and I plan to start doing some different things...speakers were on that list.


I found that at highway speeds I could not here it very well with stock speakers.  Base tends to get blown away with speed.  The focals have a bit more highs that made it much better at speed. 

Only mod I made was to the boxes.  Had to cut out just a bit for the magnet. 

I left the rears boom speakers for now. Good base in rear and better tweets up front. 

A big improvement going down the road. 

I have focals and arc audio amp on my 11 RG.  it will push a lot more volume and is very very clear.  May go that route someday on this one but for now this made the difference I was looking for and it's pretty impressive



Sent from my iPad using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Cecild211 on February 06, 2017, 11:25:51 PM
Hey Cecil, is that all you did?  Did you replace the faring as well as the tour pac speakers with Focal?  How much of an improvement vs. the stock stage II Boom?  I'm guessing much better.

Warranty runs out end of July this year and I plan to start doing some different things...speakers were on that list.


I did a 400 mile trek Saturday and it was sounding great


Sent from my iPad using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on February 07, 2017, 07:14:11 AM
I found that at highway speeds I could not here it very well with stock speakers.  Base tends to get blown away with speed.  The focals have a bit more highs that made it much better at speed. 
Only mod I made was to the boxes.  Had to cut out just a bit for the magnet
I left the rears boom speakers for now. Good base in rear and better tweets up front. 
A big improvement going down the road
I have focals and arc audio amp on my 11 RG.  it will push a lot more volume and is very very clear.  May go that route someday on this one but for now this made the difference I was looking for and it's pretty impressive

Mod the boxes.  You didn't happen to take any pictures, did you?

Glad it was a big improvement and you are happy with the change. 

Title: Re: What did you do to or on your CVO today?
Post by: el Cadar on February 07, 2017, 09:32:02 AM
Since buying mine last month (it was an auction bike ?repo?), I have reordered the TourPak (still waiting on parts to arrive), installed the chrome boot/exhaust protector, and installed the garage door receive in the overhead of the garage and programmed it with the hi/lo beams...Snow and ice preventing much more than that. 
Title: Re: What did you do to or on your CVO today?
Post by: Cecild211 on February 07, 2017, 06:18:00 PM
Mod the boxes.  You didn't happen to take any pictures, did you?

Glad it was a big improvement and you are happy with the change.


No I sure didn't.  I thought last night I should have and posted it.  I can tell you I cut a slot just above the foam pad about an 1" x 2.5".  Then covered it with gorilla tape.   The magnets don't protrude much. 


Sent from my iPad using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: RGlideKid on February 07, 2017, 09:02:11 PM
Made a dinner run with the wife and tested out a new .gpx file on the BoomBox.  This route was devised using the myrouteapp (formerly Tyre) free on-line mapping program. 
I was beginning to thing that getting the BB to regurgitate a map verbatim just like we wrote it (using whichever software we used), would never come to pass.

But now I think I may have actually figured out a key secret to forcing the BB to behave and give us back the route we originally created.
And let's face it...since HD is useless in helping us, we're going to have to figure this out for ourselves. 
I want to do more research and be more confident I've found a solution, but I will share the results when I feel better about my findings.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on February 07, 2017, 09:15:17 PM
Made a dinner run with the wife and tested out a new .gpx file on the BoomBox.  This route was devised using the myrouteapp (formerly Tyre) free on-line mapping program. 
I was beginning to thing that getting the BB to regurgitate a map verbatim just like we wrote it (using whichever software we used), would never come to pass.

But now I think I may have actually figured out a key secret to forcing the BB to behave and give us back the route we originally created.
And let's face it...since HD is useless in helping us, we're going to have to figure this out for ourselves. 
I want to do more research and be more confident I've found a solution, but I will share the results when I feel better about my findings.
I just updated mine after reading this. Still shows the same name but I'm using a PC, not a tablet or phone. They name didn't change though.  :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: RGlideKid on February 07, 2017, 09:19:34 PM
I just updated mine after reading this. Still shows the same name but I'm using a PC, not a tablet or phone. They name didn't change though.  :nixweiss:

Mike,
Had a few beers, so I'm denser than normal...but I didn't follow your statement.  Help an old fart out, would you?
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on February 08, 2017, 07:37:08 AM
Put new tags on the 2003 Fatboy, 13 CVO King and 17 CVO Street Glide.  This is the only time I do not like the Yaffe Stealth III plate frame as you must remove it from the bike, take it a part, put decal on, the reassemble and install.  Its a pain.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on February 11, 2017, 01:51:55 PM
Mike,
Had a few beers, so I'm denser than normal...but I didn't follow your statement.  Help an old fart out, would you?
just saw this Harry. I was talking about the name of the Tyre program. I saw the link to the app after I has posted this. I thought the name of the program Tyre, had changed.
Title: Re: What did you do to or on your CVO today?
Post by: davidwruth on February 11, 2017, 07:21:36 PM
Installed new LRS windshield and put about 100 miles on today. Did t have a lot of time to ride. Only home for the weekend and needed to do honey do list as well. At least got my February ride in.
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on February 11, 2017, 09:20:30 PM
Mocked up some new bits for the Road King.  Even more things that if someone looks close will see it's not like any other and if they don't know or don't look close will think it just looks cool.  Then had a nice little ride with friends to dinner then after that an almost equally nice ride in to the rising full moon on a 68 degree February night.  In another words a damn near perfect day with the bike.
Title: Re: What did you do to or on your CVO today?
Post by: cmashark on February 12, 2017, 01:13:13 AM
Installed a Mustang seat, a 10 inch wind splitter, and ordered a 117 stage 3 kit.
Title: Re: What did you do to or on your CVO today?
Post by: CVO114 on February 12, 2017, 08:47:58 PM
Added vance & hines power duals header, Titan slip ons, backrest and a tune. Sorry for the mess in the background to many projects going on lol
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on February 12, 2017, 11:13:42 PM
went 400 miles for a pastrami sandwich. Sandwich sucked, ride was awesome!
Title: Re: What did you do to or on your CVO today?
Post by: Mr D on February 13, 2017, 12:44:29 AM
went 400 miles for a pastrami sandwich. Sandwich sucked, ride was awesome!

Been on a few of those myself Alan  8)
Title: Re: What did you do to or on your CVO today?
Post by: Mr D on February 13, 2017, 12:46:42 AM
Added vance & hines power duals header, Titan slip ons, backrest and a tune. Sorry for the mess in the background to many projects going on lol

Nice look

PV or TTS ?
Who did your tune ??
Title: Re: What did you do to or on your CVO today?
Post by: CVO114 on February 13, 2017, 06:54:00 AM
Thanks, I went power vision (which I'm pretty impressed by) tune is fuel moto for now atleast. And haven't been able to ride sense doing the work lol
Title: Re: What did you do to or on your CVO today?
Post by: SERK3 on February 13, 2017, 09:30:22 AM
Working 6 days a week since Sept., But decided no matter how tired I was I was going to ride, only got in about 60 miles had to dodge rain showers but very well worth it. :orange: ;D
Title: Re: What did you do to or on your CVO today?
Post by: martys on February 13, 2017, 10:58:36 AM
Went out into the garage and looked at it  :-X AGAIN  :nixweiss:  :drink: Can't wait for spring  :2vrolijk_21:


Marty
Title: Re: What did you do to or on your CVO today?
Post by: KGB on February 13, 2017, 05:07:39 PM
I did nothing to the bike, in West Palm Beach working on my tan until the weather gets better at home so I can get the bike out and ride!
Title: Re: What did you do to or on your CVO today?
Post by: Win on February 13, 2017, 09:09:06 PM
Changed windshield trim from chrome to black
Title: Re: What did you do to or on your CVO today?
Post by: ZVO on February 16, 2017, 10:02:44 PM
I like it
Title: Re: What did you do to or on your CVO today?
Post by: Eazily9 on February 16, 2017, 11:30:49 PM
Got my Slip Ons in today. Get em on next week and let y'all see/hear it hopefully. (https://uploads.tapatalk-cdn.com/20170217/82e1abae822c449da8338a2a86671e76.jpg)(https://uploads.tapatalk-cdn.com/20170217/db123d1a7a76dfd926a6b324de67dc09.jpg)


Sent from my iPad using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: ptnlinda on February 17, 2017, 04:53:59 AM
Looking good. What brand/model are those?
Title: Re: What did you do to or on your CVO today?
Post by: Reject1970 on February 18, 2017, 10:19:17 PM
Installed a new Screaming Eagle Heavy Breather (mod air filter). New Airflow timing cover and derby cover.
Title: Re: What did you do to or on your CVO today?
Post by: longlast on February 19, 2017, 12:27:05 AM
Nice sunny country day so went for a nice country ride
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on February 19, 2017, 07:34:31 PM
Relocate the bike to a storage unit. Sold the house in St. Louis in prep for the move to SW FL.
Title: Re: What did you do to or on your CVO today?
Post by: Billy on February 19, 2017, 08:32:51 PM
Road to Galena and back home 260 miles on Feb 20th Hard to believe. 60 degrees all day long. Billy
Title: Re: What did you do to or on your CVO today?
Post by: Eazily9 on February 19, 2017, 08:55:09 PM
Looking good. What brand/model are those?
Thanks man!! Cobra Neighbor Haters. Looking forward to getting them on this...(https://uploads.tapatalk-cdn.com/20170220/1e4bc7eab7cf9674a92f3a78f602e7f8.jpg)


Sent from my iPad using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: daminal on February 19, 2017, 09:38:14 PM
Finished up my front and rear air ride.  :carrot:
Title: Re: What did you do to or on your CVO today?
Post by: Eazily9 on February 19, 2017, 10:06:32 PM
Changed windshield trim from chrome to black
That looks great man. I was thinking about replacing the chrome ring around the headlight with a black one.


Sent from my iPad using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: ZVO on February 19, 2017, 11:32:21 PM
Went for a ride got some in-n-out came back home
Title: Re: What did you do to or on your CVO today?
Post by: ImBroke on February 20, 2017, 05:45:06 AM
Installed a new Screaming Eagle Heavy Breather (mod air filter). New Airflow timing cover and derby cover.

Sweet!  I wondered if that could be done.  Can you please give a breakdown of what it included?
Title: What did you do to or on your CVO today?
Post by: MrSurly on February 20, 2017, 12:17:49 PM
Installed a chrome inner primary case, performed an oil change, gave her a good bath and rode.. So far, a thousand miles in 2017
(https://uploads.tapatalk-cdn.com/20170220/626ad3e42a89234f3ac2d75fc7e964c9.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: longlast on February 20, 2017, 05:42:04 PM
Hopefully stopped an air leak on the air shocks. Find out tomorrow
Title: Re: What did you do to or on your CVO today?
Post by: Eazily9 on February 20, 2017, 11:37:27 PM
Got my slip Ons installed and I'm very pleased. 2 videos for sound. Hope they work

https://youtu.be/5Y5T6Us-Hkk

https://youtu.be/zNveAvS2eCU


Sent from my iPad using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Win on February 21, 2017, 02:42:59 AM
That sounds awesome! And yes do the trim ring around the headlamp black. I just haven't decided on the visor style or just the black replacement.
I'll be going with two brothers exhaust in black. Since I'm up in Canada I still have at least another month or two to do some changes and finally ride.
Title: Re: What did you do to or on your CVO today?
Post by: CVO114 on February 21, 2017, 09:55:34 PM
Added new floorboards couldn't handle the rubber isolation floppy ones. Plus it gained almost an in drop. and build a toe only shifter and and spaced the left board out to match the right with the vanc&hines spacer.
Title: Re: What did you do to or on your CVO today?
Post by: CVO114 on February 21, 2017, 10:00:13 PM
Shifter heel side is an in longer than stock toe
Title: Re: What did you do to or on your CVO today?
Post by: pit1600 on February 22, 2017, 10:29:29 AM
Installed a new Screaming Eagle Heavy Breather (mod air filter). New Airflow timing cover and derby cover.

very nice. Which filter did you use? I'm wondering of adding music on mine with fairing lowers...
Title: Re: What did you do to or on your CVO today?
Post by: KGB on February 23, 2017, 08:16:38 AM
Updated Boom Box Audio software to 1.20.3 and also updated Dealer Location to 2016 Q4
Title: Re: What did you do to or on your CVO today?
Post by: Eazily9 on February 24, 2017, 10:57:43 PM
Great ride with some other SE's tonight. Nothing like riding with some good friends.

(https://uploads.tapatalk-cdn.com/20170225/51d94fb1a5a30d20f2efb273927a318f.jpg)


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Jaxcvo on March 01, 2017, 04:03:57 PM
Installed fp3, highrollers, and cobra headpipes
Title: Re: What did you do to or on your CVO today?
Post by: Jaxcvo on March 01, 2017, 04:04:30 PM
.
Title: Re: What did you do to or on your CVO today?
Post by: Jaxcvo on March 01, 2017, 04:04:55 PM
.
Title: Re: What did you do to or on your CVO today?
Post by: Jaxcvo on March 01, 2017, 04:05:22 PM
.
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on March 01, 2017, 06:27:00 PM
Slipstream heated grips!!!!! Love em. . I hated the stock grips that came on the bike since day one.   :huepfenjump3:
Title: Re: What did you do to or on your CVO today?
Post by: OBB on March 01, 2017, 10:01:57 PM
Slipstream heated grips!!!!! Love em. . I hated the stock grips that came on the bike since day one.   :huepfenjump3:
I like those. May have to have mine warrantied out for them. Nice selection.
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on March 01, 2017, 10:04:13 PM
I just bought the grips.  Warranty would only replace the junk I took off. . Oh well.  Can't take it with me.  ;)
Title: Re: What did you do to or on your CVO today?
Post by: Mr D on March 01, 2017, 11:16:51 PM
I just bought the grips.  Warranty would only replace the junk I took off. . Oh well.  Can't take it with me.  ;)

Have a P/N for those ?
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on March 01, 2017, 11:31:47 PM
56100069. LH grip
56100020. RH grip

These are from 2014cvo limited. . Not sold in a kit hanging on the wall. . Gotta get these parts or it won't work. . Stuart
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on March 01, 2017, 11:36:41 PM
I guess thats why God makes chocolate and vanilla, I had the Slipstream on my Roadglide which were perfectly fine and swapped them out with the new style grips and I love the way they feel. Both were heated so wasn't a cheap swap..
Title: Re: What did you do to or on your CVO today?
Post by: Mr D on March 02, 2017, 09:18:47 PM
56100069. LH grip
56100024. RH grip

These are from 2014cvo limited. . Not sold in a kit hanging on the wall. . Gotta get these parts or it won't work. . Stuart

Thanks, Stu
Title: Re: What did you do to or on your CVO today?
Post by: Mr D on March 02, 2017, 09:24:05 PM
56100069. LH grip
56100024. RH grip

These are from 2014cvo limited. . Not sold in a kit hanging on the wall. . Gotta get these parts or it won't work. . Stuart

Stu,

RH grip is coming up at $11
Correct PN ?
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on March 02, 2017, 09:48:28 PM
I'm sorry.  I'll correct that. . . Please check again. That was a cap that you don't need to buy. Stuart
Title: Re: What did you do to or on your CVO today?
Post by: skratch on March 02, 2017, 09:51:52 PM
56100069. LH grip
56100020. RH grip

These are from 2014cvo limited. . Not sold in a kit hanging on the wall. . Gotta get these parts or it won't work. . Stuart

got different numbers from the parts manuals.  damn, them some expensive grips...... over $450
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on March 02, 2017, 09:57:27 PM
They were very expensive. . Couldn't believe it but I wanted those.  And heated.  The kit that is listed in the parts catalog won't work. . .  So this is the way. If you want these. Stuart
Title: Re: What did you do to or on your CVO today?
Post by: Grizzly on March 02, 2017, 11:21:31 PM
Just wondering why you wouldn't go with http://heatdemon.com/products/motorcycle-grip-heater-kit-for-harley-with-four-level-controller
and then use any style grip you wish?

 :nixweiss:

I installed them on my wife's Ultra and they work way better than my stock CVO grips... Their controller is easier to operate and they heat up faster and stay warmer.

Once I'm out of warranty next year, if mine break for a 4th time, I'll be going with Heat Demons for sure.

Oh yeah, Heat Demons are less expensive as well!  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on March 05, 2017, 04:09:59 PM
(https://uploads.tapatalk-cdn.com/20170305/7ac42ea8ff7dafbb9ddbae4f9d188582.jpg)
(https://uploads.tapatalk-cdn.com/20170305/ae339b888996f42b6dc14b90b8c14dfd.jpg)
Installed the 117 engine tags and derby cover.
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on March 05, 2017, 06:39:47 PM
No reason really. I just wanted harley stuff.  I live in FL. . Hardly ever use them too.  Just one of those things. . . Stuart
Title: Re: What did you do to or on your CVO today?
Post by: DesertHOG on March 05, 2017, 07:49:47 PM
(https://uploads.tapatalk-cdn.com/20170305/7ac42ea8ff7dafbb9ddbae4f9d188582.jpg)
(https://uploads.tapatalk-cdn.com/20170305/ae339b888996f42b6dc14b90b8c14dfd.jpg)
Installed the 117 engine tags and derby cover.

Just the tags and derby or did you get the kit upgrade installed?
If you have 117 what is your experience so far?
Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on March 05, 2017, 08:11:14 PM


Just the tags and derby or did you get the kit upgrade installed?
If you have 117 what is your experience so far?

I didn't go with the kit. I purchased just the cylinders. I used the CP 11.4 compression pistons, heads by HD Street Performance, HPI 55mm throttle body, 5.3 injectors, Woods TW9B-6 cams, Jackpot 2-1-2 headpipe and 4" Rinehart mufflers.

It's been running great. I have about 9,000 miles on the 117 now with no problems. Great power and torque.

Title: What did you do to or on your CVO today?
Post by: MrSurly on March 06, 2017, 10:11:27 AM
I spent a rainy, lazy Sunday replacing an annoyingly sketchy power socket. The power outlet in the Tourpak has (for years) been stupid unreliable. I don't use it often and when I do, I'm reminded that whatever you plug into it will randomly have or not have power. I would plug in my phone to charge while I rode and it would be charging when I started and charging when I stopped, but it didn't charge while riding(!). Wiggle the plug and it would blink. One of those annoying things that was never important enough to chase. Well, I finally got around to it. Took it apart to learn the cause, (surprised by shoddy build) replaced it with a better unit, included USB ports, LED indicator and wired it 'hot' all the time.
This is the factory installed power outlet in the Tourpak and it is a really crap design. After seeing it apart, I would strongly advise AGAINST just replacing with a new one of the same (Harley) source. I'm actually surprised that these aren't causing fires. Anyway, found a better-built piece at WalMart which included USBs. I made a little bracket and it worked out pretty slick. While in there, I installed the Anderson Tourpak bracket. It passed the rainy day perfectly.
(https://uploads.tapatalk-cdn.com/20170306/831cbbf23044d5a9a907da28fac2edda.jpg)
(https://uploads.tapatalk-cdn.com/20170306/8bfb5f2a0c5893b29f455b69a686d3c0.jpg)
(https://uploads.tapatalk-cdn.com/20170306/2436e988fb1e5d57c02e8790008ed9e7.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on March 07, 2017, 06:25:36 AM
(https://uploads.tapatalk-cdn.com/20170305/7ac42ea8ff7dafbb9ddbae4f9d188582.jpg)
(https://uploads.tapatalk-cdn.com/20170305/ae339b888996f42b6dc14b90b8c14dfd.jpg)
Installed the 117 engine tags and derby cover.

Looks great Joe.
Title: Re: What did you do to or on your CVO today?
Post by: manllyy on March 07, 2017, 08:05:01 AM
(https://uploads.tapatalk-cdn.com/20170305/7ac42ea8ff7dafbb9ddbae4f9d188582.jpg)
(https://uploads.tapatalk-cdn.com/20170305/ae339b888996f42b6dc14b90b8c14dfd.jpg)
Installed the 117 engine tags and derby cover.

Hello Joe
How much total they cost for hookup that kit on your bike ?


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on March 07, 2017, 08:11:48 AM
Hello Joe
How much total they cost for hookup that kit on your bike ?


Sent from my iPhone using Tapatalk
Derby cover is from Custom Engraving Ltd  (195 + shipping). Engine tags are from Legacy Baggers  (35 + shipping).
Title: Re: What did you do to or on your CVO today?
Post by: PatrickP on March 07, 2017, 08:58:50 AM
Great ride with some other SE's tonight. Nothing like riding with some good friends.

(https://uploads.tapatalk-cdn.com/20170225/51d94fb1a5a30d20f2efb273927a318f.jpg)


Sent from my iPhone using Tapatalk
Those look Awesome!! Wish I lived closer!
A lot of $$ sitting there!


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: JoeVibe on March 07, 2017, 11:39:18 AM
(https://uploads.tapatalk-cdn.com/20170305/7ac42ea8ff7dafbb9ddbae4f9d188582.jpg)
(https://uploads.tapatalk-cdn.com/20170305/ae339b888996f42b6dc14b90b8c14dfd.jpg)
Installed the 117 engine tags and derby cover.

Looks great Joe! I ordered the derby and timer covers from them this weekend. I debated between what you bought and the one that's the reverse of yours. I ended up ordering this style. Hopefully it'll look as good as yours does.
Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on March 07, 2017, 01:05:29 PM


Looks great Joe! I ordered the derby and timer covers from them this weekend. I debated between what you bought and the one that's the reverse of yours. I ended up ordering this style. Hopefully it'll look as good as yours does.

I had to make that decision as well. I think they both look good. I opted to go with the one that closely matched the original 110 cover. I'm sure you'll be pleased with your choice.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on March 08, 2017, 06:04:06 AM
Looks great Joe! I ordered the derby and timer covers from them this weekend. I debated between what you bought and the one that's the reverse of yours. I ended up ordering this style. Hopefully it'll look as good as yours does.
With the black motor in your bike, I do not think you can go wrong with either choice.  I'm running a black cover on my King.

Title: Re: What did you do to or on your CVO today?
Post by: michaelokielee@yahoo.com on March 08, 2017, 09:20:33 AM
That looks so Kewl!!! Thanks for your Service Chief :orange:
Title: Re: What did you do to or on your CVO today?
Post by: AMEDD_SFC on March 08, 2017, 02:38:06 PM
Finished the TP detach and solo seat mod.  Thanks to FLSTFIDAVE for his great tutorial.  It saved me a lot of time and mistakes.

LA Choppers 10" Twin Peaks
Laydown License plate (not pictured)
HD Tour Pack Quick Detach kit
Heated Solo Seat from Corbin
Kuryakin Skythe mirrors

Cheers!

Mark
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on March 09, 2017, 07:35:58 AM
Finished the TP detach and solo seat mod.  Thanks to FLSTFIDAVE for his great tutorial.  It saved me a lot of time and mistakes.

Cheers!

Mark

You are welcome.  Looks good.

Well I had to replace the battery in the 13 CVO King.  It was the original and bike is always on a tender.  Got done with that, removed the stock shocks and installed Ohlin HD-159 shocks, an inch taller.  Then I took her out for a 200 mile ride.  Rides much better, need to do the front end with Ohlin......
Title: Re: What did you do to or on your CVO today?
Post by: KGB on March 09, 2017, 12:46:29 PM
You are welcome.  Looks good.

Well I had to replace the battery in the 13 CVO King.  It was the original and bike is always on a tender.  Got done with that, removed the stock shocks and installed Ohlin HD-159 shocks, an inch taller.  Then I took her out for a 200 mile ride.  Rides much better, need to do the front end with Ohlin......
My I ask where you purchased the Ohlin's from?


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Eazily9 on March 09, 2017, 02:49:48 PM
Those look Awesome!! Wish I lived closer!
A lot of $$ sitting there!


Sent from my iPhone using Tapatalk
Yeah there's 1 '16 in the bunch. Rear right of the pic. Good times for sure!!


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on March 11, 2017, 08:47:43 AM
My I ask where you purchased the Ohlin's from?


Sent from my iPhone using Tapatalk

From Ohlin, at Destination Daytona during bike week.  The Ohlin reps were there.  I ran them on my 15 CVO Road Glide Ultra.  When I traded it, I took them off, sent them to Ohlin to be rebuilt. 
Title: Re: What did you do to or on your CVO today?
Post by: dennis karsen on March 17, 2017, 10:29:11 PM
Finished up a couple of winter projects.

Installed Paul Yaffe 10 inch Monkey bars and a 2017 fuel tank console on my 2012 CVO Street Glide. The bars went in without any problems, both hydraulic lines and wiring  did not need to be lengthened. Only had to relocate the left handle bar molex connector in the fairing from in front of the speaker to underneath the speaker.
  Thought I would miss the bat wing fairing mirrors but was surprised to find out how much better the mirrors are when mounted on the bars.
  The 2017 insert for the fuel tank console is much darker, almost black as compared with model years 2105 and 2016 which is silver/grey in color.
Title: Re: What did you do to or on your CVO today?
Post by: dennis karsen on March 17, 2017, 10:33:06 PM
another picture
Title: Re: What did you do to or on your CVO today?
Post by: Phreakyz on March 18, 2017, 08:07:13 AM
While in Daytona I had Custom Dynamics install their Lighted windshield trim.
Title: Re: What did you do to or on your CVO today?
Post by: Win on March 18, 2017, 11:22:16 PM
Black heat shields and Two Brothers Racing comp s mufflers
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on March 19, 2017, 12:46:18 AM
While in Daytona.  I visited Pete and the soundz guys. I upgraded all the focals and added the lowers.  Soundz amazing.  Thanks again for the great job and products. Stuart
Title: Re: What did you do to or on your CVO today?
Post by: Lars on March 19, 2017, 11:29:45 AM
Finished up a couple of winter projects.

Installed Paul Yaffe 10 inch Monkey bars and a 2017 fuel tank console on my 2012 CVO Street Glide. The bars went in without any problems, both hydraulic lines and wiring  did not need to be lengthened. Only had to relocate the left handle bar molex connector in the fairing from in front of the speaker to underneath the speaker.
  Thought I would miss the bat wing fairing mirrors but was surprised to find out how much better the mirrors are when mounted on the bars.
  The 2017 insert for the fuel tank console is much darker, almost black as compared with model years 2105 and 2016 which is silver/grey in color.

Dennis,
What is the instrument on the left handlebar that has a gage of some sort on it?
Also, were you able to use the stock hydraulic clutch and break cables and did you have to relocate them?
BTW, really nice looking scoot.
Title: Re: What did you do to or on your CVO today?
Post by: 110tHunDer on March 19, 2017, 05:21:20 PM
Black heat shields and Two Brothers Racing comp s mufflers

Beautiful bike!
Title: Re: What did you do to or on your CVO today?
Post by: FXD_TG on March 19, 2017, 05:45:35 PM
Washed and Zaino'd it (and the other two bikes) for the first time since November.  :o  No sense in cleaning bikes when they just get dirty every time you take them out during the winter.
Title: Re: What did you do to or on your CVO today?
Post by: Road Dad on March 19, 2017, 06:37:36 PM
Rode for a couple of hours in the sun. Not much snow left on the roadsides. I think I saw a balmy 46F today
Title: Re: What did you do to or on your CVO today?
Post by: us1fountain on March 19, 2017, 09:43:55 PM
While in Daytona.  I visited Pete and the soundz guys. I upgraded all the focals and added the lowers.  Soundz amazing.  Thanks again for the great job and products. Stuart

Do you have a side pic of the lower speaker? It clears your overflow bottle no problem?
Title: Re: What did you do to or on your CVO today?
Post by: Supershooter on March 19, 2017, 10:42:13 PM
Picked up a new battery under warranty, believe it or not, on Saturday for the cvo, today I walked pasted it to throw a leg over the the ole Dyna for a quick 20 mile loop, God it feels good to ride again after a long winter!
Supershooter
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on March 19, 2017, 11:08:46 PM
Do you have a side pic of the lower speaker? It clears your overflow bottle no problem?
Here is a pic of my Focals on the lowers. My guy made a adaptor, sound great.
Title: Re: What did you do to or on your CVO today?
Post by: dennis karsen on March 19, 2017, 11:52:16 PM

The gauge on the left bar is my oil temperature gauge, no room for it in the fairing .

           I did not have to remove either hydraulic lines or relocate them, 10 inch Yaffe bars are the limit on the 2012 CVO Street Glides for non removal , any taller and you will need longer hydraulic lines.
Title: Re: What did you do to or on your CVO today?
Post by: Lars on March 20, 2017, 11:16:27 AM
Thanks for the info.
I think 10" Yaffi's are really closer to 12" rise and 12" Khrome Werks is what I'm going to install on my 2013 SEUC8.
I may get away with not having to replace the clutch and break lines.
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on March 22, 2017, 12:16:56 AM
Side view. . Really surprised how much of a difference these make. . Stuart .
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on March 22, 2017, 12:45:00 AM
Side view. . Really surprised how much of a difference these make. . Stuart .
Looks great Stuart!
Title: Re: What did you do to or on your CVO today?
Post by: wrayzor on March 24, 2017, 06:00:55 PM
Replaced the battery Got 4 years out of in the hot desert Vegas heat so I can't complain.
Title: Re: What did you do to or on your CVO today?
Post by: ptnlinda on March 25, 2017, 06:06:27 AM
Finally got everything together and installed some KST 12" Bars, Detachable Kit so I could remove the Top Box and a Mustang Single Seat. Very Happy with look and result. Will do 2 other posts with more Photos.
Title: Re: What did you do to or on your CVO today?
Post by: ptnlinda on March 25, 2017, 06:07:14 AM
More Photo's
Title: Re: What did you do to or on your CVO today?
Post by: ptnlinda on March 25, 2017, 06:07:57 AM
Last of Photos
Title: Re: What did you do to or on your CVO today?
Post by: longlast on March 28, 2017, 05:53:20 PM
Finished up hard wiring in LED's and mounting on to the T/P. Tail, Stop and Turn Signals
Title: Re: What did you do to or on your CVO today?
Post by: michaelokielee@yahoo.com on March 29, 2017, 09:35:37 AM
Added matching Tour Pak brackets, Thanks Joe!! :orange:
Title: Re: What did you do to or on your CVO today?
Post by: acevtwin on March 29, 2017, 10:21:22 AM
Installed the new License Plate frame. Really cleans up the rear fender.
Title: Re: What did you do to or on your CVO today?
Post by: Bacardicokes on March 29, 2017, 05:16:50 PM
Ace who makes that lic plate bracket it looks awesome
Title: Re: What did you do to or on your CVO today?
Post by: FXD_TG on March 29, 2017, 08:28:06 PM
Jaffee Stealth III

(https://ridingtwoup.files.wordpress.com/2014/01/dscn02681.jpg?w=737)

Installed ours back in Jan 2014 after having Joe Z. color-match one to our FLHRSE5
http://wp.me/p1U2kb-xt
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on March 29, 2017, 10:29:25 PM
Jaffee Stealth III

(https://ridingtwoup.files.wordpress.com/2014/01/dscn02681.jpg?w=737)

Installed ours back in Jan 2014 after having Joe Z. color-match one to our FLHRSE5
http://wp.me/p1U2kb-xt
Love it, looks awesome!
Title: Re: What did you do to or on your CVO today?
Post by: Indenial on April 01, 2017, 09:31:29 PM
Went for my first ride of the season. Snow's gone, enough rain to wash away the salt and sand. And sunshine. Wonderful day. :apple:
Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on April 02, 2017, 06:36:43 PM
Put new tires on my 2017 CVO Street Glide.
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on April 02, 2017, 08:50:03 PM
I took the first ride of the year today as well. Felt really good.
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on April 03, 2017, 09:19:52 AM
Nothing this weekend, bike still in storage after we sold our house.
Purchased a battery and hope to install next Sunday after a road trip all week.
Title: Re: What did you do to or on your CVO today?
Post by: havenolife on April 03, 2017, 10:38:46 AM
Put new tires on my 2017 CVO Street Glide.
really how many mile do you have lol
Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on April 03, 2017, 10:50:01 AM
really how many mile do you have lol
13,000 miles. Worst mileage I've ever gotten out of tires. Since the frame and tire upgrade in 2009 on touring models I have always gone 16k to 20k on the rear and 18k to 23k on the front.
Title: Re: What did you do to or on your CVO today?
Post by: jachd17 on April 03, 2017, 06:25:14 PM
13,000 miles. Worst mileage I've ever gotten out of tires. Since the frame and tire upgrade in 2009 on touring models I have always gone 16k to 20k on the rear and 18k to 23k on the front.
Did you go with stock tires or another route?
Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on April 03, 2017, 06:32:07 PM
Did you go with stock tires or another route?
Factory Dunlop tires. Never used anything else.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on April 03, 2017, 07:52:42 PM
13,000 miles. Worst mileage I've ever gotten out of tires. Since the frame and tire upgrade in 2009 on touring models I have always gone 16k to 20k on the rear and 18k to 23k on the front.
Damn batwings!  :huepfenlol2:
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on April 03, 2017, 08:27:51 PM
I ordered a set of Michelin commander 2s today. Was highly recommended so I'm going to give em a try. . Should have them  on by the weekend. . I have 14k on the stock tires. Not too bad.  But I heard these have a great ride. And wear very well.  .  Stuart
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on April 08, 2017, 09:08:10 PM
Got the Michelin commander 2s on yesterday. . Took a big ride today.  I can't believe how well they ride and made the bike handle much better. . No comparison.  Way better than the stock dunlops.  So far I am really happy with these. . Stuart
Title: Re: What did you do to or on your CVO today?
Post by: Eazily9 on April 08, 2017, 11:36:00 PM
Just cleaned her a little. Man I love this color combo. (https://uploads.tapatalk-cdn.com/20170409/3a41b67ce9109d71115785567e34b39e.jpg)


Sent from my iPad using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Trigger-Man on April 09, 2017, 11:06:56 AM
Got the Michelin commander 2s on yesterday. . Took a big ride today.  I can't believe how well they ride and made the bike handle much better. . No comparison.  Way better than the stock dunlops.  So far I am really happy with these. . Stuart
I felt similarly after switching to Dunlop American Elite's. That being said .....most any new tires (even stockers) feel that way at first :P!

Just had Premium Ride Touring Cartridge Front Fork Kit installed to match the Premium Ride rears I'd installed recently. The bike feels more surefooted now :2vrolijk_21:! Glad I opted to have my dealer do the front installation as they had troubles because of an outdated set of instructions which came with the kit :(.
Title: Re: What did you do to or on your CVO today?
Post by: jachd17 on April 09, 2017, 06:50:22 PM
Got it out for a nice ride.....Finally got a decent day here in the northeast. :bananarock:
Title: Re: What did you do to or on your CVO today?
Post by: MIKEYTEE on April 09, 2017, 07:51:37 PM
Took Susie for her 1st bike ride of the year. In fact it might be the first ride in 2 years.  :o
Mike
 :drink:
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on April 09, 2017, 09:31:31 PM
Took the 11.5 out for a ride to the local dealer to meet the official HD demo fleet, the 11.5 wasn't all that impressed, as she's a rather confident machine and probably knew it would be a foolish endeavor to compare her to any of the new '17's   ::)

 We took demo rides on the '17 limited, the CVO Limited, Road Glide Ultra, CVO Street Glide, and one that's always fun to ride, the Tri-Glide. While I was impressed with the 114" in the CVO offerings and the Street Glide is a bit of a hot rod to ride - especially considering the fact that my wife stayed behind and I rode that one solo. Actually the CVO street Glide reminded me a little of my '01 Fatboy in the hot rod department except the Street Glide has a fairing and stereo. The new faring on the Rod glide is very much improved from the last time we rode one back in (I think) 2012, with very little wind buffeting at speed. The newfangled infotainment system would take some getting used to with the strange( to me) joystick controls, it's to dang easy to make an erroneous choice with them things...

 All in all, I still straddled my 11.5 at the end of the demo ride and said "ahhh it's good to be home". Don't misunderstand, the new bikes are quiet(engine noise wise), smooth and have plenty of power, just isn't enough there for me to make a switch.

After the demos the wife and I took the egotistical 11.5 out for a ride to get something to eat and brought it back home to park it in it's rightful place, right next to the Fatboy and Ducati, A good day was had by all indeed.
Title: Re: What did you do to or on your CVO today?
Post by: motor1 on April 11, 2017, 07:10:50 AM
Added adjustable wind deflectors.
Title: Re: What did you do to or on your CVO today?
Post by: motor1 on April 11, 2017, 07:12:05 AM
One more picture
Title: Re: What did you do to or on your CVO today?
Post by: motor1 on April 11, 2017, 07:13:43 AM
Last one.
Title: Re: What did you do to or on your CVO today?
Post by: lcloud on April 11, 2017, 09:06:55 AM
Motor1,  Who makes those deflectors?     
Title: Re: What did you do to or on your CVO today?
Post by: OBB on April 11, 2017, 12:13:50 PM
Motor1,  Who makes those deflectors?   
Kury from what I've read on here.

Sent from my XT1254 using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: Miss Susan on April 11, 2017, 03:34:03 PM
Took Susie for her 1st bike ride of the year. In fact it might be the first ride in 2 years.  :o
Mike
 :drink:

Go Mikey and Susie!   :orange:

Miss Susan
Title: Re: What did you do to or on your CVO today?
Post by: King Glide on April 12, 2017, 07:27:42 PM
I finished installing boom 2 speakers running as boom1, into the fairing lowers....pictures with comments in the radio thread.
Title: Re: What did you do to or on your CVO today?
Post by: longlast on April 13, 2017, 10:27:19 PM
Picked up this little unit the other day it has a built in charger on it with an on off switch built in as well. l hard wired it to the power supply from the two extra 12v supply wires on the headlight harness. It holds my phone and satnav it's of metal construction and black powder coated instead of the usual plastic construction units that are out there.
Title: Re: What did you do to or on your CVO today?
Post by: longlast on April 13, 2017, 10:29:00 PM
Phone
Title: Re: What did you do to or on your CVO today?
Post by: longlast on April 13, 2017, 10:30:54 PM
Satnav
Title: Re: What did you do to or on your CVO today?
Post by: 110tHunDer on April 13, 2017, 10:49:57 PM
Had a few minutes after dinner tonight, so got her out of storage.  Man, that new 500 cca Yuasa battery sure spun it over with some authority!

Let the riding season begin!
Title: Re: What did you do to or on your CVO today?
Post by: VANAMAL on April 13, 2017, 11:33:26 PM
Well since i have two and like to wrench i put the 117" kit in the sesg and had the heads done. New fullsac 2" baffles and a start up tts map courtsey of steve. Also ss plate and pump. Inner bearings  Ck run out .001 crank was done a few years ago. Pretty easywith a lift and nice clean shop and tools. Time to find a tuner or run it over to steve.
While i was oily i took the 05 seeg apart. Its been in a funk with the old pc111. I put in the red shift 575 gear drive cams,inner bearings,ss plate and pump. All new inner and outer ss gears for the gear drive. Ck crank .002 always been a good one never touched the crank 75000 miles.. Twolane helped me find a thundermax tuner and since i had bungs it went right on. Downloaded the base map. Runs smooth no more cut out at cruise
Both bikes have ss premiun lifters,sesg has the perfect fit pushrods,seeg has the se tapered adjustable at 3.5 turns
I think i have a little more respect for the guys that do this full time!
Title: Re: What did you do to or on your CVO today?
Post by: Panhead_Jimmy on April 14, 2017, 04:39:25 PM
Well since i have two and like to wrench i put the 117" kit in the sesg and had the heads done. New fullsac 2" baffles and a start up tts map courtsey of steve. Also ss plate and pump. Inner bearings  Ck run out .001 crank was done a few years ago. Pretty easywith a lift and nice clean shop and tools. Time to find a tuner or run it over to steve.
While i was oily i took the 05 seeg apart. Its been in a funk with the old pc111. I put in the red shift 575 gear drive cams,inner bearings,ss plate and pump. All new inner and outer ss gears for the gear drive. Ck crank .002 always been a good one never touched the crank 75000 miles.. Twolane helped me find a thundermax tuner and since i had bungs it went right on. Downloaded the base map. Runs smooth no more cut out at cruise
Both bikes have ss premiun lifters,sesg has the perfect fit pushrods,seeg has the se tapered adjustable at 3.5 turns
I think i have a little more respect for the guys that do this full time!

Did you install larger rear view mirrors to better scope out the CHP on the 101?  I do understand your need to arrive sooner and do the Van-turnaround in a shorter period of time.  My hero!
Title: Re: What did you do to or on your CVO today?
Post by: dayne66 on April 14, 2017, 06:07:13 PM
Got them insured....gonna be nice and dry on Sunday!
Title: Re: What did you do to or on your CVO today?
Post by: bogosh717 on April 15, 2017, 02:05:01 PM
Put a new rim on my 07 CVO ultra.(https://uploads.tapatalk-cdn.com/20170415/af227e8aa208e8e3623ab53e53cb1b71.jpg)


Sent from my iPad using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: CVO Limited on April 15, 2017, 08:33:37 PM
Put a new rim on my 07 CVO ultra.


Sent from my iPad using Tapatalk

Great looking wheel! What size did you go with?
Title: Re: What did you do to or on your CVO today?
Post by: Lars on April 16, 2017, 11:23:07 AM
Installed 12" Khrome Werks Bobber Apes on my 2013 SEUC8.
Title: Re: What did you do to or on your CVO today?
Post by: dayne66 on April 16, 2017, 03:48:47 PM
Click...click...click......damn......just un-hibernated the bikes and mine clicks even though on the tender all winter! Going to get an AC Delco battery....385 CCA and 30 AH.....

$143.95 CDN

All that's available today...except Canadian Tire with a "Motomaster" sticker on it and made in USA by EastPenn....but ...  400CCA and 26 AH.

Your preference?



Title: Re: What did you do to or on your CVO today?
Post by: 110tHunDer on April 16, 2017, 06:38:24 PM
I've had that happen, too.  Not fun.

Twolanerider posted about this one awhile back.  I mentioned it in my post above.  500 CCA.  :2vrolijk_21:

https://www.amazon.com/gp/aw/d/B00JAXXD2U/ref=yo_ii_img?ie=UTF8&psc=1
Title: Re: What did you do to or on your CVO today?
Post by: tysndys on April 16, 2017, 08:36:21 PM
One of my favorite roads along lake mead.
Title: Re: What did you do to or on your CVO today?
Post by: wrayzor on April 19, 2017, 10:51:36 PM
Had to drop mine off at the stealer for service. The RG has been under the weather and stalling, random RPM spikes at idle and I feel like its surging going down the road. Hope it's an easy/somewhat cheap fix. Just hope its fixed before next weekend's Laughlin River Run.
Title: Re: What did you do to or on your CVO today?
Post by: Drake on April 20, 2017, 09:14:49 PM
Made a swingarm bag:
Title: Re: What did you do to or on your CVO today?
Post by: Redd70 on April 20, 2017, 11:02:56 PM
Made a swingarm bag:



I like it. Truly Custom work.     :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: 110tHunDer on April 21, 2017, 01:05:59 AM
Yes.  Very nice! :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: wtfdskin on April 21, 2017, 01:05:14 PM
Switched out my detachable mounts from 2 point to 4 point. Mocked up fitment for my chopped tour pak before it goes out for paint.
Title: Re: What did you do to or on your CVO today?
Post by: FXD_TG on April 21, 2017, 03:31:02 PM
10,000 miles on Blue II, so new fluids (Red Line & Mobil 1) on all three holes before we head down to PCB for Thunder Beach in two weeks.  New Metzler 888's go on tomorrow.

(https://ridingtwoup.files.wordpress.com/2015/10/20151014_173640.jpg?w=640)

(https://ridingtwoup.files.wordpress.com/2015/10/20151014_180244.jpg?w=640)
Title: Re: What did you do to or on your CVO today?
Post by: skratch on April 21, 2017, 05:06:35 PM
I changed out my ac from the heavy breather with compact filter to the ventilator with the black elite cover.  I think it came out pretty good.  I just got tired of the front of the filter being 1/4'' from the magnetic door on the lower.

before:

(http://i167.photobucket.com/albums/u123/skratchster/IMG_0859_zpsjllwmomi.jpg) (http://s167.photobucket.com/user/skratchster/media/IMG_0859_zpsjllwmomi.jpg.html)

after:

(http://i167.photobucket.com/albums/u123/skratchster/IMG_1193_zpsvyddktgs.jpg) (http://s167.photobucket.com/user/skratchster/media/IMG_1193_zpsvyddktgs.jpg.html)

and I did a little minor surgery on my fullsac baffles so that I could install the short slash up/down exhaust tips.  the hole through the tip was not quite big enough for the baffle to pass through so I had to cut it off so that the baffle would end just on the backside of the plate.  I'm pretty happy with it.

(http://i167.photobucket.com/albums/u123/skratchster/IMG_1194_zpszi0hhrpp.jpg) (http://s167.photobucket.com/user/skratchster/media/IMG_1194_zpszi0hhrpp.jpg.html)
Title: Re: What did you do to or on your CVO today?
Post by: wtfdskin on April 22, 2017, 02:43:13 PM
(https://uploads.tapatalk-cdn.com/20170422/395e9e37e65a10c3c74f0e5db997dfbd.jpg)

Chopped tour pak mounted up, off to the shop for paint.
Title: Re: What did you do to or on your CVO today?
Post by: acevtwin on April 24, 2017, 08:41:01 AM
Installed my New Cobra Neighbor Hater slip on mufflers. The M8 Sounds much better now.
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on May 14, 2017, 12:09:32 PM
Replaced the original battery this morning.  Old battery had been struggling a bit, but finally gave out.  Had a battery on hand, since I knew it was just a matter of time.
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on May 14, 2017, 12:16:16 PM
Replaced the original battery this morning.  Old battery had been struggling a bit, but finally gave out.  Had a battery on hand, since I knew it was just a matter of time.

Both of mine got batteries this spring too.  In a way was nice to think that the home brewed Road King had now been around long enough to actually need a regular maintenance item like a battery.  It had begun to struggle a bit so was also time before it made me walk.  It and the Road Glide's battery were both the same age.  Both had been in service three years.  So, crap, two new batteries.  Now all is happy and spinny again.
Title: Re: What did you do to or on your CVO today?
Post by: Enigmatic on May 14, 2017, 06:38:49 PM
Picked mine up from T-Man's Performance Friday. 117" Thumper, can't wait to cut it loose!
Title: Re: What did you do to or on your CVO today?
Post by: bopn57 on May 14, 2017, 06:52:55 PM
Installed a Rekluse clutch,works great love it so far,put 500miles on it this week 2016 CVO
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on May 14, 2017, 10:40:30 PM
Picked mine up from T-Man's Performance Friday. 117" Thumper, can't wait to cut it loose!
interested in the details of your build & numbers 
Title: Re: What did you do to or on your CVO today?
Post by: Enigmatic on May 15, 2017, 06:31:06 AM
interested in the details of your build & numbers

I'll try to post dyno sheet after work, but it has  680-1 cams and Fulsac DX, 2.25 cores. makes big tq early
Title: Re: What did you do to or on your CVO today?
Post by: rubberheels on May 15, 2017, 08:00:49 AM
I just ordered a Yaffy Stealth Curved license plate bracket and a Long Ride 8in. W/Shield from Revzilla. 17 flhxse 100mi.
Title: Re: What did you do to or on your CVO today?
Post by: pvanwagner on May 15, 2017, 10:00:28 AM
Put 2.0" Full Sac cores in both my wife's and my bikes.  Happy with the sound.

I took two videos after doing the wife's bike before I did mine.  These bikes have completely stock engines and exhaust.  The only change is the Full Sac cores on her bike for these videos:

The first one is a longer one that includes the startups:
https://youtu.be/w72lTOdcQt8

The second one is a shorter video with both bikes already running and warmed up:
https://youtu.be/rq5xBJd3GOU

Title: Re: What did you do to or on your CVO today?
Post by: MC16LTD on May 15, 2017, 10:55:02 AM
Rode to work  :) found a small leak from front master cylinder  :( Will be off to dealer for warranty before heading to Myrtle Beach this weekend.
Title: Re: What did you do to or on your CVO today?
Post by: BostonboyDH on May 15, 2017, 04:12:11 PM


  WAX ON,  WAX OFF!!!!
Title: Re: What did you do to or on your CVO today?
Post by: YELLOWBIRD on May 16, 2017, 08:04:21 AM
Couldn't get in touch with any of my bros to take advantage of the perfect weather this week in my neck of the woods.

Had a awesome ride in "Lone Wolf" mode, no tunes on, just me and the perfect rhythm of the motor and enjoying a wonderful spring afternoon into the evening!



 :bananarock: :bananarock: :bananarock:



YB
Title: Re: What did you do to or on your CVO today?
Post by: Enigmatic on May 17, 2017, 06:11:44 AM
I'll try to post dyno sheet after work, but it has  680-1 cams and Fulsac DX, 2.25 cores. makes big tq early
(https://uploads.tapatalk-cdn.com/20170517/d81ae053c6ae0186327e8b63e3011418.jpg)

A little slow (preparing for bikeweek) but hopefully here it is lol. 117" Signature Thumper, Axtel Cylinders 58mm TB Roller Rockers
Title: Re: What did you do to or on your CVO today?
Post by: cmashark on May 21, 2017, 10:30:54 PM
Logged another 246 miles. 
Title: Re: What did you do to or on your CVO today?
Post by: racinghoss on May 22, 2017, 02:38:49 PM
I clicked off about 150 miles (mostly riding to class at the dealership), order a metric ton of parts, and perfected 18' u-turns on it - since it is still basically new to me I needed to practice with it a little bit.  It's different than my old ride.

Ordered:
 - color matched tour pak
 - handlebar switch wiring extensions and new risers for new bars
 - backrest from Bad Boyz MC
 - footboard extenders
 - service manuals
 - heel shifter eliminator
 - windshield bag
Title: Re: What did you do to or on your CVO today?
Post by: Supershooter on May 25, 2017, 10:48:16 PM
Washed bug guts off
Supershooter
Title: Re: What did you do to or on your CVO today?
Post by: waloupis on May 26, 2017, 09:34:50 AM
This is what I did...
Title: Re: What did you do to or on your CVO today?
Post by: RGlideKid on May 29, 2017, 03:32:41 PM
This is what I did...

Clever plate idea!




I finished detailing the Bushtec and the bike.  As far as I can tell, I'm ready for Eureka Springs.  Now to pack for it this coming weekend!   :orange:
Title: Re: What did you do to or on your CVO today?
Post by: jachd17 on May 29, 2017, 07:13:28 PM
This is what I did...
I'll keep my eye out for that plate when I'm in CT. I spend a fair amount of time cruising around Ledyard, Stonington, Mystic and Westerly R.I. area's during the summer....
Title: Re: What did you do to or on your CVO today?
Post by: grandpadoc on May 29, 2017, 08:56:41 PM
Memorial Day at our local cemetery with the Legion Riders.
Title: Re: What did you do to or on your CVO today?
Post by: Enigmatic on May 30, 2017, 04:06:50 PM
This is what I did...

HEY! You can't do that! That's My tag! LOL
Title: Re: What did you do to or on your CVO today?
Post by: waloupis on May 30, 2017, 10:48:01 PM
Hey enigmatic? you really have the same plate?
Title: Re: What did you do to or on your CVO today?
Post by: Enigmatic on May 31, 2017, 06:06:52 AM
Hey enigmatic? you really have the same plate?

Nah, But Close! i have CVOOH bike covered right now so no pic.
Title: Re: What did you do to or on your CVO today?
Post by: KGB on May 31, 2017, 01:49:45 PM
Washed and waxed from OBB's dust from Sunday, ready to go to Pigeon Forge on Friday
(https://uploads.tapatalk-cdn.com/20170531/3cf3208341a07a47bee70b66ad026922.jpg)


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: OBB on May 31, 2017, 03:00:07 PM
Washed and waxed from OBB's dust from Sunday, ready to go to Pigeon Forge on Friday
(https://uploads.tapatalk-cdn.com/20170531/3cf3208341a07a47bee70b66ad026922.jpg)


Sent from my iPhone using Tapatalk
Yeah but I took most of the bugs.  ;D

That TP looks great on there with the small rack. Nice and sleek  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Grizzly on June 01, 2017, 07:32:59 AM
Washed and waxed from OBB's dust from Sunday, ready to go to Pigeon Forge on Friday
(https://uploads.tapatalk-cdn.com/20170531/3cf3208341a07a47bee70b66ad026922.jpg)


Sent from my iPhone using Tapatalk

Black sure is beautiful, especially when it's so clean & waxed.

Great looking ride!   :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Hnhcvo on June 04, 2017, 09:20:44 PM
Installer my custom carbon fiber 4x4 twill back end re set my air ride and road the crap outta my bike for the weekend :)(https://uploads.tapatalk-cdn.com/20170605/f0a8758def9f6b5bd8a604b0c9860e0c.jpg)(https://uploads.tapatalk-cdn.com/20170605/d264d74fc48a9699988d49372baa3132.png)(https://uploads.tapatalk-cdn.com/20170605/74de6936d20945334547fa998628560d.jpg)(https://uploads.tapatalk-cdn.com/20170605/828d16d360b0d5c4737f6c8e2fd5e290.png)(https://uploads.tapatalk-cdn.com/20170605/4969a09f0de9e5336010702b09b3a2cb.jpg)(https://uploads.tapatalk-cdn.com/20170605/c0c9fe269fc432c6347a7bd56bfb4c2b.jpg)(https://uploads.tapatalk-cdn.com/20170605/b3e4ac92de4600cd0edc58ab7396fd79.jpg)


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: bigC on June 04, 2017, 10:18:26 PM
Loaded the bike up and headed out to the 2017 Meet in the Middle!
Title: Re: What did you do to or on your CVO today?
Post by: MC16LTD on June 09, 2017, 09:10:32 PM
Installed a new shiny shift linkage.  Put 1100 miles on the bike last week riding to Myrtle Beach and Daytona.
Title: Re: What did you do to or on your CVO today?
Post by: cmashark on June 10, 2017, 09:11:48 PM
Swapped the stock headpipe and Street cannons for Jackpot headpipe and High Rollers, yesterday. Data logged about 100 miles today with the PV and Target Tune

https://youtu.be/Js8HEtOC2zY

https://youtu.be/W7fQ1B0dEL8

Chris
Title: What did you do to or on your CVO today?
Post by: Hnhcvo on June 11, 2017, 10:10:45 PM
Road a bit with the lady. Found a show , won best custom and people choice. Pretty good Sunday (https://uploads.tapatalk-cdn.com/20170612/d34dfb93377385c50164c026a33b4f12.jpg)


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on June 12, 2017, 11:43:45 AM
Just a couple changes. Removed the muffler plugs, studied on the autotune feature on my FP3 a bit and replaced the red reflectors with clear on both saddlebags...a subtle change but really looks better to me.
Title: Re: What did you do to or on your CVO today?
Post by: RGlideKid on June 12, 2017, 11:52:11 AM
Just a couple changes. Removed the muffler plugs, studied on the autotune feature on my FP3 a bit and replaced the red reflectors with clear on both saddlebags...a subtle change but really looks better to me.

I like the clear reflectors better, Howard!  Where did you find them, at HD or somewhere else?
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on June 12, 2017, 12:43:38 PM
I like the clear reflectors better, Howard!  Where did you find them, at HD or somewhere else?

Harry, where else does one shop these days....Amazon!

Here's the link, sir... :2vrolijk_21:

https://www.amazon.com/gp/product/B01IPSJ3JM/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Title: Re: What did you do to or on your CVO today?
Post by: King Glide on June 12, 2017, 12:52:18 PM
I agree, those look 100 times better to me.
Title: Re: What did you do to or on your CVO today?
Post by: RGlideKid on June 12, 2017, 05:01:41 PM
Harry, where else does one shop these days....Amazon!

Here's the link, sir... :2vrolijk_21:

https://www.amazon.com/gp/product/B01IPSJ3JM/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

You are so right.  I guess Amazon is the new WalMart now, huh?  I spend way too much on Amazon, although I've noticed that they've begun to add state taxes on to my purchases.  Still, I can do a fair amount of research on the product and see if there's some other reputable seller out there who still offers free shipping and no state tax.  Thanks, Howard!
Title: Re: What did you do to or on your CVO today?
Post by: redbeard719 on June 12, 2017, 09:58:16 PM
I removed the stock compensator of my 2010 FLHXSE.  After 42k+ miles, it finally started talking back to me after I had a Fuel Moto 126" Outlaw engine installed last fall.

(http://img.photobucket.com/albums/v322/gtigye79/20170610_111946_zps5jdychuw.jpg) (http://smg.photobucket.com/user/gtigye79/media/20170610_111946_zps5jdychuw.jpg.html)

After that, I ordered new parts:
Title: Re: What did you do to or on your CVO today?
Post by: TNCarters on June 12, 2017, 10:08:10 PM
Had tappets replaced by an Indy just before MIM with S&S and SE adjustable pushrods.  They were making such a racket during the 2000 mile round trip to ES that I decided to redo the pushrod adjustment to the S&S recommended preload.  Much quieter now. I suspect the Indy who was prior HD tech adjusted to 0.10 preload.  Stock lifters looked very good when pulled at 20 k miles.
Title: Re: What did you do to or on your CVO today?
Post by: Bluenuts on June 14, 2017, 04:50:32 PM
One of my favorite roads along lake mead.

Sweet!  I took my wife down Christmas tree pass one year while we were in Vegas!  The south side of the ridge is awesome!!!
Title: Re: What did you do to or on your CVO today?
Post by: Bluenuts on June 17, 2017, 12:21:33 AM
Installed Airflow highway pegs and passenger floorboards this week!
Title: Re: What did you do to or on your CVO today?
Post by: motor1 on June 17, 2017, 10:52:51 PM
Not sure if I like the look yet, but it sure is bright!
Title: Re: What did you do to or on your CVO today?
Post by: motor1 on June 17, 2017, 10:53:38 PM
One more, turn signal on.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on June 18, 2017, 06:31:11 AM
Not sure if I like the look yet, but it sure is bright!
Can you get a good pix of where the wire goes into the fairing? I want to see how well it's hidden.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on June 18, 2017, 08:19:32 AM
Can you get a good pix of where the wire goes into the fairing? I want to see how well it's hidden.
Looks to me like installed the Custom Dynamics bulbs, that are white led in run and turn amber when used as turn signal.  They replace the factory bulbs.  I had them on my 15 SERG.
Title: Re: What did you do to or on your CVO today?
Post by: motor1 on June 18, 2017, 08:41:04 AM
Looks to me like installed the Custom Dynamics bulbs, that are white led in run and turn amber when used as turn signal.  They replace the factory bulbs.  I had them on my 15 SERG.

Yes, those are the plug in 1157 replacements, but I just added Custom Dynamics windshield trim pieces that incorporate LED running and turn signal strips.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on June 18, 2017, 01:06:40 PM
Looks to me like installed the Custom Dynamics bulbs, that are white led in run and turn amber when used as turn signal.  They replace the factory bulbs.  I had them on my 15 SERG.
Talking about the windshield trim lights on this one. I already have the CD lights in the turn signals.
Title: Re: What did you do to or on your CVO today?
Post by: Jock on June 18, 2017, 01:07:41 PM
Wash & Wax.  Ready for next journey!
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on June 18, 2017, 08:04:04 PM
Wash & Wax.  Ready for next journey!

Great minds think alike !!!

I finally got around to cleaning the bike from our MITM trip  :oops: 
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on June 18, 2017, 10:10:17 PM
mine still needs washed....but i got the lawn mowed :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: motor1 on June 19, 2017, 09:20:44 PM
OBB was asking for a picture of the wire feed for windshield LED lights, I figure others may be interested as well.
Title: Re: What did you do to or on your CVO today?
Post by: motor1 on June 19, 2017, 09:21:25 PM
One more
Title: Re: What did you do to or on your CVO today?
Post by: OBB on June 20, 2017, 06:27:05 AM
OBB was asking for a picture of the wire feed for windshield LED lights, I figure others may be interested as well.
TY Sir
Title: Re: What did you do to or on your CVO today?
Post by: TN on June 20, 2017, 06:56:08 AM
Replaced valve guide seals.


 :orange:


TN
Title: Re: What did you do to or on your CVO today?
Post by: kiro on June 20, 2017, 08:32:48 AM
Spent several hours cleaning a multitude of bug hits all over my scoot after the MITM run. Looks good now cleaned up. Ordered a Corbin Dual-tour seat & backrest, which I'll have before Cambo and I ride out to Sturgis.
Title: Re: What did you do to or on your CVO today?
Post by: Jock on June 20, 2017, 08:50:16 AM
Spent several hours cleaning a multitude of bug hits all over my scoot after the MITM run. Looks good now cleaned up. Ordered a Corbin Dual-tour seat & backrest, which I'll have before Cambo and I ride out to Sturgis.

That seat is going to look and feel good on that scooter!

Enjoy!
Title: Re: What did you do to or on your CVO today?
Post by: kiro on June 20, 2017, 09:03:50 AM
Quote
That seat is going to look and feel good on that scooter!

I sure hope so Jock! I really don't have any issue with the stock seat and have ridden on it for many hours at a time, but it developed a tear from so many mount/dismounts were my boot dragged across the saddle - I'm short-legged <g>... Doesn't appear anyone can or will re-cover a Hammock saddle after checking around, so rather than buy a new version of the same, went with Corbin after a lot of research. Had it customized a bit and with heat it's probably four weeks out on delivery.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on June 20, 2017, 06:50:02 PM
Spent several hours cleaning a multitude of bug hits all over my scoot after the MITM run. Looks good now cleaned up. Ordered a Corbin Dual-tour seat & backrest, which I'll have before Cambo and I ride out to Sturgis.
WOW. That will look sharp!  :2vrolijk_21: :2vrolijk_21: :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Hnhcvo on June 20, 2017, 09:35:21 PM
Started putting together my stretched tank. Just have to let it cure over night then clean out the gas filler and gauge hole. The fit up the seat and off to paint! (https://uploads.tapatalk-cdn.com/20170621/5f0acc90346a77ea15874322200ca72a.jpg)(https://uploads.tapatalk-cdn.com/20170621/64721ce025a3ef7c3c90c6271e83c514.jpg)


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: redbeard719 on June 22, 2017, 02:33:10 PM
I removed the stock compensator of my 2010 FLHXSE.  After 42k+ miles, it finally started talking back to me after I had a Fuel Moto 126" Outlaw engine installed last fall.

(http://img.photobucket.com/albums/v322/gtigye79/20170610_111946_zps5jdychuw.jpg) (http://smg.photobucket.com/user/gtigye79/media/20170610_111946_zps5jdychuw.jpg.html)

After that, I ordered new parts:
  • Baker Armored Attitude Primary Chain Tensioner
  • Evolution Industries 34T Solid Sprocket
  • Deka Replacement Battery (Coming up on 8yrs with the stock battery!)

Installed the Evo Ind 34T sprocket and Baker adjuster last night...Tonight I'll have it all finished up.

(http://img.photobucket.com/albums/v322/gtigye79/20170621_193936_zps1c3s3fc3.jpg) (http://smg.photobucket.com/user/gtigye79/media/20170621_193936_zps1c3s3fc3.jpg.html)

(http://img.photobucket.com/albums/v322/gtigye79/20170621_1939480_zpswid6xfs0.jpg) (http://smg.photobucket.com/user/gtigye79/media/20170621_1939480_zpswid6xfs0.jpg.html)

(http://img.photobucket.com/albums/v322/gtigye79/20170621_194017_zpsrvcfmr7a.jpg) (http://smg.photobucket.com/user/gtigye79/media/20170621_194017_zpsrvcfmr7a.jpg.html)
Title: Re: What did you do to or on your CVO today?
Post by: OBB on June 22, 2017, 07:35:14 PM
20K service on mine today. Good for another 5k miles. :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Rooster on June 27, 2017, 06:32:28 PM
Installed the Evo Ind 34T sprocket and Baker adjuster last night...Tonight I'll have it all finished up.

(http://img.photobucket.com/albums/v322/gtigye79/20170621_193936_zps1c3s3fc3.jpg) (http://smg.photobucket.com/user/gtigye79/media/20170621_193936_zps1c3s3fc3.jpg.html)

(http://img.photobucket.com/albums/v322/gtigye79/20170621_1939480_zpswid6xfs0.jpg) (http://smg.photobucket.com/user/gtigye79/media/20170621_1939480_zpswid6xfs0.jpg.html)

(http://img.photobucket.com/albums/v322/gtigye79/20170621_194017_zpsrvcfmr7a.jpg) (http://smg.photobucket.com/user/gtigye79/media/20170621_194017_zpsrvcfmr7a.jpg.html)
I hope you have better results than I with the Evo Ind sprocket. Vibrated terrible over 50 mph, both my arms and legs.
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on June 27, 2017, 09:26:56 PM
put new rear tire on THE RENTAL  :2vrolijk_21: went with commander 2
Title: Re: What did you do to or on your CVO today?
Post by: OBB on June 28, 2017, 09:03:25 PM
Dropped it off after work at the dealer. Left the house this morning and it was 55* out. 12 mile ride to work and the coolant light came on. Just had the 20k service done last week. Hopefully it's just a wire that got knocked loose somehow.
Title: Re: What did you do to or on your CVO today?
Post by: Dennis97 on June 28, 2017, 10:18:48 PM
Added SE shift linkage.
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on June 28, 2017, 10:20:10 PM
Just rode it.  Then later rode the other one. 
Title: Re: What did you do to or on your CVO today?
Post by: Jock on June 29, 2017, 06:54:22 AM
Just rode it.  Then later rode the other one.

That's a novel idea!
 
:2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on June 29, 2017, 12:05:27 PM
That's a novel idea!
 
:2vrolijk_21:

Have been finding that "first one then the other plan" to work really well Jock.  It keeps the bikes happy.  It's bad when one of your bikes gets jealous. 

This morning took the Road King about 35 miles to get to a breakfast spot a couple miles from the house.  This evening the Road Glide will ride to a taco shack at a lake.  It'll be 100 mile round trip.  Tomorrow?  Rinse and repeat.  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: redbeard719 on June 29, 2017, 03:58:38 PM
Quote from: Rooster
I hope you have better results than I with the Evo Ind sprocket. Vibrated terrible over 50 mph, both my arms and legs.

Thank you.  Rode for about 325 miles on Sunday, all types of conditions - mountain passes, country roads, interstate, etc.

It's very smooth and I'm pleased with the results.  I do believe the S&S crankshaft in the bottom end contributes greatly to the satisfactory results.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on June 29, 2017, 07:00:02 PM
Dropped it off after work at the dealer. Left the house this morning and it was 55* out. 12 mile ride to work and the coolant light came on. Just had the 20k service done last week. Hopefully it's just a wire that got knocked loose somehow.
Picked it up today. They put 25 miles on it in 80* degree heat and couldn't get it to come back on. Fans are working as they should. Might have been a burp in the coolant as my tech said he had to add a little last week during the 20K service.
Title: Re: What did you do to or on your CVO today?
Post by: Hnhcvo on July 03, 2017, 05:42:31 PM
Took best radical and best of show in a regional event this weekend.  Pretty happy the motorcycle community digs my build (https://uploads.tapatalk-cdn.com/20170703/11ea96eb08fc1f5e4478ff63113bc11b.jpg)


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: OBB on July 03, 2017, 08:39:59 PM
yesterday, met up with serdvd6 and his little lady and rode down to Hocking Hills, Ohio to meet up with Maczter and a few other buddies from the Dayton area for lunch. We ended up with 325 miles for the day. Great weather and nice roads. Well, the tar snakes on the one leg got a little interesting but we just slowed the bikes down a little.
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on July 03, 2017, 11:14:07 PM
Took best radical and best of show in a regional event this weekend.  Pretty happy the motorcycle community digs my build (https://uploads.tapatalk-cdn.com/20170703/11ea96eb08fc1f5e4478ff63113bc11b.jpg)


Sent from my iPhone using Tapatalk
Congrats and well deserved!!
Title: Re: What did you do to or on your CVO today?
Post by: CHH_Badkarma on July 04, 2017, 05:54:07 PM
Hit a couple local little places with the girly today. Hot dog shop and a shaved ice shop.

yum
(http://i38.photobucket.com/albums/e121/Direwolf3050/IMG_0862_zpsm8qnrdxg.jpg) (http://s38.photobucket.com/user/Direwolf3050/media/IMG_0862_zpsm8qnrdxg.jpg.html)

Once we got home I finally stopped draggin my feet and gave Bill a call(super surprised he was in)  and put in an order for an Oil Bud cooler  :bananarock:
 Figured since it is getting warm again it was time to get one.
Title: Re: What did you do to or on your CVO today?
Post by: BostonboyDH on July 10, 2017, 09:48:09 AM

  Installed a set of Ohlins 159's

Title: Re: What did you do to or on your CVO today?
Post by: Hnhcvo on July 10, 2017, 09:53:14 AM
Put on around 1500 miles the last 4 days through the Adirondacks  (https://uploads.tapatalk-cdn.com/20170710/1ec607ca8a5f377d86e4d6bddfe9b062.jpg)(https://uploads.tapatalk-cdn.com/20170710/8b2d23c6320096512511eaf0a05ae9d6.jpg)(https://uploads.tapatalk-cdn.com/20170710/7a77e90ba4c234343dfbe251cd5189e6.jpg)


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Hnhcvo on July 10, 2017, 09:55:04 AM
And a couple more(https://uploads.tapatalk-cdn.com/20170710/72aff0c618760998322864594715965b.jpg)(https://uploads.tapatalk-cdn.com/20170710/91714a39f57fe0490c2c5b9a1dda419d.jpg)(https://uploads.tapatalk-cdn.com/20170710/399390f60b4154ede2c6f627195a87c9.jpg)


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on July 10, 2017, 06:10:12 PM
I drug my 2004 Huckleberry out, started her up, and rode it around Princeton a little. Then I got to feeling bad because I have been neglecting her since acquiring the Road King so I gave her a good bath and shined her up a little. The old girl still looks pretty darn good....
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on July 11, 2017, 08:57:39 PM
cleaned some chrome today and figured out what made a bad grinding noise on the pig trail when i was in Arkansas last month... now the right side almost matches the left  :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on July 11, 2017, 09:00:43 PM
left side from last September
Title: Re: What did you do to or on your CVO today?
Post by: OBB on July 11, 2017, 09:33:03 PM
cleaned some chrome today and figured out what made a bad grinding noise on the pig trail when i was in Arkansas last month... now the right side almost matches the left  :nixweiss:
That's only because you had to poop really bad.  :huepfenlol2:
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on July 11, 2017, 11:14:47 PM
That's only because you had to poop really bad.  :huepfenlol2:
lol... only a few know about that
Title: Re: What did you do to or on your CVO today?
Post by: HDMIKETN64 on July 12, 2017, 05:09:22 PM
Does it count that I wish I was on my FLHTKSE today instead of being stuck in an airport? I'm hoping to get home early enough tonight to ride a bit.


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: HDMIKETN64 on July 12, 2017, 05:10:12 PM
left side from last September

Sweet!


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: HDMIKETN64 on July 12, 2017, 05:12:17 PM
Put on around 1500 miles the last 4 days through the Adirondacks  (https://uploads.tapatalk-cdn.com/20170710/1ec607ca8a5f377d86e4d6bddfe9b062.jpg)(https://uploads.tapatalk-cdn.com/20170710/8b2d23c6320096512511eaf0a05ae9d6.jpg)(https://uploads.tapatalk-cdn.com/20170710/7a77e90ba4c234343dfbe251cd5189e6.jpg)


Sent from my iPhone using Tapatalk

Beautiful country up there. And I'm sure the beer was cold!


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Hnhcvo on July 12, 2017, 06:04:27 PM
Beautiful country up there. And I'm sure the beer was cold!


Sent from my iPhone using Tapatalk
It was man!!! Don't have much like this around us in south east Ontario Canada.  Gotta love merica!! You guys have some pretty awesome country side


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: kiro on July 13, 2017, 06:29:48 PM
Installed the newly arrived seat - road test tomorrow... This is a phone image.
Title: Re: What did you do to or on your CVO today?
Post by: King Glide on July 13, 2017, 06:53:57 PM
Wow, that's gorgeous. And, all I did with my bike today was sit next to it and watch it rain....
Title: Re: What did you do to or on your CVO today?
Post by: kiro on July 13, 2017, 06:58:58 PM
That's why I wasn't out riding King Glide - sporadic rain. Tomorrow is supposed to be nice.
Title: Re: What did you do to or on your CVO today?
Post by: Jock on July 13, 2017, 09:00:07 PM
Installed the newly arrived seat - road test tomorrow... This is a phone image.

(https://www.cvoharley.com/smf/index.php?action=dlattach;topic=89705.0;attach=301625;image)

Nice!
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on July 13, 2017, 09:12:50 PM
With a bit of modification to the stock brake lever, I installed this Airflow brake pedal pad that fits Dynas and softails.
Almost 2" more room for my foot and looks better to me
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on July 14, 2017, 08:48:02 AM
Installed the newly arrived seat - road test tomorrow... This is a phone image.

Corbin sure makes a nice product.  Good looking seat, sir.
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on July 14, 2017, 11:20:48 AM
Installed the newly arrived seat - road test tomorrow... This is a phone image.

So how long before you send Corbin the passenger backrest to get it stitched to match?  :huepfenlol2:
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on July 15, 2017, 01:08:24 AM
With a bit of modification to the stock brake lever, I installed this Airflow brake pedal pad that fits Dynas and softails.
Almost 2" more room for my foot and looks better to me
I did the exact same thing with the EZ Brake so it wouldn't hit my lowers
Title: Re: What did you do to or on your CVO today?
Post by: MIKEYTEE on July 15, 2017, 03:38:13 PM
I was going to change out my gauges but, I don't have the replacements. They got left behind somewhere in MO.
Mike
 :oops:
 :drink:
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on July 15, 2017, 04:14:12 PM
I was going to change out my gauges but, I don't have the replacements. They got left behind somewhere in MO.
Mike
 :oops:
 :drink:

The gauges were in a box by themselves.  All packed at like iski levels of comfort and safety.  They left a couple days after the other three boxes.  Will have to find the tracking number then see what happened.

It's either that or they're in Maggie Valley attached to your engine  :o .
Title: Re: What did you do to or on your CVO today?
Post by: grim on July 15, 2017, 08:36:47 PM
With a bit of modification to the stock brake lever, I installed this Airflow brake pedal pad that fits Dynas and softails.
Almost 2" more room for my foot and looks better to me
Is that part # 50600165 ?
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on July 15, 2017, 11:20:46 PM
Is that part # 50600165 ?

Yeppers, that's the one
Title: Re: What did you do to or on your CVO today?
Post by: Jock on July 16, 2017, 01:04:30 PM
Today the bike was taken in for service and preparation for the next adventure!

 :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on July 16, 2017, 09:53:50 PM
Parked it in Elkhart lndiana ... heading to New York
Title: Re: What did you do to or on your CVO today?
Post by: OBB on July 17, 2017, 06:24:30 AM
Parked it in Elkhart lndiana ... heading to New York
Wave when you go past. Should be within an hour of me depending on what part of Ohio you're passing through.
Title: Re: What did you do to or on your CVO today?
Post by: kiro on July 17, 2017, 08:50:05 AM
Quote
Corbin sure makes a nice product.  Good looking seat, sir.
Thanks Mr. Haird!
Quote
So how long before you send Corbin the passenger backrest to get it stitched to match?
Already contacted them about it Twolanerider. No great hurry but I'd like to get this done. Didn't go with the Corbin version because it utilizes a single center-line post. I like to tie off my camera gear in the passenger seat and the H-D version has a double support - very rigid. Should have thought to send the backrest in immediately, but didn't know how all this would work out.

On the same topic I'd comment that I really like this saddle. I put off making the change for several reasons, two being I read the Corbin version can sometimes be a bit higher and push the rider back - didn't want either of these changes. I was concerned about spending that much cash and finding out I didn't like it. I feel like this saddle was designed for me and am pleased with the riding position change and saddle/ground distance. Any of you that may be a touch vertically challenged as I was on the stock seat, I'd recommend going this route - I should have done this several years ago.
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on July 17, 2017, 09:57:55 AM
I feel like this saddle was designed for me and am pleased with the riding position change and saddle/ground distance. Any of you that may be a touch vertically challenged as I was on the stock seat, I'd recommend going this route - I should have done this several years ago.

I will agree with you on the comfort.  I've put many a mile on Corbin saddles back in the 90's on two different bikes.  Loved the ride and all day comfort.  If I were not happy with the stock saddle on Beauregard, I would be "saddling up" to a Corbin again.
Title: Re: What did you do to or on your CVO today?
Post by: Lars on July 18, 2017, 08:48:38 AM
Replaced the battery on my SEUC8 due to it becoming a bit sluggish on startup.
She turns over just fine now.

Title: Re: What did you do to or on your CVO today?
Post by: dennis karsen on July 19, 2017, 12:29:12 AM
That is a beautiful looking bike, hard to beat that color scheme.

I used to live in Vancouver Canada, know Custer quite well, live in Santa Fe NM now.
Title: Re: What did you do to or on your CVO today?
Post by: Bluenuts on July 19, 2017, 07:17:42 PM
(https://uploads.tapatalk-cdn.com/20170719/5a07f19e75cf8f34b01adb86be5cf144.jpg)
6.5" Klockwerks vs stock '17 CVO Wind Splitter


Sent from my iPhone using Tapatalk



Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Lars on July 20, 2017, 10:31:25 AM
That is a beautiful looking bike, hard to beat that color scheme.

I used to live in Vancouver Canada, know Custer quite well, live in Santa Fe NM now.

Thanks for the kind words.
Big difference between living in Van and living in Santa Fe.

Cleaned the scoot today in preparation for "Scooters for Hooters" run this Saturday in support of breast cancer research.
Title: Re: What did you do to or on your CVO today?
Post by: iski on July 20, 2017, 10:48:25 AM
Cleaned up bike in preparation for a Nation of Patriots fundraiser at a bike night today.  Nation of Patriots supports wounded veterans and gives 100% of the money collected directly to recovering vets in their local areas.  An all volunteer 501(C)3 charity.  Very good cause.
Title: Re: What did you do to or on your CVO today?
Post by: TN on July 21, 2017, 06:34:50 PM
Replaced comp with 42k miles on it, was getting hot start kickback on occasion. Some flatspots on the spokes.
Compensator has 42k miles, a few more on the bike.  :drink:

Seems tight now  :bananarock:


TN
Title: Re: What did you do to or on your CVO today?
Post by: TN on July 22, 2017, 12:03:46 PM
Took an early morning shakedown ride to one of my spots, Broad River. Getting a bit warm down here to be out riding for long.


Life is good  :orange:


TN
Title: Re: What did you do to or on your CVO today?
Post by: JoeVibe on July 24, 2017, 12:05:45 PM
Just finished installing a Native Custom Baggers fat tire kit, new Legends suspension, FTD wheels, and a Yelvington reverse pulley on the Road King. The improvement in ride and handling is way better than I hoped for. I want to put up a few pictures to show you all how it came out so bare with me.

Joe
Title: Re: What did you do to or on your CVO today?
Post by: JoeVibe on July 24, 2017, 12:08:13 PM
The fender was painted by CPV Paint and Graphics in Wisconsin. The color and graphics match are perfect.
Title: Re: What did you do to or on your CVO today?
Post by: JoeVibe on July 24, 2017, 12:11:02 PM
Here's a better look at the FTD wheel. Check out the matching rotor.
Title: Re: What did you do to or on your CVO today?
Post by: JoeVibe on July 24, 2017, 12:11:37 PM
Last one, front view.
Title: Re: What did you do to or on your CVO today?
Post by: BostonboyDH on July 24, 2017, 03:29:13 PM

  Love the look Joe!!!!

BostonBoy
Title: Re: What did you do to or on your CVO today?
Post by: Mr D on July 24, 2017, 04:06:36 PM
The fender was painted by CPV Paint and Graphics in Wisconsin. The color and graphics match are perfect.

I've had CPV color match many items.
They're located 15 minutes from me, Great work, Very reasonable, Great people to deal with  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: JoeVibe on July 24, 2017, 04:54:44 PM
I've had CPV color match many items.
They're located 15 minutes from me, Great work, Very reasonable, Great people to deal with  :2vrolijk_21:

I have to admit I was leery at first because I just found them on the internet and had no references from anyone I knew, especially when they told me they were running on a 3-4 week turn around.. The paint on the fender was sooooo important, I didn't know if they, or anyone, could do the job I wanted that quickly.  It actually took them 5 weeks to get the fender back to me and they apologized for taking so long. I dealt with two different women there during the process and they were both terrific to deal with. I will absolutely use them again!!
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on July 24, 2017, 05:33:35 PM
Nothing to it; yet.  Did go to a local powder coat shop and pick up some pieces had dropped off a couple weeks ago.  Several other small parts but these will be the jewels.  For the old Road Glide.  She's going to get a top end job after years of stellar service.

It's a color called Illusion Malbec (I don't know where the name comes from either).  It's a really good match to the Midnight Red that is the predominant color on the bike.  Did a set of calipers as a test run back in May to see if I'd like it.  Very pleased so sent several other parts to finish things out.

Wish the pics showed the flake in the color.  It shows, barely.  Looks so much better in person in the sunlight though.  Cylinders and heads will now get diamond cut as the next step in the process.  Hopefully by the new year break will have everything done and back in hand to install it all. 

(gotta love having spare parts around to do this stuff with)
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on July 24, 2017, 05:34:21 PM
.
Title: Re: What did you do to or on your CVO today?
Post by: HDMIKETN64 on July 24, 2017, 09:57:12 PM
I didn't do anything today, but we rode nearly 400 miles on Saturday, from Clarksville to Tuscumbia, AL and back. I flipped over 1,100 miles on FLHTKSE.


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Hnhcvo on July 25, 2017, 05:28:27 PM
Picking up my new dash and stretched tank(https://uploads.tapatalk-cdn.com/20170725/bbedf82e4961067eca11c8f7010df775.jpg)(https://uploads.tapatalk-cdn.com/20170725/334798c9343f638b59eb62a6500ebea5.jpg)(https://uploads.tapatalk-cdn.com/20170725/ed1e4db13828f5b1adc87a0695f22f79.jpg)


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on July 28, 2017, 08:35:53 PM
I went with yaffe 14 "bars today. Really like em and all the stock wiring and cables worked perfectly. .  :2vrolijk_21:Stuart
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on July 28, 2017, 08:37:56 PM
One more. 
Title: Re: What did you do to or on your CVO today?
Post by: johnsachs on July 29, 2017, 06:02:36 PM
Those are tall. Hands in the air.  :nixweiss:
John
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on July 29, 2017, 07:07:25 PM
Yesssss Siiiiiiir.  Love em.  :huepfenjump3:
Title: Re: What did you do to or on your CVO today?
Post by: SIKBIRD on July 29, 2017, 09:03:01 PM
50,000 mile service...of course the day I plan to do it was the the first day in months that there was no rain, low humidity, and relatively low temperatures.  Perfect day for riding but I spent all day wrenching😩
Title: Re: What did you do to or on your CVO today?
Post by: zigzag930 on July 31, 2017, 10:35:22 PM
Removed stock HD Stage 1 6'5's and installed HCX165's in front fairing FLTRUSE.

Installed a "Drink Thing" on the clutch side.  Great new product!
Title: Re: What did you do to or on your CVO today?
Post by: Jock on August 01, 2017, 07:51:32 AM
Packed her up!

 :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: 110Mofo on August 01, 2017, 08:34:14 AM
 My good Friend Wrongway helped me find a break in the ignition wire to get Ziggy back on the road  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on August 01, 2017, 09:08:44 AM
Working on the packing....sure miss a Bushtec for the long trips.  I completed all the service on Beauregard last night..."Go West, young man" (and lady... ;D).  Lord willing, Vickie and I are heading to Wyoming this week.
Title: Re: What did you do to or on your CVO today?
Post by: longlast on August 01, 2017, 09:33:14 AM
Sounds great Howard,
You and Vickie have a safe trip and lot's & lot's of fun. Will look forward to seeing some pics. :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Jock on August 01, 2017, 12:07:49 PM
Working on the packing....sure miss a Bushtec for the long trips.  I completed all the service on Beauregard last night..."Go West, young man" (and lady... ;D).  Lord willing, Vickie and I are heading to Wyoming this week.

Most Excellent!
Title: Re: What did you do to or on your CVO today?
Post by: Rooster on August 01, 2017, 12:40:57 PM
My good Friend Wrongway helped me find a break in the ignition wire to get Ziggy back on the road  :2vrolijk_21:

Good find. Looks like a clean break almost like it was cut.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on August 01, 2017, 08:18:23 PM
My good Friend Wrongway helped me find a break in the ignition wire to get Ziggy back on the road  :2vrolijk_21:
How the hell did that happen?
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on August 01, 2017, 08:27:08 PM
How the hell did that happen?

The other bike picked up a bad case of wire-mites in Arkansas.  They eat lifters too.  Then they jumped from one bike to the other when he got home.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on August 01, 2017, 09:14:52 PM
The other bike picked up a bad case of wire-mites in Arkansas.  They eat lifters too.  Then they jumped from one bike to the other when he got home.
I stalked him on facebook and Dave gave up the answers. lol
Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on August 06, 2017, 08:14:37 PM
Installed Legend Aero front,  Legend Revo-A rear and Lyndall composite rear rotor with gold pads on my 2012 CVO RG Custom. Worth every dollar.

Sent from my SM-G935P using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: Grizzly on August 07, 2017, 06:30:12 PM
I put it to wonderful use on a special ride...

A few years back my aunt turned 90 and I suggested that she might enjoy a ride on my Harley.  Being the energetic person that she is, she jumped at the chance to have her first ever ride on a motorcycle in her life!  So a took a few others with me and off we went on a short 10 minute ride with her and 4 or 5 other riders.

She enjoyed it so much that every year since she kept asking when I was coming back for her next ride.  Last year she claimed she was getting old and I had better hurry.

With her turning 95 last month I figured it was time to do it again and phoned to ensure she was still up for it.  To no surprise at all, she was and could hardly wait.  This time I decided to give her a real big thrill and invited a few more to join in the fun.  We blew Aunt Annie away when we showed up with 23 riders and this time the ride lasted 40 minutes, and she now is looking forward to the next ride.

We all made a deal with her that we would bring back 100 riders for her next ride on her 100th birthday!

Aunt Annie (dressed in red in photo) is a true inspiration to us all - still lives alone in her own home and drives her own car at 95!  Every Thursday she picks up my 90 hear old Aunt Ruth (to the left of Annie in photo)  and off to the casino they go. 
Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on August 10, 2017, 07:58:07 AM
Finally decided to update the mileage on the motorcycles I had registered with HOG.  Since 2004 a total of 318,000 miles on 9 CVO motorcycles.(https://uploads.tapatalk-cdn.com/20170810/cf265550c378d3a201135d8d4264a46c.jpg)

Sent from my SM-G935P using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: YELLOWBIRD on August 10, 2017, 08:03:55 AM
Finally decided to update the mileage on the motorcycles I had registered with HOG.  Since 2004 a total of 318,000 miles on 9 CVO motorcycles.(https://uploads.tapatalk-cdn.com/20170810/cf265550c378d3a201135d8d4264a46c.jpg)

Sent from my SM-G935P using Tapatalk




Congrats Joe.

I hope you have at least one long arm or long torso to put all those patches on!  ;D :P :)


 :2vrolijk_21:

YB
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on August 10, 2017, 08:25:54 AM



Congrats Joe.

I hope you have at least one long arm or long torso to put all those patches on!  ;D :P :)


 :2vrolijk_21:

YB

My guess is two rows.

Great job on lots of Miles Joe. 
Title: Re: What did you do to or on your CVO today?
Post by: KGB on August 15, 2017, 10:52:15 PM
Mounted new tires today, went with Michelin commander II(https://uploads.tapatalk-cdn.com/20170816/60fc2e1d4fc6d8a8b146bca1566ee577.jpg)(https://uploads.tapatalk-cdn.com/20170816/4778d23b1cb1b1f851ced1aff6e47101.jpg)


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: OBB on August 16, 2017, 02:53:34 PM
Mounted new tires today, went with Michelin commander II(https://uploads.tapatalk-cdn.com/20170816/60fc2e1d4fc6d8a8b146bca1566ee577.jpg)(https://uploads.tapatalk-cdn.com/20170816/4778d23b1cb1b1f851ced1aff6e47101.jpg)


Sent from my iPhone using Tapatalk
Let me know what you think of them after the trip to MV.

Sent from my XT1254 using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: KGB on August 16, 2017, 02:57:04 PM
Let me know what you think of them after the trip to MV.

Sent from my XT1254 using Tapatalk
I just road down to Hales, so far so good


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: skratch on August 16, 2017, 04:54:28 PM



Congrats Joe.

I hope you have at least one long arm or long torso to put all those patches on!  ;D :P :)


 :2vrolijk_21:

YB

or you could just use the one rocker with the most miles on it.  It could be (correctly) assumed that if you had a 300,000 mile patch, that you've also ridden 250,000 200,000 etc....

unless you like a lot of patches
Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on August 16, 2017, 08:03:22 PM
or you could just use the one rocker with the most miles on it.  It could be (correctly) assumed that if you had a 300,000 mile patch, that you've also ridden 250,000 200,000 etc....

unless you like a lot of patches
I was thinking of doing something like that.

Sent from my SM-G935P using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on August 16, 2017, 08:05:00 PM
Got 25,000 mile service done today on my 2017 CVO Street Glide.

Sent from my SM-G935P using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on August 16, 2017, 08:19:02 PM
Got 25,000 mile service done today on my 2017 CVO Street Glide.

Sent from my SM-G935P using Tapatalk
Dang, I am way behind you Joe.  I have right at 18,400 on mine.
Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on August 16, 2017, 08:21:04 PM
Dang, I am way behind you Joe.  I have right at 18,400 on mine.
It helps being retired.

Sent from my SM-G935P using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: KGB on August 16, 2017, 08:23:21 PM
It helps being retired.

Sent from my SM-G935P using Tapatalk
:biggthumpup: :biggthumpup: :biggthumpup:
Title: Re: What did you do to or on your CVO today?
Post by: wtfdskin on August 16, 2017, 09:22:42 PM
Put a stator in my buddys 99 wide glide for him then test rode it. Then rode my 2012 SESG.......Still smiling 😁
Title: Re: What did you do to or on your CVO today?
Post by: LMR on August 19, 2017, 05:14:27 PM
Installed a Freedom 14" windscreen and ordered a dx head pipe along with their 2" inserts.
Title: Re: What did you do to or on your CVO today?
Post by: pudgeyxj on August 19, 2017, 05:20:32 PM
Bought another years insurance, and booked it in for next month for Fueling lifters, Zippers tensioner, Woods cams, and full D&D exhaust with a falsie. Can't wait, so excited!!!

 :drink:

Paul
Title: Re: What did you do to or on your CVO today?
Post by: pudgeyxj on August 19, 2017, 05:21:34 PM
Oh, and a clutch upgrade :)

Title: Re: What did you do to or on your CVO today?
Post by: SIKBIRD on August 19, 2017, 07:26:22 PM
Installed the Vtwingoodies footboard extensions, took it for a hot-lap and man what a difference the extensions make!  Also took the outer fairing off and epoxied the windshield bosses (all 3 broke on a road trip in May). 
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on August 19, 2017, 07:29:43 PM
Killed some bugs with it.
Title: Re: What did you do to or on your CVO today?
Post by: 4fun on August 19, 2017, 09:15:40 PM
Left it at the Harley Dealer, broken.

Sent from my SM-G930V using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: JCZ on August 19, 2017, 10:37:36 PM
R&R the battery.
Title: Re: What did you do to or on your CVO today?
Post by: skratch on August 20, 2017, 01:46:31 PM
Left it at the Harley Dealer, broken.

Sent from my SM-G930V using Tapatalk

boo!  hope all is taken care of soon.
Title: Re: What did you do to or on your CVO today?
Post by: 4fun on August 20, 2017, 02:08:41 PM
boo!  hope all is taken care of soon.
I was hoping to try and sneak down to Maggie Valley GTG for a couple of days, but don't think that will happen now.

Sent from my SM-G930V using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: SGME9 on August 22, 2017, 03:31:23 PM
I added reduced reach Handle bars.
Title: Re: What did you do to or on your CVO today?
Post by: Dan_Lockwood on August 22, 2017, 03:49:42 PM
Killed some bugs with it.

Sometimes you're the bug and sometimes you're the windshield.

Glad to hear that you were the windshield this time... :)
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on August 22, 2017, 09:53:05 PM
Sometimes you're the bug and sometimes you're the windshield.

Glad to hear that you were the windshield this time... :)

And I wasn't even having the best day of the day's ride.  Was out with one of the brethren just tagging along while he was bringing home a brand new bike.  His grin riding in front of me was so wide almost no bugs actually made it back to me.  ;D
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on August 22, 2017, 10:49:49 PM
Dug ol Betsy out of her hiding place and gave her a bit of exercise.
Title: Re: What did you do to or on your CVO today?
Post by: Grizzly on August 23, 2017, 12:44:47 AM
After seeing the 2018 lineup, I went to the garage and hugged my current CVO.

That's what I did to my CVO today, and I'm sure I will many more times - waiting for the 19's to come out.
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on August 23, 2017, 09:05:06 AM
After seeing the 2018 lineup, I went to the garage and hugged my current CVO.

That's what I did to my CVO today, and I'm sure I will many more times waiting for the 10's to come out.

I know what you mean there Griz. I went in to work this morning and while I was covering up Ol Betsy I thought how pretty she was compared to the new bikes. Same for Orange Crush.
Title: Re: What did you do to or on your CVO today?
Post by: Lars on August 23, 2017, 12:43:00 PM
Did nothing to my SEUC8 but added bullet lights front and rear on Ol' Black Betty.
Title: Re: What did you do to or on your CVO today?
Post by: ArtvR on August 23, 2017, 01:21:35 PM
I filled the tank on my FLTRSEI2 this morning with non-ethanol 91 because my local station was closed Saturday before I went on a 175 mile club ride and had to fill up with 10% ethanol. Ran just ok on the highway but by the time I returned to the local streets later in the day it was runnng like crap. The 95 inch motor hates ethanol! After about ten miles it runs smooth again.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on August 24, 2017, 08:28:53 AM
Yesterday an Legends AXEO front for cartridges were installed on the CVO Road King to go with the Ohlin 159 rear shocks.  Front sure was an improvement and complaints the rear well.
Title: Re: What did you do to or on your CVO today?
Post by: SneakyPete on August 27, 2017, 01:01:19 PM
Installed 16" Factory 47 Malos with new Magnum Shielding brake and clutch cables.  Actually did this awhile ago just forgot to post.
Title: Re: What did you do to or on your CVO today?
Post by: Singlebeam on September 01, 2017, 06:17:53 AM
Installed factoy 47 assault bars, passing lights with daymaker bulbs D&D exhaust, black lower forks
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on September 01, 2017, 08:19:36 AM
Rode mine home from MI yesterday afternoon, a nice 663 miles and beat the rain home.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on September 03, 2017, 08:06:51 AM
Spent most of Saturday removing everything added to my 2017 CVO Street Glide, as I traded it in on the 2018 CVO Road Glide.

I removed the docking hard ware, heavy breather, cup holder, hwy pegs and mounts, CB, CB antenna, and the garage door opener and the Paul yaffe plate frame.  I also removed the Klock werks windshield.  Only thing I left were the Paul Yaffe 14 Monkey bars.

I pick up the new bike at 11:00 today and drop this one off.

11 months 20510 miles on the CVOSG.  Glad to be back on a Road Glide
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on September 03, 2017, 09:10:49 AM
Congratulations, Dave. Many miles and smiles for you on the new scooter.
Title: Re: What did you do to or on your CVO today?
Post by: kiro on September 03, 2017, 09:11:49 AM
I'd ordered the matching backrest for my saddle from Corbin while in Sturgis. It arrived on Friday and I bolted it up...
Title: Re: What did you do to or on your CVO today?
Post by: Jock on September 03, 2017, 01:16:55 PM
I'd ordered the matching backrest for my saddle from Corbin while in Sturgis. It arrived on Friday and I bolted it up...

Nice addition
Title: Re: What did you do to or on your CVO today?
Post by: RGlideKid on September 03, 2017, 01:33:53 PM
I'd ordered the matching backrest for my saddle from Corbin while in Sturgis. It arrived on Friday and I bolted it up...

That is totally awesome, Kirk!  Congratulations, and great choice, my friend!
Title: Re: What did you do to or on your CVO today?
Post by: Grizzly on September 03, 2017, 03:26:07 PM
I'd ordered the matching backrest for my saddle from Corbin while in Sturgis. It arrived on Friday and I bolted it up...

Looks great!   :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Grizzly on September 03, 2017, 03:27:55 PM
Spent most of Saturday removing everything added to my 2017 CVO Street Glide, as I traded it in on the 2018 CVO Road Glide.

I removed the docking hard ware, heavy breather, cup holder, hwy pegs and mounts, CB, CB antenna, and the garage door opener and the Paul yaffe plate frame.  I also removed the Klock werks windshield.  Only thing I left were the Paul Yaffe 14 Monkey bars.

I pick up the new bike at 11:00 today and drop this one off.

11 months 20510 miles on the CVOSG.  Glad to be back on a Road Glide

Congrats, and many safe & carefree miles on your new RG... Pics forthcoming no doubt.  ;D
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on September 04, 2017, 06:36:09 AM
Congratulations, Dave. Many miles and smiles for you on the new scooter.

Well Yesterday dropped the 17 Street glide off, put the last 57 miles on her.  Put 100 miles on the new road glide.  At 65 miles I replaced the joke of a factory windshield with a Klock Werks 14" Sport Flair.  Also added a rider back rest from the street glide.

Congrats, and many safe & carefree miles on your new RG... Pics forthcoming no doubt.  ;D

Have several pictures in the road glide thread.  Need a few now with the new windshield and back rest.

(http://www.cvoharley.com/smf/gallery/6353_03_09_17_7_34_43.jpeg)

Plan to add a few more miles to her today,
Title: Re: What did you do to or on your CVO today?
Post by: Grizzly on September 04, 2017, 10:49:33 AM
Very cool indeed!

Thanks Dave.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on September 05, 2017, 07:42:40 AM
I put a nice 260 miles on her yesterday after the new shield and back rest.  Looks like rain today so I have a few projects to do on the bike. 

Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on September 05, 2017, 07:43:53 AM
Here is the delivery picture.

Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on September 06, 2017, 07:31:33 AM
Rainy day yesterday.  So I Installed the garage door opener, and I installed the CB.  The CB will require the WHIM interface cable thats about 50 dollars so it will transmit from the wireless head set.  It receives just fine, and radio recognized the addition right away.

Next I installed the 4 point quick detach hard ware.  I also went on and removed the passenger foot pegs and mounts, and plugged the holes.  I then installed the short angle hwy peg mounts.  When I went to put the foot pegs in them, I found both sided the allen bolt was stripped, it had pulled the aluminum onto the bolt threads.  Really upset me after measuring every thing to get them set up exactly the same.  So those go back to dealer today.

Last project was to install the Yaffe Stealth III black plate frame.  Well, didn't get that done either.  Seems that the 7/8 nut that holds the black plastic cover over the plug and bolts inside the fender turns and turns but does not come loose.

Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on September 07, 2017, 07:46:55 AM
Well I put another 140 miles on her yesterday, for a total of 526 miles.  I also put on the Yaffe Stealth III plate frame.

Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on September 07, 2017, 07:48:38 AM
I also removed the passenger foot pegs and mounted them on some short angle hwy pegs.  Hope to ride a hundred miles today, before I go back off shore for 3 long weeks of work.
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on September 07, 2017, 08:30:38 AM
I also removed the passenger foot pegs and mounted them on some short angle hwy pegs.  Hope to ride a hundred miles today, before I go back off shore for 3 long weeks of work.

Everything looks good on the bike, Dave.  Glad you are happy with the new ride.

That three weeks just helps support the habit, brother.... ;D :2vrolijk_21: :bananarock:
Title: Re: What did you do to or on your CVO today?
Post by: D-N-D on September 08, 2017, 05:51:01 AM
Very Nice Setup Good luck with the New Ride !!!

Dante
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on September 08, 2017, 09:25:22 AM
Everything looks good on the bike, Dave.  Glad you are happy with the new ride.

That three weeks just helps support the habit, brother.... ;D :2vrolijk_21: :bananarock:

Well I rode her over to the Hot Bike Kick-off party and Smoky Mountain Harley yesterday, so I got more miles on her.  When I got home put her in the garage on a battery tender.  I have 668 miles on her.  Got the new Yaffe 14 Monkey bars on order also.

Very Nice Setup Good luck with the New Ride !!!

Dante

Thank you.
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on September 08, 2017, 09:36:57 AM
Be safe heading back out to the rig for three weeks, chief. 

You know, if you don't want to keep it on a battery tender and your wife doesn't want to ride it while you are away, I can make some room in my garage and "store" it for you....I'd even ride it a bit just to keep the battery charged and fluids warm 'til you return..... ;D ::) :huepfenjump3: :bananarock: :huepfenlol2: :2vrolijk_21:

(that's what friends are for....)

Oh wait, I just remembered.....
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on September 08, 2017, 09:39:13 AM
Be safe heading back out to the rig for three weeks, chief. 

You know, if you don't want to keep it on a battery tender and your wife doesn't want to ride it while you are away, I can make some room in my garage and "store" it for you....I'd even ride it a bit just to keep the battery charged and fluids warm 'til you return..... ;D ::) :huepfenjump3: :bananarock: :huepfenlol2: :2vrolijk_21:

(that's what friends are for....)

Oh wait, I just remembered.....
Got on the rig about an hour ago.

We may or may not evacuate Saturday or Sunday depending on Irma.....
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on September 08, 2017, 09:41:56 AM
Got on the rig about an hour ago.

We may or may not evacuate Saturday or Sunday depending on Irma.....

You just answered my next question to you.  Well, if y'all end up staying put, baton the hatches and hold on..... :)
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on September 08, 2017, 09:46:32 AM
Picked up my newly de-catted header yesterday afternoon and, Lord willing, I'll install this afternoon....let you'uns know how it turned out in a day or so after my grin dissipates... ;D
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on September 08, 2017, 09:53:32 AM
I finally got tired of fearing the worst with the lifters in Orange Crush and decided to have the stock lifters replaced with S&S units. While I was at it I installed a set of Rockouts. This particular 110 engine was one of the quiet ones but there were witness marks on one rocker shaft. The Lockouts seam to have quietened it even further. The stock lifters at 12000 miles looked perfect by the way, no scoring of any type on lifters or cam.... ;D
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on September 08, 2017, 05:42:45 PM
Picked up my newly de-catted header yesterday afternoon and, Lord willing, I'll install this afternoon....let you'uns know how it turned out in a day or so after my grin dissipates... ;D
what you using for a tuner
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on September 08, 2017, 08:03:19 PM
what you using for a tuner
FP3. I'm using the map for V&H power duals and high output slipons with standard baffles. I've been sworn to secrecy on how that was decided... ::)
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on September 08, 2017, 08:04:33 PM
Pics of a decatted header done the proper way
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on September 08, 2017, 08:05:10 PM
Another
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on September 08, 2017, 08:05:58 PM
Looks like an all dog bar (no cats)
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on September 08, 2017, 08:09:56 PM
No wonder the dang things get hot and are so quiet. This is a before shot of the catalyst material
before gutting. 
Title: Re: What did you do to or on your CVO today?
Post by: Singlebeam on September 10, 2017, 11:50:47 AM
Added mirrors to my bars. Removed the fairing mirrors, which I hated. Also worked on  a go pro mount.
Title: Re: What did you do to or on your CVO today?
Post by: Aussie on September 11, 2017, 06:55:47 AM
No wonder the dang things get hot and are so quiet. This is a before shot of the catalyst material
before gutting.
Good job Haird,
Sure makes the engine breath easier and run cooler, also sounds a lot better.
These cats are just to restrictive.
Title: Re: What did you do to or on your CVO today?
Post by: Phreakyz on September 11, 2017, 07:07:42 AM
Shifter Linkage  :)
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on September 11, 2017, 07:25:42 AM
Picked up my newly de-catted header yesterday afternoon and, Lord willing, I'll install this afternoon....let you'uns know how it turned out in a day or so after my grin dissipates... ;D

Grin still in place but update is the thing runs great.  I would have done this sooner but was waiting for the warranty to expire.  I'm still pleased with the Fuel Pac 3 (FP3) choice and glad I went the less expensive route (again) of removing the catalyst out of the stock header. 
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on September 11, 2017, 04:02:27 PM
Cleaned the air filter on the rental... man those things get dirty after 19k miles :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: Aussie on September 12, 2017, 06:52:43 AM
Grin still in place but update is the thing runs great.  I would have done this sooner but was waiting for the warranty to expire.  I'm still pleased with the Fuel Pac 3 (FP3) choice and glad I went the less expensive route (again) of removing the catalyst out of the stock header.
Hey Haird, wise choice did you notice any difference in the sound now that the cats have been removed. Bet you feel the difference in heat as well.
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on September 12, 2017, 07:30:30 AM
Hey Haird, wise choice did you notice any difference in the sound now that the cats have been removed. Bet you feel the difference in heat as well.

Not that much louder but that's not really what I was wanting.  Having done this on past bikes (mine and others), I knew what to expect using the stock SE mufflers with the plugs removed.  It does have a bit of a bark to it but cruising and steady highway speeds are still comfortable sound wise.
The heat is reduced significantly as you would expect.  I am really enjoying the FP3, too.  It's so easy to use.  If I had chosen much more motor work, I would have taken the TTS route, however.  I was looking for inexpensive, better running, less heat and a bit more sound....mission accomplished. 
Title: Re: What did you do to or on your CVO today?
Post by: pvanwagner on September 12, 2017, 10:07:41 AM
Picked up my newly de-catted header yesterday afternoon and, Lord willing, I'll install this afternoon....let you'uns know how it turned out in a day or so after my grin dissipates... ;D

Who'd you use?  I'm considering this or new headers.  haven't decided yet.
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on September 12, 2017, 10:18:26 AM
Who'd you use?  I'm considering this or new headers.  haven't decided yet.


PM sent
Title: Re: What did you do to or on your CVO today?
Post by: havenolife on September 12, 2017, 10:27:26 AM
With the cat out do you get any at all pop or crack out of it I was thinking about doing the same thing but was also going to ceramic coat the pipe and leave every thing else stock [air cleaner & mufflers.
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on September 12, 2017, 12:27:57 PM
With the cat out do you get any at all pop or crack out of it I was thinking about doing the same thing but was also going to ceramic coat the pipe and leave every thing else stock [air cleaner & mufflers.
If it's tuned correctly there should be no to very little decel popping. If it was still stock tune wise with this setup, lots of backfire decel pop.
I'm not sure the ceramic coating buys you anything with the decatted stock header but hey, what do I know. I ain't never done the ceramic deal... ;D
Title: Re: What did you do to or on your CVO today?
Post by: havenolife on September 13, 2017, 02:16:10 PM
i have done the ceramic pipe on two other bikes and it does work cools the bike down nicely and thanks
Title: Re: What did you do to or on your CVO today?
Post by: FXD_TG on September 13, 2017, 09:00:52 PM
Made an appointment to see how well my ESP works....

Interesting noises coming from the primary case on about 1 out of 4 starts:

https://youtu.be/CmBQOX-LvSY
Title: Re: What did you do to or on your CVO today?
Post by: pudgeyxj on September 14, 2017, 10:50:44 AM
D&D Fat Cat with a falsie, Fueling lifters, Zippers tensioners, TW-7H cams, got rid of the slipper clutch, K&N filter. Got me just about 106hp and 118 TQ. I'm a happy camper (for now  :D ) She's pretty loud now, but I like it.


Cheers  :drink:

Paul
Title: Re: What did you do to or on your CVO today?
Post by: Rooster on September 14, 2017, 01:17:31 PM
Made an appointment to see how well my ESP works....

Interesting noises coming from the primary case on about 1 out of 4 starts:

https://youtu.be/CmBQOX-LvSY
Something wrong there for sure. Will wait to hear the outcome. Hope it gets resolved for you soon.
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on September 16, 2017, 12:35:41 PM
Apparently the "what I did to it today" entry is screwed up the transmission.  Probably the shift drum....  Nartz.
Title: Re: What did you do to or on your CVO today?
Post by: VANAMAL on September 16, 2017, 08:37:42 PM
Didnt we just talk transmissions a few days ago. Not good
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on September 16, 2017, 09:49:01 PM
Didnt we just talk transmissions a few days ago. Not good


Didn't think of that Van but we did.  Wonder if I jinxed something?

Don't think it's too bad though.  Haven't pulled the top cover yet but suspect I've done something to the shift pawl or perhaps a problem in the drum.  Upshifts are fine.  Down from 5 to 4 and from 4-3 are fine too.  3-2 ok sometimes.  2-1 less often.  When it doesn't shift down it stays in the higher gear but the shift pedal feels the same as it does on a false neutral; all the way to the floor and nothing happens. 

Was a little hairy first time it did it though.  I was playing on some country roads a bit and really needed to down shift  :oops: . 

That's ok, that's what the Travel Gods invented back brakes for....

Oh yeah, it's the Road King not the Road Glide.  SERG has a six speed in it.
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on September 16, 2017, 09:50:43 PM
^^^ hmmmm...... ^^^

Wonder if the Road King is saying it wants a six speed too?
Title: Re: What did you do to or on your CVO today?
Post by: Singlebeam on September 17, 2017, 06:16:29 PM
Added a hog trough drink holder to lower left fairing.
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on September 17, 2017, 08:22:14 PM
2013 is a six...


True.  But the Road King is perfect (sort of).
Title: Re: What did you do to or on your CVO today?
Post by: bigC on September 17, 2017, 09:25:25 PM
Rode it home from Maggie Valley today!
Title: Re: What did you do to or on your CVO today?
Post by: 110tHunDer on September 17, 2017, 09:49:01 PM
Cleaned it back up from Maggie Valley today!  Wet roads on Friday's ride and 900 miles of bugs. Yuck!  :P
Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on September 23, 2017, 08:23:13 PM
I got the wireless headset hooked up, CB, garage door opener, Kuryakyn license frame, docking hardware, backrest and custom dynamics brake strobe installed.(https://uploads.tapatalk-cdn.com/20170924/f673025e6f61296fe73e49ad4e30e18c.jpg)(https://uploads.tapatalk-cdn.com/20170924/8ff2db68e53210b8050d446bf8a03a73.jpg)(https://uploads.tapatalk-cdn.com/20170924/9fc925dc5cbf51f81b03f8922c2bd6d5.jpg)(https://uploads.tapatalk-cdn.com/20170924/cbec58bae3f82f2ae9ab4d5c79868e60.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on September 23, 2017, 09:08:58 PM
Looks great Joe!
Title: Re: What did you do to or on your CVO today?
Post by: OBB on September 28, 2017, 01:05:50 PM
Met up with Keith (Servdvd6)  for lunch. Only a couple more months of this up here til we put them up for the winter.(https://uploads.tapatalk-cdn.com/20170928/833a2df7fac6664de9f5e8e7288e8a16.jpg)

Sent from my XT1254 using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: Chief2505 on September 28, 2017, 02:37:43 PM
I started taking extras off my 13 CVO Ultra Classic in preparation for trading it in. No sense giving them the "extras" that they are not paying me for!
Title: Re: What did you do to or on your CVO today?
Post by: CVOBILLY on September 28, 2017, 10:36:12 PM
Purchased the Stage 4 Kit, Screaming Eagle tuner, D&D Exhaust and not sure what I will do next
Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on September 29, 2017, 07:40:20 PM
Got 1000 mile service done today on my 2018 CVO Street Glide. Really enjoying the new bike.(https://uploads.tapatalk-cdn.com/20170929/8b555f59ebbce4d4a3130b71a3f04028.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: CVOBILLY on September 29, 2017, 08:05:15 PM
Wow I checked that Bike out at the dealer the other day.  Very beautiful bike!!!
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on September 30, 2017, 12:56:57 AM
Got 1000 mile service done today on my 2018 CVO Street Glide. Really enjoying the new bike.(https://uploads.tapatalk-cdn.com/20170929/8b555f59ebbce4d4a3130b71a3f04028.jpg)
Gorgeous bike!
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on October 01, 2017, 08:20:05 AM
Well, I pulled the Front Fork reflectors off resterday.  Then I did the Cannonball Run at Smoky Mountain.  Put 405 miles on the bike enjoying great roads of East TN and NC.  Looking Glass Falls, Highest point on the parkway, then across Smoky Mountain National park.  Great day of riding.

Now taking the bike over to have the 1K service done with a little over 1100 miles on it.
Title: Re: What did you do to or on your CVO today?
Post by: YELLOWBIRD on October 01, 2017, 09:19:03 AM
Took the wife for a little jolt and ended up in North Carolina for some good Ole North Carolina Pulled Cue' and a couple cold ones.

It's amazing how much better our bikes ride when it's not 90d degrees outside!


 :drink:



YB
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on October 04, 2017, 07:56:37 AM
Monday morning, I stated out at 0400 for the Iron butt 1000 miles in 24 hours.  Stopped in Conway AR for dinner and some sleep after 1030 miles in 15 hours and 45 minutes.  Then left at 0430 to do the last 500 miles for my 1500 miles in 36 Hours.  Finished that by 1300 with 3 hours to spare. 

Washed the bike when I got home.  Have to get all the pictures and paper work together to submit for my Saddle Sore 1000 and my Butt Burner 1500.
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on October 04, 2017, 08:50:20 AM
Monday morning, I stated out at 0400 for the Iron butt 1000 miles in 24 hours.  Stopped in Conway AR for dinner and some sleep after 1030 miles in 15 hours and 45 minutes.  Then left at 0430 to do the last 500 miles for my 1500 miles in 36 Hours.  Finished that by 1300 with 3 hours to spare. 

Washed the bike when I got home.  Have to get all the pictures and paper work together to submit for my Saddle Sore 1000 and my Butt Burner 1500.

Congrats, Dave. 

Got my first set (SS and BB) April 2001.  Went from K'ville to Phoenix and back....3,692 miles in 4.5 days....yes :yes:  I was whupped   :rolleyes3:
Title: Re: What did you do to or on your CVO today?
Post by: DesertHOG on October 04, 2017, 12:03:19 PM
Monday morning, I stated out at 0400 for the Iron butt 1000 miles in 24 hours.  Stopped in Conway AR for dinner and some sleep after 1030 miles in 15 hours and 45 minutes.  Then left at 0430 to do the last 500 miles for my 1500 miles in 36 Hours.  Finished that by 1300 with 3 hours to spare. 

Washed the bike when I got home.  Have to get all the pictures and paper work together to submit for my Saddle Sore 1000 and my Butt Burner 1500.

Great job Dave. There's an "Iron Butt Motorcycle Riders" Facebook Group that has a lot of activity and would love to hear about your accomplishment. Welcome to the Club. https://www.facebook.com/groups/IBARiders/ (https://www.facebook.com/groups/IBARiders/)

Simon
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on October 05, 2017, 06:43:17 AM
Congrats, Dave. 

Got my first set (SS and BB) April 2001.  Went from K'ville to Phoenix and back....3,692 miles in 4.5 days....yes :yes:  I was whupped   :rolleyes3:

Wow, I bet you were whupped.  I decided to do this as my wife and I have several times gone to Sturgis or back in 2 days, under 36 hours and its 1550 from where we stay to our home.   Just never documented it.  Couple of summers go went to CA with a friend.  800 the first day then two 750 days in a row.

Figured it was time to get it documented.

Great job Dave. There's an "Iron Butt Motorcycle Riders" Facebook Group that has a lot of activity and would love to hear about your accomplishment. Welcome to the Club. https://www.facebook.com/groups/IBARiders/ (https://www.facebook.com/groups/IBARiders/)

Simon


Simon, I will check that out as soon as my ride gets registered and I get my number.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on October 05, 2017, 06:46:47 AM
Went for a short 215 mile ride yesterday with a friend. Up the Cherohala Skyway, stopped at the top for a cigar, then looped over and rode the dragon back.  Nice to ride curves rather than the interstate.

Also installed custom dynamics Halo turn signals and the new Klock Werks 12" Pro-tour windshield to test.

Title: Re: What did you do to or on your CVO today?
Post by: YELLOWBIRD on October 05, 2017, 07:03:40 AM
Monday morning, I stated out at 0400 for the Iron butt 1000 miles in 24 hours.  Stopped in Conway AR for dinner and some sleep after 1030 miles in 15 hours and 45 minutes.  Then left at 0430 to do the last 500 miles for my 1500 miles in 36 Hours.  Finished that by 1300 with 3 hours to spare. 

Washed the bike when I got home.  Have to get all the pictures and paper work together to submit for my Saddle Sore 1000 and my Butt Burner 1500.





Congrats Dave!!!


 :2vrolijk_21:



YB
Title: Re: What did you do to or on your CVO today?
Post by: 08glide on October 05, 2017, 05:45:36 PM
Dave, nice looking new ride. I was at the dealership today & hoping to see one in real life. being old USAF I like the gunship grey.   :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on October 06, 2017, 06:58:43 AM
Dave, nice looking new ride. I was at the dealership today & hoping to see one in real life. being old USAF I like the gunship grey.   :2vrolijk_21:

Retired Navy myself, so I did not want it, saw enough gray.  Saw it in person and changed my mind right away.

Road another 200 miles yesterday.  Had some errands to do and drop vent screens off at the powder coaters. 
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on October 07, 2017, 06:57:02 AM
I picked up my vent screens from the powder coater yesterday.  I also put just over 200 miles on the bike doing some errands.  Plan to ride over to Wheels Through Time with a few others today.
Title: Re: What did you do to or on your CVO today?
Post by: hooperville on October 07, 2017, 09:39:16 AM
I picked up my vent screens from the powder coater yesterday.  I also put just over 200 miles on the bike doing some errands.  Plan to ride over to Wheels Through Time with a few others today.

Hi Dave, Post a picture of the vented screens installed. Thanks so much.



Sent from my iPad using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: luca65 on October 07, 2017, 03:58:26 PM
Updated navigation maps 2018. Pay attention: Boombox software 1.21.3 is required. Version 1.21.2 has problems and the update of the navigation map will end in a loop "Software update... please wait...".
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on October 07, 2017, 10:57:28 PM
Vickie and I enjoyed a ride to Murphy, NC this afternoon. I tinkered with the FP3 and autotune on the trip. Worked great and Beauregard is running fine. 
Title: Re: What did you do to or on your CVO today?
Post by: OBB on October 08, 2017, 07:50:09 AM
Plugged  the tender to it. We're taking the car on vacation for the first time in 4 years. Figured I'd let it keep the battery charged while we're gone.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on October 08, 2017, 08:02:26 AM
Vickie and I enjoyed a ride to Murphy, NC this afternoon. I tinkered with the FP3 and autotune on the trip. Worked great and Beauregard is running fine.

Did you have good fall colors for your ride?  Went over the Cherohala Skyway and the Dragon Wednesday, very little color.  Yesterday we went over 441, Gatlinburg to Cherokee and the colors were pretty good, same on parkway to Maggie Valley.

Yesterday was a great day to ride.  May ride the bike to SMHD today to drop it off and have the apes put on.  Looks like bad weather for several days
Title: Re: What did you do to or on your CVO today?
Post by: TNCarters on October 08, 2017, 09:09:03 AM
Replaced the front fender damaged trailering to MV GTG.  Have to give thanks to Boardtracker HD.  Supplied a factory painted CVO fender at 20% discount delivered to my door one week after ordering.  Still don’t like trailering touring bikes.
Title: Re: What did you do to or on your CVO today?
Post by: Grizzly on October 08, 2017, 12:00:18 PM
Replaced the front fender damaged trailering to MV GTG.  Have to give thanks to Boardtracker HD.  Supplied a factory painted CVO fender at 20% discount delivered to my door one week after ordering.  Still don’t like trailering touring bikes.

I completely understand you not liking to trailer, but I'm wondering how you damaged your fender when doing so?  :nixweiss:

I use what I consider the best chock on the market https://wheeldock.com/products/wheeldock?variant=26294025411 and have never damaged a fender, "touch wood".  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Jock on October 08, 2017, 01:05:28 PM
Replaced the front fender damaged trailering to MV GTG.  Have to give thanks to Boardtracker HD.  Supplied a factory painted CVO fender at 20% discount delivered to my door one week after ordering.  Still don’t like trailering touring bikes.

Wow!  That's fast and well done.
Title: Re: What did you do to or on your CVO today?
Post by: TNCarters on October 08, 2017, 01:38:54 PM
Grizzly, my trailer is an open utility trailer which I had recently restained the floor. While loading the bike in the wet by myself my foot slipped out from under me just as I hit the top of ramp trailer floor and bike laid over against metal railing.  Not the best trailer for hauling a big bike and have since put non-slip coating on its floor.  Chock is a top of line Condor, but turn over occurred before I got the wheel in it.

Boardtracker quoted a 30 day lead time on the fender but shipped out three days after order. Pretty easy order, just supplied my VIN.
Title: Re: What did you do to or on your CVO today?
Post by: Grizzly on October 08, 2017, 02:56:29 PM
Glad to hear you got it all fixed up, and in great time too!
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on October 09, 2017, 09:13:22 AM
Did you have good fall colors for your ride?  Went over the Cherohala Skyway and the Dragon Wednesday, very little color.  Yesterday we went over 441, Gatlinburg to Cherokee and the colors were pretty good, same on parkway to Maggie Valley.

Yesterday was a great day to ride.  May ride the bike to SMHD today to drop it off and have the apes put on.  Looks like bad weather for several days

Really no fall colors to speak of anywhere along the route, Dave. This rain coming through will either get em started or knock them all off the trees.
Title: Re: What did you do to or on your CVO today?
Post by: Grizzly on October 09, 2017, 10:48:09 AM
It has been the same outcome here in Southern Ontario.

We were spoiled with hot, sunny and dry weather all through September and early October breaking records almost everyday!  Actually it is still going with temps well above the norm.

For a good display of fall colours the trees require a good amount of moisture and a decent frost, both of which we haven't had yet.

Well, I guess you can't have the best of both worlds, as the leaves are dropping before they change.

At least we've enjoyed lots of great riding weather.  I'll take that any day.  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: KGB on October 16, 2017, 07:00:31 PM
Installed The Ohlin's FKC 102 front fork cartridges today, ordered from Cycle Solutions and they came with the 3 special  tools you need from Ohlin, then went for a 40 mile ride, what a difference, just wish the HD772 rear shocks weren't back ordered, but should be here latter this month or 1st part of November.     
Title: Re: What did you do to or on your CVO today?
Post by: OBB on October 16, 2017, 07:12:39 PM
Installed The Ohlin's FKC 102 front fork cartridges today, ordered from Cycle Solutions and they came with the 3 special  tools you need from Ohlin, then went for a 40 mile ride, what a difference, just wish the HD772 rear shocks weren't back ordered, but should be here latter this month or 1st part of November.     
Must have been bored today. Thought you were doing that on Tuesday. lol
Title: Re: What did you do to or on your CVO today?
Post by: KGB on October 16, 2017, 07:32:28 PM
Must have been bored today. Thought you were doing that on Tuesday. lol

I actually started last night, until I found out I didn't have a 12mm hex socket, but couldn't find one local so I MacGyver a 12mm bolt to work as the tool  ;)
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on October 17, 2017, 07:35:21 PM
took it for a ride....and got a fng speeding ticket  :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: DesertHOG on October 17, 2017, 09:00:28 PM
took it for a ride....and got a fng speeding ticket  :nixweiss:

Think of it as a Performance Award. Won't hurt the wallet any less but maybe you'll get a chuckle going.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on October 18, 2017, 06:34:03 AM
Think of it as a Performance Award. Won't hurt the wallet any less but maybe you'll get a chuckle going.
  :D  :2vrolijk_21: :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: 110tHunDer on October 18, 2017, 08:44:52 AM
Well, you are fastfreddy.  :P
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on October 18, 2017, 09:25:50 AM
Well, you are fastfreddy.  :P

Now dats phuny rat dare..... ;D

He may need to change it to "justabitslowernowsinceIgotaticketanddontwantmyinsurancetogoupanymorefreddy".... ;D
Title: Re: What did you do to or on your CVO today?
Post by: 4fun on October 18, 2017, 09:48:34 AM
Now dats phuny rat dare..... ;D

He may need to change it to "justabitslowernowsinceIgotaticketanddontwantmyinsurancetogoupanymorefreddy".... ;D
Now that's funny

Sent from my SM-G930V using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: longlast on October 18, 2017, 01:08:13 PM
Had a great sunny country road ride

Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on October 18, 2017, 07:18:03 PM
took the hot rod out today...looking for a race, could not find that trooper tho. so no performance awards.  8)
Title: Re: What did you do to or on your CVO today?
Post by: Grizzly on October 19, 2017, 10:21:38 AM
Had a great sunny country road ride

Hey Longlast,

Did you do some tricky work with the colour of your picture you posted, or did you just fall in love with the colour of the '08 CVO Anniversary Ultra like me?

Just wondering,
Grizzly
Title: Re: What did you do to or on your CVO today?
Post by: 4fun on October 19, 2017, 07:26:35 PM
Finished the break in of the new motor. So far good.

Sent from my SM-G930V using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: longlast on October 20, 2017, 04:15:23 AM
Hey Longlast,

Did you do some tricky work with the colour of your picture you posted, or did you just fall in love with the colour of the '08 CVO Anniversary Ultra like me?

Just wondering,
Grizzly

When I was looking for a touring I was going to get a 103 Limited, but it didn't jump out at me. So I went outside to stand back and look at the bike through the window but it still wasn't jumping out.
As l was pondering I turned around and saw a row of bikes waiting to go into the shop so I went over to have a look and,....BANG,..... there it sat. It was LOVE at first site. I bought it that bay  ;D

And no tricky pic work, actually I don't think the pic does it justice. I was looking at it and I think I need to adjust the contrast on my phone camera.
Title: Re: What did you do to or on your CVO today?
Post by: pcpisano on October 20, 2017, 08:33:02 AM
I love it... please, where did you get that?


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: pcpisano on October 20, 2017, 08:35:24 AM
added a new timing cover...
I love it! Please, where did you get that?


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: michaelokielee@yahoo.com on November 01, 2017, 01:27:05 PM
Replaced the factory saddlebag speakers on my 13 RG CVO with the J&M Rokker 5x7 speakers. They sound great!! :orange:
Title: Re: What did you do to or on your CVO today?
Post by: acevtwin on November 02, 2017, 09:56:13 AM
Cleaned and covered it for the Winter. A Sad day here in Michigan.
Title: Re: What did you do to or on your CVO today?
Post by: 68 XLCH on November 04, 2017, 07:15:01 AM
Changed all oil, cleaned oil filter, cleaned and recharged air filter, and added fog lights.

Normally can ride one or maybe two days a week during winter.
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on November 05, 2017, 01:19:48 AM
Got the Harley Sena 20s EVO paired, up and running and made my first call ever on a motorcycle. Was playing with it so much my kids told me to stop calling them..
Title: Re: What did you do to or on your CVO today?
Post by: Powergod on November 05, 2017, 09:29:11 AM
Shined her all up for a long winters nap!
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on November 07, 2017, 10:05:58 AM
Shipped it to FL, sad day on this end, but hopefully makes it without issue in FL.
Title: Re: What did you do to or on your CVO today?
Post by: KGB on November 07, 2017, 07:11:57 PM
Installed the Ohlins HD772 rear shocks today, what a difference! wished I would have done this 17,000 miles ago
Title: Re: What did you do to or on your CVO today?
Post by: OBB on November 07, 2017, 07:29:07 PM
Shipped it to FL, sad day on this end, but hopefully makes it without issue in FL.
Did I miss something? Did you sell it and get a new one?
Title: Re: What did you do to or on your CVO today?
Post by: Powergod on November 08, 2017, 07:24:36 AM
Installed the Ohlins HD772 rear shocks today, what a difference! wished I would have done this 17,000 miles ago

What did that run you?
Title: Re: What did you do to or on your CVO today?
Post by: KGB on November 08, 2017, 09:05:32 AM
What did that run you?

I got the HD772's from Computrack Boston for $765.00, I tried to buy the FKC102 Fork Cartridges from them, but they will only sell them to you if you send in your forks and they do the install, so I bought them from Cycle Solutions for $925.00 and they include 2 quarts of the Ohlins fork oil and the 3 special tools you will need to install them.

Both show higher prices on there website but have a "make an offer button" or "email us for our best price"

I know its a lot of money, but IMO its worth it, to bad Moco doesn't include them on the CVO's (like some of the other brands) then the high price of our motorcycles might be worth it.  :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on November 08, 2017, 09:06:39 AM
Did I miss something? Did you sell it and get a new one?

Moving to SWFL for the winter, we are building a house and wanted to ride through the winter.
Title: Re: What did you do to or on your CVO today?
Post by: King Glide on November 08, 2017, 04:59:08 PM
Finished the install of my whim and had the dealer do the flash. Now that’s freedom!
Title: Re: What did you do to or on your CVO today?
Post by: OBB on November 08, 2017, 08:43:33 PM
Moving to SWFL for the winter, we are building a house and wanted to ride through the winter.
Good deal. Sounds like a great plan.  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Powergod on November 11, 2017, 06:39:49 PM
Good deal. Sounds like a great plan.  :2vrolijk_21:

I concur wish I had that option
Title: Re: What did you do to or on your CVO today?
Post by: Jock on November 11, 2017, 07:18:32 PM
Cleaned it !
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on November 12, 2017, 07:11:00 AM
Yesterday I install a hard mount plug for my Gerbing Heated Gear.  Put in on the left side mid frame heat deflector.  Nice, neat and out of the way.  Barley noticeable when not in use.  I also installed hand guards to protect my hands from the wind due to having apes and no heated grips.  They look pretty good, and do help.  Then I rode for a little bit yesterday, 45 degrees out when I started out.

Title: Re: What did you do to or on your CVO today?
Post by: Powergod on November 12, 2017, 08:05:27 AM
First I have seen of knuckle busters on a touring bike, is that going to be year round for you or cold temp only?
Title: Re: What did you do to or on your CVO today?
Post by: kevin_n on November 12, 2017, 02:29:44 PM
Put the cover on it for the winter.  :-\
Title: Re: What did you do to or on your CVO today?
Post by: YELLOWBIRD on November 12, 2017, 07:42:45 PM
First I have seen of knuckle busters on a touring bike, is that going to be year round for you or cold temp only?


They are very nice to have on. I have had mine on my rig for about 4 years now.

Of course in the fastest color matched fashion.  :bananarock:



YB
Title: Re: What did you do to or on your CVO today?
Post by: CVO 2015 on November 12, 2017, 08:11:15 PM
Switchd Pipes from a MGS to a Fullsach and added a 58 mm t.b. Dyno sheet went from 100/116 to 110.34 /114.05.   I have the SE 585 cam.   Later on down the road I will either add headwork and bring compression up to 10.5:1 or add a SE 117 kit and replace cams with TTS 150...
Title: Re: What did you do to or on your CVO today?
Post by: 09nessrg on November 12, 2017, 08:25:56 PM
Yellowbird, very nice on the hand guards, what is the manufactures name of yours?
Title: Re: What did you do to or on your CVO today?
Post by: YELLOWBIRD on November 12, 2017, 09:19:55 PM
Yellowbird, very nice on the hand guards, what is the manufactures name of yours?




Thanks!

Greatbikergear.com is where I got mine. They use to come in chrome or black when I first got mine. The inside has a black diamond plate type sticker on them. (At least they use to.)

They give you a forum discount too if your on the HDForum.

BTW, I have never taken them off since I got them! Big Azz bugs, rocks, etc., don't hurt my hands anymore!



YB







Title: Re: What did you do to or on your CVO today?
Post by: CVODON on November 13, 2017, 12:04:45 PM
Is there no way your switch housing will cover that weld/reducer on handle bars? What brand are these bars?
Thanks
Title: Re: What did you do to or on your CVO today?
Post by: YELLOWBIRD on November 13, 2017, 06:56:26 PM
Is there no way your switch housing will cover that weld/reducer on handle bars? What brand are these bars?
Thanks


Don,

I'm assuming you are talking bout my bars.

I too thought the same regarding butting the switch housing all the way to the larger portion of the handle bars. No can do!

Btw, they are stock 2013 CVO Road Glide bars painted to match my Rig.


YB
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on November 14, 2017, 08:04:25 AM
First I have seen of knuckle busters on a touring bike, is that going to be year round for you or cold temp only?

When I bought them from JD customs & fabrication the plan was to only use them in the winter months.  However I am thinking now they may stay on the bike year round.  I have had lots of positive comments on them, and I also think they look pretty good. 

Put the cover on it for the winter.  :-\

No way.  Winter can be a very nice time of year to ride.  As long as no salt or snow on the road, I ride.  You just have to have the right gear, and then its more comfortable then a 95 degree day.
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on November 14, 2017, 09:00:20 AM
Winter can be a very nice time of year to ride.  As long as no salt or snow on the road, I ride.  You just have to have the right gear, and then its more comfortable then a 95 degree day.

You get a big AMEN from me on that, Dave.  Preach on, brother... :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: BigLew on November 14, 2017, 10:03:40 AM
Put the cover on it for the winter.  :-\
Dude you guys need to move further south!

BigLew
Title: Re: What did you do to or on your CVO today?
Post by: acevtwin on November 14, 2017, 02:53:04 PM
Dude you guys need to move further south!

BigLew
Agreed!
Title: Re: What did you do to or on your CVO today?
Post by: 4fun on November 21, 2017, 11:07:01 PM
Went for a chilly but invigorating 3 hour ride!
Title: Re: What did you do to or on your CVO today?
Post by: kevin_n on November 22, 2017, 08:22:44 PM
Dude you guys need to move further south!

BigLew

Kathy wants to move farther south, I wanna move farther west. Colorado area I would love to go to. Just another reason we bought the trailer this year. To hopefully take a week in the middle of winter and go somewhere warm with the bikes.
Title: Re: What did you do to or on your CVO today?
Post by: DesertHOG on November 26, 2017, 02:53:36 PM
Kathy wants to move farther south, I wanna move farther west. Colorado area I would love to go to. Just another reason we bought the trailer this year. To hopefully take a week in the middle of winter and go somewhere warm with the bikes.

Colorado is great in the summer for motorcycling but just as crappy as any other Winterland state otherwise. Unless you love downhill or cross country skiing, snowmobiles or ice fishing, skip Colorado during the winter.
Title: Re: What did you do to or on your CVO today?
Post by: muddypaws on November 26, 2017, 06:17:03 PM
Great ride for lunch. Nice by noon but in the low 30's in the morning. Season almost over..
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on November 30, 2017, 07:34:37 AM
Rode my 18 CVO Road Glide over to Smokey Mountain HD to get its 5K service done.  A brisk 40 degrees on the way over and a beautiful 64 degrees on the way home.
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on December 01, 2017, 04:39:50 PM
 left it at the chevy dealer  :huepfenjump3: ...
Title: Re: What did you do to or on your CVO today?
Post by: kevin_n on December 01, 2017, 09:36:04 PM
left it at the chevy dealer  :huepfenjump3: ...

They could probably do better at fixing it.  :P what did you get?
Title: Re: What did you do to or on your CVO today?
Post by: OBB on December 01, 2017, 09:40:39 PM
left it at the chevy dealer  :huepfenjump3: ...
You get another "go fast" toy?
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on December 02, 2017, 01:03:30 AM
You get another "go fast" toy?
na, got me a close out 17 silverado LTZ
Title: Re: What did you do to or on your CVO today?
Post by: OBB on December 02, 2017, 06:11:59 AM
na, got me a close out 17 silverado LTZ
Nice truck. I got a blue '16 I picked up almost 2 years ago. z71/LTZ package together. Lots of goodies.
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on December 02, 2017, 10:43:18 AM
Nice truck. I got a blue '16 I picked up almost 2 years ago. z71/LTZ package together. Lots of goodies.
yup mine is a double Z also, and charcoal to match the bike ... infotainment over load again!
Title: Re: What did you do to or on your CVO today?
Post by: OBB on December 02, 2017, 12:13:01 PM
yup mine is a double Z also, and charcoal to match the bike ... infotainment over load again!
If you think the Infotainment system on the Rushmore is a pain, wait till you dig through all that. I love the memory features for the keys though instead of hitting the buttons on the doors. That could weather remote start kicks ass too. Under a certain temp it turns on both defrosters and the heated seat.

Sent from my XT1254 using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: bigC on December 02, 2017, 06:31:25 PM
Decide to go out for a 200+ mile lunch ride. It was mid 30's when we left this morning and mid 50's when we returned. Great day of riding! Also the BBQ wasn't bad either.
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on December 03, 2017, 07:23:18 AM
Picked up the bike at Six Bends in Fort Myers and took a nice ride mid-day ride.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on December 25, 2017, 07:11:29 AM
Well I finally got the Fullsac MX head pipe installed on my 18 CVO Road Glide.  Also down loaded the correct Map from TTS.  Bike already had the 2.25 fullsac cores and tech mat.  Still have the heavy breather to install, but ran out of time yesterday.

The fit of the fullsac pipe is great, heat shields line up better than stock.  Pipe mounting is nice, as is the new cross over and the mounting set up for the crossover.

Title: Re: What did you do to or on your CVO today?
Post by: yobtaf103 on December 25, 2017, 07:45:54 AM
Nice set up, GMR got good results with the same
Title: Re: What did you do to or on your CVO today?
Post by: groupw on December 25, 2017, 12:16:23 PM
....... ... skip Colorado during the winter.

.......... bull___t   ;)
(http://i64.tinypic.com/2wbs5lt.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on December 25, 2017, 03:35:13 PM
I got my Kury plate frame installed finally.
Title: Re: What did you do to or on your CVO today?
Post by: motor1 on December 25, 2017, 11:49:18 PM
Technically not done today, (got em for Christmas), will put them on tomorrow.
Title: Gave Lucille a new parking pad....
Post by: zigzag930 on December 26, 2017, 03:44:05 PM
Now I want to do the entire garage floor!
Title: Re: What did you do to or on your CVO today?
Post by: Swbike on December 26, 2017, 06:32:10 PM
I installed custom dynamics fairing turn signal- running lights. They look great and very bright!
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on December 27, 2017, 09:33:26 AM
I went for a very nice 292 mile ride yesterday.  All up through the Cumberland Plateau, even got to see a little snow.  Tested out the Fullsac MX head pipe, it does per the butt dyno add power to the bike.  Runs smooth. 

Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on December 28, 2017, 08:03:57 AM
Well I put another 204 miles on the bike yesterday.  It was a nice sunny winter day.  35 degrees when I left the house at 1145.  Was not thinking it would get colder,  I was wrong.  I miss having lowers for the winter months.

Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on December 28, 2017, 09:01:38 AM
It was a balmy 14 riding into work this morning, Dave... :rolleyes4: :goofy: :zstupid:
Title: Re: What did you do to or on your CVO today?
Post by: KGB on December 28, 2017, 09:09:23 AM
Almost to cold to be on the Forum  :huepfenlol2:
Title: Re: What did you do to or on your CVO today?
Post by: JCZ on December 28, 2017, 09:49:57 AM
Almost to cold to be on the Forum  :huepfenlol2:

Naw........


Title: Re: What did you do to or on your CVO today?
Post by: JCZ on December 28, 2017, 09:50:46 AM
.......
Title: Re: What did you do to or on your CVO today?
Post by: JCZ on December 28, 2017, 09:51:37 AM
.......
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on December 28, 2017, 10:20:39 AM
.......

That one looks like a load of fun, JC.  I hit the white stuff in April riding into Flagstaff a few years ago....bike looked just like that when I pulled into the motel.  Beautiful but glad I made it in before it really came down.  Came across Newfound Gap (again in April....maybe the Lord is telling me something...) from the Spring Cherokee rally a few years ago with 6" of the white stuff on the ground and falling.  They closed the roads behind me when I hit Sugarlands visitor center as I was the last one through with the Ranger right behind me.  Took me 4 hours to get home (normal is around 2.5)....ah, the younger days.... ;D
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on December 29, 2017, 08:31:32 AM
I have rode in plenty of cold.  Snow like JCZ, well no.  Seems that would be very nerve racking.

Put 135 miles on the bike yesterday.  Road over to the Sweetwater Valley Cheese farm to get some good cheese, then up to Smokey Mountain Harley to have some warranty work done, and get the bike washed, as 30 degrees is to cold for me to wash the bike.
Title: Re: What did you do to or on your CVO today?
Post by: see vee oh on December 29, 2017, 01:53:19 PM
Added a FuelMoto Jackpot header, Rinehart 4" Slip Ons and a dyno tune to my 2018 Gunship CVO Street Glide.

Pre Install Dyno: 88.34 HP 104.54 TQ
Post Dyno: 97.38 HP and 120.23 TQ

Awesome torque over 100 ftlb from idle to 5K RMP. Very pleased!
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on December 30, 2017, 08:31:19 AM
Well a good friend made me some vent screens and I had them powder coated.  So I installed them yesterday.  They look good. 
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on December 30, 2017, 08:32:57 AM
I also got my heavy breather installed.  The canned map is pretty good, but going to have it properly dyno tuned as I am sure there is more.

Title: Re: What did you do to or on your CVO today?
Post by: CVO Ries on January 01, 2018, 07:45:36 PM
I modified a $42 curved license plate frame made for a non-CVO bike and made it work on my CVO.  I was a piece of cake.  I just removed the existing tab/mount with a cut-off tool, painted the edge to postpone rust and used some longer bolts.  I didn't modify the bike at all.  There are several that love the Paul Yaffe version of this, but I have no problem with the existing light. 
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on January 01, 2018, 08:44:41 PM
I also got my heavy breather installed.  The canned map is pretty good, but going to have it properly dyno tuned as I am sure there is more.
That looks really good Dave!
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on January 02, 2018, 06:16:44 AM
Went for the New Years day frosty toes ride.  Did 61 mile lunch ride with my club.  19 Degrees was the high.
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on January 02, 2018, 07:21:49 AM
Went for the New Years day frosty toes ride.  Did 61 mile lunch ride with my club.  19 Degrees was the high.

Was that the group at Swiftys in Oak Ridge yesterday, Dave?
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on January 02, 2018, 11:56:20 AM
Went for a cool ride yesterday it was 33 when I left the house. Every new years day (roads permitting) I go for my first ride of the year to this little mom and pop bar on the Pilchuck river in Machias and watch their "Polar Bear Club" jump in the river at high noon! I think it got up to a balmy 35 degrees by then. It's quite the show. Went for lunch and  a nice loop after that. Thank goodness for Gerbing!!
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on January 02, 2018, 07:54:44 PM
Ordered Monkey Bars for the new scoot today!
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on January 02, 2018, 08:26:23 PM
Was that the group at Swiftys in Oak Ridge yesterday, Dave?
No we went South out of Ten Mile, then up to Athens for our Lunch stop.
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on January 03, 2018, 06:49:53 AM
No we went South out of Ten Mile, then up to Athens for our Lunch stop.

Good deal.

The Oak Ridge group musta been from the Frosty toes group out of the Clinton Hwy. store
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on January 03, 2018, 09:43:40 PM
Installed a hk radio on my old 04 seeg.  The stock radio died.  Really had a good time working on the old cvo. I remembered I saw and old thread here that Twolanerider did this on his 05.  A friend had one in the garage after doing an upgrade.   So I got this for cheap.  Only $100.00.
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on January 03, 2018, 09:47:15 PM
Then I added an amp and new speakers.  This Rockford amp really does the job well.   Lots of clear power and doesn't take up very much room at all.    Very easy install.
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on January 03, 2018, 09:49:16 PM
And speakers. I miss this bike.   Runs amazing still.  Yeah that John Sachs sure can build a hell of a motor. 80k miles and better than ever. :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: CVO 2015 on January 03, 2018, 11:56:25 PM
1550 mile trip through Death Valley, St. George Utah, N. and S. rim of the Grand Canyon, and Williams Az. back to Cali..

Sent from my SM-G955U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: Yellow09SERG on January 04, 2018, 01:28:28 PM
Walked by it and whined to myself about how cold it is on the way to start my truck
Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on January 04, 2018, 02:30:06 PM
Added the Oberon levers. What a difference being able to set the release point on the clutch. Oberon is a quality product. Sure be nice if they made them to fit my Skunk as well.
Title: Re: What did you do to or on your CVO today?
Post by: CHH_Badkarma on January 07, 2018, 02:01:29 AM
Picked the breakout up from the dealership after a service interval and having them put on an oil pressure gauge.  Got home to notice the gauge pressure line was contacting the front pipe and the clear sleeve over the braided line was melting. So hard to get good help these days. I suppose I should have inspected the work closer. Lesson learned.
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on January 07, 2018, 03:29:12 PM
Picked the breakout up from the dealership after a service interval and having them put on an oil pressure gauge.  Got home to notice the gauge pressure line was contacting the front pipe and the clear sleeve over the braided line was melting. So hard to get good help these days. I suppose I should have inspected the work closer. Lesson learned.
Sounds like a trip back to the dealership for a new line... mistakes happen (unfortunately) :(... now they have to do the right thing.. and that means replacing the line and not trying to fix/Band-Aid it.

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: CHH_Badkarma on January 07, 2018, 03:47:38 PM
Indeed.
Chit happens sometimes. They said they would make it right so I'm not to bent out of shape. Have to work all week anyway so it won't cut into my riding any
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on January 09, 2018, 08:15:22 AM
Well yesterday trailered my Bike in the Freezing rain to Mohawk TN to have it tuned.  Man I hate trailering.  Tune is done and plan to ride the bike home today.  It sure has a pretty nice torque curve for just a high quality fullsac exhaust and tune.  The dyno graph is posted in the Intake/Exhaust section. 
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on January 09, 2018, 07:34:47 PM
Added the Full..sac treatment, again! MX pipe, 2.0" power cores, techmat blankets and TTS Mastertuner :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on January 10, 2018, 07:24:35 AM
Rode the bike 125 miles home from the tuner.  Very good throttle response.  Good roll on power from idle to 5000 rpm.  Cruising interstate at 3000 rpm, roll on is great, no down shift to pass in a hurry.  Then in the twisty curves roads, its a blast, great usable power, easy to ride.

Going to go ride her again today.
Title: Re: What did you do to or on your CVO today?
Post by: longlast on January 10, 2018, 10:26:48 AM
Rode in the rain today got the bike nice and dirty . Got to wait for a dry day now to clean it instead of riding it  :(
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on January 11, 2018, 07:57:50 AM
Did a nice 250 mile ride through the hills of East TN with Friends.  Nicest day so far this year for a ride.  Had a good time.  When I got home this was in the mail box.  Been waiting on it since October.
Title: Re: What did you do to or on your CVO today?
Post by: DesertHOG on January 11, 2018, 09:09:04 AM
Did a nice 250 mile ride through the hills of East TN with Friends.  Nicest day so far this year for a ride.  Had a good time.  When I got home this was in the mail box.  Been waiting on it since October.

Congrats, Is this your first official SS1000?
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on January 11, 2018, 12:24:15 PM
Way to go Dave!
Title: Re: What did you do to or on your CVO today?
Post by: Grizzly on January 11, 2018, 04:11:23 PM
Congratulations Dave!

Nothing like putting an "!" on it and going the extra 500 miles!

Good for you!  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: hrdtail78 on January 11, 2018, 05:29:45 PM
Added the Oberon levers. What a difference being able to set the release point on the clutch. Oberon is a quality product. Sure be nice if they made them to fit my Skunk as well.

I put skunk controls on my 09.  There is one clutch lever.  Been also waiting for Oberon.

What have I done?  Changed the fairing to roadglide, inverted front end, carbon wheels, new swingarm, and a paint job.
Title: Re: What did you do to or on your CVO today?
Post by: Joe J on January 14, 2018, 06:08:14 PM
Installed a set of 12" FBI bars.
Title: Re: What did you do to or on your CVO today?
Post by: Scott7d on January 16, 2018, 01:48:41 PM
Got my custom license plate installed to go along with my Big Red theme, bike's nickname. Big Red was taken, so had to settle for "BG RED".

(https://s17.postimg.org/jit3nulcf/plate.jpg)

(https://s17.postimg.org/p6zeeqxen/timing.jpg)

(https://s17.postimg.org/ab0v756kf/derby.jpg)

(https://s17.postimg.org/rob5lzu5r/badges.jpg)

(https://s17.postimg.org/4mukg9pdb/seat.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: pudgeyxj on January 16, 2018, 02:34:55 PM
Very nice!! What kind of fans are those at the horn cover?


Paul
Title: Re: What did you do to or on your CVO today?
Post by: Scott7d on January 16, 2018, 04:20:20 PM
Thanks! Those are the love jugs mighty mite fans. I painted them granite to blend in with the motor better. Really help keep the heads cool at slower/stopped situations. Here's a full look.

(https://preview.ibb.co/i5ZRBm/IMG_20171022_153419100_HDR.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: pudgeyxj on January 16, 2018, 05:14:59 PM
Excellent, thanks. Think'n I'm gunna look into those


Cheers from Canadia  :drink:
Title: Re: What did you do to or on your CVO today?
Post by: Rooster on January 16, 2018, 07:30:20 PM
Looks good. They look a little larger diameter than the Wards units.
Title: Re: What did you do to or on your CVO today?
Post by: Scott7d on January 16, 2018, 08:42:59 PM
I wanted those originally because they sold a granite unit. But they were out of business. I bought these and found a nickel paint almost identical to the motor color. I actually don't care for how they look, and they especially stood out when they were chrome. After I painted them, they weren't such an eye sore.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on January 17, 2018, 08:38:36 AM
Your bike is looking very sharp Scott.
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on January 19, 2018, 10:48:00 AM
Got the Monkey bars installed! I'll get some photos when the rain stops.....in June    lol
Title: Re: What did you do to or on your CVO today?
Post by: cmashark on January 20, 2018, 03:33:54 AM
Pulled the exhaust and air cleaner off so I can tackle a cam swap in the morning.  Wondering if I should have ordered a different a/c instead of sticking with the heavy breather.
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on January 20, 2018, 10:25:51 AM
Pulled the exhaust and air cleaner off so I can tackle a cam swap in the morning.  Wondering if I should have ordered a different a/c instead of sticking with the heavy breather.
from what i have read and heard the HB is going to be your best performer, i would keep it if your wanting a hot rod
Title: Re: What did you do to or on your CVO today?
Post by: Billy on January 20, 2018, 01:06:01 PM
I love that color. I wish they would use it on a CVO Rk               Billy
Title: Re: What did you do to or on your CVO today?
Post by: JCZ on January 20, 2018, 08:29:26 PM
I moved my RV from Tampa to Umatilla, Fl.  Then I went for a ride.....in my t-shirt sleeves!  It was still 69F at 7:00 p.m.  :bananarock:
Title: Re: What did you do to or on your CVO today?
Post by: SIKBIRD on January 20, 2018, 10:49:34 PM
Replaced the motor mount, fuel door hinge, and added some Christmas Chrome (oil filler spout and oil vent line)
Title: Re: What did you do to or on your CVO today?
Post by: davidw221 on January 22, 2018, 03:44:32 PM
Two different fans:

Title: Re: What did you do to or on your CVO today?
Post by: CHH_Badkarma on January 22, 2018, 04:13:05 PM
Had a talk with the dealer about the replacement fender they recived for my breakout (replacement for the known rust issue). It had several chips along both left and right sides on the bottom edge. Looks like it was placed on a rack after painting and that wrecked the clear coat.

So yet another rear fender is being put on order. We will see what this next one looks like in 30 days or so
Title: Re: What did you do to or on your CVO today?
Post by: MGB on February 10, 2018, 09:21:05 AM
Changed the fuel filter.
Title: Re: What did you do to or on your CVO today?
Post by: HUBBARD on February 10, 2018, 01:33:27 PM
Walked by the Ol' Girl in the garage this morning, and said, "Maybelle, git your chit together.  You've been up on that jack since October, and we're leaving the 9th, going to Daytona!"  She never said a word, but I know she heard me.  Later--HUBBARD
Title: Re: What did you do to or on your CVO today?
Post by: Aussie on February 10, 2018, 04:03:13 PM
Two different fans:

The horn cover with fan looks like a nice touch, where did you get it from.
What about your horn, did you remove it.
Title: Re: What did you do to or on your CVO today?
Post by: TNCarters on February 11, 2018, 04:24:19 PM
Recently detached the tour pak on my 2015 RGU.  Got tired of hauling about 65 lbs around all the time when I’m riding in town and day rides.  Just used individual parts from the kit except no bag signals since my 2015 already had fender signals.  Have not changed out the big touring seat yet.   
Title: Re: What did you do to or on your CVO today?
Post by: PFWiz on February 14, 2018, 12:24:17 PM
I ordered a Clearview Shields wind shield for her. It is officially the first new part for my bike!
Title: Re: What did you do to or on your CVO today?
Post by: Aussie on February 17, 2018, 07:03:34 AM
Replaced the SE lifters with S&S Premium Lifters
Title: Re: What did you do to or on your CVO today?
Post by: Indenial on February 18, 2018, 07:29:47 PM
Just had a new rear drive belt and sprockets replaced. 85,000 miles on it and don't want a problem in the middle of no where on a trip. Preventive maintenance.  Then it's on the hoist for the annual Glare coating and cleanup.
Title: Re: What did you do to or on your CVO today?
Post by: JCZ on February 18, 2018, 08:22:31 PM
Went for a ride....or course!  It's in the Ride Report board.   :huepfenlol2:
Title: Re: What did you do to or on your CVO today?
Post by: bigC on February 18, 2018, 10:43:03 PM
Went for a ride....or course!  It's in the Ride Report board.   :huepfenlol2:


I agree, I rode today like I stole it! Because I feel like I stole a day back from Ole Man Winter this time of year around here :orange:
Title: Re: What did you do to or on your CVO today?
Post by: YELLOWBIRD on February 20, 2018, 07:53:56 AM

One of my local dealers has a annual "Discount Run" from one of their Dealerships to one of their other Two locations. I ended up getting 67.5% discount. (Max $500.00 off)

Ended up getting a new rear Dunlop American Elite, Chrome TB cover, Heavy Breather short filter kit, Screamin' Eagle hat and HD Leather button up shirt for Mama.

Total cost out of pocket minus $70.00 gift card, $244.36!!!

Bonus: two sub sandwiches, chips and a killer big cookie!



 :bananarock:


YB

Title: Re: What did you do to or on your CVO today?
Post by: Capt.D on February 20, 2018, 02:59:10 PM
Dropped my Breakout off to have the 117 kit installed....

Sent from my SM-N950U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: 4fun on February 20, 2018, 09:39:24 PM
Installed the Legend Revo-A's on the rear and the Axeo's in the front. Just need some nice weather to try them out.

Sent from my SM-G930V using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: groupw on February 22, 2018, 02:18:38 PM
......... i feel like such a lite weight  :huepfenjump3: mentioning that i just got the AirWing light mounted up
(http://i68.tinypic.com/2iurwhv.jpg)
...... i'm waiting for the lifters to go (under the ESP) before upping to a 117
Title: Re: What did you do to or on your CVO today?
Post by: CVO 2015 on February 22, 2018, 05:37:53 PM
How much time do you have before ESP expires?

Sent from my SM-G955U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on March 08, 2018, 05:01:35 AM
Had the 10k service done and a new rear tire on my 2018 CVO Street Glide. Leaving for Daytona.

Sent from my SM-N950U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: PFWiz on March 08, 2018, 12:17:35 PM
I went to the dealer yesterday and test fit and then installed my Clearview Windshield. It is the very first (though not the last) mod I have made to the bike!
Title: Re: What did you do to or on your CVO today?
Post by: grandpadoc on March 08, 2018, 09:09:11 PM
Installed DayMakers on my 00, but kept the clear headlight lens.
Title: Re: What did you do to or on your CVO today?
Post by: wtfdskin on March 08, 2018, 09:46:19 PM
LA Choppers 10" Twin Peaks, Rocker Lockers, S&S Premium Lifters, Inner Cam Bearings
Title: Re: What did you do to or on your CVO today?
Post by: busarealfast on March 09, 2018, 03:15:22 PM
Cleaned her up for the daytona ride tomorrow.
Title: Re: What did you do to or on your CVO today?
Post by: bensonjv on March 09, 2018, 08:33:54 PM
Traded it in on a new one.
Title: Re: What did you do to or on your CVO today?
Post by: CoachMose on March 09, 2018, 11:54:48 PM
Traded it in on a new one.

Congrats on the new one. I have been following your story. I just traded my '16 for a gunship gray streetglide. Still waiting on it. A dealer trade as well. Should arrive next week. I went ahead with the Stage IV. I have a dyno guy from an HD shop about 50 minutes away telling me that he can exceed what has been posted about the setup even with the SE tuner. I didn't buy from that dealer, but they have always done my motor work as my dealer who I now have bought 4 bikes from doesn't have a dyno.

Enjoy the new ride. Excited to hear your thoughts on it.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on March 14, 2018, 08:48:00 AM
Rode home from Daytona on the 18 CVO Road glide yesterday.  Beautiful but cool day for a ride back roads from Jacksonville FL to hone in TN, lots of good curves in North GA and TN.
Title: Re: What did you do to or on your CVO today?
Post by: acevtwin on March 14, 2018, 10:15:53 AM
I had my seat hold down nuts powder coated Black. When running just a solo seat all I could ever see was the 2 Silver thumb screws standing out under my seat. I think this will be much less noticeable.
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on March 14, 2018, 12:50:11 PM
Finally remembered to take and then post a pic of my new bike in the sunshine. A record breaking temperature here in the Seattle area on Monday. It was over 70 degrees. This pic was taken from a little hilltop park in Anacortes Wa. the home of the annual Oyster Run which is supposedly the largest 1 day bike rally in the nation. The rally use to be an actual run that started in Marysville where I live and made several predestined stops along the way to downtown Anacortes until it just got way too big to organize as a "run". They shut down main street for the one day of the year for the event. The rally takes place on the last Sunday in September every year.







Title: Re: What did you do to or on your CVO today?
Post by: PFWiz on March 16, 2018, 09:57:37 AM
Told my dealer to go ahead with my <60 days mods. (I closed on the bike on 2/1/18.) Dropped a hard copy list just make sure there is no miscommunication. They will order all of their stuff and all that leaves is getting my rebuilt Ohlin 3-3s back from Howard.
Title: Re: What did you do to or on your CVO today?
Post by: andrejak on March 16, 2018, 05:27:15 PM
Finally remembered to take and then post a pic of my new bike in the sunshine. A record breaking temperature here in the Seattle area on Monday. It was over 70 degrees. This pic was taken from a little hilltop park in Anacortes Wa. the home of the annual Oyster Run which is supposedly the largest 1 day bike rally in the nation. The rally use to be an actual run that started in Marysville where I live and made several predestined stops along the way to downtown Anacortes until it just got way too big to organize as a "run". They shut down main street for the one day of the year for the event. The rally takes place on the last Sunday in September every year.

I like the color.  Ride safe and enjoy
Title: Re: What did you do to or on your CVO today?
Post by: Ballz on March 22, 2018, 12:47:51 AM
Just ordered 14" apes for my 2014 Breakout CVO
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on March 22, 2018, 02:53:24 PM
Those bars look pretty bad ass! Who makes those? Be sure to post a pic when you get them installed.
Title: Re: What did you do to or on your CVO today?
Post by: Swbike on March 23, 2018, 08:15:58 PM
I did nothing to it. If it ain't broke don't fix it!
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on March 24, 2018, 12:03:36 AM
Rode that bitch.  The new (old) one.  Replaced the carb and a petcock on the new-to-me old FXR2, dialed in a few other small things and finally got to ride it some.  Four hours and 200+ miles later we were home and the bike and I had bonded.   :drink:
Title: Re: What did you do to or on your CVO today?
Post by: longlast on March 24, 2018, 10:45:33 AM
It's taken a bit but finally got a oil temperature gauge installed. Made the mount from 1.3mm stainless.
15 minutes of idle oil temp 80 Celsius 176f  pressure 10/12 psi air temperature 60f.
Haven't gone for a ride yet not a nice day.
Title: Re: What did you do to or on your CVO today?
Post by: Bav on March 24, 2018, 01:38:52 PM

Haven't gone for a ride yet not a nice day.

It has been a horrible day here in the U.K. but went on a 120 mile new Road Captain assessment ride. It rained most of the day and my bike is now filthy!! Waste of time cleaning it yesterday!



Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: RoadMonkey on March 25, 2018, 03:06:04 PM
(http://)the stock bars from a 2017 Road King special will fit directly on a 2013 CVO Road King. Love it, just saying.. Much happier than the ones I first put on.
Title: Re: What did you do to or on your CVO today?
Post by: Capt.D on March 27, 2018, 11:42:59 PM
I bought it.....(https://uploads.tapatalk-cdn.com/20180328/545c9bb70684eb3d5b32ef1ef33fabbb.jpg)(https://uploads.tapatalk-cdn.com/20180328/b2da9a5a80ee3f8c8be2be572e166cff.jpg)(https://uploads.tapatalk-cdn.com/20180328/6bf03754b0e7c6f07f42cf12f4a7b44a.jpg)(https://uploads.tapatalk-cdn.com/20180328/534d6737e4c493521670e49f2ac5137b.jpg)

Sent from my SM-N950U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: CVO 2015 on March 28, 2018, 12:40:22 AM
I bought it.....(https://uploads.tapatalk-cdn.com/20180328/545c9bb70684eb3d5b32ef1ef33fabbb.jpg)(https://uploads.tapatalk-cdn.com/20180328/b2da9a5a80ee3f8c8be2be572e166cff.jpg)(https://uploads.tapatalk-cdn.com/20180328/6bf03754b0e7c6f07f42cf12f4a7b44a.jpg)(https://uploads.tapatalk-cdn.com/20180328/534d6737e4c493521670e49f2ac5137b.jpg)

Sent from my SM-N950U using Tapatalk
GREAT CHOICE!

Sent from my SM-G955U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: PaulLavery on March 28, 2018, 04:14:34 AM
Paid for it whilst it was being delivered, happy days !
Title: Re: What did you do to or on your CVO today?
Post by: grim on March 28, 2018, 02:04:10 PM
Mounted my Garmin. Was hesitant about cluttering dash but now I can see it without taking my eyes off the road. 
Title: Re: What did you do to or on your CVO today?
Post by: grim on March 28, 2018, 02:05:24 PM
Bracket
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on March 28, 2018, 02:14:32 PM
Mounted my Garmin. Was hesitant about cluttering dash but now I can see it without taking my eyes off the road.

Now we can see it without standing on our head..... ;D  :nervous: :huepfenlol2: :bananarock:

Very nice and clean install, by the way.... :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Grizzly on March 28, 2018, 05:37:23 PM
Hey Grim,

Nice new ride and very nice install on the GPS.  :2vrolijk_21:

I think your hand must have slipped when you inserted your Country code.  ::)
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on March 28, 2018, 05:53:08 PM
I bought it....

The best bike in the best color! Of course I may be a little biased. You're gonna love it, great choice.
Title: Re: What did you do to or on your CVO today?
Post by: JCZ on March 28, 2018, 07:54:15 PM
I rode out to Boone Hall Plantation.....ride report to follow soon....

(https://farm1.staticflickr.com/791/40370600704_3c9b333ac6_b.jpg)

(https://farm1.staticflickr.com/887/39270942210_d9f5107d62_b.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: Jock on March 28, 2018, 07:55:47 PM
I rode out to Boone Hall Plantation.....ride report to follow soon....

(https://farm1.staticflickr.com/791/40370600704_3c9b333ac6_b.jpg)

(https://farm1.staticflickr.com/887/39270942210_d9f5107d62_b.jpg)

Atta Boy!
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on March 29, 2018, 08:26:59 AM
I rode out to Boone Hall Plantation.....ride report to follow soon....

(https://farm1.staticflickr.com/791/40370600704_3c9b333ac6_b.jpg)


I was stationed in Charleston SC for 6 years.  Love that area, and would still be there if the base had not closed.  Had to sell my home and transfer to a new base.

Great pictures.  Many cool plantations in that area.  Enjoyed visiting them.  Lots of history.
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on March 29, 2018, 08:35:37 AM
Dad and step mom lives in Summerville....just "down the street" from Uncle Mikey....who lives within spittin distance to Middleton Place plantation...another spot you need to visit, JC.

Like Dave said, it's a beautiful but expensive area of the country to live.  Enjoy your visit to the Low Country
Title: Re: What did you do to or on your CVO today?
Post by: JCZ on March 29, 2018, 09:34:25 AM
Dad and step mom lives in Summerville....just "down the street" from Uncle Mikey....who lives within spittin distance to Middleton Place plantation...another spot you need to visit, JC.

Like Dave said, it's a beautiful but expensive area of the country to live.  Enjoy your visit to the Low Country

Expensive?  Man you don't want to go to California.  Just a couple of days ago Babe and I were talking about how affordable this area is.   :huepfenlol2:

We went by Middleton Place just before we went to dinner with Mikey and his wife.  I didn't have my camera with me that day but did take it yesterday and will do a ride report within a few days.   :2vrolijk_21:

I agree......a lot of history in Savannah and Charleston area.  These were two towns that we visited often on weekend liberty when I was stationed at the Marine Corps Air Station, Beaufort, SC.  We were just about in the middle so we went back and forth often.  I remember a lot of drunk Marines and Sailors but I don't remember all of these tourists.  Maybe my memory was a little skewed by all the alcohol back then..... :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: grim on March 31, 2018, 12:09:53 AM
Installed Hogworkz extended bags and HD fender lacelle . Liked the look but pipes were to close to the bags, After 8 hours of riding anything in the bottom of the bags got really hot. Modified exhaust to gain 1" clearance.
Title: Re: What did you do to or on your CVO today?
Post by: grim on March 31, 2018, 12:12:01 AM
Muffler mods
Title: Re: What did you do to or on your CVO today?
Post by: KGB on March 31, 2018, 03:50:48 PM
Installed Rocker Lockers, S&S Premium lifters with adjustable push rods and ran an external crankcase vent, then went on a 5 mile test ride, engine nice and quit!
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on March 31, 2018, 06:19:13 PM
Rode 'em.  All three.  Not terribly far on each one.  But all of 'em.  That always qualifies as a good day.
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on March 31, 2018, 07:56:13 PM
i fullsac...ed the SOB and changed the lifters then rocker locked it, put in some S&S high dollar lifters and just used the stock push rods...hope they give me as good of service as the ones i put in the last bike, had 38k on them and never touched it. they had the travel limiters, not sure if that had any thing to do with it. going put a caned map in it tomorrow, if i can get that figured out.... not to savvy with the oh computer stuff   ;)
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on April 01, 2018, 09:37:48 PM
 got the caned map thing done .... thanks to hdnik's, his video helped... now just need some time and better weather so i can get some riding in
Title: Re: What did you do to or on your CVO today?
Post by: FlaHeatWave on April 02, 2018, 12:37:01 AM
I was stationed in Charleston SC for 6 years.  Love that area, and would still be there if the base had not closed.  Had to sell my home and transfer to a new base.

Great pictures.  Many cool plantations in that area.  Enjoyed visiting them.  Lots of history.

'Had some wonderful days with the Shovel on that lane of oaks... Fortunate to grow up in The Holy City...
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on April 02, 2018, 08:16:50 AM
'Had some wonderful days with the Shovel on that lane of oaks... Fortunate to grow up in The Holy City...

Tried to get to Charleston from Day one in the Navy.  8 years in I finally got there.  I was there 7 years.  My favorite duty station in my 20 year career.  So much to do in the area, so much history and the People are very friendly.
Title: Re: What did you do to or on your CVO today?
Post by: Capt.D on April 03, 2018, 02:01:00 PM
Dropped off the Road Glide for the stage 4...

Sent from my SM-N950U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: grim on April 03, 2018, 09:37:11 PM
Chrome was dulling on plastic water pump cover. Thought I would make a Aluminum one and extend it. Sent it out for powder-coating then I will see how it looks.
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on April 03, 2018, 10:45:35 PM
Nice work Grim.
Title: Re: What did you do to or on your CVO today?
Post by: JCZ on April 03, 2018, 11:36:16 PM
I rode the Dragon.   A great day to do it.....kind of warm but very little traffic.
Title: Re: What did you do to or on your CVO today?
Post by: Singlebeam on April 03, 2018, 11:40:44 PM
I changed my fairing vent from Orange to black. I've already changed the chrome lower forks to black as well as the windshield trim and the exhaust. Here's a before pic.
Title: Re: What did you do to or on your CVO today?
Post by: Singlebeam on April 03, 2018, 11:41:32 PM
Here's the final result...
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on April 03, 2018, 11:46:13 PM
 :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on April 04, 2018, 12:37:13 AM
Here's the final result...
Looks awesome!
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on April 04, 2018, 12:39:28 AM
I rode the Dragon.   A great day to do it.....kind of warm but very little traffic.
I know you took it nice and slow... ;D
Title: Re: What did you do to or on your CVO today?
Post by: Singlebeam on April 04, 2018, 12:44:59 AM
Looks awesome!

Thanks, I like it much better...
Title: Re: What did you do to or on your CVO today?
Post by: JCZ on April 04, 2018, 03:49:52 AM
I know you took it nice and slow... ;D

Yep, I'm a dainty rider....    :nixweiss:

By the way, anybody else with a CVO Ultra Classic scrape the front edge of the front heat shield on the left side?  My floorboard has a few scrapes and my kickstand but the heat shield has really taken the most on that side.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on April 04, 2018, 05:32:18 AM
Here's the final result...
Looks great  :2vrolijk_21: :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Singlebeam on April 04, 2018, 09:41:00 AM
Looks great  :2vrolijk_21: :2vrolijk_21:
Thank you...
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on April 04, 2018, 06:42:50 PM
Yep, I'm a dainty rider....    :nixweiss:

By the way, anybody else with a CVO Ultra Classic scrape the front edge of the front heat shield on the left side?  My floorboard has a few scrapes and my kickstand but the heat shield has really taken the most on that side.
you mean somn like this  :nixweiss: and i ground the muffler heat shield the front board mount the kick stand also shat my pants all at the same time. that was in Arkansas on highway 7 
Title: Re: What did you do to or on your CVO today?
Post by: grim on April 04, 2018, 08:56:15 PM
Nice work Grim.
Thanks rayson56
I had a v65 Magna and  all I remember was it being hard to hang on to. Really fast.
Title: Re: What did you do to or on your CVO today?
Post by: TN on April 05, 2018, 07:49:34 AM
What did you do to or on your CVO today?

Cheated on her,  :drink: 




Title: Re: What did you do to or on your CVO today?
Post by: Singlebeam on April 05, 2018, 08:42:05 AM
What did you do to or on your CVO today?

Cheated on her,  :drink:

That's just wrong..... ;D
Title: Re: What did you do to or on your CVO today?
Post by: JCZ on April 05, 2018, 07:45:16 PM
I rode down the street to the season opening of Wheels Through Time museum....

(https://farm1.staticflickr.com/871/41261306221_2bd49a0e9b_b.jpg)

And bought my tickets for this year's raffle bike....

(https://farm1.staticflickr.com/873/40547174544_f97677a4e7_b.jpg)

(https://farm1.staticflickr.com/880/26389669247_fc4efe8f4d_b.jpg)

and enjoyed the chili lunch that was provided with Joe.....a CVO owner that I met up on the Dragon a couple of days ago.  Joe has three CVOs.....all Street Glides, a 2012, 2015 and a 2018.  The 18 is a really nice looking bike and the orange and black is just so photogenic!

(https://farm1.staticflickr.com/785/40547304394_6079ecaf10_b.jpg)



More pics to come.......
Title: Re: What did you do to or on your CVO today?
Post by: LMR on April 08, 2018, 04:02:09 PM
Installed the pushrods today. Motor feels tight as a bitch! 117cu in, T-man 625 cams. Dan Vanceheads.
Title: Re: What did you do to or on your CVO today?
Post by: Jock on April 08, 2018, 04:55:02 PM
What did you do to or on your CVO today?

Cheated on her,  :drink:

(https://www.cvoharley.com/smf/index.php?action=dlattach;topic=89705.0;attach=307458;image)

Whoa Nelly!  You can't post a pic like that and not expect a few questions!  Yours?  How long?  Whatda think of her?

 ???
Title: Re: What did you do to or on your CVO today?
Post by: OBB on April 08, 2018, 07:53:39 PM
What did you do to or on your CVO today?

Cheated on her,  :drink: 





Trying to give those 124 Hillbillies a run for their money?   :P  :huepfenlol2: :huepfenlol2:
Title: Re: What did you do to or on your CVO today?
Post by: SBB on April 08, 2018, 09:00:45 PM
What did you do to or on your CVO today?

Cheated on her,  :drink:

It's not cheating if your wife likes the new ride.
Big thanks to Mark, Banana Man!

SBB



Title: Re: What did you do to or on your CVO today?
Post by: SBB on April 08, 2018, 09:08:47 PM


Mr. Mark doing what Mark does.


SBB



Title: Re: What did you do to or on your CVO today?
Post by: Jock on April 08, 2018, 09:15:10 PM

Mr. Mark doing what Mark does.


SBB





Holy Crap!  You guys are killin' me!

(https://www.cvoharley.com/smf/index.php?action=dlattach;topic=89705.0;attach=307499;image)
Title: Re: What did you do to or on your CVO today?
Post by: TN on April 09, 2018, 07:57:45 AM
(https://www.cvoharley.com/smf/index.php?action=dlattach;topic=89705.0;attach=307458;image)

Whoa Nelly!  You can't post a pic like that and not expect a few questions!  Yours?  How long?  Whatda think of her?

 ???

Go ride one and get back with me  :orange:

Trying to give those 124 Hillbillies a run for their money?   :P  :huepfenlol2: :huepfenlol2:

  Some folks has to overcompensate for lack of riding skills, I'm stock  :drink:



It's not cheating if your wife likes the new ride.
Big thanks to Mark, Banana Man!

SBB





Don't take me out of context and I'll try and do the same, all my rides are female, it just seems natural. nice ride by the way.  :2vrolijk_21:

Ride On

TN
Title: Re: What did you do to or on your CVO today?
Post by: PFWiz on April 09, 2018, 11:19:49 AM
I just ordered a car tire for the back!

(Putting on my rain suit)

Now it doesn't matter if you guys spit on me!  :coolblue:
Title: Re: What did you do to or on your CVO today?
Post by: Rooster on April 09, 2018, 03:14:55 PM

Mr. Mark doing what Mark does.


SBB




Love the Blue. Chip, you look good as in slimmer. :drink:
Title: Re: What did you do to or on your CVO today?
Post by: Jock on April 09, 2018, 07:52:45 PM
Go ride one and get back with me  :orange:
 
Ride On

TN

That is my fear!
Title: Re: What did you do to or on your CVO today?
Post by: OBB on April 11, 2018, 08:26:00 PM

  Some folks has to overcompensate for lack of riding skills, I'm stock  :drink:



:huepfenlol2: :huepfenlol2: :huepfenlol2:  :2vrolijk_21: :2vrolijk_21:


So did you buy it or just ride it?
Title: Re: What did you do to or on your CVO today?
Post by: TN on April 11, 2018, 09:02:56 PM
:huepfenlol2: :huepfenlol2: :huepfenlol2:  :2vrolijk_21: :2vrolijk_21:


So did you buy it or just ride it?


Yeah, it’s a friends bike. A 2013 FB6, and what a fine ride.  :2vrolijk_21:  i can see a new honda in my future they have a great dealer network and besides you meet the nicest folks on a honda. Maybe


TN
Title: Re: What did you do to or on your CVO today?
Post by: SBB on April 11, 2018, 09:41:59 PM
Love the Blue. Chip, you look good as in slimmer. :drink:

Some day soon we going to take the big trip out your way.
Thanks for the compliment.

SBB



Title: Re: What did you do to or on your CVO today?
Post by: TN on April 12, 2018, 07:27:36 AM
Showed her some love yesterday while trying out a new accessory.

Traffic was light on the parkway.   :orange:    Rode 473mi  ;D


TN
Title: Re: What did you do to or on your CVO today?
Post by: CVO 2015 on April 12, 2018, 07:50:57 AM
That's a great picture TN!

Sent from my SM-G955U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: YELLOWBIRD on April 12, 2018, 08:39:45 AM
The weather is finally starting to break and the warm sunshine is heating up, roaring to 75-80 degrees for the next 5 days in my neck of the woods.

Mama asked me to put on the 2-up seat and Tourpak so she can finally get on the bike since last fall.

All I could say is "Yes ma'am!"   :bananarock:



YB



Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on April 13, 2018, 05:33:09 PM
Rode it to my "Indy" to get a front tire, hydraulic fluids, and some other stuff done.

BTW... for those that might think/say... no, the front tire wasn't dry rotted requiring it to be replaced.  :P :D  :P :D

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on April 13, 2018, 07:00:54 PM
Rode it to my "Indy" to get a front tire, hydraulic fluids, and some other stuff done.

BTW... for those that might think/say... no, the front tire wasn't dry rotted requiring it to be replaced.  :P :D  :P :D

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:


Air had just gone stale?  :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: Boatman on April 13, 2018, 08:41:44 PM

Air had just gone stale?  :nixweiss:

dOOd probably had summer air put in too!   😀
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on April 14, 2018, 11:53:04 AM

Air had just gone stale?  :nixweiss:
dOOd probably had summer air put in too!   😀
Wow... you're both right... how'd you know? ::) :P :D

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: Rooster on April 14, 2018, 01:49:55 PM
 :huepfenlol2 :huepfenlol2:
Title: Re: What did you do to or on your CVO today?
Post by: Scott7d on April 17, 2018, 10:29:53 AM
I didn't finish this up "today" but figured I'd post my before/after photos of the paint matched docking station from last week. I ride solo only and prefer no docking station, but need it for the tour pack on trips. Figured I'd get it matched along with those caps that cover the hardware. Just hitting the details!

(https://s31.postimg.cc/980p05pa3/before.jpg)
(https://s31.postimg.cc/rnl5xm8kb/after.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: Bav on April 17, 2018, 10:39:12 AM
Very nice. I hadn’t thought of doing that. Was going to get mine done in black but will have to think again. Thanks for posting


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: longlast on April 20, 2018, 02:46:04 PM
Installed a Hayden M6 BT07 primary chain tensioner today. Took it out for a ride and all sounds good shifting gears good and no leaks.
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on April 20, 2018, 03:15:25 PM
Washed and waxed. It takes me (and my OCD) about 3 hours to get the job done. I wonder if that's why I here the Gilligans Island tune in my head as I'm cleaning?  :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: kojak on April 22, 2018, 07:18:42 AM
Cerakoted the heatshields. Stuff is rated to 1800 degrees and keeps the heat in. Looks nice. At some point, I will install black 4.5" Rinehart slip-ons.
Title: Re: What did you do to or on your CVO today?
Post by: skratch on April 22, 2018, 07:44:46 AM
Washed and waxed. It takes me (and my OCD) about 3 hours to get the job done. I wonder if that's why I here the Gilligans Island tune in my head as I'm cleaning?  :nixweiss:

only 3 hrs?  it takes me that long just to do my wheels.....
Title: Re: What did you do to or on your CVO today?
Post by: OBB on April 22, 2018, 08:11:39 AM
Cerakoted the heatshields. Stuff is rated to 1800 degrees and keeps the heat in. Looks nice. At some point, I will install black 4.5" Rinehart slip-ons.
I had one of my guns cerakoted and it came out great. Never thought about the temps and how durable it is. Could come in handy in the future. Keep us posted on how well they hold up.
Title: Re: What did you do to or on your CVO today?
Post by: Bav on April 22, 2018, 10:45:23 AM
Cerakoted the heatshields. Stuff is rated to 1800 degrees and keeps the heat in. Looks nice. At some point, I will install black 4.5" Rinehart slip-ons.

Looks great. Now I’ve just got to find somewhere in the UK that does it.


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: SIKBIRD on April 22, 2018, 07:26:04 PM
Hard wired my GPS into the accessory switch so I can turn it off at night
Title: Re: What did you do to or on your CVO today?
Post by: TNCarters on April 23, 2018, 09:53:10 AM
Just started back riding after March knee scope.  Noticed my shift levers getting loose at the spline connection at rear of linkage shaft.  Rainy day Sunday so took the linkage apart and find the pinch bolt is showing some thread damage but otherwise splines look good.  Cleaned it all up and putting it back together today with new bolts, re-torqued to new spec and lots of blue Loctite.
Title: Re: What did you do to or on your CVO today?
Post by: JCZ on April 23, 2018, 10:45:48 AM
Actually, it was yesterday.  Went for a little ride by myself....a serenity ride...just to blow the cobwebs out.....here....

(https://farm1.staticflickr.com/913/39840405140_62219e85da_b.jpg)

(https://farm1.staticflickr.com/862/41608290202_2dfa2f7126_b.jpg)

(https://farm1.staticflickr.com/855/40756701195_7039944cf4_b.jpg)

(https://farm1.staticflickr.com/826/39840372130_951e6038e5_b.jpg)

(https://farm1.staticflickr.com/857/40756702455_699132d8c2_b.jpg)

(https://farm1.staticflickr.com/864/40937303094_8635a62853_b.jpg)

Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on April 23, 2018, 07:01:12 PM
satuday had to replace rear tire cause I picked up a screw, had 9k on the C2  and the tread was good and only very slight to no cupping  :-\ . today dropped it off at HD shop to get head bearings tightened up.... it just started the shake thing, should be ready to for the season once that's done, fingers crossed
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on April 23, 2018, 10:41:56 PM
only 3 hrs?  it takes me that long just to do my wheels.....


lol
Title: Re: What did you do to or on your CVO today?
Post by: dayne66 on April 24, 2018, 12:05:54 AM
Parked at the Coomb's Market......and found that a sweet old lady had backed into my front fender. The fender is the only damage...so it's not that bad. Her insurance should cover it....$1472.99 CDN just for the Ruby/Maroon w/ ghost flames fender.
Title: Re: What did you do to or on your CVO today?
Post by: dayne66 on April 24, 2018, 12:09:42 AM
And 1 more:
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on April 24, 2018, 07:15:39 AM
Glad it was only the fender and no injuries to you but dang it, Dayne, that hurts the heart to look at.... :nervous:
Title: Re: What did you do to or on your CVO today?
Post by: n8schmitz on April 25, 2018, 11:20:50 PM
Installed a new AC.(https://uploads.tapatalk-cdn.com/20180426/c9ae5186da20e7b3132e98b2af0aca06.jpg)

Sent from my SM-G950U1 using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on April 26, 2018, 11:45:23 AM
Parked at the Coomb's Market......and found that a sweet old lady had backed into my front fender. The fender is the only damage...so it's not that bad. Her insurance should cover it....$1472.99 CDN just for the Ruby/Maroon w/ ghost flames fender.



Was she courtious enough to be there waiting for you when you came out of the store? Just curious, a lot of times down here in the States people would have tried to get away with just taking off. I understand it's a whole different world up there with ICBC for insurance.
Title: Re: What did you do to or on your CVO today?
Post by: dayne66 on April 26, 2018, 01:50:02 PM
She had been looking for me.....left her name and # at the cashier in the store.......then saw us approaching the bikes and first thing apologized. Then she gave me insurance info. I called her with a price to give her the option of paying for it instead of insurance......at $1500 she opted to go through insurance. All should be good...in 6-8 weeks!
 
Title: Re: What did you do to or on your CVO today?
Post by: pudgeyxj on April 26, 2018, 01:58:00 PM
She had been looking for me.....left her name and # at the cashier in the store.......then saw us approaching the bikes and first thing apologized. Then she gave me insurance info. I called her with a price to give her the option of paying for it instead of insurance......at $1500 she opted to go through insurance. All should be good...in 6-8 weeks!
 

Bummer, glad she waited for you. Hopefully it doesn't take too long. I went down on March 11, and still waiting..... Almost $20k in all cosmetic damages

Paul
Title: Re: What did you do to or on your CVO today?
Post by: TNCarters on April 27, 2018, 04:48:06 PM
Damaged my front fender for my 2015 CVO RGU last fall and ended up replacing it.  Ordered color matched from Boardtracker for about $800.  Four bolts and its replaced.  Paint was a perfect match.  Fender came very well wrapped in tissue wrap and packing.  Don't know if that is HD standard or Boardtracker.  They quote a 30 day lead time but it shipped in less than a week after order was placed.

That is a nicely shined tank n8schmitz in pic several posts above.
Title: Re: What did you do to or on your CVO today?
Post by: Mutt on April 27, 2018, 05:29:10 PM
Finished installing air ride kit last night.

Ordered a Dragonfly Cycles fairing 2 weeks ago and will be installing it when it comes in.

Ordered a set of Todd’s handlebars and mustache style crashbars today.
Title: Re: What did you do to or on your CVO today?
Post by: Grizzly on May 04, 2018, 05:46:42 PM
Took off my old seat.
Title: Re: What did you do to or on your CVO today?
Post by: Grizzly on May 04, 2018, 05:48:38 PM
... and installed my new custom seat.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on May 04, 2018, 09:10:36 PM
... and installed my new custom seat.
Very nice  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Jock on May 04, 2018, 09:18:35 PM
... and installed my new custom seat.

Sweet
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on May 07, 2018, 09:10:51 AM
Not today but just now posting. Got a hankerin' for a good steak so Vickie and I rode over to Tunics, MS Saturday and had a great meal at the Chicago steakhouse. Got back around 2100 Sunday night. 920 miles round trip in two days...now that's what I call a dinner date  ;D
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on May 07, 2018, 09:41:30 AM
... and installed my new custom seat.

That is one, fine looking seat, griz. Hope it rides well for you, sir.
Title: Re: What did you do to or on your CVO today?
Post by: Grizzly on May 07, 2018, 10:06:44 AM
Thanks guys for all the nice comments on my new seat.

I enjoyed a good ride on it this past weekend and although the old seat was not uncomfortable, the new one with the gel pad is that much better!  Possibly it's an age thing?  :P

I'm very pleased with the way it turned out.

Thanks again.
Title: Re: What did you do to or on your CVO today?
Post by: acevtwin on May 07, 2018, 01:54:26 PM
... and installed my new custom seat.
Very Nice Griz! I didn't see what brand it is.
Title: Re: What did you do to or on your CVO today?
Post by: Grizzly on May 07, 2018, 05:15:51 PM
Very Nice Griz! I didn't see what brand it is.

Actually it is my original CVO stock seat.  After coming up with a design I had a local upholsterer cut in the gel pads while recovering it, and he arranged for the embroidery work to be done.
Title: Re: What did you do to or on your CVO today?
Post by: Icewater on May 07, 2018, 07:44:43 PM
Actually, it was yesterday.  Went for a little ride by myself....a serenity ride...just to blow the cobwebs out.....here....

(https://farm1.staticflickr.com/913/39840405140_62219e85da_b.jpg)
This brings back some great memories. I was fortunate to spend several years out there in the early eighties and loved the riding and the people.
Title: Re: What did you do to or on your CVO today?
Post by: KGB on May 10, 2018, 05:38:17 PM
Changed the brake fluid and clutch fluid
Title: Re: What did you do to or on your CVO today?
Post by: Icewater on May 10, 2018, 05:57:21 PM
I'm on day 7 of my 15 day no ride order from my surgeon. I planned ahead and ordered Khrome Works 10" Bagger Bars and a new set of slip ons.  These were the first two items on my list of things I wanted to do to my new to me scooter. I made arrangements to have my son take my head pipe to have it welded after I gutted it so I dug in this morning and started disassembly. I feel like I won a lottery.
I pulled the bags off and found Progressive rear shocks. So now I am not only happily surprised but understand why it handles so much better than I had anticipated. I pull the heat sheilds off and notice the head pipe looks different than stock. I pulled the slip ons off and shine a light in there and it is wide open to the O2 sensors. Now I even happier but wondering why I was getting so much heat on the right and the slip ons had been nearly welded in place. I look thru the slip ons and can only see a pin hole of light. New ones have 2-1/2" thru baffle and no other restriction. I fired it up and the neighbor who is not a fan of loud came over with a huge smile on his face. "What are those they sound awesome?" I told him they are Tennessee Tips from JP cycle and they are my third set. He said he had missed the sound of the '06 I traded. I did too. I think the heat will lessen now too. Tomorrow is bar day. If anyone recognizes the head pipe please let me know what kind it is. I'm still grinning. 330.00 for the bars, bushings and mufflers and then the surprises. Previous owner wherever you are THANK YOU!
Title: Re: What did you do to or on your CVO today?
Post by: TraumaSlave on May 11, 2018, 09:17:56 AM
Well, yesterday, I rode 12 hrs of back roads home from DeLand Florida to Madisonville Tennessee. 586 miles and a sore butt.
Title: Re: What did you do to or on your CVO today?
Post by: TNCarters on May 11, 2018, 10:09:05 AM
Icewater, that head pipe looks a bit like the Fuelmoto 2/1/2.  Hard to tell as cant see the crossover very well.  I had one on my 2011 Limited.  Mine has slightly reduced diameter crossover and additional plugged O2 bungs up near the heads.
Title: Re: What did you do to or on your CVO today?
Post by: lyn.husen on May 11, 2018, 03:13:28 PM
Added an UltraCool 2.0 (https://uploads.tapatalk-cdn.com/20180511/704a3be89d4abc95613fe5028931d7a0.jpg)Twin Fan Assisted oil cooler


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Icewater on May 11, 2018, 03:21:32 PM
Icewater, that head pipe looks a bit like the Fuelmoto 2/1/2.  Hard to tell as cant see the crossover very well.  I had one on my 2011 Limited.  Mine has slightly reduced diameter crossover and additional plugged O2 bungs up near the heads.
Thank you much. The crossover is slightly reduced. I aporeciate the info. I haven't gotten to ride it so if I end up needing to adjust the tune it will help. Previous owner also left his tuner but I will have to register it with Dyno Tech and don't know if any info will transfer.
Thanks again
John
Title: Re: What did you do to or on your CVO today?
Post by: OBB on May 11, 2018, 08:57:35 PM
Thank you much. The crossover is slightly reduced. I aporeciate the info. I haven't gotten to ride it so if I end up needing to adjust the tune it will help. Previous owner also left his tuner but I will have to register it with Dyno Tech and don't know if any info will transfer.
Thanks again
John
That tuner is married to the bike. Not the previous owner. Not sure if it will need registered again.
Title: Re: What did you do to or on your CVO today?
Post by: Icewater on May 11, 2018, 09:24:01 PM
That tuner is married to the bike. Not the previous owner. Not sure if it will need registered again.
Thank you. I think I remember that now. I had the same one on my '06 I traded on this bike and left it go with the bike since I got one with this one. I goofed up and let the booklet go too but I figure I can find what I need online or adk here. Thanks again. 
John
Title: Re: What did you do to or on your CVO today?
Post by: groupw on May 19, 2018, 11:19:41 PM
.......... re-striped 'er

(http://i68.tinypic.com/2rxdzeb.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: YELLOWBIRD on May 20, 2018, 07:16:41 AM
.......... re-striped 'er

(http://i68.tinypic.com/2rxdzeb.jpg)





GW,

Pinstripe looks great, bet it's faster already by adding the Speed Yellow Pinstripe!




YB


Title: Re: What did you do to or on your CVO today?
Post by: OBB on May 20, 2018, 12:11:17 PM
.......... re-striped 'er

(http://i68.tinypic.com/2rxdzeb.jpg)
Looking good. Can't wait to see it in a few months.
Title: Re: What did you do to or on your CVO today?
Post by: Trigger-Man on May 28, 2018, 06:34:30 PM
Upgraded my 2015 SERG's SE High-Flow Exhaust System Nightstick mufflers. Stumbled across a set of near new 4.5" SE Street Cannons on eBay which apparently were take-offs from a SE High-Flow Exhaust System for the M8 (2018 P&A). Incredibly, each muffler has the 2.25" diameter inlet required to fit my header pipes! I've gotta say that this combination is the best sounding exhaust system I've ever experienced for touring. The large diameter mufflers produce a very satisfying deep Harley rumble at low throttle and a nice throaty sound under acceleration, even with the cats in the mufflers. I've gotta highly recommend the SE High-Flow Exhaust System for a really nice combination of sound and performance …...at least for senior ears like me :2vrolijk_21:!
Title: Re: What did you do to or on your CVO today?
Post by: CVO 2015 on May 28, 2018, 07:56:40 PM
Just got back to So. Cal from Vegas...We took the long way home through Pahrump and Death Valley, where we saw 100 degree temps today..(https://uploads.tapatalk-cdn.com/20180528/026253a912415e8e879bbf33a8d82502.jpg)

Sent from my SM-G955U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: DesertHOG on May 28, 2018, 10:25:21 PM
Just got back to So. Cal from Vegas...We took the long way home through Pahrump and Death Valley, where we saw 100 degree temps today..(https://uploads.tapatalk-cdn.com/20180528/026253a912415e8e879bbf33a8d82502.jpg)

Sent from my SM-G955U using Tapatalk

I was there on Saturday and left for home on Sunday. I got out early and I don't think Saturday reached 100. Fun ride.

Title: Re: What did you do to or on your CVO today?
Post by: CVO 2015 on May 28, 2018, 11:57:14 PM
I was there on Saturday and left for home on Sunday. I got out early and I don't think Saturday reached 100. Fun ride.
We went swimming in Vegas on Saturday and Sunday...Sunday was warmer with temps in the 90s, but about 5pm it got windy...Next week I will stay local (hit a few beaches and possibly Big Bear) and in two weeks ride up to Canada (but I think I will take my Roadglide)

Sent from my SM-G955U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: Jock on May 30, 2018, 09:14:45 PM
Cleaned her up for Eureka Springs only to get dirty again!

 :D
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on May 31, 2018, 12:09:12 PM
Had my new oil cooler fan activated and went for a little 100 mile ride after work yesterday.
Title: Re: What did you do to or on your CVO today?
Post by: Capt.D on May 31, 2018, 12:55:13 PM
Had my new oil cooler fan activated and went for a little 100 mile ride after work yesterday.
Let us know if it makes a difference

Sent from my SM-N950U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on May 31, 2018, 06:23:04 PM
There is no gauge for comparison purposes Capt. D but the fan does pull a bunch of air when engaged (I let it sit and idle long enough to kick on to test it) so I'm sure it will help when called upon to do so.
Title: Re: What did you do to or on your CVO today?
Post by: Capt.D on May 31, 2018, 06:31:34 PM
I'm think about adding one to mine

Sent from my SM-N950U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: DesertHOG on June 02, 2018, 09:42:17 AM
I did a 5k oil change on Betty in preparation for my ride to MITM. I've changed my oil on the Beemers plenty of times but first time for my HD. Hope I got it right :)

Title: Re: What did you do to or on your CVO today?
Post by: kojak on June 02, 2018, 10:48:29 AM
Upgraded my 2015 SERG's SE High-Flow Exhaust System Nightstick mufflers. Stumbled across a set of near new 4.5" SE Street Cannons on eBay which apparently were take-offs from a SE High-Flow Exhaust System for the M8 (2018 P&A). Incredibly, each muffler has the 2.25" diameter inlet required to fit my header pipes!
Unless the headpipe sizes changed from 2017 to 2018, my M8 has different size inlets on the right side and the left side.
Title: Re: What did you do to or on your CVO today?
Post by: Leadwolf on June 03, 2018, 11:12:40 AM
Changed the hand grips and replaced the OEM license plate frame with a curved one.


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: GQ_Knuckle_Draggerz on June 03, 2018, 07:54:46 PM
(https://uploads.tapatalk-cdn.com/20180603/378664fd0eb9df67da2377b1a620b270.jpg)(https://uploads.tapatalk-cdn.com/20180603/a66faeaa50e469848ec20caf194c1ab8.jpg)

Installed my new Screamin’ Chicken shift linkage courtesy of Puzzled. 


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: ScottAL on June 04, 2018, 02:20:39 AM
Unless the headpipe sizes changed from 2017 to 2018, my M8 has different size inlets on the right side and the left side.
The high flow exhaust system moves the cats to the mufflers and changes the inlet size to 2.25" on both left and right so you can't take the now cat free head pipe and easily install cat free slip ons.

https://www.harley-davidson.com/store/high-flow-exhaust-system-with-street-cannon-mufflers-pa-18-64800062--1 (https://www.harley-davidson.com/store/high-flow-exhaust-system-with-street-cannon-mufflers-pa-18-64800062--1)
Title: Re: What did you do to or on your CVO today?
Post by: kojak on June 04, 2018, 06:00:02 PM
The high flow exhaust system moves the cats to the mufflers and changes the inlet size to 2.25" on both left and right so you can't take the now cat free head pipe and easily install cat free slip ons.

https://www.harley-davidson.com/store/high-flow-exhaust-system-with-street-cannon-mufflers-pa-18-64800062--1 (https://www.harley-davidson.com/store/high-flow-exhaust-system-with-street-cannon-mufflers-pa-18-64800062--1)
On the 2017 m8. the right side inlet is 2.5" and the left side is 1.75" if I remember right. I just installed slipons on my bike, thats how I know.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on June 04, 2018, 07:12:15 PM
On the 2017 m8. the right side inlet is 2.5" and the left side is 1.75" if I remember right. I just installed slipons on my bike, thats how I know.

Once you change to the HD performance header, the outputs of the head pipe are  now the same size on each side as the cats move into the mufflers. I believe that's what the previous member was saying.
Title: Re: What did you do to or on your CVO today?
Post by: 4fun on June 04, 2018, 08:27:19 PM
took a ride to the Delaware Water Gap(https://uploads.tapatalk-cdn.com/20180605/615babb9849fd244affb9ef5c44c36bd.jpg)

Sent from my SM-G930V using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: Capt.D on June 05, 2018, 01:02:06 AM
They sent me a video of mine after the stage 4 upgrade and D&D exhaust.... I go home next week...can't wait to see how she does....http://cloud.tapatalk.com/s/5b1619441dc25/received_10212874660521495.mp4 (http://cloud.tapatalk.com/s/5b1619441dc25/received_10212874660521495.mp4)

Sent from my SM-N950U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: kojak on June 05, 2018, 05:36:34 PM
Once you change to the HD performance header, the outputs of the head pipe are  now the same size on each side as the cats move into the mufflers. I believe that's what the previous member was saying.
I was thinking that for a sec but I don't see any header upgrades for the cvo m8 touring bikes, that's why I was asking.
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on June 06, 2018, 12:52:36 AM
I did my 5k service and upgraded my clutch springs to some heavier ones that I bought from AIM.
Title: Re: What did you do to or on your CVO today?
Post by: ScottAL on June 06, 2018, 01:23:00 AM
I was thinking that for a sec but I don't see any header upgrades for the cvo m8 touring bikes, that's why I was asking.
Link to just that was in my post but here it is again. And yes, that is what I was saying, the stock pipes are just what you say, it is when you change to this performance exhaust that the header pipe outlet/muffler inlet size changes to 2.25". You can't buy just the header, you have to get the whole system.

https://www.harley-davidson.com/store/high-flow-exhaust-system-with-street-cannon-mufflers-pa-18-64800062--1 (https://www.harley-davidson.com/store/high-flow-exhaust-system-with-street-cannon-mufflers-pa-18-64800062--1)
Title: Re: What did you do to or on your CVO today?
Post by: Yellow09SERG on June 10, 2018, 06:04:48 PM
Gave the front wheel a new shoe, new bearings, and its 20,000 mile clean up. Should be ready for another 20,000.  :bananarock:
Title: Re: What did you do to or on your CVO today?
Post by: CVO 2015 on June 11, 2018, 01:33:19 AM
Headed up to Canada on my 3015 Streetglide CVO..The wife is on her 2014 Limited...(https://uploads.tapatalk-cdn.com/20180611/8713e34d36fd95e254353f3efe5711b0.jpg)(https://uploads.tapatalk-cdn.com/20180611/6f8261bdd47dd83f6d6340e8dbce5f2d.jpg)(https://uploads.tapatalk-cdn.com/20180611/f502706f8b7e39f7d7978ec1091af7d0.jpg)

Sent from my SM-G955U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on June 11, 2018, 01:23:45 PM
Had a new front tire installed on my 2018 CVO Street Glide. Managed to get 18k out of it. Also installed the oil cooler fan and had the dealer flash it.

Sent from my SM-N950U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on June 11, 2018, 01:52:26 PM
18k already? Holy crap, good for you!! Good job on the fan install.
Title: Re: What did you do to or on your CVO today?
Post by: CHH_Badkarma on June 16, 2018, 01:34:38 AM
Replaced my "Dud"lops. Back was a little tweaked so good excuse for an upgrade

(https://farm2.staticflickr.com/1823/42110540494_5810394742_b.jpg) (https://flic.kr/p/27aawzC)
(https://farm1.staticflickr.com/895/41927103715_52f2c930cc_b.jpg) (https://flic.kr/p/26SXndx)
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on June 17, 2018, 08:53:40 PM
Finally got around to riding a fair amount this weekend. Rode a poker run yesterday with Dwayne and Pam and the two Steves, then rode down to the Swinging Bridge with Dwayne and Pam, Steve (WW) and Sylvia, Miss Susan and the one and only Carl Lee Hubbard.


Both days glorious days for riding but a tad on the warm side for up here in the mountains. Getting ready for WV GTG....
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on June 18, 2018, 05:43:59 PM
Gave the bike a good detailing, on Saturday.  Hooked it up on a tender for the first time in about a year in a half. 
Nice to have the bike in my garage vs a storage unit.


Title: Re: What did you do to or on your CVO today?
Post by: CVO 2015 on June 19, 2018, 09:00:38 PM
On vacation returning from Vancouver back to Cali..(https://uploads.tapatalk-cdn.com/20180620/ea4d5137aa19b0c680e4ef70669daede.jpg)

Sent from my SM-G955U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on June 24, 2018, 05:07:31 PM

Headed up to Canada on my 3015 Streetglide CVO..




Dammit.  Now I've got Zager and Evans stuck in my head.....




I worked on the old FXR2 today.  Got up early.  It was raining so said screw it and went back to bed.  Got up again later, went to brunch, then changed the handlebars on the bike.

As it came to me it had a drag bar on it.  Even with the tall-ish and angled risers it made my shoulders and back uncomfortable.  Went with a Wild1 255 bar.  Gained some height and some pullback.  It's much better now.  Barnett's Plantinum braided cables, new braided brake line, replaced the old and flaking switch housings and replaced the original black master cylinder and clutch perch with new chrome stuff.  Also put on a set of braided spoons.  I know, the braided levers with tassels screams 1970s but it's a look I've always liked. 
Title: Re: What did you do to or on your CVO today?
Post by: ZVO on June 25, 2018, 04:24:39 AM
Added highway pegs, back rest, and looked at the shifter levers for comfort.
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on June 25, 2018, 11:42:50 AM
I finally did my long awaited fairing lowers and engine guard conversion.  :bananarock: I used the Vivid Black kit which I bought from Reggie at Hoarnytoad Harley as they had the best discount this time. The airflow control is night and day. I'm so glad to have my lowers back and the redesigned Rushmore lowers definitely seem to work better than the previous design that were on my 2011 SESG. I'm waiting on my new highway peg mounts as the billet Harley style that I used previously have a clearance issue.

And Harley still says it can't be done! Thanks everyone here for helping to prove them wrong....again.

Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on June 25, 2018, 11:46:24 AM
Here is a pic

Title: Re: What did you do to or on your CVO today?
Post by: Bav on June 25, 2018, 12:34:21 PM
What pegs are you using on the highway mounts? Can you get ones the same as the passenger pegs?


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on June 25, 2018, 01:06:10 PM
I am using my passenger pegs which I replaced with matching passenger floorboards. I believe that you CAN order another set of pass. pegs from Harley but your VIN # will be required for proof of ownership since they are exclusive to a CVO.
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on June 30, 2018, 08:01:54 PM
Do today?  It was a good day  :2vrolijk_21: .


Left the house this morning on the Road Glide.  It was full of fuel.  Had breakfast while out.  Got home the bike is out of fuel and killed several bugs.  Bike was happy.

Left the house again mid afternoon.  This time the Road King.  It was full of fuel.  Had dinner while out.  Got home and the bike is out of fuel and has a lot of bugs.  Bike was happy.

Will clean them tomorrow.

Couldn't ride the FXR.  It's up on the lift.  Waiting on a couple of small bits to finish the floorboards install.
Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on July 04, 2018, 06:42:05 PM
Had the 20,000 mile service done on my 2018 CVO Street Glide before I head to British Columbia and Alberta in a few weeks. 

Sent from my SM-N950U using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on July 04, 2018, 11:43:40 PM
Finally put the floorboards on the FXR this afternoon.  Yeah me.
Title: Re: What did you do to or on your CVO today?
Post by: Jock on July 05, 2018, 07:31:01 PM
Finally put the floorboards on the FXR this afternoon.  Yeah me.

How do they feel and look?
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on July 05, 2018, 08:53:14 PM
How do they feel and look?



The feel is going to be much better Dick.  With the forward controls my right knee was against and leg was wrapped around the air cleaner.  Was also stretched out so far didn't get much bend in the knees.  Would never have been good for more than a two tank day.  Only question in the first impressions now is wish either the boards were a little lower (can't happen, no adustability) or the seat were a little higher.  It's not a huge thing though.  Everything else is much much better. 

With the change in the handlebars and getting the windshield on it the old bike is much closer to an all day bike now if one were so inclined.  Am pleased with the result.  Will get a picture or three up right away.
Title: Re: What did you do to or on your CVO today?
Post by: longlast on July 05, 2018, 11:14:44 PM
Was out back road country up hill riding today  :huepfenlol2:

Motor still in test mode got a bit of  sorting out to do nothing major some exhaust popping on decel, well i say some it's more then I'm liking .
    I stopped over at my mates place and did a bit more work on the mini project
Title: Re: What did you do to or on your CVO today?
Post by: hooperville on July 06, 2018, 12:10:34 PM
(https://uploads.tapatalk-cdn.com/20180706/8dafbd3f252e11e7b4ecf22aa1138260.jpg)

I called George at CVO Backrest to see if he had changed his design as mine had a good amount of flex to it (purchased approximately a year ago for a 16 CVO Street Glide). He said he had and before I could offer to pay, he said I’ll ship one out to you tomorrow morning at no charge. WOW! I installed on my 18 CVO Road Glide and there is “NO” flex! Outstanding backrest and wanted to give a shoutout to George! If you’re in the market for a backrest, give it a look you won’t be disappointed.

http://www.cvobackrest.com/

Cheers,
Chris
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on July 08, 2018, 06:56:42 AM
Took a nice ride here in SW Florida, nice to get out on the bike.
Too many competing priorities with the move.
Title: Re: What did you do to or on your CVO today?
Post by: hoser6868 on July 08, 2018, 10:06:30 AM
Took a ride up into the mountains here in Idaho.

(https://uploads.tapatalk-cdn.com/20180708/00bddcc5055fcf6b7cb6380aed855477.jpg)

(https://uploads.tapatalk-cdn.com/20180708/340f85fb2d785879b2797d4c777f8e34.jpg)

(https://uploads.tapatalk-cdn.com/20180708/e3bdc5a7309d93742a78bf1e723d4d35.jpg)


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: yobtaf103 on July 08, 2018, 01:09:25 PM
Nice , what windshield is that ?
Title: Re: What did you do to or on your CVO today?
Post by: miceracs on July 08, 2018, 03:38:07 PM
Decided to keep bike for another 3 years, (2015 roadglide)
nothing currently being developed seems suitable to invest. New engine not yet tested.
 :orange:
installed the wireless coms system last month get rid of the old wire system.
not happy, the mic is too sensitive and unable to hear intercom. Sena have not been very helpful.  I would not recommend installing this kit.   :worthless:

Also, upgraded to stage 4 (117) kit. Much better torque for towing the trailer.
recommend this.    :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Bav on July 09, 2018, 06:24:52 AM
Took a ride up into the mountains here in Idaho.

(https://uploads.tapatalk-cdn.com/20180708/00bddcc5055fcf6b7cb6380aed855477.jpg)

(https://uploads.tapatalk-cdn.com/20180708/340f85fb2d785879b2797d4c777f8e34.jpg)

(https://uploads.tapatalk-cdn.com/20180708/e3bdc5a7309d93742a78bf1e723d4d35.jpg)


Sent from my iPhone using Tapatalk

Looks great in the sunshine. Can’t wait to take delivery of mine hopefully at the weekend. Fingers crossed as the weather if amazing here in the UK at the moment.


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Chief2505 on July 09, 2018, 04:50:08 PM
Spent the weekend putting the good lights, shocks and highway pegs back on my 13 CVO Ultra, decided since I cannot sell it, unless I want to give it away almost, that I am going to ride the heck out of it! Oh also gave the bike one of the best shines I have ever done!!

2 1/2 weeks and we are off to Yellowstone!
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on July 09, 2018, 05:28:36 PM
  ordered some cup holders ….  :nixweiss: :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: kojak on July 21, 2018, 03:04:12 PM
Installed chrome tie down brackets. 10 minute job!
Title: Re: What did you do to or on your CVO today?
Post by: Aussie on July 22, 2018, 05:01:35 AM
Installed chrome tie down brackets. 10 minute job!
They look neat, what brand are they. HD ?
Can you take a picture showing the bracket side on.
Title: Re: What did you do to or on your CVO today?
Post by: Joel on July 22, 2018, 11:06:10 AM
Added the Custom Dynamics rear blinkers.
Did the saddle bag lights and the front a little while back
Title: Re: What did you do to or on your CVO today?
Post by: kojak on July 22, 2018, 12:26:25 PM
They look neat, what brand are they. HD ?
Can you take a picture showing the bracket side on.
They are HD, $59 but you can for find them for 20% off online. They are model specific. Install is very easy even with the light kit the cvo limited has.
Title: Re: What did you do to or on your CVO today?
Post by: miceracs on July 22, 2018, 02:12:47 PM
Done couple of jobs
Upgraded WHIM to latest version, headsets at latest versions,  configured wireless settings as per utube. Now Mic issue almost fixed. Now able to hear music up to 60mph, 60-70 slight breakup, over 70mph chite.

Also completed 117 upgrade by installing new air filter unit.
Now just need to get bike tested on dyno.

Title: Re: What did you do to or on your CVO today?
Post by: backroad Mike on July 23, 2018, 07:55:17 PM
Reinstalled my HD radio after having the vibration damage fixed by Iron Cross.  While there had the LED color changed to Green.  The oil pressure and volt meter were led bulbs from Superbrightleds.com;  and the Speedo and Tack were done by Gage Modz..

I'm very pleased.

Title: Re: What did you do to or on your CVO today?
Post by: Joel on July 23, 2018, 09:13:10 PM
Green lights look really good
Title: Re: What did you do to or on your CVO today?
Post by: JCZ on July 23, 2018, 10:03:31 PM
I went for a ride around Flaming Gorge, Utah.  You can catch it later this evening over on the Ride Report board.
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on July 23, 2018, 10:35:45 PM
Rode the old FXR2 a couple hundred miles.  Earlier in the day did about 125 on the Road Glide.  Have to ride the Road King tomorrow so it doesn't get pissed off.
Title: Re: What did you do to or on your CVO today?
Post by: Supershooter on July 25, 2018, 10:50:06 PM
I serviced by bike over the weekend, when I dropped the transmission oil it was pink. What kind of oil,was that?

Supershooter
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on July 25, 2018, 10:56:13 PM
 pink? probly red line …. lot of guys on here use it
Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on July 30, 2018, 08:38:20 PM
New rear tire installed. Heard good comments from some folks about the 180/55B 18 80H Dunlop American Elite for the  CVO's so I'm trying it out.

Sent from my SM-N950U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: OBB on July 31, 2018, 08:18:08 AM
Rode it over Wolf Creek Pass today on the way to the Road Glide national GTG in Durango , AKA Shark Week. Gonna enjoy the next few days our here.

Ran into FL Heatwave, Let's Roll (first time I've met Gabe) Major Tom, Desert Hog, Smarty, Tdkart, and I see GroupW's CVO here as well.

Sent from my boring Droid phone.

Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on July 31, 2018, 11:33:45 AM
Dang Mike

Be careful out there, you are running with a bunch of ruffions. Big Ed, G'day, Big Sexy and the rest...my goodness such an elite crowd...lol
Title: Re: What did you do to or on your CVO today?
Post by: OBB on August 01, 2018, 08:34:08 AM
Simon got his Shark back with the new engine so at least we don't have to worry about catching up to that Beemer of his.

Sent from my boring Droid phone.

Title: Re: What did you do to or on your CVO today?
Post by: longlast on August 02, 2018, 09:54:19 PM
Give it a cleaning
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on August 11, 2018, 06:35:01 PM
Warranty work.... Replaced the blown left saddlebag speaker and left handlebar control (wouldn't start in gear with clutch pulled in). I don't have any way to know if the speaker is the updated model or not. It is apparently the same part #.
Fairing vent system closures were getting sticky. Lubed them with Boeshield T-9. Great stuff! Seem to work great now.
Title: Re: What did you do to or on your CVO today?
Post by: GKroadking on August 12, 2018, 09:44:50 AM
added some additional light to my King.

Ciro
Bag Blades Saddlebag Lights
Title: Re: What did you do to or on your CVO today?
Post by: GKroadking on August 12, 2018, 09:46:02 AM
one more
Title: Re: What did you do to or on your CVO today?
Post by: 4fun on August 20, 2018, 05:02:43 PM
It was such a beautiful day out, mid 70's. Took a ride to the Jersey shore. (https://uploads.tapatalk-cdn.com/20180820/01e162f9c39dfea05d5796f1c48a6e9c.jpg)

Sent from my SM-G960U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on August 20, 2018, 06:03:04 PM
  thinking about giving it a bath... just got back from a 5547 mile road trip and it looks pretty bad, took the long way home from stirgus
Title: Re: What did you do to or on your CVO today?
Post by: Para Bellum on August 22, 2018, 02:25:05 AM
Took a group of 8 bikes to SW Oregon to ride jet boats on the Rogue River.  Had a great time.
Title: Re: What did you do to or on your CVO today?
Post by: CHH_Badkarma on August 22, 2018, 08:50:30 PM
Dirty girl got a bath

(https://farm2.staticflickr.com/1842/30340092418_ef4d1f6ef0_b.jpg) (https://flic.kr/p/Ne3UrG)
Title: Re: What did you do to or on your CVO today?
Post by: MC16LTD on August 24, 2018, 11:32:49 PM
Rode to work...and ordered a new battery.
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on August 25, 2018, 12:57:08 AM
Ordered a new King Tour-pak
Title: Re: What did you do to or on your CVO today?
Post by: Jock on September 02, 2018, 08:11:34 PM
Havin' a 60,000 mile service perfo'med t'git her Maggie Valley ready! Fry mah hide!    :huepfenjump3:
Title: Re: What did you do to or on your CVO today?
Post by: DesertHOG on September 02, 2018, 10:48:15 PM
Havin' a 60,000 mile service perfo'med t'git her Maggie Valley ready! Fry mah hide!    :huepfenjump3:

Welcome back to the Southern 48. See you in The Valley.

DH, BS, Simon
Title: Re: What did you do to or on your CVO today?
Post by: dayne66 on September 03, 2018, 10:07:12 AM
Put in a new battery......just started noticing a bit of slow cranking.....as a pe-emptive measure.......before a trip to Salmon Arm.

Got 3 years out of the old one....good 'nuff!
Title: Re: What did you do to or on your CVO today?
Post by: TNCarters on September 03, 2018, 08:04:38 PM
Same here, just replaced the battery after 3.5 years and put detached tour pack back on getting ready for MV.  Battery was not dead yet but it seemed to be cranking a bit slower when engine was cold.  Figure its better to replace a bit early than to wait and get stranded somewhere.
Title: Re: What did you do to or on your CVO today?
Post by: CVO 2015 on September 05, 2018, 08:48:01 AM
Ordered a Harmon Kardon amp and Boom 2 speakers for my lowers on my 2015 CVO , along with all of the wire harnesses..Having it installed while I head out to Hawaii next week, rent a few 2018 M8s and cruise around  the Big Island..

Sent from my SM-N960U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on September 05, 2018, 08:45:21 PM
Ordered a Harmon Kardon amp and Boom 2 speakers for my lowers on my 2015 CVO , along with all of the wire harnesses..Having it installed while I head out to Hawaii next week, rent a few 2018 M8s and cruise around  the Big Island..

Sent from my SM-N960U using Tapatalk


Nice, enjoy and report back.
Title: Re: What did you do to or on your CVO today?
Post by: Jock on September 06, 2018, 08:51:26 PM
Packin' up for the Valley!
Title: Re: What did you do to or on your CVO today?
Post by: shaochieh.young on September 07, 2018, 01:11:38 AM
Road the bike from Germany to Faak for European bike week.


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: bigC on September 07, 2018, 08:41:38 PM
Had the 25,000 mile service done, before heading to Maggie Valley.
Title: Re: What did you do to or on your CVO today?
Post by: GKroadking on September 09, 2018, 12:11:49 PM
After I had a slipping clutch in sixth gear while accelerating, I strengthened the clutch on my King yesterday.
Now at low speeds slightly more effort, at higher then but noticeably more manual effort required

But working great and more than satisfied.
(https://uploads.tapatalk-cdn.com/20180909/9b87a3cb8f95c357e0e8213b200cbeae.png)


Gesendet von iPhone mit Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: longlast on September 09, 2018, 06:20:52 PM
Gave the bike a going over check tyre psi, shocks psi, oils, put together a little tool kit,  checked belt tension,  give in a cleaning.
Making sure it's ready for a trip to Northumberland with the wife . We'll be spending 4 days up there riding around seeing the sites.
Title: Re: What did you do to or on your CVO today?
Post by: Bav on September 10, 2018, 01:42:03 PM
Stopped over last night just off Stanislas Square in Nancy France on my way to Germany for a break. What an interesting and beautiful place. Weather is fantastic. Loving my 18 SERG!

(https://uploads.tapatalk-cdn.com/20180910/2db181fbae06a479b3c69c53642cb7c6.jpg)

(https://uploads.tapatalk-cdn.com/20180910/9b6497662a0a69337ac2b9210d5bb29f.jpg)

(https://uploads.tapatalk-cdn.com/20180910/66d27f9ec7d15f51571db1d2ed742ee4.jpg)

(https://uploads.tapatalk-cdn.com/20180910/825563b7f53067c00d06d1241bef102b.jpg)


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on September 10, 2018, 07:50:19 PM
I finished my 10K service today. Ready to ride if our weather will cooperate!!
Title: Re: What did you do to or on your CVO today?
Post by: dayne66 on September 10, 2018, 11:19:46 PM
Told her she's getting some upgrades this winter.....and isn't gong to be traded off!!!    Suspension (f&r)....top end.....chain tensioner..........and none of it will be HD branded!!!
Title: What did you do to or on your CVO today?
Post by: Bav on September 11, 2018, 09:40:17 AM
Called in at Ricks Motorcycles in Baden Baden Germany. Wanted to get them to look at the clutch cable adjustment on my girls Softail Street Bob. They sorted it free of charge. They have changed it on the 18 onwards cable bikes to a spring loaded plastic tube thingy that confused me but it looks really simple when a tech shows you how. They have a new CVO the same as mine in there but no 2019 bikes.

(https://uploads.tapatalk-cdn.com/20180911/9a328538b1d520b409c5c66bc0977840.heic)


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Capt.D on September 12, 2018, 11:38:22 PM
Well I took mine in for its first service and to get dyno tuned. Ended up trading for a 19 model.....they ordered the stuff to do a stage 4 on it so it should be done in a couple weeks.(https://uploads.tapatalk-cdn.com/20180913/7a180189013518258f7cf5122024e445.jpg)

Sent from my SM-T827V using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: Grizzly on September 13, 2018, 08:05:37 AM
Yup, sometimes those darn services can get a tad expensive.  ;D

Congrats on your beautiful new ride.  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on September 13, 2018, 09:56:53 AM
Well I took mine in for its first service and to get dyno tuned. Ended up trading for a 19 model.....they ordered the stuff to do a stage 4 on it so it should be done in a couple weeks.(https://uploads.tapatalk-cdn.com/20180913/7a180189013518258f7cf5122024e445.jpg)

Sent from my SM-T827V using Tapatalk

Cap, that is one, fine looking ride sir.  Congrats.... :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Capt.D on September 13, 2018, 10:09:16 AM
Cap, that is one, fine looking ride sir.  Congrats.... :2vrolijk_21:
Thanks.... the pics don't really do it justice. 

Sent from my SM-N950U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: GQ_Knuckle_Draggerz on September 14, 2018, 05:51:37 PM
Well I took mine in for its first service and to get dyno tuned. Ended up trading for a 19 model.....they ordered the stuff to do a stage 4 on it so it should be done in a couple weeks.(https://uploads.tapatalk-cdn.com/20180913/7a180189013518258f7cf5122024e445.jpg)

Sent from my SM-T827V using Tapatalk

f$%*in’ A.  It’s only money & can’t take it w u

Ride that big nasty Mako hard like it’s meant to be.


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on September 16, 2018, 08:01:17 PM
Replaced the right side lower vent switch.  Under warranty too.  ::)
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on September 16, 2018, 10:25:27 PM
Rode all over SoCal looking to see the Mako Shark in person. On friday my dealer told me about 3 dealers within 150 miles that showed it in stock. Doesn't do any good to call them because they will just lie and say its there to get you in then try and sell something in stock so figured since they were there Friday one had to have it. Nope, all 3 were sold. 2 of the 3 said it wasn't in stock for hours as many of the sales guys had a list to call when it showed up since seems like none of these guys take deposits.
I see some of you post pics of them at various dealerships so not sure whats going on in SoCal. One sales guy said they sold it for 47K which he was trying to convince me was below market value. Didn't want to argue with him but told him I thought his perception of "market value" may be a bit warped.
2 nd weekend I have tried this, will just wait for mine..
Title: What did you do to or on your CVO today?
Post by: swhalen on September 24, 2018, 06:37:37 PM
I turned it into an Ultra


Sent from my iPhone using Tapatalk(https://uploads.tapatalk-cdn.com/20180925/44903cb749e59bb30c0b600d8aad587a.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on September 24, 2018, 07:17:20 PM
Rode all over SoCal looking to see the Mako Shark in person. On friday my dealer told me about 3 dealers within 150 miles that showed it in stock. Doesn't do any good to call them because they will just lie and say its there to get you in then try and sell something in stock so figured since they were there Friday one had to have it. Nope, all 3 were sold. 2 of the 3 said it wasn't in stock for hours as many of the sales guys had a list to call when it showed up since seems like none of these guys take deposits.
I see some of you post pics of them at various dealerships so not sure whats going on in SoCal. One sales guy said they sold it for 47K which he was trying to convince me was below market value. Didn't want to argue with him but told him I thought his perception of "market value" may be a bit warped.
2 nd weekend I have tried this, will just wait for mine..
over the weekend I saw two in Omaha NE.... your going to like I would say  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on September 25, 2018, 12:44:19 AM
over the weekend I saw two in Omaha NE.... your going to like I would say  :2vrolijk_21:
I finally saw one and absolutely love it!
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on September 25, 2018, 06:50:12 AM
I turned it into an Ultra


Well done... :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: CJ CYCLE on September 25, 2018, 10:26:40 PM
Ran the cord under the fuel tank (removed fuel tank) for the PowerVision.  Insalled perch mounts for I-phone & PowerVision. 
Title: Re: What did you do to or on your CVO today?
Post by: winkjr on October 02, 2018, 04:28:41 PM
I went to my Harley dealer and checked this out. It was Saturday though. I like the tank emblem I’m going to try to get one on my bike.

(https://uploads.tapatalk-cdn.com/20181002/e8a5ab2f83674d439e8b421d243a66f7.jpg)(https://uploads.tapatalk-cdn.com/20181002/b5462004023c8e8cd3bef4d5c1c603f6.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: 4fun on October 05, 2018, 08:11:06 PM
Took a nice ride to Bear Mountain in NY.(https://uploads.tapatalk-cdn.com/20181006/275a72336927edc43a34a3207b22db75.jpg)(https://uploads.tapatalk-cdn.com/20181006/b180e1105c343a16b2f9181b08ca14dd.jpg)

Sent from my SM-G960U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on October 05, 2018, 10:51:51 PM
Fresh off the truck.
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on October 05, 2018, 10:53:31 PM
Got the handlebars, seat and rear suspension on today
Title: Re: What did you do to or on your CVO today?
Post by: LuvGun on October 05, 2018, 11:21:23 PM
Picked it up today  :bananarock:

Title: Re: What did you do to or on your CVO today?
Post by: LuvGun on October 05, 2018, 11:22:50 PM
.
Title: Re: What did you do to or on your CVO today?
Post by: winkjr on October 05, 2018, 11:48:45 PM
Picked it up today  :bananarock:

Nice bike I havent seen that color scheme yet. Looks good with chrome.
good luck
Title: Re: What did you do to or on your CVO today?
Post by: winkjr on October 05, 2018, 11:50:21 PM
Fresh off the truck.

sharp
Title: Re: What did you do to or on your CVO today?
Post by: winkjr on October 05, 2018, 11:51:36 PM
Got the handlebars, seat and rear suspension on today
looks good. I like the bars. thats my next move. after i save $1800
Title: Re: What did you do to or on your CVO today?
Post by: swhalen on October 07, 2018, 01:50:45 PM
Got the handlebars, seat and rear suspension on today




Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: swhalen on October 07, 2018, 01:51:34 PM
Got the handlebars, seat and rear suspension on today




Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: swhalen on October 07, 2018, 01:53:40 PM
Got the handlebars, seat and rear suspension on today
What are you running for new shocks and do they add height to the ride?
Thanks(https://uploads.tapatalk-cdn.com/20181007/94b23a0c6e99bf5a64237740dbe4c238.jpg)


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on October 07, 2018, 10:12:30 PM
What are you running for new shocks and do they add height to the ride?
Thanks(https://uploads.tapatalk-cdn.com/20181007/94b23a0c6e99bf5a64237740dbe4c238.jpg)


Sent from my iPhone using Tapatalk
Ohlins with separate oil reservoir in rear. 13 inch instead of 12 but really can't see the difference IMO. Does give you a bit more clearance before scraping. Fronts are Ohlin cartridges which don't effect height.
Title: Re: What did you do to or on your CVO today?
Post by: 09nessrg on October 07, 2018, 11:14:00 PM
What seat is that? Factory or aftermarket? if after, what manufacture?
 I'm sure that  is fullsac system, using TTS?
Title: Re: What did you do to or on your CVO today?
Post by: swhalen on October 08, 2018, 07:14:13 PM
It is a seat off the ultra street glide. Had to have it. Needed a backrest heat and a lazy boy for the wife. Happy wife happy life. I also got rear foot boards for her instead of pegs. It never stops


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on October 11, 2018, 08:26:14 PM
I think that's a Harley-Davidson seat. Sure looks much more comfortable than the stock one. Looks great Alan.   I almost pulled the trigger on the same bike last Sunday.   :nervous:      If it had that seat and the tour pack it would have been in my garage.      Stuart.
Title: Re: What did you do to or on your CVO today?
Post by: Capt.D on October 14, 2018, 11:17:37 PM
Ohlins with separate oil reservoir in rear. 13 inch instead of 12 but really can't see the difference IMO. Does give you a bit more clearance before scraping. Fronts are Ohlin cartridges which don't effect height.
What color is the tour pack? I have the same bike and am thinking about getting one for trips

Sent from my SM-N950U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: swhalen on October 15, 2018, 04:14:54 AM
It’s from the catalog. You can get it in full or chopped. Cost about$1300.00. But I put amber lights on it and will be putting integration auto locks on so will lock with the side bags. Also Harley does not include a felt linnet you will have to purchase that as well. Only comes with a rubber mat inside. Hope this helps.


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Capt.D on October 15, 2018, 05:31:09 AM
They told me they didn't think they could get it in the cvo color since they dont offer it with the bike.... they're checking and haven't gotten back to me

Sent from my SM-N950U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on October 15, 2018, 10:20:29 PM
Took delivery of my 2019 CVO Street Glide.(https://uploads.tapatalk-cdn.com/20181016/806ee74216894e5ebcadee4097184d93.jpg)(https://uploads.tapatalk-cdn.com/20181016/46768189d37ba0aebf355fcaa869dc5d.jpg)(https://uploads.tapatalk-cdn.com/20181016/fa221ce4206c1f98499295f2597ab114.jpg)(https://uploads.tapatalk-cdn.com/20181016/d9f1b6f941aff9aecfc4611a158d7a28.jpg)

Sent from my SM-N950U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: Mr D on October 15, 2018, 10:23:59 PM
Took delivery of my 2019 CVO Street Glide.(https://uploads.tapatalk-cdn.com/20181016/806ee74216894e5ebcadee4097184d93.jpg)(https://uploads.tapatalk-cdn.com/20181016/46768189d37ba0aebf355fcaa869dc5d.jpg)(https://uploads.tapatalk-cdn.com/20181016/fa221ce4206c1f98499295f2597ab114.jpg)(https://uploads.tapatalk-cdn.com/20181016/d9f1b6f941aff9aecfc4611a158d7a28.jpg)

Sent from my SM-N950U using Tapatalk

Congratulations Joe
Love the paint scheme  :2vrolijk_21:
Swap out the inner fairing mirrors for the chrome one’s... nice touch
Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on October 15, 2018, 10:28:24 PM


Congratulations Joe
Love the paint scheme  :2vrolijk_21:
Swap out the inner fairing mirrors for the chrome one’s... nice touch

Good suggestion, thanks.

Sent from my SM-N950U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on October 16, 2018, 07:41:01 AM
Great looking bike, congrats!
Title: Re: What did you do to or on your CVO today?
Post by: Phreakyz on October 16, 2018, 07:53:16 AM
Took delivery of my 2019 CVO Street Glide.

Beautiful! - I bet she is stunning to see in person! -    How about some more pics of the other side?
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on October 16, 2018, 08:53:18 AM
Good looking bike there Joe. 
Title: Re: What did you do to or on your CVO today?
Post by: OBB on October 16, 2018, 02:23:45 PM
Looks good Joe. Enjoy that beauty.

Sent from my boring Droid phone.

Title: Re: What did you do to or on your CVO today?
Post by: Phreakyz on October 16, 2018, 03:50:35 PM
Got rid of that License Plate Bracket!
Title: Re: What did you do to or on your CVO today?
Post by: swhalen on October 16, 2018, 06:41:15 PM
Nice looking bike


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: MakoCVO on October 16, 2018, 07:27:17 PM
Picked her up just a few days ago.  Can't decide if I just want to install slip ons, or do mufflers/head pipe/Tuner. 
Title: Re: What did you do to or on your CVO today?
Post by: CVO 2015 on October 16, 2018, 07:45:47 PM
That blue 2019  CVO is sexy!

Sent from my SM-N960U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: Capt.D on October 16, 2018, 11:52:55 PM
Picked her up just a few days ago.  Can't decide if I just want to install slip ons, or do mufflers/head pipe/Tuner.
I went with D&D 2 into 1 with a ghost pipe so it looks right from behind..... you wont regret it

Sent from my SM-N950U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: MakoCVO on October 17, 2018, 08:16:37 AM
I went with D&D 2 into 1 with a ghost pipe so it looks right from behind..... you wont regret it

Sent from my SM-N950U using Tapatalk

I'm only looking at options that retain the stock heat shields.  I'll ride the bike for a year or two, and then when I'm itching to trade it (because that ALWAYS seems to happen lol) I'll put a full exhaust, tuner, and work the engine a bit so it feels new.  Plus, I don't want to mess w/the bike to much until I have 3/4K miles on it, want to ensure the bike doesn't have any issues.
Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on October 17, 2018, 07:07:06 PM
Beautiful! - I bet she is stunning to see in person! -    How about some more pics of the other side?
The other side.(https://uploads.tapatalk-cdn.com/20181017/6771727f20d9e4dc10f35f3525145415.jpg)(https://uploads.tapatalk-cdn.com/20181017/5bff64d67ffb34b6033b8ea2d211ec26.jpg)(https://uploads.tapatalk-cdn.com/20181017/884fb7a07952be545cece2c03bb47423.jpg)

Sent from my SM-N950U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: Cat Eye on October 18, 2018, 05:27:22 PM
Went for a ride.....got a flat tire....got towed....got new tire....rode some more.

$50 Road Hazard Deductable

Bike doesn’t want to turn with a flat tire.

Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on October 18, 2018, 06:46:18 PM
Went for a ride.....got a flat tire....got towed....got new tire....rode some more.

$50 Road Hazard Deductable

Bike doesn’t want to turn with a flat tire.
Dang

Sent from my SM-N950U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on October 18, 2018, 06:48:52 PM
Installed my CB, garage door opener and moved the XM antenna outside the fairing this afternoon.

Sent from my SM-N950U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: KGB on October 18, 2018, 08:20:49 PM
Went for a ride.....got a flat tire....got towed....got new tire....rode some more.

$50 Road Hazard Deductable

Bike doesn’t want to turn with a flat tire.

Must have been all that power from the new cam  :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: Cat Eye on October 18, 2018, 08:47:03 PM
Must have been all that power from the new cam  :nixweiss:

LOL.....I didn’t realize that I installed the “Tire Shredder” cams.

You better get some....the motor just runs better.....there are ribs and then there are RIBS!!! these cams are RIBS!!!
Title: Re: What did you do to or on your CVO today?
Post by: swhalen on October 18, 2018, 08:58:16 PM
Why did you move the antenna?  I have had bad receptions inside or out. Let me know what you did and how it works.  Thanks


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: swhalen on October 18, 2018, 08:59:19 PM
Installed my CB, garage door opener and moved the XM antenna outside the fairing this afternoon.

Sent from my SM-N950U using Tapatalk
Let me know if the antenna makes a difference


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on October 18, 2018, 09:08:16 PM
LOL.....I didn’t realize that I installed the “Tire Shredder” cams.

You better get some....the motor just runs better.....there are ribs and then there are RIBS!!! these cams are RIBS!!!

LOL
All the cools kids have put new tires on their awesome machines so they don't shred their tires as easily with them new cams.
Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on October 18, 2018, 09:09:56 PM
Why did you move the antenna?  I have had bad receptions inside or out. Let me know what you did and how it works.  Thanks


Sent from my iPhone using Tapatalk
Poor reception. This is my 4th FLH Rushmore bike and I've moved the antenna on every one. Works great putting it on the outside. (https://uploads.tapatalk-cdn.com/20181019/ada48fe8ebba875572c5f0063b0da378.jpg)

Sent from my SM-N950U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on October 18, 2018, 10:56:00 PM
Mines inside. Works great. Never had an issue with it. Stuart  :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: Phreakyz on October 19, 2018, 06:41:52 AM
My '16 Street Glide Sirius/XM was terrible until I moved it outside of the fairing, then it was GREAT.     
My '19 Road Glide reception has been excellent in the stock location.
Title: Re: What did you do to or on your CVO today?
Post by: michaelokielee@yahoo.com on October 19, 2018, 07:34:18 AM
Let me know if the antenna makes a difference


Sent from my iPhone using Tapatalk
I see you got the 2019 Mako/Fade, they do not have a garage door opener feature like the Ultras have?
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on October 19, 2018, 08:26:11 AM
Mines inside. Works great. Never had an issue with it. Stuart  :nixweiss:
On the Rushmore bikes, the Road Glides get better XM reception due to where the antenna is placed in the fairing, nothing above it.  The Bat wing the antenna  is not in a good location.  Reception is much worse than the road glide.  The fix is exactly what Joe did, then it is better then the road glide.
Title: Re: What did you do to or on your CVO today?
Post by: ScottAL on October 19, 2018, 09:54:47 AM
What Dave said. On the bat wing the XM antenna is under the metal windshield trim. There is not a really good location inside the fairing to move it to. The spot beside the vent works great in my opinion. On the road glides there is plenty of room inside the fairing to find a good spot not blocked by metal. Another thing I have found is the Whim bluetooth will degrade the XM signal if you get the antenna to close to the Whim unit.
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on October 19, 2018, 06:38:34 PM
I know, not a CVO but this came in a few days ago.
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on October 19, 2018, 06:43:46 PM
I know, not a CVO but this came in a few days ago.
The BMW dealer has never had anyone do the mods I have them doing. They keep telling me what a "Harley Guy" I am with all my "stuff". This was yesterday, picking it up today at 5.
Title: Re: What did you do to or on your CVO today?
Post by: King Glide on October 19, 2018, 06:52:28 PM
Leaving home tomorrow for eureka springs, on to day trips to oaklahoma hills and the southern Missouri. In preparation had new tires put on and yellington mechanical reverse pulley. The pulley works awesome, wasn’t quite as easy to install and adjust as the website says but still much easier than the internal transmission gear types.
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on October 19, 2018, 07:13:55 PM
I know, not a CVO but this came in a few days ago.
Congrats!! :2vrolijk_21:

As much trouble as you've had with CVO's/H-D's can't blame you for getting another brand for a back up.

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on October 19, 2018, 07:33:19 PM
Great looking CVO to me  ;D .
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on October 20, 2018, 03:18:38 AM
Congrats!! :2vrolijk_21:

As much trouble as you've had with CVO's/H-D's can't blame you for getting another brand for a back up.

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Did about a 100 mile "ride home" after taking delivery. No idea how to work it but DA-- its fast!! Already scheduled my 600 mile first service for Tuesday (closed on Monday), going to be a fun weekend! Nice to not have to worry about it sumping before I get it broke in..
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on October 20, 2018, 08:30:09 AM
Very nice Alan.  Enjoy the new bike.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on October 20, 2018, 09:38:16 AM
I know, not a CVO but this came in a few days ago.
Garage must be getting crowded. If that Maple is going anywhere at a steal of a price......  ;D
Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on October 20, 2018, 08:11:08 PM
I know, not a CVO but this came in a few days ago.
Sweet!

Sent from my SM-N950U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: swhalen on October 20, 2018, 08:22:34 PM
Poor reception. This is my 4th FLH Rushmore bike and I've moved the antenna on every one. Works great putting it on the outside. (https://uploads.tapatalk-cdn.com/20181019/ada48fe8ebba875572c5f0063b0da378.jpg)

Sent from my SM-N950U using Tapatalk
Thanks for the picture. You say it works a lot better?


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: swhalen on October 20, 2018, 08:24:22 PM
Agreed if you live or ride in a lot of open area. Mine breaks up anywhere riding around tall trees or buildings. I really do like the radar option


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: swhalen on October 20, 2018, 08:31:24 PM
I see you got the 2019 Mako/Fade, they do not have a garage door opener feature like the Ultras have?
I now. I got caught up with the new bike. Traded in my cvo ultra and then built an ultra like I had out of it.  Seat was hard and needed heated grips e everything my other bike had. I bit the bullet but was disappointed that a touring bike came without a real windshield (smaller than dash) no heated grips or seat and no slot in seat for a riders back rest. Don’t get me wrong I now love the bike just cost me $7000.00 to get there


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on October 20, 2018, 11:26:54 PM
Thanks for the picture. You say it works a lot better?


Sent from my iPhone using Tapatalk
Much better than under the fairing.

Sent from my SM-N950U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on October 21, 2018, 12:01:40 AM
Garage must be getting crowded. If that Maple is going anywhere at a steal of a price......  ;D
oh no, that is my "first born" in the touring world for me..
Title: Re: What did you do to or on your CVO today?
Post by: michaelokielee@yahoo.com on October 21, 2018, 07:45:49 AM
Traded her in for a 2019! :pepper:
Title: Re: What did you do to or on your CVO today?
Post by: T-Roy on October 21, 2018, 07:51:24 AM
Traded her in for a 2019! :pepper:

That 2019 model in the tank top is very nice. Did the previous model wear ballcaps also?

Just joking!!!
Beautiful bike. Congrats!!
Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on October 21, 2018, 06:05:41 PM
Traded her in for a 2019! :pepper:
Beautiful bike! Enjoy!

Sent from my SM-N950U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on October 21, 2018, 10:20:38 PM
That 2019 model in the tank top is very nice. Did the previous model wear ballcaps also?

Just joking!!!
Beautiful bike. Congrats!!
that is funny!
Title: Re: What did you do to or on your CVO today?
Post by: Grizzly on October 22, 2018, 12:28:16 AM
Traded her in for a 2019! :pepper:

Will they let you trade back the bike for her?  The new bike is awesome, but C'mon Man!

I'm sure they'll both keep you smiling, as I trust this note does.   ;D

Congrats on your new purchase
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on October 23, 2018, 11:21:16 AM
While on vacation last week, I stopped in Lake Havasu Az. at Fullsac and had Steve tune up my bike. Really had a great time visiting with him and Sheri and of course excellent service.
Title: Re: What did you do to or on your CVO today?
Post by: LuvGun on October 25, 2018, 03:47:24 PM
Got a new Klock Werks windshield at Daytona
Title: Re: What did you do to or on your CVO today?
Post by: CJ CYCLE on October 26, 2018, 12:35:26 AM
Put another set of new Kahuna heated grips on my 2018 CVO Road Glide.  2nd set now.  Hope they work!!!
Title: Re: What did you do to or on your CVO today?
Post by: Phreakyz on October 26, 2018, 06:10:07 AM
Got a new Klock Werks windshield at Daytona
That one looks pretty short!   How does it work?    Which one is it?
Title: Re: What did you do to or on your CVO today?
Post by: LuvGun on October 26, 2018, 09:20:50 AM
It's the 6" super low. You still get some wind but not buffeting. I could hardly hear the music before. Now I can hear ok, with just some wind that feels like it's flowing by you. I'm sure the taller the shield the better but I don't like the look of a tall one. I'm 5'10" if that helps.
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on October 26, 2018, 09:39:53 AM
Got a new Klock Werks windshield at Daytona

I'm a taller windscreen type guy but dang it, that small Klock Werks shore do look good on da bike, Luv.  Glad you like....the bike ain't too shabby, either... :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: LuvGun on October 26, 2018, 09:41:23 AM
Thanks
Title: Re: What did you do to or on your CVO today?
Post by: swhalen on October 27, 2018, 05:25:29 PM
I now. I got caught up with the new bike. Traded in my cvo ultra and then built an ultra like I had out of it.  Seat was hard and needed heated grips e everything my other bike had. I bit the bullet but was disappointed that a touring bike came without a real windshield (smaller than dash) no heated grips or seat and no slot in seat for a riders back rest. Don’t get me wrong I now love the bike just cost me $7000.00 to get there


Sent from my iPhone using Tapatalk
I just added an oil cooler fan. Think it will work great next summer when it gets hot. All the police bike are getting them and I heard it will keep the temp down 50 degrees. Easy install but dealer needs to flash ecm


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on October 27, 2018, 07:13:22 PM
I just added an oil cooler fan. Think it will work great next summer when it gets hot. All the police bike are getting them and I heard it will keep the temp down 50 degrees. Easy install but dealer needs to flash ecm


Sent from my iPhone using Tapatalk


Good for you...if you have TTS you can do it yourself.
Title: Re: What did you do to or on your CVO today?
Post by: swhalen on October 27, 2018, 09:23:35 PM

Good for you...if you have TTS you can do it yourself.
If you want to do that “good for you”. I don’t have time or background to mess with that stuff. I leave that to the pros


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: michaelokielee@yahoo.com on October 28, 2018, 08:36:28 PM
Added 14” Windvest and put another 150 miles on her!
Title: What did you do to or on your CVO today?
Post by: swhalen on October 29, 2018, 06:25:24 PM
How do you like the shield. I tried a Klock works 14 and it did nothing for me. Ended up going back to a stock 14” windshield I had on my 16 RG which has good protection going down the road. How is the wind vest


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: swhalen on October 29, 2018, 06:27:25 PM
Looks good but has very little protection. You like what you like. Looks very cool no doubt


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on November 03, 2018, 12:00:33 PM
Replaced the chrome heat shields with the black onyx ones. Added the rider backrest and replaced the chrome levers with the oberon ones.(https://uploads.tapatalk-cdn.com/20181103/693a0cea6eca07849218fb208c6a8c35.jpg)(https://uploads.tapatalk-cdn.com/20181103/cabbc136aa50276980a261116f19d202.jpg)(https://uploads.tapatalk-cdn.com/20181103/121c770c57228fcc4e0a1b882116f0d6.jpg)(https://uploads.tapatalk-cdn.com/20181103/ed3130aef2586c3829fa7e6398d0f4c2.jpg)(https://uploads.tapatalk-cdn.com/20181103/992701330d36fec08ad8f192717034f1.jpg)(https://uploads.tapatalk-cdn.com/20181103/65c112d00301692e2e51954e49c2c0ec.jpg)

Sent from my SM-N950U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: lyn.husen on November 03, 2018, 12:55:22 PM
Clay bar’d, paint sealant & 2 coats of carnuba on it & am getting ready to install adjustable inner faring mount so I can add the freshly painted vivid black lowers that I recently bought.(https://uploads.tapatalk-cdn.com/20181103/1e91931e7001dba668fa0471041a21ef.jpg)(https://uploads.tapatalk-cdn.com/20181103/67ac3396eca3a164cb7426d01f7247d6.jpg)


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on November 03, 2018, 01:10:53 PM
Lookin good. That's a lot of work and you're gonna love the lowers.
Title: Re: What did you do to or on your CVO today?
Post by: winkjr on November 03, 2018, 03:28:44 PM
I did a quick cleaning and took it  for gas. We have a Veterans Day parade tomorrow.


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on November 03, 2018, 11:51:15 PM
still waiting for CA to approve the stage 4 but went to dealer and took first ride. Dealer took some pics (I forgot my phone) which don't do it justice. I think it may be the best looking Harley I have ever seen. Yea, obviously I am a tad jaded and can't wait to pick it up after stage 4 done!
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on November 03, 2018, 11:52:28 PM
still waiting for CA to approve the stage 4 but went to dealer and took first ride. Dealer took some pics (I forgot my phone) which don't do it justice. I think it may be the best looking Harley I have ever seen. Yea, obviously I am a tad jaded and can't wait to pick it up after stage 4 done!
never learned how to post multiple pics.
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on November 03, 2018, 11:54:34 PM
never learned how to post multiple pics.
another
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on November 04, 2018, 12:03:50 AM
Custom Dynamics bag lights
Title: Re: What did you do to or on your CVO today?
Post by: OBB on November 04, 2018, 07:21:17 AM
never learned how to post multiple pics.
You can't unless you use offsite hosting and then copy the links into your post.

Bike's looking good.  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on November 04, 2018, 05:24:46 PM
Yesterday I rode our dearly departed friend Otis 2005 Banana to its new home at Kenny the Counselors house. Today I installed chrome switch housings on Orange Crush the took her for a shakedown run to make sure everything still worked correctly.
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on November 04, 2018, 08:19:26 PM
New tires for the CVO Ultra Road Glide. Michelin Commander 2s. Can't beat the ride and they last forever. 17000 miles finally went for new pair.
Title: Re: What did you do to or on your CVO today?
Post by: michaelokielee@yahoo.com on November 05, 2018, 06:18:28 AM
Finally got the Highway Pegs installed. :pepper:
Title: Re: What did you do to or on your CVO today?
Post by: Phreakyz on November 05, 2018, 08:43:58 AM
Custom Dynamics bag lights
Are those the sequential CD lights?
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on November 05, 2018, 11:16:27 PM
Are those the sequential CD lights?
Yes, work great. Also have the CD unit that flashes them with the brake lights when I hit them.
Title: Re: What did you do to or on your CVO today?
Post by: CVODON on November 06, 2018, 10:41:21 AM
I like the way you say the HD tech's are pro's. Hum... might disagree with you there. The Windvest shields are the best in my opinion. I have, like others, bought several different windshields but find the Windvest that Is just tall enough for me to look over offers the best protection.
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on November 06, 2018, 08:20:30 PM
Replaced my restrictive a/c...... Thanks Michael!

Title: Re: What did you do to or on your CVO today?
Post by: LuvGun on November 07, 2018, 05:23:04 PM
Replaced my restrictive a/c...... Thanks Michael!


Looks good  :biggthumpup:
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on November 07, 2018, 07:52:53 PM
Thanks, more clearance than I expected (obviously the glove box is worthless now) and it looks like speakers should not be an issue, even though Harley says no go. Any thoughts anyone?
Title: Re: What did you do to or on your CVO today?
Post by: LuvGun on November 08, 2018, 05:11:16 PM
Thanks, more clearance than I expected (obviously the glove box is worthless now) and it looks like speakers should not be an issue, even though Harley says no go. Any thoughts?

Sorry, no lowers on mine



Title: Re: What did you do to or on your CVO today?
Post by: michaelokielee@yahoo.com on November 09, 2018, 07:55:06 PM
Added CVObackrest and passenger backrest until the Tour Pak arrives!  :pepper:
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on November 09, 2018, 08:00:23 PM
Looks great! Can't tell you how much I have come to rely on mine.
Title: Re: What did you do to or on your CVO today?
Post by: longlast on November 10, 2018, 12:20:02 AM
Installed new rear sprocket and mounted the wheels with new Michelin Commander ll tyres on today.
Title: Re: What did you do to or on your CVO today?
Post by: Davestune on November 10, 2018, 07:51:19 AM
k&n air filter for mine
Title: Re: What did you do to or on your CVO today?
Post by: Wunderkind on November 10, 2018, 03:15:22 PM
Gave the old Lady with the now strong running 110 cui engine (Water???, sumping???)  :P a big hug! And a new 8" tinted waved windshield.

Fact: Winter can come over here around the Green Hell. No strong wind upon my nose with my open Helmet anymore. Nearly started sweating on my Testride at Temperatures around 45 degrees today.........

After 40 years in the unblocked wind I appreciated the comfort for this autumn day.
Title: Re: What did you do to or on your CVO today?
Post by: Phreakyz on November 10, 2018, 07:09:02 PM
LOL! :).    I feel the same way in Ohio this time of year!
Title: Re: What did you do to or on your CVO today?
Post by: CVO 2015 on November 10, 2018, 07:25:43 PM
Added a new tail light to the detachable tour pack of my 2015 CVO, however, the dealer could only rig the wiring harness to light up in the center vs all the way across when the running lights are on...Anyone know of a reputable spot that can fix it in So. California?

Sent from my SM-N960U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: kevin_n on November 11, 2018, 04:17:06 PM
Covered it up for the cold long winter :-\
Title: Re: What did you do to or on your CVO today?
Post by: knothead on November 11, 2018, 06:07:24 PM
Cleaned up the cave...
Title: Re: What did you do to or on your CVO today?
Post by: BostonboyDH on November 12, 2018, 05:50:10 PM

  Changed the oil,  full tank of gas with Star-tron fuel stabilizer, Romeo is down for the winter    :-X   BostonBoy
Title: Re: What did you do to or on your CVO today?
Post by: CJ CYCLE on November 12, 2018, 09:28:13 PM
Installed new saddlebag inserts purchased from Puzzled today and.......
Title: Re: What did you do to or on your CVO today?
Post by: CJ CYCLE on November 12, 2018, 09:30:00 PM
......and installed the Bar & Shield tank badges purchased from Mark Morris on FB today.
Title: Re: What did you do to or on your CVO today?
Post by: CJ CYCLE on November 12, 2018, 09:35:19 PM
A picture of my 2018 CVO with mods.  Stage I:  S&S headers, V&H 4.5" HO slip ons,  Arlen Ness Big Air Sucker, DynoJet PowerVision. 
Title: Re: What did you do to or on your CVO today?
Post by: jonny cash on November 14, 2018, 02:26:54 PM
Stretched an 07 CVO RK fender to make room for the 6"over swingarm and 190 Shinko hookup tire
Title: Re: What did you do to or on your CVO today?
Post by: jonny cash on November 14, 2018, 02:28:08 PM
its kinda long.  Will post up after the painter works his magic with my sheetmetal work
Title: Re: What did you do to or on your CVO today?
Post by: Grizzly on November 16, 2018, 10:20:40 AM
its kinda long.  Will post up after the painter works his magic with my sheetmetal work

That just means you'll get to where you're going faster!  ;D
Title: Re: What did you do to or on your CVO today?
Post by: Indenial on November 17, 2018, 08:20:42 AM
We always need a project-------------------nice job
Title: Re: What did you do to or on your CVO today?
Post by: Phreakyz on December 03, 2018, 10:22:00 AM
Rode It!   Temps got above 60 yesterday in Ohio and the Sun was Shining!
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on December 03, 2018, 11:24:43 PM
Got 1000 miles on for the first service-no problems. Hallelujah..
Title: Re: What did you do to or on your CVO today?
Post by: Phreakyz on December 04, 2018, 06:39:29 AM
Got 1000 miles on for the first service-no problems. Hallelujah..
The rear fender looks great without a bracket!   SMOOTH -  but where is the license plate?
Title: Re: What did you do to or on your CVO today?
Post by: MC16LTD on December 04, 2018, 10:49:32 PM
Installed my new HD Adaptive Headlight...$800 worth of brilliance if it keeps the corners lit up. :-\
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on December 04, 2018, 11:00:33 PM
The rear fender looks great without a bracket!   SMOOTH -  but where is the license plate?
waiting for my plates to come in so only have to install Yaffee plate frame which I had painted to match once.
Title: Re: What did you do to or on your CVO today?
Post by: imoo6170 on December 05, 2018, 11:58:42 PM
New S&S lifters and springs on my 2009 Springer with 22,000 klm on the clock. Old ones looked fine when the mechanic pulled them out but worthwhile doing as a precautionary measure
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on December 06, 2018, 07:10:50 AM
Took it off the tender, rolled it out of the garage, started it and ran it for about 15 minutes, rolled it back into the garage and back on the tender. 

This doctor restriction stuff is cutting into my Winter riding...best riding time during the year for me.... >:(

One good thing is it doesn't get as dirty sitting in the garage.... ::)
Title: Re: What did you do to or on your CVO today?
Post by: Phreakyz on December 06, 2018, 09:40:11 AM
One good thing is it doesn't get as dirty sitting in the garage.... ::)
Stays even cleaner with the cover on it!
Title: Re: What did you do to or on your CVO today?
Post by: 14 CVO King on December 06, 2018, 05:05:11 PM
Changed out the bars from Factory 47 Signature to FXR Division Motorwitch bars, got rid of the wide grip and made it feel more sporty.

Title: Re: What did you do to or on your CVO today?
Post by: bigC on December 18, 2018, 10:27:29 PM
Took it out for a cool afternoon ride. Sun was out and expected hi low 40's. Rode about 150 miles and decided to check out the local ski slope. Bike ran nice and cool, no heat issues :orange:
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on December 19, 2018, 07:09:51 AM
Rode it into work AMA this morning....29 at the house leaving out...man it felt good to be on two wheels... :bananarock:

Looks like I may be out of pocket for 4-6 weeks after the upcoming medical procedure so today (and maybe this Saturday) will be the last for a while... :'(

...but the Lord is good and His mercy, grace and healing are everlasting.... :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: CVO 2015 on December 19, 2018, 07:41:36 AM
Amen Haird!

Sent from my SM-N960U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: 08glide on December 19, 2018, 12:17:08 PM
Haird, praying that all goes well, speedy recovery. God's healing hands, mercy & grace is with you. hope to see you this coming year. Take care my friend . Merry Christmas,Happy New Year & God Bless.
Title: Re: What did you do to or on your CVO today?
Post by: DBinSD on December 19, 2018, 01:15:14 PM
New Klock Werks 15” Touring WS along with Ordering MANY add ons !
Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on December 19, 2018, 03:27:43 PM
Installed color matched mid frame deflectors. (https://uploads.tapatalk-cdn.com/20181219/544ef09f3391610612860a65b715e8f9.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: DBinSD on December 19, 2018, 07:03:52 PM
Installed color matched mid frame deflectors. (https://uploads.tapatalk-cdn.com/20181219/544ef09f3391610612860a65b715e8f9.jpg)
And you got them where?
Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on December 19, 2018, 07:18:36 PM
And you got them where?
New Products catalog from HD.

http://cloud.tapatalk.com/s/5c1adf9bc12d5/MY19_GMA_New_Products.pdf (http://cloud.tapatalk.com/s/5c1adf9bc12d5/MY19_GMA_New_Products.pdf)
Title: Re: What did you do to or on your CVO today?
Post by: LuvGun on December 20, 2018, 05:49:25 PM
Installed color matched mid frame deflectors. (https://uploads.tapatalk-cdn.com/20181219/544ef09f3391610612860a65b715e8f9.jpg)
Me too
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on December 24, 2018, 08:25:08 AM
Traded my 2018 Gunship Gray Road Glide.  Had 23940 miles on the bike.

(http://www.cvoharley.com/smf/gallery/6353_24_12_18_8_02_36.jpeg)

Took delivery of my 2019 Red Pepper Road Glide.  Had bars swapped, Kahuna heated CVO Grips added, Ness mirrors, and Hand guards.  Also paint matched mid frame deflectors.

(http://www.cvoharley.com/smf/gallery/6353_24_12_18_8_05_15.jpeg)

(http://www.cvoharley.com/smf/gallery/6353_24_12_18_8_10_11.jpeg)
Title: What did you do to or on your CVO today?
Post by: lyn.husen on December 24, 2018, 08:53:36 AM
Replaced 2 channel amp with 4 channel & speaker pods to the lowers on my 09 FLTRSE3


Sent from my iPhone using Tapatalk(https://uploads.tapatalk-cdn.com/20181224/c4637fab3c4778d4c60c08991edad034.jpg)(https://uploads.tapatalk-cdn.com/20181224/6a31b07d0910f53eb526aab57b6dcde2.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on December 24, 2018, 10:31:06 AM
Traded my 2018 Gunship Gray Road Glide.  Had 23940 miles on the bike.

Took delivery of my 2019 Red Pepper Road Glide.  Had bars swapped, Kahuna heated CVO Grips added, Ness mirrors, and Hand guards.  Also paint matched mid frame deflectors.

Very nice, Dave.  Congratulations.  I know you liked the battleship grey but that Red Pepper looks much nicer to me. 

No offense to those that still have the battleship gray but to me that was not one of my favorite colors... ;D
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on December 25, 2018, 08:24:21 AM
Very nice, Dave.  Congratulations.  I know you liked the battleship grey but that Red Pepper looks much nicer to me. 

No offense to those that still have the battleship gray but to me that was not one of my favorite colors... ;D

Honestly I really loved the Gunship Gray.  Only bike that ever got more compliments was my Skunk.  Time will tell if these beats the Gunship for compliments.

Well, I added the Klock Werks 14" Sport Flair and riders back rest.  Then rode the new bike on the new section of Foothills Parkway, first time on it and on the bike.  Rode the old part too.  179 miles of mostly curves yesterday.

(http://www.cvoharley.com/smf/gallery/6353_25_12_18_8_05_16.jpeg)
Title: Re: What did you do to or on your CVO today?
Post by: CVO 2015 on December 25, 2018, 11:00:00 AM
Dave,

Nice Red Pepper CVO!

What type of bars did you put on it?

Sent from my SM-N960U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: Powermaker on December 25, 2018, 12:07:32 PM
Honestly I really loved the Gunship Gray.  Only bike that ever got more compliments was my Skunk.  Time will tell if these beats the Gunship for compliments.

Well, I added the Klock Werks 14" Sport Flair and riders back rest.  Then rode the new bike on the new section of Foothills Parkway, first time on it and on the bike.  Rode the old part too.  179 miles of mostly curves yesterday.

(http://www.cvoharley.com/smf/gallery/6353_25_12_18_8_05_16.jpeg)

Nice scoot! You happy with that shield?
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on December 25, 2018, 12:38:57 PM
Congrats Dave.    Looks great.  Enjoy the new ride.   Stuart 😊
Title: Re: What did you do to or on your CVO today?
Post by: Phreakyz on December 25, 2018, 02:52:57 PM
Riding on  Christmas, an Ohio boy’s dream!
Title: Re: What did you do to or on your CVO today?
Post by: bbrown on December 26, 2018, 12:03:41 AM
Riding on  Christmas, an Ohio boy’s dream!


Nice... and Palm Trees Too
Title: Re: What did you do to or on your CVO today?
Post by: smkymtnboy on December 26, 2018, 06:54:58 PM
Riding on  Christmas, an Ohio boy’s dream!
nice ridin!! enjoy!
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on December 27, 2018, 08:35:53 AM
Dave,

Nice Red Pepper CVO!

What type of bars did you put on it?

Sent from my SM-N960U using Tapatalk
Bars are Paul Yaffe Monkey Bars, 14"  I find them very comfortable.  Have them on my 13 CVO King also, and had them on a few other bikes.

Congrats Dave.    Looks great.  Enjoy the new ride.   Stuart 😊

Thanks.  I have been enjoying it the last couple days.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on December 27, 2018, 08:41:02 AM
Rode it again, a nice 246 miles yesterday on the back roads of East TN, all twisty curvy roads, stopped at Bald River Falls for a bit. 

(http://www.cvoharley.com/smf/gallery/6353_27_12_18_8_37_28.jpeg)

(http://www.cvoharley.com/smf/gallery/6353_27_12_18_8_38_12.jpeg)
Title: Re: What did you do to or on your CVO today?
Post by: Powermaker on December 27, 2018, 10:35:31 AM
Just finished installing my 12" Factory 47's

Title: Re: What did you do to or on your CVO today?
Post by: Powermaker on December 27, 2018, 10:36:11 AM
Just finished installing my 12" Factory 47's
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on December 28, 2018, 09:15:43 AM
Took a 112 round trip ride to Smoky Mountain Harley to have them switch the PTT and Cruise buttons so that Cruise is on the right and PTT on the left.
Title: Re: What did you do to or on your CVO today?
Post by: Tail Rider on December 29, 2018, 07:39:02 AM
Took a 112 round trip ride to Smoky Mountain Harley to have them switch the PTT and Cruise buttons so that Cruise is on the right and PTT on the left.
8) I'd actually thought some of that...horn button is in a awkward spot as well
Title: Re: What did you do to or on your CVO today?
Post by: Phreakyz on December 29, 2018, 10:20:43 AM
Rode it again, a nice 246 miles yesterday on the back roads of East TN, all twisty curvy roads, stopped at Bald River Falls for a bit. 

Sweet pic with the falls in the background!  Mid frame deflectors look good as well!    Never considered the colored ones but after this pic I might.   
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on December 30, 2018, 07:42:39 AM
Sweet pic with the falls in the background!  Mid frame deflectors look good as well!    Never considered the colored ones but after this pic I might.   

Thanks.  I saw the color matched in the 19 parts book.  I'm really glad I added them, ties the tank to the side cover. 


Busy day Friday. 

Installed CB module, soldered in Garage door opener, ran CB cable though main harness to rear for Antenna, installed 4-point docking hard ware, installed Yaffe Plate Frame. Installed holster holder and holster. Removed passenger pegs and installed them as hwy pegs, covered saddle bag reflectors and removed for reflectors.  Installed cup holder.

Then Saturday was a great Ride to Ellijay GA for lunch at the Cajun Depot.  Went down 411, then over 52/2 to Ellijay, back home up 68.  Rode a nice 299 miles.  On 52/2 Going over Fort Mountain we were above the clouds really cool looking.

(http://www.cvoharley.com/smf/gallery/6353_30_12_18_7_40_50.jpeg)

(http://www.cvoharley.com/smf/gallery/6353_30_12_18_7_41_23.jpeg)
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on December 31, 2018, 07:27:29 AM
Got the 1000 mile service done on the bike.
Title: Re: What did you do to or on your CVO today?
Post by: smkymtnboy on December 31, 2018, 09:33:32 AM
Thanks.  I saw the color matched in the 19 parts book.  I'm really glad I added them, ties the tank to the side cover. 


Busy day Friday. 

Installed CB module, soldered in Garage door opener, ran CB cable though main harness to rear for Antenna, installed 4-point docking hard ware, installed Yaffe Plate Frame. Installed holster holder and holster. Removed passenger pegs and installed them as hwy pegs, covered saddle bag reflectors and removed for reflectors.  Installed cup holder.

Then Saturday was a great Ride to Ellijay GA for lunch at the Cajun Depot.  Went down 411, then over 52/2 to Ellijay, back home up 68.  Rode a nice 299 miles.  On 52/2 Going over Fort Mountain we were above the clouds really cool looking.

(http://www.cvoharley.com/smf/gallery/6353_30_12_18_7_40_50.jpeg)

(http://www.cvoharley.com/smf/gallery/6353_30_12_18_7_41_23.jpeg)
pretty cool pics!! ridin in mtns is always nice! thanks for sharing.
Title: Re: What did you do to or on your CVO today?
Post by: cmashark on January 01, 2019, 09:29:23 PM
Grabbed a short new year’s day ride...
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on January 02, 2019, 08:51:09 AM
Did a nice New Years Day lunch ride with a bunch of bikes, then 7 of us continued for a nice ride in the hills of East TN.  A 192 mile ride for me.  Packing up to head off for work for 21 days now.  So I'll be hooking up the battery tender.
Title: Re: What did you do to or on your CVO today?
Post by: CHH_Badkarma on January 03, 2019, 08:10:10 PM
Gave the girl an oil change.

Do ya think the dealer used enough thread sealant last time I was in  :wideeyed:

(https://farm5.staticflickr.com/4820/45678391135_72f3bc666c_z.jpg) (https://flic.kr/p/2cArGgR) (https://flic.kr/p/2cArGgR)
Title: Re: What did you do to or on your CVO today?
Post by: Phreakyz on January 03, 2019, 09:59:52 PM
The o ring should be all you need?   No thread sealant!??
Title: Re: What did you do to or on your CVO today?
Post by: CHH_Badkarma on January 03, 2019, 11:29:31 PM
Indeed. I mean, I have seen a dab used at the base by orings before but it looks like they dipped the whole drain plug in a tub of sealant lol
Title: Re: What did you do to or on your CVO today?
Post by: Critical on January 07, 2019, 07:56:42 PM
Got rid of that License Plate Bracket!

Where'd you get the color matched mount?
Title: Re: What did you do to or on your CVO today?
Post by: Phreakyz on January 07, 2019, 08:06:20 PM
Where'd you get the color matched mount?

http://www.baggernation.com/item.php?iid=239 (http://www.baggernation.com/item.php?iid=239)

Might be able to get it cheaper elsewhere.   Then have it painted to match.
Title: Re: What did you do to or on your CVO today?
Post by: CVO 2015 on January 09, 2019, 09:55:55 PM
Received my TTS 150 cams from Steve at Fullsacs Performance. (https://uploads.tapatalk-cdn.com/20190110/a83dec1ef33d58da2a1bcd3cfa47cc25.jpg)

Sent from my SM-N960U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: Critical on January 09, 2019, 10:01:01 PM
http://www.baggernation.com/item.php?iid=239 (http://www.baggernation.com/item.php?iid=239)

Might be able to get it cheaper elsewhere.   Then have it painted to match.

Thanks - looks great!
Title: Re: What did you do to or on your CVO today?
Post by: Phreakyz on January 10, 2019, 06:44:52 AM
Not sure what your bike is but if it is Lightning Silver I might be able to give you a tip...
Title: Re: What did you do to or on your CVO today?
Post by: Critical on January 10, 2019, 12:11:06 PM
Not sure what your bike is but if it is Lightning Silver I might be able to give you a tip...

Sort of... 2019 Street Glide CVO - Charred Steel and Lightning Silver.  The rear fender is charred steel.
Title: Re: What did you do to or on your CVO today?
Post by: Phreakyz on January 10, 2019, 01:55:29 PM
Sort of... 2019 Street Glide CVO - Charred Steel and Lightning Silver.  The rear fender is charred steel.
I have a paint code that is an excellent match for the Lightning Steel however your bike is basically the opposite scheme from the Road Glides.   I assume that you would want the License Plate bracket Charred Steel.     I am sure that a good body shop can match it up.     Many of the bigger body shops have a device called a Spectrophotometer,  PPG calls theirs a "Prophet"    It is basically a high quality scanner that pulls up the formula for a paint code.    They would place it on the Charred Steel portion and scan it and then it spits out a formula to mix it from the pigments in their paint room. 

The brackets really do clean up the rear end on a domestic bike creating a clean "Waterfall" look on the rear fender.

Zak
Title: Re: What did you do to or on your CVO today?
Post by: 14 CVO King on January 10, 2019, 02:03:29 PM
Not sure what your bike is but if it is Lightning Silver I might be able to give you a tip...

What paint did you use to match the Lightning Silver?
Title: Re: What did you do to or on your CVO today?
Post by: Critical on January 10, 2019, 04:22:35 PM
I have a paint code that is an excellent match for the Lightning Steel however your bike is basically the opposite scheme from the Road Glides.   I assume that you would want the License Plate bracket Charred Steel.     I am sure that a good body shop can match it up.     Many of the bigger body shops have a device called a Spectrophotometer,  PPG calls theirs a "Prophet"    It is basically a high quality scanner that pulls up the formula for a paint code.    They would place it on the Charred Steel portion and scan it and then it spits out a formula to mix it from the pigments in their paint room. 

The brackets really do clean up the rear end on a domestic bike creating a clean "Waterfall" look on the rear fender.

Zak

Thanks, Zak!  The paint code for the Lightning Silver will definitely come in handy, so please do share.
Title: Re: What did you do to or on your CVO today?
Post by: Phreakyz on January 11, 2019, 06:51:19 AM
What paint did you use to match the Lightning Silver?

Well I stumbled on it completely by accident.  When I brought the new bike home and had it all cleaned up outside in the sunshine...    It was parked next to my 2017 Ford Escape.   The metal flake, color, everything was dead on.     The texture was a little different but that is because Harley color sands and buffs the finishes smooth and Ford did not.   I checked it over and over in different lightings and it looked good.    So I had my Yaffe Bracket finished 2017 Ford Color Code: UX/M7226   Ingot Silver Metallic.    Worked out great.

Title: Re: What did you do to or on your CVO today?
Post by: longlast on January 11, 2019, 08:02:11 PM

   Installed a front and rear  camera

Title: Re: What did you do to or on your CVO today?
Post by: longlast on January 11, 2019, 08:03:46 PM

  The rear sits under the TP nicely
Title: Re: What did you do to or on your CVO today?
Post by: DBinSD on January 11, 2019, 09:56:14 PM
Received my TTS 150 cams from Steve at Fullsacs Performance. (https://uploads.tapatalk-cdn.com/20190110/a83dec1ef33d58da2a1bcd3cfa47cc25.jpg)

Sent from my SM-N960U using Tapatalk
What else are you changing?
Title: Re: What did you do to or on your CVO today?
Post by: CVO 2015 on January 11, 2019, 10:53:31 PM
DBinSD

I also have a 2012 Roadglide that I am finishing some stereo upgrades (2 Fosgate amps) on.  When I finish with my 2012 or " if something happens to my 2015 CVO under ESP" I will change out my SE 585 cams and send my heads to Don at HDSP in Washington and let him 0 deck them, put his sport performance headwork and change valve springs like he did on my 2012 Roadglide ...Then I will dyno tune it and be "happy" for now..

Sent from my SM-N960U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: Critical on January 13, 2019, 03:23:49 AM
Just picked up a 2019 FLHXSE.  Added a color-matched, quick-detach King Tour Pak with lighting, luggage rack, speakers and a remote lock; CVO heated tour seat; Freedom Shield; highway pegs; garage door opener (not the $140 MoCo one); V&H headers, Neighbor Hater mufflers and tuned it; setup the headset; and connected the wireless remote module for my Gerbing clothing.  Oh - and the kids named her Harley-quinn (after the super hero).

If anyone is interested in how I setup the garage door opener to operate by flashing the lights for $34 in parts, hit me up and I'll be happy to share the details.  It's really easy.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on January 13, 2019, 09:10:33 AM
Just picked up a 2019 FLHXSE.  Added a color-matched, quick-detach King Tour Pak with lighting, luggage rack, speakers and a remote lock; CVO heated tour seat; Freedom Shield; highway pegs; garage door opener (not the $140 MoCo one); V&H headers, Neighbor Hater mufflers and tuned it; setup the headset; and connected the wireless remote module for my Gerbing clothing.  Oh - and the kids named her Harley-quinn (after the super hero).

If anyone is interested in how I setup the garage door opener to operate by flashing the lights for $34 in parts, hit me up and I'll be happy to share the details.  It's really easy.

Gotta do it  :P

 :worthless:
Title: Re: What did you do to or on your CVO today?
Post by: Phreakyz on January 13, 2019, 10:08:04 AM
Just picked up a 2019 FLHXSE.  Added a color-matched, quick-detach King Tour Pak with lighting, luggage rack, speakers and a remote lock; CVO heated tour seat; Freedom Shield; highway pegs; garage door opener (not the $140 MoCo one); V&H headers, Neighbor Hater mufflers and tuned it; setup the headset; and connected the wireless remote module for my Gerbing clothing.  Oh - and the kids named her Harley-quinn (after the super hero).

If anyone is interested in how I setup the garage door opener to operate by flashing the lights for $34 in parts, hit me up and I'll be happy to share the details.  It's really easy.

Yes please and how about some pics of the bike??
Title: Re: What did you do to or on your CVO today?
Post by: Critical on January 13, 2019, 05:50:54 PM
Sorry, folks!  I know, I know... no pics = it didn't happen/doesn't exist.  Here you go:

Title: Re: What did you do to or on your CVO today?
Post by: Critical on January 13, 2019, 05:51:47 PM
#2
Title: Re: What did you do to or on your CVO today?
Post by: Critical on January 13, 2019, 05:52:20 PM
#3
Title: Re: What did you do to or on your CVO today?
Post by: Critical on January 13, 2019, 05:52:46 PM
#4
Title: Re: What did you do to or on your CVO today?
Post by: 68 XLCH on January 13, 2019, 07:59:17 PM
Nice bike and pictures Critical
Title: Re: What did you do to or on your CVO today?
Post by: Critical on January 13, 2019, 10:12:24 PM
For the garage door opener (GDO), here's how it's done on touring models (I believe it will still work on other bikes, but I THINK the AUX port I describe in Step 2 below is under the seat).  I searched high and low for some detailed instructions on how to set this up and didn’t find anything useful, so I’m hoping this helps a lot of other folks like me.  It works perfect and I couldn’t be happier with the results!

PARTS
An extra GDO that you do not mind soldering to.
AutoSwitch Relay: https://goo.gl/BCh9XT (https://goo.gl/BCh9XT) - $30
1 Wire Tap Connector (included with the AutoSwitch) - $0
1 Two-Position Connector Plug (p/n 73152-96BK): https://goo.gl/HqR66Q (https://goo.gl/HqR66Q) - $3
2 Electrical Contacts (p/n 73191-96): https://goo.gl/xwwvMK (https://goo.gl/xwwvMK) - $2
[The connector plug and crimp contacts are available at your local MoCo dealer.  Tax included, mine were $4.39.]

ADDITIONAL PARTS (If you're anal like me...)
Zip Ties (I've got thousands laying around) - $0
Double-sided 3M VHB Tape 5952 (again, had a role laying around).  Velcro will also work. - $0
Shrink wrap (plenty in my electrical tool box) - $0

TOOLS
Torx 25
Torx 27
Soldering Supplies
Wire cutter/stripper/crimper
Drill and a small drill bit

Step 1 - Modify The Remote
 - Open your GDO and separate the cover and the circuit board.
 - Identify the contacts on the circuit board that activate the door you want to open.  I confirmed this with a piece of scrap wire that I used to join the two contact points.  That closed the circuit and opened the door.
 - Drill one or two small holes in the cover (depends on the layout) near the contact points you just identified.  Make sure to drill the holes in a location that allows enough room for the extra wires to lay inside when you put the remote back together.  You may want to do a quick dry fit before soldering to avoid any frustration later.
 - Feed the orange wires from the AutoSwitch through the holes in the cover with enough slack so that you can work with the wires when soldering them to the circuit board.
 - Solder one of the orange wires to one contact, and the second orange wire to the second contact.  See Image 1 below to see what mine looks like.
 - Reassemble the remote and set the assembly aside.

Step 2 - Remove the Fairing
 - Use the Torx wrenches (or bits) to remove your fairing.  Disconnect the lighting connector(s) and set the fairing aside.
 - Locate the black, 2-pin auxiliary connector (on the bike, not inside the fairing) just above and to the brake side of the radio.  See Image 2 below.  It is an ‘extra’ so there shouldn't be anything plugged into it.  NOTE: the black wire is ground, and the purple wire is power – this is a switched line, so your new GDO will only work when the bike is powered on.  ANOTHER NOTE: If you have already used this plug to connect another accessory (like an onboard camera), then you will need an auxiliary splitter to create another place to plug in (p/n 69200921): https://goo.gl/hbQYBD (https://goo.gl/hbQYBD)
 - In the headlamp wire harness on the bike side, locate the high-beam wire – it’s blue with a white stripe (I believe it is the same for all the touring bikes)

Step 3 – Make Connections
 - Crimp the electrical contacts onto the power (red) and ground (black) wires from the AutoSwitch.
 - Insert the contacts into the two-position connector plug paying close attention to line up the corresponding power and ground wires with the wires in the auxiliary plug you located in Step 2.  Make sure the contacts are fully seated into the connector plug and that you lock them in place with the plastic flap on the back of the plug.
 - Now plug the AutoSwitch power connector you just made into the auxiliary plug on the bike.
 - Turn your bike on.  If done correctly so far, the LED indicator on the AutoSwitch should now be illuminated.  Turn off the bike.
 - Using the included red wire tap connector, connect the yellow wire from the AutoSwitch to the blue/white high-beam wire you located in Step 2.
 - Make sure your low beams are selected and then power up your bike.  Turn on your high-beams for about two seconds and then turn them off.  Your garage door should open and you are almost done!
 - Turn off the bike and tidy up the parts/wires.  I adhered the garage door remote and the AutoSwitch to the blank space on the radio mounting plate (clutch side of the radio), and then zip tied all the wires to the existing wire looms. 
 - If you are the type that likes to have visual confirmation that everything is working properly, you can mount the LED from the AutoSwitch somewhere visible from the driver’s seat.  The garage door opening is all the verification I need, so I just wrapped/tucked it with the rest of the wires.
 - Grab your fairing, reconnect the lighting and mount the fairing back to the bike.

Now go get yourself an adult beverage and enjoy your success!

FYI – the default setting for the AutoSwitch relay is to activate your GDO when the high-beams are switched on/off once.  You can modify the setting to require a quick, double tap of the headlamps if you prefer.  Refer to the AutoSwitch instructions on how to do that.
Title: Re: What did you do to or on your CVO today?
Post by: Critical on January 13, 2019, 10:13:07 PM
Image 1 - My Genie remote looks like this...
Title: Re: What did you do to or on your CVO today?
Post by: Critical on January 13, 2019, 10:13:51 PM
Image 2 - the auxiliary plug behind the fairing...
Title: Re: What did you do to or on your CVO today?
Post by: OBB on January 14, 2019, 06:30:05 AM
#3
#4
Sorry, folks!  I know, I know... no pics = it didn't happen/doesn't exist.  Here you go:



Good looking bike and nicely done with the extras. :2vrolijk_21:

 I don't think I'd want to see the price on that seat and backrest setup with that stitching done up to match.
Title: Re: What did you do to or on your CVO today?
Post by: Phreakyz on January 14, 2019, 06:57:47 AM
For the garage door opener (GDO), here's how it's done on touring models (I believe it will still work on other bikes, but I THINK the AUX port I describe in Step 2 below is under the seat).  I searched high and low for some detailed instructions on how to set this up and didn’t find anything useful, so I’m hoping this helps a lot of other folks like me.  It works perfect and I couldn’t be happier with the results!.... 

Nice!   That's the kinda stuff I love about this site!   Thanks for sharing!
Title: Re: What did you do to or on your CVO today?
Post by: Critical on January 14, 2019, 02:51:06 PM
Good looking bike and nicely done with the extras. :2vrolijk_21:

Thank you!

 I don't think I'd want to see the price on that seat and backrest setup with that stitching done up to match.

You are right... I don't want to see it again either.  But buy once, cry once!  And the rider's backrest is being ordered today.
Title: Re: What did you do to or on your CVO today?
Post by: Chief2505 on January 16, 2019, 09:53:13 AM
reinstalled the radio after sending it to Iron Cross for repairs and upgrades! Now to get all that wiring rezipped and tucked away and to test the radio!

Title: Re: What did you do to or on your CVO today?
Post by: jonny cash on January 20, 2019, 07:31:03 PM
I finished final assembly of the back end after stretching the arm.  Buddy of mine matched the paint and made my fender stretch look almost factory.
Title: Re: What did you do to or on your CVO today?
Post by: michaelokielee@yahoo.com on January 21, 2019, 02:58:57 PM
Added Custom Dynamics front signals to 2019 Red Pepper. :pepper:
Title: Re: What did you do to or on your CVO today?
Post by: Critical on January 21, 2019, 08:03:16 PM
Added the rider's backrest...
Title: Re: What did you do to or on your CVO today?
Post by: Critical on January 21, 2019, 08:05:18 PM
...mounted plugs for my heated gear in the mid-frame deflectors,
Title: Re: What did you do to or on your CVO today?
Post by: Critical on January 21, 2019, 08:08:11 PM
...and added Kuryakyn wind deflectors on the bat wing and lower triple trees.
Title: Re: What did you do to or on your CVO today?
Post by: fred786 on January 22, 2019, 06:31:31 AM
michaelokielee did you have to remove your fairing to get enough wire to disconnect old and connect new?  If so did you have to remove the fang spoiler to remove the top of the fairing?
I started to replace mine with CD ProBeam signal/driving lights and there was not even enough wire to disconnect the factory signal lights so I stopped the install.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on January 22, 2019, 08:54:31 AM
michaelokielee did you have to remove your fairing to get enough wire to disconnect old and connect new?  If so did you have to remove the fang spoiler to remove the top of the fairing?
I started to replace mine with CD ProBeam signal/driving lights and there was not even enough wire to disconnect the factory signal lights so I stopped the install.

You do not have to remove the fang spoiler to remove the top of the fairing.  Three bolts hold it on on each side, the lower one at the bottom of the fairing, one behind the speaker grill, and one at the turn signal, this is same for other side.  Then the windshield bolts.  Plenty of extra wire in the fairing for the turn signals.  You can un plug pull out what you need swap bulbs, then pull wire back in.  Had mine off to do CB and Garage door opener.
Title: Re: What did you do to or on your CVO today?
Post by: michaelokielee@yahoo.com on January 22, 2019, 10:06:00 AM
michaelokielee did you have to remove your fairing to get enough wire to disconnect old and connect new?  If so did you have to remove the fang spoiler to remove the top of the fairing?
I started to replace mine with CD ProBeam signal/driving lights and there was not even enough wire to disconnect the factory signal lights so I stopped the install.

I had to remove the Fairing on mine because the tech that built my bike did not give me any extra slack. I am sure it just depends on the bike, depending on the person that routed the harness for the signal. If you can pull yours out enough to see the JAE connector, you can stick a screwdriver up in the signal housing to push the release tab on the connector.  The Custom Dynamics lights come with a 3 inches of extra wire, so install is easy once you get the factory led out. 

To answer your second question, you do have to remove the (2) screws on each side attaching the Fang to the Fairing, (1) screw each side under the Front Speaker covers, (1) Cap bolt in Signal Housing on each side, and (2) screws on each side of Windshield,(12) total to remove the Front Fairing.

Title: Re: What did you do to or on your CVO today?
Post by: fred786 on January 23, 2019, 05:21:02 AM
Thanks guys very much appreciated!  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Blue666s on January 23, 2019, 04:31:19 PM
Added Custom Dynamics front signals to 2019 Red Pepper. :pepper:

Which ones are those?  I went to their website but wasn't sure which ones you got.  They look nice.  Did you also get clear lenses?
Title: Re: What did you do to or on your CVO today?
Post by: Critical on January 23, 2019, 11:12:16 PM
Completed the break in period - finally get to see what this baby will do!
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on January 24, 2019, 12:47:09 PM
Which ones are those?  I went to their website but wasn't sure which ones you got.  They look nice.  Did you also get clear lenses?

These are the ones that most of us have installed.

https://www.customdynamics.com/front-bullet-style-harley-davidson-led-inserts-jae?cat=2


 I highly recommend getting a pair of their smoked lenses as well.


https://www.customdynamics.com/new-bullet-style-turn-signal-lenses?cat=
Title: Re: What did you do to or on your CVO today?
Post by: Critical on January 24, 2019, 01:30:30 PM
I highly recommend getting a pair of their smoked lenses as well.
https://www.customdynamics.com/new-bullet-style-turn-signal-lenses?cat=

Will the stock smoke lenses still work on the newer bikes?
Title: Re: What did you do to or on your CVO today?
Post by: michaelokielee@yahoo.com on January 24, 2019, 02:25:34 PM
Which ones are those?  I went to their website but wasn't sure which ones you got.  They look nice.  Did you also get clear lenses?

Custom Dynamics Front Dynamic Ringz LED Turn Signal Inserts #GEN-200-AW-JAE, got them on Ebay $89.95
Title: Re: What did you do to or on your CVO today?
Post by: noharley on January 24, 2019, 04:25:40 PM
Stuck on a Marvin the Martian Mean Mug bezel applique....
(https://farm5.staticflickr.com/4891/39898926293_d86af7f1ef_z.jpg) (https://flic.kr/p/23MJqJi) (https://flic.kr/p/23MJqJi)   (https://www.flickr.com/photos/152360342@N02/)
(https://farm5.staticflickr.com/4824/31922233737_3c0c17249c_z.jpg) (https://flic.kr/p/QCRMWi) (https://flic.kr/p/QCRMWi)   (https://www.flickr.com/photos/152360342@N02/)
Title: Re: What did you do to or on your CVO today?
Post by: Critical on January 24, 2019, 04:44:38 PM
Stuck on a Marvin the Martian Mean Mug bezel applique....

That is cool!
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on January 24, 2019, 04:56:34 PM
Will the stock smoke lenses still work on the newer bikes?

Yes, they will fit but they will distort the LEDs some.
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on January 24, 2019, 05:00:38 PM
Stuck on a Marvin the Martian Mean Mug bezel applique....


Been looking at those too. Adds just a little more sinister to what is already a bad azz looking front end, especially with the Dynamic Ringz.
Title: Re: What did you do to or on your CVO today?
Post by: bigcraig on January 27, 2019, 10:29:15 AM
Added a oil pressure and oil temp gauge.

Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on January 28, 2019, 06:58:35 AM
Was going to install the paint matched head light bezel until I read the instruction, do not install under 50 degrees.  Recommend 70 degrees.  It was 30 degrees.

So I went and did a nice job 160 mile ride.  Will take her out again today and ride.
Title: Re: What did you do to or on your CVO today?
Post by: Phreakyz on January 28, 2019, 07:49:07 AM
Was going to install the paint matched head light bezel until I read the instruction, do not install under 50 degrees.  Recommend 70 degrees.  It was 30 degrees.

So I went and did a nice job 160 mile ride.  Will take her out again today and ride.
Please post a pic when you do,  I was wondering that those would look like.   Thank!
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on January 29, 2019, 08:55:34 AM
Did a nice 282 mile ride around the back roads of east TN yesterday.  Snow today, so I will not be getting out.  Will most likely install custom dynamics front halo turn signals, and screens for the vents.
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on January 29, 2019, 07:24:46 PM
New king tour pack on the mako shark.     Came out great.  And it is removable!  :huepfenjump3:
Title: Re: What did you do to or on your CVO today?
Post by: Robmay on January 29, 2019, 08:34:25 PM
More pics Stu?


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: OBB on January 29, 2019, 08:45:54 PM
New king tour pack on the mako shark.     Came out great.  And it is removable!  :huepfenjump3:

I missed something somewhere. When did you get a Mako? Please fill those gaps with speaker pods, even if you use them as cupholders.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on January 30, 2019, 08:33:25 AM
Busy yesterday, cut out 4 pair of vent screens.  Removed the front of the fairing as you can not remove turn signal bulbs with out doing so, wires are to short to get in and unplug.    So I then installed custom dynamic Dynamic Ringz which are white LED that turn yellow when you use turn signals.  Then I installed the vent screen.  I also installed the mount for my GoPro on the front of the fairing.  I also put plugs in all the holes from the passenger pegs when they were removed.

(http://www.cvoharley.com/smf/gallery/6353_30_01_19_7_52_23.jpeg)

(http://www.cvoharley.com/smf/gallery/6353_30_01_19_7_49_48.jpeg)

(http://www.cvoharley.com/smf/gallery/6353_30_01_19_7_53_06.jpeg)

(http://www.cvoharley.com/smf/gallery/6353_30_01_19_7_50_44.jpeg)

(http://www.cvoharley.com/smf/gallery/6353_30_01_19_7_51_32.jpeg)
Title: Re: What did you do to or on your CVO today?
Post by: OBB on January 30, 2019, 10:19:29 AM
Busy yesterday, cut out 4 pair of vent screens.  Removed the front of the fairing as you can not remove turn signal bulbs with out doing so, wires are to short to get in and unplug.    So I then installed custom dynamic Dynamic Ringz which are white LED that turn yellow when you use turn signals.  Then I installed the vent screen.  I also installed the mount for my GoPro on the front of the fairing.  I also put plugs in all the holes from the passenger pegs when they were removed.


How many miles does your little handlebar buddy have on his butt now? ;D
Title: Re: What did you do to or on your CVO today?
Post by: CJ CYCLE on January 30, 2019, 12:41:07 PM
I pulled all the chrome off my 2018 CVO RG, the Lava Orange model and sent in for powder coating, gloss black.  I have the front end complete blacked out, with Legend suspension.  Have to have my son bring his Mac computer home from college so I can upload my video to my youtube channel.  Will post pics of my bike when I get the parts back and installed.  Really looking forward to the look I wanted!  Can't wait!

 :worthless:
Title: Re: What did you do to or on your CVO today?
Post by: OBB on January 30, 2019, 03:56:32 PM
Curious as to why you have to wait for his Mac. If you have your own channel, can't you upload it via phone or another laptop?

Sent from my boring Droid phone.

Title: Re: What did you do to or on your CVO today?
Post by: noharley on January 30, 2019, 05:21:30 PM
Stuck on a Marvin the Martian Mean Mug bezel applique....


Been looking at those too. Adds just a little more sinister to what is already a bad azz looking front end, especially with the Dynamic Ringz.

...added the Rngz today...you were right.

(https://farm5.staticflickr.com/4832/33056730858_4d4661c8b1_z.jpg) (https://flic.kr/p/Sn7opu) (https://flic.kr/p/Sn7opu)   (https://www.flickr.com/photos/152360342@N02/)
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on January 30, 2019, 06:36:21 PM
Nice...looks killer Ken!
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on January 30, 2019, 06:40:14 PM
Nothing as exciting as you guys but I went in to the dealer and had the clutch actuator recall handled and they did my Boom update for me as well.

Party on Garth!  ;)
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on January 31, 2019, 07:34:21 AM
How many miles does your little handlebar buddy have on his butt now? ;D

47,875 miles on the Handle bars, The 17 SESG, then the 18 SERG and now the 19 SERG.

Took the hand guards off yesterday and the cup holder has they both had paint chips.  Took them, the back rest base bracket and two pair of vent screens to the powder coater yesterday.  Also put new tags on the CVO King and the SERG.  Good for another year. 
Title: Re: What did you do to or on your CVO today?
Post by: fred786 on February 02, 2019, 06:52:56 AM
Spent the day at Doc"s Performance Tuning in Minneola Florida for Fullsac conversion, TTS, and Dyno Tune.  Doc is the best IMO.  Can't believe the improvement in pull and sound (2" power cores).  4th new bike Doc has tuned for me and likely not the last.
 :orange:
Title: Re: What did you do to or on your CVO today?
Post by: sabraitis on February 05, 2019, 08:08:17 AM
Added a QuadLock phone holder with RAM brake ball mount.  Going to use iPhone as input source for all music.  Going to use Waze for GPS.   Boom Box will be interface. 
Next stop.... Biketronics pro speaker system upgrade.  Feb 16th... wish me luck.
 :drummer:
Title: Re: What did you do to or on your CVO today?
Post by: rheiner on February 05, 2019, 09:19:25 PM
Installed a new Barnett clutch basket today. 2024-T3 anodized billet aluminum. This will give me a lot of peace of mind with my SESG that was dyno tuned at 125/125.
Title: Re: What did you do to or on your CVO today?
Post by: rheiner on February 05, 2019, 09:20:16 PM
pic 2
Title: Re: What did you do to or on your CVO today?
Post by: rheiner on February 05, 2019, 09:20:46 PM
pic 3
Title: Re: What did you do to or on your CVO today?
Post by: rheiner on February 05, 2019, 09:21:23 PM
pic 4
Title: Re: What did you do to or on your CVO today?
Post by: rheiner on February 05, 2019, 09:22:40 PM
pic 5
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on February 12, 2019, 10:23:17 AM
Installed the HD solo rack I had modified to haul my T-Bag Route 66.  When using rear seat for the bag, you have to polish fender each time you remove the seat.  I only have a seat on when hauling a bag.  Now no need to put rear seat on.  Rack will only be on with a bag on it.

(http://www.cvoharley.com/smf/gallery/6353_12_02_19_6_42_22.jpeg)

(http://www.cvoharley.com/smf/gallery/6353_12_02_19_10_14_55.jpeg)

(http://www.cvoharley.com/smf/gallery/6353_12_02_19_10_16_33.jpeg)
Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on February 12, 2019, 12:53:32 PM
Installed the HD solo rack I had modified to haul my T-Bag Route 66.  When using rear seat for the bag, you have to polish fender each time you remove the seat.  I only have a seat on when hauling a bag.  Now no need to put rear seat on.  Rack will only be on with a bag on it.

(http://www.cvoharley.com/smf/gallery/6353_12_02_19_6_42_22.jpeg)

(http://www.cvoharley.com/smf/gallery/6353_12_02_19_10_14_55.jpeg)

(http://www.cvoharley.com/smf/gallery/6353_12_02_19_10_16_33.jpeg)
Nicely done! Looks great!
Title: Re: What did you do to or on your CVO today?
Post by: Eben on February 12, 2019, 03:48:06 PM
So my Gunship grey FLHXSE was de-cat and baffles redone today. What do you guys think of the dyno graf?  :coolblue:
Title: Re: What did you do to or on your CVO today?
Post by: imoo6170 on February 12, 2019, 04:57:27 PM
Great idea "FLSTFI Dave" looks fantastic
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on February 13, 2019, 08:18:44 AM
I added the paint matched Headlight bezel trim piece to the front of the bike.

(http://www.cvoharley.com/smf/gallery/6353_13_02_19_8_14_40.jpeg)
Title: Re: What did you do to or on your CVO today?
Post by: acevtwin on February 13, 2019, 09:30:32 AM
Looks Great!
Title: Re: What did you do to or on your CVO today?
Post by: CVOdave on February 17, 2019, 05:42:50 PM
Installed aux. road lights. The kit is not designed to work with the CVO LED turn signals! But with a bit of cutting, splicing, and destroying the kits turn signal internals ……. she's ALIVE!
Title: Re: What did you do to or on your CVO today?
Post by: CVOdave on February 17, 2019, 06:08:58 PM
road light install pic2
Title: Re: What did you do to or on your CVO today?
Post by: Phreakyz on February 20, 2019, 07:38:49 AM
The view outside my Garage this morning....   O-H...I-O!
Title: Re: What did you do to or on your CVO today?
Post by: OBB on February 22, 2019, 06:47:03 AM
The view outside my Garage this morning....   O-H...I-O!
My view the same day you took that pix. Heading home today. Hope it's all gone.

 (https://uploads.tapatalk-cdn.com/20190222/3deb28de633f0f627f1677c8bf024e74.jpg)

Sent from my boring Droid phone.

Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on February 22, 2019, 08:36:36 PM
Mike,  That is my view about half the year.  Of course for me it for work, not pleasure.  I do it to be able to buy and ride CVO Bikes
Title: Re: What did you do to or on your CVO today?
Post by: Phreakyz on February 23, 2019, 07:26:19 AM
My view the same day you took that pix. Heading home today. Hope it's all gone.


OK - I'm  jealous!
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on February 23, 2019, 08:05:43 AM
King tour pak.  Gotta have one.
Title: Re: What did you do to or on your CVO today?
Post by: X-Man on February 24, 2019, 12:04:14 AM
Just picked up a 2019 FLHXSE.  Added a color-matched, quick-detach King Tour Pak with lighting, luggage rack, speakers and a remote lock; CVO heated tour seat; Freedom Shield; highway pegs; garage door opener (not the $140 MoCo one); V&H headers, Neighbor Hater mufflers and tuned it; setup the headset; and connected the wireless remote module for my Gerbing clothing.  Oh - and the kids named her Harley-quinn (after the super hero).

If anyone is interested in how I setup the garage door opener to operate by flashing the lights for $34 in parts, hit me up and I'll be happy to share the details.  It's really easy.
I am interested in how you installed the electronic lock on the tour pack.
Title: Re: What did you do to or on your CVO today?
Post by: bigchuck on February 24, 2019, 08:29:47 AM
I am interested in how you installed the electronic lock on the tour pack.


X2. I would like to put power locks on my dads 2019 triglide for him.
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on February 24, 2019, 10:55:00 AM
King tour pak.  Gotta have one.
stu did you trade up or add the mako
Title: Re: What did you do to or on your CVO today?
Post by: kojak on February 24, 2019, 04:16:10 PM
Been riding all winter, got a 60 degree day today and got it washed, got all the nasty weather stuff off it.
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on February 24, 2019, 05:29:21 PM
I added.   Had nothing else to do with 42k :-\
Title: Re: What did you do to or on your CVO today?
Post by: longlast on February 24, 2019, 08:02:16 PM

 Great sunny day today went for a back road country ride

Title: Re: What did you do to or on your CVO today?
Post by: Para Bellum on February 25, 2019, 12:35:49 AM
Great sunny day today went for a back road country ride
Spent two years in England and never saw a sunny day in winter.  Must be global cooling  global warming  luck of the non-irish.   ;D
Title: Re: What did you do to or on your CVO today?
Post by: longlast on February 25, 2019, 01:33:40 PM
Spent two years in England and never saw a sunny day in winter.  Must be global cooling  global warming  luck of the non-irish.   ;D

Must be something going on,......reports today say it was the hottest February day on record ever  :divers009:
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on February 25, 2019, 09:12:44 PM
New battery in the 16rg.    3 years on the stock battery.  That's amazing to me 😁. Stuart.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on February 25, 2019, 09:22:13 PM
Put the Ohlins back on it after spending a small fortune to have them serviced. Well, not a small fortune but about 35% of what new ones would cost me. :o Didn't realize when I bought them that they require service every 20-25k miles. With some help from Carol Burks, aka Smarty here on the forum, I did some checking when putting them back on. Shock mounting holes are different lengths  on these bikes. Right side holes are 1/8" of an inch closer together than the left side. Glad the shocks I have ( HD 159) have adjustable length on them. Makes putting them back on easier.  Will readjust the sag/preload on them once the weather breaks. Bike is still on the jack for at least another month.
Title: Re: What did you do to or on your CVO today?
Post by: smkymtnboy on February 26, 2019, 08:42:00 AM
surprise surprise! i installed a compensator on my 08 cuse3. new compensator is smooth. hopefully the upgraded compensator from harley has some longevity built in this one. :huepfenlol2: :huepfenlol2: :huepfenlol2:
Title: Re: What did you do to or on your CVO today?
Post by: Para Bellum on February 26, 2019, 06:33:41 PM
Must be something going on,......reports today say it was the hottest February day on record ever  :divers009:
Strange, b/c the U.S. is having a very cold and snowy winter.
Title: Re: What did you do to or on your CVO today?
Post by: JCZ on February 26, 2019, 09:58:05 PM
Babe and I rode from Tucson down to Benson, Huachuca City and Tombstone and back.

I'll be your huckleberry!

It got pretty warm today, considering it snowed 4" just a couple of days ago.  I rode down in my t-shirt.
Title: Re: What did you do to or on your CVO today?
Post by: McLarenCVO04 on February 28, 2019, 09:38:07 PM
Well I just got mine yesterday. So after work today started cleaning it up and got it on a battery tender.
Title: Re: What did you do to or on your CVO today?
Post by: lyn.husen on February 28, 2019, 10:18:48 PM
Went out to check tire pressures this morning and ended up detailing it too.


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: SIKBIRD on March 02, 2019, 02:19:26 PM
Finally swapped out my old warped rotors...old:
Title: Re: What did you do to or on your CVO today?
Post by: SIKBIRD on March 02, 2019, 02:21:38 PM
Finally swapped out my old warped rotors...old:

New...

Also installed new lyndall z pads to go with my fresh rotors
Title: Re: What did you do to or on your CVO today?
Post by: McLarenCVO04 on March 05, 2019, 06:22:29 PM
Friend of mine got me a ride bell today. So I put thag on! Sunday we may see 50’s hopefully I can go for a quick ride atleast.
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on March 05, 2019, 11:51:22 PM
Ordered TAB slip ons with the Zombie baffles. Spoke to one of the owners of the company today and he swears the stock heat shields and end caps will work with them. Was a really nice guy, will find out if he was a honest guy next week..
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on March 06, 2019, 08:31:26 PM
I'll be interested to see what you think after you have run them.
Title: What did you do to or on your CVO today?
Post by: Bav on March 07, 2019, 02:04:13 AM
Ordered TAB slip ons with the Zombie baffles. Spoke to one of the owners of the company today and he swears the stock heat shields and end caps will work with them. Was a really nice guy, will find out if he was a honest guy next week..

I’ve acquired some TAB mufflers with no baffles in. Can’t decide whether to go with the Zombie or standard baffles. Spoke to TAB who were very helpful. He said imagine it on a scale of 1 to 10 with 1 being stock and 10 being no baffles. He put Zombies around an 8. I’m going to fit them to see what I think before deciding. I’m keeping the stock headers for now.

Might just wait for your feedback.


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: McLarenCVO04 on March 09, 2019, 02:37:53 PM
Got her all cleaned up! Warmer weather is coming thank god!
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on March 09, 2019, 08:23:47 PM
I’ve acquired some TAB mufflers with no baffles in. Can’t decide whether to go with the Zombie or standard baffles. Spoke to TAB who were very helpful. He said imagine it on a scale of 1 to 10 with 1 being stock and 10 being no baffles. He put Zombies around an 8. I’m going to fit them to see what I think before deciding. I’m keeping the stock headers for now.

Might just wait for your feedback.


Sent from my iPhone using Tapatalk
When I bought mine I was between Zombie's and none at all as I am trying to improve sound. I spoke to Cassie who is one of the co owners and he told me the sound is much deeper with the Zombie's and of course no baffles hurts low end considerably (his words). He did say it was possible to get some of that performance back with tuning but since I am running the Harley tuner for warranty reasons not sure that is possible.
I am having them installed next week and looking forward to hearing them in person. After running them for a while I may try and remove the baffles and see how they sound and perform for my self, will see.
As a FYI, Cassie told me that 9 out of 10 pipes he sells are with the zombie baffles.
Title: Re: What did you do to or on your CVO today?
Post by: JCZ on March 09, 2019, 09:48:53 PM
When I bought mine I was between Zombie's and none at all as I am trying to improve sound. I spoke to Cassie who is one of the co owners and he told me the sound is much deeper with the Zombie's and of course no baffles hurts low end considerably (his words). He did say it was possible to get some of that performance back with tuning but since I am running the Harley tuner for warranty reasons not sure that is possible.
I am having them installed next week and looking forward to hearing them in person. After running them for a while I may try and remove the baffles and see how they sound and perform for my self, will see.
As a FYI, Cassie told me that 9 out of 10 pipes he sells are with the zombie baffles.

Put the stock mufflers back on! 
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on March 09, 2019, 11:31:10 PM
Put the stock mufflers back on!
You know I love "sound"..
Title: Re: What did you do to or on your CVO today?
Post by: JCZ on March 10, 2019, 02:27:16 PM
You know I love "sound"..

At least you're not one of those guys that goes after "sound" before performance!  :2vrolijk_21:

I'm in Vegas for a few weeks, come on over....let's ride!
Title: Re: What did you do to or on your CVO today?
Post by: Unbalanced on March 10, 2019, 06:20:29 PM
(https://uploads.tapatalk-cdn.com/20190310/d5b498b613d7ac4cb58f9936852a7374.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: CVO 2015 on March 10, 2019, 08:04:15 PM
Unbalanced that looks real good on your saddlebag..Where did you get it?

Sent from my SM-N960U using Tapatalk

Title: What did you do to or on your CVO today?
Post by: Unbalanced on March 10, 2019, 08:08:08 PM
From Puzzled (Mike) - saddle bag insert thread on this site

https://www.cvoharley.com/smf/index.php?topic=115489.msg1480913#msg1480913
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on March 10, 2019, 09:56:33 PM
At least you're not one of those guys that goes after "sound" before performance!  :2vrolijk_21:

I'm in Vegas for a few weeks, come on over....let's ride!
what are the dates you are there?
Title: Re: What did you do to or on your CVO today?
Post by: JCZ on March 10, 2019, 10:30:42 PM
what are the dates you are there?

I should be here for about a month.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on March 16, 2019, 08:44:35 AM
Washed the 19 CVO Road glide real good after riding it down to FL on Friday and home Wednesday.  Got to big stone chips this trip, on on the front of the fairing and one on the left saddle bag lid.  Not happy about that.
Title: Re: What did you do to or on your CVO today?
Post by: kojak on March 16, 2019, 04:50:42 PM
Washed the 19 CVO Road glide real good after riding it down to FL on Friday and home Wednesday.  Got to big stone chips this trip, on on the front of the fairing and one on the left saddle bag lid.  Not happy about that.
Just part of riding, treat it as a badge of honor! Gotten road chips on just about every bike I've owned on long trips.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on March 17, 2019, 05:22:32 AM
Just part of riding, treat it as a badge of honor! Gotten road chips on just about every bike I've owned on long trips.

Just seems to have chipped up a lot earlier in its life, an easier than the other.  I average 24K a year on my bikes.  This one has more at 3800 miles than the last two did together at over 20K each.

Rode her again yesterday after all cleaned up.  Ordered the touch up paint.
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on March 17, 2019, 08:34:47 AM
replaced the battery in Beauregard yesterday.  Hoping to be back on two wheels in a month or so.  Sure did feel good working on it yesterday, smelling that exhaust and straddling it in the driveway.  Dang it folks, I sure do miss and love riding... ;D
Title: Re: What did you do to or on your CVO today?
Post by: michaelokielee@yahoo.com on March 22, 2019, 03:38:01 PM
Rode her into work today!! I just got her all cleaned up after the wet ride back from Daytona.  I used a F11 knock off called " The Last Coat", we'll see how long she stays clean.  :pepper:
Title: Re: What did you do to or on your CVO today?
Post by: CHH_Badkarma on March 22, 2019, 05:51:25 PM
Went down to Danny Gray and ordered a buttcrack seat with airhawk.
The nice lady there said it will take longer than normal since they are getting ready to move the shop.
On the upside I get to save on shipping since I can just go pick it up 👍
Title: Re: What did you do to or on your CVO today?
Post by: noharley on March 22, 2019, 07:19:34 PM
Quality part Puzzled, thanks....

(https://farm8.staticflickr.com/7921/46721672884_71171b19ea.jpg) (https://flic.kr/p/2ebCMAd) (https://flic.kr/p/2ebCMAd)   (https://www.flickr.com/photos/152360342@N02/)
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on March 22, 2019, 07:21:14 PM
When I bought mine I was between Zombie's and none at all as I am trying to improve sound. I spoke to Cassie who is one of the co owners and he told me the sound is much deeper with the Zombie's and of course no baffles hurts low end considerably (his words). He did say it was possible to get some of that performance back with tuning but since I am running the Harley tuner for warranty reasons not sure that is possible.
I am having them installed next week and looking forward to hearing them in person. After running them for a while I may try and remove the baffles and see how they sound and perform for my self, will see.
As a FYI, Cassie told me that 9 out of 10 pipes he sells are with the zombie baffles.
Got bike back yesterday and the mufflers sound incredible. Never would have thought bike could sound that good with the cats still in. Very deep note and great volume for morons like me that like loud pipes. Looking forward to a nice long ride checking out the "super bloom" out here with the new set up.
Title: Re: What did you do to or on your CVO today?
Post by: Plzdvm on March 22, 2019, 08:30:43 PM
V & H High output 2 to 1 black w Q baffle and FP3 fuelpak.....
Title: Re: What did you do to or on your CVO today?
Post by: CHH_Badkarma on March 22, 2019, 08:47:52 PM
Nice lookin grapefruit shooter ya got there 👍
Title: Re: What did you do to or on your CVO today?
Post by: CVODON on March 22, 2019, 08:53:39 PM
Cleaned bike including greasy finger prints off of new Galfer Wave Rotors, Put on a few miles to bed in the new brake pads.
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on March 22, 2019, 10:26:52 PM
Tore up the wheel on the rear of the FXR.  Doing some spring maintenance and the rear rotor bolts were seized.  Probably never removed once in their 30 years in place.  Four of the five holes lost threads with the bolts coming out.  The fifth looked and felt qustionable.  Pulley side good though.  Rotor side FUBAR.  Thank goodness for a flat table to work on and a set of Time-serts already in the tool box.  Had exactly five sleeves left and used them all.
Title: Re: What did you do to or on your CVO today?
Post by: PBSTN on March 22, 2019, 10:29:46 PM
New tires. :)
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on March 22, 2019, 10:31:11 PM
New tires. :)


Oh yeah, me too, biggest reason the wheel was off.  Then I got sidetracked by "other problems."
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on March 22, 2019, 11:46:34 PM
New tires. :)
Yea, did that also. Went with American Elites as the C2's not available for the front tire on the Roadglide. Dealer thinks I will like them same as the C2's I run on my 12 Roadglide. Any opinions?
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on March 23, 2019, 12:00:19 AM
rode that SOB  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on March 23, 2019, 08:30:55 AM
Updated the GTS software, then rode her.  Plan on riding again today
Title: Re: What did you do to or on your CVO today?
Post by: kevin_n on March 23, 2019, 08:16:14 PM
Uncovered it and changed the fluids today. Hoping the weather continues to warm and there is no surprise snow storm. Come on spring  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: PBSTN on March 23, 2019, 10:00:30 PM
Yea, did that also. Went with American Elites as the C2's not available for the front tire on the Roadglide. Dealer thinks I will like them same as the C2's I run on my 12 Roadglide. Any opinions?
I have never ran the c2's or the elites. I have only ran oem Dunlop on the new frame bikes. On the 03 serk I went with the kenda cataclysm's. They are load rated and are a dual compound tire. Thought I'd try them out. If they work out good. I might put them on the 10 when it needs tires.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on March 24, 2019, 07:46:15 AM
I have never ran the c2's or the elites. I have only ran oem Dunlop on the new frame bikes. On the 03 serk I went with the kenda cataclysm's. They are load rated and are a dual compound tire. Thought I'd try them out. If they work out good. I might put them on the 10 when it needs tires.

Make sure you post up some info about them and a review if you would. I drive past their Tech Center in N.Canton several times a day going to and from work. I've always thought about stopping in and checking on bike tires but never get off work in time.
Title: Re: What did you do to or on your CVO today?
Post by: King Glide on March 24, 2019, 12:05:32 PM
I’m running the elites and I think they are terrific. Very rough road forgiving for a smoother ride and rock solid on the turns.
Title: Re: What did you do to or on your CVO today?
Post by: groupw on March 25, 2019, 12:34:11 AM
....... i rode it
....... till it started to snow in Cascade & I came back down
Title: Re: What did you do to or on your CVO today?
Post by: Powermaker on March 25, 2019, 08:27:42 PM
Put the new tourpak on my Mako.

Title: Re: What did you do to or on your CVO today?
Post by: PBSTN on March 25, 2019, 10:14:42 PM
Make sure you post up some info about them and a review if you would. I drive past their Tech Center in N.Canton several times a day going to and from work. I've always thought about stopping in and checking on bike tires but never get off work in time.
Will do.
Title: Re: What did you do to or on your CVO today?
Post by: McLarenCVO04 on March 25, 2019, 11:26:54 PM
Replacing my chipping inner fairing. Upgrading my radio and speakers while I'm in there.
Title: Re: What did you do to or on your CVO today?
Post by: Powermaker on March 27, 2019, 07:15:55 PM
Got a ride in today.
Title: Re: What did you do to or on your CVO today?
Post by: Powermaker on March 27, 2019, 07:16:56 PM
another...
Title: Re: What did you do to or on your CVO today?
Post by: OBB on March 27, 2019, 08:03:15 PM
another...
You have the only house in your subdivision? Lol

Sent from my boring Droid phone.

Title: Re: What did you do to or on your CVO today?
Post by: Powermaker on March 27, 2019, 09:29:20 PM
You have the only house in your subdivision? Lol

Sent from my boring Droid phone.

My side of the street is full,the lots across the street haven’t sold (thankfully)lol.
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on March 28, 2019, 12:43:01 PM
Looks great man!! I guess I should get around to posting a pic with my TP on. I've had the King w/matching backrest for over a year now and the few times that I've had it on I forget to take a pic.  :nixweiss: lol
Title: Re: What did you do to or on your CVO today?
Post by: Powermaker on March 28, 2019, 01:19:16 PM
Looks great man!! I guess I should get around to posting a pic with my TP on. I've had the King w/matching backrest for over a year now and the few times that I've had it on I forget to take a pic.  :nixweiss: lol

Thanks, 70 degrees here today, 38 tomorrow. I think it’s the first time the sun was out since I bought the bike. lol
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on March 28, 2019, 01:26:07 PM
Sounds like a great day for miles and miles of smiles.  :bananarock:
Title: Re: What did you do to or on your CVO today?
Post by: CHH_Badkarma on March 28, 2019, 07:38:25 PM
Took advantage of the warm sun and clear skies to take in some nice views

(https://farm8.staticflickr.com/7908/47436196192_54c3f55bdd_o.jpg) (https://flic.kr/p/2fgLUtA)
Title: Re: What did you do to or on your CVO today?
Post by: dayne66 on March 28, 2019, 07:52:56 PM
The dealer....ya.... I know, but, still have ESP they had a look inside my bike,,,,,,,getting new cams, rebuilding the heads, lifters ,oil pump, cam plate, flywheel...a trans bearing or two...shifter parts....and a bunch of other stuff...all for the $50 deductible.  $7400 cdn in parts.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on March 29, 2019, 06:03:45 AM
The dealer....ya.... I know, but, still have ESP they had a look inside my bike,,,,,,,getting new cams, rebuilding the heads, lifters ,oil pump, cam plate, flywheel...a trans bearing or two...shifter parts....and a bunch of other stuff...all for the $50 deductible.  $7400 cdn in parts.
Damn, Hopefully it's fixed quick enough before riding season up there gets into full swing.
Title: Re: What did you do to or on your CVO today?
Post by: TN on March 29, 2019, 08:29:53 AM
Got first step completed on assembly.  :orange:


Title: Re: What did you do to or on your CVO today?
Post by: dayne66 on March 29, 2019, 10:15:44 AM
Damn, Hopefully it's fixed quick enough before riding season up there gets into full swing.
Gonna be 2 weeks......but.......I have got a bunch of house projects to get done  and i'll go hard on them while I have some decent weather and BEFORE the bike get back to me......so I can ride without guilt.......hahaha!
Title: Re: What did you do to or on your CVO today?
Post by: k9f on March 30, 2019, 01:42:50 PM
Dug mine out from the back of the garage, gave her the once over and fired up on the button first time since October. Roll on no salt and nicer weather.

Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on March 30, 2019, 02:26:48 PM
Great lookin bike!
Title: Re: What did you do to or on your CVO today?
Post by: Spiked Olive on March 30, 2019, 07:01:37 PM
I installed new 12 inch Yaffe Monkey Bars last weekend along with chrome Kahuna heated grips. This is on a 2017 CVO Limited.

Got to take the wife for a 170 miles ride today up some nice NC two lane roads and along the Blue Ridge Parkway. I love the bars and grips. These grips with metal on them do not seem to get as warm as the basic stock heated grips.
Title: Re: What did you do to or on your CVO today?
Post by: McLarenCVO04 on March 31, 2019, 06:20:46 PM
Finished up my new radio install. Sounds pretty good with the boom speakers! Now I need to get the adapter rings and 6.5 mounted!
Title: Re: What did you do to or on your CVO today?
Post by: McLarenCVO04 on April 04, 2019, 04:34:02 PM
Changed the oil and got it ready for riding weather! Also discovered I need more power in my stereo. Pioneer deck with the boom speakers just isn't loud going down the road. But I have to give a shout out to SIKBIRD. I am a newbie and he has helped me out so much the passed few days!
Title: Re: What did you do to or on your CVO today?
Post by: noharley on April 12, 2019, 05:14:01 PM
Ordered Galfer Wave rotors.


Title: Re: What did you do to or on your CVO today?
Post by: wiliturk on April 13, 2019, 04:07:53 PM
Took advantage of the warm sun and clear skies to take in some nice views

(https://farm8.staticflickr.com/7908/47436196192_54c3f55bdd_o.jpg) (https://flic.kr/p/2fgLUtA)

Is that a Simpson Ghost Bandit? How do you like it?
Title: Re: What did you do to or on your CVO today?
Post by: dayne66 on April 13, 2019, 04:38:37 PM
Called about the progress on the warranty work...trans is back together...start on the motor on Monday....'should' have late Wed or Thursday


glad the weather has not been real nice!

Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on April 15, 2019, 08:07:44 PM
Got 10,000 mile service done on my 2019 CVO Street Glide. Ready for my trip to Bangor, ME.
Title: Re: What did you do to or on your CVO today?
Post by: McLarenCVO04 on April 15, 2019, 09:25:52 PM
New plugs and ordered a passenger backrest.
Title: Re: What did you do to or on your CVO today?
Post by: X-Man on April 16, 2019, 12:29:03 AM
Well technically not today, but I recently installed a tourpak spoiler and power lock.
Title: Re: What did you do to or on your CVO today?
Post by: X-Man on April 16, 2019, 12:35:56 AM
Well technically not today, but I recently installed a tourpak spoiler and power lock.
Here's a picture of the lock actuator installed.
Title: Re: What did you do to or on your CVO today?
Post by: michaelokielee@yahoo.com on April 16, 2019, 01:35:34 PM
Here's a picture of the lock actuator installed.

I have mine wired, but waiting for the lock. I was wondering if on the Limited if the Actuator was hidden behind the TP Liner.  I also have the liner in my TP, looks like you just cut your liner around the actuator?
Title: Re: What did you do to or on your CVO today?
Post by: Farm boy on April 16, 2019, 11:04:02 PM
No pics, but installed cr575 cams, S&S geardrive, S&S oil pump :huepfenjump3:
Getting there  :huepfenlol2:
Title: Re: What did you do to or on your CVO today?
Post by: OBB on April 17, 2019, 09:03:08 PM
Finally got my 14" KST Spearhead bars finished up. A little tweak here and there and I'm all set.

Second pix shows the adjustment clamp when you can change your wrist angle some.

No extensions on the wires or stretching them at all. Stock hydro cables also.

For anyone wondering, the bars measure 15" from the top of the cross bar to the top of the peak.


 (https://uploads.tapatalk-cdn.com/20190418/5aca8f0b496def0968b96c65a8e83082.jpg)

(https://uploads.tapatalk-cdn.com/20190418/1aea6220d938a705596746ad6b20c577.jpg)

Sent from my boring Droid phone.

Title: Re: What did you do to or on your CVO today?
Post by: bigchuck on April 17, 2019, 09:08:27 PM
First I've seen of the Spearhead with adjustable wrist angle. Very nice. Great looking bike
Title: Re: What did you do to or on your CVO today?
Post by: X-Man on April 17, 2019, 09:10:05 PM
I have mine wired, but waiting for the lock. I was wondering if on the Limited if the Actuator was hidden behind the TP Liner.  I also have the liner in my TP, looks like you just cut your liner around the actuator?
Yes, the liner needs to be cut. Make the cutout in the liner about  1/4” smaller than the actuator housing all around. There is a recess in the back of the actuator for the liner to nest into. This is the same setup as the CVO Limited. 
Title: Re: What did you do to or on your CVO today?
Post by: SIKBIRD on April 19, 2019, 09:57:02 AM
Finally got my 14" KST Spearhead bars finished up. A little tweak here and there and I'm all set.

Second pix shows the adjustment clamp when you can change your wrist angle some.

No extensions on the wires or stretching them at all. Stock hydro cables also.

For anyone wondering, the bars measure 15" from the top of the cross bar to the top of the peak.


 (https://uploads.tapatalk-cdn.com/20190418/5aca8f0b496def0968b96c65a8e83082.jpg)

(https://uploads.tapatalk-cdn.com/20190418/1aea6220d938a705596746ad6b20c577.jpg)

Sent from my boring Droid phone.

Very interesting, so are the bars 3-piece, as in they come completely apart? if so, I would think that would make wiring them a little easier.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on April 19, 2019, 11:06:11 AM


Very interesting, so are the bars 3-piece, as in they come completely apart? if so, I would think that would make wiring them a little easier.
Correct. The wires exit from the bottom of the riser bars and just run along the bottom of the bars into the cluster on the Shark. Makes for pretty easy wiring although the extra wires from the heated grips can make things a little more interesting.

Here's a link to them.

https://www.youtube.com/watch?time_continue=20&v=1Qvy2OH4y5c

Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on April 19, 2019, 01:28:08 PM
Cool bars and the install video is really good as well, no matter who's bars your installing.

https://www.youtube.com/watch?v=JdpR4ylilKk
Title: Re: What did you do to or on your CVO today?
Post by: Phreakyz on April 19, 2019, 01:55:42 PM
Cool bars and the install video is really good as well, no matter who's bars your installing.


Wow that really is a great video.   Makes it look pretty easy.    Would even be helpful for installing heated grips!
Title: Re: What did you do to or on your CVO today?
Post by: Spiked Olive on April 19, 2019, 05:18:53 PM
You Road Glide guys really have it made on bars. Having done it three times now on the bat wing I don't fret it but it is a lot more difficult!

Installed 12 inch Yaffe's on mine over the winter.
Title: Re: What did you do to or on your CVO today?
Post by: Spiked Olive on April 19, 2019, 05:20:30 PM
Kahuna grips
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on April 19, 2019, 05:28:05 PM
Those are great bars! Had them on my 11 SESG and they were the perfect height for me but a bitch to install and of coarse pre canbus so had to lengthen EVERYTHING. With the SERG much easier transformation but to keep the cold wind off my hands I needed to go with the 10" Monkey Bars unfortunately, but waaay better than stock!!
A little give, a little take.
Title: Re: What did you do to or on your CVO today?
Post by: Spiked Olive on April 19, 2019, 06:04:41 PM
Those are great bars! Had them on my 11 SESG and they were the perfect height for me but a bitch to install and of coarse pre canbus so had to lengthen EVERYTHING. With the SERG much easier transformation but to keep the cold wind off my hands I needed to go with the 10" Monkey Bars unfortunately, but waaay better than stock!!
A little give, a little take.

Well I understand the give and take. I had 10 inch Yaffe's and they were very good, but wanted taller. I ride all year and the wind is not an issue as I have invested in excellent gear. What I have noticed with the 12 inch is all the bugs the controls catch! Wasn't expecting that and the extra cleaning.

Title: Re: What did you do to or on your CVO today?
Post by: GB506 on April 19, 2019, 08:00:25 PM
Kahuna grips

That Olive Gold is really cool.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on April 19, 2019, 10:03:12 PM
Wow that really is a great video.   Makes it look pretty easy.    Would even be helpful for installing heated grips!
I THINK, your TGS  is prewired for Heated Grips, You'd only have to fish the wires down the clutch side and buy the heated grips.
Title: Re: What did you do to or on your CVO today?
Post by: Phreakyz on April 20, 2019, 07:39:13 AM
I THINK, your TGS  is prewired for Heated Grips, You'd only have to fish the wires down the clutch side and buy the heated grips.
Thanks for the info!
Title: Re: What did you do to or on your CVO today?
Post by: Hondo2doc on April 22, 2019, 08:36:41 AM
Well yesterday I did a 325 mile through central Florida........and today is the cleanup. Welcome to luvebug hell(https://uploads.tapatalk-cdn.com/20190422/47e52dc52b2d60b8a440df836c11e4c8.jpg)

Sent from my SM-G950U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: Grizzly on April 22, 2019, 08:44:08 AM
Hope you kept that vent closed.  ;D
Title: Re: What did you do to or on your CVO today?
Post by: Robmay on April 22, 2019, 11:22:35 AM
Well yesterday I did a 325 mile through central Florida........and today is the cleanup. Welcome to luvebug hell(https://uploads.tapatalk-cdn.com/20190422/47e52dc52b2d60b8a440df836c11e4c8.jpg)

Sent from my SM-G950U using Tapatalk

Wow! They’re early this year.


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Hondo2doc on April 22, 2019, 11:35:27 AM
You should have seen my helmet and glasses.

Sent from my SM-G950U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: Phreakyz on April 22, 2019, 03:35:36 PM
Well yesterday I did a 325 mile through central Florida........and today is the cleanup. Welcome to luvebug hell

OMG!   That would make me crazy!
Title: Re: What did you do to or on your CVO today?
Post by: Robmay on April 22, 2019, 04:49:26 PM
Every May and September.


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Spiked Olive on April 22, 2019, 05:44:39 PM
WOW

I have heard about it, but happy to say I have not experienced it.

I ridden to Florida at least 8 times in the last 9 years, but always in March, October or December. Thanks for the reminder!
Title: Re: What did you do to or on your CVO today?
Post by: Robmay on April 22, 2019, 05:47:57 PM
Always befuddled me why the Thunder Beach Rally in the panhandle was twice a year....once in May and once in September. Maybe it’s different now. I haven’t kept up with it in years.


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: johnsachs on April 22, 2019, 06:15:48 PM
Need to stay close to the coast. A few of us rode from Deltona to St. Augustine for Easter dinner, etc. yesterday. Not a love bug in sight.  :nixweiss:
Leesburg Bike Fest this coming weekend. Could run into them inland.  >:(  We'll be doing "Jeep Beach" in Daytona instead.
John
Title: Re: What did you do to or on your CVO today?
Post by: King Glide on April 22, 2019, 11:21:44 PM
Just part of life in the deep south, that and everything non human wants to kill you.
Title: Re: What did you do to or on your CVO today?
Post by: Phreakyz on April 23, 2019, 06:35:38 AM
Well yesterday I did a 325 mile through central Florida........and today is the cleanup. Welcome to luvebug hell

Hey  -  I just noticed in the pics that your Twin Cool Radiators are not there??   What's up?
Title: Re: What did you do to or on your CVO today?
Post by: CVODON on April 23, 2019, 09:19:16 AM
Luckily they come off pretty easy. A water soaked towel laying over the area will soften them to the point they just wash right off. But you have to soak them first, otherwise it takes for ever to remove them. We live on the coast and so far have not seen them but Leesburg is always a BUGGY trip every year. I usually take A soaked towel in a large zip lok and try to get most of them off when we arrive downtown and then spend awhile after arriving back home that night. Wore a perforated leather jacket one year, it finally took a toothpick sticking it thru each perforation to remove them.
Title: Re: What did you do to or on your CVO today?
Post by: Hondo2doc on April 23, 2019, 09:31:22 AM
No more liquid cooled bike. John Sachs  (earlier post) put a S & S 124 in for me. Runs like a freaking beast now. All air cooled. I love it!!!!
Hey  -  I just noticed in the pics that your Twin Cool Radiators are not there??   What's up?

Sent from my SM-G950U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: Hondo2doc on April 23, 2019, 09:35:59 AM
They aren't that hard to remove. I just sprayed the bike down for about 15 minutes to get them soft. Then soap and water and gone. But yes you gotta get them good and wet.

John is 100% correct stay on the coast no issues. Go inland ( like Leesburg) get your ass covered with them.

Sent from my SM-G950U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on April 23, 2019, 09:37:52 AM
No more liquid cooled bike. John Sachs  (earlier post) put a S & S 124 in for me. Runs like a freaking beast now. All air cooled. I love it!!!!
Sent from my SM-G950U using Tapatalk

Obviously too fast...the vortex that is created with all that power caused the love bugs to be sucked right to ya... ;D :huepfenlol2:

Ran into the love bugs once on a Florida trip to the Keys back in the 90's....nasty little creatures. 

What's the last thing that goes through a love bugs mind when it hits your windshield/bike? 

Its butt hole... :zroflmao: :zroflmao:
Title: Re: What did you do to or on your CVO today?
Post by: johnsachs on April 23, 2019, 05:16:44 PM
Obviously too fast...the vortex that is created with all that power caused the love bugs to be sucked right to ya... ;D :huepfenlol2:

Ran into the love bugs once on a Florida trip to the Keys back in the 90's....nasty little creatures. 

What's the last thing that goes through a love bugs mind when it hits your windshield/bike? 

Its butt hole... :zroflmao: :zroflmao:
Prolly right, cause they stink worse than you can imagine.  :'(
John
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on April 25, 2019, 08:04:28 AM
Took a nice ride yesterday.  314 miles of the fun east TN hills.  A beautiful sunny day for it, had to cut it short so I could get home and cut the lawn.  Rain today.
Title: Re: What did you do to or on your CVO today?
Post by: JMatson on April 25, 2019, 10:59:00 PM
Installed Fullsac head pipe and 2.25 cores. Sounds and runs great.
Title: Re: What did you do to or on your CVO today?
Post by: 14 CVO King on April 26, 2019, 03:10:09 PM
Installed Fullsac head pipe and 2.25 cores. Sounds and runs great.

What tuner did you use?
Title: Re: What did you do to or on your CVO today?
Post by: JMatson on April 26, 2019, 03:21:02 PM
Used TTS and tune that Steve sent me.
Title: Re: What did you do to or on your CVO today?
Post by: Supershooter on April 29, 2019, 09:23:19 PM
I removed the baffles from my mufflers, so I can add some Fullsac parts.

Supershooter
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on April 30, 2019, 08:23:25 AM
I installed the Black Chrome heat shields and end caps on my Red Pepper CVO road glide.  Sure is a pain getting it all lined up correctly.  Looks good in my opinion, and how it should have come from the factory if you ask me.  Time to ride it today.

Title: Re: What did you do to or on your CVO today?
Post by: GB506 on May 01, 2019, 10:13:22 AM
Had 1k service done. No sumping. No transmission/primary transfer. Had the guys throw on some red plug wires and move the SiriusXM antenna out next to the vent.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on May 06, 2019, 07:08:17 AM
Will be dropping it off at SMHD in a little bit for the 5K service, with just over 5500 miles on it.

Leaving it with them as in addition to service, there are a couple of warranty items to look at.  Front rotor or rotors are warped.  Bad shake under moderate braking.

Also noticed that the lower fang on brake pedal side is rubbing on engine guard, paint missing from both.

Title: latch inserts.
Post by: Harleywild1hog on May 06, 2019, 01:26:42 PM
Hi HarleyWild1Hog
Your inserts looks great on your latch No Harley. :) :) I was very interested in where you ordered from.
If you could let me know.
Thanks HarleyWild1Hog.  :)
Title: Re: What did you do to or on your CVO today?
Post by: Harleywild1hog on May 06, 2019, 01:37:01 PM
Hi Unbalanced
I really interested in lathes inserts. Where can I order them. If you could replay with it.
New to site.
Thanks HarleyWild1Hog :) :orange:
Title: Re: What did you do to or on your CVO today?
Post by: Unbalanced on May 06, 2019, 04:14:27 PM
Welcome Harleywild1,

Please take a look at this thread on the site.

Puzzled “Mike” is your guy for the inserts, Shift Linkages, and screaming eagle Tourpak scripts.

Enjoy the site

Screamin' Eagle saddlebag latch inserts.
 https://r.tapatalk.com/shareLink?share_fid=5585&share_tid=115489&url=https%3A%2F%2Fwww%2Ecvoharley%2Ecom%2Fsmf%2Findex%2Ephp%3Ftopic%3D115489&share_type=t
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on May 07, 2019, 07:44:51 AM
Put a few miles on the CVO King yesterday doing errands after dropping off the CVO road glide for service and warranty work.
Title: Re: What did you do to or on your CVO today?
Post by: Spiked Olive on May 07, 2019, 02:55:43 PM
Well I can tell you what I did not do. I did not ride today and I still have not cleaned the bugs off from last week. ::)
Title: Re: What did you do to or on your CVO today?
Post by: JCZ on May 07, 2019, 02:57:30 PM
 :worthless: :worthless: :worthless: :worthless:
Title: Re: What did you do to or on your CVO today?
Post by: noharley on May 11, 2019, 08:20:38 PM
Calipers and red phats...

(https://live.staticflickr.com/65535/47776409272_1231efa900.jpg) (https://flic.kr/p/2fMQzYm) (https://flic.kr/p/2fMQzYm)   (https://www.flickr.com/photos/152360342@N02/)
Title: Re: What did you do to or on your CVO today?
Post by: noharley on May 11, 2019, 08:25:26 PM
(https://live.staticflickr.com/65535/33951377288_f189360913.jpg) (https://flic.kr/p/TJaFBW) (https://flic.kr/p/TJaFBW)   (https://www.flickr.com/photos/152360342@N02/)
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on May 12, 2019, 01:22:53 AM
Looks awesome!!
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on May 12, 2019, 08:27:22 PM
Red Calipers look really good on it.
Title: Re: What did you do to or on your CVO today?
Post by: Supershooter on May 13, 2019, 10:16:14 PM
 Got the Fullsac cores and tech mats in, replaced a battery in the fob, removed the Rush mufflers, and ran out of time before reassemblly could get done. Boy is it dirty back in there, I'll get it washed up and reassembled layer this week.
Supershooter
Title: Re: What did you do to or on your CVO today?
Post by: 09nessrg on May 14, 2019, 01:01:21 AM
Completed the Kyle Petty Charity Run from Seattle to Key Largo Fla - 3700 miles, 9 days with another 250 riders on Sunday. Dropped bike off Sunday at Peterson’s H-D south Miami for shipment to NJ for a ride with my old bros to get a main lobster roll!
Title: Re: What did you do to or on your CVO today?
Post by: noharley on May 14, 2019, 05:35:15 PM
Completed the Kyle Petty Charity Run from Seattle to Key Largo Fla - 3700 miles, 9 days with another 250 riders on Sunday. Dropped bike off Sunday at Peterson’s H-D south Miami for shipment to NJ for a ride with my old bros to get a main lobster roll!

...kudos on the ride man.
Title: Re: What did you do to or on your CVO today?
Post by: TN on May 19, 2019, 08:14:00 PM
Got to heat cycle my build today, had one small oil leak at the Jagg adapter where the oil lines hook up, problem solved. It seems like it’s gonna be a good ride. I’m just a parts changer, along with a few speciality tools I got the job done. All the work was done by me except I did send the heads off. I hope I get the reliability that I’m after. This is the most I’ve ever done to a bike at one time. Wish me luck, I need it, hasn’t been on the road yet.

My short list of the work:

S&S 4 3/8 crankshaft
SE lefty bearings both sides
S&S oil pump/plate
TTS 150 cams
SE tapered pushrods
S&S premium lifters
New jugs/pistons (Harley) 10.0 compression, stock, maybe
.030 head gaskets
SE rocker supports
S&S rockers
rocker lockers
Stock heads cleaned up/new components
SE 58mm throttle body, 5.3 injectors
Fullsac dx header pipe ceramic coated inside too, 2.25 muffler cores
Jagg fan assisted oil cooler
Replaced all sensors
Baker DD7
Baker +1.5 oil pan
Baker inner primary bearing
Baker shift arm
 clutch hub bearing
Throwout bearing
Primary chain
SE chain adjuster
Rebuilt starter
Alto carbonate clutch pak, Aim 95 lockup, 380# spring
Swing arm bearings
New pulley/belt/ sprocket
Ceramic hybrid wheel bearings
Handlebar bushings
Neck bearings
Motor mount
Tires, Avon cobra
Seals and gaskets

I hope to see ya on the road  :orange:
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on May 19, 2019, 09:14:30 PM
Got to heat cycle my build today, had one small oil leak at the Jagg adapter where the oil lines hook up, problem solved. It seems like it’s gonna be a good ride. I’m just a parts changer, along with a few speciality tools I got the job done. All the work was done by me except I did send the heads off. I hope I get the reliability that I’m after. This is the most I’ve ever done to a bike at one time. Wish me luck, I need it, hasn’t been on the road yet.

My short list of the work:

S&S 4 3/8 crankshaft
SE lefty bearings both sides
S&S oil pump/plate
TTS 150 cams
SE tapered pushrods
S&S premium lifters
New jugs/pistons (Harley) 10.0 compression, stock, maybe
.030 head gaskets
SE rocker supports
S&S rockers
rocker lockers
Stock heads cleaned up/new components
SE 58mm throttle body, 5.3 injectors
Fullsac dx header pipe ceramic coated inside too, 2.25 muffler cores
Jagg fan assisted oil cooler
Replaced all sensors
Baker DD7
Baker +1.5 oil pan
Baker inner primary bearing
Baker shift arm
 clutch hub bearing
Throwout bearing
Primary chain
SE chain adjuster
Rebuilt starter
Alto carbonate clutch pak, Aim 95 lockup, 380# spring
Swing arm bearings
New pulley/belt/ sprocket
Ceramic hybrid wheel bearings
Handlebar bushings
Neck bearings
Motor mount
Tires, Avon cobra
Seals and gaskets

I hope to see ya on the road  :orange:
Congrats Phil... that's one long @$$ laundry list... job well done. :2vrolijk_21:

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: michaelokielee@yahoo.com on May 20, 2019, 08:26:20 AM
Got to heat cycle my build today, had one small oil leak at the Jagg adapter where the oil lines hook up, problem solved. It seems like it’s gonna be a good ride. I’m just a parts changer, along with a few speciality tools I got the job done. All the work was done by me except I did send the heads off. I hope I get the reliability that I’m after. This is the most I’ve ever done to a bike at one time. Wish me luck, I need it, hasn’t been on the road yet.

My short list of the work:
Fullsac dx header pipe ceramic coated inside too, 2.25 muffler cores

I hope to see ya on the road  :orange:

Congrats, that is a lot of work, where did you get your Fullsac Header Ceramic coated (Is it Dipped) ????
Title: Re: What did you do to or on your CVO today?
Post by: BostonboyDH on May 20, 2019, 09:39:59 AM
Got to heat cycle my build today, had one small oil leak at the Jagg adapter where the oil lines hook up, problem solved. It seems like it’s gonna be a good ride. I’m just a parts changer, along with a few speciality tools I got the job done. All the work was done by me except I did send the heads off. I hope I get the reliability that I’m after. This is the most I’ve ever done to a bike at one time. Wish me luck, I need it, hasn’t been on the road yet.

My short list of the work:

S&S 4 3/8 crankshaft
SE lefty bearings both sides
S&S oil pump/plate
TTS 150 cams
SE tapered pushrods
S&S premium lifters
New jugs/pistons (Harley) 10.0 compression, stock, maybe
.030 head gaskets
SE rocker supports
S&S rockers
rocker lockers
Stock heads cleaned up/new components
SE 58mm throttle body, 5.3 injectors
Fullsac dx header pipe ceramic coated inside too, 2.25 muffler cores
Jagg fan assisted oil cooler
Replaced all sensors
Baker DD7
Baker +1.5 oil pan
Baker inner primary bearing
Baker shift arm
 clutch hub bearing
Throwout bearing
Primary chain
SE chain adjuster
Rebuilt starter
Alto carbonate clutch pak, Aim 95 lockup, 380# spring
Swing arm bearings
New pulley/belt/ sprocket
Ceramic hybrid wheel bearings
Handlebar bushings
Neck bearings
Motor mount
Tires, Avon cobra
Seals and gaskets

I hope to see ya on the road  :orange:

 
     Id'e Guess you'll be keeping that 09 SERG around for awhile!!! :D ....
BostonBoy
Title: Re: What did you do to or on your CVO today?
Post by: michaelokielee@yahoo.com on May 21, 2019, 07:37:02 AM
Added the Flag  :pepper:
Title: Re: What did you do to or on your CVO today?
Post by: bbrown on May 21, 2019, 07:46:40 AM
Nice rider back rest.  What is it?  Is that the stock seat?
Title: Re: What did you do to or on your CVO today?
Post by: michaelokielee@yahoo.com on May 21, 2019, 08:38:25 AM
Nice rider back rest.  What is it?  Is that the stock seat?

Thanks, too old to ride without one now!  Ordered it from: http://cvobackrest.com  .  It is the stock seat, I got the Red Stitched Hammock and backrest from the 2019 Limited CVO when the King Tour Pack is installed for the Boss.
Title: Re: What did you do to or on your CVO today?
Post by: noharley on May 21, 2019, 02:52:22 PM
Gunship mascara...

(https://live.staticflickr.com/65535/47849843912_edb15d4b45.jpg) (https://flic.kr/p/2fUjXwQ) (https://flic.kr/p/2fUjXwQ)   (https://www.flickr.com/photos/152360342@N02/)

(https://live.staticflickr.com/65535/46985850075_30a59c594b.jpg) (https://flic.kr/p/2ezYLgn) (https://flic.kr/p/2ezYLgn)   (https://www.flickr.com/photos/152360342@N02/)

Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on May 21, 2019, 04:05:16 PM
Ringz look good too!
Title: Re: What did you do to or on your CVO today?
Post by: noharley on May 21, 2019, 05:08:46 PM
Ringz look good too!

Thanks Kelly....
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on May 21, 2019, 08:58:03 PM
That flag looks pretty good.
Title: Re: What did you do to or on your CVO today?
Post by: TN on May 22, 2019, 06:56:53 AM
Congrats Phil... that's one long @$$ laundry list... job well done. :2vrolijk_21:

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:

Thanks Gary, I ain't out the woods yet, just part of my 10yr maintenance plan.  :drink: I've been collecting parts for this a few years now. Still got a few on the shelf.  8)



     Id'e Guess you'll be keeping that 09 SERG around for awhile!!! :D ....
BostonBoy

She's a keeper  :2vrolijk_21: I got too much blood, sweat and tears to think otherwise  :orange:

Congrats, that is a lot of work, where did you get your Fullsac Header Ceramic coated (Is it Dipped) ????

It was a DIY job using this https://www.eastwood.com/eastwood-hi-temp-internal-exhaust-coating-w-nozzle.html pretty good stuff as I have used it before. I see you're from Savannah, I reside about 20mi up Savannah River from Savannah myself, on the other side of the river. 

Just Ride



Title: Re: What did you do to or on your CVO today?
Post by: michaelokielee@yahoo.com on May 22, 2019, 07:28:01 AM
That flag looks pretty good.

Thank you Sir!
Title: Re: What did you do to or on your CVO today?
Post by: noharley on May 22, 2019, 09:13:29 AM
Added the Flag  :pepper:

Cool...
Title: Re: What did you do to or on your CVO today?
Post by: rheiner on May 22, 2019, 12:01:41 PM
Got to heat cycle my build today, had one small oil leak at the Jagg adapter where the oil lines hook up, problem solved. It seems like it’s gonna be a good ride. I’m just a parts changer, along with a few speciality tools I got the job done. All the work was done by me except I did send the heads off. I hope I get the reliability that I’m after. This is the most I’ve ever done to a bike at one time. Wish me luck, I need it, hasn’t been on the road yet.

My short list of the work:

S&S 4 3/8 crankshaft
SE lefty bearings both sides
S&S oil pump/plate
TTS 150 cams
SE tapered pushrods
S&S premium lifters
New jugs/pistons (Harley) 10.0 compression, stock, maybe
.030 head gaskets
SE rocker supports
S&S rockers
rocker lockers
Stock heads cleaned up/new components
SE 58mm throttle body, 5.3 injectors
Fullsac dx header pipe ceramic coated inside too, 2.25 muffler cores
Jagg fan assisted oil cooler
Replaced all sensors
Baker DD7
Baker +1.5 oil pan
Baker inner primary bearing
Baker shift arm
 clutch hub bearing
Throwout bearing
Primary chain
SE chain adjuster
Rebuilt starter
Alto carbonate clutch pak, Aim 95 lockup, 380# spring
Swing arm bearings
New pulley/belt/ sprocket
Ceramic hybrid wheel bearings
Handlebar bushings
Neck bearings
Motor mount
Tires, Avon cobra
Seals and gaskets

I hope to see ya on the road  :orange:

That's an impressive list of items. I hope for your sake you didn't just use that small lift holding your bike up in the picture. You deserve a nice big table lift for all of that work.
Title: Re: What did you do to or on your CVO today?
Post by: TN on May 23, 2019, 09:04:26 PM
That's an impressive list of items. I hope for your sake you didn't just use that small lift holding your bike up in the picture. You deserve a nice big table lift for all of that work.

Yer dissing my lift?  8) show me yours and I'll show you mine


I got 58 mi on her today, changed fluids. So far so good.  :orange:


Just Ride
Title: Re: What did you do to or on your CVO today?
Post by: OBB on May 23, 2019, 10:02:00 PM
Yer dissing my lift?  8) show me yours and I'll show you mine


I got 58 mi on her today, changed fluids. So far so good.  :orange:


Just Ride


Sent from my boring Droid phone.

Title: Re: What did you do to or on your CVO today?
Post by: lyn.husen on May 23, 2019, 11:31:57 PM
Just rode mine, 28 days till right knee replacement then riding till November


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on May 27, 2019, 04:30:10 PM
15,000 mile service in the books on my 2019 CVO Street Glide.
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on May 27, 2019, 08:08:38 PM
Had a bad head injury in late February in vail. Haven't been riding in a while but I get out there every weekend and start em up.   I go for a scan on Thursday.  I'm doing much better now and hoping to get the green light to be able to start riding again soon.  :nervous:Wish me luck. Hoping for a good report. Stuart
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on May 27, 2019, 08:55:56 PM
Had a bad head injury in late February in vail. Haven't been riding in a while but I get out there every weekend and start em up.   I go for a scan on Thursday.  I'm doing much better now and hoping to get the green light to be able to start riding again soon.  :nervous:Wish me luck. Hoping for a good report. Stuart
Good luck... wishing you all the best. :2vrolijk_21:

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on May 27, 2019, 09:16:54 PM
 best of luck stu ... im suppose to get an MRI of the brain same day (if insurance stars line up)
Title: Re: What did you do to or on your CVO today?
Post by: Robmay on May 28, 2019, 11:49:17 AM
Well wishes for you Stu!


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Boatman on May 28, 2019, 01:23:31 PM
Get better fast Stuart!  Praying for a full recovery buddy.  🙏
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on May 28, 2019, 02:14:50 PM
Had a bad head injury in late February in vail. Haven't been riding in a while but I get out there every weekend and start em up.   I go for a scan on Thursday.  I'm doing much better now and hoping to get the green light to be able to start riding again soon.  :nervous:Wish me luck. Hoping for a good report. Stuart

That skiing deal can be very dangerous, Stu.  I'd stick to the much less so sport of motorcycling if'n I were you... ::) :huepfenjump3: :bananarock: :nervous: :huepfenlol2:

...I understand the medical holdups so prayers and well wishes on the results.

best of luck stu ... im suppose to get an MRI of the brain same day (if insurance stars line up)

Prayers for your results, too, Fred... :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: johnsachs on May 28, 2019, 06:18:56 PM
 GOOD LUCK !!!
You're looking good with the exercise, and weight loss diet. I'm sure the injury is a thing of the past. Good seeing you last week.
John
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on May 28, 2019, 08:30:34 PM
Praying you continue to recover and can ride soon Stu.
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on May 30, 2019, 06:50:21 PM
Thanks to all for the thoughts and prayers.  Had a cat scan today and waiting for some positive feedback.  Crossing fingers here.    Appreciate everything.  Stuart.  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: johnsachs on May 30, 2019, 06:59:45 PM
Thanks to all for the thoughts and prayers.  Had a cat scan today and waiting for some positive feedback.  Crossing fingers here.    Appreciate everything.  Stuart.  :2vrolijk_21:
I know you're 100 %. When I saw you 2 weeks ago, you looked better than you ever have. Besides the stress of your business would have kicked your ass by now.  ;)
John
Title: Re: What did you do to or on your CVO today?
Post by: imoo6170 on June 04, 2019, 10:03:59 PM
Added a lower spoiler to my FXSTSSE3 - 57040-08DH Softail Spoiler Vivid Black
Title: Re: What did you do to or on your CVO today?
Post by: imoo6170 on June 04, 2019, 10:09:17 PM
Went back to the standard headers with Screaming Eagle slip-ons my FXSTSSE3. Previously had the V&H 2 into 2 Radius.

No difference in performance (at least from the seat of my pants perspective) but a big diff in noise and now I can get around a right hander corner so much easier  :)
Title: Re: What did you do to or on your CVO today?
Post by: Spindrifter on June 05, 2019, 04:15:37 PM
Added 14” Carlini bars and Love Jugs cooling fans
Title: Re: What did you do to or on your CVO today?
Post by: LuvGun on June 05, 2019, 05:01:09 PM
Put on the Yaffe plate frame
Title: Re: What did you do to or on your CVO today?
Post by: noharley on June 05, 2019, 05:29:37 PM
Added 14” Carlini bars and Love Jugs cooling fans

Badazz bike...
Title: Re: What did you do to or on your CVO today?
Post by: OBB on June 05, 2019, 08:16:10 PM
Added 14” Carlini bars and Love Jugs cooling fans
I have yet to see that bike in that color scheme in person. All the pix of them though really catch my eye.

Sent from my boring Droid phone.

Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on June 06, 2019, 05:41:58 AM
For those who were kind enough with the nice thoughts.. I had my Dr appointment yesterday. All good news and can get back to normal activities.   I am hanging up my skis.  No roller-coasters.  But I can get back on the bike.   Yes,   it was a great day yesterday.     Stuart.   :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Robmay on June 06, 2019, 06:36:05 AM
Awesome news Stu.


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on June 06, 2019, 06:53:25 AM
Praise be to God, Stu
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on June 06, 2019, 12:03:37 PM
That's great news.  Congrats  :2vrolijk_21: .
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on June 06, 2019, 12:58:03 PM
Great news Stu. :2vrolijk_21:

 :pumpkin:
Ride Safe,
Fired00d
 :pumpkin:
Title: Re: What did you do to or on your CVO today?
Post by: Mr. Warlock on June 06, 2019, 03:19:11 PM
Awesome News !!! :2vrolijk_09:
Title: Re: What did you do to or on your CVO today?
Post by: CVODON on June 06, 2019, 03:38:56 PM
Best wishes Stu
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on June 06, 2019, 07:32:15 PM
Thank you all. I want to say something.   I'm not religious or never claimed to be.  I had so many friends say to me that they were going to say a prayer for me. I thanked every single one of them.  I think it helped. I can say that I am am an extremely lucky person.     Thank you all again.    Just me.  ::)
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on June 07, 2019, 11:32:26 AM
Glad everything went your way Stu, congrats and ride on!!
Title: Re: What did you do to or on your CVO today?
Post by: floresb on June 07, 2019, 07:48:26 PM
Praise be to God, Stu

x2.  :pepper: :pepper:
Title: Re: What did you do to or on your CVO today?
Post by: TomBolt16CVO on June 09, 2019, 02:13:23 AM
New rear Öhlins shocks, courtesy of Carol Burks. Installed and dialed in to my specifications. Have a 250 mile test drive on tap for tomorrow!  I’m excited to feel how much better this set up is over stock CVO shocks.
Title: Re: What did you do to or on your CVO today?
Post by: FreestateSE3 on June 09, 2019, 09:45:47 AM
WildOne Chubbys, H-D Spot Mirrors (painted Satin Black), Motolights..🤓
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on June 12, 2019, 07:09:46 AM
Sold it....CVO no mo... ;D
Title: Re: What did you do to or on your CVO today?
Post by: bbrown on June 12, 2019, 10:35:36 AM
Sold it....CVO no mo... ;D

SERIOUSLY????
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on June 12, 2019, 12:29:44 PM
SERIOUSLY????

Yep....it b gone...

...replaced with this...
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on June 12, 2019, 03:53:17 PM
Yep....it b gone...

...replaced with this...
Congrats!!! Was wondering the other day when you posted you were picking this up if you were going to keep your CVO too. Many miles of smiles w/your new ride. :2vrolijk_21:

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on June 12, 2019, 05:23:40 PM
Yep....it b gone...

...replaced with this...
  dang... I was told that if you hang out in a barber shop long enough you'll end up with a hair cut
Title: Re: What did you do to or on your CVO today?
Post by: bbrown on June 12, 2019, 06:19:40 PM
Very Nice
Title: Re: What did you do to or on your CVO today?
Post by: PBSTN on June 13, 2019, 12:16:20 AM
Yep....it b gone...

...replaced with this...
Nice ride. Enjoy.
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on June 13, 2019, 01:05:03 AM
 been between jobs for the first time since high school for the last couple of months so been riding almost every day like a crazy man and loving it! Thats the good news, bad news is last week I hit a patch of oil on a downhill off camber turn and ended up high siding at about 20+ MPH. was wearing my Langlitz leather jacket with Bohn armor underneath, Held Titan race gloves and my AGV Carbon Sportmodular helmet. I sometimes question myself for spending what I do for my riding gear but I sure as he-- never will again! first thing that hit the asphalt was my helmet and then hit hard after on my elbow and shoulder and rolled almost burning through the titanium knuckle covers on my gloves.
great news is other than being bruised up like crazy I didn't have a bit of road rash and not even a headache (helmet looked like it was thrown from a 4 story building..) which was amazing!
Bad news is I got the estimate today and it did almost 16K of damage. Thank God for insurance! I immediately ordered the same helmet and gloves which insurance paid most of ($1000 limit) and hopefully will not give me a hard time over the dealers estimate. Dealer is replacing all painted parts so I won't haver to worry about tryin g to have a painter trying to match the Mako Shark fade which I was very worried about when It first happened. Only bad thing about that is we all know how long the wait is for the painted parts from the MoCo. At least I feel like the bike will be perfect when it is done.
For anyone debating whether the high dollar gear is worth it I absolutely will say it is!
I started my new job yesterday and it could have been a whole different beginning for me if I was not wearing what I was..
Title: Re: What did you do to or on your CVO today?
Post by: CHH_Badkarma on June 13, 2019, 05:52:27 AM
Glad you were wearing the right gear. You are right, things could have gone very differently
I never squid it anymore. That nagging voice starts cautioning me in my head when I think about it. The least I will ever wear is a Rev'it tornado 2 jacket, Klim jeans and gloves and a Shoie or Simpson brain bucket. I'm old enough to know things don't heal like thet used so do the best I can to mitigate damage
Title: Re: What did you do to or on your CVO today?
Post by: OBB on June 13, 2019, 07:47:28 AM
been between jobs for the first time since high school for the last couple of months so been riding almost every day like a crazy man and loving it! Thats the good news, bad news is last week I hit a patch of oil on a downhill off camber turn and ended up high siding at about 20+ MPH. was wearing my Langlitz leather jacket with Bohn armor underneath, Held Titan race gloves and my AGV Carbon Sportmodular helmet. I sometimes question myself for spending what I do for my riding gear but I sure as he-- never will again! first thing that hit the asphalt was my helmet and then hit hard after on my elbow and shoulder and rolled almost burning through the titanium knuckle covers on my gloves.
great news is other than being bruised up like crazy I didn't have a bit of road rash and not even a headache (helmet looked like it was thrown from a 4 story building..) which was amazing!
Bad news is I got the estimate today and it did almost 16K of damage. Thank God for insurance! I immediately ordered the same helmet and gloves which insurance paid most of ($1000 limit) and hopefully will not give me a hard time over the dealers estimate. Dealer is replacing all painted parts so I won't haver to worry about tryin g to have a painter trying to match the Mako Shark fade which I was very worried about when It first happened. Only bad thing about that is we all know how long the wait is for the painted parts from the MoCo. At least I feel like the bike will be perfect when it is done.
For anyone debating whether the high dollar gear is worth it I absolutely will say it is!
I started my new job yesterday and it could have been a whole different beginning for me if I was not wearing what I was..
WOW!!! Scary story. Very glad you're still around to tell us about it. Testimonial about the use of proper safety gear.

Good luck with the new job.

Sent from my boring Droid phone.

Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on June 13, 2019, 08:28:33 AM
Alan, glad you are OK (except for the bruising) and metal/fiberglass/plastic can be replaced much better than flesh and bone heals... :2vrolijk_21:

As OBB stated, that's a great topic for a safety minute and the effectiveness of safety equipment (PPE) with your new job...matter of fact, I may use it in one of mine.

Silly question but do you have a picture of the bike?  That would put you walking away in a greater perspective. 
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on June 13, 2019, 09:17:35 AM
  dang... I was told that if you hang out in a barber shop long enough you'll end up with a hair cut

Hair cut, beard trim, manicure and colonoscopy... :huepfenlol2:

By the way, I don't plan on going anywhere else on the interweb...CVOHarley is my home base and will stay that way no matter what I decide to ride today or down the road.  Besides, lately we've had quite a bit of information on other brands so why leave?  Y'all b my interweb family.

I also promise not to be "that guy" that buys another brand and then tries to convince everyone else how good it is and how bad everything else is comparably...not gonna be a di-k.  I still have a fondness for the MoCo but have earned the right over the past 30 plus years of Harley ownership and 45 years of experience with them to change my colors from time to time... ;D

....as Hubbard loves to say "thus endeth the lesson"
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on June 13, 2019, 10:54:30 AM
  ;): it is good looking scooter for sure
Title: Re: What did you do to or on your CVO today?
Post by: michaelokielee@yahoo.com on June 14, 2019, 06:57:29 AM
  ;): it is good looking scooter for sure

Lost a Keyfob a month ago >:( Had the new Keyfob programmed, set a new security code and added the new stereo update - No charge, thanks Savannah HD :pepper:
Title: Re: What did you do to or on your CVO today?
Post by: BostonboyDH on June 14, 2019, 03:49:38 PM

            Finally took Romeo out first ride of the season to get an inspection sticker then about 20 miles round trip for a shakedown, felt great now back to homework :-X
Title: Re: What did you do to or on your CVO today?
Post by: CHH_Badkarma on June 14, 2019, 04:54:23 PM
(https://live.staticflickr.com/65535/48063299391_8300a26525_c.jpg) (https://flic.kr/p/2gebYpH)

Got caught snoozin at the stoplight

Girlfriend snuck up on me at a stoplight. Phone rings inside my helmet. "Look to your right" haha
Title: Re: What did you do to or on your CVO today?
Post by: noharley on June 14, 2019, 09:34:29 PM
^^that's a bad ride. Well done.
Title: Re: What did you do to or on your CVO today?
Post by: CHH_Badkarma on June 14, 2019, 09:46:46 PM
Thank you😁
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on June 15, 2019, 12:49:48 AM
Alan, glad you are OK (except for the bruising) and metal/fiberglass/plastic can be replaced much better than flesh and bone heals... :2vrolijk_21:

As OBB stated, that's a great topic for a safety minute and the effectiveness of safety equipment (PPE) with your new job...matter of fact, I may use it in one of mine.

Silly question but do you have a picture of the bike?  That would put you walking away in a greater perspective.
Bike already torn apart and waiting for painted parts (going to drive me crazy..). Geico was terrific and didn't argue with anything dealer asked for. Everything will be replaced with new which is great. I will always use Geico going forward.
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on June 15, 2019, 11:49:42 AM
New set of shoes installed yesterday after 16k on originals. Heading for Nevada City, California tomorrow via Bend Or. and then down Hwy 97, for a couple days to see my youngest daughter and grandkids, then back home up the PCH and Hwy 101 along the Oregon Coast.
Title: Re: What did you do to or on your CVO today?
Post by: TimP on June 15, 2019, 04:51:02 PM
CHH-Badkarma
Beautiful bike...what helmet is that you are wearing. I live in Illinois and typically only use one when required by law. The one I currently have is too old, time for a new one. Looks like yours is carbon fiber. The older I get the more I think about wearing one all the time.
Title: Re: What did you do to or on your CVO today?
Post by: CHH_Badkarma on June 15, 2019, 06:35:21 PM
Its the Simpson Ghost Bandit in carbon fiber with mirrored shield.
Got it as my warm weather lid. It has much more airflow over the top of the head than my Shoei RF-1200 and that makes a huge difference on my bald head.
I was tempted to get Simpson's new modular helmet but it does not have as much airflow
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on June 15, 2019, 06:55:11 PM
(https://live.staticflickr.com/65535/48063299391_8300a26525_c.jpg) (https://flic.kr/p/2gebYpH)

Got caught snoozin at the stoplight

Girlfriend snuck up on me at a stoplight. Phone rings inside my helmet. "Look to your right" haha
Did you reply.... "Was just thinking about you that's why I wasn't paying attention to cars around me."  8) :D :D

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: CHH_Badkarma on June 15, 2019, 07:02:10 PM
Nope. Can't tell one POS Nissan from another until the tinted window rolls down. All those little chitbox cars look the same to me
Title: Re: What did you do to or on your CVO today?
Post by: TimP on June 16, 2019, 10:50:06 AM
Its the Simpson Ghost Bandit in carbon fiber with mirrored shield.
Got it as my warm weather lid. It has much more airflow over the top of the head than my Shoei RF-1200 and that makes a huge difference on my bald head.
I was tempted to get Simpson's new modular helmet but it does not have as much airflow

Thanks
Title: Re: What did you do to or on your CVO today?
Post by: RivRaptor on June 18, 2019, 10:44:10 PM
Installed new 14" Bars that I received for Father's Day
Title: Re: What did you do to or on your CVO today?
Post by: Armoli on June 20, 2019, 06:39:01 PM
Ordered a new seat from c&c
Waiting for delivery now
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on June 20, 2019, 07:32:55 PM
Ordered a new seat from c&c
Waiting for delivery now


That's a nice looking saddle.  Like that a LOT :2vrolijk_21: .
Title: Re: What did you do to or on your CVO today?
Post by: rbaker on June 21, 2019, 06:38:31 AM
Rode to Bagdad Arizona for lunch at " The Diner ".
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on June 23, 2019, 12:50:32 AM
 replaced the battery, the OE batt just didn't act like it should but it never did... now she cranks up good...    so I rode it.  one of these days im going to give it a bath
Title: Re: What did you do to or on your CVO today?
Post by: Armoli on June 23, 2019, 01:39:42 AM

That's a nice looking saddle.  Like that a LOT :2vrolijk_21: .
thanks,, was torn between C&C and Corbin but corbin's customer service is scary
Title: Re: What did you do to or on your CVO today?
Post by: Armoli on June 23, 2019, 01:41:03 AM
Installed new 14" Bars that I received for Father's Day
they look nice, any problem with wiring?? thinking about changing mine and cant decide and I am afraid Im gonna mess up the heated grips
Title: Re: What did you do to or on your CVO today?
Post by: Supershooter on June 23, 2019, 10:07:00 PM
I wired in a plug for my wife's new heated jacket. Happy wife, happy life.

Supershooter
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on June 25, 2019, 08:47:44 PM
Yep....it b gone...

...replaced with this...

Wow, this is a surprise, nice looking Indian.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on June 25, 2019, 08:53:26 PM
been between jobs for the first time since high school for the last couple of months so been riding almost every day like a crazy man and loving it! Thats the good news, bad news is last week I hit a patch of oil on a downhill off camber turn and ended up high siding at about 20+ MPH. was wearing my Langlitz leather jacket with Bohn armor underneath, Held Titan race gloves and my AGV Carbon Sportmodular helmet. I sometimes question myself for spending what I do for my riding gear but I sure as he-- never will again! first thing that hit the asphalt was my helmet and then hit hard after on my elbow and shoulder and rolled almost burning through the titanium knuckle covers on my gloves.
great news is other than being bruised up like crazy I didn't have a bit of road rash and not even a headache (helmet looked like it was thrown from a 4 story building..) which was amazing!
Bad news is I got the estimate today and it did almost 16K of damage. Thank God for insurance! I immediately ordered the same helmet and gloves which insurance paid most of ($1000 limit) and hopefully will not give me a hard time over the dealers estimate. Dealer is replacing all painted parts so I won't haver to worry about tryin g to have a painter trying to match the Mako Shark fade which I was very worried about when It first happened. Only bad thing about that is we all know how long the wait is for the painted parts from the MoCo. At least I feel like the bike will be perfect when it is done.
For anyone debating whether the high dollar gear is worth it I absolutely will say it is!
I started my new job yesterday and it could have been a whole different beginning for me if I was not wearing what I was..

Glad to year your okay, other than bruised up and banged up.  You are correct about good gear.  Two years ago it really minimized my wife's injury's when she went down on the interstate.  No road rash, but broken ribs and shoulder and wrist.  Only a 8 hour hospital stay.

Knowing this, I still often times do not wear all the gear all the time.
Title: Re: What did you do to or on your CVO today?
Post by: BigLock on June 26, 2019, 08:47:17 PM
Just got back from the HOG Rally in VA.this weekend so today I changed the oil in Black Betty.
Title: Re: What did you do to or on your CVO today?
Post by: T-Roy on June 30, 2019, 10:26:25 AM
Yep....it b gone...

...replaced with this...

I just saw that you went with Indian like I did. The dealership I bought my 2019 Chieftain from had a 2018 Chieftain in the same color you got. If I would have wen the 2018 route that is the color I would have got. Sure is a Beautiful bike!! Congrats!!
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on June 30, 2019, 07:47:16 PM
Kville Indian had your bike, too. My favorite color on the 2019 chieftain limited. Saw it in the sunshine at one of their demo events and it's a beauty. The redesign 2019 faring on the chieftains are growing on me and I really like the new design saddlebags but the '18 in that black pearl had caught my eye ever since Sturgis 2017 and the like never faded over the months.

Plus it's half the price and, in my opinion, twice the bike as my '15 was and I really liked that SERGU
Title: Re: What did you do to or on your CVO today?
Post by: Tony Smith on July 02, 2019, 05:43:02 AM
Got the pak from my 17 prepped for 19 paint, aux lights and heated suit switches and passenger floor boards ready for installation.  Just waiting on the fullsac 2.25 baffles, Vance & Hines tuner then I’m gonna tear the exhaust off this thing and he’s gonna lose his cat. Pics to follow...

(https://uploads.tapatalk-cdn.com/20190702/7340e9647b62acb9197d963fd28098db.jpg)(https://uploads.tapatalk-cdn.com/20190702/5c25b337f9d01aaecca81ecce2a32624.jpg)


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Jock on July 08, 2019, 08:07:38 PM
Took bike in for the 70,000 mile service and the warranty repair of my fifth compensator!  This one had less than 6,000 miles on it.

 :(
Title: Re: What did you do to or on your CVO today?
Post by: bbrown on July 08, 2019, 10:22:18 PM
Took bike in for the 70,000 mile service and the warranty repair of my fifth compensator!  This one had less than 6,000 miles on it.

 :(
Omg
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on July 09, 2019, 12:10:27 AM
Ordered a Corbin Classic Solo with passenger pillion and riders oval backrest. The stock seat was the best stock Harley seat I had ever experienced until I hit about 17k and then I seemed to need more frequent stops to keep monkey butt at bay. Must be the foam breaking down, or my bonyass gettin bonier.  :nixweiss:
Anyway it should be here in about 3 weeks.
Title: Re: What did you do to or on your CVO today?
Post by: Unko on July 11, 2019, 07:32:34 PM
Installed a Baker compensator with an M8 chain tensioner on my 2007 FLHRSE3. The stock compensator spring plates were loose and causing occasional backfire on startup, and clunking noise when turning bike off. Went through a battery and a starter because of it. Running fine now. Gonna replace the cam chain tensioners next. Looking at the ones made by Zipperʻs.
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on July 12, 2019, 11:29:59 AM
 got the RENTAL packed up and heading out to Tenn. , NC area. and most likely hit the dragon.... need a new sticker  :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: WildmanUltra on July 12, 2019, 09:56:41 PM
I rode over to ID yesterday to get the bike worked on by Rick at Soft Brake. Well I think I must have killed a few thousand bugs on the ride home so the bike needed a bath REAL bad.

(https://img.photobucket.com/albums/v654/wildman4x4nut/CVO%20Road%20Glide%20Ultra/20190712_152806_zpszdmyq7oq.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: michaelokielee@yahoo.com on July 15, 2019, 09:03:18 AM
Late post from last weekend, went up to Murphy NC for the weekend and went to Copperhead Lodge, Cherohala Skyway and Hwy 64 Gym in Tennessee just to name a few :pepper:
Title: Re: What did you do to or on your CVO today?
Post by: OBB on July 15, 2019, 12:40:11 PM
Cleaned the rear caliper from all the built up brake dust. It was causing a horrible racket during low speed heavy rear braking.

Sent from my boring Droid phone.

Title: Re: What did you do to or on your CVO today?
Post by: TN on July 16, 2019, 07:21:20 PM
Just Ride.  :orange:
Title: Re: What did you do to or on your CVO today?
Post by: Tony Smith on July 17, 2019, 06:41:59 AM
Late post from last weekend, went up to Murphy NC for the weekend and went to Copperhead Lodge, Cherohala Skyway and Hwy 64 Gym in Tennessee just to name a few :pepper:

Wow. That is one smooth looking shark


Tony
Title: Re: What did you do to or on your CVO today?
Post by: michaelokielee@yahoo.com on July 17, 2019, 08:33:47 AM
Wow. That is one smooth looking shark

Tony

Thank you Sir, labor of love :pepper:
Title: Re: What did you do to or on your CVO today?
Post by: michaelokielee@yahoo.com on July 22, 2019, 01:56:14 PM
Removed the bags and side covers, put her on the lift and she got a full wax top to bottom.  I wish I could get her dirty by riding to Sturgis next week! :pepper:
Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on July 22, 2019, 06:44:28 PM
Had the 20,000 mile service done today.(https://uploads.tapatalk-cdn.com/20190722/598659ae732afcc2d89e9ea37672adf6.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on July 22, 2019, 07:51:33 PM
Nice Joe!....Right behind ya, rolled 19k today. Damn 6 day work week keeps gettin in the way of my riding and I don't ride it to work!  :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: dayne66 on July 22, 2019, 08:17:51 PM
Cleaned the rear caliper from all the built up brake dust. It was causing a horrible racket during low speed heavy rear braking.

Sent from my boring Droid phone.


What kind of racket? Kind of a rattle -slam?
Title: Re: What did you do to or on your CVO today?
Post by: OBB on July 22, 2019, 10:21:28 PM
What kind of racket? Kind of a rattle -slam?

More of a grinding noise. It was weird. Only happened at the very end of coming to a stop. Didn't do it all the time either. The dust/dirt was caked in there pretty good. Took some brake dust cleaner and a toothbrush to the calipers to get all that gunk off.
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on July 23, 2019, 06:32:32 PM
More of a grinding noise. It was weird. Only happened at the very end of coming to a stop. Didn't do it all the time either. The dust/dirt was caked in there pretty good. Took some brake dust cleaner and a toothbrush to the calipers to get all that gunk off.
    mine dose that when brake is cold, then ok after warmed up.... some times. I even changed pads out to Lindal's   and same thing
Title: Re: What did you do to or on your CVO today?
Post by: CVODON on July 24, 2019, 12:23:36 PM
You can keep that brake dust buildup from minimal to nothing by just Liberally spraying Eagle 1 A-2-Z tire and brake cleaner down into the center of the caliper everytime you wash the bike. Mine look like new, no dust or buildup of any amount. I also do the cars and truck, buy the Stuff in a Half Gallon pump spray bottle at Pep Boys when on sale or Amazon always has it. I use it on everything from the Ceramic tile in shower to the vehicles. It is also safe for painted surfaces such as powder coated wheels or edge of fender while spraying and the brown dirt that rolls off the tires, even when they look clean, it pretty amazing.
Only other thing I notice is I remove bags/seat/cover breather & radio and thoroughly wash the bike weekly. But brake dust does accumulate pretty fast and is actually metallic particles that rust and corrode.
Title: Re: What did you do to or on your CVO today?
Post by: HOGMIKE on July 24, 2019, 02:04:47 PM
Just Ride.  :orange:


Agree!
🛵
Title: Re: What did you do to or on your CVO today?
Post by: HOGMIKE on July 24, 2019, 02:26:07 PM
Black sand beach on the west coast
Title: Re: What did you do to or on your CVO today?
Post by: HOGMIKE on July 24, 2019, 02:28:31 PM
Not a very good road for a cvo, maybe next time on an adventure bike!
Title: Re: What did you do to or on your CVO today?
Post by: OBB on July 24, 2019, 02:38:44 PM
You can keep that brake dust buildup from minimal to nothing by just Liberally spraying Eagle 1 A-2-Z tire and brake cleaner down into the center of the caliper everytime you wash the bike. Mine look like new, no dust or buildup of any amount. I also do the cars and truck, buy the Stuff in a Half Gallon pump spray bottle at Pep Boys when on sale or Amazon always has it. I use it on everything from the Ceramic tile in shower to the vehicles. It is also safe for painted surfaces such as powder coated wheels or edge of fender while spraying and the brown dirt that rolls off the tires, even when they look clean, it pretty amazing.
Only other thing I notice is I remove bags/seat/cover breather & radio and thoroughly wash the bike weekly. But brake dust does accumulate pretty fast and is actually metallic particles that rust and corrode.
I think I have a bottle of that at home I picked up for the wheels on the car. I will double check when I get home. If that's what it is though it stated on their not to use on motorcycles. Again I will double check when I get home to verify this

Sent from my boring Droid phone.

Title: Re: What did you do to or on your CVO today?
Post by: CVODON on July 24, 2019, 03:03:33 PM
FYI; I have a couple gallons of Eagle 1 A-2-Z on hand. I went out and checked, no where could I find anything saying not to use on Motorcycles. I have been using this stuff, liberally, since the '90's. It is not a etching product and I promise will not hurt anything on the bike in the brake/suspension category that is COOL. I personally would not use any cleaning product on a hot surface. I literally drowned the wheels/tires/brake rotors & brake calipers. Lightly scrub the tires and use a micro fiber sponge on the wheels & brakes.
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on July 24, 2019, 03:51:54 PM
FYI; I have a couple gallons of Eagle 1 A-2-Z on hand. I went out and checked, no where could I find anything saying not to use on Motorcycles. I have been using this stuff, liberally, since the '90's. It is not a etching product and I promise will not hurt anything on the bike in the brake/suspension category that is COOL. I personally would not use any cleaning product on a hot surface. I literally drowned the wheels/tires/brake rotors & brake calipers. Lightly scrub the tires and use a micro fiber sponge on the wheels & brakes.
Is the attached picture the product you are speaking of? Wanted to make sure since it doesn't include "brake cleaner" on it. TIA.

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: OBB on July 24, 2019, 09:14:32 PM
Is the attached picture the product you are speaking of? Wanted to make sure since it doesn't include "brake cleaner" on it. TIA.

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
That's the same stuff I have. I got home from work and was there long enough to get a shower and forgot to look at the bottle. Now at the hospital with my daughter waiting on my first granddaughter to get here.

Forgot to add, that stuff works great on my car wheels.

Sent from my boring Droid phone.
Title: Re: What did you do to or on your CVO today?
Post by: bigchuck on July 24, 2019, 10:36:39 PM
That's the same stuff I have. I got home from work and was there long enough to get a shower and forgot to look at the bottle. Now at the hospital with my daughter waiting on my first granddaughter to get here.

Forgot to add, that stuff works great on my car wheels.

Sent from my boring Droid phone.


Congratulations. Saying a little prayer for mom and baby
Title: Re: What did you do to or on your CVO today?
Post by: OBB on July 24, 2019, 10:37:57 PM
Congratulations. Saying a little prayer for mom and baby
Thanks Chuck.

Sent from my boring Droid phone.

Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on July 25, 2019, 12:16:24 AM
dealer called and said bike would be ready tomorrow after 6 weeks recovering from my little "get off". $21K later (thank God for Geico..) I am excited to get it back on the road..
Title: Re: What did you do to or on your CVO today?
Post by: OBB on July 25, 2019, 02:23:32 AM
That didn't seem like it was that long ago. Glad it'll be ready for ya.

Sent from my boring Droid phone.

Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on July 25, 2019, 07:20:52 AM
That's the same stuff I have. I got home from work and was there long enough to get a shower and forgot to look at the bottle. Now at the hospital with my daughter waiting on my first granddaughter to get here.

Forgot to add, that stuff works great on my car wheels.

Sent from my boring Droid phone.
Thanks... I'll have to pick up a bottle.

Congrats on the new granddaughter!!!

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: TN on July 25, 2019, 10:32:33 AM

Agree!
🛵

Funny you post that pic as I'm trying to prepare myself mentally to be in that exact spot in late August. I've done some 1k solo rides lately and while my bike is sound I need some help.  :drink:

Just Ride
Title: Re: What did you do to or on your CVO today?
Post by: HOGMIKE on July 25, 2019, 02:04:37 PM
Funny you post that pic as I'm trying to prepare myself mentally to be in that exact spot in late August. I've done some 1k solo rides lately and while my bike is sound I need some help.  :drink:

Just Ride

If you’re planning Pikes Peak, do Mt Evans also, then you’ll have the highest paved road in the US!
You can do them both in one day.
 8)

If you’re talking the “Lost Coast” be careful. Long nasty gravel roads.
 :oops:
Title: Re: What did you do to or on your CVO today?
Post by: OBB on July 25, 2019, 08:19:25 PM
FYI; I have a couple gallons of Eagle 1 A-2-Z on hand. I went out and checked, no where could I find anything saying not to use on Motorcycles. I have been using this stuff, liberally, since the '90's. It is not a etching product and I promise will not hurt anything on the bike in the brake/suspension category that is COOL. I personally would not use any cleaning product on a hot surface. I literally drowned the wheels/tires/brake rotors & brake calipers. Lightly scrub the tires and use a micro fiber sponge on the wheels & brakes.
Was pretty sure I saw it on there. Last line in the yellow instructions written in English.(https://uploads.tapatalk-cdn.com/20190726/ab98d05119338a4d07b5a0acd8f92094.jpg)

Sent from my boring Droid phone.

Title: Re: What did you do to or on your CVO today?
Post by: CVODON on July 25, 2019, 11:14:20 PM
Mine doesn't have that line, but it is commercial grade container, not consumer & I have been & will continue to use it, liberally. Don't use it if you don't want to. But a chrome wheel is a chrome wheel, regardless of whether it is on a bike or semi.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on July 26, 2019, 05:55:38 AM
Mine doesn't have that line, but it is commercial grade container, not consumer & I have been & will continue to use it, liberally. Don't use it if you don't want to. But a chrome wheel is a chrome wheel, regardless of whether it is on a bike or semi.
Agreed 100%. I'd almost be willing to say it has the disclaimer due to people not properly rinsing off their tires/wheels thoroughly and this stuff being kinda slick. Smaller contact patch on a bike vs a car.
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on July 26, 2019, 07:22:36 AM
Agreed 100%. I'd almost be willing to say it has the disclaimer due to people not properly rinsing off their tires/wheels thoroughly and this stuff being kinda slick. Smaller contact patch on a bike vs a car.
When I read that I was wondering if it was "slick" and that was the concern. With that being said I would only use it on the wheels of my bike and not the tires. I do use tire dressing on the wheels of the bike but I don't get it on the treads for the reason they are probably concerned of.

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: OBB on July 26, 2019, 11:13:15 AM
When I read that I was wondering if it was "slick" and that was the concern. With that being said I would only use it on the wheels of my bike and not the tires. I do use tire dressing on the wheels of the bike but I don't get it on the treads for the reason they are probably concerned of.

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Not to be used as a tire dressing as I don't know anyone that does that. Comment directed at the point of trying to keep it off the tires while using it on the rims or getting any of it off of the tires that may make it's way onto them.

Sent from my boring Droid phone.

Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on July 26, 2019, 11:23:24 AM
Not to be used as a tire dressing as I don't know anyone that does that. Comment directed at the point of trying to keep it off the tires while using it on the rims or getting any of it off of the tires that may make it's way onto them.

Sent from my boring Droid phone.
I wasn't implying or thinking of using it as such... only commenting on the concern of it being slick as to not getting it on the tread. However, I do think that disclaimer is probably a "cover their @$$" statement to prevent any liability for the mis(stupid)use of the product. Since I do and have used on all my motorcycle tires some type of dressing to make them shine and probably if I had read the fine print on all the products I've used that disclaimer may have been on some/all of them. As long as you use caution and don't get any product that may be slick on the treads IMO it's a non issue.

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: groupw on July 26, 2019, 01:50:53 PM
If you’re planning Pikes Peak, do Mt Evans also, ......You can do them both in one day.

....... but i wouldn't
.... Pikes Peak is a 3 hr RT during tourist season
....... then ya gotta go 2 hrs north & west to get to the approach to Evans
...... that's about when the thunderclouds roll in , and you don't really want to be above tree line in a thunder/lightning event.

ps: Pikes Peak highway is also closed to private vehicles above Glen Cove, to enable construction of the New Summit house.  free Shuttle buses take take you from Glen Cove pkg lot to the current summit house & back down.
Title: Re: What did you do to or on your CVO today?
Post by: HOGMIKE on July 26, 2019, 05:48:30 PM
....... but i wouldn't
.... Pikes Peak is a 3 hr RT during tourist season
....... then ya gotta go 2 hrs north & west to get to the approach to Evans
...... that's about when the thunderclouds roll in , and you don't really want to be above tree line in a thunder/lightning event.

ps: Pikes Peak highway is also closed to private vehicles above Glen Cove, to enable construction of the New Summit house.  free Shuttle buses take take you from Glen Cove pkg lot to the current summit house & back down.

Agreed, it’s not easy. I did both after they paved the last section of Pikes. Never had a problem with the weather except for cold winds on top. Traffic seems to be lighter in the week.
Good to know the latest construction projects BEFORE heading that way!
 :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on July 26, 2019, 06:02:51 PM
heads up... august is monsoon season in that area, went there in 2014 on my way home from stirgus and never been in more rain/hail ever
Title: Re: What did you do to or on your CVO today?
Post by: TN on July 26, 2019, 09:11:37 PM
next

Thanks for the heads up, I checked the website and got the info

:trailer:
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on July 26, 2019, 11:26:32 PM
Got my bike back and added a couple of “goodies” while we waited for the painted parts (inner and outer fairing, fender, saddlebag and lid) to come from the factory. Painted headlight bezel, LED’s on the fairing and my “buzzer shot” with the vented oil cap from Fueling. Love the look with the new front lights and bezel. Thrilled to get back on it tomorrow. With 8 lights up front if someone pulls out in front of me they are just trying to hurt me..
Title: Re: What did you do to or on your CVO today?
Post by: OBB on July 27, 2019, 06:26:43 AM
Got my bike back and added a couple of “goodies” while we waited for the painted parts (inner and outer fairing, fender, saddlebag and lid) to come from the factory. Painted headlight bezel, LED’s on the fairing and my “buzzer shot” with the vented oil cap from Fueling. Love the look with the new front lights and bezel. Thrilled to get back on it tomorrow. With 8 lights up front if someone pulls out in front of me they are just trying to hurt me..
Your pix didn't show up. I clicked on it and it was a download that was empty.
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on July 27, 2019, 07:00:21 PM
 gave the rental a three hole service…. then rode it
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on July 27, 2019, 09:59:55 PM
Your pix didn't show up. I clicked on it and it was a download that was empty.
Sorry, let me try this again
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on July 27, 2019, 10:02:07 PM
Sorry, let me try this again
here is a pic without the lights on.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on July 27, 2019, 10:46:24 PM
Sorry, let me try this again
Much better.
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on July 28, 2019, 05:59:18 PM
Well, as others have stated, NOT on my CVO but did ride the newly opened section of the Foothills Parkway and it is very nice. Great views of the smokies and Townsend. Cuts a LOT of time off the route instead of going through Townsend, Wears Valley to Pigeon Forge.  Ate lupper (that's lunch and supper for you uneducated folk) at Huck Finns catfish...oooowweeeee dat b good eatin'.  Came back foothills to avoid the weekend rush home through Sevierville. It was a good day
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on July 29, 2019, 08:21:30 AM
Well, as others have stated, NOT on my CVO but did ride the newly opened section of the Foothills Parkway and it is very nice. Great views of the smokies and Townsend. Cuts a LOT of time off the route instead of going through Townsend, Wears Valley to Pigeon Forge.  Ate lupper (that's lunch and supper for you uneducated folk) at Huck Finns catfish...oooowweeeee dat b good eatin'.  Came back foothills to avoid the weekend rush home through Sevierville. It was a good day

I love the views on the missing link.  Sure cuts a lot of time off the trip to and from Wears Valley.  I just think the speed limit is too low, should be 45 like the rest of the parkway, not 35.
Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on July 29, 2019, 02:56:54 PM
Dealership replaced both lower fairing speakers and for the second time both saddlebag speakers  under warranty. At least the saddlebag speakers lasted around 6 months this time.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on July 30, 2019, 08:11:56 AM
Dealership replaced both lower fairing speakers and for the second time both saddlebag speakers  under warranty. At least the saddlebag speakers lasted around 6 months this time.

That is a lot of speakers in a short time.  So the issue with speakers was not corrected like they said with the update graded speakers in Sept of 18.
Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on July 30, 2019, 08:45:53 AM
That is a lot of speakers in a short time.  So the issue with speakers was not corrected like they said with the update graded speakers in Sept of 18.
The updated saddlebag speakers are better. The previous model speakers only lasted a month if that. I got a good 6 months out of the updated ones. First time I have ever had the lower fairing speakers go bad.
Title: Re: What did you do to or on your CVO today?
Post by: iski on July 30, 2019, 09:40:33 AM
BSR says we needed coffee.  Beans.  Took the long way to get there, weather was nice so took an even longer way, then took a longer way than that to get home. 
Title: Re: What did you do to or on your CVO today?
Post by: TN on August 09, 2019, 09:53:05 AM
Replaced my horn from off the shelf at local auto parts, $8.95

OEM was a bit more, couldn't find a SE Horn. They're missing out.

Title: Re: What did you do to or on your CVO today?
Post by: BigLock on August 09, 2019, 10:55:26 AM
Dropped bike out at dealer yesterday for oil transfer from trans to prime and some more warranty work.
Title: Re: What did you do to or on your CVO today?
Post by: Grizzly on August 09, 2019, 01:34:25 PM
Replaced my horn from off the shelf at local auto parts, $8.95

OEM was a bit more, couldn't find a SE Horn. They're missing out.

Oh sure, and I bet your new horn was made in the good ol' U.S. of A  so you saved all the overseas shipping costs.   ;D
Title: Re: What did you do to or on your CVO today?
Post by: noharley on August 09, 2019, 03:51:52 PM
10K service and added American Elites....
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on August 09, 2019, 06:24:23 PM
Replaced my horn from off the shelf at local auto parts, $8.95

OEM was a bit more, couldn't find a SE Horn. They're missing out.
What store/what part number?? If you going to brag...share (don't let the rest of us continue to be raped... and not kissed). :huepfenlol2: :huepfenlol2:

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: CHH_Badkarma on August 10, 2019, 12:18:09 AM
finally got around to taking the rear fender film off the bike. much better  :bananarock:
Title: Re: What did you do to or on your CVO today?
Post by: Priz on August 10, 2019, 08:49:34 AM
Going to pick up my bike from having it dyno tuned in Gettysburg in a couple hours. I hope the decel poping and white plug tip issues are resolved.
Title: Re: What did you do to or on your CVO today?
Post by: TN on August 10, 2019, 09:12:04 AM
What store/what part number?? If you going to brag...share (don't let the rest of us continue to be raped... and not kissed). :huepfenlol2: :huepfenlol2:

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:

You’ll know it when I brag  :pineapple:

Go to your local Napa, advanced auto, pep boys if you prefer and ask for help in finding what you need.

The bar and shield tattoo on your neck doesn’t mean squat to me.  :orange:

Just Ride
Title: Re: What did you do to or on your CVO today?
Post by: scotman623 on August 10, 2019, 01:43:00 PM
finally got around to taking the rear fender film off t he bike. much better  :bananarock:
Was it on just the rear fender? I just picked up my Mako shark RG up 3 weeks ago, guess I better see if mine has the film on it??
Title: Re: What did you do to or on your CVO today?
Post by: scotman623 on August 10, 2019, 01:48:35 PM
I have had my Mako shark RG for 3 weeks now. My first mod took place 2 days ago, installed 2 1/4 inch Fullsac baffles.. Pretty easy straightforward job to do with some patience removing the welds.. My next thing for my bike is to have my motor built into a stump puller..
Title: Re: What did you do to or on your CVO today?
Post by: kevin_n on August 11, 2019, 05:13:59 PM
Gave it a full detail and got it loaded in the trailer for our up coming trip to the smokey mountains.  :bananarock:
Title: Re: What did you do to or on your CVO today?
Post by: OBB on August 11, 2019, 07:39:17 PM
Rode it from Davenport, IA across IA to Sioux City then north to Sioux Falls, SD. 61-30-??-20-29. Talk about freaking boring. If anyone ever tells you that Iowa is all cornfields, they're lying. I saw 2 hayfields and about 8 bean fields.

Sent from my boring Droid phone.

Title: Re: What did you do to or on your CVO today?
Post by: CHH_Badkarma on August 11, 2019, 08:39:53 PM
Was it on just the rear fender? I just picked up my Mako shark RG up 3 weeks ago, guess I better see if mine has the film on it??

Yup the rear fender. Usually used to protect the rear fender from the passenger pillion pad. At least that was the case on my Breakout
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on August 11, 2019, 09:04:59 PM
The old FXR2 got major love today.  New shocks.  No, wait a minute; that's not right.  New chrome shock bolts.

Top and Bottom :carrot: !   

I know, it seems extravagant to me too but the old girl is worth it.  (Also, the top bolts were just butt ugly.)
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on August 11, 2019, 11:13:29 PM
Rode it from Davenport, IA across IA to Sioux City then north to Sioux Falls, SD. 61-30-??-20-29. Talk about freaking boring. If anyone ever tells you that Iowa is all cornfields, they're lying. I saw 2 hayfields and about 8 bean fields.

Sent from my boring Droid phone.
  easy killer, down from sioux city, by my neck of the woods we have like 2 bluffs  that have no corn or beans.... lol   think that's bad.... I 90 is coming up  :-\
Title: Re: What did you do to or on your CVO today?
Post by: CHH_Badkarma on August 12, 2019, 08:15:31 PM
Spent some time cleaning up the bike after our ride out to breakfast. Two coats of glaze then some americana paste wax. Pup came out to supervise and make sure everything met with his approval.

(https://live.staticflickr.com/65535/48524366632_f808d5275d_c.jpg) (https://flic.kr/p/2gVW4CU)
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on August 12, 2019, 08:46:55 PM
Got an overdue ride in today. Only a couple hundred miles of back road twisties but all is working well and my Corbin and Revo A's got a little more break in time.

Life is good!
Title: Re: What did you do to or on your CVO today?
Post by: Chief2505 on August 15, 2019, 02:53:29 PM
Put in a new battery, checked the tires and oil, started packing for my upcoming trip!
Title: Re: What did you do to or on your CVO today?
Post by: groupw on August 16, 2019, 04:57:16 PM
........ rode it back from SharkWeek in Deadwood
..... left at 7am & followed 385 all the way south to hit I 80/76
.... loved the ride thru Custer State Park & the National Grasslands
... stopped in Alliance NE to check out 'Carhenge'
........... what a great ride
Title: Re: What did you do to or on your CVO today?
Post by: OBB on August 16, 2019, 08:36:59 PM
........ rode it back from SharkWeek in Deadwood
..... left at 7am & followed 385 all the way south to hit I 80/76
.... loved the ride thru Custer State Park & the National Grasslands
... stopped in Alliance NE to check out 'Carhenge'
........... what a great ride
Good seeing you and talking to you for a few minutes the other morning

Sent from my boring Droid phone.

Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on August 16, 2019, 09:03:43 PM
........ rode it back from SharkWeek in Deadwood
..... left at 7am & followed 385 all the way south to hit I 80/76
.... loved the ride thru Custer State Park & the National Grasslands
... stopped in Alliance NE to check out 'Carhenge'
........... what a great ride
  385 is a nice ride, then I usually get on hwy 2 east until Gand Isle before I get on the interstate to head home
Title: Re: What did you do to or on your CVO today?
Post by: martys on August 16, 2019, 10:37:04 PM
Unfortunately I listed it for sale  :( Selling, 2000 Triple Red SERG (https://www.cvoharley.com/smf/index.php?topic=119305.0)


Marty
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on August 16, 2019, 10:43:59 PM
Unfortunately I listed it for sale  :( Selling, 2000 Triple Red SERG (https://www.cvoharley.com/smf/index.php?topic=119305.0)


Marty


Well that sucks.  I'm sorry Marty.  Choice made entirely by your head or did things like knees and hips and other stupid body parts make suggestions too?
Title: Re: What did you do to or on your CVO today?
Post by: martys on August 16, 2019, 11:27:14 PM

Well that sucks.  I'm sorry Marty.  Choice made entirely by your head or did things like knees and hips and other stupid body parts make suggestions too?
Mostly the knees Don  :o I've had a few close calls to setting it down after coming to a stop, and it just dentures me from wanting to go out on it. Sometimes aging sucks!!!!!!


Marty
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on August 16, 2019, 11:45:59 PM
Mostly the knees Don  :o I've had a few close calls to setting it down after coming to a stop, and it just dentures me from wanting to go out on it. Sometimes aging sucks!!!!!!


Marty

Hate to read that Marty.  Know you love the bike.  Sometimes, even against our own desires, we end up choosing not to push it too far. 

So you thinking about a lighter bike once the SERG has gone or a trike?  Or graduating to full time cage?
Title: Re: What did you do to or on your CVO today?
Post by: martys on August 17, 2019, 07:59:52 AM
Hate to read that Marty.  Know you love the bike.  Sometimes, even against our own desires, we end up choosing not to push it too far. 

So you thinking about a lighter bike once the SERG has gone or a trike?  Or graduating to full time cage?
I really do love this gem and that is one of the reasons I'm selling, I can't stand the thought of putting it down and wrecking it  :o .  I haven't given much thought to the future just yet, we will see where it takes me.  We are still hoping to make it to a CVO GTG even if we don't have the bike in the future. 

Marty
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on August 17, 2019, 12:45:12 PM
I really do love this gem and that is one of the reasons I'm selling, I can't stand the thought of putting it down and wrecking it  :o .  I haven't given much thought to the future just yet, we will see where it takes me.  We are still hoping to make it to a CVO GTG even if we don't have the bike in the future. 

Marty



Food for thought....   Despite how much I love the Road Glide and Road King here (and the Road Glide is the bike that still does any significant distance) I've come to thoroughly appreciate the little old FXR for area wide farting around.  It could go on distance rides.  Even though compared to the other two it's not really a "small" bike at just a little over 500 pounds it's still such an easy ride compared to the others.  it's all fun.
Title: Re: What did you do to or on your CVO today?
Post by: michaelokielee@yahoo.com on August 19, 2019, 12:22:10 PM
I really do love this gem and that is one of the reasons I'm selling, I can't stand the thought of putting it down and wrecking it  :o .  I haven't given much thought to the future just yet, we will see where it takes me.  We are still hoping to make it to a CVO GTG even if we don't have the bike in the future. 

Marty

Lots of options out there to convert your baby to a Trike and look a lot better than a Tri Glide!!
Title: Re: What did you do to or on your CVO today?
Post by: noharley on August 19, 2019, 05:55:28 PM
Rolled 800 this weekend on the new American Elites. Very 'grippy' and smooth.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on August 24, 2019, 07:47:31 AM
Crappy rainy weather yesterday so I washed the 19 CVORG between rain showers.  Then I washed the 13 CVORK.  Maybe we will get some weather that is not rain, as I would rather ride.
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on August 24, 2019, 03:45:06 PM
Put a pair of Harley's Get-A-Grip grips on my 18 SERG. Harley's catalog says they don't fit my bike.  :nixweiss:

 So far they are excellent!
Title: Re: What did you do to or on your CVO today?
Post by: Bav on August 24, 2019, 03:48:34 PM
Put a pair of Harley's Get-A-Grip grips on my 18 SERG. Harley's catalog says they don't fit my bike.  :nixweiss:

 So far they are excellent!

Pics?


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on August 25, 2019, 05:08:56 AM
Put 307 miles on the King yesterday, nice ride through Devils Triangle and the hills of east TN. 

Weill put 580 on the Road Glide to day, headed to MI to see Dad.
Title: Re: What did you do to or on your CVO today?
Post by: LuvGun on August 25, 2019, 04:51:51 PM
Installed smoked tail lights
Title: What did you do to or on your CVO today?
Post by: 444turbodiesel on August 25, 2019, 08:26:10 PM
(https://uploads.tapatalk-cdn.com/20190826/9ee646bd3953ae55d436a181a1f23595.jpg)(https://uploads.tapatalk-cdn.com/20190826/d25a9825319e8c6b5c3f2e9f6f4ca3ef.jpg)(https://uploads.tapatalk-cdn.com/20190826/723733641b572b28011b85dc0430c76f.jpg)(https://uploads.tapatalk-cdn.com/20190826/63bfbcd7d16b3e4659433998aefddcde.jpg)

APES!

(Pics loaded bassackwards)


Sent from my iPad using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: bigC on August 25, 2019, 09:33:43 PM
Rode through Hell!
Title: Re: What did you do to or on your CVO today?
Post by: longlast on August 25, 2019, 09:49:57 PM
Added new high beam lights. 

https://photos.app.goo.gl/9D6H2TWWM5ycWExDA
Title: Re: What did you do to or on your CVO today?
Post by: acevtwin on August 27, 2019, 11:38:22 AM
Rode through Hell!
10 minutes from my house!
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on August 28, 2019, 07:47:06 PM
I did my 20K service yesterday after a 400 mile loop around the North Cascades the day before. Also added a Ciro cup holder to my quick release TP for the BSR. Had to customize the bracket since I don't have speaker pods on the TP.
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on August 28, 2019, 07:58:30 PM
Installed smoked tail lights

They look awesome on your bike, can you give us a review?
Title: Re: What did you do to or on your CVO today?
Post by: LuvGun on August 29, 2019, 07:57:37 AM
They look awesome on your bike, can you give us a review?

Sure, exact fit, easy install and work great so far  :thumbup:
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on August 30, 2019, 07:21:26 AM
Rode through Hell!

Michigan roads are sure beat to Hell.  I have been to both Hell, MI and Paradise, MI on the same day.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on August 30, 2019, 07:26:18 AM
Got back from MI yesterday.  A great ride back home, 55 degrees when I left my Dad's house in Battle Creek.  It got up to 60 just after Fort Wayne and hit 70 at the KY boarder.  Hit 80 32 miles from home, Just north of Hariman TN.  Only interstate was Marshal MI to Fort Wayne IN, and then Cincinnati to Lexington.  Most the time I was on US 27, same route I took up four days earlier.

Weather was perfect for riding.  Roads in MI are not so good for riding.  Love the state, born and raised there, but the roads beat you to death. 
Was afraid I was going to bend a rim. 
Title: Re: What did you do to or on your CVO today?
Post by: Phreakyz on August 30, 2019, 08:47:52 AM

Weather was perfect for riding.  Roads in MI are not so good for riding.  Love the state, born and raised there, but the roads beat you to death. 
Was afraid I was going to bend a rim.
Ohio is the same.   Sometimes I pull over and check after hitting a big pothole!   That tiny Front Tire doesn't seem made for Ohio Roads!
Title: Re: What did you do to or on your CVO today?
Post by: michaelokielee@yahoo.com on August 30, 2019, 09:16:22 AM
Ohio is the same.   Sometimes I pull over and check after hitting a big pothole!   That tiny Front Tire doesn't seem made for Ohio Roads!

I think the Front Fat Tire mod must have been created for Michigan and South Carolina, their roads are the worst in the country!!
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on August 30, 2019, 05:18:44 PM
Sitting just outside Louisville and planning the ride home tomorrow. Dave, you talked us into 27 home which runs about 10 miles from the house just past Wartburg. Rode it many times to Oneida but not up into KY. Took 150 to 127 then west to Louisville Thursday. Thanks for the info.

The more we ride the chieftain, the more we love it. Great riding bike and what a sound out the pipes. Stage 2 and getting 46 mpg average. Not too shabby
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on September 01, 2019, 07:55:37 AM
Sitting just outside Louisville and planning the ride home tomorrow. Dave, you talked us into 27 home which runs about 10 miles from the house just past Wartburg. Rode it many times to Oneida but not up into KY. Took 150 to 127 then west to Louisville Thursday. Thanks for the info.

The more we ride the chieftain, the more we love it. Great riding bike and what a sound out the pipes. Stage 2 and getting 46 mpg average. Not too shabby

I often go up 27 when going north.  Keeps me out of Knoxville, some great curves and early Sunday morning almost no traffic.  I will then either head over to the interstate in Burnside or go all the way to Lexington.  Glad you liked it.  I have taken the route your talking to Louisville.
Title: Re: What did you do to or on your CVO today?
Post by: Jock on September 01, 2019, 01:49:29 PM
Took the ride in for a 75k service.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on September 01, 2019, 10:14:46 PM
Took the ride in for a 75k service.
Got the new one picked out yet?
Title: Re: What did you do to or on your CVO today?
Post by: dghboy on September 01, 2019, 10:38:36 PM
Took my Harley CVO Streetglide for the brake fluid recall campaign, just to be told I needed a new ABS module. $800 repair. Told them to flush the fluids and let me have it, than the Service Manager was kind enough to tell me, leave it here let me see what I can do to help. They gave me a courtesy ride home. Next day they did the job for $408. Sometimes
I am just grateful. I know the part is a few hundred dollars. So Thank You Brandon Harley!!!


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on September 01, 2019, 11:02:14 PM
Took my Harley CVO Streetglide for the brake fluid recall campaign, just to be told I needed a new ABS module. $800 repair. Told them to flush the fluids and let me have it, than the Service Manager was kind enough to tell me, leave it here let me see what I can do to help. They gave me a courtesy ride home. Next day they did the job for $408. Sometimes
I am just grateful. I know the part is a few hundred dollars. So Thank You Brandon Harley!!!


Sent from my iPhone using Tapatalk


So you had no codes and nothing to suggest failure (impending or otherwise) before the fluid flush?  Dealership then said they'd like $800 and you said no.  They then did you a favor and took only $400.  And the bike still was throwing no codes nor showing other signs of problem?  Sometimes I'm too much of a skeptic..... 
Title: Re: What did you do to or on your CVO today?
Post by: dghboy on September 01, 2019, 11:05:02 PM
The ABS module is mechanical not electronic. As am sure you know the only difference is that if it works it pumps the brakes, if it does not it just wont pump them.


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on September 01, 2019, 11:08:41 PM
The ABS module is mechanical not electronic. As am sure you know the only difference is that if it works it pumps the brakes, if it does not it just wont pump them.


Sent from my iPhone using Tapatalk

Yeah, familiar with them.  Have changed three.  Have the Daytona Twin Tec tool to allow "home bleeding" and service.  They do tend to give some hint when they're needing replacement....
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on September 01, 2019, 11:10:12 PM
The ABS module is mechanical not electronic. As am sure you know the only difference is that if it works it pumps the brakes, if it does not it just wont pump them.


Sent from my iPhone using Tapatalk

And it's actually both a hydraulic and an electronic component.  Fluid manifold controlled by its fancy smart widgets.
Title: Re: What did you do to or on your CVO today?
Post by: dghboy on September 01, 2019, 11:19:48 PM
You are absolutely correct, if the hydraulic part is the one that fails, it will give no codes. Hence the inability to pump the brakes.


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on September 01, 2019, 11:23:01 PM
You are absolutely correct, if the hydraulic part is the one that fails, it will give no codes. Hence the inability to pump the brakes.


Sent from my iPhone using Tapatalk

So yours was having the hard pedal symptom?
Title: Re: What did you do to or on your CVO today?
Post by: dghboy on September 01, 2019, 11:25:24 PM
Not really hard, but it would not pump or engage the ABS action. Now it does it when I press or step hard on the brakes.


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on September 01, 2019, 11:29:26 PM
Had mostly dismissed it already but my Road King required service today also.  On the side of the road. 

About an hour from home pulled out of a small town just after finishing a nice meal.  Am pretty sure the extra heft of the meal accounted for the problem.  Accelerated away from the one stop light in town and had not throttle.  Grip just oozed or eezed with no throttle reaction.

Sh*t.

Pulled over to the skinny shoulder and eyeballed the throttle body and the grip as best I could.  Pretty sure the grip had just come unglued from its central core (old cable operated throttle). Sure enough, that's all.  Yanked the rubber and chrome part of the ISO grip off and rode home squeezing the skinny inner part that was all still completely in order.

Got home and wiped everything down.  Slathered it a bit with Gorilla Glue and slid the pieces back together.  Zero dollar repairs don't happen often in the Harley world.
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on September 01, 2019, 11:30:48 PM
Not really hard, but it would not pump or engage the ABS action. Now it does it when I press or step hard on the brakes.


Sent from my iPhone using Tapatalk


They'll get "firm" before they will eventually get so hard you can't even engage the brakes anymore.  You were on your way there.  If they replaced with new and got you out for $400 they definitely did you a solid.  The cynic in me should be ashamed :drink: !
Title: Re: What did you do to or on your CVO today?
Post by: dghboy on September 01, 2019, 11:33:16 PM
No problem brother, I still believe there are a few good people in the world. There are far and few but we are still roaming this earth.


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Jock on September 02, 2019, 02:33:08 PM
Got the new one picked out yet?

Well you never know.  I was called earlier today and the dealership is closed until further notice due to the hurricane. So much for leaving early for the Valley.
Title: Re: What did you do to or on your CVO today?
Post by: PBSTN on September 05, 2019, 09:09:44 PM
Listed it for sale. :(
Title: Re: What did you do to or on your CVO today?
Post by: kevin_n on September 07, 2019, 10:14:38 PM
Took a 500 mile round trip and bought $100 of meat from this place.

https://www.nueskes.com/    :pepper:
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on September 09, 2019, 12:07:12 PM
As noted, NOT on my CVO but did put a couple hundred miles on it yesterday.  It was nice in the east TN hills with cooler temps and lower humidity.  Rode up to eat breakfast at the pancake pantry in the heart of downtown Gatlinburg.  They were finishing up a car show in Pigeon Forge on the way home and saw some nice rides...not much traffic there either.  Overall a nice, relaxing day on two wheels.

Saw one of the new CVO triglides coming home through Murville (that's Maryville for the unwashed).  It was the white one.  Not bad (the other color would be better in my opinion) but that's still a LOT of white to keep clean
Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on September 10, 2019, 04:31:00 PM
Sold the Skunk so now onto my next project, 2019 Road Glide Standard with a 126 c/i engine.

Sent from my SM-N975U using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: michaelokielee@yahoo.com on September 11, 2019, 07:34:40 AM
Gave her a new floor to park  :pepper:
Title: Re: What did you do to or on your CVO today?
Post by: michaelokielee@yahoo.com on September 11, 2019, 07:35:07 AM
Gave her a new floor to park  :pepper:
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on September 11, 2019, 08:20:47 AM
Monday rode up to Bardstown KY toured Makers Mark, then the next morning toured Bartons 1792 and rode home.

Today I will be dropping the 19 off for its 15,500 mile service, and more warranty work.
Title: Re: What did you do to or on your CVO today?
Post by: SIKBIRD on September 11, 2019, 11:43:00 AM
Not today but last weekend finally got around to changing rocker box gaskets, rear was leaking but went ahead and replaced to front too while I had it all apart.  Also drilled out the oil return holes and installed Rockout rocker lockers. Took it for a test ride and man what a difference! Engine is nice and quiet now.  Pro-tip: if you have to remove the rocker boxes on an older model the manual states to use a short Allen wrench to remove the rear cylinder left side bolts I found this to be a total PITA plus you can’t torque with an Allen wrench...so I took and old socket to my bench grinder and cut it down to where the bolt head just fit into the socket with the head bottoming out, worked perfectly and was able to use it to torque those bolts to the proper spec.  Also dog bones are virtually required for this project
Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on September 11, 2019, 06:41:09 PM
Had my 25,000 mile service done on my 2019 CVO Street Glide.

Sent from my SM-N975U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on September 11, 2019, 09:11:50 PM
Had my 25,000 mile service done on my 2019 CVO Street Glide.

Sent from my SM-N975U using Tapatalk

Need to change your handle to Mister Miles.
Damn, good for you Joe!
Title: Re: What did you do to or on your CVO today?
Post by: Rooster on September 12, 2019, 09:52:52 AM
Dog Bones? Is the dog helping?
Title: Re: What did you do to or on your CVO today?
Post by: SIKBIRD on September 12, 2019, 04:25:36 PM
Dog Bones? Is the dog helping?

May not be the official name but what I’ve always heard them called
Title: Re: What did you do to or on your CVO today?
Post by: michaelokielee@yahoo.com on September 16, 2019, 08:34:48 AM
May not be the official name but what I’ve always heard them called

That is a Torque Adapter, Ratchet wrenches are commonly called "Dog Bones"
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on September 16, 2019, 10:08:37 PM
Took it mountain climbing
Title: Re: What did you do to or on your CVO today?
Post by: RoadTrip on September 17, 2019, 07:46:45 AM
Today I will be dropping the 19 off for its 15,500 mile service, and more warranty work.

Translation: I’m shopping for a 2020 model.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on September 17, 2019, 08:45:22 PM
Translation: I’m shopping for a 2020 model.
Not a chance for several reasons:
1.  No CVO Road Glide
2.  No CVO Road Glide Ultra
3.  No XM on CVO any more
4.  Continued de-content and cost increase
5.  Big slide in Quality.
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on September 17, 2019, 09:07:46 PM
Translation: I’m shopping for a 2020 model.

Good 4 u. Keep us in the loop!
Title: Re: What did you do to or on your CVO today?
Post by: Grizzly on September 18, 2019, 03:17:59 PM
Not a chance for several reasons:
1.  No CVO Road Glide
2.  No CVO Road Glide Ultra
3.  No XM on CVO any more
4.  Continued de-content and cost increase
5.  Big slide in Quality.

Come on Dave!  At least the "other" Dave always gave us his Ten Top Ten Reasons.   ;D
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on September 20, 2019, 07:39:54 PM
Took a jigsaw to the old FXR  :pepper: :pepper: !!
Title: Re: What did you do to or on your CVO today?
Post by: Jock on September 20, 2019, 09:59:51 PM
Took a jigsaw to the old FXR  :pepper: :pepper: !!

WHAT!

 :o
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on September 20, 2019, 10:50:35 PM
WHAT!

 :o

The windshield :huepfenlol2: .

It didn't have a windscreen when I bought it.  Never had one.  Rode it a couple hundred miles right after got it running right and immediately decided I wasn't 23 anymore and I wanted a windshield.  The detachable kit I scored had a screen that was taller than I am in the saddle.  Riding in the daytime it wasn't that bad.  A few times after dark and once in the rain were as you'd expect though.  Was out again late last night.  When I got home had had enough of the reflections on the screen.  So this afternoon spent an hour carefully measuring and marking and double checking the shape followed by five minutes with a jigsaw and ten minutes with a sander.  Now it's like baby bear's porridge; just right :2vrolijk_21: .
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on September 23, 2019, 12:56:21 AM
No vent switches on any touring bikes. Only one fob on standard bikes. I didn't know that xm was gone. The new bikes look silly without the rear shift lever too. I have no idea what they are thinking.  :confused5:
Title: Re: What did you do to or on your CVO today?
Post by: dghboy on September 23, 2019, 12:20:04 PM
They are thinking bottom line profit margins. Not customer retention nor care.


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on September 23, 2019, 06:04:27 PM
yesterday parked it at home... was on the rode for 9 days, 3613. 6 miles... now i have to clean it, and its a mess. and need to order another set of lifters, it rolled 40k on this trip, 20k on the S&Ss other wise its GTG  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Priz on September 23, 2019, 08:39:33 PM
Hope to finish wrapping 1/2" ceramic blanket around my Vance and Hines baffles tonight. True Duals. Front pipe went pretty well. Rear pipe doesn't have a rear support bracket before the muffler, so getting that muffler off took some time. It finally slipped off after pushing the loosened clamp forward off of the muffler flare. Hope this deepens the tone a bit. The SERK ran pretty well 1800 miles from Maryland down to Tenn, KY and to Maggie Valley 2 weeks before the CVO party. Lots of nice roads down there. Bobarosa Saloon is becoming a regular stop each year as well! Meeting up with the same friends mid October near Roanoke for a 4 day ride.
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on October 02, 2019, 09:41:19 AM
Changed the oil after the MV GTG then yesterday changed the grips to the Kahuna Chrome version like were on some 2019 CVOs. I guess I should not have felt up Gary Linkmeyers grips at MV.....

Waiting on the American Elite front tire to come off backorder to swap out both front and rear. Ive got 13500 miles on the rear and its starting to get a little cupped and squirrely in turns with any type of groove in the pavement.....
Title: What did you do to or on your CVO today?
Post by: KGB on October 02, 2019, 06:55:43 PM
Changed the oil after the MV GTG then yesterday changed the grips to the Kahuna Chrome version like were on some 2019 CVOs. I guess I should not have felt up Gary Linkmeyers grips at MV.....

Waiting on the American Elite front tire to come off backorder to swap out both front and rear. Ive got 13500 miles on the rear and its starting to get a little cupped and squirrely in turns with any type of groove in the pavement.....
I would have let you feel mine up

Grips

Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on October 04, 2019, 10:46:25 AM
Well Keith

I think I did actually feel yours up too. :-\

I also got tired of waiting on the front tire to come in and had the new rear installed yesterday. American Elite, again, since I got 13500 miles out the last one and it was really getting bad. Both sides worn just past the wear bars...

Went with no weights and 3 oz of Dynabeads this time...The ride back to the bunker was SMOOOOTH and I cant wait to get the 21500 mile stock front tire off it.
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on October 04, 2019, 11:39:19 AM
Found this pic from when I was riding the dragon .... any body ever have this when you was riding the dragon ....  :nixweiss: 
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on October 04, 2019, 12:40:14 PM
Found this pic from when I was riding the dragon .... any body ever have this when you was riding the dragon ....  :nixweiss:

Fred, that's the before picture....where's the after one?

That's the numero uno problem with 129...big trucks are NOT restricted (big, long campers either).  That doesn't alleviate the issues with the motorcycle in the wrong lane, however...

And to answer your question, no, thank the good Lord
Title: Re: What did you do to or on your CVO today?
Post by: Priz on October 04, 2019, 12:54:14 PM
 That's the problem with the Dragon. Last trip one guy wanted to do the Dragon but a few of us decided to take the roads to the west side and around. 3 times on the Dragon is enough for me! There are some great twisty roads with less traffic to roll on down that way.
 The Ceramic blanket on my baffles and tightening the rear header pipe made a huge difference with decell pop and the hollow sound I was getting. I think I gained a bit of low end torque as well. 
 We have a nice 4 day trip with friends planned for late next week after we all meet in the Roanoke area. Not much in the way of Fall colors up in here Merry land this year! Gotta love riding this time of year! Brings back memories of riding 2 strokes in the woods as a kid.
Keep um between the ditches!
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on October 04, 2019, 02:38:57 PM
Found this pic from when I was riding the dragon .... any body ever have this when you was riding the dragon ....  :nixweiss:
Oh Chit!!!!  :shocked2:

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on October 04, 2019, 10:46:44 PM
New ciro 3d seat arrived today. The stock seat sucked in my humble opinion  8)
Title: Re: What did you do to or on your CVO today?
Post by: Robmay on October 04, 2019, 11:03:36 PM
Let me know how you like that Stu.


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on October 08, 2019, 09:37:31 AM
Again, NOT on my CVO but I did add a couple of shiny bits along with one useful item to the Chieftain this past weekend.

New shiny, much better looking mirrors
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on October 08, 2019, 09:42:01 AM
...and new floorboard inserts and crash bar closeouts.  I've got the matching passenger floorboard inserts ordered.

The closeouts are an addition I need for the cool/cold riding and they work great.  They are actually stiff with a slight curve built in (I'm guessing fiberglass/plastic insert for the stiffness).  Much nicer (in my opinion) than the fiberglass/plastic lowers on the Roadmaster.  Those still look like something from a mid 80's Kawasaki brochure.  These work as well or better and are much easier to remove/install.

OK, enough about this other brand, back to the regular, scheduled CVO discussions... ;D
Title: Re: What did you do to or on your CVO today?
Post by: TN on October 08, 2019, 05:29:53 PM
My FLTRSE3 was water cooled today.  :orange:
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on October 09, 2019, 06:47:36 AM
My wife and I went for a ride, did 154 miles though the hills of east TN, loving the cooler weather.  Me on my 19 CVO RG and her on her RGS.
Title: Re: What did you do to or on your CVO today?
Post by: bigC on October 09, 2019, 02:24:18 PM
Sad day today. Signed the title over to the insurance company this morning. After my Maggie Valley accident last month, the bike was totaled. I know there is a lot of talk about sumping of the M8 bikes, but I had one of the good motors. I had put just under 45,000 miles in the 2 1/2 years I had owned it and no motor issues at all!

Clay
Title: Re: What did you do to or on your CVO today?
Post by: naitram on October 09, 2019, 03:35:09 PM
Sad day today. Signed the title over to the insurance company this morning. After my Maggie Valley accident last month, the bike was totaled. I know there is a lot of talk about sumping of the M8 bikes, but I had one of the good motors. I had put just under 45,000 miles in the 2 1/2 years I had owned it and no motor issues at all!

Clay

was wondering what happened after you got home. got your eye on something to replace it with?
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on October 10, 2019, 06:55:05 AM
Sad day today. Signed the title over to the insurance company this morning. After my Maggie Valley accident last month, the bike was totaled. I know there is a lot of talk about sumping of the M8 bikes, but I had one of the good motors. I had put just under 45,000 miles in the 2 1/2 years I had owned it and no motor issues at all!

Clay

What you planning to replace it with? 
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on October 10, 2019, 06:57:42 AM
Rode my yesterday to DR appointment.  Then over to boat dealer to set up the return of the wrong axle they sent and get the right one sent.  Then over to SMHD to sit and have a cigar and beer with a friend.  All said 174 miles yesterday.

Riding to Hot Springs NC for lunch today with some friends.
Title: Re: What did you do to or on your CVO today?
Post by: bigC on October 10, 2019, 04:08:52 PM
was wondering what happened after you got home. got your eye on something to replace it with?

Not 100% sure yet. Had hand surgery last week. So it will probably be about 3 months before I'm released to ride. Also back is still an issue, couldn't ride if I wanted to. So I have some time to look at my options. Maybe find a good used garage queen, if not probably new 2020 CVO Limited.
Title: Re: What did you do to or on your CVO today?
Post by: Bobs14Limited on October 10, 2019, 07:56:34 PM
Maybe find a good used garage queen, if not probably new 2020 CVO Limited.


The 2020 CVO Limiteds are pretty sweet. Though I am biased.  :)
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on October 16, 2019, 09:59:36 AM
We enjoyed utilizing the Eisenhower Interstate System this past weekend in a quick jaunt over to the western side of the state.  We had not been to downtown Memphis in a few years so it was nice seeing a semi-revitalized downtown area from our last visit there.  Beale Street was EMPTY Sunday afternoon as you can see from the picture but it's fun seeing all the history there and watching the ducks march at The Peabody.  If you haven't seen that, take a leisurely afternoon tea and enjoy their walk.

There and back in two days...it's nice to know that after the health issues, I can still enjoy the saddle time after 980 miles.  Gotta get to work on the next big trip... ;D

I ain't ready for a trailer just yet... :2vrolijk_21:

 
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on October 16, 2019, 10:00:18 AM
Hello from Memphis
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on October 16, 2019, 10:01:41 AM
Da Ducks be in da house (or fountain as the case may be)
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on October 18, 2019, 02:14:56 PM
I ordered yet another windshield from John at Freedom Shields! After adding the 13" Legend Revo A's and my new Corbin Solo seat, I found that the current windshield that is on my bike from John is a little short, So I ordered #7 from him. IMHO he has the best quality, wind management, and customer service of anyone in the business. John also gives a discount to anyone who mentions this site. I ordered a 14" Sport Touring in Light Gray tint. It should be here in a week or so.

https://freedomshields.net/
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on October 18, 2019, 02:22:31 PM
IMHO he has the best quality, wind management, and customer service of anyone in the business. John also gives a discount to anyone who mentions this site. I ordered a 14" Sport Touring in Light Gray tint. It should be here in a week or so.

https://freedomshields.net/

Ray, I agree 100% with your statement but you forgot clarity and absolutely NO distortion... :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on October 18, 2019, 03:42:25 PM
You are absolutely right Howard!

Kelly
Title: Re: What did you do to or on your CVO today?
Post by: MC16LTD on October 21, 2019, 03:49:18 PM
Just finished a week of riding the Blue Ridge Parkway near Maggie Valley and around the Smokey Mountains so the wife can see leaves change colors about 1k miles total.  Color change is slow this year about two weeks behind, so am being "forced" to return in a couple weeks.

Agree on the Freedom Shields, just put a new one on before the trip and worked great and very clear.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on October 22, 2019, 08:41:21 AM
Bike has been busy for the past two weeks. 

On the Saturday the 12th a woman on a cell in her cage came over on me and hit me.  Mess up fairing and engine guard on the left side, and then bike went down on right side.  I did not get hurt at all, so I'm thankful.

Then rode said bike down for Biketorberfest, nice 1378 mile trip. 

Yesterday dropped the bike off so they could clean it, then today they will be doing the estimates on the bike.  Adjuster will go see it Wednesday to make sure he agrees with the dealer on the damage.
Title: Re: What did you do to or on your CVO today?
Post by: acevtwin on October 22, 2019, 09:18:46 AM
Bike has been busy for the past two weeks. 

On the Saturday the 12th a woman on a cell in her cage came over on me and hit me.  Mess up fairing and engine guard on the left side, and then bike went down on right side.  I did not get hurt at all, so I'm thankful.

Then rode said bike down for Biketorberfest, nice 1378 mile trip. 

Yesterday dropped the bike off so they could clean it, then today they will be doing the estimates on the bike.  Adjuster will go see it Wednesday to make sure he agrees with the dealer on the damage.
First of all I hope I Never get knocked down by a woman on her phone in a cage. But if I ever do,... I hope Im as calm about it as you are!
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on October 22, 2019, 10:55:23 AM
Ditto, start a new thread with pics Dave and share your progress.
Title: Re: What did you do to or on your CVO today?
Post by: Robmay on October 22, 2019, 11:34:52 AM
Glad you’re okay Dave.


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on October 22, 2019, 06:00:09 PM
Bike has been busy for the past two weeks. 

On the Saturday the 12th a woman on a cell in her cage came over on me and hit me.  Mess up fairing and engine guard on the left side, and then bike went down on right side.  I did not get hurt at all, so I'm thankful.

Then rode said bike down for Biketorberfest, nice 1378 mile trip. 

Yesterday dropped the bike off so they could clean it, then today they will be doing the estimates on the bike.  Adjuster will go see it Wednesday to make sure he agrees with the dealer on the damage.
glad your ok... but just the other day I said us old farts have to stop getting run over   :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on October 23, 2019, 06:46:56 AM
Hey Dave. Just glad to hear that you are OK.  The most important thing.   Stuart.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on October 23, 2019, 07:48:42 AM
First of all I hope I Never get knocked down by a woman on her phone in a cage. But if I ever do,... I hope Im as calm about it as you are!

Was not at all calm at the time.  She split the minute she hit me.  Did not get a tag.

That said, after thinking about it, I did calm way down.  I have so much to be thankful for.  I did not get hurt, the result could have been so much worse.  The bike can be replaced or fixed, people can not.

Glad you’re okay Dave.


Thank you.

Ditto, start a new thread with pics Dave and share your progress.

Thanks, looks like around 10K to fix bike, should have final numbers later today. 

glad your ok... but just the other day I said us old farts have to stop getting run over   :nixweiss:

Thank you.  Hand free law does not seem to help in TN or GA from what I have seen.

Hey Dave. Just glad to hear that you are OK.  The most important thing.   Stuart.
You are correct being ok is the most important.  Thank you.
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on October 23, 2019, 12:39:33 PM
Bike has been busy for the past two weeks. 

On the Saturday the 12th a woman on a cell in her cage came over on me and hit me.  Mess up fairing and engine guard on the left side, and then bike went down on right side.  I did not get hurt at all, so I'm thankful.

Then rode said bike down for Biketorberfest, nice 1378 mile trip. 

Yesterday dropped the bike off so they could clean it, then today they will be doing the estimates on the bike.  Adjuster will go see it Wednesday to make sure he agrees with the dealer on the damage.

That sucks.  Sorry Dave.  No matter how proactive we try to be and how much we watch other people's front wheels, heads, and anything else that might help there is some levels of stupid and/or simple error we just can't protect ourselves from.  After the fact you and the bike rode away from the incident and that is always worth declaring as a victory.  Hope the 'fest was fun and the bike fixes up well for you  :2vrolijk_21: .
Title: Re: What did you do to or on your CVO today?
Post by: Phreakyz on October 24, 2019, 06:40:02 AM
Bike has been busy for the past two weeks. 

On the Saturday the 12th a woman on a cell in her cage came over on me and hit me.  Mess up fairing and engine guard on the left side, and then bike went down on right side.  I did not get hurt at all, so I'm thankful.

Then rode said bike down for Biketorberfest, nice 1378 mile trip. 

Yesterday dropped the bike off so they could clean it, then today they will be doing the estimates on the bike.  Adjuster will go see it Wednesday to make sure he agrees with the dealer on the damage.

Sorry to hear it and glad you are OK!  Bikes can be fixed or replaced,  people can't!
Title: Re: What did you do to or on your CVO today?
Post by: OBB on October 24, 2019, 07:51:24 PM
Dropped it off for the ESP Warranty repair of the heated grips about 6:45 AM (then took a 3 1/2 trip each way with a buddy for him to pick up another used bike for his garage) and picked it up about 3:45pm. The new ones actually have the little nubs on them just like the replaced ones used to 40k miles ago :P
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on October 24, 2019, 08:41:00 PM
Dropped it off for the ESP Warranty repair of the heated grips about 6:45 AM (then took a 3 1/2 trip each way with a buddy for him to pick up another used bike for his garage) and picked it up about 3:45pm. The new ones actually have the little nubs on them just like the replaced ones used to 40k miles ago :P
that stinks if those grips stop heating at 40k.... I know thy wear smooth. also, you got a good pic of them bars you put on, making my winter up grade list and might change mine
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on October 24, 2019, 08:42:32 PM
That sucks.  Sorry Dave.  No matter how proactive we try to be and how much we watch other people's front wheels, heads, and anything else that might help there is some levels of stupid and/or simple error we just can't protect ourselves from.  After the fact you and the bike rode away from the incident and that is always worth declaring as a victory.  Hope the 'fest was fun and the bike fixes up well for you  :2vrolijk_21: .
True on riding bike away.

Biketorberfest was very good.  Especially Billy Lane's Sons of Speed.  A good friend was racing his 1921 board tracker in the 61 antique class.  The hot 61 class was really something to watch.  The 45 class was fun also.  Brittny Olsen is a heck of a racer, and this was her last race.  Several other females racing like Jody Periwits, and Rossmyers daughter. 

My bike was dropped of for repairs when I got back, 8700 dollars worth of damage. 

Title: Re: What did you do to or on your CVO today?
Post by: OBB on October 24, 2019, 09:25:18 PM
that stinks if those grips stop heating at 40k.... I know thy wear smooth. also, you got a good pic of them bars you put on, making my winter up grade list and might change mine
What all angles do you want? I think I put one or two in this thread a while back. One thing about these fat bars, it's a real pain in the arse to push them real far forward because you need space to get the little screws into the sides of the cluster housing.
Title: Re: What did you do to or on your CVO today?
Post by: Phreakyz on November 06, 2019, 05:37:49 AM
The wife and I participated in the Annual Toys For Tots ride in Heath, Ohio on Sunday.   Weather was cold in the morning (30's) but got into the High 40's later!!!   Had a great time.    Had nearly 700 bikes at last count.  Out of all the bikes there, I did not see another '19 CVO Road Glide at all...    Makes me wonder about final production numbers.
Title: Re: What did you do to or on your CVO today?
Post by: TN on November 10, 2019, 08:15:32 AM
Rode to Vinnies for the best pizza on the east coast.  :orange:

Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on November 10, 2019, 09:04:53 PM
Rode the FXR to a little diner that's worth the trouble about 50 miles from home.  Took 90 miles to get there.  140 more to get home.  Common Core.  Temps in the 60s this afternoon.  24 hours from then 40+ degrees cooler is the forecast with a "wintry mix."  Rode yesterday and today though.
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on November 11, 2019, 05:50:32 PM
What all angles do you want? I think I put one or two in this thread a while back. One thing about these fat bars, it's a real pain in the arse to push them real far forward because you need space to get the little screws into the sides of the cluster housing.
found them  :2vrolijk_21: if you have others I wouldn't mind seeing those thnx
Title: Re: What did you do to or on your CVO today?
Post by: OBB on November 11, 2019, 08:07:20 PM
found them  :2vrolijk_21: if you have others I wouldn't mind seeing those thnx
I'll see what I can get. Might have to settle for pix in the dungeon (my garage) as it's supposed to start snowing tomorrow

Sent from my boring Droid phone.

Title: Re: What did you do to or on your CVO today?
Post by: TN on November 12, 2019, 11:46:15 AM
World class road race track.  :orange:
Title: Re: What did you do to or on your CVO today?
Post by: Jock on November 12, 2019, 06:38:10 PM
World class road race track.  :orange:

Did you do a couple of laps?  Last time I was there I almost hit a deer!   :o
Title: Re: What did you do to or on your CVO today?
Post by: TN on November 13, 2019, 06:44:08 AM
Did you do a couple of laps?  Last time I was there I almost hit a deer!   :o

No, they had it blocked off. It was wide open for awhile before the Westin was built, even after they came in you could do a lap or two without much worry. Ever since they had a fatality where someone was crossing the road in a golf cart and the guy busting down the back straight plowed through him it hasn’t been very inviting. They do open it up a few times a year for some nice events and I predict one day it will host another race.
Title: Re: What did you do to or on your CVO today?
Post by: TN on November 17, 2019, 12:17:01 PM
Rode her.  :orange:
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on November 18, 2019, 07:54:38 AM
Saturday I rode down to Athens GA for the night, 129 was a great ride down.  Came back on 60 out of Gainsville, a very good road, nice and twisty. 
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on November 18, 2019, 02:56:13 PM
Not on my CVO but we did enjoy a cool outing with 84,000 or so of our closest friends this past Saturday evening...
Title: Re: What did you do to or on your CVO today?
Post by: Grizzly on November 18, 2019, 03:27:32 PM
Oh yeah, I see you waving now.   ;D

Sure bet you had a super time.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on November 19, 2019, 07:32:00 AM
Bet that Garth concert was good. 

Going to ride with some friends to day to Muddy Pond, for lunch at the Amish deli.  Some nice twisty TN back roads.
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on November 19, 2019, 08:41:55 AM
Bet that Garth concert was good. 

Going to ride with some friends to day to Muddy Pond, for lunch at the Amish deli.  Some nice twisty TN back roads.

I've not been there but work with folks that have and say wonderful food...

Garth puts on one heck of a show...I can see why he's a 7 time EoTY winner
Title: Re: What did you do to or on your CVO today?
Post by: longlast on November 19, 2019, 05:35:40 PM
Would've loved to have been there  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on November 23, 2019, 05:44:54 PM
New front rotors and a front tire pressure sensor all replaced under warranty on the Mako.. Always somethin😩
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on November 23, 2019, 08:32:07 PM
My dealer's service manager called me the other day and asked if she could send someone out to pick up my bike free of charge and run it through a multi point check before the warranty ran out (obviously they are a little slow this time of year) . I mentioned that there is a tiny bit of moisture in the speedo as I was racking my brain thinking of what could be done while still under warranty and they concurred and said that they couldn't find anything else that needed attention. Outstanding!
So they ordered a new speedo, brought my bike back to me yesterday, at no cost, and will contact me when it arrives.

Pretty damn good customer service from Barbi at North Cascades Harley.
Title: Re: What did you do to or on your CVO today?
Post by: Indenial on November 23, 2019, 08:42:48 PM
It warmed up to 40 degrees, so I went for a ride. May be the last one of the year.  And it felt real good.
Title: Re: What did you do to or on your CVO today?
Post by: dayne66 on November 23, 2019, 08:46:14 PM
My dealer's service manager called me the other day and asked if she could send someone out to pick up my bike free of charge and run it through a multi point check before the warranty ran out (obviously they are a little slow this time of year) . I mentioned that there is a tiny bit of moisture in the speedo as I was racking my brain thinking of what could be done while still under warranty and they concurred and said that they couldn't find anything else that needed attention. Outstanding!
So they ordered a new speedo, brought my bike back to me yesterday, at no cost, and will contact me when it arrives.

Pretty damn good customer service from Barbi at North Cascades Harley.
Damn.....I'm really really jealous!!!!
Title: Re: What did you do to or on your CVO today?
Post by: OBB on November 24, 2019, 06:15:44 AM
My dealer's service manager called me the other day and asked if she could send someone out to pick up my bike free of charge and run it through a multi point check before the warranty ran out (obviously they are a little slow this time of year) . I mentioned that there is a tiny bit of moisture in the speedo as I was racking my brain thinking of what could be done while still under warranty and they concurred and said that they couldn't find anything else that needed attention. Outstanding!
So they ordered a new speedo, brought my bike back to me yesterday, at no cost, and will contact me when it arrives.

Pretty damn good customer service from Barbi at North Cascades Harley.
Hard to beat that service. :2vrolijk_21: :2vrolijk_21: :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Grizzly on November 24, 2019, 11:40:00 PM
My dealer's service manager called me the other day and asked if she could send someone out to pick up my bike free of charge and run it through a multi point check before the warranty ran out (obviously they are a little slow this time of year) . I mentioned that there is a tiny bit of moisture in the speedo as I was racking my brain thinking of what could be done while still under warranty and they concurred and said that they couldn't find anything else that needed attention. Outstanding!
So they ordered a new speedo, brought my bike back to me yesterday, at no cost, and will contact me when it arrives.

Pretty damn good customer service from Barbi at North Cascades Harley.


My dealer Barrie Harley-Davidson treats me exactly the same way.

It sure is comforting when you have a fabulous dealer looking out for you.   :2vrolijk_21:

I can't say enough about my dealer - They're wonderful!
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on November 24, 2019, 11:47:26 PM

My dealer Barrie Harley-Davidson treats me exactly the same way.

It sure is comforting when you have a fabulous dealer looking out for you.   :2vrolijk_21:

I can't say enough about my dealer - They're wonderful!
Biggs HD outside of San Diego has always picked up and delivered my bikes for me for service and I live 60 miles away form them. Fantastic dealer that I very much appreciate!
Title: Re: What did you do to or on your CVO today?
Post by: Grizzly on November 25, 2019, 10:05:09 AM
I'm referring more to the fact of how comforting it is to know that your dealer has your back... With every bike we've owned, prior to the warranty running out our dealer has notified us that it is coming to an end and they would like to check over the entire bike to ensure everything is good before the warranty runs out, and repair what is necessary.

That's great service!   :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on November 25, 2019, 10:23:07 AM
While we have wonderful dealers here in the k'ville and Maryville area, I've never had any of them call, email or otherwise contact me for a final check before the warranty ran out much less come and get it for service and that's going back to 1989. Y'all have some very good dealers... :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: acevtwin on November 25, 2019, 10:37:00 AM
Iv'e had my Searay Boat dealer do that, But never a Harley dealer. (not even when I worked there)
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on November 26, 2019, 07:59:44 AM
While we have wonderful dealers here in the k'ville and Maryville area, I've never had any of them call, email or otherwise contact me for a final check before the warranty ran out much less come and get it for service and that's going back to 1989. Y'all have some very good dealers... :2vrolijk_21:
I fully agree.  Maryville has been great to my wife and I.  They have gone to bat for me with the MoCo more than once on issue the with the bike, like getting black fork legs replaced or a seat replaced for wear. 

Yet they have never offered to come get a bike or drop it off.  That said I am extremely happy with our dealers on the way they treat us.
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on November 26, 2019, 01:46:23 PM
Oh and by the way they are over 30 miles away from me, so by the time they replace my speedo head they'll have racked up well over 120 miles!

Pretty cool.  :bananarock:
Title: Re: What did you do to or on your CVO today?
Post by: iski on November 26, 2019, 02:53:25 PM
Turned a 20 minute trip to the parts store into a 2 hour country road ride. Blue sky, 70 degrees, no wind.
Title: Re: What did you do to or on your CVO today?
Post by: longlast on November 26, 2019, 05:44:06 PM
Turned a 20 minute trip to the parts store into a 2 hour country road ride. Blue sky, 70 degrees, no wind.

Happy for you  :) :2vrolijk_21: but at the same time sad😩 had a rainy cold windy day🌧👎
Title: Re: What did you do to or on your CVO today?
Post by: HighOnHD on November 26, 2019, 07:14:10 PM
Oh and by the way they are over 30 miles away from me, so by the time they replace my speedo head they'll have racked up well over 120 miles!

Pretty cool.  :bananarock:

I believe if you treat people well they will likely treat you well... Harley Dealers included.

My Dealer (Paradise Harley) is 40 miles away from me and has picked up and delivered my bike the last 4 or 5 times for warranty service. They have been awesome!
 ;D
Title: Re: What did you do to or on your CVO today?
Post by: iski on November 27, 2019, 06:47:23 AM
Happy for you  :) :2vrolijk_21: but at the same time sad😩 had a rainy cold windy day🌧👎

Here's hoping for a dry (know that's not likely but it is possible  8)) blue sky nice ride day for you soon.

80 today (27 C), blue sky, Spousal Unit & I are riding down to the coast for oysters & icy cold beverages.  We will take the long way, both ways....
Title: Re: What did you do to or on your CVO today?
Post by: Robmay on November 27, 2019, 07:18:09 AM
We were just at Up The Creek in Apalachicola yesterday Mike. Some of the best oysters I’ve ever had! Local IPA was great as well.


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: iski on November 27, 2019, 07:34:31 AM
We were just at Up The Creek in Apalachicola yesterday Mike. Some of the best oysters I’ve ever had! Local IPA was great as well.


Sent from my iPhone using Tapatalk

Good place Rob!  We were at Blue Parrot on St. George Island a couple of weeks ago on a gorgeous day. The Owl Cafe in Apalachicola has a great upstairs too - not a raw bar but the food is outstanding.  Am judging a BBQ contest in Appalach in January.  Staying at the Gibson. We enjoy their big porch, a cold beer, a good cigar, and those rocking chairs to watch the world roll on by.

Today will be either Riverside in St. Marks or Seinyard in Panacea.
Title: Re: What did you do to or on your CVO today?
Post by: dan.stegner on November 27, 2019, 11:56:18 AM
Just bought an 09 cvo springer softtail.  Clutch was gone... removed all dot 4 fluid from reservoir,  cleaned well with alchohol filled , bleed and clutch is solid once again. Bike sat since 2011. So I'm thinking , change all fluids just to be safe.  (https://uploads.tapatalk-cdn.com/20191127/f194dbb84ee722508c1fd09372c53190.jpg)

Sent from my SM-N960U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: OBB on November 27, 2019, 03:50:37 PM
Just bought an 09 cvo springer softtail.  Clutch was gone... removed all dot 4 fluid from reservoir,  cleaned well with alchohol filled , bleed and clutch is solid once again. Bike sat since 2011. So I'm thinking , change all fluids just to be safe.


 (https://uploads.tapatalk-cdn.com/20191127/f194dbb84ee722508c1fd09372c53190.jpg)

Sent from my SM-N960U using Tapatalk


That's a great start. Check those tires real good too for dry rot and cracking.
Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on November 27, 2019, 04:11:42 PM
Sold the Skunk so now onto my next project, 2019 Road Glide Standard with a 126 c/i engine.

Sent from my SM-N975U using Tapatalk
Dropped the project bike off at J&B Performance Cycles to get tuned.

Sent from my SM-N975U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: dan.stegner on November 27, 2019, 06:09:18 PM
Congrats. Good luck on the new mods

Sent from my SM-N960U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: dan.stegner on November 27, 2019, 06:11:02 PM
That's a great start. Check those tires real good too for dry rot and cracking.
Yes indeed. Can't wait till it's all squared away.

Sent from my SM-N960U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: dan.stegner on November 27, 2019, 06:11:53 PM
I'll be adding the Kbar sissy bar  as soon as it arrives (https://uploads.tapatalk-cdn.com/20191127/ff4fcb3c8eb43126757268e747cd5dd0.jpg)

Sent from my SM-N960U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on November 28, 2019, 08:29:22 AM
Dropped the project bike off at J&B Performance Cycles to get tuned.

Sent from my SM-N975U using Tapatalk
Nice, I am sure it will turn out well.
Title: Re: What did you do to or on your CVO today?
Post by: michaelokielee@yahoo.com on December 03, 2019, 03:45:07 PM
Finished making my harness for automatic Tour Pak lock, every thing works,so happy :pepper:
Title: Re: What did you do to or on your CVO today?
Post by: Phreakyz on December 03, 2019, 04:12:27 PM
Finished making my harness for automatic Tour Pak lock, every thing works,so happy :pepper:

I have a Tour Pack, Lock Actuator and Cylinder on order right now!    I ordered mine on Black Friday because they were offering a deal.     Went with the Chopped. 
Any Tips Pointers or Pics would be greatly appreciated!   
Title: Re: What did you do to or on your CVO today?
Post by: michaelokielee@yahoo.com on December 03, 2019, 04:41:53 PM
I have a Tour Pack, Lock Actuator and Cylinder on order right now!    I ordered mine on Black Friday because they were offering a deal.     Went with the Chopped. 
Any Tips Pointers or Pics would be greatly appreciated!
PM me your number and I will give you a call and help as much as possible
Title: Re: What did you do to or on your CVO today?
Post by: longlast on December 14, 2019, 10:51:56 PM
It was a nice 7• sunny day today so I unplugged the new Daltran H-D charger rolled the bike out and fired her up  threw my leg over and went on a 3hr ride.
Stopped at a roadside layby greasy spoon wagon for a worm up cuppa and bacon roll. Then back on the road with Merle Haggard and Waylon Jennings tunes along with some others.

Got to say (don't know if it's just me) since I changed the lifters over installed the SE quick install tapered pushrods change over the V&H oval slip-on's (that were showing their age been on since 2008) back to the stock slip-on's, removed the V&H fuelpak and plugged back into the ECM the motor is running great it sounds and feels more responsive on the throttle than before, in high gear it has more kick when the throttle is cracked.
All in all a satisfying winter ish days ride out.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on December 16, 2019, 08:05:10 AM
Yesterday was a pretty nice day, mid 40's to 53 degrees.  So my wife and I went for a nice 180 mile ride though the Smokies and along the Ocoee and Hiawassee rivers.  Lots of nice covers and good scenery for us to enjoy.  She was on Her 2019 Road Glide Special and me on my 13 CVO King.
Title: Re: What did you do to or on your CVO today?
Post by: iski on December 16, 2019, 01:59:00 PM
Wondered if the bike needed gas.  A 75 degree day.  It didn't.  Rode until it did.
Title: Re: What did you do to or on your CVO today?
Post by: 110Mofo on December 16, 2019, 02:43:09 PM
A new friend of mine gave me a matching painted vent. He just so happens to have the same color bike.
Thank you very much.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on December 17, 2019, 08:12:15 AM
Checked on my 19 CVO road glide that I was hit while on.  Parts have all come in and they will start working on her Today. 
Title: Re: What did you do to or on your CVO today?
Post by: longlast on December 17, 2019, 10:01:27 AM
Removed the wind deflector fasteners that turn brown and rusty I've cleaned them a number of times.
This time cleaned the rust off gave them a coat of clear lacquer then a coat of Enamel Spray Chrome.
Turned out not bad..
Title: Re: What did you do to or on your CVO today?
Post by: stuart1270 on December 20, 2019, 01:27:45 PM
2 weeks ago I installed the 117ci big bore kit from Harley.  Also did the S&S tc3 oil pump and cam plate. Already had the S&S lifters . Has been a little cold here in NY so hadn't had a chance to put too many miles on it but so far I'm liking it.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on December 21, 2019, 08:41:41 AM
Sent a set of CVO M8 air cooled heads to WA to be ported and set up for a higher lift cam. 
Title: Re: What did you do to or on your CVO today?
Post by: X-Man on December 24, 2019, 11:47:40 PM
Installed Kahuna heated grips. Tried them out today in 38 degree temps on a 50 mile ride, they worked great.
Title: Re: What did you do to or on your CVO today?
Post by: longlast on December 25, 2019, 11:46:44 PM
Installed Kahuna heated grips. Tried them out today in 38 degree temps on a 50 mile ride, they worked great.

What's the part number on those grips? Does all you need come in the kit? They look good

Cheers
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on December 26, 2019, 12:28:21 AM
Do a Google search for Kahuna heated grips.  Around $280 for the kit.
Title: Re: What did you do to or on your CVO today?
Post by: Robmay on December 26, 2019, 07:45:28 AM
Do a Google search for Kahuna heated grips.  Around $280 for the kit.

These are the all black.
(https://uploads.tapatalk-cdn.com/20191226/866982d33bf052af8fbd4ff7dbef8839.jpg)


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on December 26, 2019, 08:07:54 AM
These are the all black.
(https://uploads.tapatalk-cdn.com/20191226/866982d33bf052af8fbd4ff7dbef8839.jpg)


Sent from my iPhone using Tapatalk

Thats funny, does not fit CVO Models except FXSE.  They work just fantastic on my 2019 FTRXSE.  I had them installed prior to delivery.

(http://www.cvoharley.com/smf/gallery/6353_29_12_18_7_42_12.jpeg)

Like so many things you cant believe the Motor Company, as they do not know. 
Title: Re: What did you do to or on your CVO today?
Post by: Robmay on December 26, 2019, 09:55:16 AM
Those look great Dave. I think I may add some to my Mako when I decide on which bars I want.


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: bungie on December 26, 2019, 12:17:02 PM
Thats funny, does not fit CVO Models except FXSE.  They work just fantastic on my 2019 FTRXSE.  I had them installed prior to delivery.

(http://www.cvoharley.com/smf/gallery/6353_29_12_18_7_42_12.jpeg)

Like so many things you cant believe the Motor Company, as they do not know.

Not standard bars on that bike but i know nothing.
Title: Re: What did you do to or on your CVO today?
Post by: longlast on December 26, 2019, 06:29:31 PM
Thats funny, does not fit CVO Models except FXSE.  They work just fantastic on my 2019 FTRXSE.  I had them installed prior to delivery.

(http://www.cvoharley.com/smf/gallery/6353_29_12_18_7_42_12.jpeg)

Like so many things you cant believe the Motor Company, as they do not know.

I found the same thing,.."seeing the, Do not fit CVO" steered me off.  Obviously they do fit CVO don't understand why they would put they don't  :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: OBB on December 26, 2019, 10:05:01 PM
I found the same thing,.."seeing the, Do not fit CVO" steered me off.  Obviously they do fit CVO don't understand why they would put they don't  :nixweiss:
Those are also not stock HD bars in that pix. I thought those grips came on the CVO Limited within the last few years and those are the same bars as the SESG. Dunno.

Sent from my boring Droid phone.

Title: Re: What did you do to or on your CVO today?
Post by: longlast on December 26, 2019, 11:03:55 PM
Those are also not stock HD bars in that pix. I thought those grips came on the CVO Limited within the last few years and those are the same bars as the SESG. Dunno.

Sent from my boring Droid phone.

Puts that to bed  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on December 27, 2019, 08:16:17 AM
Those look great Dave. I think I may add some to my Mako when I decide on which bars I want.


Sent from my iPhone using Tapatalk

I'm glad they are close enough match to what comes on the bike its not obvious unless your a CVO owner they are not stock grips.  I have found them to be pretty comfortable and they heat well. 
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on December 27, 2019, 08:23:20 AM
Not standard bars on that bike but i know nothing.

Nope, I run 14" Yaffe on every bike since 2012.  Very comfortable for me, even on 1000 mile days.  The grips will work just fine on stock bars.

Those are also not stock HD bars in that pix. I thought those grips came on the CVO Limited within the last few years and those are the same bars as the SESG. Dunno.

Sent from my boring Droid phone.



Yes these are stock grips for 19 CVO Street Glide and 19 CVO Limited, same with the 2020 bikes.

In 13, I put the heated grips from the CVO limited on my CVO King.  In 17 I put the heated grips from the CVO Limited on my CVO Street glide.  They always say they do not fit, they always work.

in 18 they said lowers would not work with the CVO road Glide because of the 21 front wheel, they fit just fine. 

(http://www.cvoharley.com/smf/gallery/6353_24_12_18_8_03_40.jpeg)

I believe you have to figure it out for your self, as they are wrong lots.
Title: Re: What did you do to or on your CVO today?
Post by: Phreakyz on December 27, 2019, 05:14:12 PM
Rode it! :pepper:
Title: Re: What did you do to or on your CVO today?
Post by: X-Man on December 27, 2019, 11:39:40 PM
The heated grips do fit and are plug and play. The bike is prewired for them and the connectors are under the instrument bezel.
HD customer support also said that the tour pack spoiler lights do not fit a CVO Road Glide either but after looking at the wiring diagrams, I decided that they would. Strange that HD sells the spoiler in the unique silver color.



Installed Kahuna heated grips. Tried them out today in 38 degree temps on a 50 mile ride, they worked great.
Title: Re: What did you do to or on your CVO today?
Post by: Aussie on December 31, 2019, 12:04:49 AM
Replaced the stock lights with LED’s. Huge difference.
Left passing lamp is halogen and right is LED.
Title: Re: What did you do to or on your CVO today?
Post by: Aussie on December 31, 2019, 12:10:11 AM
Fresh look with the LED’s.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on December 31, 2019, 07:52:27 AM
Just went out for a little 110 mile ride on the King.  Stopped buy SMHD to see how it was coming with my 19, wrong color exhaust heat shield came in.  Think thats all they are waiting on now.
Title: Re: What did you do to or on your CVO today?
Post by: Tail Rider on December 31, 2019, 11:25:30 AM
Replaced the stock lights with LED’s. Huge difference.
Left passing lamp is halogen and right is LED.

What brand did you use or are they Harley?
Title: Re: What did you do to or on your CVO today?
Post by: Aussie on December 31, 2019, 03:32:25 PM
What brand did you use or are they Harley?

LED Factor mart, they had a sale so I thought I would give them a go at $175 delivered to Australia.
The only negative I have lens is plastic. Not sure what the lens is on genuine HD LED's.

https://www.ledfactorymart.com/collections/harley-7-inch-headlight-with-bezel-1/products/7inch-led-headlight-4-5inch-fog-passing-lights-for-harley-w-bracket-ring

https://www.ledfactorymart.com/pages/harley-headlights


Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on January 01, 2020, 09:27:40 AM
I did a 140 mile loop on the 13 CVO King yesterday.  Getting ready to head out with my group for our Frosty toes ride in 30 minutes.  Its just now hit 30 degrees.
Title: Re: What did you do to or on your CVO today?
Post by: Smoketown on January 01, 2020, 09:37:03 AM

Getting ready to put one inch Bat Wing mini-apes on Bertha ...   

Wish me luck!

Installation tips also welcome.    ;)
Title: Re: What did you do to or on your CVO today?
Post by: bbrown on January 01, 2020, 11:23:15 AM
LED Factor mart, they had a sale so I thought I would give them a go at $175 delivered to Australia.
The only negative I have lens is plastic. Not sure what the lens is on genuine HD LED's.

https://www.ledfactorymart.com/collections/harley-7-inch-headlight-with-bezel-1/products/7inch-led-headlight-4-5inch-fog-passing-lights-for-harley-w-bracket-ring

https://www.ledfactorymart.com/pages/harley-headlights

Nice.. Please give us an update after they are installed and used.   Thanks
Title: Re: What did you do to or on your CVO today?
Post by: Aussie on January 01, 2020, 05:10:10 PM
Nice.. Please give us an update after they are installed and used.   Thanks

Went for a ride last night and was impressed with the light quality, crisp white.
Low Beam, perfect for suburban riding.
High Beam, long distance lighting is good.
Passing Lamps, very wide beam lights up both sides of road like day light.

I was a bit sceptical when I come across them at first but glad I installed them.
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on January 09, 2020, 12:55:10 PM
My dealer's service manager called me the other day and asked if she could send someone out to pick up my bike free of charge and run it through a multi point check before the warranty ran out (obviously they are a little slow this time of year) . I mentioned that there is a tiny bit of moisture in the speedo as I was racking my brain thinking of what could be done while still under warranty and they concurred and said that they couldn't find anything else that needed attention. Outstanding!
So they ordered a new speedo, brought my bike back to me yesterday, at no cost, and will contact me when the replacement arrives.

Pretty damn good customer service from Barbi at North Cascades Harley.



So, I got a call late last week from North Cascades Harley to tell me that my replacement speedo was finally in. We arranged for them to pick my bike up again Tuesday morning to complete the warranty replacement. They also double checked and tested my battery and charging system just for good measure, and at no charge. All tested good. They brought my bike back to me yesterday afternoon which was the next day.

I kind of expected there to be an underlying reason for them going the extra mile (60+ miles round trip) like the sale of an extended warranty but my skepticism was unwarranted.

Just plain excellent service! Obviously I will be back for my next bike and or anything else I need.

Title: Re: What did you do to or on your CVO today?
Post by: Robmay on January 09, 2020, 02:14:52 PM
Good to hear Rayson. I have a dealer hear in Florida (New Port Richey) that makes a 200 mile round trip for my warranty work and because of that they get every service I need as well as upgrades I do on my bike.

They have several dealers by the same owner. My first CVO was bought from their network in 2006. Mike Rendine is my guy there. Always takes super good care of me.

Great to hear there are others out there!


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on January 10, 2020, 07:29:33 AM
Was nice yesterday, low 50's.  So I took the king to my DR visit and a little ride after, nice to get out.
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on January 10, 2020, 11:41:56 AM
Good for you Dave. I can usually get out this time of year although the weather is hit or miss, but very wet so far this year with threats of snow.  :-\
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on January 10, 2020, 12:35:25 PM
Was nice yesterday, low 50's.  So I took the king to my DR visit and a little ride after, nice to get out.

Gonna be a record high tomorrow, Dave...predicting 75 but rain and storms.  Sunday looks good... :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on January 11, 2020, 07:59:24 AM
Gonna be a record high tomorrow, Dave...predicting 75 but rain and storms.  Sunday looks good... :2vrolijk_21:
Temperature is great today, but very wet.  Hoping Sunday to get out with my club on the bike.   
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on January 13, 2020, 08:24:32 AM
Temperature is great today, but very wet.  Hoping Sunday to get out with my club on the bike.

It was a very nice ride Sunday.  About 200 miles with a high of 61, which is great for East TN middle of January.
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on January 13, 2020, 12:58:47 PM
Good for YOU Dave! lol

Watched my Seahawks lose yesterday and then this....  >:(

Title: Re: What did you do to or on your CVO today?
Post by: JoeVibe on January 13, 2020, 01:10:30 PM
Spent the morning ordering my fat front tire stuff from Native Custom and a pair of 14" bars from Factory 47 for the Road Glide. Now I'm waiting for the delivery guys.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on January 14, 2020, 07:56:52 AM
That fat tire should be real nice on your CVO Road Glide.  I'm sure your anxious for the part now.
Title: Re: What did you do to or on your CVO today?
Post by: JoeVibe on January 14, 2020, 09:37:35 AM
That fat tire should be real nice on your CVO Road Glide.  I'm sure your anxious for the part now.

Thanks Dave. I put a fat tire on the Road King two years ago and I love it. Besides the look, which I love, the bike handles a lot better with the fat front tire.
Title: Re: What did you do to or on your CVO today?
Post by: BigLew on January 14, 2020, 11:17:37 AM
So 68 degrees yesterday here in Greensboro. Met with some guys and gals after church had a bite to eat then a nice 110 mile ride up close to Hanging rock. I rode the BigDog and at time it was a bit challenging. Nice short sleeve day!

BigLew
Title: Re: What did you do to or on your CVO today?
Post by: johnsachs on January 14, 2020, 05:54:59 PM
Same thing myself, and 4 of my friends did yesterday. 84 degree day, great ride, I got back around 3:30 as I had to call in a parts order, and take care of some other business.
John
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on January 16, 2020, 07:35:13 AM
Plan to Ride the CVO King over to dealer to pick up my 19 CVO Road Glide.  Repairs are finally complete to it after I was hit last October.  Took for ever to get painted parts.  Look forward to riding it again.
Title: Re: What did you do to or on your CVO today?
Post by: Critical on January 17, 2020, 12:35:20 AM
I've got a few small projects under way...  :bananarock:

(http://www.cvoharley.com/smf/gallery/46818_17_01_20_12_32_28.jpeg)

(http://www.cvoharley.com/smf/gallery/46818_17_01_20_12_31_07.jpeg)

(http://www.cvoharley.com/smf/gallery/46818_17_01_20_12_31_47.jpeg)
Title: Re: What did you do to or on your CVO today?
Post by: acevtwin on January 17, 2020, 09:26:41 AM
"Small Projects" Lol
Title: Re: What did you do to or on your CVO today?
Post by: RivRaptor on January 18, 2020, 01:52:14 PM
Man, don't envy you fishing the wires through those sharp bends!  Had a hell of a time fishing mine & my bars bends were more rounded!  But I'm a gutten for punishment cause I just bought heated grips for my 17'....
Title: Re: What did you do to or on your CVO today?
Post by: johnsachs on January 18, 2020, 07:38:27 PM
Another sunny, 75 degree day in Central Florida paradise. Perfect for a ride with friends on some back roads. 2 stops for thirst quenching, and a bite to eat.
Title: Re: What did you do to or on your CVO today?
Post by: johnsachs on January 18, 2020, 07:40:54 PM
.
Title: Re: What did you do to or on your CVO today?
Post by: Mr. Warlock on January 19, 2020, 08:23:28 AM
Another sunny, 75 degree day in Central Florida paradise. Perfect for a ride with friends on some back roads. 2 stops for thirst quenching, and a bite to eat.

Which place is that? I want go there next time down there.
Title: Re: What did you do to or on your CVO today?
Post by: johnsachs on January 19, 2020, 03:57:48 PM
Which place is that? I want go there next time down there.
PIRAT'S OASIS,
Rt. 42, Weirsdale, Fl.
It's part of the Lake Griffin chain. Gator infested.
Title: Re: What did you do to or on your CVO today?
Post by: Robmay on January 19, 2020, 04:42:05 PM
There’s also another one on the Harris chain called Lake Harris Hideaway. Nice place. Biker friendly.


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: johnsachs on January 19, 2020, 04:52:52 PM
There’s also another one on the Harris chain called Lake Harris Hideaway. Nice place. Biker friendly.


Sent from my iPhone using Tapatalk
We were just there 2 weeks ago on my buddies boat. Ate at the Hideaway. Then rafted with another couple on Lake Harris. 3 lake trip from Mt. Dora.
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on January 19, 2020, 05:55:57 PM
Sat on my new 2020 Street Glide today for the first time.
Will be picking up next Saturday.
Title: Re: What did you do to or on your CVO today?
Post by: Mr. Warlock on January 20, 2020, 07:16:11 AM
PIRAT'S OASIS,
Rt. 42, Weirsdale, Fl.
It's part of the Lake Griffin chain. Gator infested.

Thanks to both of you for the info!!
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on January 25, 2020, 07:32:34 AM
Not suppose to rain today with a High of 43, so I think I will try to put a few miles on the 19 CVO road glide. 
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on January 28, 2020, 06:53:12 AM
Planning on Riding Red Pepper over the Dragon and Moonshiner 28 to Bryson City NC for lunch.  Will be cold 32 degrees when we leave out but should warm to 51 degrees.  Wanting to get a nice 250 mile ride in.
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on January 28, 2020, 08:06:25 AM
Rode over the weekend and attempting to connect the wireless headsets, will have to take another crack at it this next weekend.
Rider headset worked fine, intercom worked with the passenger.  Just no radio through the passenger headset.
Title: Re: What did you do to or on your CVO today?
Post by: longlast on January 28, 2020, 11:05:55 AM
I've got a few small projects under way...  :bananarock:

(http://www.cvoharley.com/smf/gallery/46818_17_01_20_12_32_28.jpeg)

(http://www.cvoharley.com/smf/gallery/46818_17_01_20_12_31_07.jpeg)

(http://www.cvoharley.com/smf/gallery/46818_17_01_20_12_31_47.jpeg)

Be a good time to change out that automatic primary chain adjuster
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on January 29, 2020, 07:42:01 AM
Planning on Riding Red Pepper over the Dragon and Moonshiner 28 to Bryson City NC for lunch.  Will be cold 32 degrees when we leave out but should warm to 51 degrees.  Wanting to get a nice 250 mile ride in.

It was a great ride, 271 miles of very scenic roads, winter does allow better views as the leaves do not block the views of the rivers and mountains.  We took 19/74 back through the gorge. 

Smokey Mountains newest Outpost in Bryson City. 

Title: Re: What did you do to or on your CVO today?
Post by: Phreakyz on January 30, 2020, 04:44:32 PM
Finally got the Spoiler and the wiring all done on the chopped tour-pac.    Power locks working great and even added some small LED strips to illuminate inside the tour-pac and shine down into the saddlebags when it's dark!   Used a Molex 6 pin connector (18.00 bucks eBay) to keep the whole thing removable.
Title: Re: What did you do to or on your CVO today?
Post by: Phreakyz on January 30, 2020, 04:45:15 PM
Finally got the Spoiler and the wiring all done on the chopped tour-pac.    Power locks working great and even added some small LED strips to illuminate inside the tour-pac and shine down into the saddlebags when it's dark!   Used a Molex 6 pin connector (18.00 bucks eBay) to keep the whole thing removable.
PIC 2
Title: Re: What did you do to or on your CVO today?
Post by: Phreakyz on January 30, 2020, 04:45:42 PM
Finally got the Spoiler and the wiring all done on the chopped tour-pac.    Power locks working great and even added some small LED strips to illuminate inside the tour-pac and shine down into the saddlebags when it's dark!   Used a Molex 6 pin connector (18.00 bucks eBay) to keep the whole thing removable.
PIC3
Title: Re: What did you do to or on your CVO today?
Post by: Phreakyz on January 30, 2020, 04:46:06 PM
Finally got the Spoiler and the wiring all done on the chopped tour-pac.    Power locks working great and even added some small LED strips to illuminate inside the tour-pac and shine down into the saddlebags when it's dark!   Used a Molex 6 pin connector (18.00 bucks eBay) to keep the whole thing removable.
PIC4
Title: Re: What did you do to or on your CVO today?
Post by: Phreakyz on January 30, 2020, 04:46:33 PM
Finally got the Spoiler and the wiring all done on the chopped tour-pac.    Power locks working great and even added some small LED strips to illuminate inside the tour-pac and shine down into the saddlebags when it's dark!   Used a Molex 6 pin connector (18.00 bucks eBay) to keep the whole thing removable.
PIC5
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on January 31, 2020, 07:33:16 AM
Nice work on the tour pack with the wiring and the lighting.
Title: Re: What did you do to or on your CVO today?
Post by: kevin_n on February 01, 2020, 10:22:56 PM
Very nice, like the bag lights too. Bought some for mine and the wife's bikes, gotta wait till spring to put them on though.  :-\
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on February 02, 2020, 07:32:25 AM
Looks to be a nice Sunny day, so I will pick the CVO King up from Smoky Mountain HD. She just had front and rear brakes flushed and bleed, and her service done.  May go ride up and over the Foothills parkway as that always a nice ride.
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on February 02, 2020, 04:35:43 PM
Mid to upper 60s today.  It was great.  Took the Road King to a lunch place about an hour away.  Bike's battery didn't want to come home.  Dammit.  Thank gawd for parking lots with a downhill slope.  New battery on the way.  Almost exactly three years old.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on February 03, 2020, 06:23:12 AM
Mid to upper 60s today.  It was great.  Took the Road King to a lunch place about an hour away.  Bike's battery didn't want to come home.  Dammit.  Thank gawd for parking lots with a downhill slope.  New battery on the way.  Almost exactly three years old.
Nice you could get out for a ride, that sucks about battery but thats about what they last for me, on a tender.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on February 03, 2020, 06:27:01 AM
Looks to be a nice Sunny day, so I will pick the CVO King up from Smoky Mountain HD. She just had front and rear brakes flushed and bleed, and her service done.  May go ride up and over the Foothills parkway as that always a nice ride.
Very nice ride over the Foothills Parkway yesterday a bit windy but nice low 60's temperatures.  Ride wast along 129/72 and the Little Tennessee River was also nice.  Plan to get out on Red Pepper today for a DR appointment, then a short ride after as it will be mid 60's.

Foothills Parkway
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on February 03, 2020, 06:28:59 AM
Little Tennessee River and my 13 CVO Road King.

Title: Re: What did you do to or on your CVO today?
Post by: longlast on February 03, 2020, 02:48:13 PM
Was a sunny 13° today took the opportunity of the sun and gave the bike a good needed wash and polish.

Now it's nice and clean and shiny for when the next above 10° sunny dry roads day comes round.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on February 04, 2020, 08:00:44 AM
Rode to DR appointment yesterday then a very nice 175 mile ride after on the great roads of East TN.  Rode TN 360, then up the Cherohala Sky way a ways and also over to Bald River falls which were flowing good.  Then down TN 39, all great curvy roads.  Weather was great got to ride in Jeans, a sweat shirt and no gloves, in February. 

Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on February 04, 2020, 12:17:13 PM
Good for you Dave. Bike is looking good. Been so record breaking wet here in the Seattle area that I haven't been able to get out hardly at all.  :-\
Title: Re: What did you do to or on your CVO today?
Post by: noharley on February 04, 2020, 04:23:06 PM
Little Tennessee River and my 13 CVO Road King.

Good Gawd, that King is a great looking bike Dave....
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on February 05, 2020, 07:47:44 AM
Good for you Dave. Bike is looking good. Been so record breaking wet here in the Seattle area that I haven't been able to get out hardly at all.  :-\

Looks like that here now, rain all of yesterday and now today.  Calling for rain everyday until Sunday, then again all next week. 

Good Gawd, that King is a great looking bike Dave....

Thank you.  I really enjoy the King, loads of fun with the built motor, and looks stock.

Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on February 06, 2020, 06:21:18 AM
With all the heavy rains for the last two days, and now today.  I installed a new air cleaner on the Red Pepper.  I also had to the Yaffe plate frame off to put the new year tag on my plate, then re-installed it.  Then I had to do some welding on my solo luggage rack as it had broke one of the welds.  Got that done.  Will use it this coming week for a ride to FL, then when I get back it will have to go to the powder coaters again.  May have to look for other bike projects today.  This rain is getting ridiculous. 
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on February 06, 2020, 01:53:18 PM
What A/C did you go with Dave? Grandtravis on this site may be interested in your stock Heavy Breather if you want to sell it.

There is a rattle can paint that you can use to touch up your repair with that works excellent and is 2nd only to powder coat. It is called "Hammerite" and is made by the makers of KILZ. Really good stuff. You can even spray it into the lid and use a brush or a Qtip to apply it for touch up if necessary.

It's so wet here I can't get out for a ride but supposedly we get a break this coming Sunday and Monday so hopefully the back roads will dry out enough to get out there.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on February 07, 2020, 07:11:10 AM
What A/C did you go with Dave? Grandtravis on this site may be interested in your stock Heavy Breather if you want to sell it.

There is a rattle can paint that you can use to touch up your repair with that works excellent and is 2nd only to powder coat. It is called "Hammerite" and is made by the makers of KILZ. Really good stuff. You can even spray it into the lid and use a brush or a Qtip to apply it for touch up if necessary.

It's so wet here I can't get out for a ride but supposedly we get a break this coming Sunday and Monday so hopefully the back roads will dry out enough to get out there.

I just replaced the stock filter in the stock heavy breather.  That said in a couple weeks or so I will be putting the Heavy Breather Extreme on.  So I would probably sell the factory heavy breather.

I guess I will have to look and see this Hammerite made by KILZ as Its only a small area that needs touch up, and the rack is only on the bike when I have luggage on the bike so it would not even be seen.

May ride down to FL Saturday and come home Wednesday. 
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on February 07, 2020, 06:49:56 PM
Come on down Dave. Be happy to see you.  👍. Stuart.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on February 08, 2020, 06:33:19 AM
Hoping to find a window to ride out of East TN and start down to Crystal River FL.  Trying to miss most the rain and snow.  Having to delay the time we leave due to weather so it will be two days down.
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on February 08, 2020, 07:12:02 AM
I'm way south and east of where you will be. Next time. Unless you will be at bike week. Might be heading up.  Stuart.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on February 09, 2020, 06:46:08 AM
Will not be able to make bike week this year, part of why I came down now.  Will most likely be down in Cape Coral the week before bike week. 

The weather got worse so I did not make it out on the bike.  Snow covered roads for the first 120 miles of the trip.  Then rain the last 100.  Figured the truck was safer.

Title: Re: What did you do to or on your CVO today?
Post by: BigLock on February 15, 2020, 07:14:41 PM
Rode out to Full Throttle  Fear of February party today it's a annual party that the magazine puts on each yr. At bars that support the magazine all yr. With free 1000 lbs of oyster for your liken
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on February 16, 2020, 08:04:04 AM
Yesterday did some errands on the Red Pepper, and rode over to SMHD for a bit, got a nice 130 miles on the bike.  Plan to ride over to our clubhouse today for family lunch day.
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on February 17, 2020, 12:55:20 AM
Since I have the 131 kit coming I went out today for about 300 miles trying to blow up my motor to get warranty to have to tear it down anyway. Didnt happen but sure had fun trying!
Title: Re: What did you do to or on your CVO today?
Post by: OBB on February 17, 2020, 05:55:05 AM
Since I have the 131 kit coming I went out today for about 300 miles trying to blow up my motor to get warranty to have to tear it down anyway. Didnt happen but sure had fun trying!
  :huepfenlol2: :huepfenlol2: :2vrolijk_21: :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on February 17, 2020, 08:12:56 AM
Since I have the 131 kit coming I went out today for about 300 miles trying to blow up my motor to get warranty to have to tear it down anyway. Didnt happen but sure had fun trying!
Alan, That sounds like fun.  Nice on the 131 kit coming.


Will ride to my Dr. appointment today, about 58 mile round trip, mostly all back twisty roads, River road hwy 304 and hwy 70 between Kingston and Lenoir city both great roads, after that wee will ride down to Chattanooga for a New Whiskey tasting.
Title: Re: What did you do to or on your CVO today?
Post by: TNCarters on February 17, 2020, 07:10:43 PM
Nice day today in 60’s.  Dropped my RGU by an Indy shop I’ve been wanting to try out for steering bearing maintenance and a new comp. Been idling a little rough with a clunk when it shuts down and kind of figured it was due for a compensator.  Tech agreed.  Guess 35k is not bad for original comp.
Title: Re: What did you do to or on your CVO today?
Post by: Critical on February 19, 2020, 12:05:10 AM
98% finished with the Winter projects:

- Native fat front end
- Blacked out most of the chrome
- Zippers Red Shift 468 cam and tune
- FMB Mayhem Hell Razor bars
- Custom Dynamics ProBeam turn signals/driving lights
- Rigid spot lights
- Yaffe license plate holder

Remaining updates:
- Sony XAV-AX7000
- Dominion shifter pegs and brake pedal

(http://www.cvoharley.com/smf/gallery/46818_18_02_20_11_49_02.jpeg)
(http://www.cvoharley.com/smf/gallery/46818_18_02_20_11_49_26.jpeg)
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on February 19, 2020, 07:14:29 AM
That Native fat front end look great!

I added hand guards to my 2013 CVO King, have had them on my Last two CVO road glides and have grown to like them.

Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on February 19, 2020, 07:18:25 AM
My wife's has been wanting a set of hand guards also, so I added them to her 2019 RGS.

Title: Re: What did you do to or on your CVO today?
Post by: Grizzly on February 19, 2020, 01:23:30 PM
My wife's has been wanting a set of hand guards also, so I added them to her 2019 RGS.

Those are interesting extenders to the fairing.  I don't believe I've ever seen them before???

Looks good and most likely they do a wonderful job of wind protection.

May we see more of the bike please?
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on February 20, 2020, 07:04:25 AM
Those are interesting extenders to the fairing.  I don't believe I've ever seen them before???

Looks good and most likely they do a wonderful job of wind protection.

May we see more of the bike please?

I was looking, and have only a couple pictures of her bike.  Its a 2019, paint layout very similar to Skunk I had.  It is harley colors from 2011, a 3 month run of Psychedelic Purple and Black.  I was sure I had more pictures but cant locate them at the moment.

Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on February 20, 2020, 07:15:07 AM
I got a nice 239 mile ride in yesterday, mostly High 40's and very low 50's.  Good twisty roads of east TN, Hwy 30 and Hwy 52 both have tons of curves and good views.
Title: Re: What did you do to or on your CVO today?
Post by: Grizzly on February 20, 2020, 07:39:20 AM
I was looking, and have only a couple pictures of her bike.  Its a 2019, paint layout very similar to Skunk I had.  It is harley colors from 2011, a 3 month run of Psychedelic Purple and Black.  I was sure I had more pictures but cant locate them at the moment.

Thanks for the pic.

That is one beautiful looking ride your wife must enjoy... Yours isn't too bad either.   :)

I love the colour combo used and that paint scheme flows so nicely the style of the bike.  Great job all around.  :2vrolijk_21:

Thanks again!


PS - Upon further viewing of the original pic, it must have been the lighting and reflection that was throwing me re: fairing extensions???  Duh, I'll be alright in a day or two.   ;D
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on February 22, 2020, 06:30:45 AM
Thanks Grizzly


Yesterday, I rode over to the dealer to have the 20K service done and the left hand switch housing replaced due to volume button not working.  All good on the service, however they will have to do more troubleshooting as volume button still not working but you can got into settings on the head unit and adjust the volume.

Today I plan to ride down to Elijay GA  to have lunch at the Cajun Depot.  One route down and a different coming back, should make a nice 200 mile ride.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on February 23, 2020, 07:24:06 AM
Prior to yesterdays 270 mile Lunch ride to Ellijay GA I installed a plug in the mid frame heat deflector for my heated gear.  I have done this on past bikes, but did no want to drill the painted part, but no other way seemed as nice, I tired other ways for several months.

I will be riding the 13 CVO King over to Smoky Mountain HD to enter the Dyno shoot out they are running this week.  Will be interesting to see how I do against other twin cams.
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on February 23, 2020, 08:06:50 AM
Looks really good Dave. 👌... Stuart
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on February 25, 2020, 06:55:14 AM
Thanks Stuart,

Yesterday I did the software update for the WHIM and for the BOOM Sena 20S for the Red Pepper.  Today I plan to ride the bike a couple hundred miles and see if the Update helps with Phone volume.  I have a Boom 30K coming as I read it has much better battery life.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on February 26, 2020, 05:28:52 AM
Great 274 mile ride yesterday.  Natahala River Gorge is also beautiful.

Title: Re: What did you do to or on your CVO today?
Post by: Phreakyz on February 26, 2020, 02:18:51 PM
Great 274 mile ride yesterday.  Natahala River Gorge is also beautiful.

Great Pic!
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on February 26, 2020, 10:53:39 PM
Great 274 mile ride yesterday.  Natahala River Gorge is also beautiful.
Was the phone volume any better?
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on February 27, 2020, 07:36:04 AM
Was the phone volume any better?

No.  Found out its an issue with the iPhone 11, 11 Pro and 11 Pro Max.  When using CarPlay you can answer a call but you will hear nothing, and the other person will not hear you.  Same when you make a call.  If your not using CarPlay you can barely hear the phone, not loud enough to talk for sure.  Harley and Apple both know about the issue.  Doesn't matter if your using the 20's or the 30K sena units. 

Aggravating to say the least, but I sure can use siri to text with no issue, or tell the map to find some place just fine.
Title: Re: What did you do to or on your CVO today?
Post by: spook120 on February 27, 2020, 05:12:21 PM
Sold both my bikes:  2017 GSA BMW and my 2017 CVO to the same person.  I have been contemplating this for a number of years and FOR NOW it was the correct decision. Guess I will have to play with my jeep. 
Title: Re: What did you do to or on your CVO today?
Post by: johnsachs on February 27, 2020, 06:31:32 PM
Like this ?
John
Title: Re: What did you do to or on your CVO today?
Post by: Devilldawgg_CVO on February 27, 2020, 06:55:56 PM
No.  Found out its an issue with the iPhone 11, 11 Pro and 11 Pro Max.  When using CarPlay you can answer a call but you will hear nothing, and the other person will not hear you.  Same when you make a call.  If your not using CarPlay you can barely hear the phone, not loud enough to talk for sure.  Harley and Apple both know about the issue.  Doesn't matter if your using the 20's or the 30K sena units. 

Aggravating to say the least, but I sure can use siri to text with no issue, or tell the map to find some place just fine.

I spoke with SENA and said the problem is with iOS 13, if you didn’t upgrade or get a new iPhone with it already installed then you’d be good.


Sent from my iPad using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on February 28, 2020, 05:28:56 AM
I spoke with SENA and said the problem is with iOS 13, if you didn’t upgrade or get a new iPhone with it already installed then you’d be good.


Sent from my iPad using Tapatalk

I agree partly with that.  All of CarPlay works fine with the HD Head Unit and Sena, getting directions, talk to text and so on.  Just phone calls do not work.

Why does the new iPhone work fine with a 3 Year old truck thats never had a software update?  Why does it work fine with a 2 year old car that never had an update but does not work with a New bike that has had several updates?

Harley had a much worse track recorded of software that doesn't work right than Apple does.  3 and 4 years and Harley still has bugs in its soft ware.  Not so with Apple.

Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on February 28, 2020, 05:30:21 AM
My wife and I plan to ride our Bikes to FL today.  Hope we can get out of TN before the bad weather comes.  Plan to spend a few days riding south FL. 
Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on February 28, 2020, 07:46:56 AM
My wife and I plan to ride our Bikes to FL today.  Hope we can get out of TN before the bad weather comes.  Plan to spend a few days riding south FL.
Have a great trip. See you when you get back.

Sent from my SM-N975U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: Robmay on February 28, 2020, 08:40:18 AM
Let me know if you need any help while you’re down here Dave. I’m in Ocala. - Rob


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: dayne66 on February 28, 2020, 10:29:07 AM
Waited....for a call from the dealer. Had the engine rebuilt last March( ESP for $56 for a total $10,500 CDN)....I reported it as noisy....was told it's not.......it smokes and uses oil......leaks at bottom of jugs......it's torn down now.....waiting for a report.

Wanted to go to a different dealer...but......labour would be at my expense.
Title: Re: What did you do to or on your CVO today?
Post by: Devilldawgg_CVO on March 02, 2020, 11:46:17 PM
I agree partly with that.  All of CarPlay works fine with the HD Head Unit and Sena, getting directions, talk to text and so on.  Just phone calls do not work.

Why does the new iPhone work fine with a 3 Year old truck thats never had a software update?  Why does it work fine with a 2 year old car that never had an update but does not work with a New bike that has had several updates?

Harley had a much worse track recorded of software that doesn't work right than Apple does.  3 and 4 years and Harley still has bugs in its soft ware.  Not so with Apple.

Simply telling you what SENA tech support told me, passing on info


Sent from my iPad using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on March 05, 2020, 08:30:43 AM
Simply telling you what SENA tech support told me, passing on info


Sent from my iPad using Tapatalk

The only apple having the issue are the 11, 11Pro and the 11 Pro max.  They all do run IOS 13.  That said the problem isn't in IOS 13 or the phone or it would not work in all the cars and trucks out there.  The only vehicle I have found it to not work with is the Harley. 

I can see why Sena would say IOS 13 as that is the only one they are getting complaints on.  I doubt they have tested the IOS software on other cars or trucks.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on March 05, 2020, 08:34:57 AM
Put 1821 miles on the bike on the FL trip.  Snowed a bit on us leaving TN but not bad and not sticking.  Then a great trip until we got near Ocala FL Friday.  Last 15 miles to Ocala took 95 minutes, interstate was a mess as were all the back roads.  Got to Cape Coral FL before noon Saturday and had a great three days there.  Perfect weather and some good rides with friends.  Nice ride Tuesday up and out of FL until it started raining in Macon, about 45 miles in the rain before we stopped.  Then Wednesday the first 120 miles in the rain and the last 100 no rain.  A good trip and a safe trip.
Title: Re: What did you do to or on your CVO today?
Post by: acevtwin on March 05, 2020, 09:17:52 AM
Got my trailer checked out, prepped and loaded the bike.
Heading for Daytona Beach Bike week Friday.
Title: Re: What did you do to or on your CVO today?
Post by: BigLock on March 05, 2020, 08:21:17 PM
Good deal Dave on your trip to Fla and back home safe.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on March 08, 2020, 07:31:48 AM
Just a short local ride yesterday on the Red Pepper, 165 miles.
Title: Re: What did you do to or on your CVO today?
Post by: dayne66 on March 08, 2020, 11:43:40 AM
Waited....for a call from the dealer. Had the engine rebuilt last March( ESP for $56 for a total $10,500 CDN)....I reported it as noisy....was told it's not.......it smokes and uses oil......leaks at bottom of jugs......it's torn down now.....waiting for a report.

Wanted to go to a different dealer...but......labour would be at my expense.
Waiting on parts......HD parts supply has apparently gone "global"...and the rail blockades....are making parts take some extra time to ship

Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on March 09, 2020, 06:51:58 AM
I'll be dropping Red Pepper off at the dealer today.  They have to troubleshoot the volume control for the left handle bar.  Replaced the left side switch unit and that did not fix it.  I'm guessing its in the BCM.  Also going to have them look at speedometer as it has drips on the inside, the many model year issues that still is not fixed.

Title: Re: What did you do to or on your CVO today?
Post by: Phreakyz on March 10, 2020, 12:14:26 PM
Officially wrapped up all of my Winter Bike Projects...
5K Service - Done
Kahuna Heated Grips - Done
Passenger Floor Boards - Done
Rinehart DBX 4.5" Slip Ons - Done
Tour Pack - Done
Now if it will just stop raining...
Title: Re: What did you do to or on your CVO today?
Post by: Phreakyz on March 10, 2020, 12:14:58 PM
Pic 2
Title: Re: What did you do to or on your CVO today?
Post by: Phreakyz on March 10, 2020, 12:15:22 PM
Pic 3
Title: Re: What did you do to or on your CVO today?
Post by: Rstarnes67 on March 10, 2020, 01:57:50 PM
Like the title says, what did you do to or on your CVO today?
Well the water pump finally gave out on my 15 CVO Limited. Parts ordered.
Also one of my speakers on the front stopped working. Getting all fixed up before riding season is in full swing.


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Robmay on March 10, 2020, 07:11:25 PM
Looking great Phreakyz!


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: CVODON on March 10, 2020, 08:19:11 PM
 Phreakyz that TourPak without a luggage rack looks so nice. Good Job!
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on March 11, 2020, 08:27:57 AM
Looks very good Phreakyz.  I did the Kona heated grips on my Red Pepper as soon as I got the bike, they match pretty good.  The work great, headed grips are a must for me as I ride year round.
Title: Re: What did you do to or on your CVO today?
Post by: HOGMIKE on March 11, 2020, 11:02:12 AM
Looks very good Phreakyz.  I did the Kona heated grips on my Red Pepper as soon as I got the bike, they match pretty good.  The work great, headed grips are a must for me as I ride year round.

Did your red pepper bike come without heated grips?
 :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: Phreakyz on March 11, 2020, 12:21:46 PM
Thanks Guys!   Dave you talked me into the heated grips!   They were never really on my radar!   I am pretty impressed with them so far.   They get real hot.   Have to set it around 2 or 3 for comfort.

2019 CVO Road Glides did not get factory heated grips because they came with the Defiance Collection and Defiance does not offer any heated grips.    Had to go with the Kahuna Collection.    Close enough in appearance.

The 2019 CVO Street Glides came with the Kahuna Collection and with OE Heated Grips.   
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on March 12, 2020, 08:03:38 AM
Did your red pepper bike come without heated grips?
 :nixweiss:

Yes,  The CVO Road Glide's have never come with heated grips until the 2020 1/2 bike.  The 2015 and 2016 CVO Road Glide ultra did come with heated grips.

The first CVO street glide to come with heated grips was the 2018, Harley said the 2017 CVO street glide was getting them, but it did not.

Thanks Guys!   Dave you talked me into the heated grips!   They were never really on my radar!   I am pretty impressed with them so far.   They get real hot.   Have to set it around 2 or 3 for comfort.

2019 CVO Road Glides did not get factory heated grips because they came with the Defiance Collection and Defiance does not offer any heated grips.    Had to go with the Kahuna Collection.    Close enough in appearance.

The 2019 CVO Street Glides came with the Kahuna Collection and with OE Heated Grips.   

I have never had mine over 2, as the do get hot.

CVO road glides never came with heated grips even when the collection on the CVO Road Glide was the CVO Limited or CVO Street Glide.  I know as I added them to my 12 CVO road Glide using them from the CVO Limited, did the same in 13 for My CVO King.  And again with my 17 CVO Street Glide.

18 is the first year the CVO Road Glide used a different collection than the other CVO touring bike, 19 followed suit.  2020 they all use the same collection.
Title: Re: What did you do to or on your CVO today?
Post by: longlast on March 13, 2020, 12:20:34 PM
Upgraded the  windshield   

The old
Title: Re: What did you do to or on your CVO today?
Post by: longlast on March 13, 2020, 12:21:46 PM
The new,...
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on March 15, 2020, 07:46:39 AM
We have had lots of rain in east TN, and another week of rain predicted every day.  I did manage to get in an 167 mile ride yesterday to get some groceries and prescriptions.  I did get sprinkled on a few times, but nothing serious and it did not go though the leathers.  The king performed flawlessly.

Today I'll pick up Red Pepper from the dealer.  They fixed the volume control, and have new rotors for the front on order and a new speedometer.  Then I'll stop by a friends home and we will start building the engine on Red Pepper.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on March 15, 2020, 09:32:49 AM
Dropped off the rear rim/tire for some new rubber yesterday at the dealer. Without starting a debate, I'll say that I'm going with an American Elite this time to see if it goes longer without cupping than the HD tire. Will have to update this in about 8k miles. lol
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on March 16, 2020, 07:05:53 AM
Dropped off the rear rim/tire for some new rubber yesterday at the dealer. Without starting a debate, I'll say that I'm going with an American Elite this time to see if it goes longer without cupping than the HD tire. Will have to update this in about 8k miles. lol
I have American Elite on both my 2103 and 2109 CVO bikes.  The 19 has 9K miles on the tire, it is just starting to show signs of cupping where as the HD dunlop shows that at 5K.  Still no howl when laid over in a curve like a HD Dunlop.  I think I have 7K or more miles left on the tire.  We will see.  I like the tire.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on March 16, 2020, 07:09:11 AM
Yesterday we started tearing down the engine on the Red Pepper to build it, this is after just under 5 hours of work.  Bike had 22,804 miles on it at the start.  Will work on her today until its time to go to DR appointment. 

(http://www.cvoharley.com/smf/gallery/6353_16_03_20_6_29_21.jpeg)

(http://www.cvoharley.com/smf/gallery/6353_16_03_20_6_30_24.jpeg)
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on March 16, 2020, 12:04:49 PM
So what will your total build consist of Dave? I assume complete S&S camchest upgrade with their lifters and pushrods? Black lifter blocks and push rod tubes like I did? What cam did you decide on?

Curious minds need to know!  :huepfenjump3:
Title: Re: What did you do to or on your CVO today?
Post by: MC16LTD on March 16, 2020, 01:42:36 PM
Installed Rockout's and a CoolFlow Fan kit.   Once I figured out the base circle, the process went ok (btw i must be weak because there was no way I was rolling the tire in 5th even with spark plugs out to move the rockers so I just moved the bike fore and back).  CoolFlow fan was pretty easy to get put in and came with all the parts, will see how it works next time I ride in traffic.   As a benefit of spending a the weekend that sports died, I did find that my front spark plug must have been cracked as it split in half as soon as the socket touched it (boot may have been holding it together) so replaced them as well.

Bike seems a bit quieter in the rockers and hopefully will keep my leg a bit cooler.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on March 17, 2020, 06:13:13 AM
So what will your total build consist of Dave? I assume complete S&S camchest upgrade with their lifters and pushrods? Black lifter blocks and push rod tubes like I did? What cam did you decide on?

Curious minds need to know!  :huepfenjump3:

No, not S&S cam chest.  Using the 2020 HD 8 lobe oil pump.  Most major builders are getting very good results with it.  One builder is selling all his used S&S oil pumps as better results with HD latest one.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on March 17, 2020, 06:19:12 AM
Got a lot done in 3.5 hours yesterday.  Time was limited due to DR appointment.

Got the primary apart, old clutch out and then installed the new Recluse Torque drive clutch.  It has twice as many plates as stock so way more surface area to handle the increased torque and HP.  We will see how it works soon.

(http://www.cvoharley.com/smf/gallery/6353_17_03_20_5_44_45.jpeg)

Then we got the cam chest torn apart, oil pump out, cam out, cam bearings out.  Installed new inner cam bearing, then the CR-482 cam was installed.  Installed the 2020 HD 8 lobe oil pump, installed the rest of the parts for the cam chest, then the Woods Alpha lifters and S&S ant rotation lifter cuffs.

(http://www.cvoharley.com/smf/gallery/6353_17_03_20_5_51_58.jpeg)


We have much more time to work on her today.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on March 18, 2020, 07:48:22 AM
We spent 11 hours working on putting the motor together yesterday.  Very productive.

We got the pistons installed, the S&S cylinders installed, the heads installed with Adjustable rocker arms, the HPI port matched intake and HPI 62 mm throttle body installed also, its almost to good looking to cover.  6.1 injectors in.  I also went with black lifter block covers and push rod covers. 

(http://www.cvoharley.com/smf/gallery/6353_18_03_20_7_30_28.jpeg)

Motor is together, installed the Heavy Breather extreme, very tight fit with the Fang, about 1/3 inch clearance.  However it or the Ventilator extreme is needed to flow enough air.  Started right up, and did the first heat cycle.

(http://www.cvoharley.com/smf/gallery/6353_18_03_20_7_12_23.jpeg)

Today I need to get a two more heat cycles done, then a little ride to seat the rings.  Also need to put things back on like mid frame heat deflectors, heat shields, floor boards and so on. 
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on March 18, 2020, 11:42:29 AM
Lookin good Dave. Thanks for the update.
Title: Re: What did you do to or on your CVO today?
Post by: Phreakyz on March 18, 2020, 11:53:43 AM


... Got the primary apart, old clutch out and then installed the new Recluse Torque drive clutch.  It has twice as many plates as stock so way more surface area to handle the increased torque and HP.  We will see how it works soon.


I'd like to know more about the Recluse Clutch after you've used it for a while.   I am hearing a lot of stuff about these lately.    One of my friends even said you don't have to use the clutch anymore at lights?  Is that true?  Or maybe only true for some models?
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on March 19, 2020, 07:14:59 AM
I'd like to know more about the Recluse Clutch after you've used it for a while.   I am hearing a lot of stuff about these lately.    One of my friends even said you don't have to use the clutch anymore at lights?  Is that true?  Or maybe only true for some models?
Recluse has two clutches for the CVO bikes.  I used the Recluse Torque Drive, which works just like your existing clutch.  Big difference is all the friction plates and plates are thinner, so it has twice as many of them inside the clutch basket.  This gives twice as much surface area for the clutch to develop gripping pressure.  Leave pull only a little harder than stock.

They also make an Auto clutch.  Yes you can sit at a light in gear and not have the lever in, as rpms go up clutch engages.  Clutch lever still works if you want.  Not sure all the details but this is it in a nut shell.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on March 19, 2020, 07:18:59 AM
Well finished putting all the parts on the bike yesterday.  I got two more heat cycles done on the bike.  Then once cool, started it again and took it for a little ride to seat the rings good.  Then I rode her home.  I have 62 miles on it.  Motor is quiet and smooth, and feels real strong.  It does need a tune as its rich below 3000 rpm.  I have an appointment to have it Tuned on Tuesday.  I'm really anxious to have that done.   Hope to get a few more miles on it today.

(http://www.cvoharley.com/smf/gallery/6353_19_03_20_6_47_27.jpeg)
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on March 21, 2020, 07:24:05 AM
Looks like it may not rain today.  So I hope to get out and put another 100 miles on the red pepper engine,  I would like to have over 250 miles on it when it gets tuned on Tuesday.  Besides social distancing is easy on a bike.
Title: Re: What did you do to or on your CVO today?
Post by: dayne66 on March 21, 2020, 11:11:01 AM
Same as the last many days....waited for Barne's to get a couple "small parts" to finish the ESP work.
Title: Re: What did you do to or on your CVO today?
Post by: Jock on March 21, 2020, 06:08:54 PM
Put a Spring coat of Royal Blue Wax (https://www.royalbluewax.com/) on the ride!  Ready for Spring!

 :huepfenjump3:
Title: Re: What did you do to or on your CVO today?
Post by: TN on March 21, 2020, 07:50:11 PM
Put a Spring coat of Royal Blue Wax (https://www.royalbluewax.com/) on the ride!  Ready for Spring!

 :huepfenjump3:

We need pictures please  :orange:
Title: Re: What did you do to or on your CVO today?
Post by: Jock on March 21, 2020, 08:20:08 PM
We need pictures please  :orange:

The bike is under it's cover of protection now!  aka - a bunch of blankets I keep in the garage!  HA!  Looks nice though!
Title: Re: What did you do to or on your CVO today?
Post by: dayne66 on March 21, 2020, 08:42:57 PM
Same as the last many days....waited for Barne's to get a couple "small parts" to finish the ESP work.
Parts are in....will go down to Langford and pick it up on Wednesday! I will finally get to do some 'isolation therapy' !!!
Title: Re: What did you do to or on your CVO today?
Post by: JCZ on March 21, 2020, 09:58:12 PM
I've been doing a lot of day rides here in Southern Arizona. 

Yesterday I rode to the top of Mt. Lemmon which is 9,100' elevation and only 28 miles from Tucson city limits.  It was 74F when I headed up.....got up to Ski Valley up on top and it was 33F.  Glad I took my Gerbing heatd gear.

Today I rode up to Madera Canyon.  It's only 22 miles from here and only 5,600' elevation but there was snow up there, too.  Interestingly, it was 77F down here today when I left around noon.  It had to be at least 82F-84F up there in that canyon.  All the waterfalls were flowing and the parking lots for both mountains were very crowded (people trying to social distance).

Photos and videos were posted on my fb page.
Title: Re: What did you do to or on your CVO today?
Post by: iski on March 21, 2020, 10:03:43 PM
This social distancing has got me riding more.  Re-discovering some old roads & up until Friday was taking some nice 100 mile lunch rides. 

Now will be taking some nice rides but getting take out to bring home & just heading home.  Anyway the weather has been great & all that's going on has given me an incentive to ride more.  Good way to clear the head.
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on March 22, 2020, 08:26:38 AM
I figured the same thing. I went by myself on a 200 mile ride yesterday. I'm thinking the virus can't catch me at 70 mph.  :'(... I'll probably head out again today. The weather has been great here too...   Stuart
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on March 23, 2020, 01:01:32 AM
did 350 miles today, weather was perfect and lots of bikes out. My wife gave me these clear plastic gloves that are very thin to use at fill ups which I dutifully took and intended to toss but when I got to the first station and grabbed my wallet they were there so I figured I would give them a shot. So this (like saran wrap) that didnt hamper me at all and I ended up spilling some gas on my hand and after trowing away the glove couldnt even smell gas.
After all this craziness over doubt I will still use them but was kinda nice and used at 2nd and 3rd fillup.
Was great to get away from the news and work where I had to furlough 50 people on Friday..
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on March 23, 2020, 06:35:22 AM
I did get out yesterday. Great weather and a really nice ride.  I couldn't believe how many bikes were out. At least I see people riding and getting away from the bad news on the TV.. Wishing everyone to stay safe.   Stuart.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on March 23, 2020, 10:22:49 AM
We have had lots of rain, pouring again today.  Prior to the rain have done some riding for social distancing.  Today the bike is going up to Moristown area to be dropped of so it can be tuned tomorrow.  Anxious to see and feel the results.  More anxious for the rain to go the heck away.
Title: Re: What did you do to or on your CVO today?
Post by: sjpi1954 on March 23, 2020, 07:53:18 PM
Just bought my first ever CVO so the list was short....
2012 FLHTCUSE with 16K Miles and 2 previous mature Cajun Owners.  Very well taken care but...

Replaced the OEM Plugs, Cleaned the SE Air Cleaner, Replaced all 3 Holes with the Redline V-Twin Package...20w50 Eng, Shockproof Pepto Bismal in the Tranny, Redline Primary and new K&N Filter.  Redline Fuel Treatment.  Brought Shock Pressure up to 35psi.  Running 40/36 on the skins per the Manual.

400 miles later I have some observations...1.  The SE110 is the noisiest TC I've ever owned.  3 Prior Dynas with an EVO and 2 TC88s never sounded like a Singer Sewing Machine on steroids. The good news is once I swapped out the whatever oil with the Redline 20W50 I could hear the 'Thank You' sounds from the engine.  2.  The new NGK Iridium Plugs made a difference in starting and running.  All good...  3.  A clean Air Filter is a healthy Harley breathing normally.  4.  2 of the guys I ride with swear by the Redline Tranny Shockproof Oil.  I now also swear by this stuff.  Wish I had used it on my prior Dynas.  5.  No ferrous metal on any of the magnetic chip detectors.  Usual amount of chain fuzz on the Primary Plug so grateful nothing appears to be coming apart internally.  6.  The last thing I did was to install the A.I.M. 84mm Variable Pressure Clutch.  Reduced my clutch pull force by about 20% and really improved the engagement oh so smooth...  $300.  7.  Swapped out the stock mini windshield with an OEM 12" Shield from a guy in our group with an Ultra Classic.  So much better and a lot less wind resistance.  Probably going to get a Recurve.

However, having now studied the 'Rocker Locker' noise issue and fix, I've decided to see if I can quiet things down a little more with a switch to the Redline 20W60.  Harley says no problem to help quiet down the SE110 Twin Cam.  NW Florida Summer of 2020?  Definitely 80F or above for the 60W to do its thing.  Good thing I have some hearing loss from 48 years of flying airplanes and helicopters...

This CVO is a first for me in so many ways and I'm really enjoying it.  Cruise Control, Fuel Injection, Rear Air Shocks, Hydraulic Clutch, 6 Speed, Back Rest, Alarm System,  Remote FOB, Factory HP SE Exhaust System, Factory Communications System, Factory Sound System, R&P Cup Holders, etc...

Definitely the heaviest Harley I've ever ridden and yet it handles really well both Solo and with a Pax. 

I'm done for now...

JP



Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on March 24, 2020, 12:36:43 AM
Enjoy your new ride.  Great color combo too. Stuart  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: CVO 2015 on March 24, 2020, 01:54:08 AM
Rode 200 miles round trip to visit Branch Heads in Long Beach on my 2015 CVO....No one on the freeways...which made the 405 bearable..

Sent from my SM-N960U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: dayne66 on March 24, 2020, 09:28:12 AM
Picked up bike at Barne's in Langford. I was the only customer there.

After last years ESP rebuild it was 'smoking'.....so....new rings and valve seals......cylinders honed.......and another new compensator....and a few other small things..... $2600 of the $3200 CDN price of a 5 year extension of the ESP (w/ tire and wheel) recovered.....so far!

And ....$3200 cdn is the best price we could find ....I seem to remember some dealers asking $4400 for 5 years w/T&W

Now, both our social distancing machines are ready to roll!




Title: Re: What did you do to or on your CVO today?
Post by: Indenial on March 24, 2020, 09:54:30 AM
Just wondering when you mentioned noise.  How many total miles?   And when were the lifters replaced?
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on March 25, 2020, 08:04:15 AM
Picked up my red pepper from the Tuner yesterday.  The build came out great its 163 HP and 167 Torque, posted dyno run in M8 section.

Hope the roads dry out today so I can go ride it now that it has been properly tuned.
Title: Re: What did you do to or on your CVO today?
Post by: Phreakyz on March 25, 2020, 09:59:07 AM
Picked up my red pepper from the Tuner yesterday.  The build came out great its 163 HP and 167 Torque, posted dyno run in M8 section.

Hope the roads dry out today so I can go ride it now that it has been properly tuned.
Holy crap!   That sounds incredible!
Title: Re: What did you do to or on your CVO today?
Post by: dayne66 on March 25, 2020, 10:22:47 AM
Just wondering when you mentioned noise.  How many total miles?   And when were the lifters replaced?
Noticed it getting noisy 2 years ago at about 45,000km.....dealer kept saying 'normal'.....tore top end down at 65,000km and found scored cam lobes....took to dealer for ESP........$10,500 cdn in ESP including much else.
Title: Re: What did you do to or on your CVO today?
Post by: CVO 2015 on March 25, 2020, 11:37:06 AM
Picked up my red pepper from the Tuner yesterday.  The build came out great its 163 HP and 167 Torque, posted dyno run in M8 section.

Hope the roads dry out today so I can go ride it now that it has been properly tuned.
What size motor did you put in it? 128 or 131? Which cam and pipe? Who was your builder?

Sent from my SM-N960U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: sjpi1954 on March 25, 2020, 01:25:34 PM
Like the title says, what did you do to or on your CVO today?

Never once had to adjust/tighten my 3 previous Dynas' Jiffy Stands.  My luck ran out with my 2012 CVO Ultra Classic.  However, a VERY easy cure for what ails that loose Jiffy Stand IMHO.  1/2" Socket on the Retention Bolt (Locking Clamp is undamaged) and OMG...Loose would be an understatement.  Tightened and then Torqued to 50ft/lbs.

Night and Day difference on the Bike now.  Turn the wheel left to right, lock to lock, and NO tip over threat anymore.

Better late than never.  Whole process took 5-7 minutes.

JP
Title: Re: What did you do to or on your CVO today?
Post by: PBSTN on March 25, 2020, 09:19:44 PM
Full service today. Ready to roll.
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on March 25, 2020, 10:22:29 PM
Picked up my red pepper from the Tuner yesterday.  The build came out great its 163 HP and 167 Torque, posted dyno run in M8 section.

Hope the roads dry out today so I can go ride it now that it has been properly tuned.
Wow Dave, thats fricken awesome!!
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on March 26, 2020, 06:48:35 AM
What size motor did you put in it? 128 or 131? Which cam and pipe? Who was your builder?

Sent from my SM-N960U using Tapatalk

Builder was my very good friend an I. 
130 inch motor
CR-482 cam
Fullsac MX

As I said in my post, all the details on the build and the dyno run are in M8 section.
https://www.cvoharley.com/smf/index.php?topic=120673.0 (https://www.cvoharley.com/smf/index.php?topic=120673.0)
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on March 26, 2020, 06:52:56 AM
Well, I put 195 miles on the Red Pepper build yesterday.  Wow, rides great.  Spent most the ride in the foothills of the Smoky Mountains riding nice hilly twisty roads.  Bike is very well mannered and easy to ride.  It pulls from most any RPM so its easy to ride the curves.  75 mph roll on power is Fantastic, no need to down shift to pass a line of cars.  I will be riding her to the DR office today and hopefully a nice two or three hour ride after.  Very happy with this build.

Title: Re: What did you do to or on your CVO today?bu
Post by: Cvostu on March 26, 2020, 06:14:56 PM
Dave. Those numbers are incredible.    I'm really happy for you.  Enjoy your new ride.     It must be amazing. 👌. Stuart.
Title: Re: What did you do to or on your CVO today?
Post by: Robmay on March 26, 2020, 06:22:13 PM
Incredible numbers Dave! How’s the “drive-ability” as far as in town and freeway riding? Any harshness?


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Rstarnes67 on March 26, 2020, 06:27:15 PM
I replaced the failed water pump on my 15 CVO Limited. Pretty straight forward replacement.  Took the old one apart to see what failed and a connector had broken loose. (https://uploads.tapatalk-cdn.com/20200326/d499df9b1adf83e7225288adfd907014.jpg)


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on March 27, 2020, 07:16:14 AM
Incredible numbers Dave! How’s the “drive-ability” as far as in town and freeway riding? Any harshness?


Rob,

The bike is very smooth, throttle is very linear.  Rides like a stock bike in town with more power.  Yesterday I put 130 more miles on it, and first time on interstate for 20 miles.  Rides great at 75 mph, load of roll on power.  I have not yet found any issues with ride-ability, but only have 325 miles on it since the tune.  I honestly think it will be better and easier to ride in all situations than it was stock.

My 13 King is that way, way easier and better to ride then stock.  Same people involved in the build of my 13 King as this bike. 

I Plan to ride some more today to keep practicing social distancing, and because it will be almost 80 hear in east TN.
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on March 27, 2020, 08:43:45 AM
Nice build, Dave.  Great numbers and those guys up around Morristown sure can build/tune a Harley motor.  Have they gotten into Indians yet?  I'm guessing you plan to keep the '19 for a while longer now?

Yep, wonderful day yesterday and while it may be a bit more cloudy today, temps should be great.  You may have to dodge a few rain drops but with that motor, you could just outrun them... :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Phreakyz on March 27, 2020, 12:10:23 PM
I replaced the failed water pump on my 15 CVO Limited. Pretty straight forward replacement.  Took the old one apart to see what failed and a connector had broken loose. (https://uploads.tapatalk-cdn.com/20200326/d499df9b1adf83e7225288adfd907014.jpg)

Can you solder it up and put it back together for a spare?
Title: Re: What did you do to or on your CVO today?
Post by: RivRaptor on March 27, 2020, 01:08:36 PM
Use some solder braid to get all of that old low grade crappy solder off the joint, then a dab of Flux and some high grade silver solder and better than new!  The crappy solder does not hold up well under higher temp load areas.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on March 28, 2020, 07:11:49 AM
Howard,

Was a nice day, never got sprinkled on.  Rode TN 30 out to Fall Creek Falls, then meandered up to US 70 for the ride home.  Was going to stop at Ozone Falls but I have never seen so many people their in my life, to packed to practice social distancing.  Ended up with a nice 218 mile ride.


Plan to ride today with some friends and do a brown bag Lunch. This way we can practice more social distancing.  Carry hand sanitizer in saddle bag for after pumping gas or anything else I may touch.
Title: Re: What did you do to or on your CVO today?
Post by: Robmay on March 28, 2020, 08:15:58 AM
Rob,

The bike is very smooth, throttle is very linear.  Rides like a stock bike in town with more power........

Sounds perfect. Thanks Dave!


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on March 30, 2020, 07:12:54 AM
Had a nice ride Saturday up the Charahola Skyway, then 68 over to Ductown, and 64 along the Ocoee and back up 315 to 39 and home.

Planned to ride yesterday but the bad storms left a big tree across my drive way and two other that were topped.  Live on a long dead end, need a chain saw to get out my road.  Now power from 0500 until 1900.

Today I have to change the oil in Rep Pepper.  Then Ill ride her to the DR, but not much more as I have lots of yard clean up to go
Title: Re: What did you do to or on your CVO today?
Post by: glinkmeyer on March 30, 2020, 11:41:35 AM
Had a nice ride Saturday up the Charahola Skyway, then 68 over to Ductown, and 64 along the Ocoee and back up 315 to 39 and home.

Planned to ride yesterday but the bad storms left a big tree across my drive way and two other that were topped.  Live on a long dead end, need a chain saw to get out my road.  Now power from 0500 until 1900.

Today I have to change the oil in Rep Pepper.  Then Ill ride her to the DR, but not much more as I have lots of yard clean up to go
Someone posted on Facebook and no one ever lies on Facebook LOL that the Charahola Skyway is closed at the NC boarder? Just wandering if it is closed. Also at Deals gap at the NC boarder.


Sent from my iPad using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: SIKBIRD on March 30, 2020, 10:29:17 PM
Was hoping it was a hoax but looks like it may be true

https://www.google.com/amp/s/www.wate.com/news/cherohala-skyway-between-tellico-plains-robbinsville-closed-as-part-of-graham-county-state-of-emergency-declaration/amp/
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on March 31, 2020, 08:16:14 AM
Its not a hoax.  Its is true.  It on local news, also know people how have seen the blocks in person.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on April 02, 2020, 07:19:30 AM
Plan to ride to the DR office today, then to the Grocery store and maybe if all goes as planned a little 80 mile loop or so.
Title: Re: What did you do to or on your CVO today?
Post by: joe98 on April 02, 2020, 09:24:59 AM
Howard,

Was a nice day, never got sprinkled on.  Rode TN 30 out to Fall Creek Falls, then meandered up to US 70 for the ride home.  Was going to stop at Ozone Falls but I have never seen so many people their in my life, to packed to practice social distancing.  Ended up with a nice 218 mile ride.


Plan to ride today with some friends and do a brown bag Lunch. This way we can practice more social distancing.  Carry hand sanitizer in saddle bag for after pumping gas or anything else I may touch.

Bike is lookin great Dave !  Nice that you can get out and enjoy the new build.  Also, happy to see that you are practicing the " Social Distancing " and being responsible.  It's sad to see that many people aren't getting the message.
Take care,
Ride safe...

Joe :)
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on April 03, 2020, 07:51:43 AM
Well two of us had a brown-bag lunch ride planned for today.  Take a lunch and drink, ride 100 miles or so, have a nice picnic lunch then ride another 150 miles.  Good way to get out, and still stay 10 feet or more apart.  However our Governor put a stop to that yesterday afternoon with a stay home order.

We can only go out for essentials.  Guess I could call in a prescription 100 miles or so away and go get it on the bike....
Title: Re: What did you do to or on your CVO today?
Post by: AJDR^ on April 03, 2020, 01:07:16 PM
Well.... we needed a Easter Ham, sooooo..... jumped on the bike and went to the store - of course it was the one that was 78 miles away one way vs the one 4 miles away.  Got the ham and went for a nice long ride back the scenic way. It was great to get out. No one has ever said you HAVE TO go to the nearest grocery store that I know of....
Title: Re: What did you do to or on your CVO today?
Post by: glinkmeyer on April 03, 2020, 06:51:15 PM
We have a stay at home order in Ohio also only allowed out for essential needs. Our governor said it was okay to take a bike ride so I did a 150 mile bike ride in Ohio today.


Sent from my iPad using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on April 03, 2020, 06:53:45 PM
Good for you. I want to try that tomorrow 👌. Stuart.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on April 03, 2020, 07:12:47 PM
We have a stay at home order in Ohio also only allowed out for essential needs. Our governor said it was okay to take a bike ride so I did a 150 mile bike ride in Ohio today.


Sent from my iPad using Tapatalk
It will only last a short while longer I'm sure. These morons that are taking advantage of the "go for a walk and enjoy the parks" are going out in hoards. Some places look like lines at an amusement park the trails are so packed.
Title: Re: What did you do to or on your CVO today?
Post by: glinkmeyer on April 03, 2020, 07:44:52 PM
Yes the parks are crowded here also. What gets me is places like Cosco are only allowing so many people in the store at a time but they are lined up outside next to each other and not 6 feet apart. Don’t know what they are thinking.


Sent from my iPad using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Robmay on April 03, 2020, 08:07:52 PM
And in Florida it’s okay to attend church now AFTER the governor “shut us down” (or whatever you want to call it) but restaurants remained closed other than take out or delivery and I can’t have a meeting with my company because there are more than 10 people.


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on April 04, 2020, 07:15:25 AM
Well I have learned with the help of a Friend our Stay At Home order does allow for motorcycle rides, groups of 10 or less.  Must follow CDC social distancing guide lines.  So a few of us plan to go for a ride today and have a bag lunch.   
Title: Re: What did you do to or on your CVO today?
Post by: timo482 on April 04, 2020, 05:55:56 PM
there seem to be a lot of church groups insisting on big meetings.. all the early cases in korea were from a church, 70 folks from one church seriously ill,  two funerals led to dozens of cases and a few more funerals.  "xxxx deity will protect me"... there is a old joke about the guy on the roof in a flood, refused the boat, refused the helicopter. gets to heaven and asks why he was not saved. i sent a boat, i sent a helicopter what more could i do?.   folks need to stay 6 ft apart, wash hands, don't touch stuff and then touch face.   its simple.  bike ride, zero problem except at the gas station. ill have mine together today, ride tomorrow afternoon when its 60....
Title: Re: What did you do to or on your CVO today?
Post by: Robmay on April 04, 2020, 06:16:18 PM



Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on April 05, 2020, 04:21:47 PM
Someone posted on Facebook and no one ever lies on Facebook LOL that the Charahola Skyway is closed at the NC boarder? Just wandering if it is closed. Also at Deals gap at the NC boarder.


Sent from my iPad using Tapatalk
129 is not blocked at the TN/NC state line so you can stop at Deal's Gap. It is open on 129 up to Meadow Branch Road (Tapoco Lodge) and 28 is open to the Pit Stop (Fontana Village).

Sent from my SM-N975U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: TimP on April 05, 2020, 08:05:58 PM
I installed a H-D fan assisted oil cooler, CD Pro Beam, ES Vent Screens, Ciro Fang Headlight Bezels and their Highway Pegs on my 2019 CVO RG. Been procrastinating for a while, felt good to get it done. Now thinking about Fullsac 2.25 cores next.
Stay healthy
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on April 05, 2020, 11:10:49 PM
left very early to do about a 300 mile ride and was feeling very guilty when all parks/campgrounds/national trails were closed and blocked off and roads were empty. about 9AM I started seeing other bikes on the road until by late morning bikes and cars all over. One thing I didnt think about was there was no bathroom available anywhere. the sign "dead end" took on a whole new meaning..
Bike ran great and certainly didnt see any cops anywhere so got to have a bit of "fun" when I got way out in BFE--
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on April 06, 2020, 07:37:20 AM
I installed a H-D fan assisted oil cooler, CD Pro Beam, ES Vent Screens, Ciro Fang Headlight Bezels and their Highway Pegs on my 2019 CVO RG. Been procrastinating for a while, felt good to get it done. Now thinking about Fullsac 2.25 cores next.
Stay healthy

Do you have the H-D part number for the fan assisted oil cooler that fits the 19 CVO RG?  How hard was the instal?  I am sure the fang had to come off completely to install it. 

I have the fullsac headpipe and 2.25 cores on both my 13 CVO King and my 19 CVO RG.  Very good choice.

Hope to ride to the DR's office today, and maybe a short ride after.
Title: Re: What did you do to or on your CVO today?
Post by: Phreakyz on April 06, 2020, 07:47:23 AM
Do you have the H-D part number for the fan assisted oil cooler that fits the 19 CVO RG?  How hard was the instal?  I am sure the fang had to come off completely to install it. 


https://mstore.harley-davidson.com/store/fan-assisted-oil-cooler-kit

I've had this on my wish list but have not pulled the trigger yet.   I have not installed one on a CVO but I have installed the standard oil cooler on a Road Glide Special for my Son In Law and it was VERY EASY.   I noted at the time that the harness for the fan is already there and just plugged off.    Only difference might be dealing with the fang but I think that the lower sections are pretty easy to remove.
Title: Re: What did you do to or on your CVO today?
Post by: glinkmeyer on April 06, 2020, 10:23:45 AM
129 is not blocked at the TN/NC state line so you can stop at Deal's Gap. It is open on 129 up to Meadow Branch Road (Tapoco Lodge) and 28 is open to the Pit Stop (Fontana Village).

Sent from my SM-N975U using Tapatalk
Thanks for the information, is 129 closed just passed the Lodge, google maps shows it is closed there until late June?


Sent from my iPad using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: TimP on April 06, 2020, 10:48:40 AM
"Do you have the H-D part number for the fan assisted oil cooler that fits the 19 CVO RG?  How hard was the instal?  I am sure the fang had to come off completely to install it."

Compared to what you have done to your bike Dave its a piece of cake! I have been following your build and I am very impressed. Not sure I am ready to go there yet but thinking about it.

Not sure if you could remove the chin spoiler without removing the side fairing spoiler. For me I needed to remove the outer fairing so that came off first then the fang spoiler then the chin spoiler. All the stock plumbing is used with the exception of a couple of hose clamps. There are two T27 screws holding the oil cooler in place. The one on the right side requires a tight access drive wrench to remove. I bought the fan assisted oil cooler from from Surdyke for $271.00. The part # is 62700204.

Did you have Fullsac's power cores on without their headpipe. If so how did they sound. Did you use their Techmat Blankets as well. 
Title: Re: What did you do to or on your CVO today?
Post by: AJDR^ on April 06, 2020, 03:00:09 PM
Dave - putting on the fan assist oil cooler is pretty straight forward. Hardest part I thought was dealing with the fang pieces parts and breaking the contact seal between the hoses and the pipes on the cooler. I used a real tiny screw driver inserted between the two to break that seal. Set apart some me-time in the garage, put it on the lift and I didnt care how much time it took. I would make a terrible paid mechanic because I take too much time to do things, but it is good therapy and I enjoy doing it. Works great. You do have to get it activated at a dealer though. You also then have a spare oil cooler in case a rock takes one out - dont know why they dont come with a protective metal screen since it is in the danger zone behind the front wheel
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on April 06, 2020, 06:34:11 PM
  i change out the lifters, S&Ss came out... they looked great. put Johnsons in this time, so good to go till it hits 62k ?? now im going to order a set commander 3s  then ride it like a rental.... and maybe give it a bath  :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: Joel on April 06, 2020, 08:07:41 PM
I installed the Bushtec trailer hitch today and hooked up the trailer.
Going back down to the shop in the morning to install the wire harness,  than chase the front fender down the street to see how it pulls.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on April 07, 2020, 07:59:27 AM

https://mstore.harley-davidson.com/store/fan-assisted-oil-cooler-kit

I've had this on my wish list but have not pulled the trigger yet.   I have not installed one on a CVO but I have installed the standard oil cooler on a Road Glide Special for my Son In Law and it was VERY EASY.   I noted at the time that the harness for the fan is already there and just plugged off.    Only difference might be dealing with the fang but I think that the lower sections are pretty easy to remove.

Thanks for the part number.  Yes, I know the plug is there, you just have to toggle to fan to on in the bike software.  Fang is a difficult to remove and a bigger pain to get back on.

"Do you have the H-D part number for the fan assisted oil cooler that fits the 19 CVO RG?  How hard was the instal?  I am sure the fang had to come off completely to install it."

Compared to what you have done to your bike Dave its a piece of cake! I have been following your build and I am very impressed. Not sure I am ready to go there yet but thinking about it.

Not sure if you could remove the chin spoiler without removing the side fairing spoiler. For me I needed to remove the outer fairing so that came off first then the fang spoiler then the chin spoiler. All the stock plumbing is used with the exception of a couple of hose clamps. There are two T27 screws holding the oil cooler in place. The one on the right side requires a tight access drive wrench to remove. I bought the fan assisted oil cooler from from Surdyke for $271.00. The part # is 62700204.

Did you have Fullsac's power cores on without their headpipe. If so how did they sound. Did you use their Techmat Blankets as well. 

Okay on removing the fang, sure do not want to do it again but I am sure I will need the oil cooler.  Fan can be removed with out removing any of the fairing, but you start at fairing and work down.

Yes I have used the power cores, 2.25 both with out his head pipe and with his head pipe.  The sound pretty good on the stock head pipe, not to loud.  Nice at cruise but when you crack the throttle they sound nice.  Yes I use the tech mat and screens to hold it in place, I think it sounds better.
Title: Re: What did you do to or on your CVO today?
Post by: iski on April 08, 2020, 01:07:25 PM
Took a 2 hour 100 mile ride that was essential to get donuts.
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on April 08, 2020, 09:35:17 PM
Sounds good to me 👍Stuart
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on April 09, 2020, 07:07:30 AM
I put 65 miles on the 13 CVO King, first time I have rode it since I finished the build on the 19 CVO.  The King still has plenty of power with its build and is a blast to ride.

Today I'll hopefully ride the CVO RG for a couple essential trips if it quits raining.  I need to wash it also.
Title: Re: What did you do to or on your CVO today?
Post by: SIKBIRD on April 09, 2020, 10:13:58 PM
Nothing...but did a 5,000 mile service on my dad’s 2003 Road King Classic, getting it ready for our annual trip to the Smokies (if we can still go by mid-May). Took it for a 25 mile hot-lap, you know “just to make sure it’s good-to-go.” He bought it new in 03 and it’s an absolute cream puff, a real joy to ride!  He’s 71 now and still super-pumped about our annual ride! Sadly, he mentioned to me that this was likely my last time to service it for him, that next time it’ll likely be mine.  I hope he’s wrong and puts another 35,000 miles on it!
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on April 10, 2020, 06:44:25 AM
I put 65 miles on the 13 CVO King, first time I have rode it since I finished the build on the 19 CVO.  The King still has plenty of power with its build and is a blast to ride.

Today I'll hopefully ride the CVO RG for a couple essential trips if it quits raining.  I need to wash it also.

I got both bikes washed yesterday.  Then I rode the CVO RG to DR and other needs for a total of 104 miles.

Today going to Ride again with a few friends and practice social distancing with a picnic lunch.
Title: Re: What did you do to or on your CVO today?
Post by: iski on April 10, 2020, 07:13:55 AM
Roads are not busy, gas is cheap, weather is great.  After the rain clears this morning will ride for a couple of hours or so. 

Riding mostly favorite local roads & tried a few new ones but so far they have been dead ends or turned into rough rutted messes.  It's all good, wondered where some of them went now I know.
Title: Re: What did you do to or on your CVO today?
Post by: KGB on April 10, 2020, 11:17:34 AM
Went for a ride the other day, stopped for gas, station was closed, for about 40 years!(https://uploads.tapatalk-cdn.com/20200410/efd4343e2f930d8ed221976d353751e9.jpg)


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: glinkmeyer on April 10, 2020, 12:55:45 PM
Went for a ride the other day, stopped for gas, station was closed, for about 40 years!(https://uploads.tapatalk-cdn.com/20200410/efd4343e2f930d8ed221976d353751e9.jpg)


Sent from my iPhone using Tapatalk
Not sure why anyone would stop for gas at a station that’s been closed for 40 years, maybe dementia, hope you didn’t have to walk far for gas. LOL


Sent from my iPad using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: KGB on April 10, 2020, 02:54:22 PM
Not sure why anyone would stop for gas at a station that’s been closed for 40 years, maybe dementia, hope you didn’t have to walk far for gas. LOL


Sent from my iPad using Tapatalk

That sounds like something Clay would say ;)
Title: Re: What did you do to or on your CVO today?
Post by: bgdv1 on April 10, 2020, 07:34:51 PM
Did service on both bikes and completed the external breather setups today on both bikes. Now for it to warm up again and the local road department was finally around sweeping the antiskid off the roads it'll be time to ride.
Title: Re: What did you do to or on your CVO today?
Post by: 1320str8_liner on April 10, 2020, 11:37:01 PM
Changed stock mufflers to the fullsac power core baffles


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on April 11, 2020, 07:11:45 AM
Ended up riding 258 miles on the CVO RG yesterday with 9 friends, so following social distancing rules.  Nice picnic lunch.  Got home, and realized I will not be riding the RG again until it gets new rubber in the back, there is no tread at all left.

I will be ordering a new Dunlop American elite for the CVO RG today.

I also plan to get the CVO King out and take her for a nice ride today. 
Title: Re: What did you do to or on your CVO today?
Post by: Robmay on April 11, 2020, 08:13:18 AM
How many miles did you get on that rear tire Dave?


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on April 12, 2020, 07:22:10 AM
How many miles did you get on that rear tire Dave?

The factory rear I got 12,500 miles out of.  It was howling in the curves bad by 6K miles, and you could see the cupping.  This is the second rear, and it is an American Elite.  I got 13K out of it, it is bald from chicken strip to chicken strip which are very small chicken strips.  This tire never ever howled in the curves and I never saw cupping.  Last 2K miles on this tire were after I built the motor.

I thought I would get a little longer wear out of the American Elite.  Was told I need to run 42 in the rear, so I will try that this time, as I ran 40 in the rear this time.

Raining today so no riding today.  Dang.
Title: Re: What did you do to or on your CVO today?
Post by: LuvGun on April 12, 2020, 08:53:31 AM
Put on new bars
Title: Re: What did you do to or on your CVO today?
Post by: glinkmeyer on April 12, 2020, 09:54:38 AM
The factory rear I got 12,500 miles out of.  It was howling in the curves bad by 6K miles, and you could see the cupping.  This is the second rear, and it is an American Elite.  I got 13K out of it, it is bald from chicken strip to chicken strip which are very small chicken strips.  This tire never ever howled in the curves and I never saw cupping.  Last 2K miles on this tire were after I built the motor.

I thought I would get a little longer wear out of the American Elite.  Was told I need to run 42 in the rear, so I will try that this time, as I ran 40 in the rear this time.

Raining today so no riding today.  Dang.
Dave, it’s good to hear you never had the cupping problem with the American Elite, I will try that next time. I have had the same cupping problem on my 13, 16, and now my 19 CVO Ultras. I have found out over the years and miles that if I run 40lbs. in the front and 50lbs in the rear cold pressure they cup a whole lot less. Before everyone jumps my butt about over inflated rear tire I’m not telling anyone to do that it just works for me. On my 13 I only got around 13,000 miles on the rear tire, since then I have had a BSR almost all of the time and now am getting around 23,000 miles on a rear tire. I guess the extra 110lbs keeps the tire contact to the road so less skipping at speed. I did talk to a Dunlop rep at Daytona and he said Harley’s trad design is different then the Elite and maybe that is why the cup.


Sent from my iPad using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: PBSTN on April 12, 2020, 01:45:06 PM
Changed the fork oil. And some good cleaning.
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on April 12, 2020, 07:59:53 PM
Luvgun. What bars did you go with?   They look great Stuart.
Title: Re: What did you do to or on your CVO today?
Post by: Phreakyz on April 12, 2020, 08:46:58 PM
Put on new bars
They look good!
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on April 13, 2020, 06:31:52 AM
Put on new bars
They look good!

X2  Looks good
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on April 13, 2020, 11:33:12 AM
Luvgun. What bars did you go with?   They look great Stuart.

Yeah, they look similar to Yaffee Monkey Bars but possibly 1 1/2" diameter, can't tell if they're a 12 or 14" height.

Great looking setup though, can you share some info?

Title: Re: What did you do to or on your CVO today?
Post by: geezerglide on April 13, 2020, 05:58:48 PM
 Added switch pack for passing lamps, fairly easy job as the wiring harness already behind the panel.
Title: Re: What did you do to or on your CVO today?
Post by: geezerglide on April 13, 2020, 06:12:50 PM
beside the switch pack. I installed the passing lamps which the CVO Street Glide does not have and they worked hurrah.

Also installed detachable hardware for a chopped tour pak and mounted the painted Atomic Red tour Pak, great paint match by a local painter.

Also Wild One Chubby WO578 10' Bars plus Heat Demon heated grips.

Revo rear 13" SHOCKS and a friend of mine installed the Revo Legend front shocks. To much snow for a test ride.

Tried adding pics, however files to big will resize.
Title: Re: What did you do to or on your CVO today?
Post by: LuvGun on April 13, 2020, 06:30:14 PM
Luvgun. What bars did you go with?   They look great Stuart.

Fat Baggers Inc. 12" EZ Install bars, 1.5" diam
Title: Re: What did you do to or on your CVO today?
Post by: LuvGun on April 13, 2020, 06:30:41 PM
They look good!

Thanks
Title: Re: What did you do to or on your CVO today?
Post by: LuvGun on April 13, 2020, 06:31:41 PM
Yeah, they look similar to Yaffee Monkey Bars but possibly 1 1/2" diameter, can't tell if they're a 12 or 14" height.

Great looking setup though, can you share some info?

Fat Baggers Inc. 12" EZ Install bars, 1.5" diam
Title: Re: What did you do to or on your CVO today?
Post by: LuvGun on April 13, 2020, 06:32:11 PM
X2  Looks good

Thanks
Title: Re: What did you do to or on your CVO today?
Post by: geezerglide on April 13, 2020, 06:34:26 PM
Pic 10" Chubby with Heat Demons
Title: Re: What did you do to or on your CVO today?
Post by: geezerglide on April 13, 2020, 06:37:26 PM
Tour Pak side View
Title: Re: What did you do to or on your CVO today?
Post by: geezerglide on April 13, 2020, 06:42:13 PM
Original lamps
Title: Re: What did you do to or on your CVO today?
Post by: geezerglide on April 13, 2020, 06:44:03 PM
With new passing lamps
Title: Re: What did you do to or on your CVO today?
Post by: Aussie on April 15, 2020, 04:36:00 AM
Scheduled service and full detail.
A copy of my service sheet is attached, one thing I need to add is check for error codes. What do you use....
Title: Re: What did you do to or on your CVO today?
Post by: Aussie on April 15, 2020, 04:41:59 AM
Also Re-stocked my supplies.
Title: Re: What did you do to or on your CVO today?
Post by: Phreakyz on April 15, 2020, 05:59:12 AM
Also Re-stocked my supplies.
Nice!  Looks like a store display!
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on April 15, 2020, 07:58:04 AM
Hope to get out for a short ride today to get some necessities. 
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on April 15, 2020, 11:04:39 AM
Me too Dave, my biggest necessity is mental health and I'm planning on an extra large dose today!  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: jachd17 on April 15, 2020, 09:54:55 PM
Also Re-stocked my supplies.

What the hell is Red Bitter??
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on April 16, 2020, 06:57:42 AM
Me too Dave, my biggest necessity is mental health and I'm planning on an extra large dose today!  :2vrolijk_21:

Rode the CVO King 136 miles yesterday and visited along the river with a friend for a cigar while maintaining social distance.

Today we have about 8 bikes meeting up for a ride down some good twisty roads, then a picnic lunch overlooking a lake, then ride some more after.  Again small group under the max of ten and we will stay more than 6 feet apart.

I agree this is to keep my mental health in good shape.

Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on April 16, 2020, 08:08:39 AM
Sounds like a fun day ahead. Enjoy your day.  Stuart. 👌
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on April 17, 2020, 07:40:16 AM
Sounds like a fun day ahead. Enjoy your day.  Stuart. 👌

We had seven bikes for the ride yesterday, a beautiful day and great ride of all twisty curvy roads.  I put 242 miles on the CVO King.

Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on April 17, 2020, 07:41:36 AM
Picnic lunch stop at Parksville lake overlook.

Title: Re: What did you do to or on your CVO today?
Post by: BigLock on April 17, 2020, 06:50:21 PM
Just did a little 200 miles ride today.
Title: Re: What did you do to or on your CVO today?
Post by: vmotorman on April 17, 2020, 08:57:06 PM
Searched & searched & searched so more, but no luck on 110 derby & timing covers for my ride!
Title: Re: What did you do to or on your CVO today?
Post by: kevin_n on April 18, 2020, 09:34:57 PM
Uncovered it and changes the fluids, also installed custom dynamics pro beam tail lights. Kathy's bike got fresh fluids also. Now just need to weather to break and can start riding to work since everything else is still closed.
Title: Re: What did you do to or on your CVO today?
Post by: Mofo67 on April 19, 2020, 05:26:19 AM
Picked it up from the dealer with the newly installed 131. Rode about 115 miles and planning for more miles today. 131 performed really good, even though I’m trying to keep the RPMs low for the first 500 miles.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on April 19, 2020, 07:11:26 AM
Well I noticed the back end get loose on a couple down shifts in hard curves last ride on the CVO RG, so when I got home I ordered a new American Elite to replace the one on the bike.  So yesterday with the help of a friend we got the new one installed.

Old tire...  I think I got all the life out of it, including both sides....

Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on April 19, 2020, 11:23:35 AM
C'mon Dave, what tire is it and how many miles at that point were on said tire? Talk about cuttin it close!
Title: Re: What did you do to or on your CVO today?
Post by: Robmay on April 19, 2020, 02:38:17 PM
C'mon Dave, what tire is it and how many miles at that point were on said tire? Talk about cuttin it close!

American Elite 13k I believe.


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Leadwolf on April 19, 2020, 03:08:37 PM
Put on new pipes and changed tires. (https://uploads.tapatalk-cdn.com/20200419/0024f95e673b0a98f3ea862ccc593a9a.jpg)


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on April 19, 2020, 05:55:49 PM
Cmon Dave.    Not gooood to ride on a tire like that.  I worry about you buddy.     Stuart.  😨
Title: Re: What did you do to or on your CVO today?
Post by: HOGMIKE on April 19, 2020, 06:45:32 PM
Cmon Dave.    Not gooood to ride on a tire like that.  I worry about you buddy.     Stuart.  😨

A lot depends on the tire, bike, rider and HOW hard it is ridden.
This tire had 4000 miles on it,
 8)
Title: Re: What did you do to or on your CVO today?
Post by: HOGMIKE on April 19, 2020, 06:46:22 PM
Another
Sorry, probably the wrong place for this, but, safety first, right? :soapbox:
Title: What did you do to or on your CVO today?
Post by: Robmay on April 19, 2020, 06:57:22 PM
Burnouts? Over inflation?


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: HOGMIKE on April 19, 2020, 07:24:13 PM
Burnouts? Over inflation?


Sent from my iPhone using Tapatalk

None of the above, soft rubber, high horsepower, 2 up!
He went to a harder compound and we’ll see how that works out 💪
 8)
Title: Re: What did you do to or on your CVO today?
Post by: HOGMIKE on April 19, 2020, 07:25:58 PM
Just ordered a front tire for my 2019, got 18 k on the original tire but I’m switching to American Elites
130/60/19, strange size for a Harley
 8)
Title: Re: What did you do to or on your CVO today?
Post by: Robmay on April 19, 2020, 07:33:57 PM
None of the above, soft rubber, high horsepower, 2 up!
He went to a harder compound and we’ll see how that works out
 8)




Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: RebelScum on April 19, 2020, 10:29:46 PM
Hey there,
New to the group. I’m am in the beginning stages of purchasing a 2011 road glide ultra CVO. Bike is mint. 14k km’s on it. It is pretty much stock. 110 screamin eagle. I’m not so set on the tour pak setup and wondering how easy it is to delete said Pak.
Title: Re: What did you do to or on your CVO today?
Post by: HOGMIKE on April 19, 2020, 10:53:57 PM
Hey there,
New to the group. I’m am in the beginning stages of purchasing a 2011 road glide ultra CVO. Bike is mint. 14k km’s on it. It is pretty much stock. 110 screamin eagle. I’m not so set on the tour pak setup and wondering how easy it is to delete said Pak.

If you plan to remove the tour pack it’s 4 bolts and some wires. Problem is you end up with an ugly mounting rack with an amp mounted underneath IIRC.
It CAN be done but It will probably take some $$$ and some searching to get the rear looking good.
I deleted my tour pack on a similar 2010 bike years ago and it turned out nice. Just took some creative parts changing.
Good luck.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on April 20, 2020, 07:42:40 AM
C'mon Dave, what tire is it and how many miles at that point were on said tire? Talk about cuttin it close!

Donlop American elite was on it, and what I put back on, they don't cup near like the Junk that comes on the bike.  Wear is slightly better, cost is a lot less.

13K miles on the tire.  That was at 40psi, going up to 42 they say it will help tread life. 

Last 2k miles tread went very fast.  Was not even at wear bars then, looked like 3000 to 3500 miles left in it, boy was I wrong.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on April 20, 2020, 07:46:43 AM
Cmon Dave.    Not gooood to ride on a tire like that.  I worry about you buddy.     Stuart.  😨

I did a good tire inspection 2000 miles earlier.  Not on wear bars looked like 3000 miles plus left of tread.  It went fast.  Noticed is get squirrels on tow downshifts in curves.  Checked tire and first stop, dropped out of ride and went home.

I try to change them when just getting to wear bars.  They the most worn I have ever let a tire on a motorcycle get. 
Title: Re: What did you do to or on your CVO today?
Post by: HOGMIKE on April 20, 2020, 10:28:43 AM
Donlop American elite was on it, and what I put back on, they don't cup near like the Junk that comes on the bike.  Wear is slightly better, cost is a lot less.

13K miles on the tire.  That was at 40psi, going up to 42 they say it will help tread life. 

Last 2k miles tread went very fast.  Was not even at wear bars then, looked like 3000 to 3500 miles left in it, boy was I wrong.

I have found the same wear pattern on mine also.
Got a American Elite Front coming this week. The oem tires seem to wear a little different than the AE.
Mine always seem to “sing” when miles pile up. AE’s not so much, maybe the tread pattern or something?
I’ve been pretty satisfied with the AE over the years.
 8)
Title: Re: What did you do to or on your CVO today?
Post by: WRE4U on April 20, 2020, 11:15:53 AM
Quote
Donlop American elite was on it, and what I put back on, they don't cup near like the Junk that comes on the bike.  Wear is slightly better, cost is a lot less.

13K miles on the tire.  That was at 40psi, going up to 42 they say it will help tread life.

Last 2k miles tread went very fast.  Was not even at wear bars then, looked like 3000 to 3500 miles left in it, boy was I wrong.

I was averaging about 7500 miles on my OEM Dunlops, at 14500 miles (after 2 sets) I went to the Dunlop Elites on the advice of Terry at Beach Customs in Little River SC (Myrtle Beach).  Originally I thought 40lbs was too much, and after 5000 miles on them, they look and perform great.  I won't let them get to the point that Dave did, but 42 lbs seems like a lot?  It is a pretty stiff ride for me now, and soon will be looking at some suspension upgrades. 
Title: Re: What did you do to or on your CVO today?
Post by: OBB on April 20, 2020, 01:19:29 PM
Donlop American elite was on it, and what I put back on, they don't cup near like the Junk that comes on the bike.  Wear is slightly better, cost is a lot less.

13K miles on the tire.  That was at 40psi, going up to 42 they say it will help tread life. 

Last 2k miles tread went very fast.  Was not even at wear bars then, looked like 3000 to 3500 miles left in it, boy was I wrong.
Dave can you point me to your supplier for "a lot less". I tried a few weeks back for a bit and the ones for my FLTRUSE are $340(rear) which is more than the stock Dunlop. Dealer did give me 10% off the AE a month or so ago but they've always given me 20% off the stock Dunlop. Hoping this one is worth the extra money.

Sent from my boring Droid phone.

Title: Re: What did you do to or on your CVO today?
Post by: The 1 on April 20, 2020, 10:28:16 PM
OBB
rocky mountain atv and they fill out the rebate and send it in for you
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on April 20, 2020, 10:35:03 PM
just got a set of comander 3s in today... 253. rear 183. front from J&P  FYI
Title: Re: What did you do to or on your CVO today?
Post by: OBB on April 21, 2020, 06:11:44 AM
OBB
rocky mountain atv and they fill out the rebate and send it in for you
:2vrolijk_21: :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on April 21, 2020, 06:48:07 AM
Dave can you point me to your supplier for "a lot less". I tried a few weeks back for a bit and the ones for my FLTRUSE are $340(rear) which is more than the stock Dunlop. Dealer did give me 10% off the AE a month or so ago but they've always given me 20% off the stock Dunlop. Hoping this one is worth the extra money.

Sent from my boring Droid phone.

I used Dennis Kirk   Rear American Elite 180/55B-18 Blackwall Tire - 45131440   Part #: 544893      $238.26  Then a 5 dollar tire fee and tax, shipping free.  I had to fill out and send in the rebate. 
Title: Re: What did you do to or on your CVO today?
Post by: OBB on April 21, 2020, 12:24:17 PM
I used Dennis Kirk   Rear American Elite 180/55B-18 Blackwall Tire - 45131440   Part #: 544893      $238.26  Then a 5 dollar tire fee and tax, shipping free.  I had to fill out and send in the rebate.
Different size from mine. I'll have to look at their website again.

Sent from my boring Droid phone.

Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on April 22, 2020, 06:51:05 AM
Yesterday took a nice ride with a friend, up through Big South Fork National recreation area, a nice 262 mile loop.  New back tire works much better.

Plan to ride with another group of guys today.
Title: Re: What did you do to or on your CVO today?
Post by: iski on April 22, 2020, 08:50:31 AM
Took a long meandering ride that for us was essential to the local Harley shop that sold to a new owner last month to sign up for their new loyalty program.  Lots of changes, lots fewer employees & the ones that were still there were happy to be employed still.  Lots & lots of bikes & heard they were selling some.  This spring the weather has been outstanding, way better than usual.  If things were normal am guessing they would be having a much, much better sales year.  Biggest change was to combine the Service Dept. with the Parts Dept.

On the way home decided to take some little country lane roads I had not been on in a good while.  Meandered up into Georgia with No Particular Place To Go in mind.  Turned off on what used to be a nice little tree canopied curvy country road that intersects with another one just like it. Should have been about 20-30 miles of no traffic, farm houses with lots of trees & ponds & occasional tree canopies over meandering roads  After about 2-3 miles of loose asphalt, teeth jarring pot holes that were hit while missing bigger potholes, and tree roots under asphalt, I changed my mind & at the first opportunity changed roads.  South Jawjah roads appear to get repaired by a dart board method that must be decided by who got elected Road Commissioner in what area. Roads were still nice as to scenery but miserable as to riding. Ended up all good - a day riding is better than a day not riding.
Title: Re: What did you do to or on your CVO today?
Post by: iski on April 23, 2020, 02:34:48 PM
Today it rained - nothing.

Tomorrow a ride to the coast with friends for a take out dinner from a family seafood place that we will take to a nice little waterside park.
Title: Re: What did you do to or on your CVO today?
Post by: Bav on April 24, 2020, 12:24:54 PM
Wheeled it out of the garage. Started it up. Sat on it. Looked at it. Pushed it back in and hooked it up to a battery tender.

Beautiful weather all week in the UK. 66 degrees F this afternoon. Going to sit out in the garden with a beer now and dream of better days to come.

Stay safe and well everyone.


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: vmotorman on April 27, 2020, 11:23:35 PM
Hogworkz headlight & driving lights!  Holy smokes they’re BRIGHT!

Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on April 28, 2020, 06:30:57 AM
Picked up my rain sock for the extreme heavy breather yesterday.  I also ordered the fan assisted oil cooler for the Red Pepper.  Hope to get a short ride in after the dr visit this am.
Title: Re: What did you do to or on your CVO today?
Post by: Phreakyz on April 28, 2020, 07:20:22 AM
I just installed the fan assisted oil cooler on mine over the weekend.    Pretty easy job!   I had the dealer flash it for the fan when I had it in there for the Headlight issue.   After that it set a Check engine Light for Cooling Fan Circuit Open (DTC 1693) but other than that was fine.    Then when I installed the fan she was good to go.   
Title: Re: What did you do to or on your CVO today?
Post by: Phreakyz on April 28, 2020, 07:21:25 AM
2
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on April 29, 2020, 06:48:17 AM
Nice to hear it was an easy job.  Hopefully not long and mine will arrive for me to install.
Title: Re: What did you do to or on your CVO today?
Post by: Boatman on April 29, 2020, 11:20:05 AM
Nice to hear it was an easy job.  Hopefully not long and mine will arrive for me to install.

Sad but for $42k and a 117 motor should have came standard. 
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on April 29, 2020, 08:23:21 PM
Got the C3s and some galfer rotors on... front
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on April 29, 2020, 08:25:04 PM
And the rear.... this thing is meaty looking ...
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on April 30, 2020, 06:30:18 AM
Sad but for $42k and a 117 motor should have came standard.

Agree, or you should have at least been able to just buy the fan like you could for 18.  But no the fan that fits the 18 does not work with the 19. 
Title: Re: What did you do to or on your CVO today?
Post by: LuvGun on April 30, 2020, 08:14:19 AM
Sad but for $42k and a 117 motor should have came standard.

That's for sure
Title: Re: What did you do to or on your CVO today?
Post by: Unbalanced on April 30, 2020, 04:36:10 PM
The 15 got New Sneakers - Michelin Commander III front and rear, Ohlin Cartridges for the Front Shocks, push button start for the starter, Mounted the 595 Zumo, D&D Exhaust, Fairing Switches to support the Moto Lights (Chrome) on Calipers (Hopefully these will go on early next week).
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on April 30, 2020, 10:59:33 PM
I'd been waiting to start this project this project for awhile now.  Wanted a couple of completely uninterrupted days.  That didn't happen, or hasn't happened, or something.  Anyway, today finally really got in to it.  Hopefully back together tomorrow.

My old Road Glide.  The bike that is the single most reliable, don't leak, always runs, just don't mess with because you don't fix it if it ain't broken bike I've ever had.  For the first time since 2008 I'm messing with the engine.

Top end is off, the gear drive and Mackie cams are out and stuck tape all over the inside of the cam chest late this afternoon.
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on April 30, 2020, 11:00:16 PM
Then re-shaped a little metal....
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on April 30, 2020, 11:00:50 PM
Then cleaned up the mess....
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on April 30, 2020, 11:01:56 PM
Then, oh boy, the bigguns fit !!  :pineapple:

Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on April 30, 2020, 11:05:08 PM
Every time I use that little rotary cutter I'm pleasantly surprised by how clean a job it does.  Touched up the cutting bit before beginning today just to know it was sharp.  But the little bastard just does nice work.  I always emery paper the bottom lip of the lifter bores after using; just because I'm anal about it as much as anything.  The tool leaves nice clean edges though.  It would have been fine without my emery paper touch-ups.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on May 02, 2020, 06:48:44 AM
Yesterday another forum member led us on a great ride through the hils of east TN and a little bit of NC.  The ride was about 230 miles.  Nine bikes total, 5 road glides.  There were not two of any other model.  All said my wife and I rode a total of 345 miles yesterday.  I will be leading a club ride today of just over 200 miles.

Title: Re: What did you do to or on your CVO today?
Post by: OBB on May 02, 2020, 01:04:17 PM
Rode it to work. Just waiting for the looonnnggggg ride home in good weather.

Sent from my boring Droid phone.

Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on May 02, 2020, 02:14:04 PM
I had the Road King about 150 miles this morning.  FXR for about a 100 last night and probably ride it again this evening.  Not kidding when I say were it not for the bikes this lockdown chit would be much much worse to deal with.
Title: Re: What did you do to or on your CVO today?
Post by: iski on May 03, 2020, 12:12:59 AM
Yes.  Having a bike to ride these past few weeks has been a great way to clear the cobwebs.  Always the case but much more so lately because the cobwebs have cobwebs on some days.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on May 03, 2020, 06:43:51 AM
Bike has helped me keep sanity during the lock down.  You can sure tell TN is in Phase 1 of opening as there has been way more traffic Friday and Saturday than the last few weeks.  Fall Creek Falls State park was packed saturday not a parking spot, a week ago I was the only one there.

Great ride yesterday, another 307 mile put on the bike.
Title: Re: What did you do to or on your CVO today?
Post by: Phreakyz on May 03, 2020, 08:18:53 AM
Yesterday another forum member led us on a great ride through the hils of east TN and a little bit of NC.  The ride was about 230 miles.  Nine bikes total, 5 road glides.  There were not two of any other model.  All said my wife and I rode a total of 345 miles yesterday.  I will be leading a club ride today of just over 200 miles.
Awesome Pic of some beautiful bikes!
Title: Re: What did you do to or on your CVO today?
Post by: LuvGun on May 03, 2020, 11:30:37 AM
New seat

Title: Re: What did you do to or on your CVO today?
Post by: LuvGun on May 03, 2020, 11:31:25 AM
.
Title: Re: What did you do to or on your CVO today?
Post by: 08glide on May 04, 2020, 12:43:14 PM
rode 150'ish Sat with a few friends & then another 100ish on BRPKWY with wife's cuz, in from Columbus,Oh yesterday. her 59th BD. been great weather for riding.    :2vrolijk_21:      :orange:
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on May 04, 2020, 01:28:38 PM
Cool looking seat LUVGUN, who makes it?
Title: Re: What did you do to or on your CVO today?
Post by: LuvGun on May 04, 2020, 01:43:02 PM
Saddlemen SDC Pro series
Title: Re: What did you do to or on your CVO today?
Post by: iski on May 04, 2020, 02:21:14 PM
Took an extra long ride to a nursery instead of a 20 minute ride.

Not a baby nursery, a plant nursery. 
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on May 06, 2020, 06:23:45 AM
Plan to ride today with the group I rode with last week with another forum member and friend.  Should be around 200 miles up to Pickket state park for a picnic lunch. 
Title: Re: What did you do to or on your CVO today?
Post by: martys on May 06, 2020, 08:34:18 AM
I took all the winter covers off, checked the oil, and air in the tires, gave it a good spring cleaning and then went out for a nice cool one hour ride  :2vrolijk_21: :pepper: :pepper: :pepper:
Title: Re: What did you do to or on your CVO today?
Post by: longlast on May 07, 2020, 03:45:44 PM
Installing new brake pads  to front and rear and change the fluid.  I'll be stretching it out over a few days to keep myself occupied while were still on lockdown n
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on May 07, 2020, 07:45:09 PM
Had another 45 minutes loose this afternoon.  So put the cam plate assembly together for the Road Glide.  If Saturday stays unoccupied will be the new top end back on it then.  Keeping fingers crossed nothing bites me in the ass.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on May 09, 2020, 07:32:52 AM
I'm washing the Red Pepper this morning.  Then leading my club on a 200 mile ride through the hills of East TN and along the Ocoee river, going to be a cool but sunny day.
Title: Re: What did you do to or on your CVO today?
Post by: iski on May 09, 2020, 07:44:54 AM
Riding with a group to the coast for seafood, about 250 round trip.  Temps in the 60s-70s.  After that it's happy hour back here at another riding buddie's home.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on May 11, 2020, 06:34:48 AM
Riding over to Dr's visit this morning.  Then over to SMHD to have the 25K service done with 27K on the bike.  Also getting the new front rotors installed and the new speedometer.  This covid delayed my new rotor by 6K miles.  As they were ordered with 20,560 miles on the bike.  Sure will be nice to have good front rotors for about 7K miles.....
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on May 11, 2020, 01:09:13 PM
Got farther than this while messing around for a few hours last night.  Both sides off, both sides on, roller rockers installed in the supports, etc etc etc.  I just liked the side by side comparison.
Title: Re: What did you do to or on your CVO today?
Post by: Billy on May 11, 2020, 03:20:25 PM
That is so cool love the look Billy
Title: Re: What did you do to or on your CVO today?
Post by: iski on May 15, 2020, 02:08:15 AM
Rode to the lake to catch up with some riding buddies.  Had not seen most of them since early March.  Good times, good friends, icy cold beverages, and good food. 
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on May 15, 2020, 06:33:30 AM
Took a great ride with a couple of club brothers, 298 miles in the beauty of east TN and West NC.  We took the Cherohala Skyway from TN to NC, then got on 129 north to Deals Gap.  Had lunch, place was packed.  Then we took Moonshiner 28 towards Bryson city, and hoped on 19/74 through the Nantahala River gorger down to Mupphy and onto 64 along the Ocoee River, the 30 north to Reliance, really nice now that its been repaired.  Then 163 and Lamontville Road back to our start.  Started out in the 60's and was 79 when we finish. 
Title: Re: What did you do to or on your CVO today?
Post by: WRE4U on May 15, 2020, 09:08:31 AM
Quote
Had lunch, place was packed.  Then we took Moonshiner 28 towards Bryson city, and hoped on 19/74 through the Nantahala River gorger down to Mupphy and onto 64 along the Ocoee River, the 30 north to Reliance, really nice now that its been repaired.

I recently left Wilmington NC for Murphy for a little hill riding out that way....beautiful country!  The trip was a little over 480 miles (all back roads mostly through SC).  A day to relax and rest up after that 10 hour ride.  Spent a few days with my cuz and did some riding, spent some time at http://chevellerestaurants.com/ (http://chevellerestaurants.com/) ....great local sports bar and then rode most of those roads and routes Dave mentioned.  Between some bad gas and the plethora of crotch rockets, I was definitely out of my element!!  Now might be the perfect time to head back that way for a few days and get re-acquainted with the area.
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on May 15, 2020, 06:07:53 PM
Went for lill ride ... and trying to plan a trip in couple weeks away , might have to head out your way Dave , sounds like
Title: Re: What did you do to or on your CVO today?
Post by: OBB on May 15, 2020, 07:16:03 PM
Pulled fairing to fix a speaker wire and tidy up in there. Also replaced that rubber trim running down between the fairings. Put my heel shifter back on.

Sent from my boring Droid phone.

Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on May 16, 2020, 06:45:26 AM
I recently left Wilmington NC for Murphy for a little hill riding out that way....beautiful country!

then rode most of those roads and routes Dave mentioned.  Between some bad gas and the plethora of crotch rockets, I was definitely out of my element!!  Now might be the perfect time to head back that way for a few days and get re-acquainted with the area.

Area does have great riding.  That is why I never ride the dragon on a Friday, Saturday, Sunday or Monday, to many crotch rockets.  Not much to see on it anyway, many of the other roads are much better. 

Went for lill ride ... and trying to plan a trip in couple weeks away , might have to head out your way Dave , sounds like

Its a great area to ride.  Many very good roads in East TN, West N.C and North GA.  Lucky its my local rides for me.

Today will be leading a club ride with a Picnic lunch at Frozenhead State Park, then up the devils Triangle to Brushy Mountain Penitentiary for a tour, then we will continue on Devils Triangle.  Should be a nice day and fun ride.
Title: Re: What did you do to or on your CVO today?
Post by: iski on May 16, 2020, 07:52:40 AM
Riding on a 100 mile donut run with 3 other couples. 
Title: Re: What did you do to or on your CVO today?
Post by: SIKBIRD on May 19, 2020, 08:22:03 AM
Came up to the Smokies for a week of riding, weather was nice Sunday and most of yesterday but had to ride back to Pigeon Forge from Deals Gap in the rain and the rest of the week looks like a total washout. Ninth year of doing this trip and have always hit a little rain here and there but I have always expected that we were eventually going to have a week like this.

So far 2020 has been a horrible year (pandemic, losing loved ones, lost income, home repairs, and now this), trying to count my blessings and stay positive but I need a break from all the hits.  Praying for better days ahead.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on May 19, 2020, 10:30:17 AM
Been messing with child #2 since I brought it home last Thursday. Have had the fairing off twice to fix minor things. I forgot how much fun putting this fairing back on but after cleaning up some wiring and getting it out of the way, I'm back down to 3-4 tries to get it hung on the hooks. I did get a chance to ride it to work last Saturday and then get a few miles on it with my brother after work. Title work is done but no plates yet. Sheriff said it's okay as long as I have my title receipt with me. BMV doesn't open back up until the 26th so I made my own plate.  Still needs some TLC but it'll be in top shape as time allows.

 (https://uploads.tapatalk-cdn.com/20200519/0b586bd062ad71d4e2edb93979519316.jpg)

(https://uploads.tapatalk-cdn.com/20200519/44efd6551ec75c98a898f448af6041ad.jpg)

Sent from my boring Droid phone.

Title: Re: What did you do to or on your CVO today?
Post by: Blue666s on May 19, 2020, 01:32:18 PM
Been messing with child #2 since I brought it home last Thursday. Have had the fairing off twice to fix minor things. I forgot how much fun putting this fairing back on but after cleaning up some wiring and getting it out of the way, I'm back down to 3-4 tries to get it hung on the hooks. I did get a chance to ride it to work last Saturday and then get a few miles on it with my brother after work. Title work is done but no plates yet. Sheriff said it's okay as long as I have my title receipt with me. BMV doesn't open back up until the 26th so I made my own plate.  Still needs some TLC but it'll be in top shape as time allows. (https://uploads.tapatalk-cdn.com/20200519/0b586bd062ad71d4e2edb93979519316.jpg)(https://uploads.tapatalk-cdn.com/20200519/44efd6551ec75c98a898f448af6041ad.jpg)

Sent from my boring Droid phone.

Beautiful bike!  Love that blue!  Congrats! 
Title: Re: What did you do to or on your CVO today?
Post by: KGB on May 19, 2020, 04:30:56 PM
Been messing with child #2 since I brought it home last Thursday. Have had the fairing off twice to fix minor things. I forgot how much fun putting this fairing back on but after cleaning up some wiring and getting it out of the way, I'm back down to 3-4 tries to get it hung on the hooks. I did get a chance to ride it to work last Saturday and then get a few miles on it with my brother after work. Title work is done but no plates yet. Sheriff said it's okay as long as I have my title receipt with me. BMV doesn't open back up until the 26th so I made my own plate.  Still needs some TLC but it'll be in top shape as time allows. (https://uploads.tapatalk-cdn.com/20200519/0b586bd062ad71d4e2edb93979519316.jpg)(https://uploads.tapatalk-cdn.com/20200519/44efd6551ec75c98a898f448af6041ad.jpg)

Sent from my boring Droid phone.

What you'd do, get another one?
 
Title: Re: What did you do to or on your CVO today?
Post by: OBB on May 19, 2020, 05:17:09 PM
What you'd do, get another one?
 
Yup  :2vrolijk_21: Been wanting one of these for 8 years since I first saw one. Right place at the right time sort of thing. I'll use this one for mostly solo riding. Work, day trips with the guys and stuff. Keeping the Ultra for two up and touring.
Title: Re: What did you do to or on your CVO today?
Post by: PBSTN on May 19, 2020, 05:49:57 PM
Nice bike. Congrats.
Title: Re: What did you do to or on your CVO today?
Post by: lyn.husen on May 19, 2020, 07:18:57 PM
Installed Lid Covers by Shorefire Design.
Before & After
(https://uploads.tapatalk-cdn.com/20200519/c5851b920ee26b53be54885af7cb1115.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on May 20, 2020, 06:40:02 AM
Came up to the Smokies for a week of riding, weather was nice Sunday and most of yesterday but had to ride back to Pigeon Forge from Deals Gap in the rain and the rest of the week looks like a total washout. Ninth year of doing this trip and have always hit a little rain here and there but I have always expected that we were eventually going to have a week like this.

So far 2020 has been a horrible year (pandemic, losing loved ones, lost income, home repairs, and now this), trying to count my blessings and stay positive but I need a break from all the hits.  Praying for better days ahead.

I feel your pain on the weather.  Looks like we will get a wet ride to Eureka Springs AR, a wet three days there and a wet ride home.  Hopefully you will get some breaks in the weather so you can get out and ride.

Your 2020 sounds just like mine, I have had to deal with everything you have listed.  I'm staying positive as I still do have lots to be thankful for, hopefully you do to.

Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on May 20, 2020, 06:46:29 AM
Mike, beautiful new to you 12 SERG.  Looks very nice.

Well yesterday I updated the software for the boom on my 19 CVO RG.  After 7 months Harley finally fixed it so my iPhone 11 Pro can make and receive phone calls.   Very happy about this.  They also added more apps and stuff still need to check it all out.

I also installed the fan assisted oil cooler.  Not a bad job at all, hardest part was reinstalling the Fang.  I did not use the supplied new oil hoses as the old ones are perfectly good and the same hoses.  I would have had to remove exhaust to replace one of the lines, not worth it. 

Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on May 20, 2020, 06:51:32 AM
Installation complete, now I need rain to stop and have dealer enable the fan. 
Title: Re: What did you do to or on your CVO today?
Post by: SIKBIRD on May 20, 2020, 07:00:45 AM
I feel your pain on the weather.  Looks like we will get a wet ride to Eureka Springs AR, a wet three days there and a wet ride home.  Hopefully you will get some breaks in the weather so you can get out and ride.

Your 2020 sounds just like mine, I have had to deal with everything you have listed.  I'm staying positive as I still do have lots to be thankful for, hopefully you do to.

Thank you Dave, today looks a little better so we’re going to try to log some miles.  I know you’re dealing with something that is much more serious than all my gripes combined and I’m praying for you.  I don’t know if you’re home this week but each time we pass a group I try to see if that Red Pepper is in the pack. Anyway, I hope the weather cooperates for your trip. Be safe.
Title: Re: What did you do to or on your CVO today?
Post by: YELLOWBIRD on May 20, 2020, 10:50:31 AM
Been messing with child #2 since I brought it home last Thursday. Have had the fairing off twice to fix minor things. I forgot how much fun putting this fairing back on but after cleaning up some wiring and getting it out of the way, I'm back down to 3-4 tries to get it hung on the hooks. I did get a chance to ride it to work last Saturday and then get a few miles on it with my brother after work. Title work is done but no plates yet. Sheriff said it's okay as long as I have my title receipt with me. BMV doesn't open back up until the 26th so I made my own plate.  Still needs some TLC but it'll be in top shape as time allows. (https://uploads.tapatalk-cdn.com/20200519/0b586bd062ad71d4e2edb93979519316.jpg)(https://uploads.tapatalk-cdn.com/20200519/44efd6551ec75c98a898f448af6041ad.jpg)

Sent from my boring Droid phone.



CONGRATS OBB!!!!

Beautiful Road Glide, next to Yellowbird, I have always loved that Blue & Black CVO Road Glide!

 :2vrolijk_21: :2vrolijk_21:

Enjoy.

YB
Title: Re: What did you do to or on your CVO today?
Post by: OBB on May 20, 2020, 10:59:33 AM


Mike, beautiful new to you 12 SERG.  Looks very nice.

.....





CONGRATS OBB!!!!

Beautiful Road Glide, next to Yellowbird, I have always loved that Blue & Black CVO Road Glide!

 :2vrolijk_21: :2vrolijk_21:

Enjoy.

YB

Thanks guys. Been wanting one for the last 8 years now but need an Ultra. I now have the best of both worlds.

Sent from my boring Droid phone.

Title: Re: What did you do to or on your CVO today?
Post by: glinkmeyer on May 20, 2020, 11:59:10 AM
Congratulations Mike, very nice looking bike.


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on May 21, 2020, 05:38:32 AM
Thanks SIKBIRD,

You won't see my bike in the area until Monday evening now.

In the process of packing the bike.  At 7:30 am we will be heading west to Eureka Springs AR.  Will be riding with a few Motor Maids, including my wife.  Should be interesting as its their ride, I'm just riding with them.  If weather will cooperate North West AR is a great area to ride, which is why I decided to go with my wife.
Title: Re: What did you do to or on your CVO today?
Post by: WRE4U on May 21, 2020, 10:52:22 AM
Been raining all week!  Wax on wax off.....When it does clear up (maybe Saturday) I'll head out.  Trouble is now it is so freaking clean and shinny, I really want to keep it looking great for a little while.  I usually wipe it down after a couple rides, to make detailing easier, but it hasn't looked this good for awhile
Title: Re: What did you do to or on your CVO today?
Post by: Devilldawgg_CVO on May 22, 2020, 12:00:02 AM
Threw a 21 inch wheel on my bike today...(https://uploads.tapatalk-cdn.com/20200522/a61ad59f3f2226f58ec22d4694592173.jpg)


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: TN on May 22, 2020, 07:54:32 AM
Been messing with child #2 since I brought it home last Thursday. Have had the fairing off twice to fix minor things. I forgot how much fun putting this fairing back on but after cleaning up some wiring and getting it out of the way, I'm back down to 3-4 tries to get it hung on the hooks. I did get a chance to ride it to work last Saturday and then get a few miles on it with my brother after work. Title work is done but no plates yet. Sheriff said it's okay as long as I have my title receipt with me. BMV doesn't open back up until the 26th so I made my own plate.  Still needs some TLC but it'll be in top shape as time allows. (https://uploads.tapatalk-cdn.com/20200519/0b586bd062ad71d4e2edb93979519316.jpg)(https://uploads.tapatalk-cdn.com/20200519/44efd6551ec75c98a898f448af6041ad.jpg)

Sent from my boring Droid phone.

Nice  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: BigLock on May 23, 2020, 09:23:33 PM
Did a 3 hole oil change on Emma Jane yesterday
Title: Re: What did you do to or on your CVO today?
Post by: Mofo67 on May 24, 2020, 06:36:36 AM
Downloaded Android Auto, added a new Klock Werks windshield and moved the XM antenna outside the fairing. Then headed out for about a 250 mile ride.

1-Android Auto worked perfectly paired with my Samsung S9. I was able to start the app with google maps, listen to XM through the HD module and google maps would lower that radio volume to give me directions.
2-New windshield is the correct height and really made a difference in the comfort level of my ride.
3-Moving the XM antenna I did not lose service over the 250 mile ride including many back roads.

Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on May 25, 2020, 08:51:15 AM
Spent the last three days riding the Red Pepper.  Every day had a 50% chance of rain or higher.  Got a few light Sprinkles Thursday, no need for rain gear and did not get wet.  Friday light rain first two hours, then a gully washer for 30 minutes, then the rest was a great day.  Saturday was a perfect day riding around Eureka Springs area and Pig Trail, then yesterday a nice ride home.  1530 miles.  Needs a wash and new front tire now.
Title: Re: What did you do to or on your CVO today?
Post by: Blue666s on May 26, 2020, 09:26:32 AM
Spent the last three days riding the Red Pepper.  Every day had a 50% chance of rain or higher.  Got a few light Sprinkles Thursday, no need for rain gear and did not get wet.  Friday light rain first two hours, then a gully washer for 30 minutes, then the rest was a great day.  Saturday was a perfect day riding around Eureka Springs area and Pig Trail, then yesterday a nice ride home.  1530 miles.  Needs a wash and new front tire now.

glad that Red Pepper is giving you nothing but smiles!  Got the tracking number for my cylinder heads from Don this morning, so final assembly is just around the corner!  We've had tons of rain here in NC, and this week there's a 60% or higher chance of rain until Sunday.  Ugh!
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on May 27, 2020, 07:04:01 AM
They predicted 50% or more chance of rain daily for our Eureka Springs trip, got one down pour most was good weather.  Rain all week here too.  Today is like 50%.

Will be riding Red pepper to DR office this am, when done there over to SMHD.  Need to have the front tire replaced prior to this week ends ride.  This tire got the lowest front tire milage ever, only 10K miles.  Sitting on seat the left side has lot or tread, but the right side is on wear bars.  Pressure is always monitored and kept correct.

Picture on Pig trail, my bike, then wife's bike then Nephews bike.  Had a good time with them over the week end.
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on May 27, 2020, 03:01:27 PM
It was a good CVO morning to do something.  Rain yesterday, rain later today, rain the next day, rain on the overmorrow, rain seemingly forever.  This morning no rain though.  Cool, mostly broken clouds. 

About 6:30 left on the Road King.  Had to break in its new oil and filter change that gone done a couple nights ago.  Oh yeah, also had to finish breaking in the new SAC grips put on it the same night.  Bike was happy this morning.  We did well and killed a tank of fuel.

About 8:45 left again on the Road Glide.  Stretching it out harder the first time since the new engine work.  Sounded and felt really good.  Bike was happy this morning.  We did well and killed most of a tank of fuel.

About 11:00 left on the FXR.  Just 'cause.  Going from the Road Glide to the FXR is like swapping to underwear that's sewn to fit in an entirely different way.  Fortunately both bikes are dialed in to fit me well.  Going from the re-worked Road Glide engine to the Evo is also interesting.  Fortunately the FXR doesn't weigh much; so it's all good.  Bike was happy this morning.  We did well and killed 2/3rd of a tank of fuel. 

Got bike an hour ago.  FXR on the lift now for its spring oil change and any other service I can think of to do to it.  Ooh, I think I'm finally going to get ambitious and take the 20 year oil lines off it to replace with new.  Off to the parts store for some 3/8 line rated for oils.....
Title: Re: What did you do to or on your CVO today?
Post by: TN on May 28, 2020, 08:40:12 AM
It was a good CVO morning to do something.  Rain yesterday, rain later today, rain the next day, rain on the overmorrow, rain seemingly forever.  This morning no rain though.  Cool, mostly broken clouds. 

About 6:30 left on the Road King.  Had to break in its new oil and filter change that gone done a couple nights ago.  Oh yeah, also had to finish breaking in the new SAC grips put on it the same night.  Bike was happy this morning.  We did well and killed a tank of fuel.

About 8:45 left again on the Road Glide.  Stretching it out harder the first time since the new engine work.  Sounded and felt really good.  Bike was happy this morning.  We did well and killed most of a tank of fuel.

About 11:00 left on the FXR.  Just 'cause.  Going from the Road Glide to the FXR is like swapping to underwear that's sewn to fit in an entirely different way.  Fortunately both bikes are dialed in to fit me well.  Going from the re-worked Road Glide engine to the Evo is also interesting.  Fortunately the FXR doesn't weigh much; so it's all good.  Bike was happy this morning.  We did well and killed 2/3rd of a tank of fuel. 

Got bike an hour ago.  FXR on the lift now for its spring oil change and any other service I can think of to do to it.  Ooh, I think I'm finally going to get ambitious and take the 20 year oil lines off it to replace with new.  Off to the parts store for some 3/8 line rated for oils.....



Your stable of bikes is nice, it's a tough chore to ride em all in one day.

Or is it?
Title: Re: What did you do to or on your CVO today?
Post by: bbrown on May 28, 2020, 08:44:27 AM
Ok
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on May 28, 2020, 10:09:31 AM


Your stable of bikes is nice, it's a tough chore to ride em all in one day.

Or is it?

All in one day is rare Phil.  All in the same morning and actually get a 100 miles on each even more.  No matter what the cycle they always get their turn though.  If not the one that missed a turn gets pissed off; and that's never good.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on May 29, 2020, 05:29:55 AM
Got bike packed and ready to ride over to Little Switzerland, NC this morning.  Going to spend two night and do some riding there with a lot of friends.  Should be fun.
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on May 29, 2020, 10:37:32 AM
Got bike packed and ready to ride over to Little Switzerland, NC this morning.  Going to spend two night and do some riding there with a lot of friends.  Should be fun.

Be safe.  Bring condoms and practice your anti-social distancing.  Have fun.



(^ oxymoronic guidance ^)
Title: Re: What did you do to or on your CVO today?
Post by: bbrown on May 31, 2020, 05:03:58 AM
Ok
Title: Re: What did you do to or on your CVO today?
Post by: OBB on May 31, 2020, 07:16:00 PM
More work on the '12. CD front turn signals and CD brake flasher module. New style CD TS vs the CD older style on my '15. Quite a bit of difference. Also changed the kickstand to an eBay one that the foot Tang wasn't almost flattened. Picked up some new chrome and black washers for the 4 point docking station on the back. Cleaned up those screws with some PB blaster and steel wool. They cleaned up well and look a lot better than the rusty ones that were on there. (https://uploads.tapatalk-cdn.com/20200531/95b62d1e60947dc4086e885ac6cca1ec.jpg)(https://uploads.tapatalk-cdn.com/20200531/a58bbbb97bc88f01d3199fdf58239c47.jpg)

Sent from my boring Droid phone.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on June 01, 2020, 06:52:59 AM
Rode the across Smoky Mountain National Park, then the Parkway up to Little Switzerland NC on Friday.  Saturday rode the Rattler and the Devils Whip and some other good twisty NC roads.  Sunday we took good twisty roads back to TN and Barbarossa Saloon along the river then home.  635 miles of curves over three days, 44 bikes.  A good time.

Today I'll ride the King to the DR, and then on some local Errands. 
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on June 01, 2020, 07:17:02 AM
Again, NOT on my CVO but with a fellow CVO'er...rode up to the foothills yesterday, enjoyed a nice catfish dinner at Huck Finns and then the long way home.  We didn't put many miles (around 150) but it was a great day to be out and riding.  Low humidity, not a cloud in the sky and great company.

We did stop at SMHD (first time I've been in a HD dealer in way over a year) and while there was quite a bit of traffic, I never heard the bell ring (they ring the bell, toot horns and such when someone purchases a bike).  Not hearing the bell was very different.  They had two 2020 CVO's and a few used CVO's and lots of 2020's of various models.  Still, with all that foot traffic, youdathunk they would have sold something with a motor instead of just t-shirts...well, also a pair of boots that Vickie really liked  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: TN on June 01, 2020, 10:10:54 PM
Have had the twin scan ll for some time now and just performed the ABS bleed using it today.

success  :orange:
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on June 01, 2020, 11:08:03 PM
Have had the twin scan ll for some time now and just performed the ABS bleed using it today.

success  :orange:

 :2vrolijk_21: Slick little tool  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on June 02, 2020, 06:30:31 AM
Ran out of gas on the 13 CVO King yesterday morning leaving home.  Range said I had 38 miles left.  Gas station in town is 20 miles from home.  At 18.5 miles  from home I was out of gas.  Not happy at all about that, I'll never believe the range on this bike again for sure.  3rd time in my life running out of gas, second time on this bike, happened in 14 same thing range lied and I forgot about it.   Good ride after that about 80 miles doing errands.

Will be riding it again today for some errands and an appointment. 
Title: Re: What did you do to or on your CVO today?
Post by: Chief2505 on June 02, 2020, 09:38:28 AM
Sold it! Well, one of them anyway, the 13 Ultra CVO is gone. Did not get what it might be worth but I got enough for it to make it worth selling.
Title: Re: What did you do to or on your CVO today?
Post by: TN on June 02, 2020, 01:31:13 PM
First time in a long time I've taken an extended ride without lowers. I use to poke at riders with windshields.  ;D



Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on June 02, 2020, 02:13:21 PM
First time in a long time I've taken an extended ride without lowers. I use to poke at riders with windshields.  ;D

I used to habitually take the lowers off in the spring and put them back on in late fall.  The bike is noticeably warmer in the saddle with the lowers on.  Then maybe six years ago didn't put them on that fall.  They ain't been back on since.  Stored nice and safe though.
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on June 02, 2020, 04:08:45 PM
Believe it or not... rode it. :huepfenlol2: :huepfenlol2:

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on June 02, 2020, 04:32:36 PM
Believe it or not... rode it. :huepfenlol2: :huepfenlol2:

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:

 :2vrolijk_21: :2vrolijk_21: :2vrolijk_21:

Title: Re: What did you do to or on your CVO today?
Post by: TN on June 02, 2020, 05:56:41 PM
Believe it or not... rode it. :huepfenlol2: :huepfenlol2:

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:

Pictures please.
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on June 02, 2020, 07:29:58 PM
Pictures please.
No pics... was to busy riding. ;) :D :D

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on June 02, 2020, 07:39:29 PM
Oh wait... i did take a pic... stopped by my nephews house to show him a real motorcycle. He rides a crotch rocket... I have nothing against them but any chance to razz my nephew I take advantage of it.  ;D

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: Grizzly on June 02, 2020, 08:38:10 PM
Ran out of gas on the 13 CVO King yesterday morning leaving home.  Range said I had 38 miles left.  Gas station in town is 20 miles from home.  At 18.5 miles  from home I was out of gas.  Not happy at all about that, I'll never believe the range on this bike again for sure.  3rd time in my life running out of gas, second time on this bike, happened in 14 same thing range lied and I forgot about it.   Good ride after that about 80 miles doing errands.

Will be riding it again today for some errands and an appointment.

Just another reason why I have always relied on resetting my "B" trip meter every time I fill up.  Having said that I have run way more than what the "Range" has told me I had left in the tank.

Sorry to hear of your troubles and hopefully you will now be 3x's lucky and that is the last time you run out.
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on June 03, 2020, 01:07:02 AM
Added bugs.  Removed said bugs.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on June 03, 2020, 07:20:16 AM
Just another reason why I have always relied on resetting my "B" trip meter every time I fill up.  Having said that I have run way more than what the "Range" has told me I had left in the tank.

Sorry to hear of your troubles and hopefully you will now be 3x's lucky and that is the last time you run out.

I do reset the b trip meter every fill up.  Part of the problem is I had been riding Red Pepper for the last month.  When range on her gets to 20 miles left I can usually add .8 to 1 gallon of gas.  So I'm thinking 38 miles left to go 20 is no issue.  Would still have at least 1/2 gallon in tank.  Boy was I wrong. 

I truly hate running out of gas.  I sure hope it never happens again.
Title: Re: What did you do to or on your CVO today?
Post by: TN on June 03, 2020, 08:34:45 AM
Oh wait... i did take a pic... stopped by my nephews house to show him a real motorcycle. He rides a crotch rocket... I have nothing against them but any chance to razz my nephew I take advantage of it.  ;D

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:

It does exist, rinse and repeat today

doctors order.  :orange:
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on June 03, 2020, 10:44:42 AM
It does exist, rinse and repeat today

doctors order.  :orange:

Don't ask Gary to ride two days in a row.  It would screw with the time-space-continuum.  Probably cause worldwide pestilence and rioting in the streets!


oh, wait...... (chit)
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on June 03, 2020, 10:46:28 AM
It does exist, rinse and repeat today

doctors order.  :orange:
Dr. Phil ;) :D :D... doubt that'll happen today... highs in the mid to upper 90's today and my daughter from out of town is visiting for the day... family time and sucking up as much AC as I can. ;D ;D

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on June 03, 2020, 01:08:41 PM
Oh wait... i did take a pic... stopped by my nephews house to show him a real motorcycle. He rides a crotch rocket... I have nothing against them but any chance to razz my nephew I take advantage of it.  ;D

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:

Still looking good Gary.

Why don't you saddle that thing up and come see an old hillbilly next month? Heck its only been about 15 years since I saw ya.
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on June 03, 2020, 02:23:56 PM
Still looking good Gary.

Why don't you saddle that thing up and come see an old hillbilly next month? Heck its only been about 15 years since I saw ya.
Thanks.... appreciate it! It's probably my last motorcycle so have to take care of it.

Yea, it's been awhile... first met you @ '05 Va. HOG Rally and I think the last time I saw you was on the way to MV in '06 when Otis and I stopped by. Right now doubt I'll be making it to W.Va next month but you never know there has been a "mystery" guest show up there before. :D

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: JMatson on June 04, 2020, 05:51:23 PM
Had Soundz speakers and amp installed.  Hopefully done having to deal with blown saddlebag speakers.
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on June 04, 2020, 08:14:18 PM
Great move!!!! Stuart
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on June 04, 2020, 08:33:58 PM
This morning, after the rain stopped, I anti-social distanced for about 125 miles on the Road Glide.  72 degrees.  This afternoon just got home from anti-social distancing on the Road King for another 100 miles.  92 degrees.  I think this morning was better.  Just a little bit.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on June 06, 2020, 06:27:28 AM
Added my club decal to front windshield of the CVO RG.  Mapped out a route to lead the club up to another clubhouse in North East TN, about a 135 mile ride one way today.  We have good weather so should be a great ride today.
Title: Re: What did you do to or on your CVO today?
Post by: TN on June 06, 2020, 11:34:05 AM
Took an early ride, picked up bag of peaches, bag of fresh maters, one more stop for a lb of pralines. Logged 157miles., my wife will insist on me going again, soon. Making them think it’s their idea ain’t too tough. She doesn’t ride anymore.


Just Ride.  :orange:

Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on June 06, 2020, 11:45:02 AM
Took an early ride, picked up bag of peaches, bag of fresh maters, one more stop for a lb of pralines. Logged 157miles., my wife will insist on me going again, soon. Making them think it’s their idea ain’t too tough. She doesn’t ride anymore.


Just Ride.  :orange:


That brought back a memory.  Thank you Phil.  So it's like this:

My Dad was, occasionally, absolutely full of chit.  This is the guy who took me to a funeral when I was four or five only because the dead guy had an identical twin.  You can guess where there that went.  Or it was his fault I got suspended for three days in Kindergarten because the other boys did not believe it when I shared the story of how my Dad had shot Billy the Kid.  A fight ensued as I defended my dad's honor.

So, for as long as I can remember before I was 12 or 13 years old my Dad had told me that praline was just a fancy word for a woman's bra.  Have no idea how or when it originally came up but, occasionally, like when you'd see a bra in the laundry, he'd just call it a praline.  Subtle (it seemed).

Then, of course, about the time some girls were beginning to need them a 12 or 13 year old boy does what a 12 or 13 year old boy does and says something.  Except I call it a praline.  When I got home and expressed my indignation my dad was very very amused....
Title: Re: What did you do to or on your CVO today?
Post by: TN on June 07, 2020, 07:00:16 AM
Does pralines give you a woody and something to smile about? Ya gotta have a song that goes along with this.


:trailer:


Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on June 07, 2020, 12:35:14 PM
Does pralines give you a woody and something to smile about? Ya gotta have a song that goes along with this.


:trailer:


Will have to work on the verse.



As for the "what did you do" thing today; left on the Road Glide about 7:00 before it got hot.  Got home about 10:45 just as the warm was settling in.  Another couple hundred miles on the new engine work.  Thank the Travel Gods it continues to perform well and sound great.  Really quiet top end.  Way quieter cam, even with the roller rockers, than I expected.  EMS package may have finally finished dialing things in as I'm finally not noticing any even subtle changes.  About a half and half mix this morning of 75 on the highway and other miles on state and county roads.  Once again an almost dead 40 mpg.
Title: Re: What did you do to or on your CVO today?
Post by: dayne66 on June 07, 2020, 01:45:39 PM
Recovered the security codes for both my FLHXSE3 and the Wife's FLD...damned if we could remember them!
Title: Re: What did you do to or on your CVO today?
Post by: kevin_n on June 07, 2020, 08:01:59 PM
Just got back from a weekend guys trip to the motorcycle museum in Anamosa IA. 450 miles of good times and plenty of sunshine.  :bananarock:
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on June 07, 2020, 08:18:23 PM
 Rode down to Boone NC with Dwayne and Pam, Steve and Miss Susan. Rode down over the Dragon, Saltville, Damascus and Mountain City. Ate at the Dan'l Boone Inn which has recently reopened after C19 then hit the parkway and stopped at Station Inn/Freebornes. The Freeborne restaurant/bar is still closed but the Station inn and Woodys were open. Completed the ride back to Bluefield via Sparta, independence, Wytheville and back via old 52.

Total of 260 miles, beautiful weather, beautiful roads and wonderful friends. All in all a great day.
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on June 08, 2020, 03:25:41 PM
FXR's turn this morning.  Gawd what a gorgeous day to ride.  Thin cloud deck you could see blue through.  Upper 70s.  No wind.  You just couldn't ask for better.

Before leaving tweaked the timing curve (aftermarket ignition).  Curvemaker is the software package.  Nothing special, just added four degrees for a point of comparison.  157 miles later was at a gas station a mile from the house.  52.87 miles per gallon. 

I can't say I really noticed any great difference in how the bike ran.  That's the best fuel mileage it's ever given though.  After it cooled off a bit pulled the plugs and they looked fine.  Never heard any detonation either. 
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on June 09, 2020, 06:28:58 AM
Rode Red Pepper to the Dr appointment.  Then rode to an out of town butcher to get some of his really good bacon, he sells to restaurants all over the area.

Will ride to another Appointment today, then over to SMHD to have my blown saddle bag lid speaker replaced.  Then I will have then turn the fan assisted oil cooler on. 

Got a good chance of getting wet, if its not rain when  its time to leave, I'll go on bike.  Down pour and I'll reschedule.
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on June 09, 2020, 09:02:36 PM
Put on about 350 miles riding NW Arkansas after getting pig trail HD to replace front wheel bearings , big shout out to them for getting me in and out fast
Title: Re: What did you do to or on your CVO today?
Post by: bbrown on June 09, 2020, 10:37:45 PM
Really
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on June 10, 2020, 08:45:20 AM
Really
. Yupp!!
Title: Re: What did you do to or on your CVO today?
Post by: 2019CVONH on June 10, 2020, 11:52:15 AM
Purchased some FuelMoto 2/1/2 Headers a few weeks ago and just ordered the matching Hi Roller 4" Black matching mufflers so I can change the baffle to tune the bike better.

Title: Re: What did you do to or on your CVO today?
Post by: TN on June 10, 2020, 02:13:00 PM
new set of AE's

Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on June 11, 2020, 06:50:36 AM
Installed the new RickRac GoPro 360 mount on my Red Pepper.  Plan to test it out this week end on our ride to Shelbyville.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on June 12, 2020, 06:41:45 AM
Packed the bike this morning for our week-end trip to Shelbyville, TN.  Going to be a nice Ride over hwy 30 up Dayton Mountain then dropping down into Sequatchie valley, the view is beautiful and the curves are great.  Will continue on to Spencer and McMinnville for more good views and curves. 

Should be a great weekend of riding with lots of Motor Maids.
Title: Re: What did you do to or on your CVO today?
Post by: SIKBIRD on June 12, 2020, 10:30:39 AM
Packed the bike this morning for our week-end trip to Shelbyville, TN.  Going to be a nice Ride over hwy 30 up Dayton Mountain then dropping down into Sequatchie valley, the view is beautiful and the curves are great.  Will continue on to Spencer and McMinnville for more good views and curves. 

Should be a great weekend of riding with lots of Motor Maids.

Only about 15 miles to Lynchburg from Shelbyville, you gonna hit the JD distillery? The tour is very interesting, I’ve done it several times.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on June 12, 2020, 08:42:22 PM
Yaffe Stealth plate frame on the '12. She's coming along. Needs to go to a good detailer yet.(https://uploads.tapatalk-cdn.com/20200613/23be4852a817489ef1a421876d177021.jpg)(https://uploads.tapatalk-cdn.com/20200613/7b2283c8203f7e5ff4d5dcf8c669a491.jpg)

Sent from my boring Droid phone.

Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on June 12, 2020, 08:45:37 PM
Not on the CVO did I accomplish anything today but on the lift that raises them up and down.  And oh my gawd am I happy when I'm stupid sometimes.

Few weeks ago I started noticing the lift having a definite "chunk" at one spot on its way up or down.  Crap (I thought) bad bearing somewhere or, more likely, I'd somehow flat spotted one of the solid steel rollers.  The lift is a good heavy lift but was produced by a steel fabricator as a side line for them in an industrial park about 40 miles away.  I bought it close to 20 years ago and the company has been gone for a few years I know of.  So if something is bad I'm making replacement parts or buying a new lift.

New lifts are expensive.  But before even looking under my old I'd looked at new ones.  Because, well, new tools ;D .  You get it.

It would still be nice to fix the old beast if I could.  It's got sentimental value.

Half hour ago +/- beer finally decided to take a close look at it.  See what was going on.  Access to a buddy's machine shop tomorrow on Saturday when they're closed to make whatever I might need. 

Lift goes up, CLUNK.  Lift goes down, CLUNK.  All the rollers look good.  Up and down one more time.  I'm a dumass  :mango: .

Sometime right before the problem began I must have been changing a front wheel on something.  Had the wheel chock off.  And I put it back together with a bolt going through the floor that was 1/4" too long.  It was hitting a front cross bar carrying the two top front rollers.  Clunk, clunk, clunk.  Bar is still fine.  Bolt was bent.  New bolt from the drawer and lift is like brand new again.  Gotta love it when a plan comes together!
Title: Re: What did you do to or on your CVO today?
Post by: TN on June 13, 2020, 11:11:50 AM
I’ve been by these guys many times but the first time I stopped. Something was different about them today. :drink:



Title: Re: What did you do to or on your CVO today?
Post by: OBB on June 13, 2020, 11:39:42 AM
Found the extended heel shifter in my spare parts drawer of my toolbox that I had on my '11 and put it on my '12 this morning. (https://uploads.tapatalk-cdn.com/20200613/5383b581d56d46792c016be868bb4d0c.jpg)

Sent from my boring Droid phone.

Title: Re: What did you do to or on your CVO today?
Post by: brianfl67 on June 13, 2020, 05:23:27 PM
Put this on yesterday love it(https://uploads.tapatalk-cdn.com/20200613/7436d8414f83be1b4905a962e006384e.jpg)

Sent from my SM-N975U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: JCZ on June 13, 2020, 08:15:49 PM
I rode through Monument Valley, Utah this morning.....

(https://live.staticflickr.com/65535/50002607898_69b2a3b493_b.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on June 13, 2020, 10:53:10 PM
I rode through Monument Valley, Utah this morning.....

(https://live.staticflickr.com/65535/50002607898_69b2a3b493_b.jpg)

Run, Forrest, Run...although, that's where he stopped running... ;D
Title: Re: What did you do to or on your CVO today?
Post by: mpascalar on June 14, 2020, 12:00:45 PM
(https://uploads.tapatalk-cdn.com/20200614/2baf6105afb8776770977e9ccd91728d.jpg)I took mine to the Santa Monica Pier (rode all of RT 66).
Title: Re: What did you do to or on your CVO today?
Post by: mpascalar on June 14, 2020, 12:03:54 PM
(https://uploads.tapatalk-cdn.com/20200614/142400cf4c6b8b92ba4156be31a175e5.jpg)Great Cafe at the mid point
Title: Re: What did you do to or on your CVO today?
Post by: JCZ on June 14, 2020, 06:01:42 PM
I rode through the red rock country of Moab, Utah today.....


(https://live.staticflickr.com/65535/50006171568_9ba9932ff9_b.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: JCZ on June 14, 2020, 06:04:02 PM
I went by Arches National Park also.......headed up in to Idaho tomorrow.



(https://live.staticflickr.com/65535/50006702776_cd1b21bc5b_b.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on June 15, 2020, 07:10:42 AM
Only about 15 miles to Lynchburg from Shelbyville, you gonna hit the JD distillery? The tour is very interesting, I’ve done it several times.

Tours are still shut down.  I have toured the place a few times, the friend I am staying with use to work there.  I'm a Jack Danials squire.  Love the little town, good place to get a bite to eat.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on June 15, 2020, 07:13:46 AM
I rode through Monument Valley, Utah this morning.....

(https://live.staticflickr.com/65535/50002607898_69b2a3b493_b.jpg)
I love Monument Valley and most all of Utah.  Love riding out there, Escalante Stair Case is great too.  So Jealous.  Rode Utah last Spring.
Title: Re: What did you do to or on your CVO today?
Post by: TN on June 15, 2020, 08:21:07 AM
Performed annual maintenance on jiffy stand.

Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on June 15, 2020, 09:29:32 AM
Performed annual maintenance on jiffy stand.

Must be in some way refreshing when something in your life gets a fresh new nipple once a year.  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: SIKBIRD on June 15, 2020, 10:13:35 AM
Tours are still shut down.  I have toured the place a few times, the friend I am staying with use to work there.  I'm a Jack Danials squire.  Love the little town, good place to get a bite to eat.

Gotcha, I know a couple of guys that are squires.  The first time I went you could buy JD and have it shipped to your home but you could not walk out with a bottle.  The last time I went you could buy it and take with you.  I asked the guy how they were able to do that with it being a dry county and his response was “we are not selling whiskey, we are selling commemorative bottles that just happen to have whiskey in them”.
Title: Re: What did you do to or on your CVO today?
Post by: JCZ on June 15, 2020, 07:09:13 PM
I rode across Idaho on the Lewis & Clark Trail today..... and the first place that the US Flag was raised west of the Rockies.....and the 45th parallel.

     (https://live.staticflickr.com/65535/50010628221_46ccaac19d_b.jpg)


  (https://live.staticflickr.com/65535/50010098303_d067d156fd_b.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on June 16, 2020, 06:33:36 AM
Rode the 13 CVO King 113 miles yesterday doing some errands.

Will put a couple hundred miles on her today, doing SMHD's Project Ridemore ride.  Its always fun and interesting on back roads that most have never ridden.
Title: Re: What did you do to or on your CVO today?
Post by: TN on June 16, 2020, 08:12:28 AM
Must be in some way refreshing when something in your life gets a fresh new nipple once a year.  :2vrolijk_21:

New spring also.   :orange:
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on June 16, 2020, 09:19:38 AM
Got Ol Betsy out of her parking spot and rode her into the lab for a little rub and shine.

Still looks good to be 16 years old.

PS can somebody rotate this friggin picture or advise me how to do it??
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on June 16, 2020, 10:35:32 AM
Always pleased to offer assistance where I'm able  :2vrolijk_21:


 ;D ;D ;D 
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on June 16, 2020, 10:37:45 AM
Ok, asshole mode = off .


Here ya go.
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on June 16, 2020, 10:43:19 AM
Thanks Don
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on June 16, 2020, 10:45:50 AM
Got Ol Betsy out of her parking spot and rode her into the lab for a little rub and shine.

Still looks good to be 16 years old.

PS can somebody rotate this friggin picture or advise me how to do it??
Yes she does!!! :2vrolijk_21:

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on June 16, 2020, 10:49:01 AM
Thanks Don

No sweat.  There are a ton of free photo editing apps out there for either PC or phone.  Find any of them than just look for a "rotate" function.  Might also be as easy as just rotating the phone before taking the picture.

A lot of phones are good about automatically rotating a picture for viewing on your phone screen automatically for your viewing.  So you never know its native mode is sideways.
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on June 16, 2020, 11:45:19 AM
I originally downloaded a smaller picture to the site that I transferred to my PC from my phone and it was oriented correctly but the quality was lacking. I then transferred the pic to my PC again only this time a larger file. When I first downloaded it to the site it was 90 degree off so I then went into the PC and rotated it and downloaded that and it changed on the PC file but not on the site, so I gave the f up....
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on June 16, 2020, 11:49:39 AM
I originally downloaded a smaller picture to the site that I transferred to my PC from my phone and it was oriented correctly but the quality was lacking. I then transferred the pic to my PC again only this time a larger file. When I first downloaded it to the site it was 90 degree off so I then went into the PC and rotated it and downloaded that and it changed on the PC file but not on the site, so I gave the f up....


It's all good.  The most important thing to remember with sh*t like this is to never, under any circumstances, ask Uncle Mike to fix it.  Do that and we're all doomed.
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on June 16, 2020, 11:54:50 AM
Buddy

You ain't never lied
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on June 16, 2020, 01:56:00 PM

It's all good.  The most important thing to remember with sh*t like this is to never, under any circumstances, ask Uncle Mike to fix it.  Do that and we're all doomed.
Buddy

You ain't never lied
Yo Unc…. I think you just been...

(http://www.cvoharley.com/smf/index.php?action=dlattach;topic=56245.0;attach=174869;image)

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: OBB on June 16, 2020, 02:14:53 PM
Always pleased to offer assistance where I'm able  :2vrolijk_21:


 ;D ;D ;D 


Sent from my boring Droid phone.

Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on June 16, 2020, 02:17:08 PM

Yo Unc….



No way that's right Gary.  If it was Uncle Mikey and a tech issue that would have to be a SHORT BUS :pepper: .
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on June 16, 2020, 02:51:05 PM

No way that's right Gary.  If it was Uncle Mikey and a tech issue that would have to be a SHORT BUS :pepper: .
Damn!!!!  :o :huepfenlol2:

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: Grizzly on June 16, 2020, 02:55:06 PM
Hey Shrader,

That sure is one fine looking ride you have there.   :2vrolijk_21:

I still miss my '05 that I sold back in 2015 with 92k on the dial, but she too was in great shape after 10 years.

Enjoy that beautiful bike.
Title: Re: What did you do to or on your CVO today?
Post by: JCZ on June 16, 2020, 09:30:18 PM
I left Salmon, Idaho about 6:30 a.m. this morning and rode the Bitterroot Valley of Montana.... 

(https://live.staticflickr.com/65535/50013783018_38fb584834_b.jpg)


I finally arrived at my home away from home for the next four days, historic Tamarack Lodge in Hungry Horse, Montana......just outside of Glacier National Park.

(https://live.staticflickr.com/65535/50014571687_f74f44e62c_b.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: OBB on June 17, 2020, 06:06:52 AM
I left Salmon, Idaho about 6:30 a.m. this morning and rode the Bitterroot Valley of Montana.... 

(https://live.staticflickr.com/65535/50013783018_38fb584834_b.jpg)


I finally arrived at my home away from home for the next four days, historic Tamarack Lodge in Hungry Horse, Montana......just outside of Glacier National Park.

(https://live.staticflickr.com/65535/50014571687_f74f44e62c_b.jpg)
You keep saying "I". You leave the wife along side the road somewhere?
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on June 17, 2020, 07:27:47 PM
I had a new set of tires installed today at 32K. Stayed with stock as they've treated me well so far. Picked up a new set of plugs and wires. Figured since I'll have the tank off next week to install new bars and heated grips that the timing was right.
Title: Re: What did you do to or on your CVO today?
Post by: JCZ on June 17, 2020, 11:41:52 PM
You keep saying "I". You leave the wife along side the road somewhere?

She's at home.  This is a solo bucket list ride to do all of these Rocky Mountain locations in one ride.

I rode Glacier National Park today....

(https://live.staticflickr.com/65535/50017408721_b2c9cb58de_b.jpg)


I was taking a picture of this sign when I noticed the little buck in the background looking back at me.....

(https://live.staticflickr.com/65535/50016881573_78efff587c_b.jpg)


(https://live.staticflickr.com/65535/50016879248_5a899a81fb_b.jpg)


(https://live.staticflickr.com/65535/50017665342_de4cfd6d69_b.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: GQ_Knuckle_Draggerz on June 18, 2020, 12:24:02 AM
Cherohala Skyway today

*disclaimer*  w/o incident

(https://uploads.tapatalk-cdn.com/20200618/95de6d829fb0e5bd337fa41b693f261e.jpg)


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on June 18, 2020, 06:35:05 AM
I had a new set of tires installed today at 32K. Stayed with stock as they've treated me well so far. Picked up a new set of plugs and wires. Figured since I'll have the tank off next week to install new bars and heated grips that the timing was right.

Are you saying you got 32K out of the factory tires? 

Since the 17 model year 13~14K is best I have managed.  Usually closer to 12K
Title: Re: What did you do to or on your CVO today?
Post by: TN on June 18, 2020, 06:43:11 AM
 :orange:

Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on June 18, 2020, 11:17:52 AM
LOL, no Dave, 2nd set of replacement tires. That's a 16K average, still had at least another 1000 miles to get to the wear bars but one of my local dealers was only charging $45.00 per wheel on the bike for installation instead of $125.00 per and the promotion was almost over so I took advantage of their generosity.
Title: Re: What did you do to or on your CVO today?
Post by: noharley on June 18, 2020, 08:08:40 PM
Beautiful country...
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on June 18, 2020, 08:12:34 PM
LOL, no Dave, 2nd set of replacement tires. That's a 16K average, still had at least another 1000 miles to get to the wear bars but one of my local dealers was only charging $45.00 per wheel on the bike for installation instead of $125.00 per and the promotion was almost over so I took advantage of their generosity.

$125 to R&R a wheel then dismount and mount and balance a tire.  That's normal?  It may be, I really don't pay attention to such things enough to say.  But, damn...  That's enough to make my special places pucker up just thinking about it; and again remind me why I prefer to do my own.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on June 19, 2020, 06:33:13 AM
LOL, no Dave, 2nd set of replacement tires. That's a 16K average, still had at least another 1000 miles to get to the wear bars but one of my local dealers was only charging $45.00 per wheel on the bike for installation instead of $125.00 per and the promotion was almost over so I took advantage of their generosity.

Okay that makes much more sense.  Wish I could even get 16K out of a rear on either bike.  $125 is not for tire installation and ballance, but dealers are very high on it.  Same with actual tire price. 

I'll need front and rear on the King in next couple thousand miles.  Most-likely will be American Elite again, but thinking hard about Commander 3's

Riding the CVO Road Glide over to SMHD for the 30K service.  Also to look at tank trim ring that gas cap screws into.  Paints coming off, should be covered under warranty. 
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on June 19, 2020, 01:39:43 PM
Well hopefully they'll take care of you Dave. Wow 30K already, and you have 2 bikes! I was all set to try out the Commander III's this time but they don't make one for our 21s, but if they ever do I'll give em a shot for sure.

Ride safe!
Kelly
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on June 19, 2020, 01:52:39 PM
$125 to R&R a wheel then dismount and mount and balance a tire.  That's normal?  It may be, I really don't pay attention to such things enough to say.  But, damn...  That's enough to make my special places pucker up just thinking about it; and again remind me why I prefer to do my own.

Your absolutely right, but $125.00 is the average hourly rate at the stealers out here on the left coast and the only place you can buy the D407 & D408's for the most part. They charge an hour labor per on the bike for turnkey service plus $4-$5 each to get rid of the old ones since the land fills won't take em any more out here (EPA), and I usually get 10 to 15% off locally but this was a better deal
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on June 19, 2020, 02:23:39 PM
Your absolutely right, but $125.00 is the average hourly rate at the stealers out here on the left coast and the only place you can buy the D407 & D408's for the most part. They charge an hour labor per on the bike for turnkey service plus $4-$5 each to get rid of the old ones since the land fills won't take em any more out here (EPA), and I usually get 10 to 15% off locally but this was a better deal

It's not that the numbers don't add up.  They still seem painful when you're old enough to remember mounting and balancing free with tire purchase on cars and paying $25 for front and rear on a bike.  Gawd, it's no wonder my personal check engine light comes on every once in awhile....
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on June 19, 2020, 05:12:47 PM
I hear ya. Back in the early ninety's the same shop that I just dealt with which is now called Emerald City HD was called Lynnwood Cycle Barn (different owners). They used to do free mounting and balancing turnkey as long as you bought your tires from them at MSRP. A lot of the indie's these days are charging an hour each as well at around $90.00 an hour around here. Ouch.  :-\

 Ahhhh the good ol days!
Title: Re: What did you do to or on your CVO today?
Post by: Indenial on June 21, 2020, 07:47:01 AM
Made a trip to near Dallas to see Carol Burks and had him install the Ohlin front cartridges.  He sent me the Ohlin rear shocks in March and I installed them myself.  Before I left, he checked the rear shocks and fine tuned them and replaced the spring because he thought it was too heavy. He put in a lighter one and what a nice difference.  The bike now floats and eats up the curves. Then I spent 5 days in the Ozarks "testing" them out.  During this trip I turned 100,000 miles on my Road Glide. Love that bike and will continue to ride it until I can't.
Title: Re: What did you do to or on your CVO today?
Post by: JCZ on June 21, 2020, 08:49:33 PM
I rode from Glacier National Park to Red Lodge, Montana.  Going to ride over Bear Tooth Pass tomorrow..........along with many others, apparently.  This town is full of motorcycles.  It was 71F at 6:00 p.m. so it's motorcycle riding weather here in Montana!


(https://live.staticflickr.com/65535/50031637871_e7be8c2b3a_b.jpg)


(https://live.staticflickr.com/65535/50031648161_d156192787_b.jpg)


(https://live.staticflickr.com/65535/50031903052_e118bde311_b.jpg)


(https://live.staticflickr.com/65535/50031907927_572b821a05_b.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on June 22, 2020, 06:31:05 AM
I rode from Glacier National Park to Red Lodge, Montana.  Going to ride over Bear Tooth Pass tomorrow..........along with many others, apparently.  This town is full of motorcycles.  It was 71F at 6:00 p.m. so it's motorcycle riding weather here in Montana!

(https://live.staticflickr.com/65535/50031637871_e7be8c2b3a_b.jpg)

(https://live.staticflickr.com/65535/50031907927_572b821a05_b.jpg)

Bearthooth pass is my favorite road in the country, my wife's also.  Every time we ride out to Sturges, we go home via Red Lodge and Beartooth pass, its a 700 mile detour for us, but worth it.  Enjoy 
Title: Re: What did you do to or on your CVO today?
Post by: Grizzly on June 22, 2020, 10:53:55 AM
Yeah, Beartooth is one of my wife's and my favourite rides as well.  Last year on a trip out west we were supposed to do it for the third time, but unfortunately our trip was cut short when I ended up in the Jackson hospital for 5 days with pneumonia and had to fly home with nurse by my side... Doc said I had a oxygen level of 68 when admitted and that was at 6,200'.  So had I gone for Beartooth the next day, I never would have made it over according to his expert advise.

With having COPD I'm sill dealing with the after effects of pneumonia but much, much better than I was... It actually helps to ride because it is forcing air into me!   :2vrolijk_21:

Hopefully we'll get another opportunity to ride Beartooth someday.  Till then we have wonderful memories.

Enjoy your ride JC.
Title: Re: What did you do to or on your CVO today?
Post by: JCZ on June 22, 2020, 09:19:44 PM
Yeah, Beartooth is one of my wife's and my favourite rides as well.  Last year on a trip out west we were supposed to do it for the third time, but unfortunately our trip was cut short when I ended up in the Jackson hospital for 5 days with pneumonia and had to fly home with nurse by my side... Doc said I had a oxygen level of 68 when admitted and that was at 6,200'.  So had I gone for Beartooth the next day, I never would have made it over according to his expert advise.

With having COPD I'm sill dealing with the after effects of pneumonia but much, much better than I was... It actually helps to ride because it is forcing air into me!   :2vrolijk_21:

Hopefully we'll get another opportunity to ride Beartooth someday.  Till then we have wonderful memories.

Enjoy your ride JC.

Wow, sounds like you had a close call there.....happy to know that you're still sucking air!

If I remember correctly, didn't you go down to Ariz. every winter?  If you get down there again, let me know.....I'm in the Tucson area now.

I'm going to shoot you a PM.
Title: Re: What did you do to or on your CVO today?
Post by: JCZ on June 22, 2020, 09:29:14 PM
Today I rode up over Beartooth Pass, through Cooke City, Mt. and Cody, Wy.


(https://live.staticflickr.com/65535/50034969713_6f6f424573_b.jpg)


(https://live.staticflickr.com/65535/50034969048_16811ea9e3_b.jpg)


(https://live.staticflickr.com/65535/50035512761_41933981fb_b.jpg)


(https://live.staticflickr.com/65535/50035772637_28fef56a17_b.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on June 23, 2020, 11:25:48 AM
Spent most of the day yesterday replacing my plugs, went with NGK 3521 Iridiums ($8.99 each at local parts store), wires, chose to go with 10mm Screamin Eagle's, new bars, 12" FMB Baggers Phatty Mercanary's (Merc's) and a set of blacked out Kahuna Heated Grips. Everything works extremely well and looks killer. I'll ad some pic's when I get a chance.
Title: Re: What did you do to or on your CVO today?
Post by: BigLock on June 23, 2020, 07:14:41 PM
Well Emma Jane get her first set of tires today. She had 18900 miles on that set. Went back with the OEM D407 & D408 Dunlops.
Title: Re: What did you do to or on your CVO today?
Post by: Bav on June 24, 2020, 08:39:35 AM
Just took off the fuel tank to get some good photos of the bubbling paint on the inner and outer rocker box covers. Also the paint is bubbling on the primary cover. Warranty is up next month so want to get it all sorted now.

Anyone else had issues with this?


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on June 24, 2020, 11:59:04 AM
Spent most of the day yesterday replacing my plugs, went with NGK 3521 Iridiums ($8.99 each at local parts store), wires, chose to go with 10mm Screamin Eagle's, new bars, 12" FMB Baggers Phatty Mercanary's (Merc's) and a set of blacked out Kahuna Heated Grips. Everything works extremely well and looks killer. I'll ad some pic's when I get a chance.

Here are a couple pic's

Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on June 24, 2020, 11:59:53 AM
New Bars

Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on June 24, 2020, 12:00:55 PM
And grips

Title: Re: What did you do to or on your CVO today?
Post by: michaelokielee@yahoo.com on June 24, 2020, 06:42:35 PM
Late Post, Added KST Kustoms Vanguard Collection, 14" Pioneers and Kahuna Heated Grips. Took me 2 hours and 3 beers to install. I wish I would have done it sooner!! :pepper:
Title: Re: What did you do to or on your CVO today?
Post by: michaelokielee@yahoo.com on June 24, 2020, 06:43:31 PM
Another
Title: Re: What did you do to or on your CVO today?
Post by: michaelokielee@yahoo.com on June 24, 2020, 06:44:07 PM
Another
Title: Re: What did you do to or on your CVO today?
Post by: JCZ on June 25, 2020, 12:26:26 AM
I rode Rocky Mountain National Park here in Colorado this afternoon....

(https://live.staticflickr.com/65535/50042030293_f5aaf46dd9_b.jpg)


Here's a Marmot hard at work at about the 11,750' elevation......

(https://live.staticflickr.com/65535/50042844332_845db40af7_b.jpg)



And the elk heard......

(https://live.staticflickr.com/65535/50042584761_1e77867354_b.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: Bav on June 25, 2020, 01:40:05 AM
Just took off the fuel tank to get some good photos of the bubbling paint on the inner and outer rocker box covers. Also the paint is bubbling on the primary cover. Warranty is up next month so want to get it all sorted now.

Anyone else had issues with this?


Sent from my iPhone using Tapatalk
Someone has told me this could be due to overheating possibly caused by sumping?

(https://uploads.tapatalk-cdn.com/20200625/ddcfcde55459785027489c1fc6b87038.jpg)


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: bigC on June 26, 2020, 08:59:31 AM
Put on my new Corbin seat.
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on June 26, 2020, 11:39:48 AM
Well done, looks fantastic, you're gonna love that seat.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on June 26, 2020, 12:12:37 PM
Put on my new Corbin seat.
I really like that. I'm afraid to ask what that ran though. I demo'd an HD Tall Boy seat yesterday and now I'm wondering why I didn't do that 5 years ago. I'm in the market for something to replace my Hammock now.

Sent from my boring Droid phone.

Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on June 26, 2020, 05:57:41 PM
 replaced my soundz amp (free) it bit the dust on my Arkansas trip, up graded TP speakers with iron 65, they traded the 61s plus 150 bucks.  replaced the commander 3 on the front, it broke a belt or something, started vibrating at 65 mph and got worse the faster i went, pulled it off had it checked and it wanted over 3 oz so back to a Dunlop for now, all is good.   gave it a 3 hole service. repacked my mufflers, right muffler packing was gone. ready to hit the road next weekend, heading to Wisconsin/ upper Michigan area   
Title: Re: What did you do to or on your CVO today?
Post by: KGB on June 26, 2020, 07:06:50 PM
I really like that. I'm afraid to ask what that ran though. I demo'd an HD Tall Boy seat yesterday and now I'm wondering why I didn't do that 5 years ago. I'm in the market for something to replace my Hammock now.

Sent from my boring Droid phone.

You could always sell the 2012 and buy the seat! Its only money Mike!  :)
Title: Re: What did you do to or on your CVO today?
Post by: lyn.husen on June 26, 2020, 10:51:30 PM
Installed a Softbrake Extended 1” Brake Lever & their Extended 1.5” Shift Levers.

(https://uploads.tapatalk-cdn.com/20200627/8c519cf86874db5d73ffc72f098f16d5.jpg)

(https://uploads.tapatalk-cdn.com/20200627/16279c9bd00ed8e8aca2bcbe2dae9c99.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: backroad Mike on June 28, 2020, 10:30:06 AM
Completed yesterday.  Took a few more years than on my last bike. 

Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on June 28, 2020, 12:39:17 PM
Congrats on the 100K.
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on June 28, 2020, 12:41:23 PM
Not today OR on my CVO but middle grandson rode to Myrtle with me last Sunday. 446 miles in a day. His first long ride and he did great.
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on June 28, 2020, 12:43:21 PM
...and then wanted to ride back with me yesterday. 894.5 miles total. Pretty proud of him. He is already talking about when we can do an iron butt ride. Not bad for a ten year old. Not many his age have that under their belt.
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on June 28, 2020, 02:43:05 PM
What an awesome experience Howard. The two of you will remember that for the rest of your lives. Very cool!
Title: Re: What did you do to or on your CVO today?
Post by: Robmay on June 28, 2020, 04:58:09 PM
That’s awesome Howard! Not many his age have that opportunity!!


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Grizzly on June 28, 2020, 05:42:14 PM
What a thrill for the both of you.

You are a lucky fellow for sure.  Not only for having a grandchild, but one that can go the distance with you.

As previously said, you will both remember that first big journey for the rest of your lives.

Way to go Howard & Grandson who no doubt kept Gramps heading in the right direction.

 :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on June 29, 2020, 07:00:22 AM
Wow, that is really cool Howard.  Making memories to last a life time. 


All I did was update the Boom GTS software, as its been rainy here.
Title: Re: What did you do to or on your CVO today?
Post by: BigLock on June 29, 2020, 08:10:25 AM
Well I'll been in Maggie Valley a few days now it's been raining off and on each day. But I'll been able to ride up this morning and it's a thunderstorm. I may just set the day out and set in this rocking chair at Holiday Motel.
Title: Re: What did you do to or on your CVO today?
Post by: JCZ on June 29, 2020, 07:48:05 PM
I rode another 300 miles today, from Montrose, Colorado to Grants, New Mexico.  And in that ride today, I rode the Million Dollar Hwy. again.....

(https://live.staticflickr.com/65535/50059480688_7f35d183a0_b.jpg)


(https://live.staticflickr.com/65535/50059478893_45a3f766be_b.jpg)


(https://live.staticflickr.com/65535/50060291467_80788defef_b.jpg)


(https://live.staticflickr.com/65535/50059479553_56119be464_b.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: Jock on June 29, 2020, 08:29:15 PM
I rode another 300 miles today, from Montrose, Colorado to Grants, New Mexico.  And in that ride today, I rode the Million Dollar Hwy. again.....

(https://live.staticflickr.com/65535/50059480688_7f35d183a0_b.jpg)


(https://live.staticflickr.com/65535/50059478893_45a3f766be_b.jpg)


(https://live.staticflickr.com/65535/50060291467_80788defef_b.jpg)


(https://live.staticflickr.com/65535/50059479553_56119be464_b.jpg)

Now that's livin'!
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on June 30, 2020, 06:22:58 AM
Rode 100 miles yesterday, some how with out getting rained on.  Managed to miss the rain, but not wet roads, was out doing errands.  Will hope to accomplish the same today, ride to DR and miss rain.  Getting very tired of rain every day.  Trying to figure out what changes are with the new GTS software update.
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on June 30, 2020, 12:08:14 PM
Me and a couple buddies did my favorite local ride yesterday. The Cascade Loop! Absolutely gorgeous.

https://www.google.com/maps/dir/Marysville+Washington/Winthrop,+Washington+98862/Wenatchee,+WA/Marysville,+WA/@48.086553,-120.8413517,8.52z/data=!4m36!4m35!1m10!1m1!1s0x548553b96557a771:0x72449f271b24ff0!2m2!1d-122.1770818!2d48.0517637!3m4!1m2!1d-122.1123032!2d48.1137875!3s0x5485521691d6c38b:0x4582b3351359165e!1m5!1m1!1s0x549cafa623b96aab:0x28449a3362c3528d!2m2!1d-120.1861956!2d48.4779232!1m10!1m1!1s0x549bcc43dd054f43:0x746e63024633d190!2m2!1d-120.3103494!2d47.4234599!3m4!1m2!1d-122.1070016!2d48.0068773!3s0x549aab6264fe98e7:0x31f799c731ca1466!1m5!1m1!1s0x548553b96557a771:0x72449f271b24ff0!2m2!1d-122.1770818!2d48.0517637!3e0
Title: Re: What did you do to or on your CVO today?
Post by: dayne66 on June 30, 2020, 01:06:53 PM
Me and a couple buddies did my favorite local ride yesterday. The Cascade Loop! Absolutely gorgeous.

I've rode those roads many times...just not as a loop......and you are very right.....a picturesque ride!
Title: Re: What did you do to or on your CVO today?
Post by: BigLock on July 01, 2020, 10:14:19 PM
Well made it home safe and sound from Maggie Valley tomorrow Emma Jane will get a bath from all the rain we were in .
Title: Re: What did you do to or on your CVO today?
Post by: Aussie on July 02, 2020, 02:28:36 AM
...and then wanted to ride back with me yesterday. 894.5 miles total. Pretty proud of him. He is already talking about when we can do an iron butt ride. Not bad for a ten year old. Not many his age have that under their belt.

What a great trip it would have been Howard, smiles tell it all, something the young fella will remember for a long time and doubt he will ever forget the day.   :)
Title: Re: What did you do to or on your CVO today?
Post by: Indenial on July 03, 2020, 12:06:01 PM
Howard, how neat.  Start him out young with good advice and soon he'll be riding next to you, wondering if you can keep up.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on July 11, 2020, 06:45:54 AM
Took Red Pepper for a morning 150 mile ride, its now got over 10,000 miles on the motor build from this spring.
Title: What did you do to or on your CVO today?
Post by: Bav on July 15, 2020, 07:06:19 AM
Not today but yesterday. Fitted TAB Performance 4” slip ons with Zombie baffles and took it out for a 170 mile ride through 5 of England’s shires. Definitely sounds a lot better.


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: longlast on July 17, 2020, 01:50:19 PM
Not today but yesterday. Fitted TAB Performance 4” slip ons with Zombie baffles and took it out for a 170 mile ride through 5 of England’s shires. Definitely sounds a lot better.


Sent from my iPhone using Tapatalk

Where'd you get them from?  How about a pic.
Title: Re: What did you do to or on your CVO today?
Post by: longlast on July 17, 2020, 01:54:28 PM
Installed new set of LEDs lights that arrived today.
Title: Re: What did you do to or on your CVO today?
Post by: longlast on July 17, 2020, 01:55:35 PM
Before
Title: Re: What did you do to or on your CVO today?
Post by: longlast on July 17, 2020, 01:56:25 PM
Installed
Title: Re: What did you do to or on your CVO today?
Post by: michaelokielee@yahoo.com on July 17, 2020, 02:32:40 PM
Installed

Much better, nice job :pepper:
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on July 17, 2020, 02:43:22 PM
Installed

Dude!  Those look so much better.  It's cool when things both look better AND work better.  Win-Win!
Title: Re: What did you do to or on your CVO today?
Post by: CircleRacer on July 17, 2020, 03:17:22 PM
Just look at the shine of that paint!!!

Sent from my moto z3 using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: Bav on July 17, 2020, 05:38:26 PM
Where'd you get them from?  How about a pic.
It’s a bit of a long story so get comfortable.

There is a huge choice of slip ons available in the US. Here in the UK we are quite limited as to what we get to see or hear and rely on YouTube a lot but the sound on video is never the same as in the flesh. I didn’t want to splash out a lot of cash on something that I might not like. I was drawn to TAB Performance as I could use my stock heat shields with them. I’ve had Fullsac power cores before which I loved but didn’t want to adapt my stock mufflers due to potential warranty issues. I may do in the future.

I found some used TAB mufflers on eBay in the US and got them for just over £50 ($65). They were in very good condition apart from a couple of scrapes which are not visible with the heat shields on. They were however empty (no baffles). I then got chatting to someone on a UK Harley forum who had some Zombie baffles that he no longer needed as he had swapped to the 2.5” baffles. He very kindly gave them to me FOC and I managed to pick them up from him in the wilds of Cumbria when I was on my way home from Scotland on business.

So to cut a long story short it’s a bit of a low cost experiment to see if I like them. I don’t think the chrome tips go well with my bike but TAB do a black version which I may purchase if I like them after using them for the rest of the year.

Hope that all makes sense.

I’ve tried to take a picture but there is not much to see particularly with the stock heat shields on. I have however posted a before and after video on YouTube.

https://youtu.be/OhNoMyvS8sc

(https://uploads.tapatalk-cdn.com/20200717/f32211d3cd65d9712b37f4566b0bf5d8.jpg)


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: longlast on July 17, 2020, 06:08:49 PM
Much better, nice job :pepper:

 :2vrolijk_21: :2vrolijk_21: Cheers

Dude!  Those look so much better.  It's cool when things both look better AND work better.  Win-Win!

They do don't they,.....and I can't agree with you more on that one Don


Just look at the shine of that paint!!!

Sent from my moto z3 using Tapatalk



 :2vrolijk_21: :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: longlast on July 17, 2020, 06:27:12 PM
It’s a bit of a long story so get comfortable.

There is a huge choice of slip ons available in the US. Here in the UK we are quite limited as to what we get to see or hear and rely on YouTube a lot but the sound on video is never the same as in the flesh. I didn’t want to splash out a lot of cash on something that I might not like. I was drawn to TAB Performance as I could use my stock heat shields with them. I’ve had Fullsac power cores before which I loved but didn’t want to adapt my stock mufflers due to potential warranty issues. I may do in the future.

I found some used TAB mufflers on eBay in the US and got them for just over £50 ($65). They were in very good condition apart from a couple of scrapes which are not visible with the heat shields on. They were however empty (no baffles). I then got chatting to someone on a UK Harley forum who had some Zombie baffles that he no longer needed as he had swapped to the 2.5” baffles. He very kindly gave them to me FOC and I managed to pick them up from him in the wilds of Cumbria when I was on my way home from Scotland on business.

So to cut a long story short it’s a bit of a low cost experiment to see if I like them. I don’t think the chrome tips go well with my bike but TAB do a black version which I may purchase if I like them after using them for the rest of the year.

Hope that all makes sense.

I’ve tried to take a picture but there is not much to see particularly with the stock heat shields on. I have however posted a before and after video on YouTube.

https://youtu.be/OhNoMyvS8sc

(https://uploads.tapatalk-cdn.com/20200717/f32211d3cd65d9712b37f4566b0bf5d8.jpg)


Sent from my iPhone using Tapatalk

You've got to love it when things fall into place. Like you said it's hard to get an accurate assessment from a video compared to standing there but they do have depth to them and they do beat the stock.  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on July 18, 2020, 11:45:44 AM
Huge difference in sound, much deeper. I have heard from more than one source that you are able to use your stock Defiance tips on your TAB mufflers. That would resolve the tip issue. Nice job!
Title: Re: What did you do to or on your CVO today?
Post by: Bav on July 18, 2020, 02:37:11 PM
Huge difference in sound, much deeper. I have heard from more than one source that you are able to use your stock Defiance tips on your TAB mufflers. That would resolve the tip issue. Nice job!
Thanks man. I did wonder but they don’t want to come off easily. I’ll persevere with some WD40.


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on July 18, 2020, 03:00:41 PM
And a rubber mallet. LOL
Title: Re: What did you do to or on your CVO today?
Post by: Bav on July 18, 2020, 05:19:48 PM
And a rubber mallet. LOL
I’ll give it a try tomorrow but it may end up looking like the TAB one if I’m too heavy handed LOL

(https://uploads.tapatalk-cdn.com/20200718/618c241707fd1bb9424d34d5768cfee5.jpg)


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Aussie on July 19, 2020, 04:32:04 AM
Installed
Installed the same set on my SG, 100% better than the stock Head light plus the passing lamps have a wider and brighter beam.
Title: Re: What did you do to or on your CVO today?
Post by: 09nessrg on July 19, 2020, 11:13:56 AM
What brand are those LED lights?
Title: Re: What did you do to or on your CVO today?
Post by: Aussie on July 19, 2020, 07:32:03 PM
What brand are those LED lights?

Got them from Led Factory Mart, at first I was sceptical but thought for under $200 delivered I would give them a go.
They are good to deal with, as for the quality of lights I have nothing to complain about.

https://www.ledfactorymart.com/products/7inch-led-headlight-4-5inch-fog-passing-lights-for-harley-w-bracket-ring

Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on July 19, 2020, 08:19:56 PM
Replaced 2 front rotors again on the 19 cvorg.   2nd time under warranty. At the same time I had the tire sensor replaced also. These parts just don't last.  In fact they really suck. Bike just turned 10k miles. Just saying. Stuart. 😩
Title: Re: What did you do to or on your CVO today?
Post by: Bobs14Limited on July 19, 2020, 08:50:51 PM
Installed new set of LEDs lights that arrived today.


Big question is, do they have the dark area when leaning into a turn at night? Bet it does. The stock Harley daymaker certainly does. Only the Harley adaptive daymaker does a proper job. But it is pricey.
Title: Re: What did you do to or on your CVO today?
Post by: Madmanmike on July 20, 2020, 04:20:31 PM
Wisamic LED headlight, Amazon.
Eagle Lights LED front and back turns, from manufacturer.
Custom Dynamics taillight, new, from eBay seller.
Custom Dynamics Smart Triple Play load equalizer/run/brake/turn/flasher. New, eBay.

Simple install, but so effective.
Title: Re: What did you do to or on your CVO today?
Post by: longlast on July 20, 2020, 04:23:48 PM
Installed the same set on my SG, 100% better than the stock Head light plus the passing lamps have a wider and brighter beam.

They look really good on you bike they give the front a higher quality look :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on July 22, 2020, 08:47:07 PM
Installed my new plate... it’s official
Title: Re: What did you do to or on your CVO today?
Post by: OBB on July 22, 2020, 09:17:12 PM
Installed my new plate... it’s official
Good one  :2vrolijk_21: :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Triple X on July 24, 2020, 10:06:26 PM
Upgraded my 2018 CVO Limited to the 2020 oil pump and added a torque cam while in there.
Title: Re: What did you do to or on your CVO today?
Post by: Triple X on July 24, 2020, 10:07:43 PM
Installed my new plate... it’s official
What flag mounts are those?
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on July 24, 2020, 10:29:34 PM
What flag mounts are those?
Pro Pad.com
Title: Re: What did you do to or on your CVO today?
Post by: iski on July 25, 2020, 06:35:31 AM
On Saturdays the CVO is a donut & apple fritter getter.  Nice mostly shady 100 mile loop run to a little meat market/donut bakery.  Usually 6-10 of us make the ride. 
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on July 25, 2020, 06:52:54 AM
Been having rain and storms the last two days, but managed to get the Red Pepper Washed.  Raining now, maybe between storms I can was the King.  I'd rather be riding
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on July 25, 2020, 11:12:18 AM
Installed Lyndall Gold Plus brake pads on the front of my bike.
Title: Re: What did you do to or on your CVO today?
Post by: Triple X on July 26, 2020, 09:24:27 PM
Pro Pad.com
Thanks!
Title: Re: What did you do to or on your CVO today?
Post by: Bav on July 31, 2020, 06:59:49 AM
Went to visit my mother in Buckinghamshire about 150 mile round trip. About 90 degrees F over here in the U.K. Kept off the highways to enjoy some more technical back roads. Damn this thing needs better shocks!! Either that or they need readjusting to take into account the lockdown weight gain

(https://uploads.tapatalk-cdn.com/20200731/ef1b1d171cb2d9e6baa3cb18d75c17ed.jpg)


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on August 01, 2020, 07:59:47 AM
Moved both CVO bike so I could get my 2003 Fatboy out of Garage to clean it up and get it going.  Its been two years since I rode it. 

Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on August 01, 2020, 03:58:14 PM
We have a hurricane on the way.  Not a day for much around here. 😣☹️😩
Title: Re: What did you do to or on your CVO today?
Post by: Robmay on August 01, 2020, 05:19:05 PM
Just downgraded to a tropical storm Stu. Get out and ride!


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on August 01, 2020, 05:52:10 PM
Great news.  I'll back out the bike. 🤔
Title: Re: What did you do to or on your CVO today?
Post by: BigLock on August 02, 2020, 07:30:28 AM
Rode up to Maggie Valley for about 6 days
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on August 03, 2020, 06:24:11 AM
Put a 130 miles on the CVO King.  Still get complements on that bike.  SMHD was packed on Sunday.
Title: Re: What did you do to or on your CVO today?
Post by: BigLock on August 03, 2020, 07:26:51 AM
Must have just missed you Dave I was at SMHD around 12:30 until 2 . Had some lunch at the shed then headed over the Cherohala then back to Maggie Valley about 270 miles round.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on August 04, 2020, 06:19:29 AM
Must have just missed you Dave I was at SMHD around 12:30 until 2 . Had some lunch at the shed then headed over the Cherohala then back to Maggie Valley about 270 miles round.
I was sitting at a High top table right out side the Shed glass doors by the game on the wall with two other guys having a cigar.  Got there about 12:30 and left at 2.:30  Sorry we missed each other, one of the other guys, Joe is on this forum also.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on August 10, 2020, 06:25:04 AM
Getting Red Pepper packed for our trip today.  Have a Dr appointment early afternoon we will ride to.  Then we will ride east a couple hundred miles.  Then in Outer Banks area for a few nights. 
Title: Re: What did you do to or on your CVO today?
Post by: USA88 on August 13, 2020, 07:01:22 PM
I purchased legend suspension for the front and rear.
Drove over railroad tracks and got bucked off the seat for the last time on stock suspension
Once they are installed I’ll let you know my opinions.
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on August 16, 2020, 06:57:16 PM
Friday rolled 51k on the clock, wore out shifter linkage and broke the jiffy stand in North Dakota, lucky me I was 4 miles away from Black Magic HD and was back on the road in an hour. Now have to give it a bath
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on August 16, 2020, 07:18:38 PM
My Road King's kickstand spring was discovered to have erectile dysfunction this afternoon.  It was a little limp.  Fortunately a spare was here in my parts pile.  All good :2vrolijk_21: .
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on August 19, 2020, 07:35:16 AM
Rode the Red Pepper to the DR than over to SMHD for the 35K service with 36K on the bike.  They replaced trim ring around gas cap under warranty.  They are trying to get me a second seat due to wear under warranty again, seat seems to last 15K miles.  Rotor while warped are in Harley specs.  They are ordering rotors as they know they will get out of spec.  These with be the 4th new rotors put on bike. 
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on August 19, 2020, 08:19:02 PM
I bought a new trim ring yesterday.  $10.00.  I didn't think that it was covered. Mine looked worn out.  On my 16 i had to replace the highway peg brackets.  They constantly turn to crap in time. Stuart.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on August 27, 2020, 06:26:12 AM
Rode the Red Pepper to Chattanooga to get the cracked screen on my iPhone replaced.  Got there and after running diagnostics on my phone they said rear camera was failing and facial recognition did not work.  I though once screen replaced facial would work but he said no.  it would be 200 more to replace phone than screen.  So I had to ride home, back iPhone up to computer.  Then ride back to Chattanooga.  Got new iPhone and rode home.  Put 271 miles on the bike.  Nice to ride and not get rained on or sprinkled on at all. 

Today I will pair new phone with the bike.  Then I'll ride to Knoxville for a couple things.  Then later over to SMHD to visit with a friend and HOG meeting. 
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on September 04, 2020, 01:02:13 PM
After 2 1/2 years and a little over 37K I decided to flush and replace the DOT 4 in all 3 holes. All looked okay but the brakes feel much better now.
Title: Re: What did you do to or on your CVO today?
Post by: dayne66 on September 04, 2020, 03:32:11 PM
Called the dealer...still waiting on a new primary chain. They have the new compensator(5th) and tensioner. They are thinking that the chain and/or tensioner are eating compensators.

I guess my 10 day Okanagan  MOTORCYCLE vacation will be in the Jeep!


Title: Re: What did you do to or on your CVO today?
Post by: Grizzly on September 05, 2020, 02:48:45 PM
Possibly they'll give a good customer like you a loaner to do your trip with?   :nixweiss:

Doesn't hurt to ask... Give 'em a chance to say no.

Ya never know till you ask.

Either way, have a great time.

Stay safe, healthy & sane!


With the expectations of the border remaining closed for sometime yet, we are considering renting a house in Osoyoos this winter.
Title: Re: What did you do to or on your CVO today?
Post by: Andreas Larsson on September 05, 2020, 04:45:45 PM
Thought I’d ride to work but when I got outside, saw the dark skies in the horizon, I went inside and took the car keys instead. I was not so fond of the idea getting the bike dirty since I washed it, dried it and waxed it the other day.
Tomorrow the forecast says rain all day
Title: Re: What did you do to or on your CVO today?
Post by: OBB on September 05, 2020, 04:47:51 PM
Thought I’d ride to work but when I got outside, saw the dark skies in the horizon, I went inside and took the car keys instead. I was not so fond of the idea getting the bike dirty since I washed it, dried it and waxed it the other day.
Tomorrow the forecast says rain all day
Know that feeling all too well.

Sent from my boring Droid phone.

Title: Re: What did you do to or on your CVO today?
Post by: scotman623 on September 05, 2020, 08:49:41 PM
Changed my trans fluid because my new Baker Grudge box has about 1000 miles on it now... Redline Shockproof is my brand of choice...
Title: Re: What did you do to or on your CVO today?
Post by: BigLock on September 05, 2020, 10:09:50 PM
I hadn't rode my 12 CVO RG in about 3 months. So today I   rode it up to Roanoke Rapids NC then up into VA.Then cut across to Danville then back down home around trip little over 500 miles. Last 3 months I had been on my 18 riding up to Maggie Valley and East Tennessee. So today I showed Brownie some love too.
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on September 05, 2020, 10:26:47 PM
I hadn't rode my 12 CVO RG in about 3 months. So today I   rode it up to Roanoke Rapids NC then up into VA.Then cut across to Danville then back down home around trip little over 500 miles. Last 3 months I had been on my 18 riding up to Maggie Valley and East Tennessee. So today I showed Brownie some love too.
You have the Maple?
Title: Re: What did you do to or on your CVO today?
Post by: BigLock on September 06, 2020, 08:03:39 AM
Yep call her Brownie one sweet lady.
Title: Re: What did you do to or on your CVO today?
Post by: martys on September 06, 2020, 09:37:13 AM
Sold my 2000 Triple Red, only had it out twice this summer, total of 300 km (185 mi) .  Combination of bad knees and a sick feeling in my gut due to my Best Bud having someone turn left into him last summer, and he is still recovering, two surgeries, memory loss and a permanent stutter.  Made me evaluate my priorities.


Marty
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on September 06, 2020, 11:45:20 PM
Yep call her Brownie one sweet lady.
Yep. I do as well-love it!
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on September 07, 2020, 06:57:58 AM
Rode Red Pepper, and noticed I need to order a new back tire.  I'll be doing that today.
Title: Re: What did you do to or on your CVO today?
Post by: HOGMIKE on September 07, 2020, 09:35:22 AM
Rode Red Pepper, and noticed I need to order a new back tire.  I'll be doing that today.

Road the green bike, also noticed the rear tire on the wear bars, and the front also needs replacing.
It wasn’t handling like it used to.
Tires are on the way, I’ll do both, check brakes, bearings etc, while on the lift.
 8)
Title: Re: What did you do to or on your CVO today?
Post by: Grizzly on September 07, 2020, 03:48:46 PM
Sold my 2000 Triple Red, only had it out twice this summer, total of 300 km (185 mi) .  Combination of bad knees and a sick feeling in my gut due to my Best Bud having someone turn left into him last summer, and he is still recovering, two surgeries, memory loss and a permanent stutter.  Made me evaluate my priorities.


Marty

Hey Marty,

Completely understand where you're coming from... It is tough enough to ride with bad knees, but having a friend fight his/her way through a recovery from a motorcycle accident makes it really tough to enjoy the ride.  All the very best for your next chapter in your life.

From all what I've read over the years on this site, there will be many who will miss a couple of classics on the road and this site, which I hope you stay involved with every now and then.

All the best,
Mike

Title: Re: What did you do to or on your CVO today?
Post by: martys on September 07, 2020, 10:38:10 PM
Hey Marty,

Completely understand where you're coming from... It is tough enough to ride with bad knees, but having a friend fight his/her way through a recovery from a motorcycle accident makes it really tough to enjoy the ride.  All the very best for your next chapter in your life.

From all what I've read over the years on this site, there will be many who will miss a couple of classics on the road and this site, which I hope you stay involved with every now and then.

All the best,
Mike
Thanks Mike, I will keep in touch on here as I have made many friends over the years on here and you are all a part of my life now.  We have moved to a new adventure in the purchase of a boat, so hopefully Lake Erie will treat us nice and we will find some relaxing time on it.

Marty
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on September 08, 2020, 07:42:18 AM
Road the green bike, also noticed the rear tire on the wear bars, and the front also needs replacing.
It wasn’t handling like it used to.
Tires are on the way, I’ll do both, check brakes, bearings etc, while on the lift.
 8)
While ordering the tire for Red Pepper I noticed the 13 King need new rear tire, and front was close.  So wallet is empty now
Title: Re: What did you do to or on your CVO today?
Post by: Grizzly on September 08, 2020, 12:42:20 PM
Thanks Mike, I will keep in touch on here as I have made many friends over the years on here and you are all a part of my life now.  We have moved to a new adventure in the purchase of a boat, so hopefully Lake Erie will treat us nice and we will find some relaxing time on it.

Marty

A man after my own heart... I've always said when I get tired of riding or having to look at a trike, I'll buy a boat!

Wishing Captain Marty and his First Mate calm seas ahead.   :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: HOGMIKE on September 09, 2020, 08:23:03 AM
Road the green bike, also noticed the rear tire on the wear bars, and the front also needs replacing.
It wasn’t handling like it used to.
Tires are on the way, I’ll do both, check brakes, bearings etc, while on the lift.
 8)

Tires showed up yesterday, looks like I’ll spend some time changing them out.
Gotta stay home today anyway for chores, I’ll get to break in the tires tomorrow. :orange:

Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on September 11, 2020, 08:06:02 AM
Rode the CVO King 161 miles yesterday, 300 yards from my Driveway I hit a deer.  I did not go down, but some how hurt my left big toe pretty bad.  Its killing me this AM.  It appears only damage to bike is front fender.  Will have dealer check to make sure forks and frame not bent.  Second deer I have hit on my way home, last one was 3 miles from home turning onto the street I hit this deer on. 
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on September 11, 2020, 08:07:23 AM
other side of front fender. 
Title: Re: What did you do to or on your CVO today?
Post by: Madmanmike on September 11, 2020, 12:34:32 PM
Ends Cuoio arrived today.

Title: Re: What did you do to or on your CVO today?
Post by: scotman623 on September 11, 2020, 02:40:19 PM
Dave, Very sorry to hear this my friend!!! Hopefully the toe heals up quickly... Keep us updated on bike damage and how you’re feeling 🤝
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on September 16, 2020, 05:54:25 AM
Last night replaced the Dunlap Elite with 12,500 miles on it on the red pepper.  I think I got all the use possible out of it.



Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on September 16, 2020, 05:56:07 AM
New Dunlop Elite Rides much better.  Today, we will change a rear rocker box seal that has a slight oil leak.  15,000 miles on the build.

Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on September 16, 2020, 06:36:12 AM
Hey Dave. You sure got your money's worth out of that tire.  ::). Stuart
Title: Re: What did you do to or on your CVO today?
Post by: dayne66 on September 17, 2020, 01:04:08 AM
Waited....for Barne's to call......apparemtly no primary chains in captivity!
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on September 17, 2020, 07:33:32 AM
I ordered the new front fender for the 2013 CVO King.  A bit pricey, at 1100 dollars, but glad it can still be bought.  Dang deer was expensive, didn't want an insurance claim.

Replaced Rocker box gaskets on the 2019 CVO also.
Title: Re: What did you do to or on your CVO today?
Post by: Davestune on September 17, 2020, 11:01:29 PM
stage 2 heads, tman cam,  58mm t body. injectors, remap, D D fatcat 2 into 1  bumped compression up 10.6   bore to 113.   lock up clutch
  132hp 134 torque
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on September 18, 2020, 12:15:16 PM
Modified my Ventilator A/C and added speaker pods to my lowers and got rid of those fugly glove boxes.

Title: Re: What did you do to or on your CVO today?
Post by: scotman623 on September 18, 2020, 04:39:58 PM
Rayson!! Awesome job... Bike looks great my friend.
Title: Re: What did you do to or on your CVO today?
Post by: CVODON on September 18, 2020, 05:02:25 PM
I ordered the new front fender for the 2013 CVO King.  A bit pricey, at 1100 dollars, but glad it can still be bought.  Dang deer was expensive, didn't want an insurance claim.

Replaced Rocker box gaskets on the 2019 CVO also.
Deer impact is Comprehensive, Not a preventable loss, Why no claim? I know you have insurance. I know older people, honestly, with 20+ Comp claims on their policy and we never cared. Just curious. Really never much more notice than a towing claim.
Title: Re: What did you do to or on your CVO today?
Post by: Davestune on September 19, 2020, 07:02:16 PM
I pinned my needle today, sux they stop at 120
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on September 19, 2020, 10:18:02 PM
Today the old Road Glide went for a ride.  400-ish miles on as close to a perfect day as you could hope for.  Low 70s and mostly sunny.  Light breeze.  Just great.  Bike is still running awesome after its winter engine work.  The dark red and diamond cut cylinders and heads look almost as good as they're running now.  Sounds great and runs sweet.

Vroom vroom....  :drink:
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on September 19, 2020, 10:41:47 PM
Nice to hear Don.  Nice to keep the older rides in our hearts. Stuart  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on September 21, 2020, 07:15:13 AM
Deer impact is Comprehensive, Not a preventable loss, Why no claim? I know you have insurance. I know older people, honestly, with 20+ Comp claims on their policy and we never cared. Just curious. Really never much more notice than a towing claim.

Two very big claims in past two years.  My wife totaled a 17 Road Glide special, at 35K with the custom paint we had on it.  Not her fault, Trucking company was found to be at fault.  Insurance co got re-embursed for bike and medical, had no payout.  Had a lady on cell phone do a hit and run on me. 14K damage to bike.

We were dropped by our insurance company of 10 years, determined to be to high risk.  Even though police report from hers listed truck drivers very at fault and mine as hit and run, with two witness. 

So less then 6 months with new company.  Not chancing it.
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on September 21, 2020, 05:49:42 PM
HIGH RISK.... that was the name of my last boat, dont ask why lol, them insurance companies can be a lill funny about things sometimes
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on September 22, 2020, 06:32:46 AM
Rode the 19 Red Pepper to Chemo, then a 100 mile ride after to clear my head.

Will be doing the exact same today.  Then when I get home, I'll pack the bike for our trip to FL, leaving early Wednesday morning to be home Sunday night.
Title: Re: What did you do to or on your CVO today?
Post by: TN on September 22, 2020, 07:28:05 AM
Last week

Forgot my plug, be sure to visit J&B Performance in Mohawk TN for all your tuning needs and Harley wants.   :orange:
Title: Re: What did you do to or on your CVO today?
Post by: Robmay on September 22, 2020, 11:08:11 AM
That don’t look like Docs Phil.


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on September 22, 2020, 11:45:08 AM
Rode the 19 Red Pepper to Chemo, then a 100 mile ride after to clear my head.

Will be doing the exact same today.  Then when I get home, I'll pack the bike for our trip to FL, leaving early Wednesday morning to be home Sunday night.



Sorry to hear that you are dealing with cancer Dave. Here's hoping for a quick and thorough recovery!  :drink:
Title: Re: What did you do to or on your CVO today?
Post by: TN on September 22, 2020, 12:43:21 PM
That don’t look like Docs Phil.


Sent from my iPhone using Tapatalk

Really Rob :drink:  I ain't gonna say a thing...............or will I

matter of fact you were  there durning "the episode", give your review  :drink:
Title: Re: What did you do to or on your CVO today?
Post by: Robmay on September 22, 2020, 01:18:01 PM
All I can say is your bike looks the same.


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on September 22, 2020, 07:37:13 PM
Last week

Forgot my plug, be sure to visit J&B Performance in Mohawk TN for all your tuning needs and Harley wants.   :orange:
Brandon and Justin do a great job. It's nice to have someone in our area that know how to tune. David and I have used them for our recent builds on our TCs and M8s.

Sent from my SM-N975U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on September 23, 2020, 05:53:29 AM
Like Joe said, Brandon did q great job with out Twin Cam tuns.  He has also done a good job with the M8.  They run great.

Getting ready to ride to FL, leaving in an hour. 
Title: Re: What did you do to or on your CVO today?
Post by: kojak on September 23, 2020, 06:58:25 AM
other side of front fender.
Just saw this, sorry to hear about your accident. Glad you’re ok, frigging deer are all over the place in early fall. Got a resident herd on my property in the woods.
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on September 23, 2020, 09:00:38 AM
Another plug for Brandon and Justin. Fine fellers
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on September 23, 2020, 07:15:06 PM
Night riding .... checking out the new CD lighting
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on September 23, 2020, 07:16:53 PM
Rear HD stuff
Title: Re: What did you do to or on your CVO today?
Post by: OBB on September 23, 2020, 10:16:10 PM
Rear HD stuff
You keep squishing the photos, we'll have to start calling you fatfreddy
Title: Re: What did you do to or on your CVO today?
Post by: dayne66 on September 23, 2020, 11:55:35 PM
Talked to the dealer.....primary drive chain finally came in and it along with a new tensioner and compensator #5 were installed. When they started it they heard other 'noises' that were masked by the sound of the failing compensator ....now......they're opening the cam chest and top end.......70,000 km on a '12 with about $16,ooo of esp work done so far. At least they hear the 'not-normal' noises that I've been telling them about for the last 1.5 years since the rebuild.

Trade for a what?
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on September 24, 2020, 08:20:44 AM
You keep squishing the photos, we'll have to start calling you fatfreddy
you will have that with the aging male.  :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on September 24, 2020, 08:46:11 AM
Talked to the dealer.....primary drive chain finally came in and it along with a new tensioner and compensator #5 were installed. When they started it they heard other 'noises' that were masked by the sound of the failing compensator ....now......they're opening the cam chest and top end.......70,000 km on a '12 with about $16,ooo of esp work done so far. At least they hear the 'not-normal' noises that I've been telling them about for the last 1.5 years since the rebuild.

Trade for a what?

I still miss my '12 Ruby, Dayne (and still one of Vickie's favorite bikes we've had).  Still, and except for the color, I'm glad I'm out of it for these type reasons you are having.  Beautiful is great unless you can't ride it or get it out of the service dept.  You've done well mileage wise but $16K of motor work so far (canadian $ or US $) is a bunch.  When the ESP runs out or they stop covering, what then?

Trade for what, you ask?  I would suggest moving brands but that may not be where you want to go.  Without extrapolating further on a CVO site, moving was the best thing I did.  One of the first things Vickie said after we rode the new bike..."Why didn't we do this sooner?"

There are trade-offs on any brand.  Nobody has the perfect motorcycle.  You have a beauty and except for the '12 Skunk color combo, the Ruby/Typhoon is my second favorite CVO color combo. 

Keep it between the ditches... :bananarock:
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on September 24, 2020, 06:13:45 PM
You keep squishing the photos, we'll have to start calling you fatfreddy
hey did tell you my bike rolled 50k miles last month  :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: OBB on September 24, 2020, 08:22:20 PM
hey did tell you my bike rolled 50k miles last month  :nixweiss:
You blew by me. I just rolled 43k on mine. Having a 2nd bike now does keep the miles down on the '15.

Sent from my boring Droid phone.

Title: Re: What did you do to or on your CVO today?
Post by: TN on September 26, 2020, 10:55:32 PM
Downtown Savannah..... :drink:

Title: Re: What did you do to or on your CVO today?
Post by: TN on September 30, 2020, 06:24:46 AM
CVO??

Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on September 30, 2020, 12:19:20 PM
CVO??
:2vrolijk_21: I like that... not sure I could get all my legs in there, and if I could if I could go far. :huepfenlol2:

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on September 30, 2020, 06:27:08 PM
CVO??


Carburated Vehicle - Open wheel ?????
Title: Re: What did you do to or on your CVO today?
Post by: TN on October 01, 2020, 06:29:30 AM
:2vrolijk_21: I like that... not sure I could get all my legs in there, and if I could if I could go far. :huepfenlol2:

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:

I'm betting you would not fit, it's like it's made for little people. Something about driving it puts a smile on your face.  :drink:
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on October 01, 2020, 11:17:55 AM
I'm betting you would not fit, it's like it's made for little people. Something about driving it puts a smile on your face.  :drink:
I bet it is fun to drive... lightweight car w/a lot of HP... vroom, vroom. ;D

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: dayne66 on October 01, 2020, 11:29:28 AM
I waited on my CVO today!
Title: Re: What did you do to or on your CVO today?
Post by: longlast on October 01, 2020, 01:40:27 PM
Set the bike up for its 5k oil change and going to pull the primary cover to check all the primary drive.
This will be it's 30k oil change. The last 5k has been with ATF in the primary

Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on October 01, 2020, 05:04:24 PM
40K service. Good to go for the next 5K!
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on October 01, 2020, 08:47:20 PM
I just ordered a GTS head unit and everything necessary to add speakers and amp for the lowers. Also ordered the SE 55mm aluminum intake and 5.5 injectors.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on October 02, 2020, 08:04:59 AM
Installed new Dunlop American Elite Tires front and Rear on the CVO King.  Made an Appointment for Monday to have the 40K service done on the 19 Red Pepper. 
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on October 04, 2020, 07:05:48 AM
Rolled over 40,000 miles on the 19 Red Pepper, it will be 2 years old Dec 24th.  It also spent three months in the dealer after I was hit by a lady on a cell phone.

Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on October 04, 2020, 10:16:21 AM
Rolled over 40,000 miles on the 19 Red Pepper, it will be 2 years old Dec 24th.  It also spent three months in the dealer after I was hit by a lady on a cell phone.
   :2vrolijk_21:  HD needs you for "REAL WORLD TEST MILAGE PROGRAM"
Title: Re: What did you do to or on your CVO today?
Post by: Unbalanced on October 04, 2020, 03:26:58 PM
Replaced the water pump and the sensor on the 15 SESG with the upgraded kit

And

Finished installing the motor in the 11 SESG, replaced the isolators and motor mounts, added an extra plate to the compensator, now to tune it after break in miles
Title: Re: What did you do to or on your CVO today?
Post by: glinkmeyer on October 04, 2020, 03:42:56 PM
Picked up my 19 CVO Magnetic Fade Gray Limited from the dealership after having my Cam, cam plate, new upgraded oil pump and lifters replaced. Seems like they are still using the cheap china made lifters as it was a lifter failure and caught early. The bike had 35,000 miles on a completely stock engine. At least it was still under factory warranty by three weeks so at no cost to me. Now heading to Biketoberfest.


Sent from my iPad using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: KGB on October 04, 2020, 04:20:59 PM
Picked up my 19 CVO Magnetic Fade Gray Limited from the dealership after having my Cam, cam plate, new upgraded oil pump and lifters replaced. Seems like they are still using the cheap china made lifters as it was a lifter failure and caught early. The bike had 35,000 miles on a completely stock engine. At least it was still under factory warranty by three weeks so at no cost to me. Now heading to Biketoberfest.


Sent from my iPad using Tapatalk

Glade they finally got it finished for you! Have fun in Florida
Title: Re: What did you do to or on your CVO today?
Post by: KGB on October 04, 2020, 07:55:47 PM
CVO??

It reminds me of Ed Roth Rat Fink

Title: Re: What did you do to or on your CVO today?
Post by: TNCarters on October 06, 2020, 06:18:08 PM
Water pump finally died on my 2015 RGU at 39,000 miles.  Getting it replaced this week with the updated kit.  I knew it was about due from other postings.  Little like the 2015 lifters, they all fail sooner than they should.
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on October 06, 2020, 07:40:16 PM
water pump ..... i have to get that on my to do list, 52k on the original. 
Title: Re: What did you do to or on your CVO today?
Post by: Unbalanced on October 06, 2020, 08:22:19 PM
If your not under warranty before upgrading you might consider taking it off and cleaning the internals.  Mine works fine now that the impeller is unobstructed.   Should of done this before upgrading would have saved 380 dollars on the upgraded one.

If you do the work yourself, when you go to put the cover back on be sure to line it up and push evenly, it’s easy to pop the grommets out
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on October 07, 2020, 06:40:26 AM
In the process of packing my Red Pepper.  Riding with my wife and a friend to Eureka Springs AR for a long week end.  Second trip there this year.
Title: Re: What did you do to or on your CVO today?
Post by: TN on October 12, 2020, 06:37:21 AM
Rode thru potential thunderstorms, 85 degree heat and Sunday drivers to fetch pralines for my lovely bride, she’s lucky to have me.


Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on October 12, 2020, 06:50:18 AM
Rode Home from Eureka Springs on Sunday.  Took 412 across AR and a short bit of MO.  Got on I-40 in Jackson TN.  Great ride, with temps in very low 70's until east of Nashville, then we had 60 or so miles of Rain, and fog between Cookville and Crossville .

Great couple days riding the Pig Trail and other great roads in AR.
Title: Re: What did you do to or on your CVO today?
Post by: dayne66 on October 12, 2020, 11:00:17 AM
Waiting some more.....tomorrow will be 2 months in the shop!
Title: Re: What did you do to or on your CVO today?
Post by: longlast on October 12, 2020, 09:27:51 PM
First crank start up test run today  ;D after completing, primary case removal for inspection all good, exhaust removal for removal of cam body for inspection of cam chain tensioners all good and all oils changed. No leaks  ;D

Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on October 13, 2020, 06:25:49 AM
Will ride the CVO King to the DR this am.  Then this afternoon to closing on my homes refinance for a lower interest rate.
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on October 14, 2020, 05:21:13 PM
Recently installed a cerakoted decatted header on the bike to replace the regular decatted header I had been running. When I decatted the original I cut out the backside to remove the cat and did not think about the fact I could have done the front side and the heat shield would cover it. Oh well wanted to do the cerakote inside and out anyway.
Still burning the header out so to speak so I rode down to the Back of the Dragon store to get a khalessi burger but the friggin food truck was not open. Oh well

Sonic here I come.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on October 18, 2020, 07:06:38 AM
Yesterday morning, I replaced the dented and twisted front fender from the deer I hit September 11th on the CVO Road King.  Was shocked it came in so fast, less than four weeks.  Yet two months waiting and no new rotors for the 19 CVO.

Fender is on, looks great so I rode it 160 mile yesterday.  Colors are starting to get good.

Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on October 19, 2020, 12:49:03 AM
Bike out of warranty in 3 weeks so yesterday made my appointment to put on TTS, Fullsac and get it tuned. Will see what this HD 131 kit will really do (or not)
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on October 19, 2020, 06:36:55 AM
Bike out of warranty in 3 weeks so yesterday made my appointment to put on TTS, Fullsac and get it tuned. Will see what this HD 131 kit will really do (or not)
I think it will pick up a good amount of Torque and HP.  The Fullsac MX headpipe does a very good job on big M8 motors. 
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on October 20, 2020, 01:05:59 AM
I think it will pick up a good amount of Torque and HP.  The Fullsac MX headpipe does a very good job on big M8 motors.
Thanks Dave, looking forward to it with high hopes!
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on October 20, 2020, 07:12:26 AM
Moonshine Harley davidson has lots of videos on You-tube about M8 exhaust and cams and other upgrades.  Most are very informative.  I already had the Fullsac MX head pipe prior to the video.  Very good comparison of it to the D&D 2 into 1 Billet cat which is one of the very best for the M8.  Fullsac holds it own for sure, and is not near as loud which for me is big, I ride my bike a lot, over 20K on this bike this year.
Title: Re: What did you do to or on your CVO today?
Post by: kevin_n on November 08, 2020, 07:12:19 PM
Filled it with gas, put some stabil in, washed it, and covered it for it's long winters nap.  :-\
Title: Re: What did you do to or on your CVO today?
Post by: longlast on November 10, 2020, 10:01:40 AM


Engine light suddenly kept coming on with the code 1475 (Exhaust actuation position error) I'd clear it but shortly after it would return.
Removed the AEA (Active Exhaust  Actuator)  "what a performance pulling that unit out.

Found the outer cable housing had popped out of the cable fastener. After a good cleaning and lubrication to the cable and the active exhaust valve actuator
All's working freely now just the mater of reinstalling and a test run ,.....fingers crossed that was the problem.
Title: Re: What did you do to or on your CVO today?
Post by: acevtwin on November 10, 2020, 10:09:14 AM
Filled it with gas, put some stabil in, washed it, and covered it for it's long winters nap.  :-\
The Same here. It's a sad day....
Title: Re: What did you do to or on your CVO today?
Post by: Ta2dResqr on November 18, 2020, 07:36:05 AM
I have a 2018 FLHXSE. I installed a Fuel Moto Jackpot XXX headpipe (allows use of the original factory heat shields) ceramic coated (HTC, best I can tell, it is Canada's retailer of Jet-Hot). I ordered a set of CVO mufflers off Ebay so I can keep my originals. I removed the baffles and put FullSac 2.0 cores in with TechMat. I installed a Fuel Moto modified High Flow K&N intake (claims 80% increased flow). This uses the stock cover with a new filter and backing plate. Installed a ThunderMax tuner with base map. Finally, I installed a Fueling vented dipstick. I noticed a fair amount (imo) of oil in the stock filter when I swapped the intakes. I am hoping this will help with that issue. I put about 50 miles on this new setup. It feels healthy and I am hoping it will get better as it dials in. Bike is still pretty quiet (coming from someone that rides a ThunderHeader on their other bike).
Title: Re: What did you do to or on your CVO today?
Post by: TN on November 18, 2020, 10:02:13 PM
Just rode 

Title: Re: What did you do to or on your CVO today?
Post by: timo482 on November 19, 2020, 10:17:13 PM
to longlast.. what does the exhaust actuation.... whatever do? i have no idea
Title: Re: What did you do to or on your CVO today?
Post by: Mr D on November 23, 2020, 10:33:48 PM
Just rode

Loved that color combo
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on December 10, 2020, 10:12:29 AM
60 in December , in lowa .... rode it  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: scotman623 on December 10, 2020, 03:19:51 PM
Dropped my bike off yesterday at my motor builder for chain drive conversion... After blowing through 3 belts, My riding style!!! I needed to make the switch... I’m also having him Put Kraus Tbars with Gauge relocation on it... Front fat tire kit too... My bike will be ready for Daytona this March..
Title: Re: What did you do to or on your CVO today?
Post by: OBB on December 10, 2020, 04:32:34 PM
Dropped my bike off yesterday at my motor builder for chain drive conversion... After blowing through 3 belts, My riding style!!! I needed to make the switch... I’m also having him Put Kraus Tbars with Gauge relocation on it... Front fat tire kit too... My bike will be ready for Daytona this March..
Can't wait to see those pix.

Sent from my boring Droid phone.

Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on December 11, 2020, 07:32:35 AM
I too will be interested in seeing pictures when your done with the fat front tire and bars.

Thats a lot of snapped belts.....
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on December 11, 2020, 11:39:38 PM
Warranty up couple weeks ago so time for Fulsac header, TTS and professional tune tomorrow!
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on December 12, 2020, 12:15:21 AM
Mine too.  I was just thinking about the same thing. 👍Stuart
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on December 12, 2020, 10:58:45 PM
Super happy with the results, completely different bike! wish I would have done this 2 years ago and rolled the dice on the warranty
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on December 13, 2020, 01:32:51 AM
Alan. That's a beautiful curve there. Bet it's a whole new ride. Enjoy. Stuart
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on December 13, 2020, 09:40:59 AM
Very nice curve Alan.  Torque everywhere sure makes a fun ride. 
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on December 13, 2020, 09:35:45 PM
Very nice curve Alan.  Torque everywhere sure makes a fun ride.
went almost 400 miles today and really had a blast! amazing with Harley how much a difference removing the cat and a tune makes! On my BMW it only picked up a few TQ and HP though I used a canned map (not sure anyone knows how to tune those or if even possible). Made that bike better for sure but not even the same hemisphere as the Harley as far as changing bike
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on December 14, 2020, 06:26:12 AM
Did a short 150 mile ride on the CVO King yesterday.  First time I've been on a bike since 2 Nov.  Got home late Saturday from Houston MD Anderson after my stem cell transplant. 

Nice to be on the bike and clear my head.
Title: Re: What did you do to or on your CVO today?
Post by: smkymtnboy on December 14, 2020, 04:11:30 PM
Did a short 150 mile ride on the CVO King yesterday.  First time I've been on a bike since 2 Nov.  Got home late Saturday from Houston MD Anderson after my stem cell transplant. 

Nice to be on the bike and clear my head.
stem cell transplant? sounds serious! your health doing well?
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on December 14, 2020, 10:49:04 PM
Did a short 150 mile ride on the CVO King yesterday.  First time I've been on a bike since 2 Nov.  Got home late Saturday from Houston MD Anderson after my stem cell transplant. 

Nice to be on the bike and clear my head.
Good for you Dave!
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on December 15, 2020, 06:35:59 AM
stem cell transplant? sounds serious! your health doing well?
Yes, Stem Cell Transplant.  Diagnosed with Multiple Myeloma, Stage III last December.  Started Chemo in January.  In July my cancer was down enough for a Stem Cell Transplant, but COVID would not allow it.  Finally in November I could go to Houston to have it done.  Started the process Nov 4th.  Got cleared to go home on Dec 11th.

Yea, its pretty serious.  While in patient for transplant, second best nurse to patient ratio there is, only ICU has a better ratio.  Chemo does there before transplant was extremely hi.  Once it killed all my white blood cells, all my plasma and such, I got the stem cells transplanted to rebuild my blood. 

Hopefully my cancer will be in remission for 12 plus years.  I'll be on a maintenance Chemo the rest of my life.

Other than the two months at MD Anderson it has not slowed me down, first ten months, while doing chemo I rode 28,000 miles.
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on December 15, 2020, 11:12:50 AM
That's a tough row to hoe. Nice that you're back home Dave. MD Anderson is the best. Back at the end of 13 my girlfriend was given 18-36 months, went to MD in Houston for treatment which included surgery and qualified for, and has been receiving experimental drug treatment through the UW (satellite program of MD Anderson here in Washington) since, and is now almost cancer free.

I'll be rooting for ya big guy!
Title: Re: What did you do to or on your CVO today?
Post by: smkymtnboy on December 15, 2020, 12:50:03 PM
Yes, Stem Cell Transplant.  Diagnosed with Multiple Myeloma, Stage III last December.  Started Chemo in January.  In July my cancer was down enough for a Stem Cell Transplant, but COVID would not allow it.  Finally in November I could go to Houston to have it done.  Started the process Nov 4th.  Got cleared to go home on Dec 11th.

Yea, its pretty serious.  While in patient for transplant, second best nurse to patient ratio there is, only ICU has a better ratio.  Chemo does there before transplant was extremely hi.  Once it killed all my white blood cells, all my plasma and such, I got the stem cells transplanted to rebuild my blood. 

Hopefully my cancer will be in remission for 12 plus years.  I'll be on a maintenance Chemo the rest of my life.

Other than the two months at MD Anderson it has not slowed me down, first ten months, while doing chemo I rode 28,000 miles.
my wife had cancer and doing anything during chemo is quite a accomplishment. riding 28000 miles makes you supermanish!!
Title: Re: What did you do to or on your CVO today?
Post by: scotman623 on December 15, 2020, 03:19:49 PM
That’s AWESOME news Dave🤝... Sending more great Karma your way my friend 🤝
Title: Re: What did you do to or on your CVO today?
Post by: HD Street Performance on December 15, 2020, 09:12:24 PM
You are a real trouper Dave, glad to hear you are fighting and pray for good outcomes.
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on December 15, 2020, 11:36:08 PM
Dave.. I always thought that you were tough.  Now I'm super impressed. Most important is that you stay well.  Crossing fingers hoping you can stay cancer free.  Keep on riding.    Stuart  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on December 16, 2020, 06:48:05 AM
Thank you all.  I do appreciate it!

I'm not really all that tough.  I am fortunate that the chemo had minimal side effects on me for the first ten months.  The biggest was I lost energy and got tired easier.  My wife said my fatigue made me more like a normal person as I was the energizer bunny before.  I rode to chemo most days the  a nice 100 mile ride after to clear my head and forget about my cancer.

Yes, MD Anderson is constantly rated in top three Cancer centers in the USA for the past 10 plus years, which is why I chose them.  I wanted the best care possible.  I fully believe I got just that while there for two months.  My Oncologist there has only treated Multiple Myeloma for the last 13 years. 

The Chemo I received there was Hell.  Kept me inpatient 2 weeks, for many it's more like 3 weeks.

I'm on the road to recovery, getting strength back and the weight I lost back.  I have been determined to not let this slow me down, or keep me from living my life to the fullest.  I have had a good attitude though out it, and pretty much lived like I had nothing unusual going on health wise.

Picked up new tags for the CVO King yesterday.  Raining like heck now, so I will put the tags on her today.
Title: Re: What did you do to or on your CVO today?
Post by: michaelokielee@yahoo.com on December 16, 2020, 06:25:25 PM
Fixed my Air Ride, pressure  switch went bad. Installed new Windvest, weirdly enough it was cold and it barely got bumped backing it in her garage and sheared off!
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on December 16, 2020, 10:51:57 PM
A great attitude will help you get through this Dave. You play it down some and I would probably try to do the same.  But we know that it's no easy task and some days can be very hard. Glad you get to ride your issues away. Keep your good attitude and you can get through this.   Stuart.
Title: Re: What did you do to or on your CVO today?
Post by: ultrarider123 on December 17, 2020, 06:49:41 AM
Dave, may the Lord continue to heal you during this time.  You know I'm just down the road so if there is EVER anything you need, I'm there, brother.
Title: Re: What did you do to or on your CVO today?
Post by: mstrobes on December 17, 2020, 08:56:16 PM
Dave hope you're doing good.
Today finely get my bike by from the dealer after 3 months for the deer strike repair in September.
Title: Re: What did you do to or on your CVO today?
Post by: Ceez on December 30, 2020, 02:10:31 AM
(https://i.imgur.com/18bbh51l.jpg)

(https://i.imgur.com/6kgFo23l.jpg)


Exhaust

Vance and Hines headers with Rinehart DBX45's

Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on December 30, 2020, 07:19:45 AM
Took the 13 CVO King out to pick up a prescription yesterday that turned into a nice 140 mile ride.  I'll ride her again today as I have a couple errands to run, then go to SMHD to log her miles for Ride 365 and meet a Friend so I should get about 130 or so miles again today.
Title: Re: What did you do to or on your CVO today?
Post by: scotman623 on December 30, 2020, 11:02:38 AM
Awesome Dave🤝... Ceez, I bet that exhaust setup sounds awesome....
Title: Re: What did you do to or on your CVO today?
Post by: cdulaney17 on December 31, 2020, 06:36:19 AM
Does anyone know PMCS?

If you've ever served, then you are very aware of preventative maintenance checks and services.

Since retiring in 2004, I firmly believe in fixing it before it breaks, which can easily ruin a good day or vacation trip.

I keep up on the chatter boxes for common problems and add them to my PMCS.

I bought my 2014 FLHTKSE CVO with 3k miles, and over a scheduled period, I replaced everything in the cam chest with top end hardware. New d&d 2-1 headers with a single fatcat. Oh, the ecm had to go too, installed a Thundermax.

So, I buy slightly used, fix all of the chatterbox issues for a powerhouse worry free beast at 46k miles now.

As a Harley Davidson certified YouTube engineer doing all of my own work, I will continue to this proven practice of PMCS until I run out of bandwidth.

Sent from my SM-G965U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: TN on January 02, 2021, 03:40:49 PM
New Year's Day ride


 Happy New Year  :beerchug:



Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on January 02, 2021, 03:56:35 PM
Can't decide if looks warmer or colder in black and white....
Title: Re: What did you do to or on your CVO today?
Post by: 17 StreetGlide CVO on January 03, 2021, 06:31:38 AM
Road out to Ragged Ass Saloon in St. James City yesterday 1/3. There were about 150 bikes there as the weather was great. If the showers holds off today taking a ride to Bert's Black Widow Harley in Port Charlotte.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on January 03, 2021, 07:07:10 AM
Rained all day New Years day in East TN.  It was nice the 2nd so I took a 216 mile ride along the Hiawassie River, then the Ocoee River to Copper Hill, then back on 68 North across the mountain into Tellico and on home.
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on January 03, 2021, 05:56:16 PM
Took a nice ride by myself to the city of Okeechobee FL.  About 250 miles and saw a great view of the lake.   Didn't see too many masks up there.  🤔😨
Stuart










Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on January 11, 2021, 06:59:56 AM
Was 33 degrees when I left the house on the bike, warmed up to 40 degrees.  Had a nice 120 mile ride, was sunny and clear out.  Also made an appointment to have seat and rotors replaced on the 2019 this Wednesday, parts are in.  Sleeting right now so I doubt I get out today.
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on January 11, 2021, 07:58:45 AM
Roters again Dave?? How many is this?,,,, I'm on my 3rd set. 😩 Stuart
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on January 12, 2021, 07:18:46 AM
4th new set of Rotors.

Next time I'm screwed as i'm out of warranty.  Will look at other options
Title: Re: What did you do to or on your CVO today?
Post by: HOGMIKE on January 12, 2021, 08:45:30 AM
4th new set of Rotors.

Next time I'm screwed as i'm out of warranty.  Will look at other options

Make sure they check the wheels again.
I’ve been down that road before.
 :soapbox:
Title: Re: What did you do to or on your CVO today?
Post by: michaelokielee@yahoo.com on January 12, 2021, 02:06:55 PM
Added the Hand Guards for the winter :pepper:
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on January 12, 2021, 06:14:24 PM
I'm out of warranty too.  I'll go after market next time.  I'm sick of warped rotors. 😣Stuart
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on January 13, 2021, 07:03:04 AM
Make sure they check the wheels again.
I’ve been down that road before.
 :soapbox:

I agree.  Not only have they checked the wheels, this is the second front wheel, and second set of rotors for it.

Rode the King a nice 132 miles yesterday.  A clear day in the very low 40's.

Will be riding the Road Glide over for the new seat and rotors today.  Hoping it gets above freezing so I can get out on my road.
Title: Re: What did you do to or on your CVO today?
Post by: TN on January 27, 2021, 06:58:58 AM
Received my painted rear fascia from NewCastle after a six week wait. Was surprised I could even order a painted part for a twelve year old bike.  :orange:





Title: Re: What did you do to or on your CVO today?
Post by: OBB on January 27, 2021, 01:14:15 PM
Received my painted rear fascia from NewCastle after a six week wait. Was surprised I could even order a painted part for a twelve year old bike.  :orange:
Curious at to why you needed a new one. Too many wheelies?

sent using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: TN on January 28, 2021, 06:48:14 AM
Curious at to why you needed a new one. Too many wheelies?

sent using Tapatalk

No wheelies here, the bullet hole was bugging me  :drink:
Title: Re: What did you do to or on your CVO today?
Post by: OBB on January 28, 2021, 09:13:43 AM
No wheelies here, the bullet hole was bugging me  :drink:
:2vrolijk_21: :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on January 29, 2021, 07:24:56 AM
Yesterday just rode the King to the dealer and back.   Nice sunny day but 35 degrees for the 115 mile round trip.
Title: Re: What did you do to or on your CVO today?
Post by: KGB on January 29, 2021, 08:31:39 AM
Yesterday just rode the King to the dealer and back.   Nice sunny day but 35 degrees for the 115 mile round trip.
(https://uploads.tapatalk-cdn.com/20210129/ee43e850202414e7d8684e86b1618d04.jpg)


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on January 29, 2021, 05:05:38 PM
Ordered a set of KST Kustom Pioneer bars in 10 inch. These are the 3 piece bars that allow for adjustment of pullback. The good news is that they had the bars in stock and they should be here tomorrow. The bad news is we had 10 inches of snow yesterday morning and it's hard to tell when I'll get them on.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on January 29, 2021, 08:32:11 PM
Ordered a set of KST Kustom Pioneer bars in 10 inch. These are the 3 piece bars that allow for adjustment of pullback. The good news is that they had the bars in stock and they should be here tomorrow. The bad news is we had 10 inches of snow yesterday morning and it's hard to tell when I'll get them on.
Piece of advice on those bars. That rubber strip that's glued into the cross piece, put a strip of painter's tape around the bars to hold that strip in place or it can fall out real easy. Get them where you want them and crank the clamp bolts down properly.

sent using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on January 29, 2021, 09:30:51 PM
Will do

Do you have KST bars Mike?
Title: Re: What did you do to or on your CVO today?
Post by: OBB on January 30, 2021, 06:11:28 AM
Will do

Do you have KST bars Mike?
Yup. Put them on back in '19.
Title: Re: What did you do to or on your CVO today?
Post by: kevin_n on January 30, 2021, 05:06:59 PM
Ordered a set of KST Kustom Pioneer bars in 10 inch. These are the 3 piece bars that allow for adjustment of pullback. The good news is that they had the bars in stock and they should be here tomorrow. The bad news is we had 10 inches of snow yesterday morning and it's hard to tell when I'll get them on.

Those bars look nice, to bad they don't make them for a street glide. I still can't decide on a set of bars.
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on January 30, 2021, 06:00:00 PM
Piece of advice on those bars. That rubber strip that's glued into the cross piece, put a strip of painter's tape around the bars to hold that strip in place or it can fall out real easy. Get them where you want them and crank the clamp bolts down properly.

sent using Tapatalk

They must have made a change on the Pioneers to eliminate the glued on piece. The directions still reference it, but it is gone and is replaced with knurling in the area where the clamp will contact it.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on January 30, 2021, 08:40:10 PM
They must have made a change on the Pioneers to eliminate the glued on piece. The directions still reference it, but it is gone and is replaced with knurling in the area where the clamp will contact it.
That's a good thing. I have the Spearheads on my '15 and got them shortly after they opened them for sale.

sent using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on January 31, 2021, 07:16:50 AM
I believed the weatherman.  Said it was going to get up to 45 degrees and 0% chance of rain.  So I rode the CVO Road Glide to SMHD, never got above 35.  On the way home, 40 miles from home it started sleeting and temp dropped to 32.  Not quite was was predicted or I had planned.  Thank God for heated gear.
Title: Re: What did you do to or on your CVO today?
Post by: scotman623 on January 31, 2021, 12:49:21 PM
I love your DEDICATION Dave!! I don’t even think about riding till it’s about 50 degrees..
Title: Re: What did you do to or on your CVO today?
Post by: Unbalanced on February 01, 2021, 02:22:14 PM
Yesterday, I had to replace the shifter shaft and front arm.  It stripped the splines.  It needs to be checked periodically to be sure the arm is on tight, the set screw tightened and the arm as tight as it can be on the outter primary.  One more thing to add to the list

(https://uploads.tapatalk-cdn.com/20210201/3b4fc40103770326a50dde11f96accb5.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on February 01, 2021, 05:56:23 PM
just replaced mine last august ....  in North Dakota, it let go about four miles away from the dealer in Williston. luckily they had every thing in stock
Title: Re: What did you do to or on your CVO today?
Post by: OBB on February 01, 2021, 08:17:20 PM
Yesterday, I had to replace the shifter shaft and front arm.  It stripped the splines.  It needs to be checked periodically to be sure the arm is on tight, the set screw tightened and the arm as tight as it can be on the outter primary.  One more thing to add to the list

(https://uploads.tapatalk-cdn.com/20210201/3b4fc40103770326a50dde11f96accb5.jpg)
If your weren't stomping on it with a size 16 boot, it may last longer. Lol

sent using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: KGB on February 01, 2021, 08:26:40 PM
If your weren't stomping on it with a size 16 boot, it may last longer. Lol

sent using Tapatalk

How did you know Michelle wore a size 16 boot?  ;D
Title: Re: What did you do to or on your CVO today?
Post by: Unbalanced on February 01, 2021, 08:26:57 PM
If your weren't stomping on it with a size 16 boot, it may last longer. Lol

sent using Tapatalk
I may resemble that remark -  or do I



(https://uploads.tapatalk-cdn.com/20210202/1592f256fd642c32be48c0831c059844.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: Unbalanced on February 01, 2021, 08:28:22 PM
How did you know Michelle wore a size 16 boot?  ;D
LoL
Title: Re: What did you do to or on your CVO today?
Post by: mstrobes on February 01, 2021, 09:10:31 PM
rode my 131 for the first time today.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on February 04, 2021, 08:08:58 AM
Took the Road Glide for a nice short 102 mile ride yesterday, 42 degrees out.
Title: Re: What did you do to or on your CVO today?
Post by: acevtwin on February 04, 2021, 08:48:27 AM
rode my 131 for the first time today.
And,....How was it??
Title: Re: What did you do to or on your CVO today?
Post by: mstrobes on February 04, 2021, 09:03:46 AM
And,....How was it??
It's awesome
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on February 04, 2021, 11:33:35 PM
My brights stopped working. Took in for ESP replacement and ended up doing the CD headlights instead and paying difference ($100). Looking forward to checking out at night. Look awesome during the day
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on February 05, 2021, 06:58:53 AM
My brights stopped working. Took in for ESP replacement and ended up doing the CD headlights instead and paying difference ($100). Looking forward to checking out at night. Look awesome during the day
Have any pictures of the CD lights?
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on February 05, 2021, 10:56:03 AM
Have any pictures of the CD lights?
.  :nixweiss: interested also
Title: Re: What did you do to or on your CVO today?
Post by: TN on February 08, 2021, 07:31:53 PM
Sunny and 62 my bike wanted to go for a ride.  :orange:




Title: Re: What did you do to or on your CVO today?
Post by: KGB on February 08, 2021, 07:50:32 PM
Sunny and 62 my bike wanted to go for a ride.  :orange:
Did you obliged?


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on February 09, 2021, 12:20:13 AM
Have any pictures of the CD lights?
I will post up this weekend
Title: Re: What did you do to or on your CVO today?
Post by: TN on February 09, 2021, 06:33:59 AM
Did you obliged?


Sent from my iPhone using Tapatalk

Of course I did, I’m sunny and 63  :drink:
Title: Re: What did you do to or on your CVO today?
Post by: KGB on February 09, 2021, 06:36:23 AM
Of course I did, I’m sunny and 63  :drink:
I won't be doing any riding, laying in hospital, had left hip replaced yesterday, also it's 22 degrees out! I hope you enjoyed your ride


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: TN on February 09, 2021, 06:59:35 AM
I won't be doing any riding, laying in hospital, had left hip replaced yesterday, also it's 22 degrees out! I hope you enjoyed your ride


Sent from my iPhone using Tapatalk

Dang, hate to hear about your situation right now, praying for a fast full recovery.

 :2vrolijk_09:
Title: Re: What did you do to or on your CVO today?
Post by: KGB on February 09, 2021, 07:22:51 AM
Dang, hate to hear about your situation right now, praying for a fast full recovery.

 :2vrolijk_09:
Actually I was looking forward to getting it done, that 600 mile ride from Ohio to MV was taking its toll on the hip, Tylenol and my anti-inflammatory wasn't cutting it anymore, so should be much more enjoyable riding this year


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on February 09, 2021, 07:31:43 AM
Sunny and 52 yesterday so took the King to DR appointment and an errand.  About 48 miles.

Should be closer to 58 today, so will take the Road Glide out for a little ride.
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on February 09, 2021, 11:27:08 AM
I won't be doing any riding, laying in hospital, had left hip replaced yesterday, also it's 22 degrees out! I hope you enjoyed your ride


Sent from my iPhone using Tapatalk
Welcome to the (hip replacement) club... had mine (left also) done 1/2007. Best thing I ever did only regret was waiting as long as I did to have it done. If you're like me you will not regret having it done....wishing you a speedy and full recovery.

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: KGB on February 09, 2021, 12:05:49 PM
Welcome to the (hip replacement) club... had mine (left also) done 1/2007. Best thing I ever did only regret was waiting as long as I did to have it done. If you're like me you will not regret having it done....wishing you a speedy and full recovery.

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Thank you Fireman, I had my right one replaced 7 years ago, was in hospital 3 nights, I get out of hospital today, PT had me up and walking up and down stairs already less than 24 hours from surgery, crazy! I'm sure I will ready to ride by the time the weather changes in Ohio


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on February 09, 2021, 01:32:57 PM
Glad to hear you are doing Ok after surgery Keith.

Might have to give you a new nickname or something. Steve Austin???
Title: Re: What did you do to or on your CVO today?
Post by: KGB on February 09, 2021, 01:49:45 PM
Glad to hear you are doing Ok after surgery Keith.

Might have to give you a new nickname or something. Steve Austin???
I think I have about 20lbs of metal in me?


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: bigC on February 09, 2021, 02:00:39 PM
Actually I was looking forward to getting it done, that 600 mile ride from Ohio to MV was taking its toll on the hip, Tylenol and my anti-inflammatory wasn't cutting it anymore, so should be much more enjoyable riding this year


Sent from my iPhone using Tapatalk

Surely you could find something in MV better than Tylenol to help with the pain. If not, your wern't trying hard enough  :drink:  Hope you have a speedy recovery!
Title: Re: What did you do to or on your CVO today?
Post by: KGB on February 09, 2021, 02:10:19 PM
Surely you could find something in MV better than Tylenol to help with the pain. If not, your wern't trying hard enough  :drink:  Hope you have a speedy recovery!
Yea but I would have never made home


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on February 11, 2021, 08:59:10 AM
Yesterday was a great day in East TN with temperature getting up to 69 degrees and sunny.  So I took the CVO RG out with 9 others for a great 222 mile ride.  Some  great curvy roads like TN 360, to Tellico, then 68 over the mountain to Ducktown then back along the Ocoee River to 30 up through Reliance, then 163 along the Hiawassie river to 58 north.  Nice to ride in blue jeans and a sweatshirt in February, usually heated gear this time of year.
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on February 11, 2021, 12:03:48 PM
Go ahead Dave rub it in .... it got clear up to 10❄️ here in the wonder-full state of Iowa yesterday ... winter sux
Title: Re: What did you do to or on your CVO today?
Post by: lyn.husen on February 11, 2021, 04:11:33 PM
76 today in Jacksonville Fl, went out for nice 4 hour ride to nowhere
Title: Re: What did you do to or on your CVO today?
Post by: Unbalanced on February 11, 2021, 04:22:26 PM
It was 84 here in the Daytona Area today a super nice day to have gotten out of the house.  I wish I could of gotten away.   Working sure does cramp the riding ambitions.  Very Jealous! 
Title: Re: What did you do to or on your CVO today?
Post by: JC on February 13, 2021, 07:01:20 PM
Signed the papers to send her to a new home and get her replacement coming.
2021 CVO SG Sunset Orange/Black with 131 Kit, S&S Pump and Cam Plate, Ventilator Extreme Air Filter, D&D Billet Cat, SE High Capacity Clutch Kit.
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on February 13, 2021, 09:53:45 PM
I will post up this weekend
Looks great IMO. Need to trim up the side pieces to fit back in
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on February 13, 2021, 11:23:16 PM
Changed out the radio for a new GTX.. Great install by soundz customz with new speakers and amp.   Really nice upgrade.   Stuart
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on February 14, 2021, 07:17:32 AM
Signed the papers to send her to a new home and get her replacement coming.
2021 CVO SG Sunset Orange/Black with 131 Kit, S&S Pump and Cam Plate, Ventilator Extreme Air Filter, D&D Billet Cat, SE High Capacity Clutch Kit.
Love the Sunset Orange/Sunset Black fade.  Out in the sun that sunset black looks so good.
Title: Re: What did you do to or on your CVO today?
Post by: Mofo67 on February 14, 2021, 08:59:20 AM
Signed the papers to send her to a new home and get her replacement coming.
2021 CVO SG Sunset Orange/Black with 131 Kit, S&S Pump and Cam Plate, Ventilator Extreme Air Filter, D&D Billet Cat, SE High Capacity Clutch Kit.

Congratulations, the Sunset Orange/Black is a great color combination.
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on February 14, 2021, 09:37:54 AM
Today?  Today at 8:36 AM it is 1 degree outside.  Fahrenheit.  And this will be the high for the day.  Today is also forecast to be warmer than tomorrow.  So I didn't do sh*t on my CVO today.
Title: Re: What did you do to or on your CVO today?
Post by: JC on February 14, 2021, 10:06:48 AM
Love the Sunset Orange/Sunset Black fade.  Out in the sun that sunset black looks so good.
Yes it does. It's the first CVO SG paint that I have liked since I bought the UV/ML.
Title: Re: What did you do to or on your CVO today?
Post by: JC on February 14, 2021, 10:08:03 AM
Congratulations, the Sunset Orange/Black is a great color combination.
Thanks. Looking forward to the 131 also. :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on February 14, 2021, 11:39:32 AM
What do you guys think about the cable clutch now on cvo bikes?? With a 131,would you consider going with hydrollic??? Just curious. Stuart.
Title: Re: What did you do to or on your CVO today?
Post by: Mofo67 on February 14, 2021, 11:58:57 AM
Thanks. Looking forward to the 131 also. :2vrolijk_21:

The 131 is a lot of fun, had it in my ‘19 CVO SG. Curious why you are using the S&S oil pump/cam plate instead of the one that comes in the new HDs? Seems the new HD 8 lobe has taken care of past issues.
Title: Re: What did you do to or on your CVO today?
Post by: JC on February 14, 2021, 12:59:09 PM
The 131 is a lot of fun, had it in my ‘19 CVO SG. Curious why you are using the S&S oil pump/cam plate instead of the one that comes in the new HDs? Seems the new HD 8 lobe has taken care of past issues.
Glad to hear that you enjoyed the 131. It does look like the 8 lobe has fixed the issues, guess in my mind it's cheap insurance for 700 bucks when your dropping that kind of money on motor work. Just my opinion.
Title: Re: What did you do to or on your CVO today?
Post by: Mofo67 on February 14, 2021, 01:03:33 PM
That is a good way to look at it. Looking forward to seeing pictures and hearing your thoughts on the 131.
Enjoy the new bike.
Title: Re: What did you do to or on your CVO today?
Post by: JC on February 14, 2021, 01:13:01 PM
What do you guys think about the cable clutch now on cvo bikes?? With a 131,would you consider going with hydrollic??? Just curious. Stuart.
I personally like the friction zone of a cable clutch. I have had the hydraulic since 07 but still never liked the friction zone being 70-80% at the end of the lever. I even switched over to a Rivera Pro Clutch in my 15 CVO SG, feel was better but still not what I was looking for.
Title: Re: What did you do to or on your CVO today?
Post by: HOGMIKE on February 14, 2021, 09:16:07 PM
I personally like the friction zone of a cable clutch. I have had the hydraulic since 07 but still never liked the friction zone being 70-80% at the end of the lever. I even switched over to a Rivera Pro Clutch in my 15 CVO SG, feel was better but still not what I was looking for.

I wasn’t real happy about the “friction zone” or the hard pull either.
I fixed that and will keep the juice clutch.
Too bad Harley didn’t sell a “SE” kit, they missed out on some $$$$ there!
 :soapbox:
Title: Re: What did you do to or on your CVO today?
Post by: CVO 2015 on February 17, 2021, 09:50:53 PM
Got a Rekluse slave clutch  cylinder imstalled on the wife's 2015 CVO..Clutch feels like butter..

Sent from my SM-N981U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on February 23, 2021, 06:38:53 AM
It's suppose to get up to 60 today.  We have a group ride planned, will be about 39 when I leave the house.  Going to be a good day to ride the CVO RG
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on February 23, 2021, 06:50:31 AM
Enjoy the ride today Dave. It's been rough up there I know. Hopefully your weather will be improving day by day.  Enjoy. Stuart
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on February 23, 2021, 01:22:58 PM
Got an email today from my dealer that my replacement rear fender and other damaged parts will be sent from Harley's painters shortly. Looking forward to finally getting my bike back to the way it should be after getting rear ended on Jan. 6th.

I'm also replacing my tail lights with Advanblacks smoked version of the red CVO lights.
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on February 24, 2021, 02:49:36 PM
The weather around here finally broke enough to get Orange Crush in for a handlebar change. I went with 10" KST Pioneer bars, they are multipiece bars that are very adjustable. The whole process was very easy as the Road Kings have much less stuff that has to be removed. The wiring was an absolute breeze as it was only necessary to take the plug off of the Throttle control wires as the bars are huge and the bend was very gradual. I have not gotten to ride the bike yet becasue it got pretty chilly once the "big light" went out last evening, but I will do so this evening.


Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on February 25, 2021, 11:22:51 AM
The last (I hope) of my replacement parts came in yesterday, so I have an appointment to drop the bike off next Tuesday morning, 3/2, and should get it back on Wednesday. I'm anxious to see how it looks with the smoked tail lights, I always thought the red looked out of place on my Black and Orange bike.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on February 26, 2021, 07:24:28 AM
Yesterday was a really nice day in East TN, so out for a ride.  352 miles total.  Took a couple roads I had never been on.  Legget road west out of Sale Creek going up the mountain was great, then onto Pitts Gap road and then Pitts Gap Mountain road to lower east valley road into Pikeville on 30.  Then the rest were roads I have been on, 30 to Spence, 111 to Sparta, then 84 Kalf Killer road, to Monterey and 70 back to kingston.  Then to Smokey Mountain Harley and home.
Title: Re: What did you do to or on your CVO today?
Post by: michaelokielee@yahoo.com on February 26, 2021, 02:29:45 PM
Yesterday was a really nice day in East TN, so out for a ride.  352 miles total.  Took a couple roads I had never been on.  Legget road west out of Sale Creek going up the mountain was great, then onto Pitts Gap road and then Pitts Gap Mountain road to lower east valley road into Pikeville on 30.  Then the rest were roads I have been on, 30 to Spence, 111 to Sparta, then 84 Kalf Killer road, to Monterey and 70 back to kingston.  Then to Smokey Mountain Harley and home.

Your are the example of what retirement should be, ride, ride and ride.  I am on a 60 hour gig up in Maryland until May and then back to home to Alabama for 40 hour weeks.  I will be up in your neck of the woods (Murphy, NC) to ride maybe a week in June, can't wait.
Title: Re: What did you do to or on your CVO today?
Post by: Robmay on February 26, 2021, 04:49:50 PM
Thing is though, I don’t believe Dave is retired yet.


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on March 01, 2021, 08:20:54 AM
Thing is though, I don’t believe Dave is retired yet.


Sent from my iPhone using Tapatalk
Technically I am not retired, out of work on Disability.

But your correct rode like that working, as 3 weeks at work and 3 weeks home to ride is a good rotation.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on March 05, 2021, 09:18:25 AM
Busy yesterday, new Tags put on Fatboy and CVO Road Glide.  Oil change on the CVO King.  Then took the King for a 219 mile ride with a club brother.
Title: What did you do to or on your CVO today?
Post by: Unbalanced on March 05, 2021, 10:15:49 AM
Busy yesterday, new Tags put on Fatboy and CVO Road Glide.  Oil change on the CVO King.  Then took the King for a 219 mile ride with a club brother.
Dave I did pretty much the same thing only the tags took several hours to unbolt all the license plates to put on the new stickers - never have dropped so many tiny washers and nuts.   

Then we went for 150 mile ride and tried out a newer Brew Pub in Titusville.   PlayLinda Brewery (Brix) on US1 just south of highway 50.   The wife found a new beer like blue moon, but was better as she said you could taste the orange without adding it afterwords.  (Tropical Wonderland Ale).
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on March 05, 2021, 06:21:18 PM
Will do (or at least start on) the NSP (normal Spring maintenance) this weekend.  Oil changes on all three, pack wheel bearings on the FXR, inspect everything on all three, fasteners for tight, primary fluids, etc etc etc.  I might even get energetic and actually do the cam change on the old FXR that I never got done over the winter.  That would be make it a really excellent weekend if all that gets done.  We'll see.....

Three bikes of NSP maintenance is a nice way to spend a weekend. 
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on March 10, 2021, 10:59:33 AM
Finally got to ride Orange Crush with the new bars. I did have to pull them back slightly from the original adjustment because I was having to reach a bit far when the forks were near lock. After the adjustment I can’t believe I waited this long to make the change. I thought the old bars were pretty good but the new ones are much more comfortable. Lesson learned.
Title: Re: What did you do to or on your CVO today?
Post by: atkrocket25 on March 10, 2021, 11:43:26 AM
Took the CVO through some twisties in Bakersfield(https://uploads.tapatalk-cdn.com/20210310/f617a2a0e0f363d6d6024c2b247a81d1.jpg)
(https://uploads.tapatalk-cdn.com/20210310/254542c02f74706e6d537ad1ebc7cea3.jpg)


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Indenial on March 12, 2021, 09:53:14 PM
Atkrocket--nice looking CVO.  Looks brand new
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on March 13, 2021, 07:17:45 AM
Took the CVO King for a short 110 mile ride.  Got a few springs twice for about a mile each on my way home, didn't get wet just slightly damp.
Title: Re: What did you do to or on your CVO today?
Post by: JC on March 13, 2021, 07:55:10 PM
Finally got to take the 2021 on its first 100 mile ride. Installed the XM module out of the 15 (Works flawlessly in the new GTS head unit). I really am liking the old school cable clutch. The friction zone is about 3/8" off the grip, right where I would expect it to be. Still waiting on the 131 kit to come in. Dealer says hopefully Wednesday when the parts arrive. Happy with my decision so far.
Title: Re: What did you do to or on your CVO today?
Post by: JC on March 13, 2021, 08:12:53 PM
Definitely needs a regular crash bar and a set of lowers.
Title: Re: What did you do to or on your CVO today?
Post by: d3v1ld0g on March 13, 2021, 11:18:58 PM
Changed the oil, trans, and primary. Replaced cracked primary shoe. Then figured, why not change the handlebar bushings. A lot more involved than I thought it was gonna be. I’ll put it back together tomorrow.
Title: Re: What did you do to or on your CVO today?
Post by: d3v1ld0g on March 13, 2021, 11:20:16 PM
I also put on a center stand. I like the stance.
Title: Re: What did you do to or on your CVO today?
Post by: Road G on March 14, 2021, 04:55:00 PM
added a new timing cover...
I love that saying!!
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on March 14, 2021, 06:06:11 PM
Wildmustang , Miss P, Steve WW, Miss Susan and I got together for our first real ride of the year. When we left at 11am it was 46 degrees, but it warmed up to a blistering 53 degrees by the time we got home.LOL

We rode down to the Swinging Bridge restaurant in Paint Bank, Va for lunch. The top of the hill between Newport and Paint Bank had a ton of small gravel still on the road, and there were a few spots on the side of the hill that still had snow. Felt really good to get out and about for a little riding.
Title: Re: What did you do to or on your CVO today?
Post by: atkrocket25 on March 14, 2021, 08:00:43 PM
Atkrocket--nice looking CVO.  Looks brand new
Thank you! She’s only got 8,500 miles on her.  I’m hooked!


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on March 15, 2021, 07:05:55 AM
Thank you! She’s only got 8,500 miles on her.  I’m hooked!


Sent from my iPhone using Tapatalk
Not my old one then, bought one liker her new, put 47K on it before I traded it on the skunk.

Great color and paint job,
Title: Re: What did you do to or on your CVO today?
Post by: Phreakyz on March 15, 2021, 08:51:21 AM
The sun was shining in Ohio (Still COLD though) so we took the bike for a little ride.   Looks like other decided to get their toys out as well albeit not as successfully! LOL!
Title: Re: What did you do to or on your CVO today?
Post by: Phreakyz on March 15, 2021, 08:51:47 AM
The sun was shining in Ohio (Still COLD though) so we took the bike for a little ride.   Looks like other decided to get their toys out as well albeit not as successfully! LOL!
Title: Re: What did you do to or on your CVO today?
Post by: JC on March 15, 2021, 10:51:19 AM

OUCH! That's gonna be expensive.
Title: Re: What did you do to or on your CVO today?
Post by: michaelokielee@yahoo.com on March 15, 2021, 01:52:54 PM
Went for a ride over to Fredericksburg, VA and Quantico HD to buy some parts. Their showroom is FULL of Fat Tire Bikes, very nice dealership! :pepper:
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on March 16, 2021, 08:12:11 AM
Overcast day, calling for rain yesterday.  So I rode the Road Glide over to a friends house to install a new Front tire.  You think I needed one?  25K miles on this American Elite

Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on March 16, 2021, 08:14:39 AM
New American Elite up front.  Seems better in the curves on the way home.  Beat the rain by 30 minutes.

Title: Re: What did you do to or on your CVO today?
Post by: TN on March 16, 2021, 11:12:58 AM
Needed a ride to clear the head. Looking to do a really long ride I’ve been pondering on for several years. I’m confident in my bike, physically I’m okay, time to suit up and ride.


Title: Re: What did you do to or on your CVO today?
Post by: 110Mofo on March 16, 2021, 11:25:45 AM
Needed a ride to clear the head. Looking to do a really long ride I’ve been pondering on for several years. I’m confident in my bike, physically I’m okay, time to suit up and ride.

 You Have an open invitation  :drink:
Title: Re: What did you do to or on your CVO today?
Post by: TN on March 17, 2021, 07:32:46 AM
You Have an open invitation  :drink:


Much obliged my friend, going west of the Mississippi is a big step for me.   8)



edit: In those 13 states I worry about west of the Mississippi according to my math the statue of limitations should apply now.  :drink:
Title: Re: What did you do to or on your CVO today?
Post by: TN on March 17, 2021, 05:58:53 PM
Took a leisurely 200+ mile ride today to Edisto Island and back, good eats too.


Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on March 18, 2021, 07:50:58 AM
Who is that impersonator?

That beard makes you look much more sophisticated Phil.

I promise not to even make fun of you at MV if you keep it. You almost look like you stayed at a Holiday Inn Express last night.
Title: Re: What did you do to or on your CVO today?
Post by: TN on March 18, 2021, 01:25:45 PM
Who is that impersonator?

That beard makes you look much more sophisticated Phil.

I promise not to even make fun of you at MV if you keep it. You almost look like you stayed at a Holiday Inn Express last night.

First of all I'm am sophisticated  :drink:

Second, I got that in writing and that doesn’t mean I’ll stop making fun of you  :orange:

Ready to RIDE 
Title: Re: What did you do to or on your CVO today?
Post by: TN on March 20, 2021, 06:38:26 AM
Rode some more, ordered some AE's, tires are going up, $421.93 before tax and shipping from Dennis Kirk.

Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on March 21, 2021, 07:18:54 AM
Had to tap the set screw hole for the axle nut cover up front and put in a new set screw.  Then took her for a short 120 mile ride.  Will get a short 20 mile ride in over to our Clubhouse for family day and then 20 home.
Title: Re: What did you do to or on your CVO today?
Post by: SouthwestCVO on March 22, 2021, 01:49:39 AM
Tried to install 14" Factory 47 bars on my '21 CVO RG today. I got everything wired and mounted then discovered the clutch cable is about an inch and a half too short. (https://uploads.tapatalk-cdn.com/20210322/abbdeec2c23d261213a2bc4c4b0cd3c5.jpg)

Sent from my SM-G988U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: Phreakyz on March 22, 2021, 01:24:52 PM
Change the Oil and Filter and then I just stared at it for a while!   I love this bike! ;D
Title: Re: What did you do to or on your CVO today?
Post by: JC on March 22, 2021, 09:31:06 PM
Mounted some highway pegs and installed my screamin eagle saddlebag latch inserts.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on March 23, 2021, 08:55:35 AM
Rode the 19 CVO Road Glide 115 miles yesterday.  Picked up the oil and filter and such to do the 45,000 mile service.
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on March 23, 2021, 11:45:15 AM
Got out for about a 200 mile ride yesterday with heated gear. I noticed that I'm not far from my 45K service either Dave. BUT my bike is only a 2018!

Ride on Dave!!!
Title: Re: What did you do to or on your CVO today?
Post by: Dealer MC on March 23, 2021, 02:08:53 PM
1st Oil change on the 2020. installed a new 10 inch wind vest wind screen and new highway peg mounts. Ready for my 3 week trip to hit most the western states.
Title: Re: What did you do to or on your CVO today?
Post by: ANWCVO on March 23, 2021, 02:47:17 PM
Wife and I will a 114 mile lunch run. she rode her CVO - first long ride on a bagger and she did great! Also ordered up th Boom GTS for the 2016 CVO Street Glide
Title: Re: What did you do to or on your CVO today?
Post by: OBB on March 23, 2021, 04:56:49 PM
Wife and I will a 114 mile lunch run. she rode her CVO - first long ride on a bagger and she did great! Also ordered up th Boom GTS for the 2016 CVO Street Glide
Where did you order through if I may ask?
Title: Re: What did you do to or on your CVO today?
Post by: ANWCVO on March 23, 2021, 08:33:17 PM
Harley San Diego - and they are going to do the install. Darn radios aren’t cheap. Out the door it was near $2000. Then they said 1.5 hours labor to switch.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on March 24, 2021, 06:52:04 AM
Harley San Diego - and they are going to do the install. Darn radios aren’t cheap. Out the door it was near $2000. Then they said 1.5 hours labor to switch.
Was curious. New Castle sells it for $1600 online. Sounds like they gave you a fair discount to be out the door at that price. I know labor and sales tax out there can't be cheap.

sent using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: TN on March 25, 2021, 06:38:34 AM
Rode over 400mi to and fro yesterday to attend a very important tea party.


Title: Re: What did you do to or on your CVO today?
Post by: JMK on March 25, 2021, 10:29:14 PM
Installed A Rekluse torque drive clutch with the medium springs. Test ride tomorrow.
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on March 26, 2021, 04:31:26 AM
Ordered a set of Dunlop American elite tires for the mako. Should have them shortly I hope. Stuart
Title: Re: What did you do to or on your CVO today?
Post by: OBB on March 26, 2021, 05:42:39 AM
Added a GDO transmitter to the '12 and paired it up to the existing receiver from the '15. Test both and they work just like they should.  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: BUCKNUT GREG on March 26, 2021, 02:11:16 PM
Rode over 400mi to and fro yesterday to attend a very important tea party.

  Now that was a ride worth takin  :2vrolijk_21:
  Great pic TN
Title: Re: What did you do to or on your CVO today?
Post by: TN on March 27, 2021, 07:14:49 AM
  Now that was a ride worth takin  :2vrolijk_21:
  Great pic TN

 Yes it was  :orange:


Installed the rear AE and used the updated axle, it seems to hold as well as the old one.  :drink:

Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on March 27, 2021, 07:34:37 AM
Just a short ride, 110 round trip to dealer.  Then a bit later 12 mile round trip to marina. 
Title: Re: What did you do to or on your CVO today?
Post by: james.bradfordiii on March 27, 2021, 01:34:03 PM
Working on installing Legends Suspension Revo Arc front and rear. Knocking out the rear first as it’s pretty straight forward. Front end this evening.(https://uploads.tapatalk-cdn.com/20210327/b91a998b7f20f224eb4d4255611a8d49.jpg)
(https://uploads.tapatalk-cdn.com/20210327/817e0f3dba6c14ea4b5bf820dee74dfa.jpg)
(https://uploads.tapatalk-cdn.com/20210327/92130a492e2e55e4e5403dbffd2c9f29.jpg)


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: TN on March 28, 2021, 09:35:53 AM
Front too, installed NGK DCPR8E.

Fixing to ride for my first shot of Pfizer covid vaccine.  :drink:
Title: Re: What did you do to or on your CVO today?
Post by: 08glide on March 30, 2021, 02:16:40 PM
attending the private tea party makes you a "super Hero".   :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: TimP on March 30, 2021, 10:31:21 PM
Well not all today:  :)
Woods 22XE cam, Woods Alpha lifters, S&S cuffs, Fuel Moto EZ pushrods, Fuel Moto mapped Power Vision tune.
Feuling RS cam plate, oil pump and vented dip stick.
Fulsac MX headpipe (Jet-Hot coated black) their 2" power cores and techmat blanket.
H-D Black bolt kit.
Primary vent kit.
Hydraulic brake and clutch fluid flush.
Ciro highway peg mounts.
Yaffe stealth 3 license plate frame painted to match.
Spark plugs, fluids changed, fasteners check,  washed waxed, etc, etc, etc.
Fired it up a couple of times last weekend checking for leaks. So far so good. Sounds incredible and the throttle responce is amazing. Need to button up a few loose ends and weather permitting will be taking it out the end of the week.  :pepper:

Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on April 02, 2021, 08:40:51 AM
I did the 45K service on my 2019 CVO Road Glide yesterday afternoon.  Hope to take her for a ride this afternoon.
Title: Re: What did you do to or on your CVO today?
Post by: TN on April 03, 2021, 06:35:24 AM
Cleaned the calipers, flushed brake fluid and replaced front pads.

Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on April 03, 2021, 06:13:47 PM
Rode down to the Back of the Dragon Store, but was the only bike there.. Too cold I reckon
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on April 04, 2021, 07:59:33 AM
Rode down to Chattanooga for the CMA Blessing of the bikes, nice 135 mile day.
Title: Re: What did you do to or on your CVO today?
Post by: michaelokielee@yahoo.com on April 05, 2021, 01:50:59 PM
Smoked this Lambo, just kidding.  I had a nice ride up to the North Shore, MD near Annapolis! :pepper: :pepper:
Title: Re: What did you do to or on your CVO today?
Post by: SouthwestCVO on April 06, 2021, 12:07:09 AM
Finished installing 14" Factory 47 bars(https://uploads.tapatalk-cdn.com/20210406/7ca78c1cf3c675ce4a8fd09dc4e555d3.jpg)

Sent from my SM-G988U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: OBB on April 06, 2021, 05:57:06 AM
Finished installing 14" Factory 47 bars

(https://uploads.tapatalk-cdn.com/20210406/7ca78c1cf3c675ce4a8fd09dc4e555d3.jpg)

Sent from my SM-G988U using Tapatalk



Where did you find a new clutch cable or were you able to use the stock one on those?

Your tank badges look much better than the plain jane ones that came on it. :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: SouthwestCVO on April 06, 2021, 11:32:45 AM
Where did you find a new clutch cable or were you able to use the stock one on those?

Your tank badges look much better than the plain jane ones that came on it. :2vrolijk_21:
I used a cable extension from https://fatbaggers.com/. The stock cable was about 2" short with the 14s.

Sent from my SM-G988U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: OBB on April 06, 2021, 09:46:39 PM
I used a cable extension from https://fatbaggers.com/. The stock cable was about 2" short with the 14s.

Sent from my SM-G988U using Tapatalk
Good info to know. A lot of guys on the RG forum are wanting to do bars on their '21 Sharks and are being told nothing is available yet.

sent using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on April 07, 2021, 06:45:29 AM
Did a Project Ridemore ride out of Smokey Mountain HD.  A nice 268 mile ride though the hills and curves of East TN, North GA and West NC.  Beautiful sunny day and great temperatures. 
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on April 11, 2021, 05:46:57 PM
Wmustang, Miss P, Egghead Egnor, Miss Susan and I rode through the coalfields down to Pineville to eat at Ole Jose. Nice little 120 Mike ride.
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on April 17, 2021, 02:32:51 PM
New dunlop American elite tires on the Mako.  Thanks Dave (flstfidave) for the recommendation. Got em installed yesterday.  Really like the ride. I went 15k on the original tires. Longest  I ever did.  :2vrolijk_21:Stuart
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on April 18, 2021, 07:03:55 AM
Your welcome Stuart.

I lead my Clubs fallen brother ride yesterday, a nice 292 mile ride to pay respects to 4 of our fallen brothers.  Good day, good ride and a nice cookout after.
Title: Re: What did you do to or on your CVO today?
Post by: TN on April 18, 2021, 02:11:30 PM
Took a ride to get my second covid vaccine shot, trying to get use to a new helmet and it’s not going well but I’m committed to hang with it for now.

Title: Re: What did you do to or on your CVO today?
Post by: michaelokielee@yahoo.com on April 18, 2021, 03:51:11 PM
Got Fat Tire Kit & Derby Cover :pepper:

Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on April 18, 2021, 05:17:13 PM
Got Fat Tire Kit & Derby Cover :pepper:
That looks nice!!!! :2vrolijk_21:

IMHO the fat tire looks a lot better than the "big wheel" (20"+ inch wheel)... the wrap around fender is a bonus.

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on April 18, 2021, 05:29:46 PM
That looks nice!!!! :2vrolijk_21:

IMHO the fat tire looks a lot better than the "big wheel" (20"+ inch wheel)... the wrap around fender is a bonus.

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:

Ditto.  I like everything about that also.  In fact that entire scheme from front to back is my overall favorite of all the paint sets (accessorized or not) in many years.  Like everything about that overall look and especially like the way the colors are mixed in and out, from front to back and top to bottom.  Really good looking bike.
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on April 19, 2021, 01:01:55 AM
my 131 kit I put in a few months ago blew up (under warranty thank God..) so got bike back yesterday afternoon. Did my 500 mile break-in ride today so next week can get the oil changed and check it all out so next weekend I can start really having fun with it again! Last couple hundred miles today though I wasn't ripping it, I was pushing it up to 4K and seems to be running great. Will be glad to not have to look at the tach next weekend for sure.
Yes, my butt is sore..
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on April 19, 2021, 04:46:53 AM
I bet. Hope it stays together better this time. 👍Stuart
Title: Re: What did you do to or on your CVO today?
Post by: OBB on April 19, 2021, 06:01:44 AM
my 131 kit I put in a few months ago blew up (under warranty thank God..) so got bike back yesterday afternoon. Did my 500 mile break-in ride today so next week can get the oil changed and check it all out so next weekend I can start really having fun with it again! Last couple hundred miles today though I wasn't ripping it, I was pushing it up to 4K and seems to be running great. Will be glad to not have to look at the tach next weekend for sure.
Yes, my butt is sore..
You don't have much luck with  HD engines do you? LOL
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on April 19, 2021, 06:39:18 AM
my 131 kit I put in a few months ago blew up (under warranty thank God..) so got bike back yesterday afternoon. Did my 500 mile break-in ride today so next week can get the oil changed and check it all out so next weekend I can start really having fun with it again! Last couple hundred miles today though I wasn't ripping it, I was pushing it up to 4K and seems to be running great. Will be glad to not have to look at the tach next weekend for sure.
Yes, my butt is sore..
What went wrong with the first 131?  Sure hope this one does better.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on April 19, 2021, 06:40:51 AM
Got Fat Tire Kit & Derby Cover :pepper:

Looks great. 
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on April 19, 2021, 11:36:24 PM
What went wrong with the first 131?  Sure hope this one does better.
Fried the piston and all that goes along with that--
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on April 20, 2021, 06:44:19 AM
Fried the piston and all that goes along with that--
Wow.  I do not believe I have heard of a 131 doing that. 
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on April 20, 2021, 07:22:45 PM
Got Fat Tire Kit & Derby Cover :pepper:
  love it,,,  :2vrolijk_21:       who/what kit did you go with
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on April 21, 2021, 06:19:21 AM
Loading the bike to ride to Joplin MO for the week end.  My wife has a Women in the Wind event there Thursday afternoon, Friday and Saturday.  Spending tonight in Van Buren MO, on the Current River.
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on April 21, 2021, 12:10:01 PM
Loading the bike to ride to Joplin MO for the week end.  My wife has a Women in the Wind event there Thursday afternoon, Friday and Saturday.  Spending tonight in Van Buren MO, on the Current River.

I'm out of town Friday night and all day Saturday.  If you want to catch dinner Thursday night drop me a message.
Title: Re: What did you do to or on your CVO today?
Post by: pudgeyxj on April 21, 2021, 01:16:08 PM
New hand guards, new front and rear speakers, new amp, new lights, and miles of smiles. Now I need a new rear tire, have front rotors to throw on, maybe new front tire and we're hopefully done for the season.

P  :drink:
Title: Re: What did you do to or on your CVO today?
Post by: michaelokielee@yahoo.com on April 21, 2021, 04:11:42 PM
  love it,,,  :2vrolijk_21:       who/what kit did you go with

Thanks for all the compliments from everyone, it rides like a new bike.  I got the Native Custom Baggers new EZ Kit for 14 and up, new designed fender, so no fork strut change for the CVO'S with the 21" wheel. Joe painted the fender, I had him put the Bar N Shield on it as well.
Title: Re: What did you do to or on your CVO today?
Post by: michaelokielee@yahoo.com on April 21, 2021, 04:20:17 PM
Another
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on April 21, 2021, 08:49:28 PM
That front end looks amazing  :2vrolijk_21:Stuart
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on April 21, 2021, 11:50:19 PM
That fender really makes it Michael!
Title: Re: What did you do to or on your CVO today?
Post by: GKroadking on April 22, 2021, 03:55:23 AM
Thanks for all the compliments from everyone, it rides like a new bike.  I got the Native Custom Baggers new EZ Kit for 14 and up, new designed fender, so no fork strut change for the CVO'S with the 21" wheel. Joe painted the fender, I had him put the Bar N Shield on it as well.

amazing, that looks so fat  :2vrolijk_21: could you tell me what parts are required to go so fat? what are the changes at the fork? whisch size is the wheel and tire?

I'm thinking of a Change on my King  8)

Thanks
Title: Re: What did you do to or on your CVO today?
Post by: MC16LTD on April 25, 2021, 08:42:07 PM
Put lids on my Limited.   Wife didn't like the speakers in the pods said they bothered her sciatica.   Was able to find a set of now-extinct Boom 1 speakers with the correct covers on Flea-Bay (new old stock) and ordered some Paladin Silver lids.  Had to order a Molex MX150 connecter to move speaker wires out of the tour-pak harness to keep the rear headset plugin and controls.   Sounds good and didn't have to replace amps and speakers ($$$$) or get a flash.  Ordered some 7" HDPE blanks to cover the pod holes and looks acceptable.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on April 26, 2021, 07:31:43 AM
Well, it was a bit cold riding to Joplin, left the house Wednesday, 41 degrees.  Crossed the Cumberland Plateau it had dropped to 31 and snow flurries.  Nothing stuck, warmed back up slowly to a high of 52.  Spent the night in Van Buren MO on Current river at a nice place we like.  Went to Big Springs in the morning and on to Joplin, to their before the rain.  Got a couple short rides on Friday and Saturday between the rains.  Nice 663 mile ride home yesterday, started out at 48 and warmed quickly to 60 then eventually hit 70 degrees.  Put 1398 miles on the bike.
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on April 26, 2021, 10:08:34 AM
Well, it was a bit cold riding to Joplin, left the house Wednesday, 41 degrees.  Crossed the Cumberland Plateau it had dropped to 31 and snow flurries.  Nothing stuck, warmed back up slowly to a high of 52.  Spent the night in Van Buren MO on Current river at a nice place we like.  Went to Big Springs in the morning and on to Joplin, to their before the rain.  Got a couple short rides on Friday and Saturday between the rains.  Nice 663 mile ride home yesterday, started out at 48 and warmed quickly to 60 then eventually hit 70 degrees.  Put 1398 miles on the bike.

 :drink: :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: TN on May 02, 2021, 08:32:02 AM
Sunrise Sunday ride.   :orange:
Title: Re: What did you do to or on your CVO today?
Post by: OBB on May 02, 2021, 04:28:14 PM
Rode the '15 for a short lunch trip. About 150 miles.
Now we have more rain and cold weather coming in. Ugh

sent using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on May 02, 2021, 05:50:40 PM
Ride down to Shately Springs since it was opening weekend. Food was wonderful as normal, rode the Back of the Dragon back home.
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on May 03, 2021, 06:56:51 PM
New kahuna grips on the mako.    Thanks for your input Dave.  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on May 03, 2021, 06:58:05 PM
Other side.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on May 04, 2021, 07:51:59 AM
Amazing Harley says those grips do not fit the 19 CVO, but go right on easily.

Glad I could help
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on May 04, 2021, 12:01:26 PM
New kahuna grips on the mako.    Thanks for your input Dave.  :2vrolijk_21:


I put those on my 18 last year with a new set of bars and absolutely love them as well. Good for you Stu!!
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on May 04, 2021, 06:07:10 PM
Dave. Question.   Did you do the whole kahuna theme? Floor boards front and rear, brake pedal. Shift peg?   Looks pretty pricey if you do it.   Stuart.
Title: Re: What did you do to or on your CVO today?
Post by: TN on May 05, 2021, 07:14:42 AM
She is sound.   :bananarock:
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on May 05, 2021, 07:52:59 AM
Dave. Question.   Did you do the whole kahuna theme? Floor boards front and rear, brake pedal. Shift peg?   Looks pretty pricey if you do it.   Stuart.
No just the grips.  I really like the 2019 Floorboards and pegs. 
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on May 05, 2021, 07:37:16 PM
Gotcha.  I think I'll leave the rest of it alone too.  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Twism_23 on May 05, 2021, 08:36:41 PM
Replaced my plastic manifold with the new cast S&S 55mm manifold.
Title: Re: What did you do to or on your CVO today?
Post by: Mr D on May 08, 2021, 10:35:45 PM
Replaced my plastic manifold with the new cast S&S 55mm manifold.

What made you choose S&S over the Mo Co manifold ?
Title: Re: What did you do to or on your CVO today?
Post by: Twism_23 on May 08, 2021, 10:41:28 PM
What made you choose S&S over the Mo Co manifold ?
Honestly, availability. Every time I went to purchase the SE 55mm manifold it was out of stock. The S&S one was available on the Fuel Moto site so I bought it.
Title: Re: What did you do to or on your CVO today?
Post by: Twism_23 on May 09, 2021, 12:08:47 AM
Added these finally.
Title: Re: What did you do to or on your CVO today?
Post by: CPD on May 11, 2021, 07:53:48 PM
Finished installing 14" Factory 47 bars(https://uploads.tapatalk-cdn.com/20210406/7ca78c1cf3c675ce4a8fd09dc4e555d3.jpg)

Sent from my SM-G988U using Tapatalk
Doing the same soon. Did the brake cable need to be changed?


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on May 12, 2021, 07:08:37 PM
I have 14s.  Stock wires and cables work fine. Stuart
Title: Re: What did you do to or on your CVO today?
Post by: OBB on May 13, 2021, 06:15:46 AM
I have 14s.  Stock wires and cables work fine. Stuart
His is a 2021 which has a cable clutch and may indeed need an extension.


Title: Re: What did you do to or on your CVO today?
Post by: OBB on May 13, 2021, 06:18:15 AM
Doing the same soon. Did the brake cable need to be changed?


Sent from my iPhone using Tapatalk
reply # 6259 has your answer. He had to buy an extensions from fatbaggers.com as the stock clutch line was about 2" short.
Title: Re: What did you do to or on your CVO today?
Post by: TN on May 13, 2021, 06:27:11 AM
Adjusted my inverted 330mm Bitubos  :orange:
Title: Re: What did you do to or on your CVO today?
Post by: TN on May 19, 2021, 09:18:43 PM
 Installed a new battery and serviced my jiffy stand.  :bananarock:


Title: Re: What did you do to or on your CVO today?
Post by: Yellow09SERG on May 19, 2021, 09:28:22 PM
Me and it both got rained on. But it was still a ride!
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on May 20, 2021, 07:28:02 AM
Rode it up to the Bunch Marine to get the stuff to do an oil change on the boat, nice 45 mile ride.
Title: Re: What did you do to or on your CVO today?
Post by: DCFIREMANN on May 20, 2021, 09:32:32 AM
Rode my 2020 CVO Limited. Breaking in the new 131ci build. So far I am vey impressed. Can't wait to get the Ole Girl on the Dyno!!!!

Be Safe

THE DAWG
Title: Re: What did you do to or on your CVO today?
Post by: CPD on May 21, 2021, 06:48:24 PM
reply # 6259 has your answer. He had to buy an extensions from fatbaggers.com as the stock clutch line was about 2" short.
Thanks. I ordered that awhile ago. Was asking about the brake cable.


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on May 22, 2021, 07:05:58 AM
Moved the CVO King, so I could get Ol' Blue the Fatboy out and ride it.  Put 160 miles on Ol' Blue.  Going to ride Red Pepper on a Club run later today.
Title: Re: What did you do to or on your CVO today?
Post by: kevin_n on May 22, 2021, 10:59:58 PM
Went for a nice 280 mile ride with the new bars. I am happy with them but I think 10s would’ve been ok, not changing them out though  ;D
Title: Re: What did you do to or on your CVO today?
Post by: SouthwestCVO on May 23, 2021, 08:58:22 PM
Thanks. I ordered that awhile ago. Was asking about the brake cable.


Sent from my iPhone using Tapatalk
Sorry, I'm not on here much. I was able to pull enough slack to mount the brake lever without modifications.

Sent from my SM-G988U using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on May 23, 2021, 11:28:12 PM
After many years of not fixing something that was never broken finally had to (slightly) adjust the Bitubo shocks on the back of the Road Glide.  Had noticed that clearing the kickstand was ever so slightly more of a problem.  At first blamed it on the fact that I was now officially old.  Then couldn't figure out any way that lowered the bike.  So adjusted the stupid shocks.
Title: Re: What did you do to or on your CVO today?
Post by: TN on May 25, 2021, 07:37:19 AM
Replaced front top stabilizer link.

Title: Re: What did you do to or on your CVO today?
Post by: OBB on May 25, 2021, 09:10:45 AM
Replaced front top stabilizer link.
Too dirty for ya and ya couldn't reach it??

sent using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: SIKBIRD on May 25, 2021, 09:48:04 AM
Lower left speaker quit working, thought the wires came loose from the amp (has happened before) took the fairing off only to find that the wires were all still connected.  Wish I would have pulled the lower speaker first, would have saved me a bunch of trouble!  Anyway this little thingy broke loose and caused my speaker to stop working.  Got another set from my brother, just gotta install and Button her back up.
Title: Re: What did you do to or on your CVO today?
Post by: RivRaptor on May 25, 2021, 11:47:07 AM
That's a capacitor its used as a "crossover".  It's used to cut out lower frequencies "bass" that the speaker is not designed to reproduce giving the speaker a clearer sound reproduction.
Title: Re: What did you do to or on your CVO today?
Post by: SIKBIRD on May 25, 2021, 12:26:11 PM
That's a capacitor its used as a "crossover".  It's used to cut out lower frequencies "bass" that the speaker is not designed to reproduce giving the speaker a clearer sound reproduction.

Ok, thanks for the info.  It’s a two-way speaker so I wonder if it’s used to crossover to the tweeter or vise versa.  Maybe not but I was able to make the speaker “work” by touching the speaker wires to the outer posts that the crossover was soldered to...not sure if it was the tweeter or woofer that was working but it was making some sound.
Title: Re: What did you do to or on your CVO today?
Post by: KGB on May 25, 2021, 04:27:53 PM
Replaced front top stabilizer link.
(https://uploads.tapatalk-cdn.com/20210525/848bce50380656dd1338de30781aee49.jpg)

This was from my 2015 SGS, the swivel froze in the link and then the bolt broke, it was a nice ride home from the Smoky Mountains!


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: TN on May 26, 2021, 06:57:34 AM
This was from my 2015 SGS, the swivel froze in the link and then the bolt broke, it was a nice ride home from the Smoky Mountains!


Sent from my iPhone using Tapatalk

 That grade 8 bolt sheared off.  :o

The OEM looks like a heim joint on the ends but it’s not, there is a rubber bushing in there and it really isn’t meant to swivel, that is why I’m replacing mine because the rubber is wore out and I can swivel it with two fingers.
Title: Re: What did you do to or on your CVO today?
Post by: Twism_23 on May 29, 2021, 11:44:06 PM
Added some smoke Custom Dynamics tail lights to my 19 CVO Street Glide.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on June 04, 2021, 06:20:24 AM
Washed the Red Pepper yesterday, fixed the shifter link that got loose on the shaft next to case.  This morning I have packed my stuff on it for our week end ride to Little Switzerland.  Should be a great week end.  There is a nice ride planned for Saturday also. 
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on June 04, 2021, 08:24:42 PM
packed her up for a trip to Arkansas... heading out in the am, be there for a few days then to lake of the Ozarks. my son wants me to cruse his boat around and buy me dinner  :nixweiss:.... cant argue with him
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on June 04, 2021, 11:21:02 PM
Added some smoke Custom Dynamics tail lights to my 19 CVO Street Glide.

Added those to mine after I was rear ended several months ago. They really look great on our color of bikes but they are not quite as bright as the factory red ones.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on June 07, 2021, 07:25:04 AM
Rode Red Pepper 662 miles of very curvy roads this weekend including BRP, Diamond Back, and Devils Whip.  Owner of local dealer and some of his staff put on the weekend ride.  Also met and talked a lot with a Harley engineer on the Pan America motor.  Great Weekend. 
Title: Re: What did you do to or on your CVO today?
Post by: Mr. Warlock on June 07, 2021, 07:41:46 AM
Also met and talked a lot with a Harley engineer on the Pan America motor

DO Tell.....
Title: Re: What did you do to or on your CVO today?
Post by: kevin_n on June 11, 2021, 11:05:49 PM
Made the final rental payment.  :orange: It is officially mine.
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on June 12, 2021, 01:12:23 AM
Made the final rental payment.  :orange: It is officially mine.

That is absolutely worth a Congratulations!!  :drink:
Title: Re: What did you do to or on your CVO today?
Post by: kevin_n on June 13, 2021, 04:35:48 PM
That is absolutely worth a Congratulations!!  :drink:

Thanks Don. Hopefully we can set that money aside for a new truck now.
Title: Re: What did you do to or on your CVO today?
Post by: TN on June 14, 2021, 07:03:57 AM
Way out yonder is Paris Island
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on June 14, 2021, 08:01:13 AM
Nice 425 mile weekend out to middle TN.  Nice time riding, managed to dodge the bad storms on Saturday.
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on June 14, 2021, 10:58:24 AM
Way out yonder is Paris Island
Oooh Rah!!!!! If you had gotten closer you may have found some sand fleas w/my DNA in them from their parents/grand/great/great-great grand parents... them pesky ***** sure enough bit the hell out of me during my summer there in '75. :huepfenlol2:

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: TN on June 14, 2021, 10:36:46 PM
Oooh Rah!!!!! If you had gotten closer you may have found some sand fleas w/my DNA in them from their parents/grand/great/great-great grand parents... them pesky ***** sure enough bit the hell out of me during my summer there in '75. :huepfenlol2:

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:

 Lots of History there, I use to play golf there on a regular basis.  :D
Title: Re: What did you do to or on your CVO today?
Post by: BigLock on June 15, 2021, 07:51:18 AM
Coming home from Hog rally in Lexington Ky. Saturday . My voltage regulator started failing no further than 100 miles on back roads and 66 miles from Wildcat HD. I'm 8hrs from home.So I started cutting  across 30 miles from dealer it shut bike down so I called dealer and they send a tow truck this is at 10.30 Arrived at dealer at 12.00 pm check in at service and guess what no regulator on hand was told that the service manager was going to take his off and put on my to get my back on the road. WELL 4hrs later and a $250.00 tow bill which ESP paid $200.00 and I paid $50.00 and a $50.00 deductible for a used regulator and the service manager I guess will get the new one. I'm back on the road and arrived home at 1.30 Sunday morning. Started out all back roads but had to take all interstate home.
 
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on June 15, 2021, 06:08:00 PM
Lots of History there, I use to play golf there on a regular basis.  :D
Hmmmmm... my Drill Instructor's never offered that opportunity. :D

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: CVO To Go on June 15, 2021, 06:31:56 PM
After a thorough wash down yesterday afternoon, I went out into the garage this morning armed with rags and microfiber towels and started wiping clean the water spots off the chrome I missed yesterday.  I then got out the 303 Protectant and started spraying and rubbing down the rubber, plastic and vinyl.  Looks like a new bike, at least for a little while.

Dave
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on June 15, 2021, 08:15:50 PM
Rode the Road King to lunch.  Rode the FXR to dinner.  Slept in and blew off breakfast. :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: TN on June 15, 2021, 09:30:20 PM
Hmmmmm... my Drill Instructor's never offered that opportunity. :D

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:

You agreed to their terms when you signed up  :P


Rode the Road King to lunch.  Rode the FXR to dinner.  Slept in and blew off breakfast. :2vrolijk_21:


Living the dream  :pineapple:
Title: Re: What did you do to or on your CVO today?
Post by: TN on June 15, 2021, 09:34:02 PM
After a thorough wash down yesterday afternoon, I went out into the garage this morning armed with rags and microfiber towels and started wiping clean the water spots off the chrome I missed yesterday.  I then got out the 303 Protectant and started spraying and rubbing down the rubber, plastic and vinyl.  Looks like a new bike, at least for a little while.

Dave

I really like the 303 protectant, I buy it by the gallon.  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on June 16, 2021, 07:07:45 AM
I road the CVO Road Glide over to the Dealer, so I could do a Demo on the Pan America.  Very Impressive bike.  Then I rode the CVO back home.  272 mile day.
Title: Re: What did you do to or on your CVO today?
Post by: TN on June 17, 2021, 07:15:38 AM
Searched for a 180-55-18 dunlop AE to no avail, finally found a HD 407 dunlop at a dealer, was scared to ask the price cause it's for a friend that I do tires for and gave him info to retrieve it. I searched for most brands for a 180-55-18 multiple vendors.  :nixweiss:


Someone somewhere is gonna get stuck with a pallet of these things,  :drink: Dunlop is made in the US or so they claim

I got half a pallet of toilet paper I'd swap for a set of tires.  :drink:

BTW this was done for a CVO
 
Title: Re: What did you do to or on your CVO today?
Post by: lyn.husen on June 17, 2021, 08:25:02 AM
Took 6 weeks to get a pair of Dunlop AE’s from my Indy who is Dunlop dealer.
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on June 17, 2021, 05:04:30 PM
I found a new dunlop elite in that size on Amazon. No one else had one. Took a week to arrive. Price was the same as Dennis Kirk. Stuart.
Title: Re: What did you do to or on your CVO today?
Post by: Twism_23 on June 19, 2021, 07:31:12 PM
Switched the fuel pump from my old dented tank to my new one.
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on June 20, 2021, 12:39:53 AM
Messed around on all three.  It was a nice day.

Late breakfast FXR

Late afternoon dinner/lunch SERK

Nice evening ride to nowhere in particular SERG.

Then cleaned off bugs (most of 'em).

It really is in your best interest not to piss any of them off by making them feel slighted.
Title: Re: What did you do to or on your CVO today?
Post by: VMAX-VROD on June 20, 2021, 02:43:13 AM
Messed around on all three.  It was a nice day.

Late breakfast FXR

Late afternoon dinner/lunch SERK

Nice evening ride to nowhere in particular SERG.

Then cleaned off bugs (most of 'em).

It really is in your best interest not to piss any of them off by making them feel slighted.

That’s a nice rotation. Is the FXR usually the breakfast steed?
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on June 20, 2021, 12:35:08 PM
That’s a nice rotation. Is the FXR usually the breakfast steed?


Often not.  When the weather is very warm it'll be what goes out in the hottest part of the day.  It and the Road King are the cooler bikes to ride.  The Road Glide can get just a little warm if you're waiting in traffic very long.  Fortunately a ride to food is rarely just a few minutes in town.  No fun in that.  Have to go a little while to get wherever is the target.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on June 21, 2021, 09:14:26 AM
Rode Red Pepper to Athens GA Saturday and home Sunday, 389 mile round trip.  Was suppose to be miserable weather both days, but light springs Saturday, and 1/2 hour rain at start Sunday, other than that nice and not miserable hot.
Title: Re: What did you do to or on your CVO today?
Post by: TN on June 21, 2021, 03:58:07 PM
Tried a new butt pad out. Alaska leather.

Title: Re: What did you do to or on your CVO today?
Post by: VMAX-VROD on June 21, 2021, 04:37:50 PM
Tried a new butt pad out. Alaska leather.

The ‘09 just keeps hummin’ right along. Definitely a favorite of mine.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on June 23, 2021, 06:46:48 AM
I rode my 2019 CVO RG over to SHMD so they had it first thing this AM to start the 50K service on the bike. 

Will ride something else over there today for a cigar and to see how its going.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on June 26, 2021, 06:41:52 AM
Picked her up from the 50K Service, gave her a nice ride and all seems well with her.  Ready for the next 50K I hope.  Also did my first test on the new Sena HD speakers I installed in my helmet yesterday and updated the Sena software.
Title: Re: What did you do to or on your CVO today?
Post by: CVO To Go on June 26, 2021, 08:26:17 AM
I took the bike out of the garage and gave it a quick wash and dry.  With all the chrome, I don't know what's worse, dirt or water spots.

Dave
Title: Re: What did you do to or on your CVO today?
Post by: SIKBIRD on June 26, 2021, 09:43:09 AM
I took the bike out of the garage and gave it a quick wash and dry.  With all the chrome, I don't know what's worse, dirt or water spots.

Dave

I just bought a Camco RV water filter ($17 on EBay) that connects to my hose pipe…haven’t had a chance to use it yet but all the reviews claim that it makes a huge difference with removing the minerals that cause waterspots.
Title: Re: What did you do to or on your CVO today?
Post by: TN on June 29, 2021, 11:45:13 AM
Knocked the dirt off her  :pineapple:
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on June 30, 2021, 06:58:38 AM
Rode it to do a few errands in town, just over 55 miles
Title: Re: What did you do to or on your CVO today?
Post by: HOGMIKE on June 30, 2021, 08:26:31 AM
Had to put the bikes on battery tenders and up on the lifts.
Won’t be riding for a few weeks=hand surgery.
 >:(
Title: Re: What did you do to or on your CVO today?
Post by: TN on July 01, 2021, 06:57:28 AM
Had to put the bikes on battery tenders and up on the lifts.
Won’t be riding for a few weeks=hand surgery.
 >:(

Wishing you a speedy recovery.
Title: Re: What did you do to or on your CVO today?
Post by: CVO To Go on July 01, 2021, 07:50:32 AM
I finally took the bike to the HD dealer because of my radio cutting out intermittently.  I found a few things that may have been the issue such as the CB and weather band being on along with the antennas not installed in their correct position but alas no cigar.  It's in their ballpark now so I hope they hit a home run on this one.

Dave
Title: Re: What did you do to or on your CVO today?
Post by: glinkmeyer on July 01, 2021, 10:07:11 AM
I finally took the bike to the HD dealer because of my radio cutting out intermittently.  I found a few things that may have been the issue such as the CB and weather band being on along with the antennas not installed in their correct position but alas no cigar.  It's in their ballpark now so I hope they hit a home run on this one.

Dave
I use the CB a lot in the club I ride with and if your CB is on and your squelch is set on a low setting it will cut the radio out for the transmission. Don’t know if you can turn off weather Band, but if your HD dealership is able to turn off weather band I would like to know. My radio jumps to weather band for no reason at all and I have to  manually switch back to radio. My 16 and 19 CVO Ultra never did that, my 20 CVO Ultra dose and my dealership doesn’t know how to stop that happening.


Sent from my iPad using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: CVO To Go on July 01, 2021, 07:50:12 PM
I got a call from the HD dealership today that my bike was ready for pickup.  He stated that they think I had nav software that had been corrupted somehow from an upload or download and kept interrupting the radio to "give direction".  He said they were able to remove or erase it. Pretty wild, but I guess when it comes to software and computers anything is possible.  I'm happy they didn't have to tear the bike apart to try to find the problem.

Dave
Title: Re: What did you do to or on your CVO today?
Post by: glinkmeyer on July 01, 2021, 08:53:56 PM
I got a call from the HD dealership today that my bike was ready for pickup.  He stated that they think I had nav software that had been corrupted somehow from an upload or download and kept interrupting the radio to "give direction".  He said they were able to remove or erase it. Pretty wild, but I guess when it comes to software and computers anything is possible.  I'm happy they didn't have to tear the bike apart to try to find the problem.

Dave
Hope it all works for you.


Sent from my iPad using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on July 02, 2021, 08:21:26 AM
Installed new rear tire on the 19 CVO yesterday at a friends house.
Title: Re: What did you do to or on your CVO today?
Post by: Mr. Warlock on July 03, 2021, 05:52:59 AM
Installed new rear tire on the 19 CVO yesterday at a friends house.
Curious as to what you did about balancing it?
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on July 03, 2021, 07:55:29 AM
Curious as to what you did about balancing it?

He has a stand we can static balance it on.  No vibration or bounce up to 110. 
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on July 03, 2021, 07:59:14 AM
I hit 50K miles in pulling up and out of my driveway yesterday on the 2019 CVO RG.  In the 30 months since I bought it new, I spent 2 months in the hospital.  Before that I was hit by a woman on a cell and bike spent 2 months in shop.  So, those miles are in 26 months.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on July 03, 2021, 08:01:44 AM
close up
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on July 03, 2021, 10:29:12 AM
close up
   :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: CVO To Go on July 05, 2021, 02:49:11 PM
I got a call from the HD dealership today that my bike was ready for pickup.  He stated that they think I had nav software that had been corrupted somehow from an upload or download and kept interrupting the radio to "give direction".  He said they were able to remove or erase it. Pretty wild, but I guess when it comes to software and computers anything is possible.  I'm happy they didn't have to tear the bike apart to try to find the problem.

Dave
Sorry I didn't respond earlier to your question regarding shutting off the weather bands.  Yes, you can shut it off.  I looked in the infotainment owner's manual and it does show you how to shut it off.  I too noticed on at least one occasion (prior to my shutting it off) when the radio display did revert to the weather band display.

Dave
Title: Re: What did you do to or on your CVO today?
Post by: TimP on July 05, 2021, 09:21:00 PM
close up

That's impressive Dave :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on July 07, 2021, 06:12:12 AM
Loading the 19 CVO road Glide for a little trip.  Heading up to NH for a few days, then to Front Royal for my wife's WITW annual meeting.  Hopefully a fun 11 days.
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on July 07, 2021, 06:15:59 AM
Have a great trip Dave.  :2vrolijk_21:Stuart
Title: Re: What did you do to or on your CVO today?
Post by: CVO To Go on July 07, 2021, 02:07:25 PM
I sprayed PB Blaster on the rusty bolts holding on the factory slip-ons.  Hopefully I'll get the Cobra 909 pipes delivered on Friday for a quick install.

Dave
Title: Re: What did you do to or on your CVO today?
Post by: TN on July 12, 2021, 04:17:22 PM
My lunch spot today  :orange:

Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on July 13, 2021, 03:46:42 PM
My lunch spot today  :orange:
nice , what do think about that seat cover after a few miles… been thinking bout getting one myself
Title: Re: What did you do to or on your CVO today?
Post by: 99 Blue flame on July 13, 2021, 08:07:24 PM
 Took my new to me FXR3 in for a 5,000 miles service. I have put over 1,000 miles on it since I got it 2 months ago.
Title: Re: What did you do to or on your CVO today?
Post by: BigLock on July 14, 2021, 08:39:01 PM
Changed the oil in Emma Jane yesterday. Just got done loading her up leaving in the morning heading
up to Maggie Valley for 7days
Title: Re: What did you do to or on your CVO today?
Post by: HOGMIKE on July 15, 2021, 07:30:32 AM
I got to ride the 2019 yesterday, first time in 3 weeks!
Hand surgery went ok, a little sore still but it was nice to get the new bike out for a bit.

Today: long ride with some friends.
 :bananarock:
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on July 20, 2021, 06:23:04 AM
Well, my trip did not go as planned.  Motor failed on long Island 10 miles before the Orient Point Ferry.  Not sure yet what left go.  4 hours to get a tow, HOG never did get me a tow.

You can not rent a pick up, box van or trailer leaving Long Island or NYC.  They want a 3 week notice for a one way rental.  Its 2600 dollars one way to TN.  Took 15 phone calls to find a one way car rental.  So I drove home Sunday.  Tuesday I rode the King up to Front Royal to enjoy the rest of our trip with my wife.

Leaving in 30 minutes in a pick up to drive back to Long Island to get the Road Glide and bring it home Wednesday.  815 or so miles each way.
Title: Re: What did you do to or on your CVO today?
Post by: BigLock on July 20, 2021, 07:43:55 AM
Sad to hear Dave I know the feeling of being broke down on a trip. Hope all goes well and the RG not to bad.
Title: Re: What did you do to or on your CVO today?
Post by: HOGMIKE on July 20, 2021, 09:21:37 AM
Well, my trip did not go as planned.  Motor failed on long Island 10 miles before the Orient Point Ferry.  Not sure yet what left go.  4 hours to get a tow, HOG never did get me a tow.

You can not rent a pick up, box van or trailer leaving Long Island or NYC.  They want a 3 week notice for a one way rental.  Its 2600 dollars one way to TN.  Took 15 phone calls to find a one way car rental.  So I drove home Sunday.  Tuesday I rode the King up to Front Royal to enjoy the rest of our trip with my wife.

Leaving in 30 minutes in a pick up to drive back to Long Island to get the Road Glide and bring it home Wednesday.  815 or so miles each way.



Sorry to hear about your misfortune!
I think we’ve all been there one time or another and put a damper on a trip.

Just for future reference, and depending on the conditions I don’t rely on tow companies or insurance companies to get me home. U-haul will rent me a very nice motorcycle trailer here for $14.00 a day and hook it up to my van or a buddies pickup and we bring it back to my place. Lot cheaper and MUCH better service! Of course things can be much different way out of town.

Let us know what you find out on your engine and good luck!👍
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on July 20, 2021, 11:45:29 AM
Well, my trip did not go as planned.  Motor failed on long Island 10 miles before the Orient Point Ferry.  Not sure yet what left go.  4 hours to get a tow, HOG never did get me a tow.

You can not rent a pick up, box van or trailer leaving Long Island or NYC.  They want a 3 week notice for a one way rental.  Its 2600 dollars one way to TN.  Took 15 phone calls to find a one way car rental.  So I drove home Sunday.  Tuesday I rode the King up to Front Royal to enjoy the rest of our trip with my wife.

Leaving in 30 minutes in a pick up to drive back to Long Island to get the Road Glide and bring it home Wednesday.  815 or so miles each way.


That sucks. Sorry man.  Strictly for the "misery loves company" component this is the third story I've heard this year of HOG roadside assistance being not just poor but useless.  Will be curious about what happened in the engine.  Safe trip to bring it home.
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on July 20, 2021, 04:09:12 PM
Wow Dave that sucks! Sorry to hear that.

Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on July 20, 2021, 04:21:16 PM
I did get my bike out yesterday for it's first major outing since my 128" build and it performed flawlessly. I went from my home in Marysville over Stevens pass and had lunch at Rusty's in Cashmere. When I left home it was about 70 degrees, a couple hours later it was over 95 in Cashmere! So with mountain passes and major temperature changes the bike did awesome!

I did have one minor hiccup though. I lost a cover plate from my right lower fairing somewhere along the way  :zwtf:
and ordered a new one this morning.
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on July 20, 2021, 09:06:54 PM
On the old FXR2 today.  Removed the saddle and installed a Badlands modules.  So more lighting.  The better part was more brighter lighting, especially in the front. 

Changed out the amber lenses for smoked lenses in the front and red ones in back with bright red LEDs all over the back now.  In the front went some amber LEDs that also included an outer ring of bright white lights.  Gives the effect of a DRL.  I honestly didn't expect much.  The little f$%*ers are awesome!
Title: Re: What did you do to or on your CVO today?
Post by: CVODON on July 21, 2021, 05:58:56 PM
Not defending HOG, I no longer am a member, but they are not the only one having a hard time dispatching a tow truck. I heard of AAA wait times of 4+ hours in the Tampa area on a regular basis. Tow companies are still willing to sign-up with the Services but the recoup is so low they only respond when absolutely no other tows are available. Have some friends that operate tow company, their drivers will not respond, especially  at night, to any kind of service tow. Pay is so low they just ignore the calls.
I pay for tow & labor thru my insurance plus it's included on our new cars but I pray to not have to use it.
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on July 21, 2021, 09:54:52 PM
Really sorry to hear about your troubles Dave.  Please let us know what the issue was.  Hope things work out. Stuart. 😩😣
Title: Re: What did you do to or on your CVO today?
Post by: TN on July 22, 2021, 06:53:09 AM
Letting her rest for a few days, she got rode over 2k miles in WV plus to and fro without missing a beat. 


I may need some rest too  :drink:
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on July 22, 2021, 08:27:44 AM
Well drove up to Long Island New York Tuesday, got there about 8 PM.  Loaded bike into Pick up at 9:00 AM and on the road at 9:30.  I-81 south bound shut down all lanes south around Front Royal.  Every one tries to take US 11 south it was a parking lot.  Found a 1.5 lane country road going south, took it 20 miles and got back on I-81 south.  Got home about 11:45.  Will take bike to dealer today to un-load from truck.  Then put on trailer to were we will tear it apart.  1750 miles in two days for the bike
Title: Re: What did you do to or on your CVO today?
Post by: Boatman on July 22, 2021, 12:27:46 PM
Letting her rest for a few days, she got rode over 2k miles in WV plus to and fro without missing a beat. 


I may need some rest too  :drink:

Had to go back to work to rest up Phil from WV gathering. .  I know “you didn’t retire you quit 3-7-10” or there about  but some still work.
 :cherry: :cherry:
Title: Re: What did you do to or on your CVO today?
Post by: TN on July 22, 2021, 10:12:42 PM
Had to go back to work to rest up Phil from WV gathering. .  I know “you didn’t retire you quit 3-7-10” or there about  but some still work.
 :cherry: :cherry:

Bob it was nice seeing ya again, make it more often sir.  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on July 24, 2021, 07:49:16 AM
Determined rear cylinder exhaust valve spring broke and caused my breakdown.  28,155 miles on it after the build.  Pictures in thread on its motor in M8 section.  Also rode the CVO King to club house fo meeting.
Title: Re: What did you do to or on your CVO today?
Post by: HOGMIKE on July 24, 2021, 08:20:07 AM
Determined rear cylinder exhaust valve spring broke and caused my breakdown.  28,155 miles on it after the build.  Pictures in thread on its motor in M8 section.  Also rode the CVO King to club house fo meeting.

Dave, that sucks! BUT you have a bunch of miles on that build.

I passed on the ESP figuring I could fix whatever happens on my build with that money and rolling the dice that the motor lasts.

When I upgraded the motor and addressed the clutch issues all was good UNTIL my trans failed after about 8k miles on the build. I don’t hammer on my bikes but I do use the power! I “babied” third gear roll ons figuring that is one of the weak links in the stock transmission. Sixth gear dogs and shift forks were the issue. Seems sloppy fitting gears and assorted parts are to blame.

Baker grudge box builder kit on the way! LOL
I’m not looking forward to updating the primary and rear drive, but we’ll see.
Good luck getting yours back on the road!

 :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: TN on July 25, 2021, 06:23:08 AM
Went for a ride in the heat of the day without the tourpak, the handling is night and day different.

Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on July 28, 2021, 07:22:40 AM
Road the 13 CVO King 135 miles. 
Title: Re: What did you do to or on your CVO today?
Post by: yardstick on July 29, 2021, 05:53:41 PM
Took heavy breather off and replaced with extreme round A/C with ratchet cover.  Changed passenger pegs to kahuna floorboards, installed 2.25 in fullsac baffles, added sissybar and pad and replaced siren with the siren/pager
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on July 30, 2021, 07:43:16 AM
Yesterday got the Head gasket and intake manifold gasket ordered.  Road the CVO King 253 miles, some doing errands than to a meeting of area club bosses. 
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on July 30, 2021, 04:34:26 PM
Took heavy breather off and replaced with extreme round A/C with ratchet cover.  Changed passenger pegs to kahuna floorboards, installed 2.25 in fullsac baffles, added sissybar and pad and replaced siren with the siren/pager

Someone has been busy!

 :worthless:
Title: Re: What did you do to or on your CVO today?
Post by: TN on July 31, 2021, 06:38:23 AM
Replaced rear fascia, no more bullet hole  :drink:

Title: Re: What did you do to or on your CVO today?
Post by: HOGMIKE on August 01, 2021, 09:18:50 AM
Replaced my broken gearset with Baker yesterday.
Going on a club ride this morning to see if I forgot anything! LOL
Title: Re: What did you do to or on your CVO today?
Post by: HOGMIKE on August 01, 2021, 09:20:02 AM
New one…..
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on August 01, 2021, 05:58:17 PM
New brakes front and rear. Changed all fluids on the 16.  Nice ride to Sebring FL yesterday. Now I have a temp issue going on. Try to get to the dealer in the morning.  :nervous:
Title: Re: What did you do to or on your CVO today?
Post by: HOGMIKE on August 03, 2021, 05:39:57 PM
New one…..

Put on a couple hundred miles on the new Baker trans. Gear ratios are just a little different so that my favorite gear on my favorite route is going to be either the next gear or a lower one depending on the RPM.
Overall, it’s pretty nice, a little gear whine on decel in some gears, 6th is for 75 and higher, shifting is not as smooth and quiet as my OD6 in my other bike but that may change with more miles.

Thanks for Steve and the guys at TTS to help me get the cruise working in 3,4,6 gears! I’m not computer literate!

Thanks to Linda and Baker for shipping it out so quickly and getting it done in a week.

 :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: KGB on August 03, 2021, 06:09:36 PM
Replaced rear fascia, no more bullet hole  :drink:
I kinda liked the bullet hole, gave it
character and it shows your bike is fast enough to get out of wherever the bullet came from!


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on August 03, 2021, 07:27:48 PM
New water pump and sensor replaced on the 16.  Also new steering neck bearings and a new front tire.   It's ready. Can't wait to see this bill.  😨😨😩. Stuart
Title: Re: What did you do to or on your CVO today?
Post by: Jock on August 03, 2021, 08:17:04 PM
New water pump and sensor replaced on the 16.  Also new steering neck bearings and a new front tire.   It's ready. Can't wait to see this bill.  😨😨😩. Stuart

Stu,

With all that work you need to come to The Valley this year!  See ya there!
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on August 03, 2021, 10:11:52 PM
Sounds good Jock. I wish I had the time. I have a trip planned for new England coming up in 2 weeks. Wish all the best for whoever is heading to Maggie Valley.  👌Stuart
Title: Re: What did you do to or on your CVO today?
Post by: TN on August 05, 2021, 07:41:03 AM
Morning ride to start the day  :orange:
Title: Re: What did you do to or on your CVO today?
Post by: TN on August 10, 2021, 01:01:30 PM
New wheel, tire, and components. Will get mounted on bike soon.


Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on August 10, 2021, 06:12:07 PM
300 miles on the FXR.  Got a sunburn up on top.  Always forget to put sunscreen up on top.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on August 10, 2021, 09:07:40 PM
New wheel, tire, and components. Will get mounted on bike soon.
Ooohhhhh.   Phil's rolling a fatty. Gonna look good.

sent using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on August 10, 2021, 10:26:35 PM
Rolled 59k riding thru West Virginia … been on the road 11 days and having a blast
Title: Re: What did you do to or on your CVO today?
Post by: DCFIREMANN on August 10, 2021, 10:36:54 PM
Well today I replaced my D&D Billet Cat with a Fullsac MX pipe and 2.25 cores. Installed a Trax transmission top vented cover. And I took my stock ECM with the HD Street Tuner installed and replaced it with a Thunder Max. It was a long afternoon but I am finally finished. While the tune is not perfect. The bike is running so much cooler.

Be Safe

THE DAWG
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on August 11, 2021, 01:08:17 AM
Been noticing my throttle grip feeling a little notchy, so I made an appointment to have it replaced at a little over 52K. Getting close to my second oil change on my 128 build. Everything is feeling and looking great on the build and tune.

Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on August 11, 2021, 01:11:39 AM
New wheel, tire, and components. Will get mounted on bike soon.

Is that going up front for a fat tire conversion or is that a new rear tire and wheel TN?

Also, looks like you and I have the same lift! Good for you.
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on August 11, 2021, 05:55:54 AM
Looks like a rear from here
Title: Re: What did you do to or on your CVO today?
Post by: TN on August 11, 2021, 06:38:45 AM
New grips too  :orange:

Title: Re: What did you do to or on your CVO today?
Post by: HOGMIKE on August 11, 2021, 08:18:19 AM
Tires and 40000 mile service on the 2019 yesterday, 500 miles on the new transmission.
I’m getting ready for some long trips starting next month.
 8)
Title: Re: What did you do to or on your CVO today?
Post by: KGB on August 11, 2021, 11:53:37 AM
Tires and 40000 mile service on the 2019 yesterday, 500 miles on the new transmission.
I’m getting ready for some long trips starting next month.
 8)
Where did you get the tires? Having hard time finding them


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: HOGMIKE on August 11, 2021, 01:00:44 PM
Where did you get the tires? Having hard time finding them


Sent from my iPhone using Tapatalk

Got them from our dealership last month when I realized there was a shortage coming from my regular sources. Prices then were only a couple bucks more.
18 rear and 19 front are kind of an odd size in AE brand.
 8)
Title: Re: What did you do to or on your CVO today?
Post by: KGB on August 11, 2021, 01:19:29 PM
Got them from our dealership last month when I realized there was a shortage coming from my regular sources. Prices then were only a couple bucks more.
18 rear and 19 front are kind of an odd size in AE brand.
 8)

Ah, guess I should have done the same thing, I get mine from American Moto Tire online, I have been buy from them for four years, I did get an order in, but they emailed me stating they don't know what happened, but their warehouse was incorrect, I received another email on Monday that he expects a supply within two weeks, so we shall see.
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on August 19, 2021, 07:18:27 PM
I noticed my throttle getting notchy over the last several months and not getting any better, so I finally took it in today and had the throttle grip sensor replaced. $500.00 later it's back to being smooth as silk.
Title: Re: What did you do to or on your CVO today?
Post by: TN on August 19, 2021, 09:46:49 PM
Replaced clutch line o-ring to contain the brake fluid that was leaking out, it only lasted twelve years. I’ll be proactive next time and replace it again in ten years.  :drink:

Title: Re: What did you do to or on your CVO today?
Post by: KGB on August 22, 2021, 01:38:53 PM
Got them from our dealership last month when I realized there was a shortage coming from my regular sources. Prices then were only a couple bucks more.
18 rear and 19 front are kind of an odd size in AE brand.
 8)
Well got a rear AE, the front can go a little longer, but there saying Tuesday they should have it


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Rodogg on August 26, 2021, 09:24:44 PM
nothing cause the tuner isn't working with the bike. New tuner cause older one from 08 isn't supported by Harley anymore. 08 dyna fxdc not the anniversary CVO but has the 110 CVO engine on it. Wicked fast, loads up& putters 2-3 k, 3k up terrific. new tuner isn't hooking up to the software. Does anyone know if the 110 came with the 64mm throttle body?
Title: Re: What did you do to or on your CVO today?
Post by: GKroadking on August 27, 2021, 03:33:06 AM
nothing cause the tuner isn't working with the bike. New tuner cause older one from 08 isn't supported by Harley anymore. 08 dyna fxdc not the anniversary CVO but has the 110 CVO engine on it. Wicked fast, loads up& putters 2-3 k, 3k up terrific. new tuner isn't hooking up to the software. Does anyone know if the 110 came with the 64mm throttle body?

I guess the 110cui comes with standard 50mm throttle body. The 117cui-Upgrade Kit contains a 58mm body  8)
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on August 27, 2021, 07:05:34 AM
With the help of a great friend, started putting the 19 SERG back together.  Got the heads on, valve train adjusted, intake on and so on.  New plugs and wires installed except left front plug wire, the only part that has not come in yet.  Once I get it need to instal breather, tank, bags and seat. 
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on August 27, 2021, 07:06:09 AM
Getting there
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on August 27, 2021, 07:06:49 AM
Waiting on new left front plug wire
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on August 27, 2021, 03:32:24 PM
Lookin good Dave! I picked up a set of the Screamin Eagle plug wires for replacements. Should add about 25 HP and 30 lb ft of tq.  :bananarock: LOL. They do look cool and they were readily available.  :nixweiss:
Glad you're making progress.

Keep us posted.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on September 02, 2021, 08:14:45 AM
Installed left front plug wire yesterday after it came in.  Finished putting the bike back together.  Bike fired right up, ran just like before.  Put 62 miles on it.

Going to wash it today, lots of bugs from trip we were on when it broke the valve spring.
Title: Re: What did you do to or on your CVO today?
Post by: HOGMIKE on September 02, 2021, 08:42:24 AM
Good to hear that you got everything done and on the road again!

We’re looking at our annual trip to Reno in a week or so (hopefully they will get all the fires out).
My bike now has about 10 K on the new engine and is running great! I’m hoping for many more miles without issues.
I’ll get more miles on the new grudgebox to see if it will hold up better that the weak stock box.

I think I’ll keep the old gear set and just rebuild it a little more stout than stock just in case myself or one of my friends breaks theirs! LOL

Happy motoring.
 8)
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on September 03, 2021, 08:16:27 AM
Detailed her yesterday morning.  Took her for a short 44 mile round trip ride to grocery store.  Once home and cooled, tightened exhaust flange nuts again.
Title: Re: What did you do to or on your CVO today?
Post by: TN on September 05, 2021, 08:53:23 AM
Good news about the bike up and running   :2vrolijk_21:


Days are getting shorter  :pineapple:

Title: Re: What did you do to or on your CVO today?
Post by: phato1 on September 05, 2021, 11:26:18 AM
Signed over the title and put it on a trailer. It's headed for the left coast today when HaulBikes meets me so they can transport it to the new owner.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on September 05, 2021, 01:30:48 PM
Signed over the title and put it on a trailer. It's headed for the left coast today when HaulBikes meets me so they can transport it to the new owner.
Getting another one or done riding?

sent using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on September 05, 2021, 01:49:38 PM
Not a CVO but I guess it was inevitable with a 160HP 126ci engine. 2nd to 3rd shift wide open around 6500 rpm.

Sent from my SM-N975U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on September 05, 2021, 03:41:00 PM
Not a CVO but I guess it was inevitable with a 160HP 126ci engine. 2nd to 3rd shift wide open around 6500 rpm.

Sent from my SM-N975U using Tapatalk


And do we spell, "o o p s"?


With 160 you earned it :2vrolijk_21: :drink: .
Title: Re: What did you do to or on your CVO today?
Post by: phato1 on September 05, 2021, 04:00:08 PM
Getting another one or done riding?

sent using Tapatalk

I still have my '01 Fatboy so we're not done with riding just yet. As far as replacing the CVO  :nixweiss: I haven't quite decided on that yet. We have the wife's '11 Lexus IS convertible in the garage too, so I'm not in any hurry to decide.

I'll hang around here for a while and if I decide not to replace the CVO I'll just quietly fade away  :drink: .............
Title: Re: What did you do to or on your CVO today?
Post by: OBB on September 05, 2021, 06:09:54 PM
I still have my '01 Fatboy so we're not done with riding just yet. As far as replacing the CVO  :nixweiss: I haven't quite decided on that yet. We have the wife's '11 Lexus IS convertible in the garage too, so I'm not in any hurry to decide.

I'll hang around here for a while and if I decide not to replace the CVO I'll just quietly fade away  :drink: .............
Ain't no fading away or even hiding for that matter. Many members still in here that aren't riding or have a CVO. Gotta stick around and make the MV when you guys can.

sent using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: HOGMIKE on September 05, 2021, 06:46:11 PM
Not a CVO but I guess it was inevitable with a 160HP 126ci engine. 2nd to 3rd shift wide open around 6500 rpm.

Sent from my SM-N975U using Tapatalk

I feel your pain! ($$$). Mine wasn’t that bad.
I’ll keep my old gear set and just replace the bad parts. I’m sure one of our riders will need it soon! LOL
I went with the Baker and am quite satisfied.
 8)
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on September 06, 2021, 06:55:09 AM
Wow.  Those are ripped clean off.  New gear set going in now?
Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on September 06, 2021, 07:06:06 AM
Wow.  Those are ripped clean off.  New gear set going in now?
New gear set installed. Waiting on a few gaskets.

Sent from my SM-N975U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on September 07, 2021, 07:11:12 AM
New gear set installed. Waiting on a few gaskets.

Sent from my SM-N975U using Tapatalk
I hope the gaskets show up soon for you.
Title: Re: What did you do to or on your CVO today?
Post by: DCFIREMANN on September 09, 2021, 06:00:04 AM
Replacing the Boom 1 stereo system and replacing it with a 500 watt Harmon Karda system. Can't wait to get it finished later today or early tomorrow.

Be Safe

THE DAWG
Title: Re: What did you do to or on your CVO today?
Post by: lyn.husen on September 09, 2021, 08:57:18 AM
Replaced regulator for second time in 4 months, first one was faulty from factory. This one checks out fine, only took 13 weeks to get here.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on September 14, 2021, 07:05:34 AM
Well, I put 95 miles on the CVO Road Glide, rode it to the DR, then Knoxville to pick up some stuff.  On the way home got a phone call, the Pan America I ordered showed up.  So I went home.  Got on the 13 CVO Road King and rode the 57 miles to the Dealer.  Traded the 13 King on the Pan America Special.  Then rode the Special home.

Title: Re: What did you do to or on your CVO today?
Post by: HOGMIKE on September 14, 2021, 07:34:00 AM
Enjoy!

A few of our guys have bought those, and a couple even took them off road!
They seem to like them. To each his own.

Doesn’t call out to me though. I’m down to 3 bikes for a while, maybe.sell the evo this winter.  :nixweiss:
I’m liking the 2019 cvo now that I have it sorted out!

 8)
Title: Re: What did you do to or on your CVO today?
Post by: cvosjoe on September 14, 2021, 07:56:19 AM
Well, I put 95 miles on the CVO Road Glide, rode it to the DR, then Knoxville to pick up some stuff.  On the way home got a phone call, the Pan America I ordered showed up.  So I went home.  Got on the 13 CVO Road King and rode the 57 miles to the Dealer.  Traded the 13 King on the Pan America Special.  Then rode the Special home.
Miles of smiles! Congratulations!

Sent from my SM-N975U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on September 14, 2021, 08:01:42 PM
Rode up to the top of Mt Baker yesterday. The summit is only dry during August and September usually.

Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on September 14, 2021, 08:03:46 PM
Well, I put 95 miles on the CVO Road Glide, rode it to the DR, then Knoxville to pick up some stuff.  On the way home got a phone call, the Pan America I ordered showed up.  So I went home.  Got on the 13 CVO Road King and rode the 57 miles to the Dealer.  Traded the 13 King on the Pan America Special.  Then rode the Special home.

Congrats on your new bike Dave!! I'm sure you'll enjoy it.
Title: Re: What did you do to or on your CVO today?
Post by: SIKBIRD on September 14, 2021, 08:22:43 PM
Well, I put 95 miles on the CVO Road Glide, rode it to the DR, then Knoxville to pick up some stuff.  On the way home got a phone call, the Pan America I ordered showed up.  So I went home.  Got on the 13 CVO Road King and rode the 57 miles to the Dealer.  Traded the 13 King on the Pan America Special.  Then rode the Special home.

Waiting on a full report about the new bike: likes, dislikes, power, torque, suspension, etc.
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on September 14, 2021, 10:59:15 PM
Well, I put 95 miles on the CVO Road Glide, rode it to the DR, then Knoxville to pick up some stuff.  On the way home got a phone call, the Pan America I ordered showed up.  So I went home.  Got on the 13 CVO Road King and rode the 57 miles to the Dealer.  Traded the 13 King on the Pan America Special.  Then rode the Special home.
Thats awesome Dave, looking forward to reading your posts about it!
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on September 15, 2021, 07:03:57 AM
Waiting on a full report about the new bike: likes, dislikes, power, torque, suspension, etc.
Not a full report.  Rode her 187 miles yesterday.  Plenty of roll on power at 75 mph.  Bike has lots of HP and pulls very hard 4500 rpm and up.  Normal riding is at a higher RPM.  70 is around 4000 rpm.  Does not have the torque feel of a big twin at low rpm, but feels fine.

Suspension is light years ahead of a H-D Touring bike.  Much better ride, like it firm put it in Sport mode, like it more plush, put it in Road mode.  Modes also change throttle response and compression braking.  Modes also effect all the traction control settings.  I need to learn more as I can set up two custom on road modes.  Also has two dirt modes. 

Biggest dislike so far is Bars are two low for me, I need to get the 2" risers.  Bars feel fine if seat is in low position for me, but then legs do not

Title: Re: What did you do to or on your CVO today?
Post by: MC16LTD on September 21, 2021, 03:13:25 AM
Completed a 450 mile weekend ride to the Thunder Valley Rally in Cottonwood AZ.   Stopped in Wickenburg, Yarnell to visit the Granite Mountain Hotshots memorial, Prescott, the rally in Cottonwood (still in a Covid recovery phase I think due to small crowd), Montezuma Castle and then through the mountains near Strawberry/Pine and Payson.  From desert cactus to Ponderosa Pines, it was a great trip.
Title: Re: What did you do to or on your CVO today?
Post by: MC16LTD on September 21, 2021, 03:14:19 AM
Downtown Cottonwood.
Title: Re: What did you do to or on your CVO today?
Post by: TN on September 25, 2021, 08:33:45 AM
Took an early morning ride, 56* heading out, perfect conditions.  :orange:


Title: Re: What did you do to or on your CVO today?
Post by: KGB on September 25, 2021, 02:18:07 PM
Took an early morning ride, 56* heading out, perfect conditions.  :orange:

Did you get that leak fixed up?
Title: Re: What did you do to or on your CVO today?
Post by: TN on September 25, 2021, 06:03:13 PM
Did you get that leak fixed up?

Negative, she’s going for a short road trip up yonder way before the parts changer tears into her.  :drink:
Title: Re: What did you do to or on your CVO today?
Post by: KGB on September 25, 2021, 06:04:33 PM
Negative, she’s going for a short road trip up yonder way before the parts changer tears into her.  :drink:
Hopefully it's nothing drastic


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on September 25, 2021, 09:22:42 PM
Did you get that leak fixed up?

Oh yeah forgot to tell ya, Phil did try to pin the oil on his cardboard on me after you planted that seed in his brain. Thanks for that. LOL
Title: Re: What did you do to or on your CVO today?
Post by: KGB on September 25, 2021, 09:25:10 PM
Oh yeah forgot to tell ya, Phil did try to pin the oil on his cardboard on me after you planted that seed in his brain. Thanks for that. LOL
How could I do that, they all leak


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: TN on September 25, 2021, 09:38:41 PM
Oh yeah forgot to tell ya, Phil did try to pin the oil on his cardboard on me after you planted that seed in his brain. Thanks for that. LOL

Shrader that was your partner Dwayne that planted that seed, now back to my leak, it musta slowed her down some cause you kinda kept up Keith. Third time is the charm.
Come to think of it that happened the morning after a group came around messing with me, care to continue?  :drink:
Title: Re: What did you do to or on your CVO today?
Post by: TN on September 26, 2021, 06:31:46 AM
:trailer:        :trailer:       :trailer:

What did someone else do to your CVO today?
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on September 26, 2021, 07:08:47 AM
Yeah sorry Keith that was Dwayne, my bad.

I nor no one else did a thing to my CVO today Phil, but I did go see some elk.

I saw one take a leak too, but it was not nearly as surprising as the leak mentioned previously.
Title: Re: What did you do to or on your CVO today?
Post by: TN on September 27, 2021, 06:03:14 PM
Yeah sorry Keith that was Dwayne, my bad.

I nor no one else did a thing to my CVO today Phil, but I did go see some elk.

I saw one take a leak too, but it was not nearly as surprising as the leak mentioned previously.

The voice of reason   :huepfenlol2:
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on September 28, 2021, 05:36:34 AM
Going to ride her over to the Smokey Mountains HOG rally, and do the poker run this am.  On the road by 06:30 so we can start the run at 0830.
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on September 28, 2021, 05:19:17 PM
Road a little this evening and since Miss Susan had an appointment I was on my own for dinner. After logging a few miles, I decided to stop by a little place in my hometown of Bluewell, WV called Lynn’s Drive Inn. Sitting there under an umbrella waiting for my two dogs and fries I got to thinking about the significance of this place in my own history. This little Drive Inn was started in 1950 by Ruck Hale and is named after one of his sons. My mom was working here around that time when she was approached by a dashing young lad named Dink Shrader and the rest as they say is history. Married in November 1952, my older brother came along in 1957, then an older sister in 1960, me in 1964 and my younger sister in 1976, which is about the time I was patrolling Bluewell on a ten speed and eating hotdogs under the trees along the parking lot of Lynn’s.

The trees are gone now along with Mom and Dad, my brother Dink and sister Tammy. I’m still here missing them and reminiscing about days gone by.

Well I’ve got to hit the road again, must have got some dust in my eye or something that I gotta blow out

Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on September 29, 2021, 06:28:20 AM
Interesting little story there Shrader.

Put 218 miles on the CVO road glide for a poker run I did not win.  Then 109 miles on the Pan America.  Will be getting the 1000 mile service on the PAS today.  Hog Rally in the Smokys is good so far even though I didn't win the opening poker run.
Title: Re: What did you do to or on your CVO today?
Post by: 99 Blue flame on September 30, 2021, 08:36:03 AM
 Put 130 miles on the FXR3 day before yesterday. Changed out the brake fluid yesterday. Gonna put a few more miles on it today.
Title: Re: What did you do to or on your CVO today?
Post by: TN on October 01, 2021, 06:38:01 AM
On the operating table


Title: Re: What did you do to or on your CVO today?
Post by: BigLew on October 01, 2021, 10:55:56 AM
Phillip you doing the surgery??

BigLew  :orange:
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on October 01, 2021, 12:49:28 PM
Naw Mike

His bike ain't leaking, I put down oil on the cardboard under his bike. At least that's what was alluded too in the Valley.

I was almost hurt.....hurt that I didn't think about messing with him and putting something on his cardboard. Maybe a mix of oil , peanut butter and bloody mary?

Title: Re: What did you do to or on your CVO today?
Post by: TN on October 01, 2021, 05:08:26 PM
Phillip you doing the surgery??

BigLew  :orange:

Big Lew I do all the work on my bike, except headwork and tuning. It ain’t rocket science that some make it out to be. Now granted I’m just a parts changer but my OJT is making me more confident. I’m fairly up to speed on my 09 FLTRSE3, give me a call sometime and we’ll talk, I only give real world experience suggestions and not what I read on the internet. I was hoping to ride it to Birmingham next weekend but I’m not gonna sweat it. They got some road racing going on and I will be there one way or another.

RideON
Title: Re: What did you do to or on your CVO today?
Post by: TN on October 01, 2021, 05:10:32 PM
I’m starting from scratch with the gearset, setting the endplay on the main drive gear, Baker has changed that tolerance and so should I. Everything looks good right now and was at a good stopping point today.

Enjoy the weekend folks I know I will

Title: Re: What did you do to or on your CVO today?
Post by: TN on October 01, 2021, 08:35:15 PM
All that disassembly to get to the main drive gear. Replace a spacer to get endplay to spec, new bearings, new pulley spacer/oring, new main seal. 

Fingers crossed
Title: Re: What did you do to or on your CVO today?
Post by: TN on October 02, 2021, 06:33:33 AM
The install of my DD7 was 2 1/2 years ago and if you look at the main drive bore at 3 and 9 o’clock you’ll see three small marks where I pulled the main seal, my scoreboard. I really thought I had it solved the last time but here I am. That’s why I started from scratch, my notes said the endplay was .0015 on install which is well within the specs which is now .0005-.002 but something isn’t right. I used the white spacer(.102) on initial install, I now have a .100 spacer too.

I had to have the DD7 and I’m determined to make it work without leaks. Anyone got some ideas I'm all ears.

Title: Re: What did you do to or on your CVO today?
Post by: TN on October 02, 2021, 07:40:20 PM
Think I found the root cause of the the leak. On the original setup I used the thinest spacer in the kit which was the white (.102) seems like the specs were .001-.003 then. I have in my notes it was set at .0015. Decided to check the endplay with the white spacer still installed, I was getting .0035-.004. with the same equipment.

You can only check endplay with just the main drive gear in the hole. 

Title: Re: What did you do to or on your CVO today?
Post by: KGB on October 03, 2021, 12:35:07 AM
And you thought you were just a parts replacer...


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: TN on October 03, 2021, 10:06:28 AM
And you thought you were just a parts replacer...


Sent from my iPhone using Tapatalk

I'm learning, not use to such precision work, my method usually requires a BFH.  :nixweiss:



Got some help from a friend that does precision work all the time for final setup this morning. .001 with the .100 yellow spacer,  .003 is a sheet of paper.

I’m learning as I go
Title: Re: What did you do to or on your CVO today?
Post by: KGB on October 03, 2021, 10:56:39 AM
Parts replacers don't have dial indicators


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: TN on October 04, 2021, 06:07:39 PM
Had to take a look in the camchest, just a smidge of fuzz on the magnet bottom of camplate, guess I'll pull the pushrods and lifters out to inspect them. About 25k on the build, very seldom sees over 5k rpm's.
Title: Re: What did you do to or on your CVO today?
Post by: TN on October 07, 2021, 07:57:06 PM
Lifters look good.
Title: Re: What did you do to or on your CVO today?
Post by: TN on October 07, 2021, 07:59:04 PM
One of my specialty tools, seal driver.   :bananarock:

Title: Re: What did you do to or on your CVO today?
Post by: TN on October 07, 2021, 08:01:41 PM
gear set and drive pulley installed

First time I set the end play I used 75-140 gear oil on the bearings and race while performing that step. This time I used a light gun oil as advised. We'll see what happens but I get it.

Title: Re: What did you do to or on your CVO today?
Post by: TN on October 11, 2021, 02:51:32 PM
BaBam      :orange:


Can we ride now!





Title: Re: What did you do to or on your CVO today?
Post by: KGB on October 11, 2021, 06:03:39 PM
BaBam      :orange:


Can we ride now!
Now maybe I won't get oil all over my bike when we're riding


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on October 12, 2021, 09:28:40 AM
BaBam      :orange:


Can we ride now!
Looking good.  Glad she is fixed
Title: Re: What did you do to or on your CVO today?
Post by: TN on October 12, 2021, 08:26:15 PM
Need to put heat shields and lowers on, I feel a road trip coming up, days are getting shorter.  :orange:

Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on October 13, 2021, 06:49:25 AM
Well I am loading my bike this morning for the ride down to Daytona FL.  Cant leave till noon, so we will spend the night along the way and be there by noon Thursday.
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on October 13, 2021, 12:10:13 PM
Have fun Dave, wish I was going with you!
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on October 13, 2021, 12:50:09 PM
I ordered a replacement battery today. My original battery is getting a little weak after 4 years and almost 55,000 miles. I'm going to try the
Yuasa GYZ32HL Battery. They say it has 500 CCA's and it has really good reviews. Amazon has it on sale for $159 and it is supposedly in stock. So, as they say, we'll see!
Title: Re: What did you do to or on your CVO today?
Post by: JLR on October 13, 2021, 07:01:04 PM
I went on a HOG chapter lunch ride today.  156 miles round trip and a decent reuben sandwich. 
Title: Re: What did you do to or on your CVO today?
Post by: TN on October 14, 2021, 06:35:42 AM
I ordered a replacement battery today. My original battery is getting a little weak after 4 years and almost 55,000 miles. I'm going to try the
Yuasa GYZ32HL Battery. They say it has 500 CCA's and it has really good reviews. Amazon has it on sale for $159 and it is supposedly in stock. So, as they say, we'll see!

I've been using that battery for sometime now, expecting delivery of one today as a matter of fact. I did have to return one in july for a full refund and they just recently came back in stock, I get mine at batterymart, I think I paid 169 after a coupon code. I change mine out every three years just because.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on October 18, 2021, 07:23:04 AM
Rode home from Daytona Biketoberfest yesterday.  Great ride, 60 for a low and 69 for a high, sunny all the way.  Little over 1500 miles on the bike this trip, had a blast.  Sons of Speed was fun, but dang hot out.
Title: Re: What did you do to or on your CVO today?
Post by: GKroadking on October 19, 2021, 05:07:56 AM
I swapped the original handlebar for an FBI EZ (Fat Baggers 1¼ "Pointed Top Handlebar 10" Chrome).
Easy installation of the cables due to the EZ Install - no more need to fight internal wiring. The clutch cable was laid a bit strict, but I was able to move it a bit.
I'm absolutely thrilled with the new handlebars, it rides a lot better straight away.  8)
Title: Re: What did you do to or on your CVO today?
Post by: GKroadking on October 19, 2021, 05:09:46 AM
I swapped the original handlebar for an FBI EZ (Fat Baggers 1¼ "Pointed Top Handlebar 10" Chrome).
Easy installation of the cables due to the EZ Install - no more need to fight internal wiring. The clutch cable was laid a bit strict, but I was able to move it a bit.
I'm absolutely thrilled with the new handlebars, it rides a lot better straight away.  8)

some more pics follow...
Title: Re: What did you do to or on your CVO today?
Post by: GKroadking on October 19, 2021, 05:10:28 AM
some more pics follow...
Title: Re: What did you do to or on your CVO today?
Post by: GKroadking on October 19, 2021, 05:11:21 AM

Title: Re: What did you do to or on your CVO today?
Post by: GKroadking on October 19, 2021, 05:13:32 AM
some more pics follow...
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on October 24, 2021, 07:26:33 PM
Took a nice little 200 mile ride with good friends on a beautiful Indian Summer day. It got up to about 70 which is rare up here this time of year. We dined at a new to us spot in the little town of Riner, Va called Buffalo and More that serve buffalo meat raised on their own farm. It was probably the best Buffalo burger I've ever had.

Then circled back home across Route 52 with the trees in pretty much full on fall color.

If this ends up being our last ride of the season, it was an epic one to end this year on.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on November 02, 2021, 07:17:46 AM
Did and oil change, check the belt and other fasteners.  Then gave her a real good bath. 
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on November 07, 2021, 07:42:44 PM
The day started out at 24 degrees up here in the mountains but eventually warmed up to 55 or so.
Decided to pull Ol Betsy out of hibernation and give her a little outing before the snow starts flying.

These days the Road King gets most of the attention but the ol 2004 still runs and rides good, but it definitely feels different and has a more nostalgic feel to it.

On another note I will be getting my dads candy apple red 1982 FLH, with only 10988 actual miles, running this winter. I did a preliminary review of it last Friday and it will need new tires, new battery, new throttle cables and both front and rear brakes feel like mush. I also anticipate having to rebuild the carb. Other than a little dust it looks just like the day it rolled off the assembly line, it should be fun riding it around once I get it going, as you don't see many stock 40 year old bikes running around anymore.

My dad called her Big Red and I only remember riding it one time around 1987 I think. I was riding my first street Harley, a 1980 FXE that had been in a fire, that I built from an engine and transmission to look exactly like a 1982 indigo blue Wide Glide. I remember dad saying I couldn't handle that big bike, LOL. I said Pop, the main difference is the front wheel and 6 cubic inches. LOL
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on November 30, 2021, 12:35:50 PM
We haven't seen this much rain in Washington, they say since 2006, so between work and the weather I hadn't been out for almost a month.
Yesterday there was a pause between the rain clouds and my only dry option appeared to be to the south. I live about 35 miles up the I 5 corridor so for me that meant the Seattle area. So I jumped on Southbound Hwy 99 to avoid the freeway and headed down through the new Aurora Avenue tunnel bound for Alki Beach in West Seattle and one of my favorite fish and chip places called Spud. The bridge that connects West Seattle to I 5 and the rest of the world is closed for long term repairs so I had to follow the detour signs and find the long way around.
As I arrived at my destination the sun came out and made the whole experience worth while. Well that and some awesome fish and chips.
After I arrived back home I proceeded to dump and replace all 3 fluids since the odometer clicked 55,000 on my little jaunt.

So all in all it was a great day!

This pic is a view of the Seattle waterfront from Alki Beach.

 
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on December 01, 2021, 07:53:09 AM
Sounds like a nice ride, fish and chips sounds great.

Road the Road Glide Monday 118 miles and Tuesday road the Pan America 114 miles.  Cool but sunny.
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on December 01, 2021, 05:57:35 PM
Good for you Dave. Did you say that you are fully retired now?
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on December 02, 2021, 08:36:33 AM
Good for you Dave. Did you say that you are fully retired now?

Medically Retired, November 14, 2019 was last day I worked.  Went on Disability insurance in January 2020, then SSDI in June 2020.  Disability insurance lasts until I am 65, which is 6 years an 4 months.

Bad thing is, even though SS is going up, my income will not change as my insurance goes down the exact amount SSDI goes up.  If I choose to earn any money, my insurance goes down by what I earn.

So, yep I am retired.  Planned to work to 65, so maybe it's a good thing I was forced to retire.  I sure am enjoying it so far.
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on December 02, 2021, 12:24:58 PM
Well good for you Dave. Sounds like lots of hoops, especially dealing with your health concerns but you definitely seem to be making the most of it. I turned 65 a month ago and I'm planning on pulling the plug in a couple of months. My major health concern is with my eyes. I just can't see working anymore!  :bananarock:
Title: Re: What did you do to or on your CVO today?
Post by: TN on December 05, 2021, 12:47:54 PM
Too nice not to ride in Switzerland today  :orange:     :drink:


Title: Re: What did you do to or on your CVO today?
Post by: 08glide on December 05, 2021, 01:23:03 PM
edically Retired, November 14, 2019 was last day I worked.  Went on Disability insurance in January 2020, then SSDI in June 2020.  Disability insurance lasts until I am 65, which is 6 years an 4 months.

Bad thing is, even though SS is going up, my income will not change as my insurance goes down the exact amount SSDI goes up.  If I choose to earn any money, my insurance goes down by what I earn.

So, yep I am retired.  Planned to work to 65, so maybe it's a good thing I was forced to retire.  I sure am enjoying it so far.
 Dave, I used to tell everyone that when I turned 55 I wanted to do something besides trucking. " gonna do sumtin differunt" I ended up with work related injury, couple of surgeries & on SSDI (have been since 2011. injury was in 2009) so I understand. enjoy what you have & make the most of it.  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on December 06, 2021, 06:39:18 AM
Dave, I used to tell everyone that when I turned 55 I wanted to do something besides trucking. " gonna do sumtin differunt" I ended up with work related injury, couple of surgeries & on SSDI (have been since 2011. injury was in 2009) so I understand. enjoy what you have & make the most of it.  :2vrolijk_21:
I can see you completely understand.  Things do not always go as planned.  All you can do is make the best out of the situation.  And as you say enjoy what you have.

Title: Re: What did you do to or on your CVO today?
Post by: Aussie on December 06, 2021, 05:13:12 PM
Woke up to a sunny day had breakfast and went for an early morning ride to the Hume Dam, one of the largest Dams in the world built in 1936.
https://www.waternsw.com.au/supply/visit/hume-dam
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on December 23, 2021, 07:35:03 AM
Been riding the 19 CVO Road glide, rode 80 miles on Monday doing errands, was 44 degrees.  Rode 71 miles on Tuesday getting heart worm pills for the dog, 43 degrees.  Will ride the Pan America Home from the dealer today, 56 miles. 
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on December 23, 2021, 03:58:36 PM
Little chilly Dave.  Dontcha think?? 😝
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on December 23, 2021, 05:31:02 PM
One word guys.......GERBING!   :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on December 24, 2021, 06:41:04 AM
Little chilly Dave.  Dontcha think?? 😝

Rather nice and comfortable. 

One word guys.......GERBING!   :2vrolijk_21:

Yep, bought my outer pants, jacket liner and gloves in 2010.  Money very well spent.  Can ride comfortably down into the teens. 
Title: Re: What did you do to or on your CVO today?
Post by: TN on December 26, 2021, 08:30:18 PM
I was Santa Claus……. (In my best Ozzy voice)
Title: Re: What did you do to or on your CVO today?
Post by: TN on January 01, 2022, 08:35:27 AM
Took the first ride of 2022 this morning, wishing everyone a Happy new Year.  :beerchug:



:orange:
Title: Re: What did you do to or on your CVO today?
Post by: TN on January 14, 2022, 08:43:11 AM
Installed HD #57000063 wind deflectors for buffeting when wearing Shoei modular helmet, takes care of that, there was no buffeting when wearing half helmet. I got them from the china connection for $20.22 to my door.


Title: Re: What did you do to or on your CVO today?
Post by: BigLew on January 14, 2022, 02:37:07 PM
Hey Phillip where do the wind deflectors fit? Picture

BigLew
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on January 14, 2022, 06:34:27 PM
One end connects to a spot by the fuel tank.  The other attaches to the crash bar.   I like em on my 16..Stuart
Title: Re: What did you do to or on your CVO today?
Post by: CVODON on January 14, 2022, 08:31:41 PM
Those deflectors came with my 15 RG. I tried with and without and could tell NO difference at all. They have been in the cabinet for last 5 years or so. Tried at sustained 60 mph & 70 mph, same day both with and without for a couple miles each. To each his own, I see no benefit. Initially I used them all the time, during love bug season one time my wife said "no way those things do anything, they are the only thing on bike without a hundred dead love-bugs", the deflectors were spotless.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on January 15, 2022, 06:50:15 AM
Lets see, yesterday I took a short 120 mile ride on the CVO Road Glide.  I also installed a new primary cover to replace the 117 cover since its no longer a 117.  Took 7 months to get this after ordering.  Last few times I ordered it was 4 to 5 weeks.

Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on January 15, 2022, 06:51:58 AM
I also added a new Timer cover to reflect the actual engine size.

Title: Re: What did you do to or on your CVO today?
Post by: TN on January 15, 2022, 07:45:29 AM
Mike, Here is a picture of right deflector looking down, it pushes the air up more forward instead following the curvature of the tank. It helped for my buffeting situation, modular use to vibrate slightly when up to speed. If you had certain recall done the rectangular plastic piece needs to be removed where tank bolts up and put small nylon spacer to take up space (or 1/4” shorter bolt) so everything is secure. It will be evident when you see how everything goes together. May have to put into wind tunnel with and without to prove scientific hypothesis.  :drink:
Title: Re: What did you do to or on your CVO today?
Post by: HOGMIKE on January 15, 2022, 11:27:19 AM
I also added a new Timer cover to reflect the actual engine size.

LOL
I had to do the same to my 117 after I went big!
Title: Re: What did you do to or on your CVO today?
Post by: HOGMIKE on January 15, 2022, 06:36:14 PM
Another
Title: Re: What did you do to or on your CVO today?
Post by: LuvGun on January 19, 2022, 02:49:44 PM
Got some Rebuffini grips
Title: Re: What did you do to or on your CVO today?
Post by: McLarenCVO04 on January 28, 2022, 08:53:59 AM
Well took battery out lol. But I did buy this cam kit and a Power Vision!
Title: Re: What did you do to or on your CVO today?
Post by: TN on March 21, 2022, 07:30:00 AM
Installed USB charging port in king tourpak.
Title: Re: What did you do to or on your CVO today?
Post by: KGB on March 21, 2022, 08:31:39 AM
Installed USB charging port in king tourpak.

Nice work! can you run a 220 in my garage
Title: Re: What did you do to or on your CVO today?
Post by: CPD on March 21, 2022, 08:46:51 AM
Got some Rebuffini grips
Nice! Who’s levers are those? Thanks!
Title: Re: What did you do to or on your CVO today?
Post by: TN on April 03, 2022, 11:27:46 AM
Can’t get around the whole track on my bike, they have it blocked because people like me. How about a drone.  :bananarock:
Title: Re: What did you do to or on your CVO today?
Post by: Jock on April 03, 2022, 07:10:58 PM
Can’t get around the whole track on my bike, they have it blocked because people like me. How about a drone.  :bananarock:


Took the KLR around there years ago and almost hit a deer!

Be careful!

 :)

Title: Re: What did you do to or on your CVO today?
Post by: TN on April 03, 2022, 08:09:34 PM


Took the KLR around there years ago and almost hit a deer!

Be careful!

 :)

Roger that Jock, I frequently stop there just because it’s nice and quiet back there. Plus it’s a great place to fly a drone, may I challenge you to a drone race sir?

Check the link out for track history and Savannah race history too.




https://www.racingcircuits.info/north-america/usa/savannah.html
Title: Re: What did you do to or on your CVO today?
Post by: jamala00 on April 10, 2022, 02:39:14 PM
Got it out of the garage from winter storage finally. Mother nature winter and cold just doesn't want to let go this year. Cleaned and re-oiled the K&N filter. Tomorrow I'm taking it in to get the new GTS HU flashed to the Boom II so I have audio again. While I went for a ride today it was the first time I really had an opportunity to use the heated grips. Holy Cow those things get hot. I only had it on 3 and I had to turn it off, it was too hot. I turned it down, but that just didn't seem to help much. Those things made to provide heat through you gloves or something? Dang they get toasty.
Title: Re: What did you do to or on your CVO today?
Post by: Cvoaz on April 22, 2022, 02:31:27 AM
I bought a coffee cup holder for mine!  Making it my own! 
Title: Re: What did you do to or on your CVO today?
Post by: Cvoaz on April 22, 2022, 02:34:32 AM
Got it out of the garage from winter storage finally. Mother nature winter and cold just doesn't want to let go this year. Cleaned and re-oiled the K&N filter. Tomorrow I'm taking it in to get the new GTS HU flashed to the Boom II so I have audio again. While I went for a ride today it was the first time I really had an opportunity to use the heated grips. Holy Cow those things get hot. I only had it on 3 and I had to turn it off, it was too hot. I turned it down, but that just didn't seem to help much. Those things made to provide heat through you gloves or something? Dang they get toasty.

It must suck to live where you cant ride all year.  Feeling bad for ya.
Title: Re: What did you do to or on your CVO today?
Post by: CVOThunder on April 24, 2022, 05:57:30 PM
Remembered it would be my best reply. Traded it in for a 2020 Road Glide Limited during the 2020 Sturgis Rally and it's a mixed bag of regret vs happiness of enjoying the new bike. Had the 131 kit installed before signing on the bottom line and it's been a gas. Working in Kuwait now and got to wondering if someone here purchased the old girl from BHHD. Hadn't been able to log into this site for awhile, especially from Afghanistan and surprised I'm able to do so today. My ramblings for today, would be cool to make the Bend GTG but not sure. Almost 65 which is the bounce out age for expats working in Kuwait but we'll see what happens.
Title: Re: What did you do to or on your CVO today?
Post by: kevin_n on April 25, 2022, 07:36:27 PM
Got mine out of winter hibernation this past weekend and went for a 20 mile ride, just so it could be cold and crappy this week.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on April 26, 2022, 06:38:51 AM
I have been riding it the last three days.  Rode 334 miles Saturday on our Clubs annual Fallen Brother ride which I led.  Then Sunday I rode to church, then to lunch and then a nice 100 mile ride.  Rode again yesterday to the Oncologist then a nice 80 mile ride after.  Raining now, so I will have to move it so I can get my car out of Garage as bike parks in front of car in garage, parallel with the door
Title: Re: What did you do to or on your CVO today?
Post by: McLarenCVO04 on April 26, 2022, 07:33:04 AM
Dropped it off for cams, exhaust and tuning! Can't wait!
Title: Re: What did you do to or on your CVO today?
Post by: OBB on April 28, 2022, 08:38:17 AM
Dropped it off for cams, exhaust and tuning! Can't wait!
Where did you end up taking it? You're only an hour west of me.
Title: Re: What did you do to or on your CVO today?
Post by: pudgeyxj on April 28, 2022, 09:45:25 AM
Added mid frame deflectors. So far they seem to be keeping my inner thigh cooler. Still think I need to look into better cooling,  fan assisted cooler, Love Jugs? It's early in the season and I've had it bump off the engine management/cyl shut down thingy already. Getting out as much as I can. Here in BC, Canadia, the weather has been really, really hit and miss.

Cheers

Paul
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on April 29, 2022, 07:59:15 AM
I rode it a little bit, a nice 112 miles late yesterday.  Was very nice out.
Title: Re: What did you do to or on your CVO today?
Post by: Hondo2doc on April 30, 2022, 12:04:11 PM
Added mid frame deflectors. So far they seem to be keeping my inner thigh cooler. Still think I need to look into better cooling,  fan assisted cooler, Love Jugs? It's early in the season and I've had it bump off the engine management/cyl shut down thingy already. Getting out as much as I can. Here in BC, Canadia, the weather has been really, really hit and miss.

Cheers

Paul
Love Jugs is out of stock for almost everything. I too wanted the mighty might for my 2021 SESG but no luck. I'm currently in Panama City Beach Florida at the Thunder Beach rally. Cycle Solutions out of Ft. Myers sells them as well and they don't have any and haven't had any in months they told me.

Good luck

Sent from my SM-G991B using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: BostonboyDH on May 02, 2022, 01:24:53 AM

   SOLD IT !!! & HAVING A REAL BAD CASE OF SELLERS REMORSE
Title: Re: What did you do to or on your CVO today?
Post by: TN on May 02, 2022, 07:00:00 AM
   SOLD IT !!! & HAVING A REAL BAD CASE OF SELLERS REMORSE


A new one will make you feel better, I’m too buried in my FLTRSE3 to consider that option.  :drink:
Title: Re: What did you do to or on your CVO today?
Post by: HOGMIKE on May 02, 2022, 08:14:01 AM
   SOLD IT !!! & HAVING A REAL BAD CASE OF SELLERS REMORSE

I feel your pain!

I had BUYERS REMORSE when I bought my 2019 after all the mechanical issues.
Spent too much money on the bike to ever sell it, so, it’s my last Harley.

Oh well.
 :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: BostonboyDH on May 02, 2022, 09:30:58 PM
   
   Ya kinda get attached to something that you took 13 years & wads of $$$$$ to personalize, & my only faint regret was going nutz on the motor & 7 speed tranny, so it was hard to see it ride away but fortunately I sold it to a close friend that's ready to get off his 1985 stroked Evo, & due to some health issues I didn't feel confident maneuvering a 900 lb bike around so It was time to let Romeo go  :-X.  I did however buy something a little lighter a 2022 FXLR-ST getting all the paper work done now and expect to take delivery next week.

BostonBoy 
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on May 03, 2022, 06:57:09 AM
   
   Ya kinda get attached to something that you took 13 years & wads of $$$$$ to personalize, & my only faint regret was going nutz on the motor & 7 speed tranny, so it was hard to see it ride away but fortunately I sold it to a close friend that's ready to get off his 1985 stroked Evo, & due to some health issues I didn't feel confident maneuvering a 900 lb bike around so It was time to let Romeo go  :-X.  I did however buy something a little lighter a 2022 FXLR-ST getting all the paper work done now and expect to take delivery next week.

BostonBoy
Those seem to be a hot seller.  Been told by a few FXR guys that these new FXLR-ST Handle great.  I am sure you will enjoy the new bike, looks good.
Title: Re: What did you do to or on your CVO today?
Post by: TN on May 04, 2022, 07:54:12 PM
I like that nex fxr  :2vrolijk_21:




Took the 1” spacers off the floorboards, the extra lean angle will be used in the near future.  :orange:
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on May 04, 2022, 08:33:26 PM
I never really liked those spacers either. 😝
Title: Re: What did you do to or on your CVO today?
Post by: TN on May 05, 2022, 09:08:33 PM
I never really liked those spacers either. 😝


I like them but riding hard in the twisties the mounting arm will scrape first,  without them the rear of the floorboards do, or the kickstand.






New tires, rotors, brake pads all the way around.   :orange:

Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on May 06, 2022, 08:38:46 AM
Just got mine out and took her for a 110 mile ride to have a cigar with a friend
Title: Re: What did you do to or on your CVO today?
Post by: Boatman on May 06, 2022, 05:24:07 PM
Quote from: TN link=topic=89705.msg1535214#msg1535214 date=1651799313






New tires, rotors, brake pads all the way around.   :orange:
[/quote

You getting her ready to ride to the Ohio get together I see.   :cherry: :cherry:
Title: Re: What did you do to or on your CVO today?
Post by: TN on May 07, 2022, 06:40:36 AM
[quote author=TN link=topic=89705.msg1535214#msg1535214 date=1651799313






New tires, rotors, brake pads all the way around.   :orange:


You getting her ready to ride to the Ohio get together I see.   :cherry: :cherry:

Or am I?   :orange:
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on May 07, 2022, 09:38:21 PM
Had some work done on the 16. Had the front forks serviced, steering neck bearings greased and adjusted and new wheel bearings installed. Night and day difference with those. I still really enjoy this bike. 😁. Stuart..
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on May 07, 2022, 10:58:16 PM
The 22 year old Road Glide (yes, CVOs existed at the beginning of the century) killed a high ratio of bugs per mile over an approximately 3 hour cruise (cue Gilligan's Island them music now).

The 23 year old FXR2 (yes, CVOs existed in the prior century [barely]) killed an equally high ratio of bugs per mile over not really any time at all (proper citation to The Beatles).

Time is on My Side (Rolling Stones) while riding and I'm having the Time of My Life (David Cook) though often it might seem I've Too Much Time on my Hands (Styx) but I'm having  Big Time (Peter Gabriel).  The bugs are a result of the Time of the Season (Zombies) and, though messy, are not a Bad Time (Grand Funk Railroad) so I'll take the Road King tomorrow and go Baby One More Time (Britney Spears).
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on May 09, 2022, 01:32:37 PM
LOL^^^^

Finished my 60K service last week although our weather is STILL not cooperating here in the great northwet.

I did however trailer down to the Avi Resort in Laughlin Nv. a couple of weeks ago. We rode around the area to check out the usual areas like Oatman, Kingman, Lk Havasu, Lk Meed, Needles and so on. We even took a day ride to the Palm Springs area. My 1st time there. On the way home we spent a couple nights in Pahrump Nv. which is a gateway to Death Valley Ca. and the state park there. That was my 1st time there and, as anyone who has been there knows, is absolutely gorgeous, especially the Artist's Pallette.
The temperatures were in the 80's and 90's the whole time and while we weren't complaining a bit, my bike sure was. My 128" build was tuned for our normal 50 plus degree weather at sea level so it was not a happy camper in the desert. When I returned home I got ahold of my tuner and he addressed the issue, so I should be good to go now.
Soo, back here to the unusually cold and wet weather for this time of year I sit.

C'mon sunshine!

Title: Re: What did you do to or on your CVO today?
Post by: Mofo67 on May 09, 2022, 06:30:26 PM
LOL^^^^

Finished my 60K service last week although our weather is STILL not cooperating here in the great northwet.

I did however trailer down to the Avi Resort in Laughlin Nv. a couple of weeks ago. We rode around the area to check out the usual areas like Oatman, Kingman, Lk Havasu, Lk Meed, Needles and so on. We even took a day ride to the Palm Springs area. My 1st time there. On the way home we spent a couple nights in Pahrump Nv. which is a gateway to Death Valley Ca. and the state park there. That was my 1st time there and, as anyone who has been there knows, is absolutely gorgeous, especially the Artist's Pallette.
The temperatures were in the 80's and 90's the whole time and while we weren't complaining a bit, my bike sure was. My 128" build was tuned for our normal 50 plus degree weather at sea level so it was not a happy camper in the desert. When I returned home I got ahold of my tuner and he addressed the issue, so I should be good to go now.
Soo, back here to the unusually cold and wet weather for this time of year I sit.

C'mon sunshine!

60k service you are putting on some good miles. Curious which brand 128 kit are you running? I had a FM 128 in my ‘20 RGL but haven’t decided on what direction I want to go with the ‘22 CVO RG.
Also are you still running the lower fairings on yours? Any issues through the years? I have everything updated and my lowers should be in this week, very excited about getting them installed.
Thanks
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on May 10, 2022, 03:32:52 PM
I am running FM 128 kit along with Zippers 468 cam with S&S cam plate and oil pump. I'm also running Harleys 64mm throttle body and intake along with the CNC heads from a Stage IV 117 kit. Yes, I'm still running lowers and have added Boom II speakers and amp to them. Everything is working as flawlessly as possible.

Title: Re: What did you do to or on your CVO today?
Post by: TN on May 11, 2022, 06:16:55 AM
Just passing thru.   :orange:


Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on May 11, 2022, 07:46:16 AM
Nice place to be riding!
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on May 12, 2022, 01:02:04 PM
Given the rare good weather here in Southern WV, Miss Susan and I took the opportunity to ride to a new restaurant over in Bastian Va. The place is called Downshift Diner and it’s decorated up Ike an old diner from the 50-60s. Food was actually really good. We then took a back way around back to Bluefield to extend the ride a bit. All in all a lovely dinner with my baby.
Title: Re: What did you do to or on your CVO today?
Post by: 08glide on May 12, 2022, 08:05:20 PM
just did a 800+ mi trip with a friend up into WV (Neola) to barnwood builders boneyard) then onto seneca rocks & into Elkins,WV. spent the night & rode up hwy92 &into Pa to Flight 93 memorial & then onto OhioPyle & into Carmichaels,Pa to father-in-law (wife was already there & father turned 93 today & still sharp as a tack). today we rode back inot Morgantown,WV & down 119,250 & 33 into harrisonburg,Va &back to the houjse. good trip. Now to clean the bugs Again !
Title: Re: What did you do to or on your CVO today?
Post by: HOGMIKE on May 15, 2022, 06:22:48 AM
After 55,000 on my 2019 limited I noticed one shock seal starting to leak.

Put the shocks from the green bike on temporarily until they service the old ones.

Those shocks have been rebuilt 4 or 5 times over the years, but fit me like a good pair of shoes.

Custom built by Sandy (RIP) at Works in 2009 and best ride I’ve ever had on the baggers.
Shout out to Tim at Workz the last time he took care of me in February 2019,I’ll bring them up tomorrow.

Good people to deal with. 👍
Title: Re: What did you do to or on your CVO today?
Post by: TN on May 23, 2022, 07:53:36 AM
Rode  :orange:
Title: Re: What did you do to or on your CVO today?
Post by: Mofo67 on May 23, 2022, 02:08:14 PM
Great weekend here in the east, but HOT 90+. Rode to Danville VA on Saturday to meet some guys that were buying a bike at the local HD dealer. While there I had them do my 1k service, activate the oil cooler fan and look over the work I did installing the lowers. They said the installation was good and bike had no issues.
Sunday rode out for breakfast and then filled the bike up and took the long way home. All in about a 375 mile weekend.
Next up, wash the bike and get ready for the next ride.
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on May 23, 2022, 09:29:04 PM
Great weekend here in the east, but HOT 90+. Rode to Danville VA on Saturday to meet some guys that were buying a bike at the local HD dealer. While there I had them do my 1k service, activate the oil cooler fan and look over the work I did installing the lowers. They said the installation was good and bike had no issues.
Sunday rode out for breakfast and then filled the bike up and took the long way home. All in about a 375 mile weekend.
Next up, wash the bike and get ready for the next ride.

 :worthless:
Title: Re: What did you do to or on your CVO today?
Post by: JoeVibe on May 29, 2022, 09:24:09 AM
Brought home my new ride yesterday. I'm a happy man!
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on May 29, 2022, 12:56:55 PM
Congratulations Joe, what a nice addition to your gorgeous collection. What a perfect shop too!! WOW
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on May 29, 2022, 11:08:46 PM
That is a fine looking machine Joe, I was wondering when you were gonna post it on here?

I know you had the 131 done. What else other that the fat tire, which I know is coming, have you done?
Title: Re: What did you do to or on your CVO today?
Post by: Phaedrus on May 30, 2022, 07:19:00 AM
I2021 CVO Road Glide - I added Sirius Travel Services, including Weather, Traffic and Fuel Prices, to the Nav system.
Title: Re: What did you do to or on your CVO today?
Post by: BigLock on May 30, 2022, 08:34:15 AM
A little late but Saturday my son in law and I rode up to Priddys general store in Danbury NC this store was built around 1888 and still run by the same family. We then rode up next to the VA state line  and then back down into Mt Airy NC aka Mayberry USA. From there with rode into Dobson NC to Rockford general store for a bit to eat and a cheerwine and a rest on the front porch. Then headed back home all in all about 450 miles.
Title: Re: What did you do to or on your CVO today?
Post by: JoeVibe on May 30, 2022, 10:53:12 AM
Congratulations Joe, what a nice addition to your gorgeous collection. What a perfect shop too!! WOW

Thanks! I really love this new bike!

That is a fine looking machine Joe, I was wondering when you were gonna post it on here?

I know you had the 131 done. What else other that the fat tire, which I know is coming, have you done?

I added Harley's ventilator extreme air cleaner. It's supposed to move about 40% more air. Also put on Fullsac's header and 2" baffles. Other than that, it's the "stock" 131 stuff. I bought a Star Racing "3/4 race" cam but I'm going to wait a while to add that so I can enjoy having a warranty for a while. Oh yeah, I did add Star's billet compensator ramp. I've been reading that that's a weak point so I wanted to be proactive. When I pull the gearbox to add reverse, I'm going to upgrade the clutch basket too.

I've also been moving small parts (handlebars, windshield, seat, cup holder, flag, and rear Legends, off the 16 to the new bike. I'm definitely going to sell the 16 but I have to wait until I get my fat fender from paint because I need the forks for the fat tire.

Pretty sure that's it so far.
Title: Re: What did you do to or on your CVO today?
Post by: HOGMIKE on May 30, 2022, 11:39:51 AM
Just returned from a nice  800 mile, 4 day trip up the central coast of CA with a friend.
Nice weather MOST of the time, but really thick fog on the way back!
 8)
Title: Re: What did you do to or on your CVO today?
Post by: HOGMIKE on May 30, 2022, 11:41:20 AM
One more
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on May 31, 2022, 07:50:40 AM
Beautiful new bike Joe. 
Title: Re: What did you do to or on your CVO today?
Post by: acevtwin on May 31, 2022, 09:02:02 AM
Goy my new bike just about where I want it now.
Bad Boyz seat, Klockwerks windshield and Rinehart Slip ons.
Also added the fairing vent closures.
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on May 31, 2022, 11:52:44 AM
This seems to be the bike of choice this year....

I would like to see one of them green flame street glides up close
Title: Re: What did you do to or on your CVO today?
Post by: OBB on May 31, 2022, 04:38:48 PM
Goy my new bike just about where I want it now.
Bad Boyz seat, Klockwerks windshield and Rinehart Slip ons.
Also added the fairing vent closures.
I'm liking it,,, a lot! After having both an RGU and an RG, I find the RGU sitting more and more. That would be the best of both worlds there. I love the look of the chopped pack. Nice layout.
Title: Re: What did you do to or on your CVO today?
Post by: acevtwin on June 01, 2022, 01:35:41 PM
I'm liking it,,, a lot! After having both an RGU and an RG, I find the RGU sitting more and more. That would be the best of both worlds there. I love the look of the chopped pack. Nice layout.

Thanks, I actually prefer the look without the chopped Tour Pak, but it does come in handy.
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on June 02, 2022, 11:05:07 PM
I just did a bunch of 60,000 mile maintenance and found a major drivability issue;

 I had all 3 of the hydraulic fluids flushed (for the 2nd time) and changed along with the fork tubes including of coarse the seals. While my guy was doing a minor inspection he found a nail in my front tire (which still had about 5 or 6K miles of tread left) AND one of my rear break pads was about 30 seconds from exposing its backing plate. Both were replaced.

 During my trip to Nev., Az., and Ca. last month I was experiencing some major engine pinging from about 2700 to 3200 RPM. ASSuming it was mainly the temperature and maybe some crappy gas here and there, I contacted my tuner shortly after returning home to see if some adjustments could be made. I went in today to see what could be done. Nels listened patiently as I explained what I was experiencing and then went to work. After trying to correct my tune for aWhile he came out of the booth said that no matter what he did he could not adjust it out. Then he explained that it seemed to be a fuel delivery issue. He suggested a fuel filter and if that didn't fix the problem maybe a fresh set of injectors.
 So after all was said and done (this was an all day ordeal because of other customers that had appointments) my 60,000 mile original fuel filter WAS the culprit! I feel like such an idiot. I know better, or at least I do now.
 So...I should be all good to go...for now.
Title: Re: What did you do to or on your CVO today?
Post by: Joel on June 03, 2022, 09:21:55 AM
I had a similar condition on a 03 RKC, some pinging,  embarrasing  backfiring on deceleration and a very lean smell most noticeable in the garage when shutting down.
Bike was under 25,000 miles,  dealer and the indi both said they never need a fuel filter replacement.
So I ordered a new fuel filter and after replacing it all those symptoms went away.
Now you got me thinking that I should be changing the filter on my current 20I5 Limited as regular maintenance.
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on June 03, 2022, 11:46:58 AM
A fuel filter will now be on my 30K check list especially with the crap quality of gas these days.
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on June 03, 2022, 01:01:20 PM
didnt do to much to the bike.... but i got a new knee installed on the right hand side, so will a couple of weeks before i can ride  :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: Joel on June 03, 2022, 03:29:07 PM
New knees , my customers that have had that done have been happy with the outcome.
Wishing you a speedy recovery.
Title: Re: What did you do to or on your CVO today?
Post by: HOGMIKE on June 03, 2022, 03:43:56 PM
didnt do to much to the bike.... but i got a new knee installed on the right hand side, so will a couple of weeks before i can ride  :nixweiss:

Took Big Pete out today to put some break in miles on his new Streetglide Special.

He bought the bike, put 100 miles on it, got a left knee replaced 3 weeks ago and wanted to see if he could ride today!

Knee working good, and bike running fine.
 :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: TN on June 05, 2022, 03:09:25 PM
Got a FOBO TPMS for my antiquated ride.
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on June 05, 2022, 08:13:40 PM
Recently installed a new headlight in the Road King. Dwayne turned me onto a light called Eagle Lights that he saw on a bike that rode into the campground after dark in Myrtle Beach. He was talking to the dude cause the light was so bright and yada yada yada he ordered one.
After talking to him after his initial test I ordered one.

Friday night Susan and I rode til after dark to test the light and all I can say is WOW. They say that their gen3 light is 2100 lumens on dim versus 550 for the HD Daymaker. I have no doubt that their numbers are correct. The light pattern is also spread way out to the sides compared to the Daymaker.

Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on June 06, 2022, 08:11:52 AM
I just rode mine for 3 days on the Blue Ridge Parkway and some other great roads around Little Switzerland.  Beautiful area.
Title: Re: What did you do to or on your CVO today?
Post by: Priz on June 06, 2022, 10:21:10 AM
It looks like there are many options for the Eagle Lights. Which one made you so happy? I could use  something better on my 08 RK and the kids want to know what I want for my Birthday.
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on June 06, 2022, 12:44:45 PM
It looks like there are many options for the Eagle Lights. Which one made you so happy? I could use  something better on my 08 RK and the kids want to know what I want for my Birthday.

Gen III with Halo, not that the halo part matters, is what I got and I pretty sure that is what Dwayne got for his 2015 Ultra as well.

The guy Dwayne originally talked to had a Gen I and it was noticeably brighter than Daymaker. Gen III is just the latest and greatest i reckon.
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on June 06, 2022, 02:41:19 PM
Oooooh, they make a red one. ???
Title: Re: What did you do to or on your CVO today?
Post by: Priz on June 06, 2022, 02:59:49 PM
And Blue one too!!! Thank you Shrader!
Title: Re: What did you do to or on your CVO today?
Post by: SIKBIRD on June 07, 2022, 11:26:09 PM
Rode it to Pigeon Forge, TN, (well yesterday actually) rode the Rattler today and it was a great ride once I dried out from the torrential rainfall all the way from Gatlinburg to Maggie Valley.  I honestly think I’d have been drier and warmer if I’d have jumped into a swimming pool!
Title: Re: What did you do to or on your CVO today?
Post by: kevin_n on June 11, 2022, 04:18:16 PM
Washed it, clay bared it, and put on some Wolfgang sio2 paint sealant. Also did the same to Kathy’s bike. Now they are as smooth as a new piece of glass.
Title: Re: What did you do to or on your CVO today?
Post by: d3v1ld0g on June 11, 2022, 09:45:29 PM
Added nostalgic saddlebag guards. I’ve always liked the look.
Title: Re: What did you do to or on your CVO today?
Post by: Hondo2doc on June 12, 2022, 07:35:45 AM
Well yesterday rode about 200 miles. Took a nice ride to Everglades City to have breakfast at a little mom and pop place called Island Cafe. Food was good I've been there before. The ride was great. We have had a ton of rain here recently in south Florida so canal and lake water levels are way up. It's very cool riding the Tamiami Trail and seeing all the gators swimming along in the canal next to the rode.

Coming home I rode through 2 hard showers (it's summer in Florida rains every day) that lasted about 5 minutes each. Yeah I got soaked both times but it's so hot here by the time I got home I was totally dry.

Riding to Naples with some buds today for lunch.

Sent from my SM-T500 using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: TN on June 12, 2022, 10:16:43 AM
Added nostalgic saddlebag guards. I’ve always liked the look.

 :2vrolijk_21:


Took an early morning ride, it’s getting a lil warm to ride for pleasure by midday here.

 
Title: Re: What did you do to or on your CVO today?
Post by: osis on June 12, 2022, 11:20:01 AM
Added nostalgic saddlebag guards. I’ve always liked the look.

Looks nice, that is what I want for my 2022 CVO.
Where did you bay ?

Title: Re: What did you do to or on your CVO today?
Post by: d3v1ld0g on June 13, 2022, 09:49:00 AM
Looks nice, that is what I want for my 2022 CVO.
Where did you bay ?

I found them on Facebook marketplace. Gently used. Got them for $50. Cavalry customs has them for $140 for my year.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on June 19, 2022, 08:28:25 AM
Yesterday was nicest day in over a week, humidity and heat way down.  Did a nice 200 mile ride with my club, over to Fall Creek Falls State Park for lunch.
Title: Re: What did you do to or on your CVO today?
Post by: TN on June 19, 2022, 08:47:28 AM
Yesterday was nicest day in over a week, humidity and heat way down.  Did a nice 200 mile ride with my club, over to Fall Creek Falls State Park for lunch.

You ride the Pan-AM ?


Took an early morning ride and was pleased to see $4.89 a gallon hi-test gas, by the interstate too. Only took $27.24 to fill up. A cool wave has hit southern SC too :drink:


Title: Re: What did you do to or on your CVO today?
Post by: OBB on June 19, 2022, 11:11:50 AM
Flipped the front end of my shift linkage to the inside to get it more straight and so it doesn't seem to bind. A guy on the Shark forum had issues when He went to an aftermarket linkage until He changed His around. A couple minutes work to see if it makes a difference on the clunky shifting. (https://uploads.tapatalk-cdn.com/20220619/73172a6c7af862f81ab498aed660eb20.jpg)(https://uploads.tapatalk-cdn.com/20220619/d18c355fbc5825643049a6ae7f7e23e5.jpg)(https://uploads.tapatalk-cdn.com/20220619/e88924d216b702aa682d8de898a274f1.jpg)

Sent from my SM-N981U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on June 19, 2022, 01:15:33 PM
Flipped the front end of my shift linkage to the inside to get it more straight and so it doesn't seem to bind. A guy on the Shark forum had issues when He went to an aftermarket linkage until He changed His around. A couple minutes work to see if it makes a difference on the clunky shifting. (https://uploads.tapatalk-cdn.com/20220619/73172a6c7af862f81ab498aed660eb20.jpg)(https://uploads.tapatalk-cdn.com/20220619/d18c355fbc5825643049a6ae7f7e23e5.jpg)(https://uploads.tapatalk-cdn.com/20220619/e88924d216b702aa682d8de898a274f1.jpg)

Sent from my SM-N981U using Tapatalk
i made that mistake before.... will hit cylinder and you wont be able to get past 4th gear ... your results may vary
Title: Re: What did you do to or on your CVO today?
Post by: OBB on June 19, 2022, 01:35:51 PM
i made that mistake before.... will hit cylinder and you wont be able to get past 4th gear ... your results may vary
I've checked it sitting on the stand. It goes through all 6 without hitting.

Sent from my SM-N981U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: JoeVibe on June 20, 2022, 09:53:21 AM
I've checked it sitting on the stand. It goes through all 6 without hitting.

Sent from my SM-N981U using Tapatalk



When I put the SE linkage on the new bike I noticed the bind so moved the front joint to the inside, like you did. I rode about 150 miles yesterday with absolutely no issues.
Title: Re: What did you do to or on your CVO today?
Post by: acevtwin on June 20, 2022, 11:26:03 AM
I installed large Diameter Saddle Bag Guards from Bad Boyz Cyclez.
Same diameter as the Chopped engine Guard. Looks good.

Title: Re: What did you do to or on your CVO today?
Post by: BigLew on June 20, 2022, 03:07:57 PM
looks great

BigLew
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on June 20, 2022, 07:24:48 PM
Killed several bugs with two of them.  One was late breakfast bugs.  The other was early dinner bugs.  Dead bugs is good bugs.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on June 21, 2022, 08:01:03 AM
You ride the Pan-AM ?


Took an early morning ride and was pleased to see $4.89 a gallon hi-test gas, by the interstate too. Only took $27.24 to fill up. A cool wave has hit southern SC too :drink:
Now.  I road the CVO Road Glide.  She did great as usual.
Title: Re: What did you do to or on your CVO today?
Post by: TN on June 21, 2022, 04:20:56 PM
Now.  I road the CVO Road Glide.  She did great as usual.


Roger that, I been looking for some reviews about the rev-max, drivetrain mainly and don’t see a whole lot on the forums I visit, just curious. I know you ride regular so I thought I’d bring it up.

To keep to the thread topic I finished off my service on the CVO, 4qts 12ozs of 10w-60 engine, 1qt HD formula+ primary, !qt 75-140 mobil 1 trans.
Title: Re: What did you do to or on your CVO today?
Post by: EZRIDN on June 22, 2022, 05:50:06 PM

I dropped $409 to replace the front tire....nothing special, just OEM Dunlop.   My previous E3 cracked around the sidewall...though plenty of tread left.   Watch those date codes when buying tires....lesson learned that you cannot trust independent shops no more than MOCO stores.
Title: Re: What did you do to or on your CVO today?
Post by: PFWiz on June 24, 2022, 11:24:16 AM
I turned (or had turned) my 2018 CVO Limited into a trike. As Harley seems unwilling to put an independent rear suspension in the Tri Glide I really had no choice. I also now have a 3 gal aux fuel tank so I can go at least long as the bikes can between fill ups. The kit is a Roadsmith R body.

Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on June 24, 2022, 11:47:47 AM
How much weight is added and what differences (if any) in final drive ratio?  Just wondering if power/weight changes enough that it begins to feel a little sluggish or how much the response is noticeably different?
Title: Re: What did you do to or on your CVO today?
Post by: PFWiz on June 24, 2022, 06:19:54 PM
I think it added 3 or 4 hundred lbs. I made no change to the final drive ratio. It is a little slower accelerating, but has no problems cruising along at 80. If I decide I need it I will put a cam in this winter.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on June 25, 2022, 12:11:17 PM
Good looking Trike you have, nice job.
Title: Re: What did you do to or on your CVO today?
Post by: TN on June 26, 2022, 08:01:36 AM
Was riding at the crack of dawn, sub 70* morning  :orange:

Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on June 26, 2022, 06:28:29 PM
A small group of us including wmustang, Miss P, Steve M, Steve H and Tally Ho rode across the Back of the Dragon, first hill anyway, through Saltville to Damascus to eat at the Diner there. Then on out to Shady Valley and picked up the Snake up towards Abingdon, Va. The main reason for going to Abingdon was because the William King Museum there has an exhibit called The Open Road, which is a small collection of motorcycles ranging from a 1926 Harley Single up to a 1972 Sportster. The exhibit was a bit of letdown because I expected more quite honestly.

However what I didn't know is that they also had an exhibit of old flintlock long guns, and by that I mean the type Davy Crockett and Daniel Boone carried around back in the day. There were several cases spread throughout two rooms with each case having 8 or more of these old guns.

As a gun enthusiast, although not of this particular era, it was awesome to see these weapons and to think about the history they represent. They were all so beautiful and to see the natural color and patterns within what one has to assume came from the old growth wood that existed here in the mountains prior to the industrial revolution was truly awesome.

Orange Crush ran great as usual, the only problem is that I feel I have this bike so well sorted with regard to the motor, suspension, etc that it's getting kinda hard to find something to upgrade these days.
Title: Re: What did you do to or on your CVO today?
Post by: djpvetter on June 27, 2022, 03:15:02 PM
Sorry to interrupt this thread, but can anyone tell me how to post a new topic on this forum? When I go to help, it says to look for the "New Topic" button at the top and bottom of the page. I see nothing of the sort. Any help would be appreciated! Thank you.
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on June 27, 2022, 03:38:19 PM
You cannot post a new topic from within a already existing thread. For clarification one can only post new topics within a sub group of the forum.

For instance this thread is within the General CVO Discussion sub group of the forum. It’s the most recent thread within this sub group.

If you back out one level to the General CVO Discussion you should see lined up above “views” a box labeled New Topic. Once you find and click that box you can start a new thread within the General CVO Discussion sub group. This feature works the same on all sub groups within the forum.

Title: Re: What did you do to or on your CVO today?
Post by: TN on June 29, 2022, 01:27:47 PM
Screamin for adventure after some TLC


Title: Re: What did you do to or on your CVO today?
Post by: TN on June 29, 2022, 08:12:51 PM
Part of my TLC I mentioned earlier

Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on June 30, 2022, 07:27:36 AM
Looks good.  The 09 sliver is one of my favorite CVO bike, and was my first CVO.
Title: Re: What did you do to or on your CVO today?
Post by: Phreakyz on June 30, 2022, 08:13:28 AM
I finally had to replace one of the saddlebag speakers on my '19.  Fortunately the speaker was not super expensive and it was simple to install.   Sounds great again now.    I ordered a spare from Surdyke to have when the other one fails.   127 Bucks and 11 bucks shipping...
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on June 30, 2022, 02:39:31 PM
Part of my TLC I mentioned earlier

Is that a new set of Legend's Revo A's that I see? I love mine!
Title: Re: What did you do to or on your CVO today?
Post by: OBB on June 30, 2022, 03:23:36 PM
Bled the rear brakes on the 15 using a tablet and dongle setup I got from a guy that bought it and never used it. Kinda nice to be able to flush that abs unit.

Sent from my SM-N981U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on July 01, 2022, 05:59:14 AM
I finally had to replace one of the saddlebag speakers on my '19.  Fortunately the speaker was not super expensive and it was simple to install.   Sounds great again now.    I ordered a spare from Surdyke to have when the other one fails.   127 Bucks and 11 bucks shipping...
Good to know.  I believe one of mine is blown again, and now out of warranty. 
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on July 01, 2022, 06:02:48 AM
Yesterday I gave the 2019 CVO RG a very good bath.  Then I packed my bags, and loaded the bike in preparation for a 10/11 day trip.  My wife and I are leaving this morning for Rapid City, SD.  Motor Maids International convention is there starting Monday.  Looking forward to riding that area again. 
Title: Re: What did you do to or on your CVO today?
Post by: Mofo67 on July 01, 2022, 06:57:11 AM
After 4 months of waiting I received the matching passenger pegs frames for my ‘22 CVO RG. You can’t order the complete Scorched Chrome pegs, you have to order the parts.
I was already using the Kahuna collection so I just swapped the frames. Now I have matching highway pegs.

Title: Re: What did you do to or on your CVO today?
Post by: Phreakyz on July 01, 2022, 07:29:33 AM
Bled the rear brakes on the 15 using a tablet and dongle setup I got from a guy that bought it and never used it. Kinda nice to be able to flush that abs unit.

Would love to know more about the software and dongle that you used?   Bleeding the ABS on my '19 is on my to do list as well as the clutch fluid.
Title: Re: What did you do to or on your CVO today?
Post by: TN on July 01, 2022, 01:45:22 PM
Is that a new set of Legend's Revo A's that I see? I love mine!


Yup, good so far  :2vrolijk_21:




Everyone have a great, safe weekend, whatever you do.  :bananarock:

 



Title: Re: What did you do to or on your CVO today?
Post by: OBB on July 01, 2022, 04:57:16 PM
Would love to know more about the software and dongle that you used?   Bleeding the ABS on my '19 is on my to do list as well as the clutch fluid.
I'll have to dig up the info. It cycles the abs pump. You can do your brakes with it but not the clutch.

Sent from my SM-N981U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on July 01, 2022, 08:12:54 PM
So you retired the Bitubos.

Have you ridden the new ones enough to say which you prefer yet?
Title: Re: What did you do to or on your CVO today?
Post by: P_uffe on July 04, 2022, 06:19:47 PM
Took a nice ride to a friend's shop. Coffee and donuts while we fitted some mirrors and tried to figure out how to mount the larger Spanish license plate on there in order to register the bike.
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on July 04, 2022, 10:53:36 PM
Replaced the lock switch on the fairing on the 16 cvorg ultra. Then cleaned it all up. Getting ready to ship it north for our annual new england ride at the end of July. Can't wait. 👍. Stuart.
Title: Re: What did you do to or on your CVO today?
Post by: Mofo67 on July 05, 2022, 08:34:48 AM
Nothing new, just an enjoyable 275 mile ride yesterday.. Weather was fantastic!
Title: Re: What did you do to or on your CVO today?
Post by: TN on July 11, 2022, 06:43:24 AM
Just 1500mi on tire when I found this, what would you do?



Title: Re: What did you do to or on your CVO today?
Post by: HOGMIKE on July 11, 2022, 08:56:35 AM
Just 1500mi on tire when I found this, what would you do?


What is your tread depth?

Plug it, then ride on!

JMHO
 8)
Title: Re: What did you do to or on your CVO today?
Post by: SIKBIRD on July 11, 2022, 10:21:40 AM
Just 1500mi on tire when I found this, what would you do?

Same thing happened to me with about the same mileage.  I started to plug it but then started thinking about I’ve thrown plenty of mods at the bike that cost way more than a tire, with no hesitation, why am I taking a risk with this?  IMHO your safety and peace of mind are worth more than $300.  I took it off and gave it to a buddy with laced wheels so he could use it with an inner tube.
Title: Re: What did you do to or on your CVO today?
Post by: D-N-D on July 11, 2022, 10:43:54 AM
Plug it !!! It will be fine it's not a sidewall you won't have any problems.
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on July 11, 2022, 10:02:21 PM
Just 1500mi on tire when I found this, what would you do?

Had a similar situation a few years back and ended up running the tire with no issues down past the wear bars.

https://www.amazon.com/Tru-Flate-15-296-Plug-N-Patch-Rubber-Integral/dp/B000CIUOVA/ref=asc_df_B000CIUOVA/?tag=hyprod-20&linkCode=df0&hvadid=241983951578&hvpos=&hvnetw=g&hvrand=5166304391748709634&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9033389&hvtargid=pla-525288984685&psc=1
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on July 12, 2022, 01:10:10 PM
plug it... i did. tire had 2k on it when i found the nail ... has about 11k on it now and ready for replacement. looks like a Dunlop AE same as mine. did have a comander 2 a few years ago that picked up a 3/8 bolt, that one went into the trash can.     i used a regular ol rope plug, from  a kit i picked up at napa
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on July 13, 2022, 06:09:39 AM
Sunday afternoon got back from a 3597 mile 10 day trip to SD.  Badlands and Black Hills were fantastic.  Temperatures other than on the way out were in high 70's and low 80's.  Just over 61K miles on the 19 CVO now.
Title: Re: What did you do to or on your CVO today?
Post by: HOGMIKE on July 13, 2022, 09:16:13 AM
Sunday afternoon got back from a 3597 mile 10 day trip to SD.  Badlands and Black Hills were fantastic.  Temperatures other than on the way out were in high 70's and low 80's.  Just over 61K miles on the 19 CVO now.

Dave: not quite at 60 k on my 2019 yet but got about 35k on the big motor now.
Still amazed at the quiet power and 42-45 mpg at “normal to fast” riding 2up.
Baker grudge box working out fine.
Had to “beef up” my compensator a bit, last part in the drive train that needed some attention!

We have some long rides coming up next few months along CA, NV, OR, WA so 60k miles will be there!

Just finished up my 50 k service, new rear tire (17500 on the old one), new plugs (NGK still looked ok at 40k on the old ones) and other service as listed in the manual.
Ride on!

Title: Re: What did you do to or on your CVO today?
Post by: osis on July 15, 2022, 10:51:15 AM
Got my yellow bird home  :bananarock: :bananarock:

Title: Re: What did you do to or on your CVO today?
Post by: RustyBrainpan on July 15, 2022, 04:47:25 PM
Since all it does here in SC is rain these days I considered installing a rudder on my CVO but instead I installed Dominator 10" Meat Hook bars, Rekluse clutch slave cylinder, Fuel Moto 2-1-2 Jackpot headers and Motorola MA1 for wireless android auto.
Title: Re: What did you do to or on your CVO today?
Post by: CVODON on July 16, 2022, 05:43:26 PM
Take the tire off, put a Quality patch on and ride away. I have done it and would do it again. I also bought a tire off a buddy who had replaced it due to a finishing nail. I got 16,000 out of that one after patching without ever a problem.
Title: Re: What did you do to or on your CVO today?
Post by: TN on July 17, 2022, 08:03:43 PM
Long day in the saddle  :orange:

Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on July 18, 2022, 12:14:13 PM
Is that near Jenkins Ky
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on July 23, 2022, 08:26:13 AM
Dave: not quite at 60 k on my 2019 yet but got about 35k on the big motor now.
Still amazed at the quiet power and 42-45 mpg at “normal to fast” riding 2up.
Baker grudge box working out fine.
Had to “beef up” my compensator a bit, last part in the drive train that needed some attention!

We have some long rides coming up next few months along CA, NV, OR, WA so 60k miles will be there!

Just finished up my 50 k service, new rear tire (17500 on the old one), new plugs (NGK still looked ok at 40k on the old ones) and other service as listed in the manual.
Ride on!
I'm just under 40K on the 130" motor.  The motor needs a complete rebuild.

A lifter roller seized, made no noise that I heard so the roller and cam lobe wore together for awhile.  Then a piece of the roller broke of, and the needles went though the motor as did the pipes of the roller.  Believe me I heard that when it broke.

Title: Re: What did you do to or on your CVO today?
Post by: HOGMIKE on July 23, 2022, 09:52:22 AM
I'm just under 40K on the 130" motor.  The motor needs a complete rebuild.

A lifter roller seized, made no noise that I heard so the roller and cam lobe wore together for awhile.  Then a piece of the roller broke of, and the needles went though the motor as did the pipes of the roller.  Believe me I heard that when it broke.

Well that just sucks!
Sounds like a complete teardown and major cleanup!

I had planned to look in the cam chest later this year just to check the condition of the cam and rollers.
I stayed with a mild cam, tts200, S&S lifters, thinking it would be easy on the valve train.
Did have to upgrade the valve springs though.

I have a set of fueling lifters that they gave me as a replacement for some I used that tested marginal.
Good customer service on that!

What are your plans? Repairs  or replacement?

 :nixweiss:

Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on July 24, 2022, 09:22:09 AM
Well that just sucks!
Sounds like a complete teardown and major cleanup!

I had planned to look in the cam chest later this year just to check the condition of the cam and rollers.
I stayed with a mild cam, tts200, S&S lifters, thinking it would be easy on the valve train.
Did have to upgrade the valve springs though.

I have a set of fueling lifters that they gave me as a replacement for some I used that tested marginal.
Good customer service on that!

I stayed under 500 lift to be easy on valve train, 482 lift.  Yes it does suck.  Motor will be completely disassembled, cleaned and all bearing replaced and anything else that needs replacement.  Crank will be inspected and trued.  really the only option.



What are your plans? Repairs  or replacement?

 :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: HOGMIKE on July 24, 2022, 11:37:46 AM
I see! LOL

Not wasting any time for sure!
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on July 24, 2022, 09:03:31 PM
That's a big reason I decided not to touch my mako. Bone stock as for the motor and I don't even care.  Really sorry to hear dave.   What else can I say    I hope it gets fixed soon.  Stuart.



Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on July 25, 2022, 01:29:09 PM
Holy $hit Dave, so sorry to hear about this. Wow, whose lifters were those? Keep us in the loop on your progress.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on July 26, 2022, 07:03:28 AM
I see! LOL

Not wasting any time for sure!
I just worry about supply chain issues.  Got a whole lot of stuff ordered yesterday.

That's a big reason I decided not to touch my mako. Bone stock as for the motor and I don't even care.  Really sorry to hear dave.   What else can I say    I hope it gets fixed soon.  Stuart.

Doubt this is a failure because of the motor being built.  It's a low lift cam, 482 lift so I could stay with lower pressure springs. 

The roller on the lifter just seized.  Unfortunately it made no noise.  Metal on metal friction and it finally wore down and broke.

I had lifter failure on my stock 09 CVORG and on my 15 CVORGU.  The 15 was with 44K miles the day before the warranty expired. 

Holy $hit Dave, so sorry to hear about this. Wow, whose lifters were those? Keep us in the loop on your progress.

Those were Woods Alpha lifters.  I have used them with great luck, until now.
Title: Re: What did you do to or on your CVO today?
Post by: Mr D on July 26, 2022, 08:06:03 PM
I installed large Diameter Saddle Bag Guards from Bad Boyz Cyclez.
Same diameter as the Chopped engine Guard. Looks good.

That looks great  :2vrolijk_21:...can you post a full angle pic of the bike
Title: Re: What did you do to or on your CVO today?
Post by: acevtwin on July 27, 2022, 02:07:16 PM
That looks great  :2vrolijk_21:...can you post a full angle pic of the bike
I tried and as usual, my picture file is too large to post.  Sorry
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on July 27, 2022, 02:47:54 PM
I tried and as usual, my picture file is too large to post.  Sorry
Just a thought... try posting/adding pic in the Members Bike (https://www.cvoharley.com/smf/index.php?action=gallery;cat=1) section of the Gallery and then copy/paste the BB Code to a post here... may/may not work. :nixweiss:

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: BigLock on August 04, 2022, 06:40:32 AM
It's not what I do to my 18 M8 CVO but what my CVO do to me. Traveling to Maggie Valley
 yesterday just outside of Asheville my motor let go I think a lifter let go in it sound like  the motor is destroyed .
Title: Re: What did you do to or on your CVO today?
Post by: smkymtnboy on August 04, 2022, 07:47:11 AM
It's not what I do to my 18 M8 CVO but what my CVO do to me. Traveling to Maggie Valley
 yesterday just outside of Asheville my motor let go I think a lifter let go in it sound like  the motor is destroyed .
hopefully, you have esp protection.
Title: Re: What did you do to or on your CVO today?
Post by: BigLew on August 04, 2022, 03:35:27 PM
It's not what I do to my 18 M8 CVO but what my CVO do to me. Traveling to Maggie Valley
 yesterday just outside of Asheville my motor let go I think a lifter let go in it sound like  the motor is destroyed

Wow I'm sorry to hear!

BigLew
Title: Re: What did you do to or on your CVO today?
Post by: BigLock on August 04, 2022, 09:38:01 PM
Yep I do have esp just week I inherited a nail in back tire so I'm having a hell of a time.

Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on August 15, 2022, 09:36:41 AM
Rode Betsy to a Cornhole match at my sister’s church. Placed 3rd. Then rode Orange Crush down to visit the dragon store later that evening. I hadn’t washed the Ohio road dust off OC so I gave her a good bath yesterday and a wax job.

New lifters and a new front tire on the agenda later, maybe next week, but prior to MV for sure.
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on August 15, 2022, 12:39:08 PM
I replaced my rear tire and ordered a new set of lifters a couple of weeks ago. A few days later after about 200 miles I picked up a bolt, yes a bolt, in that brand new tire! I got it patched right away and all was good. A few days later I picked up a nail in the same tire! WTF!!! So I am now on my second new rear tire in as many weeks. Ouch :nervous:
I had the new lifters installed yesterday and so far so good.
Going for a couple hundred mile ride here in a few minutes and hoping that it is uneventful other than what Mother Nature has to offer over on Whidbey Island.
Title: Re: What did you do to or on your CVO today?
Post by: TN on August 20, 2022, 09:03:12 AM
Was on the road at the crack of dawn this morning, riding on the road as the sun comes up is one of my favorite pleasures, something magical to me. This was a shakedown ride from having my bike on the lift for her yearly comprehensive physical among other things that needed addressed. I found a bolt missing from crossover pipe support on back of oil pan, I have noticed the left exhaust pipe vibrating at idle doing a walk around, I added a small spring in the compensator, I spooned it in rather than opposing to add some tension. I did this because I noticed lots of travel witness marks on the ramps and mating surface. Picture is from the good side as I screwed up right side muffler, dumbass move, I have another pair in route to me from the same type of bike. More to come on the work I did.


Go for a ride and enjoy
Title: Re: What did you do to or on your CVO today?
Post by: JoeVibe on August 21, 2022, 02:51:14 PM
Got my last two (for now) add ons done on the new bike. Janet's cup holder and paint protection film on the saddlebag lids (or as Janet calls them "her steps" 🙄.) All I have to do now is get some more miles on it before Maggie.

To follow up on this post - after a couple days I noticed the paint film was coming loose. I did a little research and found out that it won't stick if to ceramic coated surfaces. I did have the bike ceramic coated before putting the film on so apparently that won't work. I guess we'll just have to be careful when getting on and off the bike so we don't damage the bag lids.
Title: Re: What did you do to or on your CVO today?
Post by: LuvGun on August 25, 2022, 06:25:53 PM
Got a new seat  ;D
Title: Re: What did you do to or on your CVO today?
Post by: Mr D on August 25, 2022, 11:15:21 PM
Got a new seat  ;D

That seat pop’s  :drink:
Title: Re: What did you do to or on your CVO today?
Post by: LuvGun on August 26, 2022, 09:00:56 AM
That seat pop’s  :drink:

Thanks
Title: Re: What did you do to or on your CVO today?
Post by: acevtwin on August 26, 2022, 09:17:26 AM
That looks great  :2vrolijk_21:...can you post a full angle pic of the bike
Here's a side pic. Just started raining.
Title: Re: What did you do to or on your CVO today?
Post by: Mr D on August 26, 2022, 11:13:48 AM
Here's a side pic. Just started raining.

 :2vrolijk_21:Llooks great

How’s the comfort of the BB Freedom Seat
Title: Re: What did you do to or on your CVO today?
Post by: TN on August 28, 2022, 10:06:23 AM
New to me, mufflers.  :orange:

Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on August 29, 2022, 08:03:13 AM
It's not what I do to my 18 M8 CVO but what my CVO do to me. Traveling to Maggie Valley
 yesterday just outside of Asheville my motor let go I think a lifter let go in it sound like  the motor is destroyed .
Be glad you have ESP.  My failed lifter is costing a fortune.  I will be over 4K if not 5K with a friend and I doing the work.  Lifters had 40K miles on them.  Cam is low lift, only 482.  Not a quick ramp either.

I was hoping lifter failures were no longer with the M8, knew it was common on the 110.
Title: Re: What did you do to or on your CVO today?
Post by: BigLock on August 29, 2022, 09:14:46 AM
No Dave it was not the lifters that failed it looked like one of the piston destroyed everything. Like it started to melt or something it cracked broke like no oil but oil pump looked ok.ESP paying 7k to build a new motor the bike is still in Asheville at the dealership. Maybe it will not be to long and I'll have it back.
Title: Re: What did you do to or on your CVO today?
Post by: acevtwin on August 29, 2022, 09:36:56 AM
:2vrolijk_21:Llooks great

How’s the comfort of the BB Freedom Seat
The Bad Boyz Cyclez Freedom seat is the Best looking, Most comfortable seat I've ever had.
My wife Loves the passenger seat also.
Title: Re: What did you do to or on your CVO today?
Post by: Hondo2doc on August 29, 2022, 01:25:04 PM
Be glad you have ESP.  My failed lifter is costing a fortune.  I will be over 4K if not 5K with a friend and I doing the work.  Lifters had 40K miles on them.  Cam is low lift, only 482.  Not a quick ramp either.

I was hoping lifter failures were no longer with the M8, knew it was common on the 110.
Holy chit 4 to 5k on a rebuild on damage done by lifters and you're doing most of your own work? That sucks very sorry to hear that.

Does that mean I should replace my stock lifters at no more than 30k miles? I have a 2021 SESG with the 131ci kit installed.

Sent from my SM-G991B using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: HOGMIKE on August 29, 2022, 04:48:03 PM
Holy chit 4 to 5k on a rebuild on damage done by lifters and you're doing most of your own work? That sucks very sorry to hear that.

Does that mean I should replace my stock lifters at no more than 30k miles? I have a 2021 SESG with the 131ci kit installed.

Sent from my SM-G991B using Tapatalk

Make sure you have a warranty on everything added to your bike.
Is it a dealer install on the 131? If so, it should be covered.

 :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on August 29, 2022, 09:42:54 PM
Added ciro 3D fang lights to my Mako. .  Pretty cool. 👍
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on August 30, 2022, 07:50:12 AM
No Dave it was not the lifters that failed it looked like one of the piston destroyed everything. Like it started to melt or something it cracked broke like no oil but oil pump looked ok.ESP paying 7k to build a new motor the bike is still in Asheville at the dealership. Maybe it will not be to long and I'll have it back.
Okay you had said you thought lifter.  Wow, that is a more unusual failure.  They for sure need to figure out why that piston crack or started to melt. I hope it does not take them long.

I am out around 5K on mine.  When it all back together I'll add it up.  Had to tear it all the way down, metal in everything.  Crank was trued, pinned and weld.  bottom end is going together now.

Glad I have other bikes to ride.
Title: Re: What did you do to or on your CVO today?
Post by: Hondo2doc on August 30, 2022, 07:58:17 AM
Make sure you have a warranty on everything added to your bike.
Is it a dealer install on the 131? If so, it should be covered.

 :nixweiss:
Yes 131 ci kit done by my dealer immediately upon new purchase and totally under warranty. Thanks

Sent from my SM-T500 using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on September 03, 2022, 08:41:17 PM
Beautiful day to ride here in South WV and VA. Wmustang led us on a jaunt to Roanoke Valley HD so Miss Susan could get a new helmet, then we ate at Jersey Lilly Roadhouse in Salem and returned via New Castle VA. A total of 210 beautiful miles with good friends on a sunny day. It don't get no better than that.
Title: Re: What did you do to or on your CVO today?
Post by: TN on September 04, 2022, 07:39:44 AM
Get out the chair' and go for a ride  :orange:
Title: Re: What did you do to or on your CVO today?
Post by: Jock on September 04, 2022, 02:39:20 PM
Tried to purchase a rear tire, none in stock, 7 day wait, deposit of $250.  Ahhhh No!

 :o
Title: Re: What did you do to or on your CVO today?
Post by: KGB on September 04, 2022, 04:41:40 PM
Tried to purchase a rear tire, none in stock, 7 day wait, deposit of $250.  Ahhhh No!

 :o
You're lucky it's just a 7 day wait Dick, I purchased a set a couple of months ago, they made to Akron on UPS, then disappeared, but that's another story, I usually would be replacing them now, but haven't rode as much this year, so I have a set ready to go when needed


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: OBB on September 04, 2022, 07:41:07 PM
Changed the oil in both bikes today. The '15 is at 45k miles and the '12 is at 35k miles.


Sent from my SM-N981U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on September 07, 2022, 04:34:59 PM
Who is that fella with the devilish grin?

Title: Re: What did you do to or on your CVO today?
Post by: Jock on September 07, 2022, 06:44:38 PM
You're lucky it's just a 7 day wait Dick, I purchased a set a couple of months ago, they made to Akron on UPS, then disappeared, but that's another story, I usually would be replacing them now, but haven't rode as much this year, so I have a set ready to go when needed


Sent from my iPhone using Tapatalk

Holy  :o  :o  :o
Title: Re: What did you do to or on your CVO today?
Post by: BigLock on September 21, 2022, 08:26:43 AM
Get my bike back from the dealer yesterday after my motor went south on me. ESP replaced everything but one head new bottom end  cylinders pistons oil pan n cooler. It was all stock motor except for SE power cam and SE street tuner after they replaced everything I had them to replace the intake manifold with the SE one. So ESP pay around 6500. Now for the breakin miles.
Title: Re: What did you do to or on your CVO today?
Post by: smkymtnboy on September 22, 2022, 12:42:10 AM
Get my bike back from the dealer yesterday after my motor went south on me. ESP replaced everything but one head new bottom end  cylinders pistons oil pan n cooler. It was all stock motor except for SE power cam and SE street tuner after they replaced everything I had them to replace the intake manifold with the SE one. So ESP pay around 6500. Now for the breakin miles.
glad they took care of u. good advertisement for the warranty company.which one stepped up?
Title: Re: What did you do to or on your CVO today?
Post by: BigLock on September 22, 2022, 06:56:04 PM
 The one endorsed by HD CNA
Title: Re: What did you do to or on your CVO today?
Post by: BigLock on September 22, 2022, 07:02:20 PM
I've put 843 miles on it so far next trip will be for the 1000 mile breaking oil change.
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on September 28, 2022, 12:14:43 PM
Had a little annoying vibration in Orange Crush that started on the ride up to Ohio in July. Checked a bunch of stuff between then and Maggie Valley and the only thing that helped was loosening and retightening the stabilizer on the front of the engine. I could actually feel the vibration go away each time I layed the bike over to either side in a curve or simply going straight and deliberately swerving right and left. But each time the bike returned to center the vibration was back.

So I finally broke down and got a new stabilizer and viola, problem solved. So if you have a little vibration, check the stabilizer. Mine at 37,000 miles had quite a bit of play in it compared to the new unit.
Title: Re: What did you do to or on your CVO today?
Post by: KGB on September 28, 2022, 05:44:23 PM
Had a little annoying vibration in Orange Crush that started on the ride up to Ohio in July. Checked a bunch of stuff between then and Maggie Valley and the only thing that helped was loosening and retightening the stabilizer on the front of the engine. I could actually feel the vibration go away each time I layed the bike over to either side in a curve or simply going straight and deliberately swerving right and left. But each time the bike returned to center the vibration was back.

So I finally broke down and got a new stabilizer and viola, problem solved. So if you have a little vibration, check the stabilizer. Mine at 37,000 miles had quite a bit of play in it compared to the new unit.
(https://uploads.tapatalk-cdn.com/20220928/35c8d24ea00c3013eb8ac99c73dd0267.jpg)

Mike, This one caused a whole lot of vibration, the swivel froze in the stabilizer bar and the torque broke the bolt, rode it that way back from NC, it was on my 2015 SGS, only had 8K on it


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on September 28, 2022, 07:23:17 PM
I'd say that did cause some vibration
Title: Re: What did you do to or on your CVO today?
Post by: TN on September 29, 2022, 09:01:29 AM
So I finally broke down and got a new stabilizer and viola, problem solved. So if you have a little vibration, check the stabilizer. Mine at 37,000 miles had quite a bit of play in it compared to the new unit.

Did you get the chrome SE part for replacement?  ;D
Title: Re: What did you do to or on your CVO today?
Post by: TN on September 29, 2022, 09:03:39 AM
 I checked for codes on my bike yesterday, PO374 CPK sensor sync error, B1154 Clutch Switch Short-to-ground showed up. I’ve never seen these on my bike so after I checked for the simple things, connections and such I cleared them and went for another ride, no more codes. I got to thinking and while in Maggie Valley on a long group ride there was several sections where I pulled clutch lever in and coasted for a long time on some downhill stretches, curves involved. This is where I have a question would coasting at speeds 30 to 40mph then engaging clutch when necessary, would it cause these codes to show up?
Title: Re: What did you do to or on your CVO today?
Post by: KGB on September 29, 2022, 03:47:17 PM
I checked for codes on my bike yesterday, PO374 CPK sensor sync error, B1154 Clutch Switch Short-to-ground showed up. I’ve never seen these on my bike so after I checked for the simple things, connections and such I cleared them and went for another ride, no more codes. I got to thinking and while in Maggie Valley on a long group ride there was several sections where I pulled clutch lever in and coasted for a long time on some downhill stretches, curves involved. This is where I have a question would coasting at speeds 30 to 40mph then engaging clutch when necessary, would it cause these codes to show up?
Or maybe when you went trail riding at the Big Muskie Bucket in Ohio


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on September 29, 2022, 05:13:44 PM
Did you get the chrome SE part for replacement?  ;D

No I got the chrome factory replacement that really don’t look chrome
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on September 29, 2022, 05:15:10 PM
I’m with Keith on the clutch ground.

It grounded when it hit the grass
Title: Re: What did you do to or on your CVO today?
Post by: TN on September 29, 2022, 07:04:44 PM
Or maybe when you went trail riding at the Big Muskie Bucket in Ohio

I’m with Keith on the clutch ground.
It grounded when it hit the grass

Uncle, I'm having a patch made "Keep off the grass"


Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on September 29, 2022, 07:21:38 PM
That's way too easy, you are no fun.
Title: Re: What did you do to or on your CVO today?
Post by: HOGMIKE on October 07, 2022, 08:41:51 AM
Okay you had said you thought lifter.  Wow, that is a more unusual failure.  They for sure need to figure out why that piston crack or started to melt. I hope it does not take them long.

I am out around 5K on mine.  When it all back together I'll add it up.  Had to tear it all the way down, metal in everything.  Crank was trued, pinned and weld.  bottom end is going together now.

Glad I have other bikes to ride.


After all the lifter issues people have posted in the last few months I got to thinking maybe I should take a look at mine. This new engine has about 40k miles now, bike has 65k.

I just got back from a 2600 mile road trip with the bike running fine. Loaded 2up and 85 mph running for some long stretches and stop and go in the cities. A little bit of everything as far as the trip.

Got the bike on the lift yesterday and pulled the lifters and took a peek at the cam lobes. Very little wear marks on the cam or lifters. Rollers “feel” fine.

Valve train consists of fueling springs, SE adjustable tapered pushrods, S&S lifters, TTS 200 cam. S&S oil pump and plate.

As the motor was running great, and no noise I put everything back together.
I hope I didn’t jinx myself for worrying too much!

There are alternatives to the Harley 131 kit that is not available in CA.
It just takes some builders who have had success with certain combos and a GOOD tuner.

JMHO  :nixweiss:


Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on October 13, 2022, 10:01:36 AM
After 30000 miles I figured it was time to change out the lifters in Orange Crush. I hoped that given the fact that I had changed the cam out at least 20000 miles ago that they would look relatively good with no need to replace the cam, which would be impossible to source since TC 24D cams have been out of production a long time.

I was very pleasantly surprised to see the old lifters looking basically new. No spalling at all and no scratches on the lifter bores. I changed them out anyway with a set of the newly re-designed S&S lifters, the ones with the oil holes at roughly 45 degrees of the body.

Should be good for a while.
Title: Re: What did you do to or on your CVO today?
Post by: smkymtnboy on October 13, 2022, 10:06:46 AM
After 30000 miles I figured it was time to change out the lifters in Orange Crush. I hoped that given the fact that I had changed the cam out at least 20000 miles ago that they would look relatively good with no need to replace the cam, which would be impossible to source since TC 24D cams have been out of production a long time.

I was very pleasantly surprised to see the old lifters looking basically new. No spalling at all and no scratches on the lifter bores. I changed them out anyway with a set of the newly re-designed S&S lifters, the ones with the oil holes at roughly 45 degrees of the body.

Should be good for a while.
smart move!!
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on October 15, 2022, 08:56:46 PM
Today the weather was nice, well as nice as it gets around here this time of year, so a few of us locals decided to ride to eat at a place called Sarah's restaurant near Troutdale VA. We road across the Back of the Dragon to Marion and down 16 to Troutdale. Along the way "Country Ham" lost his rear brakes so we decided to flush his brake fluid at the Advance Auto in Marion, VA. Luckily they had a bleader in the stash of tools they loan out, so the repair didn't take but maybe 30 minutes. We got to the restaurant and had a fine lunch, the owners, Bruce Cook and his lady friend Sarah, are good people and the service was very good. Some of you may remember Bruce as he and his partner once owned Stations Inn in Laurel Springs, NC. Bruce restores vintage motorcycles and has his 51 model Chief perched in the front window of the restaurant.

After eating lunch we rode on down 16 to 58 to Indepedence VA, then up 94 through Fries to 52 and over the mountains back home, with a brief stop in Wytheviie to eat some Ice Cream. Great day to ride with good friends on what may be our last ride for 2022.
Title: Re: What did you do to or on your CVO today?
Post by: Joel on October 15, 2022, 09:43:40 PM
Road all the way down to Pint House for a burger and a  couple barley pops, must have covered 5 miles in one evening.
But well worth it.
Title: Re: What did you do to or on your CVO today?
Post by: TN on October 16, 2022, 09:59:01 AM
Took a sunrise ride this morning, without a tourpak the bike is much more nimble. I have one more mod to complete this bike, it will be done by the first of next year.  :orange:
Title: Re: What did you do to or on your CVO today?
Post by: BostonboyDH on October 20, 2022, 06:03:08 PM
Sorry I sold mine & it breaks my heart every time you post that gorgeous 09 ! Keep on rollin TN !!!
Title: Re: What did you do to or on your CVO today?
Post by: bigC on October 20, 2022, 09:33:01 PM
On a week long ride and woke up this morning to this view from my hotel in Gulfport MS.
Title: Re: What did you do to or on your CVO today?
Post by: TN on October 21, 2022, 06:38:53 AM
Sorry I sold mine & it breaks my heart every time you post that gorgeous 09 ! Keep on rollin TN !!!

Roger that, if I remember correctly you bought a new lowrider st, I'm sure that is a blast to ride. So I know you got that grin on yer face.  ;D


On a week long ride and woke up this morning to this view from my hotel in Gulfport MS.

Living the dream  :2vrolijk_21: I was gonna pull a Clay on you but I'm maturing.  :drink:
Title: Re: What did you do to or on your CVO today?
Post by: TN on October 23, 2022, 01:08:35 PM
Rode by one of my usual stops this morning to see if anything is being done for the premier car show in our area next month in Port Royal Plantation. I don’t think any hot laps will be run here unfortunately. Behind the fence is pit area, it’s being used as storage for development on Island. Vintage motorcycles are always at the show.

https://www.hhiconcours.com/
Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on October 24, 2022, 12:13:46 PM
Put in the shop to get neck bearings and rear tire. This riding season was a bust for me, maybe 500 miles … my new knee doesn’t like me or something, not healing very good yet
Title: Re: What did you do to or on your CVO today?
Post by: KGB on October 24, 2022, 04:38:33 PM
Put in the shop to get neck bearings and rear tire. This riding season was a bust for me, maybe 500 miles … my new knee doesn’t like me or something, not healing very good yet
I hope it's not infected, had a left hip replaced in February of 21, got infected in December, had to have a revision in march of 22 along with a bunch of other stuff, I didn't even wear out a set of tires this year


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: TN on November 03, 2022, 10:30:43 PM
Replaced the kickstand mounting bracket on my 09, they had a recall/tech bulletin out back in the day. It was for lean angle, some 09 FLH models had a bracket that had more lean angle, I ignored it. It helped in my situation as I wanted less lean angle at rest. I’ve only owned the bike for 14 years.

Title: Re: What did you do to or on your CVO today?
Post by: TN on November 14, 2022, 07:32:23 AM
 Got home from a Sunday morning ride and no right side saddle bag, this bag carries all my tools and such so it’s prolly over weight capacity. in a frizzy I jumped in my truck and started backtracking my route. Just a mile or two up the road there it was, contents intact. Maybe it’ll buff out.  :drink: First bag I’ve lost with many miles under my belt. I had a u-nut and bolt on the rear mount, dzus fastener on front. I did notice a few months ago the bolt backed out on the bag on the other side and have been paying attention. Apparently not close enough, I don’t won’t this to happen to anyone else so just a heads up. There will be a foolproof method on my bike before too long. At least I found it.  :)
Title: Re: What did you do to or on your CVO today?
Post by: ChopperPilot on November 14, 2022, 08:34:35 AM
Well that sucks!
Title: Re: What did you do to or on your CVO today?
Post by: HOGMIKE on November 14, 2022, 08:46:57 AM
I hope you can save the paint!
I’m using the same mounting setup you are on 2 of my bikes, I’ll be looking more closely from now on!

Title: Re: What did you do to or on your CVO today?
Post by: HOGMIKE on November 14, 2022, 08:48:19 AM
Rear mount
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on November 14, 2022, 10:14:45 AM
Man that really sucks about your bag.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on November 14, 2022, 02:34:02 PM
Sorry to hear that Phil. Like others have said, glad you found it.  I use the plastic knobs myself on mine and on one trip they had both loosened up. I find myself checking them from time to time.

Sent from my SM-N981U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: bigC on November 14, 2022, 09:02:26 PM
Sorry to hear Phil. At least you found it and the contsnts.
Title: Re: What did you do to or on your CVO today?
Post by: BigLock on November 14, 2022, 09:39:39 PM
I bought the OEM Rushmore one's for my 12 CVORG.
Title: Re: What did you do to or on your CVO today?
Post by: TN on November 15, 2022, 07:22:58 AM
I came up with this from what I had in my garage, stainless bolt, captive washer, small spacer, lock washer and same flat washer against the bag grommet, there is a small o-ring last over bolt to keep assembly in place when using for convenience. I can squash the lock washer flat just using my fingers while tightening. Gonna try it and report back. I do have some contents in this bag and glad I found it just for this reason. Maybe I should lighten the load some, I kept adding over the years till it was full, ballast for smooth sailing.  :drink:
Title: Re: What did you do to or on your CVO today?
Post by: KGB on November 15, 2022, 12:57:00 PM
I came up with this from what I had in my garage, stainless bolt, captive washer, small spacer, lock washer and same flat washer against the bag grommet, there is a small o-ring last over bolt to keep assembly in place when using for convenience. I can squash the lock washer flat just using my fingers while tightening. Gonna try it and report back. I do have some contents in this bag and glad I found it just for this reason. Maybe I should lighten the load some, I kept adding over the years till it was full, ballast for smooth sailing.  :drink:

Damm, where do you put your jacket!
Title: Re: What did you do to or on your CVO today?
Post by: OBB on November 15, 2022, 01:27:21 PM
I came up with this from what I had in my garage, stainless bolt, captive washer, small spacer, lock washer and same flat washer against the bag grommet, there is a small o-ring last over bolt to keep assembly in place when using for convenience. I can squash the lock washer flat just using my fingers while tightening. Gonna try it and report back. I do have some contents in this bag and glad I found it just for this reason. Maybe I should lighten the load some, I kept adding over the years till it was full, ballast for smooth sailing.  :drink:
Leave a couple of those gold bars at home next time. It'll lighten the load.

Sent from my SM-N981U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: TN on November 15, 2022, 10:52:05 PM
Damm, where do you put your jacket!

Wherever I can.

That is what I saw when I opened up my stray bag, it can still hold a pair of chaps, gloves and maybe a bottle of water if packed neatly. It’s been a welcome sight when someone is broke down on side of the road more than a few times. One of my favorite saves is using my siphon hose to drain out a full tank of diesel on a bike that stalled out.  ;D

Back to normal, even got a ride in today.  :orange:
Title: Re: What did you do to or on your CVO today?
Post by: GKroadking on November 16, 2022, 02:55:34 AM
Sorry to hear this.
Had the same on my prior CVO Road King, case lost while driving.

These are installed on my new CVO Street Glide: Harley Davidson 90201540 Saddlebag Bag Mount Lever Kit. I think they hold up for sure.

Take care  :)

Title: Re: What did you do to or on your CVO today?
Post by: KGB on November 16, 2022, 05:13:07 AM
Wherever I can.

That is what I saw when I opened up my stray bag, it can still hold a pair of chaps, gloves and maybe a bottle of water if packed neatly. It’s been a welcome sight when someone is broke down on side of the road more than a few times. One of my favorite saves is using my siphon hose to drain out a full tank of diesel on a bike that stalled out.  ;D

Back to normal, even got a ride in today.  :orange:

No need to rub it in!
Title: Re: What did you do to or on your CVO today?
Post by: Motorheads on November 26, 2022, 03:10:38 PM
Went on a couple hour ride, to test out the recently fixed Heated seat. Had to make sure that is was not just the switch lighting up, but actually get heated buns. Well my buns heated up, so success!
Then managed to go the local  (Motor City) HD dealer, and only spend a whopping 5 bucks!
Needed to fix my squeaky left side exhaust. Purchased a new rubber isolater (hangar) for the slip on. So far so good. Tried lubing the old one, but it only lasted a short time.
Title: Re: What did you do to or on your CVO today?
Post by: Joel on November 26, 2022, 06:50:24 PM
Well I guess I did save some money when I fixed the squeaking insulator on my old RoadKing by pushing in a penny between the mounting plate and insulator.  Road it for another year that way before I sold it. 
Title: Re: What did you do to or on your CVO today?
Post by: Motorheads on November 29, 2022, 05:38:04 PM
Found the auxiliary switch plug (under the seat).

Fixed the dead battery tender pigtail (P.O. did not hook the ground back up).

Moved the battery tender pigtail away from the exhaust. Discovered it has a built in protective cover. Tucked it between the oil fill and starter.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on November 30, 2022, 10:24:05 AM
Well I took the freshly rebuilt CVO road glide for an 80 mile ride.  Seems as good as ever.
Title: Re: What did you do to or on your CVO today?
Post by: HD Street Performance on December 01, 2022, 10:10:12 AM
Congrats! Good to hear.
Title: Re: What did you do to or on your CVO today?
Post by: cahdbiker on December 02, 2022, 12:48:54 PM
Hi Fellas, Haven't posted for awhile. I replaced the heated grips on my 09 SEUC. The grips had to  be ordered and cost  me over $500 bucks. Didn't come with any directions but I heard they are useless anyways. I have the service manual and the supplement which were very useful. I took my time and worked on it a little bit every evening for about 5 nights. Mission accomplished and they work great. As per my heat gun they reached 107 after about 15 minutes. Everything was pretty easy except for pulling the new wires thru the left handlebar side. That was a super pain but patience and tenacity prevailed. After I finished I realized a super short cut. Most of you know that the twist grip side is basically unplug the grip remove the grip and put the new grip on. Very simple. On the left side of course that is a different story. If I had to do this job again I would use the existing wires as they are the same color codes and there is enough slack to pull so that a person could snip them and snip the wires on the new grip, solder new wires to old wires and be done in a reasonable period of time. If you are going to tackle this you are welcome to email me with any questions. Best Regards CAHDBIKER
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on December 02, 2022, 01:20:11 PM
Well I took the freshly rebuilt CVO road glide for an 80 mile ride.  Seems as good as ever.

That had to be an expensive endeavor, but I'm glad it's in your rear view now Dave. Congrats!
Title: Re: What did you do to or on your CVO today?
Post by: TN on December 05, 2022, 10:31:26 PM
Had these fork cartridges since 2009, they have a few miles on them. They were rebuilt once before by Traxxion 45k + miles ago. I took the project on and it turned out pretty good,  All that was required was a few cans of cleaner, new bushings for the tubes, fork seals and one liter of Maxima fork oil. I did buy a generic fork service tool kit too. I'’ve been very happy with performance and ride of the AK-20 cartridges.

Title: Re: What did you do to or on your CVO today?
Post by: Scott7d on December 12, 2022, 05:22:41 PM
Weather is still hangin' tough here in central Indiana. Took a 120-mile cruise before work today. 250 more miles will make 43,000 on the year. That will beat my old personal record by 10,000 miles. 2022 was an amazing year.

EDIT: Sorry the images are so big. Not sure why it's doing that.


(https://www.roadglide.org/cdn-cgi/image/format=auto,onerror=redirect,width=1920,height=1920,fit=scale-down/https://www.roadglide.org/attachments/pxl_20221023_173351428-jpg.452572/)
(https://www.roadglide.org/cdn-cgi/image/format=auto,onerror=redirect,width=1920,height=1920,fit=scale-down/https://www.roadglide.org/attachments/pxl_20221203_182858101-jpg.452571/)
Title: Re: What did you do to or on your CVO today?
Post by: iski on December 13, 2022, 12:03:52 AM
Rode the bike to town to get some touch up paint for the truck.  Weather was great, high 60s & no rain.  So took a ride from there until I got hungry, then stopped for a hamburger.  Well it was 2 burgers but who's counting.  After that took a ride with "no particular place to go" until I got to a particular place, then I rode home.  Might do the same tomorrow, except for the paint & the burgers.
Title: Re: What did you do to or on your CVO today?
Post by: michaelokielee@yahoo.com on December 13, 2022, 09:11:32 AM
Weather is still hangin' tough here in central Indiana. Took a 120-mile cruise before work today. 250 more miles will make 43,000 on the year. That will beat my old personal record by 10,000 miles. 2022 was an amazing year.


Great looking RG, who makes the passenger adjustable pegs you have, does your wife like them and how tall is she?  Just asking, my wife gets a little restless with her feet on long rides and might like something like that on my bike, TIA
Title: Re: What did you do to or on your CVO today?
Post by: Scott7d on December 14, 2022, 12:00:20 AM
Great looking RG, who makes the passenger adjustable pegs you have, does your wife like them and how tall is she?  Just asking, my wife gets a little restless with her feet on long rides and might like something like that on my bike, TIA

Thanks! Those are made by Kuryakyn: https://www.denniskirk.com/kuryakyn/gloss-black-adjustable-passenger-pegs-7059.p4902357.prd/4902357.sku?gclid=Cj0KCQiA4uCcBhDdARIsAH5jyUn-df3mic-PMKNi8-iCiVSCXQD3pfSXAyVDPJ-BGUIiUJ5t29e9gMgaAnyyEALw_wcB

Those pegs make a huge difference for my wife on long trips, she's 5'1". Just like how highway pegs work for the rider, she is able to shift her legs and feet into different positions to keep from getting sore. After buying these, all of my buddies in our long-distance riding group bought a set for their ladies. They all love em'.
Title: Re: What did you do to or on your CVO today?
Post by: michaelokielee@yahoo.com on December 14, 2022, 06:44:47 AM
Thanks! Those are made by Kuryakyn: https://www.denniskirk.com/kuryakyn/gloss-black-adjustable-passenger-pegs-7059.p4902357.prd/4902357.sku?gclid=Cj0KCQiA4uCcBhDdARIsAH5jyUn-df3mic-PMKNi8-iCiVSCXQD3pfSXAyVDPJ-BGUIiUJ5t29e9gMgaAnyyEALw_wcB

Those pegs make a huge difference for my wife on long trips, she's 5'1". Just like how highway pegs work for the rider, she is able to shift her legs and feet into different positions to keep from getting sore. After buying these, all of my buddies in our long-distance riding group bought a set for their ladies. They all love em'.

Thank you Sir!!!
Title: Re: What did you do to or on your CVO today?
Post by: TN on December 24, 2022, 07:03:28 AM
Taking a break for the week of winter weather we’re having.  :drink:

Merry Christmas  :santa2:
Title: Re: What did you do to or on your CVO today?
Post by: Motorheads on December 24, 2022, 11:18:07 AM
Received my custom sized CVO stickers. A good friends of mine at Gladiator Graphics hooked me up. He's got a nice variety of products for the HD world.
(http://)
Needed a small size to fit at the lower edge of my front fender. Hafta wait for a little warmth to put them on. 3 degrees here in Michigan ain't gonna cut it!
You can find him at Www.etsy.com/shop/electraglideapparel
Title: Re: What did you do to or on your CVO today?
Post by: Joel on December 24, 2022, 03:23:08 PM
Those stickers are nice.
Went to the web site but didn't see them.
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on December 24, 2022, 04:27:08 PM
Those stickers are nice.
Went to the web site but didn't see them.
Try this link (https://www.etsy.com/listing/1340282215/hd-cvo-bagger-decal?click_key=bba981e1f5272ecd40949ad2134d60a7e49222bc%3A1340282215&click_sum=6478b903&ref=shop_home_feat_2&variation1=3033734373).

(https://i.etsystatic.com/33583152/r/il/05d471/4319079604/il_794xN.4319079604_9sb7.jpg)

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: Motorheads on December 26, 2022, 02:00:51 PM

This should work. www.Etsy.com/shop/electraglideapparel. There is a ton of cool stuff on the site. The decals are available within the site.
Title: Re: What did you do to or on your CVO today?
Post by: Maverick714 on January 17, 2023, 05:49:09 PM
Yes it does. It's the first CVO SG paint that I have liked since I bought the UV/ML.

Loving my 2021 Sunset Orange as well!  The paint really pops in the sun!  BTW, I've been trying to find out production numbers for the 2021 Sunset Orange but haven't found anything.  @JC or anyone...Any luck in finding out how many of this color were made? Just curious...
Title: Re: What did you do to or on your CVO today?
Post by: TN on January 19, 2023, 03:17:43 PM
Weather got warm here today 79* so it was time for a long ride, I needed it.  :orange:

Replaced the big HD decal I had on my tourpak with an Old Glory reflective decal, I’ve got the same one on my chopped tourpak.

Title: Re: What did you do to or on your CVO today?
Post by: KGB on January 19, 2023, 04:37:26 PM
Weather got warm here today 79* so it was time for a long ride, I needed it.  :orange:

Replaced the big HD decal I had on my tourpak with an Old Glory reflective decal, I’ve got the same one on my chopped tourpak.
Damm 79 nice


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Jock on January 22, 2023, 10:11:06 AM
Weather got warm here today 79* so it was time for a long ride, I needed it.  :orange:

Replaced the big HD decal I had on my tourpak with an Old Glory reflective decal, I’ve got the same one on my chopped tourpak.


Atta Boy!
Title: Re: What did you do to or on your CVO today?
Post by: Mr D on January 22, 2023, 12:50:01 PM
After seeing the reveal of the ‘23 CVO 💰

I’m keeping mine 😁👍🏼
Title: Re: What did you do to or on your CVO today?
Post by: SCHIMCVO19 on January 24, 2023, 08:09:48 AM
Added some 4.5 Tab Perforamance Slip-On's with Zombie Baffles.

Title: Re: What did you do to or on your CVO today?
Post by: Steve_G on January 27, 2023, 12:58:09 AM
I installed a Trask Checkm8.  PITA.  I hope it works as advertised!
Title: Re: What did you do to or on your CVO today?
Post by: rayson56 on January 27, 2023, 12:58:34 PM
Added some 4.5 Tab Perforamance Slip-On's with Zombie Baffles.

That's a great addition with everything else being left stock. A buddy of mine did the same upgrade to his 2018 CVO Road Glide and it sounds sweet. He was also able to use his stock heat shields (his is blacked out) and end caps, so it worked out really well. If you choose to do a head pipe and tune in the future you have the option of changing baffles after the CAT is gone to get your desired sound.

WIN, WIN!
Title: Re: What did you do to or on your CVO today?
Post by: TN on January 29, 2023, 01:49:08 PM
Went for a late Sunday morning ride. The Houlihan bridge is in the background, it is the last turnstile bridge in GA, located just north of the Savannah ports on the Savannah River. Construction in the background is on the new bridge to replace it.

Was a good ride   ;D




Title: Re: What did you do to or on your CVO today?
Post by: SCHIMCVO19 on January 30, 2023, 07:54:25 AM
That's a great addition with everything else being left stock. A buddy of mine did the same upgrade to his 2018 CVO Road Glide and it sounds sweet. He was also able to use his stock heat shields (his is blacked out) and end caps, so it worked out really well. If you choose to do a head pipe and tune in the future you have the option of changing baffles after the CAT is gone to get your desired sound.

WIN, WIN!

I am running the stock head pipe w/ cat removed, and a V&H tune.  I really like the 117 motor compaired to all the others I have ridden.
I even like it better than my buddies 131 .....
Title: Re: What did you do to or on your CVO today?
Post by: acevtwin on February 06, 2023, 02:04:31 PM
I  took advantage of the "warm" 39 degrees in Michigan yesterday and installed my new FOX Shocks.
They look great but I won't be able to dial them in or give feedback on them until
Daytona Beach Bike Week in March.
Title: Re: What did you do to or on your CVO today?
Post by: acevtwin on February 06, 2023, 02:05:13 PM
Pic 2
Title: Re: What did you do to or on your CVO today?
Post by: acevtwin on February 06, 2023, 02:05:44 PM
Pic3
Title: Re: What did you do to or on your CVO today?
Post by: acevtwin on February 06, 2023, 02:06:19 PM
Last one
Title: Re: What did you do to or on your CVO today?
Post by: TN on February 07, 2023, 07:24:00 AM
I  took advantage of the "warm" 39 degrees in Michigan yesterday and installed my new FOX Shocks.
They look great but I won't be able to dial them in or give feedback on them until
Daytona Beach Bike Week in March.

Looking good..... :2vrolijk_21:


Do you have any upgrades to the front suspension?
Title: Re: What did you do to or on your CVO today?
Post by: OBB on February 07, 2023, 08:09:23 AM
Pic 2
I like the looks of the easy preload/sag adjustment.

Sent from my SM-N981U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: acevtwin on February 07, 2023, 08:44:57 AM
Looking good..... :2vrolijk_21:


Do you have any upgrades to the front suspension?
Will do the front this summer.
Title: Re: What did you do to or on your CVO today?
Post by: acevtwin on February 07, 2023, 08:46:24 AM
I like the looks of the easy preload/sag adjustment.

Sent from my SM-N981U using Tapatalk
It came with a nice (plastic / non scratching) tool for adjusting.
Title: Re: What did you do to or on your CVO today?
Post by: TN on February 08, 2023, 06:33:54 AM
Will do the front this summer.

You doing Fox components in the front? 

__________________________________________________________________

Rode 350 miles yesterday, it was 35* when I left my house, was 68* when I got home. I brought back 8 boxes of Girl Scout cookies. Was a good day.

 :orange:
Title: Re: What did you do to or on your CVO today?
Post by: TN on February 11, 2023, 07:40:23 AM
Routine inspection.  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: TN on February 11, 2023, 02:16:53 PM
Doing top end checkup/maintenance , replacing breathers and lifters. Got to the second cylinder and there is an oddball lifter in my set. Note to thoroughly check all parts before starting. The one on the right is the oddball.

If this is bad as it gets I’m doing okay.  :drink:

Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on April 11, 2023, 06:41:27 AM
Picked the CVO Road Glide up from a friends house after we did a little repair work.  Bike seems to be running really good on the short 66 mile ride yesterday.  I have to run some errands today, so I will ride it again.
Title: Re: What did you do to or on your CVO today?
Post by: acevtwin on April 12, 2023, 08:20:51 AM
You doing Fox components in the front? 

__________________________________________________________________

Yes, It will be FOX in the front also.
Title: Re: What did you do to or on your CVO today?
Post by: TN on April 13, 2023, 08:42:57 PM
Recent project, Baker +1.5 two piece oil pan, Jagg filter adapter and oil cooler reinstall. I try to document all my work along with pictures for future reference.
Title: Re: What did you do to or on your CVO today?
Post by: Pan1 on April 13, 2023, 11:49:34 PM
I did not do anything on my CVO today> Having to work two jobs to pay for it and the extended warranty it needs!!!!!
Title: Re: What did you do to or on your CVO today?
Post by: TN on April 14, 2023, 09:33:04 AM
Side by side comparison.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on April 15, 2023, 06:44:35 AM
Yesterday, I washed the CVO road glide in preparation for todays Fallen Brother ride.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on April 16, 2023, 07:56:38 AM
I led my club on our annual fallen brother ride.  We visited five grave sites and rode 320 miles of great twisty roads.  Then we headed to the clubhouse for some burgers and dogs, and camaraderie.  The weather was perfect as were the brothers.  Bikes running like a top.
Title: Re: What did you do to or on your CVO today?
Post by: HOGMIKE on April 16, 2023, 10:16:49 AM
Put the CVO limited on the lift and covered it up for a few weeks.
It’s on “sleep mode” while I get the green bike out and put some break-in miles on it and change oil at 500 miles.

Got my softail back and will do a full service on that one and do some riding on that until the next long ride coming up!

 8)
Title: Re: What did you do to or on your CVO today?
Post by: acevtwin on April 17, 2023, 01:48:54 PM
I Retro fitted the 2012 CVO Softail Convertible Music system on to my wife's 2010.
Also added the Jenson weather proof tuner. A lot of work And money just to have the
"Factory look".  Hope it works out for her. The bike is pretty loud. Hope she can hear
the music.
Title: Re: What did you do to or on your CVO today?
Post by: acevtwin on April 17, 2023, 01:49:40 PM
I Retro fitted the 2012 CVO Softail Convertible Music system on to my wife's 2010.
Also added the Jenson weather proof tuner. A lot of work And money just to have the
"Factory look".  Hope it works out for her. The bike is pretty loud. Hope she can hear
the music.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on April 18, 2023, 07:07:36 AM
Nice work on the music for the Softail Convertible. 
Title: Re: What did you do to or on your CVO today?
Post by: TN on April 18, 2023, 07:15:59 AM
Wanted to update my lifter issue I reported in an earlier post. Notified the vendor of my issue with email and phone message about oddball lifter I received, I had a proper new one in my hand quickly, I realize things happen but how it’s handled after the fact is the most important thing, good customer service does exist after the sale, there was no questions or doubt from him. I’m gonna leave that where it is for now without mentioning the vendor by name, I wish he’d chime in but not sure he even visits this site.  I had forgotten all about the issue.  :2vrolijk_21: :2vrolijk_21:

I should have been more prompt in reporting the good customer service I experienced.

Carry on

______________________________________________________________________________


Decided it was time for me to review the owners manual that came with my CVO, I took delivery in 10-2008.
Title: Re: What did you do to or on your CVO today?
Post by: TN on April 20, 2023, 07:34:53 AM
Straightened out a bent rotor with a BFH  :drink:

I did the matching one also  :D

Title: Re: What did you do to or on your CVO today?
Post by: KGB on April 20, 2023, 12:47:46 PM
Wanted to update my lifter issue I reported in an earlier post. Notified the vendor of my issue with email and phone message about oddball lifter I received, I had a proper new one in my hand quickly, I realize things happen but how it’s handled after the fact is the most important thing, good customer service does exist after the sale, there was no questions or doubt from him. I’m gonna leave that where it is for now without mentioning the vendor by name, I wish he’d chime in but not sure he even visits this site.  I had forgotten all about the issue.  :2vrolijk_21: :2vrolijk_21:

I should have been more prompt in reporting the good customer service I experienced.

Carry on

______________________________________________________________________________


Decided it was time for me to review the owners manual that came with my CVO, I took delivery in 10-2008.
A lot of grease marks on that shop manual, but than again if I had mine down as far as you, mine would be that greasy!


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on April 21, 2023, 06:53:04 AM
I rode the CVO 110 miles.  Stopped on the ride to order two 2023 parts for my 21 Pan America, the catiletic converter heat shield and the air deflector, both of which are on the 23 but not the 21.
Title: Re: What did you do to or on your CVO today?
Post by: lyn.husen on April 21, 2023, 07:51:20 AM
I went out put some miles on it in the morning, the stopped BMW Cycles of Jacksonville to check on the progress of my 2023 K1600B 719 Edition that’s being built. Also trying to decide on whether I sell the CVO or keep it, hate to see it just sit around being ignored.


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on April 22, 2023, 12:05:09 AM
I went out put some miles on it in the morning, the stopped BMW Cycles of Jacksonville to check on the progress of my 2023 K1600B 719 Edition that’s being built. Also trying to decide on whether I sell the CVO or keep it, hate to see it just sit around being ignored.


Sent from my iPhone using Tapatalk
I also have a 23 K1600b GA and my CVO's. Totally different bikes and I ride all 3 about the same. Had a 19 K1600b GA that I traded on the 23 with 50K miles on it. All 3 great bikes!
Title: Re: What did you do to or on your CVO today?
Post by: lyn.husen on April 22, 2023, 09:25:15 AM
I also have a 23 K1600b GA and my CVO's. Totally different bikes and I ride all 3 about the same. Had a 19 K1600b GA that I traded on the 23 with 50K miles on it. All 3 great bikes!
I think I may just need a bigger garage. Will wait and see before I do anything stupid


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on April 23, 2023, 07:32:15 AM
I went out put some miles on it in the morning, the stopped BMW Cycles of Jacksonville to check on the progress of my 2023 K1600B 719 Edition that’s being built. Also trying to decide on whether I sell the CVO or keep it, hate to see it just sit around being ignored.


Sent from my iPhone using Tapatalk
You can never have to many motorcycles.  I have had two since 2009, and three since 2013.  Two get ridden a lot, one gets to shows and bike nights.
Title: Re: What did you do to or on your CVO today?
Post by: JCZ on April 23, 2023, 09:14:46 AM
I also have a 23 K1600b GA and my CVO's. Totally different bikes and I ride all 3 about the same. Had a 19 K1600b GA that I traded on the 23 with 50K miles on it. All 3 great bikes!

Us po boys live through you vicariously Alan!
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on April 24, 2023, 12:06:35 AM
Us po boys live through you vicariously Alan!
The BMW was your fault if you remember..
Title: Re: What did you do to or on your CVO today?
Post by: GKroadking on April 24, 2023, 04:44:28 AM
Changed the front fender and added the factory chopped front fender. Painted by a local painter.
Title: Re: What did you do to or on your CVO today?
Post by: GKroadking on April 24, 2023, 04:50:19 AM
I added a sissy bar and rode our chapter opening tour (250 mi) this weekend (Burg Harburg, in Bavaria)
Title: Re: What did you do to or on your CVO today?
Post by: 110Mofo on April 24, 2023, 08:01:58 AM
I added a sissy bar and rode our chapter opening tour (250 mi) this weekend (Burg Harburg, in Bavaria)

 There is nothing Sissy about that backrest.... :drink:
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on April 25, 2023, 08:06:11 AM
Took a ride down to White Lightning HD to watch my wife ride in with Adam Sandoval.  Put a nice 125 miles on the CVO.
Title: Re: What did you do to or on your CVO today?
Post by: GKroadking on April 25, 2023, 09:55:56 AM
There is nothing Sissy about that backrest.... :drink:
:lolk: In motorcyclist jargon, the sissy bar describes the (padded) backrest of the pillion seat of a motorcycle, which is sometimes found on choppers and cruisers. Literally translated, Sissybar means "sissy" or "sissy bar".  :2vrolijk_09:
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on April 26, 2023, 09:58:54 AM
Rode a round trip over to SMHD to meet up with my wife and Adam Sandoval again.  She got to lead part of his charity ride.
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on April 26, 2023, 11:47:56 PM
Thats really cool Dave. I am following him on his tour 👍👍Stuart.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on April 27, 2023, 08:48:56 AM
Washed the CVO yesterday between the rain showers, replaced a couple gaskets on the air cleaner assembly also.
Title: Re: What did you do to or on your CVO today?
Post by: HOGMIKE on May 02, 2023, 09:23:01 AM
Got back from a short road trip to AZ.
Just clicked over 70,000 miles on the odometer.
Just over 40,000 on the 124 kit and the bike is running just as fast as after the break in a few years ago!

Big thanks to all with help getting the right parts for the build and dyno tune, You know who you are! LOL


 :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: JCZ on May 02, 2023, 11:19:04 AM
Got back from a short road trip to AZ.
Just clicked over 70,000 miles on the odometer.
Just over 40,000 on the 124 kit and the bike is running just as fast as after the break in a few years ago!

Big thanks to all with help getting the right parts for the build and dyno tune, You know who you are! LOL


 :2vrolijk_21:

What year, make and model is that?

You got out of here just in time.......it's been in the mid to high 90's this past week, here in Tucson!
Title: Re: What did you do to or on your CVO today?
Post by: HOGMIKE on May 02, 2023, 02:20:31 PM
What year, make and model is that?

You got out of here just in time.......it's been in the mid to high 90's this past week, here in Tucson!

Sorry about that!
2019 cvo limited.

Left Yuma yesterday morning with beautiful weather half way to San Diego.
Then, hit high winds, overcast cool weather. San Diego had mid 60’s today and drizzle.
Quite the change from Sunday at 100+ In Yuma to today with mid 60’s in San Diego!
 8)
Title: Re: What did you do to or on your CVO today?
Post by: GKroadking on May 03, 2023, 05:18:01 AM
I added some lights to the fairing for better visibility   ;D
Title: Re: What did you do to or on your CVO today?
Post by: SCHIMCVO19 on May 11, 2023, 07:26:36 AM
Put USB power in my saddle bag:

Title: Re: What did you do to or on your CVO today?
Post by: SIKBIRD on May 11, 2023, 02:09:34 PM
Changed the inner cam bearings and cam chain tensioner shoes on my dad’s 03 RK a couple weeks ago…decided to go ahead and change mine before our upcoming trip so spent some time this morning ordering the Cyco shoes and buying all the O-rings and gaskets for the job.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on May 12, 2023, 07:58:19 PM
 New Galfers on the 15 along with their sintered pads. (https://uploads.tapatalk-cdn.com/20230512/df4b8dc8f1329266eb13fdd8699e9fdd.jpg)

Sent from my SM-N981U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on May 13, 2023, 06:54:20 AM
Nice looking new rotors.
Title: Re: What did you do to or on your CVO today?
Post by: Scott7d on May 23, 2023, 08:18:36 PM
Crossed 119,000 miles today on a nice long ride through southern Indiana. Still looks and cleans up great!

(https://i.ibb.co/C1QmBSG/odo.png)
Title: Re: What did you do to or on your CVO today?
Post by: SIKBIRD on May 24, 2023, 08:28:45 PM
Replaced my cam shoe tensioners, inner cam bearings, and all the O-rings and gaskets.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on May 24, 2023, 10:17:53 PM
Fixed my intermittent electrical issue that started an hour from the hotel last night. All gauges crapped out. I thought it was a charging problem and took the battery out and checked all the connections. They were good. A friend suggested to look at the connections in the gauge cluster. Unplugged the speedo/tach plug from the cluster and plugged it back in. Problem solved. Phew. Simple and free.

Sent from Tapatalk. probably while pooping.

Sent from my SM-N981U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: JCZ on May 24, 2023, 10:30:17 PM
Crossed 119,000 miles today on a nice long ride through southern Indiana. Still looks and cleans up great!

(https://i.ibb.co/C1QmBSG/odo.png)

That's impressive......what year is that?  What motor work have you done?
Title: Re: What did you do to or on your CVO today?
Post by: Scott7d on May 25, 2023, 05:31:17 AM
That's impressive......what year is that?  What motor work have you done?

Thanks. It's a 2020. Nothing has been done outside of the normal maintenance schedule. I stretch oil changes out a little further than most. Motor every 6000-7000 miles, then trans/primary every other service. Motor is fairly mild, stage II with the CR480 cam. Stock exhaust from a 2018 CVO with the cat removed and Fullsac baffles.

(https://i.ibb.co/hfzg69Z/bike30.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: HOGMIKE on June 06, 2023, 08:33:15 PM
Took the 124 m8 on a long trip to walker pass, kernville, San Diego, Yuma, then back home to SoCal.

72k miles on the bike, about 50k on the 124, about 30k on the baker trans.
Developed a small oil leak traced back to a clutch cover gasket that failed.
In the process of cutting a o-ring groove into the flat face and ditch the gasket!

Still amazed at the smooth power delivery and decent gas mileage. Best was 48mpg down to 34 mpg at speed and a strong head wind up the grades.

Thanks to all involved in the parts combo and sources.

Miles of smiles! LOL  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: DDCVO on June 07, 2023, 03:53:34 PM
Got it GYEONized today

https://www.cvoharley.com/smf/index.php?action=dlattach;topic=89705.0;attach=323429
Title: Re: What did you do to or on your CVO today?
Post by: OBB on June 07, 2023, 05:58:42 PM
Put a set of Clearwater Darlas on the '12.  Still need to put that damn fairing back on so no pix yet.

Sent from my SM-N981U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: Frank FX on June 08, 2023, 07:16:50 PM
Bought the new 23 CVO Roadglide in black and orange!!!!
Title: Re: What did you do to or on your CVO today?
Post by: Hondo2doc on June 08, 2023, 07:42:22 PM
Bought the new 23 CVO Roadglide in black and orange!!!!
Awesome congrats. Do you have a delivery date?

Sent from my SM-T500 using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: OBB on June 08, 2023, 07:56:53 PM
Bought the new 23 CVO Roadglide in black and orange!!!!
Very nice

Sent from my SM-N981U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: acevtwin on June 09, 2023, 08:40:32 AM
Bought the new 23 CVO Roadglide in black and orange!!!!
I'm waiting to see them in person, But it could happen! lol
Title: Re: What did you do to or on your CVO today?
Post by: HOGMIKE on June 09, 2023, 11:18:03 PM
Took a demo windshield from klockswerks out yesterday and tried a couple different sizes.

Liked it better than the HD version I’ve been running since 2017 that I bought it!

6*5” works for me in smoke color.

2019 cvo limited.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on June 17, 2023, 08:46:47 AM
I just took a short 55 mile ride to the dealer for a beer and cigar with a friend.  Then rode 55 miles home.
Title: Re: What did you do to or on your CVO today?
Post by: SCHIMCVO19 on July 05, 2023, 03:10:24 PM
She got about a 16 hr detail job !

Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on July 05, 2023, 08:00:22 PM
Rode the Road King to breakfast.  It made me happy.

Rode the FXR to lunch.  It made me happy.  But on the way home discovered the horn had died.  That made me unhappy.

Rode the Road Glide to dinner.  It made me happy.  Just got home.

Will wipe them all down this evening.  This will make me happy.

Will also put a new horn on the FXR.  This would make me very unhappy if putting in stock location (because that job sucks). 

Will mount horn elsewhere.  This will make me happy.

This is the way.
Title: Re: What did you do to or on your CVO today?
Post by: TN on July 09, 2023, 08:50:53 AM
Was a great ride this morning, headed out at the crack of dawn and first stop was at Broad river, I had some company and we both gave some space to one another. My new summertime FXRG jacket gets a five star rating but now I realize I need some summertime boots instead of my usual red wings, my dogs would like to breathe too. There is always some influence here to help you spend some monies. I’ve got one suggestion anyone else have any input for summer boots let me know please.


I hope everyone has a great day and enjoy whatever.   :orange:


Without pictures these comments don't count, so check your post count and adjust as needed.  :D
Title: Re: What did you do to or on your CVO today?
Post by: Joel on July 09, 2023, 10:08:29 AM
Yesterday I finished the cam bearings and lifter replacement on my bike, reused the pushrods for the experience of doing the job that way, and replace the breather related items in the rocker arm plates.
It started and got me back to my shop after the test ride, so I'm feeling good about this being my first time doing this type of work on a bike.
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on July 09, 2023, 10:30:48 AM
Was a great ride this morning, headed out at the crack of dawn and first stop was at Broad river, I had some company and we both gave some space to one another. My new summertime FXRG jacket gets a five star rating but now I realize I need some summertime boots instead of my usual red wings, my dogs would like to breathe too. There is always some influence here to help you spend some monies. I’ve got one suggestion anyone else have any input for summer boots let me know please.


I hope everyone has a great day and enjoy whatever.   :orange:


Without pictures these comments don't count, so check your post count and adjust as needed.  :D
I don't know why but crocodile/alligator boots come to mind. :nixweiss: :huepfenlol2:

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: TN on July 09, 2023, 12:07:26 PM
I don't know why but crocodile/alligator boots come to mind. :nixweiss: :huepfenlol2:

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:

That cracked me up Gary, I didn’t see it coming.  Now go take the cover off your bike and go for a ride.  ;D
Title: Re: What did you do to or on your CVO today?
Post by: OBB on July 09, 2023, 02:21:10 PM
That cracked me up Gary, I didn’t see it coming.  Now go take the cover off your bike and go for a ride.  ;D


Sent from my SM-N981U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on July 09, 2023, 08:08:57 PM
That cracked me up Gary, I didn’t see it coming.  Now go take the cover off your bike and go for a ride.  ;D
Believe it or not I actually did that this week. :shocked2: :2vrolijk_21:

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: TN on July 10, 2023, 07:26:28 AM
Believe it or not I actually did that this week. :shocked2: :2vrolijk_21:

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:

You got any evidence of this event?
Title: Re: What did you do to or on your CVO today?
Post by: Fired00d on July 10, 2023, 09:41:59 AM
You got any evidence of this event?
Only my word. It was the first ride in almost a year... I'll ride it at least one more time this month when I get the required state safety inspection. ;D

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Title: Re: What did you do to or on your CVO today?
Post by: TN on July 16, 2023, 08:26:24 AM
Took a ride this morning, cobblestone and history.  :orange:
Title: Re: What did you do to or on your CVO today?
Post by: TN on July 24, 2023, 06:46:45 AM
My Sunday morning ride took me down by the river. The ships are getting larger so the bridge is not high enough, enough cash will cure anything in this department.


Lets Ride!
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on July 28, 2023, 07:36:18 AM
Took the CVO on a 110 mile ride with my wife to our HOG chapter meeting. 
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on July 28, 2023, 10:43:08 AM
Miss Susan and I rode down to the Back of the Dragon Store for Bike Night.

Not many folks there considering it was such a beautiful evening. When we got off the bike I turned around and saw Steve Mitchell sitting at a table giving me the finger, which is our customary greeting. We had dinner there and talked with Steve then rode back home just before dark.

Nice evening
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on July 30, 2023, 08:22:20 PM
Today Miss Susan, Pam, Dwayne, Steve M and I rode down to Alderson WV to a little place called Stuart's. They have all you can eat shrimp on Sunday's and today they also had all you can eat crab legs.

All I will say is that Dwayne is a crab eating machine, our poor waitress wore out a pair of flip flops running back and forth bringing crab refills, and hauling the scraps to the trash. By the time we were done, her flops flopped out and her boobs flopped out, which ordinarily would not be a bad thing, but in this case was less than ideal.

We all ate too much, and couldn't even stand to enjoy a fresh ice cream once we returned to Princeton. But all in all we had a wonderful 150 mile ride on a beautiful Sunday.
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on July 31, 2023, 12:08:33 AM
Great name for a good restaurant. 😎. Stuart
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on July 31, 2023, 11:05:08 AM
LOL

Thought you might think so

The guy that owns the place, Stuart, looks like Sammy Hagar. Their motto is “Warm Beer, Cold Food and Ugly Women” and their hiring policies reflect that.
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on August 05, 2023, 06:44:48 PM
Dwayne, Pam, Steve, Francis, Susan and I rode down to Roanoke Valley HD today as I wanted to look at the new CVO Street Glide up close and personal. Even though it has the same frame I felt more cramped up sitting in it compared to my Road King. I really don’t care for the new tank or new rear lights, so I don’t see one in my future.

After the dealership we rode over to the Valley Grill for a delicious lunch. Then back home via a new route between Catawba and Blacksburg. It’s not a new road, just one I had never been on and specifically don't care to again, as it was pretty rough.

Once back to Princeton we stopped for ice cream capping off another beautiful 220 mile day.
Title: Re: What did you do to or on your CVO today?
Post by: 99 Blue flame on August 06, 2023, 12:08:57 PM
 Doubled the mileage on the FXR3 since I've owned it. 4,056 miles the first 22 years. Bought her May of 2021. Now just over 8,100 miles. New Andrews EV27 cam this spring and a joy to ride. I will die owning this bike.
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on August 06, 2023, 09:06:07 PM
Doubled the mileage on the FXR3 since I've owned it. 4,056 miles the first 22 years. Bought her May of 2021. Now just over 8,100 miles. New Andrews EV27 cam this spring and a joy to ride. I will die owning this bike.

I'm in much the same position.  Got my red FXR2 right at 5 years ago.  It had collected only about a 1000 miles in it's last 15 to 20 years.  Fortunately had always been garaged/stored decently well.  Came to me needing some maintenance but it wasn't too bad. 

In my five years with it I've almost doubled its mileage and it's got right at 30,000 now.  It's my favorite bike to ride unless it's summer vacation road trip type riding. 
Title: Re: What did you do to or on your CVO today?
Post by: TN on August 14, 2023, 06:41:14 AM
Took a ride Sunday, a lil warm and humid. Looking forward to an elevation change soon.


Title: Re: What did you do to or on your CVO today?
Post by: TN on August 18, 2023, 06:38:03 AM
Mounted a Dunlop AE on my spare wheel.
Title: Re: What did you do to or on your CVO today?
Post by: WTF Chuck on August 18, 2023, 09:58:25 AM
Installed rotors, TPS on the new front wheel. Balanced Mounted wheel  on the bike. Did quick 50 mile test run
Title: Re: What did you do to or on your CVO today?
Post by: GKroadking on August 21, 2023, 01:09:10 PM
added new Rotors from Galfer, painted red as the main color. (Sunset Orange)
Title: Re: What did you do to or on your CVO today?
Post by: TN on August 26, 2023, 03:52:38 PM
 Had some issues at several standoffs on my tour-pak rack, fix cost me $3 in parts, plus shop supplies. :drink:  I got the idea from a past member, he had silver quarters on his.

Does anyone know the member I mentioned above? (Bonus point question)

Title: Re: What did you do to or on your CVO today?
Post by: TN on August 30, 2023, 07:56:51 AM
Got some new parts for my CVO. Still able to buy new parts from HD for my 15 year old bike, which is a good thing. I’m a DIY’er and just recently upgraded myself to level II parts changer. This order was mainly brake system parts. I received the order quickly using Harleys e commerce site, got a $20 gift card to use at my local dealer by the end of Sept too, my how times have changed. The order amounted to a mere $731, I got free shipping.  :apple:


Title: Re: What did you do to or on your CVO today?
Post by: TN on September 04, 2023, 07:20:04 AM
Annual service on jiffy stand.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on September 14, 2023, 08:40:06 AM
I have rode my 2023 Whiskey Neat CVO road glide every day this week.  Fixing to hop on it and Ride to UT Orthopedics to have them look at MRI of my hip.  Its a 58 mile ride each way.   
Title: Re: What did you do to or on your CVO today?
Post by: MC16LTD on September 14, 2023, 07:13:39 PM
Thelma hit 25k miles so thought from comments at shop and forums that tappets should be replaced.  Took her over to Roger Lockwood and had him replace the tappets and pushrods. S&S tappets and Quickee pushrod kit.  Sounds good and now won't worry about a grenade between my legs for a while.
Title: Re: What did you do to or on your CVO today?
Post by: motor1 on September 15, 2023, 07:09:17 AM
Changed the headlight on my road glide and went for a night ride. The difference is absolutely amazing! The Hogworkz headlamp illuminates the road much better than the stock light and improves the look of the bike.
Title: Re: What did you do to or on your CVO today?
Post by: motor1 on September 15, 2023, 07:12:51 AM
How the headlight looks.
Title: Re: What did you do to or on your CVO today?
Post by: longlast on September 18, 2023, 06:09:09 AM
Motor overhaul completion  :2vrolijk_21:

Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on September 21, 2023, 08:33:58 AM
Took the 23 CVO RG out for a ride to physical therapy.  Then over to the SHED to have a cigar.  Then to Yamaha to order a new Jet Ski cover.  All in all just over 150 miles on a beautiful day.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on September 23, 2023, 08:30:06 AM
I put TAB B.A.M. 4.5" mufflers with Zombie baffles on the bike.  Then decided to ride the Foothills Parkway, such a nice relaxing ride.  Mufflers sound good.

Title: Re: What did you do to or on your CVO today?
Post by: Hondo2doc on September 23, 2023, 09:32:10 AM
I put TAB B.A.M. 4.5" mufflers with Zombie baffles on the bike.  Then decided to ride the Foothills Parkway, such a nice relaxing ride.  Mufflers sound good.
Wow the bike looks freaking awesome!!! I'm surprised no fullsac on this one? Dave have you given any thoughts to motor work?

Sent from my SM-T500 using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on September 23, 2023, 02:05:10 PM
Better stay out of that motor for a while. I remember some of your last woes Dave.  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: HOGMIKE on September 23, 2023, 05:58:25 PM
Better stay out of that motor for a while. I remember some of your last woes Dave.  :2vrolijk_21:

🤣
😬

Like the rest of us…..can’t leave anything stock!
LOL
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on September 24, 2023, 07:49:50 AM
Wow the bike looks freaking awesome!!! I'm surprised no fullsac on this one? Dave have you given any thoughts to motor work?

Sent from my SM-T500 using Tapatalk
The baffles are welded in, the complete circumference of the baffle.  Steve said there is no way to grind it out with out damaging the muffler.  He is going to see if he can make a tool to maybe get it out.

There is nothing available for this motor yet.  Heads and intake are redesigned.  Fueling is starting to tinker with stuff for it.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on September 24, 2023, 07:52:52 AM
Yesterday was a beautiful day, mid 70's most of it.  I took a 229 mile round trip ride to Veterans Overlook, one way there a different way home great ride.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on September 24, 2023, 07:54:35 AM
Pictures do not do the view from Veterans Overlook justice.

Title: Re: What did you do to or on your CVO today?
Post by: TN on September 24, 2023, 10:49:13 AM
Perfect morning for a ride.   :orange:
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on September 25, 2023, 08:05:09 AM
Just a couple short rides yesterday, 21 miles over to AmVets Post for the AmVet Riders meeting.  Then a 7 mile ride to the Marina for a Sunday get together with neighbors for a few beers.

This past week has been perfect riding weather
Title: Re: What did you do to or on your CVO today?
Post by: TN on September 27, 2023, 07:06:45 AM
Without the topbox the bike is much more nimble.   :bananarock:
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on September 27, 2023, 07:11:15 AM
Ended up riding 179 miles yesterday.  Perfect weather.

Amazing how much difference the top box makes on handling.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on September 27, 2023, 12:09:44 PM
Without the topbox the bike is much more nimble.   :bananarock:
One of the reasons I have two Sharks now.  ;D

Sent from my SM-N981U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: Mr D on September 27, 2023, 10:10:41 PM
Without the topbox the bike is much more nimble.   :bananarock:

King or chopped ?
Title: Re: What did you do to or on your CVO today?
Post by: TN on September 28, 2023, 06:36:19 AM
King or chopped ?

I have both, I usually run the king in the two up position and put the chopped on in solo position. I’m use to the top heavy feel but it still surprises me when I ride without one.


Replaced rear caliper, a lil more bleeding and it'll be good as new.
Title: Re: What did you do to or on your CVO today?
Post by: TN on October 02, 2023, 07:50:07 AM
Been trying out muffler combinations this year. Started out with 2.25” in both, ran 2” in both for some time, right now I have 1.75” in left side 2” in right side.  I’ve tried most other combinations too.

Title: Re: What did you do to or on your CVO today?
Post by: JoeVibe on October 02, 2023, 09:08:58 AM
Been trying out muffler combinations this year. Started out with 2.25” in both, ran 2” in both for some time, right now I have 1.75” in left side 2” in right side.  I’ve tried most other combinations too.

So, what are your results/opinions? This sounds interesting to me!
Title: Re: What did you do to or on your CVO today?
Post by: TN on October 03, 2023, 06:37:42 AM
So, what are your results/opinions? This sounds interesting to me!

I’m doing this because of the sound Joe, I was getting a drone with my modular and the 2.25”baffles, helped with the 2” but still got t. This combination may work for me.
Title: Re: What did you do to or on your CVO today?
Post by: JoeVibe on October 03, 2023, 07:55:03 AM
I’m doing this because of the sound Joe, I was getting a drone with my modular and the 2.25”baffles, helped with the 2” but still got t. This combination may work for me.

 :2vrolijk_21:  :drink:
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on October 03, 2023, 07:57:05 AM
Rode over to Marryville and Smoky Mountain Bike Week.  Perfect day for a ride.  They have guided rides Monday, Tuesday and Wednesday.  They have a band every night through Saturday.  Vendors at the dealership.  Wednesday night they have downtown Marryville night club area blocked off for bike parking on the street.  Harley Demo rides Thrusday thru Saturday. 
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on October 05, 2023, 07:34:35 AM
Been riding over each day this week for Smoky Mountain Bike Week.  I'll ride over later today again.  Weather has been perfect.
Title: Re: What did you do to or on your CVO today?
Post by: Mr D on October 06, 2023, 04:34:48 PM
Been riding over each day this week for Smoky Mountain Bike Week.  I'll ride over later today again.  Weather has been perfect.

Dave,

How ya been enjoying the new gen CVO
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on October 08, 2023, 09:25:50 AM
Dave,

How ya been enjoying the new gen CVO
I have just over 3200 miles on it.  I really like it.  The motor has a very wide torque curve which is mostly flat.  I feel the front suspension is better, and front brakes are much better, rear suspension is an improvement, not a significant as Harley claims.  Wind management is better.  I like the shape of the tank and bags.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on October 08, 2023, 09:27:49 AM
Washed it.  Then I installed the Extreme Heavy Breather.  I also installed the Gremlin Bell my wife's niece gave me.

Title: Re: What did you do to or on your CVO today?
Post by: Hondo2doc on October 09, 2023, 07:02:03 AM
Washed it.  Then I installed the Extreme Heavy Breather.  I also installed the Gremlin Bell my wife's niece gave me.
Dave, love the look of that extreme breather.

Do you have to have ecm flashed for the extreme breather? Also does Harley have a rain sock for it?

I ordered the extreme breather for my 2021(it's a little different from yours) suppose to get it today. Been looking for a rain sock.

I currently have the elite breather and got caught in a nightmare rain storm a few days ago here in south Florida didn't have my rain sock with me and by fluke luck kept the bike from stalling with my leg over the breather.

Sent from my SM-T500 using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: TN on October 09, 2023, 08:08:20 AM
Replaced 6 pin plug at TCA,. this has been an issue for the early TBW bikes.

.......I was asked some detail about my fix here. I bought a prewired plug on eBay and chose this way because the wires were stretched and suspect at the plug so I needed to add length. The prewired plug came with matched wire colors, it made it easier and there was going to be solder joints anyway I went.
Title: Re: What did you do to or on your CVO today?
Post by: Mr D on October 09, 2023, 09:06:30 PM
Washed it.  Then I installed the Extreme Heavy Breather.  I also installed the Gremlin Bell my wife's niece gave me.

Nice touch on the Extreme HB  :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on October 11, 2023, 10:51:53 AM
Dave, love the look of that extreme breather.

Do you have to have ecm flashed for the extreme breather? Also does Harley have a rain sock for it?

I ordered the extreme breather for my 2021(it's a little different from yours) suppose to get it today. Been looking for a rain sock.

I currently have the elite breather and got caught in a nightmare rain storm a few days ago here in south Florida didn't have my rain sock with me and by fluke luck kept the bike from stalling with my leg over the breather.

Sent from my SM-T500 using Tapatalk

Harley says you have to Tune.  The bike already had a high flow filter.  Most on Facebook group are not tuning.  I have tuned and its running good.  The heavy Breather came with a rain sock.
Title: Re: What did you do to or on your CVO today?
Post by: Hondo2doc on October 11, 2023, 10:58:57 AM
Harley says you have to Tune.  The bike already had a high flow filter.  Most on Facebook group are not tuning.  I have tuned and its running good.  The heavy Breather came with a rain sock.
Thank you Dave.

Sent from my SM-T500 using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on October 11, 2023, 10:59:35 AM
I took a nice 175 mile ride yesterday afternoon as it was a perfect day out.  Took back roads to North of Harriman, then US 27 north to Just above Wartburg where I to 62 west to Clark Range, then  US 127 south to Pikeville, then 30 East to back roads home.  Great hilly, twisty roads.

TN that sure looks like a good fix.

Mr. D thank you.
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on October 11, 2023, 08:58:32 PM
Dave. How are you liking the whiskey neat??
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on October 12, 2023, 07:16:43 AM
Dave. How are you liking the whiskey neat??
I am really liking the Whiskey Neat.  Gunslinger did a very good job with this paint job.  The whiskey color really pops in the sun.  The VVT motor is very nice, very broad torque curve.  The front suspension is a noticeable improvement, front brakes have more stopping power.  Rear suspension is a slight improvement.  The new Road Glide fairing has improved wind management once you replace the joke of a windshield Harley puts on it. I like the new tank design and the new bag shape.  Harley claims they hold more, I'll see on my first trip.

The new Infotainment Control Unit (IFCU) is very nice.  You can choose three different gauge layouts.  You can do everything with the new hand controls. I also like you can she what gear your are in at all time even with clutch in.

I absolutely hate the Kickstand down safety switch down alarm. It kills the bike if you shift into gear stand down, you cant start the bike stand down.  If it momentairly looses connection it kills the motor.
Title: Re: What did you do to or on your CVO today?
Post by: GKroadking on October 12, 2023, 09:05:52 AM

I absolutely hate the Kickstand down safety switch down alarm. It kills the bike if you shift into gear stand down, you cant start the bike stand down.  If it momentairly looses connection it kills the motor.

We have had this "safety feature" in Germany for many years and is mandatory for technical approval for the motorcycle.

I'm glad you're so happy with the new CVO. Have fun with it.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on October 21, 2023, 07:25:02 AM
I installed a Riders Backrest, from Bad Boyz Cyclez.  Workmanship seems very nice.  If I had a passenger it will fold forward on to rider seat.  It has height adjustment and angle adjustment for the pad.  Right now its at lowest point.  I think that's going to be right for me.  Hope to ride today to test.  If I need lower I'll simply take 1.5 inches off the bottom of the flat bar that goes in mount.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on October 21, 2023, 03:43:39 PM
I installed a Riders Backrest, from Bad Boyz Cyclez.  Workmanship seems very nice.  If I had a passenger it will fold forward on to rider seat.  It has height adjustment and angle adjustment for the pad.  Right now its at lowest point.  I think that's going to be right for me.  Hope to ride today to test.  If I need lower I'll simply take 1.5 inches off the bottom of the flat bar that goes in mount.
Nice to see they're making them with more adjustments. I have one of theirs in my '12 and really like it. I had my buddy modify the bracket to go back further though as it was too far forward for my liking.

Sent from my SM-N981U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on October 22, 2023, 07:01:17 AM
Nice to see they're making them with more adjustments. I have one of theirs in my '12 and really like it. I had my buddy modify the bracket to go back further though as it was too far forward for my liking.

Sent from my SM-N981U using Tapatalk
I had that bracket on my 17, 18 and 19.  This is sturdier and better made.

Took a 98 mile ride yesterday.  I need to adjust the pad forward 1/4 to /1/2 inch I think  Set screw may be an issue.  It was as tight as a dare get it, bending allen wrench.  When I got home it was loose.  I may also want it a little lower than it is. 
Title: Re: What did you do to or on your CVO today?
Post by: GKroadking on October 23, 2023, 07:37:21 AM
I had my Mustang seat changed by a local saddler.
Gel cushion, better rain protection and improvements in the padding. Seams are finished in red to match the paintwork.
Title: Re: What did you do to or on your CVO today?
Post by: GKroadking on October 23, 2023, 07:38:14 AM
one more...
Title: Re: What did you do to or on your CVO today?
Post by: GKroadking on October 23, 2023, 07:38:54 AM
last one  ;D
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on October 24, 2023, 08:17:34 AM
GKroadking, that seat looks really good.  I always liked the paint job on your bike and the seat complements it.

I took a 158 mile ride yesterday, over to SMHD to have a cigar with a friend, then over to the Foothills park way, than along 129 and the little TN river to home.  Beautiful day, 72 degrees except on top of the Foothills where it was 63.  Fall colors were great on the Foothills.
Title: Re: What did you do to or on your CVO today?
Post by: GKroadking on October 25, 2023, 04:28:15 AM
GKroadking, that seat looks really good.  I always liked the paint job on your bike and the seat complements it.

I took a 158 mile ride yesterday, over to SMHD to have a cigar with a friend, then over to the Foothills park way, than along 129 and the little TN river to home.  Beautiful day, 72 degrees except on top of the Foothills where it was 63.  Fall colors were great on the Foothills.

Thanks Dave for the compliment and thanks for your nice comment. I appreciate that.
Your new CVO looks great and I'm pleased that you're happy with the new bike. Ride safe.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on October 25, 2023, 08:17:42 AM
Had a nice ride yesterday.  Rode down to Cleveland, the Tennessee State Veterans home were we met up with some other AmVets.  We ran bingo with prizes for the Resident Veterans.   The Resident Veterans had a blast.  Afterwards I continued riding to enjoy the beautiful and and fall colors, 190 mile day.
Title: Re: What did you do to or on your CVO today?
Post by: Hondo2doc on October 25, 2023, 09:47:06 AM
Had a nice ride yesterday.  Rode down to Cleveland, the Tennessee State Veterans home were we met up with some other AmVets.  We ran bingo with prizes for the Resident Veterans.   The Resident Veterans had a blast.  Afterwards I continued riding to enjoy the beautiful and and fall colors, 190 mile day.
Dave, it's fantastic that you're enjoying that new scooter so much. But from reading on here you thoroughly enjoy a performance bike. So I'm curious as hell, does that 121 ci have enough balls? Or are you itching for more?

Sent from my SM-T500 using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on October 26, 2023, 08:51:26 AM
Dave, it's fantastic that you're enjoying that new scooter so much. But from reading on here you thoroughly enjoy a performance bike. So I'm curious as hell, does that 121 ci have enough balls? Or are you itching for more?

Sent from my SM-T500 using Tapatalk
I really do like a well built bike, my 13 CVO King and My 19  CVO Road Glide were a blast to ride.  Both bikes were built for broad torque curves.

This bike has a very broad torque curve. So it has good torque most the RPM range once it comes up.  The bike feels like it has more power than it does.  The fact that this VVT is new to Harley I am not anxious to void the warranty.  I would expect Harley will have some Stage kits for it soon.  A 135 Kit seems like a no brainer as this engine shares the same crank as the 135"  So the cylinders and pistons already exist. 

Did nice 147 mile ride yesterday on my way to physical therapy.  Fall colors are great, so is 75 degrees and no humidity.

Title: Re: What did you do to or on your CVO today?
Post by: tlr on October 26, 2023, 04:40:19 PM


I absolutely hate the Kickstand down safety switch down alarm. It kills the bike if you shift into gear stand down, you cant start the bike stand down.  If it momentairly looses connection it kills the motor.
[/quote]

Soundz just came out with a bypass harness for the kickstand issue. $50.
Title: Re: What did you do to or on your CVO today?
Post by: motor1 on October 26, 2023, 05:13:08 PM
Standard on police Harley’s for years. A dab of silicone and a washer to fool the bike. Works like a charm.
Title: Re: What did you do to or on your CVO today?
Post by: tazmun on October 26, 2023, 06:07:30 PM
I've been a Road Captain for many years and you wouldn't believe how many people leave their kickstand down while taking off in group rides!
The worst thing is some forget their NOT in neutral and start their bike even before they get on! Metric bikes have had that for many years!
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on October 27, 2023, 08:16:18 AM
I absolutely hate the Kickstand down safety switch.  Reason is that if the switch has a failure it kills the engine.  Poor design in my opinion.  50 bucks is pretty high for a simple jumper.

Yesterday lunch time rode to cycle gear to get a new pin lock for my helmet.  Then late afternoon rode over to SMHD for the Dragon Chapter HOG meeting.  Nice 212 mile day.  Been loving our great weather this week.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on October 28, 2023, 07:04:16 AM
I mad minor adjustments to the backrest, its almost perfect now.  Then to a 237 mile ride enjoying the great weather and fall colors.  Colors on the Cherohala Skyway were great.

Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on October 28, 2023, 07:05:13 AM
One more

Title: Re: What did you do to or on your CVO today?
Post by: GKroadking on October 28, 2023, 08:36:49 AM
I absolutely hate the Kickstand down safety switch.  Reason is that if the switch has a failure it kills the engine.  Poor design in my opinion.  50 bucks is pretty high for a simple jumper.

We have had this “feature” for many years. You get used to it... and the switch has never been broken on any of my motorcycles.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on October 29, 2023, 09:06:05 AM
We have had this “feature” for many years. You get used to it... and the switch has never been broken on any of my motorcycles.

It's strange my 2021 Pan America has this same switch, and its never once bugged me.  Yet it bugs the hell out of me on my CVO Road Glide.

Did a nice 108 mile ride yesterday morning, also picked up new drain plugs and stabil for the boat while on the ride.  Came home, took the boat for the last ride of the season, spent 3 hours on it, added stabil and filler her up. Safe on the lift, and will winterize soon.
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on October 29, 2023, 01:28:21 PM
Took a nice 240 mile ride yesterday through southern WV. It was warm day so I decided to run down to Mountain State HD to get a first hand look at a some new iron including a CVO Road Glide.

The ol Road King looks even better after seeing what they had to offer.

Some time ago, just before MV, I changed baffles in my mufflers from Fulsac 2.0 to 2.25. I liked the sound but felt I lost a little low end torque particularly when doubling. I decided to put the 2.0 back in, but before I did, I cut the very end of each baffle off about 1 1/2 inches. My logic being that it might change the sound having the baffle end while still shrouded by the endcap. It has worked like a charm, the bike sounds a bit meaner or more aggressive, and I got my torque back.

While doing all of this, the rubber grommet that holds the muffler on the left side was found to be loose in the metal loop it fits in. The grommet doesn't really show much wear, but it was loose fitting enough that the muffler could move around a little more than the right side. Some black  tape wrapped around the grommet until it fit tight has worked well,until a new grommet comes in. I had noticed a little vibration that is now gone after tightening the muffler connection up.

I've owned this machine since new and after 43,000 miles it rides and runs better than it ever has. I have absolutely no desire to ever get rid of it.

Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on October 29, 2023, 09:29:41 PM
Traded in the 16 rg limited today. Couldn't let Dave have all the fun. 😎
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on October 30, 2023, 12:22:28 AM
Traded in the 16 rg limited today. Couldn't let Dave have all the fun. 😎
congrats Stu, let the fun begin and make sure you post it all!!
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on October 30, 2023, 08:04:01 AM
Traded in the 16 rg limited today. Couldn't let Dave have all the fun. 😎

congrats Stu, let the fun begin and make sure you post it all!!
Enjoy the new bike Stuart.
congrats Stu, let the fun begin and make sure you post it all!!

Rode to Church then to go help at AmVets turkey shoot and then home, 104 miles.
Title: Re: What did you do to or on your CVO today?
Post by: Boatman on October 30, 2023, 09:50:29 AM
congrats Stu, let the fun begin and make sure you post it all!!

Agree.  Congratulations on the new bikes Stu and Dave!
Title: Re: What did you do to or on your CVO today?
Post by: HOGMIKE on October 30, 2023, 04:12:57 PM
Started out this morning on a multi day trip to AZ….didn’t happen!

Leaving Dago with calm breezes it started to get windy over the passes towards Yuma.
I called ahead to my friend and she said blowing sand there! I’ve ridden in those conditions before but I’m not taking my new bike out to get sand blasted!
I’ll try again this Saturday.
 :smilie_daumenneg:
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on October 30, 2023, 08:05:44 PM
I spoke to bad boyz cycles today.  The seat needs something.  He sent me this and adds jell and can push me back a little. Zoom in.
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on October 30, 2023, 08:07:49 PM
His work looks great.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on October 31, 2023, 07:44:59 AM
I really like the back rest he did for me.  The stitching really matches the bike.  Looks good and makes CVO seat look plain.  I am now considering having him add gell and recover the seat with his stitching.  I don't think I want changes to the seat, as I feel like I'm in a good position.

Title: Re: What did you do to or on your CVO today?
Post by: acevtwin on October 31, 2023, 09:44:48 AM
Got them both cleaned up and covered until Daytona Beach Bike week in March.
All done riding in Michigan for the season.
Title: Re: What did you do to or on your CVO today?
Post by: MC16LTD on November 02, 2023, 10:29:09 PM
Was a busy month,

Took a ride out to Hell's Canyon in Oregon to visit the brother and then out to Yellowstone to ride with the buffalo.

Got home and had Roger Lockwood at #1 Cycles and Machines replace out the lifters and pushrods with new S&S parts.

Followed that up with a Tour Pak quick detach kit, it cost almost $1000 by the time I was done, and I already had the turn signals for the bags.   Bought the HD dock and Tour-Pak bracket since I don't trust the wife's life to chinesium.  Had to relocate license plate, which needed a new tail light so license plate light was on bottom, new seat, and a passenger backrest/rack when riding SG style.   I really like it though and the bike rides way different without the Pak weight.   Also earlier this month

Once I got everything done took an 800 mile ride to Sedona, Monument Valley and Grand Canyon.
Title: Re: What did you do to or on your CVO today?
Post by: MC16LTD on November 02, 2023, 10:33:54 PM
Tour Pak removed
Title: Re: What did you do to or on your CVO today?
Post by: MC16LTD on November 02, 2023, 10:37:35 PM
Monument Valley UT
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on November 04, 2023, 08:22:53 AM
A few days ago I hit a very bad bump.  Handle bars moved a little bit.  Pushed them as far forward as possible with out removing the pin.  Then I tightened them.  Then I tightened them some more, hopefully they will not move again.  I also to a nice little 116 mile ride. 
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on November 04, 2023, 11:44:05 PM
I (intentionally) push my bars forward as much as they could go.  Didn't remove the pin. So easy to do on this bike, it's right there. Stuart.
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on November 05, 2023, 07:07:47 PM
No seat on the new bike for a week or so. Took the mako for a nice 150mile ride today toward Lake Okeechobee. Beautiful day too 👍👍👌😎 Stuart.
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on November 05, 2023, 08:29:42 PM
70 + degrees in Missouri in November.  Sunny day on top of that so took advantage.  FXR got 100 miles on a dawn breakfast ride then got washed and wiped down.  Road Glide got about 125 miles on a really nice afternoon ride followed by its own wash and wipe down.  Should then lie and say the Road King got an evening ride to finish the day.  But it didn't.  Still a good day.  Hope everyone else enjoyed theirs as much or more.  :drink:
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on November 06, 2023, 07:39:17 AM
72 degrees here in East TN, road to church, then road to help with AmVets turkey shoot to raise money for Christmas food baskets.  Then road to marina for a couple beers with friends.  Hate the time change, usually daylight leaving marina, but no, dark yesterday. Nice 98 mile ride.  Need to move the service up on my bike, its scheduled for the 17th but I went over 5K yesterday.
Title: Re: What did you do to or on your CVO today?
Post by: Hondo2doc on November 06, 2023, 09:16:46 PM
Saturday I rode up to Crackers Cafe in Indian Town. A little mom and pop breakfast joint. Around 200 miles round trip. I was trying to connect with the local HOG group and go to the Arcadia bike fest but I missed them some how.

Anyway ended up swinging by Palm Beach Harley and they had a whiskey neat SG and RG on the floor along with 2 Platinum SG's. Don't know and didn't see any prices.

Finally finally finally our south Florida weather has turned for the good. Low 70's or upper 60's in the morning with very little humidity. Next to no rain to speak of. Been waiting all year for this weather.

Gotta get my 25k service scheduled ASAP too.

Sent from my SM-G991B using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on November 07, 2023, 07:32:23 AM
68 mile ride yesterday to the Bank, then two stores trying to find a USB-C flash drive.  Neither one had one, and I need one to update the Amplifier software on the bike.  I'll have to go into Knoxville and Best buy to get one I guess.

Trying to get my 5K service and recall appointment moved up.  Its the 17th but I'm over 5100 now.
Title: Re: What did you do to or on your CVO today?
Post by: KGB on November 07, 2023, 10:49:31 AM
68 mile ride yesterday to the Bank, then two stores trying to find a USB-C flash drive.  Neither one had one, and I need one to update the Amplifier software on the bike.  I'll have to go into Knoxville and Best buy to get one I guess.

Trying to get my 5K service and recall appointment moved up.  Its the 17th but I'm over 5100 now.

https://www.amazon.com/SanDisk-128GB-Ultra-Type-C-Flash/dp/B081DF9HPL/ref=sr_1_5?crid=3QHFE6MQOVE8X&keywords=USB-C%2Bflash%2Bdrive&qid=1699372084&sprefix=usb-c%2Bflash%2Bdrive%2Caps%2C255&sr=8-5&th=1
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on November 10, 2023, 07:42:57 AM
Picked up a cable to go from USB to USB-C for 9 dollars at Best buy.  Updated the amplifier software yesterday.  Rode 87 miles yesterday testing the update.  Its suppose to fix the AVC and the amp cutting out for a couple seconds and some other things.  Amp did not cut out on short ride, Automatic Volume Control seemed fine. 
Title: Re: What did you do to or on your CVO today?
Post by: HOGMIKE on November 10, 2023, 03:43:23 PM
Picked up a cable to go from USB to USB-C for 9 dollars at Best buy.  Updated the amplifier software yesterday.  Rode 87 miles yesterday testing the update.  Its suppose to fix the AVC and the amp cutting out for a couple seconds and some other things.  Amp did not cut out on short ride, Automatic Volume Control seemed fine.


Dave:

The AVC through the speakers right? Not using the headset for the helmet?


I looked into the cvo street glide yesterday and other than the fancy display and a few suspension upgrades there’s just not enough to make the switch for me.

I just got back from a 5 day trip through AZ and after my long upgrade to my 2019 cvo, I’m still amazed how hard it pulls in overdrive!
Averaging 41-48 mpg at mostly normal speeds , high winds, 7000’ to -212 below sea level. The bike ran like a Swiss watch.
Coming up on 60k for the big motor and about 50 k on the grudge box. Everything working fine.

Next step is to service the front forks and maybe upgrade those as well since I got them off, still debating!

It’s coming on fall here, time to start making plans for more local trips around the Southwest.  8)

 
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on November 11, 2023, 08:28:09 AM

Dave:

The AVC through the speakers right? Not using the headset for the helmet?


I looked into the cvo street glide yesterday and other than the fancy display and a few suspension upgrades there’s just not enough to make the switch for me.

I just got back from a 5 day trip through AZ and after my long upgrade to my 2019 cvo, I’m still amazed how hard it pulls in overdrive!
Averaging 41-48 mpg at mostly normal speeds , high winds, 7000’ to -212 below sea level. The bike ran like a Swiss watch.
Coming up on 60k for the big motor and about 50 k on the grudge box. Everything working fine.

Next step is to service the front forks and maybe upgrade those as well since I got them off, still debating!

It’s coming on fall here, time to start making plans for more local trips around the Southwest.  8)

The new bike with the HD branded Sena 50S AVC works for bike speakers and helmet speaker.  What shocked me, was even play music though bike speakers, if you turn the wheel on the Sena the volume goes up.  If playing though helmet speaker wheel on Sena or bike volume turn it up.

Rainy day yesterday, so no ride.  Did get the heated gear plug out from under seat. Barley enough slack in cord to get it out from under seat.

Was going to Change chain and sprockets on Pan America Special.  No master link in Chain.  To remove chain you have to remove center stand, chain guards, rear fender.  Thought it would be a simple task as it's a basic maintenance item.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on November 14, 2023, 07:25:48 AM
Had the 5K service performed at SMH-D yesterday with 5565 miles on the bike. They also did a BCM update which has only been out a week.  Was a chilly 43 degree ride over, but a beautiful 68 degree ride home.
Title: Re: What did you do to or on your CVO today?
Post by: Hondo2doc on November 14, 2023, 07:29:29 AM
Had the 5K service performed at SMH-D yesterday with 5565 miles on the bike. They also did a BCM update which has only been out a week.  Was a chilly 43 degree ride over, but a beautiful 68 degree ride home.
5565 miles on that brand new bike......now that's what I'm talking about. You didn't buy that scooter to admire in the garage........you bought it to ride it like you stole it. Good for you!!!!

Sent from my SM-T500 using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on November 14, 2023, 10:29:40 PM
Absolutely 👍👍👍
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on November 17, 2023, 09:42:00 AM
Yesterday was a beautiful sunny 74 degree day in East TN.  So I took a nice 101 mile ride.  We have had a great November so far, unseasonably warm and dry.
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on November 17, 2023, 05:49:03 PM
My modified seat from Bad Boyz Cycles arrives tomorrow . I can't wait 😎😎👍Stuart 👍😁
Title: Re: What did you do to or on your CVO today?
Post by: SIKBIRD on November 17, 2023, 08:22:35 PM
Took my outer fairing off to diagnose my stereo problem.  My diagnoses is: it’s toast!  Gotta do some research this weekend and order a new one🤦🏼‍♂️
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on November 18, 2023, 09:01:45 AM
My modified seat from Bad Boyz Cycles arrives tomorrow . I can't wait 😎😎👍Stuart 👍😁

I cant wait to see it, and then to hear your review.
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on November 19, 2023, 05:08:23 PM
My modified seat and back rest arrived today from Bad Boyz Cyclez. Came out even better than I was hoping. Looks amazing and so much better to ride.  George hit it out of the park on this one. I would truly recommend this option for anyone with a new cvo rg or sg.
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on November 19, 2023, 05:12:05 PM
Another
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on November 19, 2023, 05:13:48 PM
One more.  Night and day difference from the way it came.
Title: Re: What did you do to or on your CVO today?
Post by: Twolanerider on November 19, 2023, 05:23:58 PM
^^^^^ very sharp ^^^^^
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on November 19, 2023, 06:40:21 PM
👍. Thanks.
Title: Re: What did you do to or on your CVO today?
Post by: Hondo2doc on November 19, 2023, 09:26:51 PM
Very very nice!

Sent from my SM-G991B using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on November 20, 2023, 02:02:01 AM
My modified seat and back rest arrived today from Bad Boyz Cyclez. Came out even better than I was hoping. Looks amazing and so much better to ride.  George hit it out of the park on this one. I would truly recommend this option for anyone with a new cvo rg or sg.
Looks great Stu, enjoy it!
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on November 20, 2023, 06:40:49 AM
One more.  Night and day difference from the way it came.
That is very sharp.  I love the back rest and have it on mine.  After your review, I am going to have to figure out when I can send him my seat.

Yours really does look great.
Title: Re: What did you do to or on your CVO today?
Post by: acevtwin on November 20, 2023, 09:05:27 AM
My modified seat and back rest arrived today from Bad Boyz Cyclez. Came out even better than I was hoping. Looks amazing and so much better to ride.  George hit it out of the park on this one. I would truly recommend this option for anyone with a new cvo rg or sg.
I have a Bad Boyz Cyclez seat on my 2022, but it is a complete new seat. (And I absolutely Love it)
What did they do to yours besides the obvious stitching? Gel added?
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on November 20, 2023, 06:06:53 PM
Yes. Added gel. More quality foam.  And pushed me back an inch.  At this stage of the game, an inch is a big deal 😎😎😎😁😎Stuart
Title: Re: What did you do to or on your CVO today?
Post by: 09nessrg on November 20, 2023, 10:05:56 PM
Nice looking seat, does it have heat? if not do you happen to know if they can add?
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on November 20, 2023, 11:28:08 PM
No heat on this one. Im in FL.  Don't need heat. You can call them and ask. I would think he can do it. 
Title: Re: What did you do to or on your CVO today?
Post by: DCFIREMANN on November 24, 2023, 10:10:46 AM
That seat looks great. I may send them my seat off of my 2020 Limited. I have hated the seat since day 1. I hated that seat so much, I bought a new take off from a 2017 CVO Limited.

Be Safe

THE DAWG
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on November 24, 2023, 11:08:46 AM
Call George. Great guy to work with.  Very helpful.
Title: Re: What did you do to or on your CVO today?
Post by: tlr on November 24, 2023, 06:19:11 PM
Have the 23 WN RG. My Corbin Solo was just delivered. I also purchased the HD Heavy “wedge” breather. Need to find some time this weekend to install both.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on November 25, 2023, 07:46:45 AM
It was a nice 59 degree day yesterday.  So my wife and I hopped on our bikes for a nice 112 mile ride. 
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on November 25, 2023, 07:59:47 PM
Nice!!! I'm jelly today.
Title: Re: What did you do to or on your CVO today?
Post by: TN on November 30, 2023, 07:29:44 PM
New wheel bearings to install at next tire change. 

Title: Re: What did you do to or on your CVO today?
Post by: Hondo2doc on December 03, 2023, 06:22:40 PM
Yesterday went on a charity bike run about 150 miles round trip. About 500 bikes. Organized by Miami-Dade police department. We rode from Doral the Keys.
There must have been over 100 Leo's on bikes to run this event.

I have to take my hat off to the popo for doing an amazing job. They had every single possible entrance on to our route blocked and covered. They shut down the turnpike (I'm sure that pissed off some folks) all the way down to US1. And then had US1 southbound closed off to our destination Gilbert's. I've been on a few toy runs and cluster F comes to mind describing them. Not this one.

Paid $20.00 registration fee got a t-shirt. And what a pleasurable experience.

Sent from my SM-G991B using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on December 04, 2023, 07:52:27 AM
Wow, that sounds like a well organized toy run.
Title: Re: What did you do to or on your CVO today?
Post by: Hondo2doc on December 04, 2023, 08:50:41 AM
Wow, that sounds like a well organized toy run.
Yes it really was Dave. Let me tell you the police even had the exits from like a gas station blocked or if you're trying to come out of a shopping mall blocked to the road so that no one could get access to the road that we were on. I've neve seen this type of organization with a toy run.

Sent from my SM-G991B using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on December 09, 2023, 07:48:19 PM
Switched out the stock front and rear speakers today. Went with Hertz. 6x9 in the bags. Lots of bass. Sounds great.
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on December 09, 2023, 07:50:04 PM
In the fairing. Really easy install from Volunteer audio.  I always upgrade the stock audio. Amps aren't out yet, but If I do upgrade, the speakers will be done.  These have a great sound all around. Stuart.
Title: Re: What did you do to or on your CVO today?
Post by: Hondo2doc on December 09, 2023, 07:57:35 PM
Switched out the stock front and rear speakers today. Went with Hertz. 6x9 in the bags. Lots of bass. Sounds great.
Congrats. I'm a big fan of volunteer audio. I recently did the hertz speakers in front fairing plus Amp and saddle bag speakers. Everything was so easy to install, plug and play.

Sent from my SM-G991B using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on December 09, 2023, 09:11:29 PM
With the videos they offer, they sure make it very easy. Great service and they offer great products too. Stuart. 👍👍
Title: Re: What did you do to or on your CVO today?
Post by: SDCVO on December 09, 2023, 10:46:32 PM
In the fairing. Really easy install from Volunteer audio.  I always upgrade the stock audio. Amps aren't out yet, but If I do upgrade, the speakers will be done.  These have a great sound all around. Stuart.
Atta boy Stu!!!
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on December 10, 2023, 08:19:40 AM
Good job Stuart.  One more thing to add to my list of wants for my bike.  Volunteer Audio has an excellent video out for this easy installation.
Title: Re: What did you do to or on your CVO today?
Post by: Hondo2doc on December 10, 2023, 10:52:51 AM
Good job Stuart.  One more thing to add to my list of wants for my bike.  Volunteer Audio has an excellent video out for this easy installation.
Yeah Jay with Volunteer Audio makes some great how to install videos. And they are happy to spend time with you on the phone too.

Sent from my SM-G991B using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: HOGMIKE on December 10, 2023, 02:34:47 PM
Started my 80k mile maintenance on the 2019 cvo.

Front forks = 80k miles
124 engine=. 52k miles on engine, 5000 mile oil change
Baker GB=.    40k miles, 10k oil change

Other normal maintenance items from the SM.

Front tire (AE) still looking pretty good with 20,000 miles. Rear tire pretty new.

Just got back from a short trip, bike is running great 👍
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on December 11, 2023, 06:09:28 AM
Good job on the maintenance.  Did you do the neck bearing or did you do that at 50K when the manual recommends it?
Title: Re: What did you do to or on your CVO today?
Post by: HOGMIKE on December 11, 2023, 08:33:58 AM
Good job on the maintenance.  Did you do the neck bearing or did you do that at 50K when the manual recommends it?


Neck bearings will be addressed when I remove the forks again and possibly the new front tire all at the same time.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on December 12, 2023, 06:58:09 AM
You have to be an expert with those front forks by now.
Title: Re: What did you do to or on your CVO today?
Post by: Scott7d on December 14, 2023, 04:50:55 PM
Logged my last big ride of the year. 1,133 miles from Bloomington Indiana to Conway Arkansas and back. Got a cool T-shirt from Toad Suck HD, ate some delicious seafood at The Mighty Crab, and crossed 38,000 miles for the year. This marks the fourth year in a row we've logged over 35,000 miles. Best was 2022 with over 43,000 miles. 2020 CVO Road Glide.

(https://i.ibb.co/NjKvgw7/odometer.png)
(https://i.ibb.co/p4HHzWp/seafood.jpg)
(https://i.ibb.co/n8ktyhH/the-mighty-crab.jpg)
(https://i.ibb.co/QFb5dQz/The-mighty-crab2.jpg)
(https://i.ibb.co/nCMVP1q/Toad-shirt.jpg)
(https://i.ibb.co/DpbCDgM/Toad-suck.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on December 15, 2023, 07:24:56 AM
That is quite the yearly miles streak.  Toad Suck Harley has some cool T-Shirt designs.  I've stopped there a couple of times.
Title: Re: What did you do to or on your CVO today?
Post by: KGB on December 15, 2023, 07:08:38 PM
Rode 220 miles, 3 State run, Ohio to West Virginia, then to PA, then home to Ohio


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on December 16, 2023, 08:45:29 PM
Found these on Amazon for the wife when we ride the Mako.  Great price and got em quick.
Title: Re: What did you do to or on your CVO today?
Post by: tpb857 on December 17, 2023, 08:30:31 AM
Rode 220 miles, 3 State run, Ohio to West Virginia, then to PA, then home to Ohio


Sent from my iPhone using Tapatalk

That’s one of my usual rides in reverse.  I start in PA, then OH, WV and back to PA.  I can close my eyes and know when I leave PA.  The roads really smooth out.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on December 18, 2023, 11:50:34 AM
Found these on Amazon for the wife when we ride the Mako.  Great price and got em quick.

Nice, I'm sure she will be happy with them.
Title: Re: What did you do to or on your CVO today?
Post by: kojak on December 22, 2023, 05:16:23 PM
Installed khromewerks mufflers and went for a 75 mile ride in 38 degree weather.
Title: Re: What did you do to or on your CVO today?
Post by: KGB on December 22, 2023, 06:51:35 PM
Installed khromewerks mufflers and went for a 75 mile ride in 38 degree weather.
How do you like the sound? Did you change the header also?


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: kojak on December 22, 2023, 07:41:03 PM
How do you like the sound? Did you change the header also?


Sent from my iPhone using Tapatalk
Im a big fan of KW mufflers, had them on my last 3 bikes. They dont sound like any other aftermarket mufflers. Im fine with the stock headers.
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on January 01, 2024, 04:48:08 PM
Showed some love to the mako today.   Runs and rides sooooooooo good.   Went for a nice ride and lunch with my wife. Beautiful day here today. We absolutely love our winters.  😎. Stuart
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on January 02, 2024, 08:39:30 AM
Yesterday I lead my clubs annual Frosty toes ride for lunch.  It was a brisk 40 degrees and overcast for 59 miles.  Good to be out the first day of the year.
Title: Re: What did you do to or on your CVO today?
Post by: maherjad on January 04, 2024, 02:25:03 PM
Added 2 quality flags on luggage rack
Title: Re: What did you do to or on your CVO today?
Post by: TN on January 06, 2024, 01:25:59 PM
Let some models pose on it   ;D
Title: Re: What did you do to or on your CVO today?
Post by: kojak on January 06, 2024, 01:56:42 PM
Got Apple CarPlay to work! Huge deal for me since I use Waze.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on January 06, 2024, 02:37:36 PM
Let some models pose on it   ;D
Memories made. Well done sir.

Sent from my SM-N981U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on January 07, 2024, 08:40:56 AM
Let some models pose on it   ;D
Making good memories!  Good times.
Title: Re: What did you do to or on your CVO today?
Post by: HOGMIKE on January 07, 2024, 07:37:30 PM
81850 on my 2019 cvo limited

New front tire, 19850 on the old one. Still had some tread left but I’ve got some trips the next couple of months.

Race tech front suspension setup.
Way better front suspension than the stock setup IMHO.
 
 8)
Title: Re: What did you do to or on your CVO today?
Post by: Hondo2doc on January 08, 2024, 07:02:36 AM
I recently joined my local HOG chapter 694. Really nice group of people and very well organized. Saturday went for a nice ride to Pig Beach BBQ in west palm. Ride was great food was great.

Sent from my SM-T500 using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on January 08, 2024, 07:59:23 AM
81850 on my 2019 cvo limited

New front tire, 19850 on the old one. Still had some tread left but I’ve got some trips the next couple of months.

Race tech front suspension setup.
Way better front suspension than the stock setup IMHO.
 
 8)
That looks good for 20K miles.
Title: Re: What did you do to or on your CVO today?
Post by: HOGMIKE on January 09, 2024, 08:22:57 AM
That looks good for 20K miles.



Yeah, I was going to run it for another 5000 miles till my next service but I had the wheel off anyway for the fork upgrade and wanted to try out my new plastic duckhead and accessory arm on my tire machine.
Amazing how nice the bike rides and handles with new rubber and forks!

 8)
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on January 10, 2024, 06:53:24 AM



Yeah, I was going to run it for another 5000 miles till my next service but I had the wheel off anyway for the fork upgrade and wanted to try out my new plastic duckhead and accessory arm on my tire machine.
Amazing how nice the bike rides and handles with new rubber and forks!

 8)

I'm sure the new fork upgrade is big difference.  The old oil and springs wear a bit in 81K miles.   New rubber is always nice.
Title: Re: What did you do to or on your CVO today?
Post by: HOGMIKE on January 11, 2024, 08:44:44 AM
I'm sure the new fork upgrade is big difference.  The old oil and springs wear a bit in 81K miles.   New rubber is always nice.

I had planned to order my custom race tech shocks yesterday but due to a 6-8 week wait I decided to pick up Öhlins off the shelf at my local HD dealer. I have some trips planned starting this Tuesday and wanted the bike to be ready.
The Ohlins came in cheaper (and I have some gift cards and a discount).They are setup for the heavy bagger. The Race tech were my first choice because of the front suspension I have and how well they work.
Hard decision but I’ll do some test riding today or tomorrow and get the settings dialed in.
 :nixweiss:
Title: Re: What did you do to or on your CVO today?
Post by: HOGMIKE on January 11, 2024, 12:58:39 PM
I’ll do a little test ride today.

I like the black shocks, not as noticeable as the gold color everyone else has! Blends in with my bike pretty well.

 :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: Finster101 on January 11, 2024, 07:27:30 PM
Oh, no, those big Ohlins cans aren't noticeable at all.   ;D
Title: Re: What did you do to or on your CVO today?
Post by: KGB on January 11, 2024, 08:35:09 PM
I’ll do a little test ride today.

I like the black shocks, not as noticeable as the gold color everyone else has! Blends in with my bike pretty well.

 :2vrolijk_21:
What filler lights are you using? Harley has some nice ones but they say they're not compatible with CVO limited


Sent from my iPhone using Tapatalk
Title: Re: What did you do to or on your CVO today?
Post by: HOGMIKE on January 12, 2024, 06:56:52 AM
What filler lights are you using? Harley has some nice ones but they say they're not compatible with CVO limited


Sent from my iPhone using Tapatalk


Those are the HD keystone filler lights and will fit if you remove the oem filler panel that is in that spot.
The support arm is the same on the baggers.
I’ve had those same lights on my previous CVOs and just kept them when I sold those other bikes.

Hope this helps
 8)
Title: Re: What did you do to or on your CVO today?
Post by: HOGMIKE on January 12, 2024, 07:18:05 AM
Oh, no, those big Ohlins cans aren't noticeable at all.   ;D

😂🤣😂

I HAD to get these as the ones I originally was after were piggyback style and had no rebound adjustments. There were questions about fitment also.
I got a good deal so these were  a no brainer!

I got a test ride yesterday and out of the box they were set for the bagger. Took one turn on the preload and left everything else alone. Amazing ride after my old worn out shocks.
 :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on January 12, 2024, 07:29:37 AM
😂🤣😂

I HAD to get these as the ones I originally was after were piggyback style and had no rebound adjustments. There were questions about fitment also.
I got a good deal so these were  a no brainer!

I got a test ride yesterday and out of the box they were set for the bagger. Took one turn on the preload and left everything else alone. Amazing ride after my old worn out shocks.
 :2vrolijk_21:
You have some nice suspension upgrades going on your bike.  I'm sure it feels like its better than new suspension wise.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on January 12, 2024, 07:32:49 AM
Took a nice 109 mile round trip ride to meet up with a friend and have a cigar.  Good weather in the low 50's.   

Title: Re: What did you do to or on your CVO today?
Post by: TN on January 14, 2024, 07:38:14 PM
Took a ride to the HD dealer, it was a cool 58*.

Had to park by the charger, I think it’s just for decoration.  :)

Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on January 14, 2024, 09:01:06 PM
Got a Robert Becker Design seat lock for my new cvo rg fancy seat. Can't be too careful out there.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on January 15, 2024, 07:20:07 AM
I have never seen that seat lock, neat design.  Wouldn't work for me with only running the solo seat.
Title: Re: What did you do to or on your CVO today?
Post by: HOGMIKE on January 15, 2024, 09:38:22 AM
Got a Robert Becker Design seat lock for my new cvo rg fancy seat. Can't be too careful out there.


Very nice!

We use a little different setup in East LA 😂
 8)
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on January 17, 2024, 12:00:45 AM
Mike,, I've seen those security screws before,, but I think anyone can buy the torx driver that can remove them. Just my. 02. Stuart
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on January 17, 2024, 08:19:22 AM
Mike,, I've seen those security screws before,, but I think anyone can buy the torx driver that can remove them. Just my. 02. Stuart
Yes, I have a set of sockets are for security torx screws.
Title: Re: What did you do to or on your CVO today?
Post by: HOGMIKE on January 17, 2024, 09:00:03 AM
Yes, I have a set of sockets are for security torx screws.

Agree, but not many “opportunity” thieves have a set with them and not many will take the time to get the correct size from Home Depot or Amazon.
Point is, no matter what the thief is after he’ll eventually take the entire bike and part it out to get what he (she) wants.

Remember the past when they took saddlebags? Always a temporary fix for that.
Get good insurance!
JMHO of course!
 :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: HOGMIKE on January 17, 2024, 09:21:29 AM
I'm sure the new fork upgrade is big difference.  The old oil and springs wear a bit in 81K miles.   New rubber is always nice.

Got to try out my new suspension upgrades and new rubber yesterday.

Amazing ride quality with new SE rear shocks and Racetech front fork setup!
We have awesome weather for a few days and touring the desert area around Palm Springs.
Got some freeway and lots of back roads. Twisty roads, straight roads, rough roads, ripple roads, just about everything!

I may set my suspension one click softer just to play with it.  :nixweiss:

Life is good! :2vrolijk_21:
Title: Re: What did you do to or on your CVO today?
Post by: HOGMIKE on January 17, 2024, 09:23:10 AM
Last night
Title: Re: What did you do to or on your CVO today?
Post by: Grizzly on January 17, 2024, 05:08:45 PM
Hey Mike,

Looks like life is real tough, eh?  (Had to throw in a little Canadian lingo)

You're there sitting around the pool enjoying an after dinner refreshment no doubt and we're freezing our butts off up here, but thankfully not nearly the snow Buffalo had received.  Yikes!

Enjoy!
Title: Re: What did you do to or on your CVO today?
Post by: HOGMIKE on January 17, 2024, 06:16:54 PM
Hey Mike,

Looks like life is real tough, eh?  (Had to throw in a little Canadian lingo)

You're there sitting around the pool enjoying an after dinner refreshment no doubt and we're freezing our butts off up here, but thankfully not nearly the snow Buffalo had received.  Yikes!

Enjoy!


No disrespect to anyone caught in the cold winter weather!
My wife won’t move, and we’re pretty much stuck in SoCal!
It’s not so bad if you know how to deal with it all.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on January 18, 2024, 08:59:02 AM
Agree, but not many “opportunity” thieves have a set with them and not many will take the time to get the correct size from Home Depot or Amazon.
Point is, no matter what the thief is after he’ll eventually take the entire bike and part it out to get what he (she) wants.

Remember the past when they took saddlebags? Always a temporary fix for that.
Get good insurance!
JMHO of course!
 :2vrolijk_21:
Very true on thieves, most are opportunity.  They don't have specialty tools.  They take what is easy.  That said, I keep my bags locked, my helmet is about the only easy thing to take on my bike and my seat.  I also have good insurance.

Jealous of the weather.  Monday we received the most snow I have seen since I moved here in Sept 2001, 9".  It was -2 yesterday morning, snow is staying 4 days, longest I have seen it last was three days.  We will be back in 50's next week, will be able to ride I hope.
Title: Re: What did you do to or on your CVO today?
Post by: Hondo2doc on January 18, 2024, 07:55:45 PM
Damn Dave 9" WTF. I'm envious as hell of your twisty Mountain Roads but not your Winters.

Sent from my SM-G991B using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on January 19, 2024, 08:47:11 AM
Damn Dave 9" WTF. I'm envious as hell of your twisty Mountain Roads but not your Winters.

Sent from my SM-G991B using Tapatalk
This very unusual for here.  I have been here 22 years and this is the most snow I have ever seen and the longest it has lasted.  Normally an inch, maybe two and gone the next day or two.  Once or twice a year.  I am able to ride most weeks year round.  2 weeks is the longest weather has kept me from riding.
Title: Re: What did you do to or on your CVO today?
Post by: TN on January 21, 2024, 02:58:56 PM
They have assigned me a parking spot at the local HD dealer for one week. 
After that it may be flagged for tow  :nixweiss:

How many dealers open 7 days a week?





Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on January 22, 2024, 06:49:22 AM
My local dealer is open 7 days a week except Thanksgiving, Christmas and New Years.  Or like last week, so much snow everything was shut.  Schools are still shut.

Title: Re: What did you do to or on your CVO today?
Post by: HOGMIKE on January 30, 2024, 10:43:02 PM
Had to move the bikes around a little.
The green one gets a new clutch (arrived today on ups) up on the lift! MAY have to replace lifters depending on my next “test ride”. Got those on the shelf as well.

The cvo moved to the right  bay, the softail will be ridden tomorrow so it gets closer to the doors.

Spent most of my day doing chores but tomorrow should be the same as today: light winds, temp in the mid to high 70’s.

Life is good.😊
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on February 04, 2024, 06:53:00 AM
Installed the Chopped Tour Pack on my Whiskey Neat yesterday.  Second time trying, Harley did not include mounting Hardware with the Tour Pack or the key matched lock.  Also no Instructions with either.  I was able to print instructions for mounting the Tour Pack so I could get the mounting Hardware at ACE.  Being the lock is a dealer only item I could not get the instructions on line to figure out the two button head cap screws I needed.  So a trip to the dealer, 56 miles one way.  They don't have then in stock, but they give me the size.  Yesterday, I found out the size they gave me is wrong. 

I did put the tour pack on, then took an 85 mile ride.  I think it looks pretty good.

(http://www.cvoharley.com/smf/gallery/6353_04_02_24_6_34_40.jpeg) 
Clear 3M film installed so putting on and off tour pack or luggage rack I don't scratch the paint

(http://www.cvoharley.com/smf/gallery/6353_04_02_24_6_35_46.jpeg)
Side view

(http://www.cvoharley.com/smf/gallery/6353_04_02_24_6_36_44.jpeg)
Another side view

(http://www.cvoharley.com/smf/gallery/6353_04_02_24_6_37_46.jpeg)
Rear View

(http://www.cvoharley.com/smf/gallery/6353_04_02_24_6_38_44.jpeg)
Close rear view
Title: Re: What did you do to or on your CVO today?
Post by: mstrobes on February 04, 2024, 08:31:11 AM
Installed the Chopped Tour Pack on my Whiskey Neat yesterday.  Second time trying, Harley did not include mounting Hardware with the Tour Pack or the key matched lock.  Also no Instructions with either.  I was able to print instructions for mounting the Tour Pack so I could get the mounting Hardware at ACE.  Being the lock is a dealer only item I could not get the instructions on line to figure out the two button head cap screws I needed.  So a trip to the dealer, 56 miles one way.  They don't have then in stock, but they give me the size.  Yesterday, I found out the size they gave me is wrong. 

I did put the tour pack on, then took an 85 mile ride.  I think it looks pretty good.

(http://www.cvoharley.com/smf/gallery/6353_04_02_24_6_34_40.jpeg) 
Clear 3M film installed so putting on and off tour pack or luggage rack I don't scratch the paint

(http://www.cvoharley.com/smf/gallery/6353_04_02_24_6_35_46.jpeg)
Side view

(http://www.cvoharley.com/smf/gallery/6353_04_02_24_6_36_44.jpeg)
Another side view

(http://www.cvoharley.com/smf/gallery/6353_04_02_24_6_37_46.jpeg)
Rear View

(http://www.cvoharley.com/smf/gallery/6353_04_02_24_6_38_44.jpeg)
Close rear view
Looks great Dave
Title: Re: What did you do to or on your CVO today?
Post by: GKroadking on February 04, 2024, 10:01:04 AM
Installed the Chopped Tour Pack on my Whiskey Neat yesterday.  Second time trying, Harley did not include mounting Hardware with the Tour Pack or the key matched lock.  Also no Instructions with either.  I was able to print instructions for mounting the Tour Pack so I could get the mounting Hardware at ACE.  Being the lock is a dealer only item I could not get the instructions on line to figure out the two button head cap screws I needed.  So a trip to the dealer, 56 miles one way.  They don't have then in stock, but they give me the size.  Yesterday, I found out the size they gave me is wrong. 

I did put the tour pack on, then took an 85 mile ride.  I think it looks pretty good.


Wow. The Tour Pack looks absolutely great. This is a very nice addition and fits your bike perfectly.
Title: Re: What did you do to or on your CVO today?
Post by: HOGMIKE on February 04, 2024, 11:20:27 AM
Installed the Chopped Tour Pack on my Whiskey Neat yesterday.  Second time trying, Harley did not include mounting Hardware with the Tour Pack or the key matched lock.  Also no Instructions with either.  I was able to print instructions for mounting the Tour Pack so I could get the mounting Hardware at ACE.  Being the lock is a dealer only item I could not get the instructions on line to figure out the two button head cap screws I needed.  So a trip to the dealer, 56 miles one way.  They don't have then in stock, but they give me the size.  Yesterday, I found out the size they gave me is wrong. 

I did put the tour pack on, then took an 85 mile ride.  I think it looks pretty good.

(http://www.cvoharley.com/smf/gallery/6353_04_02_24_6_34_40.jpeg) 
Clear 3M film installed so putting on and off tour pack or luggage rack I don't scratch the paint

Very nice addition to the bike and “practical” as well.
My local dealer is 3 miles away and not only do I call with the part number but have the parts guy pull the part, bag it and save it on the cabinets. Too many times they say they have it but don’t.
If they have to order it, I’ll get it on line myself and sent to my door, usually cheaper.

I like to support the local dealer when I can, but they only work on and stock parts for new bikes.
JME 🤔
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on February 04, 2024, 03:54:59 PM
Looks great Dave. Does it stay on for good?
Title: Re: What did you do to or on your CVO today?
Post by: Scott7d on February 04, 2024, 09:44:51 PM
Tried out my new Insta360 camera for the first time. Not the most exciting footage and still learning the software. This thing is going to be awesome on the long trips through the mountains. With the 360 capability you can change viewing angles AFTER it's already been recorded and downloaded to your phone.

Footage taken on February 4th in Nashville, Indiana.

https://youtu.be/QMKfYSdJubQ?si=R0fambL5H_U-sTlO
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on February 05, 2024, 10:51:24 AM
Looks great Dave. Does it stay on for good?
It's quick detach.  It will be on most the time riding local and for two to three night trips.  For anything longer, it will come off and my luggage rack will go on with my T-Bag Route 66 which can carry much more clothing.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on February 06, 2024, 07:16:06 AM
Took a little 108 mile ride on a beautiful day yesterday.  Got the correct button head cap screws to install the lock on my chopped tour pack.  Got the lock installed.  All and all a great day.
Title: Re: What did you do to or on your CVO today?
Post by: HOGMIKE on February 06, 2024, 08:09:34 AM
Took the front forks apart yesterday to change the settings on my gold valves for a little softer ride.
Decided to change the fork fluid at the same time.
Being a bat wing fairing, it’s pretty easy to R&R the front end.
We’ve got rain most all week but I’ll sneak in a ride later to try out the new setup.
☕️
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on February 08, 2024, 07:45:31 AM
I got in a short 53 mile ride on a sunny 59 degree day in East TN.  Got the new registration for this bike and the 03 Fatboy.
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on February 08, 2024, 07:18:05 PM
Well

After three months of non-riding I decided to see if Ol Orange Crush would still start up. It was really cold in the bunker, and she turned over really slow, but did light up. So I decided that even though my tags are dead to take a little spin around Bluefield. The old girl seemed to enjoy the attention as much as I enjoyed finally getting her out.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on February 08, 2024, 08:29:39 PM
Dug the '15 out of hibernation and went to a few dealers looking to trade it off on a new 24 RG in Whiskey Fire with the black package on it. Will sure miss those power locks if I can make a deal I like.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on February 10, 2024, 09:12:02 AM
Dug the '15 out of hibernation and went to a few dealers looking to trade it off on a new 24 RG in Whiskey Fire with the black package on it. Will sure miss those power locks if I can make a deal I like.
Good luck, hope you are able to make the deal.  I really want to see that color in person.  I wonder how close it is to my Whiskey Neat.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on February 10, 2024, 09:48:41 AM
Good luck, hope you are able to make the deal.  I really want to see that color in person.  I wonder how close it is to my Whiskey Neat.
It's quite a bit different. Think a brighter orange vs the deeper "honey" tone in yours (https://uploads.tapatalk-cdn.com/20240210/b34ad4cd6a01a8a5de097c2dc5566295.jpg)

Sent from my SM-N981U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on February 10, 2024, 06:29:47 PM
The Whiskey Fire is very floppie, meaning it changes color depending on the lighting. Looks anywhere from Red to Orange and shades in between. I like it
Title: Re: What did you do to or on your CVO today?
Post by: HOGMIKE on February 10, 2024, 07:40:46 PM
Took the front forks apart yesterday to change the settings on my gold valves for a little softer ride.
Decided to change the fork fluid at the same time.
Being a bat wing fairing, it’s pretty easy to R&R the front end.
We’ve got rain most all week but I’ll sneak in a ride later to try out the new setup.
☕️


Update: suspension working great!
Took a short ride up to the local mountains to check out the snow, looks pretty from below on the dry roads! LOL
👍


Title: Re: What did you do to or on your CVO today?
Post by: OBB on February 10, 2024, 09:13:23 PM
The Whiskey Fire is very floppie, meaning it changes color depending on the lighting. Looks anywhere from Red to Orange and shades in between. I like it
Maybe I'll ride it down this summer for you to look closer.

Sent from my SM-N981U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: OBB on February 10, 2024, 09:13:53 PM

Update: suspension working great!
Took a short ride up to the local mountains to check out the snow, looks pretty from below on the dry roads! LOL

Good deal.

Sent from my SM-N981U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on February 11, 2024, 07:41:19 AM
Put my new tags on the 23CVO, Pan America Special, Fatboy and Corvette.  Crappy rainy day.  Love the looks of the Yaffe Plate frame but its a pain to take off and reinstall.
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on February 11, 2024, 08:09:54 AM
Maybe I'll ride it down this summer for you to look closer.

Sent from my SM-N981U using Tapatalk

“Come On Down”
Title: Re: What did you do to or on your CVO today?
Post by: OBB on February 11, 2024, 11:29:47 AM
Put my new tags on the 23CVO, Pan America Special, Fatboy and Corvette.  Crappy rainy day.  Love the looks of the Yaffe Plate frame but its a pain to take off and reinstall.
Thanks for the reminder. I have to remove the one off the 12 if I can find the stock fixture

Sent from my SM-N981U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on February 12, 2024, 06:52:16 AM
Thanks for the reminder. I have to remove the one off the 12 if I can find the stock fixture

Sent from my SM-N981U using Tapatalk
It will fit the 23, and 24 CVO's.  Also will fit the 24 Road Glide and Street Glide with the new body work.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on February 12, 2024, 07:46:32 AM
It will fit the 23, and 24 CVO's.  Also will fit the 24 Road Glide and Street Glide with the new body work.
I thought it would. Thanks for the confirmation.

Sent from my SM-N981U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: MC16LTD on February 14, 2024, 10:55:07 AM
Sold her.   2 1/2 years riding in Phoenix area and just couldn't do it any more.  Drivers are beyond terrible in town and can't get out of the valley without an hour 1/2 plus on the freeway.  Can only ride through Prescott and Jerome so many times.   Lots of nice riding in South Carolina where you can never touch a freeway for several states over, not so much here.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on February 15, 2024, 06:48:44 AM
I had to pick up a prescription, weather was nice so I took the CVO.  23 miles to the Pharmacy.  Ended up riding a nice 88 miles.  Going to be  nicer today but have to take my wife in for cataract surgery, for the second eye.
Title: Re: What did you do to or on your CVO today?
Post by: HOGMIKE on February 15, 2024, 09:27:54 AM
Took a nice leisurely 350 mile ride to visit friends in Ft Mojave AZ yesterday. Weather was perfect, no winds!
They put me up in the “Harley Room” this time, it has a Corsair diving out of the ceiling!
Great time last night especially the filet dinner at the local steak house, thanks guys.

New suspension on the bike is great! I’ve been over this route many times and it can have some bad spots. The bike handles very nice now, even when passing over triple digits!

Dave, you remember the power of your 2019, is the new bike similar?

Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on February 16, 2024, 06:45:06 AM
Took a nice leisurely 350 mile ride to visit friends in Ft Mojave AZ yesterday. Weather was perfect, no winds!
They put me up in the “Harley Room” this time, it has a Corsair diving out of the ceiling!
Great time last night especially the filet dinner at the local steak house, thanks guys.

New suspension on the bike is great! I’ve been over this route many times and it can have some bad spots. The bike handles very nice now, even when passing over triple digits!

Dave, you remember the power of your 2019, is the new bike similar?

Yes I remember the power of the 2019.  No, this bike is not near that powerful.  The new bike does have a wider and flatter torque curve than my previous M8 motors except the built 19.  Power output on this VVT motor is similar to a Harley 131 Kit, but the VVT has a better torque curve. 

I do think once the aftermarket can tune the bike, a simple came change will make a very big difference.  A High Flow Air cleaner and slip ons are worth 8 foot pounds torque. Low 130's, 
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on February 20, 2024, 07:45:09 AM
I took a nice little 114 mile ride, it was a sunny 54 degree day.  Stopped by the dealer to have the plastic trim peace around the fork lock replaced under warranty. 

I also scheduled an Appointment for the Pan America Special to have a software update and to replace the chain, front and rear sprockets.  The single use nut for front sprocket final came in.  I was going to do it but there is no master link.  The center stand has to be removed to remove the chain.  Trying to get the springs off it while on a lift was to sketchy for me.
Title: Re: What did you do to or on your CVO today?
Post by: acevtwin on February 20, 2024, 08:56:39 AM
I took a nice little 114 mile ride, it was a sunny 54 degree day.  Stopped by the dealer to have the plastic trim peace around the fork lock replaced under warranty. 

I also scheduled an Appointment for the Pan America Special to have a software update and to replace the chain, front and rear sprockets.  The single use nut for front sprocket final came in.  I was going to do it but there is no master link.  The center stand has to be removed to remove the chain.  Trying to get the springs off it while on a lift was to sketchy for me.
The Chain and Sprockets wore out already?
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on February 21, 2024, 07:07:55 AM
The Chain and Sprockets wore out already?

The Chain is for sure, 22K miles.  The bike has seen off road, and some mud.  Sprockets do not look bad at all.  I was always told if you replace the chain you replace the sprockets.  I just do not understand why no master link.  Other higher power sport bikes have chains with master link.  Harley just making it where we would rather they do the work.
Title: Re: What did you do to or on your CVO today?
Post by: RivRaptor on February 21, 2024, 10:46:18 AM
Master links have been disappearing for awhile now.  Need to have chain breaker / installer kit handy these days.  It's a pain to use and you can mess the links and pins up if your not careful.  I prefer / miss master links also but you find less and less of them, cheaper to not provide one I guess just pick a random link and bust out the chain link kit.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on February 24, 2024, 06:49:24 AM
Rode 56 miles to the Dealer, had the chain, front and rear sprockets replaced on the Pan America Special.  Also had the latest software version installed.  Was a nice ride home, nice day 60 degrees.
Title: Re: What did you do to or on your CVO today?
Post by: OBB on February 24, 2024, 07:42:51 AM
Traded both of them in on this. Parts are already arriving for it. Still at the dealership waiting on a GDO to get installed and programmed then they'll deliver it.(https://uploads.tapatalk-cdn.com/20240224/a8855348abac836422f09aa64b46f903.jpg)

Sent from my SM-N981U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on February 24, 2024, 10:19:22 AM
       WTH is a GDO ???  good looking bike for sure, but 2 for 1 sounds crazy to me
Title: Re: What did you do to or on your CVO today?
Post by: OBB on February 24, 2024, 12:30:43 PM
       WTH is a GDO ???  good looking bike for sure, but 2 for 1 sounds crazy to me
Garage Door Opener. After having one for the last 12 years, I wasn't going to go without it. 2 for 1 might sound crazy but the deal was damn near a wash. I've wasted more in a casino in one night than what it cost me out of pocket. Trade values continue to tank every time new technology hits the streets. I was shell shocked at first but got over it quickly. High interest rates aren't helping matters for people that have to do any kind of financing.
Title: Re: What did you do to or on your CVO today?
Post by: kojak on February 24, 2024, 03:49:01 PM
Congrats on the new bike, OBB!
Title: Re: What did you do to or on your CVO today?
Post by: OBB on February 24, 2024, 04:38:37 PM
Congrats on the new bike, OBB!
Thanks Kojak. With my back issue causing other problems the RGU just wasn't getting ridden much so it was time. Made no sense to me to keep two non Ultras in the garage and the money was right. I had that 15 since new. A little over 9 years and it was the longest I ever owned any vehicle.

Sent from my SM-N981U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: fastfreddy on February 24, 2024, 09:24:02 PM
 OBB i get the trade in thing.... i wont even ask them what mine is worth nor am i ready for a new one :-\ . congrats on the new bike
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on February 25, 2024, 07:15:47 AM
Traded both of them in on this. Parts are already arriving for it. Still at the dealership waiting on a GDO to get installed and programmed then they'll deliver it.(https://uploads.tapatalk-cdn.com/20240224/a8855348abac836422f09aa64b46f903.jpg)

Sent from my SM-N981U using Tapatalk
Congratulations, that color looks great.  So what all parts you getting for it?

Garage Door Opener. After having one for the last 12 years, I wasn't going to go without it. 2 for 1 might sound crazy but the deal was damn near a wash. I've wasted more in a casino in one night than what it cost me out of pocket. Trade values continue to tank every time new technology hits the streets. I was shell shocked at first but got over it quickly. High interest rates aren't helping matters for people that have to do any kind of financing.
I sure understand you on Trade in values are in the tank.  High interest rates are hurting bike sales and car sales. 

Not sure I could go down to two bikes but I sure understand.  Minimal out of pocket really helps
Title: Re: What did you do to or on your CVO today?
Post by: OBB on February 25, 2024, 07:35:02 AM
Congratulations, that color looks great.  So what all parts you getting for it?
I sure understand you on Trade in values are in the tank.  High interest rates are hurting bike sales and car sales. 

Not sure I could go down to two bikes but I sure understand.  Minimal out of pocket really helps
The new style garage door opener that's Homelink compatible is the main culprit I'm waiting on as it needs programmed at the dealer. Heated grips @ $400 is steep but they only have the one set right now. 2 piece seat, saddlebag guards, tour pack spacer kit to put on my chopped pack I have now. New lock set for the TP matched to the bike. A few other things I can't think of at the moment. I've already ordered all new floor boards, highway pegs and Ciro HP mounts from ebay.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on February 26, 2024, 08:08:18 AM
The new style garage door opener that's Homelink compatible is the main culprit I'm waiting on as it needs programmed at the dealer. Heated grips @ $400 is steep but they only have the one set right now. 2 piece seat, saddlebag guards, tour pack spacer kit to put on my chopped pack I have now. New lock set for the TP matched to the bike. A few other things I can't think of at the moment. I've already ordered all new floor boards, highway pegs and Ciro HP mounts from ebay.
That home-link garage door opener is nice, and very easy to pair.  The spacer kit is definitely needed, I'm running mine solo, and it's way to close for my comfort in the solo position with the spacer.  Would clearly hit with out it.  Are you having them activate the Nav system?  Dealer has to do it even though it says customer can.  Joe had to have dealer do it.

I'm still not sure if I want to figure out how to make my chopped tour pack lock remotely like the bags.  Just got my bag latch inserts I need to install. 
Title: Re: What did you do to or on your CVO today?
Post by: OBB on February 26, 2024, 12:08:18 PM


That home-link garage door opener is nice, and very easy to pair.  The spacer kit is definitely needed, I'm running mine solo, and it's way to close for my comfort in the solo position with the spacer.  Would clearly hit with out it.  Are you having them activate the Nav system?  Dealer has to do it even though it says customer can.  Joe had to have dealer do it.

I'm still not sure if I want to figure out how to make my chopped tour pack lock remotely like the bags.  Just got my bag latch inserts I need to install.

Thinking about the nav part of it. Good info on having the dealer activate it. Was under the impression I could do it and was going to wait until the end of March.

Saddlebag latch inserts. Dammit. Something else I didn't think about. Thanks for spending my money

I know I have to change out that silver shift linkage for a black one. That stock one is hideous on a black engine.

Sent from my SM-N981U using Tapatalk

Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on February 27, 2024, 10:33:23 AM

Thinking about the nav part of it. Good info on having the dealer activate it. Was under the impression I could do it and was going to wait until the end of March.

Saddlebag latch inserts. Dammit. Something else I didn't think about. Thanks for spending my money

I know I have to change out that silver shift linkage for a black one. That stock one is hideous on a black engine.

Sent from my SM-N981U using Tapatalk

Eventually the owner will be able to, but currently the dealer has to do it, and there are two steps they have to do to activate the GPS.

I did a nice 103 mile ride around the block yesterday.  304 south to 68 west to Crossville, then 70 east to Kingson and 304 south.  Great curvy and hilly ride on a 71 degree day.
Title: Re: What did you do to or on your CVO today?
Post by: KGB on February 27, 2024, 11:10:35 AM
The new style garage door opener that's Homelink compatible is the main culprit I'm waiting on as it needs programmed at the dealer. Heated grips @ $400 is steep but they only have the one set right now. 2 piece seat, saddlebag guards, tour pack spacer kit to put on my chopped pack I have now. New lock set for the TP matched to the bike. A few other things I can't think of at the moment. I've already ordered all new floor boards, highway pegs and Ciro HP mounts from ebay.

Here is the newest GDO


https://youtu.be/8dR6t2zCLaA?si=5XlKa9vRZL4uIlG0
Title: Re: What did you do to or on your CVO today?
Post by: HOGMIKE on March 14, 2024, 06:19:57 AM
Finished up my 85k service yesterday, oil change, bug removal, etc, etc.
Made 3 trips to the hot springs last 2 months just to recharge MY batteries! LOL
60k on the 124 engine and still purring like a kitten (tiger). Amazing how nice this combo runs and the passing power when you need it. It pays to do the research when building a motor! Thanks again to all for your suggestions!

Had to replace my old worn out shocks last month and went with the H-D branded Ohlins rear setup.
Got a good deal with my discount and gift cards. Very nice ride quality.

Upcoming rally the end of the month, rooms booked, riding buddies all set, gonna be a good time!
👍👍
😎
Title: Re: What did you do to or on your CVO today?
Post by: GKroadking on March 14, 2024, 09:38:30 AM
Did some upgrades to my FLHXSE and converted my fork with damper cartridges from Bitubo.
https://www.bitubo.com/Bitubo/catalog/ENG/articolo/9-prodotti-finiti/izdsfkgsqx-cartuccia-regprecaricoestensionecompno-oil-car.html

Front and rear tires renewed with Avon Cobra Chrome.
https://www.avontyres.com/en-us/tyres/cobra-chrome?cartype=motorcycle

Spring can finally come, I'm looking forward to an exciting season  8)
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on March 14, 2024, 09:50:27 AM
I’m taking my first day off work this year to go ride Orange Crush. Figure I’ll ride down to Bristolto visit my favorite fishing stor, grab a bite to eat and zigzag my way back home.Just waiting for the temperature to rise a bit as it was 37 when I went in to the office for a few minutes to fix an ailing sulfur analyzer.

Supposed to warm up to 72 today but it’s still around 50 right now.
Title: Re: What did you do to or on your CVO today?
Post by: Cvostu on March 14, 2024, 07:44:49 PM
Congrats. Looks great. Enjoy. 👌
Title: Re: What did you do to or on your CVO today?
Post by: SHRADER on March 14, 2024, 08:23:57 PM
Well I just got home a little while ago. Nice little 240 mile ride today. Stopped at my favorite tackle store and BS’ed with the owner for an hour or so, then decided to ride on down to Johnson City to Wrecking Crew HD to look at some new iron. I ended up test riding a 24 Road Glide and a 23.5 CVO Street Glide that some pilgrim had bought then almost immediately traded it in on Whiskey Neat CVO Street Glide. One thing he had done was added 10” bars so I wanted to ride it to see how it felt compared to the 24 Road Glide.

The Road Glide was nice enough I reckon but I still feel like I’m riding a 49 Mercury with a deer throwed over the hood, no offense to those that like them. To me the Street Glide felt a lot better.

The 117 motor felt a little stouter than some pre 24 model 117’s I’ve ridden, and the 121 was stouter still but neither felt as strong as my built and tuned 117. Either one certainly had plenty of power to propel my fat butt around.

All in all it was a much needed fun day in the sunny mountains of WV, VA and TN.
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on March 15, 2024, 06:51:28 AM
Rode 56 miles over to SMHD on a beautiful sunny day.  Had them install the latest software updates on my 23.5 CVO.  Had a cigar and beer with a friend while they were doing that.  Then took a different route home, very comfortable 76 degrees.
Title: Re: What did you do to or on your CVO today?
Post by: HOGMIKE on March 15, 2024, 09:42:16 AM
Did 180 mile loop yesterday with just about every twisty road in the county!
Left at 9:30, got back home at 4:00. Stopped at an Irish pub for lunch, good food!

Found out they were having big thunderstorms at home: wind, rain, lightning, hail, etc!
We had dry roads, little wind, cool (58] temps. Guess we took the right route!

One of the girls had heated gear and complained it wasn’t working. Gotta plug it in to work! 🤣

Title: Re: What did you do to or on your CVO today?
Post by: Scott7d on March 18, 2024, 10:42:38 PM
Got back around 1am this morning after completing the St. Patrick's Day Iron Butt ride. 1,111 miles in 20 hours. This one was a little longer than usual because a majority of the route was on state/country roads. Man, it was worth it, though. I had a blast riding through TN and KY. Route 192 "The Rattlesnake" in KY was especially great.

https://new.spotwalla.com/trip/0475-a31321f-318a/view

(https://i.ibb.co/gZPjfxT/St-pat.jpg)
Title: Re: What did you do to or on your CVO today?
Post by: FLSTFI Dave on March 19, 2024, 07:45:59 AM
Looks like it was a nice ride. 
Title: Re: What did you do to or on your CVO today?
Post by: Finster101 on March 28, 2024, 12:31:46 PM
Okay, I'm jonesn'!  Where is Dave's daily adventures that we all have grown accustomed to?