www.CVOHARLEY.com
Custom Vehicle Discussions => CVO™ Breakout™ => Topic started by: dubbs25 on February 13, 2017, 09:17:29 PM
-
I was wondering if anyone put aftermarket pipes on the new CVO . I am concerned how it looks since the bike has gloss black and most aftermarkets are flat.
Any photos would be helpful !
Sent from my iPad using Tapatalk
-
Have attached a photo of my bike with RB exhaust
-
I have seem some one the starfire black breakouts with the V&H black pipes. Looks pretty good to me. Adds a nice contrast. Search for images in google or your favorit browser. They are there :2vrolijk_21:
-
Have attached a photo of my bike with RB exhaust
That looks better than expected! Does it sound good?
Sent from my Pixel XL using Tapatalk
-
The sound is fantastic , but quite loud with no baffles
-
Mine was loud to i installed a baffel and it made better power and tq
-
Mine was loud to i installed a baffel and it made better power and tq
Nice setup, I just want to find the nickel chrome already ! Someone has got to make them
Sent from my Pixel XL using Tapatalk
-
Have you thought about a stainless steel system? That would compliment the bike nicely. Remember, the exhaust takes a beating from heat, so if you get a pretty nickel or black chrome set up might not look nice for long.
-
Have you thought about a stainless steel system? That would compliment the bike nicely. Remember, the exhaust takes a beating from heat, so if you get a pretty nickel or black chrome set up might not look nice for long.
They are shields on the bike, not pipes
Sent from my Pixel XL using Tapatalk
-
I'm thinking I am just going to remove the baffles
Sent from my Pixel XL using Tapatalk
-
Have attached a photo of my bike with RB exhaust
Does it sound good? And thats 2 into 1 correct?
Sent from my iPad using Tapatalk
-
I went with the Magnaflow Gen X pipe for my 2016 CVO Breakout. I had their pipe covers black chromed to look more similar to the stock finish. The pictures don't do the pipes justice, they look darker than chrome. It sounds nasty also! Had some 581 cams installed with the exhaust and ran 99HP with 116TQ.
(http://i1377.photobucket.com/albums/ah77/bonnilyn/2016%20Harley%20CVO%20Pro-street%20breakout/20170422_182830_zps0dkzw2cb.jpg)
(http://i1377.photobucket.com/albums/ah77/bonnilyn/2016%20Harley%20CVO%20Pro-street%20breakout/20170422_182815_zpswp35tzvu.jpg)
-
I went with the Magnaflow Gen X pipe for my 2016 CVO Breakout. I had their pipe covers black chromed to look more similar to the stock finish. The pictures don't do the pipes justice, they look darker than chrome. It sounds nasty also! Had some 581 cams installed with the exhaust and ran 99HP with 116TQ.
(http://i1377.photobucket.com/albums/ah77/bonnilyn/2016%20Harley%20CVO%20Pro-street%20breakout/20170422_182830_zps0dkzw2cb.jpg)
(http://i1377.photobucket.com/albums/ah77/bonnilyn/2016%20Harley%20CVO%20Pro-street%20breakout/20170422_182815_zpswp35tzvu.jpg)
I apologize that this response is a year later...but I am looking at these pipes in black, or also thinking about Bassani road rage. Did you have to modify at all to get them to fit? Several places where I have looked at them say they are "not sure" they will fit the 16 Prostreet. One other question, which tuner did you go with? Looking at the fp3 and the power vision. Thanks!
Sent from my iPhone using Tapatalk
-
These are the Bassani Pro Street Turnouts on a '16, pretty happy with the way they turned out. Went with the FP3.
-
I kinda worried how the flat would look since everything was gloss, but I had put Rinehart slip ons first and they weren't really glossy. So I just happened to find the V&H pipe I was looking at a fantastic price so I couldn't not get it.I love the way it looks and sounds.
-
Here is my old Pro Street with the black Gen X.
(Oh, if anyone near Memphis needs the stock exhaust with the smoke heat shields, it’s in my attic and free)
-
Not black but Scorched Apple/Starfire Black as above.
-
D and D