Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Ironhorse]

Can anyone help me identify these parts/numbers please? Are they HD, or after market? I looked on the HD website and could not find them. One is a trim piece that fits between the lifter blocks, and the other one fits on the other side of the engine above the primary. Thanks.

[bisounours]

Cylinder Base Cover for
Twin Cam-Equipped Models
Add a finished chrome look to the left side of your Twin Cam
engine with this stylish chrome die-cast cover. Easy installation
with included hardware. (Shift linkage removed for photo.)
32753-01 Fits ’99-’06 Touring models.
’99-’05 Dyna® models with forward
controls, and ’00-’06 Softail® models.
Will not fi t with Engine Transmission
Top Covers P/N 66505-00,
66510-00, and 66513-00.

Lifter Block Cover
Unlike other lifter block covers on the market, this chrome-plated
cover features a design that helps hide the mounting hardware.
With an embossed Bar & Shield logo, this kit cleans up the
lifter block area and extends chrome from the gearcase cover
to the lifter tubes. Includes all mounting hardware and installation
tools.

18248-99 Fits ’99-’06 Touring and ’99-’05
Dyna models. Does not fi t with Top
Covers P/N 66513-00 or 66505-00,
Oil Hose Cover P/N 37961-02 or
Interface Cover P/N 66530-03.

18278-06 Fits ’06-later Dyna and
’07-later Touring models.

[Ironhorse]

Cylinder Base Cover for
Twin Cam-Equipped Models
Add a finished chrome look to the left side of your Twin Cam
engine with this stylish chrome die-cast cover. Easy installation
with included hardware. (Shift linkage removed for photo.)
32753-01 Fits ’99-’06 Touring models.
’99-’05 Dyna® models with forward
controls, and ’00-’06 Softail® models.
Will not fi t with Engine Transmission
Top Covers P/N 66505-00,
66510-00, and 66513-00.

Could you post a link to the HD site please? I entered in part number 32753-01 on the website search bar and found nothing.

[Fired00d]

More than likely the reason it's not finding anything on the MoCo website is they have discontinued production. However there is a brand new one listed on eBay - HARLEY-DAVIDSON CHROME CYLINDER BASE COVER, 32753-01, Not a bad price either... when I purchased one in '06 from MoCo MSRP was $49.95.

 
Ride Safe,
Fired00d
 

[Twolanerider]

Try 18262-00 Mark.  It's the lifter block covers with the little piece in between them.

https://www.harley-davidson.com/store/lifter-block-cover-pa-04-1826200--1

[Twolanerider]

Then check out a Kuryakyn 8143 for a pretty comparable cylinder base cover for the other side.


https://www.kuryakyn.com/products/211/cylinder-base-covers

[timo482]

lots of twin cam parts are no longer made. i have hoarded a few things that were cheap take offs but obviously would be hard to get later. there are a few wear parts im going to put in the hoard this year. [another set of lifters at least] my only real worry is that i expect to need to reman the engine in a few years, and hope i can still get parts then, rather than hoard my best guess rebuild parts now.

[skratch]

i wouldn't worry too much about being able to get the lifters.  the 2020 cvo uses the same lifters that hd has been using since '09.

[Twolanerider]

i wouldn't worry too much about being able to get the lifters.  the 2020 cvo uses the same lifters that hd has been using since '09.

 

It wasn't the lifters he was chasing.  Looking for a dress up cover for the lifter blocks.