www.CVOHARLEY.com
CVO Technical => Milwaukee-Eight => Topic started by: newseultra07 on March 25, 2019, 12:06:38 PM
-
Looking for a cam for my 2018 M8 CVO Limited. What would be a good choice.. Im not into running the motor at high RPM's looking for more lower end power up to say 3000-4000 RPM's. Was looking at the HD 447 Cam. Will also go with adjustable push rods.. No other mods planned. I already have a TTS Tuner, D & D headpipe & 2" Fullsac baffles in mufflers..
-
TTS 150
Or the RS 468
HD cams are junk.
-
TTS 100 or 150. 100 hits right off idle and carries to about 4200, 150 hits a bit later but carries a bit further.
-
TTS100 here. Solid cam.
-
I run a TTS 200 with the SE stage 3 114" (high compression) and love the cam. Pulls great all the way to 4,500. Excellent low speed driveability as well.
-
I went with the 22X on my 2019. I’m very happy with it. Lots of low end torque.
-
I'm also going with the Woods 22X. You can take a look at the FuelMoto site for CAM comparisons. There's a YouTube video posted by Cool Springs HD for the CAM shootout they did as well.
-
Love my 22X.
-
will an aftermarket cam void my warranty on a 2019?
-
will an aftermarket cam void my warranty on a 2019?
Yes.
-
Here's a RS472 cam in a 2019 114, It has those Bone Shaker Mufflers on it, hence the low end tq loss. It did turn out pretty good over all though, tuned by J&B Performance.
-
will an aftermarket cam void my warranty on a 2019?
I believe power train warranty only.
-
Here is my bike with the S&S 475 cam, S&S Sidewinder 2-n-1 exhaust. Pulls real good and the exhaust is awesome. Had a bit of clutch slip but not too bad.
-
Here is my bike with the S&S 475 cam, S&S Sidewinder 2-n-1 exhaust. Pulls real good and the exhaust is awesome. Had a bit of clutch slip but not too bad.
Looks great
-
Here is my bike with the S&S 475 cam, S&S Sidewinder 2-n-1 exhaust. Pulls real good and the exhaust is awesome. Had a bit of clutch slip but not too bad.
Were the heads 'worked on'?
-
TTS 150
Or the RS 468
HD cams are junk.
Yep, HD cams are crap!