www.CVOHARLEY.com
CVO Technical => Twin Cam => Topic started by: georgw221 on October 12, 2009, 05:54:24 PM
-
Which cams are in a 02 SERK ??
-
I wouldn't make a beer bet on it, but I believe you have SE 203's in the motor.
Be Safe
THE DAWG
-
Ok thanks ,,, What would be the best cam to replace it with ,,, If looking for low/mid tq. ???
-
There are lots of choices. I would look at S&S 570's in gear drive. You have a good crank and a timken to boot in that motor. Have who ever does the install check crank runout and make sure it is within specs and then slap in the new cam, bearings, and gear drive. While you have the motor open change the oil pump and buy a set of adjustable push rods!
Be Safe
THE DAWG