Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: Khrome Works Bagger Ape Handlebar  (Read 209 times)

0 Members and 1 Guest are viewing this topic.

Devious

  • Newbie
  • *
  • Offline Offline
  • Posts: 5
  • www.CVOHARLEY.com
    • LA


    • CVO1: 2013 Harley Davidson CVO
Khrome Works Bagger Ape Handlebar
« on: August 11, 2017, 11:02:39 AM »

I ordered the Khrome Works 10 inch rise 1 inch bars 12 inch center width. Im a do it yourself kinda person and before I got into taking it apart I was wondering if anyone knew if I would need to get new brake and clutch cables. My bike has the clear plastic coated braided cables. Thank you
Logged

CVOSO

  • Newbie
  • *
  • Offline Offline
  • Posts: 12
  • www.CVOHARLEY.com
    • PA


    • CVO1: 2013 FLHTCUSE8
Re: Khrome Works Bagger Ape Handlebar
« Reply #1 on: September 06, 2017, 07:22:09 AM »

Hi Devious... I installed LA Chopper Twin Peaks Bagger Bars (10") and used the stock lines (hydraulic).  I did mock things up before fully disassembling to see if there was enough line there.  My biggest issue was re-running all the wires - recommend just taking time and making sure it is done right.  Sorry I can't be of more help... Bear
Logged
Experience and education are the remedies for ignorance... there's no fix for 'stoopid'.

Devious

  • Newbie
  • *
  • Offline Offline
  • Posts: 5
  • www.CVOHARLEY.com
    • LA


    • CVO1: 2013 Harley Davidson CVO
Re: Khrome Works Bagger Ape Handlebar
« Reply #2 on: September 06, 2017, 11:44:37 AM »

Thanks for the info. I got it done. Once i got the fairing off there was plenty of slack. I probably could have gone higher if i wanted too. Thanks again
Logged

Lars

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 370
  • It's not the destination, "IT'S THE RIDE"

    • CVO1: 2013 SEUC8
Re: Khrome Works Bagger Ape Handlebar
« Reply #3 on: September 07, 2017, 02:30:15 PM »

Glad the bars worked out for you.
I sure like the Khome Werks 12" Bobber Apes that I installed on mine.
Had to extend the wires but the brake and clutch lines were plenty long enough with minor rerouteing.

Logged
Lars

Devious

  • Newbie
  • *
  • Offline Offline
  • Posts: 5
  • www.CVOHARLEY.com
    • LA


    • CVO1: 2013 Harley Davidson CVO
Re: Khrome Works Bagger Ape Handlebar
« Reply #4 on: September 07, 2017, 06:12:19 PM »

I didn't have to extend any wires. I cut a few zip ties under fairing and it worked out just fine. I'm going to take a pic tomorrow and post it here
Logged
 

Page created in 0.132 seconds with 21 queries.