Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: going to rebuild my 110  (Read 863 times)

0 Members and 1 Guest are viewing this topic.

laylonlor

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 832
  • I love YaBB 1G - SP1!
going to rebuild my 110
« on: December 17, 2017, 08:38:38 AM »

need 4.5 fly wheels welded trued  who has the best , and is harley F W welded?  think i 'll go with  120 build, can i use a (58 throttle body) all ready , have one,.. on this 120
Logged

Unbalanced

  • FUD Examiner
  • 5k CVO Member
  • ***
  • Online Online
  • Posts: 6397

    • CVO1: 2011 SESG,
    • CVO2: 2004 SEEG Pumpkin,
    • CVO3: 2002 Police Roadking, Maudie and Maybelle Slayer
Re: going to rebuild my 110
« Reply #1 on: December 17, 2017, 02:37:58 PM »

HD's cranks are not welded as they come.   Would recommend P3R or S&S over the HD's even SE Flywheels.   Would recommend 117 or 124 over 120, haven't had great luck with piston slap and longevity or power out of the 120'.  For dollars 124 much better value imo.
Logged
HBRR Florida Chapter,  STILL - The Fastest Chapter - Proven yet again Bikeweek 2017

laylonlor

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 832
  • I love YaBB 1G - SP1!
Re: going to rebuild my 110
« Reply #2 on: December 17, 2017, 05:01:28 PM »

thanks, ...124  what stoke and bore ?
Logged

Unbalanced

  • FUD Examiner
  • 5k CVO Member
  • ***
  • Online Online
  • Posts: 6397

    • CVO1: 2011 SESG,
    • CVO2: 2004 SEEG Pumpkin,
    • CVO3: 2002 Police Roadking, Maudie and Maybelle Slayer
going to rebuild my 110
« Reply #3 on: December 17, 2017, 05:36:52 PM »

4 1/8 x 4 5/8 is S&S 124

4 1/8 x 4 3/8 is 117
« Last Edit: December 17, 2017, 07:10:14 PM by Unbalanced »
Logged
HBRR Florida Chapter,  STILL - The Fastest Chapter - Proven yet again Bikeweek 2017

laylonlor

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 832
  • I love YaBB 1G - SP1!
Re: going to rebuild my 110
« Reply #4 on: December 17, 2017, 08:17:36 PM »

i would have thought the stroke would have been more, cause 110 is 4 3/8 stroke
Logged

goop

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 62
  • www.CVOHARLEY.com
    • IL

Re: going to rebuild my 110
« Reply #5 on: December 18, 2017, 09:18:05 AM »

im doing a 124 build right now with dragos bike works. im using the p3r crank. pretty much bullet proof. i went with the best crank as i might end up adding an aerocharger.
Logged
2016 cvo street glide

prodrag1320

  • AMRA & AHDRA P/D record holder
  • Vendor
  • Elite CVO Member
  • *
  • Offline Offline
  • Posts: 847
Re: going to rebuild my 110
« Reply #6 on: December 18, 2017, 05:50:21 PM »

Dont bother just welding the F/W's,it wont stop them from moving.your best bet is to use S&S,either with 4.375 or 4.625.personally,ide go the 124" route
 

Page created in 0.108 seconds with 20 queries.