Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Classic Beast]

Instead I would just put on the Lyndal composite rotors and the matching pads, it will double your braking power with no brake dust, squeaking or fade, plus they really reduce your unsprung weight which helps with handling and ride quality. http://www.lyndallracingbrakes.com/

[HogBreath]

I've got new PM rotors, calipers for both the front and rear of my 07 SEUC sitting on the kitchen table. I've had them for 2 months at least. I got them from Spiderman. He knew his stuff and was great to work with. I hope to get them installed in the next 2-3 weeks. Watch for photos and updates.

[WVULTRA]

Ok, I am kinda behind on brakes but I am thinking of retrofitting the Brembos on my 07. Read some back posts on the subject but did not see any conclusions. I realize new floaters are necessary but:
Are custom brackets necessary?
Are the touring and vrod calliper part #'s the same?
Is the rear a bolt in or are new brackets and rotors necessary too?
Anyone have a part # list?
Thanks, Roger

Trapper:

Here's my write up of the Conversion:

http://www.box.net/shared/nhergtkq5r

Parts list at the end.

 

[hard10]

Trapper:

Here's my write up of the Conversion:

http://www.box.net/shared/nhergtkq5r

Parts list at the end.

 

As I have said elsewhere, this is this best written article on this subject. I sure wish all instructions were this well written.

[WVULTRA]

hard10:

I appreciate your remarks!   

Now I need to get started on one for the cam upgrade.................

 

[Trapperdog]

Trapper:

Here's my write up of the Conversion:

http://www.box.net/shared/nhergtkq5r

Parts list at the end.

 

Great job on the instructions! Hard10 sent it to me yesterday and I have to agree with him that all instructions should be written so well! It would take me longer to write all that up than to do the job, appreciate the time. Also saw it on another forum answering the same question I asked, but by a friend of mine in Washington planning on doing the same thing. What a coincidence. You really get around..

[WVULTRA]

trapper:

Thanks for the kind words; and good luck if you do the conversion.  IMO, it's a fairly easy conversion once you've rounded up the necessary parts.

Feel free to mail me if you run into any problems.