Topic: 2002 SERK (Read 627 times)

georgw221 · « **on:** October 12, 2009, 05:54:24 PM »

Which cams are in a 02 SERK ??

DCFIREMANN · « **Reply #1 on:** October 12, 2009, 06:55:46 PM »

I wouldn't make a beer bet on it, but I believe you have SE 203's in the motor.

Be Safe

THE DAWG

georgw221 · « **Reply #2 on:** October 14, 2009, 11:07:31 AM »

Ok thanks ,,, What would be the best cam to replace it with ,,, If looking for low/mid tq.

DCFIREMANN · « **Reply #3 on:** October 14, 2009, 07:00:27 PM »

There are lots of choices. I would look at S&S 570's in gear drive. You have a good crank and a timken to boot in that motor. Have who ever does the install check crank runout and make sure it is within specs and then slap in the new cam, bearings, and gear drive. While you have the motor open change the oil pump and buy a set of adjustable push rods!

Be Safe

THE DAWG

Author Topic: 2002 SERK (Read 627 times)

georgw221

2002 SERK

DCFIREMANN

Re: 2002 SERK

georgw221

Re: 2002 SERK

DCFIREMANN

Re: 2002 SERK