Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Boatman]

Should be picking it up today.  Also, Boatman, attached is a different pic of the crankshaft.  The old rollers were all still there.

Good to know the crank bearing hadn't failed.  Hope you have a big grin on the ride home today!

[murphy]

You should probably make sure they have pulled the oil pan and cleaned it out too... some folks forget that part when little metal chunks are found floating around.

When my stuff went we had a look in the pan just in case... took another half hour or so to flush all the fine metal powder that congregated in there as well!

[CVORick]

Well, I didn't get the crank trued/balanced or install the timken bearing or the 10.5 to 1 pistons, but I did put in the SE259E cams.  Finally got it down to Doc yesterday and had it retuned. When Doc went retune with TTS, as my dealer had used my SERT key to install a "base map" for the new cam, we discovered that my dealer had installed a 2010 map.  Brilliant!!  I thought the bike was running poorly. DUH!  After correcting the map and tuning, the final numbers were 105.52 Max H.P. and 114.56 Max Torque.  Not to shabby.

[RedDevil]

Well, I didn't get the crank trued/balanced or install the timken bearing or the 10.5 to 1 pistons, but I did put in the SE259E cams.  Finally got it down to Doc yesterday and had it retuned. When Doc went retune with TTS, as my dealer had used my SERT key to install a "base map" for the new cam, we discovered that my dealer had installed a 2010 map.  Brilliant!!  I thought the bike was running poorly. DUH!  After correcting the map and tuning, the final numbers were 105.52 Max H.P. and 114.56 Max Torque.  Not to shabby.

Do you have a copy of the dyno run to share with us.  I'd like to see when your torque peaks and see if it's a relatively flat torque line once it peaks.  Those are nice numbers, but for me I need to see if the torque comes on at around 2700 rpms instead of up around 4500.  I'm rarely up there when I ride.

[CVORick]

Your right RedDevil.  See attached. Also now has 38 disk in Supertrapp.  Did have 32 disk.

[RedDevil]

Your right RedDevil.  See attached.

Thanks Rick.  That looks pretty nice.  Torque "comes on" starting at around 3K.  Not too shabby.  Nice stead HP climb up to peak.  Looks like you found a winner there.  

[CVORick]

Here is what the curve looked like with the 255 cam. This run had 32 disks in Supertrapp.

[Rio]

call the bomb squad first!!