i2zh2o,
I am having a Jims 120 c/w SBC Vortec Headwork being done right now. also going with Wild Things 57 MM Throttle Body with upgraded injectors.
Presently have the Freeedom Cycle True Duals which were on the SE 103", have a set of RB Racing LR 2:1 Blackhole on order will put them on when they arrive beginning of May.
Hopefully will be ridng the bike with the Jims 120 next week in Phoenix.
geezerglide
Geezer
I would be interested to know how you will get the 57mm Kuryakyn throttle body to work with the Jims 120. I wanted one of these also and had Tman install it for me but he had to take it off because of air leaks. The thing seems to be that the Jims engine is just slightly taller than a stock harley so that the manifolds are too short. He told me there was an outside possibility you could get away with it but he didn't feel it would be a quality job so we switched to the HPinc 56mm. Being the curious type I phoned Doug Lofgren at WCT who works for Kuryakyn and he told me that was correct the Wild Things TB will not fit (at least without some other mods) to the Jims 120 motor. Someone on another board told me that JIms makes a spacer for this application?
Jims 120 by TMan performance
TMan heads, 650 gear drive cams, fueling pump and lifters,30 degree domed pistons, 11.4/1 static compression, 200 lbs cranking pressure, HP inc 56mm TB, crank welded by falicon,Boarzilla pipe, no dyno yet (snow!!)