www.CVOHARLEY.com

CVO Technical => Intake/Exhaust/ECM => Topic started by: Pan1 on September 14, 2018, 06:29:41 AM

Title: Which Fullsac baffle
Post by: Pan1 on September 14, 2018, 06:29:41 AM

I am changing out  the D& D mufflers on my  2015 Twin Cam CVO RG that has  the HD 117 engine  stage IV  upgrade which I I used the HD 585 cam It already has the Fullsac DX pipe. Which fullsac baffles will provide the overall best performace in the 2,500-5,000 rpm range ?  How does the insulation and screens effect  permonce.

Thanks

Title: Re: Which Fullsac baffle
Post by: muddypaws on September 14, 2018, 09:24:13 AM

It's been a while but I went with the middle size and love them. I left the HD insulation on them.

Title: Re: Which Fullsac baffle
Post by: CVODON on September 14, 2018, 05:25:10 PM

You should contact Fullsac, he has more knowledge than most on this site and seems to me a very honest guy.

Title: Re: Which Fullsac baffle
Post by: fastfreddy on September 14, 2018, 06:05:20 PM

 2.0 for best over all performance, 1.75 for best low end tq. results, 2.25 for more noise results I have ran all three and that's my findings  ,also had the 2.50s … too much noise for me... and the BSR

Title: Re: Which Fullsac baffle
Post by: Pan1 on September 14, 2018, 06:51:39 PM

Thank you

Title: Re: Which Fullsac baffle
Post by: fastfreddy on September 14, 2018, 11:52:48 PM

 I should add im running the 1.75s and  the DX pipe in my  current bike  :2vrolijk_21: