www.CVOHARLEY.com
Custom Vehicle Discussions => 1999 FXR2/1999 FXR3/2000 FXR4 => Topic started by: 63SSRagtop on June 18, 2009, 04:50:51 AM
-
Has anyone done this type of install or seen it up close? Looks to be fairly straightforward, kit is specific to the FXR frame...
I'm planning on picking up the fender kit and putting on a 150 tire while i'm at it...
I haven'tfigured out the blinker situation as of yet but i do want to go with LED's all the way around..
(http://cracklecdn.zoovy.lg1.simplecdn.net/img/kcint/W400-H300-Bffffff/11318_a.jpg)
(http://cracklecdn.zoovy.lg1.simplecdn.net/img/kcint/W300-H225-Bffffff/11318_c.jpg)
(http://www.americanclassicmotors.net/98limefxstc8.JPG)
-
Hi,
I have the same Rear Fender on my FXR4 but I used a stock style FXWG tail light assembly. My fender is closer to the right side of the tire than the left. Why ? I don't know. You would need to change the axle spacers to center the wheel in the fender. I don't know what else you might need to do.
Good Luck!
LTank
-
Hi,
I have the same Rear Fender on my FXR4 but I used a stock style FXWG tail light assembly. My fender is closer to the right side of the tire than the left. Why ? I don't know. You would need to change the axle spacers to center the wheel in the fender. I don't know what else you might need to do.
Good Luck!
LTank
Hey Tank .... I'm sure you posted it somewhere .... I'd like to see a 'whole bike' picture of your bike .... the rear fender on there looks pretty kewl
Thanks