www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: FXR4 Sissy Bar  (Read 2889 times)

0 Members and 1 Guest are viewing this topic.

FXR4Jay

  • Swamp Dweller
  • Newbie
  • *
  • Offline Offline
  • Posts: 34
FXR4 Sissy Bar
« on: January 04, 2011, 07:54:13 AM »
Been looking around lots.. Want to put a Sissy Bar on my FXR4 and side rails I have looked at do not seem to match .. This one Pictured I would think would work but curious to know what others have done in this regard..  Thanks, Jay


Logged
Took me long Enough, but finally got my Dream Bike

skreminegul07

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2446
  • FLHRSEI.ORG
    • MA


    • CVO1: 2017 Indian Chieftain Limited
Re: FXR4 Sissy Bar
« Reply #1 on: January 04, 2011, 05:30:06 PM »
It came from HD with a low sissy bar support.  It uses the same as the Sportsters and Dynas did a few years back.  It has two side pieces then you add the sissy bar by the height you want and add the backrest pad. Go to the HD site, shop for parts and accessories, select the 2000 FXR4, then backrests. The side plates are Left 52797-87, 52798-87 right.
Logged
Any day on the bike is a good day.

FXR4Jay

  • Swamp Dweller
  • Newbie
  • *
  • Offline Offline
  • Posts: 34
Re: FXR4 Sissy Bar
« Reply #2 on: January 04, 2011, 09:01:37 PM »
Thanks Skrem   Will run the numbers down ...   
Logged
Took me long Enough, but finally got my Dream Bike

skreminegul07

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2446
  • FLHRSEI.ORG
    • MA


    • CVO1: 2017 Indian Chieftain Limited
Re: FXR4 Sissy Bar
« Reply #3 on: January 05, 2011, 08:39:28 AM »
Also, for any FXR parts, there is a website with thousands of parts.  Its a great place to find obsolete parts.  Also you can see what parts look like, etc. He's a bit pricey on shipping, you can negotiate.  I bought a few parts, all good.

www.elvisplace.com
Logged
Any day on the bike is a good day.

JamesButler

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 143
Re: FXR4 Sissy Bar
« Reply #4 on: January 05, 2011, 11:07:28 PM »
Unless you're really stuck on finding a part, I would steer clear of Elvis. He not only hammers you on shipping costs, but is harshly overpriced.  I'm all for making a dollar or two, but this guy is unreal.  He thinks so highly of himself that he includes an autographed photo of himself in the shipment (no joke).  I'm a 45 year-old-man.  What do I want with an autographed photo of another middle-aged man?  WTF?!
Logged

FXR4Jay

  • Swamp Dweller
  • Newbie
  • *
  • Offline Offline
  • Posts: 34
Re: FXR4 Sissy Bar
« Reply #5 on: January 06, 2011, 10:14:43 AM »
I have checked Elvis out and the only Sissy Bar has would need rechroming at a ridiculous price for it being used ..  Not saying the time won't come but be glad to get something from him, but am sure can't find something new or at least appears near new for a Bike that is spotless and looks new ..  I do appreciate all the input though ..
Logged
Took me long Enough, but finally got my Dream Bike

FXR4Jay

  • Swamp Dweller
  • Newbie
  • *
  • Offline Offline
  • Posts: 34
Re: FXR4 Sissy Bar
« Reply #6 on: January 08, 2011, 04:28:58 AM »
Found this one on ebay after searching most everywhere .. This came off a 1990 FXR and I believe it will work .. Even if it doesn't didn't pay that much for it, so should be able to get my money on it ..   


Logged
Took me long Enough, but finally got my Dream Bike

FXR4Jay

  • Swamp Dweller
  • Newbie
  • *
  • Offline Offline
  • Posts: 34
Re: FXR4 Sissy Bar
« Reply #7 on: February 06, 2011, 07:00:18 AM »
Problem Solved .. Sissy bar and Mustang Seat added.. Original Seat is Sealed and Mink Oiled for keeping also found a brand new Chrome Tank Trim and saved the Original which matches the Seat ...


Logged
Took me long Enough, but finally got my Dream Bike
 

Page created in 0.128 seconds with 22 queries.