Picked up more parts and moved most of the others to the pre-assembly resting spot at the shop.
Air cleaner cover, horn cover and hitch brackets not here. They'll eventually make it to the pile also. Some of this pile is experimental. The oil dipstick, for example, will likely be a chrome piece. Think I'll need to break up that area just a bit. Footboards might be chrome also. Especially when used to contrast the 95th anniversary colored footboard fringe that will be draped there. A splash of chrome in the middle will possibly be better.
Can't say enough good things about this local powder coater. Shop 15 minutes from the house. Small place with apparently tons of work. Quick enough for in and out. Work quality is outstanding. They're actually familiar with what they're working on so know what to cover and what not to.
On top of all that their prices are very reasonable too. This is a two stage job (color then clear). For all the parts shown and the frame the entire job cost for all clean, prep and finish was $450. Don't have a lot to compare against but when you think of cleaning the original powder coat off the frame that's a good amount of work. I'm very pleased.
Author
Topic: New 02 Brandywine SERK -- Long Term Project (Read 189531 times)