Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Twolanerider]

No great detail nor new information here.  Just liked the way the wind blown braiding punctuated the view of the tank.

[Twolanerider]

That derby cover was one of the hardest pieces to find of the entire build.  Every bit as tough to find as the paint.  Had a good air cleaner cover but saw a few them show up.  This thing was a bear though.  Finally found a source that had two and scored them both.  The other now lives on the SERG.  It's a good mate to that bike too.  The red bejeweled shift linkage was a cheap part but it goes well with the bike.

[Twolanerider]

Oh yeah!  Take that bitches !!

[Twolanerider]

More dash.  Ignition switch and round switch trim from an 07 SERK.  The 02 and 03s didn't get those pretty bits.  Kuryakyn gas cap and fuel/voltage gauge.

[naitram]

More dash.  Ignition switch and round switch trim from an 07 SERK.  The 02 and 03s didn't get those pretty bits.  Kuryakyn gas cap and fuel/voltage gauge.

had any issue with gas venting out with a full tank? mine used to leak if i filled the tank

[Twolanerider]

More braiding seen in the field of that damned good looking tank.  Bike specific air cleaner cover brightly centering the powder coated football and reflecting the river in the background.  All surrounding the colored rockers that are dotted with the 12 point chrome hardware. 

Did I mention this is a fair to middling looking bike?   

[Dkleinr]

Don, your bike looks awesome!!! Great job!!! (Thanks again for your help!!!)

[Twolanerider]

had any issue with gas venting out with a full tank? mine used to leak if i filled the tank

Neal, on my last Road King (2000 model) I used these same parts and had that problem. Asked a Kuryakyn rep about that.  He said it had been an issue in "early versions" of those parts but wasn't anymore.  So far he's been right.  Haven't had the problem with this set.

[Twolanerider]

Flamed signal housings from P&A catalog (think those are obsolete now) and flamed spotlight housings from Headwinds.  Nice complementary pairing.  The Headwinds mount bracket is sweet and does a great job of cleaning up the bottom of the neck.

[Twolanerider]

Oil pan, swingarm bushing blocks; the powder coat and 12 points are just everywhere.  Freaking everywhere!

[Twolanerider]

Red swingarm, chrome axle, loose nut behind the handlebars.  It's the only thing that can explain it all .

[Twolanerider]

And, maybe, my new favorite pic of the bike.

[Dead_Reckoning]

Flamed signal housings from P&A catalog (think those are obsolete now) and flamed spotlight housings from Headwinds.  Nice complementary pairing.  The Headwinds mount bracket is sweet and does a great job of cleaning up the bottom of the neck.

That looks very neat and clean.
Could you show a little more head on please.
Not exactly sure where the headwinds bracket is mounted.

Thanks
DR

[Twolanerider]

Don, your bike looks awesome!!! Great job!!! (Thanks again for your help!!!)

Thanks very much and glad to help out.  This was something like a three year project.  85% of the assembly happened this winter though.  Just in time for spring... 

[DJ56]

Where was that pic taken 2Lane?