CVO Technical > Twin Cam

Bolt Torque Specs

(1/1)

Joel:
I have been looking for engine bolt torque specs and not seeing anything here on this forum.
I have a 2015 Limited with the 110 and in the process of replacing the cam bearings and lifters,
I had a pdf with the repair and torque info but somehow lost it.
If you have the info I would appreciate it if you could post it here for me. Thanks

TN:
2015 touring models.

Joel:
Thank you,  that is very helpful.
Now if I can only find the service manual I had on that pdf I downloaded a few months ago when I bought my lifters and gaskets .
After going the route I did to save push rod tubes I see why some choose to go with adjustable push rods.
But I wanted to get the experience, and today I'll be removing and installing the new cam bearings.

TN:
Joel, you can find lots of info on the HD-SIP portal. It takes some time to get familar with navigating thru the site, lots of info is available if you take the time to do so.

I have heard that facebook has some manual sharing groups available also, I have no experience with them.

Good luck with your project

https://serviceinfo.harley-davidson.com/sip/index

Navigation

[0] Message Index