Post by: WildmanUltra on June 14, 2019, 04:08:49 PM
I searched and found people asking how to do this but never found out HOW.
I don't want to break the plastic so I figured it was better to ask. I've got about 5 hours of riding time on the bike so far and know that I want to try rolling the bars forward before I replace them.
Is there any pictures of where I need to pry the tab loose? Or a video?
Thanks.
Post by: fastfreddy on June 14, 2019, 05:27:55 PM
Post by: OBB on June 14, 2019, 07:26:50 PM
Sent from my boring Droid phone.
Post by: bgdv1 on June 16, 2019, 03:07:32 PM
Sent from my SM-G892A using Tapatalk
Post by: WildmanUltra on June 16, 2019, 08:04:07 PM
Mine has a chrome cover over the switches and is blocking the little groove. Im almost breaking the chrome cover trying to get it off. Suggestions? Oh and I just bought the bike used a few weeks ago.
Sent from my SM-G892A using Tapatalk
Congrats on the new bike. I have only had mine since Thursday 13 June 19. So far I love the new bike compared to my 2011 RGU.
Post by: WildmanUltra on June 17, 2019, 11:52:40 AM
Post by: WildmanUltra on June 23, 2019, 01:52:08 PM
I'm trying to undo all the cobbled CRAP the PO had done to this bike. Instead of buying the CORRECT parts when he took the heel shifter off he used a piece of pipe and some clear backing tape to keep the pipe from rattling...………... :'( :'( :( >:(
Then the Airfoil parts are BO until Nov so I've got to go with a different design. I'll get it all figured out and fixed just is frustrating a little that someone would do this to a $40K bike.
Post by: WildmanUltra on June 24, 2019, 09:50:17 PM
Post by: OBB on June 25, 2019, 05:59:48 AM
Getting the Dang Nab surround back into the bike was harder than taking the thing off. I'm going to order a spare one since I bent the plastic tab a little.part number 25700335. Been there, done that.
Post by: WildmanUltra on June 25, 2019, 08:45:03 AM
part number 25700335. Been there, done that.
That part number is no longer valid.
Here is the part # for the black one. 25700870
Do you have a part # for the sticker that goes on top?
The funny part of all this was that whom ever did the PDI on this bike hadn't taken the plastic cover off the trim piece. :nixweiss:
Post by: OBB on June 25, 2019, 10:51:09 AM
That part number is no longer valid.When I ordered mine, it was vin protected because of that damn sticker.
Here is the part # for the black one. 25700870
Do you have a part # for the sticker that goes on top?
The funny part of all this was that whom ever did the PDI on this bike hadn't taken the plastic cover off the trim piece. :nixweiss:
Not sure if you can get just the sticker.Sent from my boring Droid phone.
Post by: WildmanUltra on June 25, 2019, 11:13:41 AM
When I ordered mine, it was vin protected because of that damn sticker.
Sent from my boring Droid phone.
When I take it in for the 117" kit I'll ask the parts guy. I like the black trim piece better and I don't really need the sticker telling me which way is locked or unlocked.
Post by: fastfreddy on June 25, 2019, 03:09:37 PM
Post by: OBB on June 25, 2019, 05:38:33 PM
When I take it in for the 117" kit I'll ask the parts guy. I like the black trim piece better and I don't really need the sticker telling me which way is locked or unlocked.Sounds like a winner there. Lots of people out there doing custom plates that stick on that horseshoe if you get so inclined.
Sent from my boring Droid phone.
Post by: WildmanUltra on June 30, 2019, 06:26:48 PM
(https://img.photobucket.com/albums/v654/wildman4x4nut/CVO%20Road%20Glide%20Ultra/20190628_192546_zps0vuv161i.jpg)
(https://img.photobucket.com/albums/v654/wildman4x4nut/CVO%20Road%20Glide%20Ultra/20190628_192559_zpsactd6a1d.jpg)
Post by: bigchuck on June 30, 2019, 07:28:00 PM