www.CVOHARLEY.com
Custom Vehicle Discussions => CVO™ Street Glide® => Topic started by: JustDennis on October 07, 2014, 09:58:04 AM
-
I want to put either 10" or 12" Yaffe Monkey Bars on my 2010 FLHXSE but not really sure what all I need. I have been following the threads here and am still not sure if the bars with work with the hydraulic clutch. I talked to sales at Yaffe and they said that I would need to get a different clutch part for the bars to work.
Have any of you used the Yaffe MBB with stock parts? They suggested I call Hill Country Customs. Really just looking for direction. Thanks
-
I put Yaffe's 12" on mine and replaced all the lines, including the front brake lines from under the triple trees to the front brakes, clutch line and the lines to & from the ABS.
I bought the whole setup from Yaffe. Worked perfect!
I hear the 10" can use stock lines. Their are some threads on here if your run a search.
By the way, I love my 12" bars. You can still see with your stock mirrors on the fairing. You cannot with the 10's.
-
So you didn't have any issues with the hydraulic clutch not fitting?
Ride Safe,
JustDennis
Sent from my iPhone using Tapatalk
-
Put 10's on mine and only extended wiring but not cuz I had too but wanted to to keep things in original location under the fairing. No issues with clutch master cylinder like they say may happen. Some have said yaffe makes a set of bars for CVO that have a flat spot milled on them for clutch master clearance issues but no flat spot in mine and they work fine!! 2011 flhxse2
-
Put 10's on mine and only extended wiring but not cuz I had too but wanted to to keep things in original location under the fairing. No issues with clutch master cylinder like they say may happen. Some have said yaffe makes a set of bars for CVO that have a flat spot milled on them for clutch master clearance issues but no flat spot in mine and they work fine!! 2011 flhxse2
Thanks, when I spoke to Yaffe yesterday, they told me they didn't have a special set of bars for my application (CVO) but that I could get a different clutch part. Sounds like I can just get the regular 10" bars. I appreciate the response. I will probably extend the wires also. Getting ready for winter projects!
-
JD,
Have a look at this thread I started a while back. I did 14" PYO MBBs, and I did +8 on the brake and clutch line.
http://www.cvoharley.com/smf/index.php?topic=69807.msg968011#msg968011
The clutch MC may touch the bars, but it's a non issue.
Let me know if you have any questions I can help answer.
-
JD,
Have a look at this thread I started a while back. I did 14" PYO MBBs, and I did +8 on the brake and clutch line.
http://www.cvoharley.com/smf/index.php?topic=69807.msg968011#msg968011
The clutch MC may touch the bars, but it's a non issue.
Let me know if you have any questions I can help answer.
Thanks. I'll take a look.