Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[BigLock]

Thanks phone is a Motorola Android didn't see anything that would let me resize.

[BigLock]

Trying this

[BigLock]

Next one maybe got it

[BigLock]

As you can see in the above pictures the outside cover with the 117 on it is smaller than the filter. So the cover is on the rubber part of the filter. Thanks to Fired00d for your help with this picture sizing. Now just need to get adding next pictures in some repile.

[Threephase]

Another option. I did this in 2018. Bigger than T Man no loss filter.

https://www.cvoharley.com/smf/index.php?topic=117074.msg1478880#msg1478880

[rayson56]

That is the $50.00 replacement filter E-3988 that I used for my project, but I used the original backing plate. Works fantastic too!

[newseultra07]

I ordered the Ventilator Extreme filter.. It was shipped yesterday from Surdyke...

[JMK]

How different is the size of the M8 filter from the twin cam? is it possible to backfit the 2.5 inch thick K&N M8 filter to the stock twin cam backplate?
Thanks

[Ta2dResqr]

https://www.fuelmotousa.com/i-23897773-kn-fuel-moto-custom-hi-flow-air-cleaner-for-m8-ventilator.html#!year%3D2018%7C%7Cmake%3DHARLEY-DAVIDSON%7C%7Cmodel%3DTOURING%20FLH%2FFLT%20MODELS

I plan to get this and try it out. I have read good reviews online. It seems to be an in house modified part and not available anywhere else. claims an 80% increase in air flow. Dyno proven up to 150 hp. Works with the stock TB and the SE 64MM. It is a modified backing plate, filter, and hardware for $269. It uses your stock cover.

[VRODDAVE]

Big lock,   I'm not sure how to do a screen capture on your phone, however on the iPhone if you pull the picture up and then do a screenshot it will save into the photo album at a smaller size. You can edit the photo to crop out any unwanted parts of the screen

[Mr D]

https://www.fuelmotousa.com/i-23897773-kn-fuel-moto-custom-hi-flow-air-cleaner-for-m8-ventilator.html#!year%3D2018%7C%7Cmake%3DHARLEY-DAVIDSON%7C%7Cmodel%3DTOURING%20FLH%2FFLT%20MODELS

I plan to get this and try it out. I have read good reviews online. It seems to be an in house modified part and not available anywhere else. claims an 80% increase in air flow. Dyno proven up to 150 hp. Works with the stock TB and the SE 64MM. It is a modified backing plate, filter, and hardware for $269. It uses your stock cover.

How did the FM kit work out ?
Are you running the stock fuel map ?

[2019CVONH]

https://www.fuelmotousa.com/i-23897773-kn-fuel-moto-custom-hi-flow-air-cleaner-for-m8-ventilator.html#!year%3D2018%7C%7Cmake%3DHARLEY-DAVIDSON%7C%7Cmodel%3DTOURING%20FLH%2FFLT%20MODELS

I plan to get this and try it out. I have read good reviews online. It seems to be an in house modified part and not available anywhere else. claims an 80% increase in air flow. Dyno proven up to 150 hp. Works with the stock TB and the SE 64MM. It is a modified backing plate, filter, and hardware for $269. It uses your stock cover.

I have this on my 2019 CVO and love it. It does stand off a little more than the stock one but only a little and you get used to it quickly.


Sent from my iPhone using Tapatalk

[HOGMIKE]

I have this on my 2019 CVO and love it. It does stand off a little more than the stock one but only a little and you get used to it quickly.


Sent from my iPhone using Tapatalk

I’ve got the same one on my 124” 2019 cvo, don’t really notice the increase width.
Nice fit and finish. Uses the stock cvo cover.