Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[TN]

I bought a king TP off ebay for 350. didnt care about color because I repainted to match the bike. I used the solo set up. worked great

i really like the paint job on the tourpak.

guess this is the first time you heard this.


TN

[9 1/2 Beers]

Nice job Larry B

[altugo]

Yeah larry looks real cool do you have paint codes for yellow one?

[hdbrad03]

I wish some one could come up with paint codes for the Yellow Roadglides. I tried at local PPG paint supplier and they could not match the Yellow Pearl or the Cahrcoal Slate.


 
     Brad

[altugo]

I wish some one could come up with paint codes for the Yellow Roadglides. I tried at local PPG paint supplier and they could not match the Yellow Pearl or the Cahrcoal Slate.


 
     Brad

Harley sells a color matched tourpac for se roadglides but no lowers yet.Below is the link.Go to the bottom of the page.Costs about 1200


http://www.harley-davidson.com/gma/gma_product.jsp?PRODUCT%3C%3Eprd_id=845524448768209&FOLDER%3C%3Efolder_id=2534374309148514&ASSORTMENT%3C%3East_id=2534374309148514&bmUID=1239182503514&bmLocale=en_US

[LarryB]

Chances are, the colors won't match if you buy from H-D. the bikes from PA, accessories from WI.
You need to find a real good local painter/body guy. he can shoot it and match it. might take a couple tries.
the two factors to consider, 1) what color is the base coat, under the paint you see. & 2) the size of the metal flake. H-D uses a large flake and you will get close only.
Ya TN, I've heard that a time or two. and my pants get tight every time

[FLSTFI Dave]

Lary I have to say that is the first time I have seen a King Tour Pac look good in the solo position.  Great job with that.

[elmo]

Actually lowers are available....

http://www.harley-davidson.com/gma/gma_product.jsp?PRODUCT%3C%3Eprd_id=845524441844843&FOLDER%3C%3Efolder_id=2534374309148514&ASSORTMENT%3C%3East_id=2534374309148514&bmUID=1239222859337&bmLocale=en_US

The part number for Titanium Dust is 58861-09DAK

Call Jenny at Tri-County Harley, she knows us well here on the forum, 20% off parts and no sales tax...

http://www.tri-countyharleydavidson.com/miscpage_005.asp

Hope this helps

[LarryB]

Elmo,
read up on it here, the paint has not been matching well from the MOCO on these items

[LarryB]

I wish some one could come up with paint codes for the Yellow Roadglides. I tried at local PPG paint supplier and they could not match the Yellow Pearl or the Cahrcoal Slate.


 
     Brad

PPG cant and wont match it, they make it for HD. you gotta find a local paint guy with nads to do it

[jonga]

Wow, thats exactly what my SERG would look like if I had one, lowers, tourpack, larger shield. Thats the sweetest one I've seen yet. Congrats on a great job.....     Jon

[Carlos Silva]

Elmo,
read up on it here, the paint has not been matching well from the MOCO on these items

my Titanium lowers match perfect

[LarryB]

Carlos, sure looks like it from here, good job, weren't they fun to install?
whats all that green stuff on the trees across the street

[Carlos Silva]

Carlos, sure looks like it from here, good job, weren't they fun to install?
whats all that green stuff on the trees across the street

install was not too bad, but fun? - no...and don't forget to check if the wellnuts were installed at the factory, mine weren't...part number is 5212

...green in the background is called October...I can tell by the spooky skeleton on the lamp post

[LarryB]

i got the jack nuts at ACE is the Place. dealer looked at me like I had a hump on my back. i had to insert a spacer on the left side to keep it off my upper. there are suttle difference each year and mine came off an 06. could not use the quick disconnect hardware. since my temps have been holding down, I may keep them on longer than expected