www.CVOHARLEY.com

Custom Vehicle Discussions => Screamin' Eagle® Road Glide® => Topic started by: xcmoose on March 31, 2010, 01:21:07 PM

Title: Question on Heavy Breather
Post by: xcmoose on March 31, 2010, 01:21:07 PM

I think there has been dissicussion on this in past but, with the heavy breather is there a chrome option for the black backer plate?

Title: Re: Question on Heavy Breather
Post by: 20 gauge on March 31, 2010, 02:18:57 PM

Only option I  am aware of is which chromer do I take the black one to?   

Title: Re: Question on Heavy Breather
Post by: HDDOCFL on April 01, 2010, 09:14:27 AM

http://www.kuryakyn.com/index.cfm/go/Home.ProductDetail/catID/15/scID/32/IMID/1473  I have seen this piece used with the heavy breather.

Title: Re: Question on Heavy Breather
Post by: DESERTBEAR54 on April 01, 2010, 10:13:05 AM

Just find a plater in your local area and have it chrome plated. I have been wanting to do that on mine but I just don't want to disturb things on that intake. Especially the o-rings.

Title: Re: Question on Heavy Breather
Post by: just-us-6 on April 05, 2010, 12:26:31 AM

I also have a stock one chromed, getting put on in the next couple weeks while doing some engine upgrades. I think the stock piece chromed will look much better!

Title: Re: Question on Heavy Breather
Post by: Break-In on May 03, 2010, 09:32:53 PM

The Harley shop I deal with sent the backplate to be chromed, and when the piece was done I took my bike in and they installed the breather.