Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[dnlpnd]

Has anyone redirected the rocker box breathers on 2014 or newer stock CVO Heavy Breather backing plate?

I know the Kury Bluegrass Breather Kit was not designed to work with this backing plate/throttle body.  However, the kit was cheap and I purchased for inspiration anyway.  I am determined to make something work in this regard with or without the Kury 90 degree elbowed banjo fittings.

Any ideas would be greatly appreciated.

Thank You,

dnlpnd

[robertg]

Mine was done on the older style Heavy Breather. It looks like it would be more difficult with the new style breather. You would have to make another bolt #4 and have it seal up to the Kury elbow some how.

[dnlpnd]

Mine was done on the older style Heavy Breather. It looks like it would be more difficult with the new style breather. You would have to make another bolt #4 and have it seal up to the Kury elbow some how.

That is what I was afraid you'd say.  I thought your picture on a previous post looked a little different.

What do you think of milling off the thickness of the Kury parts on the backside of the backer plate?  Then cross-drill and tap the stock passages into the air intake to be filled with two hex set screws on each side.  I would still have to figure out something with the bolts.

Thanks,

dnlpnd

[robertg]

It's hard to say without seeing it in person. it might be easier to buy an old style Heavy Breather and sell yours.