www.CVOHARLEY.com
Custom Vehicle Discussions => CVO™ Street Glide® => Topic started by: Nicky Pass on July 09, 2016, 05:13:41 PM
-
I purchased my 2015 CVO Street Glide in December of 2014. It remained stock until spring of 2015...as of July 2016, I think I'm done modding....
Vance and Hines Power Duals
Rinehart 4" slip one with chrome tips
Power Vision Tuner with Fuelmoto Map
Custom LePera Silouhette
10" Yaffe Monkey Bars
Klockwerks Slicer Fender Painted by Joe at Xtreme Dimension
Legend Aero rear air ride with instant up
Custom Dynamics Ringz
....there is not much else that I can do, so I took her out to test out the new seat....I love it! It sits me back and 2" and 1" lower....I feel "in" the bike now.
I took some pics...
(http://i50.photobucket.com/albums/f340/NickyPass/2DCE4215-4AF5-4558-9E84-B1B4EEA2FAFD_zpspyphlvgg.jpg) (http://s50.photobucket.com/user/NickyPass/media/2DCE4215-4AF5-4558-9E84-B1B4EEA2FAFD_zpspyphlvgg.jpg.html)
(http://i50.photobucket.com/albums/f340/NickyPass/F91D9D6E-8EC8-4009-990A-125530C02E69_zps1j9rqlup.jpg) (http://s50.photobucket.com/user/NickyPass/media/F91D9D6E-8EC8-4009-990A-125530C02E69_zps1j9rqlup.jpg.html)
(http://i50.photobucket.com/albums/f340/NickyPass/A6375E47-1DB2-41AC-831E-657A7E5C8283_zpsqxs3gqju.jpg) (http://s50.photobucket.com/user/NickyPass/media/A6375E47-1DB2-41AC-831E-657A7E5C8283_zpsqxs3gqju.jpg.html)
(http://i50.photobucket.com/albums/f340/NickyPass/791E1D8C-1414-45A7-B42F-DF1EBC23D03A_zpslqtgf78e.jpg) (http://s50.photobucket.com/user/NickyPass/media/791E1D8C-1414-45A7-B42F-DF1EBC23D03A_zpslqtgf78e.jpg.html)
-
Nicely done. :2vrolijk_21:
-
Beauty! the seat looks great and if it sets you down and back, I just might have to get one. Stock seat is really comfy but i feel like Im to far forward.
Yaffe's site says new clutch and brake lines with the 10" were you able to make the stock lines work or did you have to swap them out?
-
Can you provide the contact information for extreme dimensions?
-
Can you provide the contact information for extreme dimensions?
You can find Joe @ Extreme's info by doing a search on here. Many folks have used him.
-
It looks good, Nicky.
-
Now your done with this one it's time for # 2 in the stall and start all over again always nice to have a backup !!!
Dante
-
Now your done with this one it's time for # 2 in the stall and start all over again always nice to have a backup !!!
Dante
The next thing going in my stable is a Mustang GT 350....some how, some way!
-
That front fender looks great. Very classy ride!
Sent from my iPhone using Tapatalk
-
Beauty! the seat looks great and if it sets you down and back, I just might have to get one. Stock seat is really comfy but i feel like Im to far forward.
Yaffe's site says new clutch and brake lines with the 10" were you able to make the stock lines work or did you have to swap them out?
Looks great Nick. I have the Yaffe 10's on my 15 CVOSG, longer clutch cable and brake line were not needed. You may need wire extensions. I went with a set of 4" Namz which are plug and play, worked out well.
-
SWEET!!!!!!!!!!!!!!!!!!
-
I purchased my 2015 CVO Street Glide in December of 2014. It remained stock until spring of 2015...as of July 2016, I think I'm done modding....
Vance and Hines Power Duals
Rinehart 4" slip one with chrome tips
Power Vision Tuner with Fuelmoto Map
Custom LePera Silouhette
10" Yaffe Monkey Bars
Klockwerks Slicer Fender Painted by Joe at Xtreme Dimension
Legend Aero rear air ride with instant up
Custom Dynamics Ringz
....there is not much else that I can do, so I took her out to test out the new seat....I love it! It sits me back and 2" and 1" lower....I feel "in" the bike now.
I took some pics...
(http://i50.photobucket.com/albums/f340/NickyPass/2DCE4215-4AF5-4558-9E84-B1B4EEA2FAFD_zpspyphlvgg.jpg) (http://s50.photobucket.com/user/NickyPass/media/2DCE4215-4AF5-4558-9E84-B1B4EEA2FAFD_zpspyphlvgg.jpg.html)
(http://i50.photobucket.com/albums/f340/NickyPass/F91D9D6E-8EC8-4009-990A-125530C02E69_zps1j9rqlup.jpg) (http://s50.photobucket.com/user/NickyPass/media/F91D9D6E-8EC8-4009-990A-125530C02E69_zps1j9rqlup.jpg.html)
(http://i50.photobucket.com/albums/f340/NickyPass/A6375E47-1DB2-41AC-831E-657A7E5C8283_zpsqxs3gqju.jpg) (http://s50.photobucket.com/user/NickyPass/media/A6375E47-1DB2-41AC-831E-657A7E5C8283_zpsqxs3gqju.jpg.html)
(http://i50.photobucket.com/albums/f340/NickyPass/791E1D8C-1414-45A7-B42F-DF1EBC23D03A_zpslqtgf78e.jpg) (http://s50.photobucket.com/user/NickyPass/media/791E1D8C-1414-45A7-B42F-DF1EBC23D03A_zpslqtgf78e.jpg.html)
Beautiful bike! What is the tire hugger front fender called? I like that look!
-
Looks great. . So nice to be "done".. . . Stuart :2vrolijk_21:
-
That sir, is a beautiful bike......
-
very nice bike. if you like music like I do then you will need to upgrade the speakers and amp to a soundz stage 5
-
Nicky,
Any issues using the fairing mirrors effectively running with the 10's ?
-
Nicky,
Any issues using the fairing mirrors effectively running with the 10's ?
My next door neighbor has a '16 SESG. He wanted more bars so he bought 12" and we installed them. They look cool, but even with the 12", he has to raise his arm to see very well. He may end up going to upright mirrors bolted through the handle mounts.
I just did 10.5" on my '09 SERG and I have the upright mirrors. I find that I like having the mirrors higher is a good thing for visibility, but they don't look as cool as the SG fairing mounted mirrors. I like the new bars at that height and they fit well for me all around.
-
Nicky,
Any issues using the fairing mirrors effectively running with the 10's ?
I have those bars as well and had to buy new mirrors to mount on the bars. I could not see the fairing mirrors at all.
-
Another pic
-
I went with 10" Chubby's and they blocked the fairing mirrors as well.
-
I have those bars as well and had to buy new mirrors to mount on the bars. I could not see the fairing mirrors at all.
What did you use to fill the holes from the mirrors?
-
I went with 10" Chubby's and they blocked the fairing mirrors as well.
What did you use to fill the holes from the mirrors ?
-
What did you use to fill the holes from the mirrors ?
Had these painted to match the inner fairing since they come only in black or chrome. I wanted them to blend in as much as possible.
http://www.revzilla.com/motorcycle/la-choppers-fairing-mirror-hole-plugs-for-harley-touring-1996-2016
-
Had these painted to match the inner fairing since they come only in black or chrome. I wanted them to blend in as much as possible.
http://www.revzilla.com/motorcycle/la-choppers-fairing-mirror-hole-plugs-for-harley-touring-1996-2016
:2vrolijk_21:
I saw a SG @ a dealer (customer bike) with the same size medallion but with "Willie G" skull...a nice touch
-
Very nice...thanks for sharing. :2vrolijk_21:
-
What did you use to fill the holes from the mirrors?
A set of the newer Harley plugs. Very small, black plastic.
-
Beauty!!! I'm seriously thinking of air ride too, any ride complaints?
P
-
Looks great!