www.CVOHARLEY.com
Custom Vehicle Discussions => CVO™ Street Glide® => Topic started by: TIF2 on June 05, 2010, 02:31:28 AM
-
Thought I was done but can't seem to leave it alone. Here are my latest.
These are the P&A lifter covers and a Vo2 Breather with Duke cover. Had to give both a "CVO" spin with a touch of granite. Happy overall with the way it came out. Also added a Kury TB bracket cover and a TB Servo cover. The middle of the lifter block covers tried my patience but was worth it I think. The B&S really pops by leaving it chrome (the stock piece is all chrome in the center).
All comments are appreciated ....
-
Another of the Vo2 Breather:
-
Replaced my Dresser Duals with an X-Pipe and added the P&A stock heat shields in black. Pretty disappointed with the heat shields - definitely not as high a quality as the stock chrome ones. I may try and score another set of stock chrome ones and send them out to get coated.
-
I posted this in another thread and a few folks wanted a shot in natural light. This is the P&A Radio Faceplate (comes brushed aluminum) that I shot gloss black to match the stock inner fairing and added the Bar and Shield logo in the upper right. Gives the radio a much richer appearance from the stock dull black plastic.