Topic: bolt below kuryakyn curved license plate (Read 3353 times)

scotr · « **on:** April 15, 2010, 10:21:48 PM »

I got my kuryakyn 9182 installed. Said a Hail Mary something like this. Father please forgive me for what i am about to do and drilled the four holes. My question is the bolt below. I believe it is the bag stabalizer. I asked local steeler if i could get a CVO cover for it and he said no. Does anyone know where i can get one. Thanks.

Scotr

JCZ · « **Reply #1 on:** April 15, 2010, 10:27:57 PM »

If you located it just right, the bolt shouldn't show.

bluegoose · « **Reply #2 on:** April 16, 2010, 04:57:04 PM »

The CVO emblem is a restricted part. You need a VIN number to order one.

8 U UP · « **Reply #3 on:** April 16, 2010, 11:05:21 PM »

You can't cover the gromet hole and bolt 100%

JCZ · « **Reply #4 on:** April 17, 2010, 09:59:29 AM »

Quote from: 8 U UP on April 16, 2010, 11:05:21 PM

You can't cover the gromet hole and bolt 100%

You're right, if you get down level with the bottom of the plate frame you can see it. But I figure nobody's going to see that unless it's up on the lift. Just hasn't been an issue.

scotr · « **Reply #5 on:** April 18, 2010, 05:11:43 AM »

Can i use the vin # from my 2010 Street Glide CVO to order one?

DICKW · « **Reply #6 on:** April 18, 2010, 06:49:16 AM »

Quote from: scotr on April 18, 2010, 05:11:43 AM

Can i use the vin # from my 2010 Street Glide CVO to order one?

I am sure someone here that has an Ultra can get one for you. Just so you know they are $52.00 ish.

I ripped mine off when I did my license plate (relocation) and had one in my hand...........then I thought about it and gave it back.

scotr · « **Reply #7 on:** April 18, 2010, 11:50:03 AM »

Where is it located at on the CVO Ultra.
Scotr

trwtow · « **Reply #8 on:** April 18, 2010, 12:14:43 PM »

low on rear fender

trwtow · « **Reply #9 on:** April 18, 2010, 12:20:29 PM »

mine now may change to emblem above post what do you think switch it or leave it alone thanks terry

scotr · « **Reply #10 on:** April 18, 2010, 01:08:53 PM »

Real cool! Thanks

Scotr

trwtow · « **Reply #11 on:** April 20, 2010, 08:34:13 PM »

done i like this better

trwtow · « **Reply #12 on:** April 21, 2010, 06:58:37 PM »

well its on what you think

devoinbk · « **Reply #13 on:** April 21, 2010, 07:40:12 PM »

LoooooooooooooooKS NiiiiiiiiiiiiiiiiiiiiiiE

BUBBLEHEAD · « **Reply #14 on:** April 21, 2010, 07:46:20 PM »

Quote

well its on what you think

Didn't care for first emblem at all. Second one looks like it belongs. Like the second one.

mjb765 · « **Reply #15 on:** April 21, 2010, 07:56:22 PM »

I may have to get that one in case I run into the same problem.....

trwtow · « **Reply #16 on:** April 21, 2010, 08:07:17 PM »

Quote from: BUBBLEHEAD on April 21, 2010, 07:46:20 PM

Didn't care for first emblem at all. Second one looks like it belongs. Like the second one.

i agree dealer put the first one on before i got bike when they did plate for me. didnt look right now im happy also had to turn plate frame over it was upside down. thanks terry

scotr · « **Reply #17 on:** April 21, 2010, 09:35:43 PM »

New emblem looks great. I have been working on my map. Been very busy.

I sure hope i can find one of those!

Scotr

worshipduder · « **Reply #18 on:** April 21, 2010, 11:45:19 PM »

Quote from: trwtow on April 20, 2010, 08:34:13 PM

done i like this better

looks great. where did you find the emblem?

Badger Mike · « **Reply #19 on:** April 25, 2010, 03:29:02 PM »

Looking for the emblem too...

mjb765 · « **Reply #20 on:** April 25, 2010, 04:18:29 PM »

Found 1 on EBAY

trwtow · « **Reply #21 on:** April 25, 2010, 04:25:16 PM »

Quote from: mjb765 on April 25, 2010, 04:18:29 PM

Found 1 on EBAY

thats wher i got mine

Badger Mike · « **Reply #22 on:** April 25, 2010, 08:33:07 PM »

Found one. Thanks.

scotr · « **Reply #23 on:** May 02, 2010, 11:07:34 AM »

found one also, thanks.

Scotr

Author Topic: bolt below kuryakyn curved license plate (Read 3353 times)