www.CVOHARLEY.com
Custom Vehicle Discussions => CVO™ Breakout™ => Topic started by: Jessecochran on February 12, 2021, 09:57:33 AM
-
Has anyone removed their stock fairing from their CVO Breakout? I have a 2017 and would appreciate any advise
-
Just pull it off. Mounts in 4 places in gromments.
-
Sometimes when things are too easy it confuses guys. Take a look at the two red circles I added to the exploded view. You'll see the piece that is part of the fairing and the rubber grommet it plugs in to. It's the same thing HD does on touring side covers. They do just pull apart. If it's not clear in the pic the grommets are installed on the bike. The spikes on the fairing then insert in to them.
-
Sometimes when things are too easy it confuses guys. Take a look at the two red circles I added to the exploded view. You'll see the piece that is part of the fairing and the rubber grommet it plugs in to. It's the same thing HD does on touring side covers. They do just pull apart. If it's not clear in the pic the grommets are installed on the bike. The spikes on the fairing then insert in to them.
Don once again coming thru in the clutch
-
Don once again coming thru in the clutch
I'm just a big fan of the exploded view in parts manuals. That picture to me is often worth far more than the thousand words in a service manual.
-
Thank you! I would have never figured that out. Like you said. It was too easy
-
:2vrolijk_21: :2vrolijk_21: