www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: 04 SEEG radio and arc audio  (Read 729 times)

0 Members and 1 Guest are viewing this topic.

Darty411

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 84
  • FLHRSEI.ORG
04 SEEG radio and arc audio
« on: April 10, 2010, 09:03:16 PM »
Gonna try to explain this.  I have the 04 SEEG..Upgraded to the Arc audio amp and 6.5" speakers..Cant get rid of the alternator whine.  Ground loop noise is terrible...louder as rpm's increase..I have changed from High Z input to a low z (RCA) input..no help..installed ground loop isolator in line with that..no help..the floating ground on this bike is killing me...is there any fix?  what if i use the standard speaker outputs instead of the cvo speaker outputs? Arc has no answers...Thanks for your help!
Logged

hdbrad03

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2097
  • FLHRSEI.ORG

    • CVO1: 2009 FLTRSE3 Yellow Pearl/Charcoal Slate
    • CVO2: FLHTCSE-Pumpkin
    • CVO3: FLTRI 06
Re: 04 SEEG radio and arc audio
« Reply #1 on: April 10, 2010, 09:40:51 PM »
The CVO speaker leads are connected to an internal 60 watt amp in the radio, yes I would switch the standard leads. Also pull the upper plug on the radio.


 :bananarock: :bananarock:
     Brad
Logged
I was there.  Were you?

East Coast
New River Gorge (10, 15)
Rib Fest (10, 11, 14, 15)
Wild WV (16)
Maggie Valley (08, 09, 10, 11, 12, 13, 14, 15, 16, 17)

West Coast
Sedona, AZ (08)
Pala (10)
Santa Fe, NM (13)

Darty411

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 84
  • FLHRSEI.ORG
Re: 04 SEEG radio and arc audio
« Reply #2 on: April 10, 2010, 09:43:16 PM »
Thanks brad....gonna try that in the am....
Logged
 

Page created in 0.201 seconds with 21 queries.