Topic: FLHXSE w/Accessories (Read 11865 times)

michaelbmenaker · « **on:** August 31, 2009, 05:32:21 PM »

You all know what a Spiced Rum looks like, but I thought you'd want to see one with passing lamps, adj. wind deflectors, mid-frame heat deflectors, HDs FLH Zumo 660 mount (very sweet), floorboards, and Flanders bars with 2" more pullback and 2" taller (then rotated back for a bit more reach and to clear the mirrors).

At one photo per post, this will take a few, but keep reading...

michaelbmenaker · « **Reply #1 on:** August 31, 2009, 05:33:03 PM »

Right side

michaelbmenaker · « **Reply #2 on:** August 31, 2009, 05:34:11 PM »

michaelbmenaker · « **Reply #3 on:** August 31, 2009, 05:34:39 PM »

michaelbmenaker · « **Reply #4 on:** August 31, 2009, 05:35:16 PM »

michaelbmenaker · « **Reply #5 on:** August 31, 2009, 05:35:49 PM »

mjb765 · « **Reply #6 on:** August 31, 2009, 06:04:54 PM »

Sweeeet....

RedDevil · « **Reply #7 on:** August 31, 2009, 08:41:58 PM »

Looking great...So what are you going to do with the rear passenger pegs? If you're thinking of selling them, you have a buyer right here.

Let me know.

Buy early · « **Reply #8 on:** August 31, 2009, 09:32:05 PM »

Sweet mods! Love the bars. What's next?

michaelbmenaker · « **Reply #9 on:** August 31, 2009, 09:37:09 PM »

Quote from: RedDevil on August 31, 2009, 08:41:58 PM

Looking great...So what are you going to do with the rear passenger pegs? If you're thinking of selling them, you have a buyer right here. Let me know.

I'm keeping them for highway pegs if I can ever save enough to buy lowers...

michaelbmenaker · « **Reply #10 on:** August 31, 2009, 09:38:15 PM »

Quote from: Buy early on August 31, 2009, 09:32:05 PM

Sweet mods! Love the bars. What's next?

If I can save enough money, lowers and a tour pak would be about all I can think of. But, with all the card carrying OCD members here, I'm sure I'll get suggestions.

aero8 · « **Reply #11 on:** September 01, 2009, 02:45:09 AM »

What is the part number of the passing lamps? So far the dealer here doesnt have the 2010 P/A-catalog. Thanks for your help!

Was the installation complicated/ time consuming, was removal of the fairing necessary? Where do you placed the switch for them?

Thanks for your help!
Aero8

TIF2 · « **Reply #12 on:** September 01, 2009, 05:03:22 AM »

Quote from: michaelbmenaker on August 31, 2009, 09:38:15 PM

If I can save enough money ...

That's probably an oxymoronic statement with having this bike

I've read the post regarding the matching floorboards but haven't looked into cost for the setup, any approximation? It's probably something I am going to do. Also, did you need to buy longer lines for the Flander bars?

Looking good for sure!

michaelbmenaker · « **Reply #13 on:** September 01, 2009, 11:41:40 AM »

Quote from: aero8 on September 01, 2009, 02:45:09 AM

What is the part number of the passing lamps? So far the dealer here doesnt have the 2010 P/A-catalog. Thanks for your help!

Was the installation complicated/ time consuming, was removal of the fairing necessary? Where do you placed the switch for them?

Thanks for your help!
Aero8

Here's the # for the passing lamps 69818-06
Fits '06-later FLHX and FLHXXX models. Kit includes passing lamp housings, retaining rings, chrome mounting brackets, auxiliary lamp switch and hardware. Auxiliary Lamp Bulbs and Bullet Turn Signal Kits sold separately.
MSRP US $299.95

But, you also need turn signals, sold separately, of course. All in all, the parts were about $520. My mechanic at the dealer said it was a relatively easy install, but I don't have separate quote for the labor on this one item.

michaelbmenaker · « **Reply #14 on:** September 01, 2009, 11:43:02 AM »

Quote from: TIF2 on September 01, 2009, 05:03:22 AM

That's probably an oxymoronic statement with having this bike

I've read the post regarding the matching floorboards but haven't looked into cost for the setup, any approximation? It's probably something I am going to do. Also, did you need to buy longer lines for the Flander bars?

Looking good for sure!

The floorboards had to be ordered part by part using parts #s from the '10 CVO Ultra. Came to about $500 or so total without the adjustable mounts used on the Ultra.

RedDevil · « **Reply #15 on:** September 01, 2009, 03:17:47 PM »

Quote from: michaelbmenaker on August 31, 2009, 09:37:09 PM

I'm keeping them for highway pegs if I can ever save enough to buy lowers...

I figured you would, but had to ask anyway.

I noticed that you have the Road Glide antenna on your SESG. Did you replace your stock one with that, or did your dealer do the same for you that they did for me. My Cap'n Morgan came without an antenna from the factory and the sales manager not wanting me to take the bike without an antenna, took one off of a Road Glide and put it on my bike and then ordered the SESG antenna, which they have since put on my bike.

WFP · « **Reply #16 on:** September 01, 2009, 05:45:59 PM »

Quote from: RedDevil on September 01, 2009, 03:17:47 PM

I figured you would, but had to ask anyway. I noticed that you have the Road Glide antenna on your SESG. Did you replace your stock one with that, or did your dealer do the same for you that they did for me. My Cap'n Morgan came without an antenna from the factory and the sales manager not wanting me to take the bike without an antenna, took one off of a Road Glide and put it on my bike and then ordered the SESG antenna, which they have since put on my bike.

I got two antennas with my SESG...the one that is about 2-1/2 feet and the one that is about 15"

RedDevil · « **Reply #17 on:** September 01, 2009, 08:17:36 PM »

Quote from: WFP on September 01, 2009, 05:45:59 PM

I got two antennas with my SESG...the one that is about 2-1/2 feet and the one that is about 15"

That's great Bill, I think the short one is the only one that's supposed to come with the bike, so you made out.

WFP · « **Reply #18 on:** September 01, 2009, 08:29:01 PM »

Quote from: RedDevil on September 01, 2009, 08:17:36 PM

That's great Bill, I think the short one is the only one that's supposed to come with the bike, so you made out.

Yeah, a freebie for spending more than $30K...

RedDevil · « **Reply #19 on:** September 01, 2009, 10:30:17 PM »

Quote from: WFP on September 01, 2009, 08:29:01 PM

Yeah, a freebie for spending more than $30K...

LOL...that's one way to look at it.

nidan · « **Reply #20 on:** September 02, 2009, 07:01:06 AM »

Nicely done !

MOBlue · « **Reply #21 on:** September 08, 2009, 10:41:06 AM »

Quote from: michaelbmenaker on August 31, 2009, 05:34:39 PM

bars

Hi...
Curious if the new bars interfere with your line of sight to the mirrors?

Dave

mjb765 · « **Reply #22 on:** September 08, 2009, 10:44:30 AM »

Quote from: michaelbmenaker on September 01, 2009, 11:41:40 AM

Here's the # for the passing lamps 69818-06
Fits '06-later FLHX and FLHXXX models. Kit includes passing lamp housings, retaining rings, chrome mounting brackets, auxiliary lamp switch and hardware. Auxiliary Lamp Bulbs and Bullet Turn Signal Kits sold separately.
MSRP US $299.95

But, you also need turn signals, sold separately, of course. All in all, the parts were about $520. My mechanic at the dealer said it was a relatively easy install, but I don't have separate quote for the labor on this one item.

The switch is already installed in the fairing cap. There is an extra one just for the lights.

fxstbharley2008 · « **Reply #23 on:** September 08, 2009, 11:01:09 AM »

Flanders bars with 2" more pullback and 2" taller (then rotated back for a bit more reach and to clear the mirrors).

Did you have to put on new cables and wires for those Falnders Bars?

StrahDawg · « **Reply #24 on:** September 08, 2009, 12:41:26 PM »

Sweet mods nice job.

michaelbmenaker · « **Reply #25 on:** September 08, 2009, 12:50:02 PM »

Re the Flanders Bars.
No, it didn't require new cables.
I rotated them back and down to give me a clear view with the fairing mounted rearview mirrors. Works for me...

Moodman · « **Reply #26 on:** September 09, 2009, 07:41:54 AM »

Couple of questions on the Flanders bars:

-What is the part#
-Did they come with the hole for the concealed wires
-Did you have to replace the left grip

Moodman

michaelbmenaker · « **Reply #27 on:** September 09, 2009, 04:18:31 PM »

Quote from: Moodman on September 09, 2009, 07:41:54 AM

Couple of questions on the Flanders bars:

-What is the part#
-Did they come with the hole for the concealed wires
-Did you have to replace the left grip

Moodman

Here's a link to the webpage for the bars http://www.sideroadcycles.com/AmericanMotorcycles/Handlebars/More_HD/F1UltraClassic2-2.html
Note that there are two parts #s...one is for pre-drilled for internal wiring
I wasn't charged for an extra grip by the dealer, so I presume the left grip was reused. Trust me, if he'd needed a new one, I would have been billed for it.

Old Harley Dude · « **Reply #28 on:** October 01, 2009, 10:50:31 AM »

$500 for the passenger floorboards?

? Seems to be a lot more than it should have been. What am I missing?

TIF2 · « **Reply #29 on:** October 01, 2009, 11:02:47 AM »

Quote from: Old Harley Dude on October 01, 2009, 10:50:31 AM

$500 for the passenger floorboards?? Seems to be a lot more than it should have been. What am I missing?

These are the stock replacement parts from an Ultra and not in the P&A book. They really put it to you on replacement parts but until (if) they come out with the "Rumble" line as a P&A listing ... it's the only option to have a matched set with the front (that I know of).

11 · « **Reply #30 on:** October 05, 2009, 08:57:46 PM »

$218 for the pass floorboard inserts, $369 for the mounts, then $159 for the floorboard chrome covers + pins, spring and balls. Seems to add up to a lot more than $500. If you pay retail it is closer to $800 with tax. Jenni @ Tri-County will save you 20%.

Old Harley Dude · « **Reply #31 on:** October 06, 2009, 09:28:13 AM »

Think I'll wait on this. Way too much.

Wheelsnkeels · « **Reply #32 on:** December 08, 2009, 07:52:40 PM »

You can use the stock Streamliner kit from an FLHX and add the Rumble inserts
Assy Rumble Footboard, Psngr (insert) 51510-09 MSRP - $109.09 each
Assy Rumble Footboard, Psngr (insert) 51502-09

HD Streamliner Passenger Footboard kit Chrome Kit 50378-07A $315.00

My dealer threw the kit in with the bike but they didnt have the Rumble part numbers I had to add those after delivery

WestCoastRuss · « **Reply #33 on:** December 08, 2009, 08:16:23 PM »

Not making it easy on the rest of us......My sweetie sees your bike and I am dead meat..........

CVOTequila · « **Reply #34 on:** December 08, 2009, 09:47:05 PM »

Wheels-

I have seen the correct foot boards on the '10 CVO electra glides....however my dealer won't appease me and take them off to swap them with my bike!!!! They are the matching ones for the footboards on our bikes.....but the streamliner is not exact is it?

Wheelsnkeels · « **Reply #35 on:** December 08, 2009, 09:50:51 PM »

Quote from: CVOTequila on December 08, 2009, 09:47:05 PM

Wheels-

I have seen the correct foot boards on the '10 CVO electra glides....however my dealer won't appease me and take them off to swap them with my bike!!!! They are the matching ones for the footboards on our bikes.....but the streamliner is not exact is it?

The streamliner is identical in shape and hardware with the exception of the inserts the part numbers above install in the streamliners with 2 allen screws for an exact match.

The chrome covers come in smooth or grooved with a bar and shield.
Mine are smooth

CVOTequila · « **Reply #36 on:** December 09, 2009, 10:03:16 AM »

Quote from: Wheelsnkeels on December 08, 2009, 09:50:51 PM

The streamliner is identical in shape and hardware with the exception of the inserts the part numbers above install in the streamliners with 2 allen screws for an exact match.

The chrome covers come in smooth or grooved with a bar and shield.
Mine are smooth

Yeah those look pretty good I guess I am going to have to upgrade for the wife!!! Those parts are just ridiculously expensive.....H-D= Hundreds of Dollars!!

Wheelsnkeels · « **Reply #37 on:** December 09, 2009, 10:13:28 AM »

Quote from: CVOTequila on December 09, 2009, 10:03:16 AM

Yeah those look pretty good I guess I am going to have to upgrade for the wife!!! Those parts are just ridiculously expensive.....H-D= Hundreds of Dollars!!

The price is absolutely ridiculous but its a small price to pay to stop the loud squeeling noise in my right ear? Only seems to happen 2-up go figure

CVOTequila · « **Reply #38 on:** December 09, 2009, 10:49:38 AM »

Quote from: Wheelsnkeels on December 09, 2009, 10:13:28 AM

The price is absolutely ridiculous but its a small price to pay to stop the loud squueling noise in my right ear? Only seems to happen 2-up go figure

Yeah I have a similar problem, that is why I am getting those Duals installed, I figure it will block the sound out a bit!

Raza51 · « **Reply #39 on:** December 10, 2009, 07:33:51 AM »

I feel your pain, heard someone say " The bike is only a down payment for the parts" something like that. Yea I bought the passenger boards for the wife also....but then she likes to ride more than I do....AND I ABSOLUTELY LOVE IT...she rides in the cold, hot, rain,
Ride safe bro's

LarryB · « **Reply #40 on:** December 10, 2009, 07:39:44 AM »

may I suggest, the accessory that really helps stop unwanted noises, squeals, et al, buy another bike and sign her up for the BRC. It really helped me and I find that 1 mod on her bike = 2 mods on mine. price doesn't count.
and you get to get one of those really cool solo seats

WFP · « **Reply #41 on:** December 10, 2009, 07:41:30 AM »

I too have spoiled the bsr with the ultra and all it's luxuries...since adding the SESG, all I hear is that the footpegs are a pain and the backrest is too low.

Funny, when on the back of the Deuce, with its too low backrest and footpegs, I never hear the same complaining...maybe the V&H Big Radius have something to do about that!

/Bill

I will be ordering the streamliners this winter

CVOTequila · « **Reply #42 on:** December 10, 2009, 11:00:42 AM »

Larry-

That is one hellava road glide great job with it!

Highjagger · « **Reply #43 on:** December 10, 2009, 01:59:59 PM »

very nice

Wheelsnkeels · « **Reply #44 on:** December 10, 2009, 02:02:44 PM »

Quote from: WFP on December 10, 2009, 07:41:30 AM

I too have spoiled the bsr with the ultra and all it's luxuries...since adding the SESG, all I hear is that the footpegs are a pain and the backrest is too low.

Funny, when on the back of the Deuce, with its too low backrest and footpegs, I never hear the same complaining...maybe the V&H Big Radius have something to do about that!

/Bill

I will be ordering the streamliners this winter

No I had the Big Radius on my Softail and everyone loved it except the YL. V&H foolishy made the pipe so the right passenger peg had to be raised 2"
No real reason plenty of clearance.

Any way they looked so cool I just listend to the squeel about my "feet are uneven"

Eventually I fabricated and chromed a footboard mount with a Radius around the pipe!

CVOTequila · « **Reply #45 on:** December 10, 2009, 02:56:44 PM »

those pipes are awesome

Wheelsnkeels · « **Reply #46 on:** December 10, 2009, 06:20:31 PM »

Quote from: CVOTequila on December 10, 2009, 02:56:44 PM

those pipes are awesome

I'll bet you figured out I kinda like Large pipes

Did you notice my 07 had Tequila Flames

Invisible68 · « **Reply #47 on:** December 10, 2009, 09:24:52 PM »

Quote from: LarryB on December 10, 2009, 07:39:44 AM

may I suggest, the accessory that really helps stop unwanted noises, squeals, et al, buy another bike and sign her up for the BRC. It really helped me and I find that 1 mod on her bike = 2 mods on mine. price doesn't count.
and you get to get one of those really cool solo seats

That is one sweet bike... love the colors....

CVOTequila · « **Reply #48 on:** December 10, 2009, 09:34:04 PM »

Quote from: Wheelsnkeels on December 10, 2009, 06:20:31 PM

I'll bet you figured out I kinda like Large pipes

Did you notice my 07 had Tequila Flames

Yeah the boom cans are pretty big also,

the paint is top notch

Wheelsnkeels · « **Reply #49 on:** December 26, 2009, 06:45:04 PM »

Went out to the Garage yesterday and installed my new Riders Claw for Iphone. (Thanks Honey

)

Killed me to put the cover back on getting it before winter might have been an error in judgement?

I don't remember having cabin fever this early before

I need to move to a warmer climate!

Highjagger · « **Reply #50 on:** December 27, 2009, 03:07:28 AM »

Quote from: Wheelsnkeels on December 26, 2009, 06:45:04 PM

Went out to the Garage yesterday and installed my new Riders Claw for Iphone. (Thanks Honey )

Killed me to put the cover back on getting it before winter might have been an error in judgement?

I don't remember having cabin fever this early before

I need to move to a warmer climate!

That`s exactly what i allways have in my mind in winter times . Again and again .

2010spicedrum · « **Reply #51 on:** December 27, 2009, 01:17:09 PM »

Where can I find the Riders claw for the I phone and how much do they go for? Are there any site sponsors here that sell them? Thanks.

Fired00d · « **Reply #52 on:** December 27, 2009, 01:26:04 PM »

Quote from: 2010spicedrum on December 27, 2009, 01:17:09 PM

Where can I find the Riders claw for the I phone and how much do they go for? Are there any site sponsors here that sell them? Thanks.

RIDER'S CLAW Ipod Mount....

Ride Safe,
Fired00d

Chains · « **Reply #53 on:** December 27, 2009, 01:42:15 PM »

Classy ride, done very well, great job, love the color.

Wheelsnkeels · « **Reply #54 on:** December 27, 2009, 03:58:17 PM »

Quote from: 2010spicedrum on December 27, 2009, 01:17:09 PM

Where can I find the Riders claw for the I phone and how much do they go for? Are there any site sponsors here that sell them? Thanks.

Got it here no discount though
http://www.ridersclaw.com/

CVOTequila · « **Reply #55 on:** December 27, 2009, 04:21:14 PM »

Quote from: Wheelsnkeels on December 27, 2009, 03:58:17 PM

Got it here no discount though
http://www.ridersclaw.com/

I just emailed them and they sent me a check with a rebate for the CVO discount.

2010spicedrum · « **Reply #56 on:** December 27, 2009, 04:25:11 PM »

Thanks for the help. I just ordered 1 from there web site.

CVOTequila · « **Reply #57 on:** December 27, 2009, 05:21:10 PM »

Quote from: 2010spicedrum on December 27, 2009, 04:25:11 PM

Thanks for the help. I just ordered 1 from there web site.

You will really like their product it is top notch!!!

Author Topic: FLHXSE w/Accessories (Read 11865 times)