Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Mr. We]

Hi all, I'm new to the chat, not the riding tho. I have the 04 Black and Blue - Plate says HDEMUP. I run the Hookers and love the performance and sound, but I'm feeling the "Crossover Blues." I keep toying with the 2 into 1 set up but I also like two pipes on a bagger. I just picked up the 05 Candy Red for my baby yesterday and now I'm thinking pipes. Our dealership has 20% off V&H tomorrow and we're looking at the oval, true dual set up. Anyone tried that set-up and wanna pony up some words of wisdom?

[onevtwinlover]

Check out the Freedom Pipe thread.........

[BLM777]

I've used V&H exhaust on several scoots over the years and found them to be good quality, but got into Rinehart Headers from BUB on the past 4 or 5.  Since installing my last set, some of the "in the know" contributors to this site introduced us to the modified Rinehart's from Freedom Cycles in Reno.  Many of my riding buddies have since ordered them and I can really say they take the Rinehart's to even a higher level of satisfaction.  Stock or Freedom modified I don't think you can do better that Rineharts for performance, sound and durability in a true dual header.  If you haven't heard a set on a properly tuned 103, you should, as it is indeed a wonderful sound!!!! [smiley=xyxthumbs.gif]

[MAS]

Our dealership has 20% off V&H tomorrow and we're looking at the oval, true dual set up. Anyone tried that set-up and wanna pony up some words of wisdom?

WeCVO,

I am running the V&H true duals with modified SE performance mufflers. Fitment and quality is great and I am happy with the setup.

[mr_magoo]

Modified mufflers?  Did you change baffles?  Or modify the stock ones?

[MAS]

Modified mufflers?

[Electra Glide Pete]

MAS,

How do you replace the 2005 FLHTCSE2 Electra Glide's Screamin' Eagle stock muffler baffles?
Is it something that the dealer has to do, or can it be done at home?

Electraglide Pete

Magoo,

I replaced the stock baffles with Kerker Mikuni baffles.

[MAS]

MAS,

How do you replace the 2005 FLHTCSE2 Electra Glide's Screamin' Eagle stock muffler baffles?
Is it something that the dealer has to do, or can it be done at home?

The mufflers I changed the baffles in were the SE two piece performance mufflers part #65115-98B. The stock mufflers are the touring mufflers and I am not sure if you can replace the baffles in them. The baffles in the SE two piece mufflers come out after you remove the end cap. You can either pull them out from the rear or knock them out from the front.

[Mr. We]

You should talk with V&H about that first,

[geezerglide]

Everyone,

I have used the V&H Pro Pipe on various EG's, I never had any problems with the pipes, had them on 88s and 95s. I do not mind the look on 2:1s on Deckers (baggers for the Americans).

Have also used the V&H True Dual set up c/w V&H Slip Ons on current Road Glide. Will probably change to Rineharts or RB Racing 2:1 Black Hole if can afford.

This exhaust will be going on a built  04 SE  103" Engine. Only changes Reworked Heads by SBC, Andrews TW55G and Baker DDS 6 Speed. Will see how that sounds and goes.

geezerglide

[ggraves427]

I have the D&D performance 2 into 1 with fake left side. They are made in Fort Worth TX.  I am completely satisfied with the fit, quality and sound.

[ratrbridin]

I agree 100% w/ hotlineguy.  I just got my '05 Cherry SEEG. We did a complete top end rebuild....103 pro+ pistons & heads, 264 cams roller rockers/supports, pushrods, kuryakyn pro series hypercharger intake and used a D&D "Borzilla" 2-1 to finish it off. Fantastic performance pipe and I was very impressed w/ the look. The rear header has a very dramatic "s" similar to a Bassani, and this thing screams power. Very deep roar and no flat spots in torque going up through the gears. This is my second D&D 2-1. Had one on a '00 FLSTC and was very pleased after trying and replacing three other sets, including V&H straight shots and a V&H 2-1. Drop the 7 bills, you won't be sorry. Just my 2 cents worth.

[NYChog]

Hi all,

I just installed the rhinehart  pipes on my 05 EG and I see that they also sell quiet baffles.  Does anyone know if you have to remap the powercommander when you change the baffles?  I also wanted to change the end caps, I like the fishtail end caps, is it possible to put them on these pipes?

Thanks.

[Elvis]

I've used V&H exhaust on several scoots over the years and found them to be good quality, but got into Rinehart Headers from BUB on the past 4 or 5.

[MAVERICK]

Has anyone tried the Hooker tuned flow 2 into 1 exhaust? If you did what kind of results did you have?