www.CVOHARLEY.com
CVO Technical => Electronic Toys and Gadgets => Topic started by: 09S/E roadglide on July 06, 2009, 04:01:49 PM
-
well I finally did it it really wasn't that bad. I'm still waiting to hear from one of our brothers about some speaker adaptors so i bought some cheap 5 1/4 to get me by. I got the install kit from hogwired and their OEM wire adaptor. alpine x-100 marine headunit added xm and a ipod jack in the pocket with a small alpine amp 4 x45 and I'm only using 1/2 of till i install the tour pack w/ speakers here is a few pics.... :2vrolijk_21:
-
#2
-
#3
-
I painted the kit spacer and the radio trim ring in case you were wondering !!
-
Looks great :2vrolijk_21:
-
I haven't been here long....but I do know when you take a picture Larry B is right there looking at everything you have laying around and will question you about it.
Is there something you aren't telling us Larry???
Good job on the stereo, you never did say how it sounds??
-
Sounds good now Im waiting for a speaker mod that will put larger speakers in the stock locations then It will rock.
-
Do the controls on the handlebar still work to control the radio?
-
Do the controls on the handlebar still work to control the radio?
Yes all of them and the ipod. with the hogwired adapt.
-
looks really great,,, the Hawg Wired guys are great to work with too.. you picked out the right guys to help you along.
-
Very nice job!
-
I used the rockin rings from street star designs (loud lids) i installed 6 1/2's in my 09 serg. i have the same hawg wired adaptor with a kenwood head unit. also have the hawg wired direct connect amp. bike sounds great. You will have to modify the original speaker mounts. i merely ground down the mounting positions to make the rockin ring sit flat against the stock mount. after attaching the rocking ring to the stock mount. i mounted the 6 1/2 inch speakers. didnt take long to do. i just got my serg , i pulled all of my stereo stuff out of my 06 flhx street glide.