Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[zook4life]

New 2015 Road Glide CVO with only about 600 miles in (due to weather) when my radio crapped out. Currently not able to get any sound/music from the radio unless bike is parked and in accessory mode. As soon as i start the bike and/or move with engine running music stops. Checked firmware and is up to date. Scheduled appointment already but just sucks to ride with no tunes. Any thoughts?

[vinver]

Have you tried resetting the stereo?

Boombox Infotainment reset proces

To enter the service menu:

1) Turn ignition off and wait 15 seconds
2) Press and hold power/mute button.  Turn ignition to accessory.
3) Continue to press power button for 2 seconds after warning screen is displayed.
4) Release power/mute button and accept warning

The service menu will display the following options:

1)  DTCS
2)  Audio  a) EG (serves no purpose)  b) Speaker test(s)
3)  Display  (test the LCD display briteness and color consistency)
4)  Key input   (test the faceplate hard keys, handlebar switches, and passenger controls)
4)  Component menus (XM and Satellite Digital Audio Radio Service)
     a)  Module version-displays the XM versions
     b)  Subscription info
     c)  Signal status
     d)  XM antenna state (unsupported, detected, not detected, short, and unknown)
     e)  Tone generation  (allows for generating left or right audio tone generated by the xm
          module)
     f)   Navigation setting (no diagnostic value)
     g)  GPS status (displays a graphical representation of GPS satellite position&signal strength)
     H)  Tuner-displays the current frequency, signal strength, RDS/RBDS info for each tuner.   
          If the signal is unavailabe or out of range, the display may show dashes instead of a   
          value.
     I)   Compass indicates current direction
5)  Version information (sub menus show navigation and database versions but offer no diagnostic
     help.
6)  Reset
     a)  Precalibration reset-restores factory settings-recommended when there are no problems or
          DTCS..
     b)  Post calibration save-Archives customer settings after post calibration reset
     c)  Post calibration reset-Resets radio default settings and restores customer data stored in
          post calibration save
     d)  Privacy reset-clears private data (phone pairing, phone #'s, presets, navi history)
7)  Touchscreen Calibration 6.5 only
     Calibrate the touchscreen by pressing the center of the displayed target.  The target moves
     to a new location on the screen after each press for a total of 3 presses.  Press accept
     for the calibration to update.

[AMEDD_SFC]

Turn on ignition.
Wait until warning comes on.  Press Accept, then start bike.

Mine would consistently cut out on start unless I waited to clear the warning while in ignition-on mode.

This is a PITA, but it works for me.

M

[phantomxrt]

Turn on ignition.
Wait until warning comes on.  Press Accept, then start bike.

Mine would consistently cut out on start unless I waited to clear the warning while in ignition-on mode.

This is a PITA, but it works for me.

M

Thank you. Mine clips periodically. I'll try this and see if it makes a difference.