Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: 2014 SERK - relocate turn signals  (Read 2705 times)

0 Members and 1 Guest are viewing this topic.

Fayston

  • Newbie
  • *
  • Offline Offline
  • Posts: 7
2014 SERK - relocate turn signals
« on: June 10, 2018, 11:57:57 PM »

Hi guys, want to relocate the turn signals from the handlebars to the sides of the nacelle (similar to the Street Glide).  With either an aftermarket piece from Alloy Art, or maybe the Street Glide kit.  Wondering how easy/hard this is.

Thanks in advance for the help, Fayston
Logged
'14 FLHRSE
'88 FXRS
'94 Sporty

GKroadking

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 295
  • www.CVOHARLEY.com


    • CVO1: CVO Road King 2014 (FLHRSE6) sold
    • CVO2: CVO Street Glide 2021 (FLHXSE)
Re: 2014 SERK - relocate turn signals
« Reply #1 on: June 11, 2018, 04:56:00 AM »

Did use that on my SERK:

Custom Auxiliary Lighting Kit #Part Number 67800367

Best what you can get  :coolblue:
Logged
CVO Street Glide 2021
FLHXSE
Sunset Orange & Sunset Black Fade
Jekill & Hyde Exhaust
http://jekillandhyde.com/en_US/our-technique
131cui

SneakyPete

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1608
  • AKA FGL
    • VA


    • CVO1: 2004 SEEG O/B- RIP
    • CVO2: 2009 SERG3 O/B
    • CVO3: 2014 SERK6 O/B
Re: 2014 SERK - relocate turn signals
« Reply #2 on: June 11, 2018, 07:13:25 AM »

These are from HD and fit the SERK.  The Street Glide pieces won’t fit a Road King.
Logged
Member Hillbilly Rocket Riders MC, Virginia THE FASTEST CHAPTER!

FLSTFI Dave

  • IBA 69147
  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 6709

    • CVO1: 2023 FLTRXSE Whiskey Neat
    • CVO2: 2021 RA1250S Pan America Special
    • CVO3: 2003 Fatboy, 95"quot, S&ampS 570 gear drive cam
Re: 2014 SERK - relocate turn signals
« Reply #3 on: June 11, 2018, 08:22:58 AM »

I did the same as Sneaky Pete on my 13 King.  Nice and clean looking.
Logged
2023 FLTRXSE Whiskey Neat
2021 RA1250S Pan America Special
2019 FLTRXSE Red Pepper / Magnetic Gray Traded
2018 FLTRXSE Gunship Gray  Traded
2017 FLHXSE  Starfire Black / Atomic Red  Traded
2015 FLTRUSE Abyss Blue / Crushed Saphire Traded
2013 FLHRSE5 Diamond Dust 117  Traded
2012 FLTRXSE White Gold Pearl / Starfire Black  Traded
2009 FLTRSE3 Silver/Titanium  Traded
2003 Fatboy, real fire paint set,

Fayston

  • Newbie
  • *
  • Offline Offline
  • Posts: 7
Re: 2014 SERK - relocate turn signals
« Reply #4 on: June 11, 2018, 03:01:18 PM »

Thanks GK.  Saw that kit, not looking for the passing lamps though.

Sneaky Pete - do you have the part number for that kit, and did you do the install yourself?  Wondering if this is a pretty simple move, or if there's anything complicated.  Thanks.
Logged
'14 FLHRSE
'88 FXRS
'94 Sporty

SneakyPete

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1608
  • AKA FGL
    • VA


    • CVO1: 2004 SEEG O/B- RIP
    • CVO2: 2009 SERG3 O/B
    • CVO3: 2014 SERK6 O/B
Re: 2014 SERK - relocate turn signals
« Reply #5 on: June 11, 2018, 03:53:30 PM »

PN 69577-06A, very simple to install, just follow instructions
Logged
Member Hillbilly Rocket Riders MC, Virginia THE FASTEST CHAPTER!

Fayston

  • Newbie
  • *
  • Offline Offline
  • Posts: 7
Re: 2014 SERK - relocate turn signals
« Reply #6 on: June 12, 2018, 12:09:21 AM »

Thanks for the help - greatly appreciated!
Logged
'14 FLHRSE
'88 FXRS
'94 Sporty

Mutt

  • Newbie
  • *
  • Offline Offline
  • Posts: 32
  • www.CVOHARLEY.com
    • GA

Re: 2014 SERK - relocate turn signals
« Reply #7 on: July 01, 2018, 11:12:49 AM »

The bolts holding the rubber mounts to the side of the bike are 5/16x18. I went to Ace with one of the turn signals, and removed the ball mount from the signal. The thread there is 5/16x24. I was hoping to get a piece of all thread if the thread patterns were the same.

What I ended up finding was stud bolts, course 5/16x18 on one side and fine 5/16x24 on the other side. Removed the existing bolt holding the bottom rubber mount, screwed the new bolt stud in, used 2 nuts to tighten it, then added the washer, a 3/8 spacer and just screwed the turn signal onto the mount. No extra mounts needed, no holes to drill.
Logged

Vibe27

  • Newbie
  • *
  • Offline Offline
  • Posts: 3
  • www.CVOHARLEY.com
    • QC

Re: 2014 SERK - relocate turn signals
« Reply #8 on: December 28, 2018, 01:57:05 PM »

The bolts holding the rubber mounts to the side of the bike are 5/16x18. I went to Ace with one of the turn signals, and removed the ball mount from the signal. The thread there is 5/16x24. I was hoping to get a piece of all thread if the thread patterns were the same.

What I ended up finding was stud bolts, course 5/16x18 on one side and fine 5/16x24 on the other side. Removed the existing bolt holding the bottom rubber mount, screwed the new bolt stud in, used 2 nuts to tighten it, then added the washer, a 3/8 spacer and just screwed the turn signal onto the mount. No extra mounts needed, no holes to drill.
Hi, do you have pictures ? Thank you
Logged

Twolanerider

  • 25K CVO Member
  • *****
  • Online Online
  • Posts: 50536
  • EBCM #1.5 Emeritus DSP # ? Critter Gawker #?
    • MO


    • CVO1: 2000 Triple Red Screamin' Eagle Road Glide
    • CVO2: 2002 Candy Brandywine Screamin' Eagle Road King
    • CVO3: 1999 Arresting Red FXR2
Re: 2014 SERK - relocate turn signals
« Reply #9 on: December 28, 2018, 10:03:01 PM »

Built my old Road King that way (with the FLHX style signals and nothing on the bars).  Much prefer it.  Cheap parts if all you want is turn signals.  You can do it with or without spotlights. 

If with spotlights the similar option to the FLHX mount is what the later touring models ran.  Even though I had that on my SEEG I was never a big fan of the big spot lights.  On my Road King did it with a HeadWinds mount and smaller spots.  Still butt tons of light when accompanied by a good LED headlight.

Logged
 

Page created in 0.257 seconds with 22 queries.