www.CVOHARLEY.com

Custom Vehicle Discussions => 2001 FXDWG2/2002 FXDWG3 => Topic started by: KLars1 on December 17, 2005, 03:38:56 AM

Title: Stock Handlebar replacement - 1 1/4"
Post by: KLars1 on December 17, 2005, 03:38:56 AM

Hi All,

I purchased a FXDWG3 about a month ago.  I love the bike!!  I'll post some pictures soon of my bike. [smiley=banana.gif] This website should be a great place to discuss FXDWG3 specific content.

Anyway, I love most things that came stock on the FXDWG3.  However, one thing I want to change is the handlebars.  I like the set-up of the stockers with respect to rise, pullback, and width....I like the position they put you in.  However, I want to go to a 1 1/4" bar with an internal wiring set-up.

So, what I'm looking for is something very close to the stock bar but 1 1/4" or possibly 1 1/2".  Anyone have any suggestions?  I saw the picture of Buffy's Carlini Clean Sweeps and they look nice, but I'm looking so something that emulates the stock bar profile.

I checked out Drag Specialities and J&P but didn't see anything that was real close.  But, then again, I don't find it real easy to accurately measure the stock width, rise, and pullback on the bar fully installed on the  bike.

Any suggestions would be great.

Kevin

Title: Re: Stock Handlebar replacement - 1 1/4"
Post by: naitram on December 17, 2005, 09:21:13 AM

not sure if this is the same as stock profile or not;

http://www.wild1inc.com/wo500b.html

quite a few guys here run wild-1 bard and have been very happy with them

Title: Re: Stock Handlebar replacement - 1 1/4"
Post by: KLars1 on December 17, 2005, 11:52:05 AM

Thanks for the link...I always like to see pics of WG2/3.