Build details:
2016 FXSE CVO Pro Street Breakout
19,206 miles
125.04 HP / 134.99 TQ SAE
HD 92500054 Black 117” Street Performance Kit
Cylinders, 9.9:1 flat top pistons and rings, 58mm Throttle Body, 5.3 fuel injectors, roller tappets, inner cam bearing, gaskets
- Did not use: SE-259E cams, Perfect fit pushrods, head gaskets
T-Man Performance 590PS-2 Cams
S&S TC3 Oil Pump Kit and Cam Support Plate (Blue)
S&S Cam Chain Tensioner
Fuel Moto EZ Adjustable Pushrods
HD Street Performance Head Job
Cometic 0.030” head gaskets
Conical Valve Springs .635 lift
HD 18190-08 oversized 2.120” valves
HDSP slow bleed/limited travel lifters
My CVO Heads
Front milled 0.041” to 90cc
Rear milled 0.042” to 90cc
10.74:1 static compression
43 degree intake close ABDC
9.76:1 corrected compression
205.4 cold cranking compression @ sea-level
187.9 cold cranking compression @ 3,000 ft elevation (where I live/ride)
Don helped me pre-build to get everything figured out, and suffered my lack of knowledge like a true gentleman.
Sent me pics along the way to show me what was being done, worked directly with YHD to facilitate the work and shipping, and also provided flow charts to YHD with my parts. Well done Sir. I’m glad I brought you into the project. Thank you!
Dynojet Power Vision Tuner
Thunderheader 1067B 2-1 exhaust
OilBud oil cooler
Flo Oil Filter
Hawg Halters 6 piston dual front brake calipers
Galfer Cubiq front 13” oversized brake rotors
Galfer Cubiq rear 12” oversized brake rotor
Galfer ceramic brake pads
McGinley Motorsports, Bozeman, MT.
Brett Fixed dent in left side of tank and took my hand drawn designs and did all the paint and ceramic coating on budget.
Good man to work with!
Yellowstone Harley Davidson, Belgrade, MT.
Did all the coordinating, purchasing, tear down/building, tuning, test riding, and customer satisfying…
Daniel Chance is the parts guy who worked with me from beginning to end, and made everything I asked for happen.
Trav is the mechanic and tuner that did all the heavy lifting. These guys kick ass.
I’m happy, and I am going to pick up the bike on Friday. I can’t wait to ride!