Topic: Recommendations For Highway Peg Mounts (Read 1038 times)

jjohn581 · « **on:** August 03, 2011, 06:34:52 PM »

I am looking to mount highway pegs on a FLSTSE2 with a mustache bar and am looking for recommendations for the mounts. I did a forum search and there seems to be many different opinions. There are offsets, 360 rotating, angled, straight etc mounts. I will be using rumble pegs and am 5'9" with a 30" inseam.

brr5 · « **Reply #1 on:** August 05, 2011, 05:15:06 PM »

These are the ones I am using H-D# 50957-02B
I am about the same size and inseam and they work great.
These are the pegs I am using
http://brr5.home.bresnan.net/50131_95_M_8230.jpg

bobne · « **Reply #2 on:** August 30, 2011, 08:18:36 AM »

What kind of engine guards, or highway peg mounts do you have?

I just tried two different sets of Kuryakyn Adjustable mustache bars on my 2010. On both the bolt holes on the pieces were completely rusted and were not usable - the threads where shot, and couldn't get a bolt threaded. I talked to their customer service two different times and they didn't seemed to care very much so I'm looking for a different solution to mount highway pegs.

jjohn581 · « **Reply #3 on:** August 30, 2011, 10:52:23 AM »

My 2011 conv. already had a HD Moustache Guard on it when I bought it. It looks good on it and the top foot rests work OK, but am still looking for the right mount to put some pegs on it.

Author Topic: Recommendations For Highway Peg Mounts (Read 1038 times)

jjohn581

Recommendations For Highway Peg Mounts

brr5

Re: Recommendations For Highway Peg Mounts

bobne

Re: Recommendations For Highway Peg Mounts

jjohn581

Re: Recommendations For Highway Peg Mounts