www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 2 [3] 4 5  All

Author Topic: 2011 FLHXSE2 License Plate Options  (Read 18456 times)

0 Members and 1 Guest are viewing this topic.

Mano

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4331
    • ON


    • CVO1: 2011 FLHXSE2
Re: 2011 FLHXSE2 License Plate Options
« Reply #30 on: November 21, 2010, 08:51:48 PM »
Quote from: Mano on November 21, 2010, 06:18:15 PM
Hello Mano!
 
Ok here we go...
 
Yes it will bold on to a 2011 But No there is no adaptor.  Also, We have that on back order till Jan 2011. 
I can put your name on the list so when it becomes available your in line...
 
Please let me know.
 
Thank you,
 
Phil Locke
Paul Yaffe Originals / Bagger Nation
2211 East Indian School Road
Phoenix, AZ 85016
plocke@paulyaffeoriginals.com
602-840-4205 x221
602-840-2569 FAX
www.paulyaffeoriginals.com
www.baggernation.com


This is the answer I receiver....looks like the original plug must be cut and sliced and connected :nervous:.

Whoops...........RECEIVED.............This is what happens when you are watching football with a laptop....lol.
Logged

Sierramadre

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 537
  • "Badges? We don't need no stinkin' badges!"
Re: 2011 FLHXSE2 License Plate Options
« Reply #31 on: November 22, 2010, 06:37:56 AM »
My version...
Logged

RK2K

  • Newbie
  • *
  • Offline Offline
  • Posts: 26

    • CVO1: 2011 FLHXSE2 Black Diamond
Re: 2011 FLHXSE2 License Plate Options
« Reply #32 on: December 07, 2010, 12:43:30 PM »
Kuryakyn 9182
Logged
Kuryakyn Crusher Duals
CFR Slipons
TTI Mastertune

SID8D2

  • Keep the Shinny Side Up
  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 272
  • Let's Ride, Winter in the Midwest Sucks!!!!

    • CVO1: 2004 FLHTCSE Black & Blue
    • CVO2: 2009 FLTRSE3 Orange & Black - Spooky
Re: 2011 FLHXSE2 License Plate Options
« Reply #33 on: December 07, 2010, 09:04:42 PM »
Loose the light and drill holes and mount it to the fender looks best IMHO.
« Last Edit: December 07, 2010, 09:06:23 PM by SID8D2 »
Logged
2009 Road Glide FLTRSE3 110ci;
Fullsac X-Pipe,
V&H Hi Output Mufflers,
Hawg Wired Dbl Shot,
Crank Welded, Trued, Balanced,
H-Beam Rods,
T-Man 110 Thumper Top End,
T-Man 662-2 Cams,
Woods Directional Lifters,
58mm SE Throttle Body,
TTS Mastertune, 
LePera Daddy Long Legs Seat, 
[img]http://www.cvoharley.com/smf/index.php?action=dlattach;topic=4094.0;attach=138042;image[/i

SID8D2

  • Keep the Shinny Side Up
  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 272
  • Let's Ride, Winter in the Midwest Sucks!!!!

    • CVO1: 2004 FLHTCSE Black & Blue
    • CVO2: 2009 FLTRSE3 Orange & Black - Spooky
Re: 2011 FLHXSE2 License Plate Options
« Reply #34 on: December 07, 2010, 09:07:17 PM »
last one.
Logged
2009 Road Glide FLTRSE3 110ci;
Fullsac X-Pipe,
V&H Hi Output Mufflers,
Hawg Wired Dbl Shot,
Crank Welded, Trued, Balanced,
H-Beam Rods,
T-Man 110 Thumper Top End,
T-Man 662-2 Cams,
Woods Directional Lifters,
58mm SE Throttle Body,
TTS Mastertune, 
LePera Daddy Long Legs Seat, 
[img]http://www.cvoharley.com/smf/index.php?action=dlattach;topic=4094.0;attach=138042;image[/i

slamr

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 518

    • CVO1: 2021 Sunset Orange / Sunset Black Fade
    • CVO2: 2010 Concord FLHXSE - Sold
Re: 2011 FLHXSE2 License Plate Options
« Reply #35 on: December 07, 2010, 09:18:51 PM »
Quote from: SID8D2 on December 07, 2010, 09:04:42 PM
Loose the light and drill holes and mount it to the fender looks best IMHO.

Very nice!   :2vrolijk_21:  What material did you use between the plate bracket and fender?  I have the bracket but just need to install it this winter.   :drink:
Logged

RK2K

  • Newbie
  • *
  • Offline Offline
  • Posts: 26

    • CVO1: 2011 FLHXSE2 Black Diamond
Re: 2011 FLHXSE2 License Plate Options
« Reply #36 on: December 08, 2010, 11:06:21 AM »
I like the spacer between the frame and fender.  What did you use?
Logged
Kuryakyn Crusher Duals
CFR Slipons
TTI Mastertune

SID8D2

  • Keep the Shinny Side Up
  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 272
  • Let's Ride, Winter in the Midwest Sucks!!!!

    • CVO1: 2004 FLHTCSE Black & Blue
    • CVO2: 2009 FLTRSE3 Orange & Black - Spooky
Re: 2011 FLHXSE2 License Plate Options
« Reply #37 on: December 10, 2010, 06:20:11 PM »
Quote from: RK2K on December 08, 2010, 11:06:21 AM
I like the spacer between the frame and fender.  What did you use?

If you go to the SERG3 page there is a "how to" thread. The rubber molding you see around the plate frame was something I had left over from an Electra glide. It may have been the molding between the inner and outer fairing or molding from the gas tank console. You may be able to find molding at AutoZone too. May have to use a little heat gun to help curve it around the corners.

Hidden between the fender and the Michigan plate is a piece of rubber cut to suit (I used an old rubber car floor mat).

Also I used a couple "rubber 1/4" fender washers" where the (4) screws hold it all up against the fender.

    Turned out good, but I fought it for a few hrs till I was happy with it.

             :orange: :orange: :orange: :orange: :orange: :orange:
« Last Edit: December 10, 2010, 06:52:28 PM by SID8D2 »
Logged
2009 Road Glide FLTRSE3 110ci;
Fullsac X-Pipe,
V&H Hi Output Mufflers,
Hawg Wired Dbl Shot,
Crank Welded, Trued, Balanced,
H-Beam Rods,
T-Man 110 Thumper Top End,
T-Man 662-2 Cams,
Woods Directional Lifters,
58mm SE Throttle Body,
TTS Mastertune, 
LePera Daddy Long Legs Seat, 
[img]http://www.cvoharley.com/smf/index.php?action=dlattach;topic=4094.0;attach=138042;image[/i

fast96

  • Vendor
  • Elite CVO Member
  • *
  • Offline Offline
  • Posts: 515
    • AZ

    • CVO1: 2011 CVO Road Glide Ultra
    • CVO2: 2019 CVO Road Glide Mako Shark
Re: 2011 FLHXSE2 License Plate Options
« Reply #38 on: December 13, 2010, 03:49:50 PM »
Is there lights on it?
Logged
Any day Racin or Ridin is better than workin!

SID8D2

  • Keep the Shinny Side Up
  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 272
  • Let's Ride, Winter in the Midwest Sucks!!!!

    • CVO1: 2004 FLHTCSE Black & Blue
    • CVO2: 2009 FLTRSE3 Orange & Black - Spooky
Re: 2011 FLHXSE2 License Plate Options
« Reply #39 on: December 14, 2010, 08:22:23 PM »
Quote from: fast96 on December 13, 2010, 03:49:50 PM
Is there lights on it?

YUP, little LED lights on the top section shining down on the plate.
Logged
2009 Road Glide FLTRSE3 110ci;
Fullsac X-Pipe,
V&H Hi Output Mufflers,
Hawg Wired Dbl Shot,
Crank Welded, Trued, Balanced,
H-Beam Rods,
T-Man 110 Thumper Top End,
T-Man 662-2 Cams,
Woods Directional Lifters,
58mm SE Throttle Body,
TTS Mastertune, 
LePera Daddy Long Legs Seat, 
[img]http://www.cvoharley.com/smf/index.php?action=dlattach;topic=4094.0;attach=138042;image[/i

cwkcpa

  • Newbie
  • *
  • Offline Offline
  • Posts: 26
  • 11 CVO
Re: 2011 FLHXSE2 License Plate Options
« Reply #40 on: December 17, 2010, 08:25:40 AM »
 :) To mount the Kury 9182 on CVO Street Glide how many holes need to be drilled?
Logged

cwkcpa

  • Newbie
  • *
  • Offline Offline
  • Posts: 26
  • 11 CVO
Re: 2011 FLHXSE2 License Plate Options
« Reply #41 on: December 17, 2010, 08:49:28 AM »
 :) JW - Vanessa - how did the shop install it without drilling any new holes?  Thanks for the assist!  CWK
Logged

PierceEye

  • Living The Life In Florida
  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 274

    • CVO1: FLHTCUSE8-ANV
Re: 2011 FLHXSE2 License Plate Options
« Reply #42 on: December 17, 2010, 09:18:28 AM »
Quote from: SID8D2 on December 10, 2010, 06:20:11 PM
If you go to the SERG3 page there is a "how to" thread. The rubber molding you see around the plate frame was something I had left over from an Electra glide. It may have been the molding between the inner and outer fairing or molding from the gas tank console. You may be able to find molding at AutoZone too. May have to use a little heat gun to help curve it around the corners.

Hidden between the fender and the Michigan plate is a piece of rubber cut to suit (I used an old rubber car floor mat).

Also I used a couple "rubber 1/4" fender washers" where the (4) screws hold it all up against the fender.

    Turned out good, but I fought it for a few hrs till I was happy with it.

             :orange: :orange: :orange: :orange: :orange: :orange:


Hey SID do you Randy and Deb Lemmen from Holland?
I was born and raised there
Logged
FLHTCUSE8-Anv w/ Vance & Hines true dual Ovals
88.85hp & 109.33tq tuned with the SE Pro Super Tuner

cwkcpa

  • Newbie
  • *
  • Offline Offline
  • Posts: 26
  • 11 CVO
Re: 2011 FLHXSE2 License Plate Options
« Reply #43 on: December 17, 2010, 09:50:20 AM »
 :)  Thanks for the assist - CWK
Logged

Black Diamond

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 3363

    • CVO1: 11 FLHXSE2 "Vanessa"
    • CVO2: 08 FLHRSE4 "Lexi" "Bike from Hell"
    • CVO3: 02 FLHRSEI "Ruby"
Re: 2011 FLHXSE2 License Plate Options
« Reply #44 on: December 17, 2010, 10:43:17 AM »
Quote from: cwkcpa on December 17, 2010, 08:49:28 AM
:) JW - Vanessa - how did the shop install it without drilling any new holes?  Thanks for the assist!  CWK

Can't help you much with this but I went out a took a couple of pics of the mount from under the fender. HTH.
Logged
Pages: 1 2 [3] 4 5  All
« previous next »
 

Page created in 0.213 seconds with 22 queries.