Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 2 [3] 4  All

Author Topic: Looking for windscreen suggestions...  (Read 10176 times)

0 Members and 1 Guest are viewing this topic.

Hawg

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 855

    • CVO1: 2010 FLHXSE
Re: Looking for windscreen suggestions...
« Reply #30 on: May 23, 2010, 09:54:00 PM »

just another opinion, but I use two different clearview shields with the recurve. I like the 8" for local riding and the 9 1/2 inch for highway trips because of rain. They both work perfectly delivering the wind and rain "over" my helmet.

however, air coming from other directions were very annoying on the SG for me. So, I put the two adjustable wings on the side of the batwing, and installed the metal scoop between the forks that redirect the air downward. now it is like riding in a car. No rain or air when not wanted and better air flow if you open the wings and direct that fairing air flow towards you.

I do get an occasion scratch from rocks being thrown up, etc. but I bought the clearview kit which has three grades of scratch removal and polish ability. that stuff works wonders. I even used it to take the scratches out of a softail shield after dropping the stupid thing on a gravel road...
jb
do you have pics?
Logged
Hawg

GtreetSlide

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 509
Re: Looking for windscreen suggestions...
« Reply #31 on: May 24, 2010, 08:32:58 PM »

Trying to attach a photo
Logged

Fired00d

  • Global Moderator
  • 25K CVO Member
  • *****
  • Offline Offline
  • Posts: 32640
  • Orange & Black SEEG... Can it get any better?
    • VA


    • CVO1: FLHTCSE
Re: Looking for windscreen suggestions...
« Reply #32 on: May 24, 2010, 08:34:35 PM »

Trying to attach a photo
It worked. :2vrolijk_21: ;D

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Logged
:pumpkin: 2004 Screamin’ Eagle Electra Glide :pumpkin:
Rinehart True Duals
SE Breather
SE Race Tuner
HogTunes Speakers
Zippers 575 Gear Drive Cams
Zippers Pro-Tapered Adjustable Push Rods
Zippers Oil Pressure Bypass Shim
Feuling Oil Pump
Feuling Lifters
Zumo 550 W/Flame Caps
Lyndall Z+ Brake Pads
CVOHarley Member #1234
PGR Member #754 (Since '05)
Proud Member EBCM #2.0

GtreetSlide

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 509
Re: Looking for windscreen suggestions...
« Reply #33 on: May 24, 2010, 08:36:02 PM »

another
Logged

GtreetSlide

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 509
Re: Looking for windscreen suggestions...
« Reply #34 on: May 24, 2010, 08:43:04 PM »

from behind
Logged

CVOBros2

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 87

    • CVO1: 2010 FLHXSE SESG Tequila Sunrise
Re: Looking for windscreen suggestions...
« Reply #35 on: May 25, 2010, 02:21:50 PM »

Thanks for the suggestions everyone, I ended up getting a "Freedom Shield" from John at http://freedomshields.net he is offering a 15% off CVO Forum discount in the vendor section.  I posted some pics of my bike with the new shield on it here:

http://www.cvoharley.com/smf/index.php?topic=49103.0;all

Check them out!


Great quality product, great fit and finish, American made and awesome price and discount.  I can't say enough good things about John and his products!
Logged

Kevinski

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 217

    • CVO1: FLSTSE3 and lovin' it
    • CVO2: FLSTSE2 and loved it but sold it
    • CVO3: FLHXSE Tequila (sold)
Re: Looking for windscreen suggestions...
« Reply #36 on: May 26, 2010, 02:42:07 PM »

What size freedom did you go for?
Logged

CVOBros2

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 87

    • CVO1: 2010 FLHXSE SESG Tequila Sunrise
Re: Looking for windscreen suggestions...
« Reply #37 on: May 26, 2010, 10:33:27 PM »

I ended up getting the 7" Dark Grey...  there is a link on my previous post that shows some pics...   :coolblue:
Logged

Sea Biscuit

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 290
Re: Looking for windscreen suggestions...
« Reply #38 on: May 26, 2010, 11:24:20 PM »

Logged

Lucky88

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 175

    • CVO1: 2010 SESG Spiced Rum
    • CVO2: 2011 SESG Kryptonite/Black Diamond
    • CVO3: 2011.5 SEUC Twilight Blue/Candy Cobalt
Re: Looking for windscreen suggestions...
« Reply #39 on: May 27, 2010, 10:26:19 AM »

I ended up getting the 7" Dark Grey...  there is a link on my previous post that shows some pics...   :coolblue:

Did the buffetting go away with this shield? Is it better than the stock?
Logged
2004 Honda RVT1000-(RC51) still in crate
2004 BMW K1200RS - Go anywhere bike
2006 BMW GS Adventure special edition -still in crate
2009 BMW HP2 Sport  #1-w/ABS- still in crate
2010 CVO SESG- Spiced Rum- wants to come out to play
2011 BMW HP2 Sport - Waiting for a Motorsport Edition-wishful thinking
2011 CVO SESG- Kryptonite- Finally arrived 2-21-11
2011.5 CVO Ultra Classic- Blue or Red? ...BLUE! arrived 3-28-11

kevdon

  • Newbie
  • *
  • Offline Offline
  • Posts: 29
Re: Looking for windscreen suggestions...
« Reply #40 on: May 27, 2010, 06:00:51 PM »

just installed the 9 in. freedom shield on my ultra after trying 3 different shields from another sponsor. the freedom shield is definitely the superior windshield.  no wind or buffeting. would recommend it over any other one out there.
Logged

GtreetSlide

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 509
Re: Looking for windscreen suggestions...
« Reply #41 on: May 27, 2010, 10:33:00 PM »

I don't know if GtreetSlide replied to you Hawg, but I think he was referring to this:

http://www.harley-davidson.com/gma/gma_product.jsp?PRODUCT%3C%3Eprd_id=845524441845999&FOLDER%3C%3Efolder_id=2534374302290755&ASSORTMENT%3C%3East_id=2534374302290755&bmUID=1274930337950&bmLocale=en_US
:pepper: :cucumber: :apple: :orange: :2vrolijk_21:
Thanks. yes, that is the part. the parts guys told me it came on some bikes way back but they stopped installing them due to heat problems with the motors. He told me I should take it off when temps get high 90's but I have run it in 107 degree desert heat with no problems. Of course my bike is tuned to run cooler and I don't have lowers either. One thing I can say is that it really stops that updraft on my SG. If I want a breeze I just position the side wings to aim it back at me. All buffetting issues disappeared with the baffle, wings, and taller shield. Almost like being in a car with the windows closed. Also keeps most of the water off during rains as well..

jb
Logged

CVOBros2

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 87

    • CVO1: 2010 FLHXSE SESG Tequila Sunrise
Re: Looking for windscreen suggestions...
« Reply #42 on: May 27, 2010, 11:28:04 PM »

Hey GtreetSlide,

What seat do you have on your bike?  I would really like to change this stock CVO junk seat for something with more padding, taller and more passenger pillion.  That one looks good.

Thanks
Logged

Steve_G

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 827
  • FLHRSEI.ORG
    • SD


    • CVO1: 2006 FLHTUSE Watermelon (traded)
    • CVO2: 2008 FLHTUSE3 Anniversary (traded)
    • CVO3: 2022 FLHTKSE Hightail Yellow
Re: Looking for windscreen suggestions...
« Reply #43 on: June 09, 2010, 01:15:08 PM »

Has anyone tried the Vstream windshield from National Cycle?
Logged
If Noah had been truly wise, he would have swatted those two flies!

GtreetSlide

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 509
Re: Looking for windscreen suggestions...
« Reply #44 on: June 10, 2010, 07:12:00 PM »

Hey GtreetSlide,

What seat do you have on your bike?  I would really like to change this stock CVO junk seat for something with more padding, taller and more passenger pillion.  That one looks good.

Thanks

It's just a plain old HD Sundowner for SGs... Comfortable enough for me, the stock seat was like sitting on a board..

jb
Logged
Pages: 1 2 [3] 4  All
 

Page created in 0.162 seconds with 21 queries.