www.CVOHARLEY.com

Custom Vehicle Discussions => Screamin’ Eagle® Softail® Springer® => Topic started by: Zinister on September 13, 2009, 12:15:14 AM

Title: Has anyone had their bike dyno tuned with the stock pipes?
Post by: Zinister on September 13, 2009, 12:15:14 AM

Just looking for a comparison to V&H big radius 2-2

Also has anyone found improvements by changing the baffles or removing the cats from the stock pipes?

Title: Re: Has anyone had their bike dyno tuned with the stock pipes?
Post by: ice6900 on September 14, 2009, 04:12:01 AM

I am living in Switzerland so i have fitted the hi.flow air filter and had the dyno done with european stock pipes, (which are more restricted/quieter than your usa models) from a base of 65hp was upped to 86hp (only mod to the exhaust was to have the clapper valve permantly set in the open position), the tuner did try a dyno run with se pipes fitted just for comparison and attained 95hp.........

Title: Re: Has anyone had their bike dyno tuned with the stock pipes?
Post by: Zinister on September 14, 2009, 09:28:30 PM

Thanks for the info.

Going to talk to a local dealership about what he thinks is the best I can get with some mods to my stock pipes and a tune.