www.CVOHARLEY.com

CVO Technical => Twin Cam => Topic started by: LMR on September 06, 2017, 09:53:58 PM

Title: Cam bearing puller
Post by: LMR on September 06, 2017, 09:53:58 PM

Am I doing something wrong or are the newer cam bearing larger than the 06 model? I had a cam puller for up to 06 and tried it on the 2016 and did not catch. Seemed to have had a lot of play.

Title: Re: Cam bearing puller
Post by: Twolanerider on September 06, 2017, 11:39:11 PM

Quote from: LMR on September 06, 2017, 09:53:58 PM

Am I doing something wrong or are the newer cam bearing larger than the 06 model? I had a cam puller for up to 06 and tried it on the 2016 and did not catch. Seemed to have had a lot of play.

The engine changed in 2007 (06 on Dyna).  You'll need a new tool.

Title: Re: Cam bearing puller
Post by: Yellow09SERG on September 07, 2017, 08:50:48 PM

Depending on your brand of puller you might be able to order just the mandrel that pulls the bearings. Don't remember what brand I have but it came with both pullers and installers

Title: Re: Cam bearing puller
Post by: r0de_runr on September 07, 2017, 10:46:45 PM

I'm wondering if a wheel bearing puller would work.

But I have a cam change kit for 07 up that I loan out.  Takes a few days to get there Priority.

Greg