Topic: Lets see those side license plates! (Read 5576 times)

overkill19 · « **on:** April 02, 2017, 08:58:50 AM »

Im picking up my first Harley this week. 2013 CVO Breakout and it needs a plate relocation.
Im looking for a Chrome one for sure!
Post what ya got! Thanks!

Phreakyz · « **Reply #1 on:** April 02, 2017, 11:53:21 AM »

Be careful - Vertically mounted plates are illegal in some states...

RoadDawg · « **Reply #2 on:** April 02, 2017, 03:22:14 PM »

Here's mine.

Xkrspeedracer · « **Reply #3 on:** April 02, 2017, 08:09:33 PM »

You can take out the center bolt on the stock mount, then just turn your plate vertical on the half of three mount that's left. A lot cheaper than an axle mounted one.

overkill19 · « **Reply #4 on:** April 02, 2017, 10:11:13 PM »

Quote from: Phreakyz on April 02, 2017, 11:53:21 AM

Be careful - Vertically mounted plates are illegal in some states...

Ya i think they are up here in Alberta Canada too! Thx

overkill19 · « **Reply #5 on:** April 02, 2017, 10:12:09 PM »

Quote from: RoadDawg on April 02, 2017, 03:22:14 PM

Here's mine.

Nice! What make is it?

RoadDawg · « **Reply #6 on:** April 03, 2017, 08:01:53 AM »

In-Close License Plate Holder from Drag Specialties. Can be mounted vertically or horizontally. http://www.dragspecialties.com/products/?productId=243212

ChopperPilot · « **Reply #7 on:** April 03, 2017, 09:22:09 AM »

Quote from: Xkrspeedracer on April 02, 2017, 08:09:33 PM

You can take out the center bolt on the stock mount, then just turn your plate vertical on the half of three mount that's left. A lot cheaper than an axle mounted one.

I did the same thing, can change back to horizontal as needed.

Sierramadre · « **Reply #8 on:** April 03, 2017, 09:04:58 PM »

Here's one.

overkill19 · « **Reply #9 on:** April 04, 2017, 09:46:19 PM »

Quote from: Sierramadre on April 03, 2017, 09:04:58 PM

Here's one.

Looks great! I need to do that taillight mod too

LargeJ · « **Reply #10 on:** April 05, 2017, 03:19:27 AM »

Currently waiting on delivery of an Australian made kit that tidies up the whole rear of the bike
see attachment or goggle breakout fender fix by KPR

overkill19 · « **Reply #11 on:** April 07, 2017, 12:08:53 AM »

Quote from: LargeJ on April 05, 2017, 03:19:27 AM

Currently waiting on delivery of an Australian made kit that tidies up the whole rear of the bike
see attachment or goggle breakout fender fix by KPR

Thx
Very cool...but $$$&

jimmymccord · « **Reply #12 on:** April 10, 2017, 03:34:38 PM »

Sent from my iPhone using Tapatalk

clementonnj · « **Reply #13 on:** April 19, 2017, 07:18:42 PM »

not the best pic

clementonnj · « **Reply #14 on:** April 19, 2017, 07:50:49 PM »

Kuryakyn 3188 Side Mount License Plate Clamp
Kuryakyn Lighted Curved Vertical Side 4 x 7 Mount Plate 9251

overkill19 · « **Reply #15 on:** April 25, 2017, 07:37:46 PM »

Quote from: LargeJ on April 05, 2017, 03:19:27 AM

Currently waiting on delivery of an Australian made kit that tidies up the whole rear of the bike
see attachment or goggle breakout fender fix by KPR

Did you get yours yet?

Im curious? Is the blank section between the turn lights a brake light? Or do you still need to add a brake light?

Im kind of leaning toward option 4?

overkill19 · « **Reply #16 on:** April 26, 2017, 08:24:59 AM »

Quote from: ChopperPilot on April 03, 2017, 09:22:09 AM

I did the same thing, can change back to horizontal as needed.

Can you post a picture? I must have a different stock plate mount? Im confused as to what you guys are doing and where you are mounting this.

LargeJ · « **Reply #17 on:** May 01, 2017, 12:32:56 AM »

Have just received the kit hope to have it fitted some time this week once complete will post a couple of pictures
the piece between the indicator / break-lights is steel

overkill19 · « **Reply #18 on:** May 01, 2017, 11:14:17 AM »

Quote from: LargeJ on May 01, 2017, 12:32:56 AM

Have just received the kit hope to have it fitted some time this week once complete will post a couple of pictures
the piece between the indicator / break-lights is steel

Cool ! Which option did you go with?

LargeJ · « **Reply #19 on:** May 03, 2017, 04:39:11 AM »

went with option 5

LargeJ · « **Reply #20 on:** May 03, 2017, 09:34:14 PM »

Just had the kit fitted

cvo1717 · « **Reply #21 on:** May 04, 2017, 05:57:15 AM »

Rochviper · « **Reply #22 on:** May 04, 2017, 11:45:23 AM »

RoadDawg - What was you part #? I've call the Drag Specialties dealers and they say it doesn't fit the breakout - even though I'm looking at the picture of your bike with it installed. Thanks.

CHH_Badkarma · « **Reply #23 on:** May 04, 2017, 09:25:13 PM »

I am curious about the PN as well. Being limited to horizontal plates here in Komifornia, that plate RoadDawg has looks like the best option.
Do you happen to know how far off the ground it is? I believe there is a 12 inch minimum here.

laylonlor · « **Reply #24 on:** June 22, 2017, 04:39:28 PM »

Quote from: overkill19 on April 25, 2017, 07:37:46 PM

Did you get yours yet?

Im curious? Is the blank section between the turn lights a brake light? Or do you still need to add a brake light?

Im kind of leaning toward option 4?

harley sells a kit like this one for $150,

CHH_Badkarma · « **Reply #25 on:** June 22, 2017, 05:23:15 PM »

.....but that kit is butt ugly

Author Topic: Lets see those side license plates! (Read 5576 times)