Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 [2]  All

Author Topic: 2013 FLHTCUSE8 Bars and GPS Mount  (Read 4950 times)

0 Members and 1 Guest are viewing this topic.

Claytoninsc

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 149
    • SC


    • CVO1: FLHTCUSE8 2013
Re: 2013 FLHTCUSE8 Bars and GPS Mount
« Reply #15 on: March 14, 2018, 10:10:53 PM »

Where you able to use the existing wiring for the GPS mount? What would it cost to have one made? Installed 12 inch Yaffe Monkey bars and can not see the GPS any more.
Logged

CVOSO

  • Newbie
  • *
  • Offline Offline
  • Posts: 13
  • www.CVOHARLEY.com
    • PA


    • CVO1: 2013 FLHTCUSE8
Re: 2013 FLHTCUSE8 Bars and GPS Mount
« Reply #16 on: April 03, 2018, 07:16:43 AM »

Yes.  The original wiring for the GPS mount was used.  There is, or at least was on mine, plenty of slack for this mod.  I drilled holes to match the "AMP" specs and mounted directly to the original mount and it allowed me to use the original GPS bracket and wiring.  And as previously mentioned allows the addition/use of other "AMP" mounted products either below or behind my GPS. (Although behind might be a bit tight to the windshield.) -- Bear
Logged
Experience and education are the remedies for ignorance... there's no fix for 'stoopid'.

Claytoninsc

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 149
    • SC


    • CVO1: FLHTCUSE8 2013
Re: 2013 FLHTCUSE8 Bars and GPS Mount
« Reply #17 on: April 04, 2018, 06:19:08 PM »

Thanks for the reply.
Logged
Pages: 1 [2]  All
 

Page created in 0.119 seconds with 21 queries.