Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Ghost Rider]

Knock Werks iOMount....best mount for phone.

X 2.  I love this mount.  It may or may not be the best mount.

Your results may vary.

[BigLew]

Klock Werks iOMount

I was also concerned at first, but not no more.

I have one on my Street Glide and on my Wife's Road King.

We both toured the entire month of August, coast to coast with no problems.

I was more concerns on the Road King, since it kinda in the wind....but it is rock solid and doesn't move at all from bumps or wind.


Good Luck

Looks like it would work pretty good, but with the 14" apes it will cause me to run a really long wire to connect to the radio's sound system. Make sense

BigLew

[BigLew]

Another issue I have is because the handlebars are 1 1/2" in dia. Hared to find a mount that will wrap around them

BigLew

[Unbalanced]

Another issue I have is because the handlebars are 1 1/2" in dia. Hared to find a mount that will wrap around them

BigLew

BigLew,

If you use the ram ball check out the P-clamps by Kuryakin.   I use them on all our bikes as they come in multiple sizes to fit stock to larger diameters handlebars.   Can also call Frank at Daytona sound he is located on the Ormond HD property he usually has em in stock.

[BigLew]

BigLew,

If you use the ram ball check out the P-clamps by Kuryakin.   I use them on all our bikes as they come in multiple sizes to fit stock to larger diameters handlebars.   Can also call Frank at Daytona sound he is located on the Ormond HD property he usually has em in stock.

So how do I get up with Frank?

BigLew

[Unbalanced]

 http://www.daytonacycleaudio.com/


Sent from my iPhone using Tapatalk

[BigLew]

Still investigating, looking for a mount that will fit 1 1/2" bars

BigLew

[CVODON]

I bought the HD handlebar GPS mount, had all the components chromed that were not, ran the power thru the bars and then adapted the ball mount to a superior (costly) alloy bicycle mount for the phone. It looked very good when completed like something made for a motorcycle. Took a while waiting on chrome shop, finding a alloy mount so I could have it chromed and then taking bars apart for wiring but I just could not get over all the ugly crap that is sold for this purpose, Ram, Kurakyn etc. they all look so bad, to me, that I just would not use one.
I would post pic's but I sold the SERG and the mount went with it.

[woodzynh]

Riders Claw


Sent from my iPhone using Tapatalk

[KGB]

Still investigating, looking for a mount that will fit 1 1/2" bars

BigLew

Here’s another one I came across

https://globalsierra.com/products/bike-phone-mount




Sent from my iPhone using Tapatalk